default "at91sam9262ek" if BR2_TARGET_AT91SAM9262EK
default "at91sam9263ek" if BR2_TARGET_AT91SAM9263EK
default "at91sam9xeek" if BR2_TARGET_AT91SAM9XEEK
- default "atstk1002" if BR2_TARGET_AVR32_ATSTK1002
+ default "atstk100x" if BR2_TARGET_AVR32_ATSTK1002
default "atngw100" if BR2_TARGET_AVR32_ATNGW100
default "atngw100-base" if BR2_TARGET_AVR32_ATNGW100_BASE
default "atngw100-expanded" if BR2_TARGET_AVR32_ATNGW100_EXPANDED
+++ /dev/null
-ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
-ATSTK1002_PATH=target/device/Atmel/atstk1002
-
-TARGET_SKELETON=$(ATSTK1002_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(ATSTK1002_PATH)/device_table.txt
-BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config
-endif
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.1
-# Wed Aug 1 14:06:14 2007
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
-# CONFIG_UTS_NS is not set
-CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type and features
-#
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1002=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-CONFIG_BOARD_ATSTK1002_J2_LED=y
-# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-CONFIG_BOARD_ATSTK1002_J2_RGB=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
-CONFIG_GPIO_DEV=y
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-# CONFIG_OWNERSHIP_TRACE is not set
-CONFIG_DW_DMAC=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_CMDLINE=""
-
-#
-# Power managment options
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_LZMA_INITRD=y
-# CONFIG_LZMA_INITRD_KMALLOC_ONLY is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT32AP700X_WDT=m
-CONFIG_AT32AP700X_WDT_TIMEOUT=2
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ATMELTWI=m
-CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# SPI devices
-#
-CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=m
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_ATMELMCI=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_AT32AP700X=m
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-# CONFIG_AUFS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_KPROBES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.5
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
-# CONFIG_UTS_NS is not set
-CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type and features
-#
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1002=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-CONFIG_BOARD_ATSTK1002_GPIO_MOUSE=y
-CONFIG_BOARD_ATSTK1002_J2_LED=y
-# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-CONFIG_BOARD_ATSTK1002_J2_RGB=y
-# CONFIG_BOARD_ATSTK1002_ENABLE_AC97 is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
-CONFIG_GPIO_DEV=y
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-# CONFIG_OWNERSHIP_TRACE is not set
-CONFIG_DW_DMAC=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_CMDLINE=""
-
-#
-# Power managment options
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT32AP700X_WDT=m
-CONFIG_AT32AP700X_WDT_TIMEOUT=2
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ATMELTWI=m
-CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# AVR32 devices
-#
-# CONFIG_SND_ATMEL_AC97 is not set
-
-#
-# SPI devices
-#
-CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=m
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_ATMELMCI=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_AT32AP700X=m
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_KPROBES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type and features
-#
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_CPU_AT32AP7001 is not set
-# CONFIG_CPU_AT32AP7002 is not set
-CONFIG_BOARD_ATSTK1002=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-CONFIG_BOARD_ATSTK1002_GPIO_MOUSE=y
-CONFIG_BOARD_ATSTK1000_J2_LED=y
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-CONFIG_BOARD_ATSTK1000_J2_RGB=y
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_GPIO_DEV=y
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_OWNERSHIP_TRACE is not set
-CONFIG_DW_DMAC=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_CMDLINE=""
-
-#
-# Power managment options
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT32AP700X_WDT=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_ATMELTWI=m
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# AVR32 devices
-#
-# CONFIG_SND_ATMEL_AC97 is not set
-
-#
-# SPI devices
-#
-CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=m
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_AT32AP700X=m
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_KPROBES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Feb 17 16:50:44 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type and features
-#
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-CONFIG_BOARD_ATSTK1002=y
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
-# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-# CONFIG_GPIO_DEV is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-CONFIG_DW_DMAC=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MACB=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ATMELTWI is not set
-CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# AVR32 devices
-#
-# CONFIG_SND_ATMEL_AC97 is not set
-
-#
-# SPI devices
-#
-CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=m
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Sun Feb 17 13:10:12 2008
-#
-BR2_HAVE_DOT_CONFIG=y
-BR2_VERSION="0.10.0-svn"
-# BR2_alpha is not set
-# BR2_arm is not set
-# BR2_armeb is not set
-BR2_avr32=y
-# BR2_cris is not set
-# BR2_ia64 is not set
-# BR2_i386 is not set
-# BR2_m68k is not set
-# BR2_mips is not set
-# BR2_mipsel is not set
-# BR2_nios2 is not set
-# BR2_powerpc is not set
-# BR2_s390 is not set
-# BR2_sh is not set
-# BR2_sh64 is not set
-# BR2_sparc is not set
-# BR2_sparc64 is not set
-# BR2_x86_64 is not set
-BR2_at32ap7000=y
-# BR2_at32ap7001 is not set
-# BR2_at32ap7002 is not set
-BR2_ARCH="avr32"
-BR2_ENDIAN="BIG"
-
-#
-# Target options
-#
-
-#
-# Project Options
-#
-BR2_PROJECT="atstk1002-no-mplayer"
-BR2_HOSTNAME="stk1000.example.net"
-BR2_BANNER="ATSTK1002 ($(DATE))"
-
-#
-# Preset Devices
-#
-BR2_TARGET_ATMEL=y
-
-#
-# Atmel AVR32 Specific Device Support
-#
-BR2_TARGET_AVR32=y
-BR2_TARGET_AT32AP7000=y
-# BR2_TARGET_AT32AP7001 is not set
-# BR2_TARGET_AT32AP7002 is not set
-
-#
-# Development board support
-#
-BR2_TARGET_AVR32_ATSTK1002=y
-# BR2_TARGET_AVR32_ATNGW100 is not set
-# BR2_TARGET_AVR32_ATNGW100_BASE is not set
-# BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
-BR2_BOARD_NAME="atstk1002"
-
-#
-# Package support
-#
-
-#
-# Secondary locations
-#
-BR2_TARGET_ATMEL_COPYTO=""
-BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
-# BR2_TARGET_VALKA is not set
-
-#
-# Generic System Support
-#
-# BR2_TARGET_GENERIC_ACCESS_POINT is not set
-# BR2_TARGET_GENERIC_FIREWALL is not set
-# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
-
-#
-# Build options
-#
-BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
-BR2_ZCAT="zcat"
-BR2_BZCAT="bzcat"
-BR2_TAR_OPTIONS=""
-BR2_DL_DIR="$(BASE_DIR)/dl"
-
-#
-# Mirrors and Download locations
-#
-BR2_SOURCEFORGE_MIRROR="easynews"
-BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
-BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
-BR2_DEBIAN_MIRROR="http://ftp.debian.org"
-
-#
-# Atmel Mirrors
-#
-BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/"
-BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
-BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
-# BR2_FPU_SUFFIX is not set
-BR2_TOPDIR_PREFIX=""
-BR2_TOPDIR_SUFFIX=""
-BR2_ROOTFS_PREFIX="rootfs"
-BR2_ROOTFS_SUFFIX="$(DATE)"
-BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
-BR2_GNU_TARGET_SUFFIX="linux-uclibc"
-BR2_JLEVEL=1
-# BR2_PREFER_IMA is not set
-# BR2_DEPRECATED is not set
-BR2_RECENT=y
-BR2_STRIP_strip=y
-# BR2_STRIP_sstrip is not set
-# BR2_STRIP_none is not set
-# BR2_PREFER_STATIC_LIB is not set
-# BR2_HAVE_MANPAGES is not set
-# BR2_HAVE_INFOPAGES is not set
-BR2_UPDATE_CONFIG=y
-
-#
-# Toolchain
-#
-BR2_TOOLCHAIN_BUILDROOT=y
-# BR2_TOOLCHAIN_EXTERNAL is not set
-# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
-BR2_TOOLCHAIN_SOURCE=y
-BR2_EXT_GCC_VERSION_4_1_2=y
-BR2_EXT_GCC_VERSION_4_2_1=y
-BR2_EXT_BINUTILS_VERSION_2_17=y
-BR2_EXT_UCLIBC_VERSION_0_9_29=y
-BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
-
-#
-# Kernel Header Options
-#
-# BR2_KERNEL_HEADERS_2_4_25 is not set
-# BR2_KERNEL_HEADERS_2_4_27 is not set
-# BR2_KERNEL_HEADERS_2_4_29 is not set
-# BR2_KERNEL_HEADERS_2_4_31 is not set
-# BR2_KERNEL_HEADERS_2_6_9 is not set
-# BR2_KERNEL_HEADERS_2_6_11 is not set
-# BR2_KERNEL_HEADERS_2_6_12 is not set
-# BR2_KERNEL_HEADERS_2_6_20_4 is not set
-# BR2_KERNEL_HEADERS_2_6_20 is not set
-# BR2_KERNEL_HEADERS_2_6_21_5 is not set
-# BR2_KERNEL_HEADERS_2_6_21 is not set
-# BR2_KERNEL_HEADERS_2_6_22_1 is not set
-# BR2_KERNEL_HEADERS_2_6_22_10 is not set
-# BR2_KERNEL_HEADERS_2_6_22 is not set
-# BR2_KERNEL_HEADERS_2_6_23 is not set
-BR2_KERNEL_HEADERS_2_6_24=y
-# BR2_KERNEL_HEADERS_SNAP is not set
-BR2_DEFAULT_KERNEL_HEADERS="2.6.24"
-
-#
-# uClibc Options
-#
-# BR2_UCLIBC_VERSION_0_9_28_3 is not set
-BR2_UCLIBC_VERSION_0_9_29=y
-# BR2_UCLIBC_VERSION_SNAPSHOT is not set
-BR2_UCLIBC_CONFIG="target/device/Atmel/uClibc.config.avr32"
-# BR2_ENABLE_LOCALE is not set
-# BR2_PTHREADS_NONE is not set
-# BR2_PTHREADS is not set
-BR2_PTHREADS_OLD=y
-# BR2_PTHREADS_NATIVE is not set
-# BR2_PTHREAD_DEBUG is not set
-# BR2_UCLIBC_PROGRAM_INVOCATION is not set
-
-#
-# Binutils Options
-#
-BR2_BINUTILS_VERSION_2_17=y
-# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
-# BR2_BINUTILS_VERSION_2_18 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
-BR2_BINUTILS_VERSION="2.17"
-BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
-
-#
-# GCC Options
-#
-# BR2_GCC_VERSION_3_4_6 is not set
-# BR2_GCC_VERSION_4_0_4 is not set
-# BR2_GCC_VERSION_4_1_2 is not set
-# BR2_GCC_VERSION_4_2_0 is not set
-BR2_GCC_VERSION_4_2_1=y
-BR2_GCC_SUPPORTS_SYSROOT=y
-# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
-BR2_GCC_VERSION="4.2.1"
-# BR2_TOOLCHAIN_SYSROOT is not set
-# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
-BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-BR2_GCC_CROSS_CXX=y
-BR2_INSTALL_LIBSTDCPP=y
-BR2_GCC_SHARED_LIBGCC=y
-
-#
-# Ccache Options
-#
-# BR2_CCACHE is not set
-
-#
-# Gdb Options
-#
-# BR2_PACKAGE_GDB is not set
-BR2_PACKAGE_GDB_SERVER=y
-BR2_PACKAGE_GDB_HOST=y
-# BR2_GDB_VERSION_6_2_1 is not set
-# BR2_GDB_VERSION_6_3 is not set
-BR2_GDB_VERSION_6_4=y
-# BR2_GDB_VERSION_6_5 is not set
-# BR2_GDB_VERSION_6_6 is not set
-# BR2_GDB_VERSION_SNAPSHOT is not set
-BR2_GDB_VERSION="6.4"
-
-#
-# elf2flt
-#
-# BR2_ELF2FLT is not set
-# BR2_MKLIBS is not set
-
-#
-# Common Toolchain Options
-#
-# BR2_PACKAGE_SSTRIP_TARGET is not set
-# BR2_PACKAGE_SSTRIP_HOST is not set
-# BR2_ENABLE_MULTILIB is not set
-BR2_LARGEFILE=y
-BR2_INET_IPV6=y
-BR2_INET_RPC=y
-BR2_USE_WCHAR=y
-BR2_SOFT_FLOAT=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"
-BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
-
-#
-# Package Selection for the target
-#
-BR2_PACKAGE_BUSYBOX=y
-# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
-# BR2_BUSYBOX_VERSION_1_6_1 is not set
-# BR2_BUSYBOX_VERSION_1_7_X is not set
-# BR2_BUSYBOX_VERSION_1_8_X is not set
-BR2_BUSYBOX_VERSION_1_9_X=y
-# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.9.0"
-BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
-BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config"
-BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
-BR2_PACKAGE_BUSYBOX_SKELETON=y
-
-#
-# The minimum needed to build a uClibc development system
-#
-BR2_PACKAGE_BASH=y
-# B2_PACKAGE_BASH_LINK_SH is not set
-BR2_PACKAGE_BZIP2=y
-# BR2_PACKAGE_DIFFUTILS is not set
-# BR2_PACKAGE_FLEX is not set
-# BR2_PACKAGE_GCC_TARGET is not set
-# BR2_PACKAGE_MAKE is not set
-
-#
-# Other development stuff
-#
-# BR2_PACKAGE_AUTOCONF is not set
-# BR2_PACKAGE_AUTOMAKE is not set
-# BR2_PACKAGE_BISON is not set
-# BR2_PACKAGE_CCACHE_TARGET is not set
-# BR2_PACKAGE_CVS is not set
-# BR2_PACKAGE_DISTCC is not set
-# BR2_PACKAGE_DMALLOC is not set
-# BR2_PACKAGE_EXPAT is not set
-# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
-# BR2_PACKAGE_GETTEXT is not set
-# BR2_PACKAGE_LIBINTL is not set
-# BR2_PACKAGE_LIBGMP is not set
-# BR2_PACKAGE_LIBMPFR is not set
-# BR2_PACKAGE_LIBTOOL is not set
-# BR2_PACKAGE_M4 is not set
-# BR2_PACKAGE_PKGCONFIG is not set
-# BR2_READLINE is not set
-# BR2_PACKAGE_XERCES is not set
-
-#
-# Other stuff
-#
-# BR2_PACKAGE_AT is not set
-# BR2_PACKAGE_BERKELEYDB is not set
-# BR2_PACKAGE_BSDIFF is not set
-# BR2_PACKAGE_CUSTOMIZE is not set
-# BR2_PACKAGE_DASH is not set
-# BR2_PACKAGE_FCONFIG is not set
-BR2_PACKAGE_FILE=y
-# BR2_PACKAGE_FIS is not set
-# BR2_PACKAGE_KEXEC is not set
-# BR2_PACKAGE_ICU is not set
-# BR2_PACKAGE_IPKG is not set
-# BR2_PACKAGE_CUPS is not set
-# BR2_PACKAGE_NG_SPICE_REWORK is not set
-# BR2_PACKAGE_GAMIN is not set
-# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
-# BR2_PACKAGE_CLASSPATH is not set
-BR2_PACKAGE_LIBDAEMON=y
-# BR2_PACKAGE_LIBELF is not set
-# BR2_PACKAGE_LIBEVENT is not set
-# BR2_PACKAGE_LIBFLOAT is not set
-# BR2_PACKAGE_LIBGCRYPT is not set
-# BR2_PACKAGE_LIBGPG_ERROR is not set
-# BR2_PACKAGE_LIBLOCKFILE is not set
-# BR2_PACKAGE_LIBSYSFS is not set
-# BR2_PACKAGE_LIBXML2 is not set
-
-#
-# libxslt - disabled (requires pkgconfig)
-#
-# BR2_PACKAGE_LOCKFILE_PROGS is not set
-# BR2_PACKAGE_LSOF is not set
-# BR2_PACKAGE_LTP-TESTSUITE is not set
-# BR2_PACKAGE_LTRACE is not set
-# BR2_PACKAGE_LTT is not set
-# BR2_PACKAGE_PORTAGE is not set
-# BR2_PACKAGE_SQLITE is not set
-BR2_PACKAGE_STRACE=y
-# BR2_PACKAGE_SUDO is not set
-BR2_NETWORK_SUPPORT=y
-
-#
-# Networking applications
-#
-
-#
-# argus - disabled (requires libpcap)
-#
-BR2_PACKAGE_AVAHI=y
-BR2_PACKAGE_AVAHI_AUTOIPD=y
-
-#
-# mDNS/DNS-SD daemon - disabled (requires expat)
-#
-# BR2_PACKAGE_BOA is not set
-# BR2_PACKAGE_BIND is not set
-# BR2_PACKAGE_BRIDGE is not set
-# BR2_PACKAGE_CURL is not set
-# BR2_PACKAGE_LIBCURL is not set
-# BR2_PACKAGE_DNSMASQ is not set
-BR2_PACKAGE_DROPBEAR=y
-# BR2_PACKAGE_ETHTOOL is not set
-BR2_PACKAGE_HASERL=y
-# BR2_PACKAGE_HASERL_VERSION_0_8_0 is not set
-BR2_PACKAGE_HASERL_VERSION_0_9_21=y
-BR2_PACKAGE_HASERL_VERSION="0.9.21"
-# BR2_PACKAGE_IRDA_UTILS is not set
-# BR2_PACKAGE_IPERF is not set
-# BR2_PACKAGE_IPROUTE2 is not set
-
-#
-# ipsec-tools - disabled (requires openssl, flex and the flex library (libfl.a) )
-#
-# BR2_PACKAGE_IPTABLES is not set
-# BR2_PACKAGE_KISMET is not set
-# BR2_PACKAGE_L2TP is not set
-# BR2_PACKAGE_LIBCGI is not set
-# BR2_PACKAGE_LIBCGICC is not set
-# BR2_PACKAGE_LIBEXOSIP2 is not set
-# BR2_PACKAGE_LIBOSIP2 is not set
-# BR2_PACKAGE_LIBPCAP is not set
-# BR2_PACKAGE_LINKS is not set
-BR2_PACKAGE_LRZSZ=y
-# BR2_PACKAGE_MDNSRESPONDER is not set
-# BR2_PACKAGE_MICROCOM is not set
-# BR2_PACKAGE_MROUTED is not set
-# BR2_PACKAGE_MUTT is not set
-BR2_PACKAGE_NBD=y
-BR2_PACKAGE_NCFTP=y
-
-#
-# ncFTP tools selection
-#
-# BR2_PACKAGE_NCFTP_GET is not set
-# BR2_PACKAGE_NCFTP_PUT is not set
-# BR2_PACKAGE_NCFTP_LS is not set
-# BR2_PACKAGE_NCFTP_BATCH is not set
-# BR2_PACKAGE_NCFTP_SPOOLER is not set
-# BR2_PACKAGE_NCFTP_BOOKMARKS is not set
-# BR2_PACKAGE_NETKITBASE is not set
-# BR2_PACKAGE_NETKITTELNET is not set
-# BR2_PACKAGE_NETPLUG is not set
-# BR2_PACKAGE_NETSNMP is not set
-# BR2_PACKAGE_NFS_UTILS is not set
-BR2_PACKAGE_NTP=y
-# BR2_PACKAGE_NTP_SNTP is not set
-# BR2_PACKAGE_OLSR is not set
-# BR2_PACKAGE_OPENNTPD is not set
-# BR2_PACKAGE_OPENSSH is not set
-# BR2_PACKAGE_OPENSSL is not set
-# BR2_PACKAGE_OPENVPN is not set
-# BR2_PACKAGE_OPENSWAN is not set
-BR2_PACKAGE_PORTMAP=y
-# BR2_PACKAGE_PPPD is not set
-# BR2_PACKAGE_RP_PPPOE is not set
-# BR2_PACKAGE_PPTP_LINUX is not set
-BR2_PACKAGE_PROFTPD=y
-# BR2_PACKAGE_QUAGGA is not set
-
-#
-# quagga suite
-#
-# BR2_PACKAGE_QUAGGA_ZEBRA is not set
-# BR2_PACKAGE_QUAGGA_BGPD is not set
-# BR2_PACKAGE_QUAGGA_RIPD is not set
-# BR2_PACKAGE_QUAGGA_RIPNGD is not set
-# BR2_PACKAGE_QUAGGA_OSPFD is not set
-# BR2_PACKAGE_QUAGGA_OSPF6D is not set
-# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
-# BR2_PACKAGE_QUAGGA_ISISD is not set
-BR2_PACKAGE_RSYNC=y
-# BR2_PACKAGE_SAMBA is not set
-# BR2_PACKAGE_SOCAT is not set
-# BR2_PACKAGE_STUNNEL is not set
-# BR2_PACKAGE_TCPDUMP is not set
-# BR2_PACKAGE_DHCPDUMP is not set
-# BR2_PACKAGE_TFTPD is not set
-# BR2_PACKAGE_TN5250 is not set
-# BR2_PACKAGE_TTCP is not set
-
-#
-# vpnc - disabled (requires libgcrypt and libgpg_error)
-#
-# BR2_PACKAGE_VTUN is not set
-BR2_PACKAGE_WIRELESS_TOOLS=y
-BR2_BLOCKDEV_SUPPORT=y
-
-#
-# dbus not available (need expat or libxml2)
-#
-# BR2_PACKAGE_DM is not set
-# BR2_PACKAGE_DMRAID is not set
-# BR2_PACKAGE_E2FSPROGS is not set
-# BR2_PACKAGE_LIBFUSE is not set
-# BR2_PACKAGE_GADGETFS_TEST is not set
-# BR2_PACKAGE_HAL is not set
-# BR2_PACKAGE_HWDATA is not set
-# BR2_PACKAGE_IOSTAT is not set
-# BR2_PACKAGE_LIBAIO is not set
-# BR2_PACKAGE_LIBRAW1394 is not set
-# BR2_PACKAGE_LIBUSB is not set
-# BR2_PACKAGE_LM_SENSORS is not set
-# BR2_PACKAGE_LVM2 is not set
-# BR2_PACKAGE_MDADM is not set
-# BR2_PACKAGE_MEMTESTER is not set
-# BR2_PACKAGE_MKDOSFS is not set
-BR2_PACKAGE_MTD=y
-BR2_PACKAGE_MTD_UTILS=y
-# BR2_PACKAGE_MTD_20061007 is not set
-# BR2_PACKAGE_MTD_20050122 is not set
-# BR2_PACKAGE_MTD_SNAPSHOT is not set
-
-#
-# MTD tools selection
-#
-BR2_PACKAGE_MTD_FLASH_ERASE=y
-BR2_PACKAGE_MTD_FLASH_ERASEALL=y
-BR2_PACKAGE_MTD_FLASH_INFO=y
-# BR2_PACKAGE_MTD_FLASH_LOCK is not set
-# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
-BR2_PACKAGE_MTD_FLASHCP=y
-# BR2_PACKAGE_MTD_ERASE is not set
-# BR2_PACKAGE_MTD_JFFS2DUMP is not set
-# BR2_PACKAGE_MTD_JFFS3DUMP is not set
-# BR2_PACKAGE_MTD_SUMTOOL is not set
-# BR2_PACKAGE_MTD_FTL_CHECK is not set
-# BR2_PACKAGE_MTD_FTL_FORMAT is not set
-# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
-# BR2_PACKAGE_MTD_NFTLDUMP is not set
-# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
-# BR2_PACKAGE_MTD_MKFSJFFS is not set
-# BR2_PACKAGE_MTD_NANDDUMP is not set
-# BR2_PACKAGE_MTD_NANDWRITE is not set
-BR2_PACKAGE_MTD_MTD_DEBUG=y
-# BR2_PACKAGE_MTD_DOCFDISK is not set
-# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
-# BR2_PACKAGE_NTFS-3G is not set
-# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
-# BR2_PACKAGE_RAIDTOOLS is not set
-# BR2_PACKAGE_SETSERIAL is not set
-# BR2_PACKAGE_SMARTMONTOOLS is not set
-# BR2_PACKAGE_USBMOUNT is not set
-# BR2_PACKAGE_USBUTILS is not set
-# BR2_PACKAGE_WIPE is not set
-# BR2_PACKAGE_XFSPROGS is not set
-BR2_AUDIO_SUPPORT=y
-BR2_PACKAGE_ALSA_LIB=y
-BR2_PACKAGE_ALSA_UTILS=y
-
-#
-# ALSA utils selection
-#
-# BR2_PACKAGE_ALSA_UTILS_ALSACONF is not set
-BR2_PACKAGE_ALSA_UTILS_ALSACTL=y
-BR2_PACKAGE_ALSA_UTILS_ALSAMIXER=y
-# BR2_PACKAGE_ALSA_UTILS_AMIDI is not set
-# BR2_PACKAGE_ALSA_UTILS_AMIXER is not set
-# BR2_PACKAGE_ALSA_UTILS_APLAY is not set
-# BR2_PACKAGE_ALSA_UTILS_ARECORD is not set
-# BR2_PACKAGE_ALSA_UTILS_IECSET is not set
-# BR2_PACKAGE_ALSA_UTILS_ACONNECT is not set
-# BR2_PACKAGE_ALSA_UTILS_APLAYMIDI is not set
-# BR2_PACKAGE_ALSA_UTILS_ARECORDMIDI is not set
-# BR2_PACKAGE_ALSA_UTILS_ASEQDUMP is not set
-# BR2_PACKAGE_ALSA_UTILS_ASEQNET is not set
-# BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST is not set
-
-#
-# asterisk - disabled (required openssl and mpg123)
-#
-# BR2_PACKAGE_AUMIX is not set
-# BR2_PACKAGE_LIBMAD is not set
-# BR2_PACKAGE_LIBOGG is not set
-# BR2_PACKAGE_LIBSNDFILE is not set
-
-#
-# libvorbis requires the package libogg to build
-#
-# BR2_PACKAGE_MADPLAY is not set
-# BR2_PACKAGE_MPG123 is not set
-BR2_PACKAGE_MPG123_ALSA=y
-# BR2_PACKAGE_SPEEX is not set
-BR2_GRAPHIC_SUPPORT=y
-
-#
-# text rendering libraries
-#
-BR2_PACKAGE_NCURSES=y
-# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
-# BR2_PACKAGE_NEWT is not set
-# BR2_PACKAGE_SLANG is not set
-
-#
-# text rendering applications
-#
-# BR2_PACKAGE_DIALOG is not set
-
-#
-# graphic libraries
-#
-# BR2_PACKAGE_DIRECTFB is not set
-# BR2_PACKAGE_IMAGEMAGICK is not set
-BR2_PACKAGE_JPEG=y
-BR2_PACKAGE_LIBPNG=y
-BR2_PACKAGE_LIBUNGIF=y
-# BR2_PACKAGE_SDL is not set
-# BR2_PACKAGE_SDL_TTF is not set
-# BR2_PACKAGE_TIFF is not set
-
-#
-# busybox graphic applications
-#
-
-#
-# --> (May be broken in busybox)
-#
-BR2_PACKAGE_FBV=y
-BR2_PACKAGE_FBSET=y
-
-#
-# other GUIs
-#
-# BR2_PACKAGE_QTE is not set
-BR2_PACKAGE_QTOPIA4=y
-# BR2_PACKAGE_QTOPIA4_DEBUG is not set
-BR2_PACKAGE_QTOPIA4_SHARED=y
-# BR2_PACKAGE_QTOPIA4_STATIC is not set
-BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL=y
-# BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL is not set
-BR2_PACKAGE_QTOPIA4_GPL_LICENSE_APPROVED=y
-# BR2_PACKAGE_QTOPIA4_QT3SUPPORT is not set
-BR2_PACKAGE_QTOPIA4_DEPTHS="-depths 24,16,8"
-BR2_PACKAGE_QTOPIA4_GIF=y
-BR2_PACKAGE_QTOPIA4_LIBMNG=y
-BR2_PACKAGE_QTOPIA4_NOJPEG=y
-# BR2_PACKAGE_QTOPIA4_SYSTEMJPEG is not set
-# BR2_PACKAGE_QTOPIA4_QTJPEG is not set
-# BR2_PACKAGE_QTOPIA4_NOZLIB is not set
-BR2_PACKAGE_QTOPIA4_QTZLIB=y
-# BR2_PACKAGE_QTOPIA4_SYSTEMZLIB is not set
-BR2_PACKAGE_QTOPIA4_EMB_PLATFORM="$(ARCH)"
-BR2_PACKAGE_XSERVER_none=y
-# BR2_PACKAGE_XSERVER_x11r7 is not set
-# BR2_PACKAGE_XSERVER_xorg is not set
-# BR2_PACKAGE_XSERVER_tinyx is not set
-BR2_X11_PREFIX="/usr"
-
-#
-# X libraries and helper libraries
-#
-
-#
-# atk - disabled (requires libglib2)
-#
-# BR2_PACKAGE_PANGO is not set
-# BR2_PACKAGE_LIBDRM is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
-# BR2_PACKAGE_LIBGLIB2 is not set
-# BR2_PACKAGE_LIBSEXY is not set
-
-#
-# fltk - disabled (requires Xorg(7))
-#
-# BR2_PACKAGE_FONTCONFIG is not set
-# BR2_PACKAGE_FREETYPE is not set
-# BR2_PACKAGE_TSLIB is not set
-# BR2_PACKAGE_OPENMOTIF is not set
-
-#
-# X Window managers
-#
-# BR2_PACKAGE_MATCHBOX is not set
-
-#
-# blackbox - disabled (requires Xorg(7))
-#
-
-#
-# X applications
-#
-
-#
-# dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
-#
-
-#
-# midori - disabled (requires Xorg(7))
-#
-# BR2_PACKAGE_WEBKIT is not set
-
-#
-# synergy - disabled (requires Xorg(7))
-#
-# BR2_PACKAGE_GQVIEW is not set
-# BR2_PACKAGE_LEAFPAD is not set
-# BR2_PACKAGE_TORSMO is not set
-# BR2_PACKAGE_PCMANFM is not set
-# BR2_PACKAGE_XSTROKE is not set
-# BR2_PACKAGE_SYLPHEED is not set
-
-#
-# Video libraries/codecs and applications
-#
-# BR2_PACKAGE_MPLAYER is not set
-BR2_COMPRESSOR_SUPPORT=y
-BR2_PACKAGE_LZO=y
-# BR2_PACKAGE_LZMA_TARGET is not set
-# BR2_PACKAGE_LZMA_HOST is not set
-BR2_PACKAGE_ZLIB=y
-# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
-# BR2_SCRIPTING_SUPPORT is not set
-# BR2_GAMES is not set
-
-#
-# Editors
-#
-# BR2_PACKAGE_VIM is not set
-
-#
-# Target filesystem options
-#
-
-#
-# filesystem for target device
-#
-# BR2_TARGET_ROOTFS_CRAMFS is not set
-# BR2_TARGET_ROOTFS_CLOOP is not set
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
-BR2_TARGET_ROOTFS_EXT2_INODES=0
-BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
-BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
-# BR2_TARGET_ROOTFS_EXT2_NONE is not set
-# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
-BR2_TARGET_ROOTFS_EXT2_BZIP2=y
-# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO=""
-# BR2_TARGET_ROOTFS_JFFS2 is not set
-# BR2_TARGET_ROOTFS_SQUASHFS is not set
-BR2_TARGET_ROOTFS_TAR=y
-BR2_TARGET_ROOTFS_TAR_NONE=y
-# BR2_TARGET_ROOTFS_TAR_GZIP is not set
-# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
-# BR2_TARGET_ROOTFS_TAR_LZMA is not set
-BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
-# BR2_TARGET_ROOTFS_CPIO is not set
-# BR2_TARGET_ROOTFS_INITRAMFS is not set
-
-#
-# bootloader for target device
-#
-BR2_TARGET_U_BOOT=y
-BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE=""
-BR2_TARGET_U_BOOT_CONFIG_BOARD="$(BR2_BOARD_NAME)_config"
-BR2_TARGET_U_BOOT_SERVERIP=""
-BR2_TARGET_U_BOOT_IPADDR=""
-BR2_TARGET_U_BOOT_ETH0ADDR=""
-BR2_TARGET_U_BOOT_ETH1ADDR=""
-BR2_TARGET_U_BOOT_BOOTARGS="console=ttyS0 root=/dev/mmcblk0p1 rootwait=1 fbmem=600k"
-BR2_TARGET_U_BOOT_BOOTCMD="mmcinit; ext2load mmc 0:1 0x90300000 /boot/uImage; bootm"
-
-#
-# Kernel
-#
-# BR2_KERNEL_none is not set
-BR2_KERNEL_LINUX_ADVANCED=y
-# BR2_KERNEL_LINUX is not set
-# BR2_KERNEL_HURD is not set
-BR2_PACKAGE_LINUX=y
-BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.22.5.config"
-BR2_PACKAGE_LINUX_FORMAT="uImage"
-BR2_KERNEL_CURRENT_VERSION="2.6.24"
-BR2_KERNEL_THIS_VERSION="2.6.24"
-BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
-BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
-BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
-# BR2_LINUX_2_6_STABLE is not set
-BR2_LINUX_2_6_24=y
-# BR2_LINUX_2_6_23 is not set
-# BR2_LINUX_2_6_22_10 is not set
-# BR2_LINUX_2_6_22_1 is not set
-# BR2_LINUX_2_6_22 is not set
-# BR2_LINUX_2_6_21_7 is not set
-# BR2_LINUX_2_6_21_5 is not set
-# BR2_LINUX_2_6_21 is not set
-# BR2_LINUX_2_6_20 is not set
-# BR2_LINUX26_CUSTOM is not set
-
-#
-# Patches
-#
-BR2_KERNEL_ADD_NO_PATCH=y
-# BR2_KERNEL_ADD_LATEST_MINORPATCH is not set
-# BR2_KERNEL_ADD_MINORPATCH is not set
-# BR2_KERNEL_ADD_LATEST_RC_PATCH is not set
-# BR2_KERNEL_ADD_RC_PATCH is not set
-# BR2_KERNEL_ADD_LATEST_SNAPSHOT is not set
-# BR2_KERNEL_ADD_SNAPSHOT is not set
-# BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
-# BR2_KERNEL_ADD_MM_PATCH is not set
-# BR2_KERNEL_ADD_PATCH is not set
-BR2_LINUX_BSP_PATCH=""
-# BR2_KERNEL_PREPATCHED is not set
-BR2_KERNEL_BASE=y
-# BR2_KERNEL_LATEST is not set
-BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
-BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
-
-#
-# Linux Kernel Configuration
-#
-BR2_PACKAGE_LINUX_USE_KCONFIG=y
-# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
-# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
-# BR2_LINUX_BIN_BZIMAGE is not set
-BR2_LINUX_BIN_UIMAGE=y
-# BR2_LINUX_BIN_VMLINUX is not set
-# BR2_LINUX_BIN_ZIMAGE is not set
-# BR2_LINUX_BIN_CUSTOM is not set
-
-#
-# Destinations for linux kernel binaries
-#
-BR2_LINUX_COPYTO_ROOTFS=y
-# BR2_LINUX_COPYTO_TFTPBOOT is not set
-BR2_LINUX_COPYTO=""
-# BR2_LINUX_COPY_CONFIGURATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Sat Mar 29 23:26:39 2008
-#
-BR2_HAVE_DOT_CONFIG=y
-BR2_VERSION="0.10.0-svn"
-# BR2_alpha is not set
-# BR2_arm is not set
-# BR2_armeb is not set
-BR2_avr32=y
-# BR2_cris is not set
-# BR2_ia64 is not set
-# BR2_i386 is not set
-# BR2_m68k is not set
-# BR2_mips is not set
-# BR2_mipsel is not set
-# BR2_nios2 is not set
-# BR2_powerpc is not set
-# BR2_s390 is not set
-# BR2_sh is not set
-# BR2_sh64 is not set
-# BR2_sparc is not set
-# BR2_sparc64 is not set
-# BR2_x86_64 is not set
-BR2_at32ap7000=y
-# BR2_at32ap7001 is not set
-# BR2_at32ap7002 is not set
-BR2_ARCH="avr32"
-BR2_ENDIAN="BIG"
-
-#
-# Target options
-#
-
-#
-# Project Options
-#
-BR2_PROJECT="atstk1002"
-BR2_HOSTNAME="stk1000.example.net"
-BR2_BANNER="ATSTK1002 ($(DATE))"
-
-#
-# Preset Devices
-#
-BR2_TARGET_ATMEL=y
-
-#
-# Atmel AVR32 Specific Device Support
-#
-BR2_TARGET_AVR32=y
-BR2_TARGET_AT32AP7000=y
-# BR2_TARGET_AT32AP7001 is not set
-# BR2_TARGET_AT32AP7002 is not set
-
-#
-# Development board support
-#
-BR2_TARGET_AVR32_ATSTK1002=y
-# BR2_TARGET_AVR32_ATNGW100 is not set
-# BR2_TARGET_AVR32_ATNGW100_BASE is not set
-# BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
-BR2_BOARD_NAME="atstk1002"
-
-#
-# Package support
-#
-
-#
-# Secondary locations
-#
-BR2_TARGET_ATMEL_COPYTO="/tftpboot"
-BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
-# BR2_TARGET_VALKA is not set
-
-#
-# Generic Architecture support
-#
-
-#
-# Generic System Support
-#
-# BR2_TARGET_GENERIC_ACCESS_POINT is not set
-# BR2_TARGET_GENERIC_FIREWALL is not set
-# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
-
-#
-# Build options
-#
-BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN_CO="svn co"
-BR2_SVN_UP="svn up"
-BR2_GIT="git clone"
-BR2_ZCAT="zcat"
-BR2_BZCAT="bzcat"
-BR2_TAR_OPTIONS=""
-BR2_DL_DIR="$(BASE_DIR)/dl"
-
-#
-# Mirrors and Download locations
-#
-BR2_SOURCEFORGE_MIRROR="easynews"
-BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
-BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
-BR2_DEBIAN_MIRROR="http://ftp.debian.org"
-
-#
-# Atmel Mirrors
-#
-BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/"
-BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
-BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
-# BR2_FPU_SUFFIX is not set
-BR2_TOPDIR_PREFIX=""
-BR2_TOPDIR_SUFFIX=""
-BR2_ROOTFS_PREFIX="rootfs"
-BR2_ROOTFS_SUFFIX="$(DATE)"
-BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
-BR2_GNU_TARGET_SUFFIX="linux-uclibc"
-BR2_JLEVEL=2
-# BR2_PREFER_IMA is not set
-# BR2_DEPRECATED is not set
-BR2_RECENT=y
-# BR2_ENABLE_DEBUG is not set
-BR2_STRIP_strip=y
-# BR2_STRIP_sstrip is not set
-# BR2_STRIP_none is not set
-# BR2_OPTIMIZE_0 is not set
-# BR2_OPTIMIZE_1 is not set
-BR2_OPTIMIZE_2=y
-# BR2_OPTIMIZE_3 is not set
-# BR2_OPTIMIZE_S is not set
-# BR2_PREFER_STATIC_LIB is not set
-# BR2_HAVE_MANPAGES is not set
-# BR2_HAVE_INFOPAGES is not set
-# BR2_HAVE_DEVFILES is not set
-BR2_UPDATE_CONFIG=y
-
-#
-# Toolchain
-#
-# BR2_TOOLCHAIN_BUILDROOT is not set
-# BR2_TOOLCHAIN_EXTERNAL is not set
-BR2_TOOLCHAIN_EXTERNAL_SOURCE=y
-BR2_TOOLCHAIN_SOURCE=y
-# BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2 is not set
-BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1=y
-# BR2_TOOLCHAIN_UNKNOWNVENDOR is not set
-BR2_TOOLCHAIN_ATMEL_AVR32=y
-BR2_VENDOR_SITE="$(BR2_ATMEL_MIRROR)"
-BR2_VENDOR_SUFFIX="-avr32"
-BR2_VENDOR_BINUTILS_RELEASE="-2.1.3"
-BR2_VENDOR_GCC_RELEASE="-2.1.3"
-BR2_VENDOR_UCLIBC_RELEASE="-2.1.3"
-BR2_VENDOR_GDB_RELEASE="-2.1.3"
-BR2_VENDOR_PATCH_DIR="target/device/Atmel/toolchain/avr32"
-# BR2_EXT_GCC_VERSION_4_1_2 is not set
-BR2_EXT_GCC_VERSION_4_2_1=y
-BR2_EXT_BINUTILS_VERSION_2_17=y
-BR2_EXT_UCLIBC_VERSION_0_9_29=y
-# BR2_EXT_UCLIBC_VERSION_0_9_28_3 is not set
-
-#
-# Kernel Header Options
-#
-# BR2_KERNEL_HEADERS_2_4_25 is not set
-# BR2_KERNEL_HEADERS_2_4_27 is not set
-# BR2_KERNEL_HEADERS_2_4_29 is not set
-# BR2_KERNEL_HEADERS_2_4_31 is not set
-# BR2_KERNEL_HEADERS_2_6_9 is not set
-# BR2_KERNEL_HEADERS_2_6_11 is not set
-# BR2_KERNEL_HEADERS_2_6_12 is not set
-# BR2_KERNEL_HEADERS_2_6_20_4 is not set
-# BR2_KERNEL_HEADERS_2_6_20 is not set
-# BR2_KERNEL_HEADERS_2_6_21_5 is not set
-# BR2_KERNEL_HEADERS_2_6_21 is not set
-# BR2_KERNEL_HEADERS_2_6_22_1 is not set
-# BR2_KERNEL_HEADERS_2_6_22_10 is not set
-# BR2_KERNEL_HEADERS_2_6_22 is not set
-# BR2_KERNEL_HEADERS_2_6_23 is not set
-BR2_KERNEL_HEADERS_2_6_24=y
-# BR2_KERNEL_HEADERS_SNAP is not set
-BR2_DEFAULT_KERNEL_HEADERS="2.6.24"
-
-#
-# uClibc Options
-#
-# BR2_UCLIBC_VERSION_0_9_28_3 is not set
-BR2_UCLIBC_VERSION_0_9_29=y
-# BR2_UCLIBC_VERSION_SNAPSHOT is not set
-BR2_UCLIBC_CONFIG="target/device/Atmel/uClibc.config.avr32"
-BR2_ENABLE_LOCALE=y
-# BR2_PTHREADS_NONE is not set
-# BR2_PTHREADS is not set
-BR2_PTHREADS_OLD=y
-# BR2_PTHREADS_NATIVE is not set
-# BR2_PTHREAD_DEBUG is not set
-BR2_UCLIBC_PROGRAM_INVOCATION=y
-
-#
-# Binutils Options
-#
-BR2_BINUTILS_VERSION_2_17=y
-# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
-# BR2_BINUTILS_VERSION_2_18 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
-BR2_BINUTILS_VERSION="2.17"
-BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
-
-#
-# GCC Options
-#
-# BR2_GCC_VERSION_3_4_6 is not set
-# BR2_GCC_VERSION_4_0_4 is not set
-# BR2_GCC_VERSION_4_1_2 is not set
-# BR2_GCC_VERSION_4_2_0 is not set
-BR2_GCC_VERSION_4_2_1=y
-BR2_GCC_SUPPORTS_SYSROOT=y
-# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
-BR2_GCC_VERSION="4.2.1"
-BR2_TOOLCHAIN_SYSROOT=y
-# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
-BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-BR2_GCC_CROSS_CXX=y
-BR2_INSTALL_LIBSTDCPP=y
-BR2_GCC_SHARED_LIBGCC=y
-
-#
-# Ccache Options
-#
-# BR2_CCACHE is not set
-
-#
-# Gdb Options
-#
-# BR2_PACKAGE_GDB is not set
-BR2_PACKAGE_GDB_SERVER=y
-BR2_PACKAGE_GDB_HOST=y
-# BR2_GDB_VERSION_6_2_1 is not set
-# BR2_GDB_VERSION_6_3 is not set
-BR2_GDB_VERSION_6_4=y
-# BR2_GDB_VERSION_6_5 is not set
-# BR2_GDB_VERSION_6_6 is not set
-# BR2_GDB_VERSION_SNAPSHOT is not set
-BR2_GDB_VERSION="6.4"
-
-#
-# elf2flt
-#
-# BR2_ELF2FLT is not set
-# BR2_MKLIBS is not set
-
-#
-# Common Toolchain Options
-#
-# BR2_PACKAGE_SSTRIP_TARGET is not set
-# BR2_PACKAGE_SSTRIP_HOST is not set
-# BR2_ENABLE_MULTILIB is not set
-BR2_LARGEFILE=y
-BR2_INET_IPV6=y
-BR2_INET_RPC=y
-BR2_USE_WCHAR=y
-BR2_SOFT_FLOAT=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"
-BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
-
-#
-# Package Selection for the target
-#
-BR2_PACKAGE_BUSYBOX=y
-# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
-# BR2_BUSYBOX_VERSION_1_6_1 is not set
-# BR2_BUSYBOX_VERSION_1_7_X is not set
-# BR2_BUSYBOX_VERSION_1_8_X is not set
-# BR2_BUSYBOX_VERSION_1_9_X is not set
-BR2_BUSYBOX_VERSION_1_10_X=y
-# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.10.0"
-BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
-BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox-1.6.0.config"
-BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
-BR2_PACKAGE_BUSYBOX_SKELETON=y
-
-#
-# The minimum needed to build a uClibc development system
-#
-BR2_PACKAGE_BASH=y
-BR2_PACKAGE_BZIP2=y
-# BR2_PACKAGE_DIFFUTILS is not set
-# BR2_PACKAGE_FLEX is not set
-# BR2_PACKAGE_GCC_TARGET is not set
-# BR2_PACKAGE_MAKE is not set
-
-#
-# Other development stuff
-#
-# BR2_PACKAGE_AUTOCONF is not set
-# BR2_PACKAGE_AUTOMAKE is not set
-# BR2_PACKAGE_BISON is not set
-# BR2_PACKAGE_CCACHE_TARGET is not set
-# BR2_PACKAGE_CVS is not set
-# BR2_PACKAGE_DISTCC is not set
-# BR2_PACKAGE_DMALLOC is not set
-# BR2_PACKAGE_FAKEROOT is not set
-BR2_HOST_FAKEROOT=y
-# BR2_PACKAGE_GETTEXT is not set
-# BR2_PACKAGE_LIBINTL is not set
-# BR2_PACKAGE_LIBGMP is not set
-# BR2_PACKAGE_LIBMPFR is not set
-# BR2_PACKAGE_LIBTOOL is not set
-# BR2_PACKAGE_M4 is not set
-# BR2_PACKAGE_PKGCONFIG is not set
-# BR2_READLINE is not set
-
-#
-# Other stuff
-#
-# BR2_PACKAGE_AT is not set
-# BR2_PACKAGE_BERKELEYDB is not set
-# BR2_PACKAGE_BSDIFF is not set
-# BR2_PACKAGE_CUPS is not set
-# BR2_PACKAGE_CUSTOMIZE is not set
-# BR2_PACKAGE_DASH is not set
-BR2_PACKAGE_FILE=y
-# BR2_PACKAGE_GAMIN is not set
-# BR2_PACKAGE_ICU is not set
-# BR2_PACKAGE_IPKG is not set
-# BR2_PACKAGE_KEXEC is not set
-BR2_PACKAGE_LIBDAEMON=y
-# BR2_PACKAGE_LIBELF is not set
-# BR2_PACKAGE_LIBEVENT is not set
-# BR2_PACKAGE_LIBFLOAT is not set
-# BR2_PACKAGE_LIBGCRYPT is not set
-# BR2_PACKAGE_LIBGPG_ERROR is not set
-# BR2_PACKAGE_LIBLOCKFILE is not set
-# BR2_PACKAGE_LIBSYSFS is not set
-# BR2_PACKAGE_LOCKFILE_PROGS is not set
-# BR2_PACKAGE_LSOF is not set
-# BR2_PACKAGE_LTP-TESTSUITE is not set
-# BR2_PACKAGE_LTRACE is not set
-# BR2_PACKAGE_LTT is not set
-# BR2_PACKAGE_NG_SPICE_REWORK is not set
-# BR2_PACKAGE_PORTAGE is not set
-# BR2_PACKAGE_SQLITE is not set
-# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
-BR2_PACKAGE_STRACE=y
-# BR2_PACKAGE_SUDO is not set
-BR2_NETWORK_SUPPORT=y
-
-#
-# Networking applications
-#
-
-#
-# argus - disabled (requires libpcap)
-#
-BR2_PACKAGE_AVAHI=y
-BR2_PACKAGE_AVAHI_AUTOIPD=y
-
-#
-# mDNS/DNS-SD daemon - disabled (requires expat)
-#
-# BR2_PACKAGE_BOA is not set
-# BR2_PACKAGE_BIND is not set
-# BR2_PACKAGE_BRIDGE is not set
-# BR2_PACKAGE_CURL is not set
-# BR2_PACKAGE_LIBCURL is not set
-# BR2_PACKAGE_DNSMASQ is not set
-BR2_PACKAGE_DROPBEAR=y
-# BR2_PACKAGE_ETHTOOL is not set
-BR2_PACKAGE_HASERL=y
-# BR2_PACKAGE_HASERL_VERSION_0_8_0 is not set
-BR2_PACKAGE_HASERL_VERSION_0_9_22=y
-BR2_PACKAGE_HASERL_VERSION="0.9.22"
-# BR2_PACKAGE_IRDA_UTILS is not set
-# BR2_PACKAGE_IPERF is not set
-# BR2_PACKAGE_IPROUTE2 is not set
-
-#
-# ipsec-tools - disabled (requires openssl, flex and the flex library (libfl.a) )
-#
-# BR2_PACKAGE_IPTABLES is not set
-# BR2_PACKAGE_KISMET is not set
-# BR2_PACKAGE_L2TP is not set
-# BR2_PACKAGE_LIBCGI is not set
-# BR2_PACKAGE_LIBCGICC is not set
-# BR2_PACKAGE_LIBEXOSIP2 is not set
-# BR2_PACKAGE_LIBOSIP2 is not set
-# BR2_PACKAGE_LIBPCAP is not set
-# BR2_PACKAGE_LINKS is not set
-BR2_PACKAGE_LRZSZ=y
-# BR2_PACKAGE_MDNSRESPONDER is not set
-BR2_PACKAGE_MICROCOM=y
-# BR2_PACKAGE_MROUTED is not set
-# BR2_PACKAGE_MUTT is not set
-BR2_PACKAGE_NBD=y
-BR2_PACKAGE_NCFTP=y
-
-#
-# ncFTP tools selection
-#
-# BR2_PACKAGE_NCFTP_GET is not set
-# BR2_PACKAGE_NCFTP_PUT is not set
-# BR2_PACKAGE_NCFTP_LS is not set
-# BR2_PACKAGE_NCFTP_BATCH is not set
-# BR2_PACKAGE_NCFTP_SPOOLER is not set
-# BR2_PACKAGE_NCFTP_BOOKMARKS is not set
-# BR2_PACKAGE_NETKITBASE is not set
-# BR2_PACKAGE_NETKITTELNET is not set
-# BR2_PACKAGE_NETPLUG is not set
-# BR2_PACKAGE_NETSNMP is not set
-# BR2_PACKAGE_NFS_UTILS is not set
-BR2_PACKAGE_NTP=y
-# BR2_PACKAGE_NTP_SNTP is not set
-# BR2_PACKAGE_OLSR is not set
-# BR2_PACKAGE_OPENNTPD is not set
-# BR2_PACKAGE_OPENSSH is not set
-# BR2_PACKAGE_OPENSSL is not set
-# BR2_PACKAGE_OPENVPN is not set
-# BR2_PACKAGE_OPENSWAN is not set
-BR2_PACKAGE_PORTMAP=y
-# BR2_PACKAGE_PPPD is not set
-# BR2_PACKAGE_RP_PPPOE is not set
-# BR2_PACKAGE_PPTP_LINUX is not set
-BR2_PACKAGE_PROFTPD=y
-# BR2_PACKAGE_QUAGGA is not set
-
-#
-# quagga suite
-#
-# BR2_PACKAGE_QUAGGA_ZEBRA is not set
-# BR2_PACKAGE_QUAGGA_BGPD is not set
-# BR2_PACKAGE_QUAGGA_RIPD is not set
-# BR2_PACKAGE_QUAGGA_RIPNGD is not set
-# BR2_PACKAGE_QUAGGA_OSPFD is not set
-# BR2_PACKAGE_QUAGGA_OSPF6D is not set
-# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
-# BR2_PACKAGE_QUAGGA_ISISD is not set
-BR2_PACKAGE_RSYNC=y
-# BR2_PACKAGE_SAMBA is not set
-# BR2_PACKAGE_SOCAT is not set
-# BR2_PACKAGE_STUNNEL is not set
-# BR2_PACKAGE_TCPDUMP is not set
-# BR2_PACKAGE_DHCPDUMP is not set
-# BR2_PACKAGE_TFTPD is not set
-# BR2_PACKAGE_TN5250 is not set
-# BR2_PACKAGE_TTCP is not set
-# BR2_PACKAGE_UDPCAST is not set
-
-#
-# vpnc - disabled (requires libgcrypt and libgpg_error)
-#
-# BR2_PACKAGE_VTUN is not set
-BR2_PACKAGE_WIRELESS_TOOLS=y
-BR2_BLOCKDEV_SUPPORT=y
-
-#
-# dbus not available (need expat or libxml2)
-#
-# BR2_PACKAGE_DM is not set
-# BR2_PACKAGE_DMRAID is not set
-# BR2_PACKAGE_E2FSPROGS is not set
-# BR2_PACKAGE_FCONFIG is not set
-# BR2_PACKAGE_FIS is not set
-# BR2_PACKAGE_LIBFUSE is not set
-# BR2_PACKAGE_GADGETFS_TEST is not set
-# BR2_PACKAGE_HAL is not set
-# BR2_PACKAGE_HWDATA is not set
-# BR2_PACKAGE_IOSTAT is not set
-# BR2_PACKAGE_LIBAIO is not set
-# BR2_PACKAGE_LIBRAW1394 is not set
-# BR2_PACKAGE_LIBUSB is not set
-# BR2_PACKAGE_LM_SENSORS is not set
-# BR2_PACKAGE_LVM2 is not set
-# BR2_PACKAGE_MDADM is not set
-# BR2_PACKAGE_MEMTESTER is not set
-# BR2_PACKAGE_MKDOSFS is not set
-BR2_PACKAGE_MTD=y
-BR2_PACKAGE_MTD_UTILS=y
-# BR2_PACKAGE_MTD_20061007 is not set
-# BR2_PACKAGE_MTD_20050122 is not set
-# BR2_PACKAGE_MTD_UTILS_GIT is not set
-
-#
-# MTD tools selection
-#
-# BR2_PACKAGE_MTD_DOCFDISK is not set
-# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
-BR2_PACKAGE_MTD_FLASHCP=y
-BR2_PACKAGE_MTD_FLASH_ERASE=y
-BR2_PACKAGE_MTD_FLASH_ERASEALL=y
-BR2_PACKAGE_MTD_FLASH_INFO=y
-# BR2_PACKAGE_MTD_FLASH_LOCK is not set
-# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
-# BR2_PACKAGE_MTD_FTL_CHECK is not set
-# BR2_PACKAGE_MTD_FTL_FORMAT is not set
-# BR2_PACKAGE_MTD_JFFS2DUMP is not set
-# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
-# BR2_PACKAGE_MTD_MKFSJFFS is not set
-BR2_PACKAGE_MTD_MTD_DEBUG=y
-# BR2_PACKAGE_MTD_NANDDUMP is not set
-# BR2_PACKAGE_MTD_NANDWRITE is not set
-# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
-# BR2_PACKAGE_MTD_NFTLDUMP is not set
-# BR2_PACKAGE_MTD_SUMTOOL is not set
-# BR2_PACKAGE_NTFS-3G is not set
-# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_PCMCIA is not set
-# BR2_PACKAGE_RAIDTOOLS is not set
-# BR2_PACKAGE_SETSERIAL is not set
-# BR2_PACKAGE_SMARTMONTOOLS is not set
-# BR2_PACKAGE_USBMOUNT is not set
-# BR2_PACKAGE_USBUTILS is not set
-# BR2_PACKAGE_WIPE is not set
-# BR2_PACKAGE_XFSPROGS is not set
-BR2_AUDIO_SUPPORT=y
-BR2_PACKAGE_ALSA_LIB=y
-BR2_PACKAGE_ALSA_UTILS=y
-
-#
-# ALSA utils selection
-#
-# BR2_PACKAGE_ALSA_UTILS_ALSACONF is not set
-BR2_PACKAGE_ALSA_UTILS_ALSACTL=y
-BR2_PACKAGE_ALSA_UTILS_ALSAMIXER=y
-# BR2_PACKAGE_ALSA_UTILS_AMIDI is not set
-# BR2_PACKAGE_ALSA_UTILS_AMIXER is not set
-# BR2_PACKAGE_ALSA_UTILS_APLAY is not set
-# BR2_PACKAGE_ALSA_UTILS_ARECORD is not set
-# BR2_PACKAGE_ALSA_UTILS_IECSET is not set
-# BR2_PACKAGE_ALSA_UTILS_ACONNECT is not set
-# BR2_PACKAGE_ALSA_UTILS_APLAYMIDI is not set
-# BR2_PACKAGE_ALSA_UTILS_ARECORDMIDI is not set
-# BR2_PACKAGE_ALSA_UTILS_ASEQDUMP is not set
-# BR2_PACKAGE_ALSA_UTILS_ASEQNET is not set
-# BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST is not set
-
-#
-# asterisk - disabled (required openssl and mpg123)
-#
-# BR2_PACKAGE_AUMIX is not set
-# BR2_PACKAGE_LIBID3TAG is not set
-BR2_PACKAGE_LIBMAD=y
-# BR2_PACKAGE_LIBMAD_TARGET_HEADERS is not set
-# BR2_PACKAGE_LIBOGG is not set
-# BR2_PACKAGE_LIBSNDFILE is not set
-
-#
-# libvorbis requires the package libogg to build
-#
-# BR2_PACKAGE_MADPLAY is not set
-# BR2_PACKAGE_MPG123 is not set
-BR2_PACKAGE_MPG123_ALSA=y
-# BR2_PACKAGE_SPEEX is not set
-BR2_GRAPHIC_SUPPORT=y
-
-#
-# text rendering libraries
-#
-BR2_PACKAGE_NCURSES=y
-# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
-# BR2_PACKAGE_NEWT is not set
-# BR2_PACKAGE_SLANG is not set
-
-#
-# text rendering applications
-#
-# BR2_PACKAGE_DIALOG is not set
-
-#
-# graphic libraries
-#
-# BR2_PACKAGE_DIRECTFB is not set
-# BR2_PACKAGE_IMAGEMAGICK is not set
-BR2_PACKAGE_JPEG=y
-BR2_PACKAGE_LIBPNG=y
-BR2_PACKAGE_LIBUNGIF=y
-# BR2_PACKAGE_SDL is not set
-# BR2_PACKAGE_SDL_MIXER is not set
-# BR2_PACKAGE_SDL_TTF is not set
-# BR2_PACKAGE_TIFF is not set
-
-#
-# busybox graphic applications
-#
-
-#
-# --> (May be broken in busybox)
-#
-BR2_PACKAGE_FBV=y
-BR2_PACKAGE_FBSET=y
-
-#
-# other GUIs
-#
-# BR2_PACKAGE_QTE is not set
-BR2_PACKAGE_QTOPIA4=y
-# BR2_PACKAGE_QTOPIA4_DEBUG is not set
-BR2_PACKAGE_QTOPIA4_SHARED=y
-# BR2_PACKAGE_QTOPIA4_STATIC is not set
-BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL=y
-# BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL is not set
-BR2_PACKAGE_QTOPIA4_GPL_LICENSE_APPROVED=y
-# BR2_PACKAGE_QTOPIA4_QT3SUPPORT is not set
-BR2_PACKAGE_QTOPIA4_GIF=y
-BR2_PACKAGE_QTOPIA4_LIBMNG=y
