+++ /dev/null
-diff -urN linux-2.6.20.4-0rig/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.20.4-atmel/arch/arm/configs/at91sam9263ek_defconfig
---- linux-2.6.20.4-0rig/arch/arm/configs/at91sam9263ek_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/configs/at91sam9263ek_defconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,1184 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.20-rc1
-+# Mon Jan 8 16:06:54 2007
-+#
-+CONFIG_ARM=y
-+# CONFIG_GENERIC_TIME is not set
-+CONFIG_MMU=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+# CONFIG_IOSCHED_DEADLINE is not set
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+CONFIG_ARCH_AT91SAM9263=y
-+
-+#
-+# AT91SAM9263 Board Type
-+#
-+CONFIG_MACH_AT91SAM9263EK=y
-+
-+#
-+# AT91 Board Options
-+#
-+CONFIG_MTD_AT91_DATAFLASH_CARD=y
-+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+# CONFIG_ARM_THUMB is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+
-+#
-+# Bus support
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-+# CONFIG_XIP_KERNEL is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+# CONFIG_APM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+CONFIG_IP_PNP_BOOTP=y
-+CONFIG_IP_PNP_RARP=y
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+CONFIG_BLK_DEV_INITRD=y
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_TSDEV=y
-+CONFIG_INPUT_TSDEV_SCREEN_X=240
-+CONFIG_INPUT_TSDEV_SCREEN_Y=320
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+CONFIG_I2C=y
-+CONFIG_I2C_CHARDEV=y
-+
-+#
-+# I2C Algorithms
-+#
-+# CONFIG_I2C_ALGOBIT is not set
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
-+
-+#
-+# I2C Hardware Bus support
-+#
-+CONFIG_I2C_AT91=y
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_STUB is not set
-+# CONFIG_I2C_PCA is not set
-+# CONFIG_I2C_PCA_ISA is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_TIFM_CORE is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_FIRMWARE_EDID is not set
-+CONFIG_FB=y
-+# CONFIG_FB_CFB_FILLRECT is not set
-+# CONFIG_FB_CFB_COPYAREA is not set
-+# CONFIG_FB_CFB_IMAGEBLIT is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_VIRTUAL is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+
-+#
-+# Logo configuration
-+#
-+# CONFIG_LOGO is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# HID Devices
-+#
-+CONFIG_HID=y
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_BANDWIDTH is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_MULTITHREAD_PROBE is not set
-+# CONFIG_USB_OTG is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_ISP116X_HCD is not set
-+CONFIG_USB_OHCI_HCD=y
-+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-+# CONFIG_USB_SL811_HCD is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Input Devices
-+#
-+# CONFIG_USB_HID is not set
-+
-+#
-+# USB HID Boot Protocol drivers
-+#
-+# CONFIG_USB_KBD is not set
-+# CONFIG_USB_MOUSE is not set
-+# CONFIG_USB_AIPTEK is not set
-+# CONFIG_USB_WACOM is not set
-+# CONFIG_USB_ACECAD is not set
-+# CONFIG_USB_KBTAB is not set
-+# CONFIG_USB_POWERMATE is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
-+# CONFIG_USB_XPAD is not set
-+# CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
-+# CONFIG_USB_USBNET is not set
-+CONFIG_USB_MON=y
-+
-+#
-+# USB port drivers
-+#
-+
-+#
-+# USB Serial Converter support
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_TEST is not set
-+
-+#
-+# USB DSL modem support
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+CONFIG_USB_GADGET_AT91=y
-+CONFIG_USB_AT91=y
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+# CONFIG_USB_GADGET_DUALSPEED is not set
-+CONFIG_USB_ZERO=m
-+# CONFIG_USB_ETH is not set
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_AT91=m
-+# CONFIG_MMC_TIFM_SD is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+# CONFIG_EXT3_FS is not set
-+# CONFIG_EXT4DEV_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+# CONFIG_MSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+# CONFIG_NFS_V3 is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+CONFIG_DEBUG_USER=y
-+# CONFIG_DEBUG_ERRORS is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_IOMAP_COPY=y
-diff -urN linux-2.6.20.4-0rig/arch/arm/configs/csb337_defconfig linux-2.6.20.4-atmel/arch/arm/configs/csb337_defconfig
---- linux-2.6.20.4-0rig/arch/arm/configs/csb337_defconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/configs/csb337_defconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -355,10 +355,12 @@
- # Mapping drivers for chip access
- #
- # CONFIG_MTD_COMPLEX_MAPPINGS is not set
--# CONFIG_MTD_PHYSMAP is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0
-+CONFIG_MTD_PHYSMAP_LEN=0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
- # CONFIG_MTD_ARM_INTEGRATOR is not set
- # CONFIG_MTD_PLATRAM is not set
--CONFIG_MTD_CSB337=y
-
- #
- # Self-contained MTD device drivers
-diff -urN linux-2.6.20.4-0rig/arch/arm/configs/csb637_defconfig linux-2.6.20.4-atmel/arch/arm/configs/csb637_defconfig
---- linux-2.6.20.4-0rig/arch/arm/configs/csb637_defconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/configs/csb637_defconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -355,10 +355,12 @@
- # Mapping drivers for chip access
- #
- # CONFIG_MTD_COMPLEX_MAPPINGS is not set
--# CONFIG_MTD_PHYSMAP is not set
-+CONFIG_MTD_PHYSMAP=y
-+CONFIG_MTD_PHYSMAP_START=0
-+CONFIG_MTD_PHYSMAP_LEN=0
-+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
- # CONFIG_MTD_ARM_INTEGRATOR is not set
- # CONFIG_MTD_PLATRAM is not set
--CONFIG_MTD_CSB637=y
-
- #
- # Self-contained MTD device drivers
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200.c 2007-03-24 16:39:15.000000000 +0100
-@@ -117,6 +117,36 @@
- .pmc_mask = 1 << AT91RM9200_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk tc0_clk = {
-+ .name = "tc0_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_TC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc1_clk = {
-+ .name = "tc1_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_TC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc2_clk = {
-+ .name = "tc2_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_TC2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc3_clk = {
-+ .name = "tc3_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_TC3,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc4_clk = {
-+ .name = "tc4_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_TC4,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc5_clk = {
-+ .name = "tc5_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_TC5,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-
- static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
-@@ -132,7 +162,12 @@
- &twi_clk,
- &spi_clk,
- // ssc 0 .. ssc2
-- // tc0 .. tc5
-+ &tc0_clk,
-+ &tc1_clk,
-+ &tc2_clk,
-+ &tc3_clk,
-+ &tc4_clk,
-+ &tc5_clk,
- &ohci_clk,
- ðer_clk,
- // irq0 .. irq6
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_devices.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_devices.c 2007-03-24 16:39:15.000000000 +0100
-@@ -315,7 +315,7 @@
- .num_resources = ARRAY_SIZE(mmc_resources),
- };
-
--void __init at91_add_device_mmc(struct at91_mmc_data *data)
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
- {
- if (!data)
- return;
-@@ -361,7 +361,7 @@
- platform_device_register(&at91rm9200_mmc_device);
- }
- #else
--void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
- #endif
-
-
-@@ -480,7 +480,18 @@
- * SPI
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
-+#define SPI_DEVNAME "atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
- static u64 spi_dmamask = 0xffffffffUL;
-
- static struct resource spi_resources[] = {
-@@ -497,7 +508,7 @@
- };
-
- static struct platform_device at91rm9200_spi_device = {
-- .name = "at91_spi",
-+ .name = SPI_DEVNAME,
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-@@ -594,6 +605,10 @@
-
- void __init at91_init_leds(u8 cpu_led, u8 timer_led)
- {
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
- }
-@@ -602,6 +617,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_time.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_time.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91rm9200_time.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91rm9200_time.c 2007-03-24 16:39:15.000000000 +0100
-@@ -38,7 +38,8 @@
- * The ST_CRTR is updated asynchronously to the master clock. It is therefore
- * necessary to read it twice (with the same value) to ensure accuracy.
- */
--static inline unsigned long read_CRTR(void) {
-+static inline unsigned long read_CRTR(void)
-+{
- unsigned long x1, x2;
-
- do {
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260.c 2007-03-24 16:39:15.000000000 +0100
-@@ -14,6 +14,7 @@
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-+#include <asm/arch/cpu.h>
- #include <asm/arch/at91sam9260.h>
- #include <asm/arch/at91_pmc.h>
- #include <asm/arch/at91_rstc.h>
-@@ -27,7 +28,11 @@
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
-- }, {
-+ }
-+};
-+
-+static struct map_desc at91sam9260_sram_desc[] __initdata = {
-+ {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
- .length = AT91SAM9260_SRAM0_SIZE,
-@@ -37,7 +42,14 @@
- .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
- .length = AT91SAM9260_SRAM1_SIZE,
- .type = MT_DEVICE,
-- },
-+ }
-+};
-+
-+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
-+ {
-+ .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
-+ .type = MT_DEVICE,
-+ }
- };
-
- /* --------------------------------------------------------------------
-@@ -107,13 +119,28 @@
- .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk tc0_clk = {
-+ .name = "tc0_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_TC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc1_clk = {
-+ .name = "tc1_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_TC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc2_clk = {
-+ .name = "tc2_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_TC2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
- };
--static struct clk ether_clk = {
-- .name = "ether_clk",
-+static struct clk macb_clk = {
-+ .name = "macb_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
- };
-@@ -137,6 +164,21 @@
- .pmc_mask = 1 << AT91SAM9260_ID_US5,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk tc3_clk = {
-+ .name = "tc3_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_TC3,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc4_clk = {
-+ .name = "tc4_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_TC4,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc5_clk = {
-+ .name = "tc5_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_TC5,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-
- static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
-@@ -152,14 +194,18 @@
- &spi0_clk,
- &spi1_clk,
- // ssc
-- // tc0 .. tc2
-+ &tc0_clk,
-+ &tc1_clk,
-+ &tc2_clk,
- &ohci_clk,
-- ðer_clk,
-+ &macb_clk,
- &isi_clk,
- &usart3_clk,
- &usart4_clk,
- &usart5_clk,
-- // tc3 .. tc5
-+ &tc3_clk,
-+ &tc4_clk,
-+ &tc5_clk,
- // irq0 .. irq2
- };
-
-@@ -213,7 +259,7 @@
-
- static void at91sam9260_reset(void)
- {
-- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-
-@@ -221,10 +267,36 @@
- * AT91SAM9260 processor initialization
- * -------------------------------------------------------------------- */
-
-+static void __init at91sam9xe_initialize(void)
-+{
-+ unsigned long cidr, sram_size;
-+
-+ cidr = at91_sys_read(AT91_DBGU_CIDR);
-+
-+ switch (cidr & AT91_CIDR_SRAMSIZ) {
-+ case AT91_CIDR_SRAMSIZ_32K:
-+ sram_size = 2 * SZ_16K;
-+ break;
-+ case AT91_CIDR_SRAMSIZ_16K:
-+ default:
-+ sram_size = SZ_16K;
-+ }
-+
-+ at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
-+ at91sam9xe_sram_desc->length = sram_size;
-+
-+ iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
-+}
-+
- void __init at91sam9260_initialize(unsigned long main_clock)
- {
- /* Map peripherals */
- iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
-+
-+ if (cpu_is_at91sam9xe())
-+ at91sam9xe_initialize();
-+ else
-+ iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
-
- at91_arch_reset = at91sam9260_reset;
- at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260_devices.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9260_devices.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9260_devices.c 2007-03-24 16:39:15.000000000 +0100
-@@ -128,7 +128,7 @@
-
- #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
- static u64 eth_dmamask = 0xffffffffUL;
--static struct eth_platform_data eth_data;
-+static struct at91_eth_data eth_data;
-
- static struct resource eth_resources[] = {
- [0] = {
-@@ -155,7 +155,7 @@
- .num_resources = ARRAY_SIZE(eth_resources),
- };
-
--void __init at91_add_device_eth(struct eth_platform_data *data)
-+void __init at91_add_device_eth(struct at91_eth_data *data)
- {
- if (!data)
- return;
-@@ -192,7 +192,7 @@
- platform_device_register(&at91sam9260_eth_device);
- }
- #else
--void __init at91_add_device_eth(struct eth_platform_data *data) {}
-+void __init at91_add_device_eth(struct at91_eth_data *data) {}
- #endif
-
-
-@@ -229,7 +229,7 @@
- .num_resources = ARRAY_SIZE(mmc_resources),
- };
-
--void __init at91_add_device_mmc(struct at91_mmc_data *data)
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
- {
- if (!data)
- return;
-@@ -275,7 +275,7 @@
- platform_device_register(&at91sam9260_mmc_device);
- }
- #else
--void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
- #endif
-
-
-@@ -515,6 +515,10 @@
-
- void __init at91_init_leds(u8 cpu_led, u8 timer_led)
- {
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
- }
-@@ -523,6 +527,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261.c 2007-03-24 16:39:15.000000000 +0100
-@@ -97,6 +97,21 @@
- .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk tc0_clk = {
-+ .name = "tc0_clk",
-+ .pmc_mask = 1 << AT91SAM9261_ID_TC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc1_clk = {
-+ .name = "tc1_clk",
-+ .pmc_mask = 1 << AT91SAM9261_ID_TC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc2_clk = {
-+ .name = "tc2_clk",
-+ .pmc_mask = 1 << AT91SAM9261_ID_TC2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_UHP,
-@@ -121,7 +136,9 @@
- &spi0_clk,
- &spi1_clk,
- // ssc 0 .. ssc2
-- // tc0 .. tc2
-+ &tc0_clk,
-+ &tc1_clk,
-+ &tc2_clk,
- &ohci_clk,
- &lcdc_clk,
- // irq0 .. irq2
-@@ -208,7 +225,7 @@
-
- static void at91sam9261_reset(void)
- {
-- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
- }
-
-
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261_devices.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9261_devices.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9261_devices.c 2007-03-24 16:39:15.000000000 +0100
-@@ -14,6 +14,9 @@
- #include <asm/mach/map.h>
-
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -159,7 +162,7 @@
- .num_resources = ARRAY_SIZE(mmc_resources),
- };
-
--void __init at91_add_device_mmc(struct at91_mmc_data *data)
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
- {
- if (!data)
- return;
-@@ -192,7 +195,7 @@
- platform_device_register(&at91sam9261_mmc_device);
- }
- #else
--void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
- #endif
-
-
-@@ -345,7 +348,7 @@
- .num_resources = ARRAY_SIZE(spi0_resources),
- };
-
--static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA28, AT91_PIN_PA6 };
-
- static struct resource spi1_resources[] = {
- [0] = {
-@@ -430,9 +433,9 @@
- * LCD Controller
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
- static u64 lcdc_dmamask = 0xffffffffUL;
--static struct at91fb_info lcdc_data;
-+static struct atmel_lcdfb_info lcdc_data;
-
- static struct resource lcdc_resources[] = {
- [0] = {
-@@ -455,18 +458,18 @@
- };
-
- static struct platform_device at91_lcdc_device = {
-- .name = "at91-fb",
-- .id = 0,
-- .dev = {
-- .dma_mask = &lcdc_dmamask,
-- .coherent_dma_mask = 0xffffffff,
-- .platform_data = &lcdc_data,
-+ .name = "atmel_lcdfb",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &lcdc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
- };
-
--void __init at91_add_device_lcdc(struct at91fb_info *data)
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
- {
- if (!data) {
- return;
-@@ -499,7 +502,7 @@
- platform_device_register(&at91_lcdc_device);
- }
- #else
--void __init at91_add_device_lcdc(struct at91fb_info *data) {}
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
- #endif
-
-
-@@ -513,6 +516,10 @@
-
- void __init at91_init_leds(u8 cpu_led, u8 timer_led)
- {
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
- }
-@@ -521,6 +528,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,313 @@
-+/*
-+ * arch/arm/mach-at91rm9200/at91sam9263.c
-+ *
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/at91sam9263.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+
-+#include "generic.h"
-+#include "clock.h"
-+
-+static struct map_desc at91sam9263_io_desc[] __initdata = {
-+ {
-+ .virtual = AT91_VA_BASE_SYS,
-+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
-+ .length = SZ_16K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
-+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
-+ .length = AT91SAM9263_SRAM0_SIZE,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
-+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
-+ .length = AT91SAM9263_SRAM1_SIZE,
-+ .type = MT_DEVICE,
-+ },
-+};
-+
-+/* --------------------------------------------------------------------
-+ * Clocks
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The peripheral clocks.
-+ */
-+static struct clk pioA_clk = {
-+ .name = "pioA_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioB_clk = {
-+ .name = "pioB_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioCDE_clk = {
-+ .name = "pioCDE_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart0_clk = {
-+ .name = "usart0_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_US0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart1_clk = {
-+ .name = "usart1_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_US1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart2_clk = {
-+ .name = "usart2_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_US2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mmc0_clk = {
-+ .name = "mci0_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mmc1_clk = {
-+ .name = "mci1_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twi_clk = {
-+ .name = "twi_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_TWI,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk spi0_clk = {
-+ .name = "spi0_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk spi1_clk = {
-+ .name = "spi1_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tcb_clk = {
-+ .name = "tcb_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_TCB,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk macb_clk = {
-+ .name = "macb_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk udc_clk = {
-+ .name = "udc_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_UDP,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk isi_clk = {
-+ .name = "isi_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk lcdc_clk = {
-+ .name = "lcdc_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ohci_clk = {
-+ .name = "ohci_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_UHP,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+
-+static struct clk *periph_clocks[] __initdata = {
-+ &pioA_clk,
-+ &pioB_clk,
-+ &pioCDE_clk,
-+ &usart0_clk,
-+ &usart1_clk,
-+ &usart2_clk,
-+ &mmc0_clk,
-+ &mmc1_clk,
-+ // can
-+ &twi_clk,
-+ &spi0_clk,
-+ &spi1_clk,
-+ // ssc0 .. ssc1
-+ // ac97
-+ &tcb_clk,
-+ // pwmc
-+ &macb_clk,
-+ // 2dge
-+ &udc_clk,
-+ &isi_clk,
-+ &lcdc_clk,
-+ // dma
-+ &ohci_clk,
-+ // irq0 .. irq1
-+};
-+
-+/*
-+ * The four programmable clocks.
-+ * You must configure pin multiplexing to bring these signals out.
-+ */
-+static struct clk pck0 = {
-+ .name = "pck0",
-+ .pmc_mask = AT91_PMC_PCK0,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 0,
-+};
-+static struct clk pck1 = {
-+ .name = "pck1",
-+ .pmc_mask = AT91_PMC_PCK1,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 1,
-+};
-+static struct clk pck2 = {
-+ .name = "pck2",
-+ .pmc_mask = AT91_PMC_PCK2,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 2,
-+};
-+static struct clk pck3 = {
-+ .name = "pck3",
-+ .pmc_mask = AT91_PMC_PCK3,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 3,
-+};
-+
-+static void __init at91sam9263_register_clocks(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-+ clk_register(periph_clocks[i]);
-+
-+ clk_register(&pck0);
-+ clk_register(&pck1);
-+ clk_register(&pck2);
-+ clk_register(&pck3);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * GPIO
-+ * -------------------------------------------------------------------- */
-+
-+static struct at91_gpio_bank at91sam9263_gpio[] = {
-+ {
-+ .id = AT91SAM9263_ID_PIOA,
-+ .offset = AT91_PIOA,
-+ .clock = &pioA_clk,
-+ }, {
-+ .id = AT91SAM9263_ID_PIOB,
-+ .offset = AT91_PIOB,
-+ .clock = &pioB_clk,
-+ }, {
-+ .id = AT91SAM9263_ID_PIOCDE,
-+ .offset = AT91_PIOC,
-+ .clock = &pioCDE_clk,
-+ }, {
-+ .id = AT91SAM9263_ID_PIOCDE,
-+ .offset = AT91_PIOD,
-+ .clock = &pioCDE_clk,
-+ }, {
-+ .id = AT91SAM9263_ID_PIOCDE,
-+ .offset = AT91_PIOE,
-+ .clock = &pioCDE_clk,
-+ }
-+};
-+
-+static void at91sam9263_reset(void)
-+{
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * AT91SAM9263 processor initialization
-+ * -------------------------------------------------------------------- */
-+
-+void __init at91sam9263_initialize(unsigned long main_clock)
-+{
-+ /* Map peripherals */
-+ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
-+
-+ at91_arch_reset = at91sam9263_reset;
-+ at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
-+
-+ /* Init clock subsystem */
-+ at91_clock_init(main_clock);
-+
-+ /* Register the processor-specific clocks */
-+ at91sam9263_register_clocks();
-+
-+ /* Register GPIO subsystem */
-+ at91_gpio_init(at91sam9263_gpio, 5);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Interrupt initialization
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The default interrupt priority levels (0 = lowest, 7 = highest).
-+ */
-+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
-+ 7, /* Advanced Interrupt Controller (FIQ) */
-+ 7, /* System Peripherals */
-+ 0, /* Parallel IO Controller A */
-+ 0, /* Parallel IO Controller B */
-+ 0, /* Parallel IO Controller C, D and E */
-+ 0,
-+ 0,
-+ 6, /* USART 0 */
-+ 6, /* USART 1 */
-+ 6, /* USART 2 */
-+ 0, /* Multimedia Card Interface 0 */
-+ 0, /* Multimedia Card Interface 1 */
-+ 4, /* CAN */
-+ 0, /* Two-Wire Interface */
-+ 6, /* Serial Peripheral Interface 0 */
-+ 6, /* Serial Peripheral Interface 1 */
-+ 5, /* Serial Synchronous Controller 0 */
-+ 5, /* Serial Synchronous Controller 1 */
-+ 6, /* AC97 Controller */
-+ 0, /* Timer Counter 0, 1 and 2 */
-+ 0, /* Pulse Width Modulation Controller */
-+ 3, /* Ethernet */
-+ 0,
-+ 0, /* 2D Graphic Engine */
-+ 3, /* USB Device Port */
-+ 0, /* Image Sensor Interface */
-+ 3, /* LDC Controller */
-+ 0, /* DMA Controller */
-+ 0,
-+ 3, /* USB Host port */
-+ 0, /* Advanced Interrupt Controller (IRQ0) */
-+ 0, /* Advanced Interrupt Controller (IRQ1) */
-+};
-+
-+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-+{
-+ if (!priority)
-+ priority = at91sam9263_default_irq_priority;
-+
-+ /* Initialize the AIC interrupt controller */
-+ at91_aic_init(priority);
-+
-+ /* Enable GPIO interrupts */
-+ at91_gpio_irq_setup();
-+}
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263_devices.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263_devices.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam9263_devices.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam9263_devices.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,918 @@
-+/*
-+ * arch/arm/mach-at91rm9200/at91sam9263_devices.c
-+ *
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ */
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam9263.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+#include <asm/arch/at91sam9263_matrix.h>
-+
-+#include "generic.h"
-+
-+#define SZ_512 0x00000200
-+#define SZ_256 0x00000100
-+#define SZ_16 0x00000010
-+
-+/* --------------------------------------------------------------------
-+ * USB Host
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-+static u64 ohci_dmamask = 0xffffffffUL;
-+static struct at91_usbh_data usbh_data;
-+
-+static struct resource usbh_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_UHP_BASE,
-+ .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_UHP,
-+ .end = AT91SAM9263_ID_UHP,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91_usbh_device = {
-+ .name = "at91_ohci",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &ohci_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &usbh_data,
-+ },
-+ .resource = usbh_resources,
-+ .num_resources = ARRAY_SIZE(usbh_resources),
-+};
-+
-+void __init at91_add_device_usbh(struct at91_usbh_data *data)
-+{
-+ int i;
-+
-+ if (!data)
-+ return;
-+
-+ /* Enable VBus control for UHP ports */
-+ for (i = 0; i < data->ports; i++) {
-+ if (data->vbus_pin[i])
-+ at91_set_gpio_output(data->vbus_pin[i], 0);
-+ }
-+
-+ usbh_data = *data;
-+ platform_device_register(&at91_usbh_device);
-+}
-+#else
-+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * USB Device (Gadget)
-+ * -------------------------------------------------------------------- */
-+
-+#ifdef CONFIG_USB_GADGET_AT91
-+static struct at91_udc_data udc_data;
-+
-+static struct resource udc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_UDP,
-+ .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_UDP,
-+ .end = AT91SAM9263_ID_UDP,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91_udc_device = {
-+ .name = "at91_udc",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &udc_data,
-+ },
-+ .resource = udc_resources,
-+ .num_resources = ARRAY_SIZE(udc_resources),
-+};
-+
-+void __init at91_add_device_udc(struct at91_udc_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ if (data->vbus_pin) {
-+ at91_set_gpio_input(data->vbus_pin, 0);
-+ at91_set_deglitch(data->vbus_pin, 1);
-+ }
-+
-+ /* Pullup pin is handled internally by USB device peripheral */
-+
-+ udc_data = *data;
-+ platform_device_register(&at91_udc_device);
-+}
-+#else
-+void __init at91_add_device_udc(struct at91_udc_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * Ethernet
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-+static u64 eth_dmamask = 0xffffffffUL;
-+static struct at91_eth_data eth_data;
-+
-+static struct resource eth_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_EMAC,
-+ .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_EMAC,
-+ .end = AT91SAM9263_ID_EMAC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_eth_device = {
-+ .name = "macb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = ð_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = ð_data,
-+ },
-+ .resource = eth_resources,
-+ .num_resources = ARRAY_SIZE(eth_resources),
-+};
-+
-+void __init at91_add_device_eth(struct at91_eth_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ if (data->phy_irq_pin) {
-+ at91_set_gpio_input(data->phy_irq_pin, 0);
-+ at91_set_deglitch(data->phy_irq_pin, 1);
-+ }
-+
-+ /* Pins used for MII and RMII */
-+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
-+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
-+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
-+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
-+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
-+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
-+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
-+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
-+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
-+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
-+
-+ if (!data->is_rmii) {
-+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
-+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
-+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
-+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
-+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
-+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
-+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
-+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
-+ }
-+
-+ eth_data = *data;
-+ platform_device_register(&at91sam9263_eth_device);
-+}
-+#else
-+void __init at91_add_device_eth(struct at91_eth_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * MMC / SD
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-+static u64 mmc_dmamask = 0xffffffffUL;
-+static struct at91_mmc_data mmc0_data, mmc1_data;
-+
-+static struct resource mmc0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_MCI0,
-+ .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_MCI0,
-+ .end = AT91SAM9263_ID_MCI0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_mmc0_device = {
-+ .name = "at91_mci",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &mmc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &mmc0_data,
-+ },
-+ .resource = mmc0_resources,
-+ .num_resources = ARRAY_SIZE(mmc0_resources),
-+};
-+
-+static struct resource mmc1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_MCI1,
-+ .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_MCI1,
-+ .end = AT91SAM9263_ID_MCI1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_mmc1_device = {
-+ .name = "at91_mci",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &mmc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &mmc1_data,
-+ },
-+ .resource = mmc1_resources,
-+ .num_resources = ARRAY_SIZE(mmc1_resources),
-+};
-+
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ /* input/irq */
-+ if (data->det_pin) {
-+ at91_set_gpio_input(data->det_pin, 1);
-+ at91_set_deglitch(data->det_pin, 1);
-+ }
-+ if (data->wp_pin)
-+ at91_set_gpio_input(data->wp_pin, 1);
-+ if (data->vcc_pin)
-+ at91_set_gpio_output(data->vcc_pin, 0);
-+
-+ if (mmc_id == 0) { /* MCI0 */
-+ /* CLK */
-+ at91_set_A_periph(AT91_PIN_PA12, 0);
-+
-+ if (data->slot_b) {
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA16, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA17, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA18, 1);
-+ at91_set_A_periph(AT91_PIN_PA19, 1);
-+ at91_set_A_periph(AT91_PIN_PA20, 1);
-+ }
-+ } else {
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA1, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA0, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA3, 1);
-+ at91_set_A_periph(AT91_PIN_PA4, 1);
-+ at91_set_A_periph(AT91_PIN_PA5, 1);
-+ }
-+ }
-+
-+ mmc0_data = *data;
-+ at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
-+ platform_device_register(&at91sam9263_mmc0_device);
-+ } else { /* MCI1 */
-+ /* CLK */
-+ at91_set_A_periph(AT91_PIN_PA6, 0);
-+
-+ if (data->slot_b) {
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA21, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA22, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA23, 1);
-+ at91_set_A_periph(AT91_PIN_PA24, 1);
-+ at91_set_A_periph(AT91_PIN_PA25, 1);
-+ }
-+ } else {
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA7, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA8, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA9, 1);
-+ at91_set_A_periph(AT91_PIN_PA10, 1);
-+ at91_set_A_periph(AT91_PIN_PA11, 1);
-+ }
-+ }
-+
-+ mmc1_data = *data;
-+ at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
-+ platform_device_register(&at91sam9263_mmc1_device);
-+ }
-+}
-+#else
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * NAND / SmartMedia
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-+static struct at91_nand_data nand_data;
-+
-+#define NAND_BASE AT91_CHIPSELECT_3
-+
-+static struct resource nand_resources[] = {
-+ {
-+ .start = NAND_BASE,
-+ .end = NAND_BASE + SZ_256M - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91sam9263_nand_device = {
-+ .name = "at91_nand",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nand_data,
-+ },
-+ .resource = nand_resources,
-+ .num_resources = ARRAY_SIZE(nand_resources),
-+};
-+
-+void __init at91_add_device_nand(struct at91_nand_data *data)
-+{
-+ unsigned long csa, mode;
-+
-+ if (!data)
-+ return;
-+
-+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
-+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
-+
-+ /* set the bus interface characteristics */
-+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-+
-+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-+
-+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-+
-+ if (data->bus_width_16)
-+ mode = AT91_SMC_DBW_16;
-+ else
-+ mode = AT91_SMC_DBW_8;
-+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-+
-+ /* enable pin */
-+ if (data->enable_pin)
-+ at91_set_gpio_output(data->enable_pin, 1);
-+
-+ /* ready/busy pin */
-+ if (data->rdy_pin)
-+ at91_set_gpio_input(data->rdy_pin, 1);
-+
-+ /* card detect pin */
-+ if (data->det_pin)
-+ at91_set_gpio_input(data->det_pin, 1);
-+
-+ nand_data = *data;
-+ platform_device_register(&at91sam9263_nand_device);
-+}
-+#else
-+void __init at91_add_device_nand(struct at91_nand_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * TWI (i2c)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-+
-+static struct resource twi_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_TWI,
-+ .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_TWI,
-+ .end = AT91SAM9263_ID_TWI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_twi_device = {
-+ .name = "at91_i2c",
-+ .id = -1,
-+ .resource = twi_resources,
-+ .num_resources = ARRAY_SIZE(twi_resources),
-+};
-+
-+void __init at91_add_device_i2c(void)
-+{
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PB4, 1);
-+
-+ at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PB5, 1);
-+
-+ platform_device_register(&at91sam9263_twi_device);
-+}
-+#else
-+void __init at91_add_device_i2c(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SPI
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-+static u64 spi_dmamask = 0xffffffffUL;
-+
-+static struct resource spi0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_SPI0,
-+ .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_SPI0,
-+ .end = AT91SAM9263_ID_SPI0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_spi0_device = {
-+ .name = "atmel_spi",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &spi_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = spi0_resources,
-+ .num_resources = ARRAY_SIZE(spi0_resources),
-+};
-+
-+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
-+
-+static struct resource spi1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_SPI1,
-+ .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_SPI1,
-+ .end = AT91SAM9263_ID_SPI1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_spi1_device = {
-+ .name = "atmel_spi",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &spi_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = spi1_resources,
-+ .num_resources = ARRAY_SIZE(spi1_resources),
-+};
-+
-+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-+
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-+{
-+ int i;
-+ unsigned long cs_pin;
-+ short enable_spi0 = 0;
-+ short enable_spi1 = 0;
-+
-+ /* Choose SPI chip-selects */
-+ for (i = 0; i < nr_devices; i++) {
-+ if (devices[i].controller_data)
-+ cs_pin = (unsigned long) devices[i].controller_data;
-+ else if (devices[i].bus_num == 0)
-+ cs_pin = spi0_standard_cs[devices[i].chip_select];
-+ else
-+ cs_pin = spi1_standard_cs[devices[i].chip_select];
-+
-+ if (devices[i].bus_num == 0)
-+ enable_spi0 = 1;
-+ else
-+ enable_spi1 = 1;
-+
-+ /* enable chip-select pin */
-+ at91_set_gpio_output(cs_pin, 1);
-+
-+ /* pass chip-select pin to driver */
-+ devices[i].controller_data = (void *) cs_pin;
-+ }
-+
-+ spi_register_board_info(devices, nr_devices);
-+
-+ /* Configure SPI bus(es) */
-+ if (enable_spi0) {
-+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
-+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
-+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-+
-+ at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
-+ platform_device_register(&at91sam9263_spi0_device);
-+ }
-+ if (enable_spi1) {
-+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
-+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
-+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-+
-+ at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
-+ platform_device_register(&at91sam9263_spi1_device);
-+ }
-+}
-+#else
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * LCD Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static u64 lcdc_dmamask = 0xffffffffUL;
-+static struct atmel_lcdfb_info lcdc_data;
-+
-+static struct resource lcdc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_LCDC_BASE,
-+ .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_LCDC,
-+ .end = AT91SAM9263_ID_LCDC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91_lcdc_device = {
-+ .name = "atmel_lcdfb",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &lcdc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &lcdc_data,
-+ },
-+ .resource = lcdc_resources,
-+ .num_resources = ARRAY_SIZE(lcdc_resources),
-+};
-+
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-+{
-+ if (!data) {
-+ return;
-+ }
-+
-+ /* configure PIO for LCDC */
-+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
-+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
-+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
-+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
-+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
-+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
-+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
-+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
-+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
-+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
-+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
-+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
-+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
-+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
-+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
-+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
-+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
-+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
-+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
-+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
-+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
-+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-+
-+ lcdc_data = *data;
-+ platform_device_register(&at91_lcdc_device);
-+}
-+#else
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+u8 at91_leds_cpu;
-+u8 at91_leds_timer;
-+
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
-+ at91_leds_cpu = cpu_led;
-+ at91_leds_timer = timer_led;
-+}
-+#else
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-+
-+
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * UART
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SERIAL_ATMEL)
-+
-+static struct resource dbgu_resources[] = {
-+ [0] = {
-+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
-+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_ID_SYS,
-+ .end = AT91_ID_SYS,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data dbgu_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-+};
-+
-+static struct platform_device at91sam9263_dbgu_device = {
-+ .name = "atmel_usart",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &dbgu_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = dbgu_resources,
-+ .num_resources = ARRAY_SIZE(dbgu_resources),
-+};
-+
-+static inline void configure_dbgu_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
-+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-+}
-+
-+static struct resource uart0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_US0,
-+ .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_US0,
-+ .end = AT91SAM9263_ID_US0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart0_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9263_uart0_device = {
-+ .name = "atmel_usart",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &uart0_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart0_resources,
-+ .num_resources = ARRAY_SIZE(uart0_resources),
-+};
-+
-+static inline void configure_usart0_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
-+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
-+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
-+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
-+}
-+
-+static struct resource uart1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_US1,
-+ .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_US1,
-+ .end = AT91SAM9263_ID_US1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart1_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9263_uart1_device = {
-+ .name = "atmel_usart",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &uart1_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart1_resources,
-+ .num_resources = ARRAY_SIZE(uart1_resources),
-+};
-+
-+static inline void configure_usart1_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
-+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
-+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-+}
-+
-+static struct resource uart2_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_US2,
-+ .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_US2,
-+ .end = AT91SAM9263_ID_US2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart2_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9263_uart2_device = {
-+ .name = "atmel_usart",
-+ .id = 3,
-+ .dev = {
-+ .platform_data = &uart2_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart2_resources,
-+ .num_resources = ARRAY_SIZE(uart2_resources),
-+};
-+
-+static inline void configure_usart2_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
-+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
-+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-+}
-+
-+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+struct platform_device *atmel_default_console_device; /* the serial console device */
-+
-+void __init at91_init_serial(struct at91_uart_config *config)
-+{
-+ int i;
-+
-+ /* Fill in list of supported UARTs */
-+ for (i = 0; i < config->nr_tty; i++) {
-+ switch (config->tty_map[i]) {
-+ case 0:
-+ configure_usart0_pins();
-+ at91_uarts[i] = &at91sam9263_uart0_device;
-+ at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
-+ break;
-+ case 1:
-+ configure_usart1_pins();
-+ at91_uarts[i] = &at91sam9263_uart1_device;
-+ at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
-+ break;
-+ case 2:
-+ configure_usart2_pins();
-+ at91_uarts[i] = &at91sam9263_uart2_device;
-+ at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
-+ break;
-+ case 3:
-+ configure_dbgu_pins();
-+ at91_uarts[i] = &at91sam9263_dbgu_device;
-+ at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
-+ break;
-+ default:
-+ continue;
-+ }
-+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
-+ }
-+
-+ /* Set serial console device */
-+ if (config->console_tty < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[config->console_tty];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
-+void __init at91_add_device_serial(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ATMEL_MAX_UART; i++) {
-+ if (at91_uarts[i])
-+ platform_device_register(at91_uarts[i]);
-+ }
-+}
-+#else
-+void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_add_device_serial(void) {}
-+#endif
-+
-+
-+/* -------------------------------------------------------------------- */
-+/*
-+ * These devices are always present and don't need any board-specific
-+ * setup.
-+ */
-+static int __init at91_add_standard_devices(void)
-+{
-+ return 0;
-+}
-+
-+arch_initcall(at91_add_standard_devices);
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam926x_time.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam926x_time.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/at91sam926x_time.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/at91sam926x_time.c 2007-03-24 16:39:15.000000000 +0100
-@@ -30,7 +30,6 @@
- * Returns number of microseconds since last timer interrupt. Note that interrupts
- * will have been disabled by do_gettimeofday()
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
-- * 'tick' is usecs per jiffy (linux/timex.h).
- */
- static unsigned long at91sam926x_gettimeoffset(void)
- {
-@@ -39,7 +38,7 @@
-
- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
-
-- return (unsigned long)(elapsed * 1000000) / LATCH;
-+ return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
- }
-
- /*
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-carmeva.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-carmeva.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-carmeva.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-carmeva.c 2007-03-24 16:39:15.000000000 +0100
-@@ -134,7 +134,7 @@
- /* Compact Flash */
- // at91_add_device_cf(&carmeva_cf_data);
- /* MMC */
-- at91_add_device_mmc(&carmeva_mmc_data);
-+ at91_add_device_mmc(0, &carmeva_mmc_data);
- }
-
- MACHINE_START(CARMEVA, "Carmeva")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb337.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb337.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb337.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb337.c 2007-03-24 16:39:15.000000000 +0100
-@@ -24,6 +24,8 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/interrupt.h>
-+#include <linux/mtd/physmap.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -58,6 +60,7 @@
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb337_uart_config);
-@@ -112,6 +115,91 @@
- },
- };
-
-+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-+#define CSB_FLASH_SIZE 0x800000
-+
-+static struct mtd_partition csb_flash_partitions[] = {
-+ {
-+ .name = "uMON flash",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ .mask_flags = MTD_WRITEABLE, /* read only */
-+ }
-+};
-+
-+static struct physmap_flash_data csb_flash_data = {
-+ .width = 2,
-+ .parts = csb_flash_partitions,
-+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
-+};
-+
-+static struct resource csb_flash_resources[] = {
-+ {
-+ .start = CSB_FLASH_BASE,
-+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device csb_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &csb_flash_data,
-+ },
-+ .resource = csb_flash_resources,
-+ .num_resources = ARRAY_SIZE(csb_flash_resources),
-+};
-+
-+static struct at91_gpio_led csb337_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB0,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB1,
-+ .trigger = "timer",
-+ },
-+ {
-+ .name = "led2",
-+ .gpio = AT91_PIN_PB2,
-+ }
-+};
-+
-+#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
-+static irqreturn_t switch_irq_handler(int irq, void *context)
-+{
-+ return IRQ_HANDLED;
-+}
-+
-+static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
-+{
-+ int res;
-+
-+ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
-+ if (res == 0)
-+ enable_irq_wake(irq);
-+}
-+
-+static void __init csb300_switches(void)
-+{
-+#ifdef CONFIG_CSB300_WAKE_SW0
-+ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */
-+ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
-+#endif
-+#ifdef CONFIG_CSB300_WAKE_SW1
-+ at91_set_gpio_input(AT91_PIN_PB28, 1);
-+ at91_set_deglitch(AT91_PIN_PB28, 1);
-+ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
-+#endif
-+ /* there's also SW2 at PA21, GPIO or TIOA2 */
-+}
-+#else
-+static void __init csb300_switches(void) {}
-+#endif
-+
- static void __init csb337_board_init(void)
- {
- /* Serial */
-@@ -130,7 +218,13 @@
- /* SPI */
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
-- at91_add_device_mmc(&csb337_mmc_data);
-+ at91_add_device_mmc(0, &csb337_mmc_data);
-+ /* LEDS */
-+ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
-+ /* NOR flash */
-+ platform_device_register(&csb_flash);
-+ /* Switches on CSB300 */
-+ csb300_switches();
- }
-
- MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb637.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb637.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-csb637.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-csb637.c 2007-03-24 16:39:15.000000000 +0100
-@@ -23,6 +23,7 @@
- #include <linux/mm.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
-+#include <linux/mtd/physmap.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -81,6 +82,42 @@
- .pullup_pin = AT91_PIN_PB1,
- };
-
-+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-+#define CSB_FLASH_SIZE 0x1000000
-+
-+static struct mtd_partition csb_flash_partitions[] = {
-+ {
-+ .name = "uMON flash",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ .mask_flags = MTD_WRITEABLE, /* read only */
-+ }
-+};
-+
-+static struct physmap_flash_data csb_flash_data = {
-+ .width = 2,
-+ .parts = csb_flash_partitions,
-+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
-+};
-+
-+static struct resource csb_flash_resources[] = {
-+ {
-+ .start = CSB_FLASH_BASE,
-+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device csb_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &csb_flash_data,
-+ },
-+ .resource = csb_flash_resources,
-+ .num_resources = ARRAY_SIZE(csb_flash_resources),
-+};
-+
- static void __init csb637_board_init(void)
- {
- /* Serial */
-@@ -95,6 +132,8 @@
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(NULL, 0);
-+ /* NOR flash */
-+ platform_device_register(&csb_flash);
- }
-
- MACHINE_START(CSB637, "Cogent CSB637")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-dk.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-dk.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-dk.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-dk.c 2007-03-24 16:39:15.000000000 +0100
-@@ -73,6 +73,185 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x30000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x30200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init dk_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 2 */
-+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0x00},
-+ {S1DREG_GPIO_CNF1, 0x00},
-+ {S1DREG_GPIO_CTL0, 0x08},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+ .initregs = dk_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
-+ .platform_init_video = dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource dk_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &dk_s1dfb_pdata,
-+ },
-+ .resource = dk_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+ platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -151,7 +330,7 @@
- #define DK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data dk_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource dk_flash_resource = {
-@@ -170,6 +349,13 @@
- .num_resources = 1,
- };
-
-+static struct at91_gpio_led dk_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB2,
-+ .trigger = "timer",
-+ }
-+};
-
- static void __init dk_board_init(void)
- {
-@@ -194,14 +380,16 @@
- #else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-- at91_add_device_mmc(&dk_mmc_data);
-+ at91_add_device_mmc(0, &dk_mmc_data);
- #endif
- /* NAND */
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
-+ /* LEDs */
-+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
- /* VGA */
--// dk_add_device_video();
-+ dk_add_device_video();
- }
-
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-eb9200.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-eb9200.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-eb9200.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-eb9200.c 2007-03-24 16:39:15.000000000 +0100
-@@ -109,7 +109,7 @@
- at91_add_device_spi(NULL, 0);
- /* MMC */
- /* only supports 1 or 4 bit interface, not wired through to SPI */
-- at91_add_device_mmc(&eb9200_mmc_data);
-+ at91_add_device_mmc(0, &eb9200_mmc_data);
- }
-
- MACHINE_START(ATEB9200, "Embest ATEB9200")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-ek.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-ek.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-ek.c 2007-03-24 16:39:15.000000000 +0100
-@@ -73,6 +73,187 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x40000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x40200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init ek_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 3 */
-+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
-+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
-+ {S1DREG_GPIO_CTL0, 0x00},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {0x005E, 0x9F},
-+ {0x005F, 0x00},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+ .initregs = ek_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
-+ .platform_init_video = ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource ek_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &ek_s1dfb_pdata,
-+ },
-+ .resource = ek_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+ platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -113,7 +294,7 @@
- #define EK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data ek_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource ek_flash_resource = {
-@@ -132,6 +313,18 @@
- .num_resources = 1,
- };
-
-+static struct at91_gpio_led ek_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB1,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB2,
-+ .trigger = "timer",
-+ }
-+};
-
- static void __init ek_board_init(void)
- {
-@@ -154,12 +347,14 @@
- #else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
-- at91_add_device_mmc(&ek_mmc_data);
-+ at91_add_device_mmc(0, &ek_mmc_data);
- #endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
--// ek_add_device_video();
-+ ek_add_device_video();
- }
-
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-kb9202.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-kb9202.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-kb9202.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-kb9202.c 2007-03-24 16:39:15.000000000 +0100
-@@ -122,7 +122,7 @@
- /* USB Device */
- at91_add_device_udc(&kb9202_udc_data);
- /* MMC */
-- at91_add_device_mmc(&kb9202_mmc_data);
-+ at91_add_device_mmc(0, &kb9202_mmc_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9260ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9260ek.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9260ek.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9260ek.c 2007-03-24 16:39:15.000000000 +0100
-@@ -1,5 +1,5 @@
- /*
-- * linux/arch/arm/mach-at91rm9200/board-ek.c
-+ * linux/arch/arm/mach-at91rm9200/board-sam9260ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
-@@ -118,7 +118,7 @@
- /*
- * MACB Ethernet device
- */
--static struct __initdata eth_platform_data ek_macb_data = {
-+static struct __initdata at91_eth_data ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
- };
-@@ -187,7 +187,7 @@
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
-- at91_add_device_mmc(&ek_mmc_data);
-+ at91_add_device_mmc(0, &ek_mmc_data);
- }
-
- MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9261ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9261ek.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9261ek.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9261ek.c 2007-03-24 16:39:15.000000000 +0100
-@@ -1,5 +1,5 @@
- /*
-- * linux/arch/arm/mach-at91rm9200/board-ek.c
-+ * linux/arch/arm/mach-at91rm9200/board-sam9261ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
-@@ -26,6 +26,11 @@
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/dm9000.h>
-+#include <linux/spi/ads7846.h>
-+#include <linux/fb.h>
-+#include <linux/clk.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -148,6 +153,42 @@
-
-
- /*
-+ * Touchscreen ads7843
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+
-+int ads7843_pendown_state(void)
-+{
-+ return !at91_get_gpio_value(AT91_PIN_PC2);
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+ .model = 7843,
-+ .x_min = 150, .x_max = 3830,
-+ .y_min = 190, .y_max = 3830,
-+ .vref_delay_usecs = 100,
-+ .x_plate_ohms = 450,
-+ .y_plate_ohms = 250,
-+ .pressure_max = 15000,
-+ .debounce_max = 1,
-+ .debounce_rep = 0,
-+ .debounce_tol = (~0),
-+ .get_pendown_state = ads7843_pendown_state,
-+};
-+
-+void __init at91_add_device_ts(void)
-+{
-+ /* Configure Interrupt 1 as external IRQ, with pullup */
-+ at91_set_B_periph(AT91_PIN_PC2, 1); /* IRQ0 */
-+ /* ts busy */
-+ at91_set_gpio_input(AT91_PIN_PA11, 1);
-+}
-+#else
-+void __init at91_add_device_ts(void) {}
-+#endif
-+
-+
-+/*
- * MCI (SD/MMC)
- */
- static struct at91_mmc_data __initdata ek_mmc_data = {
-@@ -204,6 +245,17 @@
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+ {
-+ .modalias = "ads7846",
-+ .chip_select = 2,
-+ .max_speed_hz = 125000 /* max sample rate at 3V */
-+ * 26, /* command + data + overhead */
-+ .bus_num = 0,
-+ .platform_data = &ads_info,
-+ .irq = AT91SAM9261_ID_IRQ0,
-+ },
-+#endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
- .modalias = "mtd_dataflash",
-@@ -222,6 +274,64 @@
- };
-
-
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D50VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+/* Driver defaults */
-+#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+#define AT91SAM9261_DEFAULT_FB_FLAGS (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .default_flags = AT91SAM9261_DEFAULT_FB_FLAGS,
-+ .power_control_pin = AT91_PIN_PA12,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -243,8 +353,12 @@
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- #else
- /* MMC */
-- at91_add_device_mmc(&ek_mmc_data);
-+ at91_add_device_mmc(0, &ek_mmc_data);
- #endif
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
-+ /* Touchscreen */
-+ at91_add_device_ts();
- }
-
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9263ek.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9263ek.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/board-sam9263ek.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/board-sam9263ek.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,297 @@
-+/*
-+ * linux/arch/arm/mach-at91rm9200/board-sam9263ek.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2007 Atmel Corporation.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
-+#include <linux/fb.h>
-+#include <linux/clk.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 2 = USART0 .. USART2
-+ * 3 = DBGU
-+ */
-+static struct at91_uart_config __initdata ek_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 2,
-+ .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
-+};
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 16.367 MHz crystal */
-+ at91sam9263_initialize(16367660);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&ek_uart_config);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9263_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * USB Host port
-+ */
-+static struct at91_usbh_data __initdata ek_usbh_data = {
-+ .ports = 2,
-+ .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
-+};
-+
-+/*
-+ * USB Device port
-+ */
-+static struct at91_udc_data __initdata ek_udc_data = {
-+ .vbus_pin = AT91_PIN_PA25,
-+ .pullup_pin = 0, /* pull-up driven by UDC */
-+};
-+
-+/*
-+ * Touchscreen ads7843
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+
-+int ads7843_pendown_state(void)
-+{
-+ return !at91_get_gpio_value(AT91_PIN_PA15);
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+ .model = 7843,
-+ .x_min = 150, .x_max = 3830,
-+ .y_min = 190, .y_max = 3830,
-+ .vref_delay_usecs = 100,
-+ .x_plate_ohms = 450,
-+ .y_plate_ohms = 250,
-+ .pressure_max = 15000,
-+ .debounce_max = 1,
-+ .debounce_rep = 0,
-+ .debounce_tol = (~0),
-+ .get_pendown_state = ads7843_pendown_state,
-+};
-+
-+void __init at91_add_device_ts(void)
-+{
-+ /* Configure Interrupt 1 as external IRQ, with pullup */
-+ at91_set_B_periph(AT91_PIN_PA15, 1); /* IRQ1 */
-+ /* ts busy */
-+ at91_set_gpio_input(AT91_PIN_PA31, 1);
-+}
-+#else
-+void __init at91_add_device_ts(void) {}
-+#endif
-+
-+/*
-+ * SPI devices.
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-+ { /* DataFlash card */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+#endif
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+ {
-+ .modalias = "ads7846",
-+ .chip_select = 3,
-+ .max_speed_hz = 125000 /* max sample rate at 3V */
-+ * 26, /* command + data + overhead */
-+ .bus_num = 0,
-+ .platform_data = &ads_info,
-+ .irq = AT91SAM9263_ID_IRQ1,
-+ },
-+#endif
-+};
-+
-+/*
-+ * MACB device
-+ */
-+static struct __initdata at91_eth_data ek_macb_data = {
-+ .is_rmii = 1,
-+};
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+ .wire4 = 1,
-+ .det_pin = AT91_PIN_PE18,
-+ .wp_pin = AT91_PIN_PE19,
-+// .vcc_pin = ... not connected
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Partition 1",
-+ .offset = 0,
-+ .size = 64 * 1024 * 1024,
-+ },
-+ {
-+ .name = "Partition 2",
-+ .offset = 64 * 1024 * 1024,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PA22,
-+ .enable_pin = AT91_PIN_PD15,
-+ .partition_info = nand_partitions,
-+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
-+ .bus_width_16 = 1,
-+#else
-+ .bus_width_16 = 0,
-+#endif
-+};
-+
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D70VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+/* Driver defaults */
-+#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+#define AT91SAM9261_DEFAULT_FB_FLAGS (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .default_flags = AT91SAM9261_DEFAULT_FB_FLAGS,
-+ .power_control_pin = AT91_PIN_PD12,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* USB Host */
-+ at91_add_device_usbh(&ek_usbh_data);
-+ /* USB Device */
-+ at91_add_device_udc(&ek_udc_data);
-+ /* select SPI clk for Dataflash card slot */
-+ at91_set_gpio_output(AT91_PIN_PE20, 1);
-+ /* SPI */
-+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* MMC */
-+ at91_add_device_mmc(1, &ek_mmc_data);
-+ /* MACB */
-+ at91_add_device_eth(&ek_macb_data);
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
-+ /* Touchscreen */
-+ at91_add_device_ts();
-+}
-+
-+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-+ /* Maintainer: Atmel */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/clock.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/clock.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/clock.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/clock.c 2007-03-24 16:39:15.000000000 +0100
-@@ -375,6 +375,7 @@
- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-
- seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
-+#warning "Hard-coded PCK"
- for (i = 0; i < 4; i++)
- seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
- seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-@@ -525,27 +526,6 @@
- return 0;
- }
-
--/*
-- * Several unused clocks may be active. Turn them off.
-- */
--static void __init at91_periphclk_reset(void)
--{
-- unsigned long reg;
-- struct clk *clk;
--
-- reg = at91_sys_read(AT91_PMC_PCSR);
--
-- list_for_each_entry(clk, &clocks, node) {
-- if (clk->mode != pmc_periph_mode)
-- continue;
--
-- if (clk->users > 0)
-- reg &= ~clk->pmc_mask;
-- }
--
-- at91_sys_write(AT91_PMC_PCDR, reg);
--}
--
- static struct clk *const standard_pmc_clocks[] __initdata = {
- /* four primary clocks */
- &clk32k,
-@@ -586,7 +566,7 @@
- pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
-
- /*
-- * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
-+ * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
-@@ -596,16 +576,10 @@
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
-- at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-- } else if (cpu_is_at91sam9260()) {
-+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-- } else if (cpu_is_at91sam9261()) {
-- uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
- }
- at91_sys_write(AT91_CKGR_PLLBR, 0);
-
-@@ -634,11 +608,34 @@
- (unsigned) main_clock / 1000000,
- ((unsigned) main_clock % 1000000) / 1000);
-
-- /* disable all programmable clocks */
-- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
-+ return 0;
-+}
-+
-+/*
-+ * Several unused clocks may be active. Turn them off.
-+ */
-+static int __init at91_clock_reset(void)
-+{
-+ unsigned long pcdr = 0;
-+ unsigned long scdr = 0;
-+ struct clk *clk;
-+
-+ list_for_each_entry(clk, &clocks, node) {
-+ if (clk->users > 0)
-+ continue;
-+
-+ if (clk->mode == pmc_periph_mode)
-+ pcdr |= clk->pmc_mask;
-+
-+ if (clk->mode == pmc_sys_mode)
-+ scdr |= clk->pmc_mask;
-+
-+ pr_debug("Clocks: disable unused %s\n", clk->name);
-+ }
-
-- /* disable all other unused peripheral clocks */
-- at91_periphclk_reset();
-+ at91_sys_write(AT91_PMC_PCDR, pcdr);
-+ at91_sys_write(AT91_PMC_SCDR, scdr);
-
- return 0;
- }
-+late_initcall(at91_clock_reset);
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/generic.h linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/generic.h
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/generic.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/generic.h 2007-03-24 16:39:15.000000000 +0100
-@@ -12,11 +12,13 @@
- extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
- extern void __init at91sam9260_initialize(unsigned long main_clock);
- extern void __init at91sam9261_initialize(unsigned long main_clock);
-+extern void __init at91sam9263_initialize(unsigned long main_clock);
-
- /* Interrupts */
- extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
-+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
- extern void __init at91_aic_init(unsigned int priority[]);
-
- /* Timer */
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/ics1523.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/ics1523.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/ics1523.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/ics1523.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,207 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ * Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+ int sclock;
-+
-+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+ if (sclock % 10 >= 5)
-+ sclock = (sclock /10) - 5;
-+ else
-+ sclock = (sclock /10)- 6;
-+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
-+
-+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ /* Wait TXcomplete ... */
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ }
-+
-+ if (Status & AT91_TWI_TXCOMP) {
-+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+ return ICS1523_ACCESS_OK;
-+ }
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_THR, data_out);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ if (Status & AT91_TWI_ERROR) {
-+ /* If Underrun OR NACK - Start again */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+ }
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ };
-+
-+ if (Status & AT91_TWI_TXCOMP)
-+ return ICS1523_ACCESS_OK;
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+ int nb_trial;
-+ int ack = ICS1523_ACCESS_OK;
-+ unsigned int status = 0xffffffff;
-+ struct clk *twi_clk;
-+
-+ /* Map in TWI peripheral */
-+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+ if (!twi_base)
-+ return -ENOMEM;
-+
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PA25, 1);
-+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+ /* Enable the TWI clock */
-+ twi_clk = clk_get(NULL, "twi_clk");
-+ if (IS_ERR(twi_clk))
-+ return ICS1523_ACCESS_ERROR;
-+ clk_enable(twi_clk);
-+
-+ /* Disable interrupts */
-+ at91_twi_write(AT91_TWI_IDR, -1);
-+
-+ /* Reset peripheral */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+ /* Set Master mode */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+ /* Set TWI Clock Waveform Generator Register */
-+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
-+
-+ /* ICS1523 Initialisation */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+ nb_trial = 0;
-+ do {
-+ nb_trial++;
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ /* All done - cleanup */
-+ iounmap(twi_base);
-+ clk_disable(twi_clk);
-+ clk_put(twi_clk);
-+
-+ return ack;
-+}
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Kconfig linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Kconfig
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Kconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -9,11 +9,14 @@
- bool "AT91RM9200"
-
- config ARCH_AT91SAM9260
-- bool "AT91SAM9260"
-+ bool "AT91SAM9260 or AT91SAM9XE"
-
- config ARCH_AT91SAM9261
- bool "AT91SAM9261"
-
-+config ARCH_AT91SAM9263
-+ bool "AT91SAM9263"
-+
- endchoice
-
- # ----------------------------------------------------------
-@@ -90,13 +93,22 @@
-
- if ARCH_AT91SAM9260
-
--comment "AT91SAM9260 Board Type"
-+comment "AT91SAM9260 Variants"
-+
-+config ARCH_AT91SAM9260_SAM9XE
-+ bool "AT91SAM9XE"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
-+ They are basicaly AT91SAM9260s with various sizes of embedded Flash.
-+
-+comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
- config MACH_AT91SAM9260EK
-- bool "Atmel AT91SAM9260-EK Evaluation Kit"
-+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- depends on ARCH_AT91SAM9260
- help
-- Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
-+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
- endif
-@@ -118,21 +130,50 @@
-
- # ----------------------------------------------------------
-
-+if ARCH_AT91SAM9263
-+
-+comment "AT91SAM9263 Board Type"
-+
-+config MACH_AT91SAM9263EK
-+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
-+ depends on ARCH_AT91SAM9263
-+ help
-+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-+
-+endif
-+
-+# ----------------------------------------------------------
-+
- comment "AT91 Board Options"
-
- config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
-- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
-+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
- help
- Enable support for the DataFlash card.
-
- config MTD_NAND_AT91_BUSWIDTH_16
- bool "Enable 16-bit data bus interface to NAND flash"
-- depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
-+ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK || MACH_AT91SAM9263EK)
- help
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
-+config CSB300_WAKE_SW0
-+ bool "CSB300 SW0 irq0 wakeup"
-+ depends on MACH_CSB337 && PM
-+ help
-+ If you have a CSB300 connected to your CSB337, this lets
-+ SW0 serve as a wakeup button. It uses IRQ0.
-+
-+config CSB300_WAKE_SW1
-+ bool "CSB300 SW1 gpio wakeup"
-+ depends on MACH_CSB337 && PM
-+ help
-+ If you have a CSB300 connected to your CSB337, this lets
-+ SW1 serve as a wakeup button. It uses GPIO.
-+
- # ----------------------------------------------------------
-
- comment "AT91 Feature Selections"
-@@ -143,6 +184,13 @@
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-+config AT91_SLOW_CLOCK
-+ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
-+ depends on PM && EXPERIMENTAL
-+ help
-+ Select this if you wish to put the CPU into slow clock mode
-+ while in the "Suspend to RAM" state, to save more power.
-+
- endmenu
-
- endif
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/leds.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/leds.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/leds.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/leds.c 2007-03-24 16:39:15.000000000 +0100
-@@ -86,10 +86,6 @@
- if (!at91_leds_timer || !at91_leds_cpu)
- return -ENODEV;
-
-- /* Enable PIO to access the LEDs */
-- at91_set_gpio_output(at91_leds_timer, 1);
-- at91_set_gpio_output(at91_leds_cpu, 1);
--
- leds_event = at91_leds_event;
-
- leds_event(led_start);
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Makefile linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Makefile
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/Makefile 2007-03-24 16:39:15.000000000 +0100
-@@ -8,11 +8,13 @@
- obj- :=
-
- obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
-
- # CPU-specific support
- obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
-+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
-
- # AT91RM9200 board-specific support
- obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-@@ -31,6 +33,9 @@
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-
-+# AT91SAM9263 board-specific support
-+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-+
- # LEDs support
- led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
- led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
-@@ -41,7 +46,7 @@
- obj-$(CONFIG_LEDS) += $(led-y)
-
- # VGA support
--#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-
-
- ifeq ($(CONFIG_PM_DEBUG),y)
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm.c linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm.c
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm.c 2007-03-24 16:39:15.000000000 +0100
-@@ -63,6 +63,7 @@
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-+#warning "SAM9260 only has 3 programmable clocks."
- static int at91_pm_verify_clocks(void)
- {
- unsigned long scsr;
-@@ -80,6 +81,8 @@
- #warning "Check SAM9260 USB clocks"
- } else if (cpu_is_at91sam9261()) {
- #warning "Check SAM9261 USB clocks"
-+ } else if (cpu_is_at91sam9263()) {
-+#warning "Check SAM9263 USB clocks"
- }
-
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-@@ -205,16 +208,23 @@
- .enter = at91_pm_enter,
- };
-
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91rm9200_slow_clock(void);
-+extern u32 at91rm9200_slow_clock_sz;
-+#endif
-+
- static int __init at91_pm_init(void)
- {
-- printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-- /* REVISIT allocations of SRAM should be dynamically managed.
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+ /*
-+ * REVISIT allocations of SRAM should be dynamically managed.
- * FIQ handlers and other components will want SRAM/TCM too...
- */
-- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-+ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+ printk("AT91: Power Management (with slow clock mode)\n");
-+#else
-+ printk("AT91: Power Management\n");
- #endif
-
- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-diff -urN linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm_slowclock.S linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm_slowclock.S
---- linux-2.6.20.4-0rig/arch/arm/mach-at91rm9200/pm_slowclock.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mach-at91rm9200/pm_slowclock.S 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,172 @@
-+/*
-+ * arch/arm/mach-at91rm9200/pm_slow_clock.S
-+ *
-+ * Copyright (C) 2006 Savin Zlobec
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#define MCKRDY_TIMEOUT 1000
-+#define MOSCRDY_TIMEOUT 1000
-+#define PLLALOCK_TIMEOUT 1000
-+
-+ .macro wait_mckrdy
-+ mov r2, #MCKRDY_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_MCKRDY
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_moscrdy
-+ mov r2, #MOSCRDY_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_MOSCS
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_pllalock
-+ mov r2, #PLLALOCK_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_LOCKA
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_plladis
-+ mov r2, #PLLALOCK_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_LOCKA
-+ bne 1b
-+2:
-+ .endm
-+
-+ .text
-+
-+ENTRY(at91rm9200_slow_clock)
-+
-+ ldr r1, .at91_va_base_sys
-+
-+ /* Put SDRAM in self refresh mode */
-+
-+ b 1f
-+ .align 5
-+1: mcr p15, 0, r0, c7, c10, 4
-+ mov r2, #1
-+ str r2, [r1, #AT91_SDRAMC_SRR]
-+
-+ /* Save Master clock setting */
-+
-+ ldr r2, [r1, #AT91_PMC_MCKR]
-+ str r2, .saved_mckr
-+
-+ /*
-+ * Set the Master clock source to slow clock
-+ *
-+ * First set the CSS field, wait for MCKRDY
-+ * and than set the PRES and MDIV fields.
-+ *
-+ * See eratta #2[78] for details.
-+ */
-+
-+ bic r2, r2, #3
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+ mov r2, #0
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ /* Save PLLA setting and disable it */
-+
-+ ldr r2, [r1, #AT91_CKGR_PLLAR]
-+ str r2, .saved_pllar
-+
-+ mov r2, #0
-+ str r2, [r1, #AT91_CKGR_PLLAR]
-+
-+ wait_plladis
-+
-+ /* Turn off the main oscillator */
-+
-+ ldr r2, [r1, #AT91_CKGR_MOR]
-+ bic r2, r2, #AT91_PMC_MOSCEN
-+ str r2, [r1, #AT91_CKGR_MOR]
-+
-+ /* Wait for interrupt */
-+
-+ mcr p15, 0, r0, c7, c0, 4
-+
-+ /* Turn on the main oscillator */
-+
-+ ldr r2, [r1, #AT91_CKGR_MOR]
-+ orr r2, r2, #AT91_PMC_MOSCEN
-+ str r2, [r1, #AT91_CKGR_MOR]
-+
-+ wait_moscrdy
-+
-+ /* Restore PLLA setting */
-+
-+ ldr r2, .saved_pllar
-+ str r2, [r1, #AT91_CKGR_PLLAR]
-+
-+ wait_pllalock
-+
-+ /*
-+ * Restore master clock setting
-+ *
-+ * First set PRES if it was not 0,
-+ * than set CSS and MDIV fields.
-+ * After every change wait for
-+ * MCKRDY.
-+ *
-+ * See eratta #2[78] for details.
-+ */
-+
-+ ldr r2, .saved_mckr
-+ tst r2, #0x1C
-+ beq 2f
-+ and r2, r2, #0x1C
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+2: ldr r2, .saved_mckr
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+ mov pc, lr
-+
-+.saved_mckr:
-+ .word 0
-+
-+.saved_pllar:
-+ .word 0
-+
-+.at91_va_base_sys:
-+ .word AT91_VA_BASE_SYS
-+
-+ENTRY(at91rm9200_slow_clock_sz)
-+ .word .-at91rm9200_slow_clock
-diff -urN linux-2.6.20.4-0rig/arch/arm/mm/Kconfig linux-2.6.20.4-atmel/arch/arm/mm/Kconfig
---- linux-2.6.20.4-0rig/arch/arm/mm/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/arm/mm/Kconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -171,8 +171,8 @@
- # ARM926T
- config CPU_ARM926T
- bool "Support ARM926T processor"
-- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
-- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
-+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
-+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263
- select CPU_32v5
- select CPU_ABRT_EV5TJ
- select CPU_CACHE_VIVT
-diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/atstk1002.c linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/atstk1002.c
---- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/atstk1002.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/atstk1002.c 2007-03-24 16:42:29.000000000 +0100
-@@ -14,11 +14,17 @@
- #include <linux/platform_device.h>
- #include <linux/string.h>
- #include <linux/types.h>
-+#include <linux/spi/spi.h>
-
- #include <asm/io.h>
- #include <asm/setup.h>
-+#include <asm/arch/at32ap7000.h>
- #include <asm/arch/board.h>
- #include <asm/arch/init.h>
-+#include <asm/arch/portmux.h>
-+
-+
-+#define SW2_DEFAULT /* MMCI and UART_A available */
-
- struct eth_addr {
- u8 addr[6];
-@@ -29,6 +35,20 @@
- static struct eth_platform_data __initdata eth_data[2];
- extern struct lcdc_platform_data atstk1000_fb0_data;
-
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+ {
-+ /* QVGA display */
-+ .modalias = "ltv350qv",
-+ .max_speed_hz = 16000000,
-+ .chip_select = 1,
-+ },
-+};
-+
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -86,25 +106,58 @@
-
- void __init setup_board(void)
- {
-- at32_map_usart(1, 0); /* /dev/ttyS0 */
-- at32_map_usart(2, 1); /* /dev/ttyS1 */
-- at32_map_usart(3, 2); /* /dev/ttyS2 */
-+#ifdef SW2_DEFAULT
-+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
-+#else
-+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
-+#endif
-+ /* USART 2/unused: expansion connector */
-+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
-
- at32_setup_serial_console(0);
- }
-
- static int __init atstk1002_init(void)
- {
-+ /*
-+ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
-+ * SDRAM-specific pins so that nobody messes with them.
-+ */
-+ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
-+ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
-+ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
-+ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
-+ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
-+ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
-+ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
-+ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
-+ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
-+ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
-+ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
-+ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
-+ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
-+ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
-+ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
-+ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
-+ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
-+
- at32_add_system_devices();
-
-+#ifdef SW2_DEFAULT
- at32_add_device_usart(0);
-+#else
- at32_add_device_usart(1);
-+#endif
- at32_add_device_usart(2);
-
- set_hw_addr(at32_add_device_eth(0, ð_data[0]));
-
-- at32_add_device_spi(0);
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_twi(0);
-+ at32_add_device_mci(0, &mci0_data);
- at32_add_device_lcdc(0, &atstk1000_fb0_data);
-+ at32_add_device_usba(0);
-+ at32_add_device_abdac(0);
-
- return 0;
- }
-diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/Makefile linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/Makefile
---- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/Makefile 2007-03-24 16:42:28.000000000 +0100
-@@ -1,2 +1,2 @@
--obj-y += setup.o spi.o flash.o
-+obj-y += setup.o flash.o
- obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
-diff -urN linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/spi.c linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/spi.c
---- linux-2.6.20.4-0rig/arch/avr32/boards/atstk1000/spi.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/boards/atstk1000/spi.c 1970-01-01 01:00:00.000000000 +0100
-@@ -1,27 +0,0 @@
--/*
-- * ATSTK1000 SPI devices
-- *
-- * Copyright (C) 2005 Atmel Norway
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#include <linux/device.h>
--#include <linux/spi/spi.h>
--
--static struct spi_board_info spi_board_info[] __initdata = {
-- {
-- .modalias = "ltv350qv",
-- .max_speed_hz = 16000000,
-- .bus_num = 0,
-- .chip_select = 1,
-- },
--};
--
--static int board_init_spi(void)
--{
-- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-- return 0;
--}
--arch_initcall(board_init_spi);
-diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.c linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.c
---- linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
-+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
-+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
-+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
-+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
-+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
-+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
-+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ return i;
-+}
-+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
-+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
-+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
-+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
-+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
-+
-+ return block;
-+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
-+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
-+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
-+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
-+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
-+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
-+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
-+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
-+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
-+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
-+
-+ chan->nr_blocks = req->periods;
-+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
-+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
-+
-+ chan->direction = direction;
-+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
-+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
-+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
-+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
-+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
-+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
-+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
-+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
-+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+
-+ return 0;
-+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
-+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ set_channel_bit(dmac, CH_EN, channel);
-+
-+ return 0;
-+}
-+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
-+
-+ return current_pos;
-+}
-+
-+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
-+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
-+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
-+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
-+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static void dmac_error(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
-+
-+ while (status) {
-+ struct dma_request *req;
-+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
-+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
-+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
-+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
-+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
-+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
-+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
-+
-+ spin_lock(&dmac->lock);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
-+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
-+ }
-+
-+ spin_unlock(&dmac->lock);
-+ return ret;
-+}
-+
-+static int __devinit dmac_probe(struct platform_device *pdev)
-+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
-+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
-+ }
-+ clk_enable(dmac->hclk);
-+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
-+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
-+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ SA_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
-+
-+ register_dma_controller(&dmac->dma);
-+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
-+
-+ return 0;
-+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
-+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
-+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
-+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
-+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.h linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.h
---- linux-2.6.20.4-0rig/arch/avr32/drivers/dw-dmac.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/drivers/dw-dmac.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
-+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
-+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
-+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
-+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
-+
-+#define DW_DMAC_STATUS_INT 0x360
-+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
-+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff -urN linux-2.6.20.4-0rig/arch/avr32/drivers/Makefile linux-2.6.20.4-atmel/arch/avr32/drivers/Makefile
---- linux-2.6.20.4-0rig/arch/avr32/drivers/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/drivers/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff -urN linux-2.6.20.4-0rig/arch/avr32/Kconfig linux-2.6.20.4-atmel/arch/avr32/Kconfig
---- linux-2.6.20.4-0rig/arch/avr32/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -112,6 +112,8 @@
- bool "U-Boot (or similar) bootloader"
- endchoice
-
-+source "arch/avr32/mach-at32ap/Kconfig"
-+
- config LOAD_ADDRESS
- hex
- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
-@@ -160,6 +162,10 @@
- enabling Nexus-compliant debuggers to keep track of the PID of the
- currently executing task.
-
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
-
- source "kernel/Kconfig.hz"
-@@ -195,6 +201,8 @@
-
- source "fs/Kconfig"
-
-+source "arch/avr32/oprofile/Kconfig"
-+
- source "arch/avr32/Kconfig.debug"
-
- source "security/Kconfig"
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/cpu.c linux-2.6.20.4-atmel/arch/avr32/kernel/cpu.c
---- linux-2.6.20.4-0rig/arch/avr32/kernel/cpu.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/cpu.c 2007-03-24 16:42:28.000000000 +0100
-@@ -9,6 +9,7 @@
- #include <linux/sysdev.h>
- #include <linux/seq_file.h>
- #include <linux/cpu.h>
-+#include <linux/module.h>
- #include <linux/percpu.h>
- #include <linux/param.h>
- #include <linux/errno.h>
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/dma-controller.c linux-2.6.20.4-atmel/arch/avr32/kernel/dma-controller.c
---- linux-2.6.20.4-0rig/arch/avr32/kernel/dma-controller.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/dma-controller.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
-+
-+static LIST_HEAD(controllers);
-+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+ static int next_id;
-+
-+ dmac->id = next_id++;
-+ list_add_tail(&dmac->list, &controllers);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(register_dma_controller);
-+
-+struct dma_controller *find_dma_controller(int id)
-+{
-+ struct dma_controller *dmac;
-+
-+ list_for_each_entry(dmac, &controllers, list)
-+ if (dmac->id == id)
-+ return dmac;
-+ return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/irq.c linux-2.6.20.4-atmel/arch/avr32/kernel/irq.c
---- linux-2.6.20.4-0rig/arch/avr32/kernel/irq.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/irq.c 2007-03-24 16:42:28.000000000 +0100
-@@ -57,6 +57,7 @@
- seq_printf(p, "%3d: ", i);
- for_each_online_cpu(cpu)
- seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
-+ seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-");
- seq_printf(p, " %s", action->name);
- for (action = action->next; action; action = action->next)
- seq_printf(p, ", %s", action->name);
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/Makefile linux-2.6.20.4-atmel/arch/avr32/kernel/Makefile
---- linux-2.6.20.4-0rig/arch/avr32/kernel/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -9,6 +9,7 @@
- obj-y += setup.o traps.o semaphore.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
-
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/setup.c linux-2.6.20.4-atmel/arch/avr32/kernel/setup.c
---- linux-2.6.20.4-0rig/arch/avr32/kernel/setup.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/setup.c 2007-03-24 16:42:28.000000000 +0100
-@@ -16,6 +16,7 @@
- #include <linux/module.h>
- #include <linux/root_dev.h>
- #include <linux/cpu.h>
-+#include <linux/kernel.h>
-
- #include <asm/sections.h>
- #include <asm/processor.h>
-@@ -174,8 +175,7 @@
- * Copy the data so the bootmem init code doesn't need to care
- * about it.
- */
-- if (mem_range_next_free >=
-- (sizeof(mem_range_cache) / sizeof(mem_range_cache[0])))
-+ if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
- panic("Physical memory map too complex!\n");
-
- new = &mem_range_cache[mem_range_next_free++];
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/syscall_table.S linux-2.6.20.4-atmel/arch/avr32/kernel/syscall_table.S
---- linux-2.6.20.4-0rig/arch/avr32/kernel/syscall_table.S 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/syscall_table.S 2007-03-24 16:42:28.000000000 +0100
-@@ -8,14 +8,6 @@
- * published by the Free Software Foundation.
- */
-
--#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
--#define sys_nfsservctl sys_ni_syscall
--#endif
--
--#if !defined(CONFIG_SYSV_IPC)
--# define sys_ipc sys_ni_syscall
--#endif
--
- .section .rodata,"a",@progbits
- .type sys_call_table,@object
- .global sys_call_table
-@@ -129,7 +121,7 @@
- .long sys_getitimer /* 105 */
- .long sys_swapoff
- .long sys_sysinfo
-- .long sys_ipc
-+ .long sys_ni_syscall /* was sys_ipc briefly */
- .long sys_sendfile
- .long sys_setdomainname /* 110 */
- .long sys_newuname
-@@ -287,4 +279,16 @@
- .long sys_tee
- .long sys_vmsplice
- .long __sys_epoll_pwait /* 265 */
-+ .long sys_msgget
-+ .long sys_msgsnd
-+ .long sys_msgrcv
-+ .long sys_msgctl
-+ .long sys_semget /* 270 */
-+ .long sys_semop
-+ .long sys_semctl
-+ .long sys_semtimedop
-+ .long sys_shmat
-+ .long sys_shmget /* 275 */
-+ .long sys_shmdt
-+ .long sys_shmctl
- .long sys_ni_syscall /* r8 is saturated at nr_syscalls */
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/time.c linux-2.6.20.4-atmel/arch/avr32/kernel/time.c
---- linux-2.6.20.4-0rig/arch/avr32/kernel/time.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/time.c 2007-03-24 16:42:29.000000000 +0100
-@@ -21,6 +21,7 @@
- #include <linux/profile.h>
- #include <linux/sysdev.h>
-
-+#include <asm/intc.h>
- #include <asm/div64.h>
- #include <asm/sysreg.h>
- #include <asm/io.h>
-@@ -136,6 +137,10 @@
- {
- unsigned int count;
-
-+ /* Check if interrupt is timer or performance counters */
-+ if (!(intc_get_pending(irq) & 1))
-+ return IRQ_NONE;
-+
- /* ack timer interrupt and try to set next interrupt */
- count = avr32_hpt_read();
- avr32_timer_ack();
-@@ -164,7 +169,7 @@
-
- static struct irqaction timer_irqaction = {
- .handler = timer_interrupt,
-- .flags = IRQF_DISABLED,
-+ .flags = IRQF_DISABLED|IRQF_SHARED,
- .name = "timer",
- };
-
-diff -urN linux-2.6.20.4-0rig/arch/avr32/kernel/traps.c linux-2.6.20.4-atmel/arch/avr32/kernel/traps.c
---- linux-2.6.20.4-0rig/arch/avr32/kernel/traps.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/kernel/traps.c 2007-03-24 16:42:28.000000000 +0100
-@@ -49,39 +49,45 @@
- return;
- }
-
-+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
-+{
-+ return (p > (unsigned long)tinfo)
-+ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
-+}
-+
- #ifdef CONFIG_FRAME_POINTER
- static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
- struct pt_regs *regs)
- {
-- unsigned long __user *fp;
-- unsigned long __user *last_fp = NULL;
-+ unsigned long lr, fp;
-+ struct thread_info *tinfo;
-
-- if (regs) {
-- fp = (unsigned long __user *)regs->r7;
-- } else if (tsk == current) {
-- register unsigned long __user *real_fp __asm__("r7");
-- fp = real_fp;
-- } else {
-- fp = (unsigned long __user *)tsk->thread.cpu_context.r7;
-- }
-+ tinfo = (struct thread_info *)
-+ ((unsigned long)sp & ~(THREAD_SIZE - 1));
-+
-+ if (regs)
-+ fp = regs->r7;
-+ else if (tsk == current)
-+ asm("mov %0, r7" : "=r"(fp));
-+ else
-+ fp = tsk->thread.cpu_context.r7;
-
- /*
-- * Walk the stack until (a) we get an exception, (b) the frame
-- * pointer becomes zero, or (c) the frame pointer gets stuck
-- * at the same value.
-+ * Walk the stack as long as the frame pointer (a) is within
-+ * the kernel stack of the task, and (b) it doesn't move
-+ * downwards.
- */
-- while (fp && fp != last_fp) {
-- unsigned long lr, new_fp = 0;
--
-- last_fp = fp;
-- if (__get_user(lr, fp))
-- break;
-- if (fp && __get_user(new_fp, fp + 1))
-- break;
-- fp = (unsigned long __user *)new_fp;
-+ while (valid_stack_ptr(tinfo, fp)) {
-+ unsigned long new_fp;
-
-+ lr = *(unsigned long *)fp;
- printk(" [<%08lx>] ", lr);
- print_symbol("%s\n", lr);
-+
-+ new_fp = *(unsigned long *)(fp + 4);
-+ if (new_fp <= fp)
-+ break;
-+ fp = new_fp;
- }
- printk("\n");
- }
-diff -urN linux-2.6.20.4-0rig/arch/avr32/lib/libgcc.h linux-2.6.20.4-atmel/arch/avr32/lib/libgcc.h
---- linux-2.6.20.4-0rig/arch/avr32/lib/libgcc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/lib/libgcc.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,33 +0,0 @@
--/* Definitions for various functions 'borrowed' from gcc-3.4.3 */
--
--#define BITS_PER_UNIT 8
--
--typedef int QItype __attribute__ ((mode (QI)));
--typedef unsigned int UQItype __attribute__ ((mode (QI)));
--typedef int HItype __attribute__ ((mode (HI)));
--typedef unsigned int UHItype __attribute__ ((mode (HI)));
--typedef int SItype __attribute__ ((mode (SI)));
--typedef unsigned int USItype __attribute__ ((mode (SI)));
--typedef int DItype __attribute__ ((mode (DI)));
--typedef unsigned int UDItype __attribute__ ((mode (DI)));
--typedef float SFtype __attribute__ ((mode (SF)));
--typedef float DFtype __attribute__ ((mode (DF)));
--typedef int word_type __attribute__ ((mode (__word__)));
--
--#define W_TYPE_SIZE (4 * BITS_PER_UNIT)
--#define Wtype SItype
--#define UWtype USItype
--#define HWtype SItype
--#define UHWtype USItype
--#define DWtype DItype
--#define UDWtype UDItype
--#define __NW(a,b) __ ## a ## si ## b
--#define __NDW(a,b) __ ## a ## di ## b
--
--struct DWstruct {Wtype high, low;};
--
--typedef union
--{
-- struct DWstruct s;
-- DWtype ll;
--} DWunion;
-diff -urN linux-2.6.20.4-0rig/arch/avr32/lib/longlong.h linux-2.6.20.4-atmel/arch/avr32/lib/longlong.h
---- linux-2.6.20.4-0rig/arch/avr32/lib/longlong.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/lib/longlong.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,98 +0,0 @@
--/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
-- Copyright (C) 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-- Free Software Foundation, Inc.
--
-- This definition file is free software; you can redistribute it
-- and/or modify it under the terms of the GNU General Public
-- License as published by the Free Software Foundation; either
-- version 2, or (at your option) any later version.
--
-- This definition file is distributed in the hope that it will be
-- useful, but WITHOUT ANY WARRANTY; without even the implied
-- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-- See the GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place - Suite 330,
-- Boston, MA 02111-1307, USA. */
--
--/* Borrowed from gcc-3.4.3 */
--
--#define __BITS4 (W_TYPE_SIZE / 4)
--#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
--#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
--#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
--
--#define count_leading_zeros(count, x) ((count) = __builtin_clz(x))
--
--#define __udiv_qrnnd_c(q, r, n1, n0, d) \
-- do { \
-- UWtype __d1, __d0, __q1, __q0; \
-- UWtype __r1, __r0, __m; \
-- __d1 = __ll_highpart (d); \
-- __d0 = __ll_lowpart (d); \
-- \
-- __r1 = (n1) % __d1; \
-- __q1 = (n1) / __d1; \
-- __m = (UWtype) __q1 * __d0; \
-- __r1 = __r1 * __ll_B | __ll_highpart (n0); \
-- if (__r1 < __m) \
-- { \
-- __q1--, __r1 += (d); \
-- if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
-- if (__r1 < __m) \
-- __q1--, __r1 += (d); \
-- } \
-- __r1 -= __m; \
-- \
-- __r0 = __r1 % __d1; \
-- __q0 = __r1 / __d1; \
-- __m = (UWtype) __q0 * __d0; \
-- __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
-- if (__r0 < __m) \
-- { \
-- __q0--, __r0 += (d); \
-- if (__r0 >= (d)) \
-- if (__r0 < __m) \
-- __q0--, __r0 += (d); \
-- } \
-- __r0 -= __m; \
-- \
-- (q) = (UWtype) __q1 * __ll_B | __q0; \
-- (r) = __r0; \
-- } while (0)
--
--#define udiv_qrnnd __udiv_qrnnd_c
--
--#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-- do { \
-- UWtype __x; \
-- __x = (al) - (bl); \
-- (sh) = (ah) - (bh) - (__x > (al)); \
-- (sl) = __x; \
-- } while (0)
--
--#define umul_ppmm(w1, w0, u, v) \
-- do { \
-- UWtype __x0, __x1, __x2, __x3; \
-- UHWtype __ul, __vl, __uh, __vh; \
-- \
-- __ul = __ll_lowpart (u); \
-- __uh = __ll_highpart (u); \
-- __vl = __ll_lowpart (v); \
-- __vh = __ll_highpart (v); \
-- \
-- __x0 = (UWtype) __ul * __vl; \
-- __x1 = (UWtype) __ul * __vh; \
-- __x2 = (UWtype) __uh * __vl; \
-- __x3 = (UWtype) __uh * __vh; \
-- \
-- __x1 += __ll_highpart (__x0);/* this can't give carry */ \
-- __x1 += __x2; /* but this indeed can */ \
-- if (__x1 < __x2) /* did we get it? */ \
-- __x3 += __ll_B; /* yes, add it in the proper pos. */ \
-- \
-- (w1) = __x3 + __ll_highpart (__x1); \
-- (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
-- } while (0)
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/at32ap7000.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/at32ap7000.c
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/at32ap7000.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/at32ap7000.c 2007-03-24 16:42:29.000000000 +0100
-@@ -8,6 +8,7 @@
- #include <linux/clk.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-
- #include <asm/io.h>
-
-@@ -310,8 +311,6 @@
- {
- u32 control;
-
-- BUG_ON(clk->index > 7);
--
- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
- if (enabled)
- control |= SM_BIT(CEN);
-@@ -325,11 +324,6 @@
- u32 control;
- unsigned long div = 1;
-
-- BUG_ON(clk->index > 7);
--
-- if (!clk->parent)
-- return 0;
--
- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
- if (control & SM_BIT(DIVEN))
- div = 2 * (SM_BFEXT(DIV, control) + 1);
-@@ -342,11 +336,6 @@
- u32 control;
- unsigned long parent_rate, actual_rate, div;
-
-- BUG_ON(clk->index > 7);
--
-- if (!clk->parent)
-- return 0;
--
- parent_rate = clk->parent->get_rate(clk->parent);
- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-
-@@ -373,11 +362,8 @@
- {
- u32 control;
-
-- BUG_ON(clk->index > 7);
--
- printk("clk %s: new parent %s (was %s)\n",
-- clk->name, parent->name,
-- clk->parent ? clk->parent->name : "(null)");
-+ clk->name, parent->name, clk->parent->name);
-
- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-
-@@ -399,6 +385,22 @@
- return 0;
- }
-
-+static void __init genclk_init_parent(struct clk *clk)
-+{
-+ u32 control;
-+ struct clk *parent;
-+
-+ BUG_ON(clk->index > 7);
-+
-+ control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
-+ if (control & SM_BIT(OSCSEL))
-+ parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
-+ else
-+ parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
-+
-+ clk->parent = parent;
-+}
-+
- /* --------------------------------------------------------------------
- * System peripherals
- * -------------------------------------------------------------------- */
-@@ -464,6 +466,17 @@
- .users = 1,
- };
-
-+static struct resource dmaca0_resource[] = {
-+ {
-+ .start = 0xff200000,
-+ .end = 0xff20ffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
-+
- /* --------------------------------------------------------------------
- * PIO
- * -------------------------------------------------------------------- */
-@@ -496,19 +509,28 @@
- DEFINE_DEV(pio, 3);
- DEV_CLK(mck, pio3, pba, 13);
-
-+static struct resource pio4_resource[] = {
-+ PBMEM(0xffe03800),
-+ IRQ(17),
-+};
-+DEFINE_DEV(pio, 4);
-+DEV_CLK(mck, pio4, pba, 14);
-+
- void __init at32_add_system_devices(void)
- {
-- system_manager.eim_first_irq = NR_INTERNAL_IRQS;
-+ system_manager.eim_first_irq = EIM_IRQ_BASE;
-
- platform_device_register(&at32_sm_device);
- platform_device_register(&at32_intc0_device);
- platform_device_register(&smc0_device);
- platform_device_register(&pdc_device);
-+ platform_device_register(&dmaca0_device);
-
- platform_device_register(&pio0_device);
- platform_device_register(&pio1_device);
- platform_device_register(&pio2_device);
- platform_device_register(&pio3_device);
-+ platform_device_register(&pio4_device);
- }
-
- /* --------------------------------------------------------------------
-@@ -521,7 +543,7 @@
- };
- static struct resource atmel_usart0_resource[] = {
- PBMEM(0xffe00c00),
-- IRQ(7),
-+ IRQ(6),
- };
- DEFINE_DEV_DATA(atmel_usart, 0);
- DEV_CLK(usart, atmel_usart0, pba, 4);
-@@ -583,7 +605,7 @@
- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
- }
-
--static struct platform_device *at32_usarts[4];
-+static struct platform_device *__initdata at32_usarts[4];
-
- void __init at32_map_usart(unsigned int hw_id, unsigned int line)
- {
-@@ -728,32 +750,156 @@
- /* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
--static struct resource spi0_resource[] = {
-+static struct resource atmel_spi0_resource[] = {
- PBMEM(0xffe00000),
- IRQ(3),
- };
--DEFINE_DEV(spi, 0);
--DEV_CLK(mck, spi0, pba, 0);
-+DEFINE_DEV(atmel_spi, 0);
-+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
-+
-+static struct resource atmel_spi1_resource[] = {
-+ PBMEM(0xffe00400),
-+ IRQ(4),
-+};
-+DEFINE_DEV(atmel_spi, 1);
-+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
-+
-+static void __init
-+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-+ unsigned int n, const u8 *pins)
-+{
-+ unsigned int pin, mode;
-+
-+ for (; n; n--, b++) {
-+ b->bus_num = bus_num;
-+ if (b->chip_select >= 4)
-+ continue;
-+ pin = (unsigned)b->controller_data;
-+ if (!pin) {
-+ pin = pins[b->chip_select];
-+ b->controller_data = (void *)pin;
-+ }
-+ mode = AT32_GPIOF_OUTPUT;
-+ if (!(b->mode & SPI_CS_HIGH))
-+ mode |= AT32_GPIOF_HIGH;
-+ at32_select_gpio(pin, mode);
-+ }
-+}
-
--struct platform_device *__init at32_add_device_spi(unsigned int id)
-+struct platform_device *__init
-+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- {
-+ /*
-+ * Manage the chipselects as GPIOs, normally using the same pins
-+ * the SPI controller expects; but boards can use other pins.
-+ */
-+ static u8 __initdata spi0_pins[] =
-+ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
-+ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
-+ static u8 __initdata spi1_pins[] =
-+ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
-+ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
- struct platform_device *pdev;
-
- switch (id) {
- case 0:
-- pdev = &spi0_device;
-+ pdev = &atmel_spi0_device;
- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
-- select_peripheral(PA(3), PERIPH_A, 0); /* NPCS0 */
-- select_peripheral(PA(4), PERIPH_A, 0); /* NPCS1 */
-- select_peripheral(PA(5), PERIPH_A, 0); /* NPCS2 */
-+ at32_spi_setup_slaves(0, b, n, spi0_pins);
-+ break;
-+
-+ case 1:
-+ pdev = &atmel_spi1_device;
-+ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
-+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
-+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
-+ at32_spi_setup_slaves(1, b, n, spi1_pins);
- break;
-
- default:
- return NULL;
- }
-
-+ spi_register_board_info(b, n);
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * TWI
-+ * -------------------------------------------------------------------- */
-+
-+static struct resource atmel_twi0_resource[] = {
-+ PBMEM(0xffe00800),
-+ IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
-+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_twi0_device;
-+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-+ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */
-+ break;
-+
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+ PBMEM(0xfff02400),
-+ IRQ(28),
-+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
-+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_mci0_device;
-+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ if (data) {
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, 0);
-+ if (data->wp_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->wp_pin, 0);
-+ memcpy(pdev->dev.platform_data, data,
-+ sizeof(struct mci_platform_data));
-+ }
-+
- platform_device_register(pdev);
- return pdev;
- }
-@@ -837,6 +983,199 @@
- return pdev;
- }
-
-+/* --------------------------------------------------------------------
-+ * USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff3fffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ PBMEM(0xfff03000),
-+ IRQ(31),
-+};
-+DEFINE_DEV(usba, 0);
-+DEV_CLK(pclk, usba0, pbb, 12);
-+DEV_CLK(hclk, usba0, hsb, 6);
-+
-+struct platform_device *__init at32_add_device_usba(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &usba0_device;
-+ /* USB pads are not multiplexed */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+ PBMEM(0xfff02800),
-+ IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
-+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_ac97c0_device;
-+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+ PBMEM(0xfff02000),
-+ IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+ .name = "sample_clk",
-+ .dev = &abdac0_device.dev,
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &abdac0_device;
-+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
-+ break;
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * ISI
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_isi0_resource[] = {
-+ PBMEM(0xfff02c00),
-+ IRQ(30),
-+};
-+DEFINE_DEV(atmel_isi, 0);
-+DEV_CLK(hclk, atmel_isi0, hsb, 5);
-+DEV_CLK(pclk, atmel_isi0, pbb, 11);
-+
-+struct platform_device *__init
-+at32_add_device_isi(unsigned int id)
-+{
-+ struct platform_device *pdev;
-+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_isi0_device;
-+ select_peripheral(PB(0), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PB(1), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PB(2), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PB(3), PERIPH_A, 0); /* DATA3 */
-+ select_peripheral(PB(4), PERIPH_A, 0); /* DATA4 */
-+ select_peripheral(PB(5), PERIPH_A, 0); /* DATA5 */
-+ select_peripheral(PB(6), PERIPH_A, 0); /* DATA6 */
-+ select_peripheral(PB(7), PERIPH_A, 0); /* DATA7 */
-+ select_peripheral(PB(11), PERIPH_B, 0); /* DATA8 */
-+ select_peripheral(PB(12), PERIPH_B, 0); /* DATA9 */
-+ select_peripheral(PB(13), PERIPH_B, 0); /* DATA10 */
-+ select_peripheral(PB(14), PERIPH_B, 0); /* DATA11 */
-+ select_peripheral(PB(8), PERIPH_A, 0); /* HSYNC */
-+ select_peripheral(PB(9), PERIPH_A, 0); /* VSYNC */
-+ select_peripheral(PB(10), PERIPH_A, 0); /* PCLK */
-+ break;
-+
-+ default:
-+ return NULL;
-+ }
-+
-+ platform_device_register(pdev);
-+
-+ return pdev;
-+}
-+
-+/* --------------------------------------------------------------------
-+ * GCLK
-+ * -------------------------------------------------------------------- */
-+static struct clk gclk0 = {
-+ .name = "gclk0",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 0,
-+};
-+static struct clk gclk1 = {
-+ .name = "gclk1",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 1,
-+};
-+static struct clk gclk2 = {
-+ .name = "gclk2",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 2,
-+};
-+static struct clk gclk3 = {
-+ .name = "gclk3",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 3,
-+};
-+static struct clk gclk4 = {
-+ .name = "gclk4",
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 4,
-+};
-+
- struct clk *at32_clock_list[] = {
- &osc32k,
- &osc0,
-@@ -855,11 +1194,13 @@
- &smc0_mck,
- &pdc_hclk,
- &pdc_pclk,
-+ &dmaca0_hclk,
- &pico_clk,
- &pio0_mck,
- &pio1_mck,
- &pio2_mck,
- &pio3_mck,
-+ &pio4_mck,
- &atmel_usart0_usart,
- &atmel_usart1_usart,
- &atmel_usart2_usart,
-@@ -868,9 +1209,24 @@
- &macb0_pclk,
- &macb1_hclk,
- &macb1_pclk,
-- &spi0_mck,
-+ &atmel_spi0_spi_clk,
-+ &atmel_spi1_spi_clk,
-+ &atmel_twi0_pclk,
-+ &atmel_mci0_mci_clk,
- &lcdc0_hclk,
- &lcdc0_pixclk,
-+ &usba0_pclk,
-+ &usba0_hclk,
-+ &atmel_ac97c0_pclk,
-+ &abdac0_pclk,
-+ &abdac0_sample_clk,
-+ &gclk0,
-+ &gclk1,
-+ &gclk2,
-+ &gclk3,
-+ &gclk4,
-+ &atmel_isi0_hclk,
-+ &atmel_isi0_pclk,
- };
- unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-
-@@ -880,6 +1236,7 @@
- at32_init_pio(&pio1_device);
- at32_init_pio(&pio2_device);
- at32_init_pio(&pio3_device);
-+ at32_init_pio(&pio4_device);
- }
-
- void __init at32_clock_init(void)
-@@ -898,6 +1255,14 @@
- if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
- pll1.parent = &osc1;
-
-+ genclk_init_parent(&gclk0);
-+ genclk_init_parent(&gclk1);
-+ genclk_init_parent(&gclk2);
-+ genclk_init_parent(&gclk3);
-+ genclk_init_parent(&gclk4);
-+ genclk_init_parent(&lcdc0_pixclk);
-+ genclk_init_parent(&abdac0_sample_clk);
-+
- /*
- * Turn on all clocks that have at least one user already, and
- * turn off everything else. We only do this for module
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/clock.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/clock.c
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/clock.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/clock.c 2007-03-24 16:42:28.000000000 +0100
-@@ -63,7 +63,11 @@
-
- static void __clk_disable(struct clk *clk)
- {
-- BUG_ON(clk->users == 0);
-+ if (clk->users == 0) {
-+ printk(KERN_ERR "%s: mismatched disable\n", clk->name);
-+ WARN_ON(1);
-+ return;
-+ }
-
- if (--clk->users == 0 && clk->mode)
- clk->mode(clk, 0);
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/extint.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/extint.c
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/extint.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/extint.c 2007-03-24 16:42:28.000000000 +0100
-@@ -55,20 +55,11 @@
- unsigned long flags;
- int ret = 0;
-
-+ flow_type &= IRQ_TYPE_SENSE_MASK;
- if (flow_type == IRQ_TYPE_NONE)
- flow_type = IRQ_TYPE_LEVEL_LOW;
-
- desc = &irq_desc[irq];
-- desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
-- desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
--
-- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
-- desc->status |= IRQ_LEVEL;
-- set_irq_handler(irq, handle_level_irq);
-- } else {
-- set_irq_handler(irq, handle_edge_irq);
-- }
--
- spin_lock_irqsave(&sm->lock, flags);
-
- mode = sm_readl(sm, EIM_MODE);
-@@ -97,9 +88,16 @@
- break;
- }
-
-- sm_writel(sm, EIM_MODE, mode);
-- sm_writel(sm, EIM_EDGE, edge);
-- sm_writel(sm, EIM_LEVEL, level);
-+ if (ret == 0) {
-+ sm_writel(sm, EIM_MODE, mode);
-+ sm_writel(sm, EIM_EDGE, edge);
-+ sm_writel(sm, EIM_LEVEL, level);
-+
-+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+ flow_type |= IRQ_LEVEL;
-+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
-+ desc->status |= flow_type;
-+ }
-
- spin_unlock_irqrestore(&sm->lock, flags);
-
-@@ -122,8 +120,6 @@
- unsigned long status, pending;
- unsigned int i, ext_irq;
-
-- spin_lock(&sm->lock);
--
- status = sm_readl(sm, EIM_ISR);
- pending = status & sm_readl(sm, EIM_IMR);
-
-@@ -133,10 +129,11 @@
-
- ext_irq = i + sm->eim_first_irq;
- ext_desc = irq_desc + ext_irq;
-- ext_desc->handle_irq(ext_irq, ext_desc);
-+ if (ext_desc->status & IRQ_LEVEL)
-+ handle_level_irq(ext_irq, ext_desc);
-+ else
-+ handle_edge_irq(ext_irq, ext_desc);
- }
--
-- spin_unlock(&sm->lock);
- }
-
- static int __init eim_init(void)
-@@ -168,8 +165,9 @@
- sm->eim_chip = &eim_chip;
-
- for (i = 0; i < nr_irqs; i++) {
-+ /* NOTE the handler we set here is ignored by the demux */
- set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
-- handle_edge_irq);
-+ handle_level_irq);
- set_irq_chip_data(sm->eim_first_irq + i, sm);
- }
-
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/hsmc.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/hsmc.c
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/hsmc.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/hsmc.c 2007-03-24 16:42:29.000000000 +0100
-@@ -75,12 +75,35 @@
- return -EINVAL;
- }
-
-+ switch (config->nwait_mode) {
-+ case 0:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
-+ break;
-+ case 1:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
-+ break;
-+ case 2:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
-+ break;
-+ case 3:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (config->tdf_cycles) {
-+ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
-+ }
-+
- if (config->nrd_controlled)
- mode |= HSMC_BIT(READ_MODE);
- if (config->nwe_controlled)
- mode |= HSMC_BIT(WRITE_MODE);
- if (config->byte_write)
- mode |= HSMC_BIT(BAT);
-+ if (config->tdf_mode)
-+ mode |= HSMC_BIT(TDF_MODE);
-
- pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
- cs, setup, pulse, cycle, mode);
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Kconfig linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Kconfig
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,15 @@
-+if PLATFORM_AT32AP
-+
-+menu "Atmel AVR32 AP options"
-+
-+config PIO_DEV
-+ bool "PIO /dev interface"
-+ select CONFIGFS_FS
-+ default y
-+ help
-+ Say `Y' to enable a /dev interface to the Parallel I/O
-+ Controller.
-+
-+endmenu
-+
-+endif
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Makefile linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Makefile
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/Makefile 2007-03-24 16:42:28.000000000 +0100
-@@ -1,2 +1,2 @@
--obj-y += at32ap.o clock.o pio.o intc.o extint.o hsmc.o
-+obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/pio.c linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/pio.c
---- linux-2.6.20.4-0rig/arch/avr32/mach-at32ap/pio.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mach-at32ap/pio.c 2007-03-24 16:42:29.000000000 +0100
-@@ -12,7 +12,9 @@
- #include <linux/debugfs.h>
- #include <linux/fs.h>
- #include <linux/platform_device.h>
-+#include <linux/irq.h>
-
-+#include <asm/gpio.h>
- #include <asm/io.h>
-
- #include <asm/arch/portmux.h>
-@@ -23,10 +25,11 @@
-
- struct pio_device {
- void __iomem *regs;
-- const struct platform_device *pdev;
-+ struct platform_device *pdev;
- struct clk *clk;
- u32 pinmux_mask;
-- char name[32];
-+ u32 gpio_mask;
-+ char name[8];
- };
-
- static struct pio_device pio_dev[MAX_NR_PIO_DEVICES];
-@@ -76,6 +79,9 @@
- if (!(flags & AT32_GPIOF_PULLUP))
- pio_writel(pio, PUDR, mask);
-
-+ /* gpio_request NOT allowed */
-+ set_bit(pin_index, &pio->gpio_mask);
-+
- return;
-
- fail:
-@@ -99,19 +105,52 @@
- goto fail;
- }
-
-- pio_writel(pio, PUER, mask);
-- if (flags & AT32_GPIOF_HIGH)
-- pio_writel(pio, SODR, mask);
-- else
-- pio_writel(pio, CODR, mask);
-- if (flags & AT32_GPIOF_OUTPUT)
-+ if (flags & AT32_GPIOF_OUTPUT) {
-+ if (flags & AT32_GPIOF_HIGH)
-+ pio_writel(pio, SODR, mask);
-+ else
-+ pio_writel(pio, CODR, mask);
-+ pio_writel(pio, PUDR, mask);
- pio_writel(pio, OER, mask);
-- else
-+ } else {
-+ if (flags & AT32_GPIOF_PULLUP)
-+ pio_writel(pio, PUER, mask);
-+ else
-+ pio_writel(pio, PUDR, mask);
-+ if (flags & AT32_GPIOF_DEGLITCH)
-+ pio_writel(pio, IFER, mask);
-+ else
-+ pio_writel(pio, IFDR, mask);
- pio_writel(pio, ODR, mask);
-+ }
-
- pio_writel(pio, PER, mask);
-- if (!(flags & AT32_GPIOF_PULLUP))
-- pio_writel(pio, PUDR, mask);
-+
-+ /* gpio_request now allowed */
-+ clear_bit(pin_index, &pio->gpio_mask);
-+
-+ return;
-+
-+fail:
-+ dump_stack();
-+}
-+
-+/* Reserve a pin, preventing anyone else from changing its configuration. */
-+void __init at32_reserve_pin(unsigned int pin)
-+{
-+ struct pio_device *pio;
-+ unsigned int pin_index = pin & 0x1f;
-+
-+ pio = gpio_to_pio(pin);
-+ if (unlikely(!pio)) {
-+ printk("pio: invalid pin %u\n", pin);
-+ goto fail;
-+ }
-+
-+ if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) {
-+ printk("%s: pin %u is busy\n", pio->name, pin_index);
-+ goto fail;
-+ }
-
- return;
-
-@@ -119,20 +158,793 @@
- dump_stack();
- }
-
-+/*--------------------------------------------------------------------------*/
-+
-+static unsigned int pio_id(struct pio_device *pio)
-+{
-+ return pio - pio_dev;
-+}
-+
-+static void __disable_gpio(struct pio_device *pio, u32 mask)
-+{
-+ pio_writel(pio, PUER, mask);
-+ pio_writel(pio, ODR, mask);
-+}
-+
-+static void pio_dealloc_mask(struct pio_device *pio, u32 mask)
-+{
-+ u32 old, new;
-+
-+ do {
-+ old = pio->pinmux_mask;
-+ new = old & ~mask;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+}
-+
-+/* GPIO API */
-+
-+int gpio_request(unsigned int gpio, const char *label)
-+{
-+ struct pio_device *pio;
-+ unsigned int pin;
-+
-+ pio = gpio_to_pio(gpio);
-+ if (!pio)
-+ return -ENODEV;
-+
-+ pin = gpio & 0x1f;
-+ if (test_and_set_bit(pin, &pio->gpio_mask))
-+ return -EBUSY;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(gpio_request);
-+
-+void gpio_free(unsigned int gpio)
-+{
-+ struct pio_device *pio;
-+ unsigned int pin;
-+
-+ pio = gpio_to_pio(gpio);
-+ if (!pio) {
-+ printk(KERN_ERR
-+ "gpio: attempted to free invalid pin %u\n", gpio);
-+ return;
-+ }
-+
-+ pin = gpio & 0x1f;
-+ if (!test_and_clear_bit(pin, &pio->gpio_mask))
-+ printk(KERN_ERR "gpio: freeing free or non-gpio pin %s-%u\n",
-+ pio->name, pin);
-+}
-+EXPORT_SYMBOL(gpio_free);
-+
-+int gpio_direction_input(unsigned int gpio)
-+{
-+ struct pio_device *pio;
-+ unsigned int pin;
-+
-+ pio = gpio_to_pio(gpio);
-+ if (!pio)
-+ return -ENODEV;
-+
-+ pin = gpio & 0x1f;
-+ pio_writel(pio, ODR, 1 << pin);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(gpio_direction_input);
-+
-+int gpio_direction_output(unsigned int gpio)
-+{
-+ struct pio_device *pio;
-+ unsigned int pin;
-+
-+ pio = gpio_to_pio(gpio);
-+ if (!pio)
-+ return -ENODEV;
-+
-+ pin = gpio & 0x1f;
-+ pio_writel(pio, OER, 1 << pin);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(gpio_direction_output);
-+
-+int gpio_get_value(unsigned int gpio)
-+{
-+ struct pio_device *pio = &pio_dev[gpio >> 5];
-+
-+ return (pio_readl(pio, PDSR) >> (gpio & 0x1f)) & 1;
-+}
-+EXPORT_SYMBOL(gpio_get_value);
-+
-+void gpio_set_value(unsigned int gpio, int value)
-+{
-+ struct pio_device *pio = &pio_dev[gpio >> 5];
-+ u32 mask;
-+
-+ mask = 1 << (gpio & 0x1f);
-+ if (value)
-+ pio_writel(pio, SODR, mask);
-+ else
-+ pio_writel(pio, CODR, mask);
-+}
-+EXPORT_SYMBOL(gpio_set_value);
-+
-+/*--------------------------------------------------------------------------*/
-+
-+/* GPIO IRQ support */
-+
-+static void gpio_irq_mask(unsigned irq)
-+{
-+ unsigned gpio = irq_to_gpio(irq);
-+ struct pio_device *pio = &pio_dev[gpio >> 5];
-+
-+ pio_writel(pio, IDR, 1 << (gpio & 0x1f));
-+}
-+
-+static void gpio_irq_unmask(unsigned irq)
-+{
-+ unsigned gpio = irq_to_gpio(irq);
-+ struct pio_device *pio = &pio_dev[gpio >> 5];
-+
-+ pio_writel(pio, IER, 1 << (gpio & 0x1f));
-+}
-+
-+static int gpio_irq_type(unsigned irq, unsigned type)
-+{
-+ if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static struct irq_chip gpio_irqchip = {
-+ .name = "gpio",
-+ .mask = gpio_irq_mask,
-+ .unmask = gpio_irq_unmask,
-+ .set_type = gpio_irq_type,
-+};
-+
-+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-+{
-+ struct pio_device *pio = get_irq_chip_data(irq);
-+ unsigned gpio_irq;
-+
-+ gpio_irq = (unsigned) get_irq_data(irq);
-+ for (;;) {
-+ u32 isr;
-+ struct irq_desc *d;
-+
-+ /* ack pending GPIO interrupts */
-+ isr = pio_readl(pio, ISR) & pio_readl(pio, IMR);
-+ if (!isr)
-+ break;
-+ do {
-+ int i;
-+
-+ i = ffs(isr) - 1;
-+ isr &= ~(1 << i);
-+
-+ i += gpio_irq;
-+ d = &irq_desc[i];
-+
-+ d->handle_irq(i, d);
-+ } while (isr);
-+ }
-+}
-+
-+static void __init
-+gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq)
-+{
-+ unsigned i;
-+
-+ set_irq_chip_data(irq, pio);
-+ set_irq_data(irq, (void *) gpio_irq);
-+
-+ for (i = 0; i < 32; i++, gpio_irq++) {
-+ set_irq_chip_data(gpio_irq, pio);
-+ set_irq_chip_and_handler(gpio_irq, &gpio_irqchip,
-+ handle_simple_irq);
-+ }
-+
-+ set_irq_chained_handler(irq, gpio_irq_handler);
-+}
-+
-+/*--------------------------------------------------------------------------*/
-+
-+#ifdef CONFIG_PIO_DEV
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
-+
-+#define GPIO_DEV_MAX 8
-+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
-+
-+struct gpio_item {
-+ spinlock_t lock;
-+
-+ struct pio_device *pio;
-+
-+ int enabled;
-+ int pio_id;
-+ u32 pin_mask;
-+ u32 oe_mask;
-+
-+ /* Pin state last time we read it (for blocking reads) */
-+ u32 pin_state;
-+ int changed;
-+
-+ wait_queue_head_t change_wq;
-+ struct fasync_struct *async_queue;
-+
-+ int id;
-+ struct class_device *gpio_dev;
-+ struct cdev char_dev;
-+ struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+ struct configfs_attribute attr;
-+ ssize_t (*show)(struct gpio_item *, char *);
-+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+ struct gpio_item *gpio = dev_id;
-+ u32 old_state, new_state;
-+
-+ old_state = gpio->pin_state;
-+ new_state = pio_readl(gpio->pio, PDSR);
-+ gpio->pin_state = new_state;
-+
-+ if (new_state != old_state) {
-+ gpio->changed = 1;
-+ wake_up_interruptible(&gpio->change_wq);
-+
-+ if (gpio->async_queue)
-+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = container_of(inode->i_cdev,
-+ struct gpio_item,
-+ char_dev);
-+ unsigned int irq;
-+ unsigned int i;
-+ int ret;
-+
-+ nonseekable_open(inode, file);
-+ config_item_get(&gpio->item);
-+ file->private_data = gpio;
-+
-+ gpio->pin_state = pio_readl(gpio->pio, PDSR) & gpio->pin_mask;
-+ gpio->changed = 1;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
-+ ret = request_irq(irq, gpio_dev_interrupt, 0,
-+ "gpio-dev", gpio);
-+ if (ret)
-+ goto err_irq;
-+ }
-+ }
-+
-+ return 0;
-+
-+err_irq:
-+ while (i--) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+
-+ return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
-+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int irq;
-+ unsigned int i;
-+
-+ gpio_dev_fasync(-1, file, 0);
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * pio_id(gpio->pio) + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return 0;
-+}
-+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int mask = 0;
-+
-+ poll_wait(file, &gpio->change_wq, wait);
-+ if (gpio->changed)
-+ mask |= POLLIN | POLLRDNORM;
-+
-+ return mask;
-+}
-+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value;
-+
-+ spin_lock_irq(&gpio->lock);
-+ while (!gpio->changed) {
-+ spin_unlock_irq(&gpio->lock);
-+
-+ if (file->f_flags & O_NONBLOCK)
-+ return -EAGAIN;
-+
-+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+ return -ERESTARTSYS;
-+
-+ spin_lock_irq(&gpio->lock);
-+ }
-+
-+ gpio->changed = 0;
-+ value = pio_readl(gpio->pio, PDSR) & gpio->pin_mask;
-+
-+ spin_unlock_irq(&gpio->lock);
-+
-+ count = min(count, (size_t)4);
-+ if (copy_to_user(buf, &value, count))
-+ return -EFAULT;
-+
-+ return count;
-+}
-+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value = 0;
-+ u32 mask = ~0UL;
-+
-+ count = min(count, (size_t)4);
-+ if (copy_from_user(&value, buf, count))
-+ return -EFAULT;
-+
-+ /* Assuming big endian */
-+ mask <<= (4 - count) * 8;
-+ mask &= gpio->pin_mask;
-+
-+ pio_writel(gpio->pio, CODR, ~value & mask);
-+ pio_writel(gpio->pio, SODR, value & mask);
-+
-+ return count;
-+}
-+
-+static struct file_operations gpio_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .open = gpio_dev_open,
-+ .release = gpio_dev_release,
-+ .fasync = gpio_dev_fasync,
-+ .poll = gpio_dev_poll,
-+ .read = gpio_dev_read,
-+ .write = gpio_dev_write,
-+};
-+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+ return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
-+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->pio_id);
-+}
-+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ unsigned long id;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ id = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* Switching PIO is not allowed when live... */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ ret = -ENXIO;
-+ if ((id < MAX_NR_PIO_DEVICES) && pio_dev[id].regs) {
-+ gpio->pio_id = id;
-+ ret = count;
-+ }
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
-+}
-+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ u32 new_mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ new_mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* Can't update the pin mask while live. */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask &= new_mask;
-+ gpio->pin_mask = new_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
-+}
-+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ u32 mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
-+
-+ mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask = mask & gpio->pin_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
-+}
-+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->enabled);
-+}
-+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
-+ char *p = (char *)page;
-+ int enabled;
-+ int ret;
-+
-+ enabled = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
-+
-+ /* make it a boolean value */
-+ enabled = !!enabled;
-+
-+ if (gpio->enabled == enabled)
-+ /* Already enabled; do nothing. */
-+ return count;
-+
-+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+ if (!enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ __disable_gpio(gpio->pio, gpio->pin_mask);
-+ pio_dealloc_mask(gpio->pio, gpio->pin_mask);
-+ gpio->pio = NULL;
-+ } else {
-+ if (gpio->pio_id < 0 || !gpio->pin_mask)
-+ return -ENODEV;
-+ }
-+
-+ /* Disallow any updates to gpio_id or pin_mask */
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = enabled;
-+ spin_unlock(&gpio->lock);
-+
-+ if (!enabled)
-+ return count;
-+
-+ /* Now, try to allocate the pins */
-+ ret = -EBUSY;
-+ pio = gpio->pio = &pio_dev[gpio->pio_id];
-+ do {
-+ old = pio->pinmux_mask;
-+ if (old & gpio->pin_mask)
-+ goto err_alloc_pins;
-+
-+ new = old | gpio->pin_mask;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
-+
-+ pio_writel(pio, OER, gpio->oe_mask);
-+ pio_writel(pio, PER, gpio->pin_mask);
-+
-+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+ gpio->char_dev.owner = THIS_MODULE;
-+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+ if (ret < 0)
-+ goto err_cdev_add;
-+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+ MKDEV(MAJOR(gpio_devt), gpio->id),
-+ &gpio->pio->pdev->dev,
-+ "gpio%d", gpio->id);
-+ if (IS_ERR(gpio->gpio_dev)) {
-+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+ ret = PTR_ERR(gpio->gpio_dev);
-+ goto err_class_dev;
-+ }
-+
-+ printk(KERN_INFO "created gpio%d (pio%d/0x%08x) as (%d:%d)\n",
-+ gpio->id, pio_id(gpio->pio), gpio->pin_mask,
-+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
-+
-+ return 0;
-+
-+err_class_dev:
-+ cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+ __disable_gpio(pio, gpio->pin_mask);
-+ pio_dealloc_mask(pio, gpio->pin_mask);
-+err_alloc_pins:
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = 0;
-+ spin_unlock(&gpio->lock);
-+ gpio->pio = NULL;
-+
-+ return ret;
-+}
-+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "gpio_id",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_gpio_id,
-+ .store = gpio_store_gpio_id,
-+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "pin_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_pin_mask,
-+ .store = gpio_store_pin_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "oe_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_oe_mask,
-+ .store = gpio_store_oe_mask,
-+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "enabled",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_enabled,
-+ .store = gpio_store_enabled,
-+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+ &gpio_item_attr_gpio_id.attr,
-+ &gpio_item_attr_pin_mask.attr,
-+ &gpio_item_attr_oe_mask.attr,
-+ &gpio_item_attr_enabled.attr,
-+ NULL,
-+};
-+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ char *page)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = 0;
-+
-+ if (gpio_attr->show)
-+ ret = gpio_attr->show(gpio_item, page);
-+ return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ const char *page, size_t count)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = -EINVAL;
-+
-+ if (gpio_attr->store)
-+ ret = gpio_attr->store(gpio_item, page, count);
-+ return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+ kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+ .release = gpio_release,
-+ .show_attribute = gpio_show_attr,
-+ .store_attribute = gpio_store_attr,
-+};
-+
-+static struct config_item_type gpio_item_type = {
-+ .ct_item_ops = &gpio_item_ops,
-+ .ct_attrs = gpio_item_attrs,
-+ .ct_owner = THIS_MODULE,
-+};
-+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+ const char *name)
-+{
-+ static int next_id;
-+ struct gpio_item *gpio;
-+
-+ if (next_id >= GPIO_DEV_MAX)
-+ return NULL;
-+
-+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+ if (!gpio)
-+ return NULL;
-+
-+ gpio->id = next_id++;
-+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+ spin_lock_init(&gpio->lock);
-+ init_waitqueue_head(&gpio->change_wq);
-+
-+ return &gpio->item;
-+}
-+
-+static void gpio_drop_item(struct config_group *group,
-+ struct config_item *item)
-+{
-+ struct gpio_item *gpio = to_gpio_item(item);
-+ struct pio_device *pio;
-+
-+ spin_lock(&gpio->lock);
-+ if (gpio->enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ }
-+
-+ pio = gpio->pio;
-+ if (pio) {
-+ __disable_gpio(pio, gpio->pin_mask);
-+ pio_dealloc_mask(pio, gpio->pin_mask);
-+ gpio->pio = NULL;
-+ }
-+ spin_unlock(&gpio->lock);
-+}
-+
-+static struct configfs_group_operations gpio_group_ops = {
-+ .make_item = gpio_make_item,
-+ .drop_item = gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+ .ct_group_ops = &gpio_group_ops,
-+ .ct_owner = THIS_MODULE,
-+};
-+
-+static struct configfs_subsystem gpio_subsys = {
-+ .su_group = {
-+ .cg_item = {
-+ .ci_namebuf = "gpio",
-+ .ci_type = &gpio_group_type,
-+ },
-+ },
-+};
-+
-+static int __init pio_init_dev(void)
-+{
-+ int err;
-+
-+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+ if (IS_ERR(gpio_dev_class)) {
-+ err = PTR_ERR(gpio_dev_class);
-+ goto err_class_create;
-+ }
-+
-+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+ if (err < 0)
-+ goto err_alloc_chrdev;
-+
-+ /* Configfs initialization */
-+ config_group_init(&gpio_subsys.su_group);
-+ init_MUTEX(&gpio_subsys.su_sem);
-+ err = configfs_register_subsystem(&gpio_subsys);
-+ if (err)
-+ goto err_register_subsys;
-+
-+ return 0;
-+
-+err_register_subsys:
-+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+ class_destroy(gpio_dev_class);
-+err_class_create:
-+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+ return err;
-+}
-+late_initcall(pio_init_dev);
-+#endif /* CONFIG_PIO_DEV */
-+
- static int __init pio_probe(struct platform_device *pdev)
- {
- struct pio_device *pio = NULL;
-+ int irq = platform_get_irq(pdev, 0);
-+ int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32;
-
- BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES);
- pio = &pio_dev[pdev->id];
- BUG_ON(!pio->regs);
-
-- /* TODO: Interrupts */
-+ gpio_irq_setup(pio, irq, gpio_irq_base);
-
- platform_set_drvdata(pdev, pio);
-
-- printk(KERN_INFO "%s: Atmel Port Multiplexer at 0x%p (irq %d)\n",
-- pio->name, pio->regs, platform_get_irq(pdev, 0));
-+ printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n",
-+ pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31);
-
- return 0;
- }
-@@ -148,7 +960,7 @@
- {
- return platform_driver_register(&pio_driver);
- }
--subsys_initcall(pio_init);
-+postcore_initcall(pio_init);
-
- void __init at32_init_pio(struct platform_device *pdev)
- {
-@@ -184,6 +996,13 @@
- pio->pdev = pdev;
- pio->regs = ioremap(regs->start, regs->end - regs->start + 1);
-
-- pio_writel(pio, ODR, ~0UL);
-- pio_writel(pio, PER, ~0UL);
-+ /*
-+ * request_gpio() is only valid for pins that have been
-+ * explicitly configured as GPIO and not previously requested
-+ */
-+ pio->gpio_mask = ~0UL;
-+
-+ /* start with irqs disabled and acked */
-+ pio_writel(pio, IDR, ~0UL);
-+ (void) pio_readl(pio, ISR);
- }
-diff -urN linux-2.6.20.4-0rig/arch/avr32/Makefile linux-2.6.20.4-atmel/arch/avr32/Makefile
---- linux-2.6.20.4-0rig/arch/avr32/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -30,6 +30,8 @@
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
-+drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
-
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mm/cache.c linux-2.6.20.4-atmel/arch/avr32/mm/cache.c
---- linux-2.6.20.4-0rig/arch/avr32/mm/cache.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mm/cache.c 2007-03-24 16:42:28.000000000 +0100
-@@ -22,18 +22,34 @@
-
- void invalidate_dcache_region(void *start, size_t size)
- {
-- unsigned long v, begin, end, linesz;
-+ unsigned long v, begin, end, linesz, mask;
-+ int flush = 0;
-
- linesz = boot_cpu_data.dcache.linesz;
-+ mask = linesz - 1;
-
-- //printk("invalidate dcache: %p + %u\n", start, size);
--
-- /* You asked for it, you got it */
-- begin = (unsigned long)start & ~(linesz - 1);
-- end = ((unsigned long)start + size + linesz - 1) & ~(linesz - 1);
-+ /* when first and/or last cachelines are shared, flush them
-+ * instead of invalidating ... never discard valid data!