-BR2_PACKAGE_QTOPIA4_NOJPEG=y
-# BR2_PACKAGE_QTOPIA4_SYSTEMJPEG is not set
-# BR2_PACKAGE_QTOPIA4_QTJPEG is not set
-BR2_PACKAGE_QTOPIA4_NOPNG=y
-# BR2_PACKAGE_QTOPIA4_SYSTEMPNG is not set
-# BR2_PACKAGE_QTOPIA4_QTPNG is not set
-BR2_PACKAGE_QTOPIA4_NOTIFF=y
-# BR2_PACKAGE_QTOPIA4_SYSTEMTIFF is not set
-# BR2_PACKAGE_QTOPIA4_QTTIFF is not set
-# BR2_PACKAGE_QTOPIA4_SQL is not set
-# BR2_PACKAGE_QTOPIA4_OPENSSL is not set
-# BR2_PACKAGE_QTOPIA4_NOZLIB is not set
-BR2_PACKAGE_QTOPIA4_QTZLIB=y
-# BR2_PACKAGE_QTOPIA4_SYSTEMZLIB is not set
-BR2_PACKAGE_QTOPIA4_EMB_PLATFORM="$(ARCH)"
-BR2_PACKAGE_XSERVER_none=y
-# BR2_PACKAGE_XSERVER_x11r7 is not set
-# BR2_PACKAGE_XSERVER_xorg is not set
-# BR2_PACKAGE_XSERVER_tinyx is not set
-BR2_X11_PREFIX="/usr"
-
-#
-# X libraries and helper libraries
-#
-
-#
-# atk - disabled (requires libglib2)
-#
-# BR2_PACKAGE_PANGO is not set
-# BR2_PACKAGE_LIBDRM is not set
-# BR2_PACKAGE_LIBGLIB12 is not set
-# BR2_PACKAGE_LIBGLIB2 is not set
-# BR2_PACKAGE_LIBSEXY is not set
-
-#
-# fltk - disabled (requires Xorg(7))
-#
-# BR2_PACKAGE_OPENMOTIF is not set
-# BR2_PACKAGE_FONTCONFIG is not set
-# BR2_PACKAGE_FREETYPE is not set
-# BR2_PACKAGE_TSLIB is not set
-# BR2_PACKAGE_WEBKIT is not set
-
-#
-# X Window managers
-#
-# BR2_PACKAGE_MATCHBOX is not set
-
-#
-# blackbox - disabled (requires Xorg(7))
-#
-
-#
-# X applications
-#
-# BR2_PACKAGE_ALSAMIXERGUI is not set
-
-#
-# dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
-#
-# BR2_PACKAGE_DOCKER is not set
-# BR2_PACKAGE_GQVIEW is not set
-# BR2_PACKAGE_LEAFPAD is not set
-
-#
-# midori - disabled (requires Xorg(7))
-#
-# BR2_PACKAGE_PCMANFM is not set
-# BR2_PACKAGE_SYLPHEED is not set
-# BR2_PACKAGE_TORSMO is not set
-# BR2_PACKAGE_X11VNC is not set
-# BR2_PACKAGE_XPDF is not set
-# BR2_PACKAGE_XSTROKE is not set
-# BR2_PACKAGE_XVKBD is not set
-
-#
-# Video libraries/codecs and applications
-#
-BR2_PACKAGE_MPLAYER=y
-BR2_COMPRESSOR_SUPPORT=y
-BR2_PACKAGE_LZO=y
-# BR2_PACKAGE_LZMA_TARGET is not set
-# BR2_PACKAGE_LZMA_HOST is not set
-BR2_PACKAGE_ZLIB=y
-# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
-# BR2_SCRIPTING_SUPPORT is not set
-BR2_XML_SUPPORT=y
-# BR2_PACKAGE_EXPAT is not set
-# BR2_PACKAGE_EZXML is not set
-# BR2_PACKAGE_LIBXML2 is not set
-
-#
-# libxslt - disabled (requires pkgconfig)
-#
-# BR2_PACKAGE_XERCES is not set
-BR2_JAVA_SUPPORT=y
-# BR2_PACKAGE_CLASSPATH is not set
-# BR2_GAMES is not set
-
-#
-# Target filesystem options
-#
-
-#
-# filesystem for target device
-#
-# BR2_TARGET_ROOTFS_CRAMFS is not set
-# BR2_TARGET_ROOTFS_CLOOP is not set
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
-BR2_TARGET_ROOTFS_EXT2_INODES=0
-BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
-BR2_TARGET_ROOTFS_EXT2_SQUASH=y
-BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
-# BR2_TARGET_ROOTFS_EXT2_NONE is not set
-# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
-BR2_TARGET_ROOTFS_EXT2_BZIP2=y
-# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
-BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
-# BR2_TARGET_ROOTFS_JFFS2 is not set
-# BR2_TARGET_ROOTFS_SQUASHFS is not set
-BR2_TARGET_ROOTFS_TAR=y
-BR2_TARGET_ROOTFS_TAR_NONE=y
-# BR2_TARGET_ROOTFS_TAR_GZIP is not set
-# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
-# BR2_TARGET_ROOTFS_TAR_LZMA is not set
-BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-BR2_TARGET_ROOTFS_TAR_COPYTO=""
-# BR2_TARGET_ROOTFS_CPIO is not set
-# BR2_TARGET_ROOTFS_INITRAMFS is not set
-
-#
-# bootloader for target device
-#
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="$(BOARD_NAME)"
-BR2_TARGET_UBOOT_CUSTOM_PATCH=""
-BR2_TARGET_UBOOT_SERVERIP="10.175.196.221"
-BR2_TARGET_UBOOT_IPADDR="10.175.196.18"
-BR2_TARGET_UBOOT_GATEWAY="10.175.196.1"
-BR2_TARGET_UBOOT_NETMASK="255.255.255.0"
-BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18"
-BR2_TARGET_UBOOT_ETH1ADDR=""
-# BR2_TARGET_UBOOT_SILENT is not set
-
-#
-# Kernel
-#
-# BR2_KERNEL_none is not set
-BR2_KERNEL_LINUX_ADVANCED=y
-# BR2_KERNEL_LINUX is not set
-# BR2_KERNEL_HURD is not set
-BR2_PACKAGE_LINUX=y
-BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.24.config"
-BR2_PACKAGE_LINUX_FORMAT="uImage"
-BR2_KERNEL_PATCH_LEVEL="$(BR2_KERNEL_MINORLEVEL)"
-BR2_KERNEL_CURRENT_VERSION="2.6.24.4"
-BR2_KERNEL_NEXT_VERSION="2.6.25"
-BR2_KERNEL_THIS_VERSION="2.6.24"
-BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
-BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
-BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
-BR2_KERNEL_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
-# BR2_LINUX_2_6_STABLE is not set
-BR2_LINUX_2_6_24=y
-# BR2_LINUX_2_6_23 is not set
-# BR2_LINUX_2_6_22_10 is not set
-# BR2_LINUX_2_6_22_1 is not set
-# BR2_LINUX_2_6_22 is not set
-# BR2_LINUX_2_6_21_7 is not set
-# BR2_LINUX_2_6_21_5 is not set
-# BR2_LINUX_2_6_21 is not set
-# BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_25 is not set
-# BR2_LINUX26_CUSTOM is not set
-
-#
-# Patches
-#
-BR2_KERNEL_ADD_KERNEL_ORG_PATCH=y
-# BR2_KERNEL_ADD_LATEST is not set
-# BR2_KERNEL_ADD_LATEST_MINORPATCH is not set
-BR2_KERNEL_ADD_MINORPATCH=y
-# BR2_KERNEL_ADD_LATEST_RC_PATCH is not set
-# BR2_KERNEL_ADD_RC_PATCH is not set
-# BR2_KERNEL_ADD_LATEST_SNAPSHOT is not set
-# BR2_KERNEL_ADD_SNAPSHOT is not set
-# BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
-# BR2_KERNEL_ADD_MM_PATCH is not set
-BR2_KERNEL_ADD_PATCH=y
-BR2_KERNEL_MINORLEVEL="3"
-BR2_KERNEL_ARCH_PATCH_ENABLED=y
-BR2_KERNEL_ARCH_PATCH_VERSION="2.6.24"
-BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
-BR2_ARCH_AVR32_2_6_24=y
-# BR2_ARCH_AVR32_2_6_23 is not set
-# BR2_ARCH_AVR32_2_6_22_10 is not set
-# BR2_ARCH_AVR32_2_6_22_1 is not set
-# BR2_ARCH_AVR32_2_6_21_5 is not set
-# BR2_ARCH_AVR32_2_6_20_4 is not set
-# BR2_LINUX_AVR32_ISI_PATCH is not set
-# BR2_LINUX_AVR32_AC97_PATCH is not set
-# BR2_LINUX_AVR32_PSIF_PATCH is not set
-BR2_LINUX_BOARD_PATCH=y
-BR2_LINUX_BSP_PATCH=""
-BR2_KERNEL_PATCH="patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2"
-# BR2_KERNEL_PREPATCHED is not set
-BR2_KERNEL_BASE=y
-# BR2_KERNEL_LATEST is not set
-BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
-BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)"
-
-#
-# Linux Kernel Configuration
-#
-BR2_PACKAGE_LINUX_USE_KCONFIG=y
-# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
-# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
-# BR2_LINUX_BIN_BZIMAGE is not set
-BR2_LINUX_BIN_UIMAGE=y
-# BR2_LINUX_BIN_VMLINUX is not set
-# BR2_LINUX_BIN_ZIMAGE is not set
-# BR2_LINUX_BIN_CUSTOM is not set
-
-#
-# Destinations for linux kernel binaries
-#
-BR2_LINUX_COPYTO_ROOTFS=y
-BR2_LINUX_COPYTO_TFTPBOOT=y
-BR2_LINUX_COPYTO=""
-# BR2_LINUX_COPY_CONFIGURATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.8.2
-# Sun Dec 23 12:11:59 2007
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-# CONFIG_NITPICK is not set
-# CONFIG_DESKTOP is not set
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_COMPRESS_USAGE is not set
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_GETOPT_LONG=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_PIDFILE is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
-CONFIG_FEATURE_SYSLOG=y
-CONFIG_FEATURE_HAVE_RPC=y
-
-#
-# Build Options
-#
-CONFIG_STATIC=y
-CONFIG_BUILD_LIBBUSYBOX=y
-# CONFIG_FEATURE_INDIVIDUAL is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-CONFIG_LFS=y
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-CONFIG_INCLUDE_SUSv2=y
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
-# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
-# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
-CONFIG_PREFIX="/usr/avr32-linux"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
-CONFIG_FEATURE_FAST_TOP=y
-# CONFIG_FEATURE_ETC_NETWORKS is not set
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_MAX_LEN=1024
-CONFIG_FEATURE_EDITING_FANCY_KEYS=y
-# CONFIG_FEATURE_EDITING_VI is not set
-CONFIG_FEATURE_EDITING_HISTORY=100
-CONFIG_FEATURE_EDITING_SAVEHISTORY=y
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-CONFIG_MONOTONIC_SYSCALL=y
-CONFIG_IOCTL_HEX2STR_ERROR=y
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_AR=y
-CONFIG_FEATURE_AR_LONG_FILENAMES=y
-CONFIG_BUNZIP2=y
-CONFIG_BZIP2=y
-CONFIG_CPIO=y
-CONFIG_DPKG=y
-CONFIG_DPKG_DEB=y
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
-CONFIG_GZIP=y
-CONFIG_RPM2CPIO=y
-CONFIG_RPM=y
-CONFIG_FEATURE_RPM_BZ2=y
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-CONFIG_FEATURE_TAR_LZMA=y
-CONFIG_FEATURE_TAR_FROM=y
-CONFIG_FEATURE_TAR_GZIP=y
-CONFIG_FEATURE_TAR_COMPRESS=y
-CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-CONFIG_FEATURE_TAR_LONG_OPTIONS=y
-CONFIG_UNCOMPRESS=y
-CONFIG_UNLZMA=y
-CONFIG_FEATURE_LZMA_FAST=y
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Common options for dpkg and dpkg_deb
-#
-CONFIG_FEATURE_DEB_TAR_GZ=y
-CONFIG_FEATURE_DEB_TAR_BZ2=y
-CONFIG_FEATURE_DEB_TAR_LZMA=y
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-CONFIG_CAL=y
-CONFIG_CAT=y
-CONFIG_CATV=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CKSUM=y
-CONFIG_COMM=y
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_FEATURE_ENV_LONG_OPTIONS=y
-CONFIG_EXPAND=y
-CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-CONFIG_FOLD=y
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-CONFIG_MKFIFO=y
-CONFIG_MKNOD=y
-CONFIG_MV=y
-CONFIG_FEATURE_MV_LONG_OPTIONS=y
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-CONFIG_OD=y
-CONFIG_PRINTENV=y
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_REALPATH=y
-CONFIG_RM=y
-CONFIG_RMDIR=y
-CONFIG_SEQ=y
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-CONFIG_SPLIT=y
-CONFIG_FEATURE_SPLIT_FANCY=y
-CONFIG_STAT=y
-CONFIG_FEATURE_STAT_FORMAT=y
-CONFIG_STTY=y
-CONFIG_SUM=y
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNEXPAND=y
-CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-CONFIG_WC=y
-CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-CONFIG_DUMPKMAP=y
-CONFIG_KBD_MODE=y
-CONFIG_LOADFONT=y
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-CONFIG_RESIZE=y
-CONFIG_FEATURE_RESIZE_PRINT=y
-CONFIG_SETCONSOLE=y
-CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
-CONFIG_SETKEYCODES=y
-CONFIG_SETLOGCONS=y
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
-CONFIG_START_STOP_DAEMON=y
-CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
-CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_MATH=y
-CONFIG_CMP=y
-CONFIG_DIFF=y
-CONFIG_FEATURE_DIFF_BINARY=y
-CONFIG_FEATURE_DIFF_DIR=y
-CONFIG_FEATURE_DIFF_MINIMAL=y
-CONFIG_ED=y
-CONFIG_PATCH=y
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_MAX_LEN=1024
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-CONFIG_FEATURE_ALLOW_EXEC=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_MMIN=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-CONFIG_FEATURE_FIND_MAXDEPTH=y
-CONFIG_FEATURE_FIND_NEWER=y
-CONFIG_FEATURE_FIND_INUM=y
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-CONFIG_FEATURE_FIND_DELETE=y
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_FEATURE_FIND_REGEX=y
-# CONFIG_FEATURE_FIND_CONTEXT is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-# CONFIG_DEBUG_INIT is not set
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INIT_SCTTY=y
-CONFIG_FEATURE_INIT_SYSLOG=y
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_INITRD=y
-CONFIG_HALT=y
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_SHADOW is not set
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_FEATURE_ADDUSER_TO_GROUP=y
-CONFIG_DELGROUP=y
-CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-CONFIG_FEATURE_UTMP=y
-CONFIG_FEATURE_WTMP=y
-CONFIG_LOGIN=y
-# CONFIG_PAM is not set
-CONFIG_LOGIN_SCRIPTS=y
-CONFIG_FEATURE_NOLOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-# CONFIG_CRYPTPW is not set
-# CONFIG_CHPASSWD is not set
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Linux Ext2 FS Progs
-#
-CONFIG_CHATTR=y
-CONFIG_FSCK=y
-CONFIG_LSATTR=y
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-CONFIG_FEATURE_INSMOD_LOAD_MAP=y
-CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
-CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-# CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_FEATURE_2_6_MODULES=y
-# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-CONFIG_FDFLUSH=y
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_FEATURE_MINIX2 is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
-# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
-CONFIG_IPCRM=y
-CONFIG_IPCS=y
-CONFIG_LOSETUP=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MKSWAP=y
-# CONFIG_FEATURE_MKSWAP_V0 is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_MOUNT=y
-CONFIG_FEATURE_MOUNT_HELPERS=y
-CONFIG_FEATURE_MOUNT_NFS=y
-CONFIG_FEATURE_MOUNT_CIFS=y
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_READPROFILE=y
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-CONFIG_FEATURE_MTAB_SUPPORT=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-CONFIG_BBCONFIG=y
-CONFIG_CHRT=y
-CONFIG_CROND=y
-CONFIG_DEBUG_CROND_OPTION=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_CRONTAB=y
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-# CONFIG_EJECT is not set
-CONFIG_LAST=y
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_FLAGCS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-CONFIG_HDPARM=y
-CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
-CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
-CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
-CONFIG_MAKEDEVS=y
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-CONFIG_FEATURE_MAKEDEVS_TABLE=y
-CONFIG_MICROCOM=y
-CONFIG_MOUNTPOINT=y
-CONFIG_MT=y
-# CONFIG_RAIDAUTORUN is not set
-# CONFIG_READAHEAD is not set
-CONFIG_RUNLEVEL=y
-CONFIG_RX=y
-CONFIG_STRINGS=y
-CONFIG_SETSID=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
-CONFIG_TIME=y
-CONFIG_TTYSIZE=y
-CONFIG_WATCHDOG=y
-
-#
-# Networking Utilities
-#
-CONFIG_FEATURE_IPV6=y
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-CONFIG_ARPING=y
-CONFIG_DNSD=y
-CONFIG_ETHER_WAKE=y
-# CONFIG_FAKEIDENTD is not set
-CONFIG_FTPGET=y
-CONFIG_FTPPUT=y
-CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
-CONFIG_HOSTNAME=y
-CONFIG_HTTPD=y
-CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
-CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
-CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-CONFIG_FEATURE_IFCONFIG_HW=y
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-CONFIG_FEATURE_IFUPDOWN_IPV6=y
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
-CONFIG_INETD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
-CONFIG_FEATURE_INETD_RPC=y
-# CONFIG_IP is not set
-# CONFIG_FEATURE_IP_ADDRESS is not set
-# CONFIG_FEATURE_IP_LINK is not set
-# CONFIG_FEATURE_IP_ROUTE is not set
-# CONFIG_FEATURE_IP_TUNNEL is not set
-# CONFIG_FEATURE_IP_RULE is not set
-# CONFIG_FEATURE_IP_SHORT_FORMS is not set
-# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_IPRULE is not set
-# CONFIG_IPCALC is not set
-# CONFIG_FEATURE_IPCALC_FANCY is not set
-# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NC_SERVER is not set
-# CONFIG_NC_EXTRA is not set
-CONFIG_NETSTAT=y
-CONFIG_FEATURE_NETSTAT_WIDE=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_PSCAN=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-# CONFIG_SLATTACH is not set
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-CONFIG_FEATURE_TELNET_AUTOLOGIN=y
-CONFIG_TELNETD=y
-CONFIG_FEATURE_TELNETD_STANDALONE=y
-CONFIG_TFTP=y
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-CONFIG_FEATURE_TFTP_BLOCKSIZE=y
-# CONFIG_DEBUG_TFTP is not set
-CONFIG_TRACEROUTE=y
-CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-CONFIG_APP_UDHCPD=y
-# CONFIG_APP_DHCPRELAY is not set
-# CONFIG_APP_DUMPLEASES is not set
-# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
-CONFIG_APP_UDHCPC=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_FEATURE_RFC3397 is not set
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_FUSER=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_NMETER=y
-CONFIG_PGREP=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PKILL=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOPMEM=y
-CONFIG_UPTIME=y
-CONFIG_WATCH=y
-
-#
-# Shells
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_READ_NCHARS=y
-CONFIG_ASH_READ_TIMEOUT=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_TEST=y
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-CONFIG_ASH_EXPAND_PRMT=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_CTTYHACK is not set
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
-# CONFIG_LOGREAD is not set
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Runit Utilities
-#
-# CONFIG_RUNSV is not set
-# CONFIG_RUNSVDIR is not set
-# CONFIG_SV is not set
-# CONFIG_SVLOGD is not set
-# CONFIG_CHPST is not set
-# CONFIG_SETUIDGID is not set
-# CONFIG_ENVUIDGID is not set
-# CONFIG_ENVDIR is not set
-# CONFIG_SOFTLIMIT is not set
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RESTORECON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-# CONFIG_SETFILES is not set
-# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
-# CONFIG_SETSEBOOL is not set
-
-#
-# ipsvd utilities
-#
-# CONFIG_TCPSVD is not set
-# CONFIG_UDPSVD is not set
+++ /dev/null
-# When building a target filesystem, it is desirable to not have to become
-# root and then run 'mknod' a thousand times. Using a device table you can
-# create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs. You can do all
-# sorts of interesting things with a device table file. For example, if you
-# want to adjust the permissions on a particular file you can just add an
-# entry like:
-# /sbin/foobar f 2755 0 0 - - - - -
-# and (assuming the file /sbin/foobar exists) it will be made setuid root
-# (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] I
-# could just use the following two table entries:
-# /dev/hda b 640 0 0 3 0 0 0 -
-# /dev/hda b 640 0 0 3 1 1 1 15
-#
-# Device table entries take the form of:
-# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-# where name is the file name, type can be one of:
-# f A regular file
-# d Directory
-# c Character special device file
-# b Block special device file
-# p Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the target
-# file. The rest of the entries (major, minor, etc) apply only to device
-# special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/dev d 755 0 0 - - - - -
-#/dev/pts d 755 0 0 - - - - -
-#/dev/shm d 755 0 0 - - - - -
-/tmp d 1777 0 0 - - - - -
-/etc d 755 0 0 - - - - -
-/sys d 755 0 0 - - - - -
-/config d 755 0 0 - - - - -
-/proc d 755 0 0 - - - - -
-/lost+found d 700 0 0 - - - - -
-/var/lock d 1777 0 0 - - - - -
-/var/log d 755 0 0 - - - - -
-/var/run d 1777 0 0 - - - - -
-/var/tmp d 1777 0 0 - - - - -
-/home/avr32 d 2755 500 500 - - - - -
-/home/default d 2755 1000 1000 - - - - -
-/media d 755 0 0 - - - - -
-/www d 755 0 0 - - - - -
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/bin/busybox f 4755 0 0 - - - - -
-#/etc/shadow f 600 0 0 - - - - -
-/etc/passwd f 644 0 0 - - - - -
-/etc/network/if-up.d d 755 0 0 - - - - -
-/etc/network/if-pre-up.d d 755 0 0 - - - - -
-/etc/network/if-down.d d 755 0 0 - - - - -
-/etc/network/if-post-down.d d 755 0 0 - - - - -
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
-# Normal system devices
-#/dev/mem c 640 0 0 1 1 0 0 -
-#/dev/kmem c 640 0 0 1 2 0 0 -
-/dev/null c 666 0 0 1 3 0 0 -
-#/dev/zero c 666 0 0 1 5 0 0 -
-#/dev/random c 666 0 0 1 8 0 0 -
-#/dev/urandom c 666 0 0 1 9 0 0 -
-#/dev/ram b 640 0 0 1 1 0 0 -
-#/dev/ram b 640 0 0 1 0 0 1 4
-#/dev/loop b 640 0 0 7 0 0 1 2
-#/dev/rtc c 640 0 0 10 135 - - -
-/dev/console c 666 0 0 5 1 - - -
-#/dev/tty c 666 0 0 5 0 - - -
-#/dev/tty c 666 0 0 4 0 0 1 8
-#/dev/ttyp c 666 0 0 3 0 0 1 10
-#/dev/ptyp c 666 0 0 2 0 0 1 10
-#/dev/ptmx c 666 0 0 5 2 - - -
-#/dev/ttyP c 666 0 0 57 0 0 1 4
-#/dev/ttyS c 666 0 0 4 64 0 1 4
-#/dev/fb c 640 0 5 29 0 0 32 4
-#/dev/ttySA c 666 0 0 204 5 0 1 3
-#/dev/psaux c 666 0 0 10 1 0 0 -
-#/dev/ppp c 666 0 0 108 0 - - -
-
-# Input stuff
-#/dev/input d 755 0 0 - - - - -
-#/dev/input/mice c 640 0 0 13 63 0 0 -
-#/dev/input/mouse c 660 0 0 13 32 0 1 4
-#/dev/input/event c 660 0 0 13 64 0 1 4
-#/dev/input/js c 660 0 0 13 0 0 1 4
-
-
-# MTD stuff
-#/dev/mtd c 640 0 0 90 0 0 2 4
-#/dev/mtdblock b 640 0 0 31 0 0 1 4
-
-#Tun/tap driver
-#/dev/net d 755 0 0 - - - - -
-#/dev/net/tun c 660 0 0 10 200 - - -
-
-# Audio stuff
-#/dev/audio c 666 0 29 14 4 - - -
-#/dev/audio1 c 666 0 29 14 20 - - -
-#/dev/dsp c 666 0 29 14 3 - - -
-#/dev/dsp1 c 666 0 29 14 19 - - -
-#/dev/sndstat c 666 0 29 14 6 - - -
-
-# User-mode Linux stuff
-#/dev/ubda b 640 0 0 98 0 0 0 -
-#/dev/ubda b 640 0 0 98 1 1 1 15
-
-# IDE Devices
-#/dev/hda b 640 0 0 3 0 0 0 -
-#/dev/hda b 640 0 0 3 1 1 1 15
-#/dev/hdb b 640 0 0 3 64 0 0 -
-#/dev/hdb b 640 0 0 3 65 1 1 15
-#/dev/hdc b 640 0 0 22 0 0 0 -
-#/dev/hdc b 640 0 0 22 1 1 1 15
-#/dev/hdd b 640 0 0 22 64 0 0 -
-#/dev/hdd b 640 0 0 22 65 1 1 15
-#/dev/hde b 640 0 0 33 0 0 0 -
-#/dev/hde b 640 0 0 33 1 1 1 15
-#/dev/hdf b 640 0 0 33 64 0 0 -
-#/dev/hdf b 640 0 0 33 65 1 1 15
-#/dev/hdg b 640 0 0 34 0 0 0 -
-#/dev/hdg b 640 0 0 34 1 1 1 15
-#/dev/hdh b 640 0 0 34 64 0 0 -
-#/dev/hdh b 640 0 0 34 65 1 1 15
-
-# SCSI Devices
-#/dev/sda b 640 0 0 8 0 0 0 -
-#/dev/sda b 640 0 0 8 1 1 1 15
-#/dev/sdb b 640 0 0 8 16 0 0 -
-#/dev/sdb b 640 0 0 8 17 1 1 15
-#/dev/sdc b 640 0 0 8 32 0 0 -
-#/dev/sdc b 640 0 0 8 33 1 1 15
-#/dev/sdd b 640 0 0 8 48 0 0 -
-#/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
-#/dev/sg c 640 0 0 21 0 0 1 15
-#/dev/scd b 640 0 0 11 0 0 1 15
-#/dev/st c 640 0 0 9 0 0 1 8
-#/dev/nst c 640 0 0 9 128 0 1 8
-#/dev/st c 640 0 0 9 32 1 1 4
-#/dev/st c 640 0 0 9 64 1 1 4
-#/dev/st c 640 0 0 9 96 1 1 4
-
-# Floppy disk devices
-#/dev/fd b 640 0 0 2 0 0 1 2
-#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd b 640 0 0 29 0 0 0 -
-#/dev/bpcd b 640 0 0 41 0 0 0 -
-#/dev/capi20 c 640 0 0 68 0 0 1 2
-#/dev/cdu31a b 640 0 0 15 0 0 0 -
-#/dev/cdu535 b 640 0 0 24 0 0 0 -
-#/dev/cm206cd b 640 0 0 32 0 0 0 -
-#/dev/sjcd b 640 0 0 18 0 0 0 -
-#/dev/sonycd b 640 0 0 15 0 0 0 -
-#/dev/gscd b 640 0 0 16 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 1 4
-#/dev/mcd b 640 0 0 23 0 0 0 -
-#/dev/optcd b 640 0 0 17 0 0 0 -
-
+++ /dev/null
->From 9c5fa914202d20756c56e0c4fd76035ed8f8ced8 Mon Sep 17 00:00:00 2001
-From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
-Date: Mon, 6 Aug 2007 08:31:14 +0200
-Subject: [PATCH 1/1] Add gpio_mouse board setup to atstk1000 board
-
-This patch adds a gpio_mouse_platform_data to the atstk1000 board code and
-registers a gpio_mouse platform_device. This will enable a GPIO mouse on header
-J1 on GPIO of the ATSTK1000 development kit. The board code is enabled/disabled
-in menuconfig.
-
-By connecting J1 (GPIO) to J25 (SWITCH) you can use the following keys to
-simulate a mouse:
-
-SW0: right
-SW1: down
-SW2: up
-SW3: left
-SW5: right button
-SW6: middle button
-SW7: left button
-
-Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
----
- arch/avr32/boards/atstk1000/Kconfig | 16 ++++++++++
- arch/avr32/boards/atstk1000/atstk1002.c | 48 +++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+), 0 deletions(-)
-
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..d99d4bd 100644
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -52,6 +52,22 @@ config BOARD_ATSTK100X_SPI1
- GPIO lines and accessed through the J1 jumper block. Say "y"
- here to configure that SPI controller.
-
-+config BOARD_ATSTK1002_GPIO_MOUSE
-+ bool "Configure gpio_mouse on GPIO J1 header"
-+ depends on !BOARD_ATSTK1002_SW4_CUSTOM
-+ help
-+ Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
-+ 10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
-+ mouse inputs using the the switches SW0 to SW7.
-+
-+ SW0: right
-+ SW1: down
-+ SW2: up
-+ SW3: left
-+ SW5: right button
-+ SW6: middle button
-+ SW7: left button
-+
- config BOARD_ATSTK1000_J2_LED
- bool
- default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c958fd4..c7560e5 100644
---- a/arch/avr32/boards/atstk1000/atstk1002.c
-+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -16,6 +16,7 @@
- #include <linux/types.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/at73c213.h>
-+#include <linux/gpio_mouse.h>
-
- #include <video/atmel_lcdc.h>
-
-@@ -100,6 +101,49 @@ static struct mci_platform_data __initdata mci0_data = {
- .cs = 4,
- };
-
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+static struct gpio_mouse_platform_data gpio_mouse0_data = {
-+ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
-+ {
-+ {
-+ .up = GPIO_PIN_PB(2),
-+ .down = GPIO_PIN_PB(1),
-+ .left = GPIO_PIN_PB(3),
-+ .right = GPIO_PIN_PB(0),
-+ .bleft = GPIO_PIN_PB(7),
-+ .bmiddle = GPIO_PIN_PB(6),
-+ .bright = GPIO_PIN_PB(5),
-+ },
-+ },
-+ .scan_ms = 10,
-+};
-+
-+static struct platform_device gpio_mouse0_device = {
-+ .name = "gpio_mouse",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_mouse0_data,
-+ },
-+};
-+
-+static void __init add_device_gpio_mouse0(void)
-+{
-+ struct platform_device *pdev = &gpio_mouse0_device;
-+ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
-+
-+ at32_select_gpio(data->up, 0);
-+ at32_select_gpio(data->down, 0);
-+ at32_select_gpio(data->left, 0);
-+ at32_select_gpio(data->right, 0);
-+
-+ at32_select_gpio(data->bleft, 0);
-+ at32_select_gpio(data->bmiddle, 0);
-+ at32_select_gpio(data->bright, 0);
-+
-+ platform_device_register(pdev);
-+}
-+#endif
-+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -269,6 +313,10 @@ static int __init atstk1002_init(void)
- atstk1000_setup_j2_leds();
- atstk1002_setup_extdac();
-
-+#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
-+ add_device_gpio_mouse0();
-+#endif
-+
- return 0;
- }
- postcore_initcall(atstk1002_init);
---
-1.5.2.3
-
+++ /dev/null
-state.at73c213_0 {
- control.1 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 2
- comment.range '0 - 31'
- iface MIXER
- name 'Master Playback Volume'
- value.0 21
- value.1 21
- }
- control.2 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 2
- iface MIXER
- name 'Master Playback Switch'
- value.0 true
- value.1 true
- }
- control.3 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 2
- comment.range '0 - 31'
- iface MIXER
- name 'PCM Playback Volume'
- value.0 21
- value.1 21
- }
- control.4 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 2
- iface MIXER
- name 'PCM Playback Switch'
- value.0 true
- value.1 true
- }
- control.5 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'Mono PA Playback Switch'
- value true
- }
- control.6 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 1
- comment.range '0 - 14'
- iface MIXER
- name 'PA Playback Volume'
- value 10
- }
- control.7 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'PA High Gain Playback Switch'
- value true
- }
- control.8 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'PA Playback Switch'
- value true
- }
- control.9 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 1
- comment.range '14 - 31'
- iface MIXER
- name 'Aux Capture Volume'
- value 14
- }
- control.10 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'Aux Capture Switch'
- value false
- }
- control.11 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 2
- comment.range '14 - 31'
- iface MIXER
- name 'Line Capture Volume'
- value.0 14
- value.1 14
- }
- control.12 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'Line Capture Switch'
- value false
- }
-}
+++ /dev/null
-# servers to check. (Separate multiple servers with spaces.)
-NTPSERVERS="pool.ntp.org"
-#
-# additional options for ntpdate
-#NTPOPTIONS="-v"
-NTPOPTIONS="-u"
+++ /dev/null
-# Configuration file for dnsmasq.
-#
-# Format is one option per line, legal options are the same
-# as the long options legal on the command line. See
-# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
-
-# The following two options make you a better netizen, since they
-# tell dnsmasq to filter out queries which the public DNS cannot
-# answer, and which load the servers (especially the root servers)
-# uneccessarily. If you have a dial-on-demand link they also stop
-# these requests from bringing up the link uneccessarily.
-
-# Never forward plain names (without a dot or domain part)
-domain-needed
-# Never forward addresses in the non-routed address spaces.
-bogus-priv
-
-
-# Uncomment this to filter useless windows-originated DNS requests
-# which can trigger dial-on-demand links needlessly.
-# Note that (amongst other things) this blocks all SRV requests,
-# so don't use it if you use eg Kerberos.
-# This option only affects forwarding, SRV records originating for
-# dnsmasq (via srv-host= lines) are not suppressed by it.
-#filterwin2k
-
-# Change this line if you want dns to get its upstream servers from
-# somewhere other that /etc/resolv.conf
-#resolv-file=
-
-# By default, dnsmasq will send queries to any of the upstream
-# servers it knows about and tries to favour servers to are known
-# to be up. Uncommenting this forces dnsmasq to try each query
-# with each server strictly in the order they appear in
-# /etc/resolv.conf
-#strict-order
-
-# If you don't want dnsmasq to read /etc/resolv.conf or any other
-# file, getting its servers from this file instead (see below), then
-# uncomment this
-#no-resolv
-
-# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
-# files for changes and re-read them then uncomment this.
-#no-poll
-
-# Add other name servers here, with domain specs if they are for
-# non-public domains.
-#server=/localnet/192.168.0.1
-
-# Add local-only domains here, queries in these domains are answered
-# from /etc/hosts or DHCP only.
-#local=/localnet/
-
-# Add domains which you want to force to an IP address here.
-# The example below send any host in doubleclick.net to a local
-# webserver.
-#address=/doubleclick.net/127.0.0.1
-
-# If you want dnsmasq to change uid and gid to something other
-# than the default, edit the following lines.
-user=dnsmasq
-#group=
-
-# If you want dnsmasq to listen for DHCP and DNS requests only on
-# specified interfaces (and the loopback) give the name of the
-# interface (eg eth0) here.
-# Repeat the line for more than one interface.
-interface=eth1
-# Or you can specify which interface _not_ to listen on
-except-interface=eth0
-# Or which to listen on by address (remember to include 127.0.0.1 if
-# you use this.)
-#listen-address=
-# If you want dnsmasq to provide only DNS service on an interface,
-# configure it as shown above, and then use the following line to
-# disable DHCP on it.
-#no-dhcp-interface=
-
-# On systems which support it, dnsmasq binds the wildcard address,
-# even when it is listening on only some interfaces. It then discards
-# requests that it shouldn't reply to. This has the advantage of
-# working even when interfaces come and go and change address. If you
-# want dnsmasq to really bind only the interfaces it is listening on,
-# uncomment this option. About the only time you may need this is when
-# running another nameserver on the same machine.
-#bind-interfaces
-
-# If you don't want dnsmasq to read /etc/hosts, uncomment the
-# following line.
-#no-hosts
-# or if you want it to read another file, as well as /etc/hosts, use
-# this.
-addn-hosts=/etc/hosts.dnsmasq
-
-# Set this (and domain: see below) if you want to have a domain
-# automatically added to simple names in a hosts-file.
-#expand-hosts
-
-# Set the domain for dnsmasq. this is optional, but if it is set, it
-# does the following things.
-# 1) Allows DHCP hosts to have fully qualified domain names, as long
-# as the domain part matches this setting.
-# 2) Sets the "domain" DHCP option thereby potentially setting the
-# domain of all systems configured by DHCP
-# 3) Provides the domain part for "expand-hosts"
-domain=example.net
-
-# Uncomment this to enable the integrated DHCP server, you need
-# to supply the range of addresses available for lease and optionally
-# a lease time. If you have more than one network, you will need to
-# repeat this for each network on which you want to supply DHCP
-# service.
-#dhcp-range=192.168.0.50,192.168.0.150,12h
-
-# This is an example of a DHCP range where the netmask is given. This
-# is needed for networks we reach the dnsmasq DHCP server via a relay
-# agent. If you don't know what a DHCP relay agent is, you probably
-# don't need to worry about this.
-dhcp-range=10.0.0.20,10.0.0.254,255.255.255.0,72h
-
-# This is an example of a DHCP range with a network-id, so that
-# some DHCP options may be set only for this network.
-#dhcp-range=red,192.168.0.50,192.168.0.150
-
-# Supply parameters for specified hosts using DHCP. There are lots
-# of valid alternatives, so we will give examples of each. Note that
-# IP addresses DO NOT have to be in the range given above, they just
-# need to be on the same network. The order of the parameters in these
-# do not matter, it's permissble to give name,adddress and MAC in any order
-
-# Always allocate the host with ethernet address 11:22:33:44:55:66
-# The IP address 192.168.0.60
-#dhcp-host=11:22:33:44:55:66,192.168.0.60
-
-# Always set the name of the host with hardware address
-# 11:22:33:44:55:66 to be "fred"
-#dhcp-host=11:22:33:44:55:66,fred
-
-# Always give the host with ethernet address 11:22:33:44:55:66
-# the name fred and IP address 192.168.0.60 and lease time 45 minutes
-#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
-
-# Give the machine which says it's name is "bert" IP address
-# 192.168.0.70 and an infinite lease
-#dhcp-host=bert,192.168.0.70,infinite
-
-# Always give the host with client identifier 01:02:02:04
-# the IP address 192.168.0.60
-#dhcp-host=id:01:02:02:04,192.168.0.60
-
-# Always give the host with client identifier "marjorie"
-# the IP address 192.168.0.60
-#dhcp-host=id:marjorie,192.168.0.60
-
-# Enable the address given for "judge" in /etc/hosts
-# to be given to a machine presenting the name "judge" when
-# it asks for a DHCP lease.
-#dhcp-host=judge
-
-# Never offer DHCP service to a machine whose ethernet
-# address is 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,ignore
-
-# Ignore any client-id presented by the machine with ethernet
-# address 11:22:33:44:55:66. This is useful to prevent a machine
-# being treated differently when running under different OS's or
-# between PXE boot and OS boot.
-#dhcp-host=11:22:33:44:55:66,id:*
-
-# Send extra options which are tagged as "red" to
-# the machine with ethernet address 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,net:red
-
-# Send extra options which are tagged as "red" to
-# any machine with ethernet address starting 11:22:33:
-#dhcp-host=11:22:33:*:*:*,net:red
-
-# Send extra options which are tagged as "red" to any machine whose
-# DHCP vendorclass string includes the substring "Linux"
-#dhcp-vendorclass=red,Linux
-
-# Send extra options which are tagged as "red" to any machine one
-# of whose DHCP userclass strings includes the substring "accounts"
-#dhcp-userclass=red,accounts
-
-# Send extra options which are tagged as "red" to any machine whose
-# MAC address matches the pattern.
-#dhcp-mac=red,00:60:8C:*:*:*
-
-# If this line is uncommented, dnsmasq will read /etc/ethers and act
-# on the ethernet-address/IP pairs found there just as if they had
-# been given as --dhcp-host options. Useful if you keep
-# MAC-address/host mappings there for other purposes.
-read-ethers
-
-# Send options to hosts which ask for a DHCP lease.
-# See RFC 2132 for details of available options.
-# Note that all the common settings, such as netmask and
-# broadcast address, DNS server and default route, are given
-# sane defaults by dnsmasq. You very likely will not need any
-# any dhcp-options. If you use Windows clients and Samba, there
-# are some options which are recommended, they are detailed at the
-# end of this section.
-# For reference, the common options are:
-# subnet mask - 1
-# default router - 3
-# DNS server - 6
-# broadcast address - 28
-
-# Override the default route supplied by dnsmasq, which assumes the
-# router is the same machine as the one running dnsmasq.
-#dhcp-option=3,1.2.3.4
-
-# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
-#dhcp-option=42,192.168.0.4,10.10.0.5
-
-# Set the NTP time server address to be the same machine as
-# is running dnsmasq
-dhcp-option=42,0.0.0.0
-
-# Set the NIS domain name to "welly"
-#dhcp-option=40,welly
-
-# Set the default time-to-live to 50
-#dhcp-option=23,50
-
-# Set the "all subnets are local" flag
-#dhcp-option=27,1
-
-# Send the etherboot magic flag and then etherboot options (a string).
-#dhcp-option=128,e4:45:74:68:00:00
-#dhcp-option=129,NIC=eepro100
-
-# Specify an option which will only be sent to the "red" network
-# (see dhcp-range for the declaration of the "red" network)
-#dhcp-option=red,42,192.168.1.1
-
-# The following DHCP options set up dnsmasq in the same way as is specified
-# for the ISC dhcpcd in
-# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
-# adapted for a typical dnsmasq installation where the host running
-# dnsmasq is also the host running samba.
-# you may want to uncomment them if you use Windows clients and Samba.
-dhcp-option=19,0 # option ip-forwarding off
-dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
-dhcp-option=45,0.0.0.0 # netbios datagram distribution server
-dhcp-option=46,8 # netbios node type
-dhcp-option=47 # empty netbios scope.
-
-# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
-# probably doesn't support this......
-#dhcp-option=119,eng.apple.com,marketing.apple.com
-
-# Send RFC-3442 classless static routes (note the netmask encoding)
-#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
-
-# Send encapsulated vendor-class specific options. The vendor-class
-# is sent as DHCP option 60, and all the options marked with the
-# vendor class are send encapsulated in DHCP option 43. The meaning of
-# the options is defined by the vendor-class. This example sets the
-# mtftp address to 0.0.0.0 for PXEClients
-#dhcp-option=vendor:PXEClient,1,0.0.0.0
-
-# Set the boot filename and tftpd server name and address
-# for BOOTP. You will only need this is you want to
-# boot machines over the network.
-#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
-
-# Set the limit on DHCP leases, the default is 150
-#dhcp-lease-max=150
-
-# The DHCP server needs somewhere on disk to keep its lease database.
-# This defaults to a sane location, but if you want to change it, use
-# the line below.
-dhcp-leasefile=/var/lib/dnsmasq/dnsmasq.leases
-
-# Set the DHCP server to authoritative mode. In this mode it will barge in
-# and take over the lease for any client which broadcasts on the network,
-# whether it has a record of the lease or not. This avoids long timeouts
-# when a machine wakes up on a new network. DO NOT enable this if there's
-# the slighest chance that you might end up accidentally configuring a DHCP
-# server for your campus/company accidentally. The ISC server uses the same
-# the same option, and this URL provides more information:
-# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php
-dhcp-authoritative
-
-# Run an executable when a DHCP lease is created or destroyed.
-# The arguments sent to the script are "add" or "del",
-# then the MAC address, the IP address and finally the hostname
-# if there is one.
-#dhcp-script=/bin/echo
-
-# Set the cachesize here.
-#cache-size=150
-
-# If you want to disable negative caching, uncomment this.
-#no-negcache
-
-# Normally responses which come form /etc/hosts and the DHCP lease
-# file have Time-To-Live set as zero, which conventionally means
-# do not cache further. If you are happy to trade lower load on the
-# server for potentially stale date, you can set a time-to-live (in
-# seconds) here.
-#local-ttl=
-
-# If you want dnsmasq to detect attempts by Verisign to send queries
-# to unregistered .com and .net hosts to its sitefinder service and
-# have dnsmasq instead return the correct NXDOMAIN response, uncomment
-# this line. You can add similar lines to do the same for other
-# registries which have implemented wildcard A records.
-#bogus-nxdomain=64.94.110.11
-
-# If you want to fix up DNS results from upstream servers, use the
-# alias option. This only works for IPv4.
-# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
-#alias=1.2.3.4,5.6.7.8
-# and this maps 1.2.3.x to 5.6.7.x
-#alias=1.2.3.0,5.6.7.0,255.255.255.0
-
-
-# Change these lines if you want dnsmasq to serve MX records.
-
-# Return an MX record named "maildomain.com" with target
-# servermachine.com and preference 50
-#mx-host=maildomain.com,servermachine.com,50
-
-# Set the default target for MX records created using the localmx option.
-#mx-target=servermachine.com
-
-# Return an MX record pointing to the mx-target for all local
-# machines.
-#localmx
-
-# Return an MX record pointing to itself for all local machines.
-#selfmx
-
-# Change the following lines if you want dnsmasq to serve SRV
-# records. These are useful if you want to serve ldap requests for
-# Active Directory and other windows-originated DNS requests.
-# See RFC 2782.
-# You may add multiple srv-host lines.
-# The fields are <name>,<target>,<port>,<priority>,<weight>
-# If the domain part if missing from the name (so that is just has the
-# service and protocol sections) then the domain given by the domain=
-# config option is used. (Note that expand-hosts does not need to be
-# set for this to work.)
-
-# A SRV record sending LDAP for the example.com domain to
-# ldapserver.example.com port 289
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
-
-# A SRV record sending LDAP for the example.com domain to
-# ldapserver.example.com port 289 (using domain=)
-#domain=example.com
-#srv-host=_ldap._tcp,ldapserver.example.com,389
-
-# Two SRV records for LDAP, each with different priorities
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
-
-# A SRV record indicating that there is no LDAP server for the domain
-# example.com
-#srv-host=_ldap._tcp.example.com
-
-
-# Change the following lines to enable dnsmasq to serve TXT records.
-# These are used for things like SPF and zeroconf. (Note that the
-# domain-name expansion done for SRV records _does_not
-# occur for TXT records.)
-
-#Example SPF.
-#txt-record=example.com,v=spf1 a -all
-
-#Example zeroconf
-#txt-record=_http._tcp.example.com,name=value,paper=A4
-
-
-# For debugging purposes, log each DNS query as it passes through
-# dnsmasq.
-#log-queries
-
-# Include a another lot of configuration options.