-+ */
-+ begin = (unsigned long)start;
-+ end = begin + size - 1;
-+
-+ if (begin & mask) {
-+ flush_dcache_line(start);
-+ begin += linesz;
-+ flush = 1;
-+ }
-+ if ((end & mask) != mask) {
-+ flush_dcache_line((void *)end);
-+ end -= linesz;
-+ flush = 1;
-+ }
-
-- for (v = begin; v < end; v += linesz)
-+ /* remaining cachelines only need invalidation */
-+ for (v = begin; v <= end; v += linesz)
- invalidate_dcache_line((void *)v);
-+ if (flush)
-+ flush_write_buffer();
- }
-
- void clean_dcache_region(void *start, size_t size)
-diff -urN linux-2.6.20.4-0rig/arch/avr32/mm/dma-coherent.c linux-2.6.20.4-atmel/arch/avr32/mm/dma-coherent.c
---- linux-2.6.20.4-0rig/arch/avr32/mm/dma-coherent.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/mm/dma-coherent.c 2007-03-24 16:42:29.000000000 +0100
-@@ -41,6 +41,13 @@
- struct page *page, *free, *end;
- int order;
-
-+ /* Following is a work-around (a.k.a. hack) to prevent pages
-+ * with __GFP_COMP being passed to split_page() which cannot
-+ * handle them. The real problem is that this flag probably
-+ * should be 0 on AVR32 as it is not supported on this
-+ * platform--see CONFIG_HUGETLB_PAGE. */
-+ gfp &= ~(__GFP_COMP);
-+
- size = PAGE_ALIGN(size);
- order = get_order(size);
-
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/common.c linux-2.6.20.4-atmel/arch/avr32/oprofile/common.c
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/common.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/common.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,169 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Author: Ronny Pedersen
-+ */
-+
-+#define DEBUG
-+#include <linux/init.h>
-+#include <linux/oprofile.h>
-+#include <linux/errno.h>
-+#include <asm/semaphore.h>
-+#include <linux/sysdev.h>
-+
-+#include "op_avr32_model.h"
-+#include "op_counter.h"
-+
-+static struct op_avr32_model_spec *pc_model;
-+static int pc_enabled = 0;
-+static struct semaphore pc_sem;
-+
-+
-+static int pc_start(void);
-+static int pc_setup(void);
-+static void pc_stop(void);
-+static int pc_create_files(struct super_block *, struct dentry *);
-+
-+
-+struct op_counter_config counter_config[OP_MAX_COUNTER];
-+
-+static int pc_suspend(struct sys_device *dev, u32 state)
-+{
-+ if (pc_enabled)
-+ pc_stop();
-+ return 0;
-+}
-+
-+static int pc_resume(struct sys_device *dev)
-+{
-+ if (pc_enabled)
-+ pc_start();
-+ return 0;
-+}
-+
-+static struct sysdev_class oprofile_sysclass = {
-+ set_kset_name("oprofile"),
-+ .resume = pc_resume,
-+ .suspend = pc_suspend,
-+};
-+
-+static struct sys_device device_oprofile = {
-+ .id = 0,
-+ .cls = &oprofile_sysclass,
-+};
-+
-+static int __init init_driverfs(void)
-+{
-+ int ret;
-+
-+ if (!(ret = sysdev_class_register(&oprofile_sysclass)))
-+ ret = sysdev_register(&device_oprofile);
-+
-+ return ret;
-+}
-+
-+static void exit_driverfs(void)
-+{
-+ sysdev_unregister(&device_oprofile);
-+ sysdev_class_unregister(&oprofile_sysclass);
-+}
-+
-+static int pc_create_files(struct super_block *sb, struct dentry *root)
-+{
-+ unsigned int i;
-+
-+ pr_debug("AVR32 Peformance Counters: create files\n");
-+ for (i = 0; i < pc_model->num_counters; i++) {
-+ struct dentry *dir;
-+ char buf[2];
-+
-+ snprintf(buf, sizeof buf, "%d", i);
-+ dir = oprofilefs_mkdir(sb, root, buf);
-+ oprofilefs_create_ulong(sb, dir, "enabled",
-+ &counter_config[i].enabled);
-+ oprofilefs_create_ulong(sb, dir, "event",
-+ &counter_config[i].event);
-+ oprofilefs_create_ulong(sb, dir, "count",
-+ &counter_config[i].count);
-+ oprofilefs_create_ulong(sb, dir, "unit_mask",
-+ &counter_config[i].unit_mask);
-+ oprofilefs_create_ulong(sb, dir, "kernel",
-+ &counter_config[i].kernel);
-+ oprofilefs_create_ulong(sb, dir, "user",
-+ &counter_config[i].user);
-+ }
-+
-+ return 0;
-+}
-+
-+static int pc_setup(void)
-+{
-+ int ret;
-+
-+ spin_lock(&oprofilefs_lock);
-+ pr_debug("AVR32 Peformance Counters: setup\n");
-+ ret = pc_model->setup_ctrs();
-+ spin_unlock(&oprofilefs_lock);
-+ return ret;
-+}
-+
-+static int pc_start(void)
-+{
-+ int ret = -EBUSY;
-+
-+ down(&pc_sem);
-+ if (!pc_enabled) {
-+ pr_debug("AVR32 Peformance Counters: start\n");
-+ ret = pc_model->start();
-+ pc_enabled = !ret;
-+ }
-+ up(&pc_sem);
-+ return ret;
-+}
-+
-+static void pc_stop(void)
-+{
-+ down(&pc_sem);
-+ pr_debug("AVR32 Peformance Counters: stop\n");
-+ if (pc_enabled)
-+ pc_model->stop();
-+ pc_enabled = 0;
-+ up(&pc_sem);
-+}
-+
-+int __init pc_init(struct oprofile_operations *ops,
-+ struct op_avr32_model_spec *spec)
-+{
-+ init_MUTEX(&pc_sem);
-+
-+ if ( spec->init )
-+ if (spec->init() < 0)
-+ return -ENODEV;
-+
-+ pc_model = spec;
-+ init_driverfs();
-+ ops->create_files = pc_create_files;
-+ ops->setup = pc_setup;
-+ ops->shutdown = pc_stop;
-+ ops->start = pc_start;
-+ ops->stop = pc_stop;
-+ ops->cpu_type = pc_model->name;
-+ printk(KERN_INFO "oprofile: using %s Performance Counters\n",
-+ spec->name);
-+ pr_debug("AVR32 Peformance Counters: pc_init\n");
-+
-+ return 0;
-+}
-+
-+void pc_exit(void)
-+{
-+ if (pc_model) {
-+ pr_debug("AVR32 Peformance Counters: exit\n");
-+ exit_driverfs();
-+ pc_model = NULL;
-+ }
-+}
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/init.c linux-2.6.20.4-atmel/arch/avr32/oprofile/init.c
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/init.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/init.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Author: Ronny Pedersen
-+ */
-+
-+#include <linux/oprofile.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include "op_avr32_model.h"
-+#include "op_model_avr32.h"
-+
-+int __init oprofile_arch_init(struct oprofile_operations *ops)
-+{
-+ int ret = -ENODEV;
-+
-+ ret = pc_init(ops, &op_avr32_spec);
-+
-+ return ret;
-+}
-+
-+void oprofile_arch_exit(void)
-+{
-+ pc_exit();
-+}
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/Kconfig linux-2.6.20.4-atmel/arch/avr32/oprofile/Kconfig
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,23 @@
-+
-+menu "Profiling support"
-+ depends on EXPERIMENTAL
-+
-+config PROFILING
-+ bool "Profiling support (EXPERIMENTAL)"
-+ help
-+ Say Y here to enable the extended profiling support mechanisms used
-+ by profilers such as OProfile.
-+
-+
-+config OPROFILE
-+ tristate "OProfile system profiling (EXPERIMENTAL)"
-+ depends on PROFILING
-+ help
-+ OProfile is a profiling system capable of profiling the
-+ whole system, including the kernel, kernel modules, libraries,
-+ and applications.
-+
-+ If unsure, say N.
-+
-+endmenu
-+
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/Makefile linux-2.6.20.4-atmel/arch/avr32/oprofile/Makefile
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,10 @@
-+obj-$(CONFIG_OPROFILE) += oprofile.o
-+
-+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-+ oprof.o cpu_buffer.o buffer_sync.o \
-+ event_buffer.o oprofile_files.o \
-+ oprofilefs.o oprofile_stats.o \
-+ timer_int.o )
-+
-+oprofile-y := $(DRIVER_OBJS) init.o common.o
-+oprofile-y += op_model_avr32.o
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_avr32_model.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_avr32_model.h
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_avr32_model.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_avr32_model.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,25 @@
-+/*
-+ * interface to AVR32 machine specific operations
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Author: Ronny Pedersen
-+ */
-+
-+#ifndef OP_AVR32_MODEL_H
-+#define OP_AVR32_MODEL_H
-+
-+struct op_avr32_model_spec {
-+ int (*init)(void);
-+ unsigned int num_counters;
-+ int (*setup_ctrs)(void);
-+ int (*start)(void);
-+ void (*stop)(void);
-+ char *name;
-+};
-+
-+#endif /* OP_AVR32_MODEL_H */
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_counter.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_counter.h
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_counter.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_counter.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Author: Ronny Pedersen
-+ */
-+#ifndef OP_COUNTER_H
-+#define OP_COUNTER_H
-+
-+#define OP_MAX_COUNTER 3
-+
-+/* Per performance monitor configuration as set via
-+ * oprofilefs.
-+ */
-+struct op_counter_config {
-+ unsigned long count;
-+ unsigned long enabled;
-+ unsigned long event;
-+ unsigned long unit_mask;
-+ unsigned long kernel;
-+ unsigned long user;
-+};
-+
-+extern struct op_counter_config counter_config[];
-+
-+#endif /* OP_COUNTER_H */
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.c linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.c
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,222 @@
-+/*
-+ * AVR32 Performance Counter Driver
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Authors: Sondre Garsjoe, Ronny Pedersen
-+ */
-+
-+#define DEBUG
-+
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/oprofile.h>
-+#include <linux/interrupt.h>
-+#include <asm/intc.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/sysreg.h>
-+
-+#include "op_counter.h"
-+#include "op_avr32_model.h"
-+
-+
-+#define PC_ENABLE 0x001 /* Enable counters */
-+#define PCNT_RESET 0x002 /* Reset event counters */
-+#define CCNT_RESET 0x004 /* Reset clock counter */
-+#define PC_RESET (CCNT_RESET | PCNT_RESET)
-+#define PC_CNT64 0x008 /* Make CCNT count every 64th cycle */
-+
-+
-+#define EVT_UNUSED 0xFF
-+
-+struct pc_counter {
-+ volatile unsigned long ovf;
-+ unsigned long reset_counter;
-+};
-+
-+enum { PCCNT, PCNT0, PCNT1, MAX_COUNTERS };
-+
-+#define PCCNT_IE (1 << 4)
-+#define PCNT0_IE (1 << 5)
-+#define PCNT1_IE (1 << 6)
-+
-+#define PCCNT_F (1 << 8)
-+#define PCNT0_F (1 << 9)
-+#define PCNT1_F (1 << 10)
-+
-+#define AVR32_PC_IRQ 0
-+
-+static const u32 int_mask[MAX_COUNTERS] = { PCCNT_IE, PCNT0_IE, PCNT1_IE };
-+static const u32 ovf_mask[MAX_COUNTERS] = { PCCNT_F, PCNT0_F, PCNT1_F };
-+
-+static struct pc_counter results[MAX_COUNTERS];
-+
-+static void write_pccr(u32 val)
-+{
-+ sysreg_write(PCCR, val);
-+}
-+
-+static u32 read_pccr(void)
-+{
-+ return sysreg_read(PCCR);
-+}
-+
-+static u32 read_counter(int counter)
-+{
-+ switch (counter) {
-+ case PCCNT:
-+ return sysreg_read(PCCNT);
-+ case PCNT0:
-+ return sysreg_read(PCNT0);
-+ case PCNT1:
-+ return sysreg_read(PCNT1);
-+ default:
-+ return 0;
-+ }
-+}
-+
-+static void write_counter(int counter, u32 val)
-+{
-+ switch (counter) {
-+ case PCCNT:
-+ sysreg_write(PCCNT, val);
-+ case PCNT0:
-+ sysreg_write(PCNT0, val);
-+ case PCNT1:
-+ sysreg_write(PCNT1, val);
-+ default:
-+ break;
-+ }
-+}
-+
-+static int avr32_setup_ctrs(void)
-+{
-+ u32 pccr;
-+ int i;
-+
-+ for (i = PCCNT; i < MAX_COUNTERS; i++) {
-+ if (counter_config[i].enabled)
-+ continue;
-+
-+ counter_config[i].event = EVT_UNUSED;
-+ }
-+
-+ pccr = ((counter_config[PCNT1].event << 18)
-+ | (counter_config[PCNT0].event << 12));
-+ pr_debug("avr32_setup_ctrs: pccr: %#08x\n", pccr);
-+ write_pccr(pccr);
-+
-+ for (i = PCCNT; i < MAX_COUNTERS; i++) {
-+ if (counter_config[i].event == EVT_UNUSED) {
-+ counter_config[i].event = 0;
-+ continue;
-+ }
-+
-+ results[i].reset_counter = counter_config[i].count;
-+ write_counter(i, -(u32)counter_config[i].count);
-+ pr_debug("avr32_setup_ctrs: counter%d %#08x from %#08lx\n",
-+ i, read_counter(i), counter_config[i].count);
-+ }
-+
-+ return 0;
-+}
-+
-+static void inline check_ctrs(void)
-+{
-+ int i;
-+ u32 pccr = read_pccr();
-+
-+ /* Writeback clears overflow flag */
-+ write_pccr(pccr & ~PC_ENABLE);
-+
-+ for (i = PCCNT; i < MAX_COUNTERS; i++) {
-+ if (!(int_mask[i] & pccr))
-+ continue;
-+
-+ if (pccr & ovf_mask[i])
-+ results[i].ovf++;
-+ }
-+}
-+
-+static irqreturn_t avr32_pc_interrupt(int irq, void *arg,
-+ struct pt_regs *regs)
-+{
-+ int i;
-+
-+ /* Check if this is a performance counter interrupt */
-+ if (!(intc_get_pending(irq) & 2))
-+ return IRQ_NONE;
-+
-+ check_ctrs();
-+
-+ for (i = PCCNT; i < MAX_COUNTERS; i++) {
-+ if (!results[i].ovf)
-+ continue;
-+
-+ write_counter(i, -(u32)results[i].reset_counter);
-+ oprofile_add_sample(regs, i);
-+ results[i].ovf--;
-+ }
-+
-+ /* Enable Performance Counter */
-+ write_pccr(read_pccr() | PC_ENABLE);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void avr32_pc_stop(void)
-+{
-+ write_pccr(read_pccr() & ~PC_ENABLE);
-+
-+ free_irq(AVR32_PC_IRQ, results);
-+}
-+
-+static int avr32_pc_start(void)
-+{
-+ int i, ret;
-+ u32 pccr = read_pccr();
-+
-+ ret = request_irq(AVR32_PC_IRQ, avr32_pc_interrupt, IRQF_SHARED | IRQF_DISABLED,
-+ "AVR32 Performance Counter", (void *)results);
-+
-+ if (ret < 0) {
-+ printk(KERN_ERR
-+ "oprofile: unable to request IRQ%d for AVR32"
-+ " Performance Counter\n",
-+ AVR32_PC_IRQ);
-+ return ret;
-+ }
-+
-+ /* Enable interrupts */
-+ for (i = PCCNT; i < MAX_COUNTERS; i++) {
-+ if (counter_config[i].enabled)
-+ pccr |= int_mask[i];
-+ }
-+
-+ /* Disable scaler */
-+ pccr &= ~PC_CNT64;
-+
-+ /* Enable Performance Counter */
-+ pccr |= PC_ENABLE;
-+
-+ write_pccr(pccr);
-+ pr_debug("avr32_pc_start: pc: %#08x\n", pccr);
-+ return 0;
-+}
-+
-+
-+struct op_avr32_model_spec op_avr32_spec = {
-+ .init = 0,
-+ .setup_ctrs = avr32_setup_ctrs,
-+ .start = avr32_pc_start,
-+ .stop = avr32_pc_stop,
-+ .num_counters = MAX_COUNTERS,
-+ .name = "avr32/at32ap7000",
-+};
-+
-diff -urN linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.h linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.h
---- linux-2.6.20.4-0rig/arch/avr32/oprofile/op_model_avr32.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/arch/avr32/oprofile/op_model_avr32.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,21 @@
-+/**
-+ * AVR32 Machine Specific Operations
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Author: Ronny Pedersen
-+ */
-+#ifndef OP_MODEL_AVR32_H
-+#define OP_MODEL_AVR32_H
-+
-+extern struct op_avr32_model_spec op_avr32_spec;
-+extern int pc_init(struct oprofile_operations *ops,
-+ struct op_avr32_model_spec *spec);
-+extern void pc_exit(void);
-+
-+
-+#endif
-diff -urN linux-2.6.20.4-0rig/drivers/char/at91_spi.c linux-2.6.20.4-atmel/drivers/char/at91_spi.c
---- linux-2.6.20.4-0rig/drivers/char/at91_spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/char/at91_spi.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,336 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock; /* protect access to SPI bus */
-+static int current_device = -1; /* currently selected SPI device */
-+static struct clk *spi_clk; /* SPI clock */
-+static void __iomem *spi_base; /* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+ /* Ensure that requested device is valid */
-+ if ((device < 0) || (device >= NR_SPI_DEVICES))
-+ panic("at91_spi: spi_access_bus called with invalid device");
-+
-+ if (spi_enabled == 0) {
-+ clk_enable(spi_clk); /* Enable Peripheral clock */
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+#ifdef DEBUG_SPI
-+ printk("SPI on\n");
-+#endif
-+ }
-+ spi_enabled++;
-+
-+ /* Lock the SPI bus */
-+ down(&spi_lock);
-+ current_device = device;
-+
-+ /* Configure SPI bus for device */
-+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+ if (device != current_device)
-+ panic("at91_spi: spi_release called with invalid device");
-+
-+ /* Release the SPI bus */
-+ current_device = -1;
-+ up(&spi_lock);
-+
-+ spi_enabled--;
-+ if (spi_enabled == 0) {
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_disable(spi_clk); /* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+ printk("SPI off\n");
-+#endif
-+ }
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ int tx_size;
-+
-+ if (!list)
-+ panic("at91_spi: spi_transfer called with NULL transfer list");
-+ if (current_device == -1)
-+ panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ /* Store transfer list */
-+ device->xfers = list;
-+ list->curr = 0;
-+
-+ /* Assume there must be at least one transfer */
-+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+ /* Program PDC registers */
-+ at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+ at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+ /* Is there a second transfer? */
-+ if (list->nr_transfers > 1) {
-+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+ /* Program Next PDC registers */
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+ }
-+ else {
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+
-+ // TODO: If we are doing consecutive transfers (at high speed, or
-+ // small buffers), then it might be worth modifying the 'Delay between
-+ // Consecutive Transfers' in the CSR registers.
-+ // This is an issue if we cannot chain the next buffer fast enough
-+ // in the interrupt handler.
-+
-+ /* Enable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
-+ wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer end\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+ unsigned int status;
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+ if (!list)
-+ panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
-+
-+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+ device->tx = device->txnext; /* move next transfer to current transfer */
-+ device->rx = device->rxnext;
-+
-+ list->curr = list->curr + 1;
-+ if (list->curr == list->nr_transfers) { /* all transfers complete */
-+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
-+
-+ /* Disable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ device->xfers = NULL;
-+ complete(&transfer_complete);
-+ }
-+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+ else {
-+ int i = (list->curr)+1;
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+ int i;
-+ unsigned long scbr;
-+ struct resource *res;
-+
-+ init_MUTEX(&spi_lock);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+ return -EBUSY;
-+
-+ spi_base = ioremap(res->start, res->end - res->start + 1);
-+ if (!spi_base) {
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENOMEM;
-+ }
-+
-+ spi_clk = clk_get(NULL, "spi_clk");
-+ if (IS_ERR(spi_clk)) {
-+ printk(KERN_ERR "at91_spi: no clock defined\n");
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENODEV;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
-+
-+ /*
-+ * Calculate the correct SPI baud-rate divisor.
-+ */
-+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+ scbr = scbr + 1; /* round up */
-+
-+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+ /* Set Chip Select registers to good defaults */
-+ for (i = 0; i < 4; i++) {
-+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+ }
-+
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ memset(&spi_dev, 0, sizeof(spi_dev));
-+ spi_dev[0].pcs = 0xE;
-+ spi_dev[1].pcs = 0xD;
-+ spi_dev[2].pcs = 0xB;
-+ spi_dev[3].pcs = 0x7;
-+
-+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+ clk_put(spi_clk);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -EBUSY;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+
-+ return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_put(spi_clk);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ free_irq(AT91RM9200_ID_SPI, 0);
-+ return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+ .probe = at91spi_probe,
-+ .remove = __devexit_p(at91spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+ return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+ platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN linux-2.6.20.4-0rig/drivers/char/at91_spidev.c linux-2.6.20.4-atmel/drivers/char/at91_spidev.c
---- linux-2.6.20.4-0rig/drivers/char/at91_spidev.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/char/at91_spidev.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,236 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ * Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+ unsigned int spi_device = (unsigned int) file->private_data;
-+
-+ struct mm_struct * mm;
-+ struct page ** maplist;
-+ struct spi_transfer_list* list;
-+ int pgcount;
-+
-+ unsigned int ofs, pagelen;
-+ int res, i, err;
-+
-+ if (!count) {
-+ return 0;
-+ }
-+
-+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!list) {
-+ return -ENOMEM;
-+ }
-+
-+ mm = current->mm;
-+
-+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+ if (pgcount >= MAX_SPI_TRANSFERS) {
-+ kfree(list);
-+ return -EFBIG;
-+ }
-+
-+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+ if (!maplist) {
-+ kfree(list);
-+ return -ENOMEM;
-+ }
-+ flush_cache_all();
-+ down_read(&mm->mmap_sem);
-+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+ up_read(&mm->mmap_sem);
-+
-+ if (err < 0) {
-+ kfree(list);
-+ kfree(maplist);
-+ return err;
-+ }
-+ pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+ /* Set default return value = transfer length */
-+ res = count;
-+
-+ /*
-+ * At this point, the virtual area buf[0] .. buf[count-1] will have
-+ * corresponding pages mapped in the physical memory and locked until
-+ * we unmap the kiobuf. The pages cannot be swapped out or moved
-+ * around.
-+ */
-+ ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+ pagelen = PAGE_SIZE - ofs;
-+ if (count < pagelen)
-+ pagelen = count;
-+
-+ for (i = 0; i < pgcount; i++) {
-+ flush_dcache_page(maplist[i]);
-+
-+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+ list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+ ofs = 0; /* all subsequent transfers start at beginning of a page */
-+ count = count - pagelen;
-+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+ }
-+ list->nr_transfers = pgcount;
-+
-+ /* Perform transfer on SPI bus */
-+ spi_access_bus(spi_device);
-+ spi_transfer(list);
-+ spi_release_bus(spi_device);
-+
-+ while (pgcount--) {
-+ page_cache_release (maplist[pgcount]);
-+ }
-+ flush_cache_all();
-+
-+ kfree(maplist);
-+ kfree(list);
-+
-+ return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ // TODO: This interface can be used to configure the SPI bus.
-+ // Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+ switch(cmd) {
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+ unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ /*
-+ * 'private_data' is actually a pointer, but we overload it with the
-+ * value we want to store.
-+ */
-+ file->private_data = (void *)spi_device;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = spidev_rd_wr,
-+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+ .ioctl = spidev_ioctl,
-+ .open = spidev_open,
-+ .release = spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+#endif
-+
-+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_DEVFS_FS
-+ devfs_mk_dir("spi");
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+ }
-+#endif
-+ printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_remove("spi/%d", i);
-+ }
-+
-+ devfs_remove("spi");
-+#endif
-+
-+ if (unregister_chrdev(SPI_MAJOR, "spi")) {
-+ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
-+ return;
-+ }
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN linux-2.6.20.4-0rig/drivers/char/Kconfig linux-2.6.20.4-atmel/drivers/char/Kconfig
---- linux-2.6.20.4-0rig/drivers/char/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/char/Kconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -1030,5 +1030,21 @@
- sysfs directory, /sys/devices/platform/telco_clock, with a number of
- files for controlling the behavior of this hardware.
-
-+config AT91_SPI
-+ bool "SPI driver (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200
-+ default y
-+ help
-+ The SPI driver gives access to this serial bus on the AT91RM9200
-+ processor.
-+
-+config AT91_SPIDEV
-+ bool "SPI device interface (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200 && AT91_SPI
-+ default n
-+ help
-+ The SPI driver gives user mode access to this serial
-+ bus on the AT91RM9200 processor.
-+
- endmenu
-
-diff -urN linux-2.6.20.4-0rig/drivers/char/Makefile linux-2.6.20.4-atmel/drivers/char/Makefile
---- linux-2.6.20.4-0rig/drivers/char/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/char/Makefile 2007-03-24 16:39:15.000000000 +0100
-@@ -90,6 +90,8 @@
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_AT91_SPI) += at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
-
- obj-$(CONFIG_WATCHDOG) += watchdog/
- obj-$(CONFIG_MWAVE) += mwave/
-diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/atmeltwi.h linux-2.6.20.4-atmel/drivers/i2c/busses/atmeltwi.h
---- linux-2.6.20.4-0rig/drivers/i2c/busses/atmeltwi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/i2c/busses/atmeltwi.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
-+
-+#ifndef __ASM_AVR32_TWI_H__
-+#define __ASM_AVR32_TWI_H__
-+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
-+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
-+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
-+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
-+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
-+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
-+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
-+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
-+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
-+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
-+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name,value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name,value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name,value))
-+
-+/* Register access macros */
-+#define twi_readl(port,reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
-+
-+#endif /* __ASM_AVR32_TWI_H__ */
-diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-at91.c linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-at91.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-at91.c 2007-03-24 16:39:15.000000000 +0100
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
-
--#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
-
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
-
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
- at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
-
- /* Calcuate clock dividers */
-- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- cdiv = cdiv + 1; /* round up */
- ckdiv = 0;
- while (cdiv > 255) {
-@@ -63,9 +66,14 @@
-
- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
- if (ckdiv > 5) {
-- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
- ckdiv = 5;
- }
-+ } else {
-+ if (ckdiv > 7) {
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 7;
-+ }
- }
-
- at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-atmeltwi.c linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-atmeltwi.c
---- linux-2.6.20.4-0rig/drivers/i2c/busses/i2c-atmeltwi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/i2c/busses/i2c-atmeltwi.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,348 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <asm/io.h>
-+#include <linux/time.h>
-+#include "atmeltwi.h"
-+
-+static unsigned int baudrate = CONFIG_I2C_ATMELTWI_BAUDRATE;
-+module_param(baudrate, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
-+
-+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ spinlock_t lock;
-+ struct completion comp;
-+ u32 intmask;
-+ u8 *buf;
-+ u8 len;
-+ u8 acks_left;
-+ unsigned int irq;
-+
-+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
-+
-+/*
-+ * Initialize the TWI hardware registers.
-+ */
-+static int __devinit twi_hwinit(struct atmel_twi *twi)
-+{
-+ unsigned long cdiv, ckdiv=0;
-+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
-+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
-+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
-+ }
-+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, (TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv)));
-+ return 0;
-+}
-+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out (~100ms).
-+ */
-+static short twi_wait_for_completion(struct atmel_twi *twi,
-+ u32 mask)
-+{
-+ int timeout = msecs_to_jiffies(100);
-+
-+ twi->intmask = mask;
-+ init_completion(&twi->comp);
-+
-+ twi_writel(twi, IER, mask);
-+
-+ if(!wait_for_completion_timeout(&twi->comp, timeout))
-+ return -ETIMEDOUT;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
-+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ struct i2c_msg *pmsg;
-+ int i;
-+
-+ /* get first message */
-+ pmsg = msgs;
-+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+ for (i = 0; i < num; i++, pmsg++) {
-+
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+ dev_dbg(&adap->dev,"#%d: internal addr %d %s byte%s %s 0x%02x\n",
-+ i,pmsg->len, pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+ if (pmsg->flags & I2C_M_RD) {
-+ twi_writel(twi, CR, TWI_BIT(START));
-+ if ( twi_wait_for_completion(twi,TWI_BIT(RXRDY))==-ETIMEDOUT ) {
-+ dev_dbg(&adap->dev, "RXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+
-+ /* Send Stop, and Wait until transfer is finished */
-+ if ( twi_wait_for_completion(twi,TWI_BIT(TXCOMP))==-ETIMEDOUT ) {
-+ dev_dbg(&adap->dev, "TXCOMP timeout\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ if ( twi_wait_for_completion(twi,TWI_BIT(TXRDY))==-ETIMEDOUT ) {
-+ dev_dbg(&adap->dev, "TXRDY timeout. Stopped with %d bytes left\n",
-+ twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ }
-+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+
-+ } /* end cur msg */
-+
-+ return i;
-+}
-+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
-+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
-+
-+ if (twi->intmask & status){
-+ if (twi->intmask & TWI_BIT(NACK)) {
-+ goto nack;
-+ } else if (twi->intmask & TWI_BIT(RXRDY)){
-+ twi->buf[twi->len - twi->acks_left] = twi_readl(twi,RHR);
-+ if(--twi->acks_left==1)
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ if (twi->acks_left==0)
-+ goto complete;
-+ } else if (twi->intmask & TWI_BIT(TXRDY)) {
-+ twi->acks_left--;
-+ if (twi->acks_left==0) {
-+ twi->intmask = TWI_BIT(TXCOMP);
-+ twi_writel(twi, IER, TWI_BIT(TXCOMP));
-+ } else
-+ twi_writel(twi, THR, twi->buf[twi->len - twi->acks_left]);
-+ } else if (twi->intmask & TWI_BIT(TXCOMP)) {
-+ goto complete;
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+
-+nack:
-+ printk(KERN_INFO "NACK received!\n");
-+
-+complete:
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
-+
-+ return IRQ_HANDLED;
-+
-+}
-+
-+
-+/*
-+ * Return list of supported functionality.
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+/* For now, we only handle combined mode (smbus) */
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
-+};
-+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __devinit twi_probe(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
-+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_err(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
-+ }
-+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
-+
-+ irq = platform_get_irq(pdev,0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
-+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
-+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_HWMON;
-+ adapter->dev.parent = &pdev->dev;
-+
-+ platform_set_drvdata(pdev, twi);
-+
-+ rc = i2c_add_adapter(adapter);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
-+
-+ dev_info(&pdev->dev, "Atmel TWI i2c bus device (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
-+
-+ return 0;
-+
-+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
-+
-+err_hw_init:
-+ free_irq(irq, twi);
-+
-+err_irq:
-+ iounmap(twi->regs);
-+
-+err_ioremap:
-+ kfree(twi);
-+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+
-+ return rc;
-+}
-+
-+static int __devexit twi_remove(struct platform_device *pdev)
-+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
-+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
-+
-+ return res;
-+}
-+
-+static struct platform_driver twi_driver = {
-+ .probe = twi_probe,
-+ .remove = __devexit_p(twi_remove),
-+ .driver = {
-+ .name = "atmel_twi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_twi_init(void)
-+{
-+ return platform_driver_register(&twi_driver);
-+}
-+
-+static void __exit atmel_twi_exit(void)
-+{
-+ platform_driver_unregister(&twi_driver);
-+}
-+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
-+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/Kconfig linux-2.6.20.4-atmel/drivers/i2c/busses/Kconfig
---- linux-2.6.20.4-0rig/drivers/i2c/busses/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/i2c/busses/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -5,6 +5,26 @@
- menu "I2C Hardware Bus support"
- depends on I2C
-
-+config I2C_ATMELTWI
-+ tristate "Atmel TWI/I2C"
-+ depends on I2C
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality. Atmel's TWI is compatible with Philips' I2C
-+ protocol. If in doubt, say NO
-+
-+config I2C_ATMELTWI_BAUDRATE
-+ prompt "Atmel TWI baudrate"
-+ depends on I2C_ATMELTWI
-+ int
-+ default 100000
-+ help
-+ Set the TWI/I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
-+
- config I2C_ALI1535
- tristate "ALI 1535"
- depends on I2C && PCI
-@@ -81,6 +101,14 @@
- This supports the use of the I2C interface on Atmel AT91
- processors.
-
-+config I2C_AT91_CLOCKRATE
-+ prompt "Atmel AT91 I2C/TWI clock-rate"
-+ depends on I2C_AT91
-+ int
-+ default 100000
-+ help
-+ Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on I2C && (SOC_AU1550 || SOC_AU1200)
-diff -urN linux-2.6.20.4-0rig/drivers/i2c/busses/Makefile linux-2.6.20.4-atmel/drivers/i2c/busses/Makefile
---- linux-2.6.20.4-0rig/drivers/i2c/busses/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/i2c/busses/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -46,6 +46,7 @@
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -urN linux-2.6.20.4-0rig/drivers/input/touchscreen/ads7846.c linux-2.6.20.4-atmel/drivers/input/touchscreen/ads7846.c
---- linux-2.6.20.4-0rig/drivers/input/touchscreen/ads7846.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/input/touchscreen/ads7846.c 2007-03-24 16:39:15.000000000 +0100
-@@ -17,8 +17,9 @@
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--#include <linux/device.h>
-+#include <linux/hwmon.h>
- #include <linux/init.h>
-+#include <linux/err.h>
- #include <linux/delay.h>
- #include <linux/input.h>
- #include <linux/interrupt.h>
-@@ -38,7 +39,8 @@
- /*
- * This code has been heavily tested on a Nokia 770, and lightly
- * tested on other ads7846 devices (OSK/Mistral, Lubbock).
-- * Support for ads7843 and ads7845 has only been stubbed in.
-+ * Support for ads7843 tested on Atmel at91sam926x-EK.
-+ * Support for ads7845 has only been stubbed in.
- *
- * IRQ handling needs a workaround because of a shortcoming in handling
- * edge triggered IRQs on some platforms like the OMAP1/2. These
-@@ -54,7 +56,8 @@
- * files.
- */
-
--#define TS_POLL_PERIOD msecs_to_jiffies(10)
-+#define TS_POLL_DELAY (1 * 1000000) /* ns delay before the first sample */
-+#define TS_POLL_PERIOD (5 * 1000000) /* ns delay between samples */
-
- /* this driver doesn't aim at the peak continuous sample rate */
- #define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
-@@ -63,12 +66,12 @@
- /* For portability, we can't read 12 bit values using SPI (which
- * would make the controller deliver them as native byteorder u16
- * with msbs zeroed). Instead, we read them as two 8-bit values,
-- * which need byteswapping then range adjustment.
-+ * *** WHICH NEED BYTESWAPPING *** and range adjustment.
- */
-- __be16 x;
-- __be16 y;
-- __be16 z1, z2;
-- int ignore;
-+ u16 x;
-+ u16 y;
-+ u16 z1, z2;
-+ int ignore;
- };
-
- struct ads7846 {
-@@ -76,7 +79,12 @@
- char phys[32];
-
- struct spi_device *spi;
-+
-+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
- struct attribute_group *attr_group;
-+ struct class_device *hwmon;
-+#endif
-+
- u16 model;
- u16 vref_delay_usecs;
- u16 x_plate_ohms;
-@@ -99,13 +107,16 @@
- u16 debounce_rep;
-
- spinlock_t lock;
-- struct timer_list timer; /* P: lock */
-+ struct hrtimer timer;
- unsigned pendown:1; /* P: lock */
- unsigned pending:1; /* P: lock */
- // FIXME remove "irq_disabled"
- unsigned irq_disabled:1; /* P: lock */
- unsigned disabled:1;
-
-+ int (*filter)(void *data, int data_idx, int *val);
-+ void *filter_data;
-+ void (*filter_cleanup)(void *data);
- int (*get_pendown_state)(void);
- };
-
-@@ -142,15 +153,16 @@
- #define MAX_12BIT ((1<<12)-1)
-
- /* leave ADC powered up (disables penirq) between differential samples */
--#define READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \
-- | ADS_12_BIT | ADS_DFR)
--
--#define READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ADC_ON)
--#define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
--#define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-+#define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
-+ | ADS_12_BIT | ADS_DFR | \
-+ (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
-+
-+#define READ_Y(vref) (READ_12BIT_DFR(y, 1, vref))
-+#define READ_Z1(vref) (READ_12BIT_DFR(z1, 1, vref))
-+#define READ_Z2(vref) (READ_12BIT_DFR(z2, 1, vref))
-
--#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_ADC_ON)
--#define PWRDOWN (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) /* LAST */
-+#define READ_X(vref) (READ_12BIT_DFR(x, 1, vref))
-+#define PWRDOWN (READ_12BIT_DFR(y, 0, 0)) /* LAST */
-
- /* single-ended samples need to first power up reference voltage;
- * we leave both ADC and VREF powered
-@@ -158,14 +170,19 @@
- #define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
- | ADS_12_BIT | ADS_SER)
-
--#define REF_ON (READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
--#define REF_OFF (READ_12BIT_DFR(y) | ADS_PD10_PDOWN)
-+#define REF_ON (READ_12BIT_DFR(x, 1, 1))
-+#define REF_OFF (READ_12BIT_DFR(y, 0, 0))
-
- /*--------------------------------------------------------------------------*/
-
- /*
- * Non-touchscreen sensors only use single-ended conversions.
-+ * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
-+ * ads7846 lets that pin be unconnected, to use internal vREF.
- */
-+static unsigned vREF_mV;
-+module_param(vREF_mV, uint, 0);
-+MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts");
-
- struct ser_req {
- u8 ref_on;
-@@ -193,50 +210,53 @@
- struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL);
- int status;
- int sample;
-- int i;
-+ int use_internal;
-
- if (!req)
- return -ENOMEM;
-
- spi_message_init(&req->msg);
-
-- /* activate reference, so it has time to settle; */
-- req->ref_on = REF_ON;
-- req->xfer[0].tx_buf = &req->ref_on;
-- req->xfer[0].len = 1;
-- req->xfer[1].rx_buf = &req->scratch;
-- req->xfer[1].len = 2;
--
-- /*
-- * for external VREF, 0 usec (and assume it's always on);
-- * for 1uF, use 800 usec;
-- * no cap, 100 usec.
-- */
-- req->xfer[1].delay_usecs = ts->vref_delay_usecs;
-+ /* FIXME boards with ads7846 might use external vref instead ... */
-+ use_internal = (ts->model == 7846);
-+
-+ /* maybe turn on internal vREF, and let it settle */
-+ if (use_internal) {
-+ req->ref_on = REF_ON;
-+ req->xfer[0].tx_buf = &req->ref_on;
-+ req->xfer[0].len = 1;
-+ spi_message_add_tail(&req->xfer[0], &req->msg);
-+
-+ req->xfer[1].rx_buf = &req->scratch;
-+ req->xfer[1].len = 2;
-+
-+ /* for 1uF, settle for 800 usec; no cap, 100 usec. */
-+ req->xfer[1].delay_usecs = ts->vref_delay_usecs;
-+ spi_message_add_tail(&req->xfer[1], &req->msg);
-+ }
-
- /* take sample */
- req->command = (u8) command;
- req->xfer[2].tx_buf = &req->command;
- req->xfer[2].len = 1;
-+ spi_message_add_tail(&req->xfer[2], &req->msg);
-+
- req->xfer[3].rx_buf = &req->sample;
- req->xfer[3].len = 2;
-+ spi_message_add_tail(&req->xfer[3], &req->msg);
-
- /* REVISIT: take a few more samples, and compare ... */
-
-- /* turn off reference */
-- req->ref_off = REF_OFF;
-+ /* converter in low power mode & enable PENIRQ */
-+ req->ref_off = PWRDOWN;
- req->xfer[4].tx_buf = &req->ref_off;
- req->xfer[4].len = 1;
-+ spi_message_add_tail(&req->xfer[4], &req->msg);
-+
- req->xfer[5].rx_buf = &req->scratch;
- req->xfer[5].len = 2;
--
- CS_CHANGE(req->xfer[5]);
--
-- /* group all the transfers together, so we can't interfere with
-- * reading touchscreen state; disable penirq while sampling
-- */
-- for (i = 0; i < 6; i++)
-- spi_message_add_tail(&req->xfer[i], &req->msg);
-+ spi_message_add_tail(&req->xfer[5], &req->msg);
-
- ts->irq_disabled = 1;
- disable_irq(spi->irq);
-@@ -256,25 +276,173 @@
- return status ? status : sample;
- }
-
--#define SHOW(name) static ssize_t \
-+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
-+
-+#define SHOW(name, var, adjust) static ssize_t \
- name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
- { \
-+ struct ads7846 *ts = dev_get_drvdata(dev); \
- ssize_t v = ads7846_read12_ser(dev, \
-- READ_12BIT_SER(name) | ADS_PD10_ALL_ON); \
-+ READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \
- if (v < 0) \
- return v; \
-- return sprintf(buf, "%u\n", (unsigned) v); \
-+ return sprintf(buf, "%u\n", adjust(ts, v)); \
- } \
- static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
-
--SHOW(temp0)
--SHOW(temp1)
--SHOW(vaux)
--SHOW(vbatt)
-+
-+/* Sysfs conventions report temperatures in millidegrees Celcius.
-+ * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
-+ * accuracy scheme without calibration data. For now we won't try either;
-+ * userspace sees raw sensor values, and must scale/calibrate appropriately.
-+ */
-+static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
-+{
-+ return v;
-+}
-+
-+SHOW(temp0, temp0, null_adjust) /* temp1_input */
-+SHOW(temp1, temp1, null_adjust) /* temp2_input */
-+
-+
-+/* sysfs conventions report voltages in millivolts. We can convert voltages
-+ * if we know vREF. userspace may need to scale vAUX to match the board's
-+ * external resistors; we assume that vBATT only uses the internal ones.
-+ */
-+static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
-+{
-+ unsigned retval = v;
-+
-+ /* external resistors may scale vAUX into 0..vREF */
-+ retval *= vREF_mV;
-+ retval = retval >> 12;
-+ return retval;
-+}
-+
-+static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
-+{
-+ unsigned retval = vaux_adjust(ts, v);
-+
-+ /* ads7846 has a resistor ladder to scale this signal down */
-+ if (ts->model == 7846)
-+ retval *= 4;
-+ return retval;
-+}
-+
-+SHOW(in0_input, vaux, vaux_adjust)
-+SHOW(in1_input, vbatt, vbatt_adjust)
-+
-+
-+static struct attribute *ads7846_attributes[] = {
-+ &dev_attr_temp0.attr,
-+ &dev_attr_temp1.attr,
-+ &dev_attr_in0_input.attr,
-+ &dev_attr_in1_input.attr,
-+ NULL,
-+};
-+
-+static struct attribute_group ads7846_attr_group = {
-+ .attrs = ads7846_attributes,
-+};
-+
-+static struct attribute *ads7843_attributes[] = {
-+ &dev_attr_in0_input.attr,
-+ &dev_attr_in1_input.attr,
-+ NULL,
-+};
-+
-+static struct attribute_group ads7843_attr_group = {
-+ .attrs = ads7843_attributes,
-+};
-+
-+static struct attribute *ads7845_attributes[] = {
-+ &dev_attr_in0_input.attr,
-+ NULL,
-+};
-+
-+static struct attribute_group ads7845_attr_group = {
-+ .attrs = ads7845_attributes,
-+};
-+
-+static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
-+{
-+ struct class_device *hwmon;
-+ int err;
-+
-+ /* hwmon sensors need a reference voltage */
-+ switch (ts->model) {
-+ case 7846:
-+ if (!vREF_mV) {
-+ dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
-+ vREF_mV = 2500;
-+ }
-+ break;
-+ case 7845:
-+ case 7843:
-+ if (!vREF_mV) {
-+ dev_warn(&spi->dev,
-+ "external vREF for ADS%d not specified\n",
-+ ts->model);
-+ return 0;
-+ }
-+ break;
-+ }
-+
-+ /* different chips have different sensor groups */
-+ switch (ts->model) {
-+ case 7846:
-+ ts->attr_group = &ads7846_attr_group;
-+ break;
-+ case 7845:
-+ ts->attr_group = &ads7845_attr_group;
-+ break;
-+ case 7843:
-+ ts->attr_group = &ads7843_attr_group;
-+ break;
-+ default:
-+ dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model);
-+ return 0;
-+ }
-+
-+ err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
-+ if (err)
-+ return err;
-+
-+ hwmon = hwmon_device_register(&spi->dev);
-+ if (IS_ERR(hwmon)) {
-+ sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
-+ return PTR_ERR(hwmon);
-+ }
-+
-+ ts->hwmon = hwmon;
-+ return 0;
-+}
-+
-+static void ads784x_hwmon_unregister(struct spi_device *spi,
-+ struct ads7846 *ts)
-+{
-+ if (ts->hwmon) {
-+ sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
-+ hwmon_device_unregister(ts->hwmon);
-+ }
-+}
-+
-+#else
-+static inline int ads784x_hwmon_register(struct spi_device *spi,
-+ struct ads7846 *ts)
-+{
-+ return 0;
-+}
-+
-+static inline void ads784x_hwmon_unregister(struct spi_device *spi,
-+ struct ads7846 *ts)
-+{
-+}
-+#endif
-
- static int is_pen_down(struct device *dev)
- {
-- struct ads7846 *ts = dev_get_drvdata(dev);
-+ struct ads7846 *ts = dev_get_drvdata(dev);
-
- return ts->pendown;
- }
-@@ -318,46 +486,14 @@
-
- static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
-
--static struct attribute *ads7846_attributes[] = {
-- &dev_attr_temp0.attr,
-- &dev_attr_temp1.attr,
-- &dev_attr_vbatt.attr,
-- &dev_attr_vaux.attr,
-- &dev_attr_pen_down.attr,
-- &dev_attr_disable.attr,
-- NULL,
--};
--
--static struct attribute_group ads7846_attr_group = {
-- .attrs = ads7846_attributes,
--};
--
--/*
-- * ads7843/7845 don't have temperature sensors, and
-- * use the other sensors a bit differently too
-- */
--
--static struct attribute *ads7843_attributes[] = {
-- &dev_attr_vbatt.attr,
-- &dev_attr_vaux.attr,
-+static struct attribute *ads784x_attributes[] = {
- &dev_attr_pen_down.attr,
- &dev_attr_disable.attr,
- NULL,
- };
-
--static struct attribute_group ads7843_attr_group = {
-- .attrs = ads7843_attributes,
--};
--
--static struct attribute *ads7845_attributes[] = {
-- &dev_attr_vaux.attr,
-- &dev_attr_pen_down.attr,
-- &dev_attr_disable.attr,
-- NULL,
--};
--
--static struct attribute_group ads7845_attr_group = {
-- .attrs = ads7845_attributes,
-+static struct attribute_group ads784x_attr_group = {
-+ .attrs = ads784x_attributes,
- };
-
- /*--------------------------------------------------------------------------*/
-@@ -373,25 +509,22 @@
- static void ads7846_rx(void *ads)
- {
- struct ads7846 *ts = ads;
-- struct input_dev *input_dev = ts->input;
- unsigned Rt;
-- unsigned sync = 0;
- u16 x, y, z1, z2;
-- unsigned long flags;
-
-- /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
-- * built from two 8 bit values written msb-first.
-+ /* ads7846_rx_val() did in-place conversion (including byteswap) from
-+ * on-the-wire format as part of debouncing to get stable readings.
- */
-- x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
-- y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
-- z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
-- z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
-+ x = ts->tc.x;
-+ y = ts->tc.y;
-+ z1 = ts->tc.z1;
-+ z2 = ts->tc.z2;
-
- /* range filtering */
- if (x == MAX_12BIT)
- x = 0;
-
-- if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
-+ if (likely(x && z1)) {
- /* compute touch pressure resistance using equation #2 */
- Rt = z2;
- Rt -= z1;
-@@ -402,101 +535,134 @@
- } else
- Rt = 0;
-
-+ if (ts->model == 7843)
-+ Rt = ts->pressure_max / 2;
-+
-+
- /* Sample found inconsistent by debouncing or pressure is beyond
-- * the maximum. Don't report it to user space, repeat at least
-- * once more the measurement */
-+ * the maximum. Don't report it to user space, repeat at least
-+ * once more the measurement
-+ */
- if (ts->tc.ignore || Rt > ts->pressure_max) {
-- mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-+#ifdef VERBOSE
-+ pr_debug("%s: ignored %d pressure %d\n",
-+ ts->spi->dev.bus_id, ts->tc.ignore, Rt);
-+#endif
-+ hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
-+ HRTIMER_REL);
- return;
- }
-
-- /* NOTE: "pendown" is inferred from pressure; we don't rely on
-- * being able to check nPENIRQ status, or "friendly" trigger modes
-- * (both-edges is much better than just-falling or low-level).
-- *
-- * REVISIT: some boards may require reading nPENIRQ; it's
-- * needed on 7843. and 7845 reads pressure differently...
-+ /* NOTE: We can't rely on the pressure to determine the pen down
-+ * state, even this controller has a pressure sensor. The pressure
-+ * value can fluctuate for quite a while after lifting the pen and
-+ * in some cases may not even settle at the expected value.
- *
-- * REVISIT: the touchscreen might not be connected; this code
-- * won't notice that, even if nPENIRQ never fires ...
-+ * The only safe way to check for the pen up condition is in the
-+ * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
- */
-- if (!ts->pendown && Rt != 0) {
-- input_report_key(input_dev, BTN_TOUCH, 1);
-- sync = 1;
-- } else if (ts->pendown && Rt == 0) {
-- input_report_key(input_dev, BTN_TOUCH, 0);
-- sync = 1;
-- }
--
- if (Rt) {
-- input_report_abs(input_dev, ABS_X, x);
-- input_report_abs(input_dev, ABS_Y, y);
-- sync = 1;
-- }
-+ struct input_dev *input = ts->input;
-
-- if (sync) {
-- input_report_abs(input_dev, ABS_PRESSURE, Rt);
-- input_sync(input_dev);
-- }
--
--#ifdef VERBOSE
-- if (Rt || ts->pendown)
-- pr_debug("%s: %d/%d/%d%s\n", ts->spi->dev.bus_id,
-- x, y, Rt, Rt ? "" : " UP");
-+ if (!ts->pendown) {
-+ input_report_key(input, BTN_TOUCH, 1);
-+ ts->pendown = 1;
-+#ifdef VERBOSE
-+ dev_dbg(&ts->spi->dev, "DOWN\n");
- #endif
-+ }
-+ input_report_abs(input, ABS_X, x);
-+ input_report_abs(input, ABS_Y, y);
-+ input_report_abs(input, ABS_PRESSURE, Rt);
-+
-+ input_sync(input);
-+#ifdef VERBOSE
-+ dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
-+#endif
-+ }
-
-- spin_lock_irqsave(&ts->lock, flags);
--
-- ts->pendown = (Rt != 0);
-- mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
--
-- spin_unlock_irqrestore(&ts->lock, flags);
-+ hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), HRTIMER_REL);
- }
-
--static void ads7846_debounce(void *ads)
-+static int ads7846_debounce(void *ads, int data_idx, int *val)
- {
- struct ads7846 *ts = ads;
-- struct spi_message *m;
-- struct spi_transfer *t;
-- int val;
-- int status;
-
-- m = &ts->msg[ts->msg_idx];
-- t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-- val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
-- if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
-+ if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
-+ /* Start over collecting consistent readings. */
-+ ts->read_rep = 0;
- /* Repeat it, if this was the first read or the read
- * wasn't consistent enough. */
- if (ts->read_cnt < ts->debounce_max) {
-- ts->last_read = val;
-+ ts->last_read = *val;
- ts->read_cnt++;
-+ return ADS7846_FILTER_REPEAT;
- } else {
- /* Maximum number of debouncing reached and still
- * not enough number of consistent readings. Abort
- * the whole sample, repeat it in the next sampling
- * period.
- */
-- ts->tc.ignore = 1;
- ts->read_cnt = 0;
-- /* Last message will contain ads7846_rx() as the
-- * completion function.
-- */
-- m = ts->last_msg;
-+ return ADS7846_FILTER_IGNORE;
- }
-- /* Start over collecting consistent readings. */
-- ts->read_rep = 0;
- } else {
- if (++ts->read_rep > ts->debounce_rep) {
- /* Got a good reading for this coordinate,
- * go for the next one. */
-- ts->tc.ignore = 0;
-- ts->msg_idx++;
- ts->read_cnt = 0;
- ts->read_rep = 0;
-- m++;
-- } else
-+ return ADS7846_FILTER_OK;
-+ } else {
- /* Read more values that are consistent. */
- ts->read_cnt++;
-+ return ADS7846_FILTER_REPEAT;
-+ }
-+ }
-+}
-+
-+static int ads7846_no_filter(void *ads, int data_idx, int *val)
-+{
-+ return ADS7846_FILTER_OK;
-+}
-+
-+static void ads7846_rx_val(void *ads)
-+{
-+ struct ads7846 *ts = ads;
-+ struct spi_message *m;
-+ struct spi_transfer *t;
-+ u16 *rx_val;
-+ int val;
-+ int action;
-+ int status;
-+
-+ m = &ts->msg[ts->msg_idx];
-+ t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
-+ rx_val = t->rx_buf;
-+
-+ /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
-+ * built from two 8 bit values written msb-first.
-+ */
-+ val = be16_to_cpu(*rx_val) >> 3;
-+
-+ action = ts->filter(ts->filter_data, ts->msg_idx, &val);
-+ switch (action) {
-+ case ADS7846_FILTER_REPEAT:
-+ break;
-+ case ADS7846_FILTER_IGNORE:
-+ ts->tc.ignore = 1;
-+ /* Last message will contain ads7846_rx() as the
-+ * completion function.
-+ */
-+ m = ts->last_msg;
-+ break;
-+ case ADS7846_FILTER_OK:
-+ *rx_val = val;
-+ ts->tc.ignore = 0;
-+ m = &ts->msg[++ts->msg_idx];
-+ break;
-+ default:
-+ BUG();
- }
- status = spi_async(ts->spi, m);
- if (status)
-@@ -504,21 +670,34 @@
- status);
- }
-
--static void ads7846_timer(unsigned long handle)
-+static int ads7846_timer(struct hrtimer *handle)
- {
-- struct ads7846 *ts = (void *)handle;
-+ struct ads7846 *ts = container_of(handle, struct ads7846, timer);
- int status = 0;
-
- spin_lock_irq(&ts->lock);
-
-- if (unlikely(ts->msg_idx && !ts->pendown)) {
-+ if (unlikely(!ts->get_pendown_state() ||
-+ device_suspended(&ts->spi->dev))) {
-+ if (ts->pendown) {
-+ struct input_dev *input = ts->input;
-+
-+ input_report_key(input, BTN_TOUCH, 0);
-+ input_report_abs(input, ABS_PRESSURE, 0);
-+ input_sync(input);
-+
-+ ts->pendown = 0;
-+#ifdef VERBOSE
-+ dev_dbg(&ts->spi->dev, "UP\n");
-+#endif
-+ }
-+
- /* measurement cycle ended */
- if (!device_suspended(&ts->spi->dev)) {
- ts->irq_disabled = 0;
- enable_irq(ts->spi->irq);
- }
- ts->pending = 0;
-- ts->msg_idx = 0;
- } else {
- /* pen is still down, continue with the measurement */
- ts->msg_idx = 0;
-@@ -528,6 +707,7 @@
- }
-
- spin_unlock_irq(&ts->lock);
-+ return HRTIMER_NORESTART;
- }
-
- static irqreturn_t ads7846_irq(int irq, void *handle)
-@@ -546,7 +726,8 @@
- ts->irq_disabled = 1;
- disable_irq(ts->spi->irq);
- ts->pending = 1;
-- mod_timer(&ts->timer, jiffies);
-+ hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
-+ HRTIMER_REL);
- }
- }
- spin_unlock_irqrestore(&ts->lock, flags);
-@@ -632,6 +813,7 @@
- struct ads7846_platform_data *pdata = spi->dev.platform_data;
- struct spi_message *m;
- struct spi_transfer *x;
-+ int vref;
- int err;
-
- if (!spi->irq) {
-@@ -665,6 +847,10 @@
- * may not. So we stick to very-portable 8 bit words, both RX and TX.
- */
- spi->bits_per_word = 8;
-+ spi->mode = SPI_MODE_1;
-+ err = spi_setup(spi);
-+ if (err < 0)
-+ return err;
-
- ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
- input_dev = input_allocate_device();
-@@ -679,8 +865,7 @@
- ts->spi = spi;
- ts->input = input_dev;
-
-- init_timer(&ts->timer);
-- ts->timer.data = (unsigned long) ts;
-+ hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_REL);
- ts->timer.function = ads7846_timer;
-
- spin_lock_init(&ts->lock);
-@@ -689,14 +874,25 @@
- ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
- ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
- ts->pressure_max = pdata->pressure_max ? : ~0;
-- if (pdata->debounce_max) {
-+
-+ if (pdata->filter != NULL) {
-+ if (pdata->filter_init != NULL) {
-+ err = pdata->filter_init(pdata, &ts->filter_data);
-+ if (err < 0)
-+ goto err_free_mem;
-+ }
-+ ts->filter = pdata->filter;
-+ ts->filter_cleanup = pdata->filter_cleanup;
-+ } else if (pdata->debounce_max) {
- ts->debounce_max = pdata->debounce_max;
-+ if (ts->debounce_max < 2)
-+ ts->debounce_max = 2;
- ts->debounce_tol = pdata->debounce_tol;
- ts->debounce_rep = pdata->debounce_rep;
-- if (ts->debounce_rep > ts->debounce_max + 1)
-- ts->debounce_rep = ts->debounce_max - 1;
-+ ts->filter = ads7846_debounce;
-+ ts->filter_data = ts;
- } else
-- ts->debounce_tol = ~0;
-+ ts->filter = ads7846_no_filter;
- ts->get_pendown_state = pdata->get_pendown_state;
-
- snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
-@@ -718,6 +914,8 @@
- input_set_abs_params(input_dev, ABS_PRESSURE,
- pdata->pressure_min, pdata->pressure_max, 0, 0);
-
-+ vref = pdata->keep_vref_on;
-+
- /* set up the transfers to read touchscreen state; this assumes we
- * use formula #2 for pressure, not #3.
- */
-@@ -727,7 +925,7 @@
- spi_message_init(m);
-
- /* y- still on; turn on only y+ (and ADC) */
-- ts->read_y = READ_Y;
-+ ts->read_y = READ_Y(vref);
- x->tx_buf = &ts->read_y;
- x->len = 1;
- spi_message_add_tail(x, m);
-@@ -737,7 +935,7 @@
- x->len = 2;
- spi_message_add_tail(x, m);
-
-- m->complete = ads7846_debounce;
-+ m->complete = ads7846_rx_val;
- m->context = ts;
-
- m++;
-@@ -745,7 +943,7 @@
-
- /* turn y- off, x+ on, then leave in lowpower */
- x++;
-- ts->read_x = READ_X;
-+ ts->read_x = READ_X(vref);
- x->tx_buf = &ts->read_x;
- x->len = 1;
- spi_message_add_tail(x, m);
-@@ -755,7 +953,7 @@
- x->len = 2;
- spi_message_add_tail(x, m);
-
-- m->complete = ads7846_debounce;
-+ m->complete = ads7846_rx_val;
- m->context = ts;
-
- /* turn y+ off, x- on; we'll use formula #2 */
-@@ -764,7 +962,7 @@
- spi_message_init(m);
-
- x++;
-- ts->read_z1 = READ_Z1;
-+ ts->read_z1 = READ_Z1(vref);
- x->tx_buf = &ts->read_z1;
- x->len = 1;
- spi_message_add_tail(x, m);
-@@ -774,14 +972,14 @@
- x->len = 2;
- spi_message_add_tail(x, m);
-
-- m->complete = ads7846_debounce;
-+ m->complete = ads7846_rx_val;
- m->context = ts;
-
- m++;
- spi_message_init(m);
-
- x++;
-- ts->read_z2 = READ_Z2;
-+ ts->read_z2 = READ_Z2(vref);
- x->tx_buf = &ts->read_z2;
- x->len = 1;
- spi_message_add_tail(x, m);
-@@ -791,7 +989,7 @@
- x->len = 2;
- spi_message_add_tail(x, m);
-
-- m->complete = ads7846_debounce;
-+ m->complete = ads7846_rx_val;
- m->context = ts;
- }
-
-@@ -820,31 +1018,24 @@
- spi->dev.driver->name, ts)) {
- dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
- err = -EBUSY;
-- goto err_free_mem;
-+ goto err_cleanup_filter;
- }
-
-+ err = ads784x_hwmon_register(spi, ts);
-+ if (err)
-+ goto err_free_irq;
-+
- dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
-
-- /* take a first sample, leaving nPENIRQ active; avoid
-+ /* take a first sample, leaving nPENIRQ active and vREF off; avoid
- * the touchscreen, in case it's not connected.
- */
- (void) ads7846_read12_ser(&spi->dev,
- READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
-
-- switch (ts->model) {
-- case 7846:
-- ts->attr_group = &ads7846_attr_group;
-- break;
-- case 7845:
-- ts->attr_group = &ads7845_attr_group;
-- break;
-- default:
-- ts->attr_group = &ads7843_attr_group;
-- break;
-- }
-- err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
-+ err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
- if (err)
-- goto err_free_irq;
-+ goto err_remove_hwmon;
-
- err = input_register_device(input_dev);
- if (err)
-@@ -853,9 +1044,14 @@
- return 0;
-
- err_remove_attr_group:
-- sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
-+ sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
-+ err_remove_hwmon:
-+ ads784x_hwmon_unregister(spi, ts);
- err_free_irq:
- free_irq(spi->irq, ts);
-+ err_cleanup_filter:
-+ if (ts->filter_cleanup)
-+ ts->filter_cleanup(ts->filter_data);
- err_free_mem:
- input_free_device(input_dev);
- kfree(ts);
-@@ -866,16 +1062,20 @@
- {
- struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-
-+ ads784x_hwmon_unregister(spi, ts);
- input_unregister_device(ts->input);
-
- ads7846_suspend(spi, PMSG_SUSPEND);
-
-- sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
-+ sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
-
- free_irq(ts->spi->irq, ts);
- /* suspend left the IRQ disabled */
- enable_irq(ts->spi->irq);
-
-+ if (ts->filter_cleanup)
-+ ts->filter_cleanup(ts->filter_data);
-+
- kfree(ts);
-
- dev_dbg(&spi->dev, "unregistered touchscreen\n");
-diff -urN linux-2.6.20.4-0rig/drivers/leds/Kconfig linux-2.6.20.4-atmel/drivers/leds/Kconfig
---- linux-2.6.20.4-0rig/drivers/leds/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/leds/Kconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -76,6 +76,13 @@
- This option enables support for the Soekris net4801 and net4826 error
- LED.
-
-+config LEDS_AT91
-+ tristate "LED support using AT91 GPIOs"
-+ depends on LEDS_CLASS && ARCH_AT91 && !LEDS
-+ help
-+ This option enables support for LEDs connected to GPIO lines
-+ on AT91-based boards.
-+
- config LEDS_WRAP
- tristate "LED Support for the WRAP series LEDs"
- depends on LEDS_CLASS && SCx200_GPIO
-diff -urN linux-2.6.20.4-0rig/drivers/leds/leds-at91.c linux-2.6.20.4-atmel/drivers/leds/leds-at91.c
---- linux-2.6.20.4-0rig/drivers/leds/leds-at91.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/leds/leds-at91.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,140 @@
-+/*
-+ * AT91 GPIO based LED driver
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */
-+
-+struct at91_led {
-+ struct led_classdev cdev;
-+ struct list_head list;
-+ struct at91_gpio_led *led_data;
-+};
-+
-+/*
-+ * Change the state of the LED.
-+ */
-+static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
-+{
-+ struct at91_led *led = container_of(cdev, struct at91_led, cdev);
-+ short active = (value == LED_OFF);
-+
-+ if (led->led_data->flags & 1) /* active high/low? */
-+ active = !active;
-+ at91_set_gpio_value(led->led_data->gpio, value == LED_OFF);
-+}
-+
-+static int __devexit at91_led_remove(struct platform_device *pdev)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_unregister(&led->cdev);
-+
-+#warning "Free allocated memory"
-+ // TODO: Free memory. kfree(led);
-+
-+ return 0;
-+}
-+
-+static int __init at91_led_probe(struct platform_device *pdev)
-+{
-+ int status = 0;
-+ struct at91_gpio_led *pdata = pdev->dev.platform_data;
-+ unsigned nr_leds;
-+ struct at91_led *led;
-+
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ nr_leds = pdata->index; /* first index stores number of LEDs */
-+
-+ while (nr_leds--) {
-+ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
-+ if (!led) {
-+ dev_err(&pdev->dev, "No memory for device\n");
-+ status = -ENOMEM;
-+ goto cleanup;
-+ }
-+ led->led_data = pdata;
-+ led->cdev.name = pdata->name;
-+ led->cdev.brightness_set = at91_led_set,
-+ led->cdev.default_trigger = pdata->trigger;
-+
-+ status = led_classdev_register(&pdev->dev, &led->cdev);
-+ if (status < 0) {
-+ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
-+cleanup:
-+ at91_led_remove(pdev);
-+ break;
-+ }
-+ list_add(&led->list, &at91_led_list);
-+ pdata++;
-+ }
-+ return status;
-+}
-+
-+#ifdef CONFIG_PM
-+static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_suspend(&led->cdev);
-+
-+ return 0;
-+}
-+
-+static int at91_led_resume(struct platform_device *dev)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_resume(&led->cdev);
-+
-+ return 0;
-+}
-+#else
-+#define at91_led_suspend NULL
-+#define at91_led_resume NULL
-+#endif
-+
-+static struct platform_driver at91_led_driver = {
-+ .probe = at91_led_probe,
-+ .remove = __devexit_p(at91_led_remove),
-+ .suspend = at91_led_suspend,
-+ .resume = at91_led_resume,
-+ .driver = {
-+ .name = "at91_leds",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_led_init(void)
-+{
-+ return platform_driver_register(&at91_led_driver);
-+}
-+module_init(at91_led_init);
-+
-+static void __exit at91_led_exit(void)
-+{
-+ platform_driver_unregister(&at91_led_driver);
-+}
-+module_exit(at91_led_exit);
-+
-+MODULE_DESCRIPTION("AT91 GPIO LED driver");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/leds/Makefile linux-2.6.20.4-atmel/drivers/leds/Makefile
---- linux-2.6.20.4-0rig/drivers/leds/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/leds/Makefile 2007-03-24 16:39:15.000000000 +0100
-@@ -14,6 +14,7 @@
- obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
- obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
- obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
-+obj-$(CONFIG_LEDS_AT91) += leds-at91.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff -urN linux-2.6.20.4-0rig/drivers/mmc/at91_mci.c linux-2.6.20.4-atmel/drivers/mmc/at91_mci.c
---- linux-2.6.20.4-0rig/drivers/mmc/at91_mci.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mmc/at91_mci.c 2007-03-24 16:39:15.000000000 +0100
-@@ -64,6 +64,7 @@
- #include <linux/err.h>
- #include <linux/dma-mapping.h>
- #include <linux/clk.h>
-+#include <linux/atmel_pdc.h>
-
- #include <linux/mmc/host.h>
- #include <linux/mmc/protocol.h>
-@@ -75,7 +76,7 @@
- #include <asm/arch/cpu.h>
- #include <asm/arch/gpio.h>
- #include <asm/arch/at91_mci.h>
--#include <asm/arch/at91_pdc.h>
-+
-
- #define DRIVER_NAME "at91_mci"
-
-@@ -85,8 +86,8 @@
- #define FL_SENT_STOP (1 << 1)
-
- #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
-- | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
-- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-+ | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
-+ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-
- #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
- #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-@@ -211,13 +212,13 @@
-
- /* Check to see if this needs filling */
- if (i == 0) {
-- if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
-+ if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
- pr_debug("Transfer active in current\n");
- continue;
- }
- }
- else {
-- if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
-+ if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
- pr_debug("Transfer active in next\n");
- continue;
- }
-@@ -234,12 +235,12 @@
- pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
-
- if (i == 0) {
-- at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
-- at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
-+ at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
-+ at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
- }
- else {
-- at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
-- at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
-+ at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
-+ at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
- }
- }
-
-@@ -303,37 +304,12 @@
- at91mci_pre_dma_read(host);
- else {
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
-+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
- }
-
- pr_debug("post dma read done\n");
- }
-
--/*
-- * Handle transmitted data
-- */
--static void at91_mci_handle_transmitted(struct at91mci_host *host)
--{
-- struct mmc_command *cmd;
-- struct mmc_data *data;
--
-- pr_debug("Handling the transmit\n");
--
-- /* Disable the transfer */
-- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
--
-- /* Now wait for cmd ready */
-- at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
--
-- cmd = host->cmd;
-- if (!cmd) return;
--
-- data = cmd->data;
-- if (!data) return;
--
-- data->bytes_xfered = host->total_length;
--}
-
- /*
- * Enable the controller
-@@ -431,15 +407,15 @@
- cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
-
- if (!data) {
-- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
-- at91_mci_write(host, AT91_PDC_RPR, 0);
-- at91_mci_write(host, AT91_PDC_RCR, 0);
-- at91_mci_write(host, AT91_PDC_RNPR, 0);
-- at91_mci_write(host, AT91_PDC_RNCR, 0);
-- at91_mci_write(host, AT91_PDC_TPR, 0);
-- at91_mci_write(host, AT91_PDC_TCR, 0);
-- at91_mci_write(host, AT91_PDC_TNPR, 0);
-- at91_mci_write(host, AT91_PDC_TNCR, 0);
-+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
-+ at91_mci_write(host, ATMEL_PDC_RPR, 0);
-+ at91_mci_write(host, ATMEL_PDC_RCR, 0);
-+ at91_mci_write(host, ATMEL_PDC_RNPR, 0);
-+ at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-+ at91_mci_write(host, ATMEL_PDC_TPR, 0);
-+ at91_mci_write(host, ATMEL_PDC_TCR, 0);
-+ at91_mci_write(host, ATMEL_PDC_TNPR, 0);
-+ at91_mci_write(host, ATMEL_PDC_TNCR, 0);
-
- at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
- at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-@@ -452,7 +428,7 @@
- /*
- * Disable the PDC controller
- */
-- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
-+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
- if (cmdr & AT91_MCI_TRCMD_START) {
- data->bytes_xfered = 0;
-@@ -474,15 +450,15 @@
- */
- host->total_length = block_length * blocks;
- host->buffer = dma_alloc_coherent(NULL,
-- host->total_length,
-- &host->physical_address, GFP_KERNEL);
-+ host->total_length,
-+ &host->physical_address, GFP_KERNEL);
-
- at91mci_sg_to_dma(host, data);
-
- pr_debug("Transmitting %d bytes\n", host->total_length);
-
-- at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
-- at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
-+ at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-+ at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
- ier = AT91_MCI_TXBUFE;
- }
- }
-@@ -497,9 +473,9 @@
-
- if (cmdr & AT91_MCI_TRCMD_START) {
- if (cmdr & AT91_MCI_TRDIR)
-- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
-+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
- else
-- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
-+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
- }
- return ier;
- }
-@@ -561,9 +537,7 @@
- pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
- status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
-- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
-- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
-- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
-+ if (status & AT91_MCI_ERRORS) {
- if ((status & AT91_MCI_RCRCE) &&
- ((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
- cmd->error = MMC_ERR_NONE;
-@@ -601,6 +575,32 @@
- }
-
- /*
-+ * Handle transmitted data
-+ */
-+static void at91_mci_handle_transmitted(struct at91mci_host *host)
-+{
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+
-+ pr_debug("Handling the transmit\n");
-+
-+ /* Disable the transfer */
-+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ /* Now wait for cmd ready */
-+ at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-+ at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-+
-+ cmd = host->cmd;
-+ if (!cmd) return;
-+
-+ data = cmd->data;
-+ if (!data) return;
-+
-+ data->bytes_xfered = host->total_length;
-+}
-+
-+/*
- * Set the IOS
- */
- static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-@@ -665,15 +665,15 @@
-
- int_status = at91_mci_read(host, AT91_MCI_SR);
- int_mask = at91_mci_read(host, AT91_MCI_IMR);
--
-+
- pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
- int_status & int_mask);
--
-+
- int_status = int_status & int_mask;
-
- if (int_status & AT91_MCI_ERRORS) {
- completed = 1;
--
-+
- if (int_status & AT91_MCI_UNRE)
- pr_debug("MMC: Underrun error\n");
- if (int_status & AT91_MCI_OVRE)
-@@ -821,7 +821,7 @@
- mmc->f_min = 375000;
- mmc->f_max = 25000000;
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-- mmc->caps = MMC_CAP_BYTEBLOCK;
-+ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
-
- host = mmc_priv(mmc);
- host->mmc = mmc;
-@@ -853,15 +853,15 @@
- host->baseaddr = ioremap(res->start, res->end - res->start + 1);
- if (!host->baseaddr) {
- clk_put(host->mci_clk);
-- mmc_free_host(mmc);
- release_mem_region(res->start, res->end - res->start + 1);
-+ mmc_free_host(mmc);
- return -ENOMEM;
- }
-
- /*
- * Reset hardware
- */
-- clk_enable(host->mci_clk); /* Enable the peripheral clock */
-+ clk_enable(host->mci_clk); /* Enable the peripheral clock */
- at91_mci_disable(host);
- at91_mci_enable(host);
-
-@@ -874,9 +874,9 @@
- printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
- clk_disable(host->mci_clk);
- clk_put(host->mci_clk);
-- mmc_free_host(mmc);
- iounmap(host->baseaddr);
- release_mem_region(res->start, res->end - res->start + 1);
-+ mmc_free_host(mmc);
- return ret;
- }
-
-@@ -930,13 +930,13 @@
- mmc_remove_host(mmc);
- free_irq(host->irq, host);
-
-- clk_disable(host->mci_clk); /* Disable the peripheral clock */
-- clk_put(host->mci_clk);
--
- iounmap(host->baseaddr);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start + 1);
-
-+ clk_disable(host->mci_clk); /* Disable the peripheral clock */
-+ clk_put(host->mci_clk);
-+
- mmc_free_host(mmc);
- platform_set_drvdata(pdev, NULL);
- pr_debug("MCI Removed\n");
-diff -urN linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.c linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.c
---- linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,1218 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/protocol.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "atmel-mci.h"
-+
-+#define DRIVER_NAME "atmel_mci"
-+
-+#define MCI_CMD_ERROR_FLAGS (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | \
-+ MCI_BIT(RCRCE) | MCI_BIT(RENDE) | \
-+ MCI_BIT(RTOE))
-+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
-+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
-+
-+enum {
-+ EVENT_CMD_COMPLETE = 0,
-+ EVENT_CMD_ERROR,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+ EVENT_STOP_SENT,
-+ EVENT_STOP_COMPLETE,
-+ EVENT_STOP_ERROR,
-+ EVENT_DMA_ERROR,
-+ EVENT_CARD_DETECT,
-+};
-+
-+struct atmel_mci_dma {
-+ struct dma_request_sg req;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+
-+struct atmel_mci {
-+ struct mmc_host *mmc;
-+ void __iomem *regs;
-+ struct atmel_mci_dma dma;
-+
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
-+
-+ u32 stop_cmdr;
-+ u32 stop_iflags;
-+
-+ struct tasklet_struct tasklet;
-+ unsigned long pending_events;
-+ unsigned long completed_events;
-+ u32 error_status;
-+
-+ int present;
-+ int detect_pin;
-+ int wp_pin;
-+
-+ unsigned long bus_hz;
-+ unsigned long mapbase;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+ struct dentry *debugfs_req;
-+ struct dentry *debugfs_pending_events;
-+ struct dentry *debugfs_completed_events;
-+#endif
-+};
-+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
-+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host) \
-+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_cmd_error_is_complete(host) \
-+ test_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_data_is_complete(host) \
-+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host) \
-+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host) \
-+ test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host) \
-+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_stop_error_is_complete(host) \
-+ test_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_dma_error_is_complete(host) \
-+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host) \
-+ test_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host) \
-+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host) \
-+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_cmd_error_complete(host) \
-+ set_bit(EVENT_CMD_ERROR, &host->completed_events)
-+#define mci_set_data_complete(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host) \
-+ set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_stop_error_complete(host) \
-+ set_bit(EVENT_STOP_ERROR, &host->completed_events)
-+#define mci_set_dma_error_complete(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->completed_events)
-+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_cmd_error_pending(host) \
-+ set_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_set_data_pending(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host) \
-+ set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_stop_error_pending(host) \
-+ set_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_set_dma_error_pending(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host) \
-+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_cmd_error_pending(host) \
-+ clear_bit(EVENT_CMD_ERROR, &host->pending_events)
-+#define mci_clear_data_pending(host) \
-+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host) \
-+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host) \
-+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host) \
-+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_stop_error_pending(host) \
-+ clear_bit(EVENT_STOP_ERROR, &host->pending_events)
-+#define mci_clear_dma_error_pending(host) \
-+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host) \
-+ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
-+
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+
-+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
-+
-+struct req_dbg_data {
-+ unsigned int nbytes;
-+ char str[DBG_REQ_BUF_SIZE];
-+};
-+
-+static int req_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd, *stop;
-+ struct mmc_data *data;
-+ struct req_dbg_data *priv;
-+ char *str;
-+ unsigned long n = 0;
-+
-+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ str = priv->str;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ mrq = host->mrq;
-+ if (mrq) {
-+ cmd = mrq->cmd;
-+ data = mrq->data;
-+ stop = mrq->stop;
-+ n = snprintf(str, DBG_REQ_BUF_SIZE,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ cmd->opcode, cmd->arg, cmd->flags,
-+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+ cmd->resp[3], cmd->error);
-+ if (n < DBG_REQ_BUF_SIZE && data)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "DATA %u * %u (%u) %x (err %u)\n",
-+ data->blocks, data->blksz,
-+ data->bytes_xfered, data->flags,
-+ data->error);
-+ if (n < DBG_REQ_BUF_SIZE && stop)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ stop->opcode, stop->arg, stop->flags,
-+ stop->resp[0], stop->resp[1],
-+ stop->resp[2], stop->resp[3],
-+ stop->error);
-+ }
-+ spin_unlock_irq(&host->mmc->lock);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+ file->private_data = priv;
-+
-+ return 0;
-+}
-+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct req_dbg_data *priv = file->private_data;
-+
-+ return simple_read_from_buffer(buf, nbytes, ppos,
-+ priv->str, priv->nbytes);
-+}
-+
-+static int req_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations req_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = req_dbg_open,
-+ .llseek = no_llseek,
-+ .read = req_dbg_read,
-+ .release = req_dbg_release,
-+};
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
-+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
-+
-+ spin_lock_irq(&host->mmc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(host->regs + i * 4);
-+ spin_unlock_irq(&host->mmc->lock);
-+
-+ file->private_data = data;
-+ ret = 0;
-+
-+out:
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
-+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+static const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
-+
-+static void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+ struct mmc_host *mmc;
-+ struct dentry *root, *regs;
-+ struct resource *res;
-+
-+ mmc = host->mmc;
-+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ host->debugfs_root = root;
-+
-+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+ regs->d_inode->i_size = res->end - res->start + 1;
-+ host->debugfs_regs = regs;
-+
-+ host->debugfs_req = debugfs_create_file("req", 0400, root,
-+ host, &req_dbg_fops);
-+ if (!host->debugfs_req)
-+ goto err_req;
-+
-+ host->debugfs_pending_events
-+ = debugfs_create_u32("pending_events", 0400, root,
-+ (u32 *)&host->pending_events);
-+ if (!host->debugfs_pending_events)
-+ goto err_pending_events;
-+
-+ host->debugfs_completed_events
-+ = debugfs_create_u32("completed_events", 0400, root,
-+ (u32 *)&host->completed_events);
-+ if (!host->debugfs_completed_events)
-+ goto err_completed_events;
-+
-+ return;
-+
-+err_completed_events:
-+ debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+ debugfs_remove(host->debugfs_req);
-+err_req:
-+ debugfs_remove(host->debugfs_regs);
-+err_regs:
-+ debugfs_remove(host->debugfs_root);
-+err_root:
-+ host->debugfs_root = NULL;
-+ dev_err(&host->pdev->dev,
-+ "failed to initialize debugfs for %s\n",
-+ mmc_hostname(mmc));
-+}
-+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+ if (host->debugfs_root) {
-+ debugfs_remove(host->debugfs_completed_events);
-+ debugfs_remove(host->debugfs_pending_events);
-+ debugfs_remove(host->debugfs_req);
-+ debugfs_remove(host->debugfs_regs);
-+ debugfs_remove(host->debugfs_root);
-+ host->debugfs_root = NULL;
-+ }
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+
-+}
-+#endif /* CONFIG_DEBUG_FS */
-+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+ unsigned int ns)
-+{
-+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
-+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+ struct mmc_data *data)
-+{
-+ static unsigned dtomul_to_shift[] = {
-+ 0, 4, 7, 8, 10, 12, 16, 20
-+ };
-+ unsigned timeout;
-+ unsigned dtocyc, dtomul;
-+
-+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
-+
-+ for (dtomul = 0; dtomul < 8; dtomul++) {
-+ unsigned shift = dtomul_to_shift[dtomul];
-+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+ if (dtocyc < 15)
-+ break;
-+ }
-+
-+ if (dtomul >= 8) {
-+ dtomul = 7;
-+ dtocyc = 15;
-+ }
-+
-+ pr_debug("%s: setting timeout to %u cycles\n",
-+ mmc_hostname(host->mmc),
-+ dtocyc << dtomul_to_shift[dtomul]);
-+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+ | MCI_BF(DTOCYC, dtocyc)));
-+}
-+
-+/*
-+ * Return mask with interrupt flags to be handled for this command.
-+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+ struct mmc_command *cmd,
-+ u32 *cmd_flags)
-+{
-+ u32 cmdr;
-+ u32 iflags;
-+
-+ cmd->error = MMC_ERR_NONE;
-+
-+ cmdr = 0;
-+ BUG_ON(MCI_BFEXT(CMDNB, cmdr) != 0);
-+ cmdr = MCI_BFINS(CMDNB, cmd->opcode, cmdr);
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ if (cmd->flags & MMC_RSP_136)
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+ else
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+ }
-+
-+ /*
-+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+ * it's too difficult to determine whether this is an ACMD or
-+ * not. Better make it 64.
-+ */
-+ cmdr |= MCI_BIT(MAXLAT);
-+
-+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+ cmdr |= MCI_BIT(OPDCMD);
-+
-+ iflags = MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS;
-+ if (!(cmd->flags & MMC_RSP_CRC))
-+ iflags &= ~MCI_BIT(RCRCE);
-+
-+ pr_debug("%s: cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+ mmc_hostname(mmc), cmd->opcode, cmd->arg, cmd->flags,
-+ (unsigned long)cmdr);
-+
-+ *cmd_flags = cmdr;
-+ return iflags;
-+}
-+
-+static void atmci_start_command(struct atmel_mci *host,
-+ struct mmc_command *cmd,
-+ u32 cmd_flags)
-+{
-+ WARN_ON(host->cmd);
-+ host->cmd = cmd;
-+
-+ mci_writel(host, ARGR, cmd->arg);
-+ mci_writel(host, CMDR, cmd_flags);
-+
-+ if (cmd->data)
-+ dma_start_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 cmd_flags;
-+
-+ WARN_ON(host->data);
-+ host->data = data;
-+
-+ atmci_set_timeout(host, data);
-+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+ | MCI_BF(BLKLEN, data->blksz)));
-+ host->dma.req.block_size = data->blksz;
-+ host->dma.req.nr_blocks = data->blocks;
-+
-+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+ if (data->flags & MMC_DATA_STREAM)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else if (data->blocks > 1)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ else
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ cmd_flags |= MCI_BIT(TRDIR);
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_FROM_DEVICE);
-+ host->dma.req.periph_id = host->dma.rx_periph_id;
-+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+ } else {
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_TO_DEVICE);
-+ host->dma.req.periph_id = host->dma.tx_periph_id;
-+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+ }
-+ host->dma.req.sg = data->sg;
-+
-+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+ return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = mrq->data;
-+ u32 iflags;
-+ u32 cmdflags = 0;
-+
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ printk("WARNING: IMR=0x%08x\n", mci_readl(host, IMR));
-+
-+ WARN_ON(host->mrq != NULL);
-+ host->mrq = mrq;
-+ host->pending_events = 0;
-+ host->completed_events = 0;
-+
-+ iflags = atmci_prepare_command(mmc, mrq->cmd, &cmdflags);
-+
-+ if (mrq->stop) {
-+ BUG_ON(!data);
-+
-+ host->stop_iflags = atmci_prepare_command(mmc, mrq->stop,
-+ &host->stop_cmdr);
-+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ host->stop_cmdr |= MCI_BIT(TRDIR);
-+ if (data->flags & MMC_DATA_STREAM)
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ }
-+ if (data) {
-+ cmdflags |= atmci_prepare_data(mmc, data);
-+ iflags |= MCI_DATA_ERROR_FLAGS;
-+ }
-+
-+ atmci_start_command(host, mrq->cmd, cmdflags);
-+ mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (ios->clock) {
-+ u32 clkdiv;
-+
-+ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+ if (clkdiv > 255)
-+ clkdiv = 255;
-+ mci_writel(host, MR, (clkdiv
-+ | MCI_BIT(WRPROOF)
-+ | MCI_BIT(RDPROOF)));
-+ }
-+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, SDCR, 0);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+ break;
-+ }
-+
-+ switch (ios->power_mode) {
-+ case MMC_POWER_OFF:
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ break;
-+ case MMC_POWER_UP:
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ break;
-+ case MMC_POWER_ON:
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ break;
-+ }
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+ int read_only = 0;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (host->wp_pin >= 0) {
-+ read_only = gpio_get_value(host->wp_pin);
-+ pr_debug("%s: card is %s\n", mmc_hostname(mmc),
-+ read_only ? "read-only" : "read-write");
-+ } else {
-+ pr_debug("%s: no pin for checking read-only switch."
-+ " Assuming write-enable.\n", mmc_hostname(mmc));
-+ }
-+
-+ return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+ .request = atmci_request,
-+ .set_ios = atmci_set_ios,
-+ .get_ro = atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ WARN_ON(host->cmd || host->data);
-+ host->mrq = NULL;
-+
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+ u32 flags)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+ mci_writel(host, IER, host->stop_iflags);
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ host->data = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+
-+ /*
-+ * Data might complete before command for very short transfers
-+ * (like READ_SCR)
-+ */
-+ if (mci_cmd_is_complete(host)
-+ && (!data->stop || mci_stop_is_complete(host)))
-+ atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_error(struct mmc_host *mmc,
-+ struct mmc_command *cmd,
-+ u32 status)
-+{
-+ pr_debug("%s: command error: status=0x%08x\n",
-+ mmc_hostname(mmc), status);
-+
-+ if (status & MCI_BIT(RTOE))
-+ cmd->error = MMC_ERR_TIMEOUT;
-+ else if (status & MCI_BIT(RCRCE))
-+ cmd->error = MMC_ERR_BADCRC;
-+ else
-+ cmd->error = MMC_ERR_FAILED;
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+ struct mmc_host *mmc = (struct mmc_host *)priv;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_request *mrq = host->mrq;
-+ struct mmc_data *data = host->data;
-+
-+ pr_debug("atmci_tasklet: pending/completed/mask %lx/%lx/%x\n",
-+ host->pending_events, host->completed_events,
-+ mci_readl(host, IMR));
-+
-+ if (mci_clear_cmd_error_is_pending(host)) {
-+ struct mmc_command *cmd;
-+
-+ mci_set_cmd_error_complete(host);
-+ mci_clear_cmd_pending(host);
-+ cmd = host->mrq->cmd;
-+
-+ if (cmd->data) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data = NULL;
-+ }
-+
-+ atmci_command_error(mmc, cmd, host->error_status);
-+ atmci_request_end(mmc, cmd->mrq);
-+ }
-+ if (mci_clear_stop_error_is_pending(host)) {
-+ mci_set_stop_error_complete(host);
-+ mci_clear_stop_pending(host);
-+ atmci_command_error(mmc, host->mrq->stop,
-+ host->error_status);
-+ if (!host->data)
-+ atmci_request_end(mmc, host->mrq);
-+ }
-+ if (mci_clear_cmd_is_pending(host)) {
-+ mci_set_cmd_complete(host);
-+ if (!mrq->data || mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_stop_is_pending(host)) {
-+ mci_set_stop_complete(host);
-+ if (mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_dma_error_is_pending(host)) {
-+ mci_set_dma_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ /* DMA controller got bus error => invalid address */
-+ data->error = MMC_ERR_INVALID;
-+
-+ printk(KERN_DEBUG "%s: dma error after %u bytes xfered\n",
-+ mmc_hostname(mmc), host->data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_error_is_pending(host)) {
-+ u32 status = host->error_status;
-+
-+ mci_set_data_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ printk(KERN_DEBUG "%s: data error: status=0x%08x\n",
-+ mmc_hostname(host->mmc), status);
-+
-+ if (status & MCI_BIT(DCRCE)) {
-+ printk(KERN_DEBUG "%s: Data CRC error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_BADCRC;
-+ } else if (status & MCI_BIT(DTOE)) {
-+ printk(KERN_DEBUG "%s: Data Timeout error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_TIMEOUT;
-+ } else {
-+ printk(KERN_DEBUG "%s: Data FIFO error\n",
-+ mmc_hostname(host->mmc));
-+ data->error = MMC_ERR_FIFO;
-+ }
-+ printk(KERN_DEBUG "%s: Bytes xfered: %u\n",
-+ mmc_hostname(host->mmc), data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_is_pending(host)) {
-+ mci_set_data_complete(host);
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_card_detect_is_pending(host)) {
-+ /* Reset controller if card is gone */
-+ if (!host->present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
-+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host)
-+ && !mci_cmd_error_is_complete(host)) {
-+ mrq->cmd->error = MMC_ERR_TIMEOUT;
-+ }
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = MMC_ERR_TIMEOUT;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host)
-+ && !mci_stop_error_is_complete(host)) {
-+ mrq->stop->error = MMC_ERR_TIMEOUT;
-+ }
-+
-+ host->cmd = NULL;
-+ atmci_request_end(mmc, mrq);
-+ }
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+ }
-+}
-+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = host->cmd;
-+
-+ /*
-+ * Read the response now so that we're free to send a new
-+ * command immediately.
-+ */
-+ cmd->resp[0] = mci_readl(host, RSPR);
-+ cmd->resp[1] = mci_readl(host, RSPR);
-+ cmd->resp[2] = mci_readl(host, RSPR);
-+ cmd->resp[3] = mci_readl(host, RSPR);
-+
-+ mci_writel(host, IDR, MCI_BIT(CMDRDY) | MCI_CMD_ERROR_FLAGS);
-+ host->cmd = NULL;
-+
-+ if (mci_stop_sent_is_complete(host))
-+ mci_set_stop_pending(host);
-+ else
-+ mci_set_cmd_pending(host);
-+
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+ struct mmc_data *data;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+ data = host->data;
-+
-+ if (data->stop && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ mci_writel(host, IDR, MCI_DATA_ERROR_FLAGS);
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ } else {
-+ /*
-+ * For the WRITE case, wait for NOTBUSY. This function
-+ * is called when everything has been written to the
-+ * controller, not when the card is done programming.
-+ */
-+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
-+ }
-+}
-+
-+static void atmci_dma_error(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+
-+ mci_set_dma_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+}
-+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 status, mask, pending;
-+
-+ spin_lock(&mmc->lock);
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+
-+ do {
-+ if (pending & MCI_CMD_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(CMDRDY)
-+ | MCI_BIT(NOTBUSY)
-+ | MCI_CMD_ERROR_FLAGS
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->error_status = status;
-+ host->cmd = NULL;
-+ if (mci_stop_sent_is_complete(host))
-+ mci_set_stop_error_pending(host);
-+ else
-+ mci_set_cmd_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_DATA_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->error_status = status;
-+ mci_set_data_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_BIT(CMDRDY))
-+ atmci_cmd_interrupt(mmc, status);
-+ if (pending & MCI_BIT(NOTBUSY)) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+ } while (pending);
-+
-+ spin_unlock(&mmc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ int present = !gpio_get_value(irq_to_gpio(irq));
-+
-+ if (present != host->present) {
-+ pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+ mci_set_card_detect_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+ struct mci_platform_data *board;
-+ struct atmel_mci *host;
-+ struct mmc_host *mmc;
-+ struct resource *regs;
-+ int irq;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ board = pdev->dev.platform_data;
-+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+ if (!mmc)
-+ return -ENOMEM;
-+
-+ host = mmc_priv(mmc);
-+ host->pdev = pdev;
-+ host->mmc = mmc;
-+ if (board) {
-+ host->detect_pin = board->detect_pin;
-+ host->wp_pin = board->wp_pin;
-+ } else {
-+ host->detect_pin = -1;
-+ host->detect_pin = -1;
-+ }
-+
-+ host->mck = clk_get(&pdev->dev, "mci_clk");
-+ if (IS_ERR(host->mck)) {
-+ ret = PTR_ERR(host->mck);
-+ goto out_free_host;
-+ }
-+ clk_enable(host->mck);
-+
-+ ret = -ENOMEM;
-+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!host->regs)
-+ goto out_disable_clk;
-+
-+ host->bus_hz = clk_get_rate(host->mck);
-+ host->mapbase = regs->start;
-+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = (host->bus_hz + 511) / 512;
-+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+ mmc->ocr_avail = 0x00100000;
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
-+
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
-+
-+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+ if (ret)
-+ goto out_unmap;
-+
-+ /* Assume card is present if we don't have a detect pin */
-+ host->present = 1;
-+ if (host->detect_pin >= 0) {
-+ if (gpio_request(host->detect_pin, "mmc_detect")) {
-+ printk(KERN_WARNING "%s: no detect pin available\n",
-+ mmc_hostname(host->mmc));
-+ host->detect_pin = -1;
-+ } else {
-+ host->present = !gpio_get_value(host->detect_pin);
-+ }
-+ }
-+ if (host->wp_pin >= 0) {
-+ if (gpio_request(host->wp_pin, "mmc_wp")) {
-+ printk(KERN_WARNING "%s: no WP pin available\n",
-+ mmc_hostname(host->mmc));
-+ host->wp_pin = -1;
-+ }
-+ }
-+
-+ /* TODO: Get this information from platform data */
-+ ret = -ENOMEM;
-+ host->dma.req.req.dmac = find_dma_controller(0);
-+ if (!host->dma.req.req.dmac) {
-+ printk(KERN_ERR
-+ "mmci: No DMA controller available, aborting\n");
-+ goto out_free_irq;
-+ }
-+ ret = dma_alloc_channel(host->dma.req.req.dmac);
-+ if (ret < 0) {
-+ printk(KERN_ERR
-+ "mmci: Unable to allocate DMA channel, aborting\n");
-+ goto out_free_irq;
-+ }
-+ host->dma.req.req.channel = ret;
-+ host->dma.req.width = DMA_WIDTH_32BIT;
-+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+ host->dma.req.req.error = atmci_dma_error;
-+ host->dma.rx_periph_id = 0;
-+ host->dma.tx_periph_id = 1;
-+
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+
-+ platform_set_drvdata(pdev, host);
-+
-+ mmc_add_host(mmc);
-+
-+ if (host->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(host->detect_pin),
-+ atmci_detect_change,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ DRIVER_NAME, mmc);
-+ if (ret) {
-+ printk(KERN_ERR
-+ "%s: could not request IRQ %d for detect pin\n",
-+ mmc_hostname(mmc),
-+ gpio_to_irq(host->detect_pin));
-+ gpio_free(host->detect_pin);
-+ host->detect_pin = -1;
-+ }
-+ }
-+
-+ printk(KERN_INFO "%s: Atmel MCI controller at 0x%08lx irq %d\n",
-+ mmc_hostname(mmc), host->mapbase, irq);
-+
-+ atmci_init_debugfs(host);
-+
-+ return 0;
-+
-+out_free_irq:
-+ if (host->detect_pin >= 0)
-+ gpio_free(host->detect_pin);
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+ free_irq(irq, mmc);
-+out_unmap:
-+ iounmap(host->regs);
-+out_disable_clk:
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+out_free_host:
-+ mmc_free_host(mmc);
-+ return ret;
-+}
-+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (host) {
-+ atmci_cleanup_debugfs(host);
-+
-+ if (host->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+ cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(host->detect_pin);
-+ }
-+
-+ mmc_remove_host(host->mmc);
-+
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ mci_readl(host, SR);
-+
-+ dma_release_channel(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+
-+ free_irq(platform_get_irq(pdev, 0), host->mmc);
-+ iounmap(host->regs);
-+
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+
-+ mmc_free_host(host->mmc);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+ .probe = atmci_probe,
-+ .remove = __devexit_p(atmci_remove),
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ },
-+};
-+
-+static int __init atmci_init(void)
-+{
-+ return platform_driver_register(&atmci_driver);
-+}
-+
-+static void __exit atmci_exit(void)
-+{
-+ platform_driver_unregister(&atmci_driver);
-+}
-+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.h linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.h
---- linux-2.6.20.4-0rig/drivers/mmc/atmel-mci.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mmc/atmel-mci.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,192 @@
-+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR 0x0000
-+#define MCI_MR 0x0004
-+#define MCI_DTOR 0x0008
-+#define MCI_SDCR 0x000c
-+#define MCI_ARGR 0x0010
-+#define MCI_CMDR 0x0014
-+#define MCI_BLKR 0x0018
-+#define MCI_RSPR 0x0020
-+#define MCI_RSPR1 0x0024
-+#define MCI_RSPR2 0x0028
-+#define MCI_RSPR3 0x002c
-+#define MCI_RDR 0x0030
-+#define MCI_TDR 0x0034
-+#define MCI_SR 0x0040
-+#define MCI_IER 0x0044
-+#define MCI_IDR 0x0048
-+#define MCI_IMR 0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET 0
-+#define MCI_MCIEN_SIZE 1
-+#define MCI_MCIDIS_OFFSET 1
-+#define MCI_MCIDIS_SIZE 1
-+#define MCI_PWSEN_OFFSET 2
-+#define MCI_PWSEN_SIZE 1
-+#define MCI_PWSDIS_OFFSET 3
-+#define MCI_PWSDIS_SIZE 1
-+#define MCI_SWRST_OFFSET 7
-+#define MCI_SWRST_SIZE 1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET 0
-+#define MCI_CLKDIV_SIZE 8
-+#define MCI_PWSDIV_OFFSET 8
-+#define MCI_PWSDIV_SIZE 3
-+#define MCI_RDPROOF_OFFSET 11
-+#define MCI_RDPROOF_SIZE 1
-+#define MCI_WRPROOF_OFFSET 12
-+#define MCI_WRPROOF_SIZE 1
-+#define MCI_DMAPADV_OFFSET 14
-+#define MCI_DMAPADV_SIZE 1
-+#define MCI_BLKLEN_OFFSET 16
-+#define MCI_BLKLEN_SIZE 16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET 0
-+#define MCI_DTOCYC_SIZE 4
-+#define MCI_DTOMUL_OFFSET 4
-+#define MCI_DTOMUL_SIZE 3
-+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET 0
-+#define MCI_SDCSEL_SIZE 4
-+#define MCI_SDCBUS_OFFSET 7
-+#define MCI_SDCBUS_SIZE 1
-+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET 0
-+#define MCI_ARG_SIZE 32
-+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET 0
-+#define MCI_CMDNB_SIZE 6
-+#define MCI_RSPTYP_OFFSET 6
-+#define MCI_RSPTYP_SIZE 2
-+#define MCI_SPCMD_OFFSET 8
-+#define MCI_SPCMD_SIZE 3
-+#define MCI_OPDCMD_OFFSET 11
-+#define MCI_OPDCMD_SIZE 1
-+#define MCI_MAXLAT_OFFSET 12
-+#define MCI_MAXLAT_SIZE 1
-+#define MCI_TRCMD_OFFSET 16
-+#define MCI_TRCMD_SIZE 2
-+#define MCI_TRDIR_OFFSET 18
-+#define MCI_TRDIR_SIZE 1
-+#define MCI_TRTYP_OFFSET 19
-+#define MCI_TRTYP_SIZE 2
-+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET 0
-+#define MCI_BCNT_SIZE 16
-+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET 0
-+#define MCI_RSP_SIZE 32
-+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET 0
-+#define MCI_CMDRDY_SIZE 1
-+#define MCI_RXRDY_OFFSET 1
-+#define MCI_RXRDY_SIZE 1
-+#define MCI_TXRDY_OFFSET 2
-+#define MCI_TXRDY_SIZE 1
-+#define MCI_BLKE_OFFSET 3
-+#define MCI_BLKE_SIZE 1
-+#define MCI_DTIP_OFFSET 4
-+#define MCI_DTIP_SIZE 1
-+#define MCI_NOTBUSY_OFFSET 5
-+#define MCI_NOTBUSY_SIZE 1
-+#define MCI_ENDRX_OFFSET 6
-+#define MCI_ENDRX_SIZE 1
-+#define MCI_ENDTX_OFFSET 7
-+#define MCI_ENDTX_SIZE 1
-+#define MCI_RXBUFF_OFFSET 14
-+#define MCI_RXBUFF_SIZE 1
-+#define MCI_TXBUFE_OFFSET 15
-+#define MCI_TXBUFE_SIZE 1
-+#define MCI_RINDE_OFFSET 16
-+#define MCI_RINDE_SIZE 1
-+#define MCI_RDIRE_OFFSET 17
-+#define MCI_RDIRE_SIZE 1
-+#define MCI_RCRCE_OFFSET 18
-+#define MCI_RCRCE_SIZE 1
-+#define MCI_RENDE_OFFSET 19
-+#define MCI_RENDE_SIZE 1
-+#define MCI_RTOE_OFFSET 20
-+#define MCI_RTOE_SIZE 1
-+#define MCI_DCRCE_OFFSET 21
-+#define MCI_DCRCE_SIZE 1
-+#define MCI_DTOE_OFFSET 22
-+#define MCI_DTOE_SIZE 1
-+#define MCI_OVRE_OFFSET 30
-+#define MCI_OVRE_SIZE 1
-+#define MCI_UNRE_OFFSET 31
-+#define MCI_UNRE_SIZE 1
-+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE 0
-+#define MCI_DTOMUL_16_CYCLES 1
-+#define MCI_DTOMUL_128_CYCLES 2
-+#define MCI_DTOMUL_256_CYCLES 3
-+#define MCI_DTOMUL_1024_CYCLES 4
-+#define MCI_DTOMUL_4096_CYCLES 5
-+#define MCI_DTOMUL_65536_CYCLES 6
-+#define MCI_DTOMUL_1048576_CYCLES 7
-+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP 0
-+#define MCI_RSPTYP_48_BIT 1
-+#define MCI_RSPTYP_136_BIT 2
-+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD 0
-+#define MCI_SPCMD_INIT_CMD 1
-+#define MCI_SPCMD_SYNC_CMD 2
-+#define MCI_SPCMD_INT_CMD 4
-+#define MCI_SPCMD_INT_RESP 5
-+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS 0
-+#define MCI_TRCMD_START_TRANS 1
-+#define MCI_TRCMD_STOP_TRANS 2
-+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK 0
-+#define MCI_TRTYP_MULTI_BLOCK 1
-+#define MCI_TRTYP_STREAM 2
-+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name) \
-+ (1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value) \
-+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
-+ << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value) \
-+ (((value) >> MCI_##name##_OFFSET) \
-+ & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
-+ << MCI_##name##_OFFSET)) \
-+ | MCI_BF(name,value))
-+
-+/* Register access macros */
-+#define mci_readl(port,reg) \
-+ __raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + MCI_##reg)
-+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff -urN linux-2.6.20.4-0rig/drivers/mmc/Kconfig linux-2.6.20.4-atmel/drivers/mmc/Kconfig
---- linux-2.6.20.4-0rig/drivers/mmc/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mmc/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -71,6 +71,16 @@
-
- If unsure, say N.
-
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
-+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
-+
-+ If unsure, say N.
-+
- config MMC_WBSD
- tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on MMC && ISA_DMA_API
-diff -urN linux-2.6.20.4-0rig/drivers/mmc/Makefile linux-2.6.20.4-atmel/drivers/mmc/Makefile
---- linux-2.6.20.4-0rig/drivers/mmc/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mmc/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -23,6 +23,7 @@
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
-
- mmc_core-y := mmc.o mmc_sysfs.o
-diff -urN linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0001.c linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0001.c
---- linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0001.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0001.c 2007-03-24 16:42:29.000000000 +0100
-@@ -47,6 +47,7 @@
- #define I82802AC 0x00ac
- #define MANUFACTURER_ST 0x0020
- #define M50LPW080 0x002F
-+#define AT49BV640D 0x02de
-
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -153,6 +154,47 @@
- }
- #endif
-
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+ struct cfi_pri_atmel atmel_pri;
-+ uint32_t features = 0;
-+
-+ /* Reverse byteswapping */
-+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+ if (atmel_pri.Features & 0x01) /* chip erase supported */
-+ features |= (1<<0);
-+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+ features |= (1<<1);
-+ if (atmel_pri.Features & 0x04) /* program suspend supported */
-+ features |= (1<<2);
-+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+ features |= (1<<9);
-+ if (atmel_pri.Features & 0x20) /* page mode read supported */
-+ features |= (1<<7);
-+ if (atmel_pri.Features & 0x40) /* queued erase supported */
-+ features |= (1<<4);
-+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+ features |= (1<<6);
-+
-+ extp->FeatureSupport = features;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -221,6 +263,7 @@
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff -urN linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.6.20.4-0rig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mtd/chips/cfi_cmdset_0002.c 2007-03-24 16:42:29.000000000 +0100
-@@ -185,6 +185,10 @@
- extp->TopBottom = 2;
- else
- extp->TopBottom = 3;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
- }
-
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@
- #if !FORCE_WORD_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/at91_dataflash.c linux-2.6.20.4-atmel/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.20.4-0rig/drivers/mtd/devices/at91_dataflash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mtd/devices/at91_dataflash.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,640 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
-+#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */
-+
-+#define OP_READ_CONTINUOUS 0xE8
-+#define OP_READ_PAGE 0xD2
-+#define OP_READ_BUFFER1 0xD4
-+#define OP_READ_BUFFER2 0xD6
-+#define OP_READ_STATUS 0xD7
-+
-+#define OP_ERASE_PAGE 0x81
-+#define OP_ERASE_BLOCK 0x50
-+
-+#define OP_TRANSFER_BUF1 0x53
-+#define OP_TRANSFER_BUF2 0x55
-+#define OP_COMPARE_BUF1 0x60
-+#define OP_COMPARE_BUF2 0x61
-+
-+#define OP_PROGRAM_VIA_BUF1 0x82
-+#define OP_PROGRAM_VIA_BUF2 0x85
-+
-+struct dataflash_local
-+{
-+ int spi; /* SPI chip-select number */
-+
-+ unsigned int page_size; /* number of bytes per page */
-+ unsigned short page_offset; /* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 6 * 32 * 8 * 528, /* 6 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
-+ }
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 4 * 64 * 8 * 528, /* 4 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
-+ }
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ name: "romboot",
-+ offset: 0,
-+ size: 16 * 1056, /* 160 Kb */
-+ mask_flags: MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ name: "uboot",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 128 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "kernel",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 1024 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "filesystem",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
-+ }
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
-+ SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+ If this is not valid, then either (i) each dataflash 'priv' structure
-+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+ another mechanism. */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+ struct spi_transfer_list* list = spi_transfer_desc;
-+
-+ list->tx[0] = tx; list->txlen[0] = tx_len;
-+ list->rx[0] = rx; list->rxlen[0] = rx_len;
-+
-+ list->tx[1] = txnext; list->txlen[1] = txnext_len;
-+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
-+
-+ list->nr_transfers = nr;
-+
-+ return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return;
-+
-+ do {
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ } while ((command[1] & 0x80) == 0);
-+
-+ kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+ unsigned short status;
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return 0;
-+
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ status = command[1];
-+
-+ kfree(command);
-+ return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+ /* Sanity checks */
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+ return -EINVAL;
-+ if ((instr->addr % priv->page_size) != 0)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ while (instr->len > 0) {
-+ /* Calculate flash page address */
-+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+ command[0] = OP_ERASE_PAGE;
-+ command[1] = (pageaddr & 0x00FF0000) >> 16;
-+ command[2] = (pageaddr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+ at91_dataflash_waitready(); /* poll status until ready */
-+ spi_release_bus(priv->spi);
-+
-+ instr->addr += priv->page_size; /* next page */
-+ instr->len -= priv->page_size;
-+ }
-+
-+ kfree(command);
-+
-+ /* Inform MTD subsystem that erase is complete */
-+ instr->state = MTD_ERASE_DONE;
-+ if (instr->callback)
-+ instr->callback(instr);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ * from : Start offset in flash device
-+ * len : Amount to read
-+ * retlen : About of data actually read
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int addr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ /* Calculate flash page/byte address */
-+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+ command = kmalloc(8, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ command[0] = OP_READ_CONTINUOUS;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+ spi_release_bus(priv->spi);
-+
-+ *retlen = len;
-+ kfree(command);
-+ return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ * to : Start offset in flash device
-+ * len : Amount to write
-+ * retlen : Amount of data actually written
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr, addr, offset, writelen;
-+ size_t remaining;
-+ u_char *writebuf;
-+ unsigned short status;
-+ int res = 0;
-+ char* command;
-+ char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ pageaddr = ((unsigned)to / priv->page_size);
-+ offset = ((unsigned)to % priv->page_size);
-+ if (offset + len > priv->page_size)
-+ writelen = priv->page_size - offset;
-+ else
-+ writelen = len;
-+ writebuf = (u_char *)buf;
-+ remaining = len;
-+
-+ /* Allocate temporary buffer */
-+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+ if (!tmpbuf) {
-+ kfree(command);
-+ return -ENOMEM;
-+ }
-+
-+ /* Gain access to the SPI bus */
-+ spi_access_bus(priv->spi);
-+
-+ while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+ /* (1) Transfer to Buffer1 */
-+ if (writelen != priv->page_size) {
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_TRANSFER_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+ }
-+
-+ /* (2) Program via Buffer1 */
-+ addr = (pageaddr << priv->page_offset) + offset;
-+ command[0] = OP_PROGRAM_VIA_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+ at91_dataflash_waitready();
-+
-+ /* (3) Compare to Buffer1 */
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_COMPARE_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+
-+ /* Get result of the compare operation */
-+ status = at91_dataflash_status();
-+ if ((status & 0x40) == 1) {
-+ printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+ remaining = 0;
-+ res = -EIO;
-+ }
-+
-+ remaining = remaining - writelen;
-+ pageaddr++;
-+ offset = 0;
-+ writebuf += writelen;
-+ *retlen += writelen;
-+
-+ if (remaining > priv->page_size)
-+ writelen = priv->page_size;
-+ else
-+ writelen = remaining;
-+ }
-+
-+ /* Release SPI bus */
-+ spi_release_bus(priv->spi);
-+
-+ kfree(tmpbuf);
-+ kfree(command);
-+ return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+ int nr_pages, int pagesize, int pageoffset)
-+{
-+ struct mtd_info *device;
-+ struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *mtd_parts = 0;
-+ int mtd_parts_nr = 0;
-+#endif
-+
-+ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+ return 0;
-+ }
-+
-+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+ if (!device)
-+ return -ENOMEM;
-+ memset(device, 0, sizeof(struct mtd_info));
-+
-+ device->name = (char *)&device[1];
-+ sprintf(device->name, "%s.spi%d", name, channel);
-+ device->size = nr_pages * pagesize;
-+ device->erasesize = pagesize;
-+ device->writesize = pagesize;
-+ device->owner = THIS_MODULE;
-+ device->type = MTD_DATAFLASH;
-+ device->flags = MTD_WRITEABLE;
-+ device->erase = at91_dataflash_erase;
-+ device->read = at91_dataflash_read;
-+ device->write = at91_dataflash_write;
-+
-+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+ if (!priv) {
-+ kfree(device);
-+ return -ENOMEM;
-+ }
-+ memset(priv, 0, sizeof(struct dataflash_local));
-+
-+ priv->spi = channel;
-+ priv->page_size = pagesize;
-+ priv->page_offset = pageoffset;
-+ device->priv = priv;
-+
-+ mtd_devices[nr_devices] = device;
-+ nr_devices++;
-+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+ if (mtd_parts_nr <= 0) {
-+ switch (IDsize) {
-+ case SZ_2M:
-+ mtd_parts = static_partitions_2M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+ break;
-+ case SZ_4M:
-+ mtd_parts = static_partitions_4M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+ break;
-+ case SZ_8M:
-+ mtd_parts = static_partitions_8M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+ break;
-+ }
-+ }
-+
-+ if (mtd_parts_nr > 0) {
-+#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
-+ add_mtd_device(device);
-+#endif
-+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+ }
-+#endif
-+ return add_mtd_device(device); /* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ * Device Density ID code Nr Pages Page Size Page offset
-+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
-+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
-+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
-+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
-+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
-+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
-+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
-+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+ int res = 0;
-+ unsigned short status;
-+
-+ spi_access_bus(channel);
-+ status = at91_dataflash_status();
-+ spi_release_bus(channel);
-+ if (status != 0xff) { /* no dataflash device there */
-+ switch (status & 0x3c) {
-+ case 0x0c: /* 0 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+ break;
-+ case 0x14: /* 0 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+ break;
-+ case 0x1c: /* 0 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+ break;
-+ case 0x24: /* 1 0 0 1 */
-+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+ break;
-+ case 0x2c: /* 1 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+ break;
-+ case 0x34: /* 1 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+ break;
-+ case 0x3c: /* 1 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+ break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+// case 0x10: /* 0 1 0 0 */
-+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+// break;
-+ default:
-+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+ }
-+ }
-+
-+ return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!spi_transfer_desc)
-+ return -ENOMEM;
-+
-+ /* DataFlash (SPI chip select 0) */
-+ at91_dataflash_detect(0);
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card (SPI chip select 3) */
-+ at91_dataflash_detect(3);
-+#endif
-+
-+ return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+ if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+ del_mtd_partitions(mtd_devices[i]);
-+#else
-+ del_mtd_device(mtd_devices[i]);
-+#endif
-+ kfree(mtd_devices[i]->priv);
-+ kfree(mtd_devices[i]);
-+ }
-+ }
-+ nr_devices = 0;
-+ kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/Kconfig linux-2.6.20.4-atmel/drivers/mtd/devices/Kconfig
---- linux-2.6.20.4-0rig/drivers/mtd/devices/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mtd/devices/Kconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -267,5 +267,11 @@
- LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- you have managed to wipe the first block.
-
--endmenu
-+config MTD_AT91_DATAFLASH
-+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+ help
-+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+ If you have such a board, say 'Y'.
-
-+endmenu
-diff -urN linux-2.6.20.4-0rig/drivers/mtd/devices/Makefile linux-2.6.20.4-atmel/drivers/mtd/devices/Makefile
---- linux-2.6.20.4-0rig/drivers/mtd/devices/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mtd/devices/Makefile 2007-03-24 16:39:15.000000000 +0100
-@@ -17,3 +17,4 @@
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN linux-2.6.20.4-0rig/drivers/mtd/nand/at91_nand.c linux-2.6.20.4-atmel/drivers/mtd/nand/at91_nand.c
---- linux-2.6.20.4-0rig/drivers/mtd/nand/at91_nand.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/mtd/nand/at91_nand.c 2007-03-24 16:39:15.000000000 +0100
-@@ -82,6 +82,10 @@
- at91_set_gpio_value(host->board->enable_pin, 1);
- }
-
-+#ifdef CONFIG_MTD_PARTITIONS
-+const char *part_probes[] = { "cmdlinepart", NULL };
-+#endif
-+
- /*
- * Probe for the NAND device.
- */
-@@ -151,6 +155,12 @@
- #ifdef CONFIG_MTD_PARTITIONS
- if (host->board->partition_info)
- partitions = host->board->partition_info(mtd->size, &num_partitions);
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ else {
-+ mtd->name = "at91_nand";
-+ num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-+ }
-+#endif
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-diff -urN linux-2.6.20.4-0rig/drivers/net/arm/at91_ether.c linux-2.6.20.4-atmel/drivers/net/arm/at91_ether.c
---- linux-2.6.20.4-0rig/drivers/net/arm/at91_ether.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/net/arm/at91_ether.c 2007-03-24 16:39:15.000000000 +0100
-@@ -943,14 +943,22 @@
- struct net_device *dev;
- struct at91_private *lp;
- unsigned int val;
-- int res;
-+ struct resource *res;
-+ int ret;
-
- dev = alloc_etherdev(sizeof(struct at91_private));
- if (!dev)
- return -ENOMEM;
-
-- dev->base_addr = AT91_VA_BASE_EMAC;
-- dev->irq = AT91RM9200_ID_EMAC;
-+ /* Get I/O base address and IRQ */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ free_netdev(dev);
-+ return -ENODEV;
-+ }
-+ dev->base_addr = res->start;
-+ dev->irq = platform_get_irq(pdev, 0);
-+
- SET_MODULE_OWNER(dev);
-
- /* Install the interrupt handler */
-@@ -1023,12 +1031,12 @@
- lp->phy_address = phy_address; /* MDI address of PHY */
-
- /* Register the network interface */
-- res = register_netdev(dev);
-- if (res) {
-+ ret = register_netdev(dev);
-+ if (ret) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-- return res;
-+ return ret;
- }
-
- /* Determine current link speed */
-@@ -1103,7 +1111,7 @@
- case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
- case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
- case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
-- case MII_DP83847_ID: /* National Semiconductor DP83847: */
-+ case MII_DP83847_ID: /* National Semiconductor DP83847: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
- detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
-diff -urN linux-2.6.20.4-0rig/drivers/net/Kconfig linux-2.6.20.4-atmel/drivers/net/Kconfig
---- linux-2.6.20.4-0rig/drivers/net/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/net/Kconfig 2007-03-24 16:39:15.000000000 +0100
-@@ -190,7 +190,7 @@
-
- config MACB
- tristate "Atmel MACB support"
-- depends on NET_ETHERNET && AVR32
-+ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
- select MII
- help
- The Atmel MACB ethernet interface is found on many AT32 and AT91
-diff -urN linux-2.6.20.4-0rig/drivers/net/macb.c linux-2.6.20.4-atmel/drivers/net/macb.c
---- linux-2.6.20.4-0rig/drivers/net/macb.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/net/macb.c 2007-03-24 16:42:28.000000000 +0100
-@@ -883,27 +883,15 @@
- static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct macb *bp = netdev_priv(dev);
-- int ret;
-- unsigned long flags;
--
-- spin_lock_irqsave(&bp->lock, flags);
-- ret = mii_ethtool_gset(&bp->mii, cmd);
-- spin_unlock_irqrestore(&bp->lock, flags);
-
-- return ret;
-+ return mii_ethtool_gset(&bp->mii, cmd);
- }
-
- static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct macb *bp = netdev_priv(dev);
-- int ret;
-- unsigned long flags;
--
-- spin_lock_irqsave(&bp->lock, flags);
-- ret = mii_ethtool_sset(&bp->mii, cmd);
-- spin_unlock_irqrestore(&bp->lock, flags);
-
-- return ret;
-+ return mii_ethtool_sset(&bp->mii, cmd);
- }
-
- static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-@@ -932,17 +920,11 @@
- static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- struct macb *bp = netdev_priv(dev);
-- int ret;
-- unsigned long flags;
-
- if (!netif_running(dev))
- return -EINVAL;
-
-- spin_lock_irqsave(&bp->lock, flags);
-- ret = generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
-- spin_unlock_irqrestore(&bp->lock, flags);
--
-- return ret;
-+ return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
- }
-
- static ssize_t macb_mii_show(const struct class_device *cd, char *buf,
-@@ -1046,6 +1028,14 @@
-
- spin_lock_init(&bp->lock);
-
-+#if defined(CONFIG_ARCH_AT91)
-+ bp->pclk = clk_get(&pdev->dev, "macb_clk");
-+ if (IS_ERR(bp->pclk)) {
-+ dev_err(&pdev->dev, "failed to get macb_clk\n");
-+ goto err_out_free_dev;
-+ }
-+ clk_enable(bp->pclk);
-+#else
- bp->pclk = clk_get(&pdev->dev, "pclk");
- if (IS_ERR(bp->pclk)) {
- dev_err(&pdev->dev, "failed to get pclk\n");
-@@ -1059,6 +1049,7 @@
-
- clk_enable(bp->pclk);
- clk_enable(bp->hclk);
-+#endif
-
- bp->regs = ioremap(regs->start, regs->end - regs->start + 1);
- if (!bp->regs) {
-@@ -1119,9 +1110,17 @@
-
- pdata = pdev->dev.platform_data;
- if (pdata && pdata->is_rmii)
-+#if defined(CONFIG_ARCH_AT91)
-+ macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
-+#else
- macb_writel(bp, USRIO, 0);
-+#endif
- else
-+#if defined(CONFIG_ARCH_AT91)
-+ macb_writel(bp, USRIO, MACB_BIT(CLKEN));
-+#else
- macb_writel(bp, USRIO, MACB_BIT(MII));
-+#endif
-
- bp->tx_pending = DEF_TX_RING_PENDING;
-
-@@ -1148,9 +1147,11 @@
- err_out_iounmap:
- iounmap(bp->regs);
- err_out_disable_clocks:
-+#ifndef CONFIG_ARCH_AT91
- clk_disable(bp->hclk);
-- clk_disable(bp->pclk);
- clk_put(bp->hclk);
-+#endif
-+ clk_disable(bp->pclk);
- err_out_put_pclk:
- clk_put(bp->pclk);
- err_out_free_dev:
-@@ -1173,9 +1174,11 @@
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- iounmap(bp->regs);
-+#ifndef CONFIG_ARCH_AT91
- clk_disable(bp->hclk);
-- clk_disable(bp->pclk);
- clk_put(bp->hclk);
-+#endif
-+ clk_disable(bp->pclk);
- clk_put(bp->pclk);
- free_netdev(dev);
- platform_set_drvdata(pdev, NULL);
-diff -urN linux-2.6.20.4-0rig/drivers/net/macb.h linux-2.6.20.4-atmel/drivers/net/macb.h
---- linux-2.6.20.4-0rig/drivers/net/macb.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/net/macb.h 2007-03-24 16:39:15.000000000 +0100
-@@ -200,7 +200,7 @@
- #define MACB_SOF_OFFSET 30
- #define MACB_SOF_SIZE 2
-
--/* Bitfields in USRIO */
-+/* Bitfields in USRIO (AVR32) */
- #define MACB_MII_OFFSET 0
- #define MACB_MII_SIZE 1
- #define MACB_EAM_OFFSET 1
-@@ -210,6 +210,12 @@
- #define MACB_TX_PAUSE_ZERO_OFFSET 3
- #define MACB_TX_PAUSE_ZERO_SIZE 1
-
-+/* Bitfields in USRIO (AT91) */
-+#define MACB_RMII_OFFSET 0
-+#define MACB_RMII_SIZE 1
-+#define MACB_CLKEN_OFFSET 1
-+#define MACB_CLKEN_SIZE 1
-+
- /* Bitfields in WOL */
- #define MACB_IP_OFFSET 0
- #define MACB_IP_SIZE 16
-diff -urN linux-2.6.20.4-0rig/drivers/pcmcia/at91_cf.c linux-2.6.20.4-atmel/drivers/pcmcia/at91_cf.c
---- linux-2.6.20.4-0rig/drivers/pcmcia/at91_cf.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/pcmcia/at91_cf.c 2007-03-24 16:39:15.000000000 +0100
-@@ -333,20 +333,27 @@
- struct at91_cf_data *board = cf->board;
-
- pcmcia_socket_dev_suspend(&pdev->dev, mesg);
-+
- if (device_may_wakeup(&pdev->dev)) {
- enable_irq_wake(board->det_pin);
- if (board->irq_pin)
- enable_irq_wake(board->irq_pin);
-- } else {
-- disable_irq_wake(board->det_pin);
-- if (board->irq_pin)
-- disable_irq_wake(board->irq_pin);
- }
-+
- return 0;
- }
-
- static int at91_cf_resume(struct platform_device *pdev)
- {
-+ struct at91_cf_socket *cf = platform_get_drvdata(pdev);
-+ struct at91_cf_data *board = cf->board;
-+
-+ if (device_may_wakeup(&pdev->dev)) {
-+ disable_irq_wake(board->det_pin);
-+ if (board->irq_pin)
-+ disable_irq_wake(board->irq_pin);
-+ }
-+
- pcmcia_socket_dev_resume(&pdev->dev);
- return 0;
- }
-diff -urN linux-2.6.20.4-0rig/drivers/serial/atmel_serial.c linux-2.6.20.4-atmel/drivers/serial/atmel_serial.c
---- linux-2.6.20.4-0rig/drivers/serial/atmel_serial.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/serial/atmel_serial.c 2007-03-24 16:42:29.000000000 +0100
-@@ -7,6 +7,8 @@
- * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
-+ * DMA support added by Chip Coldwell.
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -33,12 +35,14 @@
- #include <linux/sysrq.h>
- #include <linux/tty_flip.h>
- #include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/atmel_pdc.h>
-
- #include <asm/io.h>
-
- #include <asm/mach/serial_at91.h>
- #include <asm/arch/board.h>
--#include <asm/arch/at91_pdc.h>
-+
- #ifdef CONFIG_ARM
- #include <asm/arch/cpu.h>
- #include <asm/arch/gpio.h>
-@@ -46,6 +50,11 @@
-
- #include "atmel_serial.h"
-
-+#define SUPPORT_PDC
-+#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
-+#warning "Revisit"
-+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
-+
- #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
- #define SUPPORT_SYSRQ
- #endif
-@@ -73,39 +82,46 @@
-
- #define ATMEL_ISR_PASS_LIMIT 256
-
--#define UART_PUT_CR(port,v) writel(v, (port)->membase + ATMEL_US_CR)
--#define UART_GET_MR(port) readl((port)->membase + ATMEL_US_MR)
--#define UART_PUT_MR(port,v) writel(v, (port)->membase + ATMEL_US_MR)
--#define UART_PUT_IER(port,v) writel(v, (port)->membase + ATMEL_US_IER)
--#define UART_PUT_IDR(port,v) writel(v, (port)->membase + ATMEL_US_IDR)
--#define UART_GET_IMR(port) readl((port)->membase + ATMEL_US_IMR)
--#define UART_GET_CSR(port) readl((port)->membase + ATMEL_US_CSR)
--#define UART_GET_CHAR(port) readl((port)->membase + ATMEL_US_RHR)
--#define UART_PUT_CHAR(port,v) writel(v, (port)->membase + ATMEL_US_THR)
--#define UART_GET_BRGR(port) readl((port)->membase + ATMEL_US_BRGR)
--#define UART_PUT_BRGR(port,v) writel(v, (port)->membase + ATMEL_US_BRGR)
--#define UART_PUT_RTOR(port,v) writel(v, (port)->membase + ATMEL_US_RTOR)
-+#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
-+#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
-+#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
-+#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
-+#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
-+#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
-+#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
-+#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
-+#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
-+#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
-+#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
-+#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
-
--// #define UART_GET_CR(port) readl((port)->membase + ATMEL_US_CR) // is write-only
-+// #define UART_GET_CR(port) __raw_readl((port)->membase + ATMEL_US_CR) // is write-only
-
- /* PDC registers */
--#define UART_PUT_PTCR(port,v) writel(v, (port)->membase + ATMEL_PDC_PTCR)
--#define UART_GET_PTSR(port) readl((port)->membase + ATMEL_PDC_PTSR)
-+#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
-+#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
-
--#define UART_PUT_RPR(port,v) writel(v, (port)->membase + ATMEL_PDC_RPR)
--#define UART_GET_RPR(port) readl((port)->membase + ATMEL_PDC_RPR)
--#define UART_PUT_RCR(port,v) writel(v, (port)->membase + ATMEL_PDC_RCR)
--#define UART_PUT_RNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_RNPR)
--#define UART_PUT_RNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_RNCR)
--
--#define UART_PUT_TPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TPR)
--#define UART_PUT_TCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TCR)
--//#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNPR)
--//#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + ATMEL_PDC_TNCR)
-+#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
-+#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
-+#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
-+#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
-+#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
-+
-+#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
-+#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
-+//#define UART_PUT_TNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
-+//#define UART_PUT_TNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
-
- static int (*atmel_open_hook)(struct uart_port *);
- static void (*atmel_close_hook)(struct uart_port *);
-
-+struct atmel_dma_buffer {
-+ unsigned char *buf;
-+ dma_addr_t dma_addr;
-+ size_t dma_size;
-+ unsigned int ofs;
-+};
-+
- /*
- * We wrap our port structure around the generic uart_port.
- */
-@@ -113,10 +129,20 @@
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
-+
-+ short use_dma_rx; /* enable PDC receiver */
-+ short pdc_rx_idx; /* current PDC RX buffer */
-+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
-+
-+ short use_dma_tx; /* enable PDC transmitter */
-+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-
-+#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
-+#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
-+
- #ifdef SUPPORT_SYSRQ
- static struct console atmel_console;
- #endif
-@@ -204,7 +230,12 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IDR(port, ATMEL_US_TXRDY);
-+ if (atmel_port->use_dma_tx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -214,7 +245,17 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IER(port, ATMEL_US_TXRDY);
-+ if (atmel_port->use_dma_tx) {
-+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
-+ /* The transmitter is already running. Yes, we
-+ really need this.*/
-+ return;
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -224,7 +265,12 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IDR(port, ATMEL_US_RXRDY);
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
-+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
- }
-
- /*
-@@ -247,6 +293,134 @@
- }
-
- /*
-+ * Receive data via the PDC. A buffer has been fulled.
-+ */
-+static void atmel_pdc_endrx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ unsigned int count;
-+
-+ count = pdc->dma_size - pdc->ofs;
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ port->icount.rx += count;
-+ }
-+
-+ /* Set this buffer as the next receive buffer */
-+ pdc->ofs = 0;
-+ UART_PUT_RNPR(port, pdc->dma_addr);
-+ UART_PUT_RNCR(port, pdc->dma_size);
-+
-+ /* Switch to next buffer */
-+ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
-+}
-+
-+/*
-+ * Receive data via the PDC. At least one byte was received, but the
-+ * buffer was not full when the inter-character timeout expired.
-+ */
-+static void atmel_pdc_timeout(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ /* unsigned */ int ofs, count;
-+
-+ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
-+ count = ofs - pdc->ofs;
-+
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ pdc->ofs = ofs;
-+ port->icount.rx += count;
-+ }
-+
-+ /* reset the UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+}
-+
-+/*
-+ * Deal with parity, framing and overrun errors.
-+ */
-+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
-+{
-+ /* clear error */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+
-+ if (status & ATMEL_US_RXBRK) {
-+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
-+ port->icount.brk++;
-+ }
-+ if (status & ATMEL_US_PARE)
-+ port->icount.parity++;
-+ if (status & ATMEL_US_FRAME)
-+ port->icount.frame++;
-+ if (status & ATMEL_US_OVRE)
-+ port->icount.overrun++;
-+}
-+
-+/*
-+ * A transmission via the PDC is complete.
-+ */
-+static void atmel_pdc_endtx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ xmit->tail += pdc->ofs;
-+ if (xmit->tail >= SERIAL_XMIT_SIZE)
-+ xmit->tail -= SERIAL_XMIT_SIZE;
-+
-+ port->icount.tx += pdc->ofs;
-+ pdc->ofs = 0;
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+}
-+
-+/*
-+ * The PDC transmitter is idle, so either start the next transfer or
-+ * disable the transmitter.
-+ */
-+static void atmel_pdc_txbufe(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ int count;
-+
-+ if (!uart_circ_empty(xmit)) {
-+ /* more to transmit - setup next transfer */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+
-+ if (xmit->tail < xmit->head)
-+ count = xmit->head - xmit->tail;
-+ else
-+ count = SERIAL_XMIT_SIZE - xmit->tail;
-+ pdc->ofs = count;
-+
-+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
-+ UART_PUT_TCR(port, count);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else {
-+ /* nothing left to transmit - disable the transmitter */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+}
-+
-+/*
- * Characters received (called from interrupt handler)
- */
- static void atmel_rx_chars(struct uart_port *port)
-@@ -348,6 +522,14 @@
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- while (pending) {
-+ /* PDC receive */
-+ if (pending & ATMEL_US_ENDRX)
-+ atmel_pdc_endrx(port);
-+ if (pending & ATMEL_US_TIMEOUT)
-+ atmel_pdc_timeout(port);
-+ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
-+ atmel_pdc_rxerr(port, pending);
-+
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-@@ -362,6 +544,12 @@
- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
-
-+ /* PDC transmit */
-+ if (pending & ATMEL_US_ENDTX)
-+ atmel_pdc_endtx(port);
-+ if (pending & ATMEL_US_TXBUFE)
-+ atmel_pdc_txbufe(port);
-+
- /* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY)
- atmel_tx_chars(port);
-@@ -400,6 +588,47 @@
- }
-
- /*
-+ * Initialize DMA (if necessary)
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
-+ if (pdc->buf == NULL) {
-+ if (i != 0) {
-+ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ kfree(atmel_port->pdc_rx[0].buf);
-+ }
-+ free_irq(port->irq, port);
-+ return -ENOMEM;
-+ }
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ pdc->dma_size = PDC_BUFFER_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ atmel_port->pdc_rx_idx = 0;
-+
-+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
-+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
-+
-+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
-+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ struct circ_buf *xmit = &port->info->xmit;
-+
-+ pdc->buf = xmit->buf;
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
-+ pdc->dma_size = SERIAL_XMIT_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
-@@ -417,7 +646,15 @@
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
-
-- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-
- return 0;
- }
-@@ -430,6 +667,25 @@
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
- /*
-+ * Shut-down the DMA.
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ kfree(pdc->buf);
-+ }
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+ }
-+
-+ /*
- * Disable all interrupts, port and break condition.
- */
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
-@@ -480,6 +736,7 @@
- */
- static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
-@@ -533,6 +790,9 @@
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= ATMEL_US_RXBRK;
-
-+ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
-+ UART_PUT_IER(port, port->read_status_mask);
-+
- /*
- * Characters to ignore
- */
-@@ -711,6 +971,11 @@
- clk_enable(atmel_port->clk);
- port->uartclk = clk_get_rate(atmel_port->clk);
- }
-+
-+#ifdef SUPPORT_PDC
-+ atmel_port->use_dma_rx = data->use_dma_rx;
-+ atmel_port->use_dma_tx = data->use_dma_tx;
-+#endif
- }
-
- /*
-diff -urN linux-2.6.20.4-0rig/drivers/spi/atmel_spi.c linux-2.6.20.4-atmel/drivers/spi/atmel_spi.c
---- linux-2.6.20.4-0rig/drivers/spi/atmel_spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/spi/atmel_spi.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,699 @@
-+/*
-+ * Driver for Atmel AT32 and AT91 SPI Controllers
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_ARCH_AT91
-+#include <asm/arch/cpu.h>
-+#endif
-+
-+#include "atmel_spi.h"
-+
-+/*
-+ * The core SPI transfer engine just talks to a register bank to set up
-+ * DMA transfers; transfer queue progress is driven by IRQs. The clock
-+ * framework provides the base clock, subdivided for each spi_device.
-+ *
-+ * Newer controllers, marked with "new_1" flag, have:
-+ * - CR.LASTXFER
-+ * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
-+ * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
-+ * - SPI_CSRx.CSAAT
-+ * - SPI_CSRx.SBCR allows faster clocking
-+ */
-+struct atmel_spi {
-+ spinlock_t lock;
-+
-+ void __iomem *regs;
-+ int irq;
-+ struct clk *clk;
-+ struct platform_device *pdev;
-+ unsigned new_1:1;
-+
-+ u8 stopping;
-+ struct list_head queue;
-+ struct spi_transfer *current_transfer;
-+ unsigned long remaining_bytes;
-+
-+ void *buffer;
-+ dma_addr_t buffer_dma;
-+};
-+
-+#define BUFFER_SIZE PAGE_SIZE
-+#define INVALID_DMA_ADDRESS 0xffffffff
-+
-+/*
-+ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
-+ * they assume that spi slave device state will not change on deselect, so
-+ * that automagic deselection is OK. Not so! Workaround uses nCSx pins
-+ * as GPIOs; or newer controllers have CSAAT and friends.
-+ *
-+ * Since the CSAAT functionality is a bit weird on newer controllers
-+ * as well, we use GPIO to control nCSx pins on all controllers.
-+ */
-+
-+static inline void cs_activate(struct spi_device *spi)
-+{
-+ unsigned gpio = (unsigned) spi->controller_data;
-+ unsigned active = spi->mode & SPI_CS_HIGH;
-+
-+ dev_dbg(&spi->dev, "activate %u%s\n", gpio, active ? " (high)" : "");
-+#ifdef CONFIG_ARCH_AT91
-+ at91_set_gpio_value(gpio, active);
-+#else
-+ gpio_set_value(gpio, active);
-+#endif
-+}
-+
-+static inline void cs_deactivate(struct spi_device *spi)
-+{
-+ unsigned gpio = (unsigned) spi->controller_data;
-+ unsigned active = spi->mode & SPI_CS_HIGH;
-+
-+ dev_dbg(&spi->dev, "DEactivate %u%s\n", gpio, active ? " (low)" : "");
-+#ifdef CONFIG_ARCH_AT91
-+ at91_set_gpio_value(gpio, !active);
-+#else
-+ gpio_set_value(gpio, !active);
-+#endif
-+}
-+
-+/*
-+ * Submit next transfer for DMA.
-+ * lock is held, spi irq is blocked
-+ */
-+static void atmel_spi_next_xfer(struct spi_master *master,
-+ struct spi_message *msg)
-+{
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+ struct spi_transfer *xfer;
-+ u32 len;
-+ dma_addr_t tx_dma, rx_dma;
-+
-+ xfer = as->current_transfer;
-+ if (!xfer || as->remaining_bytes == 0) {
-+ if (xfer)
-+ xfer = list_entry(xfer->transfer_list.next,
-+ struct spi_transfer, transfer_list);
-+ else
-+ xfer = list_entry(msg->transfers.next,
-+ struct spi_transfer, transfer_list);
-+ as->remaining_bytes = xfer->len;
-+ as->current_transfer = xfer;
-+ }
-+
-+ len = as->remaining_bytes;
-+
-+ tx_dma = xfer->tx_dma;
-+ rx_dma = xfer->rx_dma;
-+
-+ /* use scratch buffer only when rx or tx data is unspecified */
-+ if (rx_dma == INVALID_DMA_ADDRESS) {
-+ rx_dma = as->buffer_dma;
-+ if (len > BUFFER_SIZE)
-+ len = BUFFER_SIZE;
-+ }
-+ if (tx_dma == INVALID_DMA_ADDRESS) {
-+ tx_dma = as->buffer_dma;
-+ if (len > BUFFER_SIZE)
-+ len = BUFFER_SIZE;
-+ memset(as->buffer, 0, len);
-+ dma_sync_single_for_device(&as->pdev->dev,
-+ as->buffer_dma, len, DMA_TO_DEVICE);
-+ }
-+
-+ spi_writel(as, RPR, rx_dma);
-+ spi_writel(as, TPR, tx_dma);
-+
-+ as->remaining_bytes -= len;
-+ if (msg->spi->bits_per_word > 8)
-+ len >>= 1;
-+
-+ /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
-+ * mechanism might help avoid the IRQ latency between transfers
-+ *
-+ * We're also waiting for ENDRX before we start the next
-+ * transfer because we need to handle some difficult timing
-+ * issues otherwise. If we wait for ENDTX in one transfer and
-+ * then starts waiting for ENDRX in the next, it's difficult
-+ * to tell the difference between the ENDRX interrupt we're
-+ * actually waiting for and the ENDRX interrupt of the
-+ * previous transfer.
-+ *
-+ * It should be doable, though. Just not now...
-+ */
-+ spi_writel(as, TNCR, 0);
-+ spi_writel(as, RNCR, 0);
-+ spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
-+
-+ dev_dbg(&msg->spi->dev,
-+ " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
-+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-+ xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
-+
-+ wmb();
-+ spi_writel(as, TCR, len);
-+ spi_writel(as, RCR, len);
-+ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
-+}
-+
-+static void atmel_spi_next_message(struct spi_master *master)
-+{
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+ struct spi_message *msg;
-+ u32 mr;
-+
-+ BUG_ON(as->current_transfer);
-+
-+ msg = list_entry(as->queue.next, struct spi_message, queue);
-+
-+ /* Select the chip */
-+ mr = spi_readl(as, MR);
-+ mr = SPI_BFINS(PCS, ~(1 << msg->spi->chip_select), mr);
-+ spi_writel(as, MR, mr);
-+ cs_activate(msg->spi);
-+
-+ atmel_spi_next_xfer(master, msg);
-+}
-+
-+static void
-+atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
-+{
-+ xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
-+ if (xfer->tx_buf)
-+ xfer->tx_dma = dma_map_single(&as->pdev->dev,
-+ (void *) xfer->tx_buf, xfer->len,
-+ DMA_TO_DEVICE);
-+ if (xfer->rx_buf)
-+ xfer->rx_dma = dma_map_single(&as->pdev->dev,
-+ xfer->rx_buf, xfer->len,
-+ DMA_FROM_DEVICE);
-+}
-+
-+static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
-+ struct spi_transfer *xfer)
-+{
-+ if (xfer->tx_dma != INVALID_DMA_ADDRESS)
-+ dma_unmap_single(master->cdev.dev, xfer->tx_dma,
-+ xfer->len, DMA_TO_DEVICE);
-+ if (xfer->rx_dma != INVALID_DMA_ADDRESS)
-+ dma_unmap_single(master->cdev.dev, xfer->rx_dma,
-+ xfer->len, DMA_FROM_DEVICE);
-+}
-+
-+static void
-+atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
-+ struct spi_message *msg, int status)
-+{
-+ cs_deactivate(msg->spi);
-+ list_del(&msg->queue);
-+ msg->status = status;
-+
-+ dev_dbg(master->cdev.dev,
-+ "xfer complete: %u bytes transferred\n",
-+ msg->actual_length);
-+
-+ spin_unlock(&as->lock);
-+ msg->complete(msg->context);
-+ spin_lock(&as->lock);
-+
-+ as->current_transfer = NULL;
-+
-+ /* continue if needed */
-+ if (list_empty(&as->queue) || as->stopping)
-+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+ else
-+ atmel_spi_next_message(master);
-+}
-+
-+static irqreturn_t
-+atmel_spi_interrupt(int irq, void *dev_id)
-+{
-+ struct spi_master *master = dev_id;
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+ struct spi_message *msg;
-+ struct spi_transfer *xfer;
-+ u32 status, pending, imr;
-+ int ret = IRQ_NONE;
-+
-+ spin_lock(&as->lock);
-+
-+ xfer = as->current_transfer;
-+ msg = list_entry(as->queue.next, struct spi_message, queue);
-+
-+ imr = spi_readl(as, IMR);
-+ status = spi_readl(as, SR);
-+ pending = status & imr;
-+
-+ if (pending & SPI_BIT(OVRES)) {
-+ int timeout;
-+
-+ ret = IRQ_HANDLED;
-+
-+ spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX)
-+ | SPI_BIT(OVRES)));
-+
-+ /*
-+ * When we get an overrun, we disregard the current
-+ * transfer. Data will not be copied back from any
-+ * bounce buffer and msg->actual_len will not be
-+ * updated with the last xfer.
-+ *
-+ * We will also not process any remaning transfers in
-+ * the message.
-+ *
-+ * First, stop the transfer and unmap the DMA buffers.
-+ */
-+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+ if (!msg->is_dma_mapped)
-+ atmel_spi_dma_unmap_xfer(master, xfer);
-+
-+ /* REVISIT: udelay in irq is unfriendly */
-+ if (xfer->delay_usecs)
-+ udelay(xfer->delay_usecs);
-+
-+ dev_warn(master->cdev.dev, "fifo overrun (%u/%u remaining)\n",
-+ spi_readl(as, TCR), spi_readl(as, RCR));
-+
-+ /*
-+ * Clean up DMA registers and make sure the data
-+ * registers are empty.
-+ */
-+ spi_writel(as, RNCR, 0);
-+ spi_writel(as, TNCR, 0);
-+ spi_writel(as, RCR, 0);
-+ spi_writel(as, TCR, 0);
-+ for (timeout = 1000; timeout; timeout--)
-+ if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
-+ break;
-+ if (!timeout)
-+ dev_warn(master->cdev.dev,
-+ "timeout waiting for TXEMPTY");
-+ while (spi_readl(as, SR) & SPI_BIT(RDRF))
-+ spi_readl(as, RDR);
-+
-+ /* Clear any overrun happening while cleaning up */
-+ spi_readl(as, SR);
-+
-+ atmel_spi_msg_done(master, as, msg, -EIO);
-+ } else if (pending & SPI_BIT(ENDRX)) {
-+ ret = IRQ_HANDLED;
-+
-+ spi_writel(as, IDR, pending);
-+
-+ if (as->remaining_bytes == 0) {
-+ msg->actual_length += xfer->len;
-+
-+ if (!msg->is_dma_mapped)
-+ atmel_spi_dma_unmap_xfer(master, xfer);
-+
-+ /* REVISIT: udelay in irq is unfriendly */
-+ if (xfer->delay_usecs)
-+ udelay(xfer->delay_usecs);
-+
-+ if (msg->transfers.prev == &xfer->transfer_list) {
-+ /* report completed message */
-+ atmel_spi_msg_done(master, as, msg, 0);
-+ } else {
-+ if (xfer->cs_change) {
-+ cs_deactivate(msg->spi);
-+ udelay(1);
-+ cs_activate(msg->spi);
-+ }
-+
-+ /*
-+ * Not done yet. Submit the next transfer.
-+ *
-+ * FIXME handle protocol options for xfer
-+ */
-+ atmel_spi_next_xfer(master, msg);
-+ }
-+ } else {
-+ /*
-+ * Keep going, we still have data to send in
-+ * the current transfer.
-+ */
-+ atmel_spi_next_xfer(master, msg);
-+ }
-+ }
-+
-+ spin_unlock(&as->lock);
-+
-+ return ret;
-+}
-+
-+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
-+
-+static int atmel_spi_setup(struct spi_device *spi)
-+{
-+ struct atmel_spi *as;
-+ u32 scbr, csr;
-+ unsigned int bits = spi->bits_per_word;
-+ unsigned long bus_hz, sck_hz;
-+ unsigned int npcs_pin;
-+ int ret;
-+
-+ as = spi_master_get_devdata(spi->master);
-+
-+ if (as->stopping)
-+ return -ESHUTDOWN;
-+
-+ if (spi->chip_select > spi->master->num_chipselect) {
-+ dev_dbg(&spi->dev,
-+ "setup: invalid chipselect %u (%u defined)\n",
-+ spi->chip_select, spi->master->num_chipselect);
-+ return -EINVAL;
-+ }
-+
-+ if (bits == 0)
-+ bits = 8;
-+ if (bits < 8 || bits > 16) {
-+ dev_dbg(&spi->dev,
-+ "setup: invalid bits_per_word %u (8 to 16)\n",
-+ bits);
-+ return -EINVAL;
-+ }
-+
-+ if (spi->mode & ~MODEBITS) {
-+ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
-+ spi->mode & ~MODEBITS);
-+ return -EINVAL;
-+ }
-+
-+ /* speed zero convention is used by some upper layers */
-+ bus_hz = clk_get_rate(as->clk);
-+ if (spi->max_speed_hz) {
-+ /* assume div32/fdiv/mbz == 0 */
-+ if (!as->new_1)
-+ bus_hz /= 2;
-+ scbr = ((bus_hz + spi->max_speed_hz - 1)
-+ / spi->max_speed_hz);
-+ if (scbr >= (1 << SPI_SCBR_SIZE)) {
-+ dev_dbg(&spi->dev, "setup: %d Hz too slow, scbr %u\n",
-+ spi->max_speed_hz, scbr);
-+ return -EINVAL;
-+ }
-+ } else
-+ scbr = 0xff;
-+ sck_hz = bus_hz / scbr;
-+
-+ csr = SPI_BF(SCBR, scbr) | SPI_BF(BITS, bits - 8);
-+ if (spi->mode & SPI_CPOL)
-+ csr |= SPI_BIT(CPOL);
-+ if (!(spi->mode & SPI_CPHA))
-+ csr |= SPI_BIT(NCPHA);
-+
-+ /* TODO: DLYBS and DLYBCT */
-+ csr |= SPI_BF(DLYBS, 10);
-+ csr |= SPI_BF(DLYBCT, 10);
-+
-+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
-+ npcs_pin = (unsigned int)spi->controller_data;
-+ if (!spi->controller_state) {
-+#ifndef CONFIG_ARCH_AT91
-+ ret = gpio_request(npcs_pin, "spi_npcs");
-+ if (ret)
-+ return ret;
-+#endif
-+ spi->controller_state = (void *)npcs_pin;
-+#ifdef CONFIG_ARCH_AT91
-+ at91_set_gpio_output(npcs_pin, 0);
-+#else
-+ gpio_direction_output(npcs_pin);
-+#endif
-+ }
-+
-+ dev_dbg(&spi->dev,
-+ "setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
-+ sck_hz, bits, spi->mode, spi->chip_select, csr);
-+
-+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
-+
-+ return 0;
-+}
-+
-+static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+ struct atmel_spi *as;
-+ struct spi_transfer *xfer;
-+ unsigned long flags;
-+ struct device *controller = spi->master->cdev.dev;
-+
-+ as = spi_master_get_devdata(spi->master);
-+
-+ dev_dbg(controller, "new message %p submitted for %s\n",
-+ msg, spi->dev.bus_id);
-+
-+ if (unlikely(list_empty(&msg->transfers)
-+ || !spi->max_speed_hz))
-+ return -EINVAL;
-+
-+ if (as->stopping)
-+ return -ESHUTDOWN;
-+
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ if (!(xfer->tx_buf || xfer->rx_buf)) {
-+ dev_dbg(&spi->dev, "missing rx or tx buf\n");
-+ return -EINVAL;
-+ }
-+
-+ /* FIXME implement these protocol options!! */
-+ if (xfer->bits_per_word || xfer->speed_hz) {
-+ dev_dbg(&spi->dev, "no protocol options yet\n");
-+ return -ENOPROTOOPT;
-+ }
-+ }
-+
-+ /* scrub dcache "early" */
-+ if (!msg->is_dma_mapped) {
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list)
-+ atmel_spi_dma_map_xfer(as, xfer);
-+ }
-+
-+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-+ dev_dbg(controller,
-+ " xfer %p: len %u tx %p/%08x rx %p/%08x\n",
-+ xfer, xfer->len,
-+ xfer->tx_buf, xfer->tx_dma,
-+ xfer->rx_buf, xfer->rx_dma);
-+ }
-+
-+ msg->status = -EINPROGRESS;
-+ msg->actual_length = 0;
-+
-+ spin_lock_irqsave(&as->lock, flags);
-+ list_add_tail(&msg->queue, &as->queue);
-+ if (!as->current_transfer)
-+ atmel_spi_next_message(spi->master);
-+ spin_unlock_irqrestore(&as->lock, flags);
-+
-+ return 0;
-+}
-+
-+static void atmel_spi_cleanup(const struct spi_device *spi)
-+{
-+#ifndef CONFIG_ARCH_AT91
-+ if (spi->controller_state)
-+ gpio_free((unsigned int)spi->controller_data);
-+#endif
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init atmel_spi_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs;
-+ int irq;
-+ struct clk *clk;
-+ int ret;
-+ struct spi_master *master;
-+ struct atmel_spi *as;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ clk = clk_get(&pdev->dev, "spi_clk");
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+
-+ /* setup spi core then atmel-specific driver state */
-+ ret = -ENOMEM;
-+ master = spi_alloc_master(&pdev->dev, sizeof *as);
-+ if (!master)
-+ goto out_free;
-+
-+ master->bus_num = pdev->id;
-+ master->num_chipselect = 4;
-+ master->setup = atmel_spi_setup;
-+ master->transfer = atmel_spi_transfer;
-+ master->cleanup = atmel_spi_cleanup;
-+ platform_set_drvdata(pdev, master);
-+
-+ as = spi_master_get_devdata(master);
-+
-+ as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
-+ &as->buffer_dma, GFP_KERNEL);
-+ if (!as->buffer)
-+ goto out_free;
-+
-+ spin_lock_init(&as->lock);
-+ INIT_LIST_HEAD(&as->queue);
-+ as->pdev = pdev;
-+ as->regs = ioremap(regs->start, (regs->end - regs->start) + 1);
-+ if (!as->regs)
-+ goto out_free_buffer;
-+ as->irq = irq;
-+ as->clk = clk;
-+#ifdef CONFIG_ARCH_AT91
-+ if (!cpu_is_at91rm9200())
-+ as->new_1 = 1;
-+#endif
-+
-+ ret = request_irq(irq, atmel_spi_interrupt, 0,
-+ pdev->dev.bus_id, master);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* Initialize the hardware */
-+ clk_enable(clk);
-+ spi_writel(as, CR, SPI_BIT(SWRST));
-+ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
-+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
-+ spi_writel(as, CR, SPI_BIT(SPIEN));
-+
-+ /* go! */
-+ dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
-+ (unsigned long)regs->start, irq);
-+
-+ ret = spi_register_master(master);
-+ if (ret)
-+ goto out_reset_hw;
-+
-+ return 0;
-+
-+out_reset_hw:
-+ spi_writel(as, CR, SPI_BIT(SWRST));
-+ clk_disable(clk);
-+ free_irq(irq, master);
-+out_unmap_regs:
-+ iounmap(as->regs);
-+out_free_buffer:
-+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
-+ as->buffer_dma);
-+out_free:
-+ clk_put(clk);
-+ spi_master_put(master);
-+ return ret;
-+}
-+
-+static int __exit atmel_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+ struct spi_message *msg;
-+
-+ /* reset the hardware and block queue progress */
-+ spin_lock_irq(&as->lock);
-+ as->stopping = 1;
-+ spi_writel(as, CR, SPI_BIT(SWRST));
-+ spi_readl(as, SR);
-+ spin_unlock_irq(&as->lock);
-+
-+ /* Terminate remaining queued transfers */
-+ list_for_each_entry(msg, &as->queue, queue) {
-+ /* REVISIT unmapping the dma is a NOP on ARM and AVR32
-+ * but we shouldn't depend on that...
-+ */
-+ msg->status = -ESHUTDOWN;
-+ msg->complete(msg->context);
-+ }
-+
-+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
-+ as->buffer_dma);
-+
-+ clk_disable(as->clk);
-+ clk_put(as->clk);
-+ free_irq(as->irq, master);
-+ iounmap(as->regs);
-+
-+ spi_unregister_master(master);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+
-+ clk_disable(as->clk);
-+ return 0;
-+}
-+
-+static int atmel_spi_resume(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct atmel_spi *as = spi_master_get_devdata(master);
-+
-+ clk_enable(as->clk);
-+ return 0;
-+}
-+
-+#else
-+#define atmel_spi_suspend NULL
-+#define atmel_spi_resume NULL
-+#endif
-+
-+
-+static struct platform_driver atmel_spi_driver = {
-+ .driver = {
-+ .name = "atmel_spi",
-+ .owner = THIS_MODULE,
-+ },
-+ .suspend = atmel_spi_suspend,
-+ .resume = atmel_spi_resume,
-+ .remove = __exit_p(atmel_spi_remove),
-+};
-+
-+static int __init atmel_spi_init(void)
-+{
-+ return platform_driver_probe(&atmel_spi_driver, atmel_spi_probe);
-+}
-+module_init(atmel_spi_init);
-+
-+static void __exit atmel_spi_exit(void)
-+{
-+ platform_driver_unregister(&atmel_spi_driver);
-+}
-+module_exit(atmel_spi_exit);
-+
-+MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/spi/atmel_spi.h linux-2.6.20.4-atmel/drivers/spi/atmel_spi.h
---- linux-2.6.20.4-0rig/drivers/spi/atmel_spi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/spi/atmel_spi.h 2007-03-24 16:43:57.000000000 +0100
-@@ -0,0 +1,167 @@
-+/*
-+ * Register definitions for Atmel Serial Peripheral Interface (SPI)
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ATMEL_SPI_H__
-+#define __ATMEL_SPI_H__
-+
-+/* SPI register offsets */
-+#define SPI_CR 0x0000
-+#define SPI_MR 0x0004
-+#define SPI_RDR 0x0008
-+#define SPI_TDR 0x000c
-+#define SPI_SR 0x0010
-+#define SPI_IER 0x0014
-+#define SPI_IDR 0x0018
-+#define SPI_IMR 0x001c
-+#define SPI_CSR0 0x0030
-+#define SPI_CSR1 0x0034
-+#define SPI_CSR2 0x0038
-+#define SPI_CSR3 0x003c
-+#define SPI_RPR 0x0100
-+#define SPI_RCR 0x0104
-+#define SPI_TPR 0x0108
-+#define SPI_TCR 0x010c
-+#define SPI_RNPR 0x0110
-+#define SPI_RNCR 0x0114
-+#define SPI_TNPR 0x0118
-+#define SPI_TNCR 0x011c
-+#define SPI_PTCR 0x0120
-+#define SPI_PTSR 0x0124
-+
-+/* Bitfields in CR */
-+#define SPI_SPIEN_OFFSET 0
-+#define SPI_SPIEN_SIZE 1
-+#define SPI_SPIDIS_OFFSET 1
-+#define SPI_SPIDIS_SIZE 1
-+#define SPI_SWRST_OFFSET 7
-+#define SPI_SWRST_SIZE 1
-+#define SPI_LASTXFER_OFFSET 24
-+#define SPI_LASTXFER_SIZE 1
-+
-+/* Bitfields in MR */
-+#define SPI_MSTR_OFFSET 0
-+#define SPI_MSTR_SIZE 1
-+#define SPI_PS_OFFSET 1
-+#define SPI_PS_SIZE 1
-+#define SPI_PCSDEC_OFFSET 2
-+#define SPI_PCSDEC_SIZE 1
-+#define SPI_FDIV_OFFSET 3
-+#define SPI_FDIV_SIZE 1
-+#define SPI_MODFDIS_OFFSET 4
-+#define SPI_MODFDIS_SIZE 1
-+#define SPI_LLB_OFFSET 7
-+#define SPI_LLB_SIZE 1
-+#define SPI_PCS_OFFSET 16
-+#define SPI_PCS_SIZE 4
-+#define SPI_DLYBCS_OFFSET 24
-+#define SPI_DLYBCS_SIZE 8
-+
-+/* Bitfields in RDR */
-+#define SPI_RD_OFFSET 0
-+#define SPI_RD_SIZE 16
-+
-+/* Bitfields in TDR */
-+#define SPI_TD_OFFSET 0
-+#define SPI_TD_SIZE 16
-+
-+/* Bitfields in SR */
-+#define SPI_RDRF_OFFSET 0
-+#define SPI_RDRF_SIZE 1
-+#define SPI_TDRE_OFFSET 1
-+#define SPI_TDRE_SIZE 1
-+#define SPI_MODF_OFFSET 2
-+#define SPI_MODF_SIZE 1
-+#define SPI_OVRES_OFFSET 3
-+#define SPI_OVRES_SIZE 1
-+#define SPI_ENDRX_OFFSET 4
-+#define SPI_ENDRX_SIZE 1
-+#define SPI_ENDTX_OFFSET 5
-+#define SPI_ENDTX_SIZE 1
-+#define SPI_RXBUFF_OFFSET 6
-+#define SPI_RXBUFF_SIZE 1
-+#define SPI_TXBUFE_OFFSET 7
-+#define SPI_TXBUFE_SIZE 1
-+#define SPI_NSSR_OFFSET 8
-+#define SPI_NSSR_SIZE 1
-+#define SPI_TXEMPTY_OFFSET 9
-+#define SPI_TXEMPTY_SIZE 1
-+#define SPI_SPIENS_OFFSET 16
-+#define SPI_SPIENS_SIZE 1
-+
-+/* Bitfields in CSR0 */
-+#define SPI_CPOL_OFFSET 0
-+#define SPI_CPOL_SIZE 1
-+#define SPI_NCPHA_OFFSET 1
-+#define SPI_NCPHA_SIZE 1
-+#define SPI_CSAAT_OFFSET 3
-+#define SPI_CSAAT_SIZE 1
-+#define SPI_BITS_OFFSET 4
-+#define SPI_BITS_SIZE 4
-+#define SPI_SCBR_OFFSET 8
-+#define SPI_SCBR_SIZE 8
-+#define SPI_DLYBS_OFFSET 16
-+#define SPI_DLYBS_SIZE 8
-+#define SPI_DLYBCT_OFFSET 24
-+#define SPI_DLYBCT_SIZE 8
-+
-+/* Bitfields in RCR */
-+#define SPI_RXCTR_OFFSET 0
-+#define SPI_RXCTR_SIZE 16
-+
-+/* Bitfields in TCR */
-+#define SPI_TXCTR_OFFSET 0
-+#define SPI_TXCTR_SIZE 16
-+
-+/* Bitfields in RNCR */
-+#define SPI_RXNCR_OFFSET 0
-+#define SPI_RXNCR_SIZE 16
-+
-+/* Bitfields in TNCR */
-+#define SPI_TXNCR_OFFSET 0
-+#define SPI_TXNCR_SIZE 16
-+
-+/* Bitfields in PTCR */
-+#define SPI_RXTEN_OFFSET 0
-+#define SPI_RXTEN_SIZE 1
-+#define SPI_RXTDIS_OFFSET 1
-+#define SPI_RXTDIS_SIZE 1
-+#define SPI_TXTEN_OFFSET 8
-+#define SPI_TXTEN_SIZE 1
-+#define SPI_TXTDIS_OFFSET 9
-+#define SPI_TXTDIS_SIZE 1
-+
-+/* Constants for BITS */
-+#define SPI_BITS_8_BPT 0
-+#define SPI_BITS_9_BPT 1
-+#define SPI_BITS_10_BPT 2
-+#define SPI_BITS_11_BPT 3
-+#define SPI_BITS_12_BPT 4
-+#define SPI_BITS_13_BPT 5
-+#define SPI_BITS_14_BPT 6
-+#define SPI_BITS_15_BPT 7
-+#define SPI_BITS_16_BPT 8
-+
-+/* Bit manipulation macros */
-+#define SPI_BIT(name) \
-+ (1 << SPI_##name##_OFFSET)
-+#define SPI_BF(name,value) \
-+ (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
-+#define SPI_BFEXT(name,value) \
-+ (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
-+#define SPI_BFINS(name,value,old) \
-+ ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
-+ | SPI_BF(name,value))
-+
-+/* Register access macros */
-+#define spi_readl(port,reg) \
-+ __raw_readl((port)->regs + SPI_##reg)
-+#define spi_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + SPI_##reg)
-+
-+#endif /* __ATMEL_SPI_H__ */
-diff -urN linux-2.6.20.4-0rig/drivers/spi/Kconfig linux-2.6.20.4-atmel/drivers/spi/Kconfig
---- linux-2.6.20.4-0rig/drivers/spi/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/spi/Kconfig 2007-03-24 16:43:49.000000000 +0100
-@@ -51,6 +51,21 @@
- comment "SPI Master Controller Drivers"
- depends on SPI_MASTER
-
-+config SPI_ATMEL
-+ tristate "Atmel SPI Controller"
-+ depends on (ARCH_AT91 || AVR32) && SPI_MASTER
-+ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
-+ help
-+ This selects a driver for the Atmel SPI Controller, present on
-+ many AT32 (AVR32) and AT91 (ARM) chips.
-+
-+config SPI_ATMEL
-+ tristate "Atmel SPI Controller"
-+ depends on (ARCH_AT91 || AVR32) && SPI_MASTER
-+ help
-+ This selects a driver for the Atmel SPI Controller, present on
-+ many AT32 (AVR32) and AT91 (ARM) chips.
-+
- config SPI_BITBANG
- tristate "Bitbanging SPI master"
- depends on SPI_MASTER && EXPERIMENTAL
-@@ -75,6 +90,24 @@
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
-
-+config SPI_AT91
-+ tristate "AT91RM9200 Bitbang SPI Master"
-+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+ select SPI_BITBANG
-+ select SPI_AT91_MANUAL_CS
-+ help
-+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+ The SPI_ATMEL driver will be its replacement, using the native
-+ SPI hardware and its DMA controller.
-+
-+config SPI_AT91_MANUAL_CS
-+ bool
-+ depends on ARCH_AT91RM9200
-+ help
-+ Works around an AT91RM9200 problem whereby the SPI chip-select
-+ will be wrongly disabled. The workaround uses those pins as
-+ GPIOs instead of letting the SPI controller manage them.
-+
- config SPI_MPC83xx
- tristate "Freescale MPC83xx SPI controller"
- depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
-diff -urN linux-2.6.20.4-0rig/drivers/spi/Makefile linux-2.6.20.4-atmel/drivers/spi/Makefile
---- linux-2.6.20.4-0rig/drivers/spi/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/spi/Makefile 2007-03-24 16:39:15.000000000 +0100
-@@ -12,11 +12,14 @@
-
- # SPI master controller drivers (bus)
- obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
-+obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
- obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
- obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
-+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
-+obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
-diff -urN linux-2.6.20.4-0rig/drivers/spi/spi_at91_bitbang.c linux-2.6.20.4-atmel/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.20.4-0rig/drivers/spi/spi_at91_bitbang.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/spi/spi_at91_bitbang.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,207 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ * - other at91 parts (like at91sam9) have multiple controllers
-+ * and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ * - rm9200 spi chipselects drop wrongly, so the native driver
-+ * will need to use gpios much like this does.
-+ *
-+ * - real hardware only allows 8..16 bits per word, while this
-+ * bitbanger allows 1..32 (incompatible superset).
-+ *
-+ * - this disregards clock parameters. with inlined gpio calls,
-+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ * than using the subroutined veresion from txrx_word().
-+ *
-+ * - suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define spi_miso_bit AT91_PIN_PA0
-+#define spi_mosi_bit AT91_PIN_PA1
-+#define spi_sck_bit AT91_PIN_PA2
-+
-+struct at91_spi {
-+ struct spi_bitbang bitbang;
-+ struct platform_device *pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+ return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+ unsigned long cs = (unsigned long) spi->controller_data;
-+
-+ /* set default clock polarity */
-+ if (is_active)
-+ setsck(spi, spi->mode & SPI_CPOL);
-+
-+ /* only support active-low (default) */
-+ at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE: this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define spidelay(X) do{} while(0)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct spi_master *master;
-+ struct at91_spi *at91_spi;
-+
-+ if (pdev->id != 0) /* SPI0 bus */
-+ return -EINVAL;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+ if (!master)
-+ return -ENOMEM;
-+
-+ at91_spi = spi_master_get_devdata(master);
-+ at91_spi->pdev = pdev;
-+ platform_set_drvdata(pdev, at91_spi);
-+
-+ /* SPI and bitbang hookup */
-+ master->bus_num = 0;
-+ master->num_chipselect = 4;
-+
-+ at91_spi->bitbang.master = spi_master_get(master);
-+ at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+ status = spi_bitbang_start(&at91_spi->bitbang);
-+ if (status < 0)
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
-+ int status;
-+
-+ /* stop() unregisters child devices too */
-+ status = spi_bitbang_stop(&at91_spi->bitbang);
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+ .probe = at91_spi_probe,
-+ .remove = __exit_p(at91_spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+ at91_set_gpio_output(spi_sck_bit, 0);
-+ at91_set_gpio_output(spi_mosi_bit, 0);
-+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+ /* register driver */
-+ return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+ platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.c linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.c
---- linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.c 2007-03-24 16:39:15.000000000 +0100
-@@ -287,8 +287,8 @@
- ep->stopped = stopped;
-
- /* ep0 is always ready; other endpoints need a non-empty queue */
-- if (list_empty(&ep->queue) && ep->int_mask != (1 << 0))
-- at91_udp_write(udc, AT91_UDP_IDR, ep->int_mask);
-+ if (list_empty(&ep->queue) && (ep->id != 0))
-+ at91_udp_write(udc, AT91_UDP_IDR, 1 << ep->id);
- }
-
- /*-------------------------------------------------------------------------*/
-@@ -541,7 +541,7 @@
- * reset/init endpoint fifo. NOTE: leaves fifo_bank alone,
- * since endpoint resets don't reset hw pingpong state.
- */
-- at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask);
-+ at91_udp_write(dev, AT91_UDP_RST_EP, 1 << ep->id);
- at91_udp_write(dev, AT91_UDP_RST_EP, 0);
-
- local_irq_restore(flags);
-@@ -567,7 +567,7 @@
-
- /* reset fifos and endpoint */
- if (ep->udc->clocked) {
-- at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
-+ at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
- at91_udp_write(udc, AT91_UDP_RST_EP, 0);
- __raw_writel(0, ep->creg);
- }
-@@ -715,7 +715,7 @@
-
- if (req && !status) {
- list_add_tail (&req->queue, &ep->queue);
-- at91_udp_write(dev, AT91_UDP_IER, ep->int_mask);
-+ at91_udp_write(dev, AT91_UDP_IER, 1 << ep->id);
- }
- done:
- local_irq_restore(flags);
-@@ -774,7 +774,7 @@
- csr |= AT91_UDP_FORCESTALL;
- VDBG("halt %s\n", ep->ep.name);
- } else {
-- at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
-+ at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
- at91_udp_write(udc, AT91_UDP_RST_EP, 0);
- csr &= ~AT91_UDP_FORCESTALL;
- }
-@@ -913,14 +913,15 @@
- at91_udp_write(udc, AT91_UDP_TXVC, 0);
- if (cpu_is_at91rm9200())
- at91_set_gpio_value(udc->board.pullup_pin, 1);
-- else if (cpu_is_at91sam9260()) {
-+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
- u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
--
-+
- txvc |= AT91_UDP_TXVC_PUON;
- at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-- } else if (cpu_is_at91sam9261()) {
-+ }
-+ else if (cpu_is_at91sam9261()) {
- u32 usbpucr;
--
-+
- usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
- usbpucr |= AT91_MATRIX_USBPUCR_PUON;
- at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
-@@ -928,20 +929,20 @@
- } else {
- stop_activity(udc);
- at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
-- if (cpu_is_at91rm9200())
-- at91_set_gpio_value(udc->board.pullup_pin, 0);
-- else if (cpu_is_at91sam9260()) {
-- u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
--
-- txvc &= ~AT91_UDP_TXVC_PUON;
-- at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-- } else if (cpu_is_at91sam9261()) {
-- u32 usbpucr;
--
-- usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
-- usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
-- at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
-- }
-+ if (cpu_is_at91rm9200())
-+ at91_set_gpio_value(udc->board.pullup_pin, 0);
-+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
-+ u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-+
-+ txvc &= ~AT91_UDP_TXVC_PUON;
-+ at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-+ } else if (cpu_is_at91sam9261()) {
-+ u32 usbpucr;
-+
-+ usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
-+ usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
-+ at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
-+ }
- clk_off(udc);
- }
- }
-@@ -1228,7 +1229,7 @@
- } else if (ep->is_in)
- goto stall;
-
-- at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask);
-+ at91_udp_write(udc, AT91_UDP_RST_EP, 1 << ep->id);
- at91_udp_write(udc, AT91_UDP_RST_EP, 0);
- tmp = __raw_readl(ep->creg);
- tmp |= CLR_FX;
-@@ -1504,15 +1505,16 @@
- }
- },
- .ep[0] = {
-+ .id = 0,
- .ep = {
- .name = ep0name,
- .ops = &at91_ep_ops,
- },
- .udc = &controller,
- .maxpacket = 8,
-- .int_mask = 1 << 0,
- },
- .ep[1] = {
-+ .id = 1,
- .ep = {
- .name = "ep1",
- .ops = &at91_ep_ops,
-@@ -1520,9 +1522,9 @@
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 64,
-- .int_mask = 1 << 1,
- },
- .ep[2] = {
-+ .id = 2,
- .ep = {
- .name = "ep2",
- .ops = &at91_ep_ops,
-@@ -1530,9 +1532,9 @@
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 64,
-- .int_mask = 1 << 2,
- },
- .ep[3] = {
-+ .id = 3,
- .ep = {
- /* could actually do bulk too */
- .name = "ep3-int",
-@@ -1540,9 +1542,9 @@
- },
- .udc = &controller,
- .maxpacket = 8,
-- .int_mask = 1 << 3,
- },
- .ep[4] = {
-+ .id = 4,
- .ep = {
- .name = "ep4",
- .ops = &at91_ep_ops,
-@@ -1550,9 +1552,9 @@
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 256,
-- .int_mask = 1 << 4,
- },
- .ep[5] = {
-+ .id = 5,
- .ep = {
- .name = "ep5",
- .ops = &at91_ep_ops,
-@@ -1560,7 +1562,6 @@
- .udc = &controller,
- .is_pingpong = 1,
- .maxpacket = 256,
-- .int_mask = 1 << 5,
- },
- /* ep6 and ep7 are also reserved (custom silicon might use them) */
- };
-@@ -1679,9 +1680,7 @@
- if (!res)
- return -ENXIO;
-
-- if (!request_mem_region(res->start,
-- res->end - res->start + 1,
-- driver_name)) {
-+ if (!request_mem_region(res->start, res->end - res->start + 1, driver_name)) {
- DBG("someone's using UDC memory\n");
- return -EBUSY;
- }
-@@ -1807,16 +1806,13 @@
- || !wake
- || at91_suspend_entering_slow_clock()) {
- pullup(udc, 0);
-- disable_irq_wake(udc->udp_irq);
-+ wake = 0;
- } else
- enable_irq_wake(udc->udp_irq);
-
-- if (udc->board.vbus_pin > 0) {
-- if (wake)
-- enable_irq_wake(udc->board.vbus_pin);
-- else
-- disable_irq_wake(udc->board.vbus_pin);
-- }
-+ udc->active_suspend = wake;
-+ if (udc->board.vbus_pin > 0 && wake)
-+ enable_irq_wake(udc->board.vbus_pin);
- return 0;
- }
-
-@@ -1824,8 +1820,14 @@
- {
- struct at91_udc *udc = platform_get_drvdata(pdev);
-
-+ if (udc->board.vbus_pin > 0 && udc->active_suspend)
-+ disable_irq_wake(udc->board.vbus_pin);
-+
- /* maybe reconnect to host; if so, clocks on */
-- pullup(udc, 1);
-+ if (udc->active_suspend)
-+ disable_irq_wake(udc->udp_irq);
-+ else
-+ pullup(udc, 1);
- return 0;
- }
- #else
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.h linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.h
---- linux-2.6.20.4-0rig/drivers/usb/gadget/at91_udc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/at91_udc.h 2007-03-24 16:39:15.000000000 +0100
-@@ -105,10 +105,10 @@
- struct usb_ep ep;
- struct list_head queue;
- struct at91_udc *udc;
-+ u8 id;
- void __iomem *creg;
-
- unsigned maxpacket:16;
-- u8 int_mask;
- unsigned is_pingpong:1;
-
- unsigned stopped:1;
-@@ -136,6 +136,7 @@
- unsigned wait_for_addr_ack:1;
- unsigned wait_for_config_ack:1;
- unsigned selfpowered:1;
-+ unsigned active_suspend:1;
- u8 addr;
- struct at91_udc_data board;
- struct clk *iclk, *fclk;
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/ether.c linux-2.6.20.4-atmel/drivers/usb/gadget/ether.c
---- linux-2.6.20.4-0rig/drivers/usb/gadget/ether.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/ether.c 2007-03-24 16:42:28.000000000 +0100
-@@ -266,6 +266,10 @@
- #define DEV_CONFIG_CDC
- #endif
-
-+#ifdef CONFIG_USB_GADGET_HUSB2DEV
-+#define DEV_CONFIG_CDC
-+#endif
-+
-
- /* For CDC-incapable hardware, choose the simple cdc subset.
- * Anything that talks bulk (without notable bugs) can do this.
-@@ -428,7 +432,7 @@
- #define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */
-
- static struct usb_device_descriptor
--device_desc = {
-+device_desc __attribute__((aligned(2))) = {
- .bLength = sizeof device_desc,
- .bDescriptorType = USB_DT_DEVICE,
-
-@@ -454,7 +458,7 @@
- };
-
- static struct usb_config_descriptor
--eth_config = {
-+eth_config __attribute__((aligned(2))) = {
- .bLength = sizeof eth_config,
- .bDescriptorType = USB_DT_CONFIG,
-
-@@ -468,7 +472,7 @@
-
- #ifdef CONFIG_USB_ETH_RNDIS
- static struct usb_config_descriptor
--rndis_config = {
-+rndis_config __attribute__((aligned(2))) = {
- .bLength = sizeof rndis_config,
- .bDescriptorType = USB_DT_CONFIG,
-
-@@ -493,7 +497,7 @@
-
- #ifdef DEV_CONFIG_CDC
- static struct usb_interface_descriptor
--control_intf = {
-+control_intf __attribute__((aligned(2))) = {
- .bLength = sizeof control_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -509,7 +513,7 @@
-
- #ifdef CONFIG_USB_ETH_RNDIS
- static const struct usb_interface_descriptor
--rndis_control_intf = {
-+rndis_control_intf __attribute__((aligned(2))) = {
- .bLength = sizeof rndis_control_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -524,7 +528,7 @@
-
- #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-
--static const struct usb_cdc_header_desc header_desc = {
-+static const struct usb_cdc_header_desc __attribute__((aligned(2))) header_desc = {
- .bLength = sizeof header_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_HEADER_TYPE,
-@@ -566,7 +570,8 @@
-
- #ifdef DEV_CONFIG_CDC
-
--static const struct usb_cdc_ether_desc ether_desc = {
-+static const struct usb_cdc_ether_desc
-+ether_desc __attribute__((aligned(2))) = {
- .bLength = sizeof ether_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
-@@ -601,7 +606,7 @@
- #define STATUS_BYTECOUNT 16 /* 8 byte header + data */
-
- static struct usb_endpoint_descriptor
--fs_status_desc = {
-+fs_status_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -632,7 +637,7 @@
- /* ... but the "real" data interface has two bulk endpoints */
-
- static const struct usb_interface_descriptor
--data_intf = {
-+data_intf __attribute__((aligned(2))) = {
- .bLength = sizeof data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -652,7 +657,7 @@
- /* RNDIS doesn't activate by changing to the "real" altsetting */
-
- static const struct usb_interface_descriptor
--rndis_data_intf = {
-+rndis_data_intf __attribute__((aligned(2))) = {
- .bLength = sizeof rndis_data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -675,7 +680,7 @@
- */
-
- static const struct usb_interface_descriptor
--subset_data_intf = {
-+subset_data_intf __attribute__((aligned(2))) = {
- .bLength = sizeof subset_data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -692,7 +697,7 @@
-
-
- static struct usb_endpoint_descriptor
--fs_source_desc = {
-+fs_source_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -701,7 +706,7 @@
- };
-
- static struct usb_endpoint_descriptor
--fs_sink_desc = {
-+fs_sink_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -767,7 +772,7 @@
-
- #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- static struct usb_endpoint_descriptor
--hs_status_desc = {
-+hs_status_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -778,7 +783,7 @@
- #endif /* DEV_CONFIG_CDC */
-
- static struct usb_endpoint_descriptor
--hs_source_desc = {
-+hs_source_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -787,7 +792,7 @@
- };
-
- static struct usb_endpoint_descriptor
--hs_sink_desc = {
-+hs_sink_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -796,7 +801,7 @@
- };
-
- static struct usb_qualifier_descriptor
--dev_qualifier = {
-+dev_qualifier __attribute__((aligned(2))) = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/file_storage.c linux-2.6.20.4-atmel/drivers/usb/gadget/file_storage.c
---- linux-2.6.20.4-0rig/drivers/usb/gadget/file_storage.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/file_storage.c 2007-03-24 16:42:28.000000000 +0100
-@@ -854,7 +854,7 @@
- #define CONFIG_VALUE 1
-
- static struct usb_device_descriptor
--device_desc = {
-+device_desc __attribute__((aligned(2))) = {
- .bLength = sizeof device_desc,
- .bDescriptorType = USB_DT_DEVICE,
-
-@@ -873,7 +873,7 @@
- };
-
- static struct usb_config_descriptor
--config_desc = {
-+config_desc __attribute__((aligned(2))) = {
- .bLength = sizeof config_desc,
- .bDescriptorType = USB_DT_CONFIG,
-
-@@ -896,7 +896,7 @@
- /* There is only one interface. */
-
- static struct usb_interface_descriptor
--intf_desc = {
-+intf_desc __attribute__((aligned(2))) = {
- .bLength = sizeof intf_desc,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -911,7 +911,7 @@
- * and interrupt-in. */
-
- static struct usb_endpoint_descriptor
--fs_bulk_in_desc = {
-+fs_bulk_in_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -921,7 +921,7 @@
- };
-
- static struct usb_endpoint_descriptor
--fs_bulk_out_desc = {
-+fs_bulk_out_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -931,7 +931,7 @@
- };
-
- static struct usb_endpoint_descriptor
--fs_intr_in_desc = {
-+fs_intr_in_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -963,7 +963,7 @@
- * for the config descriptor.
- */
- static struct usb_qualifier_descriptor
--dev_qualifier = {
-+dev_qualifier __attribute__((aligned(2))) = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
-@@ -974,7 +974,7 @@
- };
-
- static struct usb_endpoint_descriptor
--hs_bulk_in_desc = {
-+hs_bulk_in_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -984,7 +984,7 @@
- };
-
- static struct usb_endpoint_descriptor
--hs_bulk_out_desc = {
-+hs_bulk_out_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -995,7 +995,7 @@
- };
-
- static struct usb_endpoint_descriptor
--hs_intr_in_desc = {
-+hs_intr_in_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/gadget_chips.h linux-2.6.20.4-atmel/drivers/usb/gadget/gadget_chips.h
---- linux-2.6.20.4-0rig/drivers/usb/gadget/gadget_chips.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/gadget_chips.h 2007-03-24 16:42:29.000000000 +0100
-@@ -75,6 +75,12 @@
- #define gadget_is_pxa27x(g) 0
- #endif
-
-+#ifdef CONFIG_USB_GADGET_HUSB2DEV
-+#define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name)
-+#else
-+#define gadget_is_husb2dev(g) 0
-+#endif
-+
- #ifdef CONFIG_USB_GADGET_S3C2410
- #define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name)
- #else
-@@ -169,5 +175,7 @@
- return 0x16;
- else if (gadget_is_mpc8272(gadget))
- return 0x17;
-+ else if (gadget_is_husb2dev(gadget))
-+ return 0x80;
- return -ENOENT;
- }
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.c linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.c
---- linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,1997 @@
-+/*
-+ * Driver for the Atmel HUSB2device high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#undef DEBUG
-+
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/list.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb_ch9.h>
-+#include <linux/usb_gadget.h>
-+#include <linux/dmapool.h>
-+#include <linux/delay.h>
-+
-+#include <asm/io.h>
-+
-+#include "husb2_udc.h"
-+
-+#define DRIVER_VERSION "0.9"
-+
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+
-+#define FIFO_IOMEM_ID 0
-+#define CTRL_IOMEM_ID 1
-+
-+#ifdef DEBUG
-+#define DBG_ERR 0x0001 /* report all error returns */
-+#define DBG_HW 0x0002 /* debug hardware initialization */
-+#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
-+#define DBG_INT 0x0008 /* interrupts */
-+#define DBG_BUS 0x0010 /* report changes in bus state */
-+#define DBG_QUEUE 0x0020 /* debug request queue processing */
-+#define DBG_FIFO 0x0040 /* debug FIFO contents */
-+#define DBG_DMA 0x0080 /* debug DMA handling */
-+#define DBG_REQ 0x0100 /* print out queued request length */
-+#define DBG_ALL 0xffff
-+#define DBG_NONE 0x0000
-+
-+#define DEBUG_LEVEL (DBG_ERR|DBG_REQ)
-+#define DBG(level, fmt, ...) \
-+ do { \
-+ if ((level) & DEBUG_LEVEL) \
-+ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
-+ } while (0)
-+#else
-+#define DBG(level, fmt...)
-+#endif
-+
-+static struct husb2_udc the_udc;
-+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
-+#include <asm/uaccess.h>
-+
-+static int queue_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct husb2_ep *ep = inode->i_private;
-+ struct husb2_request *req, *req_copy;
-+ struct list_head *queue_data;
-+
-+ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
-+ if (!queue_data)
-+ return -ENOMEM;
-+ INIT_LIST_HEAD(queue_data);
-+
-+ spin_lock_irq(&ep->udc->lock);
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
-+ if (!req_copy)
-+ goto fail;
-+ memcpy(req_copy, req, sizeof(*req_copy));
-+ list_add_tail(&req_copy->queue, queue_data);
-+ }
-+ spin_unlock_irq(&ep->udc->lock);
-+
-+ file->private_data = queue_data;
-+ return 0;
-+
-+fail:
-+ spin_unlock_irq(&ep->udc->lock);
-+ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
-+ list_del(&req->queue);
-+ kfree(req);
-+ }
-+ kfree(queue_data);
-+ return -ENOMEM;
-+}
-+
-+/*
-+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
-+ *
-+ * b: buffer address
-+ * l: buffer length
-+ * I/i: interrupt/no interrupt
-+ * Z/z: zero/no zero
-+ * S/s: short ok/short not ok
-+ * s: status
-+ * n: nr_packets
-+ * F/f: submitted/not submitted to FIFO
-+ * D/d: using/not using DMA
-+ * L/l: last transaction/not last transaction
-+ */
-+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct list_head *queue = file->private_data;
-+ struct husb2_request *req, *tmp_req;
-+ size_t len, remaining, actual = 0;
-+ char tmpbuf[38];
-+
-+ if (!access_ok(VERIFY_WRITE, buf, nbytes))
-+ return -EFAULT;
-+
-+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
-+ list_for_each_entry_safe(req, tmp_req, queue, queue) {
-+ len = snprintf(tmpbuf, sizeof(tmpbuf),
-+ "%8p %08x %c%c%c %5d %4u %c%c%c\n",
-+ req->req.buf, req->req.length,
-+ req->req.no_interrupt ? 'i' : 'I',
-+ req->req.zero ? 'Z' : 'z',
-+ req->req.short_not_ok ? 's' : 'S',
-+ req->req.status,
-+ req->nr_pkts,
-+ req->submitted ? 'F' : 'f',
-+ req->using_dma ? 'D' : 'd',
-+ req->last_transaction ? 'L' : 'l');
-+ len = min(len, sizeof(tmpbuf));
-+ if (len > nbytes)
-+ break;
-+
-+ list_del(&req->queue);
-+ kfree(req);
-+
-+ remaining = __copy_to_user(buf, tmpbuf, len);
-+ actual += len - remaining;
-+ if (remaining)
-+ break;
-+
-+ nbytes -= len;
-+ buf += len;
-+ }
-+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
-+
-+ return actual;
-+}
-+
-+static int queue_dbg_release(struct inode *inode, struct file *file)
-+{
-+ struct list_head *queue_data = file->private_data;
-+ struct husb2_request *req, *tmp_req;
-+
-+ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
-+ list_del(&req->queue);
-+ kfree(req);
-+ }
-+ kfree(queue_data);
-+ return 0;
-+}
-+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct husb2_udc *udc;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
-+
-+ mutex_lock(&inode->i_mutex);
-+ udc = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
-+
-+ spin_lock_irq(&udc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(udc->regs + i * 4);
-+ spin_unlock_irq(&udc->lock);
-+
-+ file->private_data = data;
-+ ret = 0;
-+
-+out:
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
-+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
-+
-+ return ret;
-+}
-+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
-+ return 0;
-+}
-+
-+const struct file_operations queue_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = queue_dbg_open,
-+ .llseek = no_llseek,
-+ .read = queue_dbg_read,
-+ .release = queue_dbg_release,
-+};
-+
-+const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
-+
-+static void husb2_ep_init_debugfs(struct husb2_udc *udc,
-+ struct husb2_ep *ep)
-+{
-+ struct dentry *ep_root;
-+
-+ ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
-+ if (!ep_root)
-+ goto err_root;
-+ ep->debugfs_dir = ep_root;
-+
-+ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
-+ ep, &queue_dbg_fops);
-+ if (!ep->debugfs_queue)
-+ goto err_queue;
-+
-+ if (ep_can_dma(ep)) {
-+ ep->debugfs_dma_status
-+ = debugfs_create_u32("dma_status", 0400, ep_root,
-+ &ep->last_dma_status);
-+ if (!ep->debugfs_dma_status)
-+ goto err_dma_status;
-+ }
-+
-+ return;
-+
-+err_dma_status:
-+ debugfs_remove(ep->debugfs_queue);
-+err_queue:
-+ debugfs_remove(ep_root);
-+err_root:
-+ dev_err(&ep->udc->pdev->dev,
-+ "failed to create debugfs directory for %s\n", ep_name(ep));
-+}
-+
-+static void husb2_ep_cleanup_debugfs(struct husb2_ep *ep)
-+{
-+ debugfs_remove(ep->debugfs_queue);
-+ debugfs_remove(ep->debugfs_dma_status);
-+ debugfs_remove(ep->debugfs_dir);
-+ ep->debugfs_dma_status = NULL;
-+ ep->debugfs_dir = NULL;
-+}
-+
-+static void husb2_init_debugfs(struct husb2_udc *udc)
-+{
-+ struct dentry *root, *regs;
-+ struct resource *regs_resource;
-+
-+ root = debugfs_create_dir(udc->gadget.name, NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ udc->debugfs_root = root;
-+
-+ regs = debugfs_create_file("regs", 0400, root, udc, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
-+ CTRL_IOMEM_ID);
-+ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
-+ udc->debugfs_regs = regs;
-+
-+ husb2_ep_init_debugfs(udc, to_husb2_ep(udc->gadget.ep0));
-+
-+ return;
-+
-+err_regs:
-+ debugfs_remove(root);
-+err_root:
-+ udc->debugfs_root = NULL;
-+ dev_err(&udc->pdev->dev, "debugfs is not available\n");
-+}
-+
-+static void husb2_cleanup_debugfs(struct husb2_udc *udc)
-+{
-+ husb2_ep_cleanup_debugfs(to_husb2_ep(udc->gadget.ep0));
-+ debugfs_remove(udc->debugfs_regs);
-+ debugfs_remove(udc->debugfs_root);
-+ udc->debugfs_regs = NULL;
-+ udc->debugfs_root = NULL;
-+}
-+#else
-+static inline void husb2_ep_init_debugfs(struct husb2_udc *udc,
-+ struct husb2_ep *ep)
-+{
-+
-+}
-+
-+static inline void husb2_ep_cleanup_debugfs(struct husb2_ep *ep)
-+{
-+
-+}
-+
-+static inline void husb2_init_debugfs(struct husb2_udc *udc)
-+{
-+
-+}
-+
-+static inline void husb2_cleanup_debugfs(struct husb2_udc *udc)
-+{
-+
-+}
-+#endif
-+
-+static void copy_to_fifo(void __iomem *fifo, void *buf, int len)
-+{
-+ unsigned long tmp;
-+
-+ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-+ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-+ tmp = *(unsigned long *)buf;
-+ if (len >= 4) {
-+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
-+ __raw_writel(tmp, fifo);
-+ } else {
-+ do {
-+ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
-+ __raw_writeb(tmp >> 24, fifo);
-+ fifo++;
-+ tmp <<= 8;
-+ } while (--len);
-+ break;
-+ }
-+ }
-+}
-+
-+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
-+{
-+ union {
-+ unsigned long *w;
-+ unsigned char *b;
-+ } p;
-+ unsigned long tmp;
-+
-+ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-+ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-+ if (len >= 4) {
-+ tmp = __raw_readl(fifo);
-+ *p.w = tmp;
-+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
-+ } else {
-+ do {
-+ tmp = __raw_readb(fifo);
-+ *p.b = tmp;
-+ DBG(DBG_FIFO, " -> %02lx\n", tmp);
-+ fifo++, p.b++;
-+ } while (--len);
-+ }
-+ }
-+}
-+
-+static void next_fifo_transaction(struct husb2_ep *ep,
-+ struct husb2_request *req)
-+{
-+ unsigned int transaction_len;
-+
-+ transaction_len = req->req.length - req->req.actual;
-+ req->last_transaction = 1;
-+ if (transaction_len > ep->ep.maxpacket) {
-+ transaction_len = ep->ep.maxpacket;
-+ req->last_transaction = 0;
-+ } else if (transaction_len == ep->ep.maxpacket
-+ && req->req.zero) {
-+ req->last_transaction = 0;
-+ }
-+ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
-+ ep_name(ep), req, transaction_len,
-+ req->last_transaction ? ", done" : "");
-+
-+ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
-+ req->req.actual += transaction_len;
-+}
-+
-+static void submit_request(struct husb2_ep *ep, struct husb2_request *req)
-+{
-+ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
-+ ep_name(ep), req, req->req.length);
-+
-+ req->req.actual = 0;
-+ req->submitted = 1;
-+
-+ if (req->using_dma) {
-+ if (req->req.length == 0) {
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
-+ } else {
-+ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
-+ husb2_dma_writel(ep, NXT_DSC,
-+ req->packet[0].desc_dma);
-+ husb2_dma_writel(ep, CONTROL, HUSB2_BIT(DMA_LINK));
-+ }
-+ } else {
-+ next_fifo_transaction(ep, req);
-+ if (req->last_transaction)
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
-+ else
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
-+ }
-+}
-+
-+static void submit_next_request(struct husb2_ep *ep)
-+{
-+ struct husb2_request *req;
-+
-+ if (list_empty(&ep->queue)) {
-+ husb2_ep_writel(ep, CTL_DIS, (HUSB2_BIT(TX_PK_RDY)
-+ | HUSB2_BIT(RX_BK_RDY)));
-+ return;
-+ }
-+
-+ req = list_entry(ep->queue.next, struct husb2_request, queue);
-+ if (!req->submitted)
-+ submit_request(ep, req);
-+}
-+
-+static void send_status(struct husb2_udc *udc, struct husb2_ep *ep)
-+{
-+ ep->state = STATUS_STAGE_IN;
-+ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
-+}
-+
-+static void receive_data(struct husb2_ep *ep)
-+{
-+ struct husb2_udc *udc = ep->udc;
-+ struct husb2_request *req;
-+ unsigned long status;
-+ unsigned int bytecount, nr_busy;
-+ int is_complete = 0;
-+
-+ status = husb2_ep_readl(ep, STA);
-+ nr_busy = HUSB2_BFEXT(BUSY_BANKS, status);
-+
-+ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
-+
-+ while (nr_busy > 0) {
-+ if (list_empty(&ep->queue)) {
-+ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(RX_BK_RDY));
-+ break;
-+ }
-+ req = list_entry(ep->queue.next,
-+ struct husb2_request, queue);
-+
-+ bytecount = HUSB2_BFEXT(BYTE_COUNT, status);
-+
-+ if (status & (1 << 31))
-+ is_complete = 1;
-+ if (req->req.actual + bytecount >= req->req.length) {
-+ is_complete = 1;
-+ bytecount = req->req.length - req->req.actual;
-+ }
-+
-+ copy_from_fifo(req->req.buf + req->req.actual,
-+ ep->fifo, bytecount);
-+ req->req.actual += bytecount;
-+
-+ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
-+
-+ if (is_complete) {
-+ DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
-+ req->req.status = 0;
-+ list_del_init(&req->queue);
-+ req->req.complete(&ep->ep, &req->req);
-+ }
-+
-+ status = husb2_ep_readl(ep, STA);
-+ nr_busy = HUSB2_BFEXT(BUSY_BANKS, status);
-+
-+ if (is_complete && ep_is_control(ep)) {
-+ BUG_ON(nr_busy != 0);
-+ send_status(udc, ep);
-+ break;
-+ }
-+ }
-+}
-+
-+static void request_complete(struct husb2_ep *ep,
-+ struct husb2_request *req,
-+ int status)
-+{
-+ struct husb2_udc *udc = ep->udc;
-+ int i;
-+
-+ BUG_ON(!list_empty(&req->queue));
-+
-+ if (req->req.status == -EINPROGRESS)
-+ req->req.status = status;
-+
-+ if (req->packet) {
-+ for (i = 0; i < req->nr_pkts; i++)
-+ dma_pool_free(udc->desc_pool, req->packet[i].desc,
-+ req->packet[i].desc_dma);
-+ kfree(req->packet);
-+ req->packet = NULL;
-+ dma_unmap_single(&udc->pdev->dev,
-+ req->req.dma, req->req.length,
-+ (ep_is_in(ep)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
-+ req->req.dma = DMA_ADDR_INVALID;
-+ }
-+
-+ DBG(DBG_GADGET | DBG_REQ,
-+ "%s: req %p complete: status %d, actual %u\n",
-+ ep_name(ep), req, req->req.status, req->req.actual);
-+ req->req.complete(&ep->ep, &req->req);
-+}
-+
-+static void request_complete_list(struct husb2_ep *ep,
-+ struct list_head *list,
-+ int status)
-+{
-+ struct husb2_request *req, *tmp_req;
-+
-+ list_for_each_entry_safe(req, tmp_req, list, queue) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, status);
-+ }
-+}
-+
-+static int husb2_ep_enable(struct usb_ep *_ep,
-+ const struct usb_endpoint_descriptor *desc)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ struct husb2_udc *udc = ep->udc;
-+ unsigned long flags, ept_cfg, maxpacket;
-+
-+ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
-+
-+ maxpacket = le16_to_cpu(desc->wMaxPacketSize);
-+
-+ if (ep->index == 0
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-+ != ep->index)
-+ || maxpacket == 0
-+ || maxpacket > ep->fifo_size) {
-+ DBG(DBG_ERR, "ep_enable: Invalid argument");
-+ return -EINVAL;
-+ }
-+
-+ if (((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-+ == USB_ENDPOINT_XFER_ISOC)
-+ && !(ep->capabilities & HUSB2_EP_CAP_ISOC)) {
-+ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
-+ ep_name(ep));
-+ return -EINVAL;
-+ }
-+
-+ if (maxpacket <= 8)
-+ ept_cfg = HUSB2_BF(EPT_SIZE, HUSB2_EPT_SIZE_8);
-+ else
-+ /* LSB is bit 1, not 0 */
-+ ept_cfg = HUSB2_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
-+ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
-+ ep_name(ep), ept_cfg, maxpacket);
-+
-+ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
-+ ept_cfg |= HUSB2_BIT(EPT_DIR);
-+
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_CONTROL);
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_ISO);
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_BULK);
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ ept_cfg |= HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_INT);
-+ break;
-+ }
-+ ept_cfg |= HUSB2_BF(BK_NUMBER, ep->nr_banks);
-+
-+ spin_lock_irqsave(&ep->udc->lock, flags);
-+
-+ if (ep->desc) {
-+ spin_unlock_irqrestore(&ep->udc->lock, flags);
-+ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-+ return -EBUSY;
-+ }
-+
-+ ep->desc = desc;
-+ ep->ep.maxpacket = maxpacket;
-+
-+ husb2_ep_writel(ep, CFG, ept_cfg);
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(EPT_ENABLE));
-+
-+ if (ep_can_dma(ep)) {
-+ husb2_writel(udc, INT_ENB,
-+ (husb2_readl(udc, INT_ENB)
-+ | HUSB2_BF(EPT_INT, 1 << ep->index)
-+ | HUSB2_BF(DMA_INT, 1 << ep->index)));
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(AUTO_VALID));
-+ } else {
-+ husb2_writel(udc, INT_ENB,
-+ (husb2_readl(udc, INT_ENB)
-+ | HUSB2_BF(EPT_INT, 1 << ep->index)));
-+ }
-+
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
-+ (unsigned long)husb2_ep_readl(ep, CFG));
-+ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
-+ (unsigned long)husb2_readl(udc, INT_ENB));
-+
-+ husb2_ep_init_debugfs(udc, ep);
-+
-+ return 0;
-+}
-+
-+static int husb2_ep_disable(struct usb_ep *_ep)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ struct husb2_udc *udc = ep->udc;
-+ LIST_HEAD(req_list);
-+ unsigned long flags;
-+
-+ DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
-+
-+ husb2_ep_cleanup_debugfs(ep);
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+
-+ if (!ep->desc) {
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+ DBG(DBG_ERR, "ep_disable: %s not enabled\n",
-+ ep_name(ep));
-+ return -EINVAL;
-+ }
-+ ep->desc = NULL;
-+
-+ list_splice_init(&ep->queue, &req_list);
-+ if (ep_can_dma(ep)) {
-+ husb2_dma_writel(ep, CONTROL, 0);
-+ husb2_dma_writel(ep, ADDRESS, 0);
-+ husb2_dma_readl(ep, STATUS);
-+ }
-+ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(EPT_ENABLE));
-+ husb2_writel(udc, INT_ENB, (husb2_readl(udc, INT_ENB)
-+ & ~HUSB2_BF(EPT_INT, 1 << ep->index)));
-+
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ request_complete_list(ep, &req_list, -ESHUTDOWN);
-+
-+ return 0;
-+}
-+
-+static struct usb_request *
-+husb2_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
-+{
-+ struct husb2_request *req;
-+
-+ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
-+
-+ req = kzalloc(sizeof(*req), gfp_flags);
-+ if (!req)
-+ return NULL;
-+
-+ INIT_LIST_HEAD(&req->queue);
-+ req->req.dma = DMA_ADDR_INVALID;
-+
-+ return &req->req;
-+}
-+
-+static void
-+husb2_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct husb2_request *req = to_husb2_req(_req);
-+
-+ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
-+
-+ kfree(req);
-+}
-+
-+static void *husb2_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
-+ dma_addr_t *dma, unsigned gfp_flags)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ void *buf;
-+
-+ /*
-+ * We depend on kmalloc() returning cache-aligned memory. This
-+ * is normally guaranteed as long as we allocate a whole
-+ * cacheline or more.
-+ *
-+ * When CONFIG_DEBUG_SLAB is enabled, however, the slab
-+ * allocator inserts red zones and ownership information,
-+ * causing the slab objects to be misaligned.
-+ *
-+ * One alternative would be to use dma_alloc_coherent, but
-+ * that would make us unable to allocate anything less than a
-+ * page at a time.
-+ */
-+#ifdef CONFIG_DEBUG_SLAB
-+# error The HUSB2 UDC driver breaks with SLAB debugging enabled
-+#endif
-+
-+ if (bytes < L1_CACHE_BYTES)
-+ bytes = L1_CACHE_BYTES;
-+
-+ buf = kmalloc(bytes, gfp_flags);
-+
-+ /*
-+ * Seems like we have to map the buffer any chance we get.
-+ * ether.c wants us to initialize the dma member of a
-+ * different request than the one receiving the buffer, so one
-+ * never knows...
-+ *
-+ * Ah, screw it. The ether driver is probably wrong, and this
-+ * is not the right place to do the mapping. The driver
-+ * shouldn't mess with our DMA mappings anyway.
-+ */
-+ *dma = DMA_ADDR_INVALID;
-+
-+ DBG(DBG_GADGET, "ep_alloc_buffer: %s, %u, 0x%x -> %p\n",
-+ ep_name(ep), bytes, gfp_flags, buf);
-+
-+ return buf;
-+}
-+
-+static void husb2_ep_free_buffer(struct usb_ep *_ep, void *buf,
-+ dma_addr_t dma, unsigned bytes)
-+{
-+ DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
-+ _ep->name, buf, bytes);
-+ kfree(buf);
-+}
-+
-+static int queue_dma(struct husb2_udc *udc, struct husb2_ep *ep,
-+ struct husb2_request *req, unsigned int direction,
-+ gfp_t gfp_flags)
-+{
-+ struct husb2_packet *pkt, *prev_pkt;
-+ unsigned int pkt_size, nr_pkts, i;
-+ unsigned int residue;
-+ dma_addr_t addr;
-+ unsigned long flags;
-+ u32 ctrl;
-+
-+ req->using_dma = 1;
-+
-+ if (req->req.length == 0) {
-+ if (!req->req.zero)
-+ return -EINVAL;
-+ req->send_zlp = 1;
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
-+ list_add_tail(&req->queue, &ep->queue);
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ return 0;
-+ }
-+
-+ if (req->req.dma == DMA_ADDR_INVALID)
-+ req->req.dma = dma_map_single(&udc->pdev->dev,
-+ req->req.buf,
-+ req->req.length,
-+ direction);
-+ else
-+ dma_sync_single_for_device(&udc->pdev->dev,
-+ req->req.dma,
-+ req->req.length,
-+ direction);
-+
-+ pkt_size = ep->ep.maxpacket;
-+ nr_pkts = req->req.length / pkt_size;
-+ residue = req->req.length % pkt_size;
-+ if (residue != 0)
-+ nr_pkts++;
-+ else if (req->req.zero && ep_is_in(ep))
-+ /* ensure last packet is short */
-+ req->send_zlp = 1;
-+
-+ req->nr_pkts = nr_pkts;
-+
-+ req->packet = kzalloc(sizeof(*req->packet) * nr_pkts, gfp_flags);
-+ if (!req->packet)
-+ goto out_of_memory;
-+
-+ addr = req->req.dma;
-+ ctrl = (HUSB2_BF(DMA_BUF_LEN, pkt_size)
-+ | HUSB2_BIT(DMA_CH_EN) | HUSB2_BIT(DMA_LINK)
-+ | HUSB2_BIT(DMA_END_TR_EN) | HUSB2_BIT(DMA_END_TR_IE));
-+ prev_pkt = NULL;
-+ pkt = NULL;
-+ DBG(DBG_DMA, "DMA descriptors:\n");
-+ for (i = 0; i < nr_pkts; i++) {
-+ pkt = &req->packet[i];
-+ pkt->desc = dma_pool_alloc(udc->desc_pool, gfp_flags,
-+ &pkt->desc_dma);
-+ if (!pkt->desc)
-+ goto out_of_memory;
-+
-+ if (prev_pkt) {
-+ prev_pkt->desc->next = pkt->desc_dma;
-+ DBG(DBG_DMA, "[%d] n%08x a%08x c%08x\n",
-+ i - 1, prev_pkt->desc->next, prev_pkt->desc->addr,
-+ prev_pkt->desc->ctrl);
-+ }
-+ prev_pkt = pkt;
-+
-+ pkt->desc->addr = addr;
-+ pkt->desc->ctrl = ctrl;
-+ addr += pkt_size;
-+ }
-+
-+ /* special care is needed for the last packet... */
-+ ctrl = (HUSB2_BIT(DMA_CH_EN)
-+ | HUSB2_BIT(DMA_END_TR_EN) | HUSB2_BIT(DMA_END_TR_IE)
-+ | HUSB2_BIT(DMA_END_BUF_IE));
-+ if (ep_is_in(ep))
-+ ctrl |= HUSB2_BIT(DMA_END_BUF_EN);
-+ if (req->req.zero || residue)
-+ ctrl |= HUSB2_BF(DMA_BUF_LEN, residue);
-+ else
-+ ctrl |= HUSB2_BF(DMA_BUF_LEN, pkt_size);
-+ pkt->desc->ctrl = ctrl;
-+
-+ DBG(DBG_DMA, "[%d] n%08x a%08x c%08x\n",
-+ i - 1, prev_pkt->desc->next, prev_pkt->desc->addr,
-+ prev_pkt->desc->ctrl);
-+
-+ /* Add this request to the queue and try to chain the DMA descriptors */
-+ spin_lock_irqsave(&udc->lock, flags);
-+
-+ /* If the DMA controller is idle, start it */
-+ if (list_empty(&ep->queue)) {
-+ husb2_dma_writel(ep, NXT_DSC, req->packet[0].desc_dma);
-+ husb2_dma_writel(ep, CONTROL, HUSB2_BIT(DMA_LINK));
-+ }
-+
-+ list_add_tail(&req->queue, &ep->queue);
-+
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ return 0;
-+
-+out_of_memory:
-+ printk(KERN_ERR "ERROR: Could not allocate DMA memory for endpoint %s\n",
-+ ep_name(ep));
-+ if (req->packet) {
-+ for (i = 0; i < nr_pkts; i++)
-+ if (req->packet[i].desc)
-+ dma_pool_free(udc->desc_pool,
-+ req->packet[i].desc,
-+ req->packet[i].desc_dma);
-+ kfree(req->packet);
-+ }
-+
-+ return -ENOMEM;
-+}
-+
-+static int husb2_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
-+ gfp_t gfp_flags)
-+{
-+ struct husb2_request *req = to_husb2_req(_req);
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ struct husb2_udc *udc = ep->udc;
-+ unsigned long flags;
-+ int direction_in = 0;
-+
-+ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
-+ "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
-+
-+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
-+ return -ESHUTDOWN;
-+ if (!ep->desc)
-+ return -ENODEV;
-+
-+ req->nr_pkts = 0;
-+ req->submitted = 0;
-+ req->using_dma = 0;
-+ req->last_transaction = 0;
-+ req->send_zlp = 0;
-+
-+ BUG_ON(req->packet);
-+
-+ if (ep_is_in(ep)
-+ || (ep_is_control(ep) && (ep->state == DATA_STAGE_IN
-+ || ep->state == STATUS_STAGE_IN)))
-+ direction_in = 1;
-+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
-+
-+ if (ep_can_dma(ep)) {
-+ return queue_dma(udc, ep, req, (direction_in
-+ ? DMA_TO_DEVICE
-+ : DMA_FROM_DEVICE),
-+ gfp_flags);
-+ } else {
-+ spin_lock_irqsave(&udc->lock, flags);
-+ list_add_tail(&req->queue, &ep->queue);
-+
-+ if (direction_in)
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
-+ else
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(RX_BK_RDY));
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+ }
-+
-+ return 0;
-+}
-+
-+static void husb2_update_req(struct husb2_ep *ep, struct husb2_request *req,
-+ u32 status)
-+{
-+ struct husb2_dma_desc *desc;
-+ dma_addr_t from;
-+ dma_addr_t addr;
-+ size_t size;
-+ unsigned int i;
-+
-+ addr = husb2_dma_readl(ep, ADDRESS);
-+ req->req.actual = 0;
-+
-+ for (i = 0; i < req->nr_pkts; i++) {
-+ desc = req->packet[i].desc;
-+ from = desc->addr;
-+ size = HUSB2_BFEXT(DMA_BUF_LEN, desc->ctrl);
-+
-+ req->req.actual += size;
-+
-+ DBG(DBG_DMA, " from=%#08x, size=%#zx\n", from, size);
-+
-+ if (from <= addr && (from + size) >= addr)
-+ break;
-+ }
-+
-+ req->req.actual -= HUSB2_BFEXT(DMA_BUF_LEN, status);
-+}
-+
-+static int stop_dma(struct husb2_ep *ep, u32 *pstatus)
-+{
-+ unsigned int timeout;
-+ u32 status;
-+
-+ /*
-+ * Stop the DMA controller. When writing both CH_EN
-+ * and LINK to 0, the other bits are not affected.
-+ */
-+ husb2_dma_writel(ep, CONTROL, 0);
-+
-+ /* Wait for the FIFO to empty */
-+ for (timeout = 40; timeout; --timeout) {
-+ status = husb2_dma_readl(ep, STATUS);
-+ if (!(status & HUSB2_BIT(DMA_CH_EN)))
-+ break;
-+ udelay(1);
-+ }
-+
-+ if (pstatus)
-+ *pstatus = status;
-+
-+ if (timeout == 0) {
-+ dev_err(&ep->udc->pdev->dev,
-+ "%s: timed out waiting for DMA FIFO to empty\n",
-+ ep_name(ep));
-+ return -ETIMEDOUT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int husb2_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ struct husb2_udc *udc = ep->udc;
-+ struct husb2_request *req = to_husb2_req(_req);
-+ unsigned long flags;
-+ u32 status;
-+
-+ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", ep_name(ep), req);
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+
-+ if (req->using_dma) {
-+ /*
-+ * If this request is currently being transferred,
-+ * stop the DMA controller and reset the FIFO.
-+ */
-+ if (ep->queue.next == &req->queue) {
-+ status = husb2_dma_readl(ep, STATUS);
-+ if (status & HUSB2_BIT(DMA_CH_EN))
-+ stop_dma(ep, &status);
-+
-+#ifdef CONFIG_DEBUG_FS
-+ ep->last_dma_status = status;
-+#endif
-+
-+ husb2_writel(udc, EPT_RST,
-+ 1 << ep_index(ep));
-+
-+ husb2_update_req(ep, req, status);
-+ }
-+ }
-+
-+ /*
-+ * Errors should stop the queue from advancing until the
-+ * completion function returns.
-+ */
-+ list_del_init(&req->queue);
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ request_complete(ep, req, -ECONNRESET);
-+
-+ /* Process the next request if any */
-+ spin_lock_irqsave(&udc->lock, flags);
-+ submit_next_request(ep);
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int husb2_ep_set_halt(struct usb_ep *_ep, int value)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ struct husb2_udc *udc = ep->udc;
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
-+ value ? "set" : "clear");
-+
-+ if (!ep->desc) {
-+ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
-+ ep_name(ep));
-+ return -ENODEV;
-+ }
-+ if (ep_is_isochronous(ep)) {
-+ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
-+ ep_name(ep));
-+ return -ENOTTY;
-+ }
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+
-+ /*
-+ * We can't halt IN endpoints while there are still data to be
-+ * transferred
-+ */
-+ if (!list_empty(&ep->queue)
-+ || ((value && ep_is_in(ep)
-+ && (husb2_ep_readl(ep, STA)
-+ & HUSB2_BF(BUSY_BANKS, -1L))))) {
-+ ret = -EAGAIN;
-+ } else {
-+ if (value)
-+ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(FORCE_STALL));
-+ else
-+ husb2_ep_writel(ep, CLR_STA, (HUSB2_BIT(FORCE_STALL)
-+ | HUSB2_BIT(TOGGLE_SEQ)));
-+ husb2_ep_readl(ep, STA);
-+ }
-+
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ return ret;
-+}
-+
-+static int husb2_ep_fifo_status(struct usb_ep *_ep)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+
-+ return HUSB2_BFEXT(BYTE_COUNT, husb2_ep_readl(ep, STA));
-+}
-+
-+static void husb2_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct husb2_ep *ep = to_husb2_ep(_ep);
-+ struct husb2_udc *udc = ep->udc;
-+
-+ husb2_writel(udc, EPT_RST, 1 << ep->index);
-+}
-+
-+struct usb_ep_ops husb2_ep_ops = {
-+ .enable = husb2_ep_enable,
-+ .disable = husb2_ep_disable,
-+ .alloc_request = husb2_ep_alloc_request,
-+ .free_request = husb2_ep_free_request,
-+ .alloc_buffer = husb2_ep_alloc_buffer,
-+ .free_buffer = husb2_ep_free_buffer,
-+ .queue = husb2_ep_queue,
-+ .dequeue = husb2_ep_dequeue,
-+ .set_halt = husb2_ep_set_halt,
-+ .fifo_status = husb2_ep_fifo_status,
-+ .fifo_flush = husb2_ep_fifo_flush,
-+};
-+
-+static int husb2_udc_get_frame(struct usb_gadget *gadget)
-+{
-+ struct husb2_udc *udc = to_husb2_udc(gadget);
-+
-+ return HUSB2_BFEXT(FRAME_NUMBER, husb2_readl(udc, FNUM));
-+}
-+
-+struct usb_gadget_ops husb2_udc_ops = {
-+ .get_frame = husb2_udc_get_frame,
-+};
-+
-+#define EP(nam, type, idx, caps) { \
-+ .ep = { \
-+ .ops = &husb2_ep_ops, \
-+ .name = nam, \
-+ .maxpacket = type##_FIFO_SIZE, \
-+ }, \
-+ .udc = &the_udc, \
-+ .queue = LIST_HEAD_INIT(husb2_ep[idx].queue), \
-+ .fifo_size = type##_FIFO_SIZE, \
-+ .nr_banks = type##_NR_BANKS, \
-+ .index = idx, \
-+ .capabilities = caps, \
-+}
-+
-+static struct husb2_ep husb2_ep[] = {
-+ EP("ep0", EP0, 0, 0),
-+ EP("ep1in-bulk", BULK, 1, HUSB2_EP_CAP_DMA),
-+ EP("ep2out-bulk", BULK, 2, HUSB2_EP_CAP_DMA),
-+ EP("ep3in-iso", ISO, 3, HUSB2_EP_CAP_DMA | HUSB2_EP_CAP_ISOC),
-+ EP("ep4out-iso", ISO, 4, HUSB2_EP_CAP_DMA | HUSB2_EP_CAP_ISOC),
-+ EP("ep5in-int", INT, 5, HUSB2_EP_CAP_DMA),
-+ EP("ep6out-int", INT, 6, HUSB2_EP_CAP_DMA),
-+};
-+#undef EP
-+
-+static struct usb_endpoint_descriptor husb2_ep0_desc = {
-+ .bLength = USB_DT_ENDPOINT_SIZE,
-+ .bDescriptorType = USB_DT_ENDPOINT,
-+ .bEndpointAddress = 0,
-+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-+ .wMaxPacketSize = __constant_cpu_to_le16(64),
-+ /* FIXME: I have no idea what to put here */
-+ .bInterval = 1,
-+};
-+
-+static void nop_release(struct device *dev)
-+{
-+
-+}
-+
-+static struct husb2_udc the_udc = {
-+ .gadget = {
-+ .ops = &husb2_udc_ops,
-+ .ep0 = &husb2_ep[0].ep,
-+ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
-+ .is_dualspeed = 1,
-+ .name = "husb2_udc",
-+ .dev = {
-+ .bus_id = "gadget",
-+ .release = nop_release,
-+ },
-+ },
-+
-+ .lock = SPIN_LOCK_UNLOCKED,
-+};
-+
-+static void udc_enable(struct husb2_udc *udc)
-+{
-+ struct husb2_ep *ep0 = &husb2_ep[0];
-+
-+ /* Enable the controller */
-+ husb2_writel(udc, CTRL, HUSB2_BIT(EN_HUSB2));
-+
-+ /* Reset all endpoints and enable basic interrupts */
-+ husb2_writel(udc, EPT_RST, ~0UL);
-+ husb2_writel(udc, INT_ENB, (HUSB2_BIT(DET_SUSPEND)
-+ | HUSB2_BIT(END_OF_RESET)
-+ | HUSB2_BIT(END_OF_RESUME)));
-+
-+ /* Configure endpoint 0 */
-+ ep0->desc = &husb2_ep0_desc;
-+
-+ husb2_writel(udc, EPT_RST, 1 << 0);
-+ husb2_ep_writel(ep0, CTL_ENB, HUSB2_BIT(EPT_ENABLE));
-+ husb2_ep_writel(ep0, CFG, (HUSB2_BF(EPT_SIZE, EP0_EPT_SIZE)
-+ | HUSB2_BF(EPT_TYPE, HUSB2_EPT_TYPE_CONTROL)
-+ | HUSB2_BF(BK_NUMBER, HUSB2_BK_NUMBER_ONE)));
-+
-+ husb2_ep_writel(ep0, CTL_ENB, HUSB2_BIT(RX_SETUP));
-+ husb2_writel(udc, INT_ENB, (husb2_readl(udc, INT_ENB)
-+ | HUSB2_BF(EPT_INT, 1)));
-+
-+ if (!(husb2_ep_readl(ep0, CFG) & HUSB2_BIT(EPT_MAPPED)))
-+ dev_warn(&udc->pdev->dev,
-+ "WARNING: EP0 configuration is invalid!\n");
-+}
-+
-+static void udc_disable(struct husb2_udc *udc)
-+{
-+ udc->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ husb2_writel(udc, CTRL, 0);
-+}
-+
-+/*
-+ * Called with interrupts disabled and udc->lock held.
-+ */
-+static void reset_all_endpoints(struct husb2_udc *udc)
-+{
-+ struct husb2_ep *ep;
-+ struct husb2_request *req, *tmp_req;
-+
-+ husb2_writel(udc, EPT_RST, ~0UL);
-+
-+ ep = to_husb2_ep(udc->gadget.ep0);
-+ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, -ECONNRESET);
-+ }
-+ BUG_ON(!list_empty(&ep->queue));
-+
-+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-+ if (ep->desc)
-+ husb2_ep_disable(&ep->ep);
-+ }
-+}
-+
-+static struct husb2_ep *get_ep_by_addr(struct husb2_udc *udc, u16 wIndex)
-+{
-+ struct husb2_ep *ep;
-+
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+ return to_husb2_ep(udc->gadget.ep0);
-+
-+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
-+ u8 bEndpointAddress;
-+
-+ if (!ep->desc)
-+ continue;
-+ bEndpointAddress = ep->desc->bEndpointAddress;
-+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-+ continue;
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
-+ == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
-+ return ep;
-+ }
-+
-+ return NULL;
-+}
-+
-+/* Called with interrupts disabled and udc->lock held */
-+static inline void set_protocol_stall(struct husb2_udc *udc,
-+ struct husb2_ep *ep)
-+{
-+ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(FORCE_STALL));
-+ ep->state = WAIT_FOR_SETUP;
-+}
-+
-+static inline int is_stalled(struct husb2_udc *udc, struct husb2_ep *ep)
-+{
-+ if (husb2_ep_readl(ep, STA) & HUSB2_BIT(FORCE_STALL))
-+ return 1;
-+ return 0;
-+}
-+
-+static inline void set_address(struct husb2_udc *udc, unsigned int addr)
-+{
-+ u32 regval;
-+
-+ DBG(DBG_BUS, "setting address %u...\n", addr);
-+ regval = husb2_readl(udc, CTRL);
-+ regval = HUSB2_BFINS(DEV_ADDR, addr, regval);
-+ husb2_writel(udc, CTRL, regval);
-+}
-+
-+static int handle_ep0_setup(struct husb2_udc *udc, struct husb2_ep *ep,
-+ struct usb_ctrlrequest *crq)
-+{
-+ switch (crq->bRequest) {
-+ case USB_REQ_GET_STATUS: {
-+ u16 status;
-+
-+ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
-+ /* Self-powered, no remote wakeup */
-+ status = __constant_cpu_to_le16(1 << 0);
-+ } else if (crq->bRequestType
-+ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-+ status = __constant_cpu_to_le16(0);
-+ } else if (crq->bRequestType
-+ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
-+ struct husb2_ep *target;
-+
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ status = 0;
-+ if (is_stalled(udc, target))
-+ status |= __constant_cpu_to_le16(1);
-+ } else {
-+ goto delegate;
-+ }
-+
-+ /* Write directly to the FIFO. No queueing is done. */
-+ if(crq->wLength != __constant_cpu_to_le16(sizeof(status)))
-+ goto stall;
-+ ep->state = DATA_STAGE_IN;
-+ __raw_writew(status, ep->fifo);
-+ husb2_ep_writel(ep, SET_STA, HUSB2_BIT(TX_PK_RDY));
-+ break;
-+ }
-+
-+ case USB_REQ_CLEAR_FEATURE: {
-+ if (crq->bRequestType == USB_RECIP_DEVICE) {
-+ /* We don't support TEST_MODE */
-+ goto stall;
-+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+ struct husb2_ep *target;
-+
-+ if (crq->wValue != __constant_cpu_to_le16(USB_ENDPOINT_HALT)
-+ || crq->wLength != __constant_cpu_to_le16(0))
-+ goto stall;
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ husb2_ep_writel(target, CLR_STA, (HUSB2_BIT(FORCE_STALL)
-+ | HUSB2_BIT(TOGGLE_SEQ)));
-+ } else {
-+ goto delegate;
-+ }
-+
-+ send_status(udc, ep);
-+ break;
-+ }
-+
-+ case USB_REQ_SET_FEATURE: {
-+ if (crq->bRequestType == USB_RECIP_DEVICE) {
-+ /* We don't support TEST_MODE */
-+ goto stall;
-+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+ struct husb2_ep *target;
-+
-+ if (crq->wValue != __constant_cpu_to_le16(USB_ENDPOINT_HALT)
-+ || crq->wLength != __constant_cpu_to_le16(0))
-+ goto stall;
-+
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ husb2_ep_writel(target, SET_STA, HUSB2_BIT(FORCE_STALL));
-+ } else
-+ goto delegate;
-+
-+ send_status(udc, ep);
-+ break;
-+ }
-+
-+ case USB_REQ_SET_ADDRESS:
-+ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
-+ goto delegate;
-+
-+ set_address(udc, le16_to_cpu(crq->wValue));
-+ send_status(udc, ep);
-+ ep->state = STATUS_STAGE_ADDR;
-+ break;
-+
-+ default:
-+ delegate:
-+ return udc->driver->setup(&udc->gadget, crq);
-+ }
-+
-+ return 0;
-+
-+stall:
-+ printk(KERN_ERR
-+ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
-+ "halting endpoint...\n",
-+ ep_name(ep), crq->bRequestType, crq->bRequest,
-+ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
-+ le16_to_cpu(crq->wLength));
-+ set_protocol_stall(udc, ep);
-+ return -1;
-+}
-+
-+static void husb2_control_irq(struct husb2_udc *udc, struct husb2_ep *ep)
-+{
-+ struct husb2_request *req;
-+ u32 epstatus;
-+ u32 epctrl;
-+
-+restart:
-+ epstatus = husb2_ep_readl(ep, STA);
-+ epctrl = husb2_ep_readl(ep, CTL);
-+
-+ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
-+ ep_name(ep), epstatus);
-+
-+ req = NULL;
-+ if (!list_empty(&ep->queue))
-+ req = list_entry(ep->queue.next,
-+ struct husb2_request, queue);
-+
-+ if ((epctrl & HUSB2_BIT(TX_PK_RDY))
-+ && !(epstatus & HUSB2_BIT(TX_PK_RDY))) {
-+ DBG(DBG_BUS, "tx pk rdy: %d\n", ep->state);
-+
-+ if (req->submitted)
-+ next_fifo_transaction(ep, req);
-+ else
-+ submit_request(ep, req);
-+
-+ if (req->last_transaction) {
-+ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_COMPLETE));
-+ }
-+ goto restart;
-+ }
-+ if ((epstatus & epctrl) & HUSB2_BIT(TX_COMPLETE)) {
-+ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(TX_COMPLETE));
-+ DBG(DBG_BUS, "txc: %d\n", ep->state);
-+
-+ switch (ep->state) {
-+ case DATA_STAGE_IN:
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(RX_BK_RDY));
-+ husb2_ep_writel(ep, CTL_DIS,
-+ HUSB2_BIT(TX_COMPLETE));
-+ ep->state = STATUS_STAGE_OUT;
-+ break;
-+ case STATUS_STAGE_ADDR:
-+ /* Activate our new address */
-+ husb2_writel(udc, CTRL, (husb2_readl(udc, CTRL)
-+ | HUSB2_BIT(FADDR_EN)));
-+ husb2_ep_writel(ep, CTL_DIS,
-+ HUSB2_BIT(TX_COMPLETE));
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+ case STATUS_STAGE_IN:
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, 0);
-+ submit_next_request(ep);
-+ }
-+ BUG_ON(!list_empty(&ep->queue));
-+ husb2_ep_writel(ep, CTL_DIS,
-+ HUSB2_BIT(TX_COMPLETE));
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+ default:
-+ printk(KERN_ERR
-+ "udc: %s: TXCOMP: Invalid endpoint state %d, "
-+ "halting endpoint...\n",
-+ ep_name(ep), ep->state);
-+ set_protocol_stall(udc, ep);
-+ break;
-+ }
-+
-+ goto restart;
-+ }
-+ if ((epstatus & epctrl) & HUSB2_BIT(RX_BK_RDY)) {
-+ DBG(DBG_BUS, "rxc: %d\n", ep->state);
-+
-+ switch (ep->state) {
-+ case STATUS_STAGE_OUT:
-+ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
-+
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, 0);
-+ }
-+ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(RX_BK_RDY));
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+
-+ case DATA_STAGE_OUT:
-+ receive_data(ep);
-+ break;
-+
-+ default:
-+ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
-+ set_protocol_stall(udc, ep);
-+ printk(KERN_ERR
-+ "udc: %s: RXRDY: Invalid endpoint state %d, "
-+ "halting endpoint...\n",
-+ ep_name(ep), ep->state);
-+ break;
-+ }
-+
-+ goto restart;
-+ }
-+ if (epstatus & HUSB2_BIT(RX_SETUP)) {
-+ union {
-+ struct usb_ctrlrequest crq;
-+ unsigned long data[2];
-+ } crq;
-+ unsigned int pkt_len;
-+ int ret;
-+
-+ if (ep->state != WAIT_FOR_SETUP) {
-+ /*
-+ * Didn't expect a SETUP packet at this
-+ * point. Clean up any pending requests (which
-+ * may be successful).
-+ */
-+ int status = -EPROTO;
-+
-+ /*
-+ * RXRDY is dropped when SETUP packets arrive.
-+ * Just pretend we received the status packet.
-+ */
-+ if (ep->state == STATUS_STAGE_OUT)
-+ status = 0;
-+
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, status);
-+ }
-+ BUG_ON(!list_empty(&ep->queue));
-+ }
-+
-+ pkt_len = HUSB2_BFEXT(BYTE_COUNT, husb2_ep_readl(ep, STA));
-+ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
-+ BUG_ON(pkt_len != sizeof(crq));
-+
-+ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-+ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
-+
-+ /* Free up one bank in the FIFO so that we can
-+ * generate or receive a reply right away. */
-+ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_SETUP));
-+
-+ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
-+ ep->state, crq.crq.bRequestType,
-+ crq.crq.bRequest); */
-+
-+ if (crq.crq.bRequestType & USB_DIR_IN) {
-+ /*
-+ * The USB 2.0 spec states that "if wLength is
-+ * zero, there is no data transfer phase."
-+ * However, testusb #14 seems to actually
-+ * expect a data phase even if wLength = 0...