-#conf-file=/etc/dnsmasq.more.conf
-
+++ /dev/null
-mode "320x240-68"
- # D: 6.891 MHz, H: 17.852 kHz, V: 68.400 Hz
- geometry 320 240 320 240 24
- timings 145116 17 33 10 10 16 1
-endmode
+++ /dev/null
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt> <type> <options> <dump> <pass>
+++ /dev/null
-root::0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-kmem:x:9:
-wheel:x:10:root
-dialout:x:20:
-utmp:x:43:
-staff:x:50:
-www-data::51:
-ftp::52:
-haldaemon:x:68:
-dbus:x:81:
-audio::101:
-users::500:
-default::1000:
-nogroup::65534:
+++ /dev/null
-stk1000.example.net
+++ /dev/null
-127.0.0.1 localhost.localdomain localhost
-127.0.1.1 stk1000.example.net stk1000
-
-# The following lines are desirable for IPv6 capable hosts
-::1 localhost
-::1 ip6-localhost ip6-loopback
-::1 stk1000.example.net stk1000
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
+++ /dev/null
-# Local server
-10.0.0.1 stk1000.example.net
-10.0.0.1 hostmaster.example.net
-10.0.0.1 ftp.example.net
-10.0.0.1 ns.example.net
-10.0.0.1 ssh.example.net
-10.0.0.1 samba.example.net
-10.0.0.1 telnet.example.net
-10.0.0.1 www.example.net
-
-# DHCP pool
-10.0.0.20 dhcp-020.example.net
-10.0.0.21 dhcp-021.example.net
-10.0.0.22 dhcp-022.example.net
-10.0.0.23 dhcp-023.example.net
-10.0.0.24 dhcp-024.example.net
-10.0.0.25 dhcp-025.example.net
-10.0.0.26 dhcp-026.example.net
-10.0.0.27 dhcp-027.example.net
-10.0.0.28 dhcp-028.example.net
-10.0.0.29 dhcp-029.example.net
-10.0.0.30 dhcp-030.example.net
-10.0.0.31 dhcp-031.example.net
-10.0.0.32 dhcp-032.example.net
-10.0.0.33 dhcp-033.example.net
-10.0.0.34 dhcp-034.example.net
-10.0.0.35 dhcp-035.example.net
-10.0.0.36 dhcp-036.example.net
-10.0.0.37 dhcp-037.example.net
-10.0.0.38 dhcp-038.example.net
-10.0.0.39 dhcp-039.example.net
-10.0.0.40 dhcp-040.example.net
-10.0.0.41 dhcp-041.example.net
-10.0.0.42 dhcp-042.example.net
-10.0.0.43 dhcp-043.example.net
-10.0.0.44 dhcp-044.example.net
-10.0.0.45 dhcp-045.example.net
-10.0.0.46 dhcp-046.example.net
-10.0.0.47 dhcp-047.example.net
-10.0.0.48 dhcp-048.example.net
-10.0.0.49 dhcp-049.example.net
-10.0.0.50 dhcp-050.example.net
-10.0.0.51 dhcp-051.example.net
-10.0.0.52 dhcp-052.example.net
-10.0.0.53 dhcp-053.example.net
-10.0.0.54 dhcp-054.example.net
-10.0.0.55 dhcp-055.example.net
-10.0.0.56 dhcp-056.example.net
-10.0.0.57 dhcp-057.example.net
-10.0.0.58 dhcp-058.example.net
-10.0.0.59 dhcp-059.example.net
-10.0.0.60 dhcp-060.example.net
-10.0.0.61 dhcp-061.example.net
-10.0.0.62 dhcp-062.example.net
-10.0.0.63 dhcp-063.example.net
-10.0.0.64 dhcp-064.example.net
-10.0.0.65 dhcp-065.example.net
-10.0.0.66 dhcp-066.example.net
-10.0.0.67 dhcp-067.example.net
-10.0.0.68 dhcp-068.example.net
-10.0.0.69 dhcp-069.example.net
-10.0.0.70 dhcp-070.example.net
-10.0.0.71 dhcp-071.example.net
-10.0.0.72 dhcp-072.example.net
-10.0.0.73 dhcp-073.example.net
-10.0.0.74 dhcp-074.example.net
-10.0.0.75 dhcp-075.example.net
-10.0.0.76 dhcp-076.example.net
-10.0.0.77 dhcp-077.example.net
-10.0.0.78 dhcp-078.example.net
-10.0.0.79 dhcp-079.example.net
-10.0.0.80 dhcp-080.example.net
-10.0.0.81 dhcp-081.example.net
-10.0.0.82 dhcp-082.example.net
-10.0.0.83 dhcp-083.example.net
-10.0.0.84 dhcp-084.example.net
-10.0.0.85 dhcp-085.example.net
-10.0.0.86 dhcp-086.example.net
-10.0.0.87 dhcp-087.example.net
-10.0.0.88 dhcp-088.example.net
-10.0.0.89 dhcp-089.example.net
-10.0.0.90 dhcp-090.example.net
-10.0.0.91 dhcp-091.example.net
-10.0.0.92 dhcp-092.example.net
-10.0.0.93 dhcp-093.example.net
-10.0.0.94 dhcp-094.example.net
-10.0.0.95 dhcp-095.example.net
-10.0.0.96 dhcp-096.example.net
-10.0.0.97 dhcp-097.example.net
-10.0.0.98 dhcp-098.example.net
-10.0.0.99 dhcp-099.example.net
-10.0.0.100 dhcp-100.example.net
-10.0.0.101 dhcp-101.example.net
-10.0.0.102 dhcp-102.example.net
-10.0.0.103 dhcp-103.example.net
-10.0.0.104 dhcp-104.example.net
-10.0.0.105 dhcp-105.example.net
-10.0.0.106 dhcp-106.example.net
-10.0.0.107 dhcp-107.example.net
-10.0.0.108 dhcp-108.example.net
-10.0.0.109 dhcp-109.example.net
-10.0.0.110 dhcp-110.example.net
-10.0.0.111 dhcp-111.example.net
-10.0.0.112 dhcp-112.example.net
-10.0.0.113 dhcp-113.example.net
-10.0.0.114 dhcp-114.example.net
-10.0.0.115 dhcp-115.example.net
-10.0.0.116 dhcp-116.example.net
-10.0.0.117 dhcp-117.example.net
-10.0.0.118 dhcp-118.example.net
-10.0.0.119 dhcp-119.example.net
-10.0.0.120 dhcp-120.example.net
-10.0.0.121 dhcp-121.example.net
-10.0.0.122 dhcp-122.example.net
-10.0.0.123 dhcp-123.example.net
-10.0.0.124 dhcp-124.example.net
-10.0.0.125 dhcp-125.example.net
-10.0.0.126 dhcp-126.example.net
-10.0.0.127 dhcp-127.example.net
-10.0.0.128 dhcp-128.example.net
-10.0.0.129 dhcp-129.example.net
-10.0.0.130 dhcp-130.example.net
-10.0.0.131 dhcp-131.example.net
-10.0.0.132 dhcp-132.example.net
-10.0.0.133 dhcp-133.example.net
-10.0.0.134 dhcp-134.example.net
-10.0.0.135 dhcp-135.example.net
-10.0.0.136 dhcp-136.example.net
-10.0.0.137 dhcp-137.example.net
-10.0.0.138 dhcp-138.example.net
-10.0.0.139 dhcp-139.example.net
-10.0.0.140 dhcp-140.example.net
-10.0.0.141 dhcp-141.example.net
-10.0.0.142 dhcp-142.example.net
-10.0.0.143 dhcp-143.example.net
-10.0.0.144 dhcp-144.example.net
-10.0.0.145 dhcp-145.example.net
-10.0.0.146 dhcp-146.example.net
-10.0.0.147 dhcp-147.example.net
-10.0.0.148 dhcp-148.example.net
-10.0.0.149 dhcp-149.example.net
-10.0.0.150 dhcp-150.example.net
-10.0.0.151 dhcp-151.example.net
-10.0.0.152 dhcp-152.example.net
-10.0.0.153 dhcp-153.example.net
-10.0.0.154 dhcp-154.example.net
-10.0.0.155 dhcp-155.example.net
-10.0.0.156 dhcp-156.example.net
-10.0.0.157 dhcp-157.example.net
-10.0.0.158 dhcp-158.example.net
-10.0.0.159 dhcp-159.example.net
-10.0.0.160 dhcp-160.example.net
-10.0.0.161 dhcp-161.example.net
-10.0.0.162 dhcp-162.example.net
-10.0.0.163 dhcp-163.example.net
-10.0.0.164 dhcp-164.example.net
-10.0.0.165 dhcp-165.example.net
-10.0.0.166 dhcp-166.example.net
-10.0.0.167 dhcp-167.example.net
-10.0.0.168 dhcp-168.example.net
-10.0.0.169 dhcp-169.example.net
-10.0.0.170 dhcp-170.example.net
-10.0.0.171 dhcp-171.example.net
-10.0.0.172 dhcp-172.example.net
-10.0.0.173 dhcp-173.example.net
-10.0.0.174 dhcp-174.example.net
-10.0.0.175 dhcp-175.example.net
-10.0.0.176 dhcp-176.example.net
-10.0.0.177 dhcp-177.example.net
-10.0.0.178 dhcp-178.example.net
-10.0.0.179 dhcp-179.example.net
-10.0.0.180 dhcp-180.example.net
-10.0.0.181 dhcp-181.example.net
-10.0.0.182 dhcp-182.example.net
-10.0.0.183 dhcp-183.example.net
-10.0.0.184 dhcp-184.example.net
-10.0.0.185 dhcp-185.example.net
-10.0.0.186 dhcp-186.example.net
-10.0.0.187 dhcp-187.example.net
-10.0.0.188 dhcp-188.example.net
-10.0.0.189 dhcp-189.example.net
-10.0.0.190 dhcp-190.example.net
-10.0.0.191 dhcp-191.example.net
-10.0.0.192 dhcp-192.example.net
-10.0.0.193 dhcp-193.example.net
-10.0.0.194 dhcp-194.example.net
-10.0.0.195 dhcp-195.example.net
-10.0.0.196 dhcp-196.example.net
-10.0.0.197 dhcp-197.example.net
-10.0.0.198 dhcp-198.example.net
-10.0.0.199 dhcp-199.example.net
-10.0.0.200 dhcp-200.example.net
-10.0.0.201 dhcp-201.example.net
-10.0.0.202 dhcp-202.example.net
-10.0.0.203 dhcp-203.example.net
-10.0.0.204 dhcp-204.example.net
-10.0.0.205 dhcp-205.example.net
-10.0.0.206 dhcp-206.example.net
-10.0.0.207 dhcp-207.example.net
-10.0.0.208 dhcp-208.example.net
-10.0.0.209 dhcp-209.example.net
-10.0.0.210 dhcp-210.example.net
-10.0.0.211 dhcp-211.example.net
-10.0.0.212 dhcp-212.example.net
-10.0.0.213 dhcp-213.example.net
-10.0.0.214 dhcp-214.example.net
-10.0.0.215 dhcp-215.example.net
-10.0.0.216 dhcp-216.example.net
-10.0.0.217 dhcp-217.example.net
-10.0.0.218 dhcp-218.example.net
-10.0.0.219 dhcp-219.example.net
-10.0.0.220 dhcp-220.example.net
-10.0.0.221 dhcp-221.example.net
-10.0.0.222 dhcp-222.example.net
-10.0.0.223 dhcp-223.example.net
-10.0.0.224 dhcp-224.example.net
-10.0.0.225 dhcp-225.example.net
-10.0.0.226 dhcp-226.example.net
-10.0.0.227 dhcp-227.example.net
-10.0.0.228 dhcp-228.example.net
-10.0.0.229 dhcp-229.example.net
-10.0.0.230 dhcp-230.example.net
-10.0.0.231 dhcp-231.example.net
-10.0.0.232 dhcp-232.example.net
-10.0.0.233 dhcp-233.example.net
-10.0.0.234 dhcp-234.example.net
-10.0.0.235 dhcp-235.example.net
-10.0.0.236 dhcp-236.example.net
-10.0.0.237 dhcp-237.example.net
-10.0.0.238 dhcp-238.example.net
-10.0.0.239 dhcp-239.example.net
-10.0.0.240 dhcp-240.example.net
-10.0.0.241 dhcp-241.example.net
-10.0.0.242 dhcp-242.example.net
-10.0.0.243 dhcp-243.example.net
-10.0.0.244 dhcp-244.example.net
-10.0.0.245 dhcp-245.example.net
-10.0.0.246 dhcp-246.example.net
-10.0.0.247 dhcp-247.example.net
-10.0.0.248 dhcp-248.example.net
-10.0.0.249 dhcp-249.example.net
-10.0.0.250 dhcp-250.example.net
-10.0.0.251 dhcp-251.example.net
-10.0.0.252 dhcp-252.example.net
-10.0.0.253 dhcp-253.example.net
-10.0.0.254 dhcp-254.example.net
+++ /dev/null
-# Allow all trafic
-A: *
+++ /dev/null
-#netbios-ssn stream tcp nowait root.root /usr/sbin/smbd smbd
-#netbios-ns dgram udp wait root.root /usr/sbin/nmbd nmbd
-#swat stream tcp nowait.400 root.root /usr/sbin/swat swat
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/usr/sbin/alsactl
-
-# Exit silently if alsa-utils isn't installed
-[ -x ${PROGRAM} ] || exit 0
-
-echo -n "Saving mixer state: "
-if ${PROGRAM} store; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-IFDOWN=/sbin/ifdown
-
-echo -n "Stopping networking: "
-if ${IFDOWN} -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-MOUNT=/bin/mount
-MKDIR=/bin/mkdir
-
-retval=0
-
-mount_fs()
-{
- if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then
- return;
- fi
-
- if [ "$4" = "" ]; then
- if ! ${MOUNT} -t $3 $1 $2; then
- echo " mount $2 failed"
- retval=1
- return 1
- else
- echo " $2 mounted"
- fi
- else
- if ! ${MOUNT} -t $3 -o $4 $1 $2; then
- echo " mount $2 failed"
- retval=1
- return 1
- else
- echo " $2 mounted"
- fi
- fi
-
- return 0
-}
-
-mkdir_fs()
-{
- if [ "$1" = "" ]; then
- return;
- fi
-
- if ! ${MKDIR} $1; then
- echo " mkdir $1 failed"
- retval=1
- return 1
- else
- echo " $1 directory made"
- fi
-
- return 0
-}
-
-echo "Mounting virtual filesystems:"
-
-mount_fs proc /proc proc
-mount_fs sys /sys sysfs
-
-if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
- mkdir_fs /dev/pts
- mount_fs pts /dev/pts devpts
- mkdir_fs /dev/shm
- # g_serial is not detected by mdev.
- mknod /dev/ttygserial c 127 0
-fi
-
-mount_fs config /config configfs
-mount_fs tmp /tmp tmpfs
-mount_fs run /var/run tmpfs
-mount_fs log /var/log tmpfs
-
-if [ $retval -ne 0 ]; then
- echo " WARNING: not able to mount all virtual file systems"
-fi
-
-exit $retval
+++ /dev/null
-#!/bin/sh
-
-echo -n "Setting up mdev: "
-set -e
-trap 'echo "failed"' EXIT
-/bin/ln -s /proc/self/fd /dev/fd
-/bin/ln -s /proc/self/fd/0 /dev/stdin
-/bin/ln -s /proc/self/fd/1 /dev/stdout
-/bin/ln -s /proc/self/fd/2 /dev/stderr
-/bin/ln -s /proc/kcore /dev/core
-/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
-/sbin/mdev -s
-trap - EXIT
-echo "done"
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/bin/hostname
-
-echo -n "Setting hostname: "
-[ -x ${PROGRAM} ] || (echo " missing"; exit 0)
-
-if [ -f /etc/hostname ]; then
- HOST="$(cat /etc/hostname)"
-else
- HOST="localhost.localdomain"
-fi
-
-start() {
- if ${PROGRAM} "${HOST}"; then
- echo "'${HOST}'"
- else
- echo "failed"
- exit 1
- fi
-}
-
-stop() {
- return 0
-}
-
-restart() {
- stop
- start
-}
-
-case "$1" in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart|reload)
- restart
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart}"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-#!/bin/sh
-
-FBV=/usr/bin/fbv
-FBSET=/usr/sbin/fbset
-FBMODEFILE="/etc/fb.modes"
-SPLASHFILE="/etc/stk1000bootsplash.jpg"
-
-echo -n "Bootsplash image: "
-if [ ! -x "${FBV}" -o ! -x "${FBSET}" -o \
- ! -f "${SPLASHFILE}" -o ! -f "${FBMODEFILE}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ! ${FBSET} 320x240-68; then
- echo "failed"
- exit 1
-fi
-
-${FBV} ${SPLASHFILE} > /dev/null &
-if [ $? -eq 0 ]; then
- echo "loaded"
-else
- echo "failed"
-fi
+++ /dev/null
-#!/bin/sh
-
-SYSLOGD=/sbin/syslogd
-
-echo -n "Starting syslogd: "
-if [ ! -x "${SYSLOGD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${SYSLOGD}; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
-
-echo -n "Log messages to syslog: "
-if echo 4 4 1 7 > /proc/sys/kernel/printk; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-KLOGD=/sbin/klogd
-
-echo -n "Starting klogd: "
-if [ ! -x "${KLOGD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${KLOGD}; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-MODPROBE=/sbin/modprobe
-
-echo -n "Probing modules: "
-if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then
- echo "missing"
- exit 1
-else
- echo
-fi
-
-grep '^[^#]' "/etc/modules" | \
-while read module args; do
- [ "$module" ] || continue
- if ${MODPROBE} $module $args; then
- echo " $module loaded"
- else
- echo " $module failed"
- fi
-done
+++ /dev/null
-#!/bin/sh
-
-MOUNT=/bin/mount
-
-echo -n "Mounting local filesystems: "
-if ${MOUNT} -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#! /bin/sh
-
-IFUP=/sbin/ifup
-
-echo -n "Network interfaces: "
-if ${IFUP} -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-TELNETD=/usr/sbin/telnetd
-
-echo -n "Starting telnetd: "
-if [ ! -x "${TELNETD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${TELNETD} -l /bin/sh; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-INETD=/usr/sbin/inetd
-
-echo -n "Starting inetd: "
-if [ ! -x "${INETD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${INETD}; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-HTTPD=/usr/sbin/httpd
-
-echo -n "Starting httpd: "
-if [ ! -x "${HTTPD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${HTTPD} -h /www; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-NTPDATE=/usr/bin/ntpdate
-
-if [ -f /etc/default/ntpdate ]; then
- . /etc/default/ntpdate
-else
- echo "WARNING: missing /etc/default/ntpdate"
- exit 1
-fi
-
-echo -n "Starting ntpdate: "
-if [ ! -x ${NTPDATE} ]; then
- echo "missing"
- echo -n " WARNING: could not syncronize clock, "
- echo "edit NTPSERVERS in /etc/default/ntpdate."
- exit 1
-fi
-
-if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then
- echo "done"
-else
- echo "failed"
- echo -n " WARNING: could not syncronize clock, "
- echo "edit NTPSERVERS in /etc/default/ntpdate."
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-MOUNT=/bin/mount
-
-echo -n "Mounting remote filesystems: "
-if ${MOUNT} -t nfs -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/usr/sbin/alsactl
-
-# Exit silently if alsa-utils isn't installed
-[ -x ${PROGRAM} ] || exit 0
-
-echo -n "Restoring mixer state: "
-if [ ! -f /etc/asound.state ]; then
- echo "missing"
- exit 1
-fi
-
-if ${PROGRAM} restore; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-echo -n "Get board type for GPIO: "
-if [ ! -e "/etc/release" ]; then
- echo "missing";
- exit 1
-fi
-
-BOARD=`cat /etc/release | cut -d ' ' -f1`
-
-if [ "${BOARD}" == "" ]; then
- echo "none";
-elif [ "${BOARD}" == "NGW" ]; then
- echo "'${BOARD}'"
-
- echo -n " boot LED: "
- if mkdir /config/gpio/bootled > /dev/null 2> /dev/null; then
- if ! echo 0 > /config/gpio/bootled/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x10000 > /config/gpio/bootled/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x10000 > /config/gpio/bootled/oe_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/bootled/enabled; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x10000 > /dev/gpio0; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-
- echo -n " LED A: "
- if mkdir /config/gpio/leda > /dev/null 2> /dev/null; then
- if ! echo 0 > /config/gpio/leda/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/leda/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/leda/oe_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/leda/enabled; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0 > /dev/gpio1; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-
- echo -n " LED B: "
- if mkdir /config/gpio/ledb > /dev/null 2> /dev/null; then
- if ! echo 4 > /config/gpio/ledb/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/ledb/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/ledb/oe_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/ledb/enabled; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0 > /dev/gpio2; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-elif [ "${BOARD}" == "STK1000" ]; then # end NGW
- echo "'${BOARD}'"
-
- echo -n " switches: "
- if mkdir /config/gpio/switches > /dev/null 2> /dev/null; then
- if ! echo 1 > /config/gpio/switches/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0xff > /config/gpio/switches/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/switches/enabled; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-else # end STK1000
- echo "'${BOARD}'"
- echo " WARNING: no GPIO for this board"
-fi
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/usr/bin/fbv
-SPLASHFILE="/etc/stk1000splash.jpg"
-
-echo -n "Splash image: "
-if [ ! -x "${PROGRAM}" -o ! -f "${SPLASHFILE}" ]; then
- echo "missing"
- exit 1
-fi
-
-${PROGRAM} ${SPLASHFILE} > /dev/null &
-if [ $? -eq 0 ]; then
- echo "loaded"
-else
- echo "failed"
-fi
+++ /dev/null
-#!/bin/sh
-
-echo "Shutting down ..."
-for k in /etc/init.d/K*; do
- $k stop
-done
+++ /dev/null
-#!/bin/sh
-
-for s in /etc/init.d/S*; do
- if [ -x $s ]; then
- $s start
- fi
-done
-
-echo
-echo "STK1000 ready"
-echo
+++ /dev/null
-# Inittab for the ATSTK1000 development board
-#
-# Note: BusyBox init doesn't support runlevels. The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action == one of sysinit, respawn, askfirst, wait, and once
-# process == program to run
-
-# Run the rcS script after kernel is booted.
-::sysinit:/etc/init.d/rcS
-
-# Run a shell on the first serial port. Comment out if you want a getty instead.
-ttyS0::respawn:-/bin/sh
-
-# Run a shell on the g_serial port (USB gadget device)? This shell will spawn
-# error message if the device is not connected.
-#ttygserial::respawn:-/bin/sh
-
-# Uncomment this to run a getty on the first serial port.
-#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100
-
-# Run a script on shutdown.
-::shutdown:/etc/init.d/rcK
+++ /dev/null
-# mdev.conf for ATSTK1000
-#
-# Syntax:
-# <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>]
-# @: run <CMD> after creating
-# $: run <CMD> before removal
-# *: like @ and $ at the same time
-# <CMD> is run inside /dev using system()
-
-full 0:0 666
-null 0:0 777
-zero 0:0 666
-
-random 0:0 444
-urandom 0:0 444
-
-console 0:5 0600
-kmem 0:9 000
-mem 0:9 0640
-ptmx 0:5 0660
-
-sda.* 0:6 0660
-sdb.* 0:6 0660
-hda.* 0:6 0660
-hdb.* 0:6 0660
-mtd.* 0:6 0660
-mmc.* 0:6 0660
-
-# Move input devices to input directory
-event.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
-mice 0:0 0660 @(mkdir -p input&&mv $MDEV input)
-mouse.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
-
-# Move sound devices to sound directory
-pcm.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-seq 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-timer 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-control.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-
-tty 0:5 0660
-tty0.* 0:5 0660
-tty1.* 0:5 0660
-tty2.* 0:5 0660
-tty3.* 0:5 0660
-tty4.* 0:5 0660
-tty5.* 0:5 0660
-tty6.* 0:5 0660
-
-ttyS.* 0:20 640
+++ /dev/null
-snd-at73c213
-snd-pcm-oss
-gpio_mouse
-mousedev
+++ /dev/null
-#
-# MPlayer configuration file
-#
-# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
-# and per user from ~/.mplayer/config, where per-user settings override
-# system-wide settings, all of which are overrriden by the command line.
-#
-# The configuration file settings are the same as the command line
-# options without the preceding '-'.
-#
-# See the CONFIGURATION FILES section in the man page
-# for a detailed description of the syntax.
-
-
-##################
-# video settings #
-##################
-
-# Specify default video driver (see -vo help for a list).
-vo=fbdev2
-
-# Direct rendring, skip double buffering for framebuffer device
-dr=yes
-
-# Use SDL video with the aalib subdriver by default.
-#vo = sdl:aalib
-
-# FBdev driver:
-#
-# mode to use (read from fb.modes)
-#fbmode = 640x480-120
-#
-# location of the fb.modes file
-#fbmodeconfig = /etc/fb.modes
-
-# Specify your monitor timings for the vesa and fbdev video output drivers.
-# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
-# that exceed the capabilities of your monitor, you may damage it.
-#
-# horizontal frequency range (k stands for 1000)
-#monitor-hfreq = 31.5k-50k,70k
-#
-# vertical frequency range
-#monitor-vfreq = 50-90
-#
-# dotclock (or pixelclock) range (m stands for 1000000)
-#monitor-dotclock = 30M-300M
-
-# Start in fullscreen mode by default.
-#fs=yes
-
-# Change to a different videomode when going fullscreen.
-#vm=yes
-
-# Override the autodetected color depth, may need 'vm=yes' as well.
-#bpp=0
-
-# Enable software scaling (powerful CPU needed) for video output
-# drivers that do not support hardware scaling.
-#zoom=yes
-
-# standard monitor size, with square pixels
-#monitoraspect=4:3
-
-# Use this for a widescreen monitor, non-square pixels.
-#monitoraspect=16:9
-
-# Keep the player window on top of all other windows.
-#ontop=yes
-
-
-##################
-# audio settings #
-##################
-
-# Specify default audio driver (see -ao help for a list).
-ao=oss,
-
-# Use SDL audio driver with the esd subdriver by default.
-#ao = sdl:esd
-
-# Specify the mixer device.
-#mixer = /dev/mixer
-
-# Resample the sound to 44100Hz with the lavcresample audio filter.
-#af=lavcresample=44100
-
-# Specify default audio codec (see -ac help for a list).
-ac=mad,
-
-
-##################
-# other settings #
-##################
-
-# Drop frames to preserve audio/video sync.
-#framedrop = yes
-
-# Specify your preferred skin here (skins are searched for in
-# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
-#skin = Abyss
-
-# Resample the font alphamap.
-# 0 plain white fonts
-# 0.75 very narrow black outline (default)
-# 1 narrow black outline
-# 10 bold black outline
-#ffactor = 0.75
-
-# cache settings
-#
-# Use 8MB input cache by default.
-#cache = 8192
-#
-# Prefill 20% of the cache before starting playback.
-#cache-min = 20.0
-#
-# Prefill 50% of the cache before restarting playback after the cache emptied.
-#cache-seek-min = 50
-
-# DVD: Display English subtitles if available.
-#slang = en
-
-# DVD: Play English audio tracks if available.
-#alang = en
-
-
-# You can also include other configuration files.
-#include = /path/to/the/file/you/want/to/include
+++ /dev/null
-../proc/mounts
\ No newline at end of file
+++ /dev/null
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
-# Configure Ethernet 0
-auto eth0
-iface eth0 inet dhcp
-
-# Configure Ethernet 1, not enabled by default
-#auto eth1
-iface eth1 inet dhcp
+++ /dev/null
-# /etc/ntp.conf, configuration for ntpd
-
-# ntpd will use syslog() if logfile is not defined
-#logfile /var/log/ntpd
-
-driftfile /var/lib/ntp/ntp.drift
-statsdir /var/log/
-
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
-
-# You do need to talk to an NTP server or two (or three).
-#server ntp.your-provider.example
-
-# pool.ntp.org maps to more than 100 low-stratum NTP servers.
-# Your server will pick a different set every time it starts up.
-# *** Please consider joining the pool! ***
-# *** <http://www.pool.ntp.org/#join> ***
-server pool.ntp.org
-server pool.ntp.org
-
-# ... and use the local system clock as a reference if all else fails
-# NOTE: in a local network, set the local stratum of *one* stable server
-# to 10; otherwise your clocks will drift apart if you lose connectivity.
-server 127.127.1.0
-fudge 127.127.1.0 stratum 13
-
-# By default, exchange time with everybody, but don't allow configuration.
-# See /usr/share/doc/ntp-doc/html/accopt.html for details.
-restrict default kod notrap nomodify nopeer noquery
-
-# Local users may interrogate the ntp server more closely.
-restrict 127.0.0.1 nomodify
-
-# Clients from this (example!) subnet have unlimited access,
-# but only if cryptographically authenticated
-restrict 10.0.0.0 mask 255.255.255.0 notrust
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-broadcast 10.0.0.255
-
-# If you want to listen to time broadcasts on your local subnet,
-# de-comment the next lines. Please do this only if you trust everybody
-# on the network!
-#disable auth
-#broadcastclient
+++ /dev/null
-root:x:0:0:root:/:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-haldaemon:x:68:68:hald:/:/bin/sh
-dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
-ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash
-dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false
-sshd:x:110:65534:Operator:/var/run/sshd:/bin/false
-nobody:x:65534:65534:nobody:/nonexistent:/bin/false
-avr32:x:500:500:Linux User,,,:/home/avr32:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
+++ /dev/null
-ServerName "ATSTK1002 FTP server"
-ServerType standalone
-DefaultServer on
-
-# Port 21 is the standard FTP port.
-Port 21
-
-# Umask 022 is a good standard umask to prevent new dirs and files
-# from being group and world writable.
-Umask 022
-
-# Note that this ONLY works in standalone mode, in inetd mode you should use an
-# inetd server that allows you to limit maximum number of processes per service
-# (such as inetd).
-MaxInstances 5
-
-# Set the user and group under which the server will run.
-User nobody
-Group nogroup
-
-# To cause every FTP user to be "jailed" (chrooted) into their home
-# directory, uncomment this line.
-#DefaultRoot ~
-
-# Normally, we want files to be overwriteable.
-AllowOverwrite on
-
-# Deny use of SITE CHMOD, uncomment the three lines below.
-#<Limit SITE_CHMOD>
-# DenyAll
-#</Limit>
+++ /dev/null
-# /etc/protocols:
-# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $
-#
-# Internet (IP) protocols
-#
-# from: @(#)protocols 5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-#
-# See also http://www.iana.org/assignments/protocol-numbers
-
-ip 0 IP # internet protocol, pseudo protocol number
-#hopopt 0 HOPOPT # hop-by-hop options for ipv6
-icmp 1 ICMP # internet control message protocol
-igmp 2 IGMP # internet group management protocol
-ggp 3 GGP # gateway-gateway protocol
-ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
-st 5 ST # ST datagram mode
-tcp 6 TCP # transmission control protocol
-cbt 7 CBT # CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
-egp 8 EGP # exterior gateway protocol
-igp 9 IGP # any private interior gateway (Cisco: for IGRP)
-bbn-rcc 10 BBN-RCC-MON # BBN RCC Monitoring
-nvp 11 NVP-II # Network Voice Protocol
-pup 12 PUP # PARC universal packet protocol
-argus 13 ARGUS # ARGUS
-emcon 14 EMCON # EMCON
-xnet 15 XNET # Cross Net Debugger
-chaos 16 CHAOS # Chaos
-udp 17 UDP # user datagram protocol
-mux 18 MUX # Multiplexing protocol
-dcn 19 DCN-MEAS # DCN Measurement Subsystems
-hmp 20 HMP # host monitoring protocol
-prm 21 PRM # packet radio measurement protocol
-xns-idp 22 XNS-IDP # Xerox NS IDP
-trunk-1 23 TRUNK-1 # Trunk-1
-trunk-2 24 TRUNK-2 # Trunk-2
-leaf-1 25 LEAF-1 # Leaf-1
-leaf-2 26 LEAF-2 # Leaf-2
-rdp 27 RDP # "reliable datagram" protocol
-irtp 28 IRTP # Internet Reliable Transaction Protocol
-iso-tp4 29 ISO-TP4 # ISO Transport Protocol Class 4
-netblt 30 NETBLT # Bulk Data Transfer Protocol
-mfe-nsp 31 MFE-NSP # MFE Network Services Protocol
-merit-inp 32 MERIT-INP # MERIT Internodal Protocol
-sep 33 SEP # Sequential Exchange Protocol
-3pc 34 3PC # Third Party Connect Protocol
-idpr 35 IDPR # Inter-Domain Policy Routing Protocol
-xtp 36 XTP # Xpress Tranfer Protocol
-ddp 37 DDP # Datagram Delivery Protocol
-idpr-cmtp 38 IDPR-CMTP # IDPR Control Message Transport Proto
-tp++ 39 TP++ # TP++ Transport Protocol
-il 40 IL # IL Transport Protocol
-ipv6 41 IPv6 # IPv6
-sdrp 42 SDRP # Source Demand Routing Protocol
-ipv6-route 43 IPv6-Route # Routing Header for IPv6
-ipv6-frag 44 IPv6-Frag # Fragment Header for IPv6
-idrp 45 IDRP # Inter-Domain Routing Protocol
-rsvp 46 RSVP # Resource ReSerVation Protocol
-gre 47 GRE # Generic Routing Encapsulation
-mhrp 48 MHRP # Mobile Host Routing Protocol
-bna 49 BNA # BNA
-ipv6-crypt 50 IPv6-Crypt # Encryption Header for IPv6
-ipv6-auth 51 IPv6-Auth # Authentication Header for IPv6
-i-nlsp 52 I-NLSP # Integrated Net Layer Security TUBA
-swipe 53 SWIPE # IP with Encryption
-narp 54 NARP # NBMA Address Resolution Protocol
-mobile 55 MOBILE # IP Mobility
-tlsp 56 TLSP # Transport Layer Security Protocol
-skip 57 SKIP # SKIP
-ipv6-icmp 58 IPv6-ICMP # ICMP for IPv6
-ipv6-nonxt 59 IPv6-NoNxt # No Next Header for IPv6
-ipv6-opts 60 IPv6-Opts # Destination Options for IPv6
-# 61 # any host internal protocol
-cftp 62 CFTP # CFTP
-# 63 # any local network
-sat-expak 64 SAT-EXPAK # SATNET and Backroom EXPAK
-kryptolan 65 KRYPTOLAN # Kryptolan
-rvd 66 RVD # MIT Remote Virtual Disk Protocol
-ippc 67 IPPC # Internet Pluribus Packet Core
-# 68 # any distributed file system
-sat-mon 69 SAT-MON # SATNET Monitoring
-visa 70 VISA # VISA Protocol
-ipcv 71 IPCV # Internet Packet Core Utility
-cpnx 72 CPNX # Computer Protocol Network Executive
-cphb 73 CPHB # Computer Protocol Heart Beat
-wsn 74 WSN # Wang Span Network
-pvp 75 PVP # Packet Video Protocol
-br-sat-mon 76 BR-SAT-MON # Backroom SATNET Monitoring
-sun-nd 77 SUN-ND # SUN ND PROTOCOL-Temporary
-wb-mon 78 WB-MON # WIDEBAND Monitoring
-wb-expak 79 WB-EXPAK # WIDEBAND EXPAK
-iso-ip 80 ISO-IP # ISO Internet Protocol
-vmtp 81 VMTP # Versatile Message Transport
-secure-vmtp 82 SECURE-VMTP # SECURE-VMTP
-vines 83 VINES # VINES
-ttp 84 TTP # TTP
-nsfnet-igp 85 NSFNET-IGP # NSFNET-IGP
-dgp 86 DGP # Dissimilar Gateway Protocol
-tcf 87 TCF # TCF
-eigrp 88 EIGRP # Enhanced Interior Routing Protocol (Cisco)
-ospf 89 OSPFIGP # Open Shortest Path First IGP
-sprite-rpc 90 Sprite-RPC # Sprite RPC Protocol
-larp 91 LARP # Locus Address Resolution Protocol
-mtp 92 MTP # Multicast Transport Protocol
-ax.25 93 AX.25 # AX.25 Frames
-ipip 94 IPIP # Yet Another IP encapsulation
-micp 95 MICP # Mobile Internetworking Control Pro.
-scc-sp 96 SCC-SP # Semaphore Communications Sec. Pro.
-etherip 97 ETHERIP # Ethernet-within-IP Encapsulation
-encap 98 ENCAP # Yet Another IP encapsulation
-# 99 # any private encryption scheme
-gmtp 100 GMTP # GMTP
-ifmp 101 IFMP # Ipsilon Flow Management Protocol
-pnni 102 PNNI # PNNI over IP
-pim 103 PIM # Protocol Independent Multicast
-aris 104 ARIS # ARIS
-scps 105 SCPS # SCPS
-qnx 106 QNX # QNX
-a/n 107 A/N # Active Networks
-ipcomp 108 IPComp # IP Payload Compression Protocol
-snp 109 SNP # Sitara Networks Protocol
-compaq-peer 110 Compaq-Peer # Compaq Peer Protocol
-ipx-in-ip 111 IPX-in-IP # IPX in IP
-vrrp 112 VRRP # Virtual Router Redundancy Protocol
-pgm 113 PGM # PGM Reliable Transport Protocol
-# 114 # any 0-hop protocol
-l2tp 115 L2TP # Layer Two Tunneling Protocol
-ddx 116 DDX # D-II Data Exchange
-iatp 117 IATP # Interactive Agent Transfer Protocol
-stp 118 STP # Schedule Transfer
-srp 119 SRP # SpectraLink Radio Protocol
-uti 120 UTI # UTI
-smp 121 SMP # Simple Message Protocol
-sm 122 SM # SM
-ptp 123 PTP # Performance Transparency Protocol
-isis 124 ISIS # ISIS over IPv4
-fire 125 FIRE
-crtp 126 CRTP # Combat Radio Transport Protocol
-crdup 127 CRUDP # Combat Radio User Datagram
-sscopmce 128 SSCOPMCE
-iplt 129 IPLT
-sps 130 SPS # Secure Packet Shield
-pipe 131 PIPE # Private IP Encapsulation within IP
-sctp 132 SCTP # Stream Control Transmission Protocol
-fc 133 FC # Fibre Channel
-# rsvp-e2e-ignore 134 RSVP-E2E-IGNORE
-# 134-254 # Unassigned
-# 255 # Reserved
+++ /dev/null
-../tmp/resolv.conf
\ No newline at end of file
+++ /dev/null
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# For a step to step guide on installing, configuring and using samba,
-# read the Samba-HOWTO-Collection. This may be obtained from:
-# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
-#
-# Many working examples of smb.conf files can be found in the
-# Samba-Guide which is generated daily and can be downloaded from:
-# http://www.samba.org/samba/docs/Samba-Guide.pdf
-#
-# Any line which starts with a ; (semi-colon) or a # (hash)
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors.
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
- workgroup = AVR32
-
-# Network name
- netbios name = stk1000
-
-# server string is the equivalent of the NT Description field
- server string = AVR32 STK1000 development kit
-
-# Security mode. Defines in which mode Samba will operate. Possible
-# values are share, user, server, domain and ads. Most people will want
-# user level security. See the Samba-HOWTO-Collection for details.
- security = user
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
- hosts allow = 10.0.0. 127.
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
- load printers = no
-
-# you may wish to override the location of the printcap file
-; printcap name = /etc/printcap
-
-# on SystemV system setting printcap name to lpstat should allow
-# you to automatically obtain a printer list from the SystemV spool
-# system
-; printcap name = lpstat
-
-# It should not be necessary to specify the print system type unless
-# it is non-standard. Currently supported print systems include:
-# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
-; printing = cups
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-; guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
- log file = /var/log/samba/log.%m
- debug level = 1
- syslog = 0
-
-# Put a capping on the size of the log files (in Kb).
- max log size = 1000
-
-# Use password server option only with security = server
-# The argument list may include:
-# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-# password server = *
-; password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-; realm = MY_REALM
-
-# Backend to store user information in. New installations should
-# use either tdbsam or ldapsam. smbpasswd is available for backwards
-# compatibility. tdbsam requires no further configuration.
- passdb backend = smbpasswd:/etc/samba/smbpasswd
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-# this line. The included file is read at that point.
-; include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
- interfaces = lo eth0
-
- socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
- local master = yes
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
- os level = 254
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
- domain master = yes
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
- preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for
-# Windows95 workstations.
-; domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-; logon script = %m.bat
-# run a specific logon batch file per username
-; logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-# %L substitutes for this servers netbios name, %U is username
-# You must uncomment the [Profiles] share below
-; logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-; wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-; wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one WINS Server on the network. The default is NO.
-; wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
- dns proxy = no
-
-# These scripts are used on a domain controller or stand-alone
-# machine to add or delete corresponding unix accounts
-; add user script = /usr/sbin/useradd %u
-; add group script = /usr/sbin/groupadd %g
-; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-; delete user script = /usr/sbin/userdel %u
-; delete user from group script = /usr/sbin/deluser %u %g
-; delete group script = /usr/sbin/groupdel %g
-
-# Unix charset on the filesystem
- unix charset = iso8859-1
-
-# Code page for the client
-# client code page = 850
-
-#============================ Share Definitions ==============================
-[homes]
- comment = Home Directories
- browseable = no
- writable = yes
-
-[netdisk]
- comment = Network share on STK1000
- path = /media
- read only = no
- public = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-; comment = Network Logon Service
-; path = /usr/local/samba/lib/netlogon
-; guest ok = yes
-; writable = no
-; share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-; path = /usr/local/samba/profiles
-; browseable = no
-; guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to
-# specifically define each individual printer
-;[printers]
-; comment = All Printers
-; path = /usr/spool/samba
-; browseable = no
-# Set public = yes to allow user 'guest account' to print
-; guest ok = no
-; writable = no
-; printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-; comment = Temporary file space
-; path = /tmp
-; read only = no
-; public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-; comment = Public Stuff
-; path = /home/samba
-; public = yes
-; writable = yes
-; printable = no
-; write list = @staff
-
-# Other examples.
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-; comment = Fred's Printer
-; valid users = fred
-; path = /homes/fred
-; printer = freds_printer
-; public = no
-; writable = no
-; printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-; comment = Fred's Service
-; path = /usr/somewhere/private
-; valid users = fred
-; public = no
-; writable = yes
-; printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %U option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-; comment = PC Directories
-; path = /usr/pc/%m
-; public = no
-; writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-; path = /usr/somewhere/else/public
-; public = yes
-; only guest = yes
-; writable = yes
-; printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-; comment = Mary's and Fred's stuff
-; path = /usr/somewhere/shared
-; valid users = mary fred
-; public = no
-; writable = yes
-; printable = no
-; create mask = 0765
+++ /dev/null
-root:0:172DC9BBE870E1B6AAD3B435B51404EE:090A846DE05FDBC2D90864D49620FD7C:[U ]:LCT-4561C217:
+++ /dev/null
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-#
-# The latest IANA port assignments can be gotten from
-#
-# http://www.iana.org/assignments/port-numbers
-#
-# The Well Known Ports are those from 0 through 1023.
-# The Registered Ports are those from 1024 through 49151
-# The Dynamic and/or Private Ports are those from 49152 through 65535
-#
-# Kerberos services are for Kerberos v4, and are unofficial. Sites running
-# v5 should uncomment v5 entries and comment v4 entries.