-+ */
-+ ep->state = DATA_STAGE_IN;
-+ } else {
-+ if (crq.crq.wLength != __constant_cpu_to_le16(0))
-+ ep->state = DATA_STAGE_OUT;
-+ else
-+ ep->state = STATUS_STAGE_IN;
-+ }
-+
-+ ret = -1;
-+ if (ep->index == 0)
-+ ret = handle_ep0_setup(udc, ep, &crq.crq);
-+ else
-+ ret = udc->driver->setup(&udc->gadget, &crq.crq);
-+
-+ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
-+ crq.crq.bRequestType, crq.crq.bRequest,
-+ le16_to_cpu(crq.crq.wLength), ep->state, ret);
-+
-+ if (ret < 0) {
-+ /* Let the host know that we failed */
-+ set_protocol_stall(udc, ep);
-+ }
-+ }
-+}
-+
-+static void husb2_ep_irq(struct husb2_udc *udc, struct husb2_ep *ep)
-+{
-+ struct husb2_request *req;
-+ u32 epstatus;
-+ u32 epctrl;
-+
-+ epstatus = husb2_ep_readl(ep, STA);
-+ epctrl = husb2_ep_readl(ep, CTL);
-+
-+ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
-+ ep_name(ep), epstatus);
-+
-+ while ((epctrl & HUSB2_BIT(TX_PK_RDY))
-+ && !(epstatus & HUSB2_BIT(TX_PK_RDY))) {
-+ BUG_ON(!ep_is_in(ep));
-+
-+ DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
-+
-+ if (list_empty(&ep->queue)) {
-+ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
-+ husb2_ep_writel(ep, CTL_DIS, HUSB2_BIT(TX_PK_RDY));
-+ return;
-+ }
-+
-+ req = list_entry(ep->queue.next, struct husb2_request, queue);
-+
-+ if (req->using_dma) {
-+ BUG_ON(!req->send_zlp);
-+
-+ /* Send a zero-length packet */
-+ husb2_ep_writel(ep, SET_STA,
-+ HUSB2_BIT(TX_PK_RDY));
-+ husb2_ep_writel(ep, CTL_DIS,
-+ HUSB2_BIT(TX_PK_RDY));
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ } else {
-+ if (req->submitted)
-+ next_fifo_transaction(ep, req);
-+ else
-+ submit_request(ep, req);
-+
-+ if (req->last_transaction) {
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ }
-+ }
-+
-+ epstatus = husb2_ep_readl(ep, STA);
-+ epctrl = husb2_ep_readl(ep, CTL);
-+ }
-+ if ((epstatus & epctrl) & HUSB2_BIT(RX_BK_RDY)) {
-+ BUG_ON(ep_is_in(ep));
-+
-+ DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
-+ receive_data(ep);
-+ husb2_ep_writel(ep, CLR_STA, HUSB2_BIT(RX_BK_RDY));
-+ }
-+}
-+
-+static void husb2_dma_irq(struct husb2_udc *udc, struct husb2_ep *ep)
-+{
-+ struct husb2_request *req;
-+ u32 status, control, pending;
-+
-+ status = husb2_dma_readl(ep, STATUS);
-+ control = husb2_dma_readl(ep, CONTROL);
-+#ifdef CONFIG_DEBUG_FS
-+ ep->last_dma_status = status;
-+#endif
-+ pending = status & control;
-+ DBG(DBG_INT, "dma irq, status=%#08x, pending=%#08x, control=%#08x\n",
-+ status, pending, control);
-+
-+ BUG_ON(status & HUSB2_BIT(DMA_CH_EN));
-+
-+ if (list_empty(&ep->queue))
-+ /* Might happen if a reset comes along at the right moment */
-+ return;
-+
-+ if (pending & (HUSB2_BIT(DMA_END_TR_ST) | HUSB2_BIT(DMA_END_BUF_ST))) {
-+ req = list_entry(ep->queue.next, struct husb2_request, queue);
-+ husb2_update_req(ep, req, status);
-+
-+ if (req->send_zlp) {
-+ husb2_ep_writel(ep, CTL_ENB, HUSB2_BIT(TX_PK_RDY));
-+ } else {
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ }
-+ }
-+}
-+
-+static irqreturn_t husb2_udc_irq(int irq, void *devid)
-+{
-+ struct husb2_udc *udc = devid;
-+ u32 status;
-+ u32 dma_status;
-+ u32 ep_status;
-+
-+ spin_lock(&udc->lock);
-+
-+ status = husb2_readl(udc, INT_STA);
-+ DBG(DBG_INT, "irq, status=%#08x\n", status);
-+
-+ if (status & HUSB2_BIT(DET_SUSPEND)) {
-+ husb2_writel(udc, INT_CLR, HUSB2_BIT(DET_SUSPEND));
-+ //DBG(DBG_BUS, "Suspend detected\n");
-+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+ && udc->driver && udc->driver->suspend)
-+ udc->driver->suspend(&udc->gadget);
-+ }
-+
-+ if (status & HUSB2_BIT(WAKE_UP)) {
-+ husb2_writel(udc, INT_CLR, HUSB2_BIT(WAKE_UP));
-+ //DBG(DBG_BUS, "Wake Up CPU detected\n");
-+ }
-+
-+ if (status & HUSB2_BIT(END_OF_RESUME)) {
-+ husb2_writel(udc, INT_CLR, HUSB2_BIT(END_OF_RESUME));
-+ DBG(DBG_BUS, "Resume detected\n");
-+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+ && udc->driver && udc->driver->resume)
-+ udc->driver->resume(&udc->gadget);
-+ }
-+
-+ dma_status = HUSB2_BFEXT(DMA_INT, status);
-+ if (dma_status) {
-+ int i;
-+
-+ for (i = 1; i < HUSB2_NR_ENDPOINTS; i++)
-+ if (dma_status & (1 << i))
-+ husb2_dma_irq(udc, &husb2_ep[i]);
-+ }
-+
-+ ep_status = HUSB2_BFEXT(EPT_INT, status);
-+ if (ep_status) {
-+ int i;
-+
-+ for (i = 0; i < HUSB2_NR_ENDPOINTS; i++)
-+ if (ep_status & (1 << i)) {
-+ if (ep_is_control(&husb2_ep[i]))
-+ husb2_control_irq(udc, &husb2_ep[i]);
-+ else
-+ husb2_ep_irq(udc, &husb2_ep[i]);
-+ }
-+ }
-+
-+ if (status & HUSB2_BIT(END_OF_RESET)) {
-+ husb2_writel(udc, INT_CLR, HUSB2_BIT(END_OF_RESET));
-+ if (status & HUSB2_BIT(HIGH_SPEED)) {
-+ DBG(DBG_BUS, "High-speed bus reset detected\n");
-+ udc->gadget.speed = USB_SPEED_HIGH;
-+ } else {
-+ DBG(DBG_BUS, "Full-speed bus reset detected\n");
-+ udc->gadget.speed = USB_SPEED_FULL;
-+ }
-+ /* Better start from scratch... */
-+ reset_all_endpoints(udc);
-+ husb2_ep[0].state = WAIT_FOR_SETUP;
-+ udc_enable(udc);
-+ }
-+
-+ spin_unlock(&udc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-+{
-+ struct husb2_udc *udc = &the_udc;
-+ int ret;
-+
-+ spin_lock(&udc->lock);
-+
-+ ret = -ENODEV;
-+ if (!udc->pdev)
-+ goto out;
-+ ret = -EBUSY;
-+ if (udc->driver)
-+ goto out;
-+
-+ udc->driver = driver;
-+ udc->gadget.dev.driver = &driver->driver;
-+
-+ device_add(&udc->gadget.dev);
-+ ret = driver->bind(&udc->gadget);
-+ if (ret) {
-+ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
-+ driver->driver.name, ret);
-+ device_del(&udc->gadget.dev);
-+
-+ udc->driver = NULL;
-+ udc->gadget.dev.driver = NULL;
-+ goto out;
-+ }
-+
-+ /* TODO: Create sysfs files */
-+
-+ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
-+ udc_enable(udc);
-+
-+out:
-+ spin_unlock(&udc->lock);
-+ return ret;
-+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
-+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-+{
-+ struct husb2_udc *udc = &the_udc;
-+ int ret;
-+
-+ spin_lock(&udc->lock);
-+
-+ ret = -ENODEV;
-+ if (!udc->pdev)
-+ goto out;
-+ ret = -EINVAL;
-+ if (driver != udc->driver)
-+ goto out;
-+
-+ local_irq_disable();
-+ udc_disable(udc);
-+ local_irq_enable();
-+
-+ driver->unbind(&udc->gadget);
-+ udc->driver = NULL;
-+
-+ device_del(&udc->gadget.dev);
-+
-+ /* TODO: Remove sysfs files */
-+
-+ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
-+
-+out:
-+ spin_unlock(&udc->lock);
-+ return ret;
-+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
-+
-+static int __devinit husb2_udc_probe(struct platform_device *pdev)
-+{
-+ struct resource *regs, *fifo;
-+ struct clk *pclk, *hclk;
-+ struct husb2_udc *udc = &the_udc;
-+ int irq, ret, i;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
-+ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-+ if (!regs || !fifo)
-+ return -ENXIO;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ ret = PTR_ERR(hclk);
-+ goto out_put_pclk;
-+ }
-+
-+ clk_enable(pclk);
-+ clk_enable(hclk);
-+
-+ udc->pdev = pdev;
-+ udc->pclk = pclk;
-+ udc->hclk = hclk;
-+
-+ ret = -ENOMEM;
-+ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!udc->regs) {
-+ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
-+ goto out_disable_clocks;
-+ }
-+ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
-+ (unsigned long)regs->start, udc->regs);
-+ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
-+ if (!udc->fifo) {
-+ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
-+ goto out_unmap_regs;
-+ }
-+ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
-+ (unsigned long)fifo->start, udc->fifo);
-+
-+ device_initialize(&udc->gadget.dev);
-+ udc->gadget.dev.parent = &pdev->dev;
-+ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-+
-+ /* The 3-word descriptors must be 4-word aligned... */
-+ udc->desc_pool = dma_pool_create("husb2-desc", &pdev->dev,
-+ sizeof(struct husb2_dma_desc),
-+ 16, 0);
-+ if (!udc->desc_pool) {
-+ dev_err(&pdev->dev, "Cannot create descriptor DMA pool\n");
-+ goto out_unmap_fifo;
-+ }
-+
-+ platform_set_drvdata(pdev, udc);
-+
-+ udc_disable(udc);
-+
-+ INIT_LIST_HEAD(&husb2_ep[0].ep.ep_list);
-+ husb2_ep[0].ep_regs = udc->regs + HUSB2_EPT_BASE(0);
-+ husb2_ep[0].dma_regs = udc->regs + HUSB2_DMA_BASE(0);
-+ husb2_ep[0].fifo = udc->fifo + HUSB2_FIFO_BASE(0);
-+ for (i = 1; i < ARRAY_SIZE(husb2_ep); i++) {
-+ struct husb2_ep *ep = &husb2_ep[i];
-+
-+ ep->ep_regs = udc->regs + HUSB2_EPT_BASE(i);
-+ ep->dma_regs = udc->regs + HUSB2_DMA_BASE(i);
-+ ep->fifo = udc->fifo + HUSB2_FIFO_BASE(i);
-+
-+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-+ }
-+
-+ ret = request_irq(irq, husb2_udc_irq, SA_SAMPLE_RANDOM,
-+ "husb2_udc", udc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
-+ irq, ret);
-+ goto out_free_pool;
-+ }
-+ udc->irq = irq;
-+
-+ husb2_init_debugfs(udc);
-+
-+ return 0;
-+
-+out_free_pool:
-+ dma_pool_destroy(udc->desc_pool);
-+out_unmap_fifo:
-+ iounmap(udc->fifo);
-+out_unmap_regs:
-+ iounmap(udc->regs);
-+out_disable_clocks:
-+ clk_disable(hclk);
-+ clk_disable(pclk);
-+ clk_put(hclk);
-+out_put_pclk:
-+ clk_put(pclk);
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return ret;
-+}
-+
-+static int __devexit husb2_udc_remove(struct platform_device *pdev)
-+{
-+ struct husb2_udc *udc;
-+
-+ udc = platform_get_drvdata(pdev);
-+ if (!udc)
-+ return 0;
-+
-+ husb2_cleanup_debugfs(udc);
-+
-+ free_irq(udc->irq, udc);
-+ dma_pool_destroy(udc->desc_pool);
-+ iounmap(udc->fifo);
-+ iounmap(udc->regs);
-+ clk_disable(udc->hclk);
-+ clk_disable(udc->pclk);
-+ clk_put(udc->hclk);
-+ clk_put(udc->pclk);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver udc_driver = {
-+ .probe = husb2_udc_probe,
-+ .remove = __devexit_p(husb2_udc_remove),
-+ .driver = {
-+ .name = "usba",
-+ },
-+};
-+
-+static int __init udc_init(void)
-+{
-+ printk(KERN_INFO "husb2device: Driver version %s\n", DRIVER_VERSION);
-+ return platform_driver_register(&udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit(void)
-+{
-+ platform_driver_unregister(&udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("Atmel HUSB2 Device Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.h linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.h
---- linux-2.6.20.4-0rig/drivers/usb/gadget/husb2_udc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/husb2_udc.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,406 @@
-+/*
-+ * Driver for the Atmel HUSB2device high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_USB_GADGET_HUSB2_UDC_H__
-+#define __LINUX_USB_GADGET_HUSB2_UDC_H__
-+
-+/* USB register offsets */
-+#define HUSB2_CTRL 0x0000
-+#define HUSB2_FNUM 0x0004
-+#define HUSB2_INT_ENB 0x0010
-+#define HUSB2_INT_STA 0x0014
-+#define HUSB2_INT_CLR 0x0018
-+#define HUSB2_EPT_RST 0x001c
-+#define HUSB2_TST_SOF_CNT 0x00d0
-+#define HUSB2_TST_CNT_A 0x00d4
-+#define HUSB2_TST_CNT_B 0x00d8
-+#define HUSB2_TST_MODE_REG 0x00dc
-+#define HUSB2_TST 0x00f0
-+
-+/* USB endpoint register offsets */
-+#define HUSB2_EPT_CFG 0x0000
-+#define HUSB2_EPT_CTL_ENB 0x0004
-+#define HUSB2_EPT_CTL_DIS 0x0008
-+#define HUSB2_EPT_CTL 0x000c
-+#define HUSB2_EPT_SET_STA 0x0014
-+#define HUSB2_EPT_CLR_STA 0x0018
-+#define HUSB2_EPT_STA 0x001c
-+
-+/* USB DMA register offsets */
-+#define HUSB2_DMA_NXT_DSC 0x0000
-+#define HUSB2_DMA_ADDRESS 0x0004
-+#define HUSB2_DMA_CONTROL 0x0008
-+#define HUSB2_DMA_STATUS 0x000c
-+
-+/* Bitfields in CTRL */
-+#define HUSB2_DEV_ADDR_OFFSET 0
-+#define HUSB2_DEV_ADDR_SIZE 7
-+#define HUSB2_FADDR_EN_OFFSET 7
-+#define HUSB2_FADDR_EN_SIZE 1
-+#define HUSB2_EN_HUSB2_OFFSET 8
-+#define HUSB2_EN_HUSB2_SIZE 1
-+#define HUSB2_DETACH_OFFSET 9
-+#define HUSB2_DETACH_SIZE 1
-+#define HUSB2_REMOTE_WAKE_UP_OFFSET 10
-+#define HUSB2_REMOTE_WAKE_UP_SIZE 1
-+
-+/* Bitfields in FNUM */
-+#define HUSB2_MICRO_FRAME_NUM_OFFSET 0
-+#define HUSB2_MICRO_FRAME_NUM_SIZE 3
-+#define HUSB2_FRAME_NUMBER_OFFSET 3
-+#define HUSB2_FRAME_NUMBER_SIZE 11
-+#define HUSB2_FRAME_NUM_ERROR_OFFSET 31
-+#define HUSB2_FRAME_NUM_ERROR_SIZE 1
-+
-+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
-+#define HUSB2_HIGH_SPEED_OFFSET 0
-+#define HUSB2_HIGH_SPEED_SIZE 1
-+#define HUSB2_DET_SUSPEND_OFFSET 1
-+#define HUSB2_DET_SUSPEND_SIZE 1
-+#define HUSB2_MICRO_SOF_OFFSET 2
-+#define HUSB2_MICRO_SOF_SIZE 1
-+#define HUSB2_SOF_OFFSET 3
-+#define HUSB2_SOF_SIZE 1
-+#define HUSB2_END_OF_RESET_OFFSET 4
-+#define HUSB2_END_OF_RESET_SIZE 1
-+#define HUSB2_WAKE_UP_OFFSET 5
-+#define HUSB2_WAKE_UP_SIZE 1
-+#define HUSB2_END_OF_RESUME_OFFSET 6
-+#define HUSB2_END_OF_RESUME_SIZE 1
-+#define HUSB2_UPSTREAM_RESUME_OFFSET 7
-+#define HUSB2_UPSTREAM_RESUME_SIZE 1
-+#define HUSB2_EPT_INT_OFFSET 8
-+#define HUSB2_EPT_INT_SIZE 16
-+#define HUSB2_DMA_INT_OFFSET 24
-+#define HUSB2_DMA_INT_SIZE 8
-+
-+/* Bitfields in EPT_RST */
-+#define HUSB2_RST_OFFSET 0
-+#define HUSB2_RST_SIZE 16
-+
-+/* Bitfields in TST_SOF_CNT */
-+#define HUSB2_SOF_CNT_MAX_OFFSET 0
-+#define HUSB2_SOF_CNT_MAX_SIZE 7
-+#define HUSB2_SOF_CNT_LOAD_OFFSET 7
-+#define HUSB2_SOF_CNT_LOAD_SIZE 1
-+
-+/* Bitfields in TST_CNT_A */
-+#define HUSB2_CNT_A_MAX_OFFSET 0
-+#define HUSB2_CNT_A_MAX_SIZE 7
-+#define HUSB2_CNT_A_LOAD_OFFSET 7
-+#define HUSB2_CNT_A_LOAD_SIZE 1
-+
-+/* Bitfields in TST_CNT_B */
-+#define HUSB2_CNT_B_MAX_OFFSET 0
-+#define HUSB2_CNT_B_MAX_SIZE 7
-+#define HUSB2_CNT_B_LOAD_OFFSET 7
-+#define HUSB2_CNT_B_LOAD_SIZE 1
-+
-+/* Bitfields in TST_MODE_REG */
-+#define HUSB2_TST_MODE_OFFSET 0
-+#define HUSB2_TST_MODE_SIZE 6
-+
-+/* Bitfields in HUSB2_TST */
-+#define HUSB2_SPEED_CFG_OFFSET 0
-+#define HUSB2_SPEED_CFG_SIZE 2
-+#define HUSB2_TST_J_MODE_OFFSET 2
-+#define HUSB2_TST_J_MODE_SIZE 1
-+#define HUSB2_TST_K_MODE_OFFSET 3
-+#define HUSB2_TST_K_MODE_SIZE 1
-+#define HUSB2_TST_PKT_MODE_OFFSE 4
-+#define HUSB2_TST_PKT_MODE_SIZE 1
-+#define HUSB2_OPMODE2_OFFSET 5
-+#define HUSB2_OPMODE2_SIZE 1
-+
-+/* Bitfields in EPT_CFG */
-+#define HUSB2_EPT_SIZE_OFFSET 0
-+#define HUSB2_EPT_SIZE_SIZE 3
-+#define HUSB2_EPT_DIR_OFFSET 3
-+#define HUSB2_EPT_DIR_SIZE 1
-+#define HUSB2_EPT_TYPE_OFFSET 4
-+#define HUSB2_EPT_TYPE_SIZE 2
-+#define HUSB2_BK_NUMBER_OFFSET 6
-+#define HUSB2_BK_NUMBER_SIZE 2
-+#define HUSB2_NB_TRANS_OFFSET 8
-+#define HUSB2_NB_TRANS_SIZE 2
-+#define HUSB2_EPT_MAPPED_OFFSET 31
-+#define HUSB2_EPT_MAPPED_SIZE 1
-+
-+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
-+#define HUSB2_EPT_ENABLE_OFFSET 0
-+#define HUSB2_EPT_ENABLE_SIZE 1
-+#define HUSB2_AUTO_VALID_OFFSET 1
-+#define HUSB2_AUTO_VALID_SIZE 1
-+#define HUSB2_INT_DIS_DMA_OFFSET 3
-+#define HUSB2_INT_DIS_DMA_SIZE 1
-+#define HUSB2_NYET_DIS_OFFSET 4
-+#define HUSB2_NYET_DIS_SIZE 1
-+#define HUSB2_DATAX_RX_OFFSET 6
-+#define HUSB2_DATAX_RX_SIZE 1
-+#define HUSB2_MDATA_RX_OFFSET 7
-+#define HUSB2_MDATA_RX_SIZE 1
-+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
-+#define HUSB2_BUSY_BANK_IE_OFFSET 18
-+#define HUSB2_BUSY_BANK_IE_SIZE 1
-+
-+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
-+#define HUSB2_FORCE_STALL_OFFSET 5
-+#define HUSB2_FORCE_STALL_SIZE 1
-+#define HUSB2_TOGGLE_SEQ_OFFSET 6
-+#define HUSB2_TOGGLE_SEQ_SIZE 2
-+#define HUSB2_ERR_OVFLW_OFFSET 8
-+#define HUSB2_ERR_OVFLW_SIZE 1
-+#define HUSB2_RX_BK_RDY_OFFSET 9
-+#define HUSB2_RX_BK_RDY_SIZE 1
-+#define HUSB2_KILL_BANK_OFFSET 9
-+#define HUSB2_KILL_BANK_SIZE 1
-+#define HUSB2_TX_COMPLETE_OFFSET 10
-+#define HUSB2_TX_COMPLETE_SIZE 1
-+#define HUSB2_TX_PK_RDY_OFFSET 11
-+#define HUSB2_TX_PK_RDY_SIZE 1
-+#define HUSB2_ISO_ERR_TRANS_OFFSET 11
-+#define HUSB2_ISO_ERR_TRANS_SIZE 1
-+#define HUSB2_RX_SETUP_OFFSET 12
-+#define HUSB2_RX_SETUP_SIZE 1
-+#define HUSB2_ISO_ERR_FLOW_OFFSET 12
-+#define HUSB2_ISO_ERR_FLOW_SIZE 1
-+#define HUSB2_STALL_SENT_OFFSET 13
-+#define HUSB2_STALL_SENT_SIZE 1
-+#define HUSB2_ISO_ERR_CRC_OFFSET 13
-+#define HUSB2_ISO_ERR_CRC_SIZE 1
-+#define HUSB2_ISO_ERR_NBTRANS_OFFSET 13
-+#define HUSB2_ISO_ERR_NBTRANS_SIZE 1
-+#define HUSB2_NAK_IN_OFFSET 14
-+#define HUSB2_NAK_IN_SIZE 1
-+#define HUSB2_ISO_ERR_FLUSH_OFFSET 14
-+#define HUSB2_ISO_ERR_FLUSH_SIZE 1
-+#define HUSB2_NAK_OUT_OFFSET 15
-+#define HUSB2_NAK_OUT_SIZE 1
-+#define HUSB2_CURRENT_BANK_OFFSET 16
-+#define HUSB2_CURRENT_BANK_SIZE 2
-+#define HUSB2_BUSY_BANKS_OFFSET 18
-+#define HUSB2_BUSY_BANKS_SIZE 2
-+#define HUSB2_BYTE_COUNT_OFFSET 20
-+#define HUSB2_BYTE_COUNT_SIZE 11
-+#define HUSB2_SHORT_PACKET_OFFSET 31
-+#define HUSB2_SHORT_PACKET_SIZE 1
-+
-+/* Bitfields in DMA_CONTROL */
-+#define HUSB2_DMA_CH_EN_OFFSET 0
-+#define HUSB2_DMA_CH_EN_SIZE 1
-+#define HUSB2_DMA_LINK_OFFSET 1
-+#define HUSB2_DMA_LINK_SIZE 1
-+#define HUSB2_DMA_END_TR_EN_OFFSET 2
-+#define HUSB2_DMA_END_TR_EN_SIZE 1
-+#define HUSB2_DMA_END_BUF_EN_OFFSET 3
-+#define HUSB2_DMA_END_BUF_EN_SIZE 1
-+#define HUSB2_DMA_END_TR_IE_OFFSET 4
-+#define HUSB2_DMA_END_TR_IE_SIZE 1
-+#define HUSB2_DMA_END_BUF_IE_OFFSET 5
-+#define HUSB2_DMA_END_BUF_IE_SIZE 1
-+#define HUSB2_DMA_DESC_LOAD_IE_OFFSET 6
-+#define HUSB2_DMA_DESC_LOAD_IE_SIZE 1
-+#define HUSB2_DMA_BURST_LOCK_OFFSET 7
-+#define HUSB2_DMA_BURST_LOCK_SIZE 1
-+#define HUSB2_DMA_BUF_LEN_OFFSET 16
-+#define HUSB2_DMA_BUF_LEN_SIZE 16
-+
-+/* Bitfields in DMA_STATUS */
-+#define HUSB2_DMA_CH_ACTIVE_OFFSET 1
-+#define HUSB2_DMA_CH_ACTIVE_SIZE 1
-+#define HUSB2_DMA_END_TR_ST_OFFSET 4
-+#define HUSB2_DMA_END_TR_ST_SIZE 1
-+#define HUSB2_DMA_END_BUF_ST_OFFSET 5
-+#define HUSB2_DMA_END_BUF_ST_SIZE 1
-+#define HUSB2_DMA_DESC_LOAD_ST_OFFSET 6
-+#define HUSB2_DMA_DESC_LOAD_ST_SIZE 1
-+
-+/* Constants for SPEED_CFG */
-+#define HUSB2_SPEED_CFG_NORMAL 0
-+#define HUSB2_SPEED_CFG_FORCE_HIGH 2
-+#define HUSB2_SPEED_CFG_FORCE_FULL 3
-+
-+/* Constants for EPT_SIZE */
-+#define HUSB2_EPT_SIZE_8 0
-+#define HUSB2_EPT_SIZE_16 1
-+#define HUSB2_EPT_SIZE_32 2
-+#define HUSB2_EPT_SIZE_64 3
-+#define HUSB2_EPT_SIZE_128 4
-+#define HUSB2_EPT_SIZE_256 5
-+#define HUSB2_EPT_SIZE_512 6
-+#define HUSB2_EPT_SIZE_1024 7
-+
-+/* Constants for EPT_TYPE */
-+#define HUSB2_EPT_TYPE_CONTROL 0
-+#define HUSB2_EPT_TYPE_ISO 1
-+#define HUSB2_EPT_TYPE_BULK 2
-+#define HUSB2_EPT_TYPE_INT 3
-+
-+/* Constants for BK_NUMBER */
-+#define HUSB2_BK_NUMBER_ZERO 0
-+#define HUSB2_BK_NUMBER_ONE 1
-+#define HUSB2_BK_NUMBER_DOUBLE 2
-+#define HUSB2_BK_NUMBER_TRIPLE 3
-+
-+/* Bit manipulation macros */
-+#define HUSB2_BIT(name) \
-+ (1 << HUSB2_##name##_OFFSET)
-+#define HUSB2_BF(name,value) \
-+ (((value) & ((1 << HUSB2_##name##_SIZE) - 1)) \
-+ << HUSB2_##name##_OFFSET)
-+#define HUSB2_BFEXT(name,value) \
-+ (((value) >> HUSB2_##name##_OFFSET) \
-+ & ((1 << HUSB2_##name##_SIZE) - 1))
-+#define HUSB2_BFINS(name,value,old) \
-+ (((old) & ~(((1 << HUSB2_##name##_SIZE) - 1) \
-+ << HUSB2_##name##_OFFSET)) \
-+ | HUSB2_BF(name,value))
-+
-+/* Register access macros */
-+#define husb2_readl(udc,reg) \
-+ __raw_readl((udc)->regs + HUSB2_##reg)
-+#define husb2_writel(udc,reg,value) \
-+ __raw_writel((value), (udc)->regs + HUSB2_##reg)
-+#define husb2_ep_readl(ep,reg) \
-+ __raw_readl((ep)->ep_regs + HUSB2_EPT_##reg)
-+#define husb2_ep_writel(ep,reg,value) \
-+ __raw_writel((value), (ep)->ep_regs + HUSB2_EPT_##reg)
-+#define husb2_dma_readl(ep,reg) \
-+ __raw_readl((ep)->dma_regs + HUSB2_DMA_##reg)
-+#define husb2_dma_writel(ep,reg,value) \
-+ __raw_writel((value), (ep)->dma_regs + HUSB2_DMA_##reg)
-+
-+/* Calculate base address for a given endpoint or DMA controller */
-+#define HUSB2_EPT_BASE(x) (0x100 + (x) * 0x20)
-+#define HUSB2_DMA_BASE(x) (0x300 + (x) * 0x10)
-+#define HUSB2_FIFO_BASE(x) ((x) << 16)
-+
-+/* Synth parameters */
-+#define HUSB2_NR_ENDPOINTS 7
-+
-+#define EP0_FIFO_SIZE 64
-+#define EP0_EPT_SIZE HUSB2_EPT_SIZE_64
-+#define EP0_NR_BANKS 1
-+#define BULK_FIFO_SIZE 512
-+#define BULK_EPT_SIZE HUSB2_EPT_SIZE_512
-+#define BULK_NR_BANKS 2
-+#define ISO_FIFO_SIZE 1024
-+#define ISO_EPT_SIZE HUSB2_EPT_SIZE_1024
-+#define ISO_NR_BANKS 3
-+#define INT_FIFO_SIZE 64
-+#define INT_EPT_SIZE HUSB2_EPT_SIZE_64
-+#define INT_NR_BANKS 3
-+
-+enum husb2_ctrl_state {
-+ WAIT_FOR_SETUP,
-+ DATA_STAGE_IN,
-+ DATA_STAGE_OUT,
-+ STATUS_STAGE_IN,
-+ STATUS_STAGE_OUT,
-+ STATUS_STAGE_ADDR,
-+};
-+/*
-+ EP_STATE_IDLE,
-+ EP_STATE_SETUP,
-+ EP_STATE_IN_DATA,
-+ EP_STATE_OUT_DATA,
-+ EP_STATE_SET_ADDR_STATUS,
-+ EP_STATE_RX_STATUS,
-+ EP_STATE_TX_STATUS,
-+ EP_STATE_HALT,
-+*/
-+
-+struct husb2_dma_desc {
-+ dma_addr_t next;
-+ dma_addr_t addr;
-+ u32 ctrl;
-+};
-+
-+struct husb2_ep {
-+ int state;
-+ void __iomem *ep_regs;
-+ void __iomem *dma_regs;
-+ void __iomem *fifo;
-+ struct usb_ep ep;
-+ struct husb2_udc *udc;
-+
-+ struct list_head queue;
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ u16 fifo_size;
-+ u8 nr_banks;
-+ u8 index;
-+ u8 capabilities;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ u32 last_dma_status;
-+ struct dentry *debugfs_dir;
-+ struct dentry *debugfs_queue;
-+ struct dentry *debugfs_dma_status;
-+#endif
-+};
-+#define HUSB2_EP_CAP_ISOC 0x0001
-+#define HUSB2_EP_CAP_DMA 0x0002
-+
-+struct husb2_packet {
-+ struct husb2_dma_desc *desc;
-+ dma_addr_t desc_dma;
-+};
-+
-+struct husb2_request {
-+ struct usb_request req;
-+ struct list_head queue;
-+
-+ struct husb2_packet *packet;
-+ unsigned int nr_pkts;
-+
-+ unsigned int submitted:1;
-+ unsigned int using_dma:1;
-+ unsigned int last_transaction:1;
-+ unsigned int send_zlp:1;
-+};
-+
-+struct husb2_udc {
-+ spinlock_t lock;
-+
-+ void __iomem *regs;
-+ void __iomem *fifo;
-+
-+ struct dma_pool *desc_pool;
-+
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+ struct platform_device *pdev;
-+ int irq;
-+ struct clk *pclk;
-+ struct clk *hclk;
-+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+#endif
-+};
-+
-+#define to_husb2_ep(x) container_of((x), struct husb2_ep, ep)
-+#define to_husb2_req(x) container_of((x), struct husb2_request, req)
-+#define to_husb2_udc(x) container_of((x), struct husb2_udc, gadget)
-+
-+#define ep_index(ep) ((ep)->index)
-+#define ep_can_dma(ep) ((ep)->capabilities & HUSB2_EP_CAP_DMA)
-+#define ep_is_in(ep) (((ep)->desc->bEndpointAddress \
-+ & USB_ENDPOINT_DIR_MASK) \
-+ == USB_DIR_IN)
-+#define ep_is_isochronous(ep) \
-+ (((ep)->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) \
-+ == USB_ENDPOINT_XFER_ISOC)
-+#define ep_is_control(ep) (ep_index(ep) == 0)
-+#define ep_name(ep) ((ep)->ep.name)
-+#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
-+
-+#endif /* __LINUX_USB_GADGET_HUSB2_H */
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/Kconfig linux-2.6.20.4-atmel/drivers/usb/gadget/Kconfig
---- linux-2.6.20.4-0rig/drivers/usb/gadget/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -154,6 +154,16 @@
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-+config USB_GADGET_HUSB2DEV
-+ boolean "Atmel HUSB2DEVICE"
-+ select USB_GADGET_DUALSPEED
-+ depends on AVR32
-+
-+config USB_HUSB2DEV
-+ tristate
-+ depends on USB_GADGET_HUSB2DEV
-+ default USB_GADGET
-+ select USB_GADGET_SELECTED
-
- config USB_GADGET_OMAP
- boolean "OMAP USB Device Controller"
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/Makefile linux-2.6.20.4-atmel/drivers/usb/gadget/Makefile
---- linux-2.6.20.4-0rig/drivers/usb/gadget/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -8,6 +8,7 @@
- obj-$(CONFIG_USB_OMAP) += omap_udc.o
- obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
- obj-$(CONFIG_USB_AT91) += at91_udc.o
-+obj-$(CONFIG_USB_HUSB2DEV) += husb2_udc.o
-
- #
- # USB gadget drivers
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/serial.c linux-2.6.20.4-atmel/drivers/usb/gadget/serial.c
---- linux-2.6.20.4-0rig/drivers/usb/gadget/serial.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/serial.c 2007-03-24 16:42:28.000000000 +0100
-@@ -333,7 +333,7 @@
- .strings = gs_strings,
- };
-
--static struct usb_device_descriptor gs_device_desc = {
-+static struct usb_device_descriptor __attribute__((aligned(2))) gs_device_desc = {
- .bLength = USB_DT_DEVICE_SIZE,
- .bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16(0x0200),
-@@ -353,7 +353,7 @@
- .bmAttributes = USB_OTG_SRP,
- };
-
--static struct usb_config_descriptor gs_bulk_config_desc = {
-+static struct usb_config_descriptor __attribute__((aligned(2))) gs_bulk_config_desc = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- /* .wTotalLength computed dynamically */
-@@ -364,7 +364,7 @@
- .bMaxPower = 1,
- };
-
--static struct usb_config_descriptor gs_acm_config_desc = {
-+static struct usb_config_descriptor __attribute__((aligned(2))) gs_acm_config_desc = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- /* .wTotalLength computed dynamically */
-@@ -375,7 +375,7 @@
- .bMaxPower = 1,
- };
-
--static const struct usb_interface_descriptor gs_bulk_interface_desc = {
-+static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_bulk_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_BULK_INTERFACE_ID,
-@@ -386,7 +386,7 @@
- .iInterface = GS_DATA_STR_ID,
- };
-
--static const struct usb_interface_descriptor gs_control_interface_desc = {
-+static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_control_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
-@@ -397,7 +397,7 @@
- .iInterface = GS_CONTROL_STR_ID,
- };
-
--static const struct usb_interface_descriptor gs_data_interface_desc = {
-+static const struct usb_interface_descriptor __attribute__((aligned(2))) gs_data_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_DATA_INTERFACE_ID,
-@@ -408,7 +408,7 @@
- .iInterface = GS_DATA_STR_ID,
- };
-
--static const struct usb_cdc_header_desc gs_header_desc = {
-+static const struct usb_cdc_header_desc __attribute__((aligned(2))) gs_header_desc = {
- .bLength = sizeof(gs_header_desc),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_HEADER_TYPE,
-@@ -438,7 +438,7 @@
- .bSlaveInterface0 = 1, /* index of data interface */
- };
-
--static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
-+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_notify_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
-@@ -447,14 +447,14 @@
- .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
- };
-
--static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
-+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- };
-
--static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
-+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_fullspeed_out_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_OUT,
-@@ -484,7 +484,7 @@
- };
-
- #ifdef CONFIG_USB_GADGET_DUALSPEED
--static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
-+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_notify_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
-@@ -493,21 +493,21 @@
- .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
- };
-
--static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
-+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
- };
-
--static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
-+static struct usb_endpoint_descriptor __attribute__((aligned(2))) gs_highspeed_out_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
- };
-
--static struct usb_qualifier_descriptor gs_qualifier_desc = {
-+static struct usb_qualifier_descriptor __attribute__((aligned(2))) gs_qualifier_desc = {
- .bLength = sizeof(struct usb_qualifier_descriptor),
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
-diff -urN linux-2.6.20.4-0rig/drivers/usb/gadget/zero.c linux-2.6.20.4-atmel/drivers/usb/gadget/zero.c
---- linux-2.6.20.4-0rig/drivers/usb/gadget/zero.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/gadget/zero.c 2007-03-24 16:42:28.000000000 +0100
-@@ -221,7 +221,7 @@
- #define CONFIG_LOOPBACK 2
-
- static struct usb_device_descriptor
--device_desc = {
-+device_desc __attribute__((aligned(2))) = {
- .bLength = sizeof device_desc,
- .bDescriptorType = USB_DT_DEVICE,
-
-@@ -237,7 +237,7 @@
- };
-
- static struct usb_config_descriptor
--source_sink_config = {
-+source_sink_config __attribute__((aligned(2))) = {
- .bLength = sizeof source_sink_config,
- .bDescriptorType = USB_DT_CONFIG,
-
-@@ -250,7 +250,7 @@
- };
-
- static struct usb_config_descriptor
--loopback_config = {
-+loopback_config __attribute__((aligned(2))) = {
- .bLength = sizeof loopback_config,
- .bDescriptorType = USB_DT_CONFIG,
-
-@@ -273,7 +273,7 @@
- /* one interface in each configuration */
-
- static const struct usb_interface_descriptor
--source_sink_intf = {
-+source_sink_intf __attribute__((aligned(2))) = {
- .bLength = sizeof source_sink_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -283,7 +283,7 @@
- };
-
- static const struct usb_interface_descriptor
--loopback_intf = {
-+loopback_intf __attribute__((aligned(2))) = {
- .bLength = sizeof loopback_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
-@@ -295,7 +295,7 @@
- /* two full speed bulk endpoints; their use is config-dependent */
-
- static struct usb_endpoint_descriptor
--fs_source_desc = {
-+fs_source_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -304,7 +304,7 @@
- };
-
- static struct usb_endpoint_descriptor
--fs_sink_desc = {
-+fs_sink_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -340,7 +340,7 @@
- */
-
- static struct usb_endpoint_descriptor
--hs_source_desc = {
-+hs_source_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -349,7 +349,7 @@
- };
-
- static struct usb_endpoint_descriptor
--hs_sink_desc = {
-+hs_sink_desc __attribute__((aligned(2))) = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
-@@ -358,7 +358,7 @@
- };
-
- static struct usb_qualifier_descriptor
--dev_qualifier = {
-+dev_qualifier __attribute__((aligned(2))) = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
-diff -urN linux-2.6.20.4-0rig/drivers/usb/host/ohci-at91.c linux-2.6.20.4-atmel/drivers/usb/host/ohci-at91.c
---- linux-2.6.20.4-0rig/drivers/usb/host/ohci-at91.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/usb/host/ohci-at91.c 2007-03-24 16:39:15.000000000 +0100
-@@ -18,19 +18,38 @@
- #include <asm/mach-types.h>
- #include <asm/hardware.h>
- #include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-
- #ifndef CONFIG_ARCH_AT91
- #error "CONFIG_ARCH_AT91 must be defined."
- #endif
-
- /* interface and function clocks */
--static struct clk *iclk, *fclk;
-+static struct clk *iclk, *fclk, *hclock;
- static int clocked;
-
- extern int usb_disabled(void);
-
- /*-------------------------------------------------------------------------*/
-
-+static void at91_start_clock(void)
-+{
-+ if (cpu_is_at91sam9261())
-+ clk_enable(hclock);
-+ clk_enable(iclk);
-+ clk_enable(fclk);
-+ clocked = 1;
-+}
-+
-+static void at91_stop_clock(void)
-+{
-+ clk_disable(fclk);
-+ clk_disable(iclk);
-+ if (cpu_is_at91sam9261())
-+ clk_disable(hclock);
-+ clocked = 0;
-+}
-+
- static void at91_start_hc(struct platform_device *pdev)
- {
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-@@ -41,9 +60,7 @@
- /*
- * Start the USB clocks.
- */
-- clk_enable(iclk);
-- clk_enable(fclk);
-- clocked = 1;
-+ at91_start_clock();
-
- /*
- * The USB host controller must remain in reset.
-@@ -66,9 +83,7 @@
- /*
- * Stop the USB clocks.
- */
-- clk_disable(fclk);
-- clk_disable(iclk);
-- clocked = 0;
-+ at91_stop_clock();
- }
-
-
-@@ -126,6 +141,8 @@
-
- iclk = clk_get(&pdev->dev, "ohci_clk");
- fclk = clk_get(&pdev->dev, "uhpck");
-+ if (cpu_is_at91sam9261())
-+ hclock = clk_get(&pdev->dev, "hck0");
-
- at91_start_hc(pdev);
- ohci_hcd_init(hcd_to_ohci(hcd));
-@@ -137,6 +154,8 @@
- /* Error handling */
- at91_stop_hc(pdev);
-
-+ if (cpu_is_at91sam9261())
-+ clk_put(hclock);
- clk_put(fclk);
- clk_put(iclk);
-
-@@ -170,11 +189,12 @@
- at91_stop_hc(pdev);
- iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-- disable_irq_wake(hcd->irq);
-
-+ if (cpu_is_at91sam9261())
-+ clk_put(hclock);
- clk_put(fclk);
- clk_put(iclk);
-- fclk = iclk = NULL;
-+ fclk = iclk = hclock = NULL;
-
- dev_set_drvdata(&pdev->dev, NULL);
- return 0;
-@@ -271,8 +291,6 @@
-
- if (device_may_wakeup(&pdev->dev))
- enable_irq_wake(hcd->irq);
-- else
-- disable_irq_wake(hcd->irq);
-
- /*
- * The integrated transceivers seem unable to notice disconnect,
-@@ -283,9 +301,7 @@
- */
- if (at91_suspend_entering_slow_clock()) {
- ohci_usb_reset (ohci);
-- clk_disable(fclk);
-- clk_disable(iclk);
-- clocked = 0;
-+ at91_stop_clock();
- }
-
- return 0;
-@@ -293,11 +309,13 @@
-
- static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
- {
-- if (!clocked) {
-- clk_enable(iclk);
-- clk_enable(fclk);
-- clocked = 1;
-- }
-+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
-+
-+ if (device_may_wakeup(&pdev->dev))
-+ disable_irq_wake(hcd->irq);
-+
-+ if (!clocked)
-+ at91_start_clock();
-
- return 0;
- }
-diff -urN linux-2.6.20.4-0rig/drivers/video/atmel_lcdfb.c linux-2.6.20.4-atmel/drivers/video/atmel_lcdfb.c
---- linux-2.6.20.4-0rig/drivers/video/atmel_lcdfb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/atmel_lcdfb.c 2007-03-24 16:39:15.000000000 +0100
-@@ -0,0 +1,781 @@
-+/*
-+ * drivers/video/atmel_lcdfb.c
-+ *
-+ * Driver for AT91/AVR32 LCD Controller
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-+#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
-+
-+/* More or less configurable parameters */
-+#define ATMEL_LCDC_FIFO_SIZE 512
-+#define ATMEL_LCDC_CRST_VAL_DEFAULT 0xc8
-+#define ATMEL_LCDC_DMA_BURST_LEN 16
-+
-+#define LCD_POWER_ON 0
-+#define LCD_POWER_OFF 1
-+
-+#if defined(CONFIG_ARCH_AT91)
-+static inline void atmel_lcdfb_update_dma2d(struct fb_info *info,
-+ struct fb_var_screeninfo *var) { }
-+static inline void atmel_lcdfb_set_2dcfg(struct fb_info *info) { }
-+#elif defined(CONFIG_AVR32)
-+static void atmel_lcdfb_update_dma2d(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ dma2dcfg = lcdc_readl(sinfo, ATMEL_LCDC_DMA2DCFG);
-+ dma2dcfg = LCDC_INSBF(DMA2DCFG_PIXELOFF, pixeloff, dma2dcfg);
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
-+
-+ /* Update configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
-+ lcdc_readl(sinfo, ATMEL_LCDC_DMACON) | LCDC_BIT(DMACON_DMAUPDT));
-+}
-+
-+static void atmel_lcdfb_set_2dcfg(struct fb_info *info)
-+{
-+ /* ...set 2D configuration (necessary for xres_virtual != xres) */
-+ value = LCDC_MKBF(DMA2DCFG_ADDRINC,
-+ info->var.xres_virtual - info->var.xres);
-+ lcdc_writel(sinfo, DMA2DCFG, value);
-+
-+ /* ...wait for DMA engine to become idle... */
-+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & LCDC_BIT(DMACON_DMABUSY))
-+ msleep(10);
-+}
-+#endif
-+
-+
-+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+static u32 pseudo_palette[16] = {
-+ 0x000000,
-+ 0xaa0000,
-+ 0x00aa00,
-+ 0xaa5500,
-+ 0x0000aa,
-+ 0xaa00aa,
-+ 0x00aaaa,
-+ 0xaaaaaa,
-+ 0x555555,
-+ 0xff5555,
-+ 0x55ff55,
-+ 0xffff55,
-+ 0x5555ff,
-+ 0xff55ff,
-+ 0x55ffff,
-+ 0xffffff
-+};
-+
-+static void atmel_lcdfb_update_dma(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ unsigned long dma_addr;
-+
-+ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+ + var->xoffset * var->bits_per_pixel / 8);
-+
-+ dma_addr &= ~3UL;
-+
-+ /* Set framebuffer DMA base address and pixel offset */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-+
-+ atmel_lcdfb_update_dma2d(info, var);
-+}
-+
-+static inline void atmel_lcdfb_unmap_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+
-+ dma_free_writecombine(info->device, sinfo->map_size,
-+ sinfo->map_cpu, sinfo->map_dma);
-+}
-+
-+/**
-+ * atmel_lcdfb_alloc_framebuffer - Allocate framebuffer memory
-+ * @sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_lcdfb_map_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ sinfo->map_size = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
-+
-+ sinfo->map_cpu = dma_alloc_writecombine(info->device, sinfo->map_size,
-+ &sinfo->map_dma, GFP_KERNEL);
-+
-+ if (!sinfo->map_cpu) {
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_lcdfb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct atmel_lcdfb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ struct device *dev = info->device;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long clk_value_khz = 0;
-+
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+ dev_dbg(dev, "%s:\n", __func__);
-+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
-+ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
-+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
-+ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
-+
-+ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
-+ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
-+ return -EINVAL;
-+ }
-+
-+ /* Force same alignment for each line */
-+ var->xres = (var->xres + 3) & ~3UL;
-+ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
-+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+
-+ switch (var->bits_per_pixel) {
-+ case 2:
-+ case 4:
-+ case 8:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ case 15:
-+ case 16:
-+ var->red.offset = 0;
-+ var->green.offset = 5;
-+ var->blue.offset = 10;
-+ var->red.length = var->green.length = var->blue.length = 5;
-+ break;
-+ case 24:
-+ case 32:
-+ var->red.offset = 16;
-+ var->green.offset = 8;
-+ var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length = 8;
-+ break;
-+ default:
-+ dev_err(dev, "color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ var->xoffset = var->yoffset = 0;
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_lcdfb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. atmel_lcdfb_check_var is always called
-+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_lcdfb_set_par(struct fb_info *info)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long value;
-+ unsigned long clk_value_khz = 0;
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ /* Turn off the LCD controller and the DMA controller */
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-+
-+ /* Reset LCDC DMA*/
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
-+
-+ if (info->var.bits_per_pixel <= 8)
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ else
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+
-+ /* Re-initialize the DMA engine... */
-+ dev_dbg(info->device, " * update DMA engine\n");
-+ atmel_lcdfb_update_dma(info, &info->var);
-+
-+ /* ...set frame size and burst length = 8 words (?) */
-+ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
-+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
-+
-+ atmel_lcdfb_set_2dcfg(info);
-+
-+ /* Now, the LCDC core... */
-+
-+ /* Set pixel clock */
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
-+
-+ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-+ value++;
-+
-+ value = (value / 2) - 1;
-+
-+ if (value == 0) {
-+ dev_notice(info->device, "Bypassing pixel clock divider\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-+ } else
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+
-+ /* Initialize control register 2 */
-+ value = sinfo->default_lcdcon2;
-+
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVLINE_INVERTED;
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
-+
-+ switch (info->var.bits_per_pixel) {
-+ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
-+ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
-+ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
-+ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
-+ case 15: /* fall through */
-+ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
-+ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
-+ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
-+ default: BUG(); break;
-+ }
-+ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-+
-+ /* Vertical timing */
-+ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
-+ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
-+ value |= info->var.lower_margin;
-+ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-+
-+ /* Horizontal timing */
-+ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
-+ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
-+ value |= (info->var.left_margin - 1);
-+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-+
-+ /* Display size */
-+ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+ value |= info->var.yres - 1;
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-+
-+ /* FIFO Threshold: Use formula from data sheet */
-+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
-+ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-+
-+ /* Toggle LCD_MODE every frame */
-+ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-+
-+ /* Disable all interrupts */
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-+
-+ // Set contrast
-+ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CRST_VAL_DEFAULT);
-+ /* ...wait for DMA engine to become idle... */
-+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-+ msleep(10);
-+
-+ dev_dbg(info->device, " * re-enable DMA engine\n");
-+ /* ...and enable it with updated configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-+
-+ dev_dbg(info->device, " * re-enable LCDC core\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-+
-+ dev_dbg(info->device, " * DONE\n");
-+
-+ return 0;
-+}
-+
-+static inline u_int chan_to_field(u_int chan, const struct fb_bitfield *bf)
-+{
-+ chan &= 0xffff;
-+ chan >>= 16 - bf->length;
-+ return chan << bf->offset;
-+}
-+
-+/**
-+ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
-+ * @regno: Which register in the CLUT we are programming
-+ * @red: The red value which can be up to 16 bits wide
-+ * @green: The green value which can be up to 16 bits wide
-+ * @blue: The blue value which can be up to 16 bits wide.
-+ * @transp: If supported the alpha value which can be up to 16 bits wide.
-+ * @info: frame buffer info structure
-+ *
-+ * Set a single color register. The values supplied have a 16 bit
-+ * magnitude which needs to be scaled in this function for the hardware.
-+ * Things to take into consideration are how many color registers, if
-+ * any, are supported with the current color visual. With truecolor mode
-+ * no color palettes are supported. Here a psuedo palette is created
-+ * which we store the value in pseudo_palette in struct fb_info. For
-+ * pseudocolor mode we have a limited color palette. To deal with this
-+ * we can program what color is displayed for a particular pixel value.
-+ * DirectColor is similar in that we can program each color field. If
-+ * we have a static colormap we don't need to implement this function.
-+ *
-+ * Returns negative errno on error, or zero on success. In an
-+ * ideal world, this would have been the case, but as it turns
-+ * out, the other drivers return 1 on failure, so that's what
-+ * we're going to do.
-+ */
-+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned int val;
-+ u32 *pal;
-+ int ret = 1;
-+
-+ if (info->var.grayscale)
-+ red = green = blue = (19595 * red + 38470 * green
-+ + 7471 * blue) >> 16;
-+
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ if (regno < 16) {
-+ pal = info->pseudo_palette;
-+
-+ val = chan_to_field(red, &info->var.red);
-+ val |= chan_to_field(green, &info->var.green);
-+ val |= chan_to_field(blue, &info->var.blue);
-+
-+ pal[regno] = val;
-+ ret = 0;
-+ }
-+ break;
-+
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ if (regno < 256) {
-+ val = ((red >> 11) & 0x001f);
-+ val |= ((green >> 6) & 0x03e0);
-+ val |= ((blue >> 1) & 0x7c00);
-+
-+ /*
-+ * TODO: intensity bit. Maybe something like
-+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
-+ */
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_LUT_(regno), val);
-+ ret = 0;
-+ }
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ dev_dbg(info->device, "%s\n", __func__);
-+
-+ atmel_lcdfb_update_dma(info, var);
-+
-+ return 0;
-+}
-+
-+static struct fb_ops atmel_lcdfb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = atmel_lcdfb_check_var,
-+ .fb_set_par = atmel_lcdfb_set_par,
-+ .fb_setcolreg = atmel_lcdfb_setcolreg,
-+ .fb_pan_display = atmel_lcdfb_pan_display,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
-+{
-+ struct fb_info *info = dev_id;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ u32 status;
-+
-+ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
-+ return IRQ_HANDLED;
-+}
-+
-+static int atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ int ret = 0;
-+
-+ info->screen_base = sinfo->map_cpu;
-+ info->fix.smem_start = sinfo->map_dma;
-+ info->fix.smem_len = sinfo->map_size;
-+
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ /* Allocate colormap */
-+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
-+ if (ret < 0)
-+ dev_err(info->device, "Alloc color map failed\n");
-+
-+ return ret;
-+}
-+
-+static int atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+ int ret = 0;
-+
-+ if (sinfo->bus_clk && !IS_ERR(sinfo->bus_clk))
-+ clk_enable(sinfo->bus_clk);
-+ else {
-+ if (cpu_is_at91sam9261()) {
-+ /* not an error for other cpus */
-+ ret = -ENXIO;
-+ }
-+ }
-+
-+ if (sinfo->lcdc_clk && !IS_ERR(sinfo->lcdc_clk))
-+ clk_enable(sinfo->lcdc_clk);
-+ else
-+ ret = -ENXIO;
-+
-+ return ret;
-+}
-+
-+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+ if (sinfo->bus_clk && !IS_ERR(sinfo->bus_clk))
-+ clk_disable(sinfo->bus_clk);
-+ if (sinfo->lcdc_clk && !IS_ERR(sinfo->lcdc_clk))
-+ clk_disable(sinfo->lcdc_clk);
-+}
-+
-+
-+static int atmel_lcdfb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct atmel_lcdfb_info *sinfo;
-+ struct resource *regs = NULL;
-+ struct resource *map = NULL;
-+ int ret;
-+
-+ dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
-+ if (!info) {
-+ dev_err(dev, "cannot allocate memory\n");
-+ goto out;
-+ }
-+
-+ sinfo = info->par;
-+ memcpy(sinfo, dev->platform_data, sizeof(struct atmel_lcdfb_info));
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ strcpy(info->fix.id, sinfo->pdev->name);
-+ info->flags = sinfo->default_flags;
-+ info->pseudo_palette = pseudo_palette;
-+ info->fbops = &atmel_lcdfb_ops;
-+
-+ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+ info->fix = atmel_lcdfb_fix;
-+
-+ /* Enable LCDC Clocks */
-+ if (cpu_is_at91sam9261())
-+ sinfo->bus_clk = clk_get(dev, "hck1");
-+ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
-+ if (atmel_lcdfb_start_clock(sinfo)) {
-+ dev_err(dev, "unable to clock LCDC\n");
-+ goto free_info;
-+ }
-+
-+ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ info->monspecs.modedb_len, info->monspecs.modedb,
-+ sinfo->default_bpp);
-+ if (!ret) {
-+ dev_err(dev, "no suitable video mode found\n");
-+ goto stop_clk;
-+ }
-+
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(dev, "resources unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+ if (sinfo->irq_base < 0) {
-+ dev_err(dev, "unable to get irq\n");
-+ ret = sinfo->irq_base;
-+ goto stop_clk;
-+ }
-+
-+ /* Initialize video memory */
-+ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (map) {
-+ /* use a pre-allocated memory buffer */
-+ sinfo->map_dma = map->start;
-+ sinfo->map_size = map->end - map->start + 1;
-+ if (!request_mem_region(sinfo->map_dma,
-+ sinfo->map_size, pdev->name)) {
-+ ret = -EBUSY;
-+ goto stop_clk;
-+ }
-+
-+ sinfo->map_cpu = ioremap(sinfo->map_dma, sinfo->map_size);
-+ if (!sinfo->map_cpu)
-+ goto release_intmem;
-+ } else {
-+ /* alocate memory buffer */
-+ ret = atmel_lcdfb_map_video_memory(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
-+ goto stop_clk;
-+ }
-+ }
-+
-+ /* LCDC registers */
-+ info->fix.mmio_start = regs->start;
-+ info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "cannot map LCDC registers\n");
-+ goto release_mem;
-+ }
-+
-+ /* interrupt */
-+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
-+ if (ret) {
-+ dev_err(dev, "request_irq failed: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ ret = atmel_lcdfb_init_fbinfo(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "init fbinfo failed: %d\n", ret);
-+ goto unregister_irqs;
-+ }
-+
-+ /*
-+ * This makes sure that our colour bitfield
-+ * descriptors are correctly initialised.
-+ */
-+ atmel_lcdfb_check_var(&info->var, info);
-+ atmel_lcdfb_set_par(info);
-+
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "unable to set display parameters\n");
-+ goto free_cmap;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-+ goto free_cmap;
-+ }
-+
-+ /* Power up the LCDC screen */
-+ if (sinfo->power_control_pin)
-+ at91_set_gpio_value(sinfo->power_control_pin, LCD_POWER_ON);
-+
-+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
-+
-+ return 0;
-+
-+
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ if (map) {
-+ iounmap(sinfo->map_cpu);
-+ } else {
-+ atmel_lcdfb_unmap_video_memory(sinfo);
-+ }
-+
-+release_intmem:
-+ if (map) {
-+ release_mem_region(sinfo->map_dma, sinfo->map_size);
-+ }
-+stop_clk:
-+ atmel_lcdfb_stop_clock(sinfo);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+static int atmel_lcdfb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ if (sinfo->power_control_pin)
-+ at91_set_gpio_value(sinfo->power_control_pin, LCD_POWER_OFF);
-+ unregister_framebuffer(info);
-+ atmel_lcdfb_stop_clock(sinfo);
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+ iounmap(sinfo->map_cpu);
-+ release_mem_region(sinfo->map_dma, sinfo->map_size);
-+ } else {
-+ atmel_lcdfb_unmap_video_memory(sinfo);
-+ }
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+ .probe = atmel_lcdfb_probe,
-+ .remove = atmel_lcdfb_remove,
-+ .driver = {
-+ .name = "atmel_lcdfb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_lcdfb_init(void)
-+{
-+ return platform_driver_register(&atmel_lcdfb_driver);
-+}
-+
-+static void __exit atmel_lcdfb_exit(void)
-+{
-+ platform_driver_unregister(&atmel_lcdfb_driver);
-+}
-+
-+module_init(atmel_lcdfb_init);
-+module_exit(atmel_lcdfb_exit);
-+
-+MODULE_AUTHOR("Atmel Corporation");
-+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/Kconfig linux-2.6.20.4-atmel/drivers/video/backlight/Kconfig
---- linux-2.6.20.4-0rig/drivers/video/backlight/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/backlight/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -42,6 +42,18 @@
- depends on LCD_CLASS_DEVICE
- default y
-
-+config LCD_LTV350QV
-+ tristate "Samsung LTV350QV LCD Panel"
-+ depends on LCD_DEVICE && SPI
-+ default n
-+ help
-+ If you have a Samsung LTV350QV LCD panel, say y to include a
-+ power control driver for it. The panel starts up in power
-+ off state, so you need this driver in order to see any
-+ output.
-+
-+ The LTV350QV panel is present on most ATSTK1000 boards.
-+
- config BACKLIGHT_CORGI
- tristate "Sharp Corgi Backlight Driver (SL Series)"
- depends on BACKLIGHT_DEVICE && PXA_SHARPSL
-diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/ltv350qv.c linux-2.6.20.4-atmel/drivers/video/backlight/ltv350qv.c
---- linux-2.6.20.4-0rig/drivers/video/backlight/ltv350qv.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/backlight/ltv350qv.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,300 @@
-+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/reboot.h>
-+#include <linux/spi/spi.h>
-+
-+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
-+
-+struct ltv350qv {
-+ struct spi_device *spi;
-+ u8 *buffer;
-+ int power;
-+ struct semaphore lock;
-+ struct lcd_device *ld;
-+ struct list_head list;
-+ int halt_done;
-+};
-+
-+static LIST_HEAD(lcd_list);
-+
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer index_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+ struct spi_transfer value_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+
-+ spi_message_init(&msg);
-+
-+ /* register index */
-+ lcd->buffer[0] = 0x74;
-+ lcd->buffer[1] = 0x00;
-+ lcd->buffer[2] = reg & 0x7f;
-+ index_xfer.tx_buf = lcd->buffer;
-+ spi_message_add_tail(&index_xfer, &msg);
-+
-+ /* register value */
-+ lcd->buffer[4] = 0x76;
-+ lcd->buffer[5] = val >> 8;
-+ lcd->buffer[6] = val;
-+ value_xfer.tx_buf = lcd->buffer + 4;
-+ spi_message_add_tail(&value_xfer, &msg);
-+
-+ return spi_sync(lcd->spi, &msg);
-+}
-+
-+#define write_reg(_spi, reg, val) \
-+ do { \
-+ ret = ltv350qv_write_reg(_spi, reg, val); \
-+ if (ret) \
-+ goto out; \
-+ } while (0)
-+
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
-+{
-+ int ret;
-+
-+ write_reg(lcd, 9, 0x0000);
-+ msleep(15);
-+ write_reg(lcd, 9, 0x4000);
-+ write_reg(lcd, 10, 0x2000);
-+ write_reg(lcd, 9, 0x4055);
-+ msleep(55);
-+ write_reg(lcd, 1, 0x409d);
-+ write_reg(lcd, 2, 0x0204);
-+ write_reg(lcd, 3, 0x0100);
-+ write_reg(lcd, 4, 0x3000);
-+ write_reg(lcd, 5, 0x4003);
-+ write_reg(lcd, 6, 0x000a);
-+ write_reg(lcd, 7, 0x0021);
-+ write_reg(lcd, 8, 0x0c00);
-+ write_reg(lcd, 10, 0x0103);
-+ write_reg(lcd, 11, 0x0301);
-+ write_reg(lcd, 12, 0x1f0f);
-+ write_reg(lcd, 13, 0x1f0f);
-+ write_reg(lcd, 14, 0x0707);
-+ write_reg(lcd, 15, 0x0307);
-+ write_reg(lcd, 16, 0x0707);
-+ write_reg(lcd, 17, 0x0000);
-+ write_reg(lcd, 18, 0x0004);
-+ write_reg(lcd, 19, 0x0000);
-+
-+ msleep(20);
-+ write_reg(lcd, 9, 0x4a55);
-+ write_reg(lcd, 5, 0x5003);
-+
-+out:
-+ return ret;
-+}
-+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
-+{
-+ int ret;
-+
-+ /* GON -> 0, POC -> 0 */
-+ write_reg(lcd, 9, 0x4055);
-+ /* DSC -> 0 */
-+ write_reg(lcd, 5, 0x4003);
-+ /* VCOMG -> 0 */
-+ write_reg(lcd, 10, 0x2103);
-+
-+ msleep(1);
-+
-+ /* AP[2:0] -> 000 */
-+ write_reg(lcd, 9, 0x4050);
-+
-+out:
-+ return ret;
-+}
-+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
-+{
-+ int ret = 0;
-+
-+ down(&lcd->lock);
-+
-+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_on(lcd);
-+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_off(lcd);
-+
-+ if (!ret)
-+ lcd->power = power;
-+
-+ up(&lcd->lock);
-+
-+ return ret;
-+}
-+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
-+{
-+ struct ltv350qv *lcd;
-+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return ltv350qv_power(lcd, power);
-+}
-+
-+static int ltv350qv_get_power(struct lcd_device *ld)
-+{
-+ struct ltv350qv *lcd;
-+
-+ lcd = class_get_devdata(&ld->class_dev);
-+ return lcd->power;
-+}
-+
-+static struct lcd_properties lcd_properties = {
-+ .owner = THIS_MODULE,
-+ .get_power = ltv350qv_get_power,
-+ .set_power = ltv350qv_set_power,
-+};
-+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd;
-+ struct lcd_device *ld;
-+ int ret;
-+
-+ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+ if (!lcd)
-+ return -ENOMEM;
-+
-+ lcd->spi = spi;
-+ lcd->power = FB_BLANK_POWERDOWN;
-+ init_MUTEX(&lcd->lock);
-+ lcd->buffer = kzalloc(8, GFP_KERNEL);
-+
-+ spi->mode = SPI_MODE_3;
-+ spi->bits_per_word = 8;
-+ ret = spi_setup(spi);
-+ if (ret)
-+ goto out_free_lcd;
-+
-+ ld = lcd_device_register("ltv350qv", lcd, &lcd_properties);
-+ if (IS_ERR(ld)) {
-+ ret = PTR_ERR(ld);
-+ goto out_free_lcd;
-+ }
-+ lcd->ld = ld;
-+
-+ list_add(&lcd->list, &lcd_list);
-+
-+ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+ if (ret)
-+ goto out_unregister;
-+
-+ dev_set_drvdata(&spi->dev, lcd);
-+
-+ return 0;
-+
-+out_unregister:
-+ lcd_device_unregister(ld);
-+out_free_lcd:
-+ kfree(lcd);
-+ return ret;
-+}
-+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+ list_del(&lcd->list);
-+ lcd_device_unregister(lcd->ld);
-+ kfree(lcd);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+ pm_message_t state, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ if (level == SUSPEND_POWER_DOWN)
-+ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+
-+ return 0;
-+}
-+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
-+
-+ if (level == RESUME_POWER_ON)
-+ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
-+
-+ return 0;
-+}
-+#else
-+#define ltv350qv_suspend NULL
-+#define ltv350qv_resume NULL
-+#endif
-+
-+/* Power down all displays on reboot, poweroff or halt */
-+static int ltv350qv_halt(struct notifier_block *nb, unsigned long event,
-+ void *p)
-+{
-+ struct ltv350qv *lcd;
-+
-+ list_for_each_entry(lcd, &lcd_list, list) {
-+ if (!lcd->halt_done)
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+ lcd->halt_done = 1;
-+ }
-+
-+ return NOTIFY_OK;
-+}
-+
-+static struct spi_driver ltv350qv_driver = {
-+ .driver = {
-+ .name = "ltv350qv",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+
-+ .probe = ltv350qv_probe,
-+ .remove = __devexit_p(ltv350qv_remove),
-+ .suspend = ltv350qv_suspend,
-+ .resume = ltv350qv_resume,
-+};
-+
-+static struct notifier_block ltv350qv_notifier = {
-+ .notifier_call = ltv350qv_halt,
-+};
-+
-+static int __init ltv350qv_init(void)
-+{
-+ register_reboot_notifier(<v350qv_notifier);
-+ return spi_register_driver(<v350qv_driver);
-+}
-+
-+static void __exit ltv350qv_exit(void)
-+{
-+ unregister_reboot_notifier(<v350qv_notifier);
-+ spi_unregister_driver(<v350qv_driver);
-+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
-+
-+MODULE_AUTHOR("Atmel Norway");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/drivers/video/backlight/Makefile linux-2.6.20.4-atmel/drivers/video/backlight/Makefile
---- linux-2.6.20.4-0rig/drivers/video/backlight/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/backlight/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -5,3 +5,4 @@
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-diff -urN linux-2.6.20.4-0rig/drivers/video/fbmem.c linux-2.6.20.4-atmel/drivers/video/fbmem.c
---- linux-2.6.20.4-0rig/drivers/video/fbmem.c 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/fbmem.c 2007-03-24 16:42:29.000000000 +0100
-@@ -1199,6 +1199,10 @@
- pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
- #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-+#elif defined(__avr32__)
-+ vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
-+ & ~_PAGE_CACHABLE)
-+ | (_PAGE_BUFFER | _PAGE_DIRTY));
- #elif defined(__ia64__)
- if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-diff -urN linux-2.6.20.4-0rig/drivers/video/Kconfig linux-2.6.20.4-atmel/drivers/video/Kconfig
---- linux-2.6.20.4-0rig/drivers/video/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -276,6 +276,28 @@
- If you plan to use the LCD display with your SA-1100 system, say
- Y here.
-
-+config FB_SIDSA
-+ tristate "SIDSA LCDC support"
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ depends on FB && AVR32
-+ help
-+ This enables support for the SIDSA LCD Controller.
-+
-+config FB_SIDSA_DEFAULT_BPP
-+ int "SIDSA LCDC default color depth"
-+ default 24
-+ depends on FB_SIDSA
-+ help
-+ Specify the maximum color depth you want to be able to
-+ support. This, together with the resolution of the LCD
-+ panel, determines the amount of framebuffer memory allocated
-+ when the driver is initialized.
-+
-+ Allowable values are 1, 2, 4, 8, 16, 24 and 32. If unsure,
-+ say 24.
-+
- config FB_IMX
- tristate "Motorola i.MX LCD support"
- depends on FB && ARM && ARCH_IMX
-@@ -698,6 +720,22 @@
- working with S1D13806). Product specs at
- <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
-
-+config FB_ATMEL
-+ tristate "AT91/AT32 LCD Controller support"
-+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This enables support for the AT91/AT32 LCD Controller.
-+
-+config FB_INTSRAM
-+ bool "Frame Buffer in internal SRAM"
-+ depends on FB_ATMEL && ARCH_AT91SAM9261
-+ help
-+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-+ to let frame buffer in external SDRAM.
-+
- config FB_NVIDIA
- tristate "nVidia Framebuffer Support"
- depends on FB && PCI
-diff -urN linux-2.6.20.4-0rig/drivers/video/Makefile linux-2.6.20.4-atmel/drivers/video/Makefile
---- linux-2.6.20.4-0rig/drivers/video/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -78,6 +78,7 @@
- obj-$(CONFIG_FB_SUN3) += sun3fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-@@ -100,6 +101,7 @@
- obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
- obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
- obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
-+obj-$(CONFIG_FB_SIDSA) += sidsafb.o
-
- # Platform or fallback drivers go here
- obj-$(CONFIG_FB_VESA) += vesafb.o
-diff -urN linux-2.6.20.4-0rig/drivers/video/sidsafb.c linux-2.6.20.4-atmel/drivers/video/sidsafb.c
---- linux-2.6.20.4-0rig/drivers/video/sidsafb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/drivers/video/sidsafb.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,860 @@
-+/*
-+ * Framebuffer Driver for Atmel/SIDSA LCD Controller
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#undef DEBUG
-+
-+#include <linux/clk.h>
-+#include <linux/completion.h>
-+#include <linux/kernel.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/arch/board.h>
-+
-+#include <asm/periph/lcdc.h>
-+
-+/* More or less configurable parameters */
-+#define SIDSAFB_FIFO_SIZE 512
-+#define SIDSAFB_DMA_BURST_LEN 8
-+
-+/* TODO: These should be autogenerated from part description file */
-+#define LCDC_DISTYPE_STN_MONO 0
-+#define LCDC_DISTYPE_STN_COLOR 1
-+#define LCDC_DISTYPE_TFT 2
-+#define LCDC_LUT 0xc00
-+
-+struct sidsafb_info {
-+ spinlock_t lock;
-+ struct fb_info * info;
-+ void __iomem * regs;
-+ unsigned long irq_base;
-+ int wait_for_vsync;
-+ struct completion vsync_complete;
-+ unsigned int guard_time;
-+ struct clk *hclk;
-+ struct clk *pixclk;
-+ struct platform_device *pdev;
-+ u32 pseudo_palette[16];
-+};
-+
-+/*
-+ * How large framebuffer to allocate if none was provided by the
-+ * platform. This default is the smallest we can possibly get away
-+ * with.
-+ */
-+static unsigned long fb_size = (320 * 240);
-+
-+#if 0
-+static struct fb_videomode sony_modes[] = {
-+ {
-+ .refresh = 48,
-+ .xres = 240, .yres = 160,
-+ .pixclock = 520833,
-+
-+ .left_margin = 7, .right_margin = 9,
-+ .upper_margin = 19, .lower_margin = 20,
-+ .hsync_len = 9, .vsync_len = 2,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+#endif
-+
-+#if 0
-+static struct fb_videomode vga_modes[] = {
-+ {
-+ .refresh = 122,
-+ .xres = 320, .yres = 240,
-+ .pixclock = 80000,
-+
-+ .left_margin = 10, .right_margin = 20,
-+ .upper_margin = 30, .lower_margin = 5,
-+ .hsync_len = 20, .vsync_len = 3,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+ {
-+ .refresh = 70,
-+ .xres = 640, .yres = 480,
-+ .pixclock = 40000,
-+
-+ .left_margin = 10, .right_margin = 20,
-+ .upper_margin = 30, .lower_margin = 5,
-+ .hsync_len = 20, .vsync_len = 3,
-+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+#else
-+static struct fb_videomode samsung_modes[] = {
-+ {
-+ .refresh = 75,
-+ .xres = 320, .yres = 240,
-+ .pixclock = 145111,
-+
-+ .left_margin = 17, .right_margin = 33,
-+ .upper_margin = 10, .lower_margin = 10,
-+ .hsync_len = 16, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_PCLK_RISING,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+#endif
-+
-+#if 1
-+static struct fb_monspecs default_monspecs = {
-+ .modedb = samsung_modes,
-+ .manufacturer = "SNG",
-+ .monitor = "LCD panel",
-+ .serial_no = "xxxx",
-+ .ascii = "yyyy",
-+ .modedb_len = ARRAY_SIZE(samsung_modes),
-+ .hfmin = 14820,
-+ .hfmax = 22230,
-+ .vfmin = 60,
-+ .vfmax = 90,
-+ .dclkmax = 30000000,
-+};
-+#endif
-+
-+#if 0
-+static struct fb_monspecs default_monspecs = {
-+ .modedb = sony_modes,
-+ .manufacturer = "SNY", /* 4 chars?!? */
-+ .monitor = "LCD panel",
-+ .serial_no = "xxxx",
-+ .ascii = "yyyy",
-+ .modedb_len = ARRAY_SIZE(sony_modes),
-+ .hfmin = 7000,
-+ .hfmax = 8000,
-+ .vfmin = 45,
-+ .vfmax = 50,
-+};
-+// #else
-+static struct fb_monspecs default_monspecs = {
-+ .modedb = vga_modes,
-+ .manufacturer = "VGA",
-+ .monitor = "Generic VGA",
-+ .serial_no = "xxxx",
-+ .ascii = "yyyy",
-+ .modedb_len = ARRAY_SIZE(vga_modes),
-+ .hfmin = 30000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+#endif
-+
-+/* Driver defaults */
-+static struct fb_fix_screeninfo sidsafb_fix __devinitdata = {
-+ .id = "sidsafb",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 1,
-+ .ypanstep = 1,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+/*
-+ * Let the user decide whether FBIOPAN_DISPLAY waits for the next
-+ * vsync or not.
-+ */
-+static ssize_t
-+vsync_pan_show(struct device *dev, struct device_attribute *attr, char *buf)
-+{
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct sidsafb_info *sinfo = info->par;
-+
-+ return sprintf(buf, "%d\n", sinfo->wait_for_vsync);
-+}
-+
-+static ssize_t
-+vsync_pan_store(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct sidsafb_info *sinfo = info->par;
-+ unsigned long val;
-+
-+ val = simple_strtoul(buf, NULL, 0);
-+ if (val)
-+ sinfo->wait_for_vsync = 1;
-+ else
-+ sinfo->wait_for_vsync = 0;
-+
-+ return count;
-+}
-+
-+static DEVICE_ATTR(vsync_pan, 0644, vsync_pan_show, vsync_pan_store);
-+
-+static void sidsafb_update_dma(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ struct sidsafb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ unsigned long dma_addr;
-+ unsigned long pixeloff;
-+ unsigned long dma2dcfg;
-+
-+ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+ + var->xoffset * var->bits_per_pixel / 8);
-+
-+ dma_addr &= ~3UL;
-+ pixeloff = LCDC_MKBF(DMA2DCFG_PIXELOFF, var->xoffset * var->bits_per_pixel);
-+
-+ /* Set framebuffer DMA base address and pixel offset */
-+ lcdc_writel(sinfo, DMABADDR1, dma_addr);
-+ dma2dcfg = lcdc_readl(sinfo, DMA2DCFG);
-+ dma2dcfg = LCDC_INSBF(DMA2DCFG_PIXELOFF, pixeloff, dma2dcfg);
-+ lcdc_writel(sinfo, DMA2DCFG, dma2dcfg);
-+
-+ /* Update configuration */
-+ lcdc_writel(sinfo, DMACON, (lcdc_readl(sinfo, DMACON)
-+ | LCDC_BIT(DMACON_DMAUPDT)));
-+}
-+
-+/**
-+ * sidsafb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct sidsafb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int sidsafb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ unsigned long new_fb_size;
-+
-+ pr_debug("sidsafb_check_var:\n");
-+ pr_debug(" resolution: %ux%u\n", var->xres, var->yres);
-+ pr_debug(" pixclk: %llu Hz\n", 1000000000000ULL / var->pixclock);
-+ pr_debug(" bpp: %u\n", var->bits_per_pixel);
-+
-+ new_fb_size = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
-+ if (new_fb_size > info->fix.smem_len) {
-+ printk(KERN_NOTICE
-+ "sidsafb: %uB framebuffer too small for %ux%ux%u\n",
-+ info->fix.smem_len, var->xres_virtual,
-+ var->yres_virtual, var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ /* Force same alignment for each line */
-+ var->xres = (var->xres + 3) & ~3UL;
-+ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
-+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+
-+ switch (var->bits_per_pixel) {
-+ case 2:
-+ case 4:
-+ case 8:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ case 15:
-+ case 16:
-+ /*
-+ * Bit 16 is the "intensity" bit, I think. Not sure
-+ * what we're going to use that for...
-+ */
-+ var->red.offset = 0;
-+ var->green.offset = 5;
-+ var->blue.offset = 10;
-+ var->red.length = 5;
-+ var->green.length = 5;
-+ var->blue.length = 5;
-+ break;
-+ case 32:
-+ var->transp.offset = 24;
-+ var->transp.length = 8;
-+ /* fall through */
-+ case 24:
-+ var->red.offset = 16;
-+ var->green.offset = 8;
-+ var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length = 8;
-+ break;
-+ default:
-+ printk(KERN_NOTICE "sidsafb: color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ var->xoffset = var->yoffset = 0;
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+/**
-+ * sidsafb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. sidsafb_check_var is always called
-+ * before sidsafb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int sidsafb_set_par(struct fb_info *info)
-+{
-+ struct sidsafb_info *sinfo = info->par;
-+ unsigned long value;
-+
-+ pr_debug("sidsafb_set_par:\n");
-+ pr_debug(" * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ /* Turn off the LCD controller and the DMA controller */
-+ pr_debug("writing 0x%08x to %p\n",
-+ LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time),
-+ sinfo->regs + LCDC_PWRCON);
-+ lcdc_writel(sinfo, PWRCON,
-+ LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time));
-+ pr_debug("writing 0 to %p\n", sinfo->regs + LCDC_DMACON);
-+ lcdc_writel(sinfo, DMACON, 0);
-+
-+ info->fix.line_length = (info->var.xres_virtual
-+ * (info->var.bits_per_pixel / 8));
-+
-+ if (info->var.bits_per_pixel <= 8)
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ else
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+ /* Re-initialize the DMA engine... */
-+ pr_debug(" * update DMA engine\n");
-+ sidsafb_update_dma(info, &info->var);
-+
-+ /* ...set frame size and burst length = 8 words (?) */
-+ value = LCDC_MKBF(DMAFRMCFG_FRMSIZE,
-+ (info->var.yres * info->fix.line_length + 3) / 4);
-+ value |= LCDC_MKBF(DMAFRMCFG_BRSTLEN, (SIDSAFB_DMA_BURST_LEN - 1));
-+ lcdc_writel(sinfo, DMAFRMCFG, value);
-+
-+ /* ...set 2D configuration (necessary for xres_virtual != xres) */
-+ value = LCDC_MKBF(DMA2DCFG_ADDRINC,
-+ info->var.xres_virtual - info->var.xres);
-+ lcdc_writel(sinfo, DMA2DCFG, value);
-+
-+ /* ...wait for DMA engine to become idle... */
-+ while (lcdc_readl(sinfo, DMACON) & LCDC_BIT(DMACON_DMABUSY))
-+ msleep(10);
-+
-+ pr_debug(" * re-enable DMA engine\n");
-+ /* ...and enable it with updated configuration */
-+ lcdc_writel(sinfo, DMACON, (LCDC_BIT(DMACON_DMAEN)
-+ | LCDC_BIT(DMACON_DMAUPDT)
-+ | LCDC_BIT(DMACON_DMA2DEN)));
-+
-+ /* Now, the LCD core... */
-+
-+ /* Set pixel clock. */
-+ value = (clk_get_rate(sinfo->pixclk) / 100000) * info->var.pixclock;
-+ value /= 10000000;
-+ value = (value + 1) / 2;
-+ if (value == 0) {
-+ printk("sidsafb: Bypassing lcdc_pclk divider\n");
-+ lcdc_writel(sinfo, LCDCON1, LCDC_BIT(LCDCON1_BYPASS));
-+ } else {
-+ lcdc_writel(sinfo, LCDCON1, LCDC_MKBF(LCDCON1_CLKVAL, value - 1));
-+ }
-+
-+ /* Initialize control register 2 */
-+ value = (LCDC_BIT(LCDCON2_CLKMOD)
-+ | LCDC_MKBF(LCDCON2_DISTYPE, LCDC_DISTYPE_TFT));
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ value |= LCDC_BIT(LCDCON2_INVLINE);
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ value |= LCDC_BIT(LCDCON2_INVFRAME);
-+ if (info->var.sync & FB_SYNC_PCLK_RISING)
-+ value |= LCDC_BIT(LCDCON2_INVCLK);
-+
-+ switch (info->var.bits_per_pixel) {
-+ case 1: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 0); break;
-+ case 2: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 1); break;
-+ case 4: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 2); break;
-+ case 8: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 3); break;
-+ case 15: /* fall through */
-+ case 16: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 4); break;
-+ case 24: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 5); break;
-+ case 32: value |= LCDC_MKBF(LCDCON2_PIXELSIZE, 6); break;
-+ default: BUG(); break;
-+ }
-+ pr_debug(" * LCDCON2 = %08lx\n", value);
-+ lcdc_writel(sinfo, LCDCON2, value);
-+
-+ /* Vertical timing */
-+ value = LCDC_MKBF(LCDTIM1_VPW, info->var.vsync_len - 1);
-+ value |= LCDC_MKBF(LCDTIM1_VBP, info->var.upper_margin);
-+ value |= LCDC_MKBF(LCDTIM1_VFP, info->var.lower_margin);
-+ pr_debug(" * LCDTIM1 = %08lx\n", value);
-+ lcdc_writel(sinfo, LCDTIM1, value);
-+
-+ /* Horizontal timing */
-+ value = LCDC_MKBF(LCDTIM2_HFP, info->var.right_margin - 1);
-+ value |= LCDC_MKBF(LCDTIM2_HPW, info->var.hsync_len - 1);
-+ value |= LCDC_MKBF(LCDTIM2_HBP, info->var.left_margin - 1);
-+ pr_debug(" * LCDTIM2 = %08lx\n", value);
-+ lcdc_writel(sinfo, LCDTIM2, value);
-+
-+ /* Display size */
-+ value = LCDC_MKBF(LCDFRMCFG_LINESIZE, info->var.xres - 1);
-+ value |= LCDC_MKBF(LCDFRMCFG_LINEVAL, info->var.yres - 1);
-+ lcdc_writel(sinfo, LCDFRMCFG, value);
-+
-+ /* FIFO Threshold: Use formula from data sheet */
-+ value = SIDSAFB_FIFO_SIZE - (2 * SIDSAFB_DMA_BURST_LEN + 3);
-+ lcdc_writel(sinfo, LCDFIFO, value);
-+
-+ /* Toggle LCD_MODE every frame */
-+ lcdc_writel(sinfo, LCDMVAL, 0);
-+
-+ /* Disable all interrupts */
-+ lcdc_writel(sinfo, LCD_IDR, ~0UL);
-+
-+ /* Wait for the LCDC core to become idle and enable it */
-+ while(lcdc_readl(sinfo, PWRCON) & LCDC_BIT(PWRCON_LCD_BUSY))
-+ msleep(10);
-+
-+ pr_debug(" * re-enable LCD core\n");
-+ lcdc_writel(sinfo, PWRCON,
-+ LCDC_MKBF(PWRCON_GUARD_TIME, sinfo->guard_time)
-+ | LCDC_BIT(PWRCON_LCD_PWR));
-+
-+ pr_debug(" * DONE\n");
-+ return 0;
-+}
-+
-+static inline u_int chan_to_field(u_int chan, const struct fb_bitfield *bf)
-+{
-+ chan &= 0xffff;
-+ chan >>= 16 - bf->length;
-+ return chan << bf->offset;
-+}
-+
-+/**
-+ * sidsafb_setcolreg - Optional function. Sets a color register.
-+ * @regno: Which register in the CLUT we are programming
-+ * @red: The red value which can be up to 16 bits wide
-+ * @green: The green value which can be up to 16 bits wide
-+ * @blue: The blue value which can be up to 16 bits wide.
-+ * @transp: If supported the alpha value which can be up to 16 bits wide.
-+ * @info: frame buffer info structure
-+ *
-+ * Set a single color register. The values supplied have a 16 bit
-+ * magnitude which needs to be scaled in this function for the hardware.
-+ * Things to take into consideration are how many color registers, if
-+ * any, are supported with the current color visual. With truecolor mode
-+ * no color palettes are supported. Here a psuedo palette is created
-+ * which we store the value in pseudo_palette in struct fb_info. For
-+ * pseudocolor mode we have a limited color palette. To deal with this
-+ * we can program what color is displayed for a particular pixel value.
-+ * DirectColor is similar in that we can program each color field. If
-+ * we have a static colormap we don't need to implement this function.
-+ *
-+ * Returns negative errno on error, or zero on success. In an
-+ * ideal world, this would have been the case, but as it turns
-+ * out, the other drivers return 1 on failure, so that's what
-+ * we're going to do.
-+ */
-+static int sidsafb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
-+{
-+ struct sidsafb_info *sinfo = info->par;
-+ unsigned int val;
-+ u32 *pal;
-+ int ret = 1;
-+
-+ if (info->var.grayscale)
-+ red = green = blue = (19595 * red + 38470 * green
-+ + 7471 * blue) >> 16;
-+
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ if (regno < 16) {
-+ pal = info->pseudo_palette;
-+
-+ val = chan_to_field(red, &info->var.red);
-+ val |= chan_to_field(green, &info->var.green);
-+ val |= chan_to_field(blue, &info->var.blue);
-+
-+ pal[regno] = val;
-+ ret = 0;
-+ }
-+ break;
-+
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ if (regno < 256) {
-+ val = ((red >> 11) & 0x001f);
-+ val |= ((green >> 6) & 0x03e0);
-+ val |= ((blue >> 1) & 0x7c00);
-+
-+ /*
-+ * TODO: intensity bit. Maybe something like
-+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
-+ */
-+
-+ lcdc_writel(sinfo, LUT + regno * 4, val);
-+ ret = 0;
-+ }
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int sidsafb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ struct sidsafb_info *sinfo = info->par;
-+
-+ pr_debug("sidsafb_pan_display\n");
-+
-+ sidsafb_update_dma(info, var);
-+
-+ if (sinfo->wait_for_vsync) {
-+ spin_lock_irq(&sinfo->lock);
-+ lcdc_writel(sinfo, LCD_ICR, LCDC_BIT(LCD_ICR_EOFIC));
-+ lcdc_writel(sinfo, LCD_IER, LCDC_BIT(LCD_IER_EOFIE));
-+ init_completion(&sinfo->vsync_complete);
-+ lcdc_readl(sinfo, LCD_IMR);
-+ spin_unlock_irq(&sinfo->lock);
-+
-+ wait_for_completion(&sinfo->vsync_complete);
-+
-+ lcdc_writel(sinfo, LCD_IDR, LCDC_BIT(LCD_IDR_EOFID));
-+ }
-+
-+ return 0;
-+}
-+
-+static struct fb_ops sidsafb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = sidsafb_check_var,
-+ .fb_set_par = sidsafb_set_par,
-+ .fb_setcolreg = sidsafb_setcolreg,
-+ .fb_pan_display = sidsafb_pan_display,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+static irqreturn_t sidsafb_interrupt(int irq, void *dev_id)
-+{
-+ struct fb_info *info = dev_id;
-+ struct sidsafb_info *sinfo = info->par;
-+ u32 status;
-+
-+ status = lcdc_readl(sinfo, LCD_ISR);
-+ while (status) {
-+ if (status & LCDC_BIT(LCD_ISR_EOFIS)) {
-+ pr_debug("sidsafb: DMA End Of Frame interrupt\n");
-+
-+ lcdc_writel(sinfo, LCD_ICR, LCDC_BIT(LCD_ICR_EOFIC));
-+ status &= ~LCDC_BIT(LCD_ISR_EOFIS);
-+ complete(&sinfo->vsync_complete);
-+ }
-+
-+ if (status) {
-+ printk(KERN_ERR
-+ "LCDC: Interrupts still pending: 0x%x\n",
-+ status);
-+ lcdc_writel(sinfo, LCD_IDR, status);
-+ }
-+
-+ status = lcdc_readl(sinfo, LCD_ISR);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void __devinit init_pseudo_palette(u32 *palette)
-+{
-+ static const u32 init_palette[16] = {
-+ 0x000000,
-+ 0xaa0000,
-+ 0x00aa00,
-+ 0xaa5500,
-+ 0x0000aa,
-+ 0xaa00aa,
-+ 0x00aaaa,
-+ 0xaaaaaa,
-+ 0x555555,
-+ 0xff5555,
-+ 0x55ff55,
-+ 0xffff55,
-+ 0x5555ff,
-+ 0xff55ff,
-+ 0x55ffff,
-+ 0xffffff
-+ };
-+
-+ memcpy(palette, init_palette, sizeof(init_palette));
-+}
-+
-+static int __devinit sidsafb_set_fbinfo(struct sidsafb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+
-+ init_pseudo_palette(sinfo->pseudo_palette);
-+
-+ info->flags = (FBINFO_DEFAULT
-+ | FBINFO_PARTIAL_PAN_OK
-+ | FBINFO_HWACCEL_XPAN
-+ | FBINFO_HWACCEL_YPAN);
-+ memcpy(&info->fix, &sidsafb_fix, sizeof(info->fix));
-+ memcpy(&info->monspecs, &default_monspecs, sizeof(info->monspecs));
-+ info->fbops = &sidsafb_ops;
-+ info->pseudo_palette = sinfo->pseudo_palette;
-+
-+ return 0;
-+}
-+
-+static int __devinit sidsafb_probe(struct platform_device *pdev)
-+{
-+ struct lcdc_platform_data *fb_data = pdev->dev.platform_data;
-+ struct fb_info *info;
-+ struct sidsafb_info *sinfo;
-+ const struct resource *mmio_resource;
-+ int ret;
-+
-+ pr_debug("sidsafb_probe BEGIN\n");
-+
-+ mmio_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!mmio_resource) {
-+ dev_err(&pdev->dev, "no MMIO resource found\n");
-+ return -ENXIO;
-+ }
-+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct sidsafb_info), &pdev->dev);
-+ if (!info) {
-+ dev_err(&pdev->dev, "failed to allocate memory\n");
-+ goto out;
-+ }
-+
-+ sinfo = info->par;
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+ sinfo->guard_time = 1;
-+
-+ spin_lock_init(&sinfo->lock);
-+ sidsafb_set_fbinfo(sinfo);
-+ info->fix.mmio_start = mmio_resource->start;
-+ info->fix.mmio_len = mmio_resource->end - mmio_resource->start + 1;
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+
-+ sinfo->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(sinfo->hclk)) {
-+ dev_err(&pdev->dev, "failed to get hclk\n");
-+ ret = PTR_ERR(sinfo->hclk);
-+ goto free_info;
-+ }
-+ sinfo->pixclk = clk_get(&pdev->dev, "pixclk");
-+ if (IS_ERR(sinfo->pixclk)) {
-+ dev_err(&pdev->dev, "failed to get pixel clock\n");
-+ ret = PTR_ERR(sinfo->hclk);
-+ goto put_hclk;
-+ }
-+
-+ clk_enable(sinfo->hclk);
-+ clk_enable(sinfo->pixclk);
-+
-+ /* Use platform-supplied framebuffer memory if available */
-+ if (fb_data && fb_data->fbmem_size != 0) {
-+ info->fix.smem_start = fb_data->fbmem_start;
-+ info->fix.smem_len = fb_data->fbmem_size;
-+ info->screen_base = ioremap(info->fix.smem_start,
-+ info->fix.smem_len);
-+ } else {
-+ dma_addr_t paddr;
-+
-+ info->fix.smem_len = fb_size;
-+ info->screen_base = dma_alloc_coherent(&pdev->dev, fb_size,
-+ &paddr, GFP_KERNEL);
-+ info->fix.smem_start = paddr;
-+ }
-+
-+ if (!info->screen_base) {
-+ printk(KERN_ERR "sidsafb: Could not allocate framebuffer\n");
-+ goto disable_clocks;
-+ }
-+
-+ sinfo->regs = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->regs) {
-+ printk(KERN_ERR "sidsafb: Could not map LCDC registers\n");
-+ goto free_fb;
-+ }
-+
-+ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ info->monspecs.modedb_len, info->monspecs.modedb,
-+ CONFIG_FB_SIDSA_DEFAULT_BPP);
-+ if (!ret) {
-+ printk(KERN_ERR "sidsafb: No suitable video mode found\n");
-+ goto unmap_regs;
-+ }
-+
-+ ret = request_irq(sinfo->irq_base, sidsafb_interrupt, 0,
-+ "sidsafb", info);
-+ if (ret)
-+ goto unmap_regs;
-+
-+ /* Allocate colormap */
-+ if (fb_alloc_cmap(&info->cmap, 256, 0)) {
-+ ret = -ENOMEM;
-+ goto unregister_irqs;
-+ }
-+
-+ platform_set_drvdata(pdev, info);
-+ ret = device_create_file(&pdev->dev, &dev_attr_vsync_pan);
-+ if (ret)
-+ goto free_cmap;
-+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret)
-+ goto remove_attrs;
-+
-+ printk("fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->regs, sinfo->irq_base);
-+
-+ memset_io(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+ ret = fb_set_var(info, &info->var);
-+ if (ret)
-+ printk(KERN_WARNING
-+ "sidsafb: Unable to set display parameters\n");
-+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+ pr_debug("sidsafb_probe SUCCESS\n");
-+ return 0;
-+
-+
-+remove_attrs:
-+ device_remove_file(&pdev->dev, &dev_attr_vsync_pan);
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+unmap_regs:
-+ iounmap(sinfo->regs);
-+free_fb:
-+ if (!fb_data || fb_data->fbmem_size == 0)
-+ dma_free_coherent(&pdev->dev, info->fix.smem_len,
-+ (void __force *)info->screen_base,
-+ info->fix.smem_start);
-+disable_clocks:
-+ clk_disable(sinfo->pixclk);
-+ clk_disable(sinfo->hclk);
-+ clk_put(sinfo->pixclk);
-+put_hclk:
-+ clk_put(sinfo->hclk);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ pr_debug("sidsafb_probe FAILED\n");
-+ return ret;
-+}
-+
-+static int __devexit sidsafb_remove(struct platform_device *pdev)
-+{
-+ struct lcdc_platform_data *fb_data = pdev->dev.platform_data;
-+ struct fb_info *info = platform_get_drvdata(pdev);
-+ struct sidsafb_info *sinfo;
-+
-+ if (!info)
-+ return 0;
-+ sinfo = info->par;
-+
-+ /* TODO: Restore original state */
-+ unregister_framebuffer(info);
-+
-+ device_remove_file(&pdev->dev, &dev_attr_vsync_pan);
-+
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->regs);
-+ if (!fb_data || fb_data->fbmem_size == 0)
-+ dma_free_coherent(&pdev->dev, info->fix.smem_len,
-+ (void __force *)info->screen_base,
-+ info->fix.smem_start);
-+ clk_disable(sinfo->hclk);
-+ clk_put(sinfo->hclk);
-+ platform_set_drvdata(pdev, NULL);
-+ framebuffer_release(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver sidsafb_driver = {
-+ .probe = sidsafb_probe,
-+ .remove = __devexit_p(sidsafb_remove),
-+ .driver = {
-+ .name = "lcdc",
-+ },
-+};
-+
-+int __init sidsafb_init(void)
-+{
-+ return platform_driver_register(&sidsafb_driver);
-+}
-+
-+static void __exit sidsafb_exit(void)
-+{
-+ platform_driver_unregister(&sidsafb_driver);
-+}
-+
-+module_init(sidsafb_init);
-+module_exit(sidsafb_exit);
-+
-+module_param(fb_size, ulong, 0644);
-+MODULE_PARM_DESC(fb_size, "Minimum framebuffer size to allocate");
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Atmel/SIDSA LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_dbgu.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_dbgu.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_dbgu.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_dbgu.h 2007-03-24 16:39:15.000000000 +0100
-@@ -35,6 +35,20 @@
- #define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
- #define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
- #define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
-+#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
-+#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
-+#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
-+#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
-+#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
-+#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
-+#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
-+#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
-+#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
-+#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
-+#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
-+#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
-+#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
-+#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
- #define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
- #define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
- #define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_mci.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_mci.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_mci.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_mci.h 2007-03-24 16:39:15.000000000 +0100
-@@ -26,6 +26,9 @@
- #define AT91_MCI_MR 0x04 /* Mode Register */
- #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
- #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
-+#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
-+#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
-+#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
- #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
- #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
- #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_pdc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_pdc.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_pdc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_pdc.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,36 +0,0 @@
--/*
-- * include/asm-arm/arch-at91rm9200/at91_pdc.h
-- *
-- * Copyright (C) 2005 Ivan Kokshaysky
-- * Copyright (C) SAN People
-- *
-- * Peripheral Data Controller (PDC) registers.
-- * Based on AT91RM9200 datasheet revision E.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef AT91_PDC_H
--#define AT91_PDC_H
--
--#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
--#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
--#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
--#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
--#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
--#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
--#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
--#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
--
--#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
--#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
--#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
--#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
--#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
--
--#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
--
--#endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_rstc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_rstc.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91_rstc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91_rstc.h 2007-03-24 16:39:16.000000000 +0100
-@@ -17,7 +17,7 @@
- #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
- #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
- #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
--#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
-+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
-
- #define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
- #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
-@@ -34,6 +34,5 @@
- #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
- #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
- #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
--#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
-
- #endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260.h 2007-03-24 16:39:16.000000000 +0100
-@@ -113,6 +113,10 @@
-
- #define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
-
-+#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
-+#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-+
-+
- #if 0
- /*
- * PIO pin definitions (peripheral A/B multiplexing).
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h 2007-03-24 16:39:16.000000000 +0100
-@@ -18,7 +18,7 @@
- #define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
- #define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
- #define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
--#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
-+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
- #define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
- #define AT91_MATRIX_ULBT_INFINITE (0 << 0)
- #define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263.h 2007-03-24 16:39:16.000000000 +0100
-@@ -0,0 +1,131 @@
-+/*
-+ * include/asm-arm/arch-at91rm9200/at91sam9263.h
-+ *
-+ * (C) 2007 Atmel Corporation.
-+ *
-+ * Common definitions.
-+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9263_H
-+#define AT91SAM9263_H
-+
-+/*
-+ * Peripheral identifiers/interrupts.
-+ */
-+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-+#define AT91_ID_SYS 1 /* System Peripherals */
-+#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
-+#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
-+#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
-+#define AT91SAM9263_ID_US0 7 /* USART 0 */
-+#define AT91SAM9263_ID_US1 8 /* USART 1 */
-+#define AT91SAM9263_ID_US2 9 /* USART 2 */
-+#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
-+#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
-+#define AT91SAM9263_ID_CAN 12 /* CAN */
-+#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
-+#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
-+#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
-+#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
-+#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
-+#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
-+#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
-+#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
-+#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
-+#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
-+#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
-+#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
-+#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
-+#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
-+#define AT91SAM9263_ID_UHP 29 /* USB Host port */
-+#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-+#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-+
-+
-+/*
-+ * User Peripheral physical base addresses.
-+ */
-+#define AT91SAM9263_BASE_UDP 0xfff78000
-+#define AT91SAM9263_BASE_TCB0 0xfff7c000
-+#define AT91SAM9263_BASE_TC0 0xfff7c000
-+#define AT91SAM9263_BASE_TC1 0xfff7c040
-+#define AT91SAM9263_BASE_TC2 0xfff7c080
-+#define AT91SAM9263_BASE_MCI0 0xfff80000
-+#define AT91SAM9263_BASE_MCI1 0xfff84000
-+#define AT91SAM9263_BASE_TWI 0xfff88000
-+#define AT91SAM9263_BASE_US0 0xfff8c000
-+#define AT91SAM9263_BASE_US1 0xfff90000
-+#define AT91SAM9263_BASE_US2 0xfff94000
-+#define AT91SAM9263_BASE_SSC0 0xfff98000
-+#define AT91SAM9263_BASE_SSC1 0xfff9c000
-+#define AT91SAM9263_BASE_AC97C 0xfffa0000
-+#define AT91SAM9263_BASE_SPI0 0xfffa4000
-+#define AT91SAM9263_BASE_SPI1 0xfffa8000
-+#define AT91SAM9263_BASE_CAN 0xfffac000
-+#define AT91SAM9263_BASE_PWMC 0xfffb8000
-+#define AT91SAM9263_BASE_EMAC 0xfffbc000
-+#define AT91SAM9263_BASE_ISI 0xfffc4000
-+#define AT91SAM9263_BASE_2DGE 0xfffc8000
-+#define AT91_BASE_SYS 0xffffe000
-+
-+/*
-+ * System Peripherals (offset from AT91_BASE_SYS)
-+ */
-+#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
-+#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
-+#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
-+#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
-+#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
-+#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
-+#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
-+#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
-+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
-+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-+#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
-+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-+#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-+
-+#define AT91_SMC AT91_SMC0
-+
-+/*
-+ * Internal Memory.
-+ */
-+#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
-+#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
-+
-+#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
-+#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-+
-+#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
-+#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-+
-+#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
-+#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
-+#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
-+
-+#if 0
-+/*
-+ * PIO pin definitions (peripheral A/B multiplexing).
-+ */
-+
-+// TODO: Add
-+
-+#endif
-+
-+#endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h 2007-03-24 16:39:16.000000000 +0100
-@@ -0,0 +1,129 @@
-+/*
-+ * include/asm-arm/arch-at91rm9200/at91sam9263_matrix.h
-+ *
-+ * Copyright (C) 2006 Atmel Corporation.
-+ *
-+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91SAM9263_MATRIX_H
-+#define AT91SAM9263_MATRIX_H
-+
-+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-+
-+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-+
-+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-+
-+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-+#define AT91_MATRIX_RCB2 (1 << 2)
-+#define AT91_MATRIX_RCB3 (1 << 3)
-+#define AT91_MATRIX_RCB4 (1 << 4)
-+#define AT91_MATRIX_RCB5 (1 << 5)
-+#define AT91_MATRIX_RCB6 (1 << 6)
-+#define AT91_MATRIX_RCB7 (1 << 7)
-+#define AT91_MATRIX_RCB8 (1 << 8)
-+
-+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-+#define AT91_MATRIX_ITCM_0 (0 << 0)
-+#define AT91_MATRIX_ITCM_16 (5 << 0)
-+#define AT91_MATRIX_ITCM_32 (6 << 0)
-+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-+#define AT91_MATRIX_DTCM_0 (0 << 4)
-+#define AT91_MATRIX_DTCM_16 (5 << 4)
-+#define AT91_MATRIX_DTCM_32 (6 << 4)
-+
-+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
-+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
-+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
-+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
-+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
-+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
-+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
-+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
-+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
-+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
-+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
-+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
-+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
-+
-+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
-+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
-+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
-+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
-+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
-+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
-+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
-+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
-+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
-+
-+#endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h 2007-03-24 16:39:16.000000000 +0100
-@@ -131,4 +131,11 @@
- #define AT91_SMC_PS_16 (2 << 28)
- #define AT91_SMC_PS_32 (3 << 28)
-
-+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-+#endif
-+
- #endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/board.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/board.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/board.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/board.h 2007-03-24 16:39:16.000000000 +0100
-@@ -34,6 +34,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/device.h>
- #include <linux/spi/spi.h>
-+#include <video/atmel_lcdc.h>
-
- /* USB Device */
- struct at91_udc_data {
-@@ -60,18 +61,23 @@
- u8 wp_pin; /* (SD) writeprotect detect */
- u8 vcc_pin; /* power switching (high == on) */
- };
--extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
-+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
-- /* Ethernet */
-+/* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
- };
- extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
-+#define eth_platform_data at91_eth_data
-+#endif
-+
- /* USB Host */
- struct at91_usbh_data {
- u8 ports; /* number of ports on root hub */
-+ u8 vbus_pin[]; /* port power switch */
- };
- extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
-@@ -93,6 +99,9 @@
- /* SPI */
- extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
-+ /* LCD Controler */
-+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-+
- /* Serial */
- struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
-@@ -114,4 +123,13 @@
- extern u8 at91_leds_timer;
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-
-+struct at91_gpio_led {
-+ u8 index; /* index of LED */
-+ char* name; /* name of LED */
-+ u8 gpio; /* AT91_PIN_xx */
-+ u8 flags; /* 1=active-high */
-+ char* trigger; /* default trigger */
-+};
-+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
-+
- #endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/cpu.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/cpu.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/cpu.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/cpu.h 2007-03-24 16:39:16.000000000 +0100
-@@ -20,7 +20,11 @@
- #define ARCH_ID_AT91RM9200 0x09290780
- #define ARCH_ID_AT91SAM9260 0x019803a0
- #define ARCH_ID_AT91SAM9261 0x019703a0
-+#define ARCH_ID_AT91SAM9263 0x019607a0
-
-+#define ARCH_ID_AT91SAM9XE128 0x329973a0
-+#define ARCH_ID_AT91SAM9XE256 0x329a93a0
-+#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-
- static inline unsigned long at91_cpu_identify(void)
- {
-@@ -28,6 +32,16 @@
- }
-
-
-+#define ARCH_FAMILY_AT91X92 0x09200000
-+#define ARCH_FAMILY_AT91SAM9 0x01900000
-+#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-+
-+static inline unsigned long at91_arch_identify(void)
-+{
-+ return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
-+}
-+
-+
- #ifdef CONFIG_ARCH_AT91RM9200
- #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
- #else
-@@ -35,8 +49,10 @@
- #endif
-
- #ifdef CONFIG_ARCH_AT91SAM9260
--#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
-+#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
-+#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
- #else
-+#define cpu_is_at91sam9xe() (0)
- #define cpu_is_at91sam9260() (0)
- #endif
-
-@@ -46,4 +62,10 @@
- #define cpu_is_at91sam9261() (0)
- #endif
-
-+#ifdef CONFIG_ARCH_AT91SAM9263
-+#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
-+#else
-+#define cpu_is_at91sam9263() (0)
-+#endif
-+
- #endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/debug-macro.S linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/debug-macro.S
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/debug-macro.S 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/debug-macro.S 2007-03-24 16:39:16.000000000 +0100
-@@ -16,24 +16,24 @@
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
-- tst \rx, #1 @ MMU enabled?
-- ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
-- ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
-+ tst \rx, #1 @ MMU enabled?
-+ ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
-+ ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
- .endm
-
- .macro senduart,rd,rx
-- strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
-+ strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
- .endm
-
- .macro waituart,rd,rx
--1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
-- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
-+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
-+ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
--1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
-- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
-+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
-+ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
- beq 1001b
- .endm
-
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/entry-macro.S linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/entry-macro.S
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/entry-macro.S 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/entry-macro.S 2007-03-24 16:39:16.000000000 +0100
-@@ -17,10 +17,10 @@
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-- ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
-- ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-- ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
-- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
-- streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
-+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
-+ ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-+ ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
-+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
-+ streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
- .endm
-
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/gpio.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/gpio.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/gpio.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/gpio.h 2007-03-24 16:39:16.000000000 +0100
-@@ -17,7 +17,7 @@
-
- #define PIN_BASE NR_AIC_IRQS
-
--#define MAX_GPIO_BANKS 4
-+#define MAX_GPIO_BANKS 5
-
- /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-@@ -26,37 +26,31 @@
- #define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
- #define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
- #define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
--
- #define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
- #define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
- #define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
- #define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
- #define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
--
- #define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
- #define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
- #define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
- #define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
- #define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
--
- #define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
- #define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
- #define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
- #define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
- #define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
--
- #define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
- #define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
- #define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
- #define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
- #define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
--
- #define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
- #define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
- #define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
- #define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
- #define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
--
- #define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
- #define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
-
-@@ -65,37 +59,31 @@
- #define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
- #define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
- #define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
--
- #define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
- #define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
- #define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
- #define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
- #define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
--
- #define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
- #define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
- #define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
- #define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
- #define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
--
- #define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
- #define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
- #define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
- #define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
- #define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
--
- #define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
- #define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
- #define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
- #define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
- #define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
--
- #define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
- #define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
- #define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
- #define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
- #define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
--
- #define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
- #define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
-
-@@ -104,37 +92,31 @@
- #define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
- #define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
- #define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
--
- #define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
- #define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
- #define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
- #define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
- #define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
--
- #define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
- #define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
- #define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
- #define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
- #define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
--
- #define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
- #define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
- #define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
- #define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
- #define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
--
- #define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
- #define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
- #define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
- #define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
- #define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
--
- #define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
- #define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
- #define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
- #define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
- #define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
--
- #define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
- #define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
-
-@@ -143,40 +125,67 @@
- #define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
- #define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
- #define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
--
- #define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
- #define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
- #define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
- #define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
- #define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
--
- #define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
- #define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
- #define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
- #define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
- #define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
--
- #define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
- #define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
- #define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
- #define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
- #define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
--
- #define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
- #define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
- #define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
- #define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
- #define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
--
- #define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
- #define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
- #define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
- #define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
- #define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
--
- #define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
- #define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
-
-+#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
-+#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
-+#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
-+#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
-+#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
-+#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
-+#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
-+#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
-+#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
-+#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
-+#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
-+#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
-+#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
-+#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
-+#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
-+#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
-+#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
-+#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
-+#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
-+#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
-+#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
-+#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
-+#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
-+#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
-+#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
-+#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
-+#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
-+#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
-+#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
-+#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
-+#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
-+#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
-+
- #ifndef __ASSEMBLY__
- /* setup setup routines, called from board init or driver probe() */
- extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/hardware.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/hardware.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/hardware.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/hardware.h 2007-03-24 16:39:16.000000000 +0100
-@@ -22,21 +22,23 @@
- #include <asm/arch/at91sam9260.h>
- #elif defined(CONFIG_ARCH_AT91SAM9261)
- #include <asm/arch/at91sam9261.h>
-+#elif defined(CONFIG_ARCH_AT91SAM9263)
-+#include <asm/arch/at91sam9263.h>
- #else
- #error "Unsupported AT91 processor"
- #endif
-
-
- /*
-- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
-- * to 0xFEFA0000 .. 0xFF000000. (384Kb)
-+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
-+ * to 0xFEF78000 .. 0xFF000000. (544Kb)
- */
--#define AT91_IO_PHYS_BASE 0xFFFA0000
-+#define AT91_IO_PHYS_BASE 0xFFF78000
- #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
- #define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
-
- /* Convert a physical IO address to virtual IO address */
--#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-+#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
- /*
- * Virtual to Physical Address mapping for IO devices.
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/ics1523.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/ics1523.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/ics1523.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/ics1523.h 2007-03-24 16:39:16.000000000 +0100
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//* ATMEL Microcontroller Software Support - ROUSSET -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name : ics1523.h
-+//* Object : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED : Creation
-+//* 1.2 13/01/03 FB : Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
-+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
-+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
-+
-+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
-+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS1523_ACCESS_OK 0 /* OK */
-+#define ICS1523_ACCESS_ERROR -1 /* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_ADDR 0x26 /* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition */
-+/*--------------------------------------------------*/
-+
-+#define ICS_ICR 0x0 /* Input Control Register */
-+#define ICS_LCR 0x1 /* Loop Control Register */
-+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
-+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
-+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
-+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
-+#define ICS_OE 0x6 /* Output Enables Register */
-+#define ICS_OD 0x7 /* Osc Divider Register */
-+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
-+#define ICS_VID 0x10 /* Chip Version Register */
-+#define ICS_RID 0x11 /* Chip Revision Register */
-+#define ICS_SR 0x12 /* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition */
-+/*------------------------------------------------------*/
-+
-+#define ICS_PDEN 0x1 /* Phase Detector Enable */
-+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
-+#define ICS_REFPOL 0x4 /* External Reference Polarity */
-+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
-+#define ICS_FBKSEL 0x10 /* External Feedback Select */
-+#define ICS_FUNCSEL 0x20 /* Function Out Select */
-+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
-+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition */
-+/*-----------------------------------------------------*/
-+
-+#define ICS_PFD 0x7 /* Phase Detector Gain */
-+#define ICS_PSD 0x30 /* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
-+/*------------------------------------------------------------*/
-+
-+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
-+#define ICS_FILSEL 0x80 /* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
-+/*----------------------------------------------------------------*/
-+
-+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
-+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition */
-+/*-------------------------------------------------------*/
-+
-+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
-+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
-+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
-+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
-+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
-+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
-+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
-+#define ICS_INSEL 0x80 /* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition */
-+/*---------------------------------------------------*/
-+
-+#define ICS_DPAR 0x0A /* DPA Reset Command */
-+#define ICS_PLLR 0x50 /* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition */
-+/*------------------------------------------------*/
-+
-+#define ICS_CHIPV 0xFF /* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition */
-+/*-------------------------------------------------*/
-+
-+#define ICS_CHIPR 0xFF /* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition */
-+/*------------------------------------------*/
-+
-+#define ICS_DPALOCK 0x1 /* DPA Lock Status */
-+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/irqs.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/irqs.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/irqs.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/irqs.h 2007-03-24 16:39:16.000000000 +0100
-@@ -37,8 +37,8 @@
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
-- * We make provision for 4 banks of GPIO.
-+ * We make provision for 5 banks of GPIO.
- */
--#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
-+#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
-
- #endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/spi.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/spi.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/spi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/spi.h 2007-03-24 16:39:16.000000000 +0100
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR 153 /* registered device number */
-+
-+#define DEFAULT_SPI_CLK 6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ * DataFlash uses maximum of 2
-+ * spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS 8
-+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
-+ int txlen[MAX_SPI_TRANSFERS];
-+ void* rx[MAX_SPI_TRANSFERS]; /* receive */
-+ int rxlen[MAX_SPI_TRANSFERS];
-+ int nr_transfers; /* number of transfers */
-+ int curr; /* current transfer */
-+};
-+
-+struct spi_local {
-+ unsigned int pcs; /* Peripheral Chip Select value */
-+
-+ struct spi_transfer_list *xfers; /* current transfer list */
-+ dma_addr_t tx, rx; /* DMA address for current transfer */
-+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
-diff -urN linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/timex.h linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/timex.h
---- linux-2.6.20.4-0rig/include/asm-arm/arch-at91rm9200/timex.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-arm/arch-at91rm9200/timex.h 2007-03-24 16:39:16.000000000 +0100
-@@ -32,6 +32,11 @@
- #define AT91SAM9_MASTER_CLOCK 99300000
- #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-+#elif defined(CONFIG_ARCH_AT91SAM9263)
-+
-+#define AT91SAM9_MASTER_CLOCK 99959500
-+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-+
- #endif
-
- #endif
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at32ap7000.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at32ap7000.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at32ap7000.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at32ap7000.h 2007-03-24 16:42:28.000000000 +0100
-@@ -24,10 +24,12 @@
- #define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
- #define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
- #define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
-+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
-
- #define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
- #define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
- #define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
- #define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
-+#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
-
- #endif /* __ASM_ARCH_AT32AP7000_H__ */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at91_pdc.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at91_pdc.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/at91_pdc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/at91_pdc.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,36 +0,0 @@
--/*
-- * include/asm-arm/arch-at91rm9200/at91_pdc.h
-- *
-- * Copyright (C) 2005 Ivan Kokshaysky
-- * Copyright (C) SAN People
-- *
-- * Peripheral Data Controller (PDC) registers.
-- * Based on AT91RM9200 datasheet revision E.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--
--#ifndef AT91_PDC_H
--#define AT91_PDC_H
--
--#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
--#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
--#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
--#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
--#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
--#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
--#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
--#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
--
--#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
--#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
--#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
--#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
--#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
--
--#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
--
--#endif
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/board.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/board.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/board.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/board.h 2007-03-24 16:42:29.000000000 +0100
-@@ -6,6 +6,8 @@
-
- #include <linux/types.h>
-
-+#define GPIO_PIN_NONE (-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
-
-@@ -26,7 +28,19 @@
- struct platform_device *
- at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
-
--struct platform_device *at32_add_device_spi(unsigned int id);
-+struct spi_board_info;
-+struct platform_device *
-+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-+
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+struct platform_device *at32_add_device_usba(unsigned int id);
-
- struct lcdc_platform_data {
- unsigned long fbmem_start;
-@@ -35,4 +49,8 @@
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
-
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+struct platform_device *at32_add_device_isi(unsigned int id);
-+
- #endif /* __ASM_ARCH_BOARD_H */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/gpio.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/gpio.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/gpio.h 2007-03-24 16:42:28.000000000 +0100
-@@ -0,0 +1,27 @@
-+#ifndef __ASM_AVR32_ARCH_GPIO_H
-+#define __ASM_AVR32_ARCH_GPIO_H
-+
-+#include <linux/compiler.h>
-+#include <asm/irq.h>
-+
-+
-+/* Arch-neutral GPIO API */
-+int __must_check gpio_request(unsigned int gpio, const char *label);
-+void gpio_free(unsigned int gpio);
-+
-+int gpio_direction_input(unsigned int gpio);
-+int gpio_direction_output(unsigned int gpio);
-+int gpio_get_value(unsigned int gpio);
-+void gpio_set_value(unsigned int gpio, int value);
-+
-+static inline int gpio_to_irq(unsigned int gpio)
-+{
-+ return gpio + GPIO_IRQ_BASE;
-+}
-+
-+static inline int irq_to_gpio(unsigned int irq)
-+{
-+ return irq - GPIO_IRQ_BASE;
-+}
-+
-+#endif /* __ASM_AVR32_ARCH_GPIO_H */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/irq.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/irq.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/irq.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/irq.h 2007-03-24 16:42:28.000000000 +0100
-@@ -0,0 +1,14 @@
-+#ifndef __ASM_AVR32_ARCH_IRQ_H
-+#define __ASM_AVR32_ARCH_IRQ_H
-+
-+#define EIM_IRQ_BASE NR_INTERNAL_IRQS
-+#define NR_EIM_IRQS 32
-+
-+#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
-+
-+#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
-+#define NR_GPIO_IRQS (5 * 32)
-+
-+#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
-+
-+#endif /* __ASM_AVR32_ARCH_IRQ_H */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/portmux.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/portmux.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/portmux.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/portmux.h 2007-03-24 16:42:28.000000000 +0100
-@@ -15,12 +15,14 @@
- *
- * The following flags determine the initial state of the pin.
- */
--#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */
--#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */
--#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */
-+#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */
-+#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
-+#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
-+#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
-
- void at32_select_periph(unsigned int pin, unsigned int periph,
- unsigned long flags);
- void at32_select_gpio(unsigned int pin, unsigned long flags);
-+void at32_reserve_pin(unsigned int pin);
-
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/smc.h linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/smc.h
---- linux-2.6.20.4-0rig/include/asm-avr32/arch-at32ap/smc.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/arch-at32ap/smc.h 2007-03-24 16:42:29.000000000 +0100
-@@ -48,10 +48,32 @@
- unsigned int nwe_controlled:1;
-
- /*
-+ * 0: NWAIT is disabled
-+ * 1: Reserved
-+ * 2: NWAIT is frozen mode
-+ * 3: NWAIT in ready mode
-+ */
-+ unsigned int nwait_mode:2;
-+
-+ /*
- * 0: Byte select access type
- * 1: Byte write access type
- */
- unsigned int byte_write:1;
-+
-+ /*
-+ * Number of clock cycles before data is released after
-+ * the rising edge of the read controlling signal
-+ *
-+ * Total cycles from SMC is tdf_cycles + 1
-+ */
-+ unsigned int tdf_cycles:4;
-+
-+ /*
-+ * 0: TDF optimization disabled
-+ * 1: TDF optimization enabled
-+ */
-+ unsigned int tdf_mode:1;
- };
-
- extern int smc_set_configuration(int cs, const struct smc_config *config);
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/checksum.h linux-2.6.20.4-atmel/include/asm-avr32/checksum.h
---- linux-2.6.20.4-0rig/include/asm-avr32/checksum.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/checksum.h 2007-03-24 16:42:28.000000000 +0100
-@@ -38,7 +38,7 @@
- * passed in an incorrect kernel address to one of these functions.
- *
- * If you use these functions directly please don't forget the
-- * verify_area().
-+ * access_ok().
- */
- static inline
- __wsum csum_partial_copy_nocheck(const void *src, void *dst,
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/dma-controller.h linux-2.6.20.4-atmel/include/asm-avr32/dma-controller.h
---- linux-2.6.20.4-0rig/include/asm-avr32/dma-controller.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/dma-controller.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
-+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
-+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
-+
-+ unsigned short channel;
-+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
-+
-+struct dma_request_sg {
-+ struct dma_request req;
-+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
-+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
-+
-+struct dma_request_cyclic {
-+ struct dma_request req;
-+
-+ int periods;
-+ unsigned long buffer_size;
-+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
-+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
-+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
-+
-+struct dma_request_memcpy {
-+ struct dma_request req;
-+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
-+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
-+
-+ size_t length;
-+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
-+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
-+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
-+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
-+}
-+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+ dmac->release_channel(dmac, chan);
-+}
-+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
-+{
-+ return dmac->prepare_request_sg(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ return dmac->prepare_request_cyclic(dmac, req);
-+}
-+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
-+{
-+ return dmac->prepare_request_memcpy(dmac, req);
-+}
-+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->start_request(dmac, channel);
-+}
-+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->stop_request(dmac, channel);
-+}
-+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->get_current_pos(dmac, channel);
-+}
-+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
-+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/dma-mapping.h linux-2.6.20.4-atmel/include/asm-avr32/dma-mapping.h
---- linux-2.6.20.4-0rig/include/asm-avr32/dma-mapping.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/dma-mapping.h 2007-03-24 16:42:28.000000000 +0100
-@@ -32,6 +32,14 @@
- return 0;
- }
-
-+/*
-+ * dma_map_single can't fail as it is implemented now.
-+ */
-+static inline int dma_mapping_error(dma_addr_t addr)
-+{
-+ return 0;
-+}
-+
- /**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/gpio.h linux-2.6.20.4-atmel/include/asm-avr32/gpio.h
---- linux-2.6.20.4-0rig/include/asm-avr32/gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/gpio.h 2007-03-24 16:42:28.000000000 +0100
-@@ -0,0 +1,6 @@
-+#ifndef __ASM_AVR32_GPIO_H
-+#define __ASM_AVR32_GPIO_H
-+
-+#include <asm/arch/gpio.h>
-+
-+#endif /* __ASM_AVR32_GPIO_H */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/ide.h linux-2.6.20.4-atmel/include/asm-avr32/ide.h
---- linux-2.6.20.4-0rig/include/asm-avr32/ide.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/ide.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,36 @@
-+/*
-+ * linux/include/asm-arm/ide.h
-+ *
-+ * Copyright (C) 1994-1996 Linus Torvalds & authors
-+ */
-+
-+/*
-+ * This file contains the ARM architecture specific IDE code.
-+ */
-+
-+#ifndef __ASMAVR32_IDE_H
-+#define __ASMAVR32_IDE_H
-+
-+#ifdef __KERNEL__
-+
-+#ifndef MAX_HWIFS
-+#define MAX_HWIFS 4
-+#endif
-+
-+#if !defined(CONFIG_ARCH_L7200)
-+# define IDE_ARCH_OBSOLETE_INIT
-+# ifdef CONFIG_ARCH_CLPS7500
-+# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-+# else
-+# define ide_default_io_ctl(base) (0)
-+# endif
-+#endif /* !ARCH_L7200 */
-+
-+#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
-+#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
-+#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
-+#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len)
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /* __ASMAVR32_IDE_H */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/io.h linux-2.6.20.4-atmel/include/asm-avr32/io.h
---- linux-2.6.20.4-0rig/include/asm-avr32/io.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/io.h 2007-03-24 16:42:29.000000000 +0100
-@@ -5,6 +5,8 @@
-
- #ifdef __KERNEL__
-
-+#include <linux/types.h>
-+
- #include <asm/addrspace.h>
- #include <asm/byteorder.h>
-
-@@ -28,45 +30,72 @@
- * Generic IO read/write. These perform native-endian accesses. Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
--extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
--extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
--extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
-+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-+
-+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-+
-+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
-+{
-+ *(volatile u8 __force *)addr = v;
-+}
-+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
-+{
-+ *(volatile u16 __force *)addr = v;
-+}
-+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
-+{
-+ *(volatile u32 __force *)addr = v;
-+}
-+
-+static inline u8 __raw_readb(const volatile void __iomem *addr)
-+{
-+ return *(const volatile u8 __force *)addr;
-+}
-+static inline u16 __raw_readw(const volatile void __iomem *addr)
-+{
-+ return *(const volatile u16 __force *)addr;
-+}
-+static inline u32 __raw_readl(const volatile void __iomem *addr)
-+{
-+ return *(const volatile u32 __force *)addr;
-+}
-
--extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
--extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
--extern void __raw_readsl(unsigned int addr, void *data, int longlen);
-+#define __swizzle_addr_b(addr) \
-+ ((typeof(addr))((unsigned long)(addr) ^ 3UL))
-+#define __swizzle_addr_w(addr) \
-+ ((typeof(addr))((unsigned long)(addr) ^ 2UL))
-+#define __swizzle_addr_l(addr) \
-+ (addr)
-
--static inline void writeb(unsigned char b, volatile void __iomem *addr)
-+static inline void writeb(u8 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned char __force *)addr = b;
-+ __raw_writeb(v, __swizzle_addr_b(addr));
- }
--static inline void writew(unsigned short b, volatile void __iomem *addr)
-+static inline void writew(u16 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned short __force *)addr = b;
-+ __raw_writew(v, __swizzle_addr_w(addr));
- }
--static inline void writel(unsigned int b, volatile void __iomem *addr)
-+static inline void writel(u32 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned int __force *)addr = b;
-+ __raw_writel(v, __swizzle_addr_l(addr));
- }
--#define __raw_writeb writeb
--#define __raw_writew writew
--#define __raw_writel writel
-
--static inline unsigned char readb(const volatile void __iomem *addr)
-+static inline u8 readb(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned char __force *)addr;
-+ return __raw_readb(__swizzle_addr_b(addr));
- }
--static inline unsigned short readw(const volatile void __iomem *addr)
-+static inline u16 readw(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned short __force *)addr;
-+ return __raw_readw(__swizzle_addr_w(addr));
- }
--static inline unsigned int readl(const volatile void __iomem *addr)
-+static inline u32 readl(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned int __force *)addr;
-+ return __raw_readl(__swizzle_addr_l(addr));
- }
--#define __raw_readb readb
--#define __raw_readw readw
--#define __raw_readl readl
-
- #define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
- #define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
-@@ -108,17 +137,13 @@
-
- #endif
-
--
--/*
-- * These two are only here because ALSA _thinks_ it needs them...
-- */
- static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
- unsigned long count)
- {
- char *p = to;
- while (count) {
- count--;
-- *p = readb(from);
-+ *p = __raw_readb(from);
- p++;
- from++;
- }
-@@ -130,7 +155,7 @@
- const char *p = from;
- while (count) {
- count--;
-- writeb(*p, to);
-+ __raw_writeb(*p, to);
- p++;
- to++;
- }
-@@ -252,6 +277,9 @@
- #define ioremap(offset, size) \
- __ioremap((offset), (size), 0)
-
-+#define ioremap_nocache(offset, size) \
-+ __ioremap((offset), (size), 0)
-+
- #define iounmap(addr) \
- __iounmap(addr)
-
-@@ -263,6 +291,14 @@
- #define page_to_bus page_to_phys
- #define bus_to_page phys_to_page
-
-+/*
-+ * Create a virtual mapping cookie for an IO port range. There exists
-+ * no such thing as port-based I/O on AVR32, so a regular ioremap()
-+ * should do what we need.
-+ */
-+#define ioport_map(port, nr) ioremap(port, nr)
-+#define ioport_unmap(port) iounmap(port)
-+
- #define dma_cache_wback_inv(_start, _size) \
- flush_dcache_region(_start, _size)
- #define dma_cache_inv(_start, _size) \
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/irq.h linux-2.6.20.4-atmel/include/asm-avr32/irq.h
---- linux-2.6.20.4-0rig/include/asm-avr32/irq.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/irq.h 2007-03-24 16:42:28.000000000 +0100
-@@ -2,8 +2,12 @@
- #define __ASM_AVR32_IRQ_H
-
- #define NR_INTERNAL_IRQS 64
--#define NR_EXTERNAL_IRQS 64
--#define NR_IRQS (NR_INTERNAL_IRQS + NR_EXTERNAL_IRQS)
-+
-+#include <asm/arch/irq.h>
-+
-+#ifndef NR_IRQS
-+#define NR_IRQS (NR_INTERNAL_IRQS)
-+#endif
-
- #define irq_canonicalize(i) (i)
-
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/Kbuild linux-2.6.20.4-atmel/include/asm-avr32/Kbuild
---- linux-2.6.20.4-0rig/include/asm-avr32/Kbuild 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/Kbuild 2007-03-24 16:42:28.000000000 +0100
-@@ -1,3 +1,3 @@
- include include/asm-generic/Kbuild.asm
-
--headers-y += cachectl.h
-+header-y += cachectl.h
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/periph/lcdc.h linux-2.6.20.4-atmel/include/asm-avr32/periph/lcdc.h
---- linux-2.6.20.4-0rig/include/asm-avr32/periph/lcdc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/periph/lcdc.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,271 @@
-+/*
-+ * Register definitions for Atmel/SIDSA LCD Controller
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_PERIPH_LCDC_H__
-+#define __ASM_AVR32_PERIPH_LCDC_H__
-+
-+#define LCDC_CONTRAST_CTR 0x00000840
-+# define LCDC_CONTRAST_CTR_ENA_OFFSET 3
-+# define LCDC_CONTRAST_CTR_ENA_SIZE 1
-+# define LCDC_CONTRAST_CTR_POL_OFFSET 2
-+# define LCDC_CONTRAST_CTR_POL_SIZE 1
-+# define LCDC_CONTRAST_CTR_PS_OFFSET 0
-+# define LCDC_CONTRAST_CTR_PS_SIZE 2
-+#define LCDC_CONTRAST_VAL 0x00000844
-+# define LCDC_CONTRAST_VAL_CVAL_OFFSET 0
-+# define LCDC_CONTRAST_VAL_CVAL_SIZE 8
-+#define LCDC_DMABADDR1 0x00000000
-+# define LCDC_DMABADDR1_BADDR_U_OFFSET 0
-+# define LCDC_DMABADDR1_BADDR_U_SIZE 32
-+#define LCDC_DMABADDR2 0x00000004
-+# define LCDC_DMABADDR2_BADDR_L_OFFSET 0
-+# define LCDC_DMABADDR2_BADDR_L_SIZE 32
-+#define LCDC_DMACON 0x0000001C
-+# define LCDC_DMACON_DMABUSY_OFFSET 2
-+# define LCDC_DMACON_DMABUSY_SIZE 1
-+# define LCDC_DMACON_DMAEN_OFFSET 0
-+# define LCDC_DMACON_DMAEN_SIZE 1
-+# define LCDC_DMACON_DMARST_OFFSET 1
-+# define LCDC_DMACON_DMARST_SIZE 1
-+# define LCDC_DMACON_DMAUPDT_OFFSET 3
-+# define LCDC_DMACON_DMAUPDT_SIZE 1
-+# define LCDC_DMACON_DMA2DEN_OFFSET 4
-+# define LCDC_DMACON_DMA2DEN_SIZE 1
-+#define LCDC_DMAFRMADD1 0x00000010
-+# define LCDC_DMAFRMADD1_FRMADD_U_OFFSET 0
-+# define LCDC_DMAFRMADD1_FRMADD_U_SIZE 32
-+#define LCDC_DMAFRMADD2 0x00000014
-+# define LCDC_DMAFRMADD2_FRMADD_L_OFFSET 0
-+# define LCDC_DMAFRMADD2_FRMADD_L_SIZE 32
-+#define LCDC_DMAFRMCFG 0x00000018
-+# define LCDC_DMAFRMCFG_BRSTLEN_OFFSET 24
-+# define LCDC_DMAFRMCFG_BRSTLEN_SIZE 7
-+# define LCDC_DMAFRMCFG_FRMSIZE_OFFSET 0
-+# define LCDC_DMAFRMCFG_FRMSIZE_SIZE 23
-+#define LCDC_DMAFRMPT1 0x00000008
-+# define LCDC_DMAFRMPT1_FRMPT_U_OFFSET 0
-+# define LCDC_DMAFRMPT1_FRMPT_U_SIZE 23
-+#define LCDC_DMAFRMPT2 0x0000000C
-+# define LCDC_DMAFRMPT2_FRMPT_L_OFFSET 0
-+# define LCDC_DMAFRMPT2_FRMPT_L_SIZE 23
-+#define LCDC_DMA2DCFG 0x00000020
-+# define LCDC_DMA2DCFG_ADDRINC_OFFSET 0
-+# define LCDC_DMA2DCFG_ADDRINC_SIZE 16
-+# define LCDC_DMA2DCFG_PIXELOFF_OFFSET 24
-+# define LCDC_DMA2DCFG_PIXELOFF_SIZE 5
-+#define LCDC_DP1_2 0x0000081C
-+# define LCDC_DP1_2_DP1_2_OFFSET 0
-+# define LCDC_DP1_2_DP1_2_SIZE 8
-+#define LCDC_DP2_3 0x00000828
-+# define LCDC_DP2_3_DP2_3_OFFSET 0
-+# define LCDC_DP2_3_DP2_3_SIZE 12
-+#define LCDC_DP3_4 0x00000830
-+# define LCDC_DP3_4_DP3_4_OFFSET 0
-+# define LCDC_DP3_4_DP3_4_SIZE 16
-+#define LCDC_DP3_5 0x00000824
-+# define LCDC_DP3_5_DP3_5_OFFSET 0
-+# define LCDC_DP3_5_DP3_5_SIZE 20
-+#define LCDC_DP4_5 0x00000834
-+# define LCDC_DP4_5_DP4_5_OFFSET 0
-+# define LCDC_DP4_5_DP4_5_SIZE 20
-+#define LCDC_DP4_7 0x00000820
-+# define LCDC_DP4_7_DP4_7_OFFSET 0
-+# define LCDC_DP4_7_DP4_7_SIZE 28
-+#define LCDC_DP5_7 0x0000082C
-+# define LCDC_DP5_7_DP5_7_OFFSET 0
-+# define LCDC_DP5_7_DP5_7_SIZE 28
-+#define LCDC_DP6_7 0x00000838
-+# define LCDC_DP6_7_DP6_7_OFFSET 0
-+# define LCDC_DP6_7_DP6_7_SIZE 28
-+#define LCDC_LCDCON1 0x00000800
-+# define LCDC_LCDCON1_BYPASS_OFFSET 0
-+# define LCDC_LCDCON1_BYPASS_SIZE 1
-+# define LCDC_LCDCON1_CLKVAL_OFFSET 12
-+# define LCDC_LCDCON1_CLKVAL_SIZE 9
-+# define LCDC_LCDCON1_LINECNT_OFFSET 21
-+# define LCDC_LCDCON1_LINECNT_SIZE 11
-+#define LCDC_LCDCON2 0x00000804
-+# define LCDC_LCDCON2_CLKMOD_OFFSET 15
-+# define LCDC_LCDCON2_CLKMOD_SIZE 1
-+# define LCDC_LCDCON2_DISTYPE_OFFSET 0
-+# define LCDC_LCDCON2_DISTYPE_SIZE 2
-+# define LCDC_LCDCON2_IFWIDTH_OFFSET 3
-+# define LCDC_LCDCON2_IFWIDTH_SIZE 2
-+# define LCDC_LCDCON2_INVCLK_OFFSET 11
-+# define LCDC_LCDCON2_INVCLK_SIZE 1
-+# define LCDC_LCDCON2_INVDVAL_OFFSET 12
-+# define LCDC_LCDCON2_INVDVAL_SIZE 1
-+# define LCDC_LCDCON2_INVFRAME_OFFSET 9
-+# define LCDC_LCDCON2_INVFRAME_SIZE 1
-+# define LCDC_LCDCON2_INVLINE_OFFSET 10
-+# define LCDC_LCDCON2_INVLINE_SIZE 1
-+# define LCDC_LCDCON2_INVVD_OFFSET 8
-+# define LCDC_LCDCON2_INVVD_SIZE 1
-+# define LCDC_LCDCON2_MEMOR_OFFSET 30
-+# define LCDC_LCDCON2_MEMOR_SIZE 2
-+# define LCDC_LCDCON2_PIXELSIZE_OFFSET 5
-+# define LCDC_LCDCON2_PIXELSIZE_SIZE 3
-+# define LCDC_LCDCON2_SCANMOD_OFFSET 2
-+# define LCDC_LCDCON2_SCANMOD_SIZE 1
-+#define LCDC_LCDFIFO 0x00000814
-+# define LCDC_LCDFIFO_FIFOTH_OFFSET 0
-+# define LCDC_LCDFIFO_FIFOTH_SIZE 16
-+#define LCDC_LCDFRMCFG 0x00000810
-+# define LCDC_LCDFRMCFG_LINESIZE_OFFSET 21
-+# define LCDC_LCDFRMCFG_LINESIZE_SIZE 11
-+# define LCDC_LCDFRMCFG_LINEVAL_OFFSET 0
-+# define LCDC_LCDFRMCFG_LINEVAL_SIZE 11
-+#define LCDC_LCDMVAL 0x00000818
-+# define LCDC_LCDMVAL_MMODE_OFFSET 31
-+# define LCDC_LCDMVAL_MMODE_SIZE 1
-+# define LCDC_LCDMVAL_MVAL_OFFSET 0
-+# define LCDC_LCDMVAL_MVAL_SIZE 8
-+#define LCDC_LCDTIM1 0x00000808
-+# define LCDC_LCDTIM1_VBP_OFFSET 8
-+# define LCDC_LCDTIM1_VBP_SIZE 8
-+# define LCDC_LCDTIM1_VFP_OFFSET 0
-+# define LCDC_LCDTIM1_VFP_SIZE 8
-+# define LCDC_LCDTIM1_VHDLY_OFFSET 24
-+# define LCDC_LCDTIM1_VHDLY_SIZE 4
-+# define LCDC_LCDTIM1_VPW_OFFSET 16
-+# define LCDC_LCDTIM1_VPW_SIZE 6
-+#define LCDC_LCDTIM2 0x0000080C
-+# define LCDC_LCDTIM2_HBP_OFFSET 0
-+# define LCDC_LCDTIM2_HBP_SIZE 8
-+# define LCDC_LCDTIM2_HFP_OFFSET 21
-+# define LCDC_LCDTIM2_HFP_SIZE 11
-+# define LCDC_LCDTIM2_HPW_OFFSET 8
-+# define LCDC_LCDTIM2_HPW_SIZE 6
-+#define LCDC_LCD_GPR 0x0000085C
-+# define LCDC_LCD_GPR_GPRB0_OFFSET 0
-+# define LCDC_LCD_GPR_GPRB0_SIZE 1
-+# define LCDC_LCD_GPR_GPRB1_OFFSET 1
-+# define LCDC_LCD_GPR_GPRB1_SIZE 1
-+# define LCDC_LCD_GPR_GPRB2_OFFSET 2
-+# define LCDC_LCD_GPR_GPRB2_SIZE 1
-+# define LCDC_LCD_GPR_GPRB3_OFFSET 3
-+# define LCDC_LCD_GPR_GPRB3_SIZE 1
-+# define LCDC_LCD_GPR_GPRB4_OFFSET 4
-+# define LCDC_LCD_GPR_GPRB4_SIZE 1
-+# define LCDC_LCD_GPR_GPRB5_OFFSET 5
-+# define LCDC_LCD_GPR_GPRB5_SIZE 1
-+# define LCDC_LCD_GPR_GPRB6_OFFSET 6
-+# define LCDC_LCD_GPR_GPRB6_SIZE 1
-+# define LCDC_LCD_GPR_GPRB7_OFFSET 7
-+# define LCDC_LCD_GPR_GPRB7_SIZE 1
-+#define LCDC_LCD_ICR 0x00000858
-+# define LCDC_LCD_ICR_EOFIC_OFFSET 2
-+# define LCDC_LCD_ICR_EOFIC_SIZE 1
-+# define LCDC_LCD_ICR_LNIC_OFFSET 0
-+# define LCDC_LCD_ICR_LNIC_SIZE 1
-+# define LCDC_LCD_ICR_LSTLNIC_OFFSET 1
-+# define LCDC_LCD_ICR_LSTLNIC_SIZE 1
-+# define LCDC_LCD_ICR_MERIC_OFFSET 6
-+# define LCDC_LCD_ICR_MERIC_SIZE 1
-+# define LCDC_LCD_ICR_OWRIC_OFFSET 5
-+# define LCDC_LCD_ICR_OWRIC_SIZE 1
-+# define LCDC_LCD_ICR_UFLWIC_OFFSET 4
-+# define LCDC_LCD_ICR_UFLWIC_SIZE 1
-+#define LCDC_LCD_IDR 0x0000084C
-+# define LCDC_LCD_IDR_EOFID_OFFSET 2
-+# define LCDC_LCD_IDR_EOFID_SIZE 1
-+# define LCDC_LCD_IDR_LNID_OFFSET 0
-+# define LCDC_LCD_IDR_LNID_SIZE 1
-+# define LCDC_LCD_IDR_LSTLNID_OFFSET 1
-+# define LCDC_LCD_IDR_LSTLNID_SIZE 1
-+# define LCDC_LCD_IDR_MERID_OFFSET 6
-+# define LCDC_LCD_IDR_MERID_SIZE 1
-+# define LCDC_LCD_IDR_OWRID_OFFSET 5
-+# define LCDC_LCD_IDR_OWRID_SIZE 1
-+# define LCDC_LCD_IDR_UFLWID_OFFSET 4
-+# define LCDC_LCD_IDR_UFLWID_SIZE 1
-+#define LCDC_LCD_IER 0x00000848
-+# define LCDC_LCD_IER_EOFIE_OFFSET 2
-+# define LCDC_LCD_IER_EOFIE_SIZE 1
-+# define LCDC_LCD_IER_LNIE_OFFSET 0
-+# define LCDC_LCD_IER_LNIE_SIZE 1
-+# define LCDC_LCD_IER_LSTLNIE_OFFSET 1
-+# define LCDC_LCD_IER_LSTLNIE_SIZE 1
-+# define LCDC_LCD_IER_MERIE_OFFSET 6
-+# define LCDC_LCD_IER_MERIE_SIZE 1
-+# define LCDC_LCD_IER_OWRIE_OFFSET 5
-+# define LCDC_LCD_IER_OWRIE_SIZE 1
-+# define LCDC_LCD_IER_UFLWIE_OFFSET 4
-+# define LCDC_LCD_IER_UFLWIE_SIZE 1
-+#define LCDC_LCD_IMR 0x00000850
-+# define LCDC_LCD_IMR_EOFIM_OFFSET 2
-+# define LCDC_LCD_IMR_EOFIM_SIZE 1
-+# define LCDC_LCD_IMR_LNIM_OFFSET 0
-+# define LCDC_LCD_IMR_LNIM_SIZE 1
-+# define LCDC_LCD_IMR_LSTLNIM_OFFSET 1
-+# define LCDC_LCD_IMR_LSTLNIM_SIZE 1
-+# define LCDC_LCD_IMR_MERIM_OFFSET 6
-+# define LCDC_LCD_IMR_MERIM_SIZE 1
-+# define LCDC_LCD_IMR_OWRIM_OFFSET 5
-+# define LCDC_LCD_IMR_OWRIM_SIZE 1
-+# define LCDC_LCD_IMR_UFLWIM_OFFSET 4
-+# define LCDC_LCD_IMR_UFLWIM_SIZE 1
-+#define LCDC_LCD_IRR 0x00000864
-+# define LCDC_LCD_IRR_EOFIR_OFFSET 2
-+# define LCDC_LCD_IRR_EOFIR_SIZE 1
-+# define LCDC_LCD_IRR_LNIR_OFFSET 0
-+# define LCDC_LCD_IRR_LNIR_SIZE 1
-+# define LCDC_LCD_IRR_LSTLNIR_OFFSET 1
-+# define LCDC_LCD_IRR_LSTLNIR_SIZE 1
-+# define LCDC_LCD_IRR_MERIR_OFFSET 6
-+# define LCDC_LCD_IRR_MERIR_SIZE 1
-+# define LCDC_LCD_IRR_OWRIR_OFFSET 5
-+# define LCDC_LCD_IRR_OWRIR_SIZE 1
-+# define LCDC_LCD_IRR_UFLWIR_OFFSET 4
-+# define LCDC_LCD_IRR_UFLWIR_SIZE 1
-+#define LCDC_LCD_ISR 0x00000854
-+# define LCDC_LCD_ISR_EOFIS_OFFSET 2
-+# define LCDC_LCD_ISR_EOFIS_SIZE 1
-+# define LCDC_LCD_ISR_LNIS_OFFSET 0
-+# define LCDC_LCD_ISR_LNIS_SIZE 1
-+# define LCDC_LCD_ISR_LSTLNIS_OFFSET 1
-+# define LCDC_LCD_ISR_LSTLNIS_SIZE 1
-+# define LCDC_LCD_ISR_MERIS_OFFSET 6
-+# define LCDC_LCD_ISR_MERIS_SIZE 1
-+# define LCDC_LCD_ISR_OWRIS_OFFSET 5
-+# define LCDC_LCD_ISR_OWRIS_SIZE 1
-+# define LCDC_LCD_ISR_UFLWIS_OFFSET 4
-+# define LCDC_LCD_ISR_UFLWIS_SIZE 1
-+#define LCDC_LCD_ITR 0x00000860
-+# define LCDC_LCD_ITR_EOFIT_OFFSET 2
-+# define LCDC_LCD_ITR_EOFIT_SIZE 1
-+# define LCDC_LCD_ITR_LNIT_OFFSET 0
-+# define LCDC_LCD_ITR_LNIT_SIZE 1
-+# define LCDC_LCD_ITR_LSTLNIT_OFFSET 1
-+# define LCDC_LCD_ITR_LSTLNIT_SIZE 1
-+# define LCDC_LCD_ITR_MERIT_OFFSET 6
-+# define LCDC_LCD_ITR_MERIT_SIZE 1
-+# define LCDC_LCD_ITR_OWRIT_OFFSET 5
-+# define LCDC_LCD_ITR_OWRIT_SIZE 1
-+# define LCDC_LCD_ITR_UFLWIT_OFFSET 4
-+# define LCDC_LCD_ITR_UFLWIT_SIZE 1
-+#define LCDC_PWRCON 0x0000083C
-+# define LCDC_PWRCON_GUARD_TIME_OFFSET 1
-+# define LCDC_PWRCON_GUARD_TIME_SIZE 7
-+# define LCDC_PWRCON_LCD_BUSY_OFFSET 31
-+# define LCDC_PWRCON_LCD_BUSY_SIZE 1
-+# define LCDC_PWRCON_LCD_PWR_OFFSET 0
-+# define LCDC_PWRCON_LCD_PWR_SIZE 1
-+
-+#define LCDC_BIT(name) (1 << LCDC_##name##_OFFSET)
-+#define LCDC_MKBF(name,value) (((value) & ((1 << LCDC_##name##_SIZE) - 1)) << LCDC_##name##_OFFSET)
-+#define LCDC_GETBF(name,value) (((value) >> LCDC_##name##_OFFSET) & ((1 << LCDC_##name##_SIZE) - 1))
-+#define LCDC_INSBF(name,value,old) (((old) & ~(((1 << LCDC_##name##_SIZE) - 1) << LCDC_##name##_OFFSET)) | LCDC_MKBF(name, value))
-+
-+#define lcdc_readl(port,reg) \
-+ __raw_readl((port)->regs + LCDC_##reg)
-+#define lcdc_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + LCDC_##reg)
-+
-+#endif /* __ASM_AVR32_PERIPH_LCDC_H__ */
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/posix_types.h linux-2.6.20.4-atmel/include/asm-avr32/posix_types.h
---- linux-2.6.20.4-0rig/include/asm-avr32/posix_types.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/posix_types.h 2007-03-24 16:42:28.000000000 +0100
-@@ -23,7 +23,7 @@
- typedef unsigned int __kernel_uid_t;
- typedef unsigned int __kernel_gid_t;
- typedef unsigned long __kernel_size_t;
--typedef int __kernel_ssize_t;
-+typedef long __kernel_ssize_t;
- typedef int __kernel_ptrdiff_t;
- typedef long __kernel_time_t;
- typedef long __kernel_suseconds_t;
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/uaccess.h linux-2.6.20.4-atmel/include/asm-avr32/uaccess.h
---- linux-2.6.20.4-0rig/include/asm-avr32/uaccess.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/uaccess.h 2007-03-24 16:42:28.000000000 +0100
-@@ -68,12 +68,6 @@
-
- #define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
-
--static inline int
--verify_area(int type, const void __user *addr, unsigned long size)
--{
-- return access_ok(type, addr, size) ? 0 : -EFAULT;
--}
--
- /* Generic arbitrary sized copy. Return the number of bytes NOT copied */
- extern __kernel_size_t __copy_user(void *to, const void *from,
- __kernel_size_t n);
-diff -urN linux-2.6.20.4-0rig/include/asm-avr32/unistd.h linux-2.6.20.4-atmel/include/asm-avr32/unistd.h
---- linux-2.6.20.4-0rig/include/asm-avr32/unistd.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/asm-avr32/unistd.h 2007-03-24 16:42:28.000000000 +0100
-@@ -120,7 +120,7 @@
- #define __NR_getitimer 105
- #define __NR_swapoff 106
- #define __NR_sysinfo 107
--#define __NR_ipc 108
-+/* 108 was __NR_ipc for a little while */
- #define __NR_sendfile 109
- #define __NR_setdomainname 110
- #define __NR_uname 111
-@@ -282,8 +282,21 @@
- #define __NR_vmsplice 264
- #define __NR_epoll_pwait 265
-
-+#define __NR_msgget 266
-+#define __NR_msgsnd 267
-+#define __NR_msgrcv 268
-+#define __NR_msgctl 269
-+#define __NR_semget 270
-+#define __NR_semop 271
-+#define __NR_semctl 272
-+#define __NR_semtimedop 273
-+#define __NR_shmat 274
-+#define __NR_shmget 275
-+#define __NR_shmdt 276
-+#define __NR_shmctl 277
-+
- #ifdef __KERNEL__
--#define NR_syscalls 266
-+#define NR_syscalls 278
-
-
- #define __ARCH_WANT_IPC_PARSE_VERSION
-diff -urN linux-2.6.20.4-0rig/include/linux/atmel_pdc.h linux-2.6.20.4-atmel/include/linux/atmel_pdc.h
---- linux-2.6.20.4-0rig/include/linux/atmel_pdc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/linux/atmel_pdc.h 2007-03-24 16:39:16.000000000 +0100
-@@ -0,0 +1,36 @@
-+/*
-+ * include/linux/atmel_pdc.h
-+ *
-+ * Copyright (C) 2005 Ivan Kokshaysky
-+ * Copyright (C) SAN People
-+ *
-+ * Peripheral Data Controller (PDC) registers.