-#
-# $FreeBSD: src/etc/services,v 1.102.8.1 2006/01/29 11:32:48 maxim Exp $
-# From: @(#)services 5.8 (Berkeley) 5/9/91
-#
-# WELL KNOWN PORT NUMBERS
-#
-rtmp 1/ddp #Routing Table Maintenance Protocol
-tcpmux 1/tcp #TCP Port Service Multiplexer
-tcpmux 1/udp #TCP Port Service Multiplexer
-nbp 2/ddp #Name Binding Protocol
-compressnet 2/tcp #Management Utility
-compressnet 2/udp #Management Utility
-compressnet 3/tcp #Compression Process
-compressnet 3/udp #Compression Process
-echo 4/ddp #AppleTalk Echo Protocol
-rje 5/tcp #Remote Job Entry
-rje 5/udp #Remote Job Entry
-zip 6/ddp #Zone Information Protocol
-echo 7/tcp
-echo 7/udp
-discard 9/tcp sink null
-discard 9/udp sink null
-systat 11/tcp users #Active Users
-systat 11/udp users #Active Users
-daytime 13/tcp
-daytime 13/udp
-qotd 17/tcp quote #Quote of the Day
-qotd 17/udp quote #Quote of the Day
-msp 18/tcp #Message Send Protocol
-msp 18/udp #Message Send Protocol
-chargen 19/tcp ttytst source #Character Generator
-chargen 19/udp ttytst source #Character Generator
-ftp-data 20/tcp #File Transfer [Default Data]
-ftp-data 20/udp #File Transfer [Default Data]
-ftp 21/tcp #File Transfer [Control]
-ftp 21/udp #File Transfer [Control]
-ssh 22/tcp #Secure Shell Login
-ssh 22/udp #Secure Shell Login
-telnet 23/tcp
-telnet 23/udp
-# 24/tcp any private mail system
-# 24/udp any private mail system
-smtp 25/tcp mail #Simple Mail Transfer
-smtp 25/udp mail #Simple Mail Transfer
-nsw-fe 27/tcp #NSW User System FE
-nsw-fe 27/udp #NSW User System FE
-msg-icp 29/tcp #MSG ICP
-msg-icp 29/udp #MSG ICP
-msg-auth 31/tcp #MSG Authentication
-msg-auth 31/udp #MSG Authentication
-dsp 33/tcp #Display Support Protocol
-dsp 33/udp #Display Support Protocol
-# 35/tcp any private printer server
-# 35/udp any private printer server
-time 37/tcp timserver
-time 37/udp timserver
-rap 38/tcp #Route Access Protocol
-rap 38/udp #Route Access Protocol
-rlp 39/tcp resource #Resource Location Protocol
-rlp 39/udp resource #Resource Location Protocol
-graphics 41/tcp
-graphics 41/udp
-nameserver 42/tcp name #Host Name Server
-nameserver 42/udp name #Host Name Server
-nicname 43/tcp whois
-nicname 43/udp whois
-mpm-flags 44/tcp #MPM FLAGS Protocol
-mpm-flags 44/udp #MPM FLAGS Protocol
-mpm 45/tcp #Message Processing Module [recv]
-mpm 45/udp #Message Processing Module [recv]
-mpm-snd 46/tcp #MPM [default send]
-mpm-snd 46/udp #MPM [default send]
-ni-ftp 47/tcp #NI FTP
-ni-ftp 47/udp #NI FTP
-auditd 48/tcp #Digital Audit Daemon
-auditd 48/udp #Digital Audit Daemon
-tacacs 49/tcp #Login Host Protocol (TACACS)
-tacacs 49/udp #Login Host Protocol (TACACS)
-re-mail-ck 50/tcp #Remote Mail Checking Protocol
-re-mail-ck 50/udp #Remote Mail Checking Protocol
-la-maint 51/tcp #IMP Logical Address Maintenance
-la-maint 51/udp #IMP Logical Address Maintenance
-xns-time 52/tcp #XNS Time Protocol
-xns-time 52/udp #XNS Time Protocol
-domain 53/tcp #Domain Name Server
-domain 53/udp #Domain Name Server
-xns-ch 54/tcp #XNS Clearinghouse
-xns-ch 54/udp #XNS Clearinghouse
-isi-gl 55/tcp #ISI Graphics Language
-isi-gl 55/udp #ISI Graphics Language
-xns-auth 56/tcp #XNS Authentication
-xns-auth 56/udp #XNS Authentication
-mtp 57/tcp # deprecated
-#PROBLEMS!==============================================================
-# 57/tcp any private terminal access
-#PROBLEMS!==============================================================
-# 57/udp any private terminal access
-xns-mail 58/tcp #XNS Mail
-xns-mail 58/udp #XNS Mail
-# 59/tcp any private file service
-# 59/udp any private file service
-ni-mail 61/tcp #NI MAIL
-ni-mail 61/udp #NI MAIL
-acas 62/tcp #ACA Services
-acas 62/udp #ACA Services
-whois++ 63/tcp
-whois++ 63/udp
-covia 64/tcp #Communications Integrator (CI)
-covia 64/udp #Communications Integrator (CI)
-tacacs-ds 65/tcp #TACACS-Database Service
-tacacs-ds 65/udp #TACACS-Database Service
-sql*net 66/tcp #Oracle SQL*NET
-sql*net 66/udp #Oracle SQL*NET
-bootps 67/tcp dhcps #Bootstrap Protocol Server
-bootps 67/udp dhcps #Bootstrap Protocol Server
-bootpc 68/tcp dhcpc #Bootstrap Protocol Client
-bootpc 68/udp dhcpc #Bootstrap Protocol Client
-tftp 69/tcp #Trivial File Transfer
-tftp 69/udp #Trivial File Transfer
-gopher 70/tcp
-gopher 70/udp
-netrjs-1 71/tcp #Remote Job Service
-netrjs-1 71/udp #Remote Job Service
-netrjs-2 72/tcp #Remote Job Service
-netrjs-2 72/udp #Remote Job Service
-netrjs-3 73/tcp #Remote Job Service
-netrjs-3 73/udp #Remote Job Service
-netrjs-4 74/tcp #Remote Job Service
-netrjs-4 74/udp #Remote Job Service
-# 75/tcp any private dial out service
-# 75/udp any private dial out service
-deos 76/tcp #Distributed External Object Store
-deos 76/udp #Distributed External Object Store
-netrjs 77/tcp
-#PROBLEMS!==============================================================
-# 77/tcp any private RJE service
-#PROBLEMS!==============================================================
-# 77/udp any private RJE service
-vettcp 78/tcp
-vettcp 78/udp
-finger 79/tcp
-finger 79/udp
-http 80/tcp www www-http #World Wide Web HTTP
-http 80/udp www www-http #World Wide Web HTTP
-hosts2-ns 81/tcp #HOSTS2 Name Server
-hosts2-ns 81/udp #HOSTS2 Name Server
-xfer 82/tcp #XFER Utility
-xfer 82/udp #XFER Utility
-mit-ml-dev 83/tcp #MIT ML Device
-mit-ml-dev 83/udp #MIT ML Device
-ctf 84/tcp #Common Trace Facility
-ctf 84/udp #Common Trace Facility
-mit-ml-dev 85/tcp #MIT ML Device
-mit-ml-dev 85/udp #MIT ML Device
-mfcobol 86/tcp #Micro Focus Cobol
-mfcobol 86/udp #Micro Focus Cobol
-ttylink 87/tcp
-#PROBLEMS!===========================================================
-# 87/tcp any private terminal link
-#PROBLEMS!===========================================================
-# 87/udp any private terminal link
-kerberos-sec 88/tcp kerberos # krb5 # Kerberos (v5)
-kerberos-sec 88/udp kerberos # krb5 # Kerberos (v5)
-su-mit-tg 89/tcp #SU/MIT Telnet Gateway
-su-mit-tg 89/udp #SU/MIT Telnet Gateway
-dnsix 90/tcp #DNSIX Securit Attribute Token Map
-dnsix 90/udp #DNSIX Securit Attribute Token Map
-mit-dov 91/tcp #MIT Dover Spooler
-mit-dov 91/udp #MIT Dover Spooler
-npp 92/tcp #Network Printing Protocol
-npp 92/udp #Network Printing Protocol
-dcp 93/tcp #Device Control Protocol
-dcp 93/udp #Device Control Protocol
-objcall 94/tcp #Tivoli Object Dispatcher
-objcall 94/udp #Tivoli Object Dispatcher
-supdup 95/tcp
-supdup 95/udp
-dixie 96/tcp #DIXIE Protocol Specification
-dixie 96/udp #DIXIE Protocol Specification
-swift-rvf 97/tcp #Swift Remote Virtural File Protocol
-swift-rvf 97/udp #Swift Remote Virtural File Protocol
-tacnews 98/tcp #TAC News, Unofficial: Red Hat linuxconf
-tacnews 98/udp #TAC News, Unofficial: Red Hat linuxconf
-metagram 99/tcp #Metagram Relay
-metagram 99/udp #Metagram Relay
-newacct 100/tcp #[unauthorized use]
-hostname 101/tcp hostnames #NIC Host Name Server
-hostname 101/udp hostnames #NIC Host Name Server
-iso-tsap 102/tcp tsap #ISO-TSAP Class 0
-iso-tsap 102/udp tsap #ISO-TSAP Class 0
-gppitnp 103/tcp #Genesis Point-to-Point Trans Net
-gppitnp 103/udp #Genesis Point-to-Point Trans Net
-acr-nema 104/tcp #ACR-NEMA Digital Imag. & Comm. 300
-acr-nema 104/udp #ACR-NEMA Digital Imag. & Comm. 300
-csnet-ns 105/tcp cso-ns cso #Mailbox Name Nameserver
-csnet-ns 105/udp cso-ns cso #Mailbox Name Nameserver
-pop3pw 106/tcp 3com-tsmux #Eudora compatible PW changer
-3com-tsmux 106/udp
-rtelnet 107/tcp #Remote Telnet Service
-rtelnet 107/udp #Remote Telnet Service
-snagas 108/tcp #SNA Gateway Access Server
-snagas 108/udp #SNA Gateway Access Server
-pop2 109/tcp postoffice #Post Office Protocol - Version 2
-pop2 109/udp postoffice #Post Office Protocol - Version 2
-pop3 110/tcp #Post Office Protocol - Version 3
-pop3 110/udp #Post Office Protocol - Version 3
-sunrpc 111/tcp rpcbind #SUN Remote Procedure Call
-sunrpc 111/udp rpcbind #SUN Remote Procedure Call
-mcidas 112/tcp #McIDAS Data Transmission Protocol
-mcidas 112/udp #McIDAS Data Transmission Protocol
-auth 113/tcp ident tap #Authentication Service
-auth 113/udp ident tap #Authentication Service
-audionews 114/tcp #Audio News Multicast
-audionews 114/udp #Audio News Multicast
-sftp 115/tcp #Simple File Transfer Protocol
-sftp 115/udp #Simple File Transfer Protocol
-ansanotify 116/tcp #ANSA REX Notify
-ansanotify 116/udp #ANSA REX Notify
-uucp-path 117/tcp #UUCP Path Service
-uucp-path 117/udp #UUCP Path Service
-sqlserv 118/tcp #SQL Services
-sqlserv 118/udp #SQL Services
-nntp 119/tcp usenet #Network News Transfer Protocol
-nntp 119/udp usenet #Network News Transfer Protocol
-cfdptkt 120/tcp
-cfdptkt 120/udp
-erpc 121/tcp #Encore Expedited Remote Pro.Call
-erpc 121/udp #Encore Expedited Remote Pro.Call
-smakynet 122/tcp
-smakynet 122/udp
-ntp 123/tcp #Network Time Protocol
-ntp 123/udp #Network Time Protocol
-ansatrader 124/tcp #ANSA REX Trader
-ansatrader 124/udp #ANSA REX Trader
-locus-map 125/tcp #Locus PC-Interface Net Map Ser
-locus-map 125/udp #Locus PC-Interface Net Map Ser
-unitary 126/tcp #Unisys Unitary Login
-unitary 126/udp #Unisys Unitary Login
-locus-con 127/tcp #Locus PC-Interface Conn Server
-locus-con 127/udp #Locus PC-Interface Conn Server
-gss-xlicen 128/tcp #GSS X License Verification
-gss-xlicen 128/udp #GSS X License Verification
-pwdgen 129/tcp #Password Generator Protocol
-pwdgen 129/udp #Password Generator Protocol
-cisco-fna 130/tcp #cisco FNATIVE
-cisco-fna 130/udp #cisco FNATIVE
-cisco-tna 131/tcp #cisco TNATIVE
-cisco-tna 131/udp #cisco TNATIVE
-cisco-sys 132/tcp #cisco SYSMAINT
-cisco-sys 132/udp #cisco SYSMAINT
-statsrv 133/tcp #Statistics Service
-statsrv 133/udp #Statistics Service
-ingres-net 134/tcp #INGRES-NET Service
-ingres-net 134/udp #INGRES-NET Service
-loc-srv 135/tcp epmap #Location Service
-loc-srv 135/udp epmap #Location Service
-profile 136/tcp #PROFILE Naming System
-profile 136/udp #PROFILE Naming System
-netbios-ns 137/tcp #NETBIOS Name Service
-netbios-ns 137/udp #NETBIOS Name Service
-netbios-dgm 138/tcp #NETBIOS Datagram Service
-netbios-dgm 138/udp #NETBIOS Datagram Service
-netbios-ssn 139/tcp #NETBIOS Session Service
-netbios-ssn 139/udp #NETBIOS Session Service
-emfis-data 140/tcp #EMFIS Data Service
-emfis-data 140/udp #EMFIS Data Service
-emfis-cntl 141/tcp #EMFIS Control Service
-emfis-cntl 141/udp #EMFIS Control Service
-bl-idm 142/tcp #Britton-Lee IDM
-bl-idm 142/udp #Britton-Lee IDM
-imap 143/tcp imap2 imap4 #Interim Mail Access Protocol v2
-imap 143/udp imap2 imap4 #Interim Mail Access Protocol v2
-NeWS 144/tcp # Window System
-NeWS 144/udp # Window System
-#PROBLEMS!==============================================================
-#uma 144/tcp #Universal Management Architecture
-#uma 144/udp #Universal Management Architecture
-#PROBLEMS!==============================================================
-uaac 145/tcp #UAAC Protocol
-uaac 145/udp #UAAC Protocol
-iso-tp0 146/tcp
-iso-tp0 146/udp
-iso-ip 147/tcp
-iso-ip 147/udp
-cronus 148/tcp jargon #CRONUS-SUPPORT
-cronus 148/udp jargon #CRONUS-SUPPORT
-aed-512 149/tcp #AED 512 Emulation Service
-aed-512 149/udp #AED 512 Emulation Service
-sql-net 150/tcp
-sql-net 150/udp
-hems 151/tcp
-hems 151/udp
-bftp 152/tcp #Background File Transfer Program
-bftp 152/udp #Background File Transfer Program
-sgmp 153/tcp
-sgmp 153/udp
-netsc-prod 154/tcp
-netsc-prod 154/udp
-netsc-dev 155/tcp
-netsc-dev 155/udp
-sqlsrv 156/tcp #SQL Service
-sqlsrv 156/udp #SQL Service
-knet-cmp 157/tcp #KNET/VM Command/Message Protocol
-knet-cmp 157/udp #KNET/VM Command/Message Protocol
-pcmail-srv 158/tcp #PCMail Server
-pcmail-srv 158/udp #PCMail Server
-nss-routing 159/tcp
-nss-routing 159/udp
-sgmp-traps 160/tcp
-sgmp-traps 160/udp
-snmp 161/tcp
-snmp 161/udp
-snmptrap 162/tcp snmp-trap
-snmptrap 162/udp snmp-trap
-cmip-man 163/tcp #CMIP/TCP Manager
-cmip-man 163/udp #CMIP/TCP Manager
-cmip-agent 164/tcp #CMIP/TCP Agent
-smip-agent 164/udp #CMIP/TCP Agent
-xns-courier 165/tcp #Xerox
-xns-courier 165/udp #Xerox
-s-net 166/tcp #Sirius Systems
-s-net 166/udp #Sirius Systems
-namp 167/tcp
-namp 167/udp
-rsvd 168/tcp
-rsvd 168/udp
-send 169/tcp
-send 169/udp
-print-srv 170/tcp #Network PostScript
-print-srv 170/udp #Network PostScript
-multiplex 171/tcp #Network Innovations Multiplex
-multiplex 171/udp #Network Innovations Multiplex
-cl/1 172/tcp #Network Innovations CL/1
-cl/1 172/udp #Network Innovations CL/1
-xyplex-mux 173/tcp
-xyplex-mux 173/udp
-mailq 174/tcp
-mailq 174/udp
-vmnet 175/tcp
-vmnet 175/udp
-genrad-mux 176/tcp
-genrad-mux 176/udp
-xdmcp 177/tcp #X Display Manager Control Protocol
-xdmcp 177/udp #X Display Manager Control Protocol
-NextStep 178/tcp nextstep NeXTStep #NextStep Window Server
-NextStep 178/udp nextstep NeXTStep #NextStep Window Server
-bgp 179/tcp #Border Gateway Protocol
-bgp 179/udp #Border Gateway Protocol
-ris 180/tcp #Intergraph
-ris 180/udp #Intergraph
-unify 181/tcp
-unify 181/udp
-audit 182/tcp #Unisys Audit SITP
-audit 182/udp #Unisys Audit SITP
-ocbinder 183/tcp
-ocbinder 183/udp
-ocserver 184/tcp
-ocserver 184/udp
-remote-kis 185/tcp
-remote-kis 185/udp
-kis 186/tcp #KIS Protocol
-kis 186/udp #KIS Protocol
-aci 187/tcp #Application Communication Interface
-aci 187/udp #Application Communication Interface
-mumps 188/tcp #Plus Five's MUMPS
-mumps 188/udp #Plus Five's MUMPS
-qft 189/tcp #Queued File Transport
-qft 189/udp #Queued File Transport
-gacp 190/tcp #Gateway Access Control Protocol
-gacp 190/udp cacp #Gateway Access Control Protocol
-prospero 191/tcp #Prospero Directory Service
-prospero 191/udp #Prospero Directory Service
-osu-nms 192/tcp #OSU Network Monitoring System
-osu-nms 192/udp #OSU Network Monitoring System
-srmp 193/tcp #Spider Remote Monitoring Protocol
-srmp 193/udp #Spider Remote Monitoring Protocol
-irc 194/tcp #Internet Relay Chat Protocol
-irc 194/udp #Internet Relay Chat Protocol
-dn6-nlm-aud 195/tcp #DNSIX Network Level Module Audit
-dn6-nlm-aud 195/udp #DNSIX Network Level Module Audit
-dn6-smm-red 196/tcp #DNSIX Session Mgt Module Audit Redir
-dn6-smm-red 196/udp #DNSIX Session Mgt Module Audit Redir
-dls 197/tcp #Directory Location Service
-dls 197/udp #Directory Location Service
-dls-mon 198/tcp #Directory Location Service Monitor
-dls-mon 198/udp #Directory Location Service Monitor
-smux 199/tcp
-smux 199/udp
-src 200/tcp #IBM System Resource Controller
-src 200/udp #IBM System Resource Controller
-at-rtmp 201/tcp #AppleTalk Routing Maintenance
-at-rtmp 201/udp #AppleTalk Routing Maintenance
-at-nbp 202/tcp #AppleTalk Name Binding
-at-nbp 202/udp #AppleTalk Name Binding
-at-3 203/tcp #AppleTalk Unused
-at-3 203/udp #AppleTalk Unused
-at-echo 204/tcp #AppleTalk Echo
-at-echo 204/udp #AppleTalk Echo
-at-5 205/tcp #AppleTalk Unused
-at-5 205/udp #AppleTalk Unused
-at-zis 206/tcp #AppleTalk Zone Information
-at-zis 206/udp #AppleTalk Zone Information
-at-7 207/tcp #AppleTalk Unused
-at-7 207/udp #AppleTalk Unused
-at-8 208/tcp #AppleTalk Unused
-at-8 208/udp #AppleTalk Unused
-qmtp 209/tcp #The Quick Mail Transfer Protocol
-qmtp 209/udp #The Quick Mail Transfer Protocol
-#PROBLEMS!==============================================================
-#tam 209/tcp #Trivial Authenticated Mail Protocol
-#tam 209/udp #Trivial Authenticated Mail Protocol
-#PROBLEMS!==============================================================
-z39.50 210/tcp wais #ANSI Z39.50
-z39.50 210/udp wais #ANSI Z39.50
-914c/g 211/tcp #Texas Instruments 914C/G Terminal
-914c/g 211/udp #Texas Instruments 914C/G Terminal
-anet 212/tcp #ATEXSSTR
-anet 212/udp #ATEXSSTR
-ipx 213/tcp
-ipx 213/udp
-vmpwscs 214/tcp
-vmpwscs 214/udp
-softpc 215/tcp #Insignia Solutions
-softpc 215/udp #Insignia Solutions
-CAIlic 216/tcp atls #Computer Associates Int'l License Server
-CAIlic 216/udp atls #Computer Associates Int'l License Server
-dbase 217/tcp #dBASE Unix
-dbase 217/udp #dBASE Unix
-mpp 218/tcp #Netix Message Posting Protocol
-mpp 218/udp #Netix Message Posting Protocol
-uarps 219/tcp #Unisys ARPs
-uarps 219/udp #Unisys ARPs
-#imap3@220 was never used and never should have been allocated. See PR 46294.
-#imap3 220/tcp #Interactive Mail Access Protocol v3
-#imap3 220/udp #Interactive Mail Access Protocol v3
-fln-spx 221/tcp #Berkeley rlogind with SPX auth
-fln-spx 221/udp #Berkeley rlogind with SPX auth
-rsh-spx 222/tcp #Berkeley rshd with SPX auth
-rsh-spx 222/udp #Berkeley rshd with SPX auth
-cdc 223/tcp #Certificate Distribution Center
-cdc 223/udp #Certificate Distribution Center
-direct 242/tcp
-direct 242/udp
-sur-meas 243/tcp #Survey Measurement
-sur-meas 243/udp #Survey Measurement
-dayna 244/tcp
-dayna 244/udp
-link 245/tcp
-link 245/udp
-dsp3270 246/tcp #Display Systems Protocol
-dsp3270 246/udp #Display Systems Protocol
-subntbcst_tftp 247/tcp #subntbcst_tftp
-subntbcst_tftp 247/udp #subntbcst_tftp
-bhfhs 248/tcp
-bhfhs 248/udp
-# 249-255 reserved
-rap 256/tcp
-rap 256/udp
-set 257/tcp #secure electronic transaction
-set 257/udp #secure electronic transaction
-yak-chat 258/tcp #yak winsock personal chat
-yak-chat 258/udp #yak winsock personal chat
-esro-gen 259/tcp #efficient short remote operations
-esro-gen 259/udp #efficient short remote operations
-openport 260/tcp
-openport 260/udp
-nsiiops 261/tcp #iiop name service over tls/ssl
-nsiiops 261/udp #iiop name service over tls/ssl
-arcisdms 262/tcp
-arcisdms 262/udp
-hdap 263/tcp
-hdap 263/udp
-bgmp 264/tcp
-bgmp 264/udp
-# 265-279 unassigned
-http-mgmt 280/tcp
-http-mgmt 280/udp
-personal-link 281/tcp
-personal-link 281/udp
-cableport-ax 282/tcp #cable port a/x
-cableport-ax 282/udp #cable port a/x
-# 283-307 unassigned
-novastorbakcup 308/tcp #novastor backup
-novastorbakcup 308/udp #novastor backup
-entrusttime 309/tcp
-entrusttime 309/udp
-bhmds 310/tcp
-bhmds 310/udp
-asip-webadmin 311/tcp #appleshare ip webadmin
-asip-webadmin 311/udp #appleshare ip webadmin
-vslmp 312/tcp
-vslmp 312/udp
-magenta-logic 313/tcp
-magenta-logic 313/udp
-opalis-robot 314/tcp
-opalis-robot 314/udp
-dpsi 315/tcp
-dpsi 315/udp
-decauth 316/tcp
-decauth 316/udp
-zannet 317/tcp
-zannet 317/udp
-# 318-320 #unassigned
-pip 321/tcp
-pip 321/udp
-# 322-343 #unassigned
-pdap 344/tcp #Prospero Data Access Protocol
-pdap 344/udp #Prospero Data Access Protocol
-pawserv 345/tcp #Perf Analysis Workbench
-pawserv 345/udp #Perf Analysis Workbench
-zserv 346/tcp #Zebra server
-zserv 346/udp #Zebra server
-fatserv 347/tcp #Fatmen Server
-fatserv 347/udp #Fatmen Server
-csi-sgwp 348/tcp #Cabletron Management Protocol
-csi-sgwp 348/udp #Cabletron Management Protocol
-mftp 349/tcp
-mftp 349/udp
-matip-type-a 350/tcp #MATIP Type A
-matip-type-a 350/udp
-matip-type-b 351/tcp #MATIP Type B
-matip-type-b 351/udp
-bhoetty 351/tcp #unassigned but widespread use
-bhoetty 351/udp #unassigned but widespread use
-dtag-ste-sb 352/tcp #DTAG
-dtag-ste-sb 352/udp #DTAG
-bhoedap4 352/tcp #unassigned but widespread use
-bhoedap4 352/udp #unassigned but widespread use
-ndsauth 353/tcp
-ndsauth 353/udp
-bh611 354/tcp
-bh611 354/udp
-datex-asn 355/tcp
-datex-asn 355/udp
-cloanto-net-1 356/tcp #Cloanto Net 1
-cloanto-net-1 356/udp
-bhevent 357/tcp
-bhevent 357/udp
-shrinkwrap 358/tcp
-shrinkwrap 358/udp
-tenebris_nts 359/tcp #Tenebris Network Trace Service
-tenebris_nts 359/udp #Tenebris Network Trace Service
-scoi2odialog 360/tcp
-scoi2odialog 360/udp
-semantix 361/tcp
-semantix 361/udp
-srssend 362/tcp #SRS Send
-srssend 362/udp #SRS Send
-rsvp_tunnel 363/tcp
-rsvp_tunnel 363/udp
-aurora-cmgr 364/tcp
-aurora-cmgr 364/udp
-dtk 365/tcp #Deception Tool Kit - Fred Cohen <fc@all.net>
-dtk 365/udp #Deception Tool Kit - Fred Cohen <fc@all.net>
-odmr 366/tcp
-odmr 366/udp
-mortgageware 367/tcp
-mortgageware 367/udp
-qbikgdp 368/tcp #QbikGDP
-qbikgdp 368/udp
-rpc2portmap 369/tcp
-rpc2portmap 369/udp
-codaauth2 370/tcp
-codaauth2 370/udp
-clearcase 371/tcp
-clearcase 371/udp
-ulistserv 372/tcp ulistproc #Unix Listserv
-ulistserv 372/udp ulistproc #Unix Listserv
-legent-1 373/tcp #Legent Corporation (now Computer Associates Intl.)
-legent-1 373/udp #Legent Corporation (now Computer Associates Intl.)
-legent-2 374/tcp #Legent Corporation (now Computer Associates Intl.)
-legent-2 374/udp #Legent Corporation (now Computer Associates Intl.)
-hassle 375/tcp
-hassle 375/udp
-nip 376/tcp #Amiga Envoy Network Inquiry Proto
-nip 376/udp #Amiga Envoy Network Inquiry Proto
-tnETOS 377/tcp #NEC Corporation
-tnETOS 377/udp #NEC Corporation
-dsETOS 378/tcp #NEC Corporation
-dsETOS 378/udp #NEC Corporation
-is99c 379/tcp #TIA/EIA/IS-99 modem client
-is99c 379/udp #TIA/EIA/IS-99 modem client
-is99s 380/tcp #TIA/EIA/IS-99 modem server
-is99s 380/udp #TIA/EIA/IS-99 modem server
-hp-collector 381/tcp #hp performance data collector
-hp-collector 381/udp #hp performance data collector
-hp-managed-node 382/tcp #hp performance data managed node
-hp-managed-node 382/udp #hp performance data managed node
-hp-alarm-mgr 383/tcp #hp performance data alarm manager
-hp-alarm-mgr 383/udp #hp performance data alarm manager
-arns 384/tcp #A Remote Network Server System
-arns 384/udp #A Remote Network Server System
-ibm-app 385/tcp #IBM Application
-ibm-app 385/udp #IBM Application
-asa 386/tcp #ASA Message Router Object Def.
-asa 386/udp #ASA Message Router Object Def.
-aurp 387/tcp #Appletalk Update-Based Routing Pro.
-aurp 387/udp #Appletalk Update-Based Routing Pro.
-unidata-ldm 388/tcp #Unidata LDM Version 4
-unidata-ldm 388/udp #Unidata LDM Version 4
-ldap 389/tcp #Lightweight Directory Access Protocol
-ldap 389/udp #Lightweight Directory Access Protocol
-uis 390/tcp
-uis 390/udp
-synotics-relay 391/tcp #SynOptics SNMP Relay Port
-synotics-relay 391/udp #SynOptics SNMP Relay Port
-synotics-broker 392/tcp #SynOptics Port Broker Port
-synotics-broker 392/udp #SynOptics Port Broker Port
-dis 393/tcp #Data Interpretation System
-dis 393/udp #Data Interpretation System
-embl-ndt 394/tcp #EMBL Nucleic Data Transfer
-embl-ndt 394/udp #EMBL Nucleic Data Transfer
-netcp 395/tcp #NETscout Control Protocol
-netcp 395/udp #NETscout Control Protocol
-netware-ip 396/tcp #Novell Netware over IP
-netware-ip 396/udp #Novell Netware over IP
-mptn 397/tcp #Multi Protocol Trans. Net.
-mptn 397/udp #Multi Protocol Trans. Net.
-kryptolan 398/tcp
-kryptolan 398/udp
-iso-tsap-c2 399/tcp #ISO-TSAP Class 2
-iso-tsap-c2 399/udp #ISO-TSAP Class 2
-work-sol 400/tcp #Workstation Solutions
-work-sol 400/udp #Workstation Solutions
-ups 401/tcp #Uninterruptible Power Supply
-ups 401/udp #Uninterruptible Power Supply
-genie 402/tcp #Genie Protocol
-genie 402/udp #Genie Protocol
-decap 403/tcp
-decap 403/udp
-nced 404/tcp
-nced 404/udp
-ncld 405/tcp
-ncld 405/udp
-imsp 406/tcp #Interactive Mail Support Protocol
-imsp 406/udp #Interactive Mail Support Protocol
-timbuktu 407/tcp
-timbuktu 407/udp
-prm-sm 408/tcp #Prospero Resource Manager Sys. Man.
-prm-sm 408/udp #Prospero Resource Manager Sys. Man.
-prm-nm 409/tcp #Prospero Resource Manager Node Man.
-prm-nm 409/udp #Prospero Resource Manager Node Man.
-decladebug 410/tcp #DECLadebug Remote Debug Protocol
-decladebug 410/udp #DECLadebug Remote Debug Protocol
-rmt 411/tcp #Remote MT Protocol
-rmt 411/udp #Remote MT Protocol
-synoptics-trap 412/tcp #Trap Convention Port
-synoptics-trap 412/udp #Trap Convention Port
-smsp 413/tcp
-smsp 413/udp
-infoseek 414/tcp
-infoseek 414/udp
-bnet 415/tcp
-bnet 415/udp
-silverplatter 416/tcp
-silverplatter 416/udp
-onmux 417/tcp
-onmux 417/udp
-hyper-g 418/tcp
-hyper-g 418/udp
-ariel1 419/tcp
-ariel1 419/udp
-smpte 420/tcp
-smpte 420/udp
-ariel2 421/tcp
-ariel2 421/udp
-ariel3 422/tcp
-ariel3 422/udp
-opc-job-start 423/tcp #IBM Operations Planning and Control Start
-opc-job-start 423/udp #IBM Operations Planning and Control Start
-opc-job-track 424/tcp #IBM Operations Planning and Control Track
-opc-job-track 424/udp #IBM Operations Planning and Control Track
-icad-el 425/tcp
-icad-el 425/udp
-smartsdp 426/tcp
-smartsdp 426/udp
-svrloc 427/tcp #Server Location
-svrloc 427/udp #Server Location
-ocs_cmu 428/tcp
-ocs_cmu 428/udp
-ocs_amu 429/tcp
-ocs_amu 429/udp
-utmpsd 430/tcp
-utmpsd 430/udp
-utmpcd 431/tcp
-utmpcd 431/udp
-iasd 432/tcp
-iasd 432/udp
-nnsp 433/tcp
-nnsp 433/udp
-mobileip-agent 434/tcp
-mobileip-agent 434/udp
-mobilip-mn 435/tcp
-mobilip-mn 435/udp
-dna-cml 436/tcp
-dna-cml 436/udp
-comscm 437/tcp
-comscm 437/udp
-dsfgw 438/tcp
-dsfgw 438/udp
-dasp 439/tcp
-dasp 439/udp
-sgcp 440/tcp
-sgcp 440/udp
-decvms-sysmgt 441/tcp
-decvms-sysmgt 441/udp
-cvc_hostd 442/tcp
-cvc_hostd 442/udp
-https 443/tcp
-https 443/udp
-snpp 444/tcp #Simple Network Paging Protocol
-snpp 444/udp #Simple Network Paging Protocol
-# [RFC1568]
-microsoft-ds 445/tcp
-microsoft-ds 445/udp
-ddm-rdb 446/tcp
-ddm-rdb 446/udp
-ddm-dfm 447/tcp
-ddm-dfm 447/udp
-ddm-ssl 448/tcp ddm-byte
-ddm-ssl 448/udp ddm-byte
-as-servermap 449/tcp #AS Server Mapper
-as-servermap 449/udp #AS Server Mapper
-tserver 450/tcp
-tserver 450/udp
-sfs-smp-net 451/tcp #Cray Network Semaphore server
-sfs-smp-net 451/udp #Cray Network Semaphore server
-sfs-config 452/tcp #Cray SFS config server
-sfs-config 452/udp #Cray SFS config server
-creativeserver 453/tcp #CreativeServer
-creativeserver 453/udp #CreativeServer
-contentserver 454/tcp #ContentServer
-contentserver 454/udp #ContentServer
-creativepartnr 455/tcp #CreativePartnr
-creativepartnr 455/udp #CreativePartnr
-macon-tcp 456/tcp
-macon-udp 456/udp
-scohelp 457/tcp
-scohelp 457/udp
-appleqtc 458/tcp #apple quick time
-appleqtc 458/udp #apple quick time
-ampr-rcmd 459/tcp
-ampr-rcmd 459/udp
-skronk 460/tcp
-skronk 460/udp
-datasurfsrv 461/tcp
-datasurfsrv 461/udp
-datasurfsrvsec 462/tcp
-datasurfsrvsec 462/udp
-alpes 463/tcp
-alpes 463/udp
-#
-kpasswd5 464/tcp # Kerberos (v5)
-kpasswd5 464/udp # Kerberos (v5)
-#PROBLEMS!==============================================================
-# IANA has offically assigned these two ports as ``kpasswd''
-#kpasswd 464/tcp # Kerberos (v5)
-#kpasswd 464/udp # Kerberos (v5)
-#PROBLEMS!==============================================================
-smtps 465/tcp #smtp protocol over TLS/SSL (was ssmtp)
-smtps 465/udp #smtp protocol over TLS/SSL (was ssmtp)
-digital-vrc 466/tcp
-digital-vrc 466/udp
-mylex-mapd 467/tcp
-mylex-mapd 467/udp
-photuris 468/tcp
-photuris 468/udp
-rcp 469/tcp #Radio Control Protocol
-rcp 469/udp #Radio Control Protocol
-scx-proxy 470/tcp
-scx-proxy 470/udp
-mondex 471/tcp
-mondex 471/udp
-ljk-login 472/tcp
-ljk-login 472/udp
-hybrid-pop 473/tcp
-hybrid-pop 473/udp
-tn-tl-w1 474/tcp
-tn-tl-w2 474/udp
-tcpnethaspsrv 475/tcp
-tcpnethaspsrv 475/udp
-tn-tl-fd1 476/tcp
-tn-tl-fd1 476/udp
-ss7ns 477/tcp
-ss7ns 477/udp
-spsc 478/tcp
-spsc 478/udp
-iafserver 479/tcp
-iafserver 479/udp
-iafdbase 480/tcp
-iafdbase 480/udp
-ph 481/tcp
-ph 481/udp
-bgs-nsi 482/tcp
-bgs-nsi 482/udp
-ulpnet 483/tcp
-ulpnet 483/udp
-integra-sme 484/tcp #Integra Software Management Environment
-integra-sme 484/udp #Integra Software Management Environment
-powerburst 485/tcp #Air Soft Power Burst
-powerburst 485/udp #Air Soft Power Burst
-avian 486/tcp
-avian 486/udp
-saft 487/tcp #saft Simple Asynchronous File Transfer
-saft 487/udp #saft Simple Asynchronous File Transfer
-gss-http 488/tcp
-gss-http 488/udp
-nest-protocol 489/tcp
-nest-protocol 489/udp
-micom-pfs 490/tcp
-micom-pfs 490/udp
-go-login 491/tcp
-go-login 491/udp
-ticf-1 492/tcp #Transport Independent Convergence for FNA
-ticf-1 492/udp #Transport Independent Convergence for FNA
-ticf-2 493/tcp #Transport Independent Convergence for FNA
-ticf-2 493/udp #Transport Independent Convergence for FNA
-pov-ray 494/tcp
-pov-ray 494/udp
-intecourier 495/tcp
-intecourier 495/udp
-pim-rp-disc 496/tcp
-pim-rp-disc 496/udp
-dantz 497/tcp
-dantz 497/udp
-siam 498/tcp
-siam 498/udp
-iso-ill 499/tcp #ISO ILL Protocol
-iso-ill 499/udp #ISO ILL Protocol
-isakmp 500/tcp
-isakmp 500/udp
-stmf 501/tcp
-stmf 501/udp
-asa-appl-proto 502/tcp
-asa-appl-proto 502/udp
-intrinsa 503/tcp
-intrinsa 503/udp
-citadel 504/tcp
-citadel 504/udp
-mailbox-lm 505/tcp
-mailbox-lm 505/udp
-ohimsrv 506/tcp
-ohimsrv 506/udp
-crs 507/tcp
-crs 507/udp
-xvttp 508/tcp
-xvttp 508/udp
-snare 509/tcp
-snare 509/udp
-fcp 510/tcp #FirstClass Protocol
-fcp 510/udp #FirstClass Protocol
-passgo 511/tcp
-passgo 511/udp
-#
-# Berkeley-specific services
-#
-exec 512/tcp #remote process execution;
-# authentication performed using
-# passwords and UNIX login names
-biff 512/udp comsat #used by mail system to notify users
-# of new mail received; currently
-# receives messages only from
-# processes on the same machine
-login 513/tcp #remote login a la telnet;
-# automatic authentication performed
-# based on priviledged port numbers
-# and distributed data bases which
-# identify "authentication domains"
-who 513/udp whod #maintains data bases showing who's
-# logged in to machines on a local
-# net and the load average of the
-# machine
-shell 514/tcp cmd #like exec, but automatic
-# authentication is performed as for
-# login server
-syslog 514/udp
-printer 515/tcp spooler
-printer 515/udp spooler
-videotex 516/tcp
-videotex 516/udp
-talk 517/tcp #like tenex link, but across
-# machine - unfortunately, doesn't
-# use link protocol (this is actually
-# just a rendezvous port from which a
-# tcp connection is established)
-talk 517/udp #like tenex link, but across
-# machine - unfortunately, doesn't
-# use link protocol (this is actually
-# just a rendezvous port from which a
-# tcp connection is established)
-ntalk 518/tcp
-ntalk 518/udp
-utime 519/tcp unixtime
-utime 519/udp unixtime
-efs 520/tcp #extended file name server
-router 520/udp route routed #local routing process (on site);
-# uses variant of Xerox NS routing
-# information protocol
-ripng 521/tcp
-ripng 521/udp
-ulp 522/tcp
-ulp 522/udp
-ibm-db2 523/tcp
-ibm-db2 523/udp
-ncp 524/tcp
-ncp 524/udp
-timed 525/tcp timeserver
-timed 525/udp timeserver
-tempo 526/tcp newdate
-tempo 526/udp newdate
-stx 527/tcp #Stock IXChange
-stx 527/udp #Stock IXChange
-custix 528/tcp #Customer IXChange
-custix 528/udp #Customer IXChange
-irc-serv 529/tcp
-irc-serv 529/udp
-courier 530/tcp rpc
-courier 530/udp rpc
-conference 531/tcp chat
-conference 531/udp chat
-netnews 532/tcp readnews
-netnews 532/udp readnews
-netwall 533/tcp #for emergency broadcasts
-netwall 533/udp #for emergency broadcasts
-mm-admin 534/tcp #MegaMedia Admin
-mm-admin 534/udp #MegaMedia Admin
-iiop 535/tcp
-iiop 535/udp
-opalis-rdv 536/tcp
-opalis-rdv 536/udp
-nmsp 537/tcp #Networked Media Streaming Protocol
-nmsp 537/udp #Networked Media Streaming Protocol
-gdomap 538/tcp
-gdomap 538/udp
-apertus-ldp 539/tcp #Apertus Technologies Load Determination
-apertus-ldp 539/udp #Apertus Technologies Load Determination
-uucp 540/tcp uucpd
-uucp 540/udp uucpd
-uucp-rlogin 541/tcp
-uucp-rlogin 541/udp
-commerce 542/tcp
-commerce 542/udp
-klogin 543/tcp # Kerberos (v4/v5)
-klogin 543/udp # Kerberos (v4/v5)
-kshell 544/tcp krcmd # Kerberos (v4/v5)
-kshell 544/udp krcmd # Kerberos (v4/v5)
-appleqtcsrvr 545/tcp
-appleqtcsrvr 545/udp
-dhcpv6-client 546/tcp #DHCPv6 Client
-dhcpv6-client 546/udp #DHCPv6 Client
-dhcpv6-server 547/tcp #DHCPv6 Server
-dhcpv6-server 547/udp #DHCPv6 Server
-afpovertcp 548/tcp #AFP over TCP
-afpovertcp 548/udp #AFP over TCP
-idfp 549/tcp
-idfp 549/udp
-new-rwho 550/tcp new-who
-new-rwho 550/udp new-who
-cybercash 551/tcp
-cybercash 551/udp
-deviceshare 552/tcp
-deviceshare 552/udp
-pirp 553/tcp
-pirp 553/udp
-rtsp 554/tcp #Real Time Stream Control Protocol
-rtsp 554/udp #Real Time Stream Control Protocol
-dsf 555/tcp
-dsf 555/udp
-remotefs 556/tcp rfs rfs_server # Brunhoff remote filesystem
-remotefs 556/udp rfs rfs_server # Brunhoff remote filesystem
-openvms-sysipc 557/tcp
-openvms-sysipc 557/udp
-sdnskmp 558/tcp
-sdnskmp 558/udp
-teedtap 559/tcp
-teedtap 559/udp
-rmonitor 560/tcp rmonitord
-rmonitor 560/udp rmonitord
-monitor 561/tcp
-monitor 561/udp
-chshell 562/tcp chcmd
-chshell 562/udp chcmd
-nntps 563/tcp snntp #nntp protocol over TLS/SSL
-nntps 563/udp snntp #nntp protocol over TLS/SSL
-9pfs 564/tcp #plan 9 file service
-9pfs 564/udp #plan 9 file service
-whoami 565/tcp
-whoami 565/udp
-streettalk 566/tcp
-banyan-rpc 567/tcp
-banyan-rpc 567/udp
-ms-shuttle 568/tcp #Microsoft shuttle
-ms-shuttle 568/udp #Microsoft shuttle
-ms-rome 569/tcp #Microsoft rome
-ms-rome 569/udp #Microsoft rome
-meter 570/tcp #demon
-meter 570/udp #demon
-umeter 571/tcp #udemon
-umeter 571/udp #udemon
-sonar 572/tcp
-sonar 572/udp
-banyan-vip 573/tcp
-banyan-vip 573/udp
-ftp-agent 574/tcp #FTP Software Agent System
-ftp-agent 574/udp #FTP Software Agent System
-vemmi 575/tcp
-vemmi 575/udp
-ipcd 576/tcp
-ipcd 576/udp
-vnas 577/tcp
-vnas 577/udp
-ipdd 578/tcp
-ipdd 578/udp
-decbsrv 579/tcp
-decbsrv 579/udp
-sntp-heartbeat 580/tcp
-sntp-heartbeat 580/udp
-bdp 581/tcp #Bundle Discovery Protocol
-bdp 581/udp #Bundle Discovery Protocol
-scc-security 582/tcp
-scc-security 582/udp
-philips-vc 583/tcp #Philips Video-Conferencing
-philips-vc 583/udp #Philips Video-Conferencing
-keyserver 584/tcp
-keyserver 584/udp
-#imap4-ssl@585 never should have been allocated. See PR 46294.
-#imap4-ssl 585/tcp #IMAP4+SSL (use of 585 is not recommended,
-#imap4-ssl 585/udp # use 993 instead)
-password-chg 586/tcp
-password-chg 586/udp
-submission 587/tcp
-submission 587/udp
-cal 588/tcp
-cal 588/udp
-eyelink 589/tcp
-eyelink 589/udp
-tns-cml 590/tcp
-tns-cml 590/udp
-http-alt 591/tcp #FileMaker, Inc. - HTTP Alternate (see Port 80)
-http-alt 591/udp #FileMaker, Inc. - HTTP Alternate (see Port 80)
-eudora-set 592/tcp
-eudora-set 592/udp
-http-rpc-epmap 593/tcp #HTTP RPC Ep Map
-http-rpc-epmap 593/udp #HTTP RPC Ep Map
-tpip 594/tcp
-tpip 594/udp
-cab-protocol 595/tcp
-cab-protocol 595/udp
-smsd 596/tcp
-smsd 596/udp
-ptcnameservice 597/tcp #PTC Name Service
-ptcnameservice 597/udp #PTC Name Service
-sco-websrvrmg3 598/tcp #SCO Web Server Manager 3
-sco-websrvrmg3 598/udp #SCO Web Server Manager 3
-acp 599/tcp #Aeolon Core Protocol
-acp 599/udp #Aeolon Core Protocol
-ipcserver 600/tcp #Sun IPC server
-ipcserver 600/udp #Sun IPC server
-urm 606/tcp #Cray Unified Resource Manager
-urm 606/udp #Cray Unified Resource Manager
-nqs 607/tcp
-nqs 607/udp
-sift-uft 608/tcp #Sender-Initiated/Unsolicited File Transfer
-sift-uft 608/udp #Sender-Initiated/Unsolicited File Transfer
-npmp-trap 609/tcp
-npmp-trap 609/udp
-npmp-local 610/tcp
-npmp-local 610/udp
-npmp-gui 611/tcp
-npmp-gui 611/udp
-sshell 614/tcp #SSLshell
-sshell 614/udp
-ipp 631/tcp #IPP (Internet Printing Protocol)
-ipp 631/udp #IPP (Internet Printing Protocol)
-ginad 634/tcp
-ginad 634/udp
-ldaps 636/tcp sldap #ldap protocol over TLS/SSL
-ldaps 636/udp sldap
-aodv 654/tcp #Ad-Hoc On-Demand Distance Vector Routing Protocol
-aodv 654/udp #Ad-Hoc On-Demand Distance Vector Routing Protocol
-mdqs 666/tcp
-mdqs 666/udp
-#PROBLEMS!===============================================
-doom 666/tcp #doom Id Software
-doom 666/udp #doom Id Software
-#PROBLEMS!===============================================
-acap 674/tcp #Application Configuration Access Protocol
-acap 674/udp #Application Configuration Access Protocol
-elcsd 704/tcp #errlog copy/server daemon
-elcsd 704/udp #errlog copy/server daemon
-entrustmanager 709/tcp #EntrustManager
-entrustmanager 709/udp #EntrustManager
-netviewdm1 729/tcp #IBM NetView DM/6000 Server/Client
-netviewdm1 729/udp #IBM NetView DM/6000 Server/Client
-netviewdm2 730/tcp #IBM NetView DM/6000 send/tcp
-netviewdm2 730/udp #IBM NetView DM/6000 send/tcp
-netviewdm3 731/tcp #IBM NetView DM/6000 receive/tcp
-netviewdm3 731/udp #IBM NetView DM/6000 receive/tcp
-netgw 741/tcp
-netgw 741/udp
-netrcs 742/tcp #Network based Rev. Cont. Sys.
-netrcs 742/udp #Network based Rev. Cont. Sys.
-flexlm 744/tcp #Flexible License Manager
-flexlm 744/udp #Flexible License Manager
-fujitsu-dev 747/tcp #Fujitsu Device Control
-fujitsu-dev 747/udp #Fujitsu Device Control
-ris-cm 748/tcp #Russell Info Sci Calendar Manager
-ris-cm 748/udp #Russell Info Sci Calendar Manager
-kerberos-adm 749/tcp #Kerberos administration (v5)
-kerberos-adm 749/udp #Kerberos administration (v5)
-kerberos-iv 750/udp kdc # Kerberos (v4)
-kerberos-iv 750/tcp kdc # Kerberos (v4)
-#PROBLEMS!========================================================
-#rfile 750/tcp
-#loadav 750/udp
-#PROBLEMS!========================================================
-kerberos_master 751/tcp # Kerberos `kadmin' (v4)
-kerberos_master 751/udp # Kerberos `kadmin' (v4)
-#PROBLEMS!========================================================
-pump 751/tcp
-pump 751/udp
-#PROBLEMS!========================================================
-qrh 752/tcp
-qrh 752/udp
-rrh 753/tcp
-rrh 753/udp
-krb_prop 754/tcp krb5_prop # kerberos/v5 server propagation
-#PROBLEMS!========================================================
-tell 754/tcp #send
-#PROBLEMS!========================================================
-tell 754/udp #send
-nlogin 758/tcp
-nlogin 758/udp
-con 759/tcp
-con 759/udp
-krbupdate 760/tcp kreg # Kerberos (v4) registration
-#PROBLEMS!========================================================
-ns 760/tcp
-#PROBLEMS!========================================================
-ns 760/udp
-kpasswd 761/tcp kpwd # Kerberos (v4) "passwd"
-#PROBLEMS!========================================================
-rxe 761/tcp
-#PROBLEMS!========================================================
-rxe 761/udp
-quotad 762/tcp
-quotad 762/udp
-cycleserv 763/tcp
-cycleserv 763/udp
-omserv 764/tcp
-omserv 764/udp
-webster 765/tcp
-webster 765/udp
-phonebook 767/tcp #phone
-phonebook 767/udp #phone
-vid 769/tcp
-vid 769/udp
-cadlock 770/tcp
-cadlock 770/udp
-rtip 771/tcp
-rtip 771/udp
-cycleserv2 772/tcp
-cycleserv2 772/udp
-submit 773/tcp
-notify 773/udp
-rpasswd 774/tcp
-acmaint_dbd 774/udp
-entomb 775/tcp
-acmaint_transd 775/udp
-wpages 776/tcp
-wpages 776/udp
-wpgs 780/tcp
-wpgs 780/udp
-concert 786/tcp
-concert 786/udp
-mdbs_daemon 800/tcp
-mdbs_daemon 800/udp
-device 801/tcp
-device 801/udp
-supfilesrv 871/tcp # for SUP
-rsync 873/tcp
-rsync 873/udp
-accessbuilder 888/tcp
-accessbuilder 888/udp
-swat 901/tcp # samba web configuration tool
-rndc 953/tcp # named's rndc control socket
-ftps-data 989/tcp # ftp protocol, data, over TLS/SSL
-ftps-data 989/udp
-ftps 990/tcp # ftp protocol, control, over TLS/SSL
-ftps 990/udp
-telnets 992/tcp # telnet protocol over TLS/SSL
-telnets 992/udp
-imaps 993/tcp # imap4 protocol over TLS/SSL
-imaps 993/udp
-ircs 994/tcp # irc protocol over TLS/SSL
-ircs 994/udp
-pop3s 995/tcp spop3 # pop3 protocol over TLS/SSL
-pop3s 995/udp spop3
-vsinet 996/tcp
-vsinet 996/udp
-maitrd 997/tcp
-maitrd 997/udp
-busboy 998/tcp
-puparp 998/udp
-garcon 999/tcp
-applix 999/udp #Applix ac
-puprouter 999/tcp
-puprouter 999/udp
-cadlock2 1000/tcp
-cadlock2 1000/udp
-#
-# REGISTERED PORT NUMBERS
-#
-blackjack 1025/tcp #network blackjack
-blackjack 1025/udp #network blackjack
-iad1 1030/tcp #BBN IAD
-iad1 1030/udp #BBN IAD
-iad2 1031/tcp #BBN IAD
-iad2 1031/udp #BBN IAD
-iad3 1032/tcp #BBN IAD
-iad3 1032/udp #BBN IAD
-nim 1058/tcp
-nim 1058/udp
-nimreg 1059/tcp
-nimreg 1059/udp
-instl_boots 1067/tcp #Installation Bootstrap Proto. Serv.
-instl_boots 1067/udp #Installation Bootstrap Proto. Serv.
-instl_bootc 1068/tcp #Installation Bootstrap Proto. Cli.
-instl_bootc 1068/udp #Installation Bootstrap Proto. Cli.
-socks 1080/tcp
-socks 1080/udp
-ansoft-lm-1 1083/tcp #Anasoft License Manager
-ansoft-lm-1 1083/udp #Anasoft License Manager
-ansoft-lm-2 1084/tcp #Anasoft License Manager
-ansoft-lm-2 1084/udp #Anasoft License Manager
-webobjects 1085/tcp #Web Objects
-webobjects 1085/udp #Web Objects
-kpop 1109/tcp #Unofficial
-kpop 1109/udp #Unofficial
-nfsd-status 1110/tcp #Cluster status info
-nfsd-keepalive 1110/udp #Client status info
-supfiledbg 1127/tcp # for SUP
-nfa 1155/tcp #Network File Access
-nfa 1155/udp #Network File Access
-phone 1167/udp #conference calling
-skkserv 1178/tcp #SKK (kanji input)
-lupa 1212/tcp
-lupa 1212/udp
-nerv 1222/tcp #SNI R&D network
-nerv 1222/udp #SNI R&D network
-hermes 1248/tcp
-hermes 1248/udp
-healthd 1281/tcp #healthd
-healthd 1281/udp #healthd
-alta-ana-lm 1346/tcp #Alta Analytics License Manager
-alta-ana-lm 1346/udp #Alta Analytics License Manager
-bbn-mmc 1347/tcp #multi media conferencing
-bbn-mmc 1347/udp #multi media conferencing
-bbn-mmx 1348/tcp #multi media conferencing
-bbn-mmx 1348/udp #multi media conferencing
-sbook 1349/tcp #Registration Network Protocol
-sbook 1349/udp #Registration Network Protocol
-editbench 1350/tcp #Registration Network Protocol
-editbench 1350/udp #Registration Network Protocol
-equationbuilder 1351/tcp #Digital Tool Works (MIT)
-equationbuilder 1351/udp #Digital Tool Works (MIT)
-lotusnote 1352/tcp #Lotus Note
-lotusnote 1352/udp #Lotus Note
-relief 1353/tcp #Relief Consulting
-relief 1353/udp #Relief Consulting
-rightbrain 1354/tcp #RightBrain Software
-rightbrain 1354/udp #RightBrain Software
-intuitive-edge 1355/tcp #Intuitive Edge
-intuitive-edge 1355/udp #Intuitive Edge
-cuillamartin 1356/tcp #CuillaMartin Company
-cuillamartin 1356/udp #CuillaMartin Company
-pegboard 1357/tcp #Electronic PegBoard
-pegboard 1357/udp #Electronic PegBoard
-connlcli 1358/tcp
-connlcli 1358/udp
-ftsrv 1359/tcp
-ftsrv 1359/udp
-mimer 1360/tcp
-mimer 1360/udp
-linx 1361/tcp
-linx 1361/udp
-timeflies 1362/tcp
-timeflies 1362/udp
-ndm-requester 1363/tcp #Network DataMover Requester
-ndm-requester 1363/udp #Network DataMover Requester
-ndm-server 1364/tcp #Network DataMover Server
-ndm-server 1364/udp #Network DataMover Server
-adapt-sna 1365/tcp #Network Software Associates
-adapt-sna 1365/udp #Network Software Associates
-netware-csp 1366/tcp #Novell NetWare Comm Service Platform
-netware-csp 1366/udp #Novell NetWare Comm Service Platform
-dcs 1367/tcp
-dcs 1367/udp
-screencast 1368/tcp
-screencast 1368/udp
-gv-us 1369/tcp #GlobalView to Unix Shell
-gv-us 1369/udp #GlobalView to Unix Shell
-us-gv 1370/tcp #Unix Shell to GlobalView
-us-gv 1370/udp #Unix Shell to GlobalView
-fc-cli 1371/tcp #Fujitsu Config Protocol
-fc-cli 1371/udp #Fujitsu Config Protocol
-fc-ser 1372/tcp #Fujitsu Config Protocol
-fc-ser 1372/udp #Fujitsu Config Protocol
-chromagrafx 1373/tcp
-chromagrafx 1373/udp
-molly 1374/tcp #EPI Software Systems
-molly 1374/udp #EPI Software Systems
-bytex 1375/tcp
-bytex 1375/udp
-ibm-pps 1376/tcp #IBM Person to Person Software
-ibm-pps 1376/udp #IBM Person to Person Software
-cichlid 1377/tcp #Cichlid License Manager
-cichlid 1377/udp #Cichlid License Manager
-elan 1378/tcp #Elan License Manager
-elan 1378/udp #Elan License Manager
-dbreporter 1379/tcp #Integrity Solutions
-dbreporter 1379/udp #Integrity Solutions
-telesis-licman 1380/tcp #Telesis Network License Manager
-telesis-licman 1380/udp #Telesis Network License Manager
-apple-licman 1381/tcp #Apple Network License Manager
-apple-licman 1381/udp #Apple Network License Manager
-#udt_os 1382/tcp
-#udt_os 1382/udp
-gwha 1383/tcp #GW Hannaway Network License Manager
-gwha 1383/udp #GW Hannaway Network License Manager
-os-licman 1384/tcp #Objective Solutions License Manager
-os-licman 1384/udp #Objective Solutions License Manager
-atex_elmd 1385/tcp #Atex Publishing License Manager
-atex_elmd 1385/udp #Atex Publishing License Manager
-checksum 1386/tcp #CheckSum License Manager
-checksum 1386/udp #CheckSum License Manager
-cadsi-lm 1387/tcp #Computer Aided Design Software Inc LM
-cadsi-lm 1387/udp #Computer Aided Design Software Inc LM
-objective-dbc 1388/tcp #Objective Solutions DataBase Cache
-objective-dbc 1388/udp #Objective Solutions DataBase Cache
-iclpv-dm 1389/tcp #Document Manager
-iclpv-dm 1389/udp #Document Manager
-iclpv-sc 1390/tcp #Storage Controller
-iclpv-sc 1390/udp #Storage Controller
-iclpv-sas 1391/tcp #Storage Access Server
-iclpv-sas 1391/udp #Storage Access Server
-iclpv-pm 1392/tcp #Print Manager
-iclpv-pm 1392/udp #Print Manager
-iclpv-nls 1393/tcp #Network Log Server
-iclpv-nls 1393/udp #Network Log Server
-iclpv-nlc 1394/tcp #Network Log Client
-iclpv-nlc 1394/udp #Network Log Client
-iclpv-wsm 1395/tcp #PC Workstation Manager software
-iclpv-wsm 1395/udp #PC Workstation Manager software
-dvl-activemail 1396/tcp #DVL Active Mail
-dvl-activemail 1396/udp #DVL Active Mail
-audio-activmail 1397/tcp #Audio Active Mail
-audio-activmail 1397/udp #Audio Active Mail
-video-activmail 1398/tcp #Video Active Mail
-video-activmail 1398/udp #Video Active Mail
-cadkey-licman 1399/tcp #Cadkey License Manager
-cadkey-licman 1399/udp #Cadkey License Manager
-cadkey-tablet 1400/tcp #Cadkey Tablet Daemon
-cadkey-tablet 1400/udp #Cadkey Tablet Daemon
-goldleaf-licman 1401/tcp #Goldleaf License Manager
-goldleaf-licman 1401/udp #Goldleaf License Manager
-prm-sm-np 1402/tcp #Prospero Resource Manager
-prm-sm-np 1402/udp #Prospero Resource Manager
-prm-nm-np 1403/tcp #Prospero Resource Manager
-prm-nm-np 1403/udp #Prospero Resource Manager
-igi-lm 1404/tcp #Infinite Graphics License Manager
-igi-lm 1404/udp #Infinite Graphics License Manager
-ibm-res 1405/tcp #IBM Remote Execution Starter
-ibm-res 1405/udp #IBM Remote Execution Starter
-netlabs-lm 1406/tcp #NetLabs License Manager
-netlabs-lm 1406/udp #NetLabs License Manager
-dbsa-lm 1407/tcp #DBSA License Manager
-dbsa-lm 1407/udp #DBSA License Manager
-sophia-lm 1408/tcp #Sophia License Manager
-sophia-lm 1408/udp #Sophia License Manager
-here-lm 1409/tcp #Here License Manager
-here-lm 1409/udp #Here License Manager
-hiq 1410/tcp #HiQ License Manager
-hiq 1410/udp #HiQ License Manager
-af 1411/tcp #AudioFile
-af 1411/udp #AudioFile
-innosys 1412/tcp
-innosys 1412/udp
-innosys-acl 1413/tcp
-innosys-acl 1413/udp
-ibm-mqseries 1414/tcp #IBM MQSeries
-ibm-mqseries 1414/udp #IBM MQSeries
-dbstar 1415/tcp
-dbstar 1415/udp
-novell-lu6.2 1416/tcp #Novell LU6.2
-novell-lu6.2 1416/udp #Novell LU6.2
-timbuktu-srv1 1417/tcp #Timbuktu Service 1 Port
-timbuktu-srv1 1417/udp #Timbuktu Service 1 Port
-timbuktu-srv2 1418/tcp #Timbuktu Service 2 Port
-timbuktu-srv2 1418/udp #Timbuktu Service 2 Port
-timbuktu-srv3 1419/tcp #Timbuktu Service 3 Port
-timbuktu-srv3 1419/udp #Timbuktu Service 3 Port
-timbuktu-srv4 1420/tcp #Timbuktu Service 4 Port
-timbuktu-srv4 1420/udp #Timbuktu Service 4 Port
-gandalf-lm 1421/tcp #Gandalf License Manager
-gandalf-lm 1421/udp #Gandalf License Manager
-autodesk-lm 1422/tcp #Autodesk License Manager
-autodesk-lm 1422/udp #Autodesk License Manager
-essbase 1423/tcp #Essbase Arbor Software
-essbase 1423/udp #Essbase Arbor Software
-hybrid 1424/tcp #Hybrid Encryption Protocol
-hybrid 1424/udp #Hybrid Encryption Protocol
-zion-lm 1425/tcp #Zion Software License Manager
-zion-lm 1425/udp #Zion Software License Manager
-sas-1 1426/tcp #Satellite-data Acquisition System 1
-sas-1 1426/udp #Satellite-data Acquisition System 1
-mloadd 1427/tcp #mloadd monitoring tool
-mloadd 1427/udp #mloadd monitoring tool
-informatik-lm 1428/tcp #Informatik License Manager
-informatik-lm 1428/udp #Informatik License Manager
-nms 1429/tcp #Hypercom NMS
-nms 1429/udp #Hypercom NMS
-tpdu 1430/tcp #Hypercom TPDU
-tpdu 1430/udp #Hypercom TPDU
-rgtp 1431/tcp #Reverse Gossip Transport
-rgtp 1431/udp #Reverse Gossip Transport
-blueberry-lm 1432/tcp #Blueberry Software License Manager
-blueberry-lm 1432/udp #Blueberry Software License Manager
-ms-sql-s 1433/tcp #Microsoft-SQL-Server
-ms-sql-s 1433/udp #Microsoft-SQL-Server
-ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
-ms-sql-m 1434/udp #Microsoft-SQL-Monitor
-ibm-cics 1435/tcp
-ibm-cics 1435/udp
-sas-2 1436/tcp #Satellite-data Acquisition System 2
-sas-2 1436/udp #Satellite-data Acquisition System 2
-tabula 1437/tcp
-tabula 1437/udp
-eicon-server 1438/tcp #Eicon Security Agent/Server
-eicon-server 1438/udp #Eicon Security Agent/Server
-eicon-x25 1439/tcp #Eicon X25/SNA Gateway
-eicon-x25 1439/udp #Eicon X25/SNA Gateway
-eicon-slp 1440/tcp #Eicon Service Location Protocol
-eicon-slp 1440/udp #Eicon Service Location Protocol
-cadis-1 1441/tcp #Cadis License Management
-cadis-1 1441/udp #Cadis License Management
-cadis-2 1442/tcp #Cadis License Management
-cadis-2 1442/udp #Cadis License Management
-ies-lm 1443/tcp #Integrated Engineering Software
-ies-lm 1443/udp #Integrated Engineering Software
-marcam-lm 1444/tcp #Marcam License Management
-marcam-lm 1444/udp #Marcam License Management
-proxima-lm 1445/tcp #Proxima License Manager
-proxima-lm 1445/udp #Proxima License Manager
-ora-lm 1446/tcp #Optical Research Associates License Manager
-ora-lm 1446/udp #Optical Research Associates License Manager
-apri-lm 1447/tcp #Applied Parallel Research LM
-apri-lm 1447/udp #Applied Parallel Research LM
-oc-lm 1448/tcp #OpenConnect License Manager
-oc-lm 1448/udp #OpenConnect License Manager
-peport 1449/tcp
-peport 1449/udp
-dwf 1450/tcp #Tandem Distributed Workbench Facility
-dwf 1450/udp #Tandem Distributed Workbench Facility
-infoman 1451/tcp #IBM Information Management
-infoman 1451/udp #IBM Information Management
-gtegsc-lm 1452/tcp #GTE Government Systems License Man
-gtegsc-lm 1452/udp #GTE Government Systems License Man
-genie-lm 1453/tcp #Genie License Manager
-genie-lm 1453/udp #Genie License Manager
-interhdl_elmd 1454/tcp #interHDL License Manager
-interhdl_elmd 1454/udp #interHDL License Manager
-esl-lm 1455/tcp #ESL License Manager
-esl-lm 1455/udp #ESL License Manager
-dca 1456/tcp
-dca 1456/udp
-valisys-lm 1457/tcp #Valisys License Manager
-valisys-lm 1457/udp #Valisys License Manager
-nrcabq-lm 1458/tcp #Nichols Research Corp.