-+ * Based on AT91RM9200 datasheet revision E.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef ATMEL_PDC_H
-+#define ATMEL_PDC_H
-+
-+#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
-+#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
-+#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
-+#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
-+#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-+#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
-+#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-+#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-+
-+#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
-+#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-+#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-+#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-+#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-+
-+#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
-+
-+#endif
-diff -urN linux-2.6.20.4-0rig/include/linux/fb.h linux-2.6.20.4-atmel/include/linux/fb.h
---- linux-2.6.20.4-0rig/include/linux/fb.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/linux/fb.h 2007-03-24 16:42:29.000000000 +0100
-@@ -192,6 +192,7 @@
- /* vtotal = 144d/288n/576i => PAL */
- /* vtotal = 121d/242n/484i => NTSC */
- #define FB_SYNC_ON_GREEN 32 /* sync on green */
-+#define FB_SYNC_PCLK_RISING 64 /* pixel data sampled on rising pclk */
-
- #define FB_VMODE_NONINTERLACED 0 /* non interlaced */
- #define FB_VMODE_INTERLACED 1 /* interlaced */
-@@ -827,7 +828,7 @@
- #define fb_writeq sbus_writeq
- #define fb_memset sbus_memset_io
-
--#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
-+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
-
- #define fb_readb __raw_readb
- #define fb_readw __raw_readw
-diff -urN linux-2.6.20.4-0rig/include/linux/mtd/physmap.h linux-2.6.20.4-atmel/include/linux/mtd/physmap.h
---- linux-2.6.20.4-0rig/include/linux/mtd/physmap.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/linux/mtd/physmap.h 2007-03-24 16:42:28.000000000 +0100
-@@ -18,9 +18,10 @@
- #define __LINUX_MTD_PHYSMAP__
-
- #include <linux/mtd/mtd.h>
--#include <linux/mtd/map.h>
- #include <linux/mtd/partitions.h>
-
-+struct map_info;
-+
- struct physmap_flash_data {
- unsigned int width;
- void (*set_vpp)(struct map_info *, int);
-diff -urN linux-2.6.20.4-0rig/include/linux/spi/ads7846.h linux-2.6.20.4-atmel/include/linux/spi/ads7846.h
---- linux-2.6.20.4-0rig/include/linux/spi/ads7846.h 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/linux/spi/ads7846.h 2007-03-24 16:39:16.000000000 +0100
-@@ -5,9 +5,17 @@
- *
- * It's OK if the min/max values are zero.
- */
-+enum ads7846_filter {
-+ ADS7846_FILTER_OK,
-+ ADS7846_FILTER_REPEAT,
-+ ADS7846_FILTER_IGNORE,
-+};
-+
- struct ads7846_platform_data {
- u16 model; /* 7843, 7845, 7846. */
- u16 vref_delay_usecs; /* 0 for external vref; etc */
-+ int keep_vref_on:1; /* set to keep vref on for differential
-+ * measurements as well */
- u16 x_plate_ohms;
- u16 y_plate_ohms;
-
-@@ -21,5 +29,9 @@
- u16 debounce_rep; /* additional consecutive good readings
- * required after the first two */
- int (*get_pendown_state)(void);
-+ int (*filter_init) (struct ads7846_platform_data *pdata,
-+ void **filter_data);
-+ int (*filter) (void *filter_data, int data_idx, int *val);
-+ void (*filter_cleanup)(void *filter_data);
- };
-
-diff -urN linux-2.6.20.4-0rig/include/video/atmel_lcdc.h linux-2.6.20.4-atmel/include/video/atmel_lcdc.h
---- linux-2.6.20.4-0rig/include/video/atmel_lcdc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/include/video/atmel_lcdc.h 2007-03-24 16:39:16.000000000 +0100
-@@ -0,0 +1,193 @@
-+/*
-+ * include/video/atmel_lcdc.h
-+ *
-+ * Header file for AT91/AT32 LCD Controller
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_LCDC_H__
-+#define __ATMEL_LCDC_H__
-+
-+ /* LCD Controller info data structure */
-+struct atmel_lcdfb_info {
-+ spinlock_t lock;
-+ struct fb_info *info;
-+ void __iomem *mmio;
-+ unsigned long irq_base;
-+ dma_addr_t map_dma;
-+ void *map_cpu;
-+ size_t map_size;
-+
-+ unsigned int guard_time;
-+ struct platform_device *pdev;
-+ struct clk *bus_clk;
-+ struct clk *lcdc_clk;
-+ unsigned int default_bpp;
-+ unsigned int default_lcdcon2;
-+ unsigned int default_dmacon;
-+ int default_flags;
-+ u8 power_control_pin;
-+ struct fb_monspecs *default_monspecs;
-+};
-+
-+#define ATMEL_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
-+#define ATMEL_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
-+#define ATMEL_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
-+#define ATMEL_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
-+#define ATMEL_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
-+#define ATMEL_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
-+
-+#define ATMEL_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
-+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
-+#define ATMEL_LCDC_BLENGTH_OFFSET 24 /* Burst Length */
-+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
-+
-+#define ATMEL_LCDC_DMACON 0x1c /* DMA Control Register */
-+#define ATMEL_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
-+#define ATMEL_LCDC_DMARST (0x1 << 1) /* DMA Reset */
-+#define ATMEL_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
-+
-+#define ATMEL_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
-+#define ATMEL_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
-+#define ATMEL_LCDC_CLKVAL_OFFSET 12 /* Clock Divider */
-+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
-+#define ATMEL_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
-+
-+#define ATMEL_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
-+#define ATMEL_LCDC_DISTYPE (3 << 0) /* Display Type */
-+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
-+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
-+#define ATMEL_LCDC_SCANMOD (1 << 2) /* Scan Mode */
-+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
-+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
-+#define ATMEL_LCDC_IFWIDTH (3 << 3) /*Interface Width */
-+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
-+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
-+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
-+#define ATMEL_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
-+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
-+#define ATMEL_LCDC_INVVD (1 << 8) /* LCD Data polarity */
-+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
-+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
-+#define ATMEL_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
-+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
-+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
-+#define ATMEL_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
-+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
-+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
-+#define ATMEL_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
-+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
-+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
-+#define ATMEL_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
-+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
-+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
-+#define ATMEL_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
-+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-+#define ATMEL_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
-+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
-+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
-+
-+#define ATMEL_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
-+#define ATMEL_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
-+#define ATMEL_LCDC_VBP_OFFSET 8 /* Vertical Back Porch */
-+#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
-+#define ATMEL_LCDC_VPW_OFFSET 16 /* Vertical Synchronization Pulse Width */
-+#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define ATMEL_LCDC_VHDLY_OFFSET 24 /* Vertical to Horizontal Delay */
-+#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
-+
-+#define ATMEL_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
-+#define ATMEL_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
-+#define ATMEL_LCDC_HPW_OFFSET 8 /* Horizontal Synchronization Pulse Width */
-+#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
-+#define ATMEL_LCDC_HFP_OFFSET 21 /* Horizontal Front Porch */
-+#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+
-+#define ATMEL_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
-+#define ATMEL_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
-+#define ATMEL_LCDC_HOZVAL_OFFSET 21 /* Horizontal Size of LCD Module */
-+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
-+
-+#define ATMEL_LCDC_FIFO 0x0814 /* LCD FIFO Register */
-+#define ATMEL_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
-+
-+#define ATMEL_LCDC_MVAL 0x0818 /* LCD Mode Toggle Rate Value Register */
-+
-+#define ATMEL_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
-+#define ATMEL_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
-+#define ATMEL_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
-+#define ATMEL_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
-+#define ATMEL_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
-+#define ATMEL_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
-+#define ATMEL_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
-+#define ATMEL_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
-+#define ATMEL_LCDC_DP1_2_VAL (0xff)
-+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
-+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
-+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
-+
-+#define ATMEL_LCDC_PWRCON 0x083c /* Power Control Register */
-+#define ATMEL_LCDC_PWR (1 << 0) /* LCD Module Power Control */
-+#define ATMEL_LCDC_GUARDT_OFFSET 1 /* Delay in Frame Period */
-+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
-+#define ATMEL_LCDC_BUSY (1 << 31) /* LCD Busy */
-+
-+#define ATMEL_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
-+#define ATMEL_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
-+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
-+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
-+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
-+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
-+#define ATMEL_LCDC_POL (1 << 2) /* Polarity of output Pulse */
-+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
-+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
-+#define ATMEL_LCDC_ENA (1 << 3) /* PWM generator Control */
-+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
-+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
-+
-+#define ATMEL_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
-+#define ATMEL_LCDC_CVAL (0xff) /* PWM compare value */
-+
-+#define ATMEL_LCDC_IER 0x0848 /* Interrupt Enable Register */
-+#define ATMEL_LCDC_IDR 0x084c /* Interrupt Disable Register */
-+#define ATMEL_LCDC_IMR 0x0850 /* Interrupt Mask Register */
-+#define ATMEL_LCDC_ISR 0x0854 /* Interrupt Status Register */
-+#define ATMEL_LCDC_ICR 0x0858 /* Interrupt Clear Register */
-+#define ATMEL_LCDC_LNI (1 << 0) /* Line Interrupt */
-+#define ATMEL_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
-+#define ATMEL_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
-+#define ATMEL_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
-+#define ATMEL_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
-+#define ATMEL_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
-+
-+#define ATMEL_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
-+
-+#endif /* __ATMEL_LCDC_H__ */
-diff -urN linux-2.6.20.4-0rig/MAINTAINERS linux-2.6.20.4-atmel/MAINTAINERS
---- linux-2.6.20.4-0rig/MAINTAINERS 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/MAINTAINERS 2007-03-24 16:43:49.000000000 +0100
-@@ -602,6 +602,11 @@
- M: hskinnemoen@atmel.com
- S: Supported
-
-+ATMEL SPI DRIVER
-+P: Haavard Skinnemoen
-+M: hskinnemoen@atmel.com
-+S: Supported
-+
- ATMEL WIRELESS DRIVER
- P: Simon Kelley
- M: simon@thekelleys.org.uk
-diff -urN linux-2.6.20.4-0rig/scripts/checkstack.pl linux-2.6.20.4-atmel/scripts/checkstack.pl
---- linux-2.6.20.4-0rig/scripts/checkstack.pl 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/scripts/checkstack.pl 2007-03-24 16:42:29.000000000 +0100
-@@ -12,6 +12,7 @@
- # sh64 port by Paul Mundt
- # Random bits by Matt Mackall <mpm@selenic.com>
- # M68k port by Geert Uytterhoeven and Andreas Schwab
-+# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- # Usage:
- # objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@
- if ($arch eq 'arm') {
- #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
- $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+ } elsif ($arch eq 'avr32') {
-+ #8000008a: 20 1d sub sp,4
-+ #80000ca8: fa cd 05 b0 sub sp,sp,1456
-+ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- } elsif ($arch =~ /^i[3456]86$/) {
- #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
- $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
-diff -urN linux-2.6.20.4-0rig/sound/avr32/ac97c.c linux-2.6.20.4-atmel/sound/avr32/ac97c.c
---- linux-2.6.20.4-0rig/sound/avr32/ac97c.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/avr32/ac97c.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,1250 @@
-+/*
-+ * Driver for the Atmel AC97 Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#ifndef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+#include <sound/memalloc.h>
-+#endif
-+
-+#include <asm/io.h>
-+
-+#include "ac97c.h"
-+
-+static DEFINE_MUTEX(opened_mutex);
-+
-+/* module parameters */
-+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
-+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
-+
-+module_param_array(index, int, NULL, 0444);
-+MODULE_PARM_DESC(index, "Index value for AC97 controller");
-+module_param_array(id, charp, NULL, 0444);
-+MODULE_PARM_DESC(id, "ID string for AC97 controller");
-+module_param_array(enable, bool, NULL, 0444);
-+MODULE_PARM_DESC(enable, "Enable AC97 controller");
-+
-+#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+#include <asm/dma-controller.h>
-+
-+struct atmel_ac97_dma_info {
-+ struct dma_request_cyclic req_tx;
-+ struct dma_request_cyclic req_rx;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
-+#endif
-+
-+
-+typedef struct atmel_ac97 {
-+ spinlock_t lock;
-+ void __iomem *regs;
-+ int period;
-+
-+ snd_pcm_substream_t *playback_substream;
-+ snd_pcm_substream_t *capture_substream;
-+ snd_card_t *card;
-+ snd_pcm_t *pcm;
-+ ac97_t *ac97;
-+ ac97_bus_t *ac97_bus;
-+ int irq;
-+ int opened;
-+ u64 cur_format;
-+ unsigned int cur_rate;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+ struct atmel_ac97_dma_info dma;
-+} atmel_ac97_t;
-+#define get_chip(card) ((atmel_ac97_t *)(card)->private_data)
-+
-+#define ac97c_writel(chip, reg, val) \
-+ __raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg) \
-+ __raw_readl((chip)->regs + AC97C_##reg)
-+
-+/* PCM part */
-+
-+static snd_pcm_hardware_t snd_atmel_ac97_playback_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ |SNDRV_PCM_INFO_MMAP
-+ |SNDRV_PCM_INFO_MMAP_VALID
-+ |SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ |SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 6,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ .period_bytes_max = 64*1024,
-+#else
-+ .period_bytes_max = 4095,
-+#endif
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+static snd_pcm_hardware_t snd_atmel_ac97_capture_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ |SNDRV_PCM_INFO_MMAP
-+ |SNDRV_PCM_INFO_MMAP_VALID
-+ |SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ |SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE|SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ .period_bytes_max = 64*1024,
-+#else
-+ .period_bytes_max = 4095,
-+#endif
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
-+
-+/* Joint full duplex variables */
-+unsigned int hw_rates[1];
-+unsigned int hw_formats[1];
-+struct snd_pcm_hw_constraint_list hw_constraint_rates;
-+struct snd_pcm_hw_constraint_list hw_constraint_formats;
-+
-+/*
-+ * PCM functions
-+ */
-+static int
-+snd_atmel_ac97_playback_open(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_playback_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL<<chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->playback_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int
-+snd_atmel_ac97_capture_open(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_capture_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL<<chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->capture_substream = substream;
-+ chip->period = 0;
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_close(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_close(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_hw_params(snd_pcm_substream_t *substream,
-+ snd_pcm_hw_params_t *hw_params)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+ int err;
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return err;
-+#else
-+ int pg;
-+ size_t size = params_buffer_bytes(hw_params);
-+ struct snd_pcm_runtime *runtime;
-+ struct snd_dma_buffer *dmab = NULL;
-+
-+ substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
-+ snd_assert(substream != NULL, return -EINVAL);
-+ runtime = substream->runtime;
-+ snd_assert(runtime != NULL, return -EINVAL);
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ /* check if buffer is already allocated */
-+ if (runtime->dma_buffer_p) {
-+ size_t size_previouse;
-+ int pg_previouse;
-+
-+ /* new buffer is smaler than previouse allocated buffer */
-+ if (runtime->dma_buffer_p->bytes >= size) {
-+ runtime->dma_bytes = size;
-+ return 0; /* don't change buffer size */
-+ }
-+
-+ size_previouse = runtime->dma_buffer_p->bytes;
-+ pg_previouse = get_order(size_previouse);
-+
-+ dma_free_coherent(runtime->dma_buffer_p->dev.dev,
-+ PAGE_SIZE << pg_previouse,
-+ runtime->dma_buffer_p->area,
-+ runtime->dma_buffer_p->addr);
-+
-+ kfree(runtime->dma_buffer_p);
-+ }
-+
-+ dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
-+ if (!dmab)
-+ return -ENOMEM;
-+
-+ dmab->dev = substream->dma_buffer.dev;
-+ dmab->bytes = 0;
-+
-+ pg = get_order(size);
-+
-+ dmab->area = dma_alloc_coherent(
-+ substream->dma_buffer.dev.dev,
-+ PAGE_SIZE << pg,
-+ (dma_addr_t *)&dmab->addr,
-+ GFP_KERNEL);
-+
-+ if (!dmab->area) {
-+ kfree(dmab);
-+ return -ENOMEM;
-+ }
-+
-+ dmab->bytes = size;
-+
-+ snd_pcm_set_runtime_buffer(substream, dmab);
-+ runtime->dma_bytes = size;
-+ return 1;
-+#endif
-+}
-+
-+static int snd_atmel_ac97_capture_hw_params(snd_pcm_substream_t *substream,
-+ snd_pcm_hw_params_t *hw_params)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+ int err;
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+
-+ if (err < 0)
-+ return err;
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ return err;
-+#else
-+ int pg;
-+ size_t size = params_buffer_bytes(hw_params);
-+ struct snd_pcm_runtime *runtime;
-+ struct snd_dma_buffer *dmab = NULL;
-+
-+ substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
-+ snd_assert(substream != NULL, return -EINVAL);
-+ runtime = substream->runtime;
-+ snd_assert(runtime != NULL, return -EINVAL);
-+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
-+
-+ /* check if buffer is already allocated */
-+ if (runtime->dma_buffer_p) {
-+ size_t size_previouse;
-+ int pg_previouse;
-+
-+ /* new buffer is smaler than previouse allocated buffer */
-+ if (runtime->dma_buffer_p->bytes >= size) {
-+ runtime->dma_bytes = size;
-+ return 0; /* don't change buffer size */
-+ }
-+
-+ size_previouse = runtime->dma_buffer_p->bytes;
-+ pg_previouse = get_order(size_previouse);
-+
-+ dma_free_coherent(runtime->dma_buffer_p->dev.dev,
-+ PAGE_SIZE << pg_previouse,
-+ runtime->dma_buffer_p->area,
-+ runtime->dma_buffer_p->addr);
-+
-+ kfree(runtime->dma_buffer_p);
-+ }
-+
-+ dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
-+ if (!dmab)
-+ return -ENOMEM;
-+
-+ dmab->dev = substream->dma_buffer.dev;
-+ dmab->bytes = 0;
-+
-+ pg = get_order(size);
-+
-+ dmab->area = dma_alloc_coherent(
-+ substream->dma_buffer.dev.dev,
-+ PAGE_SIZE << pg,
-+ (dma_addr_t *)&dmab->addr,
-+ GFP_KERNEL);
-+
-+ if (!dmab->area) {
-+ kfree(dmab);
-+ return -ENOMEM;
-+ }
-+
-+ dmab->bytes = size;
-+
-+ snd_pcm_set_runtime_buffer(substream, dmab);
-+ runtime->dma_bytes = size;
-+ return 1;
-+#endif
-+}
-+
-+static int snd_atmel_ac97_playback_hw_free(snd_pcm_substream_t *substream)
-+{
-+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+ return snd_pcm_lib_free_pages(substream);
-+#else
-+ int pg;
-+ struct snd_pcm_runtime *runtime;
-+ struct snd_dma_buffer *dmab = NULL;
-+
-+ snd_assert(substream != NULL, return -EINVAL);
-+ runtime = substream->runtime;
-+ snd_assert(runtime != NULL, return -EINVAL);
-+ dmab = runtime->dma_buffer_p;
-+
-+ if (!dmab)
-+ return 0;
-+
-+ if (!dmab->area)
-+ return 0;
-+
-+ pg = get_order(dmab->bytes);
-+ dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
-+ kfree(runtime->dma_buffer_p);
-+ snd_pcm_set_runtime_buffer(substream, NULL);
-+ return 0;
-+#endif
-+}
-+
-+static int snd_atmel_ac97_capture_hw_free(snd_pcm_substream_t *substream)
-+{
-+
-+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+ return snd_pcm_lib_free_pages(substream);
-+#else
-+ int pg;
-+ struct snd_pcm_runtime *runtime;
-+ struct snd_dma_buffer *dmab = NULL;
-+
-+ snd_assert(substream != NULL, return -EINVAL);
-+ runtime = substream->runtime;
-+ snd_assert(runtime != NULL, return -EINVAL);
-+ dmab = runtime->dma_buffer_p;
-+
-+ if (!dmab)
-+ return 0;
-+
-+ if (!dmab->area)
-+ return 0;
-+
-+ pg = get_order(dmab->bytes);
-+ dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
-+ kfree(runtime->dma_buffer_p);
-+ snd_pcm_set_runtime_buffer(substream, NULL);
-+ return 0;
-+#endif
-+}
-+
-+static int snd_atmel_ac97_playback_prepare(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_TO_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, OCA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format){
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~AC97C_CMR_CEM_LITTLE;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ /* Initialize and start the PDC */
-+ ac97c_writel(chip, CATPR, runtime->dma_addr);
-+ ac97c_writel(chip, CATCR, block_size / 4);
-+ ac97c_writel(chip, CATNPR, runtime->dma_addr + block_size);
-+ ac97c_writel(chip, CATNCR, block_size / 4);
-+ ac97c_writel(chip, PTCR, PDC_PTCR_TXTEN);
-+ /* Enable Channel A interrupts */
-+ ac97c_writel(chip, IER, AC97C_SR_CAEVT);
-+#else
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_tx.buffer_size = buffer_size;
-+ chip->dma.req_tx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_tx.buffer_size !=
-+ (chip->dma.req_tx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.dev_id = chip;
-+#endif
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_capture_prepare(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
-+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_FROM_DEVICE);
-+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, ICA, word);
-+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
-+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~(AC97C_CMR_CEM_LITTLE);
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, word);
-+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~(AC97C_MR_VRA);
-+ ac97c_writel(chip, MR, word);
-+ }
-+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ /* Initialize and start the PDC */
-+ ac97c_writel(chip, CARPR, runtime->dma_addr);
-+ ac97c_writel(chip, CARCR, block_size / 4);
-+ ac97c_writel(chip, CARNPR, runtime->dma_addr + block_size);
-+ ac97c_writel(chip, CARNCR, block_size / 4);
-+ ac97c_writel(chip, PTCR, PDC_PTCR_RXEN);
-+ /* Enable Channel A interrupts */
-+ ac97c_writel(chip, IER, AC97C_SR_CAEVT);
-+#else
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
-+
-+ chip->dma.req_rx.buffer_size = buffer_size;
-+ chip->dma.req_rx.periods = runtime->periods;
-+
-+ BUG_ON(chip->dma.req_rx.buffer_size !=
-+ (chip->dma.req_rx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
-+
-+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.dev_id = chip;
-+#endif
-+
-+ return 0;
-+}
-+
-+static int snd_atmel_ac97_playback_trigger(snd_pcm_substream_t *substream, int cmd)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+ &chip->dma.req_tx);
-+ dma_start_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ camr |= (AC97C_CMR_CENA
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ |AC97C_CMR_TXRDY
-+#endif
-+ );
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ if (chip->opened <= 1) {
-+ camr &= ~(AC97C_CMR_CENA
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ |AC97C_CMR_TXRDY
-+#endif
-+ );
-+ }
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ else {
-+ camr &= ~(AC97C_CMR_TXRDY);
-+ }
-+#endif
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+static int snd_atmel_ac97_capture_trigger(snd_pcm_substream_t *substream, int cmd)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+ &chip->dma.req_rx);
-+ dma_start_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ camr |= (AC97C_CMR_CENA
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ | AC97C_CMR_RXRDY
-+#endif
-+ );
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ mutex_lock(&opened_mutex);
-+ if (chip->opened <= 1) {
-+ camr &= ~(AC97C_CMR_CENA
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ | AC97C_CMR_RXRDY
-+#endif
-+ );
-+ }
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ else {
-+ camr &= ~(AC97C_CSR_RXRDY);
-+ }
-+#endif
-+ mutex_unlock(&opened_mutex);
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
-+
-+ ac97c_writel(chip, CAMR, camr);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
-+
-+static snd_pcm_uframes_t snd_atmel_ac97_playback_pointer(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ bytes = ac97c_readl(chip, CATPR) - runtime->dma_addr;
-+#else
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+#endif
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+static snd_pcm_uframes_t snd_atmel_ac97_capture_pointer(snd_pcm_substream_t *substream)
-+{
-+ atmel_ac97_t *chip = snd_pcm_substream_chip(substream);
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ bytes = ac97c_readl(chip, CARPR) - runtime->dma_addr;
-+#else
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_rx.req.dmac,chip->dma.req_rx.req.channel) -
-+ runtime->dma_addr);
-+#endif
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+
-+ return pos;
-+}
-+
-+static snd_pcm_ops_t atmel_ac97_playback_ops = {
-+ .open = snd_atmel_ac97_playback_open,
-+ .close = snd_atmel_ac97_playback_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_playback_hw_params,
-+ .hw_free = snd_atmel_ac97_playback_hw_free,
-+ .prepare = snd_atmel_ac97_playback_prepare,
-+ .trigger = snd_atmel_ac97_playback_trigger,
-+ .pointer = snd_atmel_ac97_playback_pointer,
-+};
-+
-+static snd_pcm_ops_t atmel_ac97_capture_ops = {
-+ .open = snd_atmel_ac97_capture_open,
-+ .close = snd_atmel_ac97_capture_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_capture_hw_params,
-+ .hw_free = snd_atmel_ac97_capture_hw_free,
-+ .prepare = snd_atmel_ac97_capture_prepare,
-+ .trigger = snd_atmel_ac97_capture_trigger,
-+ .pointer = snd_atmel_ac97_capture_pointer,
-+};
-+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+ /* Playback */
-+ {
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)
-+ | (1 << AC97_SLOT_PCM_CENTER)
-+ | (1 << AC97_SLOT_PCM_SLEFT)
-+ | (1 << AC97_SLOT_PCM_SRIGHT)
-+ | (1 << AC97_SLOT_LFE)),
-+ } }
-+ },
-+ /* PCM in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)),
-+ } }
-+ },
-+ /* Mic in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = (1<<AC97_SLOT_MIC),
-+ } }
-+ },
-+};
-+
-+static int __devinit snd_atmel_ac97_pcm_new(atmel_ac97_t *chip)
-+{
-+ snd_pcm_t *pcm;
-+ int err;
-+
-+ err = snd_ac97_pcm_assign(chip->ac97_bus,
-+ ARRAY_SIZE(atmel_ac97_pcm_defs),
-+ atmel_ac97_pcm_defs);
-+ if (err)
-+ return err;
-+
-+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+ if (err)
-+ return err;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+ &atmel_ac97_playback_ops);
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+ &atmel_ac97_capture_ops);
-+
-+#ifdef SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+ &chip->pdev->dev,
-+ 128 * 1024, 128 * 1024);
-+#endif
-+
-+ pcm->private_data = chip;
-+ pcm->info_flags = 0;
-+ strcpy(pcm->name, "Atmel-AC97");
-+ chip->pcm = pcm;
-+
-+ return 0;
-+}
-+
-+/* Mixer part */
-+static int snd_atmel_ac97_mixer_new(atmel_ac97_t *chip)
-+{
-+ int err;
-+ ac97_template_t template;
-+
-+ memset(&template, 0, sizeof(template));
-+ template.private_data = chip;
-+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
-+
-+ return err;
-+}
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+static irqreturn_t snd_atmel_ac97_interrupt(int irq, void *dev_id,
-+ struct pt_regs *regs)
-+{
-+ atmel_ac97_t *chip = dev_id;
-+ unsigned long status;
-+
-+ status = ac97c_readl(chip, SR);
-+
-+ if (status & AC97C_SR_CAEVT) {
-+ snd_pcm_runtime_t *runtime;
-+ int offset, next_period, block_size;
-+ unsigned long casr;
-+
-+ /* FIXME: separate playback from capture */
-+ runtime = chip->playback_substream->runtime;
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+ casr = ac97c_readl(chip, CASR);
-+
-+ if (casr & AC97C_CSR_ENDTX) {
-+ chip->period++;
-+ if (chip->period == runtime->periods)
-+ chip->period = 0;
-+ next_period = chip->period + 1;
-+ if (next_period == runtime->periods)
-+ next_period = 0;
-+
-+ offset = block_size * next_period;
-+
-+ ac97c_writel(chip, CATNPR,
-+ runtime->dma_addr + offset);
-+ ac97c_writel(chip, CATNCR, block_size / 4);
-+
-+ snd_pcm_period_elapsed(chip->playback_substream);
-+ }
-+ else if (casr & AC97C_CSR_ENDRX) {
-+ chip->period++;
-+ if (chip->period == runtime->periods)
-+ chip->period = 0;
-+ next_period = chip->period + 1;
-+ if (next_period == runtime->periods)
-+ next_period = 0;
-+
-+ offset = block_size * next_period;
-+
-+ ac97c_writel(chip, CARNPR,
-+ runtime->dma_addr + offset);
-+ ac97c_writel(chip, CARNCR, block_size / 4);
-+
-+ snd_pcm_period_elapsed(chip->capture_substream);
-+ } else {
-+ snd_printk(KERN_INFO
-+ "atmel-ac97: spurious interrupt, status = 0x%08lx\n",
-+ (unsigned long)casr);
-+ }
-+ } else {
-+ snd_printk(KERN_INFO
-+ "atmel-ac97: spurious interrupt, status = 0x%08lx\n",
-+ status);
-+ }
-+
-+ (volatile int)ac97c_readl(chip, SR);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+#else
-+
-+static void atmel_ac97_error(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+
-+ printk(KERN_WARNING
-+ "DMA Controller error, channel %d (AC97C)\n",
-+ req->req.channel);
-+}
-+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
-+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ atmel_ac97_t *chip = req->dev_id;
-+ if (req->periph_id == chip->dma.tx_periph_id)
-+ snd_pcm_period_elapsed(chip->playback_substream);
-+ else
-+ snd_pcm_period_elapsed(chip->capture_substream);
-+}
-+
-+#endif
-+
-+/* CODEC part */
-+
-+static void snd_atmel_ac97_write(ac97_t *ac97, unsigned short reg,
-+ unsigned short val)
-+{
-+ atmel_ac97_t *chip = ac97->private_data;
-+ unsigned long word;
-+ int timeout = 40;
-+
-+ word = (reg & 0x7f) << 16 | val;
-+
-+ do {
-+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+ ac97c_writel(chip, COTHR, word);
-+ return;
-+ }
-+ udelay(1);
-+ } while (--timeout);
-+
-+ snd_printk(KERN_WARNING "atmel-ac97: codec write timeout\n");
-+}
-+
-+static unsigned short snd_atmel_ac97_read(ac97_t *ac97,
-+ unsigned short reg)
-+{
-+ atmel_ac97_t *chip = ac97->private_data;
-+ unsigned long word;
-+ int timeout = 40;
-+ int write = 10;
-+
-+ word = (0x80 | (reg & 0x7f)) << 16;
-+
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+ ac97c_readl(chip, CORHR);
-+
-+retry_write:
-+ timeout = 40;
-+
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+ ac97c_writel(chip, COTHR, word);
-+ goto read_reg;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+read_reg:
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0){
-+ unsigned short val = ac97c_readl(chip, CORHR);
-+ return val;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
-+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
-+
-+timed_out:
-+ snd_printk(KERN_INFO "atmel-ac97: codec read timeout\n");
-+ return 0xffff;
-+}
-+
-+static void snd_atmel_ac97_reset(atmel_ac97_t *chip)
-+{
-+ /* TODO: Perform hard reset of codec as well */
-+ ac97c_writel(chip, MR, AC97C_MR_WRST);
-+ mdelay(1);
-+ ac97c_writel(chip, MR, AC97C_MR_ENA);
-+}
-+
-+static void snd_atmel_ac97_destroy(snd_card_t *card)
-+{
-+ atmel_ac97_t *chip = get_chip(card);
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ if (chip->irq != -1)
-+ free_irq(chip->irq, chip);
-+#endif
-+ if (chip->regs)
-+ iounmap(chip->regs);
-+
-+ if (chip->mck) {
-+ clk_disable(chip->mck);
-+ clk_put(chip->mck);
-+ }
-+
-+#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ if (chip->dma.req_tx.req.dmac){
-+ dma_release_channel(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ }
-+ if (chip->dma.req_rx.req.dmac) {
-+ dma_release_channel(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ }
-+#endif
-+}
-+
-+static int __devinit snd_atmel_ac97_create(snd_card_t *card,
-+ struct platform_device *pdev)
-+{
-+ static ac97_bus_ops_t ops = {
-+ .write = snd_atmel_ac97_write,
-+ .read = snd_atmel_ac97_read,
-+ };
-+ atmel_ac97_t *chip = get_chip(card);
-+ struct resource *regs;
-+ struct clk *mck;
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ int irq;
-+#endif
-+ int err;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+#endif
-+
-+ mck = clk_get(&pdev->dev, "mck");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ clk_enable(mck);
-+ chip->mck = mck;
-+
-+ card->private_free = snd_atmel_ac97_destroy;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->pdev = pdev;
-+ chip->irq = -1;
-+
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ err = request_irq(irq, snd_atmel_ac97_interrupt, 0,
-+ "ac97", chip);
-+ if (err) {
-+ snd_printk("unable to request IRQ%d\n", irq);
-+ return err;
-+ }
-+ chip->irq = irq;
-+#endif
-+
-+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!chip->regs)
-+ return -ENOMEM;
-+
-+ snd_card_set_dev(card, &pdev->dev);
-+
-+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
-+
-+ return err;
-+}
-+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
-+{
-+ static int dev;
-+ snd_card_t *card;
-+ atmel_ac97_t *chip;
-+ int err;
-+ int ch;
-+
-+ if (dev >= SNDRV_CARDS)
-+ return -ENODEV;
-+ if (!enable[dev]) {
-+ dev++;
-+ return -ENOENT;
-+ }
-+
-+ err = -ENOMEM;
-+
-+ mutex_init(&opened_mutex);
-+
-+ card = snd_card_new(index[dev], id[dev], THIS_MODULE,
-+ sizeof(atmel_ac97_t));
-+ if (!card)
-+ goto out;
-+ chip = get_chip(card);
-+
-+ err = snd_atmel_ac97_create(card, pdev);
-+ if (err)
-+ goto out_free_card;
-+
-+ snd_atmel_ac97_reset(chip);
-+
-+ err = snd_atmel_ac97_mixer_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+ err = snd_atmel_ac97_pcm_new(chip);
-+ if (err)
-+ goto out_free_card;
-+
-+#ifndef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ /* TODO: Get this information from the platform device */
-+ chip->dma.req_tx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_tx.req.dmac) {
-+ printk(KERN_ERR
-+ "atmel-ac97c: No DMA controller for TX, aborting\n");
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_rx.req.dmac) {
-+ snd_printk(KERN_ERR
-+ "atmel-ac97c: No DMA controller available for RX, aborting\n");
-+ goto out_free_card;
-+ }
-+
-+ chip->dma.rx_periph_id = 3;
-+ chip->dma.tx_periph_id = 4;
-+
-+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+ if (ch < 0) {
-+ printk(KERN_ERR
-+ "atmel-ac97c: Unable to allocate TX DMA channel, aborting\n");
-+ goto out_free_card;
-+ }
-+ chip->dma.req_tx.req.channel = ch;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_tx.req.error = atmel_ac97_error;
-+
-+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+ if (ch < 0) {
-+ snd_printk(KERN_ERR
-+ "atmel-ac97c: Unable to allocate RX DMA channel, aborting\n");
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.channel = ch;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_rx.req.error = atmel_ac97_error;
-+#endif
-+
-+ strcpy(card->driver, "ac97c");
-+ strcpy(card->shortname, "Atmel-AC97");
-+#ifdef CONFIG_SND_ATMEL_AC97C_USE_PDC
-+ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, irq %i",
-+ chip->regs, chip->irq);
-+#else
-+ sprintf(card->longname, "Atmel AVR32 AC97 Controller at 0x%p, dma rx %i and tx %i",
-+ chip->regs, chip->dma.rx_periph_id, chip->dma.tx_periph_id);
-+#endif
-+
-+ err = snd_card_register(card);
-+ if (err)
-+ goto out_free_card;
-+
-+ platform_set_drvdata(pdev, card);
-+ dev++;
-+ return 0;
-+
-+out_free_card:
-+ snd_card_free(card);
-+out:
-+ return err;
-+}
-+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
-+{
-+ snd_card_t *card = platform_get_drvdata(pdev);
-+
-+ snd_card_free(card);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_ac97_driver = {
-+ .probe = snd_atmel_ac97_probe,
-+ .remove = __devexit_p(snd_atmel_ac97_remove),
-+ .driver = {
-+ .name = "ac97c",
-+ },
-+};
-+
-+static int __init atmel_ac97_init(void)
-+{
-+ return platform_driver_register(&atmel_ac97_driver);
-+}
-+
-+static void __exit atmel_ac97_exit(void)
-+{
-+ platform_driver_unregister(&atmel_ac97_driver);
-+}
-+
-+module_init(atmel_ac97_init);
-+module_exit(atmel_ac97_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-diff -urN linux-2.6.20.4-0rig/sound/avr32/ac97c.h linux-2.6.20.4-atmel/sound/avr32/ac97c.h
---- linux-2.6.20.4-0rig/sound/avr32/ac97c.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/avr32/ac97c.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,71 @@
-+/*
-+ * Register definitions for the Atmel AC97 Controller.
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR 0x08
-+#define AC97C_ICA 0x10
-+#define AC97C_OCA 0x14
-+#define AC97C_CARHR 0x20
-+#define AC97C_CATHR 0x24
-+#define AC97C_CASR 0x28
-+#define AC97C_CAMR 0x2c
-+#define AC97C_CBRHR 0x30
-+#define AC97C_CBTHR 0x34
-+#define AC97C_CBSR 0x38
-+#define AC97C_CBMR 0x3c
-+#define AC97C_CORHR 0x40
-+#define AC97C_COTHR 0x44
-+#define AC97C_COSR 0x48
-+#define AC97C_COMR 0x4c
-+#define AC97C_SR 0x50
-+#define AC97C_IER 0x54
-+#define AC97C_IDR 0x58
-+#define AC97C_IMR 0x5c
-+#define AC97C_VERSION 0xfc
-+
-+#define AC97C_CATPR PDC_TPR
-+#define AC97C_CATCR PDC_TCR
-+#define AC97C_CATNPR PDC_TNPR
-+#define AC97C_CATNCR PDC_TNCR
-+#define AC97C_CARPR PDC_RPR
-+#define AC97C_CARCR PDC_RCR
-+#define AC97C_CARNPR PDC_RNPR
-+#define AC97C_CARNCR PDC_RNCR
-+#define AC97C_PTCR PDC_PTCR
-+
-+#define AC97C_MR_ENA (1 << 0)
-+#define AC97C_MR_WRST (1 << 1)
-+#define AC97C_MR_VRA (1 << 2)
-+
-+#define AC97C_CSR_TXRDY (1 << 0)
-+#define AC97C_CSR_UNRUN (1 << 2)
-+#define AC97C_CSR_RXRDY (1 << 4)
-+#define AC97C_CSR_ENDTX (1 << 10)
-+#define AC97C_CSR_ENDRX (1 << 14)
-+
-+#define AC97C_CMR_SIZE_20 (0 << 16)
-+#define AC97C_CMR_SIZE_18 (1 << 16)
-+#define AC97C_CMR_SIZE_16 (2 << 16)
-+#define AC97C_CMR_SIZE_10 (3 << 16)
-+#define AC97C_CMR_CEM_LITTLE (1 << 18)
-+#define AC97C_CMR_CEM_BIG (0 << 18)
-+#define AC97C_CMR_CENA (1 << 21)
-+#define AC97C_CMR_PDCEN (1 << 22)
-+
-+#define AC97C_SR_CAEVT (1 << 3)
-+
-+#define AC97C_CH_ASSIGN(slot, channel) \
-+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE 0x0
-+#define AC97C_CHANNEL_A 0x1
-+#define AC97C_CHANNEL_B 0x2
-+
-+#endif /* __SOUND_AVR32_AC97C_H */
-diff -urN linux-2.6.20.4-0rig/sound/avr32/at73c213.c linux-2.6.20.4-atmel/sound/avr32/at73c213.c
---- linux-2.6.20.4-0rig/sound/avr32/at73c213.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/avr32/at73c213.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,1295 @@
-+/*
-+ * Driver for the at73c213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+#undef DEBUG
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kmod.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <sound/initval.h>
-+#include <sound/driver.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#ifndef SND_AT73C213_USE_ALSA_MALLOC_CALLS
-+#include <sound/memalloc.h>
-+#endif
-+
-+#include <linux/spi/spi.h>
-+
-+#include <asm/io.h>
-+#include <asm/processor.h>
-+
-+#include "at73c213.h"
-+
-+/* module parameters */
-+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
-+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
-+
-+/* Register defines */
-+#define PIOA_BASE 0xFFE02800
-+#define SSC0_BASE 0xFFE01C00
-+#define PM_BASE 0xFFF00000
-+
-+#define PM_CKSEL 0x04
-+#define PM_APBAMASK 0x10
-+#define PM_GCCTRL 0x60
-+
-+#define PIO_PER 0x00
-+#define PIO_PDR 0x04
-+#define PIO_PUER 0x64
-+#define PIO_ASR 0x70
-+#define PIO_BSR 0x74
-+
-+#define SSC_CMR 0x04
-+#define SSC_CR 0x00
-+#define SSC_TCMR 0x18
-+#define SSC_TFMR 0x1C
-+
-+/* SSC register definitions */
-+#define SSC_CR 0x00
-+#define SSC_CMR 0x04
-+#define SSC_TCMR 0x18
-+#define SSC_TFMR 0x1C
-+#define SSC_THR 0x24
-+#define SSC_SR 0x40
-+#define SSC_IER 0x44
-+#define SSC_IDR 0x48
-+#define SSC_IMR 0x4C
-+
-+/* SSC fields definitions */
-+#define SSC_CR_TXEN 0x00000100
-+#define SSC_CR_TXDIS 0x00000200
-+#define SSC_CR_SWRST 0x00008000
-+
-+/* SSC interrupt definitions */
-+#define SSC0_IRQ 10
-+#define SSC_INT_ENDTX 0x00000004
-+#define SSC_INT_TXBUFE 0x00000008
-+
-+/* PDC register definitions */
-+#define PDC_RPR 0x100
-+#define PDC_RCR 0x104
-+#define PDC_TPR 0x108
-+#define PDC_TCR 0x10c
-+#define PDC_RNPR 0x110
-+#define PDC_RNCR 0x114
-+#define PDC_TNPR 0x118
-+#define PDC_TNCR 0x11c
-+#define PDC_PTCR 0x120
-+#define PDC_PTSR 0x124
-+
-+/* PDC fields definitions */
-+#define PDC_PTCR_RXTEN 0x0001
-+#define PDC_PTCR_RXTDIS 0x0002
-+#define PDC_PTCR_TXTEN 0x0100
-+#define PDC_PTCR_TXTDIS 0x0200
-+
-+static int bitrate;
-+static int gclk_div;
-+static int ssc_div;
-+static int spi = 0;
-+static int ssc = 1;
-+
-+module_param(spi, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
-+MODULE_PARM_DESC(spi, "Which SPI interface to use to communicate with the at73c213");
-+module_param(ssc, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
-+MODULE_PARM_DESC(ssc, "Which SSC interface to use to communicate with the at73c213");
-+
-+/* Initial AT73C213 register values */
-+static unsigned char snd_at73c213_original_image[18] =
-+{
-+ 0x00, /* 00 - CTRL */
-+ 0x05, /* 01 - LLIG */
-+ 0x05, /* 02 - RLIG */
-+ 0x08, /* 03 - LPMG */
-+ 0x08, /* 04 - RPMG */
-+ 0x00, /* 05 - LLOG */
-+ 0x00, /* 06 - RLOG */
-+ 0x22, /* 07 - OLC */
-+ 0x09, /* 08 - MC */
-+ 0x00, /* 09 - CSFC */
-+ 0x00, /* 0A - MISC */
-+ 0x00, /* 0B - */
-+ 0x00, /* 0C - PRECH */
-+ 0x05, /* 0D - AUXG */
-+ 0x00, /* 0E - */
-+ 0x00, /* 0F - */
-+ 0x00, /* 10 - RST */
-+ 0x00, /* 11 - PA_CTRL */
-+};
-+
-+/* chip-specific data */
-+struct snd_at73c213 {
-+ snd_card_t *card;
-+ snd_pcm_t *pcm;
-+ snd_pcm_substream_t *substream;
-+ int irq;
-+ int period;
-+ void __iomem *regs;
-+ struct clk *ssc_clk;
-+ struct spi_device *spi;
-+ u8 spi_wbuffer[2];
-+ u8 spi_rbuffer[2];
-+ /* image of the SPI registers in AT73C213 */
-+ u8 image[18];
-+ spinlock_t lock;
-+ struct platform_device *pdev;
-+};
-+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
-+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer msg_xfer = {
-+ .len = 2,
-+ .cs_change = 0,
-+ };
-+
-+ spi_message_init(&msg);
-+
-+ chip->spi_wbuffer[0] = reg;
-+ chip->spi_wbuffer[1] = val;
-+
-+ msg_xfer.tx_buf = chip->spi_wbuffer;
-+ msg_xfer.rx_buf = chip->spi_rbuffer;
-+ spi_message_add_tail(&msg_xfer, &msg);
-+
-+ return spi_sync(chip->spi, &msg);
-+}
-+
-+#define write_reg(_spi, reg, val) \
-+ do { \
-+ retval = snd_at73c213_write_reg(_spi, reg, val); \
-+ if (retval) \
-+ goto out; \
-+ } while (0)
-+
-+static snd_pcm_hardware_t snd_at73c213_playback_hw = {
-+ .info = SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .rate_min = 8000, /* This will be overwritten with bitrate */
-+ .rate_max = 50000, /* This will be overwritten with bitrate */
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64 * 1024 - 1,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 64 * 1024 - 1,
-+ .periods_min = 4,
-+ .periods_max = 1024,
-+};
-+
-+/* calculate and set bitrate and divisions */
-+static int snd_at73c213_set_bitrate_and_div(void)
-+{
-+ extern struct avr32_cpuinfo boot_cpu_data;
-+ unsigned long pll0_hz, apba_hz;
-+ unsigned long apba_realdiv, gclk_realdiv, ssc_realdiv, wanted_bitrate;
-+ char cpusel, ahbsel, apbasel;
-+ int regval;
-+
-+ regval = __raw_readl((void __iomem *)PM_BASE + PM_CKSEL);
-+ wanted_bitrate = 48000;
-+
-+ cpusel = regval & 0x07;
-+ ahbsel = (regval>>8) & 0x07;
-+ apbasel = (regval>>16) & 0x07;
-+
-+ /* FIXME: Use the clk framework for this */
-+ if ((regval&(1<<7)) != 0) {
-+ pll0_hz = clk_get_rate(boot_cpu_data.clk)/(1<<(cpusel+1));
-+ } else {
-+ pll0_hz = clk_get_rate(boot_cpu_data.clk);
-+ }
-+
-+ if ((regval&(1<<23)) != 0) {
-+ apba_hz = pll0_hz/(1<<(apbasel+1));
-+ apba_realdiv = (1<<(apbasel+1));
-+ } else {
-+ apba_hz = pll0_hz;
-+ apba_realdiv = 1;
-+ }
-+
-+calculate:
-+ /* Adjust bitrate as close as possible to 48000 Hz */
-+ gclk_realdiv = pll0_hz/(wanted_bitrate*256);
-+ ssc_realdiv = 2 * apba_realdiv * gclk_realdiv;
-+
-+ if ((gclk_realdiv % 2) == 0)
-+ goto setbitrates;
-+
-+ if(wanted_bitrate >= 22050 && wanted_bitrate <= 48000)
-+ wanted_bitrate -= 50;
-+ else if (wanted_bitrate < 22050)
-+ wanted_bitrate = 48050;
-+ else if (wanted_bitrate <= 50000)
-+ wanted_bitrate += 50;
-+ else {
-+ printk(KERN_ERR "at73c213 could not set dividers for a valid bitrate\n");
-+ return -EINVAL;
-+ }
-+
-+ goto calculate;
-+
-+setbitrates:
-+ bitrate = pll0_hz/(gclk_realdiv*256);
-+ gclk_div = (gclk_realdiv/2)-1;
-+ ssc_realdiv = 2*apba_realdiv*gclk_realdiv;
-+ ssc_div = ssc_realdiv/(2*apba_realdiv);
-+
-+ printk(KERN_INFO "at73c213: bitrate is %d Hz\n", bitrate);
-+
-+ return 0;
-+}
-+
-+/* open callback */
-+static int snd_at73c213_pcm_open(snd_pcm_substream_t *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+
-+ snd_at73c213_playback_hw.rate_min = bitrate;
-+ snd_at73c213_playback_hw.rate_max = bitrate;
-+ runtime->hw = snd_at73c213_playback_hw;
-+ chip->substream = substream;
-+
-+ return 0;
-+}
-+
-+/* close callback */
-+static int snd_at73c213_pcm_close(snd_pcm_substream_t *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ chip->substream = NULL;
-+ return 0;
-+}
-+
-+/* hw_params callback */
-+static int snd_at73c213_pcm_hw_params(snd_pcm_substream_t *substream,
-+ snd_pcm_hw_params_t *hw_params)
-+{
-+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
-+ return snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+#else
-+ int pg;
-+ size_t size = params_buffer_bytes(hw_params);
-+ struct snd_pcm_runtime *runtime;
-+ struct snd_dma_buffer *dmab = NULL;
-+
-+ substream->dma_buffer.dev.type = SNDRV_DMA_TYPE_DEV;
-+ snd_assert(substream != NULL, return -EINVAL);
-+ runtime = substream->runtime;
-+ snd_assert(runtime != NULL, return -EINVAL);
-+
-+ /* check if buffer is already allocated */
-+ if (runtime->dma_buffer_p) {
-+ size_t size_previouse;
-+ int pg_previouse;
-+
-+ /* new buffer is smaler than previouse allocated buffer */
-+ if (runtime->dma_buffer_p->bytes >= size) {
-+ runtime->dma_bytes = size;
-+ return 0; /* don't change buffer size */
-+ }
-+
-+ size_previouse = runtime->dma_buffer_p->bytes;
-+ pg_previouse = get_order(size_previouse);
-+
-+ dma_free_coherent(runtime->dma_buffer_p->dev.dev,
-+ PAGE_SIZE << pg_previouse,
-+ runtime->dma_buffer_p->area,
-+ runtime->dma_buffer_p->addr);
-+
-+ kfree(runtime->dma_buffer_p);
-+ }
-+
-+ dmab = kzalloc(sizeof(*dmab), GFP_KERNEL);
-+ if (!dmab)
-+ return -ENOMEM;
-+
-+ dmab->dev = substream->dma_buffer.dev;
-+ dmab->bytes = 0;
-+
-+ pg = get_order(size);
-+
-+ dmab->area = dma_alloc_coherent(
-+ substream->dma_buffer.dev.dev,
-+ PAGE_SIZE << pg,
-+ (dma_addr_t *)&dmab->addr,
-+ GFP_KERNEL);
-+
-+ if (!dmab->area) {
-+ kfree(dmab);
-+ return -ENOMEM;
-+ }
-+
-+ dmab->bytes = size;
-+ snd_pcm_set_runtime_buffer(substream, dmab);
-+ runtime->dma_bytes = size;
-+ return 1;
-+#endif
-+}
-+
-+/* hw_free callback */
-+static int snd_at73c213_pcm_hw_free(snd_pcm_substream_t *substream)
-+{
-+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
-+ return snd_pcm_lib_free_pages(substream);
-+#else
-+ int pg;
-+ struct snd_pcm_runtime *runtime;
-+ struct snd_dma_buffer *dmab = NULL;
-+
-+ snd_assert(substream != NULL, return -EINVAL);
-+ runtime = substream->runtime;
-+ snd_assert(runtime != NULL, return -EINVAL);
-+ dmab = runtime->dma_buffer_p;
-+
-+ if (!dmab)
-+ return 0;
-+
-+ if (!dmab->area)
-+ return 0;
-+
-+ pg = get_order(dmab->bytes);
-+ dma_free_coherent(dmab->dev.dev, PAGE_SIZE << pg, dmab->area, dmab->addr);
-+ kfree(runtime->dma_buffer_p);
-+ snd_pcm_set_runtime_buffer(substream, NULL);
-+ return 0;
-+#endif
-+}
-+
-+/* prepare callback */
-+static int snd_at73c213_pcm_prepare(snd_pcm_substream_t *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+ int block_size;
-+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+ chip->period = 0;
-+
-+ /* Make sure that our data are actually readable by the SSC */
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size, DMA_TO_DEVICE);
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr + block_size,
-+ block_size, DMA_TO_DEVICE);
-+
-+ __raw_writel(runtime->dma_addr, chip->regs + PDC_TPR);
-+ __raw_writel(runtime->period_size * 2, chip->regs + PDC_TCR);
-+ __raw_writel(runtime->dma_addr + block_size, chip->regs + PDC_TNPR);
-+ __raw_writel(runtime->period_size * 2, chip->regs + PDC_TNCR);
-+
-+ return 0;
-+}
-+
-+/* trigger callback */
-+static int snd_at73c213_pcm_trigger(snd_pcm_substream_t *substream,
-+ int cmd)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ int retval = 0;
-+ int flags = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ __raw_writel(SSC_INT_ENDTX, chip->regs + SSC_IER);
-+ __raw_writel(PDC_PTCR_TXTEN, chip->regs + PDC_PTCR);
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ __raw_writel(PDC_PTCR_TXTDIS, chip->regs + PDC_PTCR);
-+ __raw_writel(SSC_INT_ENDTX, chip->regs + SSC_IDR);
-+ break;
-+ default:
-+ printk(KERN_WARNING "at73c213: spuriouse command %x\n", cmd);
-+ retval = -EINVAL;
-+ break;
-+ }
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return retval;
-+}
-+
-+/* pointer callback */
-+static snd_pcm_uframes_t snd_at73c213_pcm_pointer(snd_pcm_substream_t *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ snd_pcm_runtime_t *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
-+
-+ bytes = __raw_readl(chip->regs + PDC_TPR) - runtime->dma_addr;
-+
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
-+
-+ return pos;
-+}
-+
-+/* operators */
-+static snd_pcm_ops_t at73c213_playback_ops = {
-+ .open = snd_at73c213_pcm_open,
-+ .close = snd_at73c213_pcm_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_at73c213_pcm_hw_params,
-+ .hw_free = snd_at73c213_pcm_hw_free,
-+ .prepare = snd_at73c213_pcm_prepare,
-+ .trigger = snd_at73c213_pcm_trigger,
-+ .pointer = snd_at73c213_pcm_pointer,
-+};
-+
-+/* free a pcm device */
-+static void snd_at73c213_pcm_free(snd_pcm_t *pcm)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+ if (chip->pcm != 0 ) {
-+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
-+ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+#endif
-+ chip->pcm = NULL;
-+ }
-+}
-+
-+/* create a new pcm device */
-+static int __devinit snd_at73c213_new_pcm(struct snd_at73c213 *chip, int device)
-+{
-+ snd_pcm_t *pcm;
-+ int retval;
-+
-+ retval = snd_pcm_new(chip->card, chip->card->shortname, device, 1, 0, &pcm);
-+ if (retval < 0)
-+ return retval;
-+
-+ pcm->private_data = chip;
-+ pcm->private_free = snd_at73c213_pcm_free;
-+ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+ strcpy(pcm->name, "at73c213");
-+ chip->pcm = pcm;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+#ifdef SND_AT73C213_USE_ALSA_MALLOC_CALLS
-+ snd_pcm_lib_preallocate_pages_for_all(chip->pcm, SNDRV_DMA_TYPE_DEV,
-+ &chip->pdev->dev, 64 * 1024, 64 * 1024);
-+#endif
-+
-+ return 0;
-+}
-+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
-+{
-+ struct snd_at73c213 *chip = dev_id;
-+ struct platform_device *pdev = chip->pdev;
-+ snd_pcm_runtime_t *runtime = chip->substream->runtime;
-+ u32 status;
-+ int offset, next_period, block_size;
-+
-+ spin_lock(&chip->lock);
-+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+
-+ status = __raw_readl(chip->regs + SSC_IMR);
-+
-+ if (status & SSC_INT_ENDTX) {
-+ chip->period++;
-+ if (chip->period == runtime->periods)
-+ chip->period = 0;
-+ next_period = chip->period + 1;
-+ if (next_period == runtime->periods)
-+ next_period = 0;
-+
-+ offset = block_size * next_period;
-+
-+ /* Make sure that our data are actually readable by the SSC */
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr + offset,
-+ block_size, DMA_TO_DEVICE);
-+ __raw_writel(runtime->dma_addr + offset, chip->regs + PDC_TNPR);
-+ __raw_writel(runtime->period_size * 2, chip->regs + PDC_TNCR);
-+
-+ if (next_period == 0) {
-+ (void)__raw_readl(chip->regs + PDC_TPR);
-+ (void)__raw_readl(chip->regs + PDC_TCR);
-+ }
-+ } else {
-+ printk(KERN_WARNING
-+ "Spurious SSC interrupt, status = 0x%08lx\n",
-+ (unsigned long)status);
-+ __raw_writel(status, chip->regs + SSC_IDR);
-+ }
-+
-+ (void)__raw_readl(chip->regs + SSC_IMR);
-+ spin_unlock(&chip->lock);
-+
-+ if (status & SSC_INT_ENDTX)
-+ snd_pcm_period_elapsed(chip->substream);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/*
-+ * Mixer functions
-+ */
-+#if 0 /* Function not in use */
-+static int snd_at73c213_mono_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ unsigned long mask = (kcontrol->private_value >> 16) & 0xff;
-+
-+ uinfo->type = (mask == 1) ?
-+ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
-+}
-+#endif
-+
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & mask;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ val = (ucontrol->value.integer.value[0] & mask);
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ val = (chip->image[reg] & ~(mask << shift)) | val;
-+ change = val != chip->image[reg];
-+ write_reg(chip, reg, val);
-+
-+ chip->image[reg] = val;
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ int mask = (kcontrol->private_value >> 24) & 0xFF;
-+
-+ uinfo->type = mask == 1 ?
-+ SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ ucontrol->value.integer.value[0] =
-+ (chip->image[left_reg] >> shift_left) & mask;
-+ ucontrol->value.integer.value[1] =
-+ (chip->image[right_reg] >> shift_right) & mask;
-+
-+ if (invert) {
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+ ucontrol->value.integer.value[1] =
-+ (mask - ucontrol->value.integer.value[1]);
-+ }
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+ int change, retval;
-+ unsigned short val1, val2;
-+
-+ val1 = ucontrol->value.integer.value[0] & mask;
-+ val2 = ucontrol->value.integer.value[1] & mask;
-+ if (invert) {
-+ val1 = mask - val1;
-+ val2 = mask - val2;
-+ }
-+ val1 <<= shift_left;
-+ val2 <<= shift_right;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ val1 = (chip->image[left_reg] & ~(mask << shift_left)) | val1;
-+ val2 = (chip->image[right_reg] & ~(mask << shift_right)) | val2;
-+ change = val1 != chip->image[left_reg] || val2 != chip->image[right_reg];
-+ write_reg(chip, left_reg, val1);
-+ write_reg(chip, right_reg, val2);
-+
-+ chip->image[left_reg] = val1;
-+ chip->image[right_reg] = val2;
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 1;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ ucontrol->value.integer.value[0] = (chip->image[reg] >> shift) & 0x01;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (0x01 - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ unsigned long flags;
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ if (ucontrol->value.integer.value[0])
-+ val = mask;
-+ else
-+ val = 0;
-+
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+
-+ val |= (chip->image[reg] & ~(mask << shift));
-+ change = val != chip->image[reg];
-+
-+ write_reg(chip, reg, val);
-+
-+ chip->image[reg] = val;
-+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+
-+ return change;
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xFF) - 1;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_line_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_aux_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
-+
-+ return 0;
-+}
-+
-+#define AT73C213_MONO(xname, xindex, reg, shift, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+ .info = snd_at73c213_mono_info, \
-+ .get = snd_at73c213_mono_get, .put = snd_at73c213_mono_put, \
-+ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
-+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+ .info = snd_at73c213_mono_switch_info, \
-+ .get = snd_at73c213_mono_switch_get, .put = snd_at73c213_mono_switch_put, \
-+ .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
-+ .info = snd_at73c213_stereo_info, \
-+ .get = snd_at73c213_stereo_get, .put = snd_at73c213_stereo_put, \
-+ .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1F, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1F, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "PA Playback Volume",
-+ .index = 0,
-+ .info = snd_at73c213_pa_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = PA_CTRL|(PA_CTRL_APAGAIN<<8)|(0x0F<<16)|(1<<24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Aux Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_aux_capture_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = DAC_AUXG|(0<<8)|(0x1F<<16)|(1<<24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Line Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_line_capture_volume_info,
-+ .get = snd_at73c213_stereo_get,
-+ .put = snd_at73c213_stereo_put,
-+ .private_value = DAC_LLIG|(DAC_RLIG<<8)|(0<<16)|(0<<19)|(0x1F<<24)|(1<<22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
-+{
-+ struct snd_card *card;
-+ int errval, idx;
-+
-+ if (chip == NULL || chip->pcm == NULL)
-+ return -EINVAL;
-+
-+ card = chip->card;
-+
-+ strcpy(card->mixername, chip->pcm->name);
-+
-+ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+ if ((errval = snd_ctl_add(card,
-+ snd_ctl_new1(&snd_at73c213_controls[idx],
-+ chip))) < 0)
-+ return errval;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
-+{
-+ int retval;
-+ unsigned char dac_ctrl = 0;
-+
-+ /* XXX: Unmask the APB clock for SSC0 */
-+ __raw_writel(__raw_readl((void __iomem *)PM_BASE + PM_APBAMASK)|(1<<7),
-+ (void __iomem *)PM_BASE + PM_APBAMASK);
-+
-+ /* Wait for clock to be stable */
-+ msleep(10);
-+
-+ retval = snd_at73c213_set_bitrate_and_div();
-+ if (retval)
-+ goto out;
-+
-+ /* Reset the SSC */
-+ __raw_writel(SSC_CR_SWRST, chip->regs + SSC_CR);
-+
-+ /* Enable GCLK0 */
-+ __raw_writel((1<<30), (void __iomem *)(PIOA_BASE + PIO_PDR));
-+ __raw_writel((1<<30), (void __iomem *)(PIOA_BASE + PIO_ASR));
-+ __raw_writel(((gclk_div<<8)|0x10|0x04|0x02), (void __iomem *)(PM_BASE + PM_GCCTRL));
-+
-+ /* Enable SSC and setup for I2S */
-+ __raw_writel(ssc_div, chip->regs + SSC_CMR);
-+
-+ /* CKO, START, STTDLY, PERIOD */
-+ __raw_writel((1<<2)|(4<<8)|(1<<16)|(15<<24), chip->regs + SSC_TCMR);
-+
-+ /* DATLEN, MSBF, DATNB, FSLEN, FSOS */
-+ __raw_writel((15<<0)|(1<<7)|(1<<8)|(15<<16)|(1<<20), chip->regs + SSC_TFMR);
-+
-+ /* Initialize at73c213 on SPI bus */
-+ /* Reset the device */
-+ write_reg(chip, DAC_RST, 0x04);
-+ msleep(1);
-+ write_reg(chip, DAC_RST, 0x03);
-+
-+ /* Turn on precharge */
-+ write_reg(chip, DAC_PRECH, 0xFF);
-+ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+ write_reg(chip, DAC_CTRL, (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR));
-+
-+ msleep(50);
-+
-+ /* Stop precharging PA */
-+ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
-+ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
-+
-+ msleep(450);
-+
-+ /* Stop precharging, turn on master power */
-+ write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+ chip->image[DAC_PRECH] = (1<<DAC_PRECH_ONMSTR);
-+
-+ msleep(1);
-+
-+ /* Turn on DAC */
-+ dac_ctrl = (1<<DAC_CTRL_ONDACL)|(1<<DAC_CTRL_ONDACR)|
-+ (1<<DAC_CTRL_ONLNOL)|(1<<DAC_CTRL_ONLNOR);
-+
-+ write_reg(chip, DAC_CTRL, dac_ctrl);
-+ chip->image[DAC_CTRL] = dac_ctrl;
-+
-+ /* Mute sound */
-+ write_reg(chip, DAC_LMPG, 0x3F);
-+ chip->image[DAC_LMPG] = 0x3F;
-+ write_reg(chip, DAC_RMPG, 0x3F);
-+ chip->image[DAC_RMPG] = 0x3F;
-+ write_reg(chip, DAC_LLOG, 0x3F);
-+ chip->image[DAC_LLOG] = 0x3F;
-+ write_reg(chip, DAC_RLOG, 0x3F);
-+ chip->image[DAC_RLOG] = 0x3F;
-+ write_reg(chip, DAC_LLIG, 0x11);
-+ chip->image[DAC_LLIG] = 0x11;
-+ write_reg(chip, DAC_RLIG, 0x11);
-+ chip->image[DAC_RLIG] = 0x11;
-+ write_reg(chip, DAC_AUXG, 0x11);
-+ chip->image[DAC_AUXG] = 0x11;
-+
-+ /* Turn on SSC transmitter */
-+ __raw_writel(SSC_CR_TXEN, chip->regs + SSC_CR);
-+
-+out:
-+ return retval;
-+}
-+
-+static int snd_at73c213_dev_free(snd_device_t *device)
-+{
-+ struct snd_at73c213 *chip = device->device_data;
-+
-+ if (chip->regs) {
-+ __raw_writel(SSC_CR_TXDIS, chip->regs + SSC_CR);
-+ iounmap(chip->regs);
-+ }
-+
-+ if (chip->irq >= 0)
-+ free_irq(chip->irq, chip);
-+
-+ if (chip->ssc_clk) {
-+ clk_disable(chip->ssc_clk);
-+ clk_put(chip->ssc_clk);
-+ }
-+
-+ return 0;
-+}
-+
-+static int __devinit snd_at73c213_create(snd_card_t *card,
-+ struct platform_device *pdev)
-+{
-+ static snd_device_ops_t ops = {
-+ .dev_free = snd_at73c213_dev_free,
-+ };
-+ struct snd_at73c213 *chip = get_chip(card);
-+ struct resource *regs;
-+ struct clk *ssc_clk;
-+ int irq, retval;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ ssc_clk = clk_get(&pdev->dev, "mck");
-+ if (IS_ERR(ssc_clk))
-+ return PTR_ERR(ssc_clk);
-+ clk_enable(ssc_clk);
-+ chip->ssc_clk = ssc_clk;
-+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->pdev = pdev;
-+ chip->irq = -1;
-+
-+ retval = -ENOMEM;
-+
-+ retval = spi_setup(chip->spi);
-+ if (retval)
-+ goto out;
-+
-+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!chip->regs)
-+ goto out;
-+
-+ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+ if (retval) {
-+ snd_printk("unable to request IRQ%d\n", irq);
-+ goto out;
-+ }
-+ chip->irq = irq;
-+
-+ memcpy(&chip->image, &snd_at73c213_original_image,
-+ sizeof(snd_at73c213_original_image));
-+
-+ retval = snd_at73c213_chip_init(chip);
-+ if (retval)
-+ goto out;
-+
-+ retval = snd_at73c213_new_pcm(chip, 0);
-+ if (retval)
-+ goto out;
-+
-+ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+ if (retval)
-+ goto out;
-+
-+ retval = snd_at73c213_mixer(chip);
-+ if (retval)
-+ goto out;
-+
-+ snd_card_set_dev(card, &pdev->dev);
-+
-+out:
-+ return retval;
-+}
-+
-+static int __devinit snd_at73c213_probe(struct platform_device *pdev)
-+{
-+ static int dev;
-+ struct spi_board_info *binfo;
-+ struct spi_master *smaster;
-+ struct snd_at73c213 *chip;
-+ snd_card_t *card;
-+ int retval;
-+
-+ if (dev >= SNDRV_CARDS)
-+ return -ENODEV;
-+ if (!enable[dev]) {
-+ dev++;
-+ return -ENOENT;
-+ }
-+
-+ if (spi < 0 || ssc < 0)
-+ return -ENODEV;
-+
-+ retval = -ENOMEM;
-+ card = snd_card_new(index[dev], id[dev], THIS_MODULE,
-+ sizeof(struct snd_at73c213));
-+ if (!card)
-+ goto out;
-+
-+ chip = card->private_data;
-+
-+ retval = -ENODEV;
-+
-+ /* Get the SPI bus */
-+ binfo = pdev->dev.platform_data;
-+ if (!binfo) {
-+ printk(KERN_WARNING "at73c213: could not get platform data\n");
-+ goto out;
-+ }
-+
-+ smaster = spi_busnum_to_master(spi);
-+ if (!smaster) {
-+ request_module("spi1");
-+ smaster = spi_busnum_to_master(spi);
-+ if (!smaster) {
-+ printk(KERN_WARNING
-+ "at73c213: could not get "
-+ "SPI bus %d, remembered to load "
-+ "the spi_atmel module?\n", spi);
-+ goto out;
-+ }
-+ }
-+
-+ chip->spi = spi_new_device(smaster, binfo);
-+ if (!chip->spi) {
-+ printk(KERN_WARNING "at73c213: could not get SPI device %d\n", spi);
-+ goto out;
-+ }
-+
-+ chip->spi->mode = SPI_MODE_1;
-+ chip->spi->bits_per_word = 8;
-+
-+ retval = snd_at73c213_create(card, pdev);
-+ if (retval)
-+ goto out_free_card;
-+
-+ strcpy(card->driver, "at73c213");
-+ strcpy(card->shortname, "at73c213 (AVR32 STK1000)");
-+ sprintf(card->longname, "%s at %p (irq %i)", card->shortname, chip->regs, chip->irq);
-+
-+ retval = snd_card_register(card);
-+ if (retval)
-+ goto out_free_card;
-+
-+ platform_set_drvdata(pdev, card);
-+ dev++;
-+ return 0;
-+
-+out_free_card:
-+ snd_card_free(card);
-+out:
-+ return retval;
-+}
-+
-+static int __devexit snd_at73c213_remove(struct platform_device *pdev)
-+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+ struct snd_at73c213 *chip = card->private_data;
-+ int retval;
-+
-+ /* Stop playback */
-+ __raw_writel(SSC_CR_TXDIS, chip->regs + SSC_CR);
-+
-+ /* Stop GLCK0 */
-+ __raw_writel(0, (void __iomem *)PM_BASE + PM_GCCTRL);
-+
-+ /* Mute sound */
-+ write_reg(chip, DAC_LMPG, 0x3F);
-+ chip->image[DAC_LMPG] = 0x3F;
-+ write_reg(chip, DAC_RMPG, 0x3F);
-+ chip->image[DAC_RMPG] = 0x3F;
-+ write_reg(chip, DAC_LLOG, 0x3F);
-+ chip->image[DAC_LLOG] = 0x3F;
-+ write_reg(chip, DAC_RLOG, 0x3F);
-+ chip->image[DAC_RLOG] = 0x3F;
-+ write_reg(chip, DAC_LLIG, 0x11);
-+ chip->image[DAC_LLIG] = 0x11;
-+ write_reg(chip, DAC_RLIG, 0x11);
-+ chip->image[DAC_RLIG] = 0x11;
-+ write_reg(chip, DAC_AUXG, 0x11);
-+ chip->image[DAC_AUXG] = 0x11;
-+
-+ /* Turn off PA */
-+ write_reg(chip, PA_CTRL, (chip->image[PA_CTRL]|0x0F));
-+ chip->image[PA_CTRL] |= 0x0F;
-+ msleep(10);
-+ write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0F);
-+ chip->image[PA_CTRL] = (1<<PA_CTRL_APALP)|0x0F;
-+
-+ /* Turn off external DAC */
-+ write_reg(chip, DAC_CTRL, 0x0C);
-+ chip->image[DAC_CTRL] = 0x0C;
-+ msleep(2);
-+ write_reg(chip, DAC_CTRL, 0x00);
-+ chip->image[DAC_CTRL] = 0x00;
-+
-+ /* Turn off master power */
-+ write_reg(chip, DAC_PRECH, 0x00);
-+ chip->image[DAC_PRECH] = 0x00;
-+
-+ msleep(10);
-+
-+out:
-+ if (chip->spi)
-+ spi_unregister_device(chip->spi);
-+
-+ if (card) {
-+ snd_card_free(card);
-+ platform_set_drvdata(pdev, NULL);
-+ }
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct platform_device *pdev, pm_message_t state, u32 level)
-+{
-+ struct snd_card *card = at32_get_drvdata(pdev);
-+ struct snd_at73c213 *chip = card->private_data;
-+
-+ printk(KERN_DEBUG "at73c213: suspending\n");
-+
-+ /* Stop SSC and GCLK0 */
-+
-+ spi_suspend(chip->spi, state);
-+
-+ return 0;
-+}
-+
-+static int snd_at73c213_resume(struct platform_device *pdev, u32 level)
-+{
-+ struct snd_card *card = at32_get_drvdata(pdev);
-+ struct snd_at73c213 *chip = card->private_data;
-+
-+ printk(KERN_DEBUG "at73c213: resuming\n");
-+
-+ /* Start GLCK0 and SSC */
-+
-+ spi_resume(chip->spi);
-+
-+ return 0;
-+}
-+#endif /* CONFIG_PM */
-+
-+/* Driver core initialization */
-+static struct platform_driver at73c213_driver = {
-+ .probe = snd_at73c213_probe,
-+ .remove = __devexit_p(snd_at73c213_remove),
-+ .driver = {
-+ .name = "at73c213",
-+ }
-+#ifdef CONFIG_PM
-+ .resume = snd_at73c213_resume,
-+ .suspend = snd_at73c213_suspend,
-+#endif
-+};
-+
-+static int __init at73c213_init(void)
-+{
-+ return platform_driver_register(&at73c213_driver);
-+}
-+
-+static void __exit at73c213_exit(void)
-+{
-+ platform_driver_unregister(&at73c213_driver);
-+}
-+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for at73c213 on STK1000");
-+MODULE_LICENSE("GPL");
-+
-+module_init(at73c213_init);
-+module_exit(at73c213_exit);
-+
-diff -urN linux-2.6.20.4-0rig/sound/avr32/at73c213.h linux-2.6.20.4-atmel/sound/avr32/at73c213.h
---- linux-2.6.20.4-0rig/sound/avr32/at73c213.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/avr32/at73c213.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,120 @@
-+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
-+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
-+ */
-+
-+#ifndef _SND_AT73C213_MIXER_H_
-+#define _SND_AT73C213_MIXER_H_
-+
-+/* DAC control register */
-+#define DAC_CTRL 0x00
-+#define DAC_CTRL_ONPADRV 7
-+#define DAC_CTRL_ONAUXIN 6
-+#define DAC_CTRL_ONDACR 5
-+#define DAC_CTRL_ONDACL 4
-+#define DAC_CTRL_ONLNOR 3
-+#define DAC_CTRL_ONLNOL 2
-+#define DAC_CTRL_ONLNIR 1
-+#define DAC_CTRL_ONLNIL 0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG 0x01
-+#define DAC_LLIG_LLIG 0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG 0x02
-+#define DAC_RLIG_RLIG 0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG 0x03
-+#define DAC_LMPG_LMPG 0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG 0x04
-+#define DAC_RMPG_RMPG 0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG 0x05
-+#define DAC_LLOG_LLOG 0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG 0x06
-+#define DAC_RLOG_RLOG 0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC 0x07
-+#define DAC_OLC_RSHORT 7
-+#define DAC_OLC_ROLC 4
-+#define DAC_OLC_LSHORT 3
-+#define DAC_OLC_LOLC 0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC 0x08
-+#define DAC_MC_INVR 5
-+#define DAC_MC_INVL 4
-+#define DAC_MC_RMSMIN2 3
-+#define DAC_MC_RMSMIN1 2
-+#define DAC_MC_LMSMIN2 1
-+#define DAC_MC_LMSMIN1 0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC 0x09
-+#define DAC_CSFC_OVRSEL 4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC 0x0A
-+#define DAC_MISC_VCMCAPSEL 7
-+#define DAC_MISC_DINTSEL 4
-+#define DAC_MISC_DITHEN 3
-+#define DAC_MISC_DEEMPEN 2
-+#define DAC_MISC_NBITS 0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH 0x0C
-+#define DAC_PRECH_PRCHGPDRV 7
-+#define DAC_PRECH_PRCHGAUX1 6
-+#define DAC_PRECH_PRCHGLNOR 5
-+#define DAC_PRECH_PRCHGLNOL 4
-+#define DAC_PRECH_PRCHGLNIR 3
-+#define DAC_PRECH_PRCHGLNIL 2
-+#define DAC_PRECH_PRCHG 1
-+#define DAC_PRECH_ONMSTR 0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG 0x0D
-+#define DAC_AUXG_AUXG 0
-+
-+/* DAC Reset Register */
-+#define DAC_RST 0x10
-+#define DAC_RST_RESMASK 2
-+#define DAC_RST_RESFILZ 1
-+#define DAC_RST_RSTZ 0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL 0x11
-+#define PA_CTRL_APAON 6
-+#define PA_CTRL_APAPRECH 5
-+#define PA_CTRL_APALP 4
-+#define PA_CTRL_APAGAIN 0
-+
-+#endif
-+
-diff -urN linux-2.6.20.4-0rig/sound/avr32/Kconfig linux-2.6.20.4-atmel/sound/avr32/Kconfig
---- linux-2.6.20.4-0rig/sound/avr32/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/avr32/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,51 @@
-+# ALSA AVR32 drivers
-+
-+menu "ALSA AVR32 devices"
-+ depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+ tristate "Atmel AC97 Controller Driver"
-+ depends on SND
-+ select SND_PCM
-+ select SND_AC97_CODEC
-+ help
-+ ALSA sound driver for the Atmel AC97 controller.
-+
-+config SND_ATMEL_AC97_USE_ALSA_MALLOC_CALLS
-+ bool "Use the built-in malloc calls in the alsa driver"
-+ default n
-+ depends on SND_ATMEL_AC97
-+ help
-+ Say Y if the built-in malloc calls in the alsa driver should be
-+ used instead of the native dma_alloc_coherent and dma_free_coherent
-+ function calls. Enabling this feature may break the rmmod feature.
-+
-+config SND_ATMEL_AC97C_USE_PDC
-+ bool "Use PDC for DMA transfers to/from the Atmel AC97 Controller"
-+ default n
-+ depends on SND_ATMEL_AC97
-+ help
-+ Say Y if PDC (Peripheral DMA Controller) is used for DMA transfers
-+ to/from the Atmel AC97C instead of using the generic DMA framework.
-+
-+config SND_AT73C213
-+ tristate "Atmel AT73C213 DAC driver"
-+ depends on SND && SPI_ATMEL
-+ select SND_PCM
-+ help
-+ Say Y here if you want to use the Atmel AT73C213 external
-+ DAC on the ATSTK1000 development board.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called snd-at73c213.
-+
-+config SND_AT73C213_USE_ALSA_MALLOC_CALLS
-+ bool "Use the built-in malloc calls in the alsa driver"
-+ default n
-+ depends on SND_AT73C213
-+ help
-+ Say Y if the built-in malloc calls in the alsa driver should be
-+ used instead of the native dma_alloc_coherent and dma_free_coherent
-+ function calls. Enabling this feature may brake the rmmod feature.
-+
-+endmenu
-diff -urN linux-2.6.20.4-0rig/sound/avr32/Makefile linux-2.6.20.4-atmel/sound/avr32/Makefile
---- linux-2.6.20.4-0rig/sound/avr32/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/avr32/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,9 @@
-+#
-+# Makefile for ALSA
-+#
-+
-+snd-atmel-ac97-objs := ac97c.o
-+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
-+
-+snd-at73c213-objs := at73c213.o
-+obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
-diff -urN linux-2.6.20.4-0rig/sound/Kconfig linux-2.6.20.4-atmel/sound/Kconfig
---- linux-2.6.20.4-0rig/sound/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -62,6 +62,8 @@
-
- source "sound/arm/Kconfig"
-
-+source "sound/avr32/Kconfig"
-+
- source "sound/mips/Kconfig"
-
- # the following will depend on the order of config.
-diff -urN linux-2.6.20.4-0rig/sound/Makefile linux-2.6.20.4-atmel/sound/Makefile
---- linux-2.6.20.4-0rig/sound/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -6,6 +6,7 @@
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/
-+obj-$(CONFIG_SND) += avr32/
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
-diff -urN linux-2.6.20.4-0rig/sound/oss/at32dac.c linux-2.6.20.4-atmel/sound/oss/at32dac.c
---- linux-2.6.20.4-0rig/sound/oss/at32dac.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/oss/at32dac.c 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,720 @@
-+/*
-+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/sound.h>
-+#include <linux/soundcard.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+
-+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
-+#include <linux/byteorder/swabb.h>
-+
-+#include "at32dac.h"
-+
-+#define DMA_BUFFER_SIZE 32768
-+#define DMA_PERIOD_SHIFT 10
-+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
-+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
-+
-+struct sound_settings {
-+ unsigned int format;
-+ unsigned int channels;
-+ unsigned int sample_rate;
-+ /* log2(bytes per sample) */
-+ unsigned int input_order;
-+};
-+
-+struct at32_dac {
-+ spinlock_t lock;
-+ void __iomem *regs;
-+
-+ /* head and tail refer to number of words */
-+ struct {
-+ u32 *buf;
-+ int head;
-+ int tail;
-+ } dma;
-+
-+ struct semaphore sem;
-+ wait_queue_head_t write_wait;
-+
-+ /*
-+ * Read at most ucount bytes from ubuf, translate to 2-channel
-+ * signed 16-bit big endian format and write to the DMA buffer
-+ * as long as there is room left. Return the number of bytes
-+ * successfully copied from ubuf, or -EFAULT if the first
-+ * sample from ubuf couldn't be read. This function is not
-+ * called unless there is room for at least one sample (4
-+ * bytes) in the DMA buffer.
-+ */
-+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount);
-+
-+ struct sound_settings dsp_settings;
-+ struct dma_request_cyclic req;
-+
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ struct platform_device *pdev;
-+ int busy;
-+ int playing;
-+ int dev_dsp;
-+};
-+static struct at32_dac *the_dac;
-+
-+static inline unsigned int at32dac_get_head(struct at32_dac *dac)
-+{
-+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int at32dac_get_tail(struct at32_dac *dac)
-+{
-+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
-+}
-+
-+static inline unsigned int at32dac_dma_space(struct at32_dac *dac)
-+{
-+ unsigned int space;
-+
-+ space = ((dac->dma.tail - dac->dma.head - 1)
-+ & ((DMA_BUFFER_SIZE / 4) - 1));
-+ return space;
-+}
-+
-+static void at32dac_update_dma_tail(struct at32_dac *dac)
-+{
-+ dma_addr_t dma_addr;
-+ unsigned int new_tail;
-+
-+ if (dac->playing) {
-+ dma_addr = dma_get_current_pos(dac->req.req.dmac,
-+ dac->req.req.channel);
-+ new_tail = (dma_addr - dac->req.buffer_start) / 4;
-+ if (new_tail >= dac->dma.head
-+ && (dac->dma.tail < dac->dma.head
-+ || dac->dma.tail > new_tail))
-+ printk(KERN_NOTICE "at32dac: underrun\n");
-+ dac->dma.tail = new_tail;
-+ pr_debug("update tail: 0x%x - 0x%x = %u\n",
-+ dma_addr, dac->req.buffer_start, dac->dma.tail);
-+ }
-+}
-+
-+static int at32dac_start(struct at32_dac *dac)
-+{
-+ int ret;
-+
-+ if (dac->playing)
-+ return 0;
-+
-+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
-+
-+ clk_enable(dac->sample_clk);
-+
-+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
-+ if (ret)
-+ goto out_stop_clock;
-+
-+ pr_debug("Starting DMA...\n");
-+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
-+ if (ret)
-+ goto out_stop_request;
-+
-+ dac_writel(dac, CTRL, DAC_BIT(EN));
-+ dac->playing = 1;
-+
-+ return 0;
-+
-+out_stop_request:
-+ dma_stop_request(dac->req.req.dmac,
-+ dac->req.req.channel);
-+out_stop_clock:
-+ clk_disable(dac->sample_clk);
-+ return ret;
-+}
-+
-+static int at32dac_stop(struct at32_dac *dac)
-+{
-+ if (dac->playing) {
-+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+ dac->playing = 0;
-+ clk_disable(dac->sample_clk);
-+ }
-+
-+ return 0;
-+}
-+
-+static int at32dac_dma_prepare(struct at32_dac *dac)
-+{
-+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ &dac->req.buffer_start, GFP_KERNEL);
-+ if (!dac->dma.buf)
-+ return -ENOMEM;
-+
-+ dac->dma.head = dac->dma.tail = 0;
-+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
-+ dac->req.buffer_size = DMA_BUFFER_SIZE;
-+
-+ return 0;
-+}
-+
-+static void at32dac_dma_cleanup(struct at32_dac *dac)
-+{
-+ if (dac->dma.buf)
-+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ dac->dma.buf, dac->req.buffer_start);
-+ dac->dma.buf = NULL;
-+}
-+
-+static void at32dac_dma_block_complete(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
-+
-+ wake_up(&dac->write_wait);
-+}
-+
-+static void at32dac_dma_error(struct dma_request *req)
-+{
-+ printk(KERN_ERR "at32dac: DMA error\n");
-+}
-+
-+static irqreturn_t at32dac_interrupt(int irq, void *dev_id)
-+{
-+ struct at32_dac *dac = dev_id;
-+ u32 status;
-+
-+ status = dac_readl(dac, INT_STATUS);
-+ if (status & DAC_BIT(UNDERRUN)) {
-+ printk(KERN_ERR "at32dac: Underrun detected\n");
-+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
-+ } else {
-+ printk(KERN_ERR "at32dac: Spurious interrupt: status=0x%x\n",
-+ status);
-+ dac_writel(dac, INT_CLR, status);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!at32dac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[at32dac_get_head(dac)] = sample;
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!at32dac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[at32dac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!at32dac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ /* Swap bytes in each halfword */
-+ dac->dma.buf[at32dac_get_head(dac)] = swahb32(sample);
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!at32dac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ sample = swab16(sample);
-+ dac->dma.buf[at32dac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static ssize_t at32dac_dma_translate_from_user(struct at32_dac *dac,
-+ const char __user *buffer,
-+ size_t count)
-+{
-+ /* At least one buffer must be available at this point */
-+ pr_debug("at32dac: Copying %zu bytes from user...\n", count);
-+
-+ return dac->trans(dac, buffer, count);
-+}
-+
-+static int at32dac_set_format(struct at32_dac *dac, int format)
-+{
-+ unsigned int order;
-+
-+ switch (format) {
-+ case AFMT_S16_BE:
-+ order = 1;
-+ dac->trans = trans_s16be;
-+ break;
-+ case AFMT_S16_LE:
-+ order = 1;
-+ dac->trans = trans_s16le;
-+ break;
-+ default:
-+ printk("at32dac: Unsupported format: %d\n", format);
-+ return -EINVAL;
-+ }
-+
-+ if (dac->dsp_settings.channels == 2)
-+ order++;
-+
-+ dac->dsp_settings.input_order = order;
-+ dac->dsp_settings.format = format;
-+ return 0;
-+}
-+
-+static int at32dac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
-+{
-+ unsigned long new_rate;
-+ int ret;
-+
-+ ret = clk_set_rate(dac->sample_clk, 256 * rate);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* TODO: mplayer seems to have a problem with this */
-+#if 0
-+ new_rate = clk_get_rate(dac->sample_clk);
-+ dac->dsp_settings.sample_rate = new_rate / 256;
-+#else
-+ dac->dsp_settings.sample_rate = rate;
-+#endif
-+
-+ return 0;
-+}
-+
-+static ssize_t at32dac_dsp_write(struct file *file,
-+ const char __user *buffer,
-+ size_t count, loff_t *ppos)
-+{
-+ struct at32_dac *dac = file->private_data;
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned int avail;
-+ ssize_t copied;
-+ ssize_t ret;
-+
-+ /* Avoid address space checking in the translation functions */
-+ if (!access_ok(buffer, count, VERIFY_READ))
-+ return -EFAULT;
-+
-+ down(&dac->sem);
-+
-+ if (!dac->dma.buf) {
-+ ret = at32dac_dma_prepare(dac);
-+ if (ret)
-+ goto out;
-+ }
-+
-+ add_wait_queue(&dac->write_wait, &wait);
-+ ret = 0;
-+ while (count > 0) {
-+ do {
-+ at32dac_update_dma_tail(dac);
-+ avail = at32dac_dma_space(dac);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (avail >= DMA_WRITE_THRESHOLD)
-+ break;
-+
-+ if (file->f_flags & O_NONBLOCK) {
-+ if (!ret)
-+ ret = -EAGAIN;
-+ goto out;
-+ }
-+
-+ pr_debug("Going to wait (avail = %u, count = %zu)\n",
-+ avail, count);
-+
-+ up(&dac->sem);
-+ schedule();
-+ if (signal_pending(current)) {
-+ if (!ret)
-+ ret = -ERESTARTSYS;
-+ goto out_nosem;
-+ }
-+ down(&dac->sem);
-+ } while (1);
-+
-+ copied = at32dac_dma_translate_from_user(dac, buffer, count);
-+ if (copied < 0) {
-+ if (!ret)
-+ ret = -EFAULT;
-+ goto out;
-+ }
-+
-+ at32dac_start(dac);
-+
-+ count -= copied;
-+ ret += copied;
-+ }
-+
-+out:
-+ up(&dac->sem);
-+out_nosem:
-+ remove_wait_queue(&dac->write_wait, &wait);
-+ set_current_state(TASK_RUNNING);
-+ return ret;
-+}
-+
-+static int at32dac_dsp_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct at32_dac *dac = file->private_data;
-+ int __user *up = (int __user *)arg;
-+ struct audio_buf_info abinfo;
-+ int val, ret;
-+
-+ switch (cmd) {
-+ case OSS_GETVERSION:
-+ return put_user(SOUND_VERSION, up);
-+
-+ case SNDCTL_DSP_SPEED:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ if (val >= 0) {
-+ at32dac_stop(dac);
-+ ret = at32dac_set_sample_rate(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(dac->dsp_settings.sample_rate, up);
-+
-+ case SNDCTL_DSP_STEREO:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ at32dac_stop(dac);
-+ if (val && dac->dsp_settings.channels == 1)
-+ dac->dsp_settings.input_order++;
-+ else if (!val && dac->dsp_settings.channels != 1)
-+ dac->dsp_settings.input_order--;
-+ dac->dsp_settings.channels = val ? 2 : 1;
-+ return 0;
-+
-+ case SNDCTL_DSP_CHANNELS:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+
-+ if (val) {
-+ if (val < 0 || val > 2)
-+ return -EINVAL;
-+
-+ at32dac_stop(dac);
-+ dac->dsp_settings.input_order
-+ += val - dac->dsp_settings.channels;
-+ dac->dsp_settings.channels = val;
-+ }
-+ return put_user(val, (int *)arg);
-+
-+ case SNDCTL_DSP_GETFMTS:
-+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
-+
-+ case SNDCTL_DSP_SETFMT:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+
-+ if (val == AFMT_QUERY) {
-+ val = dac->dsp_settings.format;
-+ } else {
-+ ret = at32dac_set_format(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(val, up);
-+
-+ case SNDCTL_DSP_GETOSPACE:
-+ at32dac_update_dma_tail(dac);
-+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
-+ * (DMA_PERIOD_SIZE / 4));
-+ abinfo.bytes = (at32dac_dma_space(dac)
-+ << dac->dsp_settings.input_order);
-+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
-+ >> (DMA_PERIOD_SHIFT
-+ + dac->dsp_settings.input_order));
-+ abinfo.fragments = ((abinfo.bytes
-+ >> dac->dsp_settings.input_order)
-+ / (DMA_PERIOD_SIZE / 4));
-+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
-+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
-+ abinfo.bytes);
-+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
-+
-+ default:
-+ printk("at32dac: Unimplemented ioctl cmd: 0x%x\n", cmd);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int at32dac_dsp_open(struct inode *inode, struct file *file)
-+{
-+ struct at32_dac *dac = the_dac;
-+ int ret;
-+
-+ if (file->f_mode & FMODE_READ)
-+ return -ENXIO;
-+
-+ down(&dac->sem);
-+ ret = -EBUSY;
-+ if (dac->busy)
-+ goto out;
-+
-+ dac->dma.head = dac->dma.tail = 0;
-+
-+ /* FIXME: What are the correct defaults? */
-+ dac->dsp_settings.channels = 2;
-+ at32dac_set_format(dac, AFMT_S16_BE);
-+ ret = at32dac_set_sample_rate(dac, 8000);
-+ if (ret)
-+ goto out;
-+
-+ file->private_data = dac;
-+ dac->busy = 1;
-+
-+ ret = 0;
-+
-+out:
-+ up(&dac->sem);
-+ return ret;
-+}
-+
-+static int at32dac_dsp_release(struct inode *inode, struct file *file)
-+{
-+ struct at32_dac *dac = file->private_data;
-+
-+ down(&dac->sem);
-+
-+ at32dac_stop(dac);
-+ at32dac_dma_cleanup(dac);
-+ dac->busy = 0;
-+
-+ up(&dac->sem);
-+
-+ return 0;
-+}
-+
-+static struct file_operations at32dac_dsp_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = at32dac_dsp_write,
-+ .ioctl = at32dac_dsp_ioctl,
-+ .open = at32dac_dsp_open,
-+ .release = at32dac_dsp_release,
-+};
-+
-+static int __devinit at32dac_probe(struct platform_device *pdev)
-+{
-+ struct at32_dac *dac;
-+ struct resource *regs;
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ int irq;
-+ int ret;
-+
-+ if (the_dac)
-+ return -EBUSY;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
-+
-+ mck = clk_get(&pdev->dev, "mck");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ sample_clk = clk_get(&pdev->dev, "sample_clk");
-+ if (IS_ERR(sample_clk)) {
-+ ret = PTR_ERR(sample_clk);
-+ goto out_put_mck;
-+ }
-+ clk_enable(mck);
-+
-+ ret = -ENOMEM;
-+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
-+ if (!dac)
-+ goto out_disable_clk;
-+
-+ spin_lock_init(&dac->lock);
-+ init_MUTEX(&dac->sem);
-+ init_waitqueue_head(&dac->write_wait);
-+ dac->pdev = pdev;
-+ dac->mck = mck;
-+ dac->sample_clk = sample_clk;
-+
-+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dac->regs)
-+ goto out_free_dac;
-+
-+ ret = request_irq(irq, at32dac_interrupt, 0, "dac", dac);
-+ if (ret)
-+ goto out_unmap_regs;
-+
-+ /* FIXME */
-+ dac->req.req.dmac = find_dma_controller(0);
-+ if (!dac->req.req.dmac)
-+ goto out_free_irq;
-+
-+ ret = dma_alloc_channel(dac->req.req.dmac);
-+ if (ret < 0)
-+ goto out_free_irq;
-+
-+ dac->req.req.channel = ret;
-+ dac->req.req.block_complete = at32dac_dma_block_complete;
-+ dac->req.req.error = at32dac_dma_error;
-+ dac->req.data_reg = regs->start + DAC_DATA;
-+ dac->req.periph_id = 2; /* FIXME */
-+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ dac->req.width = DMA_WIDTH_32BIT;
-+
-+ /* Make sure the DAC is silent and disabled */
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+
-+ ret = register_sound_dsp(&at32dac_dsp_fops, -1);
-+ if (ret < 0)
-+ goto out_free_dma;
-+ dac->dev_dsp = ret;
-+
-+ /* TODO: Register mixer */
-+
-+ the_dac = dac;
-+ platform_set_drvdata(pdev, dac);
-+
-+ return 0;
-+
-+out_free_dma:
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+out_free_irq:
-+ free_irq(irq, dac);
-+out_unmap_regs:
-+ iounmap(dac->regs);
-+out_free_dac:
-+ kfree(dac);
-+out_disable_clk:
-+ clk_disable(mck);
-+ clk_put(sample_clk);
-+out_put_mck:
-+ clk_put(mck);
-+ return ret;
-+}
-+
-+static int __devexit at32dac_remove(struct platform_device *pdev)
-+{
-+ struct at32_dac *dac;
-+
-+ dac = platform_get_drvdata(pdev);
-+ if (dac) {
-+ unregister_sound_dsp(dac->dev_dsp);
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+ free_irq(platform_get_irq(pdev, 0), dac);
-+ iounmap(dac->regs);
-+ clk_disable(dac->mck);
-+ clk_put(dac->sample_clk);
-+ clk_put(dac->mck);
-+ kfree(dac);
-+ platform_set_drvdata(pdev, NULL);
-+ the_dac = NULL;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver at32dac_driver = {
-+ .probe = at32dac_probe,
-+ .remove = __devexit_p(at32dac_remove),
-+ .driver = {
-+ .name = "dac",
-+ },
-+};
-+
-+static int __init at32dac_init(void)
-+{
-+ return platform_driver_register(&at32dac_driver);
-+}
-+module_init(at32dac_init);
-+
-+static void __exit at32dac_exit(void)
-+{
-+ platform_driver_unregister(&at32dac_driver);
-+}
-+module_exit(at32dac_exit);
-+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("DMA Sound Driver for the Atmel AT32 on-chip DAC");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.20.4-0rig/sound/oss/at32dac.h linux-2.6.20.4-atmel/sound/oss/at32dac.h
---- linux-2.6.20.4-0rig/sound/oss/at32dac.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/oss/at32dac.h 2007-03-24 16:42:29.000000000 +0100
-@@ -0,0 +1,65 @@
-+/*
-+ * Register definitions for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_AVR32_DAC_H__
-+#define __ASM_AVR32_DAC_H__
-+
-+/* DAC register offsets */
-+#define DAC_DATA 0x0000
-+#define DAC_CTRL 0x0008
-+#define DAC_INT_MASK 0x000c
-+#define DAC_INT_EN 0x0010
-+#define DAC_INT_DIS 0x0014
-+#define DAC_INT_CLR 0x0018
-+#define DAC_INT_STATUS 0x001c
-+#define DAC_PDC_DATA 0x0020
-+
-+/* Bitfields in DATA */
-+#define DAC_DATA_OFFSET 0
-+#define DAC_DATA_SIZE 32
-+
-+/* Bitfields in CTRL */
-+#define DAC_SWAP_OFFSET 30
-+#define DAC_SWAP_SIZE 1
-+#define DAC_EN_OFFSET 31
-+#define DAC_EN_SIZE 1
-+
-+/* Bitfields in INT_MASK */
-+
-+/* Bitfields in INT_EN */
-+
-+/* Bitfields in INT_DIS */
-+#define DAC_TX_READY_OFFSET 29
-+#define DAC_TX_READY_SIZE 1
-+#define DAC_TX_BUFFER_EMPTY_OFFSET 30
-+#define DAC_TX_BUFFER_EMPTY_SIZE 1
-+#define DAC_CHANNEL_TX_END_OFFSET 31
-+#define DAC_CHANNEL_TX_END_SIZE 1
-+
-+/* Bitfields in INT_CLR */
-+#define DAC_UNDERRUN_OFFSET 28
-+#define DAC_UNDERRUN_SIZE 1
-+
-+/* Bitfields in INT_STATUS */
-+
-+/* Bitfields in PDC_DATA */
-+
-+/* Bit manipulation macros */
-+#define DAC_BIT(name) (1 << DAC_##name##_OFFSET)
-+#define DAC_BF(name,value) (((value) & ((1 << DAC_##name##_SIZE) - 1)) << DAC_##name##_OFFSET)
-+#define DAC_BFEXT(name,value) (((value) >> DAC_##name##_OFFSET) & ((1 << DAC_##name##_SIZE) - 1))
-+#define DAC_BFINS(name,value,old) (((old) & ~(((1 << DAC_##name##_SIZE) - 1) << DAC_##name##_OFFSET)) | DAC_BF(name,value))
-+
-+/* Register access macros */
-+#define dac_readl(port,reg) \
-+ __raw_readl((port)->regs + DAC_##reg)
-+#define dac_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + DAC_##reg)
-+
-+#endif /* __ASM_AVR32_DAC_H__ */
-diff -urN linux-2.6.20.4-0rig/sound/oss/Kconfig linux-2.6.20.4-atmel/sound/oss/Kconfig
---- linux-2.6.20.4-0rig/sound/oss/Kconfig 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/oss/Kconfig 2007-03-24 16:42:29.000000000 +0100
-@@ -750,3 +750,7 @@
- int "DAC channel"
- default "1"
- depends on SOUND_SH_DAC_AUDIO
-+
-+config SOUND_AT32_DAC
-+ tristate "Atmel AT32 On-chip DAC support"
-+ depends on SOUND_PRIME && AVR32
-diff -urN linux-2.6.20.4-0rig/sound/oss/Makefile linux-2.6.20.4-atmel/sound/oss/Makefile
---- linux-2.6.20.4-0rig/sound/oss/Makefile 2007-03-23 20:52:51.000000000 +0100
-+++ linux-2.6.20.4-atmel/sound/oss/Makefile 2007-03-24 16:42:29.000000000 +0100
-@@ -10,6 +10,7 @@
-
- # Please leave it as is, cause the link order is significant !
-
-+obj-$(CONFIG_SOUND_AT32_DAC) += at32dac.o
- obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
- obj-$(CONFIG_SOUND_HAL2) += hal2.o
- obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
+++ /dev/null
-diff -urN -x CVS linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S Tue May 8 12:13:30 2007
-@@ -67,6 +67,12 @@
- cmp r7, r3
- beq 99f
-
-+ @ Promwad Chub : 1181
-+ mov r3, #(MACH_TYPE_CHUB & 0xff)
-+ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00)
-+ cmp r7, r3
-+ beq 99f
-+
- @ Unknown board, use the AT91RM9200DK board
- @ mov r7, #MACH_TYPE_AT91RM9200
- mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
-diff -urN -x CVS linux-2.6.21/arch/arm/configs/at91sam9260ek_defconfig linux-2.6-stable/arch/arm/configs/at91sam9260ek_defconfig
---- linux-2.6.21/arch/arm/configs/at91sam9260ek_defconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/configs/at91sam9260ek_defconfig Tue May 8 12:13:30 2007
-@@ -1,18 +1,24 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.19-rc6
--# Fri Nov 17 18:42:21 2006
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:42:02 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-@@ -31,13 +37,16 @@
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
- # CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_UTS_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -76,7 +85,9 @@
- # Block layer
- #
- CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-
- #
- # IO Schedulers
-@@ -110,10 +121,12 @@
- # CONFIG_ARCH_IMX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -129,21 +142,29 @@
- # CONFIG_ARCH_AT91RM9200 is not set
- CONFIG_ARCH_AT91SAM9260=y
- # CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+
-+#
-+# AT91SAM9260 Variants
-+#
-+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
- #
--# AT91SAM9260 Board Type
-+# AT91SAM9260 / AT91SAM9XE Board Type
- #
- CONFIG_MACH_AT91SAM9260EK=y
-
- #
- # AT91 Board Options
- #
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
- # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-
- #
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
-@@ -166,6 +187,7 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
-@@ -193,6 +215,7 @@
- # CONFIG_SPARSEMEM_STATIC is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -203,6 +226,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -228,7 +252,6 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-
- #
- # Networking
-@@ -242,9 +265,6 @@
- CONFIG_PACKET=y
- # CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
--CONFIG_XFRM=y
--# CONFIG_XFRM_USER is not set
--# CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -263,14 +283,15 @@
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
- # CONFIG_INET_TUNNEL is not set
--CONFIG_INET_XFRM_MODE_TRANSPORT=y
--CONFIG_INET_XFRM_MODE_TUNNEL=y
--CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_INET6_XFRM_TUNNEL is not set
- # CONFIG_INET6_TUNNEL is not set
-@@ -328,6 +349,7 @@
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
-
- #
-@@ -348,6 +370,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -360,7 +383,6 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-
-@@ -369,6 +391,7 @@
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
-@@ -388,6 +411,7 @@
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
- # SCSI Transports
-@@ -405,6 +429,11 @@
- # CONFIG_SCSI_DEBUG is not set
-
- #
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
- # Multi-device support (RAID and LVM)
- #
- # CONFIG_MD is not set
-@@ -425,7 +454,51 @@
- #
- # Network device support
- #
--# CONFIG_NETDEVICES is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-
-@@ -517,10 +590,6 @@
- # CONFIG_NVRAM is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
--
--#
--# Ftape, the floppy tape device driver
--#
- # CONFIG_RAW_DRIVER is not set
-
- #
-@@ -553,7 +622,11 @@
- #
- # Misc devices
- #
--# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
- # LED devices
-@@ -582,7 +655,7 @@
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
- # CONFIG_FB is not set
-
- #
-@@ -590,7 +663,6 @@
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
-@@ -598,6 +670,12 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
-@@ -610,7 +688,6 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -619,7 +696,8 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
-@@ -671,6 +749,7 @@
- # CONFIG_USB_ATI_REMOTE2 is not set
- # CONFIG_USB_KEYSPAN_REMOTE is not set
- # CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
-@@ -708,6 +787,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -717,6 +797,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -889,6 +970,11 @@
- # CONFIG_NLS_UTF8 is not set
-
- #
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
- # Profiling support
- #
- # CONFIG_PROFILING is not set
-@@ -900,28 +986,30 @@
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
--# CONFIG_HEADERS_CHECK is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -941,9 +1029,12 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.21/arch/arm/configs/at91sam9261ek_defconfig linux-2.6-stable/arch/arm/configs/at91sam9261ek_defconfig
---- linux-2.6.21/arch/arm/configs/at91sam9261ek_defconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/configs/at91sam9261ek_defconfig Tue May 8 12:13:30 2007
-@@ -1,18 +1,24 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.19-rc6
--# Fri Nov 17 18:00:38 2006
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:42:30 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-@@ -31,13 +37,16 @@
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
- # CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_UTS_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -76,7 +85,9 @@
- # Block layer
- #
- CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-
- #
- # IO Schedulers
-@@ -110,10 +121,12 @@
- # CONFIG_ARCH_IMX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -129,6 +142,7 @@
- # CONFIG_ARCH_AT91RM9200 is not set
- # CONFIG_ARCH_AT91SAM9260 is not set
- CONFIG_ARCH_AT91SAM9261=y
-+# CONFIG_ARCH_AT91SAM9263 is not set
-
- #
- # AT91SAM9261 Board Type
-@@ -138,12 +152,14 @@
- #
- # AT91 Board Options
- #
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
- # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-
- #
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
-@@ -166,6 +182,7 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
-@@ -193,6 +210,7 @@
- # CONFIG_SPARSEMEM_STATIC is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -203,6 +221,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -228,7 +247,6 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-
- #
- # Networking
-@@ -245,6 +263,7 @@
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
- # CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -271,6 +290,7 @@
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_INET6_XFRM_TUNNEL is not set
- # CONFIG_INET6_TUNNEL is not set
-@@ -328,6 +348,7 @@
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
-
- #
-@@ -350,6 +371,7 @@
- # User Modules And Translation Layers
- #
- # CONFIG_MTD_CHAR is not set
-+CONFIG_MTD_BLKDEVS=y
- CONFIG_MTD_BLOCK=y
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
-@@ -386,6 +408,8 @@
- #
- # Self-contained MTD device drivers
- #
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -422,6 +446,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -434,7 +459,6 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-
-@@ -443,6 +467,7 @@
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
-@@ -462,6 +487,7 @@
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
- # SCSI Transports
-@@ -479,6 +505,11 @@
- # CONFIG_SCSI_DEBUG is not set
-
- #
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
- # Multi-device support (RAID and LVM)
- #
- # CONFIG_MD is not set
-@@ -575,7 +606,16 @@
- # CONFIG_INPUT_KEYBOARD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
--# CONFIG_INPUT_TOUCHSCREEN is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
- # CONFIG_INPUT_MISC is not set
-
- #
-@@ -634,10 +674,6 @@
- # CONFIG_NVRAM is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
--
--#
--# Ftape, the floppy tape device driver
--#
- # CONFIG_RAW_DRIVER is not set
-
- #
-@@ -662,6 +698,7 @@
- # I2C Hardware Bus support
- #
- CONFIG_I2C_AT91=y
-+CONFIG_I2C_AT91_CLOCKRATE=100000
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
-@@ -686,8 +723,20 @@
- #
- # SPI support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-
- #
- # Dallas's 1-wire bus
-@@ -703,7 +752,11 @@
- #
- # Misc devices
- #
--# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
- # LED devices
-@@ -732,7 +785,7 @@
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
- # CONFIG_FB is not set
-
- #
-@@ -740,7 +793,6 @@
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
-@@ -748,6 +800,12 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
-@@ -760,7 +818,6 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -769,7 +826,8 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
-@@ -821,6 +879,7 @@
- # CONFIG_USB_ATI_REMOTE2 is not set
- # CONFIG_USB_KEYSPAN_REMOTE is not set
- # CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
-@@ -858,6 +917,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -867,6 +927,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -903,7 +964,6 @@
- # CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
- CONFIG_MMC_AT91=m
--# CONFIG_MMC_TIFM_SD is not set
-
- #
- # Real Time Clock
-@@ -973,7 +1033,6 @@
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
--# CONFIG_JFFS_FS is not set
- # CONFIG_JFFS2_FS is not set
- CONFIG_CRAMFS=y
- # CONFIG_VXFS_FS is not set
-@@ -1045,6 +1104,11 @@
- # CONFIG_NLS_UTF8 is not set
-
- #
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
- # Profiling support
- #
- # CONFIG_PROFILING is not set
-@@ -1056,28 +1120,30 @@
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
--# CONFIG_HEADERS_CHECK is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1097,9 +1163,12 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.21/arch/arm/configs/at91sam9263ek_defconfig linux-2.6-stable/arch/arm/configs/at91sam9263ek_defconfig
---- linux-2.6.21/arch/arm/configs/at91sam9263ek_defconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/configs/at91sam9263ek_defconfig Tue May 8 12:13:30 2007
-@@ -1,11 +1,14 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.20-rc1
--# Mon Jan 8 16:06:54 2007
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:42:49 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
-@@ -15,6 +18,7 @@
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-@@ -33,6 +37,7 @@
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
- # CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
-@@ -41,6 +46,7 @@
- # CONFIG_IKCONFIG is not set
- CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -120,6 +126,7 @@
- # CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -152,6 +159,7 @@
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
-@@ -174,6 +182,7 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
-@@ -201,6 +210,7 @@
- # CONFIG_SPARSEMEM_STATIC is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -211,6 +221,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -236,7 +247,6 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-
- #
- # Networking
-@@ -333,6 +343,7 @@
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
-
- #
-@@ -430,6 +441,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -443,7 +455,6 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-
-@@ -531,6 +542,7 @@
- #
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+CONFIG_MACB=y
- # CONFIG_SMC91X is not set
- # CONFIG_DM9000 is not set
-
-@@ -685,6 +697,7 @@
- # I2C Hardware Bus support
- #
- CONFIG_I2C_AT91=y
-+CONFIG_I2C_AT91_CLOCKRATE=100000
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
-@@ -722,6 +735,7 @@
- #
- # SPI Protocol Masters
- #
-+# CONFIG_SPI_AT25 is not set
-
- #
- # Dallas's 1-wire bus
-@@ -737,7 +751,11 @@
- #
- # Misc devices
- #
--# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
- # LED devices
-@@ -766,15 +784,23 @@
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
- CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
- # CONFIG_FB_CFB_FILLRECT is not set
- # CONFIG_FB_CFB_COPYAREA is not set
- # CONFIG_FB_CFB_IMAGEBLIT is not set
-+# CONFIG_FB_SVGALIB is not set
- # CONFIG_FB_MACMODES is not set
- # CONFIG_FB_BACKLIGHT is not set
- # CONFIG_FB_MODE_HELPERS is not set
- # CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D15605 is not set
- # CONFIG_FB_S1D13XXX is not set
- # CONFIG_FB_VIRTUAL is not set
-
-@@ -789,7 +815,6 @@
- # Logo configuration
- #
- # CONFIG_LOGO is not set
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
-@@ -800,6 +825,7 @@
- # HID Devices
- #
- CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-
- #
- # USB support
-@@ -814,9 +840,7 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
--# CONFIG_USB_MULTITHREAD_PROBE is not set
- # CONFIG_USB_OTG is not set
-
- #
-@@ -824,7 +848,8 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
-@@ -877,6 +902,7 @@
- # CONFIG_USB_ATI_REMOTE2 is not set
- # CONFIG_USB_KEYSPAN_REMOTE is not set
- # CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
-@@ -914,6 +940,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -923,6 +950,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -959,7 +987,6 @@
- # CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
- CONFIG_MMC_AT91=m
--# CONFIG_MMC_TIFM_SD is not set
-
- #
- # Real Time Clock
-@@ -1136,15 +1163,16 @@
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -1155,6 +1183,7 @@
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1180,5 +1209,7 @@
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
- CONFIG_PLIST=y
--CONFIG_IOMAP_COPY=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.21/arch/arm/configs/at91sam9rlek_defconfig linux-2.6-stable/arch/arm/configs/at91sam9rlek_defconfig
---- linux-2.6.21/arch/arm/configs/at91sam9rlek_defconfig Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/configs/at91sam9rlek_defconfig Wed May 9 10:20:54 2007
-@@ -0,0 +1,957 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.21
-+# Mon May 7 16:30:40 2007
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+CONFIG_KMOD=y
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+# CONFIG_IOSCHED_DEADLINE is not set
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+CONFIG_ARCH_AT91SAM9RL=y
-+
-+#
-+# AT91SAM9RL Board Type
-+#
-+CONFIG_MACH_AT91SAM9RLEK=y
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+# CONFIG_ARM_THUMB is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+# CONFIG_PACKET is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+# CONFIG_INET is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+# CONFIG_PNPACPI is not set
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=4
-+CONFIG_BLK_DEV_RAM_SIZE=24576
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+CONFIG_SCSI_MULTI_LUN=y
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+
-+#
-+# SCSI low-level drivers
-+#
-+# CONFIG_SCSI_DEBUG is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+# CONFIG_NETDEVICES is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+# CONFIG_TOUCHSCREEN_ADS7846 is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Misc devices
-+#
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+
-+#
-+# Logo configuration
-+#
-+# CONFIG_LOGO is not set
-+
-+#
-+# Sound
-+#
-+CONFIG_SOUND=y
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=y
-+CONFIG_SND_TIMER=y
-+CONFIG_SND_PCM=y
-+CONFIG_SND_SEQUENCER=y
-+CONFIG_SND_SEQ_DUMMY=y
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=y
-+CONFIG_SND_PCM_OSS=y
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+CONFIG_SND_SEQUENCER_OSS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+CONFIG_SND_SUPPORT_OLD_API=y
-+CONFIG_SND_VERBOSE_PROCFS=y
-+CONFIG_SND_VERBOSE_PRINTK=y
-+CONFIG_SND_DEBUG=y
-+CONFIG_SND_DEBUG_DETECT=y
-+# CONFIG_SND_PCM_XRUN_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_VIRMIDI is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# ALSA ARM devices
-+#
-+
-+#
-+# SoC audio support
-+#
-+# CONFIG_SND_SOC is not set
-+
-+#
-+# Open Sound System
-+#
-+# CONFIG_SOUND_PRIME is not set
-+
-+#
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+# CONFIG_USB is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_AT91=y
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+# CONFIG_EXT3_FS is not set
-+# CONFIG_EXT4DEV_FS is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+# CONFIG_JFFS2_FS is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+CONFIG_NLS_ISO8859_15=y
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+CONFIG_DEBUG_USER=y
-+# CONFIG_DEBUG_ERRORS is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.21/arch/arm/configs/cam60_defconfig linux-2.6-stable/arch/arm/configs/cam60_defconfig
---- linux-2.6.21/arch/arm/configs/cam60_defconfig Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/configs/cam60_defconfig Tue May 8 12:13:30 2007
-@@ -0,0 +1,954 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.20
-+# Tue May 1 21:06:33 2007
-+#
-+CONFIG_ARM=y
-+# CONFIG_GENERIC_TIME is not set
-+CONFIG_MMU=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+# CONFIG_IOSCHED_DEADLINE is not set
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+CONFIG_ARCH_AT91SAM9260=y
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+
-+#
-+# AT91SAM9260 Board Type
-+#
-+# CONFIG_MACH_AT91SAM9260EK is not set
-+CONFIG_MACH_CAM60=y
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+# CONFIG_ARM_THUMB is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+
-+#
-+# Bus support
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x22000000
-+CONFIG_ZBOOT_ROM_BSS=0x20004000
-+# CONFIG_ZBOOT_ROM is not set
-+CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock3 rootfstype=jffs2 mem=64M"
-+# CONFIG_XIP_KERNEL is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+# CONFIG_APM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+# CONFIG_MTD_PHYSMAP is not set
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+# CONFIG_MTD_NAND is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+# CONFIG_BLK_DEV_LOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+CONFIG_BLK_DEV_INITRD=y
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_NETLINK is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_TIFM_CORE is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# HID Devices
-+#
-+# CONFIG_HID is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+# CONFIG_USB is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+CONFIG_AUTOFS4_FS=y
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+# CONFIG_MSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+CONFIG_DEBUG_USER=y
-+# CONFIG_DEBUG_ERRORS is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_IOMAP_COPY=y
-diff -urN -x CVS linux-2.6.21/arch/arm/configs/kb9202_defconfig linux-2.6-stable/arch/arm/configs/kb9202_defconfig
---- linux-2.6.21/arch/arm/configs/kb9202_defconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/configs/kb9202_defconfig Tue May 8 12:13:30 2007
-@@ -1,19 +1,31 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.13-rc2
--# Sun Aug 14 19:26:59 2005
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:43:14 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
--CONFIG_UID16=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
- # Code maturity level options
- #
--# CONFIG_EXPERIMENTAL is not set
--CONFIG_CLEAN_COMPILE=y
-+CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-
-@@ -21,54 +33,103 @@
- # General setup
- #
- CONFIG_LOCALVERSION=""
--# CONFIG_SWAP is not set
--# CONFIG_SYSVIPC is not set
--# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+CONFIG_AUDIT=y
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
--# CONFIG_AUDIT is not set
--CONFIG_HOTPLUG=y
--# CONFIG_KOBJECT_UEVENT is not set
--# CONFIG_IKCONFIG is not set
- # CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
- CONFIG_KALLSYMS=y
- # CONFIG_KALLSYMS_ALL is not set
--# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
- CONFIG_EPOLL=y
--CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SHMEM=y
--CONFIG_CC_ALIGN_FUNCTIONS=0
--CONFIG_CC_ALIGN_LABELS=0
--CONFIG_CC_ALIGN_LOOPS=0
--CONFIG_CC_ALIGN_JUMPS=0
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-
- #
- # Loadable module support
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--CONFIG_OBSOLETE_MODPARM=y
--# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
- CONFIG_KMOD=y
-
- #
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
- # System Type
- #
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
- # CONFIG_ARCH_CLPS7500 is not set
- # CONFIG_ARCH_CLPS711X is not set
- # CONFIG_ARCH_CO285 is not set
- # CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
- # CONFIG_ARCH_FOOTBRIDGE is not set
--# CONFIG_ARCH_INTEGRATOR is not set
--# CONFIG_ARCH_IOP3XX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
- # CONFIG_ARCH_SA1100 is not set
-@@ -76,34 +137,52 @@
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
- # CONFIG_ARCH_OMAP is not set
--# CONFIG_ARCH_VERSATILE is not set
--# CONFIG_ARCH_IMX is not set
--# CONFIG_ARCH_H720X is not set
--# CONFIG_ARCH_AAEC2000 is not set
--CONFIG_ARCH_AT91=y
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
- CONFIG_ARCH_AT91RM9200=y
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-
- #
--# AT91RM9200 Implementations
-+# AT91RM9200 Board Type
- #
-+# CONFIG_MACH_ONEARM is not set
- # CONFIG_ARCH_AT91RM9200DK is not set
- # CONFIG_MACH_AT91RM9200EK is not set
- # CONFIG_MACH_CSB337 is not set
- # CONFIG_MACH_CSB637 is not set
- # CONFIG_MACH_CARMEVA is not set
-+# CONFIG_MACH_ATEB9200 is not set
- CONFIG_MACH_KB9200=y
-+# CONFIG_MACH_KAFA is not set
-+# CONFIG_MACH_CHUB is not set
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
- #
- CONFIG_CPU_32=y
- CONFIG_CPU_ARM920T=y
--CONFIG_CPU_32v4=y
-+CONFIG_CPU_32v4T=y
- CONFIG_CPU_ABRT_EV4T=y
- CONFIG_CPU_CACHE_V4WT=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_COPY_V4WB=y
- CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-
- #
- # Processor Features
-@@ -112,24 +191,44 @@
- # CONFIG_CPU_ICACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--CONFIG_ISA_DMA_API=y
-
- #
- # PCCARD (PCMCIA/CardBus) support
- #
--# CONFIG_PCCARD is not set
-+CONFIG_PCCARD=m
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=m
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
-+
-+#
-+# PC-card bridges
-+#
-+# CONFIG_AT91_CF is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -138,8 +237,10 @@
- #
- CONFIG_ZBOOT_ROM_TEXT=0x10000000
- CONFIG_ZBOOT_ROM_BSS=0x20040000
--CONFIG_ZBOOT_ROM=y
--CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
-+# CONFIG_ZBOOT_ROM is not set
-+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -150,6 +251,7 @@
- #
- CONFIG_FPE_NWFPE=y
- # CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-
- #
- # Userspace binary formats
-@@ -165,6 +267,96 @@
- # CONFIG_PM is not set
-
- #
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+CONFIG_IP_SCTP=m
-+# CONFIG_SCTP_DBG_MSG is not set
-+# CONFIG_SCTP_DBG_OBJCNT is not set
-+# CONFIG_SCTP_HMAC_NONE is not set
-+# CONFIG_SCTP_HMAC_SHA1 is not set
-+CONFIG_SCTP_HMAC_MD5=y
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
- # Device Drivers
- #
-
-@@ -173,13 +365,95 @@
- #
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
--# CONFIG_FW_LOADER is not set
--CONFIG_DEBUG_DRIVER=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-
- #
- # Memory Technology Devices (MTD)
- #
--# CONFIG_MTD is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-
- #
- # Parallel port support
-@@ -189,6 +463,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -196,28 +471,27 @@
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
--CONFIG_BLK_DEV_NBD=y
-+# CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_UB is not set
- CONFIG_BLK_DEV_RAM=y
- CONFIG_BLK_DEV_RAM_COUNT=16
--CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_INITRD=y
--CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-
- #
--# IO Schedulers
-+# ATA/ATAPI/MFM/RLL support
- #
--CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
--CONFIG_IOSCHED_DEADLINE=y
--CONFIG_IOSCHED_CFQ=y
--# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
-+# CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
- #
-@@ -233,97 +507,61 @@
- #
- # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
- #
--# CONFIG_SCSI_MULTI_LUN is not set
--# CONFIG_SCSI_CONSTANTS is not set
--# CONFIG_SCSI_LOGGING is not set
-+CONFIG_SCSI_MULTI_LUN=y
-+CONFIG_SCSI_CONSTANTS=y
-+CONFIG_SCSI_LOGGING=y
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
--# SCSI Transport Attributes
-+# SCSI Transports
- #
--# CONFIG_SCSI_SPI_ATTRS is not set
-+CONFIG_SCSI_SPI_ATTRS=m
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-
- #
- # SCSI low-level drivers
- #
--# CONFIG_SCSI_SATA is not set
-+# CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
-
- #
--# Multi-device support (RAID and LVM)
--#
--# CONFIG_MD is not set
--
--#
--# Fusion MPT device support
-+# PCMCIA SCSI adapter support
- #
--# CONFIG_FUSION is not set
-+# CONFIG_PCMCIA_AHA152X is not set
-+# CONFIG_PCMCIA_FDOMAIN is not set
-+# CONFIG_PCMCIA_NINJA_SCSI is not set
-+# CONFIG_PCMCIA_QLOGIC is not set
-+# CONFIG_PCMCIA_SYM53C500 is not set
-
- #
--# IEEE 1394 (FireWire) support
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
- #
-+# CONFIG_ATA is not set
-
- #
--# I2O device support
-+# Multi-device support (RAID and LVM)
- #
-+# CONFIG_MD is not set
-
- #
--# Networking support
-+# Fusion MPT device support
- #
--CONFIG_NET=y
-+# CONFIG_FUSION is not set
-
- #
--# Networking options
-+# IEEE 1394 (FireWire) support
- #
--CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
--CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
--CONFIG_INET=y
--CONFIG_IP_MULTICAST=y
--# CONFIG_IP_ADVANCED_ROUTER is not set
--CONFIG_IP_FIB_HASH=y
--CONFIG_IP_PNP=y
--CONFIG_IP_PNP_DHCP=y
--# CONFIG_IP_PNP_BOOTP is not set
--# CONFIG_IP_PNP_RARP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
--# CONFIG_IP_MROUTE is not set
--# CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
--# CONFIG_INET_IPCOMP is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_IP_TCPDIAG is not set
--# CONFIG_IP_TCPDIAG_IPV6 is not set
--# CONFIG_TCP_CONG_ADVANCED is not set
--CONFIG_TCP_CONG_BIC=y
--# CONFIG_IPV6 is not set
--# CONFIG_NETFILTER is not set
--# CONFIG_BRIDGE is not set
--# CONFIG_VLAN_8021Q is not set
--# CONFIG_DECNET is not set
--# CONFIG_LLC2 is not set
--# CONFIG_IPX is not set
--# CONFIG_ATALK is not set
-
- #
--# QoS and/or fair queueing
-+# I2O device support
- #
--# CONFIG_NET_SCHED is not set
--# CONFIG_NET_CLS_ROUTE is not set
-
- #
--# Network testing
-+# Network device support
- #
--# CONFIG_NET_PKTGEN is not set
--# CONFIG_NETPOLL is not set
--# CONFIG_NET_POLL_CONTROLLER is not set
--# CONFIG_HAMRADIO is not set
--# CONFIG_IRDA is not set
--# CONFIG_BT is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-@@ -331,6 +569,11 @@
- # CONFIG_TUN is not set
-
- #
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
-@@ -357,11 +600,20 @@
- # CONFIG_NET_RADIO is not set
-
- #
-+# PCMCIA network device support
-+#
-+# CONFIG_NET_PCMCIA is not set
-+
-+#
- # Wan interfaces
- #
- # CONFIG_WAN is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-
- #
- # ISDN subsystem
-@@ -372,6 +624,7 @@
- # Input device support
- #
- CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-
- #
- # Userland interfaces
-@@ -397,9 +650,7 @@
- #
- # Hardware I/O ports
- #
--CONFIG_SERIO=y
--# CONFIG_SERIO_SERPORT is not set
--# CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -408,6 +659,7 @@
- CONFIG_VT=y
- CONFIG_VT_CONSOLE=y
- CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -420,11 +672,11 @@
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
--CONFIG_LEGACY_PTYS=y
--CONFIG_LEGACY_PTY_COUNT=256
-+# CONFIG_LEGACY_PTYS is not set
-
- #
- # IPMI
-@@ -435,21 +687,23 @@
- # Watchdog Cards
- #
- # CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
--# CONFIG_RTC is not set
--# CONFIG_AT91RM9200_RTC is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
-
- #
--# Ftape, the floppy tape device driver
-+# PCMCIA character devices
- #
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
- # CONFIG_RAW_DRIVER is not set
-
- #
- # TPM devices
- #
--# CONFIG_AT91_SPI is not set
-+# CONFIG_TCG_TPM is not set
-
- #
- # I2C support
-@@ -457,10 +711,50 @@
- # CONFIG_I2C is not set
-
- #
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_ABITUGURU is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_PC87427 is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+CONFIG_HWMON_DEBUG_CHIP=y
-+
-+#
- # Misc devices
- #
-
- #
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
-@@ -469,17 +763,57 @@
- # Digital Video Broadcasting Devices
- #
- # CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-
- #
- # Graphics support
- #
--# CONFIG_FB is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+# CONFIG_LCD_CLASS_DEVICE is not set
-+CONFIG_BACKLIGHT_KB920x=y
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+CONFIG_FB_MODE_HELPERS=y
-+CONFIG_FB_TILEBLITTING=y
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+CONFIG_FB_S1D15605=y
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_VIRTUAL is not set
-
- #
- # Console display driver support
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+# CONFIG_FONT_8x16 is not set
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+CONFIG_FONT_MINI_4x6=y
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_10x18 is not set
-+
-+#
-+# Logo configuration
-+#
-+# CONFIG_LOGO is not set
-
- #
- # Sound
-@@ -487,82 +821,98 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
- CONFIG_USB=y
--CONFIG_USB_DEBUG=y
-+# CONFIG_USB_DEBUG is not set
-
- #
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-
- #
- # USB Host Controller Drivers
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
- #
- # USB Device Class drivers
- #
--# CONFIG_USB_BLUETOOTH_TTY is not set
- # CONFIG_USB_ACM is not set
- # CONFIG_USB_PRINTER is not set
-
- #
--# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
- #
- CONFIG_USB_STORAGE=y
--CONFIG_USB_STORAGE_DEBUG=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
- # CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-
- #
- # USB Input Devices
- #
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
- # CONFIG_USB_AIPTEK is not set
- # CONFIG_USB_WACOM is not set
- # CONFIG_USB_ACECAD is not set
- # CONFIG_USB_KBTAB is not set
- # CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_MTOUCH is not set
--# CONFIG_USB_ITMTOUCH is not set
--# CONFIG_USB_EGALAX is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
- # CONFIG_USB_XPAD is not set
- # CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
- #
-+# CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
-
- #
--# USB Multimedia devices
--#
--# CONFIG_USB_DABUSB is not set
--
--#
--# Video4Linux support is needed for USB Multimedia device support
--#
--
--#
- # USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
- # CONFIG_USB_KAWETH is not set
- # CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
- # CONFIG_USB_USBNET is not set
- # CONFIG_USB_MON is not set
-
-@@ -580,12 +930,23 @@
- #
- # CONFIG_USB_EMI62 is not set
- # CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGETKIT is not set
--# CONFIG_USB_PHIDGETSERVO is not set
-+# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-
- #
- # USB DSL modem support
-@@ -599,36 +960,51 @@
- #
- # MMC/SD Card support
- #
--# CONFIG_MMC is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_AT91=y
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-
- #
- # File systems
- #
- CONFIG_EXT2_FS=y
- CONFIG_EXT2_FS_XATTR=y
--# CONFIG_EXT2_FS_POSIX_ACL is not set
--# CONFIG_EXT2_FS_SECURITY is not set
-+CONFIG_EXT2_FS_POSIX_ACL=y
-+CONFIG_EXT2_FS_SECURITY=y
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
- CONFIG_EXT3_FS_XATTR=y
--# CONFIG_EXT3_FS_POSIX_ACL is not set
--# CONFIG_EXT3_FS_SECURITY is not set
-+CONFIG_EXT3_FS_POSIX_ACL=y
-+CONFIG_EXT3_FS_SECURITY=y
-+# CONFIG_EXT4DEV_FS is not set
- CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--
--#
--# XFS support
--#
-+CONFIG_FS_POSIX_ACL=y
- # CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_QUOTA is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
- CONFIG_DNOTIFY=y
--CONFIG_AUTOFS_FS=y
-+# CONFIG_AUTOFS_FS is not set
- CONFIG_AUTOFS4_FS=y
-+# CONFIG_FUSE_FS is not set
-
- #
- # CD-ROM/DVD Filesystems
-@@ -643,25 +1019,40 @@
- CONFIG_MSDOS_FS=y
- CONFIG_VFAT_FS=y
- CONFIG_FAT_DEFAULT_CODEPAGE=437
--CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
- # CONFIG_NTFS_FS is not set
-
- #
- # Pseudo filesystems
- #
- CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
- CONFIG_SYSFS=y
--CONFIG_DEVPTS_FS_XATTR=y
--# CONFIG_DEVPTS_FS_SECURITY is not set
- CONFIG_TMPFS=y
--# CONFIG_TMPFS_XATTR is not set
-+# CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
- #
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
- # CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
- # CONFIG_HPFS_FS is not set
-@@ -675,16 +1066,23 @@
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
-+CONFIG_NFS_V4=y
-+# CONFIG_NFS_DIRECTIO is not set
- # CONFIG_NFSD is not set
- CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
- # CONFIG_SMB_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-
- #
- # Partition Types
-@@ -734,26 +1132,51 @@
- # CONFIG_NLS_ISO8859_15 is not set
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
--# CONFIG_NLS_UTF8 is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
--# CONFIG_MAGIC_SYSRQ is not set
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
--# CONFIG_DEBUG_SPINLOCK is not set
--# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+CONFIG_DEBUG_SPINLOCK=y
-+# CONFIG_DEBUG_MUTEXES is not set
-+CONFIG_DEBUG_SPINLOCK_SLEEP=y
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_DEBUG_USER=y
--CONFIG_DEBUG_ERRORS=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
- # CONFIG_DEBUG_ICEDCC is not set
-
-@@ -766,7 +1189,43 @@
- #
- # Cryptographic options
- #
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-
- #
- # Hardware crypto devices
-@@ -775,6 +1234,14 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Kconfig linux-2.6-stable/arch/arm/mach-at91/Kconfig
---- linux-2.6.21/arch/arm/mach-at91/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/Kconfig Wed May 9 10:20:54 2007
-@@ -17,6 +17,9 @@
- config ARCH_AT91SAM9263
- bool "AT91SAM9263"
-
-+config ARCH_AT91SAM9RL
-+ bool "AT91SAM9RL"
-+
- endchoice
-
- # ----------------------------------------------------------
-@@ -87,6 +90,12 @@
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-+config MACH_CHUB
-+ bool "Promwad Chub board"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Promwad's Chub board.
-+
- endif
-
- # ----------------------------------------------------------
-@@ -111,6 +120,13 @@
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-+config MACH_CAM60
-+ bool "KwikByte CAM60 board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
-+ <http://www.kwikbyte.com>
-+
- endif
-
- # ----------------------------------------------------------
-@@ -145,6 +161,20 @@
-
- # ----------------------------------------------------------
-
-+if ARCH_AT91SAM9RL
-+
-+comment "AT91SAM9RL Board Type"
-+
-+config MACH_AT91SAM9RLEK
-+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-+ depends on ARCH_AT91SAM9RL
-+ help
-+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-+
-+endif
-+
-+# ----------------------------------------------------------
-+
- comment "AT91 Board Options"
-
- config MTD_AT91_DATAFLASH_CARD
-@@ -160,6 +190,20 @@
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
-+config CSB300_WAKE_SW0
-+ bool "CSB300 SW0 irq0 wakeup"
-+ depends on MACH_CSB337 && PM
-+ help
-+ If you have a CSB300 connected to your CSB337, this lets
-+ SW0 serve as a wakeup button. It uses IRQ0.
-+
-+config CSB300_WAKE_SW1
-+ bool "CSB300 SW1 gpio wakeup"
-+ depends on MACH_CSB337 && PM
-+ help
-+ If you have a CSB300 connected to your CSB337, this lets
-+ SW1 serve as a wakeup button. It uses GPIO.
-+
- # ----------------------------------------------------------
-
- comment "AT91 Feature Selections"
-@@ -170,6 +214,20 @@
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-+config ATMEL_TCLIB
-+ bool "Timer/Counter Library"
-+ help
-+ Select this if you want a library to allocate the Timer/Counter
-+ blocks found on many Atmel processors. This facilitates using
-+ these modules despite processor differences.
-+
-+config AT91_SLOW_CLOCK
-+ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
-+ depends on PM && EXPERIMENTAL
-+ help
-+ Select this if you wish to put the CPU into slow clock mode
-+ while in the "Suspend to RAM" state, to save more power.
-+
- endmenu
-
- endif
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Makefile linux-2.6-stable/arch/arm/mach-at91/Makefile
---- linux-2.6.21/arch/arm/mach-at91/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/Makefile Wed May 9 12:37:19 2007
-@@ -8,12 +8,15 @@
- obj- :=
-
- obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
-+obj-$(CONFIG_ATMEL_TCLIB) += tclib.o
-
- # CPU-specific support
- obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
-+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
-
- # AT91RM9200 board-specific support
- obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-@@ -25,9 +28,11 @@
- obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
- obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
- obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-+obj-$(CONFIG_MACH_CHUB) += board-chub.o
-
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-+obj-$(CONFIG_MACH_CAM60) += board-cam60.o
-
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-@@ -35,9 +40,13 @@
- # AT91SAM9263 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-
-+# AT91SAM9RL board-specific support
-+obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-+
- # LEDs support
- led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
- led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
-+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
- led-$(CONFIG_MACH_CSB337) += leds.o
- led-$(CONFIG_MACH_CSB637) += leds.o
- led-$(CONFIG_MACH_KB9200) += leds.o
-@@ -45,7 +54,7 @@
- obj-$(CONFIG_LEDS) += $(led-y)
-
- # VGA support
--#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-
-
- ifeq ($(CONFIG_PM_DEBUG),y)
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c
---- linux-2.6.21/arch/arm/mach-at91/at91rm9200.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c Tue May 8 12:13:30 2007
-@@ -117,6 +117,21 @@
- .pmc_mask = 1 << AT91RM9200_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc0_clk = {
-+ .name = "ssc0_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_SSC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+ .name = "ssc1_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_SSC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc2_clk = {
-+ .name = "ssc2_clk",
-+ .pmc_mask = 1 << AT91RM9200_ID_SSC2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC0,
-@@ -161,7 +176,9 @@
- &udc_clk,
- &twi_clk,
- &spi_clk,
-- // ssc 0 .. ssc2
-+ &ssc0_clk,
-+ &ssc1_clk,
-+ &ssc2_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
-@@ -250,6 +267,33 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91rm9200_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91RM9200_BASE_TCB0,
-+ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ },
-+ [1] = {
-+ .physaddr = AT91RM9200_BASE_TCB1,
-+ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 },
-+ .clk = { &tc3_clk, &tc4_clk, &tc5_clk },
-+ },
-+};
-+
-+#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks))
-+
-+#else
-+#define at91rm9200_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91RM9200 processor initialization
- * -------------------------------------------------------------------- */
- void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-@@ -271,6 +315,9 @@
-
- /* Initialize GPIO subsystem */
- at91_gpio_init(at91rm9200_gpio, banks);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91rm9200_tc_init();
- }
-
-
-@@ -284,28 +331,28 @@
- static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-- 0, /* Parallel IO Controller D */
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-- 6, /* USART 3 */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller D */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
-+ 5, /* USART 3 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 5, /* Serial Synchronous Controller 2 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* Ethernet MAC */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c Tue May 8 12:13:30 2007
-@@ -480,7 +480,18 @@
- * SPI
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
-+#define SPI_DEVNAME "atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
- static u64 spi_dmamask = 0xffffffffUL;
-
- static struct resource spi_resources[] = {
-@@ -497,7 +508,7 @@
- };
-
- static struct platform_device at91rm9200_spi_device = {
-- .name = "at91_spi",
-+ .name = SPI_DEVNAME,
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-@@ -606,6 +617,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9260.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c Tue May 8 12:13:30 2007
-@@ -119,6 +119,11 @@
- .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc_clk = {
-+ .name = "ssc_clk",
-+ .pmc_mask = 1 << AT91SAM9260_ID_SSC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC0,
-@@ -193,7 +198,7 @@
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
-- // ssc
-+ &ssc_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
-@@ -264,6 +269,33 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9260_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9260_BASE_TCB0,
-+ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ },
-+ [1] = {
-+ .physaddr = AT91SAM9260_BASE_TCB1,
-+ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 },
-+ .clk = { &tc3_clk, &tc4_clk, &tc5_clk },
-+ },
-+};
-+
-+#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks))
-+
-+#else
-+#define at91sam9260_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9260 processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -310,6 +342,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9260_gpio, 3);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9260_tc_init();
- }
-
- /* --------------------------------------------------------------------
-@@ -322,30 +357,30 @@
- static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
- 0, /* Analog-to-Digital Converter */
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller */
- 0,
- 0,
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
-- 6, /* USART 3 */
-- 6, /* USART 4 */
-- 6, /* USART 5 */
-+ 5, /* USART 3 */
-+ 5, /* USART 4 */
-+ 5, /* USART 5 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c Tue May 8 12:13:30 2007
-@@ -527,6 +527,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9261.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c Tue May 8 12:13:30 2007
-@@ -97,6 +97,21 @@
- .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc0_clk = {
-+ .name = "ssc0_clk",
-+ .pmc_mask = 1 << AT91SAM9261_ID_SSC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+ .name = "ssc1_clk",
-+ .pmc_mask = 1 << AT91SAM9261_ID_SSC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc2_clk = {
-+ .name = "ssc2_clk",
-+ .pmc_mask = 1 << AT91SAM9261_ID_SSC2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_TC0,
-@@ -135,7 +150,9 @@
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
-- // ssc 0 .. ssc2
-+ &ssc0_clk,
-+ &ssc1_clk,
-+ &ssc2_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
-@@ -230,6 +247,28 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9261_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9261_BASE_TCB0,
-+ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ }
-+};
-+
-+#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks))
-+
-+#else
-+#define at91sam9261_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9261 processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -250,6 +289,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9261_gpio, 3);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9261_tc_init();
- }
-
- /* --------------------------------------------------------------------
-@@ -262,25 +304,25 @@
- static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
- 0,
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 5, /* Serial Synchronous Controller 2 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* LCD Controller */
- 0,
- 0,
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c Tue May 8 12:56:33 2007
-@@ -14,6 +14,9 @@
- #include <asm/mach/map.h>
-
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -430,9 +433,9 @@
- * LCD Controller
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
- static u64 lcdc_dmamask = 0xffffffffUL;
--static struct at91fb_info lcdc_data;
-+static struct atmel_lcdfb_info lcdc_data;
-
- static struct resource lcdc_resources[] = {
- [0] = {
-@@ -455,7 +458,7 @@
- };
-
- static struct platform_device at91_lcdc_device = {
-- .name = "at91-fb",
-+ .name = "atmel_lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
-@@ -466,7 +469,7 @@
- .num_resources = ARRAY_SIZE(lcdc_resources),
- };
-
--void __init at91_add_device_lcdc(struct at91fb_info *data)
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
- {
- if (!data) {
- return;
-@@ -499,7 +502,7 @@
- platform_device_register(&at91_lcdc_device);
- }
- #else
--void __init at91_add_device_lcdc(struct at91fb_info *data) {}
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
- #endif
-
-
-@@ -525,6 +528,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9263.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c Tue May 8 12:13:30 2007
-@@ -87,6 +87,11 @@
- .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk can_clk = {
-+ .name = "can_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_CAN,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_TWI,
-@@ -102,16 +107,46 @@
- .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc0_clk = {
-+ .name = "ssc0_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_SSC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+ .name = "ssc1_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_SSC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ac97_clk = {
-+ .name = "ac97_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_AC97C,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk pwmc_clk = {
-+ .name = "pwmc_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_PWMC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk macb_clk = {
- .name = "macb_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
- };
-+static struct clk dma_clk = {
-+ .name = "dma_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_DMA,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twodge_clk = {
-+ .name = "2dge_clk",
-+ .pmc_mask = 1 << AT91SAM9263_ID_2DGE,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
- static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_UDP,
-@@ -142,20 +177,21 @@
- &usart2_clk,
- &mmc0_clk,
- &mmc1_clk,
-- // can
-+ &can_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
-- // ssc0 .. ssc1
-- // ac97
-+ &ssc0_clk,
-+ &ssc1_clk,
-+ &ac97_clk,
- &tcb_clk,
-- // pwmc
-+ &pwmc_clk,
- &macb_clk,
-- // 2dge
-+ &twodge_clk,
- &udc_clk,
- &isi_clk,
- &lcdc_clk,
-- // dma
-+ &dma_clk,
- &ohci_clk,
- // irq0 .. irq1
- };
-@@ -237,6 +273,28 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9263_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9263_BASE_TCB0,
-+ .irq = { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB },
-+ .clk = { &tcb_clk, &tcb_clk, &tcb_clk },
-+ }
-+};
-+
-+#define at91sam9263_tc_init() atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks))
-+
-+#else
-+#define at91sam9263_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9263 processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -256,6 +314,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9263_gpio, 5);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9263_tc_init();
- }
-
- /* --------------------------------------------------------------------
-@@ -268,34 +329,34 @@
- static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C, D and E */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C, D and E */
- 0,
- 0,
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
-- 4, /* CAN */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 6, /* AC97 Controller */
-+ 3, /* CAN */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0,
- 0, /* 2D Graphic Engine */
-- 3, /* USB Device Port */
-+ 2, /* USB Device Port */
- 0, /* Image Sensor Interface */
- 3, /* LDC Controller */
- 0, /* DMA Controller */
- 0,
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
- };
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c Thu May 10 12:23:46 2007
-@@ -13,6 +13,9 @@
- #include <asm/mach/map.h>
-
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -573,6 +576,180 @@
-
-
- /* --------------------------------------------------------------------
-+ * AC97
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
-+static u64 ac97_dmamask = 0xffffffffUL;
-+static struct atmel_ac97_data ac97_data;
-+
-+static struct resource ac97_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_AC97C,
-+ .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_AC97C,
-+ .end = AT91SAM9263_ID_AC97C,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_ac97_device = {
-+ .name = "ac97c",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &ac97_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &ac97_data,
-+ },
-+ .resource = ac97_resources,
-+ .num_resources = ARRAY_SIZE(ac97_resources),
-+};
-+
-+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */
-+ at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */
-+ at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */
-+ at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
-+
-+ /* reset */
-+ if (data->reset_pin)
-+ at91_set_gpio_output(data->reset_pin, 0);
-+
-+ ac97_data = *ek_data;
-+ platform_device_register(&at91sam9263_ac97_device);
-+}
-+#else
-+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * Image Sensor Interface
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-+
-+struct resource isi_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_ISI,
-+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_ISI,
-+ .end = AT91SAM9263_ID_ISI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_isi_device = {
-+ .name = "at91_isi",
-+ .id = -1,
-+ .resource = isi_resources,
-+ .num_resources = ARRAY_SIZE(isi_resources),
-+};
-+
-+void __init at91_add_device_isi(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
-+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
-+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
-+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
-+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
-+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
-+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
-+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
-+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
-+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
-+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
-+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
-+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
-+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
-+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
-+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-+}
-+#else
-+void __init at91_add_device_isi(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * LCD Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static u64 lcdc_dmamask = 0xffffffffUL;
-+static struct atmel_lcdfb_info lcdc_data;
-+
-+static struct resource lcdc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_LCDC_BASE,
-+ .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_LCDC,
-+ .end = AT91SAM9263_ID_LCDC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91_lcdc_device = {
-+ .name = "atmel_lcdfb",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &lcdc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &lcdc_data,
-+ },
-+ .resource = lcdc_resources,
-+ .num_resources = ARRAY_SIZE(lcdc_resources),
-+};
-+
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-+{
-+ if (!data)
-+ return;
-+
-+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
-+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
-+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
-+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
-+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
-+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
-+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
-+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
-+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
-+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
-+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
-+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
-+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
-+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
-+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
-+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
-+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
-+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
-+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
-+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
-+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
-+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-+
-+ lcdc_data = *data;
-+ platform_device_register(&at91_lcdc_device);
-+}
-+#else
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-@@ -594,6 +771,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c Fri May 11 15:48:14 2007
-@@ -0,0 +1,366 @@
-+/*
-+ * arch/arm/mach-at91/at91sam9rl.c
-+ *
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/at91sam9rl.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+
-+#include "generic.h"
-+#include "clock.h"
-+
-+static struct map_desc at91sam9rl_io_desc[] __initdata = {
-+ {
-+ .virtual = AT91_VA_BASE_SYS,
-+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
-+ .length = SZ_16K,
-+ .type = MT_DEVICE,
-+ },
-+};
-+
-+static struct map_desc at91sam9rl_sram_desc[] __initdata = {
-+ {
-+ .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
-+ .type = MT_DEVICE,
-+ }
-+};
-+
-+/* --------------------------------------------------------------------
-+ * Clocks
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The peripheral clocks.
-+ */
-+static struct clk pioA_clk = {
-+ .name = "pioA_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioB_clk = {
-+ .name = "pioB_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioC_clk = {
-+ .name = "pioC_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioD_clk = {
-+ .name = "pioD_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart0_clk = {
-+ .name = "usart0_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_US0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart1_clk = {
-+ .name = "usart1_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_US1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart2_clk = {
-+ .name = "usart2_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_US2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart3_clk = {
-+ .name = "usart3_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_US3,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mmc_clk = {
-+ .name = "mci_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_MCI,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twi0_clk = {
-+ .name = "twi0_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twi1_clk = {
-+ .name = "twi1_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk spi_clk = {
-+ .name = "spi_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_SPI,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc0_clk = {
-+ .name = "ssc0_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+ .name = "ssc1_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc0_clk = {
-+ .name = "tc0_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_TC0,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc1_clk = {
-+ .name = "tc1_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_TC1,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc2_clk = {
-+ .name = "tc2_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_TC2,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pwmc_clk = {
-+ .name = "pwmc_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tsc_clk = {
-+ .name = "tsc_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_TSC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk dma_clk = {
-+ .name = "dma_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_DMA,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk udphs_clk = {
-+ .name = "udphs_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk lcdc_clk = {
-+ .name = "lcdc_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ac97_clk = {
-+ .name = "ac97_clk",
-+ .pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
-+ .type = CLK_TYPE_PERIPHERAL,
-+};
-+
-+static struct clk *periph_clocks[] __initdata = {
-+ &pioA_clk,
-+ &pioB_clk,
-+ &pioC_clk,
-+ &pioD_clk,
-+ &usart0_clk,
-+ &usart1_clk,
-+ &usart2_clk,
-+ &usart3_clk,
-+ &mmc_clk,
-+ &twi0_clk,
-+ &twi1_clk,
-+ &spi_clk,
-+ &ssc0_clk,
-+ &ssc1_clk,
-+ &tc0_clk,
-+ &tc1_clk,
-+ &tc2_clk,
-+ &pwmc_clk,
-+ &tsc_clk,
-+ &dma_clk,
-+ &udphs_clk,
-+ &lcdc_clk,
-+ &ac97_clk,
-+ // irq0
-+};
-+
-+/*
-+ * The two programmable clocks.
-+ * You must configure pin multiplexing to bring these signals out.
-+ */
-+static struct clk pck0 = {
-+ .name = "pck0",
-+ .pmc_mask = AT91_PMC_PCK0,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 0,
-+};
-+static struct clk pck1 = {
-+ .name = "pck1",
-+ .pmc_mask = AT91_PMC_PCK1,
-+ .type = CLK_TYPE_PROGRAMMABLE,
-+ .id = 1,
-+};
-+
-+static void __init at91sam9rl_register_clocks(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-+ clk_register(periph_clocks[i]);
-+
-+ clk_register(&pck0);
-+ clk_register(&pck1);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * GPIO
-+ * -------------------------------------------------------------------- */
-+
-+static struct at91_gpio_bank at91sam9rl_gpio[] = {
-+ {
-+ .id = AT91SAM9RL_ID_PIOA,
-+ .offset = AT91_PIOA,
-+ .clock = &pioA_clk,
-+ }, {
-+ .id = AT91SAM9RL_ID_PIOB,
-+ .offset = AT91_PIOB,
-+ .clock = &pioB_clk,
-+ }, {
-+ .id = AT91SAM9RL_ID_PIOC,
-+ .offset = AT91_PIOC,
-+ .clock = &pioC_clk,
-+ }, {
-+ .id = AT91SAM9RL_ID_PIOD,
-+ .offset = AT91_PIOD,
-+ .clock = &pioD_clk,
-+ }
-+};
-+
-+static void at91sam9rl_reset(void)
-+{
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9rl_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9RL_BASE_TCB0,
-+ .irq = { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ }
-+};
-+
-+#define at91sam9rl_tc_init() atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks))
-+
-+#else
-+#define at91sam9rl_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * AT91SAM9RL processor initialization
-+ * -------------------------------------------------------------------- */
-+
-+void __init at91sam9rl_initialize(unsigned long main_clock)
-+{
-+ unsigned long cidr, sram_size;
-+
-+ /* Map peripherals */
-+ iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
-+
-+ cidr = at91_sys_read(AT91_DBGU_CIDR);
-+
-+ switch (cidr & AT91_CIDR_SRAMSIZ) {
-+ case AT91_CIDR_SRAMSIZ_32K:
-+ sram_size = 2 * SZ_16K;
-+ break;
-+ case AT91_CIDR_SRAMSIZ_16K:
-+ default:
-+ sram_size = SZ_16K;
-+ }
-+
-+ at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
-+ at91sam9rl_sram_desc->length = sram_size;
-+
-+ /* Map SRAM */
-+ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
-+
-+ at91_arch_reset = at91sam9rl_reset;
-+ at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
-+
-+ /* Init clock subsystem */
-+ at91_clock_init(main_clock);
-+
-+ /* Register the processor-specific clocks */
-+ at91sam9rl_register_clocks();
-+
-+ /* Register GPIO subsystem */
-+ at91_gpio_init(at91sam9rl_gpio, 4);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9rl_tc_init();
-+}
-+
-+/* --------------------------------------------------------------------
-+ * Interrupt initialization
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The default interrupt priority levels (0 = lowest, 7 = highest).
-+ */
-+static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
-+ 7, /* Advanced Interrupt Controller */
-+ 7, /* System Peripherals */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller D */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
-+ 5, /* USART 3 */
-+ 0, /* Multimedia Card Interface */
-+ 6, /* Two-Wire Interface 0 */
-+ 6, /* Two-Wire Interface 1 */
-+ 5, /* Serial Peripheral Interface */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 0, /* Timer Counter 0 */
-+ 0, /* Timer Counter 1 */
-+ 0, /* Timer Counter 2 */
-+ 0,
-+ 0, /* Touch Screen Controller */
-+ 0, /* DMA Controller */
-+ 2, /* USB Device High speed port */
-+ 2, /* LCD Controller */
-+ 6, /* AC97 Controller */
-+ 0,
-+ 0,
-+ 0,
-+ 0,
-+ 0,
-+ 0,
-+ 0, /* Advanced Interrupt Controller */
-+};
-+
-+void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-+{
-+ if (!priority)
-+ priority = at91sam9rl_default_irq_priority;
-+
-+ /* Initialize the AIC interrupt controller */
-+ at91_aic_init(priority);
-+
-+ /* Enable GPIO interrupts */
-+ at91_gpio_irq_setup();
-+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c Fri May 11 16:03:25 2007
-@@ -0,0 +1,660 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam9rl.h>
-+#include <asm/arch/at91sam9rl_matrix.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+#define SZ_512 0x00000200
-+#define SZ_256 0x00000100
-+#define SZ_16 0x00000010
-+
-+
-+/* --------------------------------------------------------------------
-+ * MMC / SD
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-+static u64 mmc_dmamask = 0xffffffffUL;
-+static struct at91_mmc_data mmc_data;
-+
-+static struct resource mmc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_MCI,
-+ .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_MCI,
-+ .end = AT91SAM9RL_ID_MCI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_mmc_device = {
-+ .name = "at91_mci",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &mmc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &mmc_data,
-+ },
-+ .resource = mmc_resources,
-+ .num_resources = ARRAY_SIZE(mmc_resources),
-+};
-+
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-+{
-+ if (!data)
-+ return;
-+
-+ /* input/irq */
-+ if (data->det_pin) {
-+ at91_set_gpio_input(data->det_pin, 1);
-+ at91_set_deglitch(data->det_pin, 1);
-+ }
-+ if (data->wp_pin)
-+ at91_set_gpio_input(data->wp_pin, 1);
-+ if (data->vcc_pin)
-+ at91_set_gpio_output(data->vcc_pin, 0);
-+
-+ /* CLK */
-+ at91_set_A_periph(AT91_PIN_PA2, 0);
-+
-+ /* CMD */
-+ at91_set_A_periph(AT91_PIN_PA1, 1);
-+
-+ /* DAT0, maybe DAT1..DAT3 */
-+ at91_set_A_periph(AT91_PIN_PA0, 1);
-+ if (data->wire4) {
-+ at91_set_A_periph(AT91_PIN_PA3, 1);
-+ at91_set_A_periph(AT91_PIN_PA4, 1);
-+ at91_set_A_periph(AT91_PIN_PA5, 1);
-+ }
-+
-+ mmc_data = *data;
-+ platform_device_register(&at91sam9rl_mmc_device);
-+}
-+#else
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * NAND / SmartMedia
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-+static struct at91_nand_data nand_data;
-+
-+#define NAND_BASE AT91_CHIPSELECT_3
-+
-+static struct resource nand_resources[] = {
-+ {
-+ .start = NAND_BASE,
-+ .end = NAND_BASE + SZ_256M - 1,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device at91_nand_device = {
-+ .name = "at91_nand",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nand_data,
-+ },
-+ .resource = nand_resources,
-+ .num_resources = ARRAY_SIZE(nand_resources),
-+};
-+
-+void __init at91_add_device_nand(struct at91_nand_data *data)
-+{
-+ unsigned long csa;
-+
-+ if (!data)
-+ return;
-+
-+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-+
-+ /* set the bus interface characteristics */
-+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-+
-+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
-+
-+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-+
-+ at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-+
-+ /* enable pin */
-+ if (data->enable_pin)
-+ at91_set_gpio_output(data->enable_pin, 1);
-+
-+ /* ready/busy pin */
-+ if (data->rdy_pin)
-+ at91_set_gpio_input(data->rdy_pin, 1);
-+
-+ /* card detect pin */
-+ if (data->det_pin)
-+ at91_set_gpio_input(data->det_pin, 1);
-+
-+ at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
-+ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
-+
-+ nand_data = *data;
-+ platform_device_register(&at91_nand_device);
-+}
-+
-+#else
-+void __init at91_add_device_nand(struct at91_nand_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * TWI (i2c)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-+
-+static struct resource twi_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_TWI0,
-+ .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_TWI0,
-+ .end = AT91SAM9RL_ID_TWI0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_twi_device = {
-+ .name = "at91_i2c",
-+ .id = -1,
-+ .resource = twi_resources,
-+ .num_resources = ARRAY_SIZE(twi_resources),
-+};
-+
-+void __init at91_add_device_i2c(void)
-+{
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PA23, 1);
-+
-+ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PA24, 1);
-+
-+ platform_device_register(&at91sam9rl_twi_device);
-+}
-+#else
-+void __init at91_add_device_i2c(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * SPI
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-+static u64 spi_dmamask = 0xffffffffUL;
-+
-+static struct resource spi_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_SPI,
-+ .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_SPI,
-+ .end = AT91SAM9RL_ID_SPI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9rl_spi_device = {
-+ .name = "atmel_spi",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &spi_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = spi_resources,
-+ .num_resources = ARRAY_SIZE(spi_resources),
-+};
-+
-+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
-+
-+
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-+{
-+ int i;
-+ unsigned long cs_pin;
-+
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */
-+ at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */
-+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */
-+
-+ /* Enable SPI chip-selects */
-+ for (i = 0; i < nr_devices; i++) {
-+ if (devices[i].controller_data)
-+ cs_pin = (unsigned long) devices[i].controller_data;
-+ else
-+ cs_pin = spi_standard_cs[devices[i].chip_select];
-+
-+ /* enable chip-select pin */
-+ at91_set_gpio_output(cs_pin, 1);
-+
-+ /* pass chip-select pin to driver */
-+ devices[i].controller_data = (void *) cs_pin;
-+ }
-+
-+ spi_register_board_info(devices, nr_devices);
-+ platform_device_register(&at91sam9rl_spi_device);
-+}
-+#else
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * LCD Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static u64 lcdc_dmamask = 0xffffffffUL;
-+static struct atmel_lcdfb_info lcdc_data;
-+
-+static struct resource lcdc_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_LCDC_BASE,
-+ .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_LCDC,
-+ .end = AT91SAM9RL_ID_LCDC,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+#if defined(CONFIG_FB_INTSRAM)
-+ [2] = {
-+ .start = AT91SAM9RL_SRAM_BASE,
-+ .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+#endif
-+};
-+
-+static struct platform_device at91_lcdc_device = {
-+ .name = "atmel_lcdfb",
-+ .id = 0,
-+ .dev = {
-+ .dma_mask = &lcdc_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &lcdc_data,
-+ },
-+ .resource = lcdc_resources,
-+ .num_resources = ARRAY_SIZE(lcdc_resources),
-+};
-+
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-+{
-+ if (!data) {
-+ return;
-+ }
-+
-+#warning "Check this"
-+ at91_set_B_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
-+ at91_set_B_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
-+ at91_set_B_periph(AT91_PIN_PC7, 0); /* LCDDEN */
-+ at91_set_B_periph(AT91_PIN_PC3, 0); /* LCDCC */
-+ at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
-+ at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
-+ at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
-+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
-+ at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
-+ at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
-+ at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
-+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
-+ at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
-+ at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
-+ at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
-+ at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
-+ at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
-+ at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
-+ at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
-+ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-+
-+ lcdc_data = *data;
-+ platform_device_register(&at91_lcdc_device);
-+}
-+#else
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+u8 at91_leds_cpu;
-+u8 at91_leds_timer;
-+
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+ /* Enable GPIO to access the LEDs */
-+ at91_set_gpio_output(cpu_led, 1);
-+ at91_set_gpio_output(timer_led, 1);
-+
-+ at91_leds_cpu = cpu_led;
-+ at91_leds_timer = timer_led;
-+}
-+#else
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-+
-+
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ * UART
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SERIAL_ATMEL)
-+static struct resource dbgu_resources[] = {
-+ [0] = {
-+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
-+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91_ID_SYS,
-+ .end = AT91_ID_SYS,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data dbgu_data = {
-+ .use_dma_tx = 0,
-+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-+};
-+
-+static struct platform_device at91sam9rl_dbgu_device = {
-+ .name = "atmel_usart",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &dbgu_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = dbgu_resources,
-+ .num_resources = ARRAY_SIZE(dbgu_resources),
-+};
-+
-+static inline void configure_dbgu_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
-+ at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
-+}
-+
-+static struct resource uart0_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_US0,
-+ .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_US0,
-+ .end = AT91SAM9RL_ID_US0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart0_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart0_device = {
-+ .name = "atmel_usart",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &uart0_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart0_resources,
-+ .num_resources = ARRAY_SIZE(uart0_resources),
-+};
-+
-+static inline void configure_usart0_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
-+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
-+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
-+}
-+
-+static struct resource uart1_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_US1,
-+ .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_US1,
-+ .end = AT91SAM9RL_ID_US1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart1_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart1_device = {
-+ .name = "atmel_usart",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &uart1_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart1_resources,
-+ .num_resources = ARRAY_SIZE(uart1_resources),
-+};
-+
-+static inline void configure_usart1_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
-+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
-+}
-+
-+static struct resource uart2_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_US2,
-+ .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_US2,
-+ .end = AT91SAM9RL_ID_US2,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart2_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart2_device = {
-+ .name = "atmel_usart",
-+ .id = 3,
-+ .dev = {
-+ .platform_data = &uart2_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart2_resources,
-+ .num_resources = ARRAY_SIZE(uart2_resources),
-+};
-+
-+static inline void configure_usart2_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
-+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
-+}
-+
-+static struct resource uart3_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9RL_BASE_US3,
-+ .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9RL_ID_US3,
-+ .end = AT91SAM9RL_ID_US3,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct atmel_uart_data uart3_data = {
-+ .use_dma_tx = 1,
-+ .use_dma_rx = 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart3_device = {
-+ .name = "atmel_usart",
-+ .id = 4,
-+ .dev = {
-+ .platform_data = &uart3_data,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .resource = uart3_resources,
-+ .num_resources = ARRAY_SIZE(uart3_resources),
-+};
-+
-+static inline void configure_usart3_pins(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
-+ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
-+}
-+
-+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-+struct platform_device *atmel_default_console_device; /* the serial console device */
-+
-+void __init at91_init_serial(struct at91_uart_config *config)
-+{
-+ int i;
-+
-+ /* Fill in list of supported UARTs */
-+ for (i = 0; i < config->nr_tty; i++) {
-+ switch (config->tty_map[i]) {
-+ case 0:
-+ configure_usart0_pins();
-+ at91_uarts[i] = &at91sam9rl_uart0_device;
-+ at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
-+ break;
-+ case 1:
-+ configure_usart1_pins();
-+ at91_uarts[i] = &at91sam9rl_uart1_device;
-+ at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
-+ break;
-+ case 2:
-+ configure_usart2_pins();
-+ at91_uarts[i] = &at91sam9rl_uart2_device;
-+ at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
-+ break;
-+ case 3:
-+ configure_usart3_pins();
-+ at91_uarts[i] = &at91sam9rl_uart3_device;
-+ at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
-+ break;
-+ case 4:
-+ configure_dbgu_pins();
-+ at91_uarts[i] = &at91sam9rl_dbgu_device;
-+ at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
-+ break;
-+ default:
-+ continue;
-+ }
-+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
-+ }
-+
-+ /* Set serial console device */
-+ if (config->console_tty < ATMEL_MAX_UART)
-+ atmel_default_console_device = at91_uarts[config->console_tty];
-+ if (!atmel_default_console_device)
-+ printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
-+void __init at91_add_device_serial(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < ATMEL_MAX_UART; i++) {
-+ if (at91_uarts[i])
-+ platform_device_register(at91_uarts[i]);
-+ }
-+}
-+#else
-+void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_add_device_serial(void) {}
-+#endif
-+
-+
-+/* -------------------------------------------------------------------- */
-+
-+/*
-+ * These devices are always present and don't need any board-specific
-+ * setup.
-+ */
-+static int __init at91_add_standard_devices(void)
-+{
-+ return 0;
-+}
-+
-+arch_initcall(at91_add_standard_devices);
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-cam60.c linux-2.6-stable/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.21/arch/arm/mach-at91/board-cam60.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-cam60.c Tue May 8 12:13:30 2007
-@@ -0,0 +1,148 @@
-+/*
-+ * KwikByte CAM60
-+ *
-+ * based on board-sam9260ek.c
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 5 = USART0 .. USART5
-+ * 6 = DBGU
-+ */
-+static struct at91_uart_config __initdata cam60_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 1,
-+ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
-+};
-+
-+static void __init cam60_map_io(void)
-+{
-+ /* Initialize processor: 10 MHz crystal */
-+ at91sam9260_initialize(10000000);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&cam60_uart_config);
-+}
-+
-+static void __init cam60_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata cam60_spi_partitions[] = {
-+ {
-+ .name = "BOOT1",
-+ .offset = 0,
-+ .size = 4 * 1056,
-+ },
-+ {
-+ .name = "BOOT2",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 256 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 2222 * 1056,
-+ },
-+ {
-+ .name = "file system",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
-+ .name = "spi_flash",
-+ .parts = cam60_spi_partitions,
-+ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
-+};
-+#endif
-+
-+static struct spi_board_info cam60_spi_devices[] = {
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ .platform_data = &cam60_spi_flash_platform_data
-+ },
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct __initdata at91_eth_data cam60_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PB5,
-+ .is_rmii = 0,
-+};
-+
-+
-+static void __init cam60_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* SPI */
-+ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-+ /* Ethernet */
-+ at91_add_device_eth(&cam60_macb_data);
-+}
-+
-+MACHINE_START(CAM60, "KwikByte CAM60")
-+ /* Maintainer: KwikByte */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = cam60_map_io,
-+ .init_irq = cam60_init_irq,
-+ .init_machine = cam60_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-chub.c linux-2.6-stable/arch/arm/mach-at91/board-chub.c
---- linux-2.6.21/arch/arm/mach-at91/board-chub.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-chub.c Tue May 8 12:13:30 2007
-@@ -0,0 +1,132 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-chub.c
-+ *
-+ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
-+ * by Kuten Ivan
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata chub_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 5,
-+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init chub_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static void __init chub_map_io(void)
-+{
-+ /* Initialize clocks: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&chub_uart_config);
-+}
-+
-+static struct at91_eth_data __initdata chub_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PB29,
-+ .is_rmii = 0,
-+};
-+
-+static struct mtd_partition __initdata chub_nand_partition[] = {
-+ {
-+ .name = "NAND Partition 1",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(chub_nand_partition);
-+ return chub_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata chub_nand_data = {
-+ .ale = 22,
-+ .cle = 21,
-+ .enable_pin = AT91_PIN_PA27,
-+ .partition_info = nand_partitions,
-+};
-+
-+static struct spi_board_info chub_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+};
-+
-+static void __init chub_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* I2C */
-+ at91_add_device_i2c();
-+ /* Ethernet */
-+ at91_add_device_eth(&chub_eth_data);
-+ /* SPI */
-+ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
-+ /* NAND Flash */
-+ at91_add_device_nand(&chub_nand_data);
-+ /* Disable write protect for NAND */
-+ at91_set_gpio_output(AT91_PIN_PB7, 1);
-+ /* Power enable for 3x RS-232 and 1x RS-485 */
-+ at91_set_gpio_output(AT91_PIN_PB9, 1);
-+ /* Disable write protect for FRAM */
-+ at91_set_gpio_output(AT91_PIN_PA21, 1);
-+ /* Disable write protect for Dataflash */
-+ at91_set_gpio_output(AT91_PIN_PA19, 1);
-+}
-+
-+MACHINE_START(CHUB, "Promwad Chub")
-+ /* Maintainer: Ivan Kuten AT Promwad DOT com */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = chub_map_io,
-+ .init_irq = chub_init_irq,
-+ .init_machine = chub_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-csb337.c linux-2.6-stable/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.21/arch/arm/mach-at91/board-csb337.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-csb337.c Tue May 8 12:13:30 2007
-@@ -24,6 +24,7 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/interrupt.h>
- #include <linux/mtd/physmap.h>
-
- #include <asm/hardware.h>
-@@ -59,6 +60,7 @@
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb337_uart_config);
-@@ -149,6 +151,55 @@
- .num_resources = ARRAY_SIZE(csb_flash_resources),
- };
-
-+static struct at91_gpio_led csb337_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB0,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB1,
-+ .trigger = "timer",
-+ },
-+ {
-+ .name = "led2",
-+ .gpio = AT91_PIN_PB2,
-+ }
-+};
-+
-+#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
-+static irqreturn_t switch_irq_handler(int irq, void *context)
-+{
-+ return IRQ_HANDLED;
-+}
-+
-+static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
-+{
-+ int res;
-+
-+ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
-+ if (res == 0)
-+ enable_irq_wake(irq);
-+}
-+
-+static void __init csb300_switches(void)
-+{
-+#ifdef CONFIG_CSB300_WAKE_SW0
-+ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */
-+ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
-+#endif
-+#ifdef CONFIG_CSB300_WAKE_SW1
-+ at91_set_gpio_input(AT91_PIN_PB28, 1);
-+ at91_set_deglitch(AT91_PIN_PB28, 1);
-+ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
-+#endif
-+ /* there's also SW2 at PA21, GPIO or TIOA2 */
-+}
-+#else
-+static void __init csb300_switches(void) {}
-+#endif
-+
- static void __init csb337_board_init(void)
- {
- /* Serial */
-@@ -168,8 +219,12 @@
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
- at91_add_device_mmc(0, &csb337_mmc_data);
-+ /* LEDS */
-+ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
- /* NOR flash */
- platform_device_register(&csb_flash);
-+ /* Switches on CSB300 */
-+ csb300_switches();
- }
-
- MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-dk.c linux-2.6-stable/arch/arm/mach-at91/board-dk.c
---- linux-2.6.21/arch/arm/mach-at91/board-dk.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-dk.c Tue May 8 14:29:12 2007
-@@ -73,6 +73,185 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x30000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x30200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init dk_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 2 */
-+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0x00},
-+ {S1DREG_GPIO_CNF1, 0x00},
-+ {S1DREG_GPIO_CTL0, 0x08},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+ .initregs = dk_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
-+ .platform_init_video = dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource dk_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &dk_s1dfb_pdata,
-+ },
-+ .resource = dk_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+ platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -151,7 +330,7 @@
- #define DK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data dk_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource dk_flash_resource = {
-@@ -170,6 +349,13 @@
- .num_resources = 1,
- };
-
-+static struct at91_gpio_led dk_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB2,
-+ .trigger = "timer",
-+ }
-+};
-
- static void __init dk_board_init(void)
- {
-@@ -200,8 +386,10 @@
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
-+ /* LEDs */
-+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
- /* VGA */
--// dk_add_device_video();
-+ dk_add_device_video();
- }
-
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-ek.c linux-2.6-stable/arch/arm/mach-at91/board-ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-ek.c Tue May 8 14:29:22 2007
-@@ -73,6 +73,187 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x40000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x40200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init ek_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 3 */
-+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
-+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
-+ {S1DREG_GPIO_CTL0, 0x00},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {0x005E, 0x9F},
-+ {0x005F, 0x00},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+ .initregs = ek_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
-+ .platform_init_video = ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource ek_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &ek_s1dfb_pdata,
-+ },
-+ .resource = ek_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+ platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -113,7 +294,7 @@
- #define EK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data ek_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource ek_flash_resource = {
-@@ -132,6 +313,18 @@
- .num_resources = 1,
- };
-
-+static struct at91_gpio_led ek_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB1,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB2,
-+ .trigger = "timer",
-+ }
-+};
-
- static void __init ek_board_init(void)
- {
-@@ -158,8 +351,10 @@
- #endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
--// ek_add_device_video();
-+ ek_add_device_video();
- }
-
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-kb9202.c linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.21/arch/arm/mach-at91/board-kb9202.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c Tue May 8 12:21:31 2007
-@@ -37,6 +37,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-
-+#include <asm/arch/at91rm9200_mc.h>
-+
- #include "generic.h"
-
-
-@@ -111,6 +113,48 @@
- .partition_info = nand_partitions,
- };
-
-+
-+#if defined(CONFIG_FB_S1D15605)
-+#warning "Rather pass reset pin via platform_data"
-+static struct resource kb9202_lcd_resources[] = {
-+ [0] = {
-+ .start = AT91_CHIPSELECT_2,
-+ .end = AT91_CHIPSELECT_2 + 0x200FF,
-+ .flags = IORESOURCE_MEM
-+ },
-+ [1] = { /* reset pin */
-+ .start = AT91_PIN_PC22,
-+ .end = AT91_PIN_PC22,
-+ .flags = IORESOURCE_MEM
-+ },
-+};
-+
-+static struct platform_device kb9202_lcd_device = {
-+ .name = "s1d15605fb",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
-+ .resource = kb9202_lcd_resources,
-+};
-+
-+static void __init kb9202_add_device_lcd(void)
-+{
-+ /* In case the boot loader did not set the chip select mode and timing */
-+ at91_sys_write(AT91_SMC_CSR(2),
-+ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
-+ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
-+
-+ /* Backlight pin = output, off */
-+ at91_set_gpio_output(AT91_PIN_PC23, 0);
-+
-+ /* Reset pin = output, in reset */
-+ at91_set_gpio_output(AT91_PIN_PC22, 0);
-+
-+ platform_device_register(&kb9202_lcd_device);
-+}
-+#else
-+static void __init kb9202_add_device_lcd(void) {}
-+#endif
-+
- static void __init kb9202_board_init(void)
- {
- /* Serial */
-@@ -129,6 +173,8 @@
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
-+ /* LCD */
-+ kb9202_add_device_lcd();
- }
-
- MACHINE_START(KB9200, "KB920x")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c Tue May 8 12:13:30 2007
-@@ -104,9 +104,9 @@
- },
- #endif
- #endif
--#if defined(CONFIG_SND_AT73C213)
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- { /* AT73C213 DAC */
-- .modalias = "snd_at73c213",
-+ .modalias = "at73c213",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
-@@ -118,7 +118,7 @@
- /*
- * MACB Ethernet device
- */
--static struct __initdata at91_eth_data ek_macb_data = {
-+static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
- };
-@@ -188,6 +188,8 @@
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
-+ /* I2C */
-+ at91_add_device_i2c();
- }
-
- MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c Wed May 9 12:37:19 2007
-@@ -25,7 +25,11 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
- #include <linux/dm9000.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -59,6 +63,9 @@
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9261_initialize(18432000);
-
-+ /* Setup the LEDs */
-+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-+
- /* Setup the serial ports and console */
- at91_init_serial(&ek_uart_config);
- }
-@@ -195,6 +202,41 @@
- };
-
- /*
-+ * ADS7846 Touchscreen
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+
-+static int ads7843_pendown_state(void)
-+{
-+ return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+ .model = 7843,
-+ .x_min = 150,
-+ .x_max = 3830,
-+ .y_min = 190,
-+ .y_max = 3830,
-+ .vref_delay_usecs = 100,
-+ .x_plate_ohms = 450,
-+ .y_plate_ohms = 250,
-+ .pressure_max = 15000,
-+ .debounce_max = 1,
-+ .debounce_rep = 0,
-+ .debounce_tol = (~0),
-+ .get_pendown_state = ads7843_pendown_state,
-+};
-+
-+static void __init ek_add_device_ts(void)
-+{
-+ at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */
-+ at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */
-+}
-+#else
-+static void __init ek_add_device_ts(void) {}
-+#endif
-+
-+/*
- * SPI devices
- */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -204,6 +246,17 @@
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+ {
-+ .modalias = "ads7846",
-+ .chip_select = 2,
-+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
-+ .bus_num = 0,
-+ .platform_data = &ads_info,
-+ .irq = AT91SAM9261_ID_IRQ0,
-+ .controller_data = AT91_PIN_PA28, /* CS pin */
-+ },
-+#endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
- .modalias = "mtd_dataflash",
-@@ -211,9 +264,9 @@
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
--#elif defined(CONFIG_SND_AT73C213)
-+#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- { /* AT73C213 DAC */
-- .modalias = "snd_at73c213",
-+ .modalias = "at73c213",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
-@@ -222,6 +275,65 @@
- };
-
-
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D50VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+ if (on)
-+ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
-+ else
-+ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -241,10 +353,14 @@
- #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* Touchscreen */
-+ ek_add_device_ts();
- #else
- /* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
- #endif
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
- }
-
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c Tue May 8 12:56:33 2007
-@@ -25,6 +25,10 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -86,6 +90,40 @@
-
-
- /*
-+ * ADS7846 Touchscreen
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+static int ads7843_pendown_state(void)
-+{
-+ return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+ .model = 7843,
-+ .x_min = 150,
-+ .x_max = 3830,
-+ .y_min = 190,
-+ .y_max = 3830,
-+ .vref_delay_usecs = 100,
-+ .x_plate_ohms = 450,
-+ .y_plate_ohms = 250,
-+ .pressure_max = 15000,
-+ .debounce_max = 1,
-+ .debounce_rep = 0,
-+ .debounce_tol = (~0),
-+ .get_pendown_state = ads7843_pendown_state,
-+};
-+
-+static void __init ek_add_device_ts(void)
-+{
-+ at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
-+ at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */
-+}
-+#else
-+static void __init ek_add_device_ts(void) {}
-+#endif
-+
-+/*
- * SPI devices.
- */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -97,6 +135,16 @@
- .bus_num = 0,
- },
- #endif
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+ {
-+ .modalias = "ads7846",
-+ .chip_select = 3,
-+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
-+ .bus_num = 0,
-+ .platform_data = &ads_info,
-+ .irq = AT91SAM9263_ID_IRQ1,
-+ },
-+#endif
- };
-
-
-@@ -112,6 +160,14 @@
-
-
- /*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+ .is_rmii = 1,
-+};
-+
-+
-+/*
- * NAND flash
- */
- static struct mtd_partition __initdata ek_nand_partition[] = {
-@@ -148,6 +204,73 @@
- };
-
-
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D70VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+ if (on)
-+ at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
-+ else
-+ at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
-+/*
-+ * AC97
-+ */
-+static struct atmel_ac97_data ek_ac97_data = {
-+ .reset_pin = AT91_PIN_PA13,
-+};
-+
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -157,11 +280,22 @@
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
-+ at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* Touchscreen */
-+ ek_add_device_ts();
- /* MMC */
- at91_add_device_mmc(1, &ek_mmc_data);
-+ /* Ethernet */
-+ at91_add_device_eth(&ek_macb_data);
- /* NAND */
- at91_add_device_nand(&ek_nand_data);
-+ /* I2C */
-+ at91_add_device_i2c();
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
-+ /* AC97 */
-+ at91_add_device_ac97(&ek_ac97_data);
- }
-
- MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c Wed May 9 10:58:34 2007
-@@ -0,0 +1,204 @@
-+/*
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/fb.h>
-+#include <linux/clk.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata ek_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 2,
-+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init ek_map_io(void)
-+{
-+ /* Initialize processor: 12.000 MHz crystal */
-+ at91sam9rl_initialize(12000000);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&ek_uart_config);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+ at91sam9rl_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+ .wire4 = 1,
-+ .det_pin = AT91_PIN_PA15,
-+// .wp_pin = ... not connected
-+// .vcc_pin = ... not connected
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+ {
-+ .name = "Partition 1",
-+ .offset = 0,
-+ .size = 256 * 1024,
-+ },
-+ {
-+ .name = "Partition 2",
-+ .offset = 256 * 1024 ,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
-+ return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+ .ale = 21,
-+ .cle = 22,
-+// .det_pin = ... not connected
-+ .rdy_pin = AT91_PIN_PD17,
-+ .enable_pin = AT91_PIN_PB6,
-+ .partition_info = nand_partitions,
-+ .bus_width_16 = 0,
-+};
-+
-+
-+/*
-+ * SPI devices
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ },
-+};
-+
-+
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D50VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+ if (on)
-+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
-+ else
-+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
-+static void __init ek_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* I2C */
-+ at91_add_device_i2c();
-+ /* NAND */
-+ at91_add_device_nand(&ek_nand_data);
-+ /* SPI */
-+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+ /* MMC */
-+ at91_add_device_mmc(0, &ek_mmc_data);
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
-+}
-+
-+MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-+ /* Maintainer: Atmel */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = ek_map_io,
-+ .init_irq = ek_init_irq,
-+ .init_machine = ek_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/clock.c linux-2.6-stable/arch/arm/mach-at91/clock.c
---- linux-2.6.21/arch/arm/mach-at91/clock.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/clock.c Tue May 8 12:13:30 2007
-@@ -32,6 +32,7 @@
- #include <asm/arch/cpu.h>
-
- #include "clock.h"
-+#include "generic.h"
-
-
- /*
-@@ -254,6 +255,23 @@
-
- /*------------------------------------------------------------------------*/
-
-+#ifdef CONFIG_PM
-+
-+int clk_must_disable(struct clk *clk)
-+{
-+ if (!at91_suspend_entering_slow_clock())
-+ return 0;
-+
-+ while (clk->parent)
-+ clk = clk->parent;
-+ return clk != &clk32k;
-+}
-+EXPORT_SYMBOL(clk_must_disable);
-+
-+#endif
-+
-+/*------------------------------------------------------------------------*/
-+
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
- /*
-@@ -375,6 +393,7 @@
- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-
- seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
-+#warning "Hard-coded PCK"
- for (i = 0; i < 4; i++)
- seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
- seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/generic.h linux-2.6-stable/arch/arm/mach-at91/generic.h
---- linux-2.6.21/arch/arm/mach-at91/generic.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/generic.h Wed May 9 10:20:54 2007
-@@ -13,12 +13,14 @@
- extern void __init at91sam9260_initialize(unsigned long main_clock);
- extern void __init at91sam9261_initialize(unsigned long main_clock);
- extern void __init at91sam9263_initialize(unsigned long main_clock);
-+extern void __init at91sam9rl_initialize(unsigned long main_clock);
-
- /* Interrupts */
- extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
-+extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
- extern void __init at91_aic_init(unsigned int priority[]);
-
- /* Timer */
-@@ -34,6 +36,7 @@
- /* Power Management */
- extern void at91_irq_suspend(void);
- extern void at91_irq_resume(void);
-+extern int at91_suspend_entering_slow_clock(void);
-
- /* GPIO */
- #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/ics1523.c linux-2.6-stable/arch/arm/mach-at91/ics1523.c
---- linux-2.6.21/arch/arm/mach-at91/ics1523.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/ics1523.c Tue May 8 12:13:30 2007
-@@ -0,0 +1,207 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ * Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+ int sclock;
-+
-+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+ if (sclock % 10 >= 5)
-+ sclock = (sclock /10) - 5;
-+ else
-+ sclock = (sclock /10)- 6;
-+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
-+
-+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ /* Wait TXcomplete ... */
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ }
-+
-+ if (Status & AT91_TWI_TXCOMP) {
-+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+ return ICS1523_ACCESS_OK;
-+ }
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_THR, data_out);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ if (Status & AT91_TWI_ERROR) {
-+ /* If Underrun OR NACK - Start again */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+ }
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ };
-+
-+ if (Status & AT91_TWI_TXCOMP)
-+ return ICS1523_ACCESS_OK;
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+ int nb_trial;
-+ int ack = ICS1523_ACCESS_OK;
-+ unsigned int status = 0xffffffff;
-+ struct clk *twi_clk;
-+
-+ /* Map in TWI peripheral */
-+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+ if (!twi_base)
-+ return -ENOMEM;
-+
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PA25, 1);
-+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+ /* Enable the TWI clock */
-+ twi_clk = clk_get(NULL, "twi_clk");
-+ if (IS_ERR(twi_clk))
-+ return ICS1523_ACCESS_ERROR;
-+ clk_enable(twi_clk);
-+
-+ /* Disable interrupts */
-+ at91_twi_write(AT91_TWI_IDR, -1);
-+
-+ /* Reset peripheral */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+ /* Set Master mode */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+ /* Set TWI Clock Waveform Generator Register */
-+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
-+
-+ /* ICS1523 Initialisation */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+ nb_trial = 0;
-+ do {
-+ nb_trial++;
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ /* All done - cleanup */
-+ iounmap(twi_base);
-+ clk_disable(twi_clk);
-+ clk_put(twi_clk);
-+
-+ return ack;
-+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm.c linux-2.6-stable/arch/arm/mach-at91/pm.c
---- linux-2.6.21/arch/arm/mach-at91/pm.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/pm.c Tue May 8 12:13:31 2007
-@@ -63,6 +63,7 @@
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-+#warning "SAM9260 only has 3 programmable clocks."
- static int at91_pm_verify_clocks(void)
- {
- unsigned long scsr;
-@@ -104,20 +105,15 @@
- }
-
- /*
-- * Call this from platform driver suspend() to see how deeply to suspend.
-+ * This is called from clk_must_disable(), to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
-- *
-- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
-- * the very same problem (but not using at91 main_clk), and it'd be better
-- * to add one generic API rather than lots of platform-specific ones.
- */
- int at91_suspend_entering_slow_clock(void)
- {
- return (target_state == PM_SUSPEND_MEM);
- }
--EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
- static void (*slow_clock)(void);
-@@ -207,16 +203,23 @@
- .enter = at91_pm_enter,
- };
-
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91rm9200_slow_clock(void);
-+extern u32 at91rm9200_slow_clock_sz;
-+#endif
-+
- static int __init at91_pm_init(void)
- {
-- printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-- /* REVISIT allocations of SRAM should be dynamically managed.
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+ /*
-+ * REVISIT allocations of SRAM should be dynamically managed.
- * FIQ handlers and other components will want SRAM/TCM too...
- */
-- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-+ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+ printk("AT91: Power Management (with slow clock mode)\n");
-+#else
-+ printk("AT91: Power Management\n");
- #endif
-
- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S Tue May 8 12:13:31 2007
-@@ -0,0 +1,172 @@
-+/*
-+ * arch/arm/mach-at91/pm_slow_clock.S
-+ *
-+ * Copyright (C) 2006 Savin Zlobec
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#define MCKRDY_TIMEOUT 1000
-+#define MOSCRDY_TIMEOUT 1000
-+#define PLLALOCK_TIMEOUT 1000
-+
-+ .macro wait_mckrdy
-+ mov r2, #MCKRDY_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_MCKRDY
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_moscrdy
-+ mov r2, #MOSCRDY_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_MOSCS
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_pllalock
-+ mov r2, #PLLALOCK_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_LOCKA
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_plladis
-+ mov r2, #PLLALOCK_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_LOCKA
-+ bne 1b
-+2:
-+ .endm
-+
-+ .text
-+
-+ENTRY(at91rm9200_slow_clock)
-+
-+ ldr r1, .at91_va_base_sys
-+
-+ /* Put SDRAM in self refresh mode */
-+
-+ b 1f
-+ .align 5
-+1: mcr p15, 0, r0, c7, c10, 4
-+ mov r2, #1
-+ str r2, [r1, #AT91_SDRAMC_SRR]
-+
-+ /* Save Master clock setting */
-+
-+ ldr r2, [r1, #AT91_PMC_MCKR]
-+ str r2, .saved_mckr
-+
-+ /*
-+ * Set the Master clock source to slow clock
-+ *
-+ * First set the CSS field, wait for MCKRDY
-+ * and than set the PRES and MDIV fields.
-+ *
-+ * See eratta #2[78] for details.
-+ */
-+
-+ bic r2, r2, #3
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+ mov r2, #0
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ /* Save PLLA setting and disable it */
-+
-+ ldr r2, [r1, #AT91_CKGR_PLLAR]
-+ str r2, .saved_pllar
-+
-+ mov r2, #0
-+ str r2, [r1, #AT91_CKGR_PLLAR]
-+
-+ wait_plladis
-+
-+ /* Turn off the main oscillator */
-+
-+ ldr r2, [r1, #AT91_CKGR_MOR]
-+ bic r2, r2, #AT91_PMC_MOSCEN
-+ str r2, [r1, #AT91_CKGR_MOR]
-+
-+ /* Wait for interrupt */
-+
-+ mcr p15, 0, r0, c7, c0, 4
-+
-+ /* Turn on the main oscillator */
-+
-+ ldr r2, [r1, #AT91_CKGR_MOR]
-+ orr r2, r2, #AT91_PMC_MOSCEN
-+ str r2, [r1, #AT91_CKGR_MOR]
-+
-+ wait_moscrdy
-+
-+ /* Restore PLLA setting */
-+
-+ ldr r2, .saved_pllar
-+ str r2, [r1, #AT91_CKGR_PLLAR]
-+
-+ wait_pllalock
-+
-+ /*
-+ * Restore master clock setting
-+ *
-+ * First set PRES if it was not 0,
-+ * than set CSS and MDIV fields.
-+ * After every change wait for
-+ * MCKRDY.
-+ *
-+ * See eratta #2[78] for details.
-+ */
-+
-+ ldr r2, .saved_mckr
-+ tst r2, #0x1C
-+ beq 2f
-+ and r2, r2, #0x1C
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+2: ldr r2, .saved_mckr
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+ mov pc, lr
-+
-+.saved_mckr:
-+ .word 0
-+
-+.saved_pllar:
-+ .word 0
-+
-+.at91_va_base_sys:
-+ .word AT91_VA_BASE_SYS
-+
-+ENTRY(at91rm9200_slow_clock_sz)
-+ .word .-at91rm9200_slow_clock
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.c linux-2.6-stable/arch/arm/mach-at91/tclib.c
---- linux-2.6.21/arch/arm/mach-at91/tclib.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/tclib.c Tue May 8 12:13:31 2007
-@@ -0,0 +1,17 @@
-+#include <linux/clk.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock *blocks;
-+static int nblocks;
-+
-+/*
-+ * Called from the processor-specific init to register the TC Blocks.
-+ */
-+void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n)
-+{
-+ blocks = tcblocks;
-+ nblocks = n;
-+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.h linux-2.6-stable/arch/arm/mach-at91/tclib.h
---- linux-2.6.21/arch/arm/mach-at91/tclib.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/tclib.h Tue May 8 12:13:31 2007
-@@ -0,0 +1,11 @@
-+
-+#define TC_PER_TCB 3
-+
-+struct atmel_tcblock {
-+ u32 physaddr;
-+ void __iomem *ioaddr;
-+ struct clk *clk[TC_PER_TCB];
-+ int irq[TC_PER_TCB];
-+};
-+
-+extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
-diff -urN -x CVS linux-2.6.21/arch/arm/mm/Kconfig linux-2.6-stable/arch/arm/mm/Kconfig
---- linux-2.6.21/arch/arm/mm/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mm/Kconfig Wed May 9 10:20:54 2007
-@@ -171,8 +171,8 @@
- # ARM926T
- config CPU_ARM926T
- bool "Support ARM926T processor"
-- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
-- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
-+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX
-+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX
- select CPU_32v5
- select CPU_ABRT_EV5TJ
- select CPU_CACHE_VIVT
-diff -urN -x CVS linux-2.6.21/arch/arm/tools/mach-types linux-2.6-stable/arch/arm/tools/mach-types
---- linux-2.6.21/arch/arm/tools/mach-types Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/tools/mach-types Tue May 8 12:13:31 2007
-@@ -1335,3 +1335,32 @@
- comtech_router MACH_COMTECH_ROUTER COMTECH_ROUTER 1327
- sbc2410x MACH_SBC2410X SBC2410X 1328
- at4x0bd MACH_AT4X0BD AT4X0BD 1329
-+cbifr MACH_CBIFR CBIFR 1330
-+arcom_quantum MACH_ARCOM_QUANTUM ARCOM_QUANTUM 1331
-+matrix520 MACH_MATRIX520 MATRIX520 1332
-+matrix510 MACH_MATRIX510 MATRIX510 1333
-+matrix500 MACH_MATRIX500 MATRIX500 1334
-+m501 MACH_M501 M501 1335
-+aaeon1270 MACH_AAEON1270 AAEON1270 1336
-+matrix500ev MACH_MATRIX500EV MATRIX500EV 1337
-+pac500 MACH_PAC500 PAC500 1338
-+pnx8181 MACH_PNX8181 PNX8181 1339
-+colibri320 MACH_COLIBRI320 COLIBRI320 1340
-+aztoolbb MACH_AZTOOLBB AZTOOLBB 1341
-+aztoolg2 MACH_AZTOOLG2 AZTOOLG2 1342
-+dvlhost MACH_DVLHOST DVLHOST 1343
-+zir9200 MACH_ZIR9200 ZIR9200 1344
-+zir9260 MACH_ZIR9260 ZIR9260 1345
-+cocopah MACH_COCOPAH COCOPAH 1346
-+nds MACH_NDS NDS 1347
-+rosencrantz MACH_ROSENCRANTZ ROSENCRANTZ 1348
-+fttx_odsc MACH_FTTX_ODSC FTTX_ODSC 1349
-+classe_r6904 MACH_CLASSE_R6904 CLASSE_R6904 1350
-+cam60 MACH_CAM60 CAM60 1351
-+mxc30031ads MACH_MXC30031ADS MXC30031ADS 1352
-+datacall MACH_DATACALL DATACALL 1353
-+at91eb01 MACH_AT91EB01 AT91EB01 1354
-+rty MACH_RTY RTY 1355
-+dwl2100 MACH_DWL2100 DWL2100 1356
-+vinsi MACH_VINSI VINSI 1357
-+db88f5281 MACH_DB88F5281 DB88F5281 1358
-diff -urN -x CVS linux-2.6.21/drivers/char/Kconfig linux-2.6-stable/drivers/char/Kconfig
---- linux-2.6.21/drivers/char/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/char/Kconfig Tue May 8 14:31:24 2007
-@@ -1071,5 +1071,21 @@
- /sys/devices/platform/telco_clock, with a number of files for
- controlling the behavior of this hardware.
-
-+config AT91_SPI
-+ bool "SPI driver (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200
-+ default y
-+ help
-+ The SPI driver gives access to this serial bus on the AT91RM9200
-+ processor.
-+
-+config AT91_SPIDEV
-+ bool "SPI device interface (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200 && AT91_SPI
-+ default n
-+ help
-+ The SPI driver gives user mode access to this serial
-+ bus on the AT91RM9200 processor.
-+
- endmenu
-
-diff -urN -x CVS linux-2.6.21/drivers/char/Makefile linux-2.6-stable/drivers/char/Makefile
---- linux-2.6.21/drivers/char/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/char/Makefile Tue May 8 14:31:24 2007
-@@ -93,6 +93,8 @@
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_AT91_SPI) += at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
-
- obj-$(CONFIG_WATCHDOG) += watchdog/
- obj-$(CONFIG_MWAVE) += mwave/
-diff -urN -x CVS linux-2.6.21/drivers/char/at91_spi.c linux-2.6-stable/drivers/char/at91_spi.c
---- linux-2.6.21/drivers/char/at91_spi.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/char/at91_spi.c Tue May 8 14:31:24 2007
-@@ -0,0 +1,336 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock; /* protect access to SPI bus */
-+static int current_device = -1; /* currently selected SPI device */
-+static struct clk *spi_clk; /* SPI clock */
-+static void __iomem *spi_base; /* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+ /* Ensure that requested device is valid */
-+ if ((device < 0) || (device >= NR_SPI_DEVICES))
-+ panic("at91_spi: spi_access_bus called with invalid device");
-+
-+ if (spi_enabled == 0) {
-+ clk_enable(spi_clk); /* Enable Peripheral clock */
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+#ifdef DEBUG_SPI
-+ printk("SPI on\n");
-+#endif
-+ }
-+ spi_enabled++;
-+
-+ /* Lock the SPI bus */
-+ down(&spi_lock);
-+ current_device = device;
-+
-+ /* Configure SPI bus for device */
-+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+ if (device != current_device)
-+ panic("at91_spi: spi_release called with invalid device");
-+
-+ /* Release the SPI bus */
-+ current_device = -1;
-+ up(&spi_lock);
-+
-+ spi_enabled--;
-+ if (spi_enabled == 0) {
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_disable(spi_clk); /* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+ printk("SPI off\n");
-+#endif
-+ }
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ int tx_size;
-+
-+ if (!list)
-+ panic("at91_spi: spi_transfer called with NULL transfer list");
-+ if (current_device == -1)
-+ panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ /* Store transfer list */
-+ device->xfers = list;
-+ list->curr = 0;
-+
-+ /* Assume there must be at least one transfer */
-+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+ /* Program PDC registers */
-+ at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+ at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+ /* Is there a second transfer? */
-+ if (list->nr_transfers > 1) {
-+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+ /* Program Next PDC registers */
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+ }
-+ else {
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+
-+ // TODO: If we are doing consecutive transfers (at high speed, or
-+ // small buffers), then it might be worth modifying the 'Delay between
-+ // Consecutive Transfers' in the CSR registers.
-+ // This is an issue if we cannot chain the next buffer fast enough
-+ // in the interrupt handler.
-+
-+ /* Enable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
-+ wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer end\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+ unsigned int status;
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+ if (!list)
-+ panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
-+
-+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+ device->tx = device->txnext; /* move next transfer to current transfer */
-+ device->rx = device->rxnext;
-+
-+ list->curr = list->curr + 1;
-+ if (list->curr == list->nr_transfers) { /* all transfers complete */
-+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
-+
-+ /* Disable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ device->xfers = NULL;
-+ complete(&transfer_complete);
-+ }
-+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+ else {
-+ int i = (list->curr)+1;
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+ int i;
-+ unsigned long scbr;
-+ struct resource *res;
-+
-+ init_MUTEX(&spi_lock);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+ return -EBUSY;
-+
-+ spi_base = ioremap(res->start, res->end - res->start + 1);
-+ if (!spi_base) {
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENOMEM;
-+ }
-+
-+ spi_clk = clk_get(NULL, "spi_clk");
-+ if (IS_ERR(spi_clk)) {
-+ printk(KERN_ERR "at91_spi: no clock defined\n");
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENODEV;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
-+
-+ /*
-+ * Calculate the correct SPI baud-rate divisor.
-+ */
-+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+ scbr = scbr + 1; /* round up */
-+
-+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+ /* Set Chip Select registers to good defaults */
-+ for (i = 0; i < 4; i++) {
-+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+ }
-+
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ memset(&spi_dev, 0, sizeof(spi_dev));
-+ spi_dev[0].pcs = 0xE;
-+ spi_dev[1].pcs = 0xD;
-+ spi_dev[2].pcs = 0xB;
-+ spi_dev[3].pcs = 0x7;
-+
-+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+ clk_put(spi_clk);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -EBUSY;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+
-+ return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_put(spi_clk);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ free_irq(AT91RM9200_ID_SPI, 0);
-+ return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+ .probe = at91spi_probe,
-+ .remove = __devexit_p(at91spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+ return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+ platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.21/drivers/char/at91_spidev.c linux-2.6-stable/drivers/char/at91_spidev.c
---- linux-2.6.21/drivers/char/at91_spidev.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/char/at91_spidev.c Tue May 8 14:31:24 2007
-@@ -0,0 +1,236 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ * Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+ unsigned int spi_device = (unsigned int) file->private_data;
-+
-+ struct mm_struct * mm;
-+ struct page ** maplist;
-+ struct spi_transfer_list* list;
-+ int pgcount;
-+
-+ unsigned int ofs, pagelen;
-+ int res, i, err;
-+
-+ if (!count) {
-+ return 0;
-+ }
-+
-+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!list) {
-+ return -ENOMEM;
-+ }
-+
-+ mm = current->mm;
-+
-+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+ if (pgcount >= MAX_SPI_TRANSFERS) {
-+ kfree(list);
-+ return -EFBIG;
-+ }
-+
-+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+ if (!maplist) {
-+ kfree(list);
-+ return -ENOMEM;
-+ }
-+ flush_cache_all();
-+ down_read(&mm->mmap_sem);
-+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+ up_read(&mm->mmap_sem);
-+
-+ if (err < 0) {
-+ kfree(list);
-+ kfree(maplist);
-+ return err;
-+ }
-+ pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+ /* Set default return value = transfer length */
-+ res = count;
-+
-+ /*
-+ * At this point, the virtual area buf[0] .. buf[count-1] will have
-+ * corresponding pages mapped in the physical memory and locked until
-+ * we unmap the kiobuf. The pages cannot be swapped out or moved
-+ * around.
-+ */
-+ ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+ pagelen = PAGE_SIZE - ofs;
-+ if (count < pagelen)
-+ pagelen = count;
-+
-+ for (i = 0; i < pgcount; i++) {
-+ flush_dcache_page(maplist[i]);
-+
-+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+ list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+ ofs = 0; /* all subsequent transfers start at beginning of a page */
-+ count = count - pagelen;
-+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+ }
-+ list->nr_transfers = pgcount;
-+
-+ /* Perform transfer on SPI bus */
-+ spi_access_bus(spi_device);
-+ spi_transfer(list);
-+ spi_release_bus(spi_device);
-+
-+ while (pgcount--) {
-+ page_cache_release (maplist[pgcount]);
-+ }
-+ flush_cache_all();
-+
-+ kfree(maplist);
-+ kfree(list);
-+
-+ return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ // TODO: This interface can be used to configure the SPI bus.
-+ // Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+ switch(cmd) {
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+ unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ /*
-+ * 'private_data' is actually a pointer, but we overload it with the
-+ * value we want to store.
-+ */
-+ file->private_data = (void *)spi_device;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = spidev_rd_wr,
-+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+ .ioctl = spidev_ioctl,
-+ .open = spidev_open,
-+ .release = spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+#endif
-+
-+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_DEVFS_FS
-+ devfs_mk_dir("spi");
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+ }
-+#endif
-+ printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_remove("spi/%d", i);
-+ }
-+
-+ devfs_remove("spi");
-+#endif
-+
-+ if (unregister_chrdev(SPI_MAJOR, "spi")) {
-+ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
-+ return;
-+ }
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Kconfig linux-2.6-stable/drivers/i2c/busses/Kconfig
---- linux-2.6.21/drivers/i2c/busses/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/Kconfig Tue May 8 12:13:31 2007
-@@ -81,6 +81,14 @@
- This supports the use of the I2C interface on Atmel AT91
- processors.
-
-+config I2C_AT91_CLOCKRATE
-+ prompt "Atmel AT91 I2C/TWI clock-rate"
-+ depends on I2C_AT91
-+ int
-+ default 100000
-+ help
-+ Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on I2C && (SOC_AU1550 || SOC_AU1200)
-@@ -545,6 +553,14 @@
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
-
-+config I2C_PCA
-+ tristate "PCA9564"
-+ depends on I2C
-+ select I2C_ALGOPCA
-+ help
-+ This driver support the Philips PCA 9564 Parallel bus to I2C
-+ bus controller.
-+
- config I2C_PCA_ISA
- tristate "PCA9564 on an ISA bus"
- depends on I2C
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Makefile linux-2.6-stable/drivers/i2c/busses/Makefile
---- linux-2.6.21/drivers/i2c/busses/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/Makefile Tue May 8 12:13:31 2007
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
- obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
- obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
-+obj-$(CONFIG_I2C_PCA) += i2c-pca.o
- obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
- obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
- obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-at91.c linux-2.6-stable/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.21/drivers/i2c/busses/i2c-at91.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/i2c-at91.c Tue May 8 12:13:31 2007
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
-
--#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
-
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
-
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
- at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
-
- /* Calcuate clock dividers */
-- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- cdiv = cdiv + 1; /* round up */
- ckdiv = 0;
- while (cdiv > 255) {
-@@ -61,11 +64,12 @@
- cdiv = cdiv >> 1;
- }
-
-- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
-- if (ckdiv > 5) {
-- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
-- ckdiv = 5;
-- }
-+ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 5;
-+ } else if (ckdiv > 7) {
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 7;
- }
-
- at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-pca.c linux-2.6-stable/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.21/drivers/i2c/busses/i2c-pca.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/i2c/busses/i2c-pca.c Tue May 8 12:13:31 2007
-@@ -0,0 +1,213 @@
-+/*
-+ * Platform driver for PCA9564 I2C bus controller.
-+ *
-+ * (C) 2006 Andrew Victor
-+ *
-+ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
-+ * Copyright (C) 2004 Arcom Control Systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-pca.h>
-+
-+#include <asm/io.h>
-+
-+#include "../algos/i2c-algo-pca.h"
-+
-+#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
-+#define PCA_CLOCK I2C_PCA_CON_59kHz
-+
-+//#define REG_SHIFT 2
-+#define REG_SHIFT 0
-+
-+//#define DEBUG_IO
-+
-+#define PCA_IO_SIZE 4
-+
-+static void __iomem *base_addr;
-+static int irq;
-+static wait_queue_head_t pca_wait;
-+
-+static int pca_getown(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_OWN_ADDRESS;
-+}
-+
-+static int pca_getclock(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_CLOCK;
-+}
-+
-+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
-+{
-+#ifdef DEBUG_IO
-+ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-+ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
-+#endif
-+ udelay(1);
-+ outb(val, base_addr + (reg << REG_SHIFT));
-+}
-+
-+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
-+{
-+ int res;
-+
-+ udelay(1);
-+ res = inb(base_addr + (reg << REG_SHIFT));
-+#ifdef DEBUG_IO
-+ {
-+ static char *names[] = { "STA", "DAT", "ADR", "CON" };
-+ printk("*** read %s => %#04x\n", names[reg], res);
-+ }
-+#endif
-+ return res;
-+}
-+
-+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
-+{
-+ int ret = 0;
-+
-+ if (irq > -1) {
-+ ret = wait_event_interruptible(pca_wait,
-+ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
-+ } else {
-+ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
-+ udelay(100);
-+ }
-+ return ret;
-+}
-+
-+static irqreturn_t pca_handler(int this_irq, void *dev_id)
-+{
-+ wake_up_interruptible(&pca_wait);
-+ return IRQ_HANDLED;
-+}
-+
-+static struct i2c_algo_pca_data pca_i2c_data = {
-+ .get_own = pca_getown,
-+ .get_clock = pca_getclock,
-+ .write_byte = pca_writebyte,
-+ .read_byte = pca_readbyte,
-+ .wait_for_interrupt = pca_waitforinterrupt,
-+};
-+
-+static struct i2c_adapter pca_i2c_ops = {
-+ .owner = THIS_MODULE,
-+ .id = I2C_HW_A_PLAT,
-+ .algo_data = &pca_i2c_data,
-+ .name = "PCA9564",
-+ .class = I2C_CLASS_HWMON,
-+};
-+
-+static int __devinit pca_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ init_waitqueue_head(&pca_wait);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+
-+ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
-+ return -ENXIO;
-+
-+ base_addr = ioremap(res->start, PCA_IO_SIZE);
-+ if (base_addr == NULL)
-+ goto out_region;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq > -1) {
-+ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
-+ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
-+ goto out_remap;
-+ }
-+ }
-+
-+ /* set up the driverfs linkage to our parent device */
-+ pca_i2c_ops.dev.parent = &pdev->dev;
-+
-+ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
-+ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
-+ goto out_irq;
-+ }
-+
-+ return 0;
-+
-+ out_irq:
-+ if (irq > -1)
-+ free_irq(irq, &pca_i2c_ops);
-+
-+ out_remap:
-+ iounmap(base_addr);
-+
-+ out_region:
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+ return -ENODEV;
-+}
-+
-+static int __devexit pca_i2c_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ i2c_del_adapter(&pca_i2c_ops);
-+
-+ if (irq > 0)
-+ free_irq(irq, NULL);
-+
-+ iounmap(base_addr);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver pca_i2c_driver = {
-+ .probe = pca_i2c_probe,
-+ .remove = __devexit_p(pca_i2c_remove),
-+ .driver = {
-+ .name = "pca9564",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init pca_i2c_init(void)
-+{
-+ return platform_driver_register(&pca_i2c_driver);
-+}
-+
-+static void __exit pca_i2c_exit(void)
-+{
-+ platform_driver_unregister(&pca_i2c_driver);
-+}
-+
-+module_init(pca_i2c_init);
-+module_exit(pca_i2c_exit);
-+
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("PCA9564 platform driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/input/touchscreen/ads7846.c linux-2.6-stable/drivers/input/touchscreen/ads7846.c
---- linux-2.6.21/drivers/input/touchscreen/ads7846.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/input/touchscreen/ads7846.c Tue May 8 12:56:33 2007
-@@ -39,7 +39,8 @@
- /*
- * This code has been heavily tested on a Nokia 770, and lightly
- * tested on other ads7846 devices (OSK/Mistral, Lubbock).
-- * Support for ads7843 and ads7845 has only been stubbed in.
-+ * Support for ads7843 tested on Atmel at91sam926x-EK.
-+ * Support for ads7845 has only been stubbed in.
- *
- * IRQ handling needs a workaround because of a shortcoming in handling
- * edge triggered IRQs on some platforms like the OMAP1/2. These
-@@ -246,18 +247,16 @@
-
- /* REVISIT: take a few more samples, and compare ... */
-
-- /* maybe off internal vREF */
-- if (use_internal) {
-- req->ref_off = REF_OFF;
-- req->xfer[4].tx_buf = &req->ref_off;
-- req->xfer[4].len = 1;
-- spi_message_add_tail(&req->xfer[4], &req->msg);
--
-- req->xfer[5].rx_buf = &req->scratch;
-- req->xfer[5].len = 2;
-- CS_CHANGE(req->xfer[5]);
-- spi_message_add_tail(&req->xfer[5], &req->msg);
-- }
-+ /* converter in low power mode & enable PENIRQ */
-+ req->ref_off = PWRDOWN;
-+ req->xfer[4].tx_buf = &req->ref_off;
-+ req->xfer[4].len = 1;
-+ spi_message_add_tail(&req->xfer[4], &req->msg);
-+
-+ req->xfer[5].rx_buf = &req->scratch;
-+ req->xfer[5].len = 2;
-+ CS_CHANGE(req->xfer[5]);
-+ spi_message_add_tail(&req->xfer[5], &req->msg);
-
- ts->irq_disabled = 1;
- disable_irq(spi->irq);
-@@ -536,6 +535,9 @@
- } else
- Rt = 0;
-
-+ if (ts->model == 7843)
-+ Rt = ts->pressure_max / 2;
-+
- /* Sample found inconsistent by debouncing or pressure is beyond
- * the maximum. Don't report it to user space, repeat at least
- * once more the measurement
-diff -urN -x CVS linux-2.6.21/drivers/leds/Kconfig linux-2.6-stable/drivers/leds/Kconfig
---- linux-2.6.21/drivers/leds/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/leds/Kconfig Tue May 8 12:13:31 2007
-@@ -76,6 +76,13 @@
- This option enables support for the Soekris net4801 and net4826 error
- LED.
-
-+config LEDS_AT91
-+ tristate "LED support using AT91 GPIOs"
-+ depends on LEDS_CLASS && ARCH_AT91 && !LEDS
-+ help
-+ This option enables support for LEDs connected to GPIO lines
-+ on AT91-based boards.
-+
- config LEDS_WRAP
- tristate "LED Support for the WRAP series LEDs"
- depends on LEDS_CLASS && SCx200_GPIO
-diff -urN -x CVS linux-2.6.21/drivers/leds/Makefile linux-2.6-stable/drivers/leds/Makefile
---- linux-2.6.21/drivers/leds/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/leds/Makefile Tue May 8 12:13:31 2007
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
- obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
-+obj-$(CONFIG_LEDS_AT91) += leds-at91.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-diff -urN -x CVS linux-2.6.21/drivers/leds/leds-at91.c linux-2.6-stable/drivers/leds/leds-at91.c
---- linux-2.6.21/drivers/leds/leds-at91.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/leds/leds-at91.c Tue May 8 12:13:31 2007
-@@ -0,0 +1,140 @@
-+/*
-+ * AT91 GPIO based LED driver
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */
-+
-+struct at91_led {
-+ struct led_classdev cdev;
-+ struct list_head list;
-+ struct at91_gpio_led *led_data;
-+};
-+
-+/*
-+ * Change the state of the LED.
-+ */
-+static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
-+{
-+ struct at91_led *led = container_of(cdev, struct at91_led, cdev);
-+ short active = (value == LED_OFF);
-+
-+ if (led->led_data->flags & 1) /* active high/low? */
-+ active = !active;
-+ at91_set_gpio_value(led->led_data->gpio, active);
-+}
-+
-+static int __devexit at91_led_remove(struct platform_device *pdev)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_unregister(&led->cdev);
-+
-+#warning "Free allocated memory"
-+ // TODO: Free memory. kfree(led);
-+
-+ return 0;
-+}
-+
-+static int __init at91_led_probe(struct platform_device *pdev)
-+{
-+ int status = 0;
-+ struct at91_gpio_led *pdata = pdev->dev.platform_data;
-+ unsigned nr_leds;
-+ struct at91_led *led;
-+
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ nr_leds = pdata->index; /* first index stores number of LEDs */
-+
-+ while (nr_leds--) {
-+ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
-+ if (!led) {
-+ dev_err(&pdev->dev, "No memory for device\n");
-+ status = -ENOMEM;
-+ goto cleanup;
-+ }
-+ led->led_data = pdata;
-+ led->cdev.name = pdata->name;
-+ led->cdev.brightness_set = at91_led_set,
-+ led->cdev.default_trigger = pdata->trigger;
-+
-+ status = led_classdev_register(&pdev->dev, &led->cdev);
-+ if (status < 0) {
-+ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
-+cleanup:
-+ at91_led_remove(pdev);
-+ break;
-+ }
-+ list_add(&led->list, &at91_led_list);
-+ pdata++;
-+ }
-+ return status;
-+}
-+
-+#ifdef CONFIG_PM
-+static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_suspend(&led->cdev);
-+
-+ return 0;
-+}
-+
-+static int at91_led_resume(struct platform_device *dev)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_resume(&led->cdev);
-+
-+ return 0;
-+}
-+#else
-+#define at91_led_suspend NULL
-+#define at91_led_resume NULL
-+#endif
-+
-+static struct platform_driver at91_led_driver = {
-+ .probe = at91_led_probe,
-+ .remove = __devexit_p(at91_led_remove),
-+ .suspend = at91_led_suspend,
-+ .resume = at91_led_resume,
-+ .driver = {
-+ .name = "at91_leds",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_led_init(void)
-+{
-+ return platform_driver_register(&at91_led_driver);
-+}
-+module_init(at91_led_init);
-+
-+static void __exit at91_led_exit(void)
-+{
-+ platform_driver_unregister(&at91_led_driver);
-+}
-+module_exit(at91_led_exit);
-+
-+MODULE_DESCRIPTION("AT91 GPIO LED driver");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/mmc/at91_mci.c linux-2.6-stable/drivers/mmc/at91_mci.c
---- linux-2.6.21/drivers/mmc/at91_mci.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mmc/at91_mci.c Fri May 11 17:13:13 2007
-@@ -86,7 +86,7 @@
-
- #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
- | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
-- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-+ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-
- #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
- #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-@@ -561,9 +561,7 @@
- pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
- status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
-- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
-- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
-- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
-+ if (status & AT91_MCI_ERRORS) {
- if ((status & AT91_MCI_RCRCE) &&
- ((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
- cmd->error = MMC_ERR_NONE;
-@@ -665,15 +663,15 @@
-
- int_status = at91_mci_read(host, AT91_MCI_SR);
- int_mask = at91_mci_read(host, AT91_MCI_IMR);
--
-+
- pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
- int_status & int_mask);
--
-+
- int_status = int_status & int_mask;
-
- if (int_status & AT91_MCI_ERRORS) {
- completed = 1;
--
-+
- if (int_status & AT91_MCI_UNRE)
- pr_debug("MMC: Underrun error\n");
- if (int_status & AT91_MCI_OVRE)
-@@ -821,7 +819,7 @@
- mmc->f_min = 375000;
- mmc->f_max = 25000000;
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-- mmc->caps = MMC_CAP_BYTEBLOCK;
-+ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
-
- mmc->max_blk_size = 4095;
- mmc->max_blk_count = mmc->max_req_size;
-@@ -895,6 +893,8 @@
-
- mmc_add_host(mmc);
-
-+ device_init_wakeup(&pdev->dev, 1);
-+
- /*
- * monitor card insertion/removal if we can
- */
-@@ -924,6 +924,8 @@
-
- host = mmc_priv(mmc);
-
-+ device_init_wakeup(&pdev->dev, 0);
-+
- if (host->present != -1) {
- free_irq(host->board->det_pin, host);
- cancel_delayed_work(&host->mmc->detect);
-@@ -951,8 +953,12 @@
- static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
- {
- struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct at91mci_host *host = mmc_priv(mmc);
- int ret = 0;
-
-+ if (device_may_wakeup(&pdev->dev))
-+ enable_irq_wake(host->board->det_pin);
-+
- if (mmc)
- ret = mmc_suspend_host(mmc, state);
-
-@@ -962,8 +968,12 @@
- static int at91_mci_resume(struct platform_device *pdev)
- {
- struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct at91mci_host *host = mmc_priv(mmc);
- int ret = 0;
-
-+ if (device_may_wakeup(&pdev->dev))
-+ disable_irq_wake(host->board->det_pin);
-+
- if (mmc)
- ret = mmc_resume_host(mmc);
-
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Kconfig linux-2.6-stable/drivers/mtd/devices/Kconfig
---- linux-2.6.21/drivers/mtd/devices/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/devices/Kconfig Tue May 8 14:31:24 2007
-@@ -267,5 +267,11 @@
- LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- you have managed to wipe the first block.
-
--endmenu
-+config MTD_AT91_DATAFLASH
-+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+ help
-+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+ If you have such a board, say 'Y'.
-
-+endmenu
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Makefile linux-2.6-stable/drivers/mtd/devices/Makefile
---- linux-2.6.21/drivers/mtd/devices/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/devices/Makefile Tue May 8 14:31:24 2007
-@@ -17,3 +17,4 @@
- obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/at91_dataflash.c linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.21/drivers/mtd/devices/at91_dataflash.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c Tue May 8 14:31:24 2007
-@@ -0,0 +1,667 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
-+#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */
-+
-+#define OP_READ_CONTINUOUS 0xE8
-+#define OP_READ_PAGE 0xD2
-+#define OP_READ_BUFFER1 0xD4
-+#define OP_READ_BUFFER2 0xD6
-+#define OP_READ_STATUS 0xD7
-+
-+#define OP_ERASE_PAGE 0x81
-+#define OP_ERASE_BLOCK 0x50
-+
-+#define OP_TRANSFER_BUF1 0x53
-+#define OP_TRANSFER_BUF2 0x55
-+#define OP_COMPARE_BUF1 0x60
-+#define OP_COMPARE_BUF2 0x61
-+
-+#define OP_PROGRAM_VIA_BUF1 0x82
-+#define OP_PROGRAM_VIA_BUF2 0x85
-+
-+struct dataflash_local
-+{
-+ int spi; /* SPI chip-select number */
-+
-+ unsigned int page_size; /* number of bytes per page */
-+ unsigned short page_offset; /* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 6 * 32 * 8 * 528, /* 6 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
-+ }
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 4 * 64 * 8 * 528, /* 4 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
-+ }
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ name: "romboot",
-+ offset: 0,
-+ size: 16 * 1056, /* 160 Kb */
-+ mask_flags: MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ name: "uboot",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 128 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "kernel",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 1024 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "filesystem",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#elif defined(CONFIG_MACH_MULTMDP)
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "configuration",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 20 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1520 * 1056,
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
-+ }
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
-+ SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+ If this is not valid, then either (i) each dataflash 'priv' structure
-+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+ another mechanism. */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+ struct spi_transfer_list* list = spi_transfer_desc;
-+
-+ list->tx[0] = tx; list->txlen[0] = tx_len;
-+ list->rx[0] = rx; list->rxlen[0] = rx_len;
-+
-+ list->tx[1] = txnext; list->txlen[1] = txnext_len;
-+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
-+
-+ list->nr_transfers = nr;
-+
-+ return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return;
-+
-+ do {
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ } while ((command[1] & 0x80) == 0);
-+
-+ kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+ unsigned short status;
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return 0;
-+
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ status = command[1];
-+
-+ kfree(command);
-+ return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+ /* Sanity checks */
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+ return -EINVAL;
-+ if ((instr->addr % priv->page_size) != 0)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ while (instr->len > 0) {
-+ /* Calculate flash page address */
-+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+ command[0] = OP_ERASE_PAGE;
-+ command[1] = (pageaddr & 0x00FF0000) >> 16;
-+ command[2] = (pageaddr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+ at91_dataflash_waitready(); /* poll status until ready */
-+ spi_release_bus(priv->spi);
-+
-+ instr->addr += priv->page_size; /* next page */
-+ instr->len -= priv->page_size;
-+ }
-+
-+ kfree(command);
-+
-+ /* Inform MTD subsystem that erase is complete */
-+ instr->state = MTD_ERASE_DONE;
-+ if (instr->callback)
-+ instr->callback(instr);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ * from : Start offset in flash device
-+ * len : Amount to read
-+ * retlen : About of data actually read
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int addr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ /* Calculate flash page/byte address */
-+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+ command = kmalloc(8, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ command[0] = OP_READ_CONTINUOUS;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+ spi_release_bus(priv->spi);
-+
-+ *retlen = len;
-+ kfree(command);
-+ return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ * to : Start offset in flash device
-+ * len : Amount to write
-+ * retlen : Amount of data actually written
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr, addr, offset, writelen;
-+ size_t remaining;
-+ u_char *writebuf;
-+ unsigned short status;
-+ int res = 0;
-+ char* command;
-+ char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ pageaddr = ((unsigned)to / priv->page_size);
-+ offset = ((unsigned)to % priv->page_size);
-+ if (offset + len > priv->page_size)
-+ writelen = priv->page_size - offset;
-+ else
-+ writelen = len;
-+ writebuf = (u_char *)buf;
-+ remaining = len;
-+
-+ /* Allocate temporary buffer */
-+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+ if (!tmpbuf) {
-+ kfree(command);
-+ return -ENOMEM;
-+ }
-+
-+ /* Gain access to the SPI bus */
-+ spi_access_bus(priv->spi);
-+
-+ while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+ /* (1) Transfer to Buffer1 */
-+ if (writelen != priv->page_size) {
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_TRANSFER_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+ }
-+
-+ /* (2) Program via Buffer1 */
-+ addr = (pageaddr << priv->page_offset) + offset;
-+ command[0] = OP_PROGRAM_VIA_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+ at91_dataflash_waitready();
-+
-+ /* (3) Compare to Buffer1 */
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_COMPARE_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+
-+ /* Get result of the compare operation */
-+ status = at91_dataflash_status();
-+ if ((status & 0x40) == 1) {
-+ printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+ remaining = 0;
-+ res = -EIO;
-+ }
-+
-+ remaining = remaining - writelen;
-+ pageaddr++;
-+ offset = 0;
-+ writebuf += writelen;
-+ *retlen += writelen;
-+
-+ if (remaining > priv->page_size)
-+ writelen = priv->page_size;
-+ else
-+ writelen = remaining;
-+ }
-+
-+ /* Release SPI bus */
-+ spi_release_bus(priv->spi);
-+
-+ kfree(tmpbuf);
-+ kfree(command);
-+ return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+ int nr_pages, int pagesize, int pageoffset)
-+{
-+ struct mtd_info *device;
-+ struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *mtd_parts = 0;
-+ int mtd_parts_nr = 0;
-+#endif
-+
-+ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+ return 0;
-+ }
-+
-+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+ if (!device)
-+ return -ENOMEM;
-+ memset(device, 0, sizeof(struct mtd_info));
-+
-+ device->name = (char *)&device[1];
-+ sprintf(device->name, "%s.spi%d", name, channel);
-+ device->size = nr_pages * pagesize;
-+ device->erasesize = pagesize;
-+ device->writesize = pagesize;
-+ device->owner = THIS_MODULE;
-+ device->type = MTD_DATAFLASH;
-+ device->flags = MTD_WRITEABLE;
-+ device->erase = at91_dataflash_erase;
-+ device->read = at91_dataflash_read;
-+ device->write = at91_dataflash_write;
-+
-+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+ if (!priv) {
-+ kfree(device);
-+ return -ENOMEM;
-+ }
-+ memset(priv, 0, sizeof(struct dataflash_local));
-+
-+ priv->spi = channel;
-+ priv->page_size = pagesize;
-+ priv->page_offset = pageoffset;
-+ device->priv = priv;
-+
-+ mtd_devices[nr_devices] = device;
-+ nr_devices++;
-+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+ if (mtd_parts_nr <= 0) {
-+ switch (IDsize) {
-+ case SZ_2M:
-+ mtd_parts = static_partitions_2M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+ break;
-+ case SZ_4M:
-+ mtd_parts = static_partitions_4M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+ break;
-+ case SZ_8M:
-+ mtd_parts = static_partitions_8M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+ break;
-+ }
-+ }
-+
-+ if (mtd_parts_nr > 0) {
-+#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
-+ add_mtd_device(device);
-+#endif
-+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+ }
-+#endif
-+ return add_mtd_device(device); /* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ * Device Density ID code Nr Pages Page Size Page offset
-+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
-+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
-+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
-+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
-+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
-+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
-+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
-+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+ int res = 0;
-+ unsigned short status;
-+
-+ spi_access_bus(channel);
-+ status = at91_dataflash_status();
-+ spi_release_bus(channel);
-+ if (status != 0xff) { /* no dataflash device there */
-+ switch (status & 0x3c) {
-+ case 0x0c: /* 0 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+ break;
-+ case 0x14: /* 0 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+ break;
-+ case 0x1c: /* 0 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+ break;
-+ case 0x24: /* 1 0 0 1 */
-+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+ break;
-+ case 0x2c: /* 1 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+ break;
-+ case 0x34: /* 1 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+ break;
-+ case 0x3c: /* 1 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+ break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+// case 0x10: /* 0 1 0 0 */
-+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+// break;
-+ default:
-+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+ }
-+ }
-+
-+ return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!spi_transfer_desc)
-+ return -ENOMEM;
-+
-+ /* DataFlash (SPI chip select 0) */
-+ at91_dataflash_detect(0);
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card (SPI chip select 3) */
-+ at91_dataflash_detect(3);
-+#endif
-+
-+ return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+ if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+ del_mtd_partitions(mtd_devices[i]);
-+#else
-+ del_mtd_device(mtd_devices[i]);
-+#endif
-+ kfree(mtd_devices[i]->priv);
-+ kfree(mtd_devices[i]);
-+ }
-+ }
-+ nr_devices = 0;
-+ kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN -x CVS linux-2.6.21/drivers/mtd/nand/at91_nand.c linux-2.6-stable/drivers/mtd/nand/at91_nand.c
---- linux-2.6.21/drivers/mtd/nand/at91_nand.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/nand/at91_nand.c Tue May 8 12:13:31 2007
-@@ -82,6 +82,10 @@
- at91_set_gpio_value(host->board->enable_pin, 1);
- }
-
-+#ifdef CONFIG_MTD_PARTITIONS
-+const char *part_probes[] = { "cmdlinepart", NULL };
-+#endif
-+
- /*
- * Probe for the NAND device.
- */
-@@ -151,6 +155,12 @@
- #ifdef CONFIG_MTD_PARTITIONS
- if (host->board->partition_info)
- partitions = host->board->partition_info(mtd->size, &num_partitions);
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ else {
-+ mtd->name = "at91_nand";
-+ num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-+ }
-+#endif
-
- if ((!partitions) || (num_partitions == 0)) {
- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.c linux-2.6-stable/drivers/net/arm/at91_ether.c
---- linux-2.6.21/drivers/net/arm/at91_ether.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/net/arm/at91_ether.c Tue May 8 12:13:31 2007
-@@ -225,6 +225,16 @@
- if (!(phy & ((1 << 2) | 1)))
- goto done;
- }
-+ else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
-+ read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
-+ if (!(phy & ((1 << 2) | 1)))
-+ goto done;
-+ }
-+ else if (lp->phy_type == MII_DP83848_ID) {
-+ read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
-+ if (!(phy & (1 << 7)))
-+ goto done;
-+ }
-
- update_linkspeed(dev, 0);
-
-@@ -280,6 +290,19 @@
- dsintr = (1 << 10) | ( 1 << 8);
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- }
-+ else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
-+ read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
-+ dsintr = dsintr | 0x500; /* set bits 8, 10 */
-+ write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
-+ }
-+ else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
-+ read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
-+ dsintr = dsintr | 0x3c; /* set bits 2..5 */
-+ write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
-+ read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
-+ dsintr = dsintr | 0x3; /* set bits 0,1 */
-+ write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
-+ }
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-@@ -323,6 +346,19 @@
- dsintr = ~((1 << 10) | (1 << 8));
- write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- }
-+ else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
-+ read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
-+ dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
-+ write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
-+ }
-+ else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
-+ read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
-+ dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
-+ write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
-+ read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
-+ dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
-+ write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
-+ }
-
- disable_mdi();
- spin_unlock_irq(&lp->lock);
-@@ -535,8 +571,8 @@
- mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
- }
-
-- at91_emac_write(AT91_EMAC_HSH, mc_filter[0]);
-- at91_emac_write(AT91_EMAC_HSL, mc_filter[1]);
-+ at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
-+ at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
- }
-
- /*
-@@ -943,14 +979,22 @@
- struct net_device *dev;
- struct at91_private *lp;
- unsigned int val;
-- int res;
-+ struct resource *res;
-+ int ret;
-
- dev = alloc_etherdev(sizeof(struct at91_private));
- if (!dev)
- return -ENOMEM;
-
-- dev->base_addr = AT91_VA_BASE_EMAC;
-- dev->irq = AT91RM9200_ID_EMAC;
-+ /* Get I/O base address and IRQ */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ free_netdev(dev);
-+ return -ENODEV;
-+ }
-+ dev->base_addr = res->start;
-+ dev->irq = platform_get_irq(pdev, 0);
-+
- SET_MODULE_OWNER(dev);
-
- /* Install the interrupt handler */
-@@ -1023,12 +1067,12 @@
- lp->phy_address = phy_address; /* MDI address of PHY */
-
- /* Register the network interface */
-- res = register_netdev(dev);
-- if (res) {
-+ ret = register_netdev(dev);
-+ if (ret) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-- return res;
-+ return ret;
- }
-
- /* Determine current link speed */
-@@ -1063,10 +1107,16 @@
- printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
- else if (phy_type == MII_DP83847_ID)
- printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
-+ else if (phy_type == MII_DP83848_ID)
-+ printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- else if (phy_type == MII_AC101L_ID)
- printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
- else if (phy_type == MII_KS8721_ID)
- printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
-+ else if (phy_type == MII_T78Q21x3_ID)
-+ printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
-+ else if (phy_type == MII_LAN83C185_ID)
-+ printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
-
- return 0;
- }
-@@ -1104,8 +1154,11 @@
- case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
- case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
- case MII_DP83847_ID: /* National Semiconductor DP83847: */
-+ case MII_DP83848_ID: /* National Semiconductor DP83848: */
- case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
- case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
-+ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
-+ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
- detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
- break;
- }
-diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.h linux-2.6-stable/drivers/net/arm/at91_ether.h
---- linux-2.6.21/drivers/net/arm/at91_ether.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/net/arm/at91_ether.h Tue May 8 12:13:31 2007
-@@ -17,39 +17,46 @@
-
-
- /* Davicom 9161 PHY */
--#define MII_DM9161_ID 0x0181b880
--#define MII_DM9161A_ID 0x0181b8a0
--
--/* Davicom specific registers */
--#define MII_DSCR_REG 16
--#define MII_DSCSR_REG 17
--#define MII_DSINTR_REG 21
-+#define MII_DM9161_ID 0x0181b880
-+#define MII_DM9161A_ID 0x0181b8a0
-+#define MII_DSCR_REG 16
-+#define MII_DSCSR_REG 17
-+#define MII_DSINTR_REG 21
-
- /* Intel LXT971A PHY */
--#define MII_LXT971A_ID 0x001378E0
--
--/* Intel specific registers */
--#define MII_ISINTE_REG 18
--#define MII_ISINTS_REG 19
--#define MII_LEDCTRL_REG 20
-+#define MII_LXT971A_ID 0x001378E0
-+#define MII_ISINTE_REG 18
-+#define MII_ISINTS_REG 19
-+#define MII_LEDCTRL_REG 20
-
- /* Realtek RTL8201 PHY */
--#define MII_RTL8201_ID 0x00008200
-+#define MII_RTL8201_ID 0x00008200
-
- /* Broadcom BCM5221 PHY */
--#define MII_BCM5221_ID 0x004061e0
--
--/* Broadcom specific registers */
--#define MII_BCMINTR_REG 26
-+#define MII_BCM5221_ID 0x004061e0
-+#define MII_BCMINTR_REG 26
-
- /* National Semiconductor DP83847 */
--#define MII_DP83847_ID 0x20005c30
-+#define MII_DP83847_ID 0x20005c30
-+
-+/* National Semiconductor DP83848 */
-+#define MII_DP83848_ID 0x20005c90
-+#define MII_DPPHYSTS_REG 16
-+#define MII_DPMICR_REG 17
-+#define MII_DPMISR_REG 18
-
- /* Altima AC101L PHY */
--#define MII_AC101L_ID 0x00225520
-+#define MII_AC101L_ID 0x00225520
-
- /* Micrel KS8721 PHY */
--#define MII_KS8721_ID 0x00221610
-+#define MII_KS8721_ID 0x00221610
-+
-+/* Teridian 78Q2123/78Q2133 */
-+#define MII_T78Q21x3_ID 0x000e7230
-+#define MII_T78Q21INT_REG 17
-+
-+/* SMSC LAN83C185 */
-+#define MII_LAN83C185_ID 0x0007C0A0
-
- /* ........................................................................ */
-
-diff -urN -x CVS linux-2.6.21/drivers/pcmcia/at91_cf.c linux-2.6-stable/drivers/pcmcia/at91_cf.c
---- linux-2.6.21/drivers/pcmcia/at91_cf.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/pcmcia/at91_cf.c Tue May 8 12:13:31 2007
-@@ -332,20 +332,27 @@
- struct at91_cf_data *board = cf->board;
-
- pcmcia_socket_dev_suspend(&pdev->dev, mesg);
-+
- if (device_may_wakeup(&pdev->dev)) {
- enable_irq_wake(board->det_pin);
- if (board->irq_pin)
- enable_irq_wake(board->irq_pin);
-- } else {
-- disable_irq_wake(board->det_pin);
-- if (board->irq_pin)
-- disable_irq_wake(board->irq_pin);
- }
-+
- return 0;
- }
-
- static int at91_cf_resume(struct platform_device *pdev)
- {
-+ struct at91_cf_socket *cf = platform_get_drvdata(pdev);
-+ struct at91_cf_data *board = cf->board;
-+
-+ if (device_may_wakeup(&pdev->dev)) {
-+ disable_irq_wake(board->det_pin);
-+ if (board->irq_pin)
-+ disable_irq_wake(board->irq_pin);
-+ }
-+
- pcmcia_socket_dev_resume(&pdev->dev);
- return 0;
- }
-@@ -360,7 +367,6 @@
- .name = (char *) driver_name,
- .owner = THIS_MODULE,
- },
-- .probe = at91_cf_probe,
- .remove = __exit_p(at91_cf_remove),
- .suspend = at91_cf_suspend,
- .resume = at91_cf_resume,
-@@ -370,7 +376,7 @@
-
- static int __init at91_cf_init(void)
- {
-- return platform_driver_register(&at91_cf_driver);
-+ return platform_driver_probe(&at91_cf_driver, at91_cf_probe);
- }
- module_init(at91_cf_init);
-
-diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.c linux-2.6-stable/drivers/serial/atmel_serial.c
---- linux-2.6.21/drivers/serial/atmel_serial.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/serial/atmel_serial.c Tue May 8 12:13:31 2007
-@@ -7,6 +7,8 @@
- * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
-+ * DMA support added by Chip Coldwell.
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -33,6 +35,7 @@
- #include <linux/sysrq.h>
- #include <linux/tty_flip.h>
- #include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
- #include <linux/atmel_pdc.h>
-
- #include <asm/io.h>
-@@ -47,6 +50,11 @@
-
- #include "atmel_serial.h"
-
-+#define SUPPORT_PDC
-+#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
-+#warning "Revisit"
-+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
-+
- #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
- #define SUPPORT_SYSRQ
- #endif
-@@ -107,6 +115,13 @@
- static int (*atmel_open_hook)(struct uart_port *);
- static void (*atmel_close_hook)(struct uart_port *);
-
-+struct atmel_dma_buffer {
-+ unsigned char *buf;
-+ dma_addr_t dma_addr;
-+ size_t dma_size;
-+ unsigned int ofs;
-+};
-+
- /*
- * We wrap our port structure around the generic uart_port.