-nrcabq-lm 1458/udp #Nichols Research Corp.
-proshare1 1459/tcp #Proshare Notebook Application
-proshare1 1459/udp #Proshare Notebook Application
-proshare2 1460/tcp #Proshare Notebook Application
-proshare2 1460/udp #Proshare Notebook Application
-ibm_wrless_lan 1461/tcp #IBM Wireless LAN
-ibm_wrless_lan 1461/udp #IBM Wireless LAN
-world-lm 1462/tcp #World License Manager
-world-lm 1462/udp #World License Manager
-nucleus 1463/tcp
-nucleus 1463/udp
-msl_lmd 1464/tcp #MSL License Manager
-msl_lmd 1464/udp #MSL License Manager
-pipes 1465/tcp #Pipes Platform
-pipes 1465/udp #Pipes Platform mfarlin@peerlogic.com
-oceansoft-lm 1466/tcp #Ocean Software License Manager
-oceansoft-lm 1466/udp #Ocean Software License Manager
-csdmbase 1467/tcp
-csdmbase 1467/udp
-csdm 1468/tcp
-csdm 1468/udp
-aal-lm 1469/tcp #Active Analysis Limited License Manager
-aal-lm 1469/udp #Active Analysis Limited License Manager
-uaiact 1470/tcp #Universal Analytics
-uaiact 1470/udp #Universal Analytics
-csdmbase 1471/tcp
-csdmbase 1471/udp
-csdm 1472/tcp
-csdm 1472/udp
-openmath 1473/tcp
-openmath 1473/udp
-telefinder 1474/tcp
-telefinder 1474/udp
-taligent-lm 1475/tcp #Taligent License Manager
-taligent-lm 1475/udp #Taligent License Manager
-clvm-cfg 1476/tcp
-clvm-cfg 1476/udp
-ms-sna-server 1477/tcp
-ms-sna-server 1477/udp
-ms-sna-base 1478/tcp
-ms-sna-base 1478/udp
-dberegister 1479/tcp
-dberegister 1479/udp
-pacerforum 1480/tcp
-pacerforum 1480/udp
-airs 1481/tcp
-airs 1481/udp
-miteksys-lm 1482/tcp #Miteksys License Manager
-miteksys-lm 1482/udp #Miteksys License Manager
-afs 1483/tcp #AFS License Manager
-afs 1483/udp #AFS License Manager
-confluent 1484/tcp #Confluent License Manager
-confluent 1484/udp #Confluent License Manager
-lansource 1485/tcp
-lansource 1485/udp
-nms_topo_serv 1486/tcp
-nms_topo_serv 1486/udp
-localinfosrvr 1487/tcp
-localinfosrvr 1487/udp
-docstor 1488/tcp
-docstor 1488/udp
-dmdocbroker 1489/tcp
-dmdocbroker 1489/udp
-insitu-conf 1490/tcp
-insitu-conf 1490/udp
-anynetgateway 1491/tcp
-anynetgateway 1491/udp
-stone-design-1 1492/tcp
-stone-design-1 1492/udp
-netmap_lm 1493/tcp
-netmap_lm 1493/udp
-ica 1494/tcp
-ica 1494/udp
-cvc 1495/tcp
-cvc 1495/udp
-liberty-lm 1496/tcp
-liberty-lm 1496/udp
-rfx-lm 1497/tcp
-rfx-lm 1497/udp
-watcom-sql 1498/tcp
-watcom-sql 1498/udp
-fhc 1499/tcp #Federico Heinz Consultora
-fhc 1499/udp #Federico Heinz Consultora
-vlsi-lm 1500/tcp #VLSI License Manager
-vlsi-lm 1500/udp #VLSI License Manager
-sas-3 1501/tcp #Satellite-data Acquisition System 3
-sas-3 1501/udp #Satellite-data Acquisition System 3
-shivadiscovery 1502/tcp #Shiva
-shivadiscovery 1502/udp #Shiva
-imtc-mcs 1503/tcp #Databeam
-imtc-mcs 1503/udp #Databeam
-evb-elm 1504/tcp #EVB Software Engineering License Manager
-evb-elm 1504/udp #EVB Software Engineering License Manager
-funkproxy 1505/tcp #Funk Software, Inc.
-funkproxy 1505/udp #Funk Software, Inc.
-utcd 1506/tcp #Universal Time daemon (utcd)
-utcd 1506/udp #Universal Time daemon (utcd)
-symplex 1507/tcp
-symplex 1507/udp
-diagmond 1508/tcp
-diagmond 1508/udp
-robcad-lm 1509/tcp #Robcad, Ltd. License Manager
-robcad-lm 1509/udp #Robcad, Ltd. License Manager
-mvx-lm 1510/tcp #Midland Valley Exploration Ltd. Lic. Man.
-mvx-lm 1510/udp #Midland Valley Exploration Ltd. Lic. Man.
-3l-l1 1511/tcp
-3l-l1 1511/udp
-wins 1512/tcp #Microsoft's Windows Internet Name Service
-wins 1512/udp #Microsoft's Windows Internet Name Service
-fujitsu-dtc 1513/tcp #Fujitsu Systems Business of America, Inc
-fujitsu-dtc 1513/udp #Fujitsu Systems Business of America, Inc
-fujitsu-dtcns 1514/tcp #Fujitsu Systems Business of America, Inc
-fujitsu-dtcns 1514/udp #Fujitsu Systems Business of America, Inc
-ifor-protocol 1515/tcp
-ifor-protocol 1515/udp
-vpad 1516/tcp #Virtual Places Audio data
-vpad 1516/udp #Virtual Places Audio data
-vpac 1517/tcp #Virtual Places Audio control
-vpac 1517/udp #Virtual Places Audio control
-vpvd 1518/tcp #Virtual Places Video data
-vpvd 1518/udp #Virtual Places Video data
-vpvc 1519/tcp #Virtual Places Video control
-vpvc 1519/udp #Virtual Places Video control
-atm-zip-office 1520/tcp #atm zip office
-atm-zip-office 1520/udp #atm zip office
-ncube-lm 1521/tcp #nCube License Manager
-ncube-lm 1521/udp #nCube License Manager
-rna-lm 1522/tcp #Ricardo North America License Manager
-rna-lm 1522/udp #Ricardo North America License Manager
-cichild-lm 1523/tcp
-cichild-lm 1523/udp
-ingreslock 1524/tcp #ingres
-ingreslock 1524/udp #ingres
-prospero-np 1525/tcp #Prospero Directory Service non-priv
-prospero-np 1525/udp #Prospero Directory Service non-priv
-#PROBLEMS!========================================================
-orasrv 1525/tcp #oracle
-orasrv 1525/udp #oracle
-#PROBLEMS!========================================================
-pdap-np 1526/tcp #Prospero Data Access Prot non-priv
-pdap-np 1526/udp #Prospero Data Access Prot non-priv
-tlisrv 1527/tcp #oracle
-tlisrv 1527/udp #oracle
-mciautoreg 1528/tcp
-mciautoreg 1528/udp
-support 1529/tcp prmsd gnatsd # cygnus bug tracker
-coauthor 1529/tcp #oracle
-coauthor 1529/udp #oracle
-rap-service 1530/tcp
-rap-service 1530/udp
-rap-listen 1531/tcp
-rap-listen 1531/udp
-miroconnect 1532/tcp
-miroconnect 1532/udp
-virtual-places 1533/tcp #Virtual Places Software
-virtual-places 1533/udp #Virtual Places Software
-micromuse-lm 1534/tcp
-micromuse-lm 1534/udp
-ampr-info 1535/tcp
-ampr-info 1535/udp
-ampr-inter 1536/tcp
-ampr-inter 1536/udp
-sdsc-lm 1537/tcp
-sdsc-lm 1537/udp
-3ds-lm 1538/tcp
-3ds-lm 1538/udp
-intellistor-lm 1539/tcp #Intellistor License Manager
-intellistor-lm 1539/udp #Intellistor License Manager
-rds 1540/tcp
-rds 1540/udp
-rds2 1541/tcp
-rds2 1541/udp
-gridgen-elmd 1542/tcp
-gridgen-elmd 1542/udp
-simba-cs 1543/tcp
-simba-cs 1543/udp
-aspeclmd 1544/tcp
-aspeclmd 1544/udp
-vistium-share 1545/tcp
-vistium-share 1545/udp
-abbaccuray 1546/tcp
-abbaccuray 1546/udp
-laplink 1547/tcp
-laplink 1547/udp
-axon-lm 1548/tcp #Axon License Manager
-axon-lm 1548/udp #Axon License Manager
-shivahose 1549/tcp #Shiva Hose
-shivasound 1549/udp #Shiva Sound
-3m-image-lm 1550/tcp #Image Storage license manager 3M Company
-3m-image-lm 1550/udp #Image Storage license manager 3M Company
-hecmtl-db 1551/tcp
-hecmtl-db 1551/udp
-pciarray 1552/tcp
-pciarray 1552/udp
-issd 1600/tcp
-issd 1600/udp
-# IMPORTANT NOTE: Ports 1645/1646 are the traditional radius ports used by
-# many vendors without obtaining official IANA assignment. The official
-# assignment is now ports 1812/1813 and users are encouraged to migrate
-# when possible to these new ports.
-#radius 1645/udp #RADIUS authentication protocol (old)
-#radacct 1646/udp #RADIUS accounting protocol (old)
-nkd 1650/tcp
-nkd 1650/udp
-shiva_confsrvr 1651/tcp
-shiva_confsrvr 1651/udp
-xnmp 1652/tcp
-xnmp 1652/udp
-netview-aix-1 1661/tcp
-netview-aix-1 1661/udp
-netview-aix-2 1662/tcp
-netview-aix-2 1662/udp
-netview-aix-3 1663/tcp
-netview-aix-3 1663/udp
-netview-aix-4 1664/tcp
-netview-aix-4 1664/udp
-netview-aix-5 1665/tcp
-netview-aix-5 1665/udp
-netview-aix-6 1666/tcp
-netview-aix-6 1666/udp
-netview-aix-7 1667/tcp
-netview-aix-7 1667/udp
-netview-aix-8 1668/tcp
-netview-aix-8 1668/udp
-netview-aix-9 1669/tcp
-netview-aix-9 1669/udp
-netview-aix-10 1670/tcp
-netview-aix-10 1670/udp
-netview-aix-11 1671/tcp
-netview-aix-11 1671/udp
-netview-aix-12 1672/tcp
-netview-aix-12 1672/udp
-l2f 1701/tcp #l2f
-l2f 1701/udp #l2f
-l2tp 1701/tcp #Layer 2 Tunnelling Protocol
-l2tp 1701/udp #Layer 2 Tunnelling Protocol
-pptp 1723/tcp #Point-to-point tunnelling protocol
-# IMPORTANT NOTE: See comments for ports 1645/1646 when using older equipment
-radius 1812/udp #RADIUS authentication protocol (IANA sanctioned)
-radacct 1813/udp #RADIUS accounting protocol (IANA sanctioned)
-licensedaemon 1986/tcp #cisco license management
-licensedaemon 1986/udp #cisco license management
-tr-rsrb-p1 1987/tcp #cisco RSRB Priority 1 port
-tr-rsrb-p1 1987/udp #cisco RSRB Priority 1 port
-tr-rsrb-p2 1988/tcp #cisco RSRB Priority 2 port
-tr-rsrb-p2 1988/udp #cisco RSRB Priority 2 port
-tr-rsrb-p3 1989/tcp #cisco RSRB Priority 3 port
-tr-rsrb-p3 1989/udp #cisco RSRB Priority 3 port
-#PROBLEMS!===================================================
-mshnet 1989/tcp #MHSnet system
-mshnet 1989/udp #MHSnet system
-#PROBLEMS!===================================================
-stun-p1 1990/tcp #cisco STUN Priority 1 port
-stun-p1 1990/udp #cisco STUN Priority 1 port
-stun-p2 1991/tcp #cisco STUN Priority 2 port
-stun-p2 1991/udp #cisco STUN Priority 2 port
-stun-p3 1992/tcp #cisco STUN Priority 3 port
-stun-p3 1992/udp #cisco STUN Priority 3 port
-#PROBLEMS!===================================================
-ipsendmsg 1992/tcp
-ipsendmsg 1992/udp
-#PROBLEMS!===================================================
-snmp-tcp-port 1993/tcp #cisco SNMP TCP port
-snmp-tcp-port 1993/udp #cisco SNMP TCP port
-stun-port 1994/tcp #cisco serial tunnel port
-stun-port 1994/udp #cisco serial tunnel port
-perf-port 1995/tcp #cisco perf port
-perf-port 1995/udp #cisco perf port
-tr-rsrb-port 1996/tcp #cisco Remote SRB port
-tr-rsrb-port 1996/udp #cisco Remote SRB port
-gdp-port 1997/tcp #cisco Gateway Discovery Protocol
-gdp-port 1997/udp #cisco Gateway Discovery Protocol
-x25-svc-port 1998/tcp #cisco X.25 service (XOT)
-x25-svc-port 1998/udp #cisco X.25 service (XOT)
-tcp-id-port 1999/tcp #cisco identification port
-tcp-id-port 1999/udp #cisco identification port
-callbook 2000/tcp
-callbook 2000/udp
-dc 2001/tcp
-wizard 2001/udp #curry
-globe 2002/tcp
-globe 2002/udp
-cfingerd 2003/tcp #GNU finger
-mailbox 2004/tcp
-emce 2004/udp #CCWS mm conf
-berknet 2005/tcp
-oracle 2005/udp
-invokator 2006/tcp
-raid-cc 2006/udp #raid
-dectalk 2007/tcp
-raid-am 2007/udp
-conf 2008/tcp
-terminaldb 2008/udp
-news 2009/tcp
-whosockami 2009/udp
-search 2010/tcp
-pipe_server 2010/udp
-raid-cc 2011/tcp #raid
-servserv 2011/udp
-ttyinfo 2012/tcp
-raid-ac 2012/udp
-raid-am 2013/tcp
-raid-cd 2013/udp
-troff 2014/tcp
-raid-sf 2014/udp
-cypress 2015/tcp
-raid-cs 2015/udp
-bootserver 2016/tcp
-bootserver 2016/udp
-cypress-stat 2017/tcp
-bootclient 2017/udp
-terminaldb 2018/tcp
-rellpack 2018/udp
-whosockami 2019/tcp
-about 2019/udp
-xinupageserver 2020/tcp
-xinupageserver 2020/udp
-servexec 2021/tcp
-xinuexpansion1 2021/udp
-down 2022/tcp
-xinuexpansion2 2022/udp
-xinuexpansion3 2023/tcp
-xinuexpansion3 2023/udp
-xinuexpansion4 2024/tcp
-xinuexpansion4 2024/udp
-ellpack 2025/tcp
-xribs 2025/udp
-scrabble 2026/tcp
-scrabble 2026/udp
-shadowserver 2027/tcp
-shadowserver 2027/udp
-submitserver 2028/tcp
-submitserver 2028/udp
-device2 2030/tcp
-device2 2030/udp
-blackboard 2032/tcp
-blackboard 2032/udp
-glogger 2033/tcp
-glogger 2033/udp
-scoremgr 2034/tcp
-scoremgr 2034/udp
-imsldoc 2035/tcp
-imsldoc 2035/udp
-objectmanager 2038/tcp
-objectmanager 2038/udp
-lam 2040/tcp
-lam 2040/udp
-interbase 2041/tcp
-interbase 2041/udp
-isis 2042/tcp
-isis 2042/udp
-isis-bcast 2043/tcp
-isis-bcast 2043/udp
-rimsl 2044/tcp
-rimsl 2044/udp
-cdfunc 2045/tcp
-cdfunc 2045/udp
-sdfunc 2046/tcp
-sdfunc 2046/udp
-#dls 2047/tcp
-#dls 2047/udp
-dls-monitor 2048/tcp
-dls-monitor 2048/udp
-nfsd 2049/tcp nfs # NFS server daemon
-nfsd 2049/udp nfs # NFS server daemon
-#PROBLEMS!=============================================================
-#shilp 2049/tcp
-#shilp 2049/udp
-#PROBLEMS!=============================================================
-dlsrpn 2065/tcp #Data Link Switch Read Port Number
-dlsrpn 2065/udp #Data Link Switch Read Port Number
-dlswpn 2067/tcp #Data Link Switch Write Port Number
-dlswpn 2067/udp #Data Link Switch Write Port Number
-zephyr-clt 2103/udp #Zephyr serv-hm connection
-zephyr-hm 2104/udp #Zephyr hostmanager
-#PROBLEMS!=============================================================
-#zephyr-hm-srv 2105/udp #Zephyr hm-serv connection
-#PROBLEMS!=============================================================
-eklogin 2105/tcp #Kerberos (v4) encrypted rlogin
-eklogin 2105/udp #Kerberos (v4) encrypted rlogin
-ekshell 2106/tcp #Kerberos (v4) encrypted rshell
-ekshell 2106/udp #Kerberos (v4) encrypted rshell
-rkinit 2108/tcp #Kerberos (v4) remote initialization
-rkinit 2108/udp #Kerberos (v4) remote initialization
-ats 2201/tcp #Advanced Training System Program
-ats 2201/udp #Advanced Training System Program
-ivs-video 2232/tcp #IVS Video default
-ivs-video 2232/udp #IVS Video default
-ivsd 2241/tcp #IVS Daemon
-ivsd 2241/udp #IVS Daemon
-pehelp 2307/tcp
-pehelp 2307/udp
-cvspserver 2401/tcp #CVS network server
-cvspserver 2401/udp #CVS network server
-venus 2430/tcp #venus
-venus 2430/udp #venus
-venus-se 2431/tcp #venus-se
-venus-se 2431/udp #venus-se
-codasrv 2432/tcp #codasrv
-codasrv 2432/udp #codasrv
-codasrv-se 2433/tcp #codasrv-se
-codasrv-se 2433/udp #codasrv-se
-rtsserv 2500/tcp #Resource Tracking system server
-rtsserv 2500/udp #Resource Tracking system server
-rtsclient 2501/tcp #Resource Tracking system client
-rtsclient 2501/udp #Resource Tracking system client
-hp-3000-telnet 2564/tcp #HP 3000 NS/VT block mode telnet
-zebrasrv 2600/tcp #zebra service
-zebra 2601/tcp #zebra vty
-ripd 2602/tcp #RIPd vty
-ripngd 2603/tcp #RIPngd vty
-ospfd 2604/tcp #OSPFd vty
-bgpd 2605/tcp #BGPd vty
-ospf6d 2606/tcp #OSPF6d vty
-dict 2628/tcp #RFC 2229
-dict 2628/udp #RFC 2229
-listen 2766/tcp #System V listener port
-www-dev 2784/tcp #world wide web - development
-www-dev 2784/udp #world wide web - development
-eppc 3031/tcp #Remote AppleEvents/PPC Toolbox
-eppc 3031/udp #Remote AppleEvents/PPC Toolbox
-NSWS 3049/tcp
-NSWS 3049/udp
-gds_db 3050/tcp #InterBase Database Remote Protocol
-gds_db 3050/udp #InterBase Database Remote Protocol
-sj3 3086/tcp #SJ3 (kanji input)
-vmodem 3141/tcp
-vmodem 3141/udp
-ccmail 3264/tcp #cc:mail/lotus
-ccmail 3264/udp #cc:mail/lotus
-dec-notes 3333/tcp #DEC Notes
-dec-notes 3333/udp #DEC Notes
-rdp 3389/tcp #Microsoft Remote Desktop Protocol
-bmap 3421/tcp #Bull Apprise portmapper
-bmap 3421/udp #Bull Apprise portmapper
-prsvp 3455/tcp #RSVP Port
-prsvp 3455/udp rsvp-encap #RSVP Port
-vat 3456/tcp #VAT default data
-vat 3456/udp #VAT default data
-vat-control 3457/tcp #VAT default control
-vat-control 3457/udp #VAT default control
-nut 3493/tcp #Network UPS Tools
-nut 3493/udp #Network UPS Tools
-tsp 3653/tcp #Tunnel Setup Protocol
-tsp 3653/udp #Tunnel Setup Protocol
-svn 3690/tcp #Subversion
-svn 3690/udp #Subversion
-udt_os 3900/tcp #Unidata UDT OS
-udt_os 3900/udp #Unidata UDT OS
-mapper-nodemgr 3984/tcp #MAPPER network node manager
-mapper-nodemgr 3984/udp #MAPPER network node manager
-mapper-mapethd 3985/tcp #MAPPER TCP/IP server
-mapper-mapethd 3985/udp #MAPPER TCP/IP server
-mapper-ws_ethd 3986/tcp #MAPPER workstation server
-mapper-ws_ethd 3986/udp #MAPPER workstation server
-netcheque 4008/tcp #NetCheque accounting
-netcheque 4008/udp #NetCheque accounting
-lockd 4045/udp # NFS lock daemon/manager
-lockd 4045/tcp
-nuts_dem 4132/tcp #NUTS Daemon
-nuts_dem 4132/udp #NUTS Daemon
-nuts_bootp 4133/tcp #NUTS Bootp Server
-nuts_bootp 4133/udp #NUTS Bootp Server
-rwhois 4321/tcp #Remote Who Is
-rwhois 4321/udp #Remote Who Is
-unicall 4343/tcp
-unicall 4343/udp
-krb524 4444/tcp
-krb524 4444/udp
-# PROBLEM krb524 assigned the port,
-# PROBLEM nv used it without an assignment
-nv-video 4444/tcp #NV Video default
-nv-video 4444/udp #NV Video default
-sae-urn 4500/tcp
-sae-urn 4500/udp
-fax 4557/tcp #FAX transmission service
-hylafax 4559/tcp #HylaFAX client-server protocol
-rfa 4672/tcp #remote file access server
-rfa 4672/udp #remote file access server
-commplex-main 5000/tcp
-commplex-main 5000/udp
-commplex-link 5001/tcp
-commplex-link 5001/udp
-rfe 5002/tcp #radio free ethernet
-rfe 5002/udp #radio free ethernet
-telelpathstart 5010/tcp
-telelpathstart 5010/udp
-telelpathattack 5011/tcp
-telelpathattack 5011/udp
-mmcc 5050/tcp #multimedia conference control tool
-mmcc 5050/udp #multimedia conference control tool
-rmonitor_secure 5145/tcp
-rmonitor_secure 5145/udp
-aol 5190/tcp #America-Online
-aol 5190/udp #America-Online
-aol-1 5191/tcp #AmericaOnline1
-aol-1 5191/udp #AmericaOnline1
-aol-2 5192/tcp #AmericaOnline2
-aol-2 5192/udp #AmericaOnline2
-aol-3 5193/tcp #AmericaOnline3
-aol-3 5193/udp #AmericaOnline3
-jabber-client 5222/tcp #Jabber Client Connection
-jabber-client 5222/udp #Jabber Client Connection
-padl2sim 5236/tcp
-padl2sim 5236/udp
-jabber-server 5269/tcp #Jabber Server Connection
-jabber-server 5269/udp #Jabber Server Connection
-hacl-hb 5300/tcp # HA cluster heartbeat
-hacl-hb 5300/udp # HA cluster heartbeat
-hacl-gs 5301/tcp # HA cluster general services
-hacl-gs 5301/udp # HA cluster general services
-hacl-cfg 5302/tcp # HA cluster configuration
-hacl-cfg 5302/udp # HA cluster configuration
-hacl-probe 5303/tcp # HA cluster probing
-hacl-probe 5303/udp # HA cluster probing
-hacl-local 5304/tcp
-hacl-local 5304/udp
-hacl-test 5305/tcp
-hacl-test 5305/udp
-cfengine 5308/tcp
-cfengine 5308/udp
-mdns 5353/tcp #Multicast DNS
-mdns 5353/udp #Multicast DNS
-postgresql 5432/tcp #PostgreSQL Database
-postgresql 5432/udp #PostgreSQL Database
-rplay 5555/udp
-canna 5680/tcp #Canna (Japanese Input)
-proshareaudio 5713/tcp #proshare conf audio
-proshareaudio 5713/udp #proshare conf audio
-prosharevideo 5714/tcp #proshare conf video
-prosharevideo 5714/udp #proshare conf video
-prosharedata 5715/tcp #proshare conf data
-prosharedata 5715/udp #proshare conf data
-prosharerequest 5716/tcp #proshare conf request
-prosharerequest 5716/udp #proshare conf request
-prosharenotify 5717/tcp #proshare conf notify
-prosharenotify 5717/udp #proshare conf notify
-cvsup 5999/tcp #CVSup file transfer/John Polstra/FreeBSD
-x11 6000/tcp #6000-6063 are assigned to X Window System
-x11 6000/udp
-x11-ssh 6010/tcp #Unofficial name, for convenience
-x11-ssh 6010/udp
-softcm 6110/tcp #HP SoftBench CM
-softcm 6110/udp #HP SoftBench CM
-spc 6111/tcp #HP SoftBench Sub-Process Control
-spc 6111/udp #HP SoftBench Sub-Process Control
-meta-corp 6141/tcp #Meta Corporation License Manager
-meta-corp 6141/udp #Meta Corporation License Manager
-aspentec-lm 6142/tcp #Aspen Technology License Manager
-aspentec-lm 6142/udp #Aspen Technology License Manager
-watershed-lm 6143/tcp #Watershed License Manager
-watershed-lm 6143/udp #Watershed License Manager
-statsci1-lm 6144/tcp #StatSci License Manager - 1
-statsci1-lm 6144/udp #StatSci License Manager - 1
-statsci2-lm 6145/tcp #StatSci License Manager - 2
-statsci2-lm 6145/udp #StatSci License Manager - 2
-lonewolf-lm 6146/tcp #Lone Wolf Systems License Manager
-lonewolf-lm 6146/udp #Lone Wolf Systems License Manager
-montage-lm 6147/tcp #Montage License Manager
-montage-lm 6147/udp #Montage License Manager
-ricardo-lm 6148/tcp #Ricardo North America License Manager
-ricardo-lm 6148/udp #Ricardo North America License Manager
-xdsxdm 6558/tcp
-xdsxdm 6558/udp
-ircd 6667/tcp #Internet Relay Chat (unoffical)
-acmsoda 6969/tcp
-acmsoda 6969/udp
-afs3-fileserver 7000/tcp #file server itself
-afs3-fileserver 7000/udp #file server itself
-afs3-callback 7001/tcp #callbacks to cache managers
-afs3-callback 7001/udp #callbacks to cache managers
-afs3-prserver 7002/tcp #users & groups database
-afs3-prserver 7002/udp #users & groups database
-afs3-vlserver 7003/tcp #volume location database
-afs3-vlserver 7003/udp #volume location database
-afs3-kaserver 7004/tcp #AFS/Kerberos authentication service
-afs3-kaserver 7004/udp #AFS/Kerberos authentication service
-afs3-volser 7005/tcp #volume management server
-afs3-volser 7005/udp #volume management server
-afs3-errors 7006/tcp #error interpretation service
-afs3-errors 7006/udp #error interpretation service
-afs3-bos 7007/tcp #basic overseer process
-afs3-bos 7007/udp #basic overseer process
-afs3-update 7008/tcp #server-to-server updater
-afs3-update 7008/udp #server-to-server updater
-afs3-rmtsys 7009/tcp #remote cache manager service
-afs3-rmtsys 7009/udp #remote cache manager service
-afs3-resserver 7010/tcp #MR-AFS residence server
-afs3-resserver 7010/udp #MR-AFS residence server
-ups-onlinet 7010/tcp #onlinet uninterruptable power supplies
-ups-onlinet 7010/udp #onlinet uninterruptable power supplies
-afs3-remio 7011/tcp #MR-AFS remote IO server
-afs3-remio 7011/udp #MR-AFS remote IO server
-font-service 7100/tcp #X Font Service
-font-service 7100/udp #X Font Service
-fodms 7200/tcp #FODMS FLIP
-fodms 7200/udp #FODMS FLIP
-dlip 7201/tcp
-dlip 7201/udp
-ftp-proxy 8021/tcp # FTP proxy
-natd 8668/divert # Network Address Translation
-jetdirect 9100/tcp #HP JetDirect card
-git 9418/tcp # Git Version Control System
-man 9535/tcp
-man 9535/udp
-sd 9876/tcp #Session Director
-sd 9876/udp #Session Director
-amanda 10080/udp #Dump server control
-amandaidx 10082/tcp #Amanda indexing
-amidxtape 10083/tcp #Amanda tape indexing
-isode-dua 17007/tcp
-isode-dua 17007/udp
-biimenu 18000/tcp #Beckman Instruments, Inc.
-biimenu 18000/udp #Beckman Instruments, Inc.
-wnn4 22273/tcp wnn6 #Wnn4 (Japanese input)
-wnn4_Cn 22289/tcp wnn6_Cn #Wnn4 (Chinese input)
-wnn4_Kr 22305/tcp wnn6_Kr #Wnn4 (Korean input)
-wnn4_Tw 22321/tcp wnn6_Tw #Wnn4 (Taiwanse input)
-wnn6_DS 26208/tcp #Wnn6 (Dserver)
-dbbrowse 47557/tcp #Databeam Corporation
-dbbrowse 47557/udp #Databeam Corporation
+++ /dev/null
-root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7:::
-daemon:!:13200:0:99999:7:::
-bin:!:13200:0:99999:7:::
-sys:!:13200:0:99999:7:::
-sync:!:13200:0:99999:7:::
-mail:!:13200:0:99999:7:::
-proxy:!:13200:0:99999:7:::
-www-data:!:13200:0:99999:7:::
-backup:!:13200:0:99999:7:::
-operator:!:13200:0:99999:7:::
-haldaemon:!:13200:0:99999:7:::
-dbus:!:13200:0:99999:7:::
-ftp:!:13200:0:99999:7:::
-dnsmasq:!:13200:0:99999:7:::
-sshd:!:13200:0:99999:7:::
-nobody:!:13200:0:99999:7:::
-avr32:$1$TVWxUVs7$/ze18sFeD6F26w0hgyB6M.:13200:0:99999:7:::
-default:!:13200:0:99999:7:::
+++ /dev/null
-# /etc/shells: valid login shells
-/bin/ash
-/bin/sh
-/bin/zsh
-/bin/bash
-/usr/bin/zsh
-/usr/bin/bash
-/usr/bin/screen
+++ /dev/null
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
- /dev/tty[0-9]*) clear
-esac
+++ /dev/null
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
- source ~/.bashrc
-fi
+++ /dev/null
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias ll='/bin/ls --color=tty -laFh'
- alias ls='/bin/ls --color=tty -F'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
+++ /dev/null
-#!/bin/sh
-
-
-case $1 in
- deconfig)
- ifconfig $interface 0.0.0.0
- ;;
- bound|renew)
- ifconfig $interface $ip netmask $subnet broadcast $broadcast
- route add default gw $router
- echo -n > /etc/resolv.conf
- [ -z "$domain" ] || echo "domain $domain" >> /etc/resolv.conf
- for n in $dns; do echo "nameserver $n" >> /etc/resolv.conf; done
- if [ ! -z "$hostname" ]; then
- echo $hostname > /etc/hostname
- hostname $hostname
- fi
- ;;
-esac
--- /dev/null
+ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
+ATSTK1002_PATH=target/device/Atmel/atstk100x
+
+TARGET_SKELETON=$(ATSTK1002_PATH)/target_skeleton
+TARGET_DEVICE_TABLE=$(ATSTK1002_PATH)/device_table.txt
+BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config
+endif
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22.1
+# Wed Aug 1 14:06:14 2007
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1002=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
+CONFIG_BOARD_ATSTK1002_J2_LED=y
+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
+CONFIG_BOARD_ATSTK1002_J2_RGB=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP7000_32_BIT_SMC is not set
+CONFIG_AP7000_16_BIT_SMC=y
+# CONFIG_AP7000_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power managment options
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_LZMA_INITRD=y
+# CONFIG_LZMA_INITRD_KMALLOC_ONLY is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+CONFIG_ATMEL_SSC=m
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=m
+CONFIG_AT32AP700X_WDT_TIMEOUT=2
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=m
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=m
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_AUFS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_KPROBES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22.5
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1002=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
+CONFIG_BOARD_ATSTK1002_GPIO_MOUSE=y
+CONFIG_BOARD_ATSTK1002_J2_LED=y
+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
+CONFIG_BOARD_ATSTK1002_J2_RGB=y
+# CONFIG_BOARD_ATSTK1002_ENABLE_AC97 is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP7000_32_BIT_SMC is not set
+CONFIG_AP7000_16_BIT_SMC=y
+# CONFIG_AP7000_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power managment options
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+CONFIG_ATMEL_SSC=m
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=m
+CONFIG_AT32AP700X_WDT_TIMEOUT=2
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+# CONFIG_SND_ATMEL_AC97 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=m
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=m
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_KPROBES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_USER_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_CPU_AT32AP7001 is not set
+# CONFIG_CPU_AT32AP7002 is not set
+CONFIG_BOARD_ATSTK1002=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+CONFIG_BOARD_ATSTK1002_GPIO_MOUSE=y
+CONFIG_BOARD_ATSTK1000_J2_LED=y
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+CONFIG_BOARD_ATSTK1000_J2_RGB=y
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power managment options
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=m
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+# CONFIG_SND_ATMEL_AC97 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=m
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=m
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_KPROBES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Sun Feb 17 16:50:44 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7000=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_ATSTK1002=y
+# CONFIG_BOARD_ATSTK1003 is not set
+# CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+# CONFIG_GPIO_DEV is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MACB=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ATMELTWI is not set
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+# CONFIG_SND_ATMEL_AC97 is not set
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Sun Feb 17 13:10:12 2008
+#
+BR2_HAVE_DOT_CONFIG=y
+BR2_VERSION="0.10.0-svn"
+# BR2_alpha is not set
+# BR2_arm is not set
+# BR2_armeb is not set
+BR2_avr32=y
+# BR2_cris is not set
+# BR2_ia64 is not set
+# BR2_i386 is not set
+# BR2_m68k is not set
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_nios2 is not set
+# BR2_powerpc is not set
+# BR2_s390 is not set
+# BR2_sh is not set
+# BR2_sh64 is not set
+# BR2_sparc is not set
+# BR2_sparc64 is not set
+# BR2_x86_64 is not set
+BR2_at32ap7000=y
+# BR2_at32ap7001 is not set
+# BR2_at32ap7002 is not set
+BR2_ARCH="avr32"
+BR2_ENDIAN="BIG"
+
+#
+# Target options
+#
+
+#
+# Project Options
+#
+BR2_PROJECT="atstk1002-no-mplayer"
+BR2_HOSTNAME="stk1000.example.net"
+BR2_BANNER="ATSTK1002 ($(DATE))"
+
+#
+# Preset Devices
+#
+BR2_TARGET_ATMEL=y
+
+#
+# Atmel AVR32 Specific Device Support
+#
+BR2_TARGET_AVR32=y
+BR2_TARGET_AT32AP7000=y
+# BR2_TARGET_AT32AP7001 is not set
+# BR2_TARGET_AT32AP7002 is not set
+
+#
+# Development board support
+#
+BR2_TARGET_AVR32_ATSTK1002=y
+# BR2_TARGET_AVR32_ATNGW100 is not set
+# BR2_TARGET_AVR32_ATNGW100_BASE is not set
+# BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
+BR2_BOARD_NAME="atstk100x"
+
+#
+# Package support
+#
+
+#
+# Secondary locations
+#
+BR2_TARGET_ATMEL_COPYTO=""
+BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
+# BR2_TARGET_VALKA is not set
+
+#
+# Generic System Support
+#
+# BR2_TARGET_GENERIC_ACCESS_POINT is not set
+# BR2_TARGET_GENERIC_FIREWALL is not set
+# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+
+#
+# Build options
+#
+BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
+BR2_SVN_CO="svn co"
+BR2_SVN_UP="svn up"
+BR2_GIT="git clone"
+BR2_ZCAT="zcat"
+BR2_BZCAT="bzcat"
+BR2_TAR_OPTIONS=""
+BR2_DL_DIR="$(BASE_DIR)/dl"
+
+#
+# Mirrors and Download locations
+#
+BR2_SOURCEFORGE_MIRROR="easynews"
+BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
+BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
+BR2_DEBIAN_MIRROR="http://ftp.debian.org"
+
+#
+# Atmel Mirrors
+#
+BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/"
+BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
+# BR2_FPU_SUFFIX is not set
+BR2_TOPDIR_PREFIX=""
+BR2_TOPDIR_SUFFIX=""
+BR2_ROOTFS_PREFIX="rootfs"
+BR2_ROOTFS_SUFFIX="$(DATE)"
+BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
+BR2_GNU_TARGET_SUFFIX="linux-uclibc"
+BR2_JLEVEL=1
+# BR2_PREFER_IMA is not set
+# BR2_DEPRECATED is not set
+BR2_RECENT=y
+BR2_STRIP_strip=y
+# BR2_STRIP_sstrip is not set
+# BR2_STRIP_none is not set
+# BR2_PREFER_STATIC_LIB is not set
+# BR2_HAVE_MANPAGES is not set
+# BR2_HAVE_INFOPAGES is not set
+BR2_UPDATE_CONFIG=y
+
+#
+# Toolchain
+#
+BR2_TOOLCHAIN_BUILDROOT=y
+# BR2_TOOLCHAIN_EXTERNAL is not set
+# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
+BR2_TOOLCHAIN_SOURCE=y
+BR2_EXT_GCC_VERSION_4_1_2=y
+BR2_EXT_GCC_VERSION_4_2_1=y
+BR2_EXT_BINUTILS_VERSION_2_17=y
+BR2_EXT_UCLIBC_VERSION_0_9_29=y
+BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
+
+#
+# Kernel Header Options
+#
+# BR2_KERNEL_HEADERS_2_4_25 is not set
+# BR2_KERNEL_HEADERS_2_4_27 is not set
+# BR2_KERNEL_HEADERS_2_4_29 is not set
+# BR2_KERNEL_HEADERS_2_4_31 is not set
+# BR2_KERNEL_HEADERS_2_6_9 is not set
+# BR2_KERNEL_HEADERS_2_6_11 is not set
+# BR2_KERNEL_HEADERS_2_6_12 is not set
+# BR2_KERNEL_HEADERS_2_6_20_4 is not set
+# BR2_KERNEL_HEADERS_2_6_20 is not set
+# BR2_KERNEL_HEADERS_2_6_21_5 is not set
+# BR2_KERNEL_HEADERS_2_6_21 is not set
+# BR2_KERNEL_HEADERS_2_6_22_1 is not set
+# BR2_KERNEL_HEADERS_2_6_22_10 is not set
+# BR2_KERNEL_HEADERS_2_6_22 is not set
+# BR2_KERNEL_HEADERS_2_6_23 is not set
+BR2_KERNEL_HEADERS_2_6_24=y
+# BR2_KERNEL_HEADERS_SNAP is not set
+BR2_DEFAULT_KERNEL_HEADERS="2.6.24"
+
+#
+# uClibc Options
+#
+# BR2_UCLIBC_VERSION_0_9_28_3 is not set
+BR2_UCLIBC_VERSION_0_9_29=y
+# BR2_UCLIBC_VERSION_SNAPSHOT is not set
+BR2_UCLIBC_CONFIG="target/device/Atmel/uClibc.config.avr32"
+# BR2_ENABLE_LOCALE is not set
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+BR2_PTHREADS_OLD=y
+# BR2_PTHREADS_NATIVE is not set
+# BR2_PTHREAD_DEBUG is not set
+# BR2_UCLIBC_PROGRAM_INVOCATION is not set
+
+#
+# Binutils Options
+#
+BR2_BINUTILS_VERSION_2_17=y
+# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
+# BR2_BINUTILS_VERSION_2_18 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
+BR2_BINUTILS_VERSION="2.17"
+BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
+
+#
+# GCC Options
+#
+# BR2_GCC_VERSION_3_4_6 is not set
+# BR2_GCC_VERSION_4_0_4 is not set
+# BR2_GCC_VERSION_4_1_2 is not set
+# BR2_GCC_VERSION_4_2_0 is not set
+BR2_GCC_VERSION_4_2_1=y
+BR2_GCC_SUPPORTS_SYSROOT=y
+# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
+BR2_GCC_VERSION="4.2.1"
+# BR2_TOOLCHAIN_SYSROOT is not set
+# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+BR2_GCC_CROSS_CXX=y
+BR2_INSTALL_LIBSTDCPP=y
+BR2_GCC_SHARED_LIBGCC=y
+
+#
+# Ccache Options
+#
+# BR2_CCACHE is not set
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+BR2_PACKAGE_GDB_SERVER=y
+BR2_PACKAGE_GDB_HOST=y
+# BR2_GDB_VERSION_6_2_1 is not set
+# BR2_GDB_VERSION_6_3 is not set
+BR2_GDB_VERSION_6_4=y
+# BR2_GDB_VERSION_6_5 is not set
+# BR2_GDB_VERSION_6_6 is not set
+# BR2_GDB_VERSION_SNAPSHOT is not set
+BR2_GDB_VERSION="6.4"
+
+#
+# elf2flt
+#
+# BR2_ELF2FLT is not set
+# BR2_MKLIBS is not set
+
+#
+# Common Toolchain Options
+#
+# BR2_PACKAGE_SSTRIP_TARGET is not set
+# BR2_PACKAGE_SSTRIP_HOST is not set
+# BR2_ENABLE_MULTILIB is not set
+BR2_LARGEFILE=y
+BR2_INET_IPV6=y
+BR2_INET_RPC=y
+BR2_USE_WCHAR=y
+BR2_SOFT_FLOAT=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
+BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
+
+#
+# Package Selection for the target
+#
+BR2_PACKAGE_BUSYBOX=y
+# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
+# BR2_BUSYBOX_VERSION_1_6_1 is not set
+# BR2_BUSYBOX_VERSION_1_7_X is not set
+# BR2_BUSYBOX_VERSION_1_8_X is not set
+BR2_BUSYBOX_VERSION_1_9_X=y
+# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
+BR2_BUSYBOX_VERSION="1.9.0"
+BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config"
+BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
+BR2_PACKAGE_BUSYBOX_SKELETON=y
+
+#
+# The minimum needed to build a uClibc development system
+#
+BR2_PACKAGE_BASH=y
+# B2_PACKAGE_BASH_LINK_SH is not set
+BR2_PACKAGE_BZIP2=y
+# BR2_PACKAGE_DIFFUTILS is not set
+# BR2_PACKAGE_FLEX is not set
+# BR2_PACKAGE_GCC_TARGET is not set
+# BR2_PACKAGE_MAKE is not set
+
+#
+# Other development stuff
+#
+# BR2_PACKAGE_AUTOCONF is not set
+# BR2_PACKAGE_AUTOMAKE is not set
+# BR2_PACKAGE_BISON is not set
+# BR2_PACKAGE_CCACHE_TARGET is not set
+# BR2_PACKAGE_CVS is not set
+# BR2_PACKAGE_DISTCC is not set
+# BR2_PACKAGE_DMALLOC is not set
+# BR2_PACKAGE_EXPAT is not set
+# BR2_PACKAGE_FAKEROOT is not set
+BR2_HOST_FAKEROOT=y
+# BR2_PACKAGE_GETTEXT is not set
+# BR2_PACKAGE_LIBINTL is not set
+# BR2_PACKAGE_LIBGMP is not set
+# BR2_PACKAGE_LIBMPFR is not set
+# BR2_PACKAGE_LIBTOOL is not set
+# BR2_PACKAGE_M4 is not set
+# BR2_PACKAGE_PKGCONFIG is not set
+# BR2_READLINE is not set
+# BR2_PACKAGE_XERCES is not set
+
+#
+# Other stuff
+#
+# BR2_PACKAGE_AT is not set
+# BR2_PACKAGE_BERKELEYDB is not set
+# BR2_PACKAGE_BSDIFF is not set
+# BR2_PACKAGE_CUSTOMIZE is not set
+# BR2_PACKAGE_DASH is not set
+# BR2_PACKAGE_FCONFIG is not set
+BR2_PACKAGE_FILE=y
+# BR2_PACKAGE_FIS is not set
+# BR2_PACKAGE_KEXEC is not set
+# BR2_PACKAGE_ICU is not set
+# BR2_PACKAGE_IPKG is not set
+# BR2_PACKAGE_CUPS is not set
+# BR2_PACKAGE_NG_SPICE_REWORK is not set
+# BR2_PACKAGE_GAMIN is not set
+# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
+# BR2_PACKAGE_CLASSPATH is not set
+BR2_PACKAGE_LIBDAEMON=y
+# BR2_PACKAGE_LIBELF is not set
+# BR2_PACKAGE_LIBEVENT is not set
+# BR2_PACKAGE_LIBFLOAT is not set
+# BR2_PACKAGE_LIBGCRYPT is not set
+# BR2_PACKAGE_LIBGPG_ERROR is not set
+# BR2_PACKAGE_LIBLOCKFILE is not set
+# BR2_PACKAGE_LIBSYSFS is not set
+# BR2_PACKAGE_LIBXML2 is not set
+
+#
+# libxslt - disabled (requires pkgconfig)
+#
+# BR2_PACKAGE_LOCKFILE_PROGS is not set
+# BR2_PACKAGE_LSOF is not set
+# BR2_PACKAGE_LTP-TESTSUITE is not set
+# BR2_PACKAGE_LTRACE is not set
+# BR2_PACKAGE_LTT is not set
+# BR2_PACKAGE_PORTAGE is not set
+# BR2_PACKAGE_SQLITE is not set
+BR2_PACKAGE_STRACE=y
+# BR2_PACKAGE_SUDO is not set
+BR2_NETWORK_SUPPORT=y
+
+#
+# Networking applications
+#
+
+#
+# argus - disabled (requires libpcap)
+#
+BR2_PACKAGE_AVAHI=y
+BR2_PACKAGE_AVAHI_AUTOIPD=y
+
+#
+# mDNS/DNS-SD daemon - disabled (requires expat)
+#
+# BR2_PACKAGE_BOA is not set
+# BR2_PACKAGE_BIND is not set
+# BR2_PACKAGE_BRIDGE is not set
+# BR2_PACKAGE_CURL is not set
+# BR2_PACKAGE_LIBCURL is not set
+# BR2_PACKAGE_DNSMASQ is not set
+BR2_PACKAGE_DROPBEAR=y
+# BR2_PACKAGE_ETHTOOL is not set
+BR2_PACKAGE_HASERL=y
+# BR2_PACKAGE_HASERL_VERSION_0_8_0 is not set
+BR2_PACKAGE_HASERL_VERSION_0_9_21=y
+BR2_PACKAGE_HASERL_VERSION="0.9.21"
+# BR2_PACKAGE_IRDA_UTILS is not set
+# BR2_PACKAGE_IPERF is not set
+# BR2_PACKAGE_IPROUTE2 is not set
+
+#
+# ipsec-tools - disabled (requires openssl, flex and the flex library (libfl.a) )
+#
+# BR2_PACKAGE_IPTABLES is not set
+# BR2_PACKAGE_KISMET is not set
+# BR2_PACKAGE_L2TP is not set
+# BR2_PACKAGE_LIBCGI is not set
+# BR2_PACKAGE_LIBCGICC is not set
+# BR2_PACKAGE_LIBEXOSIP2 is not set
+# BR2_PACKAGE_LIBOSIP2 is not set
+# BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LINKS is not set
+BR2_PACKAGE_LRZSZ=y
+# BR2_PACKAGE_MDNSRESPONDER is not set
+# BR2_PACKAGE_MICROCOM is not set
+# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MUTT is not set
+BR2_PACKAGE_NBD=y
+BR2_PACKAGE_NCFTP=y
+
+#
+# ncFTP tools selection
+#
+# BR2_PACKAGE_NCFTP_GET is not set
+# BR2_PACKAGE_NCFTP_PUT is not set
+# BR2_PACKAGE_NCFTP_LS is not set
+# BR2_PACKAGE_NCFTP_BATCH is not set
+# BR2_PACKAGE_NCFTP_SPOOLER is not set
+# BR2_PACKAGE_NCFTP_BOOKMARKS is not set
+# BR2_PACKAGE_NETKITBASE is not set
+# BR2_PACKAGE_NETKITTELNET is not set
+# BR2_PACKAGE_NETPLUG is not set
+# BR2_PACKAGE_NETSNMP is not set
+# BR2_PACKAGE_NFS_UTILS is not set
+BR2_PACKAGE_NTP=y
+# BR2_PACKAGE_NTP_SNTP is not set
+# BR2_PACKAGE_OLSR is not set
+# BR2_PACKAGE_OPENNTPD is not set
+# BR2_PACKAGE_OPENSSH is not set
+# BR2_PACKAGE_OPENSSL is not set
+# BR2_PACKAGE_OPENVPN is not set
+# BR2_PACKAGE_OPENSWAN is not set
+BR2_PACKAGE_PORTMAP=y
+# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_RP_PPPOE is not set
+# BR2_PACKAGE_PPTP_LINUX is not set
+BR2_PACKAGE_PROFTPD=y
+# BR2_PACKAGE_QUAGGA is not set
+
+#
+# quagga suite
+#
+# BR2_PACKAGE_QUAGGA_ZEBRA is not set
+# BR2_PACKAGE_QUAGGA_BGPD is not set
+# BR2_PACKAGE_QUAGGA_RIPD is not set
+# BR2_PACKAGE_QUAGGA_RIPNGD is not set
+# BR2_PACKAGE_QUAGGA_OSPFD is not set
+# BR2_PACKAGE_QUAGGA_OSPF6D is not set
+# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
+# BR2_PACKAGE_QUAGGA_ISISD is not set
+BR2_PACKAGE_RSYNC=y
+# BR2_PACKAGE_SAMBA is not set
+# BR2_PACKAGE_SOCAT is not set
+# BR2_PACKAGE_STUNNEL is not set
+# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_DHCPDUMP is not set
+# BR2_PACKAGE_TFTPD is not set
+# BR2_PACKAGE_TN5250 is not set
+# BR2_PACKAGE_TTCP is not set
+
+#
+# vpnc - disabled (requires libgcrypt and libgpg_error)
+#
+# BR2_PACKAGE_VTUN is not set
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_BLOCKDEV_SUPPORT=y
+
+#
+# dbus not available (need expat or libxml2)
+#
+# BR2_PACKAGE_DM is not set
+# BR2_PACKAGE_DMRAID is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_LIBFUSE is not set
+# BR2_PACKAGE_GADGETFS_TEST is not set
+# BR2_PACKAGE_HAL is not set
+# BR2_PACKAGE_HWDATA is not set
+# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_LIBAIO is not set
+# BR2_PACKAGE_LIBRAW1394 is not set
+# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LM_SENSORS is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_MDADM is not set
+# BR2_PACKAGE_MEMTESTER is not set
+# BR2_PACKAGE_MKDOSFS is not set
+BR2_PACKAGE_MTD=y
+BR2_PACKAGE_MTD_UTILS=y
+# BR2_PACKAGE_MTD_20061007 is not set
+# BR2_PACKAGE_MTD_20050122 is not set
+# BR2_PACKAGE_MTD_SNAPSHOT is not set
+
+#
+# MTD tools selection
+#
+BR2_PACKAGE_MTD_FLASH_ERASE=y
+BR2_PACKAGE_MTD_FLASH_ERASEALL=y
+BR2_PACKAGE_MTD_FLASH_INFO=y
+# BR2_PACKAGE_MTD_FLASH_LOCK is not set
+# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
+BR2_PACKAGE_MTD_FLASHCP=y
+# BR2_PACKAGE_MTD_ERASE is not set
+# BR2_PACKAGE_MTD_JFFS2DUMP is not set
+# BR2_PACKAGE_MTD_JFFS3DUMP is not set
+# BR2_PACKAGE_MTD_SUMTOOL is not set
+# BR2_PACKAGE_MTD_FTL_CHECK is not set
+# BR2_PACKAGE_MTD_FTL_FORMAT is not set
+# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
+# BR2_PACKAGE_MTD_NFTLDUMP is not set
+# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
+# BR2_PACKAGE_MTD_MKFSJFFS is not set
+# BR2_PACKAGE_MTD_NANDDUMP is not set
+# BR2_PACKAGE_MTD_NANDWRITE is not set
+BR2_PACKAGE_MTD_MTD_DEBUG=y
+# BR2_PACKAGE_MTD_DOCFDISK is not set
+# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
+# BR2_PACKAGE_NTFS-3G is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PCMCIA is not set
+# BR2_PACKAGE_RAIDTOOLS is not set
+# BR2_PACKAGE_SETSERIAL is not set
+# BR2_PACKAGE_SMARTMONTOOLS is not set
+# BR2_PACKAGE_USBMOUNT is not set
+# BR2_PACKAGE_USBUTILS is not set
+# BR2_PACKAGE_WIPE is not set
+# BR2_PACKAGE_XFSPROGS is not set
+BR2_AUDIO_SUPPORT=y
+BR2_PACKAGE_ALSA_LIB=y
+BR2_PACKAGE_ALSA_UTILS=y
+
+#
+# ALSA utils selection
+#
+# BR2_PACKAGE_ALSA_UTILS_ALSACONF is not set
+BR2_PACKAGE_ALSA_UTILS_ALSACTL=y
+BR2_PACKAGE_ALSA_UTILS_ALSAMIXER=y
+# BR2_PACKAGE_ALSA_UTILS_AMIDI is not set
+# BR2_PACKAGE_ALSA_UTILS_AMIXER is not set
+# BR2_PACKAGE_ALSA_UTILS_APLAY is not set
+# BR2_PACKAGE_ALSA_UTILS_ARECORD is not set
+# BR2_PACKAGE_ALSA_UTILS_IECSET is not set
+# BR2_PACKAGE_ALSA_UTILS_ACONNECT is not set
+# BR2_PACKAGE_ALSA_UTILS_APLAYMIDI is not set
+# BR2_PACKAGE_ALSA_UTILS_ARECORDMIDI is not set
+# BR2_PACKAGE_ALSA_UTILS_ASEQDUMP is not set
+# BR2_PACKAGE_ALSA_UTILS_ASEQNET is not set
+# BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST is not set
+
+#
+# asterisk - disabled (required openssl and mpg123)
+#
+# BR2_PACKAGE_AUMIX is not set
+# BR2_PACKAGE_LIBMAD is not set
+# BR2_PACKAGE_LIBOGG is not set
+# BR2_PACKAGE_LIBSNDFILE is not set
+
+#
+# libvorbis requires the package libogg to build
+#
+# BR2_PACKAGE_MADPLAY is not set
+# BR2_PACKAGE_MPG123 is not set
+BR2_PACKAGE_MPG123_ALSA=y
+# BR2_PACKAGE_SPEEX is not set
+BR2_GRAPHIC_SUPPORT=y
+
+#
+# text rendering libraries
+#
+BR2_PACKAGE_NCURSES=y
+# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_SLANG is not set
+
+#
+# text rendering applications
+#
+# BR2_PACKAGE_DIALOG is not set
+
+#
+# graphic libraries
+#
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_IMAGEMAGICK is not set
+BR2_PACKAGE_JPEG=y
+BR2_PACKAGE_LIBPNG=y
+BR2_PACKAGE_LIBUNGIF=y
+# BR2_PACKAGE_SDL is not set
+# BR2_PACKAGE_SDL_TTF is not set
+# BR2_PACKAGE_TIFF is not set
+
+#
+# busybox graphic applications
+#
+
+#
+# --> (May be broken in busybox)
+#
+BR2_PACKAGE_FBV=y
+BR2_PACKAGE_FBSET=y
+
+#
+# other GUIs
+#
+# BR2_PACKAGE_QTE is not set
+BR2_PACKAGE_QTOPIA4=y
+# BR2_PACKAGE_QTOPIA4_DEBUG is not set
+BR2_PACKAGE_QTOPIA4_SHARED=y
+# BR2_PACKAGE_QTOPIA4_STATIC is not set
+BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL=y
+# BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL is not set
+BR2_PACKAGE_QTOPIA4_GPL_LICENSE_APPROVED=y
+# BR2_PACKAGE_QTOPIA4_QT3SUPPORT is not set
+BR2_PACKAGE_QTOPIA4_DEPTHS="-depths 24,16,8"
+BR2_PACKAGE_QTOPIA4_GIF=y
+BR2_PACKAGE_QTOPIA4_LIBMNG=y
+BR2_PACKAGE_QTOPIA4_NOJPEG=y
+# BR2_PACKAGE_QTOPIA4_SYSTEMJPEG is not set
+# BR2_PACKAGE_QTOPIA4_QTJPEG is not set
+# BR2_PACKAGE_QTOPIA4_NOZLIB is not set
+BR2_PACKAGE_QTOPIA4_QTZLIB=y
+# BR2_PACKAGE_QTOPIA4_SYSTEMZLIB is not set
+BR2_PACKAGE_QTOPIA4_EMB_PLATFORM="$(ARCH)"
+BR2_PACKAGE_XSERVER_none=y
+# BR2_PACKAGE_XSERVER_x11r7 is not set
+# BR2_PACKAGE_XSERVER_xorg is not set
+# BR2_PACKAGE_XSERVER_tinyx is not set
+BR2_X11_PREFIX="/usr"
+
+#
+# X libraries and helper libraries
+#
+
+#
+# atk - disabled (requires libglib2)
+#
+# BR2_PACKAGE_PANGO is not set
+# BR2_PACKAGE_LIBDRM is not set
+# BR2_PACKAGE_LIBGLIB12 is not set
+# BR2_PACKAGE_LIBGLIB2 is not set
+# BR2_PACKAGE_LIBSEXY is not set
+
+#
+# fltk - disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_FONTCONFIG is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_TSLIB is not set
+# BR2_PACKAGE_OPENMOTIF is not set
+
+#
+# X Window managers
+#
+# BR2_PACKAGE_MATCHBOX is not set
+
+#
+# blackbox - disabled (requires Xorg(7))
+#
+
+#
+# X applications
+#
+
+#
+# dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
+#
+
+#
+# midori - disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_WEBKIT is not set
+
+#
+# synergy - disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_GQVIEW is not set
+# BR2_PACKAGE_LEAFPAD is not set
+# BR2_PACKAGE_TORSMO is not set
+# BR2_PACKAGE_PCMANFM is not set
+# BR2_PACKAGE_XSTROKE is not set
+# BR2_PACKAGE_SYLPHEED is not set
+
+#
+# Video libraries/codecs and applications
+#
+# BR2_PACKAGE_MPLAYER is not set
+BR2_COMPRESSOR_SUPPORT=y
+BR2_PACKAGE_LZO=y
+# BR2_PACKAGE_LZMA_TARGET is not set
+# BR2_PACKAGE_LZMA_HOST is not set
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
+# BR2_SCRIPTING_SUPPORT is not set
+# BR2_GAMES is not set
+
+#
+# Editors
+#
+# BR2_PACKAGE_VIM is not set
+
+#
+# Target filesystem options
+#
+
+#
+# filesystem for target device
+#
+# BR2_TARGET_ROOTFS_CRAMFS is not set
+# BR2_TARGET_ROOTFS_CLOOP is not set
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
+BR2_TARGET_ROOTFS_EXT2_INODES=0
+BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
+BR2_TARGET_ROOTFS_EXT2_SQUASH=y
+BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+# BR2_TARGET_ROOTFS_EXT2_NONE is not set
+# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
+BR2_TARGET_ROOTFS_EXT2_BZIP2=y
+# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
+BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+# BR2_TARGET_ROOTFS_JFFS2 is not set
+# BR2_TARGET_ROOTFS_SQUASHFS is not set
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_TAR_NONE=y
+# BR2_TARGET_ROOTFS_TAR_GZIP is not set
+# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
+# BR2_TARGET_ROOTFS_TAR_LZMA is not set
+BR2_TARGET_ROOTFS_TAR_OPTIONS=""
+BR2_TARGET_ROOTFS_TAR_COPYTO=""
+# BR2_TARGET_ROOTFS_CPIO is not set
+# BR2_TARGET_ROOTFS_INITRAMFS is not set
+
+#
+# bootloader for target device
+#
+BR2_TARGET_U_BOOT=y
+BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE=""
+BR2_TARGET_U_BOOT_CONFIG_BOARD="$(BR2_BOARD_NAME)_config"
+BR2_TARGET_U_BOOT_SERVERIP=""
+BR2_TARGET_U_BOOT_IPADDR=""
+BR2_TARGET_U_BOOT_ETH0ADDR=""
+BR2_TARGET_U_BOOT_ETH1ADDR=""
+BR2_TARGET_U_BOOT_BOOTARGS="console=ttyS0 root=/dev/mmcblk0p1 rootwait=1 fbmem=600k"
+BR2_TARGET_U_BOOT_BOOTCMD="mmcinit; ext2load mmc 0:1 0x90300000 /boot/uImage; bootm"
+
+#
+# Kernel
+#
+# BR2_KERNEL_none is not set
+BR2_KERNEL_LINUX_ADVANCED=y
+# BR2_KERNEL_LINUX is not set
+# BR2_KERNEL_HURD is not set
+BR2_PACKAGE_LINUX=y
+BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.22.5.config"
+BR2_PACKAGE_LINUX_FORMAT="uImage"
+BR2_KERNEL_CURRENT_VERSION="2.6.24"
+BR2_KERNEL_THIS_VERSION="2.6.24"
+BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
+BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
+BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
+# BR2_LINUX_2_6_STABLE is not set
+BR2_LINUX_2_6_24=y
+# BR2_LINUX_2_6_23 is not set
+# BR2_LINUX_2_6_22_10 is not set
+# BR2_LINUX_2_6_22_1 is not set
+# BR2_LINUX_2_6_22 is not set
+# BR2_LINUX_2_6_21_7 is not set
+# BR2_LINUX_2_6_21_5 is not set
+# BR2_LINUX_2_6_21 is not set
+# BR2_LINUX_2_6_20 is not set
+# BR2_LINUX26_CUSTOM is not set
+
+#
+# Patches
+#
+BR2_KERNEL_ADD_NO_PATCH=y
+# BR2_KERNEL_ADD_LATEST_MINORPATCH is not set
+# BR2_KERNEL_ADD_MINORPATCH is not set
+# BR2_KERNEL_ADD_LATEST_RC_PATCH is not set
+# BR2_KERNEL_ADD_RC_PATCH is not set
+# BR2_KERNEL_ADD_LATEST_SNAPSHOT is not set
+# BR2_KERNEL_ADD_SNAPSHOT is not set
+# BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
+# BR2_KERNEL_ADD_MM_PATCH is not set
+# BR2_KERNEL_ADD_PATCH is not set
+BR2_LINUX_BSP_PATCH=""
+# BR2_KERNEL_PREPATCHED is not set
+BR2_KERNEL_BASE=y
+# BR2_KERNEL_LATEST is not set
+BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
+BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
+
+#
+# Linux Kernel Configuration
+#
+BR2_PACKAGE_LINUX_USE_KCONFIG=y
+# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
+# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
+# BR2_LINUX_BIN_BZIMAGE is not set
+BR2_LINUX_BIN_UIMAGE=y
+# BR2_LINUX_BIN_VMLINUX is not set
+# BR2_LINUX_BIN_ZIMAGE is not set
+# BR2_LINUX_BIN_CUSTOM is not set
+
+#
+# Destinations for linux kernel binaries
+#
+BR2_LINUX_COPYTO_ROOTFS=y
+# BR2_LINUX_COPYTO_TFTPBOOT is not set
+BR2_LINUX_COPYTO=""
+# BR2_LINUX_COPY_CONFIGURATION is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Sat Mar 29 23:26:39 2008
+#
+BR2_HAVE_DOT_CONFIG=y
+BR2_VERSION="0.10.0-svn"
+# BR2_alpha is not set
+# BR2_arm is not set
+# BR2_armeb is not set
+BR2_avr32=y
+# BR2_cris is not set
+# BR2_ia64 is not set
+# BR2_i386 is not set
+# BR2_m68k is not set
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_nios2 is not set
+# BR2_powerpc is not set
+# BR2_s390 is not set
+# BR2_sh is not set
+# BR2_sh64 is not set
+# BR2_sparc is not set
+# BR2_sparc64 is not set
+# BR2_x86_64 is not set
+BR2_at32ap7000=y
+# BR2_at32ap7001 is not set
+# BR2_at32ap7002 is not set
+BR2_ARCH="avr32"
+BR2_ENDIAN="BIG"
+
+#
+# Target options
+#
+
+#
+# Project Options
+#
+BR2_PROJECT="atstk1002"
+BR2_HOSTNAME="stk1000.example.net"
+BR2_BANNER="ATSTK1002 ($(DATE))"
+
+#
+# Preset Devices
+#
+BR2_TARGET_ATMEL=y
+
+#
+# Atmel AVR32 Specific Device Support
+#
+BR2_TARGET_AVR32=y
+BR2_TARGET_AT32AP7000=y
+# BR2_TARGET_AT32AP7001 is not set
+# BR2_TARGET_AT32AP7002 is not set
+
+#
+# Development board support
+#
+BR2_TARGET_AVR32_ATSTK1002=y
+# BR2_TARGET_AVR32_ATNGW100 is not set
+# BR2_TARGET_AVR32_ATNGW100_BASE is not set
+# BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
+BR2_BOARD_NAME="atstk100x"
+
+#
+# Package support
+#
+
+#
+# Secondary locations
+#
+BR2_TARGET_ATMEL_COPYTO="/tftpboot"
+BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
+# BR2_TARGET_VALKA is not set
+
+#
+# Generic Architecture support
+#
+
+#
+# Generic System Support
+#
+# BR2_TARGET_GENERIC_ACCESS_POINT is not set
+# BR2_TARGET_GENERIC_FIREWALL is not set
+# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+
+#
+# Build options
+#
+BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
+BR2_SVN_CO="svn co"
+BR2_SVN_UP="svn up"
+BR2_GIT="git clone"
+BR2_ZCAT="zcat"
+BR2_BZCAT="bzcat"
+BR2_TAR_OPTIONS=""
+BR2_DL_DIR="$(BASE_DIR)/dl"
+
+#
+# Mirrors and Download locations
+#
+BR2_SOURCEFORGE_MIRROR="easynews"
+BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
+BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
+BR2_DEBIAN_MIRROR="http://ftp.debian.org"
+
+#
+# Atmel Mirrors
+#
+BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/"
+BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
+# BR2_FPU_SUFFIX is not set
+BR2_TOPDIR_PREFIX=""
+BR2_TOPDIR_SUFFIX=""
+BR2_ROOTFS_PREFIX="rootfs"
+BR2_ROOTFS_SUFFIX="$(DATE)"
+BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
+BR2_GNU_TARGET_SUFFIX="linux-uclibc"
+BR2_JLEVEL=2
+# BR2_PREFER_IMA is not set
+# BR2_DEPRECATED is not set
+BR2_RECENT=y
+# BR2_ENABLE_DEBUG is not set
+BR2_STRIP_strip=y
+# BR2_STRIP_sstrip is not set
+# BR2_STRIP_none is not set
+# BR2_OPTIMIZE_0 is not set
+# BR2_OPTIMIZE_1 is not set
+BR2_OPTIMIZE_2=y
+# BR2_OPTIMIZE_3 is not set
+# BR2_OPTIMIZE_S is not set
+# BR2_PREFER_STATIC_LIB is not set
+# BR2_HAVE_MANPAGES is not set
+# BR2_HAVE_INFOPAGES is not set
+# BR2_HAVE_DEVFILES is not set
+BR2_UPDATE_CONFIG=y
+
+#
+# Toolchain
+#
+# BR2_TOOLCHAIN_BUILDROOT is not set
+# BR2_TOOLCHAIN_EXTERNAL is not set
+BR2_TOOLCHAIN_EXTERNAL_SOURCE=y
+BR2_TOOLCHAIN_SOURCE=y
+# BR2_TOOLCHAIN_ATMEL_AVR32_4_1_2 is not set
+BR2_TOOLCHAIN_ATMEL_AVR32_4_2_1=y
+# BR2_TOOLCHAIN_UNKNOWNVENDOR is not set
+BR2_TOOLCHAIN_ATMEL_AVR32=y
+BR2_VENDOR_SITE="$(BR2_ATMEL_MIRROR)"
+BR2_VENDOR_SUFFIX="-avr32"
+BR2_VENDOR_BINUTILS_RELEASE="-2.1.3"
+BR2_VENDOR_GCC_RELEASE="-2.1.3"
+BR2_VENDOR_UCLIBC_RELEASE="-2.1.3"
+BR2_VENDOR_GDB_RELEASE="-2.1.3"
+BR2_VENDOR_PATCH_DIR="target/device/Atmel/toolchain/avr32"
+# BR2_EXT_GCC_VERSION_4_1_2 is not set
+BR2_EXT_GCC_VERSION_4_2_1=y
+BR2_EXT_BINUTILS_VERSION_2_17=y
+BR2_EXT_UCLIBC_VERSION_0_9_29=y
+# BR2_EXT_UCLIBC_VERSION_0_9_28_3 is not set
+
+#
+# Kernel Header Options
+#
+# BR2_KERNEL_HEADERS_2_4_25 is not set
+# BR2_KERNEL_HEADERS_2_4_27 is not set
+# BR2_KERNEL_HEADERS_2_4_29 is not set
+# BR2_KERNEL_HEADERS_2_4_31 is not set
+# BR2_KERNEL_HEADERS_2_6_9 is not set
+# BR2_KERNEL_HEADERS_2_6_11 is not set
+# BR2_KERNEL_HEADERS_2_6_12 is not set
+# BR2_KERNEL_HEADERS_2_6_20_4 is not set
+# BR2_KERNEL_HEADERS_2_6_20 is not set
+# BR2_KERNEL_HEADERS_2_6_21_5 is not set
+# BR2_KERNEL_HEADERS_2_6_21 is not set
+# BR2_KERNEL_HEADERS_2_6_22_1 is not set
+# BR2_KERNEL_HEADERS_2_6_22_10 is not set
+# BR2_KERNEL_HEADERS_2_6_22 is not set
+# BR2_KERNEL_HEADERS_2_6_23 is not set
+BR2_KERNEL_HEADERS_2_6_24=y
+# BR2_KERNEL_HEADERS_SNAP is not set
+BR2_DEFAULT_KERNEL_HEADERS="2.6.24"
+
+#
+# uClibc Options
+#
+# BR2_UCLIBC_VERSION_0_9_28_3 is not set
+BR2_UCLIBC_VERSION_0_9_29=y
+# BR2_UCLIBC_VERSION_SNAPSHOT is not set
+BR2_UCLIBC_CONFIG="target/device/Atmel/uClibc.config.avr32"
+BR2_ENABLE_LOCALE=y
+# BR2_PTHREADS_NONE is not set
+# BR2_PTHREADS is not set
+BR2_PTHREADS_OLD=y
+# BR2_PTHREADS_NATIVE is not set
+# BR2_PTHREAD_DEBUG is not set
+BR2_UCLIBC_PROGRAM_INVOCATION=y
+
+#
+# Binutils Options
+#
+BR2_BINUTILS_VERSION_2_17=y
+# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
+# BR2_BINUTILS_VERSION_2_18 is not set
+# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
+BR2_BINUTILS_VERSION="2.17"
+BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
+
+#
+# GCC Options
+#
+# BR2_GCC_VERSION_3_4_6 is not set
+# BR2_GCC_VERSION_4_0_4 is not set
+# BR2_GCC_VERSION_4_1_2 is not set
+# BR2_GCC_VERSION_4_2_0 is not set
+BR2_GCC_VERSION_4_2_1=y
+BR2_GCC_SUPPORTS_SYSROOT=y
+# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
+BR2_GCC_VERSION="4.2.1"
+BR2_TOOLCHAIN_SYSROOT=y
+# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+BR2_GCC_CROSS_CXX=y
+BR2_INSTALL_LIBSTDCPP=y
+BR2_GCC_SHARED_LIBGCC=y
+
+#
+# Ccache Options
+#
+# BR2_CCACHE is not set
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+BR2_PACKAGE_GDB_SERVER=y
+BR2_PACKAGE_GDB_HOST=y
+# BR2_GDB_VERSION_6_2_1 is not set
+# BR2_GDB_VERSION_6_3 is not set
+BR2_GDB_VERSION_6_4=y
+# BR2_GDB_VERSION_6_5 is not set
+# BR2_GDB_VERSION_6_6 is not set
+# BR2_GDB_VERSION_SNAPSHOT is not set
+BR2_GDB_VERSION="6.4"
+
+#
+# elf2flt
+#
+# BR2_ELF2FLT is not set
+# BR2_MKLIBS is not set
+
+#
+# Common Toolchain Options
+#
+# BR2_PACKAGE_SSTRIP_TARGET is not set
+# BR2_PACKAGE_SSTRIP_HOST is not set
+# BR2_ENABLE_MULTILIB is not set
+BR2_LARGEFILE=y
+BR2_INET_IPV6=y
+BR2_INET_RPC=y
+BR2_USE_WCHAR=y
+BR2_SOFT_FLOAT=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
+BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
+
+#
+# Package Selection for the target
+#
+BR2_PACKAGE_BUSYBOX=y
+# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
+# BR2_BUSYBOX_VERSION_1_6_1 is not set
+# BR2_BUSYBOX_VERSION_1_7_X is not set
+# BR2_BUSYBOX_VERSION_1_8_X is not set
+# BR2_BUSYBOX_VERSION_1_9_X is not set
+BR2_BUSYBOX_VERSION_1_10_X=y
+# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
+BR2_BUSYBOX_VERSION="1.10.0"
+BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox-1.6.0.config"
+BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
+BR2_PACKAGE_BUSYBOX_SKELETON=y
+
+#
+# The minimum needed to build a uClibc development system
+#
+BR2_PACKAGE_BASH=y
+BR2_PACKAGE_BZIP2=y
+# BR2_PACKAGE_DIFFUTILS is not set
+# BR2_PACKAGE_FLEX is not set
+# BR2_PACKAGE_GCC_TARGET is not set
+# BR2_PACKAGE_MAKE is not set
+
+#
+# Other development stuff
+#
+# BR2_PACKAGE_AUTOCONF is not set
+# BR2_PACKAGE_AUTOMAKE is not set
+# BR2_PACKAGE_BISON is not set
+# BR2_PACKAGE_CCACHE_TARGET is not set
+# BR2_PACKAGE_CVS is not set
+# BR2_PACKAGE_DISTCC is not set
+# BR2_PACKAGE_DMALLOC is not set
+# BR2_PACKAGE_FAKEROOT is not set
+BR2_HOST_FAKEROOT=y
+# BR2_PACKAGE_GETTEXT is not set
+# BR2_PACKAGE_LIBINTL is not set
+# BR2_PACKAGE_LIBGMP is not set
+# BR2_PACKAGE_LIBMPFR is not set
+# BR2_PACKAGE_LIBTOOL is not set
+# BR2_PACKAGE_M4 is not set
+# BR2_PACKAGE_PKGCONFIG is not set
+# BR2_READLINE is not set
+
+#
+# Other stuff
+#
+# BR2_PACKAGE_AT is not set
+# BR2_PACKAGE_BERKELEYDB is not set
+# BR2_PACKAGE_BSDIFF is not set
+# BR2_PACKAGE_CUPS is not set
+# BR2_PACKAGE_CUSTOMIZE is not set
+# BR2_PACKAGE_DASH is not set
+BR2_PACKAGE_FILE=y
+# BR2_PACKAGE_GAMIN is not set
+# BR2_PACKAGE_ICU is not set
+# BR2_PACKAGE_IPKG is not set
+# BR2_PACKAGE_KEXEC is not set
+BR2_PACKAGE_LIBDAEMON=y
+# BR2_PACKAGE_LIBELF is not set
+# BR2_PACKAGE_LIBEVENT is not set
+# BR2_PACKAGE_LIBFLOAT is not set
+# BR2_PACKAGE_LIBGCRYPT is not set
+# BR2_PACKAGE_LIBGPG_ERROR is not set
+# BR2_PACKAGE_LIBLOCKFILE is not set
+# BR2_PACKAGE_LIBSYSFS is not set
+# BR2_PACKAGE_LOCKFILE_PROGS is not set
+# BR2_PACKAGE_LSOF is not set
+# BR2_PACKAGE_LTP-TESTSUITE is not set
+# BR2_PACKAGE_LTRACE is not set
+# BR2_PACKAGE_LTT is not set
+# BR2_PACKAGE_NG_SPICE_REWORK is not set
+# BR2_PACKAGE_PORTAGE is not set
+# BR2_PACKAGE_SQLITE is not set
+# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
+BR2_PACKAGE_STRACE=y
+# BR2_PACKAGE_SUDO is not set
+BR2_NETWORK_SUPPORT=y
+
+#
+# Networking applications
+#
+
+#
+# argus - disabled (requires libpcap)
+#
+BR2_PACKAGE_AVAHI=y
+BR2_PACKAGE_AVAHI_AUTOIPD=y
+
+#
+# mDNS/DNS-SD daemon - disabled (requires expat)
+#
+# BR2_PACKAGE_BOA is not set
+# BR2_PACKAGE_BIND is not set
+# BR2_PACKAGE_BRIDGE is not set
+# BR2_PACKAGE_CURL is not set
+# BR2_PACKAGE_LIBCURL is not set
+# BR2_PACKAGE_DNSMASQ is not set
+BR2_PACKAGE_DROPBEAR=y
+# BR2_PACKAGE_ETHTOOL is not set
+BR2_PACKAGE_HASERL=y
+# BR2_PACKAGE_HASERL_VERSION_0_8_0 is not set
+BR2_PACKAGE_HASERL_VERSION_0_9_22=y
+BR2_PACKAGE_HASERL_VERSION="0.9.22"
+# BR2_PACKAGE_IRDA_UTILS is not set
+# BR2_PACKAGE_IPERF is not set
+# BR2_PACKAGE_IPROUTE2 is not set
+
+#
+# ipsec-tools - disabled (requires openssl, flex and the flex library (libfl.a) )
+#
+# BR2_PACKAGE_IPTABLES is not set
+# BR2_PACKAGE_KISMET is not set
+# BR2_PACKAGE_L2TP is not set
+# BR2_PACKAGE_LIBCGI is not set
+# BR2_PACKAGE_LIBCGICC is not set
+# BR2_PACKAGE_LIBEXOSIP2 is not set
+# BR2_PACKAGE_LIBOSIP2 is not set
+# BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LINKS is not set
+BR2_PACKAGE_LRZSZ=y
+# BR2_PACKAGE_MDNSRESPONDER is not set
+BR2_PACKAGE_MICROCOM=y
+# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MUTT is not set
+BR2_PACKAGE_NBD=y
+BR2_PACKAGE_NCFTP=y
+
+#
+# ncFTP tools selection
+#
+# BR2_PACKAGE_NCFTP_GET is not set
+# BR2_PACKAGE_NCFTP_PUT is not set
+# BR2_PACKAGE_NCFTP_LS is not set
+# BR2_PACKAGE_NCFTP_BATCH is not set
+# BR2_PACKAGE_NCFTP_SPOOLER is not set
+# BR2_PACKAGE_NCFTP_BOOKMARKS is not set
+# BR2_PACKAGE_NETKITBASE is not set
+# BR2_PACKAGE_NETKITTELNET is not set
+# BR2_PACKAGE_NETPLUG is not set
+# BR2_PACKAGE_NETSNMP is not set
+# BR2_PACKAGE_NFS_UTILS is not set
+BR2_PACKAGE_NTP=y
+# BR2_PACKAGE_NTP_SNTP is not set
+# BR2_PACKAGE_OLSR is not set
+# BR2_PACKAGE_OPENNTPD is not set
+# BR2_PACKAGE_OPENSSH is not set
+# BR2_PACKAGE_OPENSSL is not set
+# BR2_PACKAGE_OPENVPN is not set
+# BR2_PACKAGE_OPENSWAN is not set
+BR2_PACKAGE_PORTMAP=y
+# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_RP_PPPOE is not set
+# BR2_PACKAGE_PPTP_LINUX is not set
+BR2_PACKAGE_PROFTPD=y
+# BR2_PACKAGE_QUAGGA is not set
+
+#
+# quagga suite
+#
+# BR2_PACKAGE_QUAGGA_ZEBRA is not set
+# BR2_PACKAGE_QUAGGA_BGPD is not set
+# BR2_PACKAGE_QUAGGA_RIPD is not set
+# BR2_PACKAGE_QUAGGA_RIPNGD is not set
+# BR2_PACKAGE_QUAGGA_OSPFD is not set
+# BR2_PACKAGE_QUAGGA_OSPF6D is not set
+# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
+# BR2_PACKAGE_QUAGGA_ISISD is not set
+BR2_PACKAGE_RSYNC=y
+# BR2_PACKAGE_SAMBA is not set
+# BR2_PACKAGE_SOCAT is not set
+# BR2_PACKAGE_STUNNEL is not set
+# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_DHCPDUMP is not set
+# BR2_PACKAGE_TFTPD is not set
+# BR2_PACKAGE_TN5250 is not set
+# BR2_PACKAGE_TTCP is not set
+# BR2_PACKAGE_UDPCAST is not set
+
+#
+# vpnc - disabled (requires libgcrypt and libgpg_error)
+#
+# BR2_PACKAGE_VTUN is not set
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_BLOCKDEV_SUPPORT=y
+
+#
+# dbus not available (need expat or libxml2)
+#
+# BR2_PACKAGE_DM is not set
+# BR2_PACKAGE_DMRAID is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_FCONFIG is not set
+# BR2_PACKAGE_FIS is not set
+# BR2_PACKAGE_LIBFUSE is not set
+# BR2_PACKAGE_GADGETFS_TEST is not set
+# BR2_PACKAGE_HAL is not set
+# BR2_PACKAGE_HWDATA is not set
+# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_LIBAIO is not set
+# BR2_PACKAGE_LIBRAW1394 is not set
+# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LM_SENSORS is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_MDADM is not set
+# BR2_PACKAGE_MEMTESTER is not set
+# BR2_PACKAGE_MKDOSFS is not set
+BR2_PACKAGE_MTD=y
+BR2_PACKAGE_MTD_UTILS=y
+# BR2_PACKAGE_MTD_20061007 is not set
+# BR2_PACKAGE_MTD_20050122 is not set
+# BR2_PACKAGE_MTD_UTILS_GIT is not set
+
+#
+# MTD tools selection
+#
+# BR2_PACKAGE_MTD_DOCFDISK is not set
+# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
+BR2_PACKAGE_MTD_FLASHCP=y
+BR2_PACKAGE_MTD_FLASH_ERASE=y
+BR2_PACKAGE_MTD_FLASH_ERASEALL=y
+BR2_PACKAGE_MTD_FLASH_INFO=y
+# BR2_PACKAGE_MTD_FLASH_LOCK is not set
+# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
+# BR2_PACKAGE_MTD_FTL_CHECK is not set
+# BR2_PACKAGE_MTD_FTL_FORMAT is not set
+# BR2_PACKAGE_MTD_JFFS2DUMP is not set
+# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
+# BR2_PACKAGE_MTD_MKFSJFFS is not set
+BR2_PACKAGE_MTD_MTD_DEBUG=y
+# BR2_PACKAGE_MTD_NANDDUMP is not set
+# BR2_PACKAGE_MTD_NANDWRITE is not set
+# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
+# BR2_PACKAGE_MTD_NFTLDUMP is not set
+# BR2_PACKAGE_MTD_SUMTOOL is not set
+# BR2_PACKAGE_NTFS-3G is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PCMCIA is not set
+# BR2_PACKAGE_RAIDTOOLS is not set
+# BR2_PACKAGE_SETSERIAL is not set
+# BR2_PACKAGE_SMARTMONTOOLS is not set
+# BR2_PACKAGE_USBMOUNT is not set
+# BR2_PACKAGE_USBUTILS is not set
+# BR2_PACKAGE_WIPE is not set
+# BR2_PACKAGE_XFSPROGS is not set
+BR2_AUDIO_SUPPORT=y
+BR2_PACKAGE_ALSA_LIB=y
+BR2_PACKAGE_ALSA_UTILS=y
+
+#
+# ALSA utils selection
+#
+# BR2_PACKAGE_ALSA_UTILS_ALSACONF is not set
+BR2_PACKAGE_ALSA_UTILS_ALSACTL=y
+BR2_PACKAGE_ALSA_UTILS_ALSAMIXER=y
+# BR2_PACKAGE_ALSA_UTILS_AMIDI is not set
+# BR2_PACKAGE_ALSA_UTILS_AMIXER is not set
+# BR2_PACKAGE_ALSA_UTILS_APLAY is not set
+# BR2_PACKAGE_ALSA_UTILS_ARECORD is not set
+# BR2_PACKAGE_ALSA_UTILS_IECSET is not set
+# BR2_PACKAGE_ALSA_UTILS_ACONNECT is not set
+# BR2_PACKAGE_ALSA_UTILS_APLAYMIDI is not set
+# BR2_PACKAGE_ALSA_UTILS_ARECORDMIDI is not set
+# BR2_PACKAGE_ALSA_UTILS_ASEQDUMP is not set
+# BR2_PACKAGE_ALSA_UTILS_ASEQNET is not set
+# BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST is not set
+
+#
+# asterisk - disabled (required openssl and mpg123)
+#
+# BR2_PACKAGE_AUMIX is not set
+# BR2_PACKAGE_LIBID3TAG is not set
+BR2_PACKAGE_LIBMAD=y
+# BR2_PACKAGE_LIBMAD_TARGET_HEADERS is not set
+# BR2_PACKAGE_LIBOGG is not set
+# BR2_PACKAGE_LIBSNDFILE is not set
+
+#
+# libvorbis requires the package libogg to build
+#
+# BR2_PACKAGE_MADPLAY is not set
+# BR2_PACKAGE_MPG123 is not set
+BR2_PACKAGE_MPG123_ALSA=y
+# BR2_PACKAGE_SPEEX is not set
+BR2_GRAPHIC_SUPPORT=y
+
+#
+# text rendering libraries
+#
+BR2_PACKAGE_NCURSES=y
+# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_SLANG is not set
+
+#
+# text rendering applications
+#
+# BR2_PACKAGE_DIALOG is not set
+
+#
+# graphic libraries
+#
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_IMAGEMAGICK is not set
+BR2_PACKAGE_JPEG=y
+BR2_PACKAGE_LIBPNG=y
+BR2_PACKAGE_LIBUNGIF=y
+# BR2_PACKAGE_SDL is not set
+# BR2_PACKAGE_SDL_MIXER is not set
+# BR2_PACKAGE_SDL_TTF is not set
+# BR2_PACKAGE_TIFF is not set
+
+#
+# busybox graphic applications
+#
+
+#
+# --> (May be broken in busybox)
+#
+BR2_PACKAGE_FBV=y
+BR2_PACKAGE_FBSET=y
+
+#
+# other GUIs
+#
+# BR2_PACKAGE_QTE is not set
+BR2_PACKAGE_QTOPIA4=y
+# BR2_PACKAGE_QTOPIA4_DEBUG is not set
+BR2_PACKAGE_QTOPIA4_SHARED=y
+# BR2_PACKAGE_QTOPIA4_STATIC is not set
+BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL=y
+# BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL is not set
+BR2_PACKAGE_QTOPIA4_GPL_LICENSE_APPROVED=y
+# BR2_PACKAGE_QTOPIA4_QT3SUPPORT is not set
+BR2_PACKAGE_QTOPIA4_GIF=y
+BR2_PACKAGE_QTOPIA4_LIBMNG=y
+BR2_PACKAGE_QTOPIA4_NOJPEG=y
+# BR2_PACKAGE_QTOPIA4_SYSTEMJPEG is not set
+# BR2_PACKAGE_QTOPIA4_QTJPEG is not set
+BR2_PACKAGE_QTOPIA4_NOPNG=y
+# BR2_PACKAGE_QTOPIA4_SYSTEMPNG is not set
+# BR2_PACKAGE_QTOPIA4_QTPNG is not set
+BR2_PACKAGE_QTOPIA4_NOTIFF=y
+# BR2_PACKAGE_QTOPIA4_SYSTEMTIFF is not set
+# BR2_PACKAGE_QTOPIA4_QTTIFF is not set
+# BR2_PACKAGE_QTOPIA4_SQL is not set
+# BR2_PACKAGE_QTOPIA4_OPENSSL is not set
+# BR2_PACKAGE_QTOPIA4_NOZLIB is not set
+BR2_PACKAGE_QTOPIA4_QTZLIB=y
+# BR2_PACKAGE_QTOPIA4_SYSTEMZLIB is not set
+BR2_PACKAGE_QTOPIA4_EMB_PLATFORM="$(ARCH)"
+BR2_PACKAGE_XSERVER_none=y
+# BR2_PACKAGE_XSERVER_x11r7 is not set
+# BR2_PACKAGE_XSERVER_xorg is not set
+# BR2_PACKAGE_XSERVER_tinyx is not set
+BR2_X11_PREFIX="/usr"
+
+#
+# X libraries and helper libraries
+#
+
+#
+# atk - disabled (requires libglib2)
+#
+# BR2_PACKAGE_PANGO is not set
+# BR2_PACKAGE_LIBDRM is not set
+# BR2_PACKAGE_LIBGLIB12 is not set
+# BR2_PACKAGE_LIBGLIB2 is not set
+# BR2_PACKAGE_LIBSEXY is not set
+
+#
+# fltk - disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_OPENMOTIF is not set
+# BR2_PACKAGE_FONTCONFIG is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_TSLIB is not set
+# BR2_PACKAGE_WEBKIT is not set
+
+#
+# X Window managers
+#
+# BR2_PACKAGE_MATCHBOX is not set
+
+#
+# blackbox - disabled (requires Xorg(7))
+#
+
+#
+# X applications
+#
+# BR2_PACKAGE_ALSAMIXERGUI is not set
+
+#
+# dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
+#
+# BR2_PACKAGE_DOCKER is not set
+# BR2_PACKAGE_GQVIEW is not set
+# BR2_PACKAGE_LEAFPAD is not set
+
+#
+# midori - disabled (requires Xorg(7))
+#
+# BR2_PACKAGE_PCMANFM is not set
+# BR2_PACKAGE_SYLPHEED is not set
+# BR2_PACKAGE_TORSMO is not set
+# BR2_PACKAGE_X11VNC is not set
+# BR2_PACKAGE_XPDF is not set
+# BR2_PACKAGE_XSTROKE is not set
+# BR2_PACKAGE_XVKBD is not set
+
+#
+# Video libraries/codecs and applications
+#
+BR2_PACKAGE_MPLAYER=y
+BR2_COMPRESSOR_SUPPORT=y
+BR2_PACKAGE_LZO=y
+# BR2_PACKAGE_LZMA_TARGET is not set
+# BR2_PACKAGE_LZMA_HOST is not set
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
+# BR2_SCRIPTING_SUPPORT is not set
+BR2_XML_SUPPORT=y
+# BR2_PACKAGE_EXPAT is not set
+# BR2_PACKAGE_EZXML is not set
+# BR2_PACKAGE_LIBXML2 is not set
+
+#
+# libxslt - disabled (requires pkgconfig)
+#
+# BR2_PACKAGE_XERCES is not set
+BR2_JAVA_SUPPORT=y
+# BR2_PACKAGE_CLASSPATH is not set
+# BR2_GAMES is not set
+
+#
+# Target filesystem options
+#
+
+#
+# filesystem for target device
+#
+# BR2_TARGET_ROOTFS_CRAMFS is not set
+# BR2_TARGET_ROOTFS_CLOOP is not set
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
+BR2_TARGET_ROOTFS_EXT2_INODES=0
+BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
+BR2_TARGET_ROOTFS_EXT2_SQUASH=y
+BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+# BR2_TARGET_ROOTFS_EXT2_NONE is not set
+# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
+BR2_TARGET_ROOTFS_EXT2_BZIP2=y
+# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
+BR2_TARGET_ROOTFS_EXT2_COPYTO="/tftpboot"
+# BR2_TARGET_ROOTFS_JFFS2 is not set
+# BR2_TARGET_ROOTFS_SQUASHFS is not set
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_TAR_NONE=y
+# BR2_TARGET_ROOTFS_TAR_GZIP is not set
+# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
+# BR2_TARGET_ROOTFS_TAR_LZMA is not set
+BR2_TARGET_ROOTFS_TAR_OPTIONS=""
+BR2_TARGET_ROOTFS_TAR_COPYTO=""
+# BR2_TARGET_ROOTFS_CPIO is not set
+# BR2_TARGET_ROOTFS_INITRAMFS is not set
+
+#
+# bootloader for target device
+#
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="$(BOARD_NAME)"
+BR2_TARGET_UBOOT_CUSTOM_PATCH=""
+BR2_TARGET_UBOOT_SERVERIP="10.175.196.221"
+BR2_TARGET_UBOOT_IPADDR="10.175.196.18"
+BR2_TARGET_UBOOT_GATEWAY="10.175.196.1"
+BR2_TARGET_UBOOT_NETMASK="255.255.255.0"
+BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18"
+BR2_TARGET_UBOOT_ETH1ADDR=""
+# BR2_TARGET_UBOOT_SILENT is not set
+
+#
+# Kernel
+#
+# BR2_KERNEL_none is not set
+BR2_KERNEL_LINUX_ADVANCED=y
+# BR2_KERNEL_LINUX is not set
+# BR2_KERNEL_HURD is not set
+BR2_PACKAGE_LINUX=y
+BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-2.6.24.config"
+BR2_PACKAGE_LINUX_FORMAT="uImage"
+BR2_KERNEL_PATCH_LEVEL="$(BR2_KERNEL_MINORLEVEL)"
+BR2_KERNEL_CURRENT_VERSION="2.6.24.4"
+BR2_KERNEL_NEXT_VERSION="2.6.25"
+BR2_KERNEL_THIS_VERSION="2.6.24"
+BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
+BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
+BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
+BR2_KERNEL_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
+# BR2_LINUX_2_6_STABLE is not set
+BR2_LINUX_2_6_24=y
+# BR2_LINUX_2_6_23 is not set
+# BR2_LINUX_2_6_22_10 is not set
+# BR2_LINUX_2_6_22_1 is not set
+# BR2_LINUX_2_6_22 is not set
+# BR2_LINUX_2_6_21_7 is not set
+# BR2_LINUX_2_6_21_5 is not set
+# BR2_LINUX_2_6_21 is not set
+# BR2_LINUX_2_6_20 is not set
+# BR2_LINUX_2_6_25 is not set
+# BR2_LINUX26_CUSTOM is not set
+
+#
+# Patches
+#
+BR2_KERNEL_ADD_KERNEL_ORG_PATCH=y
+# BR2_KERNEL_ADD_LATEST is not set
+# BR2_KERNEL_ADD_LATEST_MINORPATCH is not set
+BR2_KERNEL_ADD_MINORPATCH=y
+# BR2_KERNEL_ADD_LATEST_RC_PATCH is not set
+# BR2_KERNEL_ADD_RC_PATCH is not set
+# BR2_KERNEL_ADD_LATEST_SNAPSHOT is not set
+# BR2_KERNEL_ADD_SNAPSHOT is not set
+# BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
+# BR2_KERNEL_ADD_MM_PATCH is not set
+BR2_KERNEL_ADD_PATCH=y
+BR2_KERNEL_MINORLEVEL="3"
+BR2_KERNEL_ARCH_PATCH_ENABLED=y
+BR2_KERNEL_ARCH_PATCH_VERSION="2.6.24"
+BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
+BR2_ARCH_AVR32_2_6_24=y
+# BR2_ARCH_AVR32_2_6_23 is not set
+# BR2_ARCH_AVR32_2_6_22_10 is not set
+# BR2_ARCH_AVR32_2_6_22_1 is not set
+# BR2_ARCH_AVR32_2_6_21_5 is not set
+# BR2_ARCH_AVR32_2_6_20_4 is not set
+# BR2_LINUX_AVR32_ISI_PATCH is not set
+# BR2_LINUX_AVR32_AC97_PATCH is not set
+# BR2_LINUX_AVR32_PSIF_PATCH is not set
+BR2_LINUX_BOARD_PATCH=y
+BR2_LINUX_BSP_PATCH=""
+BR2_KERNEL_PATCH="patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2"
+# BR2_KERNEL_PREPATCHED is not set
+BR2_KERNEL_BASE=y
+# BR2_KERNEL_LATEST is not set
+BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
+BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)"
+
+#
+# Linux Kernel Configuration
+#
+BR2_PACKAGE_LINUX_USE_KCONFIG=y
+# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
+# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
+# BR2_LINUX_BIN_BZIMAGE is not set
+BR2_LINUX_BIN_UIMAGE=y
+# BR2_LINUX_BIN_VMLINUX is not set
+# BR2_LINUX_BIN_ZIMAGE is not set
+# BR2_LINUX_BIN_CUSTOM is not set
+
+#
+# Destinations for linux kernel binaries
+#
+BR2_LINUX_COPYTO_ROOTFS=y
+BR2_LINUX_COPYTO_TFTPBOOT=y
+BR2_LINUX_COPYTO=""
+# BR2_LINUX_COPY_CONFIGURATION is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.8.2
+# Sun Dec 23 12:11:59 2007
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_NITPICK is not set
+# CONFIG_DESKTOP is not set
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_GETOPT_LONG=y
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+CONFIG_FEATURE_HAVE_RPC=y
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_BUILD_LIBBUSYBOX=y
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+CONFIG_INCLUDE_SUSv2=y
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="/usr/avr32-linux"
+
+#
+# Busybox Library Tuning
+#
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SIZE_VS_SPEED=2
+CONFIG_FEATURE_FAST_TOP=y
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_FANCY_KEYS=y
+# CONFIG_FEATURE_EDITING_VI is not set
+CONFIG_FEATURE_EDITING_HISTORY=100
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+CONFIG_FEATURE_AR_LONG_FILENAMES=y
+CONFIG_BUNZIP2=y
+CONFIG_BZIP2=y
+CONFIG_CPIO=y
+CONFIG_DPKG=y
+CONFIG_DPKG_DEB=y
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+CONFIG_RPM2CPIO=y
+CONFIG_RPM=y
+CONFIG_FEATURE_RPM_BZ2=y
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_LZMA=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNLZMA=y
+CONFIG_FEATURE_LZMA_FAST=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Common options for dpkg and dpkg_deb
+#
+CONFIG_FEATURE_DEB_TAR_GZ=y
+CONFIG_FEATURE_DEB_TAR_BZ2=y
+CONFIG_FEATURE_DEB_TAR_LZMA=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAL=y
+CONFIG_CAT=y
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+CONFIG_COMM=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_FEATURE_ENV_LONG_OPTIONS=y
+CONFIG_EXPAND=y
+CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+CONFIG_SPLIT=y
+CONFIG_FEATURE_SPLIT_FANCY=y
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
+CONFIG_STTY=y
+CONFIG_SUM=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNEXPAND=y
+CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+CONFIG_FEATURE_WC_LARGE=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_KBD_MODE=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_CMP=y
+CONFIG_DIFF=y
+CONFIG_FEATURE_DIFF_BINARY=y
+CONFIG_FEATURE_DIFF_DIR=y
+CONFIG_FEATURE_DIFF_MINIMAL=y
+CONFIG_ED=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=1024
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+CONFIG_FEATURE_FIND_DELETE=y
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+# CONFIG_DEBUG_INIT is not set
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_HALT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_FEATURE_ADDUSER_TO_GROUP=y
+CONFIG_DELGROUP=y
+CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+CONFIG_LOGIN=y
+# CONFIG_PAM is not set
+CONFIG_LOGIN_SCRIPTS=y
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+CONFIG_FEATURE_INSMOD_LOAD_MAP=y
+CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
+CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
+
+#
+# Options common to multiple modutils
+#
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+# CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
+# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_EXEC=y
+CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_V0 is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_MOUNT=y
+CONFIG_FEATURE_MOUNT_HELPERS=y
+CONFIG_FEATURE_MOUNT_NFS=y
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_READPROFILE=y
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+CONFIG_BBCONFIG=y
+CONFIG_CHRT=y
+CONFIG_CROND=y
+CONFIG_DEBUG_CROND_OPTION=y
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+# CONFIG_EJECT is not set
+CONFIG_LAST=y
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_FLAGCS=y
+CONFIG_FEATURE_LESS_MARKS=y
+CONFIG_FEATURE_LESS_REGEXP=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
+CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+CONFIG_MICROCOM=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_SETSID=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+CONFIG_TTYSIZE=y
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_FEATURE_IPV6=y
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+CONFIG_ARP=y
+CONFIG_ARPING=y
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+# CONFIG_FAKEIDENTD is not set
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
+CONFIG_HOSTNAME=y
+CONFIG_HTTPD=y
+CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
+CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
+CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+CONFIG_FEATURE_IFUPDOWN_IPV6=y
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+CONFIG_INETD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
+CONFIG_FEATURE_INETD_RPC=y
+# CONFIG_IP is not set
+# CONFIG_FEATURE_IP_ADDRESS is not set
+# CONFIG_FEATURE_IP_LINK is not set
+# CONFIG_FEATURE_IP_ROUTE is not set
+# CONFIG_FEATURE_IP_TUNNEL is not set
+# CONFIG_FEATURE_IP_RULE is not set
+# CONFIG_FEATURE_IP_SHORT_FORMS is not set
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_IPRULE is not set
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+CONFIG_NETSTAT=y
+CONFIG_FEATURE_NETSTAT_WIDE=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_PING6=y
+CONFIG_PSCAN=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+CONFIG_TELNETD=y
+CONFIG_FEATURE_TELNETD_STANDALONE=y
+CONFIG_TFTP=y
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_DEBUG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+CONFIG_APP_UDHCPD=y
+# CONFIG_APP_DHCPRELAY is not set
+# CONFIG_APP_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+CONFIG_APP_UDHCPC=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+# CONFIG_FEATURE_RFC3397 is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+# CONFIG_ZCIP is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+CONFIG_NMETER=y
+CONFIG_PGREP=y
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+CONFIG_PKILL=y
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+CONFIG_FEATURE_TOP_DECIMALS=y
+CONFIG_FEATURE_TOPMEM=y
+CONFIG_UPTIME=y
+CONFIG_WATCH=y
+
+#
+# Shells
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_READ_NCHARS=y
+CONFIG_ASH_READ_TIMEOUT=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+CONFIG_ASH_GETOPTS=y
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_TEST=y
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_CTTYHACK is not set
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_SV is not set
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+
+#
+# ipsvd utilities
+#
+# CONFIG_TCPSVD is not set
+# CONFIG_UDPSVD is not set
--- /dev/null
+# When building a target filesystem, it is desirable to not have to become
+# root and then run 'mknod' a thousand times. Using a device table you can
+# create device nodes and directories "on the fly".
+#
+# This is a sample device table file for use with genext2fs. You can do all
+# sorts of interesting things with a device table file. For example, if you
+# want to adjust the permissions on a particular file you can just add an
+# entry like:
+# /sbin/foobar f 2755 0 0 - - - - -
+# and (assuming the file /sbin/foobar exists) it will be made setuid root
+# (regardless of what its permissions are on the host filesystem.
+# Furthermore, you can use a single table entry to create a many device
+# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] I
+# could just use the following two table entries:
+# /dev/hda b 640 0 0 3 0 0 0 -
+# /dev/hda b 640 0 0 3 1 1 1 15
+#
+# Device table entries take the form of:
+# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+# where name is the file name, type can be one of:
+# f A regular file
+# d Directory
+# c Character special device file
+# b Block special device file
+# p Fifo (named pipe)
+# uid is the user id for the target file, gid is the group id for the target
+# file. The rest of the entries (major, minor, etc) apply only to device
+# special files.