- */
-@@ -114,10 +129,20 @@
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
-+
-+ short use_dma_rx; /* enable PDC receiver */
-+ short pdc_rx_idx; /* current PDC RX buffer */
-+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
-+
-+ short use_dma_tx; /* enable PDC transmitter */
-+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-
-+#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
-+#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
-+
- #ifdef SUPPORT_SYSRQ
- static struct console atmel_console;
- #endif
-@@ -205,7 +230,12 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IDR(port, ATMEL_US_TXRDY);
-+ if (atmel_port->use_dma_tx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -215,7 +245,17 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IER(port, ATMEL_US_TXRDY);
-+ if (atmel_port->use_dma_tx) {
-+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
-+ /* The transmitter is already running. Yes, we
-+ really need this.*/
-+ return;
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -225,7 +265,12 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IDR(port, ATMEL_US_RXRDY);
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
-+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
- }
-
- /*
-@@ -248,6 +293,134 @@
- }
-
- /*
-+ * Receive data via the PDC. A buffer has been fulled.
-+ */
-+static void atmel_pdc_endrx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ unsigned int count;
-+
-+ count = pdc->dma_size - pdc->ofs;
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ port->icount.rx += count;
-+ }
-+
-+ /* Set this buffer as the next receive buffer */
-+ pdc->ofs = 0;
-+ UART_PUT_RNPR(port, pdc->dma_addr);
-+ UART_PUT_RNCR(port, pdc->dma_size);
-+
-+ /* Switch to next buffer */
-+ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
-+}
-+
-+/*
-+ * Receive data via the PDC. At least one byte was received, but the
-+ * buffer was not full when the inter-character timeout expired.
-+ */
-+static void atmel_pdc_timeout(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ /* unsigned */ int ofs, count;
-+
-+ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
-+ count = ofs - pdc->ofs;
-+
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ pdc->ofs = ofs;
-+ port->icount.rx += count;
-+ }
-+
-+ /* reset the UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+}
-+
-+/*
-+ * Deal with parity, framing and overrun errors.
-+ */
-+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
-+{
-+ /* clear error */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+
-+ if (status & ATMEL_US_RXBRK) {
-+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
-+ port->icount.brk++;
-+ }
-+ if (status & ATMEL_US_PARE)
-+ port->icount.parity++;
-+ if (status & ATMEL_US_FRAME)
-+ port->icount.frame++;
-+ if (status & ATMEL_US_OVRE)
-+ port->icount.overrun++;
-+}
-+
-+/*
-+ * A transmission via the PDC is complete.
-+ */
-+static void atmel_pdc_endtx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ xmit->tail += pdc->ofs;
-+ if (xmit->tail >= SERIAL_XMIT_SIZE)
-+ xmit->tail -= SERIAL_XMIT_SIZE;
-+
-+ port->icount.tx += pdc->ofs;
-+ pdc->ofs = 0;
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+}
-+
-+/*
-+ * The PDC transmitter is idle, so either start the next transfer or
-+ * disable the transmitter.
-+ */
-+static void atmel_pdc_txbufe(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ int count;
-+
-+ if (!uart_circ_empty(xmit)) {
-+ /* more to transmit - setup next transfer */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+
-+ if (xmit->tail < xmit->head)
-+ count = xmit->head - xmit->tail;
-+ else
-+ count = SERIAL_XMIT_SIZE - xmit->tail;
-+ pdc->ofs = count;
-+
-+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
-+ UART_PUT_TCR(port, count);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else {
-+ /* nothing left to transmit - disable the transmitter */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+}
-+
-+/*
- * Characters received (called from interrupt handler)
- */
- static void atmel_rx_chars(struct uart_port *port)
-@@ -349,6 +522,14 @@
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- while (pending) {
-+ /* PDC receive */
-+ if (pending & ATMEL_US_ENDRX)
-+ atmel_pdc_endrx(port);
-+ if (pending & ATMEL_US_TIMEOUT)
-+ atmel_pdc_timeout(port);
-+ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
-+ atmel_pdc_rxerr(port, pending);
-+
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-@@ -363,6 +544,12 @@
- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
-
-+ /* PDC transmit */
-+ if (pending & ATMEL_US_ENDTX)
-+ atmel_pdc_endtx(port);
-+ if (pending & ATMEL_US_TXBUFE)
-+ atmel_pdc_txbufe(port);
-+
- /* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY)
- atmel_tx_chars(port);
-@@ -401,6 +588,47 @@
- }
-
- /*
-+ * Initialize DMA (if necessary)
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
-+ if (pdc->buf == NULL) {
-+ if (i != 0) {
-+ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ kfree(atmel_port->pdc_rx[0].buf);
-+ }
-+ free_irq(port->irq, port);
-+ return -ENOMEM;
-+ }
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ pdc->dma_size = PDC_BUFFER_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ atmel_port->pdc_rx_idx = 0;
-+
-+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
-+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
-+
-+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
-+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ struct circ_buf *xmit = &port->info->xmit;
-+
-+ pdc->buf = xmit->buf;
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
-+ pdc->dma_size = SERIAL_XMIT_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
-@@ -418,7 +646,15 @@
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
-
-- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-
- return 0;
- }
-@@ -431,6 +667,31 @@
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
- /*
-+ * Ensure everything is stopped.
-+ */
-+ atmel_stop_rx(port);
-+ atmel_stop_tx(port);
-+
-+ /*
-+ * Shut-down the DMA.
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ kfree(pdc->buf);
-+ }
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+ }
-+
-+ /*
- * Disable all interrupts, port and break condition.
- */
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
-@@ -481,14 +742,20 @@
- */
- static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
-+ /* Get current mode register */
-+ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
-- /* Get current mode register */
-- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
-+ quot /= 8;
-+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
-+ }
-
- /* byte size */
- switch (termios->c_cflag & CSIZE) {
-@@ -534,6 +801,9 @@
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= ATMEL_US_RXBRK;
-
-+ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
-+ UART_PUT_IER(port, port->read_status_mask);
-+
- /*
- * Characters to ignore
- */
-@@ -712,6 +982,13 @@
- clk_enable(atmel_port->clk);
- port->uartclk = clk_get_rate(atmel_port->clk);
- }
-+
-+#ifdef SUPPORT_PDC
-+ atmel_port->use_dma_rx = data->use_dma_rx;
-+ atmel_port->use_dma_tx = data->use_dma_tx;
-+ if (atmel_port->use_dma_tx)
-+ port->fifosize = PDC_BUFFER_SIZE;
-+#endif
- }
-
- /*
-@@ -888,7 +1165,8 @@
- struct uart_port *port = platform_get_drvdata(pdev);
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
-+ if (device_may_wakeup(&pdev->dev)
-+ && !clk_must_disable(atmel_port->clk))
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
-diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.h linux-2.6-stable/drivers/serial/atmel_serial.h
---- linux-2.6.21/drivers/serial/atmel_serial.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/serial/atmel_serial.h Tue May 8 12:13:31 2007
-@@ -46,6 +46,9 @@
- #define ATMEL_US_USMODE_ISO7816_T1 6
- #define ATMEL_US_USMODE_IRDA 8
- #define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
-+#define ATMEL_US_USCLKS_MCK (0 << 4)
-+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
-+#define ATMEL_US_USCLKS_SCK (3 << 4)
- #define ATMEL_US_CHRL (3 << 6) /* Character Length */
- #define ATMEL_US_CHRL_5 (0 << 6)
- #define ATMEL_US_CHRL_6 (1 << 6)
-diff -urN -x CVS linux-2.6.21/drivers/spi/Kconfig linux-2.6-stable/drivers/spi/Kconfig
---- linux-2.6.21/drivers/spi/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/spi/Kconfig Tue May 8 14:31:24 2007
-@@ -54,6 +54,7 @@
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32) && SPI_MASTER
-+ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
- help
- This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
-@@ -82,6 +83,24 @@
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
-
-+config SPI_AT91
-+ tristate "AT91RM9200 Bitbang SPI Master"
-+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+ select SPI_BITBANG
-+ select SPI_AT91_MANUAL_CS
-+ help
-+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+ The SPI_ATMEL driver will be its replacement, using the native
-+ SPI hardware and its DMA controller.
-+
-+config SPI_AT91_MANUAL_CS
-+ bool
-+ depends on ARCH_AT91RM9200
-+ help
-+ Works around an AT91RM9200 problem whereby the SPI chip-select
-+ will be wrongly disabled. The workaround uses those pins as
-+ GPIOs instead of letting the SPI controller manage them.
-+
- config SPI_IMX
- tristate "Freescale iMX SPI controller"
- depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN -x CVS linux-2.6.21/drivers/spi/Makefile linux-2.6-stable/drivers/spi/Makefile
---- linux-2.6.21/drivers/spi/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/spi/Makefile Tue May 8 14:31:24 2007
-@@ -20,6 +20,7 @@
- obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
-+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
-diff -urN -x CVS linux-2.6.21/drivers/spi/spi_at91_bitbang.c linux-2.6-stable/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.21/drivers/spi/spi_at91_bitbang.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/spi/spi_at91_bitbang.c Tue May 8 14:31:24 2007
-@@ -0,0 +1,207 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ * - other at91 parts (like at91sam9) have multiple controllers
-+ * and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ * - rm9200 spi chipselects drop wrongly, so the native driver
-+ * will need to use gpios much like this does.
-+ *
-+ * - real hardware only allows 8..16 bits per word, while this
-+ * bitbanger allows 1..32 (incompatible superset).
-+ *
-+ * - this disregards clock parameters. with inlined gpio calls,
-+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ * than using the subroutined veresion from txrx_word().
-+ *
-+ * - suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define spi_miso_bit AT91_PIN_PA0
-+#define spi_mosi_bit AT91_PIN_PA1
-+#define spi_sck_bit AT91_PIN_PA2
-+
-+struct at91_spi {
-+ struct spi_bitbang bitbang;
-+ struct platform_device *pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+ return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+ unsigned long cs = (unsigned long) spi->controller_data;
-+
-+ /* set default clock polarity */
-+ if (is_active)
-+ setsck(spi, spi->mode & SPI_CPOL);
-+
-+ /* only support active-low (default) */
-+ at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE: this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define spidelay(X) do{} while(0)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct spi_master *master;
-+ struct at91_spi *at91_spi;
-+
-+ if (pdev->id != 0) /* SPI0 bus */
-+ return -EINVAL;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+ if (!master)
-+ return -ENOMEM;
-+
-+ at91_spi = spi_master_get_devdata(master);
-+ at91_spi->pdev = pdev;
-+ platform_set_drvdata(pdev, at91_spi);
-+
-+ /* SPI and bitbang hookup */
-+ master->bus_num = 0;
-+ master->num_chipselect = 4;
-+
-+ at91_spi->bitbang.master = spi_master_get(master);
-+ at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+ status = spi_bitbang_start(&at91_spi->bitbang);
-+ if (status < 0)
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
-+ int status;
-+
-+ /* stop() unregisters child devices too */
-+ status = spi_bitbang_stop(&at91_spi->bitbang);
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+ .probe = at91_spi_probe,
-+ .remove = __exit_p(at91_spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+ at91_set_gpio_output(spi_sck_bit, 0);
-+ at91_set_gpio_output(spi_mosi_bit, 0);
-+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+ /* register driver */
-+ return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+ platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/Kconfig linux-2.6-stable/drivers/usb/gadget/Kconfig
---- linux-2.6.21/drivers/usb/gadget/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/gadget/Kconfig Wed May 9 10:20:54 2007
-@@ -189,7 +189,7 @@
-
- config USB_GADGET_AT91
- boolean "AT91 USB Device Port"
-- depends on ARCH_AT91
-+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL
- select USB_GADGET_SELECTED
- help
- Many Atmel AT91 processors (such as the AT91RM2000) have a
-diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/at91_udc.c linux-2.6-stable/drivers/usb/gadget/at91_udc.c
---- linux-2.6.21/drivers/usb/gadget/at91_udc.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/gadget/at91_udc.c Tue May 8 12:13:31 2007
-@@ -1804,7 +1804,7 @@
- */
- if ((!udc->suspended && udc->addr)
- || !wake
-- || at91_suspend_entering_slow_clock()) {
-+ || clk_must_disable(udc->fclk)) {
- pullup(udc, 0);
- wake = 0;
- } else
-diff -urN -x CVS linux-2.6.21/drivers/usb/host/ohci-at91.c linux-2.6-stable/drivers/usb/host/ohci-at91.c
---- linux-2.6.21/drivers/usb/host/ohci-at91.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/host/ohci-at91.c Tue May 8 12:13:31 2007
-@@ -299,7 +299,7 @@
- *
- * REVISIT: some boards will be able to turn VBUS off...
- */
-- if (at91_suspend_entering_slow_clock()) {
-+ if (clk_must_disable(fclk)) {
- ohci_usb_reset (ohci);
- at91_stop_clock();
- }
-diff -urN -x CVS linux-2.6.21/drivers/video/Kconfig linux-2.6-stable/drivers/video/Kconfig
---- linux-2.6.21/drivers/video/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/Kconfig Thu May 10 12:34:41 2007
-@@ -663,6 +663,17 @@
- framebuffer. Product specs at
- <http://www.erd.epson.com/vdc/html/products.htm>.
-
-+config FB_S1D15605
-+ tristate "Epson S1D15605 framebuffer support"
-+ depends on FB
-+ default m if MACH_KB9200
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ Build in support for the S1D15605 Epson Research 128x64
-+ LCD controller as a framebuffer.
-+
- config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
-@@ -674,6 +685,22 @@
- working with S1D13806). Product specs at
- <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
-
-+config FB_ATMEL
-+ tristate "AT91/AT32 LCD Controller support"
-+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32)
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This enables support for the AT91/AT32 LCD Controller.
-+
-+config FB_INTSRAM
-+ bool "Frame Buffer in internal SRAM"
-+ depends on FB_ATMEL && ARCH_AT91SAM9261
-+ help
-+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-+ to let frame buffer in external SDRAM.
-+
- config FB_NVIDIA
- tristate "nVidia Framebuffer Support"
- depends on FB && PCI
-diff -urN -x CVS linux-2.6.21/drivers/video/Makefile linux-2.6-stable/drivers/video/Makefile
---- linux-2.6.21/drivers/video/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/Makefile Thu May 10 12:34:01 2007
-@@ -75,6 +75,8 @@
- obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
-+obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN -x CVS linux-2.6.21/drivers/video/atmel_lcdfb.c linux-2.6-stable/drivers/video/atmel_lcdfb.c
---- linux-2.6.21/drivers/video/atmel_lcdfb.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/atmel_lcdfb.c Thu May 10 12:34:01 2007
-@@ -0,0 +1,752 @@
-+/*
-+ * Driver for AT91/AT32 LCD Controller
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-+#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
-+
-+/* configurable parameters */
-+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-+#define ATMEL_LCDC_DMA_BURST_LEN 8
-+
-+#if defined(CONFIG_ARCH_AT91SAM9263)
-+#define ATMEL_LCDC_FIFO_SIZE 2048
-+#else
-+#define ATMEL_LCDC_FIFO_SIZE 512
-+#endif
-+
-+#if defined(CONFIG_ARCH_AT91)
-+#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+
-+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+ struct fb_var_screeninfo *var)
-+{
-+
-+}
-+#elif defined(CONFIG_AVR32)
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
-+
-+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+ struct fb_var_screeninfo *var)
-+{
-+ u32 dma2dcfg;
-+ u32 pixeloff;
-+
-+ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
-+
-+ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
-+ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
-+
-+ /* Update configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
-+ lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
-+ | ATMEL_LCDC_DMAUPDT);
-+}
-+#endif
-+
-+
-+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+
-+static void atmel_lcdfb_update_dma(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ unsigned long dma_addr;
-+
-+ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+ + var->xoffset * var->bits_per_pixel / 8);
-+
-+ dma_addr &= ~3UL;
-+
-+ /* Set framebuffer DMA base address and pixel offset */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-+
-+ atmel_lcdfb_update_dma2d(sinfo, var);
-+}
-+
-+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+
-+ dma_free_writecombine(info->device, info->fix.smem_len,
-+ info->screen_base, info->fix.smem_start);
-+}
-+
-+/**
-+ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
-+ * @sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_var_screeninfo *var = &info->var;
-+
-+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
-+
-+ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
-+ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
-+
-+ if (!info->screen_base) {
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_lcdfb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct atmel_lcdfb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ struct device *dev = info->device;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long clk_value_khz;
-+
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+ dev_dbg(dev, "%s:\n", __func__);
-+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
-+ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
-+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
-+ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
-+
-+ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
-+ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
-+ return -EINVAL;
-+ }
-+
-+ /* Force same alignment for each line */
-+ var->xres = (var->xres + 3) & ~3UL;
-+ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
-+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+ var->xoffset = var->yoffset = 0;
-+
-+ switch (var->bits_per_pixel) {
-+ case 2:
-+ case 4:
-+ case 8:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ case 15:
-+ case 16:
-+ var->red.offset = 0;
-+ var->green.offset = 5;
-+ var->blue.offset = 10;
-+ var->red.length = var->green.length = var->blue.length = 5;
-+ break;
-+ case 24:
-+ case 32:
-+ var->red.offset = 0;
-+ var->green.offset = 8;
-+ var->blue.offset = 16;
-+ var->red.length = var->green.length = var->blue.length = 8;
-+ break;
-+ default:
-+ dev_err(dev, "color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * atmel_lcdfb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. atmel_lcdfb_check_var is always called
-+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_lcdfb_set_par(struct fb_info *info)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long value;
-+ unsigned long clk_value_khz;
-+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ /* Turn off the LCD controller and the DMA controller */
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-+
-+ if (info->var.bits_per_pixel <= 8)
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ else
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+
-+ /* Re-initialize the DMA engine... */
-+ dev_dbg(info->device, " * update DMA engine\n");
-+ atmel_lcdfb_update_dma(info, &info->var);
-+
-+ /* ...set frame size and burst length = 8 words (?) */
-+ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
-+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
-+
-+ /* Now, the LCDC core... */
-+
-+ /* Set pixel clock */
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
-+
-+ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-+ value++;
-+
-+ value = (value / 2) - 1;
-+
-+ if (value <= 0) {
-+ dev_notice(info->device, "Bypassing pixel clock divider\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-+ } else
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+
-+ /* Initialize control register 2 */
-+ value = sinfo->default_lcdcon2;
-+
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVLINE_INVERTED;
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
-+
-+ switch (info->var.bits_per_pixel) {
-+ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
-+ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
-+ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
-+ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
-+ case 15: /* fall through */
-+ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
-+ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
-+ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
-+ default: BUG(); break;
-+ }
-+ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-+
-+ /* Vertical timing */
-+ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
-+ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
-+ value |= info->var.lower_margin;
-+ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-+
-+ /* Horizontal timing */
-+ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
-+ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
-+ value |= (info->var.left_margin - 1);
-+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-+
-+ /* Display size */
-+ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+ value |= info->var.yres - 1;
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-+
-+ /* FIFO Threshold: Use formula from data sheet */
-+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
-+ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-+
-+ /* Toggle LCD_MODE every frame */
-+ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-+
-+ /* Disable all interrupts */
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-+
-+ /* Set contrast */
-+ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-+ /* ...wait for DMA engine to become idle... */
-+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-+ msleep(10);
-+
-+ dev_dbg(info->device, " * re-enable DMA engine\n");
-+ /* ...and enable it with updated configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-+
-+ dev_dbg(info->device, " * re-enable LCDC core\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-+
-+ dev_dbg(info->device, " * DONE\n");
-+
-+ return 0;
-+}
-+
-+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
-+{
-+ chan &= 0xffff;
-+ chan >>= 16 - bf->length;
-+ return chan << bf->offset;
-+}
-+
-+/**
-+ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
-+ * @regno: Which register in the CLUT we are programming
-+ * @red: The red value which can be up to 16 bits wide
-+ * @green: The green value which can be up to 16 bits wide
-+ * @blue: The blue value which can be up to 16 bits wide.
-+ * @transp: If supported the alpha value which can be up to 16 bits wide.
-+ * @info: frame buffer info structure
-+ *
-+ * Set a single color register. The values supplied have a 16 bit
-+ * magnitude which needs to be scaled in this function for the hardware.
-+ * Things to take into consideration are how many color registers, if
-+ * any, are supported with the current color visual. With truecolor mode
-+ * no color palettes are supported. Here a psuedo palette is created
-+ * which we store the value in pseudo_palette in struct fb_info. For
-+ * pseudocolor mode we have a limited color palette. To deal with this
-+ * we can program what color is displayed for a particular pixel value.
-+ * DirectColor is similar in that we can program each color field. If
-+ * we have a static colormap we don't need to implement this function.
-+ *
-+ * Returns negative errno on error, or zero on success. In an
-+ * ideal world, this would have been the case, but as it turns
-+ * out, the other drivers return 1 on failure, so that's what
-+ * we're going to do.
-+ */
-+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
-+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned int val;
-+ u32 *pal;
-+ int ret = 1;
-+
-+ if (info->var.grayscale)
-+ red = green = blue = (19595 * red + 38470 * green
-+ + 7471 * blue) >> 16;
-+
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ if (regno < 16) {
-+ pal = info->pseudo_palette;
-+
-+ val = chan_to_field(red, &info->var.red);
-+ val |= chan_to_field(green, &info->var.green);
-+ val |= chan_to_field(blue, &info->var.blue);
-+
-+ pal[regno] = val;
-+ ret = 0;
-+ }
-+ break;
-+
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ if (regno < 256) {
-+ val = ((red >> 11) & 0x001f);
-+ val |= ((green >> 6) & 0x03e0);
-+ val |= ((blue >> 1) & 0x7c00);
-+
-+ /*
-+ * TODO: intensity bit. Maybe something like
-+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
-+ */
-+
-+ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+ ret = 0;
-+ }
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ dev_dbg(info->device, "%s\n", __func__);
-+
-+ atmel_lcdfb_update_dma(info, var);
-+
-+ return 0;
-+}
-+
-+static struct fb_ops atmel_lcdfb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = atmel_lcdfb_check_var,
-+ .fb_set_par = atmel_lcdfb_set_par,
-+ .fb_setcolreg = atmel_lcdfb_setcolreg,
-+ .fb_pan_display = atmel_lcdfb_pan_display,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
-+
-+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
-+{
-+ struct fb_info *info = dev_id;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ u32 status;
-+
-+ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ int ret = 0;
-+
-+ memset_io(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ /* Allocate colormap */
-+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
-+ if (ret < 0)
-+ dev_err(info->device, "Alloc color map failed\n");
-+
-+ return ret;
-+}
-+
-+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+ if (sinfo->bus_clk)
-+ clk_enable(sinfo->bus_clk);
-+ clk_enable(sinfo->lcdc_clk);
-+}
-+
-+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+ if (sinfo->bus_clk)
-+ clk_disable(sinfo->bus_clk);
-+ clk_disable(sinfo->lcdc_clk);
-+}
-+
-+
-+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct atmel_lcdfb_info *sinfo;
-+ struct atmel_lcdfb_info *pdata_sinfo;
-+ struct resource *regs = NULL;
-+ struct resource *map = NULL;
-+ int ret;
-+
-+ dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
-+ if (!info) {
-+ dev_err(dev, "cannot allocate memory\n");
-+ goto out;
-+ }
-+
-+ sinfo = info->par;
-+
-+ if (dev->platform_data) {
-+ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
-+ sinfo->default_bpp = pdata_sinfo->default_bpp;
-+ sinfo->default_dmacon = pdata_sinfo->default_dmacon;
-+ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
-+ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
-+ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
-+ sinfo->guard_time = pdata_sinfo->guard_time;
-+ } else {
-+ dev_err(dev, "cannot get default configuration\n");
-+ goto free_info;
-+ }
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ strcpy(info->fix.id, sinfo->pdev->name);
-+ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
-+ info->pseudo_palette = sinfo->pseudo_palette;
-+ info->fbops = &atmel_lcdfb_ops;
-+
-+ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+ info->fix = atmel_lcdfb_fix;
-+
-+ /* Enable LCDC Clocks */
-+ if (cpu_is_at91sam9261() {
-+ sinfo->bus_clk = clk_get(dev, "hck1");
-+ if (IS_ERR(sinfo->bus_clk)) {
-+ ret = PTR_ERR(sinfo->bus_clk);
-+ goto free_info;
-+ }
-+ }
-+ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
-+ if (IS_ERR(sinfo->lcdc_clk)) {
-+ ret = PTR_ERR(sinfo->lcdc_clk);
-+ goto put_bus_clk;
-+ }
-+ atmel_lcdfb_start_clock(sinfo);
-+
-+ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ info->monspecs.modedb_len, info->monspecs.modedb,
-+ sinfo->default_bpp);
-+ if (!ret) {
-+ dev_err(dev, "no suitable video mode found\n");
-+ goto stop_clk;
-+ }
-+
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(dev, "resources unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+ if (sinfo->irq_base < 0) {
-+ dev_err(dev, "unable to get irq\n");
-+ ret = sinfo->irq_base;
-+ goto stop_clk;
-+ }
-+
-+ /* Initialize video memory */
-+ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (map) {
-+ /* use a pre-allocated memory buffer */
-+ info->fix.smem_start = map->start;
-+ info->fix.smem_len = map->end - map->start + 1;
-+ if (!request_mem_region(info->fix.smem_start,
-+ info->fix.smem_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto stop_clk;
-+ }
-+
-+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
-+ if (!info->screen_base)
-+ goto release_intmem;
-+ } else {
-+ /* alocate memory buffer */
-+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
-+ goto stop_clk;
-+ }
-+ }
-+
-+ /* LCDC registers */
-+ info->fix.mmio_start = regs->start;
-+ info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "cannot map LCDC registers\n");
-+ goto release_mem;
-+ }
-+
-+ /* interrupt */
-+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
-+ if (ret) {
-+ dev_err(dev, "request_irq failed: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ ret = atmel_lcdfb_init_fbinfo(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "init fbinfo failed: %d\n", ret);
-+ goto unregister_irqs;
-+ }
-+
-+ /*
-+ * This makes sure that our colour bitfield
-+ * descriptors are correctly initialised.
-+ */
-+ atmel_lcdfb_check_var(&info->var, info);
-+
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "unable to set display parameters\n");
-+ goto free_cmap;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-+ goto free_cmap;
-+ }
-+
-+ /* Power up the LCDC screen */
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(1);
-+
-+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
-+
-+ return 0;
-+
-+
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ if (map)
-+ iounmap(info->screen_base);
-+ else
-+ atmel_lcdfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+ if (map)
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+ atmel_lcdfb_stop_clock(sinfo);
-+ clk_put(sinfo->lcdc_clk);
-+put_bus_clk:
-+ if (sinfo->bus_clk)
-+ clk_put(sinfo->bus_clk);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(0);
-+ unregister_framebuffer(info);
-+ atmel_lcdfb_stop_clock(sinfo);
-+ clk_put(sinfo->lcdc_clk);
-+ if (sinfo->bus_clk)
-+ clk_put(sinfo->bus_clk);
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+ iounmap(info->screen_base);
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+ } else {
-+ atmel_lcdfb_free_video_memory(sinfo);
-+ }
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+ .remove = __exit_p(atmel_lcdfb_remove),
-+ .driver = {
-+ .name = "atmel_lcdfb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init atmel_lcdfb_init(void)
-+{
-+ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
-+}
-+
-+static void __exit atmel_lcdfb_exit(void)
-+{
-+ platform_driver_unregister(&atmel_lcdfb_driver);
-+}
-+
-+module_init(atmel_lcdfb_init);
-+module_exit(atmel_lcdfb_exit);
-+
-+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Kconfig linux-2.6-stable/drivers/video/backlight/Kconfig
---- linux-2.6.21/drivers/video/backlight/Kconfig Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/backlight/Kconfig Tue May 8 12:13:31 2007
-@@ -63,3 +63,11 @@
- help
- If you have a Frontpath ProGear say Y to enable the
- backlight driver.
-+
-+config BACKLIGHT_KB920x
-+ tristate "KwikByte KB9202 Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
-+ default y
-+ help
-+ If you have a KwikByte KB9202 board, say Y to enable the
-+ backlight driver.
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Makefile linux-2.6-stable/drivers/video/backlight/Makefile
---- linux-2.6.21/drivers/video/backlight/Makefile Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/backlight/Makefile Tue May 8 12:13:31 2007
-@@ -6,3 +6,4 @@
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
-+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/kb920x_bl.c linux-2.6-stable/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.21/drivers/video/backlight/kb920x_bl.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/backlight/kb920x_bl.c Tue May 8 12:13:31 2007
-@@ -0,0 +1,164 @@
-+/*
-+ * Backlight Driver for KB9202
-+ *
-+ * Copyright (c) 2006 KwikByte
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+/* The backlight is on(1)/off(0) */
-+#define KB9202_DEFAULT_INTENSITY 1
-+#define KB9202_MAX_INTENSITY 1
-+
-+static int kb9202bl_suspended;
-+static int current_intensity = 0;
-+static DEFINE_SPINLOCK(bl_lock);
-+
-+static int kb9202bl_set_intensity(struct backlight_device *bd)
-+{
-+ unsigned long flags;
-+ int intensity = bd->props.brightness;
-+
-+ if (bd->props.power != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (kb9202bl_suspended)
-+ intensity = 0;
-+
-+ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
-+ intensity = 1;
-+
-+ spin_lock_irqsave(&bl_lock, flags);
-+ if (intensity)
-+ gpio_set_value(AT91_PIN_PC23, 1);
-+ else
-+ gpio_set_value(AT91_PIN_PC23, 0);
-+ spin_unlock_irqrestore(&bl_lock, flags);
-+
-+ current_intensity = intensity;
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_get_intensity(struct backlight_device *bd)
-+{
-+ return current_intensity;
-+}
-+
-+static struct backlight_ops kb9202bl_ops = {
-+ .get_brightness = kb9202bl_get_intensity,
-+ .update_status = kb9202bl_set_intensity,
-+};
-+
-+static int __init kb9202bl_probe(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd;
-+
-+ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
-+ if (IS_ERR(bd))
-+ return PTR_ERR(bd);
-+
-+ platform_set_drvdata(pdev, bd);
-+
-+ bd->props.max_brightness = KB9202_MAX_INTENSITY;
-+ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_remove(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ bd->props.brightness = 0;
-+ bd->props.power = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ backlight_device_unregister(bd);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 1;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+
-+static int kb9202bl_resume(struct platform_device *dev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+#else
-+#define kb9202bl_suspend NULL
-+#define kb9202bl_resume NULL
-+#endif
-+
-+static struct platform_driver kb9202bl_driver = {
-+ .probe = kb9202bl_probe,
-+ .remove = kb9202bl_remove,
-+ .suspend = kb9202bl_suspend,
-+ .resume = kb9202bl_resume,
-+ .driver = {
-+ .name = "kb9202-bl",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static struct platform_device *kb9202bl_device;
-+
-+static int __init kb9202bl_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&kb9202bl_driver);
-+ if (!ret) {
-+ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
-+ if (!kb9202bl_device)
-+ return -ENOMEM;
-+
-+ ret = platform_device_add(kb9202bl_device);
-+ if (ret) {
-+ platform_device_put(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __exit kb9202bl_exit(void)
-+{
-+ platform_device_unregister(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+}
-+
-+module_init(kb9202bl_init);
-+module_exit(kb9202bl_exit);
-+
-+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
-+MODULE_DESCRIPTION("KB9202 Backlight Driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/video/s1d15605fb.c linux-2.6-stable/drivers/video/s1d15605fb.c
---- linux-2.6.21/drivers/video/s1d15605fb.c Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/s1d15605fb.c Tue May 8 12:13:31 2007
-@@ -0,0 +1,659 @@
-+/*
-+ * drivers/video/s1d15605.c
-+ *
-+ * Adapted from several sources including:
-+ * 1) Driver for AT91 LCD Controller
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * 2) Copyright (C) 2005 S. Kevin Hester
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
-+ * display. This display uses a clone of the common Epson SED 1531 display
-+ * controller.
-+ *
-+ * I've heavily borrowed code from the vfb.c driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifdef DEBUG
-+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
-+#else
-+#define MSG(string, args...)
-+#endif
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+#include <asm/backlight.h>
-+#endif
-+
-+#define VIDEOWIDTH 128
-+#define VIDEOHEIGHT 64
-+#define VIDEODEPTH 1 /* bits/pixel */
-+#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
-+
-+/* The number of bytes that actually go to the device */
-+#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
-+#define VIDEOMEMSIZE PAGE_SIZE
-+
-+static struct fb_var_screeninfo s1d15605_default __initdata = {
-+ .xres = VIDEOWIDTH,
-+ .yres = VIDEOHEIGHT,
-+ .xres_virtual = VIDEOWIDTH,
-+ .yres_virtual = VIDEOHEIGHT,
-+ .bits_per_pixel = VIDEODEPTH,
-+ .red = { 0, 1, 0 },
-+ .green = { 0, 1, 0 },
-+ .blue = { 0, 1, 0 },
-+ .activate = FB_ACTIVATE_NOW,
-+ .pixclock = 20000,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
-+ .id = "s1d15605",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_MONO10,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+struct s1d15605fb_info {
-+ struct fb_info *info;
-+ char *mmio;
-+ unsigned long reset_pin;
-+ struct platform_device *pdev;
-+};
-+
-+/*
-+ * LCD device interface
-+ */
-+#define RESET_DISPLAY 0xE2
-+#define LCD_BIAS_1_9 0xA2
-+#define ADC_SELECT_REVERSE 0xA1
-+#define COMMON_OUTPUT_NORMAL 0xC0
-+#define V5_RESISTOR_RATIO 0x26
-+#define ELECTRONIC_VOLUME_SET 0x81
-+#define ELECTRONIC_VOLUME_INIT 0x20
-+#define POWER_CONTROL_SET 0x28
-+#define VOLTAGE_REGULATOR 0x02
-+#define VOLTAGE_FOLLOWER 0x01
-+#define BOOSTER_CIRCUIT 0x04
-+#define DISPLAY_ON 0xAF
-+#define START_LINE_SET 0x40
-+#define PAGE_ADDRESS_SET 0xB0
-+#define COLUMN_ADDRESS_HIGH 0x10
-+#define COLUMN_ADDRESS_LOW 0x00
-+#define RESISTOR_RATIO_START 0x20
-+
-+#define NUM_OF_PAGES 8
-+#define NUM_OF_COLUMNS 128
-+
-+#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
-+#define READ_COMMAND __raw_readb((sinfo)->mmio)
-+#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
-+#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
-+
-+
-+/*
-+ * s1d15605fb_resize_framebuffer
-+ *
-+ * Free allocated space if different. Allocate on new of changed.
-+ * Returns -ENOMEM if the new framebuffer can not be allocated,
-+ * zero on success.
-+ */
-+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ struct fb_var_screeninfo *var = &info->var;
-+ unsigned int new_size;
-+ void *new_vaddr;
-+
-+ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
-+
-+ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
-+ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
-+
-+ if (new_size == fix->smem_len)
-+ return 0;
-+
-+ if (fix->smem_len) {
-+ kfree(info->screen_base);
-+ }
-+
-+ new_vaddr = kmalloc(new_size, GFP_KERNEL);
-+
-+ if (!new_vaddr) {
-+ fix->smem_len = 0;
-+ return -ENOMEM;
-+ }
-+
-+ info->screen_base = new_vaddr;
-+ fix->smem_start = (unsigned)new_vaddr;
-+ fix->smem_len = new_size;
-+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
-+ * bottom) each page seems to be eight pixels high, where these eight pixels are
-+ * one byte
-+ */
-+static void s1d15605_update(struct fb_info *info)
-+{
-+ struct s1d15605fb_info *sinfo = info->par;
-+ int page, i, row, colmask;
-+ u8 retVal, *rowPtr;
-+
-+ WRITE_COMMAND(START_LINE_SET);
-+ for (page = 0; page < NUM_OF_PAGES; ++page) {
-+ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
-+ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
-+ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
-+
-+ for (i = 0; i < NUM_OF_COLUMNS; ++i)
-+ {
-+ /* point of opportunity: optimization */
-+ colmask = (1 << (i & 0x7));
-+ rowPtr = (u8*)(info->screen_base);
-+ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
-+ rowPtr += (i >> 3);
-+ retVal = 0;
-+ for (row = 0; row < 8; ++row)
-+ {
-+ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
-+ rowPtr += VIDEOWIDTH_BYTES;
-+ }
-+ WRITE_DATA(retVal);
-+ }
-+ }
-+
-+ WRITE_COMMAND(DISPLAY_ON);
-+}
-+
-+
-+/*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+ /*
-+ * Some very basic checks
-+ */
-+ if (!var->xres)
-+ var->xres = 1;
-+ if (!var->yres)
-+ var->yres = 1;
-+ if (var->xres > var->xres_virtual)
-+ var->xres_virtual = var->xres;
-+ if (var->yres > var->yres_virtual)
-+ var->yres_virtual = var->yres;
-+
-+ if(var->bits_per_pixel > VIDEODEPTH)
-+ return -EINVAL;
-+
-+ /*
-+ * Memory limit
-+ */
-+ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
-+ ACTUALVIDEOMEMSIZE)
-+ return -ENOMEM;
-+
-+ /*
-+ * Now that we checked it we alter var. The reason being is that the video
-+ * mode passed in might not work but slight changes to it might make it
-+ * work. This way we let the user know what is acceptable.
-+ */
-+ switch (var->bits_per_pixel) {
-+ case 1:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ var->xoffset = var->yoffset = 0;
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int s1d15605_set_par(struct fb_info *info)
-+{
-+ int ret;
-+
-+ MSG("%s:\n", __func__);
-+ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ ret = s1d15605fb_resize_framebuffer(info->par);
-+
-+ info->fix.visual = FB_VISUAL_MONO10;
-+ return ret;
-+}
-+
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+ u_int transp, struct fb_info *info)
-+{
-+ if (regno > 1) /* no. of hw registers - we only do mono now */
-+ return 1;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Currently, the routine will simply shut-off the backlight and prevent
-+ * updates/refreshes. Modify according to application.
-+ *
-+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
-+ */
-+static int s1d15605_blank(int blank, struct fb_info *info)
-+{
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+ if (blank)
-+ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
-+ else
-+ pmac_backlight->props.power = FB_BLANK_UNBLANK;
-+ backlight_update_status(pmac_backlight);
-+#endif
-+ return 1;
-+}
-+
-+
-+/*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+/*
-+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ if (var->vmode & FB_VMODE_YWRAP) {
-+ if (var->yoffset < 0
-+ || var->yoffset >= info->var.yres_virtual
-+ || var->xoffset)
-+ return -EINVAL;
-+ } else {
-+ if (var->xoffset + var->xres > info->var.xres_virtual ||
-+ var->yoffset + var->yres > info->var.yres_virtual)
-+ return -EINVAL;
-+ }
-+ info->var.xoffset = var->xoffset;
-+ info->var.yoffset = var->yoffset;
-+ if (var->vmode & FB_VMODE_YWRAP)
-+ info->var.vmode |= FB_VMODE_YWRAP;
-+ else
-+ info->var.vmode &= ~FB_VMODE_YWRAP;
-+ return 0;
-+}
-+*/
-+
-+
-+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
-+{
-+ cfb_copyarea(info, region);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
-+{
-+ cfb_fillrect(info, rect);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
-+{
-+ cfb_imageblit(p, image);
-+ s1d15605_update(p);
-+}
-+
-+
-+/*
-+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
-+ */
-+static ssize_t s1d15605_write(struct file *file, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ unsigned long p = *ppos;
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int fbidx = iminor(inode);
-+ struct fb_info *info = registered_fb[fbidx];
-+ int err;
-+
-+ if (p > info->fix.smem_len)
-+ return -ENOSPC;
-+ if (count >= info->fix.smem_len)
-+ count = info->fix.smem_len;
-+ err = 0;
-+ if (count + p > info->fix.smem_len) {
-+ count = info->fix.smem_len - p;
-+ err = -ENOSPC;
-+ }
-+ if (count) {
-+ char *base_addr;
-+
-+ base_addr = info->screen_base;
-+ count -= copy_from_user(base_addr+p, buf, count);
-+ *ppos += count;
-+ err = -EFAULT;
-+ }
-+
-+ s1d15605_update(info);
-+
-+ if (count)
-+ return count;
-+
-+ return err;
-+}
-+
-+#ifdef USE_PRIVATE_VMA_FXS
-+static void s1d15605_vma_open(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static void s1d15605_vma_close(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
-+ unsigned long address, int *type)
-+{
-+ struct page *page;
-+ struct fb_info *info = vma->vm_private_data;
-+
-+ page = virt_to_page(info->screen_base);
-+ get_page(page);
-+
-+ // FIXME - now someone has a link to our page, start periodically blitting
-+ // latest updates to the actual device.
-+
-+ return page;
-+}
-+
-+
-+static struct vm_operations_struct s1d15605_vm_ops = {
-+ .open = s1d15605_vma_open,
-+ .close = s1d15605_vma_close,
-+ .nopage = s1d15605_vma_nopage
-+};
-+
-+
-+/* We don't do much here - because we have special vm_ops */
-+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ vma->vm_ops = &s1d15605_vm_ops;
-+ vma->vm_flags |= VM_RESERVED;
-+ vma->vm_private_data = info;
-+ s1d15605_vma_open(vma);
-+
-+ return 0;
-+}
-+#endif /* USE_PRIVATE_VMA_FXS */
-+
-+
-+static struct fb_ops s1d15605fb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = s1d15605_check_var,
-+ .fb_set_par = s1d15605_set_par,
-+ .fb_setcolreg = s1d15605_setcolreg,
-+ .fb_blank = s1d15605_blank,
-+// .fb_pan_display = s1d15605_pan_display,
-+ .fb_fillrect = s1d15605_fillrect,
-+ .fb_copyarea = s1d15605_copyarea,
-+ .fb_imageblit = s1d15605_imageblit,
-+ .fb_write = s1d15605_write,
-+#ifdef USE_PRIVATE_VMA_FXS
-+ .fb_mmap = s1d15605_mmap,
-+#endif
-+};
-+
-+
-+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
-+
-+ char value;
-+
-+ /* release the reset line by reading the device - proto hardware */
-+ value = READ_COMMAND;
-+ value = READ_COMMAND;
-+
-+#ifdef CONFIG_MACH_KB9200
-+ /* new boards have dedicated reset line */
-+ gpio_set_value(sinfo->reset_pin, 1);
-+#endif
-+
-+ /* initialize the device within 5ms */
-+ WRITE_COMMAND(RESET_DISPLAY);
-+ WRITE_COMMAND(LCD_BIAS_1_9);
-+ WRITE_COMMAND(ADC_SELECT_REVERSE);
-+ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
-+ WRITE_COMMAND(V5_RESISTOR_RATIO);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
-+ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
-+ WRITE_COMMAND(DISPLAY_ON);
-+
-+ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(0x33);
-+}
-+
-+
-+static int s1d15605fb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct s1d15605fb_info *sinfo;
-+ int ret;
-+
-+ MSG("%s\n", __func__);
-+
-+ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
-+ dev_err(dev, "Cannot allocate framebuffer struct\n");
-+ return -ENOMEM;
-+ }
-+
-+ sinfo = info->par;
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ if (pdev->num_resources < 2) {
-+ dev_err(dev, "Resources unusable\n");
-+ ret = -ENODEV;
-+ goto free_info;
-+ }
-+
-+ info->fbops = &s1d15605fb_ops;
-+ strcpy(info->fix.id, pdev->name);
-+
-+ info->fix.mmio_start = pdev->resource[0].start;
-+ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+ sinfo->reset_pin = pdev->resource[1].start;
-+
-+ ret = s1d15605fb_resize_framebuffer(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
-+ goto free_fb;
-+ }
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "Cannot map LCD memory region\n");
-+ goto release_mem;
-+ }
-+
-+ s1d15605_device_init(sinfo);
-+
-+ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
-+
-+ if (!ret || (ret == 4))
-+ info->var = s1d15605_default;
-+
-+ info->fix = s1d15605_fix;
-+ info->flags = FBINFO_FLAG_DEFAULT |
-+/* FBINFO_HWACCEL_YPAN | */
-+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
-+
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_NOW;
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "Unable to set display parameters\n");
-+ }
-+
-+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+ dev_dbg(dev, "%s SUCCESS\n", __func__);
-+
-+ dev_info(dev, "Driver $Revision: 1.1 $\n");
-+
-+ return 0;
-+
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ kfree(info->screen_base);
-+
-+free_info:
-+ framebuffer_release(info);
-+
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+
-+static int s1d15605fb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct s1d15605fb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ unregister_framebuffer(info);
-+
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+
-+ kfree(info->screen_base);
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+ return 0;
-+}
-+
-+
-+static struct platform_driver s1d15605fb_driver = {
-+ .probe = s1d15605fb_probe,
-+ .remove = s1d15605fb_remove,
-+ .driver = {
-+ .name = "s1d15605fb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+static int __init s1d15605fb_init(void)
-+{
-+ return platform_driver_register(&s1d15605fb_driver);
-+}
-+
-+
-+static void __exit s1d15605fb_exit(void)
-+{
-+ platform_driver_unregister(&s1d15605fb_driver);
-+}
-+
-+
-+module_init(s1d15605fb_init);
-+module_exit(s1d15605fb_exit);
-+
-+
-+MODULE_AUTHOR("KwikByte");
-+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h Tue May 8 12:13:31 2007
-@@ -0,0 +1,61 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_adc.h
-+ *
-+ * Copyright (C) SAN People
-+ *
-+ * Analog-to-Digital Converter (ADC) registers.
-+ * Based on AT91SAM9260 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_ADC_H
-+#define AT91_ADC_H
-+
-+#define AT91_ADC_CR 0x00 /* Control Register */
-+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
-+#define AT91_ADC_START (1 << 1) /* Start Conversion */
-+
-+#define AT91_ADC_MR 0x04 /* Mode Register */
-+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
-+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
-+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
-+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
-+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
-+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
-+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
-+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
-+#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
-+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
-+#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */
-+#define AT91_ADC_STARTUP_(x) ((x) << 16)
-+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
-+#define AT91_ADC_SHTIM_(x) ((x) << 24)
-+
-+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
-+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
-+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
-+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
-+
-+#define AT91_ADC_SR 0x1C /* Status Register */
-+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
-+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
-+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
-+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
-+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
-+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
-+
-+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
-+#define AT91_ADC_LDATA (0x3ff)
-+
-+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
-+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
-+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
-+
-+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4) /* Channel Data Register N */
-+#define AT91_ADC_DATA (0x3ff)
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h Tue May 8 12:13:31 2007
-@@ -26,6 +26,9 @@
- #define AT91_MCI_MR 0x04 /* Mode Register */
- #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
- #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
-+#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
-+#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
-+#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
- #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
- #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
- #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h Fri May 11 16:45:00 2007
-@@ -37,7 +37,9 @@
- #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
- #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
--#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
-+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */
-+
-+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
- #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
- #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
- #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h Tue May 8 12:56:33 2007
-@@ -107,185 +107,4 @@
- #define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
-
-
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */
--#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */
--#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */
--#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */
--#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */
--#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */
--#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */
--#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */
--#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */
--#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */
--#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */
--#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */
--#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */
--#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */
--#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */
--#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */
--#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */
--#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */
--#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */
--#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */
--#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */
--#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */
--#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */
--#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */
--#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */
--#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */
--#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */
--#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */
--#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */
--#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */
--#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */
--#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */
--#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */
--#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */
--#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */
--#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */
--#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */
--#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */
--#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */
--#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */
--#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */
--#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */
--#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
--#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */
--#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */
--#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */
--#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */
--#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */
--#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */
--#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */
--#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */
--#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */
--#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */
--#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */
--#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */
--#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */
--#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */
--#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */
--#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */
--#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */
--#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */
--#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */
--#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */
--#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */
--
--#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */
--#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */
--#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */
--#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */
--#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */
--#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */
--#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */
--#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */
--#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */
--#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */
--#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */
--#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */
--#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */
--#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */
--#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */
--#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */
--#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */
--#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */
--#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */
--#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */
--#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */
--#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */
--#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */
--#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */
--#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */
--#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */
--#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */
--#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */
--#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */
--#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */
--#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */
--#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */
--#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */
--#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */
--#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */
--#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */
--#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */
--#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */
--#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */
--#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */
--#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */
--#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */
--#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */
--#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */
--#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */
--#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */
--#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */
--#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */
--#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */
--#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */
--#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */
--
--#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */
--#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */
--#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */
--#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */
--#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */
--#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */
--#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */
--#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */
--#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */
--#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */
--#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */
--#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
--#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
--#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */
--
--#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */
--#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */
--#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */
--#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */
--#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */
--#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */
--#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */
--#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */
--#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */
--#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */
--#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */
--#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */
--#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */
--#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */
--#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */
--#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */
--#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */
--#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */
--#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */
--#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */
--#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */
--#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */
--#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */
--#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */
--#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */
--#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */
--#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */
--#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */
--#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
--#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
--#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
--#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
--#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
--#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
--#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
--#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */
--#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */
--#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */
--#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */
--#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */
--#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */
--#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */
--#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */
--#endif
--
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h Tue May 8 12:56:33 2007
-@@ -117,13 +117,4 @@
- #define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-
-
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--
--// TODO: Add
--
--#endif
--
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h Fri May 11 16:20:33 2007
-@@ -67,7 +67,7 @@
- #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
- #define AT91_MATRIX_CS4A_SMC (0 << 4)
- #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
--#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
- #define AT91_MATRIX_CS5A_SMC (0 << 5)
- #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
- #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h Tue May 8 12:56:33 2007
-@@ -98,195 +98,4 @@
- #define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
-
-
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */
--#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */
--#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */
--#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */
--#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */
--#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */
--#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */
--#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */
--#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */
--#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */
--#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */
--#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */
--#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */
--#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */
--#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */
--#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */
--#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */
--#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */
--#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */
--#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */
--#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */
--#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */
--#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */
--#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */
--#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */
--#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */
--#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */
--#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */
--#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */
--#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */
--#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */
--#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */
--#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */
--#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */
--#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */
--#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */
--#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */
--#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */
--#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */
--#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */
--#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */
--#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */
--#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */
--#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */
--#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */
--#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */
--#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */
--#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */
--#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */
--#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */
--#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */
--#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */
--#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */
--#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */
--#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */
--#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */
--#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */
--#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */
--#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */
--#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */
--#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */
--#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */
--#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */
--
--#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */
--#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */
--#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */
--#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */
--#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */
--#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */
--#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */
--#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */
--#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */
--#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */
--#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */
--#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */
--#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */
--#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */
--#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */
--#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */
--#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */
--#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */
--#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */
--#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */
--#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */
--#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */
--#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */
--#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */
--#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */
--#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */
--#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */
--#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */
--#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */
--#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */
--#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */
--#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */
--#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */
--#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */
--#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */
--#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */
--#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */
--#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */
--#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */
--#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */
--#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */
--#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */
--#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */
--#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */
--#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */
--#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */
--#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */
--#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */
--#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */
--#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */
--#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */
--#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */
--#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */
--#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */
--#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */
--#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */
--#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */
--#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */
--#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */
--#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */
--#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */
--
--#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */
--#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */
--#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */
--#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */
--#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */
--#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */
--#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */
--#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */
--#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */
--#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */
--#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */
--#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */
--#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */
--#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */
--#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */
--#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */
--#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */
--#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */
--#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */
--#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */
--#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */
--#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */
--#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */
--#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */
--#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */
--#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */
--#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */
--#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */
--#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */
--#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */
--#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */
--#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */
--#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */
--#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */
--#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
--#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */
--#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
--#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */
--#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
--#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */
--#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
--#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */
--#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
--#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */
--#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
--#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */
--#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */
--#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */
--#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */
--#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */
--#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */
--#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */
--#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */
--#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */
--#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */
--#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */
--#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */
--#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */
--#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */
--#endif
--
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h Tue May 8 12:56:33 2007
-@@ -119,13 +119,5 @@
- #define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
- #define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
-
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--
--// TODO: Add
--
--#endif
-
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h Fri May 11 14:53:48 2007
-@@ -0,0 +1,110 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9260.h
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Common definitions.
-+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#ifndef AT91SAM9RL_H
-+#define AT91SAM9RL_H
-+
-+/*
-+ * Peripheral identifiers/interrupts.
-+ */
-+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-+#define AT91_ID_SYS 1 /* System Controller */
-+#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-+#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-+#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-+#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-+#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-+#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-+#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-+#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-+#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-+#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-+#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-+#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-+#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-+#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-+#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-+#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-+#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-+#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-+#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-+#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-+#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-+#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-+#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-+#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-+
-+
-+/*
-+ * User Peripheral physical base addresses.
-+ */
-+#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-+#define AT91SAM9RL_BASE_TC0 0xfffa0000
-+#define AT91SAM9RL_BASE_TC1 0xfffa0040
-+#define AT91SAM9RL_BASE_TC2 0xfffa0080
-+#define AT91SAM9RL_BASE_MCI 0xfffa4000
-+#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-+#define AT91SAM9RL_BASE_TWI1 0xfffac000
-+#define AT91SAM9RL_BASE_US0 0xfffb0000
-+#define AT91SAM9RL_BASE_US1 0xfffb4000
-+#define AT91SAM9RL_BASE_US2 0xfffb8000
-+#define AT91SAM9RL_BASE_US3 0xfffbc000
-+#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-+#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-+#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-+#define AT91SAM9RL_BASE_SPI 0xfffcc000
-+#define AT91SAM9RL_BASE_TSC 0xfffd0000
-+#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-+#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-+#define AT91_BASE_SYS 0xffffc000
-+
-+
-+/*
-+ * System Peripherals (offset from AT91_BASE_SYS)
-+ */
-+#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
-+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
-+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-+#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
-+
-+
-+/*
-+ * Internal Memory.
-+ */
-+#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-+#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-+
-+#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-+#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
-+
-+#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-+#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h Fri May 11 16:18:45 2007
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9rl_matrix.h
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#ifndef AT91SAM9RL_MATRIX_H
-+#define AT91SAM9RL_MATRIX_H
-+
-+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-+
-+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-+
-+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-+
-+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-+#define AT91_MATRIX_RCB2 (1 << 2)
-+#define AT91_MATRIX_RCB3 (1 << 3)
-+#define AT91_MATRIX_RCB4 (1 << 4)
-+#define AT91_MATRIX_RCB5 (1 << 5)
-+
-+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-+#define AT91_MATRIX_ITCM_0 (0 << 0)
-+#define AT91_MATRIX_ITCM_16 (5 << 0)
-+#define AT91_MATRIX_ITCM_32 (6 << 0)
-+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-+#define AT91_MATRIX_DTCM_0 (0 << 4)
-+#define AT91_MATRIX_DTCM_16 (5 << 4)
-+#define AT91_MATRIX_DTCM_32 (6 << 4)
-+
-+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-+#define AT91_MATRIX_CS1A_SMC (0 << 1)
-+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-+#define AT91_MATRIX_CS3A_SMC (0 << 3)
-+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-+#define AT91_MATRIX_CS4A_SMC (0 << 4)
-+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_CS5A_SMC (0 << 5)
-+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-+
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h
---- linux-2.6.21/include/asm-arm/arch-at91/board.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/board.h Thu May 10 12:21:10 2007
-@@ -62,7 +62,7 @@
- };
- extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
-- /* Ethernet */
-+ /* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
-@@ -114,9 +114,31 @@
- };
- extern void __init at91_add_device_serial(void);
-
-+ /* LCD Controller */
-+struct atmel_lcdfb_info;
-+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-+
-+ /* AC97 */
-+struct atmel_ac97_data {
-+ u8 reset_pin; /* reset */
-+};
-+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-+
-+ /* ISI */
-+extern void __init at91_add_device_isi(void);
-+
- /* LEDs */
- extern u8 at91_leds_cpu;
- extern u8 at91_leds_timer;
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-
-+struct at91_gpio_led {
-+ u8 index; /* index of LED */
-+ char* name; /* name of LED */
-+ u8 gpio; /* AT91_PIN_xx */
-+ u8 flags; /* 1=active-high */
-+ char* trigger; /* default trigger */
-+};
-+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/cpu.h linux-2.6-stable/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.21/include/asm-arm/arch-at91/cpu.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/cpu.h Wed May 9 10:20:54 2007
-@@ -26,6 +26,8 @@
- #define ARCH_ID_AT91SAM9XE256 0x329a93a0
- #define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-
-+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-+
- static inline unsigned long at91_cpu_identify(void)
- {
- return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-@@ -68,4 +70,10 @@
- #define cpu_is_at91sam9263() (0)
- #endif
-
-+#ifdef CONFIG_ARCH_AT91SAM9RL
-+#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
-+#else
-+#define cpu_is_at91sam9rl() (0)
-+#endif
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/hardware.h linux-2.6-stable/include/asm-arm/arch-at91/hardware.h
---- linux-2.6.21/include/asm-arm/arch-at91/hardware.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/hardware.h Fri May 11 14:45:12 2007
-@@ -24,6 +24,8 @@
- #include <asm/arch/at91sam9261.h>
- #elif defined(CONFIG_ARCH_AT91SAM9263)
- #include <asm/arch/at91sam9263.h>
-+#elif defined(CONFIG_ARCH_AT91SAM9RL)
-+#include <asm/arch/at91sam9rl.h>
- #else
- #error "Unsupported AT91 processor"
- #endif
-@@ -69,22 +71,5 @@
- /* Clocks */
- #define AT91_SLOW_CLOCK 32768 /* slow clock */
-
--#ifndef __ASSEMBLY__
--#include <asm/io.h>
--
--static inline unsigned int at91_sys_read(unsigned int reg_offset)
--{
-- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
--
-- return __raw_readl(addr + reg_offset);
--}
--
--static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
--{
-- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
--
-- __raw_writel(value, addr + reg_offset);
--}
--#endif
-
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.21/include/asm-arm/arch-at91/ics1523.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h Tue May 8 12:13:31 2007
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//* ATMEL Microcontroller Software Support - ROUSSET -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name : ics1523.h
-+//* Object : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED : Creation
-+//* 1.2 13/01/03 FB : Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
-+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
-+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
-+
-+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
-+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS1523_ACCESS_OK 0 /* OK */
-+#define ICS1523_ACCESS_ERROR -1 /* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_ADDR 0x26 /* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition */
-+/*--------------------------------------------------*/
-+
-+#define ICS_ICR 0x0 /* Input Control Register */
-+#define ICS_LCR 0x1 /* Loop Control Register */
-+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
-+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
-+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
-+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
-+#define ICS_OE 0x6 /* Output Enables Register */
-+#define ICS_OD 0x7 /* Osc Divider Register */
-+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
-+#define ICS_VID 0x10 /* Chip Version Register */
-+#define ICS_RID 0x11 /* Chip Revision Register */
-+#define ICS_SR 0x12 /* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition */
-+/*------------------------------------------------------*/
-+
-+#define ICS_PDEN 0x1 /* Phase Detector Enable */
-+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
-+#define ICS_REFPOL 0x4 /* External Reference Polarity */
-+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
-+#define ICS_FBKSEL 0x10 /* External Feedback Select */
-+#define ICS_FUNCSEL 0x20 /* Function Out Select */
-+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
-+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition */
-+/*-----------------------------------------------------*/
-+
-+#define ICS_PFD 0x7 /* Phase Detector Gain */
-+#define ICS_PSD 0x30 /* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
-+/*------------------------------------------------------------*/
-+
-+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
-+#define ICS_FILSEL 0x80 /* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
-+/*----------------------------------------------------------------*/
-+
-+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
-+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition */
-+/*-------------------------------------------------------*/
-+
-+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
-+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
-+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
-+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
-+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
-+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
-+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
-+#define ICS_INSEL 0x80 /* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition */
-+/*---------------------------------------------------*/
-+
-+#define ICS_DPAR 0x0A /* DPA Reset Command */
-+#define ICS_PLLR 0x50 /* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition */
-+/*------------------------------------------------*/
-+
-+#define ICS_CHIPV 0xFF /* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition */
-+/*-------------------------------------------------*/
-+
-+#define ICS_CHIPR 0xFF /* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition */
-+/*------------------------------------------*/
-+
-+#define ICS_DPALOCK 0x1 /* DPA Lock Status */
-+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/io.h linux-2.6-stable/include/asm-arm/arch-at91/io.h
---- linux-2.6.21/include/asm-arm/arch-at91/io.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/io.h Fri May 11 14:45:12 2007
-@@ -29,4 +29,22 @@
- #define __mem_pci(a) (a)
-
-
-+#ifndef __ASSEMBLY__
-+
-+static inline unsigned int at91_sys_read(unsigned int reg_offset)
-+{
-+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-+
-+ return __raw_readl(addr + reg_offset);
-+}
-+
-+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-+{
-+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-+
-+ __raw_writel(value, addr + reg_offset);
-+}
-+
-+#endif
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/irqs.h linux-2.6-stable/include/asm-arm/arch-at91/irqs.h
---- linux-2.6.21/include/asm-arm/arch-at91/irqs.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/irqs.h Fri May 11 14:45:12 2007
-@@ -21,6 +21,7 @@
- #ifndef __ASM_ARCH_IRQS_H
- #define __ASM_ARCH_IRQS_H
-
-+#include <asm/io.h>
- #include <asm/arch/at91_aic.h>
-
- #define NR_AIC_IRQS 32
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h
---- linux-2.6.21/include/asm-arm/arch-at91/spi.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h Tue May 8 14:31:24 2007
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR 153 /* registered device number */
-+
-+#define DEFAULT_SPI_CLK 6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ * DataFlash uses maximum of 2
-+ * spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS 8
-+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
-+ int txlen[MAX_SPI_TRANSFERS];
-+ void* rx[MAX_SPI_TRANSFERS]; /* receive */
-+ int rxlen[MAX_SPI_TRANSFERS];
-+ int nr_transfers; /* number of transfers */
-+ int curr; /* current transfer */
-+};
-+
-+struct spi_local {
-+ unsigned int pcs; /* Peripheral Chip Select value */
-+
-+ struct spi_transfer_list *xfers; /* current transfer list */
-+ dma_addr_t tx, rx; /* DMA address for current transfer */
-+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/timex.h linux-2.6-stable/include/asm-arm/arch-at91/timex.h
---- linux-2.6.21/include/asm-arm/arch-at91/timex.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/timex.h Wed May 9 10:20:53 2007
-@@ -37,6 +37,11 @@
- #define AT91SAM9_MASTER_CLOCK 99959500
- #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-+#elif defined(CONFIG_ARCH_AT91SAM9RL)
-+
-+#define AT91SAM9_MASTER_CLOCK 100000000
-+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-+
- #endif
-
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/uncompress.h linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h
---- linux-2.6.21/include/asm-arm/arch-at91/uncompress.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h Fri May 11 14:45:12 2007
-@@ -21,7 +21,7 @@
- #ifndef __ASM_ARCH_UNCOMPRESS_H
- #define __ASM_ARCH_UNCOMPRESS_H
-
--#include <asm/hardware.h>
-+#include <asm/io.h>
- #include <asm/arch/at91_dbgu.h>
-
- /*
-diff -urN -x CVS linux-2.6.21/include/linux/clk.h linux-2.6-stable/include/linux/clk.h
---- linux-2.6.21/include/linux/clk.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/clk.h Tue May 8 12:13:31 2007
-@@ -121,4 +121,24 @@
- */
- struct clk *clk_get_parent(struct clk *clk);
-
-+/**
-+ * clk_must_disable - report whether a clock's users must disable it
-+ * @clk: one node in the clock tree
-+ *
-+ * This routine returns true only if the upcoming system state requires
-+ * disabling the specified clock.
-+ *
-+ * It's common for platform power states to constrain certain clocks (and
-+ * their descendants) to be unavailable, while other states allow that
-+ * clock to be active. A platform's power states often include an "all on"
-+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
-+ * operating states which sacrifice functionality for lower power usage.
-+ *
-+ * The constraint value is commonly tested in device driver suspend(), to
-+ * leave clocks active if they are needed for features like wakeup events.
-+ * On platforms that support reduced functionality operating states, the
-+ * constraint may also need to be tested during resume() and probe() calls.
-+ */
-+int clk_must_disable(struct clk *clk);
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h
---- linux-2.6.21/include/linux/i2c-id.h Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/i2c-id.h Tue May 8 12:13:31 2007
-@@ -202,6 +202,7 @@
-
- /* --- PCA 9564 based algorithms */
- #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
-+#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
-
- /* --- ACPI Embedded controller algorithms */
- #define I2C_HW_ACPI_EC 0x1f0000
-diff -urN -x CVS linux-2.6.21/include/video/atmel_lcdc.h linux-2.6-stable/include/video/atmel_lcdc.h
---- linux-2.6.21/include/video/atmel_lcdc.h Thu Jan 1 02:00:00 1970
-+++ linux-2.6-stable/include/video/atmel_lcdc.h Thu May 10 12:34:01 2007
-@@ -0,0 +1,196 @@
-+/*
-+ * Header file for AT91/AT32 LCD Controller
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_LCDC_H__
-+#define __ATMEL_LCDC_H__
-+
-+ /* LCD Controller info data structure */
-+struct atmel_lcdfb_info {
-+ spinlock_t lock;
-+ struct fb_info *info;
-+ void __iomem *mmio;
-+ unsigned long irq_base;
-+
-+ unsigned int guard_time;
-+ struct platform_device *pdev;
-+ struct clk *bus_clk;
-+ struct clk *lcdc_clk;
-+ unsigned int default_bpp;
-+ unsigned int default_lcdcon2;
-+ unsigned int default_dmacon;
-+ void (*atmel_lcdfb_power_control)(int on);
-+ struct fb_monspecs *default_monspecs;
-+ u32 pseudo_palette[16];
-+};
-+
-+#define ATMEL_LCDC_DMABADDR1 0x00
-+#define ATMEL_LCDC_DMABADDR2 0x04
-+#define ATMEL_LCDC_DMAFRMPT1 0x08
-+#define ATMEL_LCDC_DMAFRMPT2 0x0c
-+#define ATMEL_LCDC_DMAFRMADD1 0x10
-+#define ATMEL_LCDC_DMAFRMADD2 0x14
-+
-+#define ATMEL_LCDC_DMAFRMCFG 0x18
-+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
-+#define ATMEL_LCDC_BLENGTH_OFFSET 24
-+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
-+
-+#define ATMEL_LCDC_DMACON 0x1c
-+#define ATMEL_LCDC_DMAEN (0x1 << 0)
-+#define ATMEL_LCDC_DMARST (0x1 << 1)
-+#define ATMEL_LCDC_DMABUSY (0x1 << 2)
-+#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
-+#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
-+
-+#define ATMEL_LCDC_DMA2DCFG 0x20
-+#define ATMEL_LCDC_ADDRINC_OFFSET 0
-+#define ATMEL_LCDC_ADDRINC (0xffff)
-+#define ATMEL_LCDC_PIXELOFF_OFFSET 24
-+#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
-+
-+#define ATMEL_LCDC_LCDCON1 0x0800
-+#define ATMEL_LCDC_BYPASS (1 << 0)
-+#define ATMEL_LCDC_CLKVAL_OFFSET 12
-+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
-+#define ATMEL_LCDC_LINCNT (0x7ff << 21)
-+
-+#define ATMEL_LCDC_LCDCON2 0x0804
-+#define ATMEL_LCDC_DISTYPE (3 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
-+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
-+#define ATMEL_LCDC_SCANMOD (1 << 2)
-+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
-+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
-+#define ATMEL_LCDC_IFWIDTH (3 << 3)
-+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
-+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
-+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
-+#define ATMEL_LCDC_PIXELSIZE (7 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
-+#define ATMEL_LCDC_INVVD (1 << 8)
-+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
-+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
-+#define ATMEL_LCDC_INVFRAME (1 << 9 )
-+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
-+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
-+#define ATMEL_LCDC_INVLINE (1 << 10)
-+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
-+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
-+#define ATMEL_LCDC_INVCLK (1 << 11)
-+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
-+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
-+#define ATMEL_LCDC_INVDVAL (1 << 12)
-+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
-+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
-+#define ATMEL_LCDC_CLKMOD (1 << 15)
-+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-+#define ATMEL_LCDC_MEMOR (1 << 31)
-+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
-+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
-+
-+#define ATMEL_LCDC_TIM1 0x0808
-+#define ATMEL_LCDC_VFP (0xff << 0)
-+#define ATMEL_LCDC_VBP_OFFSET 8
-+#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
-+#define ATMEL_LCDC_VPW_OFFSET 16
-+#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define ATMEL_LCDC_VHDLY_OFFSET 24
-+#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
-+
-+#define ATMEL_LCDC_TIM2 0x080c
-+#define ATMEL_LCDC_HBP (0xff << 0)
-+#define ATMEL_LCDC_HPW_OFFSET 8
-+#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
-+#define ATMEL_LCDC_HFP_OFFSET 21
-+#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+
-+#define ATMEL_LCDC_LCDFRMCFG 0x0810
-+#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
-+#define ATMEL_LCDC_HOZVAL_OFFSET 21
-+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
-+
-+#define ATMEL_LCDC_FIFO 0x0814
-+#define ATMEL_LCDC_FIFOTH (0xffff)
-+
-+#define ATMEL_LCDC_MVAL 0x0818
-+
-+#define ATMEL_LCDC_DP1_2 0x081c
-+#define ATMEL_LCDC_DP4_7 0x0820
-+#define ATMEL_LCDC_DP3_5 0x0824
-+#define ATMEL_LCDC_DP2_3 0x0828
-+#define ATMEL_LCDC_DP5_7 0x082c
-+#define ATMEL_LCDC_DP3_4 0x0830
-+#define ATMEL_LCDC_DP4_5 0x0834
-+#define ATMEL_LCDC_DP6_7 0x0838
-+#define ATMEL_LCDC_DP1_2_VAL (0xff)
-+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
-+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
-+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
-+
-+#define ATMEL_LCDC_PWRCON 0x083c
-+#define ATMEL_LCDC_PWR (1 << 0)
-+#define ATMEL_LCDC_GUARDT_OFFSET 1
-+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
-+#define ATMEL_LCDC_BUSY (1 << 31)
-+
-+#define ATMEL_LCDC_CONTRAST_CTR 0x0840
-+#define ATMEL_LCDC_PS (3 << 0)
-+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
-+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
-+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
-+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
-+#define ATMEL_LCDC_POL (1 << 2)
-+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
-+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
-+#define ATMEL_LCDC_ENA (1 << 3)
-+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
-+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
-+
-+#define ATMEL_LCDC_CONTRAST_VAL 0x0844
-+#define ATMEL_LCDC_CVAL (0xff)
-+
-+#define ATMEL_LCDC_IER 0x0848
-+#define ATMEL_LCDC_IDR 0x084c
-+#define ATMEL_LCDC_IMR 0x0850
-+#define ATMEL_LCDC_ISR 0x0854
-+#define ATMEL_LCDC_ICR 0x0858
-+#define ATMEL_LCDC_LNI (1 << 0)
-+#define ATMEL_LCDC_LSTLNI (1 << 1)
-+#define ATMEL_LCDC_EOFI (1 << 2)
-+#define ATMEL_LCDC_UFLWI (1 << 4)
-+#define ATMEL_LCDC_OWRI (1 << 5)
-+#define ATMEL_LCDC_MERI (1 << 6)
-+
-+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
-+
-+#endif /* __ATMEL_LCDC_H__ */
-diff -urN -x CVS linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c Tue May 8 12:13:58 2007
-@@ -34,8 +34,7 @@
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
-
--#include <asm/arch/hardware.h>
--#include <asm/arch/at91_pio.h>
-+#include <asm/hardware.h>
- #include <asm/arch/gpio.h>
-
- #include "../codecs/wm8731.h"
-@@ -48,13 +47,6 @@
- #define DBG(x...)
- #endif
-
--#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
--#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
--#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
--#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
--#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
--#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
--
- static struct clk *pck1_clk;
- static struct clk *pllb_clk;
-
-@@ -277,7 +269,6 @@
- static int __init eti_b1_init(void)
- {
- int ret;
-- u32 ssc_pio_lines;
- struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
-
- if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -311,19 +302,12 @@
- goto fail_io_unmap;
- }
-
-- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
-- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
--
-- /* Reset all PIO registers and assign lines to peripheral A */
-- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
-+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
-+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
-+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
-+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
-+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
-+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
-
- /*
- * Set PCK1 parent to PLLB and its rate to 12 Mhz.
+++ /dev/null
-diff -urN linux-2.6.22.1-0rig/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.22.1-0rig/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/boot/compressed/head-at91rm9200.S 2007-07-17 23:35:19.000000000 +0200
-@@ -73,6 +73,12 @@
- cmp r7, r3
- beq 99f
-
-+ @ Promwad Chub : 1181
-+ mov r3, #(MACH_TYPE_CHUB & 0xff)
-+ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00)
-+ cmp r7, r3
-+ beq 99f
-+
- @ Unknown board, use the AT91RM9200DK board
- @ mov r7, #MACH_TYPE_AT91RM9200
- mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
-diff -urN linux-2.6.22.1-0rig/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig
---- linux-2.6.22.1-0rig/arch/arm/configs/at91sam9260ek_defconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/configs/at91sam9260ek_defconfig 2007-07-17 23:35:19.000000000 +0200
-@@ -1,18 +1,24 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.19-rc6
--# Fri Nov 17 18:42:21 2006
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:42:02 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-@@ -31,13 +37,16 @@
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
- # CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_UTS_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -76,7 +85,9 @@
- # Block layer
- #
- CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-
- #
- # IO Schedulers
-@@ -110,10 +121,12 @@
- # CONFIG_ARCH_IMX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -129,21 +142,29 @@
- # CONFIG_ARCH_AT91RM9200 is not set
- CONFIG_ARCH_AT91SAM9260=y
- # CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+
-+#
-+# AT91SAM9260 Variants
-+#
-+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
- #
--# AT91SAM9260 Board Type
-+# AT91SAM9260 / AT91SAM9XE Board Type
- #
- CONFIG_MACH_AT91SAM9260EK=y
-
- #
- # AT91 Board Options
- #
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
- # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-
- #
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
-@@ -166,6 +187,7 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
-@@ -193,6 +215,7 @@
- # CONFIG_SPARSEMEM_STATIC is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -203,6 +226,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -228,7 +252,6 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-
- #
- # Networking
-@@ -242,9 +265,6 @@
- CONFIG_PACKET=y
- # CONFIG_PACKET_MMAP is not set
- CONFIG_UNIX=y
--CONFIG_XFRM=y
--# CONFIG_XFRM_USER is not set
--# CONFIG_XFRM_SUB_POLICY is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -263,14 +283,15 @@
- # CONFIG_INET_IPCOMP is not set
- # CONFIG_INET_XFRM_TUNNEL is not set
- # CONFIG_INET_TUNNEL is not set
--CONFIG_INET_XFRM_MODE_TRANSPORT=y
--CONFIG_INET_XFRM_MODE_TUNNEL=y
--CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
- CONFIG_INET_DIAG=y
- CONFIG_INET_TCP_DIAG=y
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_INET6_XFRM_TUNNEL is not set
- # CONFIG_INET6_TUNNEL is not set
-@@ -328,6 +349,7 @@
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
-
- #
-@@ -348,6 +370,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -360,7 +383,6 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-
-@@ -369,6 +391,7 @@
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
-@@ -388,6 +411,7 @@
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
- # SCSI Transports
-@@ -405,6 +429,11 @@
- # CONFIG_SCSI_DEBUG is not set
-
- #
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
- # Multi-device support (RAID and LVM)
- #
- # CONFIG_MD is not set
-@@ -425,7 +454,51 @@
- #
- # Network device support
- #
--# CONFIG_NETDEVICES is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
- # CONFIG_NETPOLL is not set
- # CONFIG_NET_POLL_CONTROLLER is not set
-
-@@ -517,10 +590,6 @@
- # CONFIG_NVRAM is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
--
--#
--# Ftape, the floppy tape device driver
--#
- # CONFIG_RAW_DRIVER is not set
-
- #
-@@ -553,7 +622,11 @@
- #
- # Misc devices
- #
--# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
- # LED devices
-@@ -582,7 +655,7 @@
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
- # CONFIG_FB is not set
-
- #
-@@ -590,7 +663,6 @@
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
-@@ -598,6 +670,12 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
-@@ -610,7 +688,6 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -619,7 +696,8 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
-@@ -671,6 +749,7 @@
- # CONFIG_USB_ATI_REMOTE2 is not set
- # CONFIG_USB_KEYSPAN_REMOTE is not set
- # CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
-@@ -708,6 +787,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -717,6 +797,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -889,6 +970,11 @@
- # CONFIG_NLS_UTF8 is not set
-
- #
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
- # Profiling support
- #
- # CONFIG_PROFILING is not set
-@@ -900,28 +986,30 @@
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
--# CONFIG_HEADERS_CHECK is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -941,9 +1029,12 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22.1-0rig/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig
---- linux-2.6.22.1-0rig/arch/arm/configs/at91sam9261ek_defconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/configs/at91sam9261ek_defconfig 2007-07-17 23:35:19.000000000 +0200
-@@ -1,18 +1,24 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.19-rc6
--# Fri Nov 17 18:00:38 2006
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:42:30 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
- CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-@@ -31,13 +37,16 @@
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
- # CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
- # CONFIG_UTS_NS is not set
- # CONFIG_AUDIT is not set
- # CONFIG_IKCONFIG is not set
-+CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -76,7 +85,9 @@
- # Block layer
- #
- CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
- # CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-
- #
- # IO Schedulers
-@@ -110,10 +121,12 @@
- # CONFIG_ARCH_IMX is not set
- # CONFIG_ARCH_IOP32X is not set
- # CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -129,6 +142,7 @@
- # CONFIG_ARCH_AT91RM9200 is not set
- # CONFIG_ARCH_AT91SAM9260 is not set
- CONFIG_ARCH_AT91SAM9261=y
-+# CONFIG_ARCH_AT91SAM9263 is not set
-
- #
- # AT91SAM9261 Board Type
-@@ -138,12 +152,14 @@
- #
- # AT91 Board Options
- #
-+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
- # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
-
- #
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
-@@ -166,6 +182,7 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
-@@ -193,6 +210,7 @@
- # CONFIG_SPARSEMEM_STATIC is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -203,6 +221,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -228,7 +247,6 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-
- #
- # Networking
-@@ -245,6 +263,7 @@
- CONFIG_XFRM=y
- # CONFIG_XFRM_USER is not set
- # CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
- # CONFIG_NET_KEY is not set
- CONFIG_INET=y
- # CONFIG_IP_MULTICAST is not set
-@@ -271,6 +290,7 @@
- # CONFIG_TCP_CONG_ADVANCED is not set
- CONFIG_TCP_CONG_CUBIC=y
- CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
- # CONFIG_IPV6 is not set
- # CONFIG_INET6_XFRM_TUNNEL is not set
- # CONFIG_INET6_TUNNEL is not set
-@@ -328,6 +348,7 @@
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
-
- #
-@@ -350,6 +371,7 @@
- # User Modules And Translation Layers
- #
- # CONFIG_MTD_CHAR is not set
-+CONFIG_MTD_BLKDEVS=y
- CONFIG_MTD_BLOCK=y
- # CONFIG_FTL is not set
- # CONFIG_NFTL is not set
-@@ -386,6 +408,8 @@
- #
- # Self-contained MTD device drivers
- #
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -422,6 +446,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -434,7 +459,6 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-
-@@ -443,6 +467,7 @@
- #
- # CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
- # CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
-@@ -462,6 +487,7 @@
- CONFIG_SCSI_MULTI_LUN=y
- # CONFIG_SCSI_CONSTANTS is not set
- # CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
- # SCSI Transports
-@@ -479,6 +505,11 @@
- # CONFIG_SCSI_DEBUG is not set
-
- #
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
- # Multi-device support (RAID and LVM)
- #
- # CONFIG_MD is not set
-@@ -575,7 +606,16 @@
- # CONFIG_INPUT_KEYBOARD is not set
- # CONFIG_INPUT_MOUSE is not set
- # CONFIG_INPUT_JOYSTICK is not set
--# CONFIG_INPUT_TOUCHSCREEN is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_UCB1400 is not set
- # CONFIG_INPUT_MISC is not set
-
- #
-@@ -634,10 +674,6 @@
- # CONFIG_NVRAM is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
--
--#
--# Ftape, the floppy tape device driver
--#
- # CONFIG_RAW_DRIVER is not set
-
- #
-@@ -662,6 +698,7 @@
- # I2C Hardware Bus support
- #
- CONFIG_I2C_AT91=y
-+CONFIG_I2C_AT91_CLOCKRATE=100000
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
-@@ -686,8 +723,20 @@
- #
- # SPI support
- #
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-
- #
- # Dallas's 1-wire bus
-@@ -703,7 +752,11 @@
- #
- # Misc devices
- #
--# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
- # LED devices
-@@ -732,7 +785,7 @@
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
- # CONFIG_FB is not set
-
- #
-@@ -740,7 +793,6 @@
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
-@@ -748,6 +800,12 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
-@@ -760,7 +818,6 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
- # CONFIG_USB_OTG is not set
-
-@@ -769,7 +826,8 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
-@@ -821,6 +879,7 @@
- # CONFIG_USB_ATI_REMOTE2 is not set
- # CONFIG_USB_KEYSPAN_REMOTE is not set
- # CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
-@@ -858,6 +917,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -867,6 +927,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -903,7 +964,6 @@
- # CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
- CONFIG_MMC_AT91=m
--# CONFIG_MMC_TIFM_SD is not set
-
- #
- # Real Time Clock
-@@ -973,7 +1033,6 @@
- # CONFIG_BEFS_FS is not set
- # CONFIG_BFS_FS is not set
- # CONFIG_EFS_FS is not set
--# CONFIG_JFFS_FS is not set
- # CONFIG_JFFS2_FS is not set
- CONFIG_CRAMFS=y
- # CONFIG_VXFS_FS is not set
-@@ -1045,6 +1104,11 @@
- # CONFIG_NLS_UTF8 is not set
-
- #
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
- # Profiling support
- #
- # CONFIG_PROFILING is not set
-@@ -1056,28 +1120,30 @@
- CONFIG_ENABLE_MUST_CHECK=y
- # CONFIG_MAGIC_SYSRQ is not set
- # CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
- # CONFIG_DEBUG_VM is not set
- # CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
--# CONFIG_HEADERS_CHECK is not set
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1097,9 +1163,12 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
- # CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
- CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22.1-0rig/arch/arm/configs/at91sam9263ek_defconfig linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig
---- linux-2.6.22.1-0rig/arch/arm/configs/at91sam9263ek_defconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/configs/at91sam9263ek_defconfig 2007-07-17 23:35:19.000000000 +0200
-@@ -1,11 +1,14 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.20-rc1
--# Mon Jan 8 16:06:54 2007
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:42:49 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
- # CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
- CONFIG_GENERIC_HARDIRQS=y
- CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_HARDIRQS_SW_RESEND=y
-@@ -15,6 +18,7 @@
- # CONFIG_ARCH_HAS_ILOG2_U64 is not set
- CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
- CONFIG_VECTORS_BASE=0xffff0000
- CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-@@ -33,6 +37,7 @@
- # CONFIG_SWAP is not set
- CONFIG_SYSVIPC=y
- # CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
- # CONFIG_POSIX_MQUEUE is not set
- # CONFIG_BSD_PROCESS_ACCT is not set
- # CONFIG_TASKSTATS is not set
-@@ -41,6 +46,7 @@
- # CONFIG_IKCONFIG is not set
- CONFIG_SYSFS_DEPRECATED=y
- # CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
- CONFIG_INITRAMFS_SOURCE=""
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SYSCTL=y
-@@ -120,6 +126,7 @@
- # CONFIG_ARCH_IXP2000 is not set
- # CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
- # CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
-@@ -152,6 +159,7 @@
- # AT91 Feature Selections
- #
- # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
-@@ -174,6 +182,7 @@
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
- # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
-@@ -201,6 +210,7 @@
- # CONFIG_SPARSEMEM_STATIC is not set
- CONFIG_SPLIT_PTLOCK_CPUS=4096
- # CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -211,6 +221,7 @@
- CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
- # CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -236,7 +247,6 @@
- # Power management options
- #
- # CONFIG_PM is not set
--# CONFIG_APM is not set
-
- #
- # Networking
-@@ -333,6 +343,7 @@
- CONFIG_PREVENT_FIRMWARE_BUILD=y
- # CONFIG_FW_LOADER is not set
- # CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
- # CONFIG_SYS_HYPERVISOR is not set
-
- #
-@@ -430,6 +441,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -443,7 +455,6 @@
- CONFIG_BLK_DEV_RAM_COUNT=16
- CONFIG_BLK_DEV_RAM_SIZE=8192
- CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
--CONFIG_BLK_DEV_INITRD=y
- # CONFIG_CDROM_PKTCDVD is not set
- # CONFIG_ATA_OVER_ETH is not set
-
-@@ -531,6 +542,7 @@
- #
- CONFIG_NET_ETHERNET=y
- CONFIG_MII=y
-+CONFIG_MACB=y
- # CONFIG_SMC91X is not set
- # CONFIG_DM9000 is not set
-
-@@ -685,6 +697,7 @@
- # I2C Hardware Bus support
- #
- CONFIG_I2C_AT91=y
-+CONFIG_I2C_AT91_CLOCKRATE=100000
- # CONFIG_I2C_OCORES is not set
- # CONFIG_I2C_PARPORT_LIGHT is not set
- # CONFIG_I2C_STUB is not set
-@@ -722,6 +735,7 @@
- #
- # SPI Protocol Masters
- #
-+# CONFIG_SPI_AT25 is not set
-
- #
- # Dallas's 1-wire bus
-@@ -737,7 +751,11 @@
- #
- # Misc devices
- #
--# CONFIG_TIFM_CORE is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-
- #
- # LED devices
-@@ -766,15 +784,23 @@
- #
- # Graphics support
- #
--# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
- CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
- # CONFIG_FB_CFB_FILLRECT is not set
- # CONFIG_FB_CFB_COPYAREA is not set
- # CONFIG_FB_CFB_IMAGEBLIT is not set
-+# CONFIG_FB_SVGALIB is not set
- # CONFIG_FB_MACMODES is not set
- # CONFIG_FB_BACKLIGHT is not set
- # CONFIG_FB_MODE_HELPERS is not set
- # CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D15605 is not set
- # CONFIG_FB_S1D13XXX is not set
- # CONFIG_FB_VIRTUAL is not set
-
-@@ -789,7 +815,6 @@
- # Logo configuration
- #
- # CONFIG_LOGO is not set
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
- #
- # Sound
-@@ -800,6 +825,7 @@
- # HID Devices
- #
- CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-
- #
- # USB support
-@@ -814,9 +840,7 @@
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
--# CONFIG_USB_BANDWIDTH is not set
- # CONFIG_USB_DYNAMIC_MINORS is not set
--# CONFIG_USB_MULTITHREAD_PROBE is not set
- # CONFIG_USB_OTG is not set
-
- #
-@@ -824,7 +848,8 @@
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
-@@ -877,6 +902,7 @@
- # CONFIG_USB_ATI_REMOTE2 is not set
- # CONFIG_USB_KEYSPAN_REMOTE is not set
- # CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
-@@ -914,6 +940,7 @@
- # CONFIG_USB_RIO500 is not set
- # CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
- # CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
-@@ -923,6 +950,7 @@
- # CONFIG_USB_APPLEDISPLAY is not set
- # CONFIG_USB_LD is not set
- # CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
- # CONFIG_USB_TEST is not set
-
- #
-@@ -959,7 +987,6 @@
- # CONFIG_MMC_DEBUG is not set
- CONFIG_MMC_BLOCK=y
- CONFIG_MMC_AT91=m
--# CONFIG_MMC_TIFM_SD is not set
-
- #
- # Real Time Clock
-@@ -1136,15 +1163,16 @@
- # CONFIG_DEBUG_FS is not set
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
- CONFIG_LOG_BUF_SHIFT=14
- CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
- # CONFIG_DEBUG_RT_MUTEXES is not set
- # CONFIG_RT_MUTEX_TESTER is not set
- # CONFIG_DEBUG_SPINLOCK is not set
- # CONFIG_DEBUG_MUTEXES is not set
--# CONFIG_DEBUG_RWSEMS is not set
- # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
- # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
-@@ -1155,6 +1183,7 @@
- CONFIG_FRAME_POINTER=y
- CONFIG_FORCED_INLINING=y
- # CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
- CONFIG_DEBUG_USER=y
- # CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
-@@ -1180,5 +1209,7 @@
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
- CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
- CONFIG_PLIST=y
--CONFIG_IOMAP_COPY=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22.1-0rig/arch/arm/configs/cam60_defconfig linux-2.6.22.1/arch/arm/configs/cam60_defconfig
---- linux-2.6.22.1-0rig/arch/arm/configs/cam60_defconfig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/configs/cam60_defconfig 2007-07-17 23:35:19.000000000 +0200
-@@ -0,0 +1,954 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.20
-+# Tue May 1 21:06:33 2007
-+#
-+CONFIG_ARM=y
-+# CONFIG_GENERIC_TIME is not set
-+CONFIG_MMU=y
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# Code maturity level options
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+
-+#
-+# General setup
-+#
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+# CONFIG_SWAP is not set
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+# CONFIG_POSIX_MQUEUE is not set
-+# CONFIG_BSD_PROCESS_ACCT is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+# CONFIG_AUDIT is not set
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+# CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_EPOLL=y
-+CONFIG_SHMEM=y
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-+
-+#
-+# Loadable module support
-+#
-+CONFIG_MODULES=y
-+CONFIG_MODULE_UNLOAD=y
-+CONFIG_MODULE_FORCE_UNLOAD=y
-+# CONFIG_MODVERSIONS is not set
-+# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_KMOD is not set
-+
-+#
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+# CONFIG_IOSCHED_DEADLINE is not set
-+# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_CO285 is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_OMAP is not set
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
-+# CONFIG_ARCH_AT91RM9200 is not set
-+CONFIG_ARCH_AT91SAM9260=y
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-+
-+#
-+# AT91SAM9260 Board Type
-+#
-+# CONFIG_MACH_AT91SAM9260EK is not set
-+CONFIG_MACH_CAM60=y
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_ARM926T=y
-+CONFIG_CPU_32v5=y
-+CONFIG_CPU_ABRT_EV5TJ=y
-+CONFIG_CPU_CACHE_VIVT=y
-+CONFIG_CPU_COPY_V4WB=y
-+CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+# CONFIG_ARM_THUMB is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-+
-+#
-+# Bus support
-+#
-+
-+#
-+# PCCARD (PCMCIA/CardBus) support
-+#
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+# CONFIG_PREEMPT is not set
-+# CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
-+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x22000000
-+CONFIG_ZBOOT_ROM_BSS=0x20004000
-+# CONFIG_ZBOOT_ROM is not set
-+CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock3 rootfstype=jffs2 mem=64M"
-+# CONFIG_XIP_KERNEL is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+# CONFIG_VFP is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_BINFMT_AOUT is not set
-+# CONFIG_BINFMT_MISC is not set
-+# CONFIG_ARTHUR is not set
-+
-+#
-+# Power management options
-+#
-+# CONFIG_PM is not set
-+# CONFIG_APM is not set
-+
-+#
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+CONFIG_IP_PNP_BOOTP=y
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_SCTP is not set
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-+
-+#
-+# Memory Technology Devices (MTD)
-+#
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_CFI_INTELEXT is not set
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+# CONFIG_MTD_PHYSMAP is not set
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+CONFIG_MTD_DATAFLASH=y
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+# CONFIG_MTD_NAND is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# Parallel port support
-+#
-+# CONFIG_PARPORT is not set
-+
-+#
-+# Plug and Play support
-+#
-+
-+#
-+# Block devices
-+#
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+# CONFIG_BLK_DEV_LOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=8192
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-+CONFIG_BLK_DEV_INITRD=y
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+# CONFIG_SCSI is not set
-+# CONFIG_SCSI_NETLINK is not set
-+
-+#
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
-+#
-+# CONFIG_ATA is not set
-+
-+#
-+# Multi-device support (RAID and LVM)
-+#
-+# CONFIG_MD is not set
-+
-+#
-+# Fusion MPT device support
-+#
-+# CONFIG_FUSION is not set
-+
-+#
-+# IEEE 1394 (FireWire) support
-+#
-+
-+#
-+# I2O device support
-+#
-+
-+#
-+# Network device support
-+#
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+
-+#
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
-+# Ethernet (10 or 100Mbit)
-+#
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+CONFIG_MACB=y
-+# CONFIG_SMC91X is not set
-+# CONFIG_DM9000 is not set
-+
-+#
-+# Ethernet (1000 Mbit)
-+#
-+
-+#
-+# Ethernet (10000 Mbit)
-+#
-+
-+#
-+# Token Ring devices
-+#
-+
-+#
-+# Wireless LAN (non-hamradio)
-+#
-+# CONFIG_NET_RADIO is not set
-+
-+#
-+# Wan interfaces
-+#
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+
-+#
-+# ISDN subsystem
-+#
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=y
-+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+# CONFIG_SERIAL_8250 is not set
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_ATMEL=y
-+CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+CONFIG_LEGACY_PTYS=y
-+CONFIG_LEGACY_PTY_COUNT=256
-+
-+#
-+# IPMI
-+#
-+# CONFIG_IPMI_HANDLER is not set
-+
-+#
-+# Watchdog Cards
-+#
-+# CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
-+# CONFIG_NVRAM is not set
-+# CONFIG_DTLK is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+
-+#
-+# TPM devices
-+#
-+# CONFIG_TCG_TPM is not set
-+
-+#
-+# I2C support
-+#
-+# CONFIG_I2C is not set
-+
-+#
-+# SPI support
-+#
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
-+
-+#
-+# SPI Protocol Masters
-+#
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+# CONFIG_HWMON is not set
-+# CONFIG_HWMON_VID is not set
-+
-+#
-+# Misc devices
-+#
-+# CONFIG_TIFM_CORE is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
-+# Multimedia devices
-+#
-+# CONFIG_VIDEO_DEV is not set
-+
-+#
-+# Digital Video Broadcasting Devices
-+#
-+# CONFIG_DVB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Sound
-+#
-+# CONFIG_SOUND is not set
-+
-+#
-+# HID Devices
-+#
-+# CONFIG_HID is not set
-+
-+#
-+# USB support
-+#
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
-+# CONFIG_USB is not set
-+
-+#
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# USB Gadget Support
-+#
-+# CONFIG_USB_GADGET is not set
-+
-+#
-+# MMC/SD Card support
-+#
-+# CONFIG_MMC is not set
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+CONFIG_EXT3_FS_XATTR=y
-+# CONFIG_EXT3_FS_POSIX_ACL is not set
-+# CONFIG_EXT3_FS_SECURITY is not set
-+# CONFIG_EXT4DEV_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+CONFIG_FS_MBCACHE=y
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+# CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+# CONFIG_QUOTA is not set
-+CONFIG_DNOTIFY=y
-+# CONFIG_AUTOFS_FS is not set
-+CONFIG_AUTOFS4_FS=y
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+# CONFIG_MSDOS_FS is not set
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+CONFIG_RAMFS=y
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+CONFIG_CRAMFS=y
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+
-+#
-+# Network File Systems
-+#
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+# CONFIG_NFS_V4 is not set
-+# CONFIG_NFS_DIRECTIO is not set
-+# CONFIG_NFSD is not set
-+CONFIG_ROOT_NFS=y
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+# CONFIG_RPCSEC_GSS_KRB5 is not set
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-+
-+#
-+# Partition Types
-+#
-+# CONFIG_PARTITION_ADVANCED is not set
-+CONFIG_MSDOS_PARTITION=y
-+
-+#
-+# Native Language Support
-+#
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+CONFIG_NLS_CODEPAGE_850=y
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+# CONFIG_MAGIC_SYSRQ is not set
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+CONFIG_LOG_BUF_SHIFT=14
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+# CONFIG_DEBUG_MUTEXES is not set
-+# CONFIG_DEBUG_RWSEMS is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+# CONFIG_DEBUG_INFO is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
-+CONFIG_FRAME_POINTER=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+CONFIG_DEBUG_USER=y
-+# CONFIG_DEBUG_ERRORS is not set
-+CONFIG_DEBUG_LL=y
-+# CONFIG_DEBUG_ICEDCC is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+
-+#
-+# Cryptographic options
-+#
-+# CONFIG_CRYPTO is not set
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+# CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
-+CONFIG_CRC32=y
-+# CONFIG_LIBCRC32C is not set
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_IOMAP_COPY=y
-diff -urN linux-2.6.22.1-0rig/arch/arm/configs/kb9202_defconfig linux-2.6.22.1/arch/arm/configs/kb9202_defconfig
---- linux-2.6.22.1-0rig/arch/arm/configs/kb9202_defconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/configs/kb9202_defconfig 2007-07-17 23:35:19.000000000 +0200
-@@ -1,19 +1,31 @@
- #
- # Automatically generated make config: don't edit
--# Linux kernel version: 2.6.13-rc2
--# Sun Aug 14 19:26:59 2005
-+# Linux kernel version: 2.6.21
-+# Mon May 7 11:43:14 2007
- #
- CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+# CONFIG_GENERIC_TIME is not set
- CONFIG_MMU=y
--CONFIG_UID16=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
- CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
- CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_ZONE_DMA=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
- #
- # Code maturity level options
- #
--# CONFIG_EXPERIMENTAL is not set
--CONFIG_CLEAN_COMPILE=y
-+CONFIG_EXPERIMENTAL=y
- CONFIG_BROKEN_ON_SMP=y
- CONFIG_INIT_ENV_ARG_LIMIT=32
-
-@@ -21,54 +33,103 @@
- # General setup
- #
- CONFIG_LOCALVERSION=""
--# CONFIG_SWAP is not set
--# CONFIG_SYSVIPC is not set
--# CONFIG_BSD_PROCESS_ACCT is not set
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+# CONFIG_IPC_NS is not set
-+CONFIG_SYSVIPC_SYSCTL=y
-+CONFIG_POSIX_MQUEUE=y
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_UTS_NS is not set
-+CONFIG_AUDIT=y
-+CONFIG_IKCONFIG=y
-+CONFIG_IKCONFIG_PROC=y
-+CONFIG_SYSFS_DEPRECATED=y
-+# CONFIG_RELAY is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
- CONFIG_SYSCTL=y
--# CONFIG_AUDIT is not set
--CONFIG_HOTPLUG=y
--# CONFIG_KOBJECT_UEVENT is not set
--# CONFIG_IKCONFIG is not set
- # CONFIG_EMBEDDED is not set
-+CONFIG_UID16=y
-+CONFIG_SYSCTL_SYSCALL=y
- CONFIG_KALLSYMS=y
- # CONFIG_KALLSYMS_ALL is not set
--# CONFIG_KALLSYMS_EXTRA_PASS is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
- CONFIG_PRINTK=y
- CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
- CONFIG_BASE_FULL=y
- CONFIG_FUTEX=y
- CONFIG_EPOLL=y
--CONFIG_CC_OPTIMIZE_FOR_SIZE=y
- CONFIG_SHMEM=y
--CONFIG_CC_ALIGN_FUNCTIONS=0
--CONFIG_CC_ALIGN_LABELS=0
--CONFIG_CC_ALIGN_LOOPS=0
--CONFIG_CC_ALIGN_JUMPS=0
-+CONFIG_SLAB=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_RT_MUTEXES=y
- # CONFIG_TINY_SHMEM is not set
- CONFIG_BASE_SMALL=0
-+# CONFIG_SLOB is not set
-
- #
- # Loadable module support
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--CONFIG_OBSOLETE_MODPARM=y
--# CONFIG_MODULE_SRCVERSION_ALL is not set
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
- CONFIG_KMOD=y
-
- #
-+# Block layer
-+#
-+CONFIG_BLOCK=y
-+CONFIG_LBD=y
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+# CONFIG_DEFAULT_AS is not set
-+# CONFIG_DEFAULT_DEADLINE is not set
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
-+
-+#
- # System Type
- #
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+CONFIG_ARCH_AT91=y
- # CONFIG_ARCH_CLPS7500 is not set
- # CONFIG_ARCH_CLPS711X is not set
- # CONFIG_ARCH_CO285 is not set
- # CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
- # CONFIG_ARCH_FOOTBRIDGE is not set
--# CONFIG_ARCH_INTEGRATOR is not set
--# CONFIG_ARCH_IOP3XX is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IOP13XX is not set
- # CONFIG_ARCH_IXP4XX is not set
- # CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP23XX is not set
- # CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_PNX4008 is not set
- # CONFIG_ARCH_PXA is not set
- # CONFIG_ARCH_RPC is not set
- # CONFIG_ARCH_SA1100 is not set
-@@ -76,34 +137,52 @@
- # CONFIG_ARCH_SHARK is not set
- # CONFIG_ARCH_LH7A40X is not set
- # CONFIG_ARCH_OMAP is not set
--# CONFIG_ARCH_VERSATILE is not set
--# CONFIG_ARCH_IMX is not set
--# CONFIG_ARCH_H720X is not set
--# CONFIG_ARCH_AAEC2000 is not set
--CONFIG_ARCH_AT91=y
-+
-+#
-+# Atmel AT91 System-on-Chip
-+#
- CONFIG_ARCH_AT91RM9200=y
-+# CONFIG_ARCH_AT91SAM9260 is not set
-+# CONFIG_ARCH_AT91SAM9261 is not set
-+# CONFIG_ARCH_AT91SAM9263 is not set
-
- #
--# AT91RM9200 Implementations
-+# AT91RM9200 Board Type
- #
-+# CONFIG_MACH_ONEARM is not set
- # CONFIG_ARCH_AT91RM9200DK is not set
- # CONFIG_MACH_AT91RM9200EK is not set
- # CONFIG_MACH_CSB337 is not set
- # CONFIG_MACH_CSB637 is not set
- # CONFIG_MACH_CARMEVA is not set
-+# CONFIG_MACH_ATEB9200 is not set
- CONFIG_MACH_KB9200=y
-+# CONFIG_MACH_KAFA is not set
-+# CONFIG_MACH_CHUB is not set
-+
-+#
-+# AT91 Board Options
-+#
-+
-+#
-+# AT91 Feature Selections
-+#
-+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-+# CONFIG_ATMEL_TCLIB is not set
-
- #
- # Processor Type
- #
- CONFIG_CPU_32=y
- CONFIG_CPU_ARM920T=y
--CONFIG_CPU_32v4=y
-+CONFIG_CPU_32v4T=y
- CONFIG_CPU_ABRT_EV4T=y
- CONFIG_CPU_CACHE_V4WT=y
- CONFIG_CPU_CACHE_VIVT=y
- CONFIG_CPU_COPY_V4WB=y
- CONFIG_CPU_TLB_V4WBI=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-
- #
- # Processor Features
-@@ -112,24 +191,44 @@
- # CONFIG_CPU_ICACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_DISABLE is not set
- # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-+# CONFIG_OUTER_CACHE is not set
-
- #
- # Bus support
- #
--CONFIG_ISA_DMA_API=y
-
- #
- # PCCARD (PCMCIA/CardBus) support
- #
--# CONFIG_PCCARD is not set
-+CONFIG_PCCARD=m
-+# CONFIG_PCMCIA_DEBUG is not set
-+CONFIG_PCMCIA=m
-+CONFIG_PCMCIA_LOAD_CIS=y
-+CONFIG_PCMCIA_IOCTL=y
-+
-+#
-+# PC-card bridges
-+#
-+# CONFIG_AT91_CF is not set
-
- #
- # Kernel Features
- #
-+# CONFIG_PREEMPT is not set
- # CONFIG_NO_IDLE_HZ is not set
-+CONFIG_HZ=100
-+# CONFIG_AEABI is not set
- # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
- CONFIG_FLATMEM=y
- CONFIG_FLAT_NODE_MEM_MAP=y
-+# CONFIG_SPARSEMEM_STATIC is not set
-+CONFIG_SPLIT_PTLOCK_CPUS=4096
-+# CONFIG_RESOURCES_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=1
- # CONFIG_LEDS is not set
- CONFIG_ALIGNMENT_TRAP=y
-
-@@ -138,8 +237,10 @@
- #
- CONFIG_ZBOOT_ROM_TEXT=0x10000000
- CONFIG_ZBOOT_ROM_BSS=0x20040000
--CONFIG_ZBOOT_ROM=y
--CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
-+# CONFIG_ZBOOT_ROM is not set
-+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-
- #
- # Floating point emulation
-@@ -150,6 +251,7 @@
- #
- CONFIG_FPE_NWFPE=y
- # CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-
- #
- # Userspace binary formats
-@@ -165,6 +267,96 @@
- # CONFIG_PM is not set
-
- #
-+# Networking
-+#
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+# CONFIG_NETDEBUG is not set
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+# CONFIG_NET_KEY is not set
-+CONFIG_INET=y
-+CONFIG_IP_MULTICAST=y
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+# CONFIG_IP_PNP_DHCP is not set
-+# CONFIG_IP_PNP_BOOTP is not set
-+# CONFIG_IP_PNP_RARP is not set
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_IP_MROUTE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-+# CONFIG_INET_XFRM_MODE_BEET is not set
-+# CONFIG_INET_DIAG is not set
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_INET6_XFRM_TUNNEL is not set
-+# CONFIG_INET6_TUNNEL is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+
-+#
-+# DCCP Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_IP_DCCP is not set
-+
-+#
-+# SCTP Configuration (EXPERIMENTAL)
-+#
-+CONFIG_IP_SCTP=m
-+# CONFIG_SCTP_DBG_MSG is not set
-+# CONFIG_SCTP_DBG_OBJCNT is not set
-+# CONFIG_SCTP_HMAC_NONE is not set
-+# CONFIG_SCTP_HMAC_SHA1 is not set
-+CONFIG_SCTP_HMAC_MD5=y
-+
-+#
-+# TIPC Configuration (EXPERIMENTAL)
-+#
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+
-+#
-+# QoS and/or fair queueing
-+#
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_IEEE80211 is not set
-+
-+#
- # Device Drivers
- #
-
-@@ -173,13 +365,95 @@
- #
- CONFIG_STANDALONE=y
- CONFIG_PREVENT_FIRMWARE_BUILD=y
--# CONFIG_FW_LOADER is not set
--CONFIG_DEBUG_DRIVER=y
-+CONFIG_FW_LOADER=y
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+
-+#
-+# Connector - unified userspace <-> kernelspace linker
-+#
-+# CONFIG_CONNECTOR is not set
-
- #
- # Memory Technology Devices (MTD)
- #
--# CONFIG_MTD is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+# CONFIG_MTD_OBSOLETE_CHIPS is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+CONFIG_MTD_COMPLEX_MAPPINGS=y
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+
-+#
-+# NAND Flash Device Drivers
-+#
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+CONFIG_MTD_NAND_AT91=y
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+
-+#
-+# OneNAND Flash Device Drivers
-+#
-+# CONFIG_MTD_ONENAND is not set
-
- #
- # Parallel port support
-@@ -189,6 +463,7 @@
- #
- # Plug and Play support
- #
-+# CONFIG_PNPACPI is not set
-
- #
- # Block devices
-@@ -196,28 +471,27 @@
- # CONFIG_BLK_DEV_COW_COMMON is not set
- CONFIG_BLK_DEV_LOOP=y
- # CONFIG_BLK_DEV_CRYPTOLOOP is not set
--CONFIG_BLK_DEV_NBD=y
-+# CONFIG_BLK_DEV_NBD is not set
- # CONFIG_BLK_DEV_UB is not set
- CONFIG_BLK_DEV_RAM=y
- CONFIG_BLK_DEV_RAM_COUNT=16
--CONFIG_BLK_DEV_RAM_SIZE=4096
--CONFIG_BLK_DEV_INITRD=y
--CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- # CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-
- #
--# IO Schedulers
-+# ATA/ATAPI/MFM/RLL support
- #
--CONFIG_IOSCHED_NOOP=y
--CONFIG_IOSCHED_AS=y
--CONFIG_IOSCHED_DEADLINE=y
--CONFIG_IOSCHED_CFQ=y
--# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_IDE is not set
-
- #
- # SCSI device support
- #
-+# CONFIG_RAID_ATTRS is not set
- CONFIG_SCSI=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
- CONFIG_SCSI_PROC_FS=y
-
- #
-@@ -233,97 +507,61 @@
- #
- # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
- #
--# CONFIG_SCSI_MULTI_LUN is not set
--# CONFIG_SCSI_CONSTANTS is not set
--# CONFIG_SCSI_LOGGING is not set
-+CONFIG_SCSI_MULTI_LUN=y
-+CONFIG_SCSI_CONSTANTS=y
-+CONFIG_SCSI_LOGGING=y
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-
- #
--# SCSI Transport Attributes
-+# SCSI Transports
- #
--# CONFIG_SCSI_SPI_ATTRS is not set
-+CONFIG_SCSI_SPI_ATTRS=m
- # CONFIG_SCSI_FC_ATTRS is not set
- # CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-
- #
- # SCSI low-level drivers
- #
--# CONFIG_SCSI_SATA is not set
-+# CONFIG_ISCSI_TCP is not set
- # CONFIG_SCSI_DEBUG is not set
-
- #
--# Multi-device support (RAID and LVM)
--#
--# CONFIG_MD is not set
--
--#
--# Fusion MPT device support
-+# PCMCIA SCSI adapter support
- #
--# CONFIG_FUSION is not set
-+# CONFIG_PCMCIA_AHA152X is not set
-+# CONFIG_PCMCIA_FDOMAIN is not set
-+# CONFIG_PCMCIA_NINJA_SCSI is not set
-+# CONFIG_PCMCIA_QLOGIC is not set
-+# CONFIG_PCMCIA_SYM53C500 is not set
-
- #
--# IEEE 1394 (FireWire) support
-+# Serial ATA (prod) and Parallel ATA (experimental) drivers
- #
-+# CONFIG_ATA is not set
-
- #
--# I2O device support
-+# Multi-device support (RAID and LVM)
- #
-+# CONFIG_MD is not set
-
- #
--# Networking support
-+# Fusion MPT device support
- #
--CONFIG_NET=y
-+# CONFIG_FUSION is not set
-
- #
--# Networking options
-+# IEEE 1394 (FireWire) support
- #
--CONFIG_PACKET=y
--# CONFIG_PACKET_MMAP is not set
--CONFIG_UNIX=y
--# CONFIG_NET_KEY is not set
--CONFIG_INET=y
--CONFIG_IP_MULTICAST=y
--# CONFIG_IP_ADVANCED_ROUTER is not set
--CONFIG_IP_FIB_HASH=y
--CONFIG_IP_PNP=y
--CONFIG_IP_PNP_DHCP=y
--# CONFIG_IP_PNP_BOOTP is not set
--# CONFIG_IP_PNP_RARP is not set
--# CONFIG_NET_IPIP is not set
--# CONFIG_NET_IPGRE is not set
--# CONFIG_IP_MROUTE is not set
--# CONFIG_SYN_COOKIES is not set
--# CONFIG_INET_AH is not set
--# CONFIG_INET_ESP is not set
--# CONFIG_INET_IPCOMP is not set
--# CONFIG_INET_TUNNEL is not set
--# CONFIG_IP_TCPDIAG is not set
--# CONFIG_IP_TCPDIAG_IPV6 is not set
--# CONFIG_TCP_CONG_ADVANCED is not set
--CONFIG_TCP_CONG_BIC=y
--# CONFIG_IPV6 is not set
--# CONFIG_NETFILTER is not set
--# CONFIG_BRIDGE is not set
--# CONFIG_VLAN_8021Q is not set
--# CONFIG_DECNET is not set
--# CONFIG_LLC2 is not set
--# CONFIG_IPX is not set
--# CONFIG_ATALK is not set
-
- #
--# QoS and/or fair queueing
-+# I2O device support
- #
--# CONFIG_NET_SCHED is not set
--# CONFIG_NET_CLS_ROUTE is not set
-
- #
--# Network testing
-+# Network device support
- #
--# CONFIG_NET_PKTGEN is not set
--# CONFIG_NETPOLL is not set
--# CONFIG_NET_POLL_CONTROLLER is not set
--# CONFIG_HAMRADIO is not set
--# CONFIG_IRDA is not set
--# CONFIG_BT is not set
- CONFIG_NETDEVICES=y
- # CONFIG_DUMMY is not set
- # CONFIG_BONDING is not set
-@@ -331,6 +569,11 @@
- # CONFIG_TUN is not set
-
- #
-+# PHY device support
-+#
-+# CONFIG_PHYLIB is not set
-+
-+#
- # Ethernet (10 or 100Mbit)
- #
- CONFIG_NET_ETHERNET=y
-@@ -357,11 +600,20 @@
- # CONFIG_NET_RADIO is not set
-
- #
-+# PCMCIA network device support
-+#
-+# CONFIG_NET_PCMCIA is not set
-+
-+#
- # Wan interfaces
- #
- # CONFIG_WAN is not set
- # CONFIG_PPP is not set
- # CONFIG_SLIP is not set
-+# CONFIG_SHAPER is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-
- #
- # ISDN subsystem
-@@ -372,6 +624,7 @@
- # Input device support
- #
- CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-
- #
- # Userland interfaces
-@@ -397,9 +650,7 @@
- #
- # Hardware I/O ports
- #
--CONFIG_SERIO=y
--# CONFIG_SERIO_SERPORT is not set
--# CONFIG_SERIO_RAW is not set
-+# CONFIG_SERIO is not set
- # CONFIG_GAMEPORT is not set
-
- #
-@@ -408,6 +659,7 @@
- CONFIG_VT=y
- CONFIG_VT_CONSOLE=y
- CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
- # CONFIG_SERIAL_NONSTANDARD is not set
-
- #
-@@ -420,11 +672,11 @@
- #
- CONFIG_SERIAL_ATMEL=y
- CONFIG_SERIAL_ATMEL_CONSOLE=y
-+# CONFIG_SERIAL_ATMEL_TTYAT is not set
- CONFIG_SERIAL_CORE=y
- CONFIG_SERIAL_CORE_CONSOLE=y
- CONFIG_UNIX98_PTYS=y
--CONFIG_LEGACY_PTYS=y
--CONFIG_LEGACY_PTY_COUNT=256
-+# CONFIG_LEGACY_PTYS is not set
-
- #
- # IPMI
-@@ -435,21 +687,23 @@
- # Watchdog Cards
- #
- # CONFIG_WATCHDOG is not set
-+# CONFIG_HW_RANDOM is not set
- # CONFIG_NVRAM is not set
--# CONFIG_RTC is not set
--# CONFIG_AT91RM9200_RTC is not set
- # CONFIG_DTLK is not set
- # CONFIG_R3964 is not set
-
- #
--# Ftape, the floppy tape device driver
-+# PCMCIA character devices
- #
-+# CONFIG_SYNCLINK_CS is not set
-+# CONFIG_CARDMAN_4000 is not set
-+# CONFIG_CARDMAN_4040 is not set
- # CONFIG_RAW_DRIVER is not set
-
- #
- # TPM devices
- #
--# CONFIG_AT91_SPI is not set
-+# CONFIG_TCG_TPM is not set
-
- #
- # I2C support
-@@ -457,10 +711,50 @@
- # CONFIG_I2C is not set
-
- #
-+# SPI support
-+#
-+# CONFIG_SPI is not set
-+# CONFIG_SPI_MASTER is not set
-+
-+#
-+# Dallas's 1-wire bus
-+#
-+# CONFIG_W1 is not set
-+
-+#
-+# Hardware Monitoring support
-+#
-+CONFIG_HWMON=y
-+# CONFIG_HWMON_VID is not set
-+# CONFIG_SENSORS_ABITUGURU is not set
-+# CONFIG_SENSORS_F71805F is not set
-+# CONFIG_SENSORS_PC87427 is not set
-+# CONFIG_SENSORS_VT1211 is not set
-+CONFIG_HWMON_DEBUG_CHIP=y
-+
-+#
- # Misc devices
- #
-
- #
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_SM501 is not set
-+
-+#
-+# LED devices
-+#
-+# CONFIG_NEW_LEDS is not set
-+
-+#
-+# LED drivers
-+#
-+
-+#
-+# LED Triggers
-+#
-+
-+#
- # Multimedia devices
- #
- # CONFIG_VIDEO_DEV is not set
-@@ -469,17 +763,57 @@
- # Digital Video Broadcasting Devices
- #
- # CONFIG_DVB is not set
-+# CONFIG_USB_DABUSB is not set
-
- #
- # Graphics support
- #
--# CONFIG_FB is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_BACKLIGHT_CLASS_DEVICE=y
-+# CONFIG_LCD_CLASS_DEVICE is not set
-+CONFIG_BACKLIGHT_KB920x=y
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+CONFIG_FB_MODE_HELPERS=y
-+CONFIG_FB_TILEBLITTING=y
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+CONFIG_FB_S1D15605=y
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_VIRTUAL is not set
-
- #
- # Console display driver support
- #
- # CONFIG_VGA_CONSOLE is not set
- CONFIG_DUMMY_CONSOLE=y
-+CONFIG_FRAMEBUFFER_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-+CONFIG_FONTS=y
-+# CONFIG_FONT_8x8 is not set
-+# CONFIG_FONT_8x16 is not set
-+# CONFIG_FONT_6x11 is not set
-+# CONFIG_FONT_7x14 is not set
-+# CONFIG_FONT_PEARL_8x8 is not set
-+# CONFIG_FONT_ACORN_8x8 is not set
-+CONFIG_FONT_MINI_4x6=y
-+# CONFIG_FONT_SUN8x16 is not set
-+# CONFIG_FONT_SUN12x22 is not set
-+# CONFIG_FONT_10x18 is not set
-+
-+#
-+# Logo configuration
-+#
-+# CONFIG_LOGO is not set
-
- #
- # Sound
-@@ -487,82 +821,98 @@
- # CONFIG_SOUND is not set
-
- #
-+# HID Devices
-+#
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+
-+#
- # USB support
- #
- CONFIG_USB_ARCH_HAS_HCD=y
- CONFIG_USB_ARCH_HAS_OHCI=y
-+# CONFIG_USB_ARCH_HAS_EHCI is not set
- CONFIG_USB=y
--CONFIG_USB_DEBUG=y
-+# CONFIG_USB_DEBUG is not set
-
- #
- # Miscellaneous USB options
- #
- CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+# CONFIG_USB_OTG is not set
-
- #
- # USB Host Controller Drivers
- #
- # CONFIG_USB_ISP116X_HCD is not set
- CONFIG_USB_OHCI_HCD=y
--# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
- CONFIG_USB_OHCI_LITTLE_ENDIAN=y
- # CONFIG_USB_SL811_HCD is not set
-
- #
- # USB Device Class drivers
- #
--# CONFIG_USB_BLUETOOTH_TTY is not set
- # CONFIG_USB_ACM is not set
- # CONFIG_USB_PRINTER is not set
-
- #
--# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-+#
-+
-+#
-+# may also be needed; see USB_STORAGE Help for more information
- #
- CONFIG_USB_STORAGE=y
--CONFIG_USB_STORAGE_DEBUG=y
-+# CONFIG_USB_STORAGE_DEBUG is not set
-+# CONFIG_USB_STORAGE_DATAFAB is not set
- # CONFIG_USB_STORAGE_FREECOM is not set
- # CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+CONFIG_USB_LIBUSUAL=y
-
- #
- # USB Input Devices
- #
--# CONFIG_USB_HID is not set
--
--#
--# USB HID Boot Protocol drivers
--#
--# CONFIG_USB_KBD is not set
--# CONFIG_USB_MOUSE is not set
-+CONFIG_USB_HID=y
-+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-+# CONFIG_HID_FF is not set
-+# CONFIG_USB_HIDDEV is not set
- # CONFIG_USB_AIPTEK is not set
- # CONFIG_USB_WACOM is not set
- # CONFIG_USB_ACECAD is not set
- # CONFIG_USB_KBTAB is not set
- # CONFIG_USB_POWERMATE is not set
--# CONFIG_USB_MTOUCH is not set
--# CONFIG_USB_ITMTOUCH is not set
--# CONFIG_USB_EGALAX is not set
-+# CONFIG_USB_TOUCHSCREEN is not set
-+# CONFIG_USB_YEALINK is not set
- # CONFIG_USB_XPAD is not set
- # CONFIG_USB_ATI_REMOTE is not set
-+# CONFIG_USB_ATI_REMOTE2 is not set
-+# CONFIG_USB_KEYSPAN_REMOTE is not set
-+# CONFIG_USB_APPLETOUCH is not set
-+# CONFIG_USB_GTCO is not set
-
- #
- # USB Imaging devices
- #
-+# CONFIG_USB_MDC800 is not set
- # CONFIG_USB_MICROTEK is not set
-
- #
--# USB Multimedia devices
--#
--# CONFIG_USB_DABUSB is not set
--
--#
--# Video4Linux support is needed for USB Multimedia device support
--#
--
--#
- # USB Network Adapters
- #
-+# CONFIG_USB_CATC is not set
- # CONFIG_USB_KAWETH is not set
- # CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET_MII is not set
- # CONFIG_USB_USBNET is not set
- # CONFIG_USB_MON is not set
-
-@@ -580,12 +930,23 @@
- #
- # CONFIG_USB_EMI62 is not set
- # CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_AUERSWALD is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
- # CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
- # CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
- # CONFIG_USB_CYTHERM is not set
--# CONFIG_USB_PHIDGETKIT is not set
--# CONFIG_USB_PHIDGETSERVO is not set
-+# CONFIG_USB_PHIDGET is not set
- # CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-
- #
- # USB DSL modem support
-@@ -599,36 +960,51 @@
- #
- # MMC/SD Card support
- #
--# CONFIG_MMC is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_AT91=y
-+
-+#
-+# Real Time Clock
-+#
-+CONFIG_RTC_LIB=y
-+# CONFIG_RTC_CLASS is not set
-
- #
- # File systems
- #
- CONFIG_EXT2_FS=y
- CONFIG_EXT2_FS_XATTR=y
--# CONFIG_EXT2_FS_POSIX_ACL is not set
--# CONFIG_EXT2_FS_SECURITY is not set
-+CONFIG_EXT2_FS_POSIX_ACL=y
-+CONFIG_EXT2_FS_SECURITY=y
- # CONFIG_EXT2_FS_XIP is not set
- CONFIG_EXT3_FS=y
- CONFIG_EXT3_FS_XATTR=y
--# CONFIG_EXT3_FS_POSIX_ACL is not set
--# CONFIG_EXT3_FS_SECURITY is not set
-+CONFIG_EXT3_FS_POSIX_ACL=y
-+CONFIG_EXT3_FS_SECURITY=y
-+# CONFIG_EXT4DEV_FS is not set
- CONFIG_JBD=y
- # CONFIG_JBD_DEBUG is not set
- CONFIG_FS_MBCACHE=y
- # CONFIG_REISERFS_FS is not set
- # CONFIG_JFS_FS is not set
--
--#
--# XFS support
--#
-+CONFIG_FS_POSIX_ACL=y
- # CONFIG_XFS_FS is not set
-+# CONFIG_GFS2_FS is not set
-+# CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_QUOTA is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
- CONFIG_DNOTIFY=y
--CONFIG_AUTOFS_FS=y
-+# CONFIG_AUTOFS_FS is not set
- CONFIG_AUTOFS4_FS=y
-+# CONFIG_FUSE_FS is not set
-
- #
- # CD-ROM/DVD Filesystems
-@@ -643,25 +1019,40 @@
- CONFIG_MSDOS_FS=y
- CONFIG_VFAT_FS=y
- CONFIG_FAT_DEFAULT_CODEPAGE=437
--CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
- # CONFIG_NTFS_FS is not set
-
- #
- # Pseudo filesystems
- #
- CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
- CONFIG_SYSFS=y
--CONFIG_DEVPTS_FS_XATTR=y
--# CONFIG_DEVPTS_FS_SECURITY is not set
- CONFIG_TMPFS=y
--# CONFIG_TMPFS_XATTR is not set
-+# CONFIG_TMPFS_POSIX_ACL is not set
- # CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
-+CONFIG_CONFIGFS_FS=y
-
- #
- # Miscellaneous filesystems
- #
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
- # CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
- # CONFIG_CRAMFS is not set
- # CONFIG_VXFS_FS is not set
- # CONFIG_HPFS_FS is not set
-@@ -675,16 +1066,23 @@
- CONFIG_NFS_FS=y
- CONFIG_NFS_V3=y
- # CONFIG_NFS_V3_ACL is not set
-+CONFIG_NFS_V4=y
-+# CONFIG_NFS_DIRECTIO is not set
- # CONFIG_NFSD is not set
- CONFIG_ROOT_NFS=y
- CONFIG_LOCKD=y
- CONFIG_LOCKD_V4=y
- CONFIG_NFS_COMMON=y
- CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
- # CONFIG_SMB_FS is not set
- # CONFIG_CIFS is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+# CONFIG_9P_FS is not set
-
- #
- # Partition Types
-@@ -734,26 +1132,51 @@
- # CONFIG_NLS_ISO8859_15 is not set
- # CONFIG_NLS_KOI8_R is not set
- # CONFIG_NLS_KOI8_U is not set
--# CONFIG_NLS_UTF8 is not set
-+CONFIG_NLS_UTF8=y
-+
-+#
-+# Distributed Lock Manager
-+#
-+# CONFIG_DLM is not set
-+
-+#
-+# Profiling support
-+#
-+# CONFIG_PROFILING is not set
-
- #
- # Kernel hacking
- #
- # CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+# CONFIG_DEBUG_FS is not set
-+# CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
--# CONFIG_MAGIC_SYSRQ is not set
--CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_LOG_BUF_SHIFT=17
-+CONFIG_DETECT_SOFTLOCKUP=y
- # CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
- # CONFIG_DEBUG_SLAB is not set
--# CONFIG_DEBUG_SPINLOCK is not set
--# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+CONFIG_DEBUG_SPINLOCK=y
-+# CONFIG_DEBUG_MUTEXES is not set
-+CONFIG_DEBUG_SPINLOCK_SLEEP=y
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
- # CONFIG_DEBUG_KOBJECT is not set
- CONFIG_DEBUG_BUGVERBOSE=y
- # CONFIG_DEBUG_INFO is not set
--# CONFIG_DEBUG_FS is not set
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_LIST is not set
- CONFIG_FRAME_POINTER=y
--CONFIG_DEBUG_USER=y
--CONFIG_DEBUG_ERRORS=y
-+CONFIG_FORCED_INLINING=y
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_DEBUG_USER is not set
-+# CONFIG_DEBUG_ERRORS is not set
- CONFIG_DEBUG_LL=y
- # CONFIG_DEBUG_ICEDCC is not set
-
-@@ -766,7 +1189,43 @@
- #
- # Cryptographic options
- #
--# CONFIG_CRYPTO is not set
-+CONFIG_CRYPTO=y
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_HASH=m
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_HMAC=m
-+# CONFIG_CRYPTO_XCBC is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_ECB is not set
-+CONFIG_CRYPTO_CBC=y
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_TEST is not set
-
- #
- # Hardware crypto devices
-@@ -775,6 +1234,14 @@
- #
- # Library routines
- #
-+CONFIG_BITREVERSE=y
- # CONFIG_CRC_CCITT is not set
-+# CONFIG_CRC16 is not set
- CONFIG_CRC32=y
- # CONFIG_LIBCRC32C is not set
-+CONFIG_AUDIT_GENERIC=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91rm9200.c linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91rm9200.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200.c 2007-07-17 23:35:19.000000000 +0200
-@@ -267,6 +267,33 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91rm9200_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91RM9200_BASE_TCB0,
-+ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ },
-+ [1] = {
-+ .physaddr = AT91RM9200_BASE_TCB1,
-+ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 },
-+ .clk = { &tc3_clk, &tc4_clk, &tc5_clk },
-+ },
-+};
-+
-+#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks))
-+
-+#else
-+#define at91rm9200_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91RM9200 processor initialization
- * -------------------------------------------------------------------- */
- void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-@@ -288,6 +315,9 @@
-
- /* Initialize GPIO subsystem */
- at91_gpio_init(at91rm9200_gpio, banks);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91rm9200_tc_init();
- }
-
-
-@@ -301,28 +331,28 @@
- static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-- 0, /* Parallel IO Controller D */
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-- 6, /* USART 3 */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller D */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
-+ 5, /* USART 3 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 5, /* Serial Synchronous Controller 2 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* Ethernet MAC */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91rm9200_devices.c 2007-07-17 23:35:19.000000000 +0200
-@@ -477,7 +477,18 @@
- * SPI
- * -------------------------------------------------------------------- */
-
--#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
-+#define SPI_DEVNAME "at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
-+#define SPI_DEVNAME "atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
- static u64 spi_dmamask = 0xffffffffUL;
-
- static struct resource spi_resources[] = {
-@@ -494,7 +505,7 @@
- };
-
- static struct platform_device at91rm9200_spi_device = {
-- .name = "at91_spi",
-+ .name = SPI_DEVNAME,
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
-@@ -603,6 +614,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9260.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9260.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9260.c 2007-07-17 23:35:19.000000000 +0200
-@@ -269,6 +269,33 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9260_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9260_BASE_TCB0,
-+ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ },
-+ [1] = {
-+ .physaddr = AT91SAM9260_BASE_TCB1,
-+ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 },
-+ .clk = { &tc3_clk, &tc4_clk, &tc5_clk },
-+ },
-+};
-+
-+#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks))
-+
-+#else
-+#define at91sam9260_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9260 processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -315,6 +342,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9260_gpio, 3);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9260_tc_init();
- }
-
- /* --------------------------------------------------------------------
-@@ -327,30 +357,30 @@
- static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
- 0, /* Analog-to-Digital Converter */
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller */
- 0,
- 0,
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
-- 6, /* USART 3 */
-- 6, /* USART 4 */
-- 6, /* USART 5 */
-+ 5, /* USART 3 */
-+ 5, /* USART 4 */
-+ 5, /* USART 5 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9260_devices.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9260_devices.c 2007-07-17 23:35:19.000000000 +0200
-@@ -524,6 +524,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9261.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9261.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9261.c 2007-07-17 23:35:19.000000000 +0200
-@@ -247,6 +247,28 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9261_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9261_BASE_TCB0,
-+ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ }
-+};
-+
-+#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks))
-+
-+#else
-+#define at91sam9261_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9261 processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -267,6 +289,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9261_gpio, 3);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9261_tc_init();
- }
-
- /* --------------------------------------------------------------------
-@@ -279,25 +304,25 @@
- static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C */
-- 0,
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C */
-+ 0,
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
-- 4, /* USB Device Port */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 5, /* Serial Synchronous Controller 2 */
-+ 2, /* USB Device Port */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 3, /* LCD Controller */
- 0,
- 0,
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9261_devices.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9261_devices.c 2007-07-17 23:35:19.000000000 +0200
-@@ -14,6 +14,9 @@
- #include <asm/mach/map.h>
-
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -522,6 +525,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9263.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9263.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9263.c 2007-07-17 23:35:19.000000000 +0200
-@@ -273,6 +273,28 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9263_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9263_BASE_TCB0,
-+ .irq = { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB },
-+ .clk = { &tcb_clk, &tcb_clk, &tcb_clk },
-+ }
-+};
-+
-+#define at91sam9263_tc_init() atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks))
-+
-+#else
-+#define at91sam9263_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9263 processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -292,6 +314,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9263_gpio, 5);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9263_tc_init();
- }
-
- /* --------------------------------------------------------------------
-@@ -304,34 +329,34 @@
- static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
-- 0, /* Parallel IO Controller A */
-- 0, /* Parallel IO Controller B */
-- 0, /* Parallel IO Controller C, D and E */
-+ 1, /* Parallel IO Controller A */
-+ 1, /* Parallel IO Controller B */
-+ 1, /* Parallel IO Controller C, D and E */
- 0,
- 0,
-- 6, /* USART 0 */
-- 6, /* USART 1 */
-- 6, /* USART 2 */
-+ 5, /* USART 0 */
-+ 5, /* USART 1 */
-+ 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
-- 4, /* CAN */
-- 0, /* Two-Wire Interface */
-- 6, /* Serial Peripheral Interface 0 */
-- 6, /* Serial Peripheral Interface 1 */
-- 5, /* Serial Synchronous Controller 0 */
-- 5, /* Serial Synchronous Controller 1 */
-- 6, /* AC97 Controller */
-+ 3, /* CAN */
-+ 6, /* Two-Wire Interface */
-+ 5, /* Serial Peripheral Interface 0 */
-+ 5, /* Serial Peripheral Interface 1 */
-+ 4, /* Serial Synchronous Controller 0 */
-+ 4, /* Serial Synchronous Controller 1 */
-+ 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0,
- 0, /* 2D Graphic Engine */
-- 3, /* USB Device Port */
-+ 2, /* USB Device Port */
- 0, /* Image Sensor Interface */
- 3, /* LDC Controller */
- 0, /* DMA Controller */
- 0,
-- 3, /* USB Host port */
-+ 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
- };
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9263_devices.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9263_devices.c 2007-07-17 23:35:19.000000000 +0200
-@@ -13,6 +13,9 @@
- #include <asm/mach/map.h>
-
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -625,6 +628,56 @@
-
-
- /* --------------------------------------------------------------------
-+ * Image Sensor Interface
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-+
-+struct resource isi_resources[] = {
-+ [0] = {
-+ .start = AT91SAM9263_BASE_ISI,
-+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = AT91SAM9263_ID_ISI,
-+ .end = AT91SAM9263_ID_ISI,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device at91sam9263_isi_device = {
-+ .name = "at91_isi",
-+ .id = -1,
-+ .resource = isi_resources,
-+ .num_resources = ARRAY_SIZE(isi_resources),
-+};
-+
-+void __init at91_add_device_isi(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
-+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
-+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
-+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
-+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
-+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
-+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
-+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
-+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
-+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
-+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
-+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
-+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
-+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
-+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
-+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-+}
-+#else
-+void __init at91_add_device_isi(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-@@ -715,6 +768,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9rl.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9rl.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl.c 2007-07-17 23:35:19.000000000 +0200
-@@ -246,6 +246,28 @@
-
-
- /* --------------------------------------------------------------------
-+ * Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9rl_tcblocks[] = {
-+ [0] = {
-+ .physaddr = AT91SAM9RL_BASE_TCB0,
-+ .irq = { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 },
-+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk },
-+ }
-+};
-+
-+#define at91sam9rl_tc_init() atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks))
-+
-+#else
-+#define at91sam9rl_tc_init() do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
- * AT91SAM9RL processor initialization
- * -------------------------------------------------------------------- */
-
-@@ -284,6 +306,9 @@
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9rl_gpio, 4);
-+
-+ /* Initialize the Timer/Counter blocks */
-+ at91sam9rl_tc_init();
- }
-
- /* --------------------------------------------------------------------
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/at91sam9rl_devices.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/at91sam9rl_devices.c 2007-07-17 23:35:19.000000000 +0200
-@@ -370,6 +370,32 @@
- #endif
-
-
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+ .name = "at91_leds",
-+ .id = -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+ if (!nr)
-+ return;
-+
-+ at91_leds.dev.platform_data = leds;
-+
-+ for ( ; nr; nr--, leds++) {
-+ leds->index = nr; /* first record stores number of leds */
-+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+ }
-+
-+ platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-cam60.c linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-cam60.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-cam60.c 2007-07-17 23:35:19.000000000 +0200
-@@ -0,0 +1,148 @@
-+/*
-+ * KwikByte CAM60
-+ *
-+ * based on board-sam9260ek.c
-+ * Copyright (C) 2005 SAN People
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 5 = USART0 .. USART5
-+ * 6 = DBGU
-+ */
-+static struct at91_uart_config __initdata cam60_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 1,
-+ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
-+};
-+
-+static void __init cam60_map_io(void)
-+{
-+ /* Initialize processor: 10 MHz crystal */
-+ at91sam9260_initialize(10000000);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&cam60_uart_config);
-+}
-+
-+static void __init cam60_init_irq(void)
-+{
-+ at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata cam60_spi_partitions[] = {
-+ {
-+ .name = "BOOT1",
-+ .offset = 0,
-+ .size = 4 * 1056,
-+ },
-+ {
-+ .name = "BOOT2",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 256 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 2222 * 1056,
-+ },
-+ {
-+ .name = "file system",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
-+ .name = "spi_flash",
-+ .parts = cam60_spi_partitions,
-+ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
-+};
-+#endif
-+
-+static struct spi_board_info cam60_spi_devices[] = {
-+#if defined(CONFIG_MTD_DATAFLASH)
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ .bus_num = 0,
-+ .platform_data = &cam60_spi_flash_platform_data
-+ },
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct __initdata at91_eth_data cam60_macb_data = {
-+ .phy_irq_pin = AT91_PIN_PB5,
-+ .is_rmii = 0,
-+};
-+
-+
-+static void __init cam60_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* SPI */
-+ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-+ /* Ethernet */
-+ at91_add_device_eth(&cam60_macb_data);
-+}
-+
-+MACHINE_START(CAM60, "KwikByte CAM60")
-+ /* Maintainer: KwikByte */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91sam926x_timer,
-+ .map_io = cam60_map_io,
-+ .init_irq = cam60_init_irq,
-+ .init_machine = cam60_board_init,
-+MACHINE_END
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-chub.c linux-2.6.22.1/arch/arm/mach-at91/board-chub.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-chub.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-chub.c 2007-07-17 23:35:19.000000000 +0200
-@@ -0,0 +1,132 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-chub.c
-+ *
-+ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
-+ * by Kuten Ivan
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+/*
-+ * Serial port configuration.