+
+# Have fun
+# -Erik Andersen <andersen@codepoet.org>
+#
+
+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+/dev d 755 0 0 - - - - -
+#/dev/pts d 755 0 0 - - - - -
+#/dev/shm d 755 0 0 - - - - -
+/tmp d 1777 0 0 - - - - -
+/etc d 755 0 0 - - - - -
+/sys d 755 0 0 - - - - -
+/config d 755 0 0 - - - - -
+/proc d 755 0 0 - - - - -
+/lost+found d 700 0 0 - - - - -
+/var/lock d 1777 0 0 - - - - -
+/var/log d 755 0 0 - - - - -
+/var/run d 1777 0 0 - - - - -
+/var/tmp d 1777 0 0 - - - - -
+/home/avr32 d 2755 500 500 - - - - -
+/home/default d 2755 1000 1000 - - - - -
+/media d 755 0 0 - - - - -
+/www d 755 0 0 - - - - -
+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+/bin/busybox f 4755 0 0 - - - - -
+#/etc/shadow f 600 0 0 - - - - -
+/etc/passwd f 644 0 0 - - - - -
+/etc/network/if-up.d d 755 0 0 - - - - -
+/etc/network/if-pre-up.d d 755 0 0 - - - - -
+/etc/network/if-down.d d 755 0 0 - - - - -
+/etc/network/if-post-down.d d 755 0 0 - - - - -
+# uncomment this to allow starting x as non-root
+#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
+# Normal system devices
+#/dev/mem c 640 0 0 1 1 0 0 -
+#/dev/kmem c 640 0 0 1 2 0 0 -
+/dev/null c 666 0 0 1 3 0 0 -
+#/dev/zero c 666 0 0 1 5 0 0 -
+#/dev/random c 666 0 0 1 8 0 0 -
+#/dev/urandom c 666 0 0 1 9 0 0 -
+#/dev/ram b 640 0 0 1 1 0 0 -
+#/dev/ram b 640 0 0 1 0 0 1 4
+#/dev/loop b 640 0 0 7 0 0 1 2
+#/dev/rtc c 640 0 0 10 135 - - -
+/dev/console c 666 0 0 5 1 - - -
+#/dev/tty c 666 0 0 5 0 - - -
+#/dev/tty c 666 0 0 4 0 0 1 8
+#/dev/ttyp c 666 0 0 3 0 0 1 10
+#/dev/ptyp c 666 0 0 2 0 0 1 10
+#/dev/ptmx c 666 0 0 5 2 - - -
+#/dev/ttyP c 666 0 0 57 0 0 1 4
+#/dev/ttyS c 666 0 0 4 64 0 1 4
+#/dev/fb c 640 0 5 29 0 0 32 4
+#/dev/ttySA c 666 0 0 204 5 0 1 3
+#/dev/psaux c 666 0 0 10 1 0 0 -
+#/dev/ppp c 666 0 0 108 0 - - -
+
+# Input stuff
+#/dev/input d 755 0 0 - - - - -
+#/dev/input/mice c 640 0 0 13 63 0 0 -
+#/dev/input/mouse c 660 0 0 13 32 0 1 4
+#/dev/input/event c 660 0 0 13 64 0 1 4
+#/dev/input/js c 660 0 0 13 0 0 1 4
+
+
+# MTD stuff
+#/dev/mtd c 640 0 0 90 0 0 2 4
+#/dev/mtdblock b 640 0 0 31 0 0 1 4
+
+#Tun/tap driver
+#/dev/net d 755 0 0 - - - - -
+#/dev/net/tun c 660 0 0 10 200 - - -
+
+# Audio stuff
+#/dev/audio c 666 0 29 14 4 - - -
+#/dev/audio1 c 666 0 29 14 20 - - -
+#/dev/dsp c 666 0 29 14 3 - - -
+#/dev/dsp1 c 666 0 29 14 19 - - -
+#/dev/sndstat c 666 0 29 14 6 - - -
+
+# User-mode Linux stuff
+#/dev/ubda b 640 0 0 98 0 0 0 -
+#/dev/ubda b 640 0 0 98 1 1 1 15
+
+# IDE Devices
+#/dev/hda b 640 0 0 3 0 0 0 -
+#/dev/hda b 640 0 0 3 1 1 1 15
+#/dev/hdb b 640 0 0 3 64 0 0 -
+#/dev/hdb b 640 0 0 3 65 1 1 15
+#/dev/hdc b 640 0 0 22 0 0 0 -
+#/dev/hdc b 640 0 0 22 1 1 1 15
+#/dev/hdd b 640 0 0 22 64 0 0 -
+#/dev/hdd b 640 0 0 22 65 1 1 15
+#/dev/hde b 640 0 0 33 0 0 0 -
+#/dev/hde b 640 0 0 33 1 1 1 15
+#/dev/hdf b 640 0 0 33 64 0 0 -
+#/dev/hdf b 640 0 0 33 65 1 1 15
+#/dev/hdg b 640 0 0 34 0 0 0 -
+#/dev/hdg b 640 0 0 34 1 1 1 15
+#/dev/hdh b 640 0 0 34 64 0 0 -
+#/dev/hdh b 640 0 0 34 65 1 1 15
+
+# SCSI Devices
+#/dev/sda b 640 0 0 8 0 0 0 -
+#/dev/sda b 640 0 0 8 1 1 1 15
+#/dev/sdb b 640 0 0 8 16 0 0 -
+#/dev/sdb b 640 0 0 8 17 1 1 15
+#/dev/sdc b 640 0 0 8 32 0 0 -
+#/dev/sdc b 640 0 0 8 33 1 1 15
+#/dev/sdd b 640 0 0 8 48 0 0 -
+#/dev/sdd b 640 0 0 8 49 1 1 15
+#/dev/sde b 640 0 0 8 64 0 0 -
+#/dev/sde b 640 0 0 8 65 1 1 15
+#/dev/sdf b 640 0 0 8 80 0 0 -
+#/dev/sdf b 640 0 0 8 81 1 1 15
+#/dev/sdg b 640 0 0 8 96 0 0 -
+#/dev/sdg b 640 0 0 8 97 1 1 15
+#/dev/sdh b 640 0 0 8 112 0 0 -
+#/dev/sdh b 640 0 0 8 113 1 1 15
+#/dev/sg c 640 0 0 21 0 0 1 15
+#/dev/scd b 640 0 0 11 0 0 1 15
+#/dev/st c 640 0 0 9 0 0 1 8
+#/dev/nst c 640 0 0 9 128 0 1 8
+#/dev/st c 640 0 0 9 32 1 1 4
+#/dev/st c 640 0 0 9 64 1 1 4
+#/dev/st c 640 0 0 9 96 1 1 4
+
+# Floppy disk devices
+#/dev/fd b 640 0 0 2 0 0 1 2
+#/dev/fd0d360 b 640 0 0 2 4 0 0 -
+#/dev/fd1d360 b 640 0 0 2 5 0 0 -
+#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
+#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
+#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
+#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
+#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
+#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
+
+# All the proprietary cdrom devices in the world
+#/dev/aztcd b 640 0 0 29 0 0 0 -
+#/dev/bpcd b 640 0 0 41 0 0 0 -
+#/dev/capi20 c 640 0 0 68 0 0 1 2
+#/dev/cdu31a b 640 0 0 15 0 0 0 -
+#/dev/cdu535 b 640 0 0 24 0 0 0 -
+#/dev/cm206cd b 640 0 0 32 0 0 0 -
+#/dev/sjcd b 640 0 0 18 0 0 0 -
+#/dev/sonycd b 640 0 0 15 0 0 0 -
+#/dev/gscd b 640 0 0 16 0 0 0 -
+#/dev/sbpcd b 640 0 0 25 0 0 0 -
+#/dev/sbpcd b 640 0 0 25 0 0 1 4
+#/dev/mcd b 640 0 0 23 0 0 0 -
+#/dev/optcd b 640 0 0 17 0 0 0 -
+
--- /dev/null
+>From 9c5fa914202d20756c56e0c4fd76035ed8f8ced8 Mon Sep 17 00:00:00 2001
+From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Mon, 6 Aug 2007 08:31:14 +0200
+Subject: [PATCH 1/1] Add gpio_mouse board setup to atstk1000 board
+
+This patch adds a gpio_mouse_platform_data to the atstk1000 board code and
+registers a gpio_mouse platform_device. This will enable a GPIO mouse on header
+J1 on GPIO of the ATSTK1000 development kit. The board code is enabled/disabled
+in menuconfig.
+
+By connecting J1 (GPIO) to J25 (SWITCH) you can use the following keys to
+simulate a mouse:
+
+SW0: right
+SW1: down
+SW2: up
+SW3: left
+SW5: right button
+SW6: middle button
+SW7: left button
+
+Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+---
+ arch/avr32/boards/atstk1000/Kconfig | 16 ++++++++++
+ arch/avr32/boards/atstk1000/atstk1002.c | 48 +++++++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+), 0 deletions(-)
+
+diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
+index 718578f..d99d4bd 100644
+--- a/arch/avr32/boards/atstk1000/Kconfig
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -52,6 +52,22 @@ config BOARD_ATSTK100X_SPI1
+ GPIO lines and accessed through the J1 jumper block. Say "y"
+ here to configure that SPI controller.
+
++config BOARD_ATSTK1002_GPIO_MOUSE
++ bool "Configure gpio_mouse on GPIO J1 header"
++ depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ help
++ Enable gpio_mouse board configuration on GPIO 0 to 7. Connecting a
++ 10-pin flat cable from J1 (GPIO) to J25 (SWITCH) will let a user give
++ mouse inputs using the the switches SW0 to SW7.
++
++ SW0: right
++ SW1: down
++ SW2: up
++ SW3: left
++ SW5: right button
++ SW6: middle button
++ SW7: left button
++
+ config BOARD_ATSTK1000_J2_LED
+ bool
+ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
+diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
+index c958fd4..c7560e5 100644
+--- a/arch/avr32/boards/atstk1000/atstk1002.c
++++ b/arch/avr32/boards/atstk1000/atstk1002.c
+@@ -16,6 +16,7 @@
+ #include <linux/types.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/at73c213.h>
++#include <linux/gpio_mouse.h>
+
+ #include <video/atmel_lcdc.h>
+
+@@ -100,6 +101,49 @@ static struct mci_platform_data __initdata mci0_data = {
+ .cs = 4,
+ };
+
++#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
++static struct gpio_mouse_platform_data gpio_mouse0_data = {
++ .polarity = GPIO_MOUSE_POLARITY_ACT_LOW,
++ {
++ {
++ .up = GPIO_PIN_PB(2),
++ .down = GPIO_PIN_PB(1),
++ .left = GPIO_PIN_PB(3),
++ .right = GPIO_PIN_PB(0),
++ .bleft = GPIO_PIN_PB(7),
++ .bmiddle = GPIO_PIN_PB(6),
++ .bright = GPIO_PIN_PB(5),
++ },
++ },
++ .scan_ms = 10,
++};
++
++static struct platform_device gpio_mouse0_device = {
++ .name = "gpio_mouse",
++ .id = 0,
++ .dev = {
++ .platform_data = &gpio_mouse0_data,
++ },
++};
++
++static void __init add_device_gpio_mouse0(void)
++{
++ struct platform_device *pdev = &gpio_mouse0_device;
++ struct gpio_mouse_platform_data *data = pdev->dev.platform_data;
++
++ at32_select_gpio(data->up, 0);
++ at32_select_gpio(data->down, 0);
++ at32_select_gpio(data->left, 0);
++ at32_select_gpio(data->right, 0);
++
++ at32_select_gpio(data->bleft, 0);
++ at32_select_gpio(data->bmiddle, 0);
++ at32_select_gpio(data->bright, 0);
++
++ platform_device_register(pdev);
++}
++#endif
++
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -269,6 +313,10 @@ static int __init atstk1002_init(void)
+ atstk1000_setup_j2_leds();
+ atstk1002_setup_extdac();
+
++#ifdef CONFIG_BOARD_ATSTK1002_GPIO_MOUSE
++ add_device_gpio_mouse0();
++#endif
++
+ return 0;
+ }
+ postcore_initcall(atstk1002_init);
+--
+1.5.2.3
+
--- /dev/null
+state.at73c213_0 {
+ control.1 {
+ comment.access 'read write'
+ comment.type INTEGER
+ comment.count 2
+ comment.range '0 - 31'
+ iface MIXER
+ name 'Master Playback Volume'
+ value.0 21
+ value.1 21
+ }
+ control.2 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 2
+ iface MIXER
+ name 'Master Playback Switch'
+ value.0 true
+ value.1 true
+ }
+ control.3 {
+ comment.access 'read write'
+ comment.type INTEGER
+ comment.count 2
+ comment.range '0 - 31'
+ iface MIXER
+ name 'PCM Playback Volume'
+ value.0 21
+ value.1 21
+ }
+ control.4 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 2
+ iface MIXER
+ name 'PCM Playback Switch'
+ value.0 true
+ value.1 true
+ }
+ control.5 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 1
+ iface MIXER
+ name 'Mono PA Playback Switch'
+ value true
+ }
+ control.6 {
+ comment.access 'read write'
+ comment.type INTEGER
+ comment.count 1
+ comment.range '0 - 14'
+ iface MIXER
+ name 'PA Playback Volume'
+ value 10
+ }
+ control.7 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 1
+ iface MIXER
+ name 'PA High Gain Playback Switch'
+ value true
+ }
+ control.8 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 1
+ iface MIXER
+ name 'PA Playback Switch'
+ value true
+ }
+ control.9 {
+ comment.access 'read write'
+ comment.type INTEGER
+ comment.count 1
+ comment.range '14 - 31'
+ iface MIXER
+ name 'Aux Capture Volume'
+ value 14
+ }
+ control.10 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 1
+ iface MIXER
+ name 'Aux Capture Switch'
+ value false
+ }
+ control.11 {
+ comment.access 'read write'
+ comment.type INTEGER
+ comment.count 2
+ comment.range '14 - 31'
+ iface MIXER
+ name 'Line Capture Volume'
+ value.0 14
+ value.1 14
+ }
+ control.12 {
+ comment.access 'read write'
+ comment.type BOOLEAN
+ comment.count 1
+ iface MIXER
+ name 'Line Capture Switch'
+ value false
+ }
+}
--- /dev/null
+# servers to check. (Separate multiple servers with spaces.)
+NTPSERVERS="pool.ntp.org"
+#
+# additional options for ntpdate
+#NTPOPTIONS="-v"
+NTPOPTIONS="-u"
--- /dev/null
+# Configuration file for dnsmasq.
+#
+# Format is one option per line, legal options are the same
+# as the long options legal on the command line. See
+# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
+
+# The following two options make you a better netizen, since they
+# tell dnsmasq to filter out queries which the public DNS cannot
+# answer, and which load the servers (especially the root servers)
+# uneccessarily. If you have a dial-on-demand link they also stop
+# these requests from bringing up the link uneccessarily.
+
+# Never forward plain names (without a dot or domain part)
+domain-needed
+# Never forward addresses in the non-routed address spaces.
+bogus-priv
+
+
+# Uncomment this to filter useless windows-originated DNS requests
+# which can trigger dial-on-demand links needlessly.
+# Note that (amongst other things) this blocks all SRV requests,
+# so don't use it if you use eg Kerberos.
+# This option only affects forwarding, SRV records originating for
+# dnsmasq (via srv-host= lines) are not suppressed by it.
+#filterwin2k
+
+# Change this line if you want dns to get its upstream servers from
+# somewhere other that /etc/resolv.conf
+#resolv-file=
+
+# By default, dnsmasq will send queries to any of the upstream
+# servers it knows about and tries to favour servers to are known
+# to be up. Uncommenting this forces dnsmasq to try each query
+# with each server strictly in the order they appear in
+# /etc/resolv.conf
+#strict-order
+
+# If you don't want dnsmasq to read /etc/resolv.conf or any other
+# file, getting its servers from this file instead (see below), then
+# uncomment this
+#no-resolv
+
+# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
+# files for changes and re-read them then uncomment this.
+#no-poll
+
+# Add other name servers here, with domain specs if they are for
+# non-public domains.
+#server=/localnet/192.168.0.1
+
+# Add local-only domains here, queries in these domains are answered
+# from /etc/hosts or DHCP only.
+#local=/localnet/
+
+# Add domains which you want to force to an IP address here.
+# The example below send any host in doubleclick.net to a local
+# webserver.
+#address=/doubleclick.net/127.0.0.1
+
+# If you want dnsmasq to change uid and gid to something other
+# than the default, edit the following lines.
+user=dnsmasq
+#group=
+
+# If you want dnsmasq to listen for DHCP and DNS requests only on
+# specified interfaces (and the loopback) give the name of the
+# interface (eg eth0) here.
+# Repeat the line for more than one interface.
+interface=eth1
+# Or you can specify which interface _not_ to listen on
+except-interface=eth0
+# Or which to listen on by address (remember to include 127.0.0.1 if
+# you use this.)
+#listen-address=
+# If you want dnsmasq to provide only DNS service on an interface,
+# configure it as shown above, and then use the following line to
+# disable DHCP on it.
+#no-dhcp-interface=
+
+# On systems which support it, dnsmasq binds the wildcard address,
+# even when it is listening on only some interfaces. It then discards
+# requests that it shouldn't reply to. This has the advantage of
+# working even when interfaces come and go and change address. If you
+# want dnsmasq to really bind only the interfaces it is listening on,
+# uncomment this option. About the only time you may need this is when
+# running another nameserver on the same machine.
+#bind-interfaces
+
+# If you don't want dnsmasq to read /etc/hosts, uncomment the
+# following line.
+#no-hosts
+# or if you want it to read another file, as well as /etc/hosts, use
+# this.
+addn-hosts=/etc/hosts.dnsmasq
+
+# Set this (and domain: see below) if you want to have a domain
+# automatically added to simple names in a hosts-file.
+#expand-hosts
+
+# Set the domain for dnsmasq. this is optional, but if it is set, it
+# does the following things.
+# 1) Allows DHCP hosts to have fully qualified domain names, as long
+# as the domain part matches this setting.
+# 2) Sets the "domain" DHCP option thereby potentially setting the
+# domain of all systems configured by DHCP
+# 3) Provides the domain part for "expand-hosts"
+domain=example.net
+
+# Uncomment this to enable the integrated DHCP server, you need
+# to supply the range of addresses available for lease and optionally
+# a lease time. If you have more than one network, you will need to
+# repeat this for each network on which you want to supply DHCP
+# service.
+#dhcp-range=192.168.0.50,192.168.0.150,12h
+
+# This is an example of a DHCP range where the netmask is given. This
+# is needed for networks we reach the dnsmasq DHCP server via a relay
+# agent. If you don't know what a DHCP relay agent is, you probably
+# don't need to worry about this.
+dhcp-range=10.0.0.20,10.0.0.254,255.255.255.0,72h
+
+# This is an example of a DHCP range with a network-id, so that
+# some DHCP options may be set only for this network.
+#dhcp-range=red,192.168.0.50,192.168.0.150
+
+# Supply parameters for specified hosts using DHCP. There are lots
+# of valid alternatives, so we will give examples of each. Note that
+# IP addresses DO NOT have to be in the range given above, they just
+# need to be on the same network. The order of the parameters in these
+# do not matter, it's permissble to give name,adddress and MAC in any order
+
+# Always allocate the host with ethernet address 11:22:33:44:55:66
+# The IP address 192.168.0.60
+#dhcp-host=11:22:33:44:55:66,192.168.0.60
+
+# Always set the name of the host with hardware address
+# 11:22:33:44:55:66 to be "fred"
+#dhcp-host=11:22:33:44:55:66,fred
+
+# Always give the host with ethernet address 11:22:33:44:55:66
+# the name fred and IP address 192.168.0.60 and lease time 45 minutes
+#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
+
+# Give the machine which says it's name is "bert" IP address
+# 192.168.0.70 and an infinite lease
+#dhcp-host=bert,192.168.0.70,infinite
+
+# Always give the host with client identifier 01:02:02:04
+# the IP address 192.168.0.60
+#dhcp-host=id:01:02:02:04,192.168.0.60
+
+# Always give the host with client identifier "marjorie"
+# the IP address 192.168.0.60
+#dhcp-host=id:marjorie,192.168.0.60
+
+# Enable the address given for "judge" in /etc/hosts
+# to be given to a machine presenting the name "judge" when
+# it asks for a DHCP lease.
+#dhcp-host=judge
+
+# Never offer DHCP service to a machine whose ethernet
+# address is 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,ignore
+
+# Ignore any client-id presented by the machine with ethernet
+# address 11:22:33:44:55:66. This is useful to prevent a machine
+# being treated differently when running under different OS's or
+# between PXE boot and OS boot.
+#dhcp-host=11:22:33:44:55:66,id:*
+
+# Send extra options which are tagged as "red" to
+# the machine with ethernet address 11:22:33:44:55:66
+#dhcp-host=11:22:33:44:55:66,net:red
+
+# Send extra options which are tagged as "red" to
+# any machine with ethernet address starting 11:22:33:
+#dhcp-host=11:22:33:*:*:*,net:red
+
+# Send extra options which are tagged as "red" to any machine whose
+# DHCP vendorclass string includes the substring "Linux"
+#dhcp-vendorclass=red,Linux
+
+# Send extra options which are tagged as "red" to any machine one
+# of whose DHCP userclass strings includes the substring "accounts"
+#dhcp-userclass=red,accounts
+
+# Send extra options which are tagged as "red" to any machine whose
+# MAC address matches the pattern.
+#dhcp-mac=red,00:60:8C:*:*:*
+
+# If this line is uncommented, dnsmasq will read /etc/ethers and act
+# on the ethernet-address/IP pairs found there just as if they had
+# been given as --dhcp-host options. Useful if you keep
+# MAC-address/host mappings there for other purposes.
+read-ethers
+
+# Send options to hosts which ask for a DHCP lease.
+# See RFC 2132 for details of available options.
+# Note that all the common settings, such as netmask and
+# broadcast address, DNS server and default route, are given
+# sane defaults by dnsmasq. You very likely will not need any
+# any dhcp-options. If you use Windows clients and Samba, there
+# are some options which are recommended, they are detailed at the
+# end of this section.
+# For reference, the common options are:
+# subnet mask - 1
+# default router - 3
+# DNS server - 6
+# broadcast address - 28
+
+# Override the default route supplied by dnsmasq, which assumes the
+# router is the same machine as the one running dnsmasq.
+#dhcp-option=3,1.2.3.4
+
+# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
+#dhcp-option=42,192.168.0.4,10.10.0.5
+
+# Set the NTP time server address to be the same machine as
+# is running dnsmasq
+dhcp-option=42,0.0.0.0
+
+# Set the NIS domain name to "welly"
+#dhcp-option=40,welly
+
+# Set the default time-to-live to 50
+#dhcp-option=23,50
+
+# Set the "all subnets are local" flag
+#dhcp-option=27,1
+
+# Send the etherboot magic flag and then etherboot options (a string).
+#dhcp-option=128,e4:45:74:68:00:00
+#dhcp-option=129,NIC=eepro100
+
+# Specify an option which will only be sent to the "red" network
+# (see dhcp-range for the declaration of the "red" network)
+#dhcp-option=red,42,192.168.1.1
+
+# The following DHCP options set up dnsmasq in the same way as is specified
+# for the ISC dhcpcd in
+# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
+# adapted for a typical dnsmasq installation where the host running
+# dnsmasq is also the host running samba.
+# you may want to uncomment them if you use Windows clients and Samba.
+dhcp-option=19,0 # option ip-forwarding off
+dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
+dhcp-option=45,0.0.0.0 # netbios datagram distribution server
+dhcp-option=46,8 # netbios node type
+dhcp-option=47 # empty netbios scope.
+
+# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
+# probably doesn't support this......
+#dhcp-option=119,eng.apple.com,marketing.apple.com
+
+# Send RFC-3442 classless static routes (note the netmask encoding)
+#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
+
+# Send encapsulated vendor-class specific options. The vendor-class
+# is sent as DHCP option 60, and all the options marked with the
+# vendor class are send encapsulated in DHCP option 43. The meaning of
+# the options is defined by the vendor-class. This example sets the
+# mtftp address to 0.0.0.0 for PXEClients
+#dhcp-option=vendor:PXEClient,1,0.0.0.0
+
+# Set the boot filename and tftpd server name and address
+# for BOOTP. You will only need this is you want to
+# boot machines over the network.
+#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
+
+# Set the limit on DHCP leases, the default is 150
+#dhcp-lease-max=150
+
+# The DHCP server needs somewhere on disk to keep its lease database.
+# This defaults to a sane location, but if you want to change it, use
+# the line below.
+dhcp-leasefile=/var/lib/dnsmasq/dnsmasq.leases
+
+# Set the DHCP server to authoritative mode. In this mode it will barge in
+# and take over the lease for any client which broadcasts on the network,
+# whether it has a record of the lease or not. This avoids long timeouts
+# when a machine wakes up on a new network. DO NOT enable this if there's
+# the slighest chance that you might end up accidentally configuring a DHCP
+# server for your campus/company accidentally. The ISC server uses the same
+# the same option, and this URL provides more information:
+# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php
+dhcp-authoritative
+
+# Run an executable when a DHCP lease is created or destroyed.
+# The arguments sent to the script are "add" or "del",
+# then the MAC address, the IP address and finally the hostname
+# if there is one.
+#dhcp-script=/bin/echo
+
+# Set the cachesize here.
+#cache-size=150
+
+# If you want to disable negative caching, uncomment this.
+#no-negcache
+
+# Normally responses which come form /etc/hosts and the DHCP lease
+# file have Time-To-Live set as zero, which conventionally means
+# do not cache further. If you are happy to trade lower load on the
+# server for potentially stale date, you can set a time-to-live (in
+# seconds) here.
+#local-ttl=
+
+# If you want dnsmasq to detect attempts by Verisign to send queries
+# to unregistered .com and .net hosts to its sitefinder service and
+# have dnsmasq instead return the correct NXDOMAIN response, uncomment
+# this line. You can add similar lines to do the same for other
+# registries which have implemented wildcard A records.
+#bogus-nxdomain=64.94.110.11
+
+# If you want to fix up DNS results from upstream servers, use the
+# alias option. This only works for IPv4.
+# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
+#alias=1.2.3.4,5.6.7.8
+# and this maps 1.2.3.x to 5.6.7.x
+#alias=1.2.3.0,5.6.7.0,255.255.255.0
+
+
+# Change these lines if you want dnsmasq to serve MX records.
+
+# Return an MX record named "maildomain.com" with target
+# servermachine.com and preference 50
+#mx-host=maildomain.com,servermachine.com,50
+
+# Set the default target for MX records created using the localmx option.
+#mx-target=servermachine.com
+
+# Return an MX record pointing to the mx-target for all local
+# machines.
+#localmx
+
+# Return an MX record pointing to itself for all local machines.
+#selfmx
+
+# Change the following lines if you want dnsmasq to serve SRV
+# records. These are useful if you want to serve ldap requests for
+# Active Directory and other windows-originated DNS requests.
+# See RFC 2782.
+# You may add multiple srv-host lines.
+# The fields are <name>,<target>,<port>,<priority>,<weight>
+# If the domain part if missing from the name (so that is just has the
+# service and protocol sections) then the domain given by the domain=
+# config option is used. (Note that expand-hosts does not need to be
+# set for this to work.)
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 289
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
+
+# A SRV record sending LDAP for the example.com domain to
+# ldapserver.example.com port 289 (using domain=)
+#domain=example.com
+#srv-host=_ldap._tcp,ldapserver.example.com,389
+
+# Two SRV records for LDAP, each with different priorities
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
+#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
+
+# A SRV record indicating that there is no LDAP server for the domain
+# example.com
+#srv-host=_ldap._tcp.example.com
+
+
+# Change the following lines to enable dnsmasq to serve TXT records.
+# These are used for things like SPF and zeroconf. (Note that the
+# domain-name expansion done for SRV records _does_not
+# occur for TXT records.)
+
+#Example SPF.
+#txt-record=example.com,v=spf1 a -all
+
+#Example zeroconf
+#txt-record=_http._tcp.example.com,name=value,paper=A4
+
+
+# For debugging purposes, log each DNS query as it passes through
+# dnsmasq.
+#log-queries
+
+# Include a another lot of configuration options.
+#conf-file=/etc/dnsmasq.more.conf
+
--- /dev/null
+mode "320x240-68"
+ # D: 6.891 MHz, H: 17.852 kHz, V: 68.400 Hz
+ geometry 320 240 320 240 24
+ timings 145116 17 33 10 10 16 1
+endmode
--- /dev/null
+# /etc/fstab: static file system information.
+#
+# <file system> <mount pt> <type> <options> <dump> <pass>
--- /dev/null
+root::0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+kmem:x:9:
+wheel:x:10:root
+dialout:x:20:
+utmp:x:43:
+staff:x:50:
+www-data::51:
+ftp::52:
+haldaemon:x:68:
+dbus:x:81:
+audio::101:
+users::500:
+default::1000:
+nogroup::65534:
--- /dev/null
+stk1000.example.net
--- /dev/null
+127.0.0.1 localhost.localdomain localhost
+127.0.1.1 stk1000.example.net stk1000
+
+# The following lines are desirable for IPv6 capable hosts
+::1 localhost
+::1 ip6-localhost ip6-loopback
+::1 stk1000.example.net stk1000
+fe00::0 ip6-localnet
+ff00::0 ip6-mcastprefix
+ff02::1 ip6-allnodes
+ff02::2 ip6-allrouters
+ff02::3 ip6-allhosts
--- /dev/null
+# Local server
+10.0.0.1 stk1000.example.net
+10.0.0.1 hostmaster.example.net
+10.0.0.1 ftp.example.net
+10.0.0.1 ns.example.net
+10.0.0.1 ssh.example.net
+10.0.0.1 samba.example.net
+10.0.0.1 telnet.example.net
+10.0.0.1 www.example.net
+
+# DHCP pool
+10.0.0.20 dhcp-020.example.net
+10.0.0.21 dhcp-021.example.net
+10.0.0.22 dhcp-022.example.net
+10.0.0.23 dhcp-023.example.net
+10.0.0.24 dhcp-024.example.net
+10.0.0.25 dhcp-025.example.net
+10.0.0.26 dhcp-026.example.net
+10.0.0.27 dhcp-027.example.net
+10.0.0.28 dhcp-028.example.net
+10.0.0.29 dhcp-029.example.net
+10.0.0.30 dhcp-030.example.net
+10.0.0.31 dhcp-031.example.net
+10.0.0.32 dhcp-032.example.net
+10.0.0.33 dhcp-033.example.net
+10.0.0.34 dhcp-034.example.net
+10.0.0.35 dhcp-035.example.net
+10.0.0.36 dhcp-036.example.net
+10.0.0.37 dhcp-037.example.net
+10.0.0.38 dhcp-038.example.net
+10.0.0.39 dhcp-039.example.net
+10.0.0.40 dhcp-040.example.net
+10.0.0.41 dhcp-041.example.net
+10.0.0.42 dhcp-042.example.net
+10.0.0.43 dhcp-043.example.net
+10.0.0.44 dhcp-044.example.net
+10.0.0.45 dhcp-045.example.net
+10.0.0.46 dhcp-046.example.net
+10.0.0.47 dhcp-047.example.net
+10.0.0.48 dhcp-048.example.net
+10.0.0.49 dhcp-049.example.net
+10.0.0.50 dhcp-050.example.net
+10.0.0.51 dhcp-051.example.net
+10.0.0.52 dhcp-052.example.net
+10.0.0.53 dhcp-053.example.net
+10.0.0.54 dhcp-054.example.net
+10.0.0.55 dhcp-055.example.net
+10.0.0.56 dhcp-056.example.net
+10.0.0.57 dhcp-057.example.net
+10.0.0.58 dhcp-058.example.net
+10.0.0.59 dhcp-059.example.net
+10.0.0.60 dhcp-060.example.net
+10.0.0.61 dhcp-061.example.net
+10.0.0.62 dhcp-062.example.net
+10.0.0.63 dhcp-063.example.net
+10.0.0.64 dhcp-064.example.net
+10.0.0.65 dhcp-065.example.net
+10.0.0.66 dhcp-066.example.net
+10.0.0.67 dhcp-067.example.net
+10.0.0.68 dhcp-068.example.net
+10.0.0.69 dhcp-069.example.net
+10.0.0.70 dhcp-070.example.net
+10.0.0.71 dhcp-071.example.net
+10.0.0.72 dhcp-072.example.net
+10.0.0.73 dhcp-073.example.net
+10.0.0.74 dhcp-074.example.net
+10.0.0.75 dhcp-075.example.net
+10.0.0.76 dhcp-076.example.net
+10.0.0.77 dhcp-077.example.net
+10.0.0.78 dhcp-078.example.net
+10.0.0.79 dhcp-079.example.net
+10.0.0.80 dhcp-080.example.net
+10.0.0.81 dhcp-081.example.net
+10.0.0.82 dhcp-082.example.net
+10.0.0.83 dhcp-083.example.net
+10.0.0.84 dhcp-084.example.net
+10.0.0.85 dhcp-085.example.net
+10.0.0.86 dhcp-086.example.net
+10.0.0.87 dhcp-087.example.net
+10.0.0.88 dhcp-088.example.net
+10.0.0.89 dhcp-089.example.net
+10.0.0.90 dhcp-090.example.net
+10.0.0.91 dhcp-091.example.net
+10.0.0.92 dhcp-092.example.net
+10.0.0.93 dhcp-093.example.net
+10.0.0.94 dhcp-094.example.net
+10.0.0.95 dhcp-095.example.net
+10.0.0.96 dhcp-096.example.net
+10.0.0.97 dhcp-097.example.net
+10.0.0.98 dhcp-098.example.net
+10.0.0.99 dhcp-099.example.net
+10.0.0.100 dhcp-100.example.net
+10.0.0.101 dhcp-101.example.net
+10.0.0.102 dhcp-102.example.net
+10.0.0.103 dhcp-103.example.net
+10.0.0.104 dhcp-104.example.net
+10.0.0.105 dhcp-105.example.net
+10.0.0.106 dhcp-106.example.net
+10.0.0.107 dhcp-107.example.net
+10.0.0.108 dhcp-108.example.net
+10.0.0.109 dhcp-109.example.net
+10.0.0.110 dhcp-110.example.net
+10.0.0.111 dhcp-111.example.net
+10.0.0.112 dhcp-112.example.net
+10.0.0.113 dhcp-113.example.net
+10.0.0.114 dhcp-114.example.net
+10.0.0.115 dhcp-115.example.net
+10.0.0.116 dhcp-116.example.net
+10.0.0.117 dhcp-117.example.net
+10.0.0.118 dhcp-118.example.net
+10.0.0.119 dhcp-119.example.net
+10.0.0.120 dhcp-120.example.net
+10.0.0.121 dhcp-121.example.net
+10.0.0.122 dhcp-122.example.net
+10.0.0.123 dhcp-123.example.net
+10.0.0.124 dhcp-124.example.net
+10.0.0.125 dhcp-125.example.net
+10.0.0.126 dhcp-126.example.net
+10.0.0.127 dhcp-127.example.net
+10.0.0.128 dhcp-128.example.net
+10.0.0.129 dhcp-129.example.net
+10.0.0.130 dhcp-130.example.net
+10.0.0.131 dhcp-131.example.net
+10.0.0.132 dhcp-132.example.net
+10.0.0.133 dhcp-133.example.net
+10.0.0.134 dhcp-134.example.net
+10.0.0.135 dhcp-135.example.net
+10.0.0.136 dhcp-136.example.net
+10.0.0.137 dhcp-137.example.net
+10.0.0.138 dhcp-138.example.net
+10.0.0.139 dhcp-139.example.net
+10.0.0.140 dhcp-140.example.net
+10.0.0.141 dhcp-141.example.net
+10.0.0.142 dhcp-142.example.net
+10.0.0.143 dhcp-143.example.net
+10.0.0.144 dhcp-144.example.net
+10.0.0.145 dhcp-145.example.net
+10.0.0.146 dhcp-146.example.net
+10.0.0.147 dhcp-147.example.net
+10.0.0.148 dhcp-148.example.net
+10.0.0.149 dhcp-149.example.net
+10.0.0.150 dhcp-150.example.net
+10.0.0.151 dhcp-151.example.net
+10.0.0.152 dhcp-152.example.net
+10.0.0.153 dhcp-153.example.net
+10.0.0.154 dhcp-154.example.net
+10.0.0.155 dhcp-155.example.net
+10.0.0.156 dhcp-156.example.net
+10.0.0.157 dhcp-157.example.net
+10.0.0.158 dhcp-158.example.net
+10.0.0.159 dhcp-159.example.net
+10.0.0.160 dhcp-160.example.net
+10.0.0.161 dhcp-161.example.net
+10.0.0.162 dhcp-162.example.net
+10.0.0.163 dhcp-163.example.net
+10.0.0.164 dhcp-164.example.net
+10.0.0.165 dhcp-165.example.net
+10.0.0.166 dhcp-166.example.net
+10.0.0.167 dhcp-167.example.net
+10.0.0.168 dhcp-168.example.net
+10.0.0.169 dhcp-169.example.net
+10.0.0.170 dhcp-170.example.net
+10.0.0.171 dhcp-171.example.net
+10.0.0.172 dhcp-172.example.net
+10.0.0.173 dhcp-173.example.net
+10.0.0.174 dhcp-174.example.net
+10.0.0.175 dhcp-175.example.net
+10.0.0.176 dhcp-176.example.net
+10.0.0.177 dhcp-177.example.net
+10.0.0.178 dhcp-178.example.net
+10.0.0.179 dhcp-179.example.net
+10.0.0.180 dhcp-180.example.net
+10.0.0.181 dhcp-181.example.net
+10.0.0.182 dhcp-182.example.net
+10.0.0.183 dhcp-183.example.net
+10.0.0.184 dhcp-184.example.net
+10.0.0.185 dhcp-185.example.net
+10.0.0.186 dhcp-186.example.net
+10.0.0.187 dhcp-187.example.net
+10.0.0.188 dhcp-188.example.net
+10.0.0.189 dhcp-189.example.net
+10.0.0.190 dhcp-190.example.net
+10.0.0.191 dhcp-191.example.net
+10.0.0.192 dhcp-192.example.net
+10.0.0.193 dhcp-193.example.net
+10.0.0.194 dhcp-194.example.net
+10.0.0.195 dhcp-195.example.net
+10.0.0.196 dhcp-196.example.net
+10.0.0.197 dhcp-197.example.net
+10.0.0.198 dhcp-198.example.net
+10.0.0.199 dhcp-199.example.net
+10.0.0.200 dhcp-200.example.net
+10.0.0.201 dhcp-201.example.net
+10.0.0.202 dhcp-202.example.net
+10.0.0.203 dhcp-203.example.net
+10.0.0.204 dhcp-204.example.net
+10.0.0.205 dhcp-205.example.net
+10.0.0.206 dhcp-206.example.net
+10.0.0.207 dhcp-207.example.net
+10.0.0.208 dhcp-208.example.net
+10.0.0.209 dhcp-209.example.net
+10.0.0.210 dhcp-210.example.net
+10.0.0.211 dhcp-211.example.net
+10.0.0.212 dhcp-212.example.net
+10.0.0.213 dhcp-213.example.net
+10.0.0.214 dhcp-214.example.net
+10.0.0.215 dhcp-215.example.net
+10.0.0.216 dhcp-216.example.net
+10.0.0.217 dhcp-217.example.net
+10.0.0.218 dhcp-218.example.net
+10.0.0.219 dhcp-219.example.net
+10.0.0.220 dhcp-220.example.net
+10.0.0.221 dhcp-221.example.net
+10.0.0.222 dhcp-222.example.net
+10.0.0.223 dhcp-223.example.net
+10.0.0.224 dhcp-224.example.net
+10.0.0.225 dhcp-225.example.net
+10.0.0.226 dhcp-226.example.net
+10.0.0.227 dhcp-227.example.net
+10.0.0.228 dhcp-228.example.net
+10.0.0.229 dhcp-229.example.net
+10.0.0.230 dhcp-230.example.net
+10.0.0.231 dhcp-231.example.net
+10.0.0.232 dhcp-232.example.net
+10.0.0.233 dhcp-233.example.net
+10.0.0.234 dhcp-234.example.net
+10.0.0.235 dhcp-235.example.net
+10.0.0.236 dhcp-236.example.net
+10.0.0.237 dhcp-237.example.net
+10.0.0.238 dhcp-238.example.net
+10.0.0.239 dhcp-239.example.net
+10.0.0.240 dhcp-240.example.net
+10.0.0.241 dhcp-241.example.net
+10.0.0.242 dhcp-242.example.net
+10.0.0.243 dhcp-243.example.net
+10.0.0.244 dhcp-244.example.net
+10.0.0.245 dhcp-245.example.net
+10.0.0.246 dhcp-246.example.net
+10.0.0.247 dhcp-247.example.net
+10.0.0.248 dhcp-248.example.net
+10.0.0.249 dhcp-249.example.net
+10.0.0.250 dhcp-250.example.net
+10.0.0.251 dhcp-251.example.net
+10.0.0.252 dhcp-252.example.net
+10.0.0.253 dhcp-253.example.net
+10.0.0.254 dhcp-254.example.net
--- /dev/null
+# Allow all trafic
+A: *
--- /dev/null
+#netbios-ssn stream tcp nowait root.root /usr/sbin/smbd smbd
+#netbios-ns dgram udp wait root.root /usr/sbin/nmbd nmbd
+#swat stream tcp nowait.400 root.root /usr/sbin/swat swat
--- /dev/null
+#!/bin/sh
+
+PROGRAM=/usr/sbin/alsactl
+
+# Exit silently if alsa-utils isn't installed
+[ -x ${PROGRAM} ] || exit 0
+
+echo -n "Saving mixer state: "
+if ${PROGRAM} store; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+IFDOWN=/sbin/ifdown
+
+echo -n "Stopping networking: "
+if ${IFDOWN} -a; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+MOUNT=/bin/mount
+MKDIR=/bin/mkdir
+
+retval=0
+
+mount_fs()
+{
+ if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then
+ return;
+ fi
+
+ if [ "$4" = "" ]; then
+ if ! ${MOUNT} -t $3 $1 $2; then
+ echo " mount $2 failed"
+ retval=1
+ return 1
+ else
+ echo " $2 mounted"
+ fi
+ else
+ if ! ${MOUNT} -t $3 -o $4 $1 $2; then
+ echo " mount $2 failed"
+ retval=1
+ return 1
+ else
+ echo " $2 mounted"
+ fi
+ fi
+
+ return 0
+}
+
+mkdir_fs()
+{
+ if [ "$1" = "" ]; then
+ return;
+ fi
+
+ if ! ${MKDIR} $1; then
+ echo " mkdir $1 failed"
+ retval=1
+ return 1
+ else
+ echo " $1 directory made"
+ fi
+
+ return 0
+}
+
+echo "Mounting virtual filesystems:"
+
+mount_fs proc /proc proc
+mount_fs sys /sys sysfs
+
+if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
+ mkdir_fs /dev/pts
+ mount_fs pts /dev/pts devpts
+ mkdir_fs /dev/shm
+ # g_serial is not detected by mdev.
+ mknod /dev/ttygserial c 127 0
+fi
+
+mount_fs config /config configfs
+mount_fs tmp /tmp tmpfs
+mount_fs run /var/run tmpfs
+mount_fs log /var/log tmpfs
+
+if [ $retval -ne 0 ]; then
+ echo " WARNING: not able to mount all virtual file systems"
+fi
+
+exit $retval
--- /dev/null
+#!/bin/sh
+
+echo -n "Setting up mdev: "
+set -e
+trap 'echo "failed"' EXIT
+/bin/ln -s /proc/self/fd /dev/fd
+/bin/ln -s /proc/self/fd/0 /dev/stdin
+/bin/ln -s /proc/self/fd/1 /dev/stdout
+/bin/ln -s /proc/self/fd/2 /dev/stderr
+/bin/ln -s /proc/kcore /dev/core
+/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
+/sbin/mdev -s
+trap - EXIT
+echo "done"
--- /dev/null
+#!/bin/sh
+
+PROGRAM=/bin/hostname
+
+echo -n "Setting hostname: "
+[ -x ${PROGRAM} ] || (echo " missing"; exit 0)
+
+if [ -f /etc/hostname ]; then
+ HOST="$(cat /etc/hostname)"
+else
+ HOST="localhost.localdomain"
+fi
+
+start() {
+ if ${PROGRAM} "${HOST}"; then
+ echo "'${HOST}'"
+ else
+ echo "failed"
+ exit 1
+ fi
+}
+
+stop() {
+ return 0
+}
+
+restart() {
+ stop
+ start
+}
+
+case "$1" in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ restart|reload)
+ restart
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|restart}"
+ exit 1
+esac
+
+exit $?
--- /dev/null
+#!/bin/sh
+
+FBV=/usr/bin/fbv
+FBSET=/usr/sbin/fbset
+FBMODEFILE="/etc/fb.modes"
+SPLASHFILE="/etc/stk1000bootsplash.jpg"
+
+echo -n "Bootsplash image: "
+if [ ! -x "${FBV}" -o ! -x "${FBSET}" -o \
+ ! -f "${SPLASHFILE}" -o ! -f "${FBMODEFILE}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ! ${FBSET} 320x240-68; then
+ echo "failed"
+ exit 1
+fi
+
+${FBV} ${SPLASHFILE} > /dev/null &
+if [ $? -eq 0 ]; then
+ echo "loaded"
+else
+ echo "failed"
+fi
--- /dev/null
+#!/bin/sh
+
+SYSLOGD=/sbin/syslogd
+
+echo -n "Starting syslogd: "
+if [ ! -x "${SYSLOGD}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ${SYSLOGD}; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
+
+echo -n "Log messages to syslog: "
+if echo 4 4 1 7 > /proc/sys/kernel/printk; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+KLOGD=/sbin/klogd
+
+echo -n "Starting klogd: "
+if [ ! -x "${KLOGD}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ${KLOGD}; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+MODPROBE=/sbin/modprobe
+
+echo -n "Probing modules: "
+if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then
+ echo "missing"
+ exit 1
+else
+ echo
+fi
+
+grep '^[^#]' "/etc/modules" | \
+while read module args; do
+ [ "$module" ] || continue
+ if ${MODPROBE} $module $args; then
+ echo " $module loaded"
+ else
+ echo " $module failed"
+ fi
+done
--- /dev/null
+#!/bin/sh
+
+MOUNT=/bin/mount
+
+echo -n "Mounting local filesystems: "
+if ${MOUNT} -a; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#! /bin/sh
+
+IFUP=/sbin/ifup
+
+echo -n "Network interfaces: "
+if ${IFUP} -a; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+TELNETD=/usr/sbin/telnetd
+
+echo -n "Starting telnetd: "
+if [ ! -x "${TELNETD}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ${TELNETD} -l /bin/sh; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+INETD=/usr/sbin/inetd
+
+echo -n "Starting inetd: "
+if [ ! -x "${INETD}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ${INETD}; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+HTTPD=/usr/sbin/httpd
+
+echo -n "Starting httpd: "
+if [ ! -x "${HTTPD}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ${HTTPD} -h /www; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+NTPDATE=/usr/bin/ntpdate
+
+if [ -f /etc/default/ntpdate ]; then
+ . /etc/default/ntpdate
+else
+ echo "WARNING: missing /etc/default/ntpdate"
+ exit 1
+fi
+
+echo -n "Starting ntpdate: "
+if [ ! -x ${NTPDATE} ]; then
+ echo "missing"
+ echo -n " WARNING: could not syncronize clock, "
+ echo "edit NTPSERVERS in /etc/default/ntpdate."
+ exit 1
+fi
+
+if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then
+ echo "done"
+else
+ echo "failed"
+ echo -n " WARNING: could not syncronize clock, "
+ echo "edit NTPSERVERS in /etc/default/ntpdate."
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+MOUNT=/bin/mount
+
+echo -n "Mounting remote filesystems: "
+if ${MOUNT} -t nfs -a; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+PROGRAM=/usr/sbin/alsactl
+
+# Exit silently if alsa-utils isn't installed
+[ -x ${PROGRAM} ] || exit 0
+
+echo -n "Restoring mixer state: "
+if [ ! -f /etc/asound.state ]; then
+ echo "missing"
+ exit 1
+fi
+
+if ${PROGRAM} restore; then
+ echo "done"
+else
+ echo "failed"
+ exit 1
+fi
--- /dev/null
+#!/bin/sh
+
+echo -n "Get board type for GPIO: "
+if [ ! -e "/etc/release" ]; then
+ echo "missing";
+ exit 1
+fi
+
+BOARD=`cat /etc/release | cut -d ' ' -f1`
+
+if [ "${BOARD}" == "" ]; then
+ echo "none";
+elif [ "${BOARD}" == "NGW" ]; then
+ echo "'${BOARD}'"
+
+ echo -n " boot LED: "
+ if mkdir /config/gpio/bootled > /dev/null 2> /dev/null; then
+ if ! echo 0 > /config/gpio/bootled/gpio_id; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x10000 > /config/gpio/bootled/pin_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x10000 > /config/gpio/bootled/oe_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 1 > /config/gpio/bootled/enabled; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x10000 > /dev/gpio0; then
+ echo "failed"
+ exit 1
+ fi
+
+ echo "done"
+ else
+ echo "failed"
+ exit 1
+ fi
+
+ echo -n " LED A: "
+ if mkdir /config/gpio/leda > /dev/null 2> /dev/null; then
+ if ! echo 0 > /config/gpio/leda/gpio_id; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x80000 > /config/gpio/leda/pin_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x80000 > /config/gpio/leda/oe_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 1 > /config/gpio/leda/enabled; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0 > /dev/gpio1; then
+ echo "failed"
+ exit 1
+ fi
+
+ echo "done"
+ else
+ echo "failed"
+ exit 1
+ fi
+
+ echo -n " LED B: "
+ if mkdir /config/gpio/ledb > /dev/null 2> /dev/null; then
+ if ! echo 4 > /config/gpio/ledb/gpio_id; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x80000 > /config/gpio/ledb/pin_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0x80000 > /config/gpio/ledb/oe_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 1 > /config/gpio/ledb/enabled; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0 > /dev/gpio2; then
+ echo "failed"
+ exit 1
+ fi
+
+ echo "done"
+ else
+ echo "failed"
+ exit 1
+ fi
+elif [ "${BOARD}" == "STK1000" ]; then # end NGW
+ echo "'${BOARD}'"
+
+ echo -n " switches: "
+ if mkdir /config/gpio/switches > /dev/null 2> /dev/null; then
+ if ! echo 1 > /config/gpio/switches/gpio_id; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 0xff > /config/gpio/switches/pin_mask; then
+ echo "failed"
+ exit 1
+ fi
+
+ if ! echo 1 > /config/gpio/switches/enabled; then
+ echo "failed"
+ exit 1
+ fi
+
+ echo "done"
+ else
+ echo "failed"
+ exit 1
+ fi
+else # end STK1000
+ echo "'${BOARD}'"
+ echo " WARNING: no GPIO for this board"
+fi
--- /dev/null
+#!/bin/sh
+
+PROGRAM=/usr/bin/fbv
+SPLASHFILE="/etc/stk1000splash.jpg"
+
+echo -n "Splash image: "
+if [ ! -x "${PROGRAM}" -o ! -f "${SPLASHFILE}" ]; then
+ echo "missing"
+ exit 1
+fi
+
+${PROGRAM} ${SPLASHFILE} > /dev/null &
+if [ $? -eq 0 ]; then
+ echo "loaded"
+else
+ echo "failed"
+fi
--- /dev/null
+#!/bin/sh
+
+echo "Shutting down ..."
+for k in /etc/init.d/K*; do
+ $k stop
+done
--- /dev/null
+#!/bin/sh
+
+for s in /etc/init.d/S*; do
+ if [ -x $s ]; then
+ $s start
+ fi
+done
+
+echo
+echo "STK1000 ready"
+echo
--- /dev/null
+# Inittab for the ATSTK1000 development board
+#
+# Note: BusyBox init doesn't support runlevels. The runlevels field is
+# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
+#
+# Format for each entry: <id>:<runlevels>:<action>:<process>
+#
+# id == tty to run on, or empty for /dev/console
+# runlevels == ignored
+# action == one of sysinit, respawn, askfirst, wait, and once
+# process == program to run
+
+# Run the rcS script after kernel is booted.
+::sysinit:/etc/init.d/rcS
+
+# Run a shell on the first serial port. Comment out if you want a getty instead.
+ttyS0::respawn:-/bin/sh
+
+# Run a shell on the g_serial port (USB gadget device)? This shell will spawn
+# error message if the device is not connected.
+#ttygserial::respawn:-/bin/sh
+
+# Uncomment this to run a getty on the first serial port.
+#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
+ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100
+
+# Run a script on shutdown.