-+ * 0 .. 3 = USART0 .. USART3
-+ * 4 = DBGU
-+ */
-+static struct at91_uart_config __initdata chub_uart_config = {
-+ .console_tty = 0, /* ttyS0 */
-+ .nr_tty = 5,
-+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init chub_init_irq(void)
-+{
-+ at91rm9200_init_interrupts(NULL);
-+}
-+
-+static void __init chub_map_io(void)
-+{
-+ /* Initialize clocks: 18.432 MHz crystal */
-+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+ /* Setup the serial ports and console */
-+ at91_init_serial(&chub_uart_config);
-+}
-+
-+static struct at91_eth_data __initdata chub_eth_data = {
-+ .phy_irq_pin = AT91_PIN_PB29,
-+ .is_rmii = 0,
-+};
-+
-+static struct mtd_partition __initdata chub_nand_partition[] = {
-+ {
-+ .name = "NAND Partition 1",
-+ .offset = 0,
-+ .size = MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-+{
-+ *num_partitions = ARRAY_SIZE(chub_nand_partition);
-+ return chub_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata chub_nand_data = {
-+ .ale = 22,
-+ .cle = 21,
-+ .enable_pin = AT91_PIN_PA27,
-+ .partition_info = nand_partitions,
-+};
-+
-+static struct spi_board_info chub_spi_devices[] = {
-+ { /* DataFlash chip */
-+ .modalias = "mtd_dataflash",
-+ .chip_select = 0,
-+ .max_speed_hz = 15 * 1000 * 1000,
-+ },
-+};
-+
-+static void __init chub_board_init(void)
-+{
-+ /* Serial */
-+ at91_add_device_serial();
-+ /* I2C */
-+ at91_add_device_i2c();
-+ /* Ethernet */
-+ at91_add_device_eth(&chub_eth_data);
-+ /* SPI */
-+ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
-+ /* NAND Flash */
-+ at91_add_device_nand(&chub_nand_data);
-+ /* Disable write protect for NAND */
-+ at91_set_gpio_output(AT91_PIN_PB7, 1);
-+ /* Power enable for 3x RS-232 and 1x RS-485 */
-+ at91_set_gpio_output(AT91_PIN_PB9, 1);
-+ /* Disable write protect for FRAM */
-+ at91_set_gpio_output(AT91_PIN_PA21, 1);
-+ /* Disable write protect for Dataflash */
-+ at91_set_gpio_output(AT91_PIN_PA19, 1);
-+}
-+
-+MACHINE_START(CHUB, "Promwad Chub")
-+ /* Maintainer: Ivan Kuten AT Promwad DOT com */
-+ .phys_io = AT91_BASE_SYS,
-+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+ .boot_params = AT91_SDRAM_BASE + 0x100,
-+ .timer = &at91rm9200_timer,
-+ .map_io = chub_map_io,
-+ .init_irq = chub_init_irq,
-+ .init_machine = chub_board_init,
-+MACHINE_END
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-csb337.c linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-csb337.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-csb337.c 2007-07-17 23:35:19.000000000 +0200
-@@ -24,6 +24,7 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/interrupt.h>
- #include <linux/mtd/physmap.h>
-
- #include <asm/hardware.h>
-@@ -59,6 +60,7 @@
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb337_uart_config);
-@@ -149,6 +151,55 @@
- .num_resources = ARRAY_SIZE(csb_flash_resources),
- };
-
-+static struct at91_gpio_led csb337_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB0,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB1,
-+ .trigger = "timer",
-+ },
-+ {
-+ .name = "led2",
-+ .gpio = AT91_PIN_PB2,
-+ }
-+};
-+
-+#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
-+static irqreturn_t switch_irq_handler(int irq, void *context)
-+{
-+ return IRQ_HANDLED;
-+}
-+
-+static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
-+{
-+ int res;
-+
-+ res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
-+ if (res == 0)
-+ enable_irq_wake(irq);
-+}
-+
-+static void __init csb300_switches(void)
-+{
-+#ifdef CONFIG_CSB300_WAKE_SW0
-+ at91_set_A_periph(AT91_PIN_PB29, 1); /* IRQ0 */
-+ switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
-+#endif
-+#ifdef CONFIG_CSB300_WAKE_SW1
-+ at91_set_gpio_input(AT91_PIN_PB28, 1);
-+ at91_set_deglitch(AT91_PIN_PB28, 1);
-+ switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
-+#endif
-+ /* there's also SW2 at PA21, GPIO or TIOA2 */
-+}
-+#else
-+static void __init csb300_switches(void) {}
-+#endif
-+
- static void __init csb337_board_init(void)
- {
- /* Serial */
-@@ -168,8 +219,12 @@
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
- at91_add_device_mmc(0, &csb337_mmc_data);
-+ /* LEDS */
-+ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
- /* NOR flash */
- platform_device_register(&csb_flash);
-+ /* Switches on CSB300 */
-+ csb300_switches();
- }
-
- MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-dk.c linux-2.6.22.1/arch/arm/mach-at91/board-dk.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-dk.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-dk.c 2007-07-17 23:35:19.000000000 +0200
-@@ -73,6 +73,185 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x30000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x30200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init dk_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 2 */
-+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0x00},
-+ {S1DREG_GPIO_CNF1, 0x00},
-+ {S1DREG_GPIO_CTL0, 0x08},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+ .initregs = dk_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
-+ .platform_init_video = dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource dk_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &dk_s1dfb_pdata,
-+ },
-+ .resource = dk_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+ platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -151,7 +330,7 @@
- #define DK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data dk_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource dk_flash_resource = {
-@@ -170,6 +349,13 @@
- .num_resources = 1,
- };
-
-+static struct at91_gpio_led dk_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB2,
-+ .trigger = "timer",
-+ }
-+};
-
- static void __init dk_board_init(void)
- {
-@@ -200,8 +386,10 @@
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
-+ /* LEDs */
-+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
- /* VGA */
--// dk_add_device_video();
-+ dk_add_device_video();
- }
-
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-ek.c linux-2.6.22.1/arch/arm/mach-at91/board-ek.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-ek.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-ek.c 2007-07-17 23:35:19.000000000 +0200
-@@ -73,6 +73,187 @@
- at91rm9200_init_interrupts(NULL);
- }
-
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE 0x40000000L
-+#define AT91_FB_REG_SIZE 0x200
-+#define AT91_FB_VMEM_BASE 0x40200000L
-+#define AT91_FB_VMEM_SIZE 0x140000L
-+
-+static void __init ek_init_video(void)
-+{
-+ /* NWAIT Signal */
-+ at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+ /* Initialization of the Static Memory Controller for Chip Select 3 */
-+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
-+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
-+ | AT91_SMC_TDF_(1) /* float time */
-+ );
-+
-+ at91_ics1523_init();
-+}
-+
-+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
-+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
-+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
-+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
-+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
-+ {S1DREG_GPIO_CTL0, 0x00},
-+ {S1DREG_GPIO_CTL1, 0x00},
-+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
-+ {S1DREG_LCD_CLK_CNF, 0x00},
-+ {S1DREG_CRT_CLK_CNF, 0x00},
-+ {S1DREG_MPLUG_CLK_CNF, 0x00},
-+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
-+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
-+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
-+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
-+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
-+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
-+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
-+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
-+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
-+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
-+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
-+ {S1DREG_LCD_DISP_START0, 0x00},
-+ {S1DREG_LCD_DISP_START1, 0xC8},
-+ {S1DREG_LCD_DISP_START2, 0x00},
-+ {S1DREG_LCD_MEM_OFF0, 0x80},
-+ {S1DREG_LCD_MEM_OFF1, 0x02},
-+ {S1DREG_LCD_PIX_PAN, 0x00},
-+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
-+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
-+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
-+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
-+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
-+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
-+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
-+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
-+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
-+ {S1DREG_TV_OUT_CTL, 0x10},
-+ {0x005E, 0x9F},
-+ {0x005F, 0x00},
-+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
-+ {S1DREG_CRT_DISP_START0, 0x00},
-+ {S1DREG_CRT_DISP_START1, 0x00},
-+ {S1DREG_CRT_DISP_START2, 0x00},
-+ {S1DREG_CRT_MEM_OFF0, 0x80},
-+ {S1DREG_CRT_MEM_OFF1, 0x02},
-+ {S1DREG_CRT_PIX_PAN, 0x00},
-+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
-+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
-+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_LCD_CUR_START, 0x01},
-+ {S1DREG_LCD_CUR_XPOS0, 0x00},
-+ {S1DREG_LCD_CUR_XPOS1, 0x00},
-+ {S1DREG_LCD_CUR_YPOS0, 0x00},
-+ {S1DREG_LCD_CUR_YPOS1, 0x00},
-+ {S1DREG_LCD_CUR_BCTL0, 0x00},
-+ {S1DREG_LCD_CUR_GCTL0, 0x00},
-+ {S1DREG_LCD_CUR_RCTL0, 0x00},
-+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
-+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
-+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
-+ {S1DREG_CRT_CUR_START, 0x01},
-+ {S1DREG_CRT_CUR_XPOS0, 0x00},
-+ {S1DREG_CRT_CUR_XPOS1, 0x00},
-+ {S1DREG_CRT_CUR_YPOS0, 0x00},
-+ {S1DREG_CRT_CUR_YPOS1, 0x00},
-+ {S1DREG_CRT_CUR_BCTL0, 0x00},
-+ {S1DREG_CRT_CUR_GCTL0, 0x00},
-+ {S1DREG_CRT_CUR_RCTL0, 0x00},
-+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
-+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
-+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CTL0, 0x00},
-+ {S1DREG_BBLT_CC_EXP, 0x00},
-+ {S1DREG_BBLT_OP, 0x00},
-+ {S1DREG_BBLT_SRC_START0, 0x00},
-+ {S1DREG_BBLT_SRC_START1, 0x00},
-+ {S1DREG_BBLT_SRC_START2, 0x00},
-+ {S1DREG_BBLT_DST_START0, 0x00},
-+ {S1DREG_BBLT_DST_START1, 0x00},
-+ {S1DREG_BBLT_DST_START2, 0x00},
-+ {S1DREG_BBLT_MEM_OFF0, 0x00},
-+ {S1DREG_BBLT_MEM_OFF1, 0x00},
-+ {S1DREG_BBLT_WIDTH0, 0x00},
-+ {S1DREG_BBLT_WIDTH1, 0x00},
-+ {S1DREG_BBLT_HEIGHT0, 0x00},
-+ {S1DREG_BBLT_HEIGHT1, 0x00},
-+ {S1DREG_BBLT_BGC0, 0x00},
-+ {S1DREG_BBLT_BGC1, 0x00},
-+ {S1DREG_BBLT_FGC0, 0x00},
-+ {S1DREG_BBLT_FGC1, 0x00},
-+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
-+ {S1DREG_LKUP_ADDR, 0x00},
-+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
-+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
-+ {S1DREG_CPU2MEM_WDOGT, 0x00},
-+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+ .initregs = ek_s1dfb_initregs,
-+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
-+ .platform_init_video = ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource ek_s1dfb_resource[] = {
-+ [0] = { /* video mem */
-+ .name = "s1d13806 memory",
-+ .start = AT91_FB_VMEM_BASE,
-+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = { /* video registers */
-+ .name = "s1d13806 registers",
-+ .start = AT91_FB_REG_BASE,
-+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+ .name = "s1d13806fb",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &s1dfb_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &ek_s1dfb_pdata,
-+ },
-+ .resource = ek_s1dfb_resource,
-+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+ platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-@@ -113,7 +294,7 @@
- #define EK_FLASH_SIZE 0x200000
-
- static struct physmap_flash_data ek_flash_data = {
-- .width = 2,
-+ .width = 2,
- };
-
- static struct resource ek_flash_resource = {
-@@ -132,6 +313,18 @@
- .num_resources = 1,
- };
-
-+static struct at91_gpio_led ek_leds[] = {
-+ {
-+ .name = "led0",
-+ .gpio = AT91_PIN_PB1,
-+ .trigger = "heartbeat",
-+ },
-+ {
-+ .name = "led1",
-+ .gpio = AT91_PIN_PB2,
-+ .trigger = "timer",
-+ }
-+};
-
- static void __init ek_board_init(void)
- {
-@@ -158,8 +351,10 @@
- #endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
-+ /* LEDs */
-+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
--// ek_add_device_video();
-+ ek_add_device_video();
- }
-
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-kb9202.c linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-kb9202.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-kb9202.c 2007-07-17 23:35:19.000000000 +0200
-@@ -37,6 +37,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-
-+#include <asm/arch/at91rm9200_mc.h>
-+
- #include "generic.h"
-
-
-@@ -111,6 +113,48 @@
- .partition_info = nand_partitions,
- };
-
-+
-+#if defined(CONFIG_FB_S1D15605)
-+#warning "Rather pass reset pin via platform_data"
-+static struct resource kb9202_lcd_resources[] = {
-+ [0] = {
-+ .start = AT91_CHIPSELECT_2,
-+ .end = AT91_CHIPSELECT_2 + 0x200FF,
-+ .flags = IORESOURCE_MEM
-+ },
-+ [1] = { /* reset pin */
-+ .start = AT91_PIN_PC22,
-+ .end = AT91_PIN_PC22,
-+ .flags = IORESOURCE_MEM
-+ },
-+};
-+
-+static struct platform_device kb9202_lcd_device = {
-+ .name = "s1d15605fb",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
-+ .resource = kb9202_lcd_resources,
-+};
-+
-+static void __init kb9202_add_device_lcd(void)
-+{
-+ /* In case the boot loader did not set the chip select mode and timing */
-+ at91_sys_write(AT91_SMC_CSR(2),
-+ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
-+ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
-+
-+ /* Backlight pin = output, off */
-+ at91_set_gpio_output(AT91_PIN_PC23, 0);
-+
-+ /* Reset pin = output, in reset */
-+ at91_set_gpio_output(AT91_PIN_PC22, 0);
-+
-+ platform_device_register(&kb9202_lcd_device);
-+}
-+#else
-+static void __init kb9202_add_device_lcd(void) {}
-+#endif
-+
- static void __init kb9202_board_init(void)
- {
- /* Serial */
-@@ -129,6 +173,8 @@
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
-+ /* LCD */
-+ kb9202_add_device_lcd();
- }
-
- MACHINE_START(KB9200, "KB920x")
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-sam9261ek.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-sam9261ek.c 2007-07-17 23:35:19.000000000 +0200
-@@ -27,6 +27,9 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/ads7846.h>
- #include <linux/dm9000.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -251,6 +254,7 @@
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91SAM9261_ID_IRQ0,
-+ .controller_data = AT91_PIN_PA28, /* CS pin */
- },
- #endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-@@ -271,6 +275,65 @@
- };
-
-
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D50VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+ if (on)
-+ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
-+ else
-+ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
- static void __init ek_board_init(void)
- {
- /* Serial */
-@@ -296,6 +359,8 @@
- /* MMC */
- at91_add_device_mmc(0, &ek_mmc_data);
- #endif
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
- }
-
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/board-sam9263ek.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/board-sam9263ek.c 2007-07-17 23:35:20.000000000 +0200
-@@ -26,6 +26,9 @@
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/ads7846.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -202,6 +205,65 @@
-
-
- /*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+ {
-+ .name = "TX09D50VM1CCA @ 60",
-+ .refresh = 60,
-+ .xres = 240, .yres = 320,
-+ .pixclock = KHZ2PICOS(4965),
-+
-+ .left_margin = 1, .right_margin = 33,
-+ .upper_margin = 1, .lower_margin = 0,
-+ .hsync_len = 5, .vsync_len = 1,
-+
-+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+ .manufacturer = "HIT",
-+ .monitor = "TX09D70VM1CCA",
-+
-+ .modedb = at91_tft_vga_modes,
-+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
-+ .hfmin = 15000,
-+ .hfmax = 64000,
-+ .vfmin = 50,
-+ .vfmax = 150,
-+};
-+
-+#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-+ | ATMEL_LCDC_DISTYPE_TFT \
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+ if (on)
-+ at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
-+ else
-+ at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+ .default_bpp = 16,
-+ .default_dmacon = ATMEL_LCDC_DMAEN,
-+ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
-+ .default_monspecs = &at91fb_default_monspecs,
-+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
-+ .guard_time = 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
-+/*
- * AC97
- */
- static struct atmel_ac97_data ek_ac97_data = {
-@@ -230,6 +292,8 @@
- at91_add_device_nand(&ek_nand_data);
- /* I2C */
- at91_add_device_i2c();
-+ /* LCD Controller */
-+ at91_add_device_lcdc(&ek_lcdc_data);
- /* AC97 */
- at91_add_device_ac97(&ek_ac97_data);
- }
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/clock.c linux-2.6.22.1/arch/arm/mach-at91/clock.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/clock.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/clock.c 2007-07-17 23:44:51.000000000 +0200
-@@ -32,6 +32,7 @@
- #include <asm/arch/cpu.h>
-
- #include "clock.h"
-+#include "generic.h"
-
-
- /*
-@@ -254,6 +255,23 @@
-
- /*------------------------------------------------------------------------*/
-
-+#ifdef CONFIG_PM
-+
-+int clk_must_disable(struct clk *clk)
-+{
-+ if (!at91_suspend_entering_slow_clock())
-+ return 0;
-+
-+ while (clk->parent)
-+ clk = clk->parent;
-+ return clk != &clk32k;
-+}
-+EXPORT_SYMBOL(clk_must_disable);
-+
-+#endif
-+
-+/*------------------------------------------------------------------------*/
-+
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
- /*
-@@ -362,7 +380,7 @@
-
- static int at91_clk_show(struct seq_file *s, void *unused)
- {
-- u32 scsr, pcsr, sr;
-+ u32 scsr, pcsr, sr, i;
- struct clk *clk;
-
- seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-@@ -372,6 +390,9 @@
- seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
-+#warning "Hard-coded PCK"
-+ for (i = 0; i < 4; i++)
-+ seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
- seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-
- seq_printf(s, "\n");
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/generic.h linux-2.6.22.1/arch/arm/mach-at91/generic.h
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/generic.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/generic.h 2007-07-17 23:35:23.000000000 +0200
-@@ -36,6 +36,7 @@
- /* Power Management */
- extern void at91_irq_suspend(void);
- extern void at91_irq_resume(void);
-+extern int at91_suspend_entering_slow_clock(void);
-
- /* GPIO */
- #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/ics1523.c linux-2.6.22.1/arch/arm/mach-at91/ics1523.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/ics1523.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/ics1523.c 2007-07-17 23:35:23.000000000 +0200
-@@ -0,0 +1,207 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ * Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+ int sclock;
-+
-+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+ if (sclock % 10 >= 5)
-+ sclock = (sclock /10) - 5;
-+ else
-+ sclock = (sclock /10)- 6;
-+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
-+
-+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ /* Wait TXcomplete ... */
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ }
-+
-+ if (Status & AT91_TWI_TXCOMP) {
-+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+ return ICS1523_ACCESS_OK;
-+ }
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+ int Status, nb_trial;
-+
-+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+ at91_twi_write(AT91_TWI_IADR, reg_address);
-+ at91_twi_write(AT91_TWI_THR, data_out);
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+
-+ nb_trial = 0;
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+ nb_trial++;
-+ if (Status & AT91_TWI_ERROR) {
-+ /* If Underrun OR NACK - Start again */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+ /* Program temporizing period (300us) */
-+ udelay(300);
-+ }
-+ Status = at91_twi_read(AT91_TWI_SR);
-+ };
-+
-+ if (Status & AT91_TWI_TXCOMP)
-+ return ICS1523_ACCESS_OK;
-+ else
-+ return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+ int nb_trial;
-+ int ack = ICS1523_ACCESS_OK;
-+ unsigned int status = 0xffffffff;
-+ struct clk *twi_clk;
-+
-+ /* Map in TWI peripheral */
-+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+ if (!twi_base)
-+ return -ENOMEM;
-+
-+ /* pins used for TWI interface */
-+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
-+ at91_set_multi_drive(AT91_PIN_PA25, 1);
-+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
-+ at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+ /* Enable the TWI clock */
-+ twi_clk = clk_get(NULL, "twi_clk");
-+ if (IS_ERR(twi_clk))
-+ return ICS1523_ACCESS_ERROR;
-+ clk_enable(twi_clk);
-+
-+ /* Disable interrupts */
-+ at91_twi_write(AT91_TWI_IDR, -1);
-+
-+ /* Reset peripheral */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+ /* Set Master mode */
-+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+ /* Set TWI Clock Waveform Generator Register */
-+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
-+
-+ /* ICS1523 Initialisation */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+ nb_trial = 0;
-+ do {
-+ nb_trial++;
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+ /* Program 1ms temporizing period */
-+ mdelay(1);
-+
-+ /* All done - cleanup */
-+ iounmap(twi_base);
-+ clk_disable(twi_clk);
-+ clk_put(twi_clk);
-+
-+ return ack;
-+}
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/Kconfig linux-2.6.22.1/arch/arm/mach-at91/Kconfig
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Kconfig 2007-07-17 23:35:19.000000000 +0200
-@@ -97,6 +97,12 @@
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-+config MACH_CHUB
-+ bool "Promwad Chub board"
-+ depends on ARCH_AT91RM9200
-+ help
-+ Select this if you are using Promwad's Chub board.
-+
- endif
-
- # ----------------------------------------------------------
-@@ -121,6 +127,13 @@
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-+config MACH_CAM60
-+ bool "KwikByte CAM60 board"
-+ depends on ARCH_AT91SAM9260
-+ help
-+ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
-+ <http://www.kwikbyte.com>
-+
- endif
-
- # ----------------------------------------------------------
-@@ -184,6 +197,20 @@
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
-+config CSB300_WAKE_SW0
-+ bool "CSB300 SW0 irq0 wakeup"
-+ depends on MACH_CSB337 && PM
-+ help
-+ If you have a CSB300 connected to your CSB337, this lets
-+ SW0 serve as a wakeup button. It uses IRQ0.
-+
-+config CSB300_WAKE_SW1
-+ bool "CSB300 SW1 gpio wakeup"
-+ depends on MACH_CSB337 && PM
-+ help
-+ If you have a CSB300 connected to your CSB337, this lets
-+ SW1 serve as a wakeup button. It uses GPIO.
-+
- # ----------------------------------------------------------
-
- comment "AT91 Feature Selections"
-@@ -194,6 +221,20 @@
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-+config ATMEL_TCLIB
-+ bool "Timer/Counter Library"
-+ help
-+ Select this if you want a library to allocate the Timer/Counter
-+ blocks found on many Atmel processors. This facilitates using
-+ these modules despite processor differences.
-+
-+config AT91_SLOW_CLOCK
-+ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
-+ depends on PM && EXPERIMENTAL
-+ help
-+ Select this if you wish to put the CPU into slow clock mode
-+ while in the "Suspend to RAM" state, to save more power.
-+
- endmenu
-
- endif
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/Makefile linux-2.6.22.1/arch/arm/mach-at91/Makefile
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/Makefile 2007-07-17 23:35:19.000000000 +0200
-@@ -8,6 +8,8 @@
- obj- :=
-
- obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
-+obj-$(CONFIG_ATMEL_TCLIB) += tclib.o
-
- # CPU-specific support
- obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-@@ -26,10 +28,12 @@
- obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
- obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
- obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-+obj-$(CONFIG_MACH_CHUB) += board-chub.o
- obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-+obj-$(CONFIG_MACH_CAM60) += board-cam60.o
-
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-@@ -51,7 +55,7 @@
- obj-$(CONFIG_LEDS) += $(led-y)
-
- # VGA support
--#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-
-
- ifeq ($(CONFIG_PM_DEBUG),y)
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/pm.c linux-2.6.22.1/arch/arm/mach-at91/pm.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/pm.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/arch/arm/mach-at91/pm.c 2007-07-17 23:35:23.000000000 +0200
-@@ -63,6 +63,7 @@
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-+#warning "SAM9260 only has 3 programmable clocks."
- static int at91_pm_verify_clocks(void)
- {
- unsigned long scsr;
-@@ -103,20 +104,15 @@
- }
-
- /*
-- * Call this from platform driver suspend() to see how deeply to suspend.
-+ * This is called from clk_must_disable(), to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
-- *
-- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
-- * the very same problem (but not using at91 main_clk), and it'd be better
-- * to add one generic API rather than lots of platform-specific ones.
- */
- int at91_suspend_entering_slow_clock(void)
- {
- return (target_state == PM_SUSPEND_MEM);
- }
--EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
- static void (*slow_clock)(void);
-@@ -205,16 +201,23 @@
- .enter = at91_pm_enter,
- };
-
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91rm9200_slow_clock(void);
-+extern u32 at91rm9200_slow_clock_sz;
-+#endif
-+
- static int __init at91_pm_init(void)
- {
-- printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-- /* REVISIT allocations of SRAM should be dynamically managed.
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+ /*
-+ * REVISIT allocations of SRAM should be dynamically managed.
- * FIQ handlers and other components will want SRAM/TCM too...
- */
-- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-+ slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+ printk("AT91: Power Management (with slow clock mode)\n");
-+#else
-+ printk("AT91: Power Management\n");
- #endif
-
- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/pm_slowclock.S linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/pm_slowclock.S 2007-07-17 23:35:23.000000000 +0200
-@@ -0,0 +1,172 @@
-+/*
-+ * arch/arm/mach-at91/pm_slow_clock.S
-+ *
-+ * Copyright (C) 2006 Savin Zlobec
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#define MCKRDY_TIMEOUT 1000
-+#define MOSCRDY_TIMEOUT 1000
-+#define PLLALOCK_TIMEOUT 1000
-+
-+ .macro wait_mckrdy
-+ mov r2, #MCKRDY_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_MCKRDY
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_moscrdy
-+ mov r2, #MOSCRDY_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_MOSCS
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_pllalock
-+ mov r2, #PLLALOCK_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_LOCKA
-+ beq 1b
-+2:
-+ .endm
-+
-+ .macro wait_plladis
-+ mov r2, #PLLALOCK_TIMEOUT
-+1: sub r2, r2, #1
-+ cmp r2, #0
-+ beq 2f
-+ ldr r3, [r1, #AT91_PMC_SR]
-+ tst r3, #AT91_PMC_LOCKA
-+ bne 1b
-+2:
-+ .endm
-+
-+ .text
-+
-+ENTRY(at91rm9200_slow_clock)
-+
-+ ldr r1, .at91_va_base_sys
-+
-+ /* Put SDRAM in self refresh mode */
-+
-+ b 1f
-+ .align 5
-+1: mcr p15, 0, r0, c7, c10, 4
-+ mov r2, #1
-+ str r2, [r1, #AT91_SDRAMC_SRR]
-+
-+ /* Save Master clock setting */
-+
-+ ldr r2, [r1, #AT91_PMC_MCKR]
-+ str r2, .saved_mckr
-+
-+ /*
-+ * Set the Master clock source to slow clock
-+ *
-+ * First set the CSS field, wait for MCKRDY
-+ * and than set the PRES and MDIV fields.
-+ *
-+ * See eratta #2[78] for details.
-+ */
-+
-+ bic r2, r2, #3
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+ mov r2, #0
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ /* Save PLLA setting and disable it */
-+
-+ ldr r2, [r1, #AT91_CKGR_PLLAR]
-+ str r2, .saved_pllar
-+
-+ mov r2, #0
-+ str r2, [r1, #AT91_CKGR_PLLAR]
-+
-+ wait_plladis
-+
-+ /* Turn off the main oscillator */
-+
-+ ldr r2, [r1, #AT91_CKGR_MOR]
-+ bic r2, r2, #AT91_PMC_MOSCEN
-+ str r2, [r1, #AT91_CKGR_MOR]
-+
-+ /* Wait for interrupt */
-+
-+ mcr p15, 0, r0, c7, c0, 4
-+
-+ /* Turn on the main oscillator */
-+
-+ ldr r2, [r1, #AT91_CKGR_MOR]
-+ orr r2, r2, #AT91_PMC_MOSCEN
-+ str r2, [r1, #AT91_CKGR_MOR]
-+
-+ wait_moscrdy
-+
-+ /* Restore PLLA setting */
-+
-+ ldr r2, .saved_pllar
-+ str r2, [r1, #AT91_CKGR_PLLAR]
-+
-+ wait_pllalock
-+
-+ /*
-+ * Restore master clock setting
-+ *
-+ * First set PRES if it was not 0,
-+ * than set CSS and MDIV fields.
-+ * After every change wait for
-+ * MCKRDY.
-+ *
-+ * See eratta #2[78] for details.
-+ */
-+
-+ ldr r2, .saved_mckr
-+ tst r2, #0x1C
-+ beq 2f
-+ and r2, r2, #0x1C
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+2: ldr r2, .saved_mckr
-+ str r2, [r1, #AT91_PMC_MCKR]
-+
-+ wait_mckrdy
-+
-+ mov pc, lr
-+
-+.saved_mckr:
-+ .word 0
-+
-+.saved_pllar:
-+ .word 0
-+
-+.at91_va_base_sys:
-+ .word AT91_VA_BASE_SYS
-+
-+ENTRY(at91rm9200_slow_clock_sz)
-+ .word .-at91rm9200_slow_clock
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/tclib.c linux-2.6.22.1/arch/arm/mach-at91/tclib.c
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/tclib.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/tclib.c 2007-07-17 23:35:23.000000000 +0200
-@@ -0,0 +1,17 @@
-+#include <linux/clk.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock *blocks;
-+static int nblocks;
-+
-+/*
-+ * Called from the processor-specific init to register the TC Blocks.
-+ */
-+void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n)
-+{
-+ blocks = tcblocks;
-+ nblocks = n;
-+}
-diff -urN linux-2.6.22.1-0rig/arch/arm/mach-at91/tclib.h linux-2.6.22.1/arch/arm/mach-at91/tclib.h
---- linux-2.6.22.1-0rig/arch/arm/mach-at91/tclib.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/arch/arm/mach-at91/tclib.h 2007-07-17 23:35:23.000000000 +0200
-@@ -0,0 +1,11 @@
-+
-+#define TC_PER_TCB 3
-+
-+struct atmel_tcblock {
-+ u32 physaddr;
-+ void __iomem *ioaddr;
-+ struct clk *clk[TC_PER_TCB];
-+ int irq[TC_PER_TCB];
-+};
-+
-+extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
-diff -urN linux-2.6.22.1-0rig/drivers/char/at91_spi.c linux-2.6.22.1/drivers/char/at91_spi.c
---- linux-2.6.22.1-0rig/drivers/char/at91_spi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/char/at91_spi.c 2007-07-17 23:35:23.000000000 +0200
-@@ -0,0 +1,336 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock; /* protect access to SPI bus */
-+static int current_device = -1; /* currently selected SPI device */
-+static struct clk *spi_clk; /* SPI clock */
-+static void __iomem *spi_base; /* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+ /* Ensure that requested device is valid */
-+ if ((device < 0) || (device >= NR_SPI_DEVICES))
-+ panic("at91_spi: spi_access_bus called with invalid device");
-+
-+ if (spi_enabled == 0) {
-+ clk_enable(spi_clk); /* Enable Peripheral clock */
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+#ifdef DEBUG_SPI
-+ printk("SPI on\n");
-+#endif
-+ }
-+ spi_enabled++;
-+
-+ /* Lock the SPI bus */
-+ down(&spi_lock);
-+ current_device = device;
-+
-+ /* Configure SPI bus for device */
-+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+ if (device != current_device)
-+ panic("at91_spi: spi_release called with invalid device");
-+
-+ /* Release the SPI bus */
-+ current_device = -1;
-+ up(&spi_lock);
-+
-+ spi_enabled--;
-+ if (spi_enabled == 0) {
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_disable(spi_clk); /* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+ printk("SPI off\n");
-+#endif
-+ }
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ int tx_size;
-+
-+ if (!list)
-+ panic("at91_spi: spi_transfer called with NULL transfer list");
-+ if (current_device == -1)
-+ panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ /* Store transfer list */
-+ device->xfers = list;
-+ list->curr = 0;
-+
-+ /* Assume there must be at least one transfer */
-+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+ /* Program PDC registers */
-+ at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+ at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+ /* Is there a second transfer? */
-+ if (list->nr_transfers > 1) {
-+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+ /* Program Next PDC registers */
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+ }
-+ else {
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+
-+ // TODO: If we are doing consecutive transfers (at high speed, or
-+ // small buffers), then it might be worth modifying the 'Delay between
-+ // Consecutive Transfers' in the CSR registers.
-+ // This is an issue if we cannot chain the next buffer fast enough
-+ // in the interrupt handler.
-+
-+ /* Enable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
-+ wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI transfer end\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+ unsigned int status;
-+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+ struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+ printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+ if (!list)
-+ panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
-+
-+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+ device->tx = device->txnext; /* move next transfer to current transfer */
-+ device->rx = device->rxnext;
-+
-+ list->curr = list->curr + 1;
-+ if (list->curr == list->nr_transfers) { /* all transfers complete */
-+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
-+
-+ /* Disable transmitter and receiver */
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ device->xfers = NULL;
-+ complete(&transfer_complete);
-+ }
-+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
-+ device->txnext = 0;
-+ device->rxnext = 0;
-+ at91_spi_write(ATMEL_PDC_TNCR, 0);
-+ at91_spi_write(ATMEL_PDC_RNCR, 0);
-+ }
-+ else {
-+ int i = (list->curr)+1;
-+
-+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+ int i;
-+ unsigned long scbr;
-+ struct resource *res;
-+
-+ init_MUTEX(&spi_lock);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENXIO;
-+
-+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+ return -EBUSY;
-+
-+ spi_base = ioremap(res->start, res->end - res->start + 1);
-+ if (!spi_base) {
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENOMEM;
-+ }
-+
-+ spi_clk = clk_get(NULL, "spi_clk");
-+ if (IS_ERR(spi_clk)) {
-+ printk(KERN_ERR "at91_spi: no clock defined\n");
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -ENODEV;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
-+
-+ /*
-+ * Calculate the correct SPI baud-rate divisor.
-+ */
-+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+ scbr = scbr + 1; /* round up */
-+
-+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+ /* Set Chip Select registers to good defaults */
-+ for (i = 0; i < 4; i++) {
-+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+ }
-+
-+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+ memset(&spi_dev, 0, sizeof(spi_dev));
-+ spi_dev[0].pcs = 0xE;
-+ spi_dev[1].pcs = 0xD;
-+ spi_dev[2].pcs = 0xB;
-+ spi_dev[3].pcs = 0x7;
-+
-+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+ clk_put(spi_clk);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+ return -EBUSY;
-+ }
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
-+
-+ return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
-+ clk_put(spi_clk);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ iounmap(spi_base);
-+ release_mem_region(res->start, res->end - res->start + 1);
-+
-+ free_irq(AT91RM9200_ID_SPI, 0);
-+ return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+ .probe = at91spi_probe,
-+ .remove = __devexit_p(at91spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+ return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+ platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN linux-2.6.22.1-0rig/drivers/char/at91_spidev.c linux-2.6.22.1/drivers/char/at91_spidev.c
---- linux-2.6.22.1-0rig/drivers/char/at91_spidev.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/char/at91_spidev.c 2007-07-17 23:35:23.000000000 +0200
-@@ -0,0 +1,236 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ * Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+ unsigned int spi_device = (unsigned int) file->private_data;
-+
-+ struct mm_struct * mm;
-+ struct page ** maplist;
-+ struct spi_transfer_list* list;
-+ int pgcount;
-+
-+ unsigned int ofs, pagelen;
-+ int res, i, err;
-+
-+ if (!count) {
-+ return 0;
-+ }
-+
-+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!list) {
-+ return -ENOMEM;
-+ }
-+
-+ mm = current->mm;
-+
-+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+ if (pgcount >= MAX_SPI_TRANSFERS) {
-+ kfree(list);
-+ return -EFBIG;
-+ }
-+
-+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+ if (!maplist) {
-+ kfree(list);
-+ return -ENOMEM;
-+ }
-+ flush_cache_all();
-+ down_read(&mm->mmap_sem);
-+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+ up_read(&mm->mmap_sem);
-+
-+ if (err < 0) {
-+ kfree(list);
-+ kfree(maplist);
-+ return err;
-+ }
-+ pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+ /* Set default return value = transfer length */
-+ res = count;
-+
-+ /*
-+ * At this point, the virtual area buf[0] .. buf[count-1] will have
-+ * corresponding pages mapped in the physical memory and locked until
-+ * we unmap the kiobuf. The pages cannot be swapped out or moved
-+ * around.
-+ */
-+ ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+ pagelen = PAGE_SIZE - ofs;
-+ if (count < pagelen)
-+ pagelen = count;
-+
-+ for (i = 0; i < pgcount; i++) {
-+ flush_dcache_page(maplist[i]);
-+
-+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+ list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+ ofs = 0; /* all subsequent transfers start at beginning of a page */
-+ count = count - pagelen;
-+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+ }
-+ list->nr_transfers = pgcount;
-+
-+ /* Perform transfer on SPI bus */
-+ spi_access_bus(spi_device);
-+ spi_transfer(list);
-+ spi_release_bus(spi_device);
-+
-+ while (pgcount--) {
-+ page_cache_release (maplist[pgcount]);
-+ }
-+ flush_cache_all();
-+
-+ kfree(maplist);
-+ kfree(list);
-+
-+ return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ // TODO: This interface can be used to configure the SPI bus.
-+ // Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+ switch(cmd) {
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+ unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+ if (spi_device >= NR_SPI_DEVICES)
-+ return -ENODEV;
-+
-+ /*
-+ * 'private_data' is actually a pointer, but we overload it with the
-+ * value we want to store.
-+ */
-+ file->private_data = (void *)spi_device;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .read = spidev_rd_wr,
-+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+ .ioctl = spidev_ioctl,
-+ .open = spidev_open,
-+ .release = spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+#endif
-+
-+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_DEVFS_FS
-+ devfs_mk_dir("spi");
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+ }
-+#endif
-+ printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+ int i;
-+ for (i = 0; i < NR_SPI_DEVICES; i++) {
-+ devfs_remove("spi/%d", i);
-+ }
-+
-+ devfs_remove("spi");
-+#endif
-+
-+ if (unregister_chrdev(SPI_MAJOR, "spi")) {
-+ printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
-+ return;
-+ }
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN linux-2.6.22.1-0rig/drivers/char/Kconfig linux-2.6.22.1/drivers/char/Kconfig
---- linux-2.6.22.1-0rig/drivers/char/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/char/Kconfig 2007-07-17 23:35:23.000000000 +0200
-@@ -1083,5 +1083,21 @@
-
- source "drivers/s390/char/Kconfig"
-
-+config AT91_SPI
-+ bool "SPI driver (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200
-+ default y
-+ help
-+ The SPI driver gives access to this serial bus on the AT91RM9200
-+ processor.
-+
-+config AT91_SPIDEV
-+ bool "SPI device interface (legacy) for AT91RM9200 processors"
-+ depends on ARCH_AT91RM9200 && AT91_SPI
-+ default n
-+ help
-+ The SPI driver gives user mode access to this serial
-+ bus on the AT91RM9200 processor.
-+
- endmenu
-
-diff -urN linux-2.6.22.1-0rig/drivers/char/Makefile linux-2.6.22.1/drivers/char/Makefile
---- linux-2.6.22.1-0rig/drivers/char/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/char/Makefile 2007-07-17 23:35:23.000000000 +0200
-@@ -93,6 +93,8 @@
- obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
- obj-$(CONFIG_GPIO_TB0219) += tb0219.o
- obj-$(CONFIG_TELCLOCK) += tlclk.o
-+obj-$(CONFIG_AT91_SPI) += at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
-
- obj-$(CONFIG_WATCHDOG) += watchdog/
- obj-$(CONFIG_MWAVE) += mwave/
-diff -urN linux-2.6.22.1-0rig/drivers/i2c/busses/i2c-at91.c linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.22.1-0rig/drivers/i2c/busses/i2c-at91.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/i2c/busses/i2c-at91.c 2007-07-17 23:35:24.000000000 +0200
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
-
--#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
-
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
-
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
- at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
-
- /* Calcuate clock dividers */
-- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- cdiv = cdiv + 1; /* round up */
- ckdiv = 0;
- while (cdiv > 255) {
-@@ -61,11 +64,12 @@
- cdiv = cdiv >> 1;
- }
-
-- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
-- if (ckdiv > 5) {
-- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
-- ckdiv = 5;
-- }
-+ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 5;
-+ } else if (ckdiv > 7) {
-+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+ ckdiv = 7;
- }
-
- at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN linux-2.6.22.1-0rig/drivers/i2c/busses/i2c-pca.c linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.22.1-0rig/drivers/i2c/busses/i2c-pca.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/i2c/busses/i2c-pca.c 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,213 @@
-+/*
-+ * Platform driver for PCA9564 I2C bus controller.
-+ *
-+ * (C) 2006 Andrew Victor
-+ *
-+ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
-+ * Copyright (C) 2004 Arcom Control Systems
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-pca.h>
-+
-+#include <asm/io.h>
-+
-+#include "../algos/i2c-algo-pca.h"
-+
-+#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
-+#define PCA_CLOCK I2C_PCA_CON_59kHz
-+
-+//#define REG_SHIFT 2
-+#define REG_SHIFT 0
-+
-+//#define DEBUG_IO
-+
-+#define PCA_IO_SIZE 4
-+
-+static void __iomem *base_addr;
-+static int irq;
-+static wait_queue_head_t pca_wait;
-+
-+static int pca_getown(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_OWN_ADDRESS;
-+}
-+
-+static int pca_getclock(struct i2c_algo_pca_data *adap)
-+{
-+ return PCA_CLOCK;
-+}
-+
-+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
-+{
-+#ifdef DEBUG_IO
-+ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-+ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
-+#endif
-+ udelay(1);
-+ outb(val, base_addr + (reg << REG_SHIFT));
-+}
-+
-+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
-+{
-+ int res;
-+
-+ udelay(1);
-+ res = inb(base_addr + (reg << REG_SHIFT));
-+#ifdef DEBUG_IO
-+ {
-+ static char *names[] = { "STA", "DAT", "ADR", "CON" };
-+ printk("*** read %s => %#04x\n", names[reg], res);
-+ }
-+#endif
-+ return res;
-+}
-+
-+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
-+{
-+ int ret = 0;
-+
-+ if (irq > -1) {
-+ ret = wait_event_interruptible(pca_wait,
-+ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
-+ } else {
-+ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
-+ udelay(100);
-+ }
-+ return ret;
-+}
-+
-+static irqreturn_t pca_handler(int this_irq, void *dev_id)
-+{
-+ wake_up_interruptible(&pca_wait);
-+ return IRQ_HANDLED;
-+}
-+
-+static struct i2c_algo_pca_data pca_i2c_data = {
-+ .get_own = pca_getown,
-+ .get_clock = pca_getclock,
-+ .write_byte = pca_writebyte,
-+ .read_byte = pca_readbyte,
-+ .wait_for_interrupt = pca_waitforinterrupt,
-+};
-+
-+static struct i2c_adapter pca_i2c_ops = {
-+ .owner = THIS_MODULE,
-+ .id = I2C_HW_A_PLAT,
-+ .algo_data = &pca_i2c_data,
-+ .name = "PCA9564",
-+ .class = I2C_CLASS_HWMON,
-+};
-+
-+static int __devinit pca_i2c_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ init_waitqueue_head(&pca_wait);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+
-+ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
-+ return -ENXIO;
-+
-+ base_addr = ioremap(res->start, PCA_IO_SIZE);
-+ if (base_addr == NULL)
-+ goto out_region;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq > -1) {
-+ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
-+ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
-+ goto out_remap;
-+ }
-+ }
-+
-+ /* set up the driverfs linkage to our parent device */
-+ pca_i2c_ops.dev.parent = &pdev->dev;
-+
-+ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
-+ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
-+ goto out_irq;
-+ }
-+
-+ return 0;
-+
-+ out_irq:
-+ if (irq > -1)
-+ free_irq(irq, &pca_i2c_ops);
-+
-+ out_remap:
-+ iounmap(base_addr);
-+
-+ out_region:
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+ return -ENODEV;
-+}
-+
-+static int __devexit pca_i2c_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+
-+ i2c_del_adapter(&pca_i2c_ops);
-+
-+ if (irq > 0)
-+ free_irq(irq, NULL);
-+
-+ iounmap(base_addr);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(res->start, PCA_IO_SIZE);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver pca_i2c_driver = {
-+ .probe = pca_i2c_probe,
-+ .remove = __devexit_p(pca_i2c_remove),
-+ .driver = {
-+ .name = "pca9564",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init pca_i2c_init(void)
-+{
-+ return platform_driver_register(&pca_i2c_driver);
-+}
-+
-+static void __exit pca_i2c_exit(void)
-+{
-+ platform_driver_unregister(&pca_i2c_driver);
-+}
-+
-+module_init(pca_i2c_init);
-+module_exit(pca_i2c_exit);
-+
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("PCA9564 platform driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22.1-0rig/drivers/i2c/busses/Kconfig linux-2.6.22.1/drivers/i2c/busses/Kconfig
---- linux-2.6.22.1-0rig/drivers/i2c/busses/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/i2c/busses/Kconfig 2007-07-17 23:35:23.000000000 +0200
-@@ -80,6 +80,14 @@
- This supports the use of the I2C interface on Atmel AT91
- processors.
-
-+config I2C_AT91_CLOCKRATE
-+ prompt "Atmel AT91 I2C/TWI clock-rate"
-+ depends on I2C_AT91
-+ int
-+ default 100000
-+ help
-+ Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
-@@ -598,6 +606,14 @@
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
-
-+config I2C_PCA
-+ tristate "PCA9564"
-+ depends on I2C
-+ select I2C_ALGOPCA
-+ help
-+ This driver support the Philips PCA 9564 Parallel bus to I2C
-+ bus controller.
-+
- config I2C_PCA_ISA
- tristate "PCA9564 on an ISA bus"
- depends on ISA
-diff -urN linux-2.6.22.1-0rig/drivers/i2c/busses/Makefile linux-2.6.22.1/drivers/i2c/busses/Makefile
---- linux-2.6.22.1-0rig/drivers/i2c/busses/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/i2c/busses/Makefile 2007-07-17 23:35:24.000000000 +0200
-@@ -30,6 +30,7 @@
- obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
- obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
- obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
-+obj-$(CONFIG_I2C_PCA) += i2c-pca.o
- obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
- obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
- obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
-diff -urN linux-2.6.22.1-0rig/drivers/leds/Kconfig linux-2.6.22.1/drivers/leds/Kconfig
---- linux-2.6.22.1-0rig/drivers/leds/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/leds/Kconfig 2007-07-17 23:35:24.000000000 +0200
-@@ -77,6 +77,13 @@
- This option enables support for the Soekris net4801 and net4826 error
- LED.
-
-+config LEDS_AT91
-+ tristate "LED support using AT91 GPIOs"
-+ depends on LEDS_CLASS && ARCH_AT91 && !LEDS
-+ help
-+ This option enables support for LEDs connected to GPIO lines
-+ on AT91-based boards.
-+
- config LEDS_WRAP
- tristate "LED Support for the WRAP series LEDs"
- depends on LEDS_CLASS && SCx200_GPIO
-diff -urN linux-2.6.22.1-0rig/drivers/leds/leds-at91.c linux-2.6.22.1/drivers/leds/leds-at91.c
---- linux-2.6.22.1-0rig/drivers/leds/leds-at91.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/leds/leds-at91.c 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,140 @@
-+/*
-+ * AT91 GPIO based LED driver
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+static LIST_HEAD(at91_led_list); /* list of AT91 LEDs */
-+
-+struct at91_led {
-+ struct led_classdev cdev;
-+ struct list_head list;
-+ struct at91_gpio_led *led_data;
-+};
-+
-+/*
-+ * Change the state of the LED.
-+ */
-+static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
-+{
-+ struct at91_led *led = container_of(cdev, struct at91_led, cdev);
-+ short active = (value == LED_OFF);
-+
-+ if (led->led_data->flags & 1) /* active high/low? */
-+ active = !active;
-+ at91_set_gpio_value(led->led_data->gpio, active);
-+}
-+
-+static int __devexit at91_led_remove(struct platform_device *pdev)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_unregister(&led->cdev);
-+
-+#warning "Free allocated memory"
-+ // TODO: Free memory. kfree(led);
-+
-+ return 0;
-+}
-+
-+static int __init at91_led_probe(struct platform_device *pdev)
-+{
-+ int status = 0;
-+ struct at91_gpio_led *pdata = pdev->dev.platform_data;
-+ unsigned nr_leds;
-+ struct at91_led *led;
-+
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ nr_leds = pdata->index; /* first index stores number of LEDs */
-+
-+ while (nr_leds--) {
-+ led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
-+ if (!led) {
-+ dev_err(&pdev->dev, "No memory for device\n");
-+ status = -ENOMEM;
-+ goto cleanup;
-+ }
-+ led->led_data = pdata;
-+ led->cdev.name = pdata->name;
-+ led->cdev.brightness_set = at91_led_set,
-+ led->cdev.default_trigger = pdata->trigger;
-+
-+ status = led_classdev_register(&pdev->dev, &led->cdev);
-+ if (status < 0) {
-+ dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
-+cleanup:
-+ at91_led_remove(pdev);
-+ break;
-+ }
-+ list_add(&led->list, &at91_led_list);
-+ pdata++;
-+ }
-+ return status;
-+}
-+
-+#ifdef CONFIG_PM
-+static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_suspend(&led->cdev);
-+
-+ return 0;
-+}
-+
-+static int at91_led_resume(struct platform_device *dev)
-+{
-+ struct at91_led *led;
-+
-+ list_for_each_entry (led, &at91_led_list, list)
-+ led_classdev_resume(&led->cdev);
-+
-+ return 0;
-+}
-+#else
-+#define at91_led_suspend NULL
-+#define at91_led_resume NULL
-+#endif
-+
-+static struct platform_driver at91_led_driver = {
-+ .probe = at91_led_probe,
-+ .remove = __devexit_p(at91_led_remove),
-+ .suspend = at91_led_suspend,
-+ .resume = at91_led_resume,
-+ .driver = {
-+ .name = "at91_leds",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_led_init(void)
-+{
-+ return platform_driver_register(&at91_led_driver);
-+}
-+module_init(at91_led_init);
-+
-+static void __exit at91_led_exit(void)
-+{
-+ platform_driver_unregister(&at91_led_driver);
-+}
-+module_exit(at91_led_exit);
-+
-+MODULE_DESCRIPTION("AT91 GPIO LED driver");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22.1-0rig/drivers/leds/Makefile linux-2.6.22.1/drivers/leds/Makefile
---- linux-2.6.22.1-0rig/drivers/leds/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/leds/Makefile 2007-07-17 23:35:24.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
- obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_AT91) += leds-at91.o
-
- # LED Triggers
-diff -urN linux-2.6.22.1-0rig/drivers/mmc/host/at91_mci.c linux-2.6.22.1/drivers/mmc/host/at91_mci.c
---- linux-2.6.22.1-0rig/drivers/mmc/host/at91_mci.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/mmc/host/at91_mci.c 2007-07-17 23:48:54.000000000 +0200
-@@ -85,7 +85,7 @@
-
- #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
- | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
-- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-+ | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-
- #define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
- #define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-@@ -560,9 +560,7 @@
- pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
- status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
-- if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
-- AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
-- AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
-+ if (status & (AT91_MCI_ERRORS) {
- if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
- cmd->error = MMC_ERR_NONE;
- }
-@@ -663,15 +661,15 @@
-
- int_status = at91_mci_read(host, AT91_MCI_SR);
- int_mask = at91_mci_read(host, AT91_MCI_IMR);
--
-+
- pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
- int_status & int_mask);
--
-+
- int_status = int_status & int_mask;
-
- if (int_status & AT91_MCI_ERRORS) {
- completed = 1;
--
-+
- if (int_status & AT91_MCI_UNRE)
- pr_debug("MMC: Underrun error\n");
- if (int_status & AT91_MCI_OVRE)
-@@ -819,7 +817,7 @@
- mmc->f_min = 375000;
- mmc->f_max = 25000000;
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-- mmc->caps = MMC_CAP_BYTEBLOCK;
-+ mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
-
- mmc->max_blk_size = 4095;
- mmc->max_blk_count = mmc->max_req_size;
-@@ -893,6 +891,8 @@
-
- mmc_add_host(mmc);
-
-+ device_init_wakeup(&pdev->dev, 1);
-+
- /*
- * monitor card insertion/removal if we can
- */
-@@ -922,6 +922,8 @@
-
- host = mmc_priv(mmc);
-
-+ device_init_wakeup(&pdev->dev, 0);
-+
- if (host->present != -1) {
- free_irq(host->board->det_pin, host);
- cancel_delayed_work(&host->mmc->detect);
-@@ -949,8 +951,12 @@
- static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
- {
- struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct at91mci_host *host = mmc_priv(mmc);
- int ret = 0;
-
-+ if (device_may_wakeup(&pdev->dev))
-+ enable_irq_wake(host->board->det_pin);
-+
- if (mmc)
- ret = mmc_suspend_host(mmc, state);
-
-@@ -960,8 +966,12 @@
- static int at91_mci_resume(struct platform_device *pdev)
- {
- struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct at91mci_host *host = mmc_priv(mmc);
- int ret = 0;
-
-+ if (device_may_wakeup(&pdev->dev))
-+ disable_irq_wake(host->board->det_pin);
-+
- if (mmc)
- ret = mmc_resume_host(mmc);
-
-diff -urN linux-2.6.22.1-0rig/drivers/mtd/devices/at91_dataflash.c linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.22.1-0rig/drivers/mtd/devices/at91_dataflash.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/mtd/devices/at91_dataflash.c 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,667 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ * Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
-+#undef DATAFLASH_ALWAYS_ADD_DEVICE /* always add whole device when using partitions? */
-+
-+#define OP_READ_CONTINUOUS 0xE8
-+#define OP_READ_PAGE 0xD2
-+#define OP_READ_BUFFER1 0xD4
-+#define OP_READ_BUFFER2 0xD6
-+#define OP_READ_STATUS 0xD7
-+
-+#define OP_ERASE_PAGE 0x81
-+#define OP_ERASE_BLOCK 0x50
-+
-+#define OP_TRANSFER_BUF1 0x53
-+#define OP_TRANSFER_BUF2 0x55
-+#define OP_COMPARE_BUF1 0x60
-+#define OP_COMPARE_BUF2 0x61
-+
-+#define OP_PROGRAM_VIA_BUF1 0x82
-+#define OP_PROGRAM_VIA_BUF2 0x85
-+
-+struct dataflash_local
-+{
-+ int spi; /* SPI chip-select number */
-+
-+ unsigned int page_size; /* number of bytes per page */
-+ unsigned short page_offset; /* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 6 * 32 * 8 * 528, /* 6 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
-+ }
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 4 * 64 * 8 * 528, /* 4 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
-+ }
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ name: "romboot",
-+ offset: 0,
-+ size: 16 * 1056, /* 160 Kb */
-+ mask_flags: MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ name: "uboot",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 128 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "kernel",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: 1024 * 1056, /* 1 MB */
-+ },
-+ {
-+ name: "filesystem",
-+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+ size: MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#elif defined(CONFIG_MACH_MULTMDP)
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "configuration",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 20 * 1056,
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 1520 * 1056,
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL,
-+ }
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+ {
-+ .name = "bootloader",
-+ .offset = 0,
-+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+ .mask_flags = MTD_WRITEABLE, /* read-only */
-+ },
-+ {
-+ .name = "kernel",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
-+ },
-+ {
-+ .name = "filesystem",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
-+ }
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
-+ SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+ If this is not valid, then either (i) each dataflash 'priv' structure
-+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+ another mechanism. */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+ struct spi_transfer_list* list = spi_transfer_desc;
-+
-+ list->tx[0] = tx; list->txlen[0] = tx_len;
-+ list->rx[0] = rx; list->rxlen[0] = rx_len;
-+
-+ list->tx[1] = txnext; list->txlen[1] = txnext_len;
-+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
-+
-+ list->nr_transfers = nr;
-+
-+ return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return;
-+
-+ do {
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ } while ((command[1] & 0x80) == 0);
-+
-+ kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+ unsigned short status;
-+ char* command = kmalloc(2, GFP_KERNEL);
-+
-+ if (!command)
-+ return 0;
-+
-+ command[0] = OP_READ_STATUS;
-+ command[1] = 0;
-+
-+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+ status = command[1];
-+
-+ kfree(command);
-+ return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+ /* Sanity checks */
-+ if (instr->addr + instr->len > mtd->size)
-+ return -EINVAL;
-+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+ return -EINVAL;
-+ if ((instr->addr % priv->page_size) != 0)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ while (instr->len > 0) {
-+ /* Calculate flash page address */
-+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+ command[0] = OP_ERASE_PAGE;
-+ command[1] = (pageaddr & 0x00FF0000) >> 16;
-+ command[2] = (pageaddr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+ at91_dataflash_waitready(); /* poll status until ready */
-+ spi_release_bus(priv->spi);
-+
-+ instr->addr += priv->page_size; /* next page */
-+ instr->len -= priv->page_size;
-+ }
-+
-+ kfree(command);
-+
-+ /* Inform MTD subsystem that erase is complete */
-+ instr->state = MTD_ERASE_DONE;
-+ if (instr->callback)
-+ instr->callback(instr);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ * from : Start offset in flash device
-+ * len : Amount to read
-+ * retlen : About of data actually read
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int addr;
-+ char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (from + len > mtd->size)
-+ return -EINVAL;
-+
-+ /* Calculate flash page/byte address */
-+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+ command = kmalloc(8, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ command[0] = OP_READ_CONTINUOUS;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+ /* Send command to SPI device */
-+ spi_access_bus(priv->spi);
-+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+ spi_release_bus(priv->spi);
-+
-+ *retlen = len;
-+ kfree(command);
-+ return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ * to : Start offset in flash device
-+ * len : Amount to write
-+ * retlen : Amount of data actually written
-+ * buf : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+ unsigned int pageaddr, addr, offset, writelen;
-+ size_t remaining;
-+ u_char *writebuf;
-+ unsigned short status;
-+ int res = 0;
-+ char* command;
-+ char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+ printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+ *retlen = 0;
-+
-+ /* Sanity checks */
-+ if (!len)
-+ return 0;
-+ if (to + len > mtd->size)
-+ return -EINVAL;
-+
-+ command = kmalloc(4, GFP_KERNEL);
-+ if (!command)
-+ return -ENOMEM;
-+
-+ pageaddr = ((unsigned)to / priv->page_size);
-+ offset = ((unsigned)to % priv->page_size);
-+ if (offset + len > priv->page_size)
-+ writelen = priv->page_size - offset;
-+ else
-+ writelen = len;
-+ writebuf = (u_char *)buf;
-+ remaining = len;
-+
-+ /* Allocate temporary buffer */
-+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+ if (!tmpbuf) {
-+ kfree(command);
-+ return -ENOMEM;
-+ }
-+
-+ /* Gain access to the SPI bus */
-+ spi_access_bus(priv->spi);
-+
-+ while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+ /* (1) Transfer to Buffer1 */
-+ if (writelen != priv->page_size) {
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_TRANSFER_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+ }
-+
-+ /* (2) Program via Buffer1 */
-+ addr = (pageaddr << priv->page_offset) + offset;
-+ command[0] = OP_PROGRAM_VIA_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+ at91_dataflash_waitready();
-+
-+ /* (3) Compare to Buffer1 */
-+ addr = pageaddr << priv->page_offset;
-+ command[0] = OP_COMPARE_BUF1;
-+ command[1] = (addr & 0x00FF0000) >> 16;
-+ command[2] = (addr & 0x0000FF00) >> 8;
-+ command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+ at91_dataflash_waitready();
-+
-+ /* Get result of the compare operation */
-+ status = at91_dataflash_status();
-+ if ((status & 0x40) == 1) {
-+ printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+ remaining = 0;
-+ res = -EIO;
-+ }
-+
-+ remaining = remaining - writelen;
-+ pageaddr++;
-+ offset = 0;
-+ writebuf += writelen;
-+ *retlen += writelen;
-+
-+ if (remaining > priv->page_size)
-+ writelen = priv->page_size;
-+ else
-+ writelen = remaining;
-+ }
-+
-+ /* Release SPI bus */
-+ spi_release_bus(priv->spi);
-+
-+ kfree(tmpbuf);
-+ kfree(command);
-+ return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+ int nr_pages, int pagesize, int pageoffset)
-+{
-+ struct mtd_info *device;
-+ struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+ struct mtd_partition *mtd_parts = 0;
-+ int mtd_parts_nr = 0;
-+#endif
-+
-+ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+ return 0;
-+ }
-+
-+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+ if (!device)
-+ return -ENOMEM;
-+ memset(device, 0, sizeof(struct mtd_info));
-+
-+ device->name = (char *)&device[1];
-+ sprintf(device->name, "%s.spi%d", name, channel);
-+ device->size = nr_pages * pagesize;
-+ device->erasesize = pagesize;
-+ device->writesize = pagesize;
-+ device->owner = THIS_MODULE;
-+ device->type = MTD_DATAFLASH;
-+ device->flags = MTD_WRITEABLE;
-+ device->erase = at91_dataflash_erase;
-+ device->read = at91_dataflash_read;
-+ device->write = at91_dataflash_write;
-+
-+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+ if (!priv) {
-+ kfree(device);
-+ return -ENOMEM;
-+ }
-+ memset(priv, 0, sizeof(struct dataflash_local));
-+
-+ priv->spi = channel;
-+ priv->page_size = pagesize;
-+ priv->page_offset = pageoffset;
-+ device->priv = priv;
-+
-+ mtd_devices[nr_devices] = device;
-+ nr_devices++;
-+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+ if (mtd_parts_nr <= 0) {
-+ switch (IDsize) {
-+ case SZ_2M:
-+ mtd_parts = static_partitions_2M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+ break;
-+ case SZ_4M:
-+ mtd_parts = static_partitions_4M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+ break;
-+ case SZ_8M:
-+ mtd_parts = static_partitions_8M;
-+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+ break;
-+ }
-+ }
-+
-+ if (mtd_parts_nr > 0) {
-+#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
-+ add_mtd_device(device);
-+#endif
-+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+ }
-+#endif
-+ return add_mtd_device(device); /* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ * Device Density ID code Nr Pages Page Size Page offset
-+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
-+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
-+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
-+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
-+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
-+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
-+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
-+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+ int res = 0;
-+ unsigned short status;
-+
-+ spi_access_bus(channel);
-+ status = at91_dataflash_status();
-+ spi_release_bus(channel);
-+ if (status != 0xff) { /* no dataflash device there */
-+ switch (status & 0x3c) {
-+ case 0x0c: /* 0 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+ break;
-+ case 0x14: /* 0 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+ break;
-+ case 0x1c: /* 0 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+ break;
-+ case 0x24: /* 1 0 0 1 */
-+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+ break;
-+ case 0x2c: /* 1 0 1 1 */
-+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+ break;
-+ case 0x34: /* 1 1 0 1 */
-+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+ break;
-+ case 0x3c: /* 1 1 1 1 */
-+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+ break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+// case 0x10: /* 0 1 0 0 */
-+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+// break;
-+ default:
-+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+ }
-+ }
-+
-+ return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+ if (!spi_transfer_desc)
-+ return -ENOMEM;
-+
-+ /* DataFlash (SPI chip select 0) */
-+ at91_dataflash_detect(0);
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+ /* DataFlash card (SPI chip select 3) */
-+ at91_dataflash_detect(3);
-+#endif
-+
-+ return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+ if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+ del_mtd_partitions(mtd_devices[i]);
-+#else
-+ del_mtd_device(mtd_devices[i]);
-+#endif
-+ kfree(mtd_devices[i]->priv);
-+ kfree(mtd_devices[i]);
-+ }
-+ }
-+ nr_devices = 0;
-+ kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN linux-2.6.22.1-0rig/drivers/mtd/devices/Kconfig linux-2.6.22.1/drivers/mtd/devices/Kconfig
---- linux-2.6.22.1-0rig/drivers/mtd/devices/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/devices/Kconfig 2007-07-17 23:35:24.000000000 +0200
-@@ -269,5 +269,11 @@
- LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- you have managed to wipe the first block.
-
--endmenu
-+config MTD_AT91_DATAFLASH
-+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+ help
-+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+ If you have such a board, say 'Y'.
-
-+endmenu
-diff -urN linux-2.6.22.1-0rig/drivers/mtd/devices/Makefile linux-2.6.22.1/drivers/mtd/devices/Makefile
---- linux-2.6.22.1-0rig/drivers/mtd/devices/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/mtd/devices/Makefile 2007-07-17 23:35:24.000000000 +0200
-@@ -18,3 +18,4 @@
- obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
- obj-$(CONFIG_MTD_DATAFLASH26) += at91_dataflash26.o
- obj-$(CONFIG_MTD_M25P80) += m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN linux-2.6.22.1-0rig/drivers/net/arm/at91_ether.c linux-2.6.22.1/drivers/net/arm/at91_ether.c
---- linux-2.6.22.1-0rig/drivers/net/arm/at91_ether.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/net/arm/at91_ether.c 2007-07-17 23:35:24.000000000 +0200
-@@ -894,6 +894,7 @@
- skb_reserve(skb, 2);
- memcpy(skb_put(skb, pktlen), p_recv, pktlen);
-
-+ skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- dev->last_rx = jiffies;
- lp->stats.rx_bytes += pktlen;
-@@ -978,14 +979,22 @@
- struct net_device *dev;
- struct at91_private *lp;
- unsigned int val;
-- int res;
-+ struct resource *res;
-+ int ret;
-
- dev = alloc_etherdev(sizeof(struct at91_private));
- if (!dev)
- return -ENOMEM;
-
-- dev->base_addr = AT91_VA_BASE_EMAC;
-- dev->irq = AT91RM9200_ID_EMAC;
-+ /* Get I/O base address and IRQ */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ free_netdev(dev);
-+ return -ENODEV;
-+ }
-+ dev->base_addr = res->start;
-+ dev->irq = platform_get_irq(pdev, 0);
-+
- SET_MODULE_OWNER(dev);
-
- /* Install the interrupt handler */
-@@ -1058,12 +1067,12 @@
- lp->phy_address = phy_address; /* MDI address of PHY */
-
- /* Register the network interface */
-- res = register_netdev(dev);
-- if (res) {
-+ ret = register_netdev(dev);
-+ if (ret) {
- free_irq(dev->irq, dev);
- free_netdev(dev);
- dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
-- return res;
-+ return ret;
- }
-
- /* Determine current link speed */
-diff -urN linux-2.6.22.1-0rig/drivers/serial/atmel_serial.c linux-2.6.22.1/drivers/serial/atmel_serial.c
---- linux-2.6.22.1-0rig/drivers/serial/atmel_serial.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/serial/atmel_serial.c 2007-07-17 23:35:24.000000000 +0200
-@@ -7,6 +7,8 @@
- * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
-+ * DMA support added by Chip Coldwell.
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -33,6 +35,7 @@
- #include <linux/sysrq.h>
- #include <linux/tty_flip.h>
- #include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
- #include <linux/atmel_pdc.h>
-
- #include <asm/io.h>
-@@ -47,6 +50,11 @@
-
- #include "atmel_serial.h"
-
-+#define SUPPORT_PDC
-+#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
-+#warning "Revisit"
-+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
-+
- #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
- #define SUPPORT_SYSRQ
- #endif
-@@ -107,6 +115,13 @@
- static int (*atmel_open_hook)(struct uart_port *);
- static void (*atmel_close_hook)(struct uart_port *);
-
-+struct atmel_dma_buffer {
-+ unsigned char *buf;
-+ dma_addr_t dma_addr;
-+ size_t dma_size;
-+ unsigned int ofs;
-+};
-+
- /*
- * We wrap our port structure around the generic uart_port.
- */
-@@ -114,10 +129,20 @@
- struct uart_port uart; /* uart */
- struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
- int break_active; /* break being received */
-+
-+ short use_dma_rx; /* enable PDC receiver */
-+ short pdc_rx_idx; /* current PDC RX buffer */
-+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
-+
-+ short use_dma_tx; /* enable PDC transmitter */
-+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
- };
-
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-
-+#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
-+#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
-+
- #ifdef SUPPORT_SYSRQ
- static struct console atmel_console;
-@@ -205,7 +230,12 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IDR(port, ATMEL_US_TXRDY);
-+ if (atmel_port->use_dma_tx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -215,7 +245,17 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IER(port, ATMEL_US_TXRDY);
-+ if (atmel_port->use_dma_tx) {
-+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
-+ /* The transmitter is already running. Yes, we
-+ really need this.*/
-+ return;
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_TXRDY);
- }
-
- /*
-@@ -225,7 +265,12 @@
- {
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- UART_PUT_IDR(port, ATMEL_US_RXRDY);
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
-+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ }
-+ else
-+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
- }
-
- /*
-@@ -248,6 +293,134 @@
- }
-
- /*
-+ * Receive data via the PDC. A buffer has been fulled.
-+ */
-+static void atmel_pdc_endrx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ unsigned int count;
-+
-+ count = pdc->dma_size - pdc->ofs;
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ port->icount.rx += count;
-+ }
-+
-+ /* Set this buffer as the next receive buffer */
-+ pdc->ofs = 0;
-+ UART_PUT_RNPR(port, pdc->dma_addr);
-+ UART_PUT_RNCR(port, pdc->dma_size);
-+
-+ /* Switch to next buffer */
-+ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
-+}
-+
-+/*
-+ * Receive data via the PDC. At least one byte was received, but the
-+ * buffer was not full when the inter-character timeout expired.
-+ */
-+static void atmel_pdc_timeout(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct tty_struct *tty = port->info->tty;
-+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+ /* unsigned */ int ofs, count;
-+
-+ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
-+ count = ofs - pdc->ofs;
-+
-+ if (likely(count > 0)) {
-+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+ tty_flip_buffer_push(tty);
-+
-+ pdc->ofs = ofs;
-+ port->icount.rx += count;
-+ }
-+
-+ /* reset the UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+}
-+
-+/*
-+ * Deal with parity, framing and overrun errors.
-+ */
-+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
-+{
-+ /* clear error */
-+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+
-+ if (status & ATMEL_US_RXBRK) {
-+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
-+ port->icount.brk++;
-+ }
-+ if (status & ATMEL_US_PARE)
-+ port->icount.parity++;
-+ if (status & ATMEL_US_FRAME)
-+ port->icount.frame++;
-+ if (status & ATMEL_US_OVRE)
-+ port->icount.overrun++;
-+}
-+
-+/*
-+ * A transmission via the PDC is complete.
-+ */
-+static void atmel_pdc_endtx(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ xmit->tail += pdc->ofs;
-+ if (xmit->tail >= SERIAL_XMIT_SIZE)
-+ xmit->tail -= SERIAL_XMIT_SIZE;
-+
-+ port->icount.tx += pdc->ofs;
-+ pdc->ofs = 0;
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+}
-+
-+/*
-+ * The PDC transmitter is idle, so either start the next transfer or
-+ * disable the transmitter.
-+ */
-+static void atmel_pdc_txbufe(struct uart_port *port)
-+{
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+ struct circ_buf *xmit = &port->info->xmit;
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ int count;
-+
-+ if (!uart_circ_empty(xmit)) {
-+ /* more to transmit - setup next transfer */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+
-+ if (xmit->tail < xmit->head)
-+ count = xmit->head - xmit->tail;
-+ else
-+ count = SERIAL_XMIT_SIZE - xmit->tail;
-+ pdc->ofs = count;
-+
-+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
-+ UART_PUT_TCR(port, count);
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
-+ }
-+ else {
-+ /* nothing left to transmit - disable the transmitter */
-+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
-+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+ }
-+}
-+
-+/*
- * Characters received (called from interrupt handler)
- */
- static void atmel_rx_chars(struct uart_port *port)
-@@ -349,6 +522,14 @@
- status = UART_GET_CSR(port);
- pending = status & UART_GET_IMR(port);
- while (pending) {
-+ /* PDC receive */
-+ if (pending & ATMEL_US_ENDRX)
-+ atmel_pdc_endrx(port);
-+ if (pending & ATMEL_US_TIMEOUT)
-+ atmel_pdc_timeout(port);
-+ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
-+ atmel_pdc_rxerr(port, pending);
-+
- /* Interrupt receive */
- if (pending & ATMEL_US_RXRDY)
- atmel_rx_chars(port);
-@@ -363,6 +544,12 @@
- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
- wake_up_interruptible(&port->info->delta_msr_wait);
-
-+ /* PDC transmit */
-+ if (pending & ATMEL_US_ENDTX)
-+ atmel_pdc_endtx(port);
-+ if (pending & ATMEL_US_TXBUFE)
-+ atmel_pdc_txbufe(port);
-+
- /* Interrupt transmit */
- if (pending & ATMEL_US_TXRDY)
- atmel_tx_chars(port);
-@@ -401,6 +588,47 @@
- }
-
- /*
-+ * Initialize DMA (if necessary)
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
-+ if (pdc->buf == NULL) {
-+ if (i != 0) {
-+ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ kfree(atmel_port->pdc_rx[0].buf);
-+ }
-+ free_irq(port->irq, port);
-+ return -ENOMEM;
-+ }
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+ pdc->dma_size = PDC_BUFFER_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ atmel_port->pdc_rx_idx = 0;
-+
-+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
-+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
-+
-+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
-+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+ struct circ_buf *xmit = &port->info->xmit;
-+
-+ pdc->buf = xmit->buf;
-+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
-+ pdc->dma_size = SERIAL_XMIT_SIZE;
-+ pdc->ofs = 0;
-+ }
-+
-+ /*
- * If there is a specific "open" function (to register
- * control line interrupts)
- */
-@@ -418,7 +646,15 @@
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
-
-- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-+ if (atmel_port->use_dma_rx) {
-+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
-+ UART_PUT_CR(port, ATMEL_US_STTTO);
-+
-+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
-+ }
-+ else
-+ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
-
- return 0;
- }
-@@ -431,6 +667,31 @@
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
- /*
-+ * Ensure everything is stopped.
-+ */
-+ atmel_stop_rx(port);
-+ atmel_stop_tx(port);
-+
-+ /*
-+ * Shut-down the DMA.
-+ */
-+ if (atmel_port->use_dma_rx) {
-+ int i;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+ kfree(pdc->buf);
-+ }
-+ }
-+ if (atmel_port->use_dma_tx) {
-+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+ }
-+
-+ /*
- * Disable all interrupts, port and break condition.
- */
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
-@@ -481,6 +742,7 @@
- */
- static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
- {
-+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
-@@ -490,7 +752,7 @@
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
-- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
-+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
- quot /= 8;
- mode |= ATMEL_US_USCLKS_MCK_DIV8;
- }
-@@ -539,6 +801,9 @@
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= ATMEL_US_RXBRK;
-
-+ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
-+ UART_PUT_IER(port, port->read_status_mask);
-+
- /*
- * Characters to ignore
- */
-@@ -717,6 +982,13 @@
- clk_enable(atmel_port->clk);
- port->uartclk = clk_get_rate(atmel_port->clk);
- }
-+
-+#ifdef SUPPORT_PDC
-+ atmel_port->use_dma_rx = data->use_dma_rx;
-+ atmel_port->use_dma_tx = data->use_dma_tx;
-+ if (atmel_port->use_dma_tx)
-+ port->fifosize = PDC_BUFFER_SIZE;
-+#endif
- }
-
- /*
-@@ -893,7 +1165,8 @@
- struct uart_port *port = platform_get_drvdata(pdev);
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-
-- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
-+ if (device_may_wakeup(&pdev->dev)
-+ && !clk_must_disable(atmel_port->clk))
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
-diff -urN linux-2.6.22.1-0rig/drivers/spi/Kconfig linux-2.6.22.1/drivers/spi/Kconfig
---- linux-2.6.22.1-0rig/drivers/spi/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/spi/Kconfig 2007-07-17 23:35:24.000000000 +0200
-@@ -55,6 +55,7 @@
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32) && SPI_MASTER
-+ select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
- help
- This selects a driver for the Atmel SPI Controller, present on
- many AT32 (AVR32) and AT91 (ARM) chips.
-@@ -100,6 +101,24 @@
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
-
-+config SPI_AT91
-+ tristate "AT91RM9200 Bitbang SPI Master"
-+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+ select SPI_BITBANG
-+ select SPI_AT91_MANUAL_CS
-+ help
-+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+ The SPI_ATMEL driver will be its replacement, using the native
-+ SPI hardware and its DMA controller.
-+
-+config SPI_AT91_MANUAL_CS
-+ bool
-+ depends on ARCH_AT91RM9200
-+ help
-+ Works around an AT91RM9200 problem whereby the SPI chip-select
-+ will be wrongly disabled. The workaround uses those pins as
-+ GPIOs instead of letting the SPI controller manage them.
-+
- config SPI_IMX
- tristate "Freescale iMX SPI controller"
- depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN linux-2.6.22.1-0rig/drivers/spi/Makefile linux-2.6.22.1/drivers/spi/Makefile
---- linux-2.6.22.1-0rig/drivers/spi/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/spi/Makefile 2007-07-17 23:35:24.000000000 +0200
-@@ -23,6 +23,7 @@
- obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
-+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
- # ... add above this line ...
-
- # SPI protocol drivers (device/link on bus)
-diff -urN linux-2.6.22.1-0rig/drivers/spi/spi_at91_bitbang.c linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.22.1-0rig/drivers/spi/spi_at91_bitbang.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/spi/spi_at91_bitbang.c 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,207 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ * - other at91 parts (like at91sam9) have multiple controllers
-+ * and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ * - rm9200 spi chipselects drop wrongly, so the native driver
-+ * will need to use gpios much like this does.
-+ *
-+ * - real hardware only allows 8..16 bits per word, while this
-+ * bitbanger allows 1..32 (incompatible superset).
-+ *
-+ * - this disregards clock parameters. with inlined gpio calls,
-+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ * than using the subroutined veresion from txrx_word().
-+ *
-+ * - suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define spi_miso_bit AT91_PIN_PA0
-+#define spi_mosi_bit AT91_PIN_PA1
-+#define spi_sck_bit AT91_PIN_PA2
-+
-+struct at91_spi {
-+ struct spi_bitbang bitbang;
-+ struct platform_device *pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+ at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+ return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+ unsigned long cs = (unsigned long) spi->controller_data;
-+
-+ /* set default clock polarity */
-+ if (is_active)
-+ setsck(spi, spi->mode & SPI_CPOL);
-+
-+ /* only support active-low (default) */
-+ at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE: this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define spidelay(X) do{} while(0)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+ int status;
-+ struct spi_master *master;
-+ struct at91_spi *at91_spi;
-+
-+ if (pdev->id != 0) /* SPI0 bus */
-+ return -EINVAL;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+ if (!master)
-+ return -ENOMEM;
-+
-+ at91_spi = spi_master_get_devdata(master);
-+ at91_spi->pdev = pdev;
-+ platform_set_drvdata(pdev, at91_spi);
-+
-+ /* SPI and bitbang hookup */
-+ master->bus_num = 0;
-+ master->num_chipselect = 4;
-+
-+ at91_spi->bitbang.master = spi_master_get(master);
-+ at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+ status = spi_bitbang_start(&at91_spi->bitbang);
-+ if (status < 0)
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
-+ int status;
-+
-+ /* stop() unregisters child devices too */
-+ status = spi_bitbang_stop(&at91_spi->bitbang);
-+ (void) spi_master_put(at91_spi->bitbang.master);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+ .probe = at91_spi_probe,
-+ .remove = __exit_p(at91_spi_remove),
-+ .driver = {
-+ .name = "at91_spi",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+ at91_set_gpio_output(spi_sck_bit, 0);
-+ at91_set_gpio_output(spi_mosi_bit, 0);
-+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+ /* register driver */
-+ return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+ platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22.1-0rig/drivers/usb/gadget/at91_udc.c linux-2.6.22.1/drivers/usb/gadget/at91_udc.c
---- linux-2.6.22.1-0rig/drivers/usb/gadget/at91_udc.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/usb/gadget/at91_udc.c 2007-07-17 23:35:24.000000000 +0200
-@@ -1803,7 +1803,7 @@
- */
- if ((!udc->suspended && udc->addr)
- || !wake
-- || at91_suspend_entering_slow_clock()) {
-+ || clk_must_disable(udc->fclk)) {
- pullup(udc, 0);
- wake = 0;
- } else
-diff -urN linux-2.6.22.1-0rig/drivers/usb/host/ohci-at91.c linux-2.6.22.1/drivers/usb/host/ohci-at91.c
---- linux-2.6.22.1-0rig/drivers/usb/host/ohci-at91.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/usb/host/ohci-at91.c 2007-07-17 23:35:24.000000000 +0200
-@@ -299,7 +299,7 @@
- *
- * REVISIT: some boards will be able to turn VBUS off...
- */
-- if (at91_suspend_entering_slow_clock()) {
-+ if (clk_must_disable(fclk)) {
- ohci_usb_reset (ohci);
- at91_stop_clock();
- }
-diff -urN linux-2.6.22.1-0rig/drivers/video/backlight/kb920x_bl.c linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.22.1-0rig/drivers/video/backlight/kb920x_bl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/video/backlight/kb920x_bl.c 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,164 @@
-+/*
-+ * Backlight Driver for KB9202
-+ *
-+ * Copyright (c) 2006 KwikByte
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+/* The backlight is on(1)/off(0) */
-+#define KB9202_DEFAULT_INTENSITY 1
-+#define KB9202_MAX_INTENSITY 1
-+
-+static int kb9202bl_suspended;
-+static int current_intensity = 0;
-+static DEFINE_SPINLOCK(bl_lock);
-+
-+static int kb9202bl_set_intensity(struct backlight_device *bd)
-+{
-+ unsigned long flags;
-+ int intensity = bd->props.brightness;
-+
-+ if (bd->props.power != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (kb9202bl_suspended)
-+ intensity = 0;
-+
-+ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
-+ intensity = 1;
-+
-+ spin_lock_irqsave(&bl_lock, flags);
-+ if (intensity)
-+ gpio_set_value(AT91_PIN_PC23, 1);
-+ else
-+ gpio_set_value(AT91_PIN_PC23, 0);
-+ spin_unlock_irqrestore(&bl_lock, flags);
-+
-+ current_intensity = intensity;
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_get_intensity(struct backlight_device *bd)
-+{
-+ return current_intensity;
-+}
-+
-+static struct backlight_ops kb9202bl_ops = {
-+ .get_brightness = kb9202bl_get_intensity,
-+ .update_status = kb9202bl_set_intensity,
-+};
-+
-+static int __init kb9202bl_probe(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd;
-+
-+ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
-+ if (IS_ERR(bd))
-+ return PTR_ERR(bd);
-+
-+ platform_set_drvdata(pdev, bd);
-+
-+ bd->props.max_brightness = KB9202_MAX_INTENSITY;
-+ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ return 0;
-+}
-+
-+static int kb9202bl_remove(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ bd->props.brightness = 0;
-+ bd->props.power = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+
-+ backlight_device_unregister(bd);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 1;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+
-+static int kb9202bl_resume(struct platform_device *dev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+ kb9202bl_suspended = 0;
-+ (void) kb9202bl_set_intensity(bd);
-+ return 0;
-+}
-+#else
-+#define kb9202bl_suspend NULL
-+#define kb9202bl_resume NULL
-+#endif
-+
-+static struct platform_driver kb9202bl_driver = {
-+ .probe = kb9202bl_probe,
-+ .remove = kb9202bl_remove,
-+ .suspend = kb9202bl_suspend,
-+ .resume = kb9202bl_resume,
-+ .driver = {
-+ .name = "kb9202-bl",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static struct platform_device *kb9202bl_device;
-+
-+static int __init kb9202bl_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&kb9202bl_driver);
-+ if (!ret) {
-+ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
-+ if (!kb9202bl_device)
-+ return -ENOMEM;
-+
-+ ret = platform_device_add(kb9202bl_device);
-+ if (ret) {
-+ platform_device_put(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __exit kb9202bl_exit(void)
-+{
-+ platform_device_unregister(kb9202bl_device);
-+ platform_driver_unregister(&kb9202bl_driver);
-+}
-+
-+module_init(kb9202bl_init);
-+module_exit(kb9202bl_exit);
-+
-+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
-+MODULE_DESCRIPTION("KB9202 Backlight Driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22.1-0rig/drivers/video/backlight/Kconfig linux-2.6.22.1/drivers/video/backlight/Kconfig
---- linux-2.6.22.1-0rig/drivers/video/backlight/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/video/backlight/Kconfig 2007-07-17 23:35:24.000000000 +0200
-@@ -71,3 +71,11 @@
- help
- If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
- backlight driver.
-+
-+config BACKLIGHT_KB920x
-+ tristate "KwikByte KB9202 Backlight Driver"
-+ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
-+ default y
-+ help
-+ If you have a KwikByte KB9202 board, say Y to enable the
-+ backlight driver.
-diff -urN linux-2.6.22.1-0rig/drivers/video/backlight/Makefile linux-2.6.22.1/drivers/video/backlight/Makefile
---- linux-2.6.22.1-0rig/drivers/video/backlight/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/video/backlight/Makefile 2007-07-17 23:35:24.000000000 +0200
-@@ -7,3 +7,4 @@
- obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
- obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
-+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN linux-2.6.22.1-0rig/drivers/video/Kconfig linux-2.6.22.1/drivers/video/Kconfig
---- linux-2.6.22.1-0rig/drivers/video/Kconfig 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/video/Kconfig 2007-07-17 23:35:24.000000000 +0200
-@@ -822,6 +822,17 @@
- framebuffer. Product specs at
- <http://www.erd.epson.com/vdc/html/products.htm>.
-
-+config FB_S1D15605
-+ tristate "Epson S1D15605 framebuffer support"
-+ depends on FB
-+ default m if MACH_KB9200
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ Build in support for the S1D15605 Epson Research 128x64
-+ LCD controller as a framebuffer.
-+
- config FB_S1D13XXX
- tristate "Epson S1D13XXX framebuffer support"
- depends on FB
-@@ -835,7 +846,7 @@
-
- config FB_ATMEL
- tristate "AT91/AT32 LCD Controller support"
-- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
-+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
-diff -urN linux-2.6.22.1-0rig/drivers/video/Makefile linux-2.6.22.1/drivers/video/Makefile
---- linux-2.6.22.1-0rig/drivers/video/Makefile 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/drivers/video/Makefile 2007-07-17 23:35:24.000000000 +0200
-@@ -87,7 +87,8 @@
- obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
--obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
-+obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN linux-2.6.22.1-0rig/drivers/video/s1d15605fb.c linux-2.6.22.1/drivers/video/s1d15605fb.c
---- linux-2.6.22.1-0rig/drivers/video/s1d15605fb.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/drivers/video/s1d15605fb.c 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,659 @@
-+/*
-+ * drivers/video/s1d15605.c
-+ *
-+ * Adapted from several sources including:
-+ * 1) Driver for AT91 LCD Controller
-+ * Copyright (C) 2006 Atmel
-+ *
-+ * 2) Copyright (C) 2005 S. Kevin Hester
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
-+ *
-+ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
-+ * display. This display uses a clone of the common Epson SED 1531 display
-+ * controller.
-+ *
-+ * I've heavily borrowed code from the vfb.c driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifdef DEBUG
-+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
-+#else
-+#define MSG(string, args...)
-+#endif
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+#include <asm/backlight.h>
-+#endif
-+
-+#define VIDEOWIDTH 128
-+#define VIDEOHEIGHT 64
-+#define VIDEODEPTH 1 /* bits/pixel */
-+#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
-+
-+/* The number of bytes that actually go to the device */
-+#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
-+#define VIDEOMEMSIZE PAGE_SIZE
-+
-+static struct fb_var_screeninfo s1d15605_default __initdata = {
-+ .xres = VIDEOWIDTH,
-+ .yres = VIDEOHEIGHT,
-+ .xres_virtual = VIDEOWIDTH,
-+ .yres_virtual = VIDEOHEIGHT,
-+ .bits_per_pixel = VIDEODEPTH,
-+ .red = { 0, 1, 0 },
-+ .green = { 0, 1, 0 },
-+ .blue = { 0, 1, 0 },
-+ .activate = FB_ACTIVATE_NOW,
-+ .pixclock = 20000,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
-+ .id = "s1d15605",
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_MONO10,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
-+
-+struct s1d15605fb_info {
-+ struct fb_info *info;
-+ char *mmio;
-+ unsigned long reset_pin;
-+ struct platform_device *pdev;
-+};
-+
-+/*
-+ * LCD device interface
-+ */
-+#define RESET_DISPLAY 0xE2
-+#define LCD_BIAS_1_9 0xA2
-+#define ADC_SELECT_REVERSE 0xA1
-+#define COMMON_OUTPUT_NORMAL 0xC0
-+#define V5_RESISTOR_RATIO 0x26
-+#define ELECTRONIC_VOLUME_SET 0x81
-+#define ELECTRONIC_VOLUME_INIT 0x20
-+#define POWER_CONTROL_SET 0x28
-+#define VOLTAGE_REGULATOR 0x02
-+#define VOLTAGE_FOLLOWER 0x01
-+#define BOOSTER_CIRCUIT 0x04
-+#define DISPLAY_ON 0xAF
-+#define START_LINE_SET 0x40
-+#define PAGE_ADDRESS_SET 0xB0
-+#define COLUMN_ADDRESS_HIGH 0x10
-+#define COLUMN_ADDRESS_LOW 0x00
-+#define RESISTOR_RATIO_START 0x20
-+
-+#define NUM_OF_PAGES 8
-+#define NUM_OF_COLUMNS 128
-+
-+#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
-+#define READ_COMMAND __raw_readb((sinfo)->mmio)
-+#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
-+#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
-+
-+
-+/*
-+ * s1d15605fb_resize_framebuffer
-+ *
-+ * Free allocated space if different. Allocate on new of changed.
-+ * Returns -ENOMEM if the new framebuffer can not be allocated,
-+ * zero on success.
-+ */
-+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
-+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ struct fb_var_screeninfo *var = &info->var;
-+ unsigned int new_size;
-+ void *new_vaddr;
-+
-+ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
-+
-+ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
-+ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
-+
-+ if (new_size == fix->smem_len)
-+ return 0;
-+
-+ if (fix->smem_len) {
-+ kfree(info->screen_base);
-+ }
-+
-+ new_vaddr = kmalloc(new_size, GFP_KERNEL);
-+
-+ if (!new_vaddr) {
-+ fix->smem_len = 0;
-+ return -ENOMEM;
-+ }
-+
-+ info->screen_base = new_vaddr;
-+ fix->smem_start = (unsigned)new_vaddr;
-+ fix->smem_len = new_size;
-+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
-+ * bottom) each page seems to be eight pixels high, where these eight pixels are
-+ * one byte
-+ */
-+static void s1d15605_update(struct fb_info *info)
-+{
-+ struct s1d15605fb_info *sinfo = info->par;
-+ int page, i, row, colmask;
-+ u8 retVal, *rowPtr;
-+
-+ WRITE_COMMAND(START_LINE_SET);
-+ for (page = 0; page < NUM_OF_PAGES; ++page) {
-+ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
-+ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
-+ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
-+
-+ for (i = 0; i < NUM_OF_COLUMNS; ++i)
-+ {
-+ /* point of opportunity: optimization */
-+ colmask = (1 << (i & 0x7));
-+ rowPtr = (u8*)(info->screen_base);
-+ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
-+ rowPtr += (i >> 3);
-+ retVal = 0;
-+ for (row = 0; row < 8; ++row)
-+ {
-+ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
-+ rowPtr += VIDEOWIDTH_BYTES;
-+ }
-+ WRITE_DATA(retVal);
-+ }
-+ }
-+
-+ WRITE_COMMAND(DISPLAY_ON);
-+}
-+
-+
-+/*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+ /*
-+ * Some very basic checks
-+ */
-+ if (!var->xres)
-+ var->xres = 1;
-+ if (!var->yres)
-+ var->yres = 1;
-+ if (var->xres > var->xres_virtual)
-+ var->xres_virtual = var->xres;
-+ if (var->yres > var->yres_virtual)
-+ var->yres_virtual = var->yres;
-+
-+ if(var->bits_per_pixel > VIDEODEPTH)
-+ return -EINVAL;
-+
-+ /*
-+ * Memory limit
-+ */
-+ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
-+ ACTUALVIDEOMEMSIZE)
-+ return -ENOMEM;
-+
-+ /*
-+ * Now that we checked it we alter var. The reason being is that the video
-+ * mode passed in might not work but slight changes to it might make it
-+ * work. This way we let the user know what is acceptable.
-+ */
-+ switch (var->bits_per_pixel) {
-+ case 1:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ var->xoffset = var->yoffset = 0;
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+ var->transp.msb_right = 0;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int s1d15605_set_par(struct fb_info *info)
-+{
-+ int ret;
-+
-+ MSG("%s:\n", __func__);
-+ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
-+
-+ ret = s1d15605fb_resize_framebuffer(info->par);
-+
-+ info->fix.visual = FB_VISUAL_MONO10;
-+ return ret;
-+}
-+
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+ u_int transp, struct fb_info *info)
-+{
-+ if (regno > 1) /* no. of hw registers - we only do mono now */
-+ return 1;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Currently, the routine will simply shut-off the backlight and prevent
-+ * updates/refreshes. Modify according to application.
-+ *
-+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
-+ */
-+static int s1d15605_blank(int blank, struct fb_info *info)
-+{
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+ if (blank)
-+ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
-+ else
-+ pmac_backlight->props.power = FB_BLANK_UNBLANK;
-+ backlight_update_status(pmac_backlight);
-+#endif
-+ return 1;
-+}
-+
-+
-+/*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+/*
-+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
-+{
-+ if (var->vmode & FB_VMODE_YWRAP) {
-+ if (var->yoffset < 0
-+ || var->yoffset >= info->var.yres_virtual
-+ || var->xoffset)
-+ return -EINVAL;
-+ } else {
-+ if (var->xoffset + var->xres > info->var.xres_virtual ||
-+ var->yoffset + var->yres > info->var.yres_virtual)
-+ return -EINVAL;
-+ }
-+ info->var.xoffset = var->xoffset;
-+ info->var.yoffset = var->yoffset;
-+ if (var->vmode & FB_VMODE_YWRAP)
-+ info->var.vmode |= FB_VMODE_YWRAP;
-+ else
-+ info->var.vmode &= ~FB_VMODE_YWRAP;
-+ return 0;
-+}
-+*/
-+
-+
-+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
-+{
-+ cfb_copyarea(info, region);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
-+{
-+ cfb_fillrect(info, rect);
-+ s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
-+{
-+ cfb_imageblit(p, image);
-+ s1d15605_update(p);
-+}
-+
-+
-+/*
-+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
-+ */
-+static ssize_t s1d15605_write(struct file *file, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ unsigned long p = *ppos;
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int fbidx = iminor(inode);
-+ struct fb_info *info = registered_fb[fbidx];
-+ int err;
-+
-+ if (p > info->fix.smem_len)
-+ return -ENOSPC;
-+ if (count >= info->fix.smem_len)
-+ count = info->fix.smem_len;
-+ err = 0;
-+ if (count + p > info->fix.smem_len) {
-+ count = info->fix.smem_len - p;
-+ err = -ENOSPC;
-+ }
-+ if (count) {
-+ char *base_addr;
-+
-+ base_addr = info->screen_base;
-+ count -= copy_from_user(base_addr+p, buf, count);
-+ *ppos += count;
-+ err = -EFAULT;
-+ }
-+
-+ s1d15605_update(info);
-+
-+ if (count)
-+ return count;
-+
-+ return err;
-+}
-+
-+#ifdef USE_PRIVATE_VMA_FXS
-+static void s1d15605_vma_open(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static void s1d15605_vma_close(struct vm_area_struct *vma)
-+{
-+ // FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
-+ unsigned long address, int *type)
-+{
-+ struct page *page;
-+ struct fb_info *info = vma->vm_private_data;
-+
-+ page = virt_to_page(info->screen_base);
-+ get_page(page);
-+
-+ // FIXME - now someone has a link to our page, start periodically blitting
-+ // latest updates to the actual device.
-+
-+ return page;
-+}
-+
-+
-+static struct vm_operations_struct s1d15605_vm_ops = {
-+ .open = s1d15605_vma_open,
-+ .close = s1d15605_vma_close,
-+ .nopage = s1d15605_vma_nopage
-+};
-+
-+
-+/* We don't do much here - because we have special vm_ops */
-+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+ vma->vm_ops = &s1d15605_vm_ops;
-+ vma->vm_flags |= VM_RESERVED;
-+ vma->vm_private_data = info;
-+ s1d15605_vma_open(vma);
-+
-+ return 0;
-+}
-+#endif /* USE_PRIVATE_VMA_FXS */
-+
-+
-+static struct fb_ops s1d15605fb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = s1d15605_check_var,
-+ .fb_set_par = s1d15605_set_par,
-+ .fb_setcolreg = s1d15605_setcolreg,
-+ .fb_blank = s1d15605_blank,
-+// .fb_pan_display = s1d15605_pan_display,
-+ .fb_fillrect = s1d15605_fillrect,
-+ .fb_copyarea = s1d15605_copyarea,
-+ .fb_imageblit = s1d15605_imageblit,
-+ .fb_write = s1d15605_write,
-+#ifdef USE_PRIVATE_VMA_FXS
-+ .fb_mmap = s1d15605_mmap,
-+#endif
-+};
-+
-+
-+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
-+
-+ char value;
-+
-+ /* release the reset line by reading the device - proto hardware */
-+ value = READ_COMMAND;
-+ value = READ_COMMAND;
-+
-+#ifdef CONFIG_MACH_KB9200
-+ /* new boards have dedicated reset line */
-+ gpio_set_value(sinfo->reset_pin, 1);
-+#endif
-+
-+ /* initialize the device within 5ms */
-+ WRITE_COMMAND(RESET_DISPLAY);
-+ WRITE_COMMAND(LCD_BIAS_1_9);
-+ WRITE_COMMAND(ADC_SELECT_REVERSE);
-+ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
-+ WRITE_COMMAND(V5_RESISTOR_RATIO);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
-+ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
-+ WRITE_COMMAND(DISPLAY_ON);
-+
-+ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
-+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+ WRITE_COMMAND(0x33);
-+}
-+
-+
-+static int s1d15605fb_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct s1d15605fb_info *sinfo;
-+ int ret;
-+
-+ MSG("%s\n", __func__);
-+
-+ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
-+ dev_err(dev, "Cannot allocate framebuffer struct\n");
-+ return -ENOMEM;
-+ }
-+
-+ sinfo = info->par;
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ if (pdev->num_resources < 2) {
-+ dev_err(dev, "Resources unusable\n");
-+ ret = -ENODEV;
-+ goto free_info;
-+ }
-+
-+ info->fbops = &s1d15605fb_ops;
-+ strcpy(info->fix.id, pdev->name);
-+
-+ info->fix.mmio_start = pdev->resource[0].start;
-+ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+ sinfo->reset_pin = pdev->resource[1].start;
-+
-+ ret = s1d15605fb_resize_framebuffer(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
-+ goto free_fb;
-+ }
-+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
-+ }
-+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "Cannot map LCD memory region\n");
-+ goto release_mem;
-+ }
-+
-+ s1d15605_device_init(sinfo);
-+
-+ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
-+
-+ if (!ret || (ret == 4))
-+ info->var = s1d15605_default;
-+
-+ info->fix = s1d15605_fix;
-+ info->flags = FBINFO_FLAG_DEFAULT |
-+/* FBINFO_HWACCEL_YPAN | */
-+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
-+
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
-+ goto unmap_mmio;
-+ }
-+
-+ dev_set_drvdata(dev, info);
-+
-+ memset(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_NOW;
-+ ret = fb_set_var(info, &info->var);
-+ if (ret) {
-+ dev_warn(dev, "Unable to set display parameters\n");
-+ }
-+
-+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+ dev_dbg(dev, "%s SUCCESS\n", __func__);
-+
-+ dev_info(dev, "Driver $Revision: 1.1 $\n");
-+
-+ return 0;
-+
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ kfree(info->screen_base);
-+
-+free_info:
-+ framebuffer_release(info);
-+
-+ dev_dbg(dev, "%s FAILED\n", __func__);
-+ return ret;
-+}
-+
-+
-+static int s1d15605fb_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct s1d15605fb_info *sinfo = info->par;
-+
-+ if (!sinfo)
-+ return 0;
-+
-+ unregister_framebuffer(info);
-+
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+
-+ kfree(info->screen_base);
-+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
-+ return 0;
-+}
-+
-+
-+static struct platform_driver s1d15605fb_driver = {
-+ .probe = s1d15605fb_probe,
-+ .remove = s1d15605fb_remove,
-+ .driver = {
-+ .name = "s1d15605fb",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+
-+static int __init s1d15605fb_init(void)
-+{
-+ return platform_driver_register(&s1d15605fb_driver);
-+}
-+
-+
-+static void __exit s1d15605fb_exit(void)
-+{
-+ platform_driver_unregister(&s1d15605fb_driver);
-+}
-+
-+
-+module_init(s1d15605fb_init);
-+module_exit(s1d15605fb_exit);
-+
-+
-+MODULE_AUTHOR("KwikByte");
-+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
-diff -urN linux-2.6.22.1-0rig/include/asm-arm/arch-at91/at91_mci.h linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h
---- linux-2.6.22.1-0rig/include/asm-arm/arch-at91/at91_mci.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/include/asm-arm/arch-at91/at91_mci.h 2007-07-17 23:35:24.000000000 +0200
-@@ -26,6 +26,9 @@
- #define AT91_MCI_MR 0x04 /* Mode Register */
- #define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
- #define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
-+#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
-+#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
-+#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
- #define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
- #define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
- #define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-diff -urN linux-2.6.22.1-0rig/include/asm-arm/arch-at91/at91_pmc.h linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.22.1-0rig/include/asm-arm/arch-at91/at91_pmc.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/include/asm-arm/arch-at91/at91_pmc.h 2007-07-17 23:35:24.000000000 +0200
-@@ -37,7 +37,9 @@
- #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
- #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
--#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
-+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */
-+
-+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
- #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
- #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
- #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-diff -urN linux-2.6.22.1-0rig/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.22.1-0rig/include/asm-arm/arch-at91/at91sam9260_matrix.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/include/asm-arm/arch-at91/at91sam9260_matrix.h 2007-07-17 23:35:24.000000000 +0200
-@@ -67,7 +67,7 @@
- #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
- #define AT91_MATRIX_CS4A_SMC (0 << 4)
- #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
--#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
-+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
- #define AT91_MATRIX_CS5A_SMC (0 << 5)
- #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
- #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-diff -urN linux-2.6.22.1-0rig/include/asm-arm/arch-at91/board.h linux-2.6.22.1/include/asm-arm/arch-at91/board.h
---- linux-2.6.22.1-0rig/include/asm-arm/arch-at91/board.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/include/asm-arm/arch-at91/board.h 2007-07-17 23:35:24.000000000 +0200
-@@ -124,9 +124,21 @@
- };
- extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-
-+ /* ISI */
-+extern void __init at91_add_device_isi(void);
-+
- /* LEDs */
- extern u8 at91_leds_cpu;
- extern u8 at91_leds_timer;
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-
-+struct at91_gpio_led {
-+ u8 index; /* index of LED */
-+ char* name; /* name of LED */
-+ u8 gpio; /* AT91_PIN_xx */
-+ u8 flags; /* 1=active-high */
-+ char* trigger; /* default trigger */
-+};
-+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
-+
- #endif
-diff -urN linux-2.6.22.1-0rig/include/asm-arm/arch-at91/ics1523.h linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.22.1-0rig/include/asm-arm/arch-at91/ics1523.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/include/asm-arm/arch-at91/ics1523.h 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//* ATMEL Microcontroller Software Support - ROUSSET -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name : ics1523.h
-+//* Object : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED : Creation
-+//* 1.2 13/01/03 FB : Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
-+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
-+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
-+
-+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
-+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS1523_ACCESS_OK 0 /* OK */
-+#define ICS1523_ACCESS_ERROR -1 /* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition */
-+/*-------------------------------------------*/
-+
-+#define ICS_ADDR 0x26 /* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition */
-+/*--------------------------------------------------*/
-+
-+#define ICS_ICR 0x0 /* Input Control Register */
-+#define ICS_LCR 0x1 /* Loop Control Register */
-+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
-+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
-+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
-+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
-+#define ICS_OE 0x6 /* Output Enables Register */
-+#define ICS_OD 0x7 /* Osc Divider Register */
-+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
-+#define ICS_VID 0x10 /* Chip Version Register */
-+#define ICS_RID 0x11 /* Chip Revision Register */
-+#define ICS_SR 0x12 /* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition */
-+/*------------------------------------------------------*/
-+
-+#define ICS_PDEN 0x1 /* Phase Detector Enable */
-+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
-+#define ICS_REFPOL 0x4 /* External Reference Polarity */
-+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
-+#define ICS_FBKSEL 0x10 /* External Feedback Select */
-+#define ICS_FUNCSEL 0x20 /* Function Out Select */
-+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
-+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition */
-+/*-----------------------------------------------------*/
-+
-+#define ICS_PFD 0x7 /* Phase Detector Gain */
-+#define ICS_PSD 0x30 /* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
-+/*------------------------------------------------------------*/
-+
-+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
-+#define ICS_FILSEL 0x80 /* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
-+/*----------------------------------------------------------------*/
-+
-+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
-+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition */
-+/*-------------------------------------------------------*/
-+
-+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
-+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
-+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
-+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
-+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
-+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
-+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition */
-+/*----------------------------------------------------*/
-+
-+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
-+#define ICS_INSEL 0x80 /* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition */
-+/*---------------------------------------------------*/
-+
-+#define ICS_DPAR 0x0A /* DPA Reset Command */
-+#define ICS_PLLR 0x50 /* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition */
-+/*------------------------------------------------*/
-+
-+#define ICS_CHIPV 0xFF /* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition */
-+/*-------------------------------------------------*/
-+
-+#define ICS_CHIPR 0xFF /* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition */
-+/*------------------------------------------*/
-+
-+#define ICS_DPALOCK 0x1 /* DPA Lock Status */
-+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
-diff -urN linux-2.6.22.1-0rig/include/asm-arm/arch-at91/spi.h linux-2.6.22.1/include/asm-arm/arch-at91/spi.h
---- linux-2.6.22.1-0rig/include/asm-arm/arch-at91/spi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.22.1/include/asm-arm/arch-at91/spi.h 2007-07-17 23:35:24.000000000 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR 153 /* registered device number */
-+
-+#define DEFAULT_SPI_CLK 6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ * DataFlash uses maximum of 2
-+ * spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS 8
-+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
-+ int txlen[MAX_SPI_TRANSFERS];
-+ void* rx[MAX_SPI_TRANSFERS]; /* receive */
-+ int rxlen[MAX_SPI_TRANSFERS];
-+ int nr_transfers; /* number of transfers */
-+ int curr; /* current transfer */
-+};
-+
-+struct spi_local {
-+ unsigned int pcs; /* Peripheral Chip Select value */
-+
-+ struct spi_transfer_list *xfers; /* current transfer list */
-+ dma_addr_t tx, rx; /* DMA address for current transfer */
-+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
-diff -urN linux-2.6.22.1-0rig/include/linux/clk.h linux-2.6.22.1/include/linux/clk.h
---- linux-2.6.22.1-0rig/include/linux/clk.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/include/linux/clk.h 2007-07-17 23:35:24.000000000 +0200
-@@ -121,4 +121,24 @@
- */
- struct clk *clk_get_parent(struct clk *clk);
-
-+/**
-+ * clk_must_disable - report whether a clock's users must disable it
-+ * @clk: one node in the clock tree
-+ *
-+ * This routine returns true only if the upcoming system state requires
-+ * disabling the specified clock.
-+ *
-+ * It's common for platform power states to constrain certain clocks (and
-+ * their descendants) to be unavailable, while other states allow that
-+ * clock to be active. A platform's power states often include an "all on"
-+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
-+ * operating states which sacrifice functionality for lower power usage.
-+ *
-+ * The constraint value is commonly tested in device driver suspend(), to
-+ * leave clocks active if they are needed for features like wakeup events.
-+ * On platforms that support reduced functionality operating states, the
-+ * constraint may also need to be tested during resume() and probe() calls.
-+ */
-+int clk_must_disable(struct clk *clk);
-+
- #endif
-diff -urN linux-2.6.22.1-0rig/include/linux/i2c-id.h linux-2.6.22.1/include/linux/i2c-id.h
---- linux-2.6.22.1-0rig/include/linux/i2c-id.h 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/include/linux/i2c-id.h 2007-07-17 23:35:24.000000000 +0200
-@@ -203,6 +203,7 @@
-
- /* --- PCA 9564 based algorithms */
- #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
-+#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
-
- /* --- ACPI Embedded controller algorithms */
- #define I2C_HW_ACPI_EC 0x1f0000
-diff -urN linux-2.6.22.1-0rig/sound/soc/at91/eti_b1_wm8731.c linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.22.1-0rig/sound/soc/at91/eti_b1_wm8731.c 2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.22.1/sound/soc/at91/eti_b1_wm8731.c 2007-07-17 23:35:24.000000000 +0200
-@@ -34,8 +34,7 @@
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
-
--#include <asm/arch/hardware.h>
--#include <asm/arch/at91_pio.h>
-+#include <asm/hardware.h>
- #include <asm/arch/gpio.h>
-
- #include "../codecs/wm8731.h"
-@@ -48,13 +47,6 @@
- #define DBG(x...)
- #endif
-
--#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
--#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
--#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
--#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
--#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
--#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
--
- static struct clk *pck1_clk;
- static struct clk *pllb_clk;
-
-@@ -277,7 +269,6 @@
- static int __init eti_b1_init(void)
- {
- int ret;
-- u32 ssc_pio_lines;
- struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
-
- if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -311,19 +302,12 @@
- goto fail_io_unmap;
- }
-
-- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
-- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
--
-- /* Reset all PIO registers and assign lines to peripheral A */
-- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
-- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
-+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
-+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
-+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
-+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
-+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
-+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
-
- /*
- * Set PCK1 parent to PLLB and its rate to 12 Mhz.
projects / buildroot.git / commitdiff