+::shutdown:/etc/init.d/rcK
--- /dev/null
+# mdev.conf for ATSTK1000
+#
+# Syntax:
+# <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>]
+# @: run <CMD> after creating
+# $: run <CMD> before removal
+# *: like @ and $ at the same time
+# <CMD> is run inside /dev using system()
+
+full 0:0 666
+null 0:0 777
+zero 0:0 666
+
+random 0:0 444
+urandom 0:0 444
+
+console 0:5 0600
+kmem 0:9 000
+mem 0:9 0640
+ptmx 0:5 0660
+
+sda.* 0:6 0660
+sdb.* 0:6 0660
+hda.* 0:6 0660
+hdb.* 0:6 0660
+mtd.* 0:6 0660
+mmc.* 0:6 0660
+
+# Move input devices to input directory
+event.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
+mice 0:0 0660 @(mkdir -p input&&mv $MDEV input)
+mouse.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
+
+# Move sound devices to sound directory
+pcm.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
+seq 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
+timer 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
+control.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
+
+tty 0:5 0660
+tty0.* 0:5 0660
+tty1.* 0:5 0660
+tty2.* 0:5 0660
+tty3.* 0:5 0660
+tty4.* 0:5 0660
+tty5.* 0:5 0660
+tty6.* 0:5 0660
+
+ttyS.* 0:20 640
--- /dev/null
+snd-at73c213
+snd-pcm-oss
+gpio_mouse
+mousedev
--- /dev/null
+#
+# MPlayer configuration file
+#
+# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
+# and per user from ~/.mplayer/config, where per-user settings override
+# system-wide settings, all of which are overrriden by the command line.
+#
+# The configuration file settings are the same as the command line
+# options without the preceding '-'.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+
+
+##################
+# video settings #
+##################
+
+# Specify default video driver (see -vo help for a list).
+vo=fbdev2
+
+# Direct rendring, skip double buffering for framebuffer device
+dr=yes
+
+# Use SDL video with the aalib subdriver by default.
+#vo = sdl:aalib
+
+# FBdev driver:
+#
+# mode to use (read from fb.modes)
+#fbmode = 640x480-120
+#
+# location of the fb.modes file
+#fbmodeconfig = /etc/fb.modes
+
+# Specify your monitor timings for the vesa and fbdev video output drivers.
+# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
+# that exceed the capabilities of your monitor, you may damage it.
+#
+# horizontal frequency range (k stands for 1000)
+#monitor-hfreq = 31.5k-50k,70k
+#
+# vertical frequency range
+#monitor-vfreq = 50-90
+#
+# dotclock (or pixelclock) range (m stands for 1000000)
+#monitor-dotclock = 30M-300M
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# Change to a different videomode when going fullscreen.
+#vm=yes
+
+# Override the autodetected color depth, may need 'vm=yes' as well.
+#bpp=0
+
+# Enable software scaling (powerful CPU needed) for video output
+# drivers that do not support hardware scaling.
+#zoom=yes
+
+# standard monitor size, with square pixels
+#monitoraspect=4:3
+
+# Use this for a widescreen monitor, non-square pixels.
+#monitoraspect=16:9
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+
+##################
+# audio settings #
+##################
+
+# Specify default audio driver (see -ao help for a list).
+ao=oss,
+
+# Use SDL audio driver with the esd subdriver by default.
+#ao = sdl:esd
+
+# Specify the mixer device.
+#mixer = /dev/mixer
+
+# Resample the sound to 44100Hz with the lavcresample audio filter.
+#af=lavcresample=44100
+
+# Specify default audio codec (see -ac help for a list).
+ac=mad,
+
+
+##################
+# other settings #
+##################
+
+# Drop frames to preserve audio/video sync.
+#framedrop = yes
+
+# Specify your preferred skin here (skins are searched for in
+# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
+#skin = Abyss
+
+# Resample the font alphamap.
+# 0 plain white fonts
+# 0.75 very narrow black outline (default)
+# 1 narrow black outline
+# 10 bold black outline
+#ffactor = 0.75
+
+# cache settings
+#
+# Use 8MB input cache by default.
+#cache = 8192
+#
+# Prefill 20% of the cache before starting playback.
+#cache-min = 20.0
+#
+# Prefill 50% of the cache before restarting playback after the cache emptied.
+#cache-seek-min = 50
+
+# DVD: Display English subtitles if available.
+#slang = en
+
+# DVD: Play English audio tracks if available.
+#alang = en
+
+
+# You can also include other configuration files.
+#include = /path/to/the/file/you/want/to/include
--- /dev/null
+../proc/mounts
\ No newline at end of file
--- /dev/null
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure Ethernet 0
+auto eth0
+iface eth0 inet dhcp
+
+# Configure Ethernet 1, not enabled by default
+#auto eth1
+iface eth1 inet dhcp
--- /dev/null
+# /etc/ntp.conf, configuration for ntpd
+
+# ntpd will use syslog() if logfile is not defined
+#logfile /var/log/ntpd
+
+driftfile /var/lib/ntp/ntp.drift
+statsdir /var/log/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+# You do need to talk to an NTP server or two (or three).
+#server ntp.your-provider.example
+
+# pool.ntp.org maps to more than 100 low-stratum NTP servers.
+# Your server will pick a different set every time it starts up.
+# *** Please consider joining the pool! ***
+# *** <http://www.pool.ntp.org/#join> ***
+server pool.ntp.org
+server pool.ntp.org
+
+# ... and use the local system clock as a reference if all else fails
+# NOTE: in a local network, set the local stratum of *one* stable server
+# to 10; otherwise your clocks will drift apart if you lose connectivity.
+server 127.127.1.0
+fudge 127.127.1.0 stratum 13
+
+# By default, exchange time with everybody, but don't allow configuration.
+# See /usr/share/doc/ntp-doc/html/accopt.html for details.
+restrict default kod notrap nomodify nopeer noquery
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1 nomodify
+
+# Clients from this (example!) subnet have unlimited access,
+# but only if cryptographically authenticated
+restrict 10.0.0.0 mask 255.255.255.0 notrust
+
+# If you want to provide time to your local subnet, change the next line.
+# (Again, the address is an example only.)
+broadcast 10.0.0.255
+
+# If you want to listen to time broadcasts on your local subnet,
+# de-comment the next lines. Please do this only if you trust everybody
+# on the network!
+#disable auth
+#broadcastclient
--- /dev/null
+root:x:0:0:root:/:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+haldaemon:x:68:68:hald:/:/bin/sh
+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
+ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash
+dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false
+sshd:x:110:65534:Operator:/var/run/sshd:/bin/false
+nobody:x:65534:65534:nobody:/nonexistent:/bin/false
+avr32:x:500:500:Linux User,,,:/home/avr32:/bin/sh
+default:x:1000:1000:Default non-root user:/home/default:/bin/sh
--- /dev/null
+ServerName "ATSTK1002 FTP server"
+ServerType standalone
+DefaultServer on
+
+# Port 21 is the standard FTP port.
+Port 21
+
+# Umask 022 is a good standard umask to prevent new dirs and files
+# from being group and world writable.
+Umask 022
+
+# Note that this ONLY works in standalone mode, in inetd mode you should use an
+# inetd server that allows you to limit maximum number of processes per service
+# (such as inetd).
+MaxInstances 5
+
+# Set the user and group under which the server will run.
+User nobody
+Group nogroup
+
+# To cause every FTP user to be "jailed" (chrooted) into their home
+# directory, uncomment this line.
+#DefaultRoot ~
+
+# Normally, we want files to be overwriteable.
+AllowOverwrite on
+
+# Deny use of SITE CHMOD, uncomment the three lines below.
+#<Limit SITE_CHMOD>
+# DenyAll
+#</Limit>
--- /dev/null
+# /etc/protocols:
+# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $
+#
+# Internet (IP) protocols
+#
+# from: @(#)protocols 5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+#
+# See also http://www.iana.org/assignments/protocol-numbers
+
+ip 0 IP # internet protocol, pseudo protocol number
+#hopopt 0 HOPOPT # hop-by-hop options for ipv6
+icmp 1 ICMP # internet control message protocol
+igmp 2 IGMP # internet group management protocol
+ggp 3 GGP # gateway-gateway protocol
+ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
+st 5 ST # ST datagram mode
+tcp 6 TCP # transmission control protocol
+cbt 7 CBT # CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
+egp 8 EGP # exterior gateway protocol
+igp 9 IGP # any private interior gateway (Cisco: for IGRP)
+bbn-rcc 10 BBN-RCC-MON # BBN RCC Monitoring
+nvp 11 NVP-II # Network Voice Protocol
+pup 12 PUP # PARC universal packet protocol
+argus 13 ARGUS # ARGUS
+emcon 14 EMCON # EMCON
+xnet 15 XNET # Cross Net Debugger
+chaos 16 CHAOS # Chaos
+udp 17 UDP # user datagram protocol
+mux 18 MUX # Multiplexing protocol
+dcn 19 DCN-MEAS # DCN Measurement Subsystems
+hmp 20 HMP # host monitoring protocol
+prm 21 PRM # packet radio measurement protocol
+xns-idp 22 XNS-IDP # Xerox NS IDP
+trunk-1 23 TRUNK-1 # Trunk-1
+trunk-2 24 TRUNK-2 # Trunk-2
+leaf-1 25 LEAF-1 # Leaf-1
+leaf-2 26 LEAF-2 # Leaf-2
+rdp 27 RDP # "reliable datagram" protocol
+irtp 28 IRTP # Internet Reliable Transaction Protocol
+iso-tp4 29 ISO-TP4 # ISO Transport Protocol Class 4
+netblt 30 NETBLT # Bulk Data Transfer Protocol
+mfe-nsp 31 MFE-NSP # MFE Network Services Protocol
+merit-inp 32 MERIT-INP # MERIT Internodal Protocol
+sep 33 SEP # Sequential Exchange Protocol
+3pc 34 3PC # Third Party Connect Protocol
+idpr 35 IDPR # Inter-Domain Policy Routing Protocol
+xtp 36 XTP # Xpress Tranfer Protocol
+ddp 37 DDP # Datagram Delivery Protocol
+idpr-cmtp 38 IDPR-CMTP # IDPR Control Message Transport Proto
+tp++ 39 TP++ # TP++ Transport Protocol
+il 40 IL # IL Transport Protocol
+ipv6 41 IPv6 # IPv6
+sdrp 42 SDRP # Source Demand Routing Protocol
+ipv6-route 43 IPv6-Route # Routing Header for IPv6
+ipv6-frag 44 IPv6-Frag # Fragment Header for IPv6
+idrp 45 IDRP # Inter-Domain Routing Protocol
+rsvp 46 RSVP # Resource ReSerVation Protocol
+gre 47 GRE # Generic Routing Encapsulation
+mhrp 48 MHRP # Mobile Host Routing Protocol
+bna 49 BNA # BNA
+ipv6-crypt 50 IPv6-Crypt # Encryption Header for IPv6
+ipv6-auth 51 IPv6-Auth # Authentication Header for IPv6
+i-nlsp 52 I-NLSP # Integrated Net Layer Security TUBA
+swipe 53 SWIPE # IP with Encryption
+narp 54 NARP # NBMA Address Resolution Protocol
+mobile 55 MOBILE # IP Mobility
+tlsp 56 TLSP # Transport Layer Security Protocol
+skip 57 SKIP # SKIP
+ipv6-icmp 58 IPv6-ICMP # ICMP for IPv6
+ipv6-nonxt 59 IPv6-NoNxt # No Next Header for IPv6
+ipv6-opts 60 IPv6-Opts # Destination Options for IPv6
+# 61 # any host internal protocol
+cftp 62 CFTP # CFTP
+# 63 # any local network
+sat-expak 64 SAT-EXPAK # SATNET and Backroom EXPAK
+kryptolan 65 KRYPTOLAN # Kryptolan
+rvd 66 RVD # MIT Remote Virtual Disk Protocol
+ippc 67 IPPC # Internet Pluribus Packet Core
+# 68 # any distributed file system
+sat-mon 69 SAT-MON # SATNET Monitoring
+visa 70 VISA # VISA Protocol
+ipcv 71 IPCV # Internet Packet Core Utility
+cpnx 72 CPNX # Computer Protocol Network Executive
+cphb 73 CPHB # Computer Protocol Heart Beat
+wsn 74 WSN # Wang Span Network
+pvp 75 PVP # Packet Video Protocol
+br-sat-mon 76 BR-SAT-MON # Backroom SATNET Monitoring
+sun-nd 77 SUN-ND # SUN ND PROTOCOL-Temporary
+wb-mon 78 WB-MON # WIDEBAND Monitoring
+wb-expak 79 WB-EXPAK # WIDEBAND EXPAK
+iso-ip 80 ISO-IP # ISO Internet Protocol
+vmtp 81 VMTP # Versatile Message Transport
+secure-vmtp 82 SECURE-VMTP # SECURE-VMTP
+vines 83 VINES # VINES
+ttp 84 TTP # TTP
+nsfnet-igp 85 NSFNET-IGP # NSFNET-IGP
+dgp 86 DGP # Dissimilar Gateway Protocol
+tcf 87 TCF # TCF
+eigrp 88 EIGRP # Enhanced Interior Routing Protocol (Cisco)
+ospf 89 OSPFIGP # Open Shortest Path First IGP
+sprite-rpc 90 Sprite-RPC # Sprite RPC Protocol
+larp 91 LARP # Locus Address Resolution Protocol
+mtp 92 MTP # Multicast Transport Protocol
+ax.25 93 AX.25 # AX.25 Frames
+ipip 94 IPIP # Yet Another IP encapsulation
+micp 95 MICP # Mobile Internetworking Control Pro.
+scc-sp 96 SCC-SP # Semaphore Communications Sec. Pro.
+etherip 97 ETHERIP # Ethernet-within-IP Encapsulation
+encap 98 ENCAP # Yet Another IP encapsulation
+# 99 # any private encryption scheme
+gmtp 100 GMTP # GMTP
+ifmp 101 IFMP # Ipsilon Flow Management Protocol
+pnni 102 PNNI # PNNI over IP
+pim 103 PIM # Protocol Independent Multicast
+aris 104 ARIS # ARIS
+scps 105 SCPS # SCPS
+qnx 106 QNX # QNX
+a/n 107 A/N # Active Networks
+ipcomp 108 IPComp # IP Payload Compression Protocol
+snp 109 SNP # Sitara Networks Protocol
+compaq-peer 110 Compaq-Peer # Compaq Peer Protocol
+ipx-in-ip 111 IPX-in-IP # IPX in IP
+vrrp 112 VRRP # Virtual Router Redundancy Protocol
+pgm 113 PGM # PGM Reliable Transport Protocol
+# 114 # any 0-hop protocol
+l2tp 115 L2TP # Layer Two Tunneling Protocol
+ddx 116 DDX # D-II Data Exchange
+iatp 117 IATP # Interactive Agent Transfer Protocol
+stp 118 STP # Schedule Transfer
+srp 119 SRP # SpectraLink Radio Protocol
+uti 120 UTI # UTI
+smp 121 SMP # Simple Message Protocol
+sm 122 SM # SM
+ptp 123 PTP # Performance Transparency Protocol
+isis 124 ISIS # ISIS over IPv4
+fire 125 FIRE
+crtp 126 CRTP # Combat Radio Transport Protocol
+crdup 127 CRUDP # Combat Radio User Datagram
+sscopmce 128 SSCOPMCE
+iplt 129 IPLT
+sps 130 SPS # Secure Packet Shield
+pipe 131 PIPE # Private IP Encapsulation within IP
+sctp 132 SCTP # Stream Control Transmission Protocol
+fc 133 FC # Fibre Channel
+# rsvp-e2e-ignore 134 RSVP-E2E-IGNORE
+# 134-254 # Unassigned
+# 255 # Reserved
--- /dev/null
+../tmp/resolv.conf
\ No newline at end of file
--- /dev/null
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# For a step to step guide on installing, configuring and using samba,
+# read the Samba-HOWTO-Collection. This may be obtained from:
+# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
+#
+# Many working examples of smb.conf files can be found in the
+# Samba-Guide which is generated daily and can be downloaded from:
+# http://www.samba.org/samba/docs/Samba-Guide.pdf
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not made any basic syntactic errors.
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
+ workgroup = AVR32
+
+# Network name
+ netbios name = stk1000
+
+# server string is the equivalent of the NT Description field
+ server string = AVR32 STK1000 development kit
+
+# Security mode. Defines in which mode Samba will operate. Possible
+# values are share, user, server, domain and ads. Most people will want
+# user level security. See the Samba-HOWTO-Collection for details.
+ security = user
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+ hosts allow = 10.0.0. 127.
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+ load printers = no
+
+# you may wish to override the location of the printcap file
+; printcap name = /etc/printcap
+
+# on SystemV system setting printcap name to lpstat should allow
+# you to automatically obtain a printer list from the SystemV spool
+# system
+; printcap name = lpstat
+
+# It should not be necessary to specify the print system type unless
+# it is non-standard. Currently supported print systems include:
+# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
+; printing = cups
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+; guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+ debug level = 1
+ syslog = 0
+
+# Put a capping on the size of the log files (in Kb).
+ max log size = 1000
+
+# Use password server option only with security = server
+# The argument list may include:
+# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+# password server = *
+; password server = <NT-Server-Name>
+
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+; realm = MY_REALM
+
+# Backend to store user information in. New installations should
+# use either tdbsam or ldapsam. smbpasswd is available for backwards
+# compatibility. tdbsam requires no further configuration.
+ passdb backend = smbpasswd:/etc/samba/smbpasswd
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+# this line. The included file is read at that point.
+; include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+ interfaces = lo eth0
+
+ socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+ local master = yes
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+ os level = 254
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+ domain master = yes
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+ preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for
+# Windows95 workstations.
+; domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+; logon script = %m.bat
+# run a specific logon batch file per username
+; logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+# %L substitutes for this servers netbios name, %U is username
+# You must uncomment the [Profiles] share below
+; logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+; wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one WINS Server on the network. The default is NO.
+; wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+ dns proxy = no
+
+# These scripts are used on a domain controller or stand-alone
+# machine to add or delete corresponding unix accounts
+; add user script = /usr/sbin/useradd %u
+; add group script = /usr/sbin/groupadd %g
+; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+; delete user script = /usr/sbin/userdel %u
+; delete user from group script = /usr/sbin/deluser %u %g
+; delete group script = /usr/sbin/groupdel %g
+
+# Unix charset on the filesystem
+ unix charset = iso8859-1
+
+# Code page for the client
+# client code page = 850
+
+#============================ Share Definitions ==============================
+[homes]
+ comment = Home Directories
+ browseable = no
+ writable = yes
+
+[netdisk]
+ comment = Network share on STK1000
+ path = /media
+ read only = no
+ public = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+; comment = Network Logon Service
+; path = /usr/local/samba/lib/netlogon
+; guest ok = yes
+; writable = no
+; share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+; path = /usr/local/samba/profiles
+; browseable = no
+; guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to
+# specifically define each individual printer
+;[printers]
+; comment = All Printers
+; path = /usr/spool/samba
+; browseable = no
+# Set public = yes to allow user 'guest account' to print
+; guest ok = no
+; writable = no
+; printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+; comment = Temporary file space
+; path = /tmp
+; read only = no
+; public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+; comment = Public Stuff
+; path = /home/samba
+; public = yes
+; writable = yes
+; printable = no
+; write list = @staff
+
+# Other examples.
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+; comment = Fred's Printer
+; valid users = fred
+; path = /homes/fred
+; printer = freds_printer
+; public = no
+; writable = no
+; printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+; comment = Fred's Service
+; path = /usr/somewhere/private
+; valid users = fred
+; public = no
+; writable = yes
+; printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %U option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+; comment = PC Directories
+; path = /usr/pc/%m
+; public = no
+; writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+; path = /usr/somewhere/else/public
+; public = yes
+; only guest = yes
+; writable = yes
+; printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+; comment = Mary's and Fred's stuff
+; path = /usr/somewhere/shared
+; valid users = mary fred
+; public = no
+; writable = yes
+; printable = no
+; create mask = 0765
--- /dev/null
+root:0:172DC9BBE870E1B6AAD3B435B51404EE:090A846DE05FDBC2D90864D49620FD7C:[U ]:LCT-4561C217:
--- /dev/null
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+#
+# The latest IANA port assignments can be gotten from
+#
+# http://www.iana.org/assignments/port-numbers
+#
+# The Well Known Ports are those from 0 through 1023.
+# The Registered Ports are those from 1024 through 49151
+# The Dynamic and/or Private Ports are those from 49152 through 65535
+#
+# Kerberos services are for Kerberos v4, and are unofficial. Sites running
+# v5 should uncomment v5 entries and comment v4 entries.
+#
+# $FreeBSD: src/etc/services,v 1.102.8.1 2006/01/29 11:32:48 maxim Exp $
+# From: @(#)services 5.8 (Berkeley) 5/9/91
+#
+# WELL KNOWN PORT NUMBERS
+#
+rtmp 1/ddp #Routing Table Maintenance Protocol
+tcpmux 1/tcp #TCP Port Service Multiplexer
+tcpmux 1/udp #TCP Port Service Multiplexer
+nbp 2/ddp #Name Binding Protocol
+compressnet 2/tcp #Management Utility
+compressnet 2/udp #Management Utility
+compressnet 3/tcp #Compression Process
+compressnet 3/udp #Compression Process
+echo 4/ddp #AppleTalk Echo Protocol
+rje 5/tcp #Remote Job Entry
+rje 5/udp #Remote Job Entry
+zip 6/ddp #Zone Information Protocol
+echo 7/tcp
+echo 7/udp
+discard 9/tcp sink null
+discard 9/udp sink null
+systat 11/tcp users #Active Users
+systat 11/udp users #Active Users
+daytime 13/tcp
+daytime 13/udp
+qotd 17/tcp quote #Quote of the Day
+qotd 17/udp quote #Quote of the Day
+msp 18/tcp #Message Send Protocol
+msp 18/udp #Message Send Protocol
+chargen 19/tcp ttytst source #Character Generator
+chargen 19/udp ttytst source #Character Generator
+ftp-data 20/tcp #File Transfer [Default Data]
+ftp-data 20/udp #File Transfer [Default Data]
+ftp 21/tcp #File Transfer [Control]
+ftp 21/udp #File Transfer [Control]
+ssh 22/tcp #Secure Shell Login
+ssh 22/udp #Secure Shell Login
+telnet 23/tcp
+telnet 23/udp
+# 24/tcp any private mail system
+# 24/udp any private mail system
+smtp 25/tcp mail #Simple Mail Transfer
+smtp 25/udp mail #Simple Mail Transfer
+nsw-fe 27/tcp #NSW User System FE
+nsw-fe 27/udp #NSW User System FE
+msg-icp 29/tcp #MSG ICP
+msg-icp 29/udp #MSG ICP
+msg-auth 31/tcp #MSG Authentication
+msg-auth 31/udp #MSG Authentication
+dsp 33/tcp #Display Support Protocol
+dsp 33/udp #Display Support Protocol
+# 35/tcp any private printer server
+# 35/udp any private printer server
+time 37/tcp timserver
+time 37/udp timserver
+rap 38/tcp #Route Access Protocol
+rap 38/udp #Route Access Protocol
+rlp 39/tcp resource #Resource Location Protocol
+rlp 39/udp resource #Resource Location Protocol
+graphics 41/tcp
+graphics 41/udp
+nameserver 42/tcp name #Host Name Server
+nameserver 42/udp name #Host Name Server
+nicname 43/tcp whois
+nicname 43/udp whois
+mpm-flags 44/tcp #MPM FLAGS Protocol
+mpm-flags 44/udp #MPM FLAGS Protocol
+mpm 45/tcp #Message Processing Module [recv]
+mpm 45/udp #Message Processing Module [recv]
+mpm-snd 46/tcp #MPM [default send]
+mpm-snd 46/udp #MPM [default send]
+ni-ftp 47/tcp #NI FTP
+ni-ftp 47/udp #NI FTP
+auditd 48/tcp #Digital Audit Daemon
+auditd 48/udp #Digital Audit Daemon
+tacacs 49/tcp #Login Host Protocol (TACACS)
+tacacs 49/udp #Login Host Protocol (TACACS)
+re-mail-ck 50/tcp #Remote Mail Checking Protocol
+re-mail-ck 50/udp #Remote Mail Checking Protocol
+la-maint 51/tcp #IMP Logical Address Maintenance
+la-maint 51/udp #IMP Logical Address Maintenance
+xns-time 52/tcp #XNS Time Protocol
+xns-time 52/udp #XNS Time Protocol
+domain 53/tcp #Domain Name Server
+domain 53/udp #Domain Name Server
+xns-ch 54/tcp #XNS Clearinghouse
+xns-ch 54/udp #XNS Clearinghouse
+isi-gl 55/tcp #ISI Graphics Language
+isi-gl 55/udp #ISI Graphics Language
+xns-auth 56/tcp #XNS Authentication
+xns-auth 56/udp #XNS Authentication
+mtp 57/tcp # deprecated
+#PROBLEMS!==============================================================
+# 57/tcp any private terminal access
+#PROBLEMS!==============================================================
+# 57/udp any private terminal access
+xns-mail 58/tcp #XNS Mail
+xns-mail 58/udp #XNS Mail
+# 59/tcp any private file service
+# 59/udp any private file service
+ni-mail 61/tcp #NI MAIL
+ni-mail 61/udp #NI MAIL
+acas 62/tcp #ACA Services
+acas 62/udp #ACA Services
+whois++ 63/tcp
+whois++ 63/udp
+covia 64/tcp #Communications Integrator (CI)
+covia 64/udp #Communications Integrator (CI)
+tacacs-ds 65/tcp #TACACS-Database Service
+tacacs-ds 65/udp #TACACS-Database Service
+sql*net 66/tcp #Oracle SQL*NET
+sql*net 66/udp #Oracle SQL*NET
+bootps 67/tcp dhcps #Bootstrap Protocol Server
+bootps 67/udp dhcps #Bootstrap Protocol Server
+bootpc 68/tcp dhcpc #Bootstrap Protocol Client
+bootpc 68/udp dhcpc #Bootstrap Protocol Client
+tftp 69/tcp #Trivial File Transfer
+tftp 69/udp #Trivial File Transfer
+gopher 70/tcp
+gopher 70/udp
+netrjs-1 71/tcp #Remote Job Service
+netrjs-1 71/udp #Remote Job Service
+netrjs-2 72/tcp #Remote Job Service
+netrjs-2 72/udp #Remote Job Service
+netrjs-3 73/tcp #Remote Job Service
+netrjs-3 73/udp #Remote Job Service
+netrjs-4 74/tcp #Remote Job Service
+netrjs-4 74/udp #Remote Job Service
+# 75/tcp any private dial out service
+# 75/udp any private dial out service
+deos 76/tcp #Distributed External Object Store
+deos 76/udp #Distributed External Object Store
+netrjs 77/tcp
+#PROBLEMS!==============================================================
+# 77/tcp any private RJE service
+#PROBLEMS!==============================================================
+# 77/udp any private RJE service
+vettcp 78/tcp
+vettcp 78/udp
+finger 79/tcp
+finger 79/udp
+http 80/tcp www www-http #World Wide Web HTTP
+http 80/udp www www-http #World Wide Web HTTP
+hosts2-ns 81/tcp #HOSTS2 Name Server
+hosts2-ns 81/udp #HOSTS2 Name Server
+xfer 82/tcp #XFER Utility
+xfer 82/udp #XFER Utility
+mit-ml-dev 83/tcp #MIT ML Device
+mit-ml-dev 83/udp #MIT ML Device
+ctf 84/tcp #Common Trace Facility
+ctf 84/udp #Common Trace Facility
+mit-ml-dev 85/tcp #MIT ML Device
+mit-ml-dev 85/udp #MIT ML Device
+mfcobol 86/tcp #Micro Focus Cobol
+mfcobol 86/udp #Micro Focus Cobol
+ttylink 87/tcp
+#PROBLEMS!===========================================================
+# 87/tcp any private terminal link
+#PROBLEMS!===========================================================
+# 87/udp any private terminal link
+kerberos-sec 88/tcp kerberos # krb5 # Kerberos (v5)
+kerberos-sec 88/udp kerberos # krb5 # Kerberos (v5)
+su-mit-tg 89/tcp #SU/MIT Telnet Gateway
+su-mit-tg 89/udp #SU/MIT Telnet Gateway
+dnsix 90/tcp #DNSIX Securit Attribute Token Map
+dnsix 90/udp #DNSIX Securit Attribute Token Map
+mit-dov 91/tcp #MIT Dover Spooler
+mit-dov 91/udp #MIT Dover Spooler
+npp 92/tcp #Network Printing Protocol
+npp 92/udp #Network Printing Protocol
+dcp 93/tcp #Device Control Protocol
+dcp 93/udp #Device Control Protocol
+objcall 94/tcp #Tivoli Object Dispatcher
+objcall 94/udp #Tivoli Object Dispatcher
+supdup 95/tcp
+supdup 95/udp
+dixie 96/tcp #DIXIE Protocol Specification
+dixie 96/udp #DIXIE Protocol Specification
+swift-rvf 97/tcp #Swift Remote Virtural File Protocol
+swift-rvf 97/udp #Swift Remote Virtural File Protocol
+tacnews 98/tcp #TAC News, Unofficial: Red Hat linuxconf
+tacnews 98/udp #TAC News, Unofficial: Red Hat linuxconf
+metagram 99/tcp #Metagram Relay
+metagram 99/udp #Metagram Relay
+newacct 100/tcp #[unauthorized use]
+hostname 101/tcp hostnames #NIC Host Name Server
+hostname 101/udp hostnames #NIC Host Name Server
+iso-tsap 102/tcp tsap #ISO-TSAP Class 0
+iso-tsap 102/udp tsap #ISO-TSAP Class 0
+gppitnp 103/tcp #Genesis Point-to-Point Trans Net
+gppitnp 103/udp #Genesis Point-to-Point Trans Net
+acr-nema 104/tcp #ACR-NEMA Digital Imag. & Comm. 300
+acr-nema 104/udp #ACR-NEMA Digital Imag. & Comm. 300
+csnet-ns 105/tcp cso-ns cso #Mailbox Name Nameserver
+csnet-ns 105/udp cso-ns cso #Mailbox Name Nameserver
+pop3pw 106/tcp 3com-tsmux #Eudora compatible PW changer
+3com-tsmux 106/udp
+rtelnet 107/tcp #Remote Telnet Service
+rtelnet 107/udp #Remote Telnet Service
+snagas 108/tcp #SNA Gateway Access Server
+snagas 108/udp #SNA Gateway Access Server
+pop2 109/tcp postoffice #Post Office Protocol - Version 2
+pop2 109/udp postoffice #Post Office Protocol - Version 2
+pop3 110/tcp #Post Office Protocol - Version 3
+pop3 110/udp #Post Office Protocol - Version 3
+sunrpc 111/tcp rpcbind #SUN Remote Procedure Call
+sunrpc 111/udp rpcbind #SUN Remote Procedure Call
+mcidas 112/tcp #McIDAS Data Transmission Protocol
+mcidas 112/udp #McIDAS Data Transmission Protocol
+auth 113/tcp ident tap #Authentication Service
+auth 113/udp ident tap #Authentication Service
+audionews 114/tcp #Audio News Multicast
+audionews 114/udp #Audio News Multicast
+sftp 115/tcp #Simple File Transfer Protocol
+sftp 115/udp #Simple File Transfer Protocol
+ansanotify 116/tcp #ANSA REX Notify
+ansanotify 116/udp #ANSA REX Notify
+uucp-path 117/tcp #UUCP Path Service
+uucp-path 117/udp #UUCP Path Service
+sqlserv 118/tcp #SQL Services
+sqlserv 118/udp #SQL Services
+nntp 119/tcp usenet #Network News Transfer Protocol
+nntp 119/udp usenet #Network News Transfer Protocol
+cfdptkt 120/tcp
+cfdptkt 120/udp
+erpc 121/tcp #Encore Expedited Remote Pro.Call
+erpc 121/udp #Encore Expedited Remote Pro.Call
+smakynet 122/tcp
+smakynet 122/udp
+ntp 123/tcp #Network Time Protocol
+ntp 123/udp #Network Time Protocol
+ansatrader 124/tcp #ANSA REX Trader
+ansatrader 124/udp #ANSA REX Trader
+locus-map 125/tcp #Locus PC-Interface Net Map Ser
+locus-map 125/udp #Locus PC-Interface Net Map Ser
+unitary 126/tcp #Unisys Unitary Login
+unitary 126/udp #Unisys Unitary Login
+locus-con 127/tcp #Locus PC-Interface Conn Server
+locus-con 127/udp #Locus PC-Interface Conn Server
+gss-xlicen 128/tcp #GSS X License Verification
+gss-xlicen 128/udp #GSS X License Verification
+pwdgen 129/tcp #Password Generator Protocol
+pwdgen 129/udp #Password Generator Protocol
+cisco-fna 130/tcp #cisco FNATIVE
+cisco-fna 130/udp #cisco FNATIVE
+cisco-tna 131/tcp #cisco TNATIVE
+cisco-tna 131/udp #cisco TNATIVE
+cisco-sys 132/tcp #cisco SYSMAINT
+cisco-sys 132/udp #cisco SYSMAINT
+statsrv 133/tcp #Statistics Service
+statsrv 133/udp #Statistics Service
+ingres-net 134/tcp #INGRES-NET Service
+ingres-net 134/udp #INGRES-NET Service
+loc-srv 135/tcp epmap #Location Service
+loc-srv 135/udp epmap #Location Service
+profile 136/tcp #PROFILE Naming System
+profile 136/udp #PROFILE Naming System
+netbios-ns 137/tcp #NETBIOS Name Service
+netbios-ns 137/udp #NETBIOS Name Service
+netbios-dgm 138/tcp #NETBIOS Datagram Service
+netbios-dgm 138/udp #NETBIOS Datagram Service
+netbios-ssn 139/tcp #NETBIOS Session Service
+netbios-ssn 139/udp #NETBIOS Session Service
+emfis-data 140/tcp #EMFIS Data Service
+emfis-data 140/udp #EMFIS Data Service
+emfis-cntl 141/tcp #EMFIS Control Service
+emfis-cntl 141/udp #EMFIS Control Service
+bl-idm 142/tcp #Britton-Lee IDM
+bl-idm 142/udp #Britton-Lee IDM
+imap 143/tcp imap2 imap4 #Interim Mail Access Protocol v2
+imap 143/udp imap2 imap4 #Interim Mail Access Protocol v2
+NeWS 144/tcp # Window System
+NeWS 144/udp # Window System
+#PROBLEMS!==============================================================
+#uma 144/tcp #Universal Management Architecture
+#uma 144/udp #Universal Management Architecture
+#PROBLEMS!==============================================================
+uaac 145/tcp #UAAC Protocol
+uaac 145/udp #UAAC Protocol
+iso-tp0 146/tcp
+iso-tp0 146/udp
+iso-ip 147/tcp
+iso-ip 147/udp
+cronus 148/tcp jargon #CRONUS-SUPPORT
+cronus 148/udp jargon #CRONUS-SUPPORT
+aed-512 149/tcp #AED 512 Emulation Service
+aed-512 149/udp #AED 512 Emulation Service
+sql-net 150/tcp
+sql-net 150/udp
+hems 151/tcp
+hems 151/udp
+bftp 152/tcp #Background File Transfer Program
+bftp 152/udp #Background File Transfer Program
+sgmp 153/tcp
+sgmp 153/udp
+netsc-prod 154/tcp
+netsc-prod 154/udp
+netsc-dev 155/tcp
+netsc-dev 155/udp
+sqlsrv 156/tcp #SQL Service
+sqlsrv 156/udp #SQL Service
+knet-cmp 157/tcp #KNET/VM Command/Message Protocol
+knet-cmp 157/udp #KNET/VM Command/Message Protocol
+pcmail-srv 158/tcp #PCMail Server
+pcmail-srv 158/udp #PCMail Server
+nss-routing 159/tcp
+nss-routing 159/udp
+sgmp-traps 160/tcp
+sgmp-traps 160/udp
+snmp 161/tcp
+snmp 161/udp
+snmptrap 162/tcp snmp-trap
+snmptrap 162/udp snmp-trap
+cmip-man 163/tcp #CMIP/TCP Manager
+cmip-man 163/udp #CMIP/TCP Manager
+cmip-agent 164/tcp #CMIP/TCP Agent
+smip-agent 164/udp #CMIP/TCP Agent
+xns-courier 165/tcp #Xerox
+xns-courier 165/udp #Xerox
+s-net 166/tcp #Sirius Systems
+s-net 166/udp #Sirius Systems
+namp 167/tcp
+namp 167/udp
+rsvd 168/tcp
+rsvd 168/udp
+send 169/tcp
+send 169/udp
+print-srv 170/tcp #Network PostScript
+print-srv 170/udp #Network PostScript
+multiplex 171/tcp #Network Innovations Multiplex
+multiplex 171/udp #Network Innovations Multiplex
+cl/1 172/tcp #Network Innovations CL/1
+cl/1 172/udp #Network Innovations CL/1
+xyplex-mux 173/tcp
+xyplex-mux 173/udp
+mailq 174/tcp
+mailq 174/udp
+vmnet 175/tcp
+vmnet 175/udp
+genrad-mux 176/tcp
+genrad-mux 176/udp
+xdmcp 177/tcp #X Display Manager Control Protocol
+xdmcp 177/udp #X Display Manager Control Protocol
+NextStep 178/tcp nextstep NeXTStep #NextStep Window Server
+NextStep 178/udp nextstep NeXTStep #NextStep Window Server
+bgp 179/tcp #Border Gateway Protocol
+bgp 179/udp #Border Gateway Protocol
+ris 180/tcp #Intergraph
+ris 180/udp #Intergraph
+unify 181/tcp
+unify 181/udp
+audit 182/tcp #Unisys Audit SITP
+audit 182/udp #Unisys Audit SITP
+ocbinder 183/tcp
+ocbinder 183/udp
+ocserver 184/tcp
+ocserver 184/udp
+remote-kis 185/tcp
+remote-kis 185/udp
+kis 186/tcp #KIS Protocol
+kis 186/udp #KIS Protocol
+aci 187/tcp #Application Communication Interface
+aci 187/udp #Application Communication Interface
+mumps 188/tcp #Plus Five's MUMPS
+mumps 188/udp #Plus Five's MUMPS
+qft 189/tcp #Queued File Transport
+qft 189/udp #Queued File Transport
+gacp 190/tcp #Gateway Access Control Protocol
+gacp 190/udp cacp #Gateway Access Control Protocol
+prospero 191/tcp #Prospero Directory Service
+prospero 191/udp #Prospero Directory Service
+osu-nms 192/tcp #OSU Network Monitoring System
+osu-nms 192/udp #OSU Network Monitoring System
+srmp 193/tcp #Spider Remote Monitoring Protocol
+srmp 193/udp #Spider Remote Monitoring Protocol
+irc 194/tcp #Internet Relay Chat Protocol
+irc 194/udp #Internet Relay Chat Protocol
+dn6-nlm-aud 195/tcp #DNSIX Network Level Module Audit
+dn6-nlm-aud 195/udp #DNSIX Network Level Module Audit
+dn6-smm-red 196/tcp #DNSIX Session Mgt Module Audit Redir
+dn6-smm-red 196/udp #DNSIX Session Mgt Module Audit Redir
+dls 197/tcp #Directory Location Service
+dls 197/udp #Directory Location Service
+dls-mon 198/tcp #Directory Location Service Monitor
+dls-mon 198/udp #Directory Location Service Monitor
+smux 199/tcp
+smux 199/udp
+src 200/tcp #IBM System Resource Controller
+src 200/udp #IBM System Resource Controller
+at-rtmp 201/tcp #AppleTalk Routing Maintenance
+at-rtmp 201/udp #AppleTalk Routing Maintenance
+at-nbp 202/tcp #AppleTalk Name Binding
+at-nbp 202/udp #AppleTalk Name Binding
+at-3 203/tcp #AppleTalk Unused
+at-3 203/udp #AppleTalk Unused
+at-echo 204/tcp #AppleTalk Echo
+at-echo 204/udp #AppleTalk Echo
+at-5 205/tcp #AppleTalk Unused
+at-5 205/udp #AppleTalk Unused
+at-zis 206/tcp #AppleTalk Zone Information
+at-zis 206/udp #AppleTalk Zone Information
+at-7 207/tcp #AppleTalk Unused
+at-7 207/udp #AppleTalk Unused
+at-8 208/tcp #AppleTalk Unused
+at-8 208/udp #AppleTalk Unused
+qmtp 209/tcp #The Quick Mail Transfer Protocol
+qmtp 209/udp #The Quick Mail Transfer Protocol
+#PROBLEMS!==============================================================
+#tam 209/tcp #Trivial Authenticated Mail Protocol
+#tam 209/udp #Trivial Authenticated Mail Protocol
+#PROBLEMS!==============================================================
+z39.50 210/tcp wais #ANSI Z39.50
+z39.50 210/udp wais #ANSI Z39.50
+914c/g 211/tcp #Texas Instruments 914C/G Terminal
+914c/g 211/udp #Texas Instruments 914C/G Terminal
+anet 212/tcp #ATEXSSTR
+anet 212/udp #ATEXSSTR
+ipx 213/tcp
+ipx 213/udp
+vmpwscs 214/tcp
+vmpwscs 214/udp
+softpc 215/tcp #Insignia Solutions
+softpc 215/udp #Insignia Solutions
+CAIlic 216/tcp atls #Computer Associates Int'l License Server
+CAIlic 216/udp atls #Computer Associates Int'l License Server
+dbase 217/tcp #dBASE Unix
+dbase 217/udp #dBASE Unix
+mpp 218/tcp #Netix Message Posting Protocol
+mpp 218/udp #Netix Message Posting Protocol
+uarps 219/tcp #Unisys ARPs
+uarps 219/udp #Unisys ARPs
+#imap3@220 was never used and never should have been allocated. See PR 46294.
+#imap3 220/tcp #Interactive Mail Access Protocol v3
+#imap3 220/udp #Interactive Mail Access Protocol v3
+fln-spx 221/tcp #Berkeley rlogind with SPX auth
+fln-spx 221/udp #Berkeley rlogind with SPX auth
+rsh-spx 222/tcp #Berkeley rshd with SPX auth
+rsh-spx 222/udp #Berkeley rshd with SPX auth
+cdc 223/tcp #Certificate Distribution Center
+cdc 223/udp #Certificate Distribution Center
+direct 242/tcp
+direct 242/udp
+sur-meas 243/tcp #Survey Measurement
+sur-meas 243/udp #Survey Measurement
+dayna 244/tcp
+dayna 244/udp
+link 245/tcp
+link 245/udp
+dsp3270 246/tcp #Display Systems Protocol
+dsp3270 246/udp #Display Systems Protocol
+subntbcst_tftp 247/tcp #subntbcst_tftp
+subntbcst_tftp 247/udp #subntbcst_tftp
+bhfhs 248/tcp
+bhfhs 248/udp
+# 249-255 reserved
+rap 256/tcp
+rap 256/udp
+set 257/tcp #secure electronic transaction
+set 257/udp #secure electronic transaction
+yak-chat 258/tcp #yak winsock personal chat
+yak-chat 258/udp #yak winsock personal chat
+esro-gen 259/tcp #efficient short remote operations
+esro-gen 259/udp #efficient short remote operations
+openport 260/tcp
+openport 260/udp
+nsiiops 261/tcp #iiop name service over tls/ssl
+nsiiops 261/udp #iiop name service over tls/ssl
+arcisdms 262/tcp
+arcisdms 262/udp
+hdap 263/tcp
+hdap 263/udp
+bgmp 264/tcp
+bgmp 264/udp
+# 265-279 unassigned
+http-mgmt 280/tcp
+http-mgmt 280/udp
+personal-link 281/tcp
+personal-link 281/udp
+cableport-ax 282/tcp #cable port a/x
+cableport-ax 282/udp #cable port a/x
+# 283-307 unassigned
+novastorbakcup 308/tcp #novastor backup
+novastorbakcup 308/udp #novastor backup
+entrusttime 309/tcp
+entrusttime 309/udp
+bhmds 310/tcp
+bhmds 310/udp
+asip-webadmin 311/tcp #appleshare ip webadmin
+asip-webadmin 311/udp #appleshare ip webadmin
+vslmp 312/tcp
+vslmp 312/udp
+magenta-logic 313/tcp
+magenta-logic 313/udp
+opalis-robot 314/tcp
+opalis-robot 314/udp
+dpsi 315/tcp
+dpsi 315/udp
+decauth 316/tcp
+decauth 316/udp
+zannet 317/tcp
+zannet 317/udp
+# 318-320 #unassigned
+pip 321/tcp
+pip 321/udp
+# 322-343 #unassigned
+pdap 344/tcp #Prospero Data Access Protocol
+pdap 344/udp #Prospero Data Access Protocol
+pawserv 345/tcp #Perf Analysis Workbench
+pawserv 345/udp #Perf Analysis Workbench
+zserv 346/tcp #Zebra server
+zserv 346/udp #Zebra server
+fatserv 347/tcp #Fatmen Server
+fatserv 347/udp #Fatmen Server
+csi-sgwp 348/tcp #Cabletron Management Protocol
+csi-sgwp 348/udp #Cabletron Management Protocol
+mftp 349/tcp
+mftp 349/udp
+matip-type-a 350/tcp #MATIP Type A
+matip-type-a 350/udp
+matip-type-b 351/tcp #MATIP Type B
+matip-type-b 351/udp
+bhoetty 351/tcp #unassigned but widespread use
+bhoetty 351/udp #unassigned but widespread use
+dtag-ste-sb 352/tcp #DTAG
+dtag-ste-sb 352/udp #DTAG
+bhoedap4 352/tcp #unassigned but widespread use
+bhoedap4 352/udp #unassigned but widespread use
+ndsauth 353/tcp
+ndsauth 353/udp
+bh611 354/tcp
+bh611 354/udp
+datex-asn 355/tcp
+datex-asn 355/udp
+cloanto-net-1 356/tcp #Cloanto Net 1
+cloanto-net-1 356/udp
+bhevent 357/tcp
+bhevent 357/udp
+shrinkwrap 358/tcp
+shrinkwrap 358/udp
+tenebris_nts 359/tcp #Tenebris Network Trace Service
+tenebris_nts 359/udp #Tenebris Network Trace Service
+scoi2odialog 360/tcp
+scoi2odialog 360/udp
+semantix 361/tcp
+semantix 361/udp
+srssend 362/tcp #SRS Send
+srssend 362/udp #SRS Send
+rsvp_tunnel 363/tcp
+rsvp_tunnel 363/udp
+aurora-cmgr 364/tcp
+aurora-cmgr 364/udp
+dtk 365/tcp #Deception Tool Kit - Fred Cohen <fc@all.net>
+dtk 365/udp #Deception Tool Kit - Fred Cohen <fc@all.net>
+odmr 366/tcp
+odmr 366/udp
+mortgageware 367/tcp
+mortgageware 367/udp
+qbikgdp 368/tcp #QbikGDP
+qbikgdp 368/udp
+rpc2portmap 369/tcp
+rpc2portmap 369/udp
+codaauth2 370/tcp
+codaauth2 370/udp
+clearcase 371/tcp
+clearcase 371/udp
+ulistserv 372/tcp ulistproc #Unix Listserv
+ulistserv 372/udp ulistproc #Unix Listserv
+legent-1 373/tcp #Legent Corporation (now Computer Associates Intl.)
+legent-1 373/udp #Legent Corporation (now Computer Associates Intl.)
+legent-2 374/tcp #Legent Corporation (now Computer Associates Intl.)
+legent-2 374/udp #Legent Corporation (now Computer Associates Intl.)
+hassle 375/tcp
+hassle 375/udp
+nip 376/tcp #Amiga Envoy Network Inquiry Proto
+nip 376/udp #Amiga Envoy Network Inquiry Proto
+tnETOS 377/tcp #NEC Corporation
+tnETOS 377/udp #NEC Corporation
+dsETOS 378/tcp #NEC Corporation
+dsETOS 378/udp #NEC Corporation
+is99c 379/tcp #TIA/EIA/IS-99 modem client
+is99c 379/udp #TIA/EIA/IS-99 modem client
+is99s 380/tcp #TIA/EIA/IS-99 modem server
+is99s 380/udp #TIA/EIA/IS-99 modem server
+hp-collector 381/tcp #hp performance data collector
+hp-collector 381/udp #hp performance data collector
+hp-managed-node 382/tcp #hp performance data managed node
+hp-managed-node 382/udp #hp performance data managed node
+hp-alarm-mgr 383/tcp #hp performance data alarm manager
+hp-alarm-mgr 383/udp #hp performance data alarm manager
+arns 384/tcp #A Remote Network Server System
+arns 384/udp #A Remote Network Server System
+ibm-app 385/tcp #IBM Application
+ibm-app 385/udp #IBM Application
+asa 386/tcp #ASA Message Router Object Def.
+asa 386/udp #ASA Message Router Object Def.
+aurp 387/tcp #Appletalk Update-Based Routing Pro.
+aurp 387/udp #Appletalk Update-Based Routing Pro.
+unidata-ldm 388/tcp #Unidata LDM Version 4
+unidata-ldm 388/udp #Unidata LDM Version 4
+ldap 389/tcp #Lightweight Directory Access Protocol
+ldap 389/udp #Lightweight Directory Access Protocol
+uis 390/tcp
+uis 390/udp
+synotics-relay 391/tcp #SynOptics SNMP Relay Port
+synotics-relay 391/udp #SynOptics SNMP Relay Port
+synotics-broker 392/tcp #SynOptics Port Broker Port
+synotics-broker 392/udp #SynOptics Port Broker Port
+dis 393/tcp #Data Interpretation System
+dis 393/udp #Data Interpretation System
+embl-ndt 394/tcp #EMBL Nucleic Data Transfer
+embl-ndt 394/udp #EMBL Nucleic Data Transfer
+netcp 395/tcp #NETscout Control Protocol
+netcp 395/udp #NETscout Control Protocol
+netware-ip 396/tcp #Novell Netware over IP
+netware-ip 396/udp #Novell Netware over IP
+mptn 397/tcp #Multi Protocol Trans. Net.
+mptn 397/udp #Multi Protocol Trans. Net.
+kryptolan 398/tcp
+kryptolan 398/udp
+iso-tsap-c2 399/tcp #ISO-TSAP Class 2
+iso-tsap-c2 399/udp #ISO-TSAP Class 2
+work-sol 400/tcp #Workstation Solutions
+work-sol 400/udp #Workstation Solutions
+ups 401/tcp #Uninterruptible Power Supply
+ups 401/udp #Uninterruptible Power Supply
+genie 402/tcp #Genie Protocol
+genie 402/udp #Genie Protocol
+decap 403/tcp
+decap 403/udp
+nced 404/tcp
+nced 404/udp
+ncld 405/tcp
+ncld 405/udp
+imsp 406/tcp #Interactive Mail Support Protocol
+imsp 406/udp #Interactive Mail Support Protocol
+timbuktu 407/tcp
+timbuktu 407/udp
+prm-sm 408/tcp #Prospero Resource Manager Sys. Man.
+prm-sm 408/udp #Prospero Resource Manager Sys. Man.
+prm-nm 409/tcp #Prospero Resource Manager Node Man.
+prm-nm 409/udp #Prospero Resource Manager Node Man.
+decladebug 410/tcp #DECLadebug Remote Debug Protocol
+decladebug 410/udp #DECLadebug Remote Debug Protocol
+rmt 411/tcp #Remote MT Protocol
+rmt 411/udp #Remote MT Protocol
+synoptics-trap 412/tcp #Trap Convention Port
+synoptics-trap 412/udp #Trap Convention Port
+smsp 413/tcp
+smsp 413/udp
+infoseek 414/tcp
+infoseek 414/udp
+bnet 415/tcp
+bnet 415/udp
+silverplatter 416/tcp
+silverplatter 416/udp
+onmux 417/tcp
+onmux 417/udp
+hyper-g 418/tcp
+hyper-g 418/udp
+ariel1 419/tcp
+ariel1 419/udp
+smpte 420/tcp
+smpte 420/udp
+ariel2 421/tcp
+ariel2 421/udp
+ariel3 422/tcp
+ariel3 422/udp
+opc-job-start 423/tcp #IBM Operations Planning and Control Start
+opc-job-start 423/udp #IBM Operations Planning and Control Start
+opc-job-track 424/tcp #IBM Operations Planning and Control Track
+opc-job-track 424/udp #IBM Operations Planning and Control Track
+icad-el 425/tcp
+icad-el 425/udp
+smartsdp 426/tcp
+smartsdp 426/udp
+svrloc 427/tcp #Server Location
+svrloc 427/udp #Server Location
+ocs_cmu 428/tcp
+ocs_cmu 428/udp
+ocs_amu 429/tcp
+ocs_amu 429/udp
+utmpsd 430/tcp
+utmpsd 430/udp
+utmpcd 431/tcp
+utmpcd 431/udp
+iasd 432/tcp
+iasd 432/udp
+nnsp 433/tcp
+nnsp 433/udp
+mobileip-agent 434/tcp
+mobileip-agent 434/udp
+mobilip-mn 435/tcp
+mobilip-mn 435/udp
+dna-cml 436/tcp
+dna-cml 436/udp
+comscm 437/tcp
+comscm 437/udp
+dsfgw 438/tcp
+dsfgw 438/udp
+dasp 439/tcp
+dasp 439/udp
+sgcp 440/tcp
+sgcp 440/udp
+decvms-sysmgt 441/tcp
+decvms-sysmgt 441/udp
+cvc_hostd 442/tcp
+cvc_hostd 442/udp
+https 443/tcp
+https 443/udp
+snpp 444/tcp #Simple Network Paging Protocol
+snpp 444/udp #Simple Network Paging Protocol
+# [RFC1568]
+microsoft-ds 445/tcp
+microsoft-ds 445/udp
+ddm-rdb 446/tcp
+ddm-rdb 446/udp
+ddm-dfm 447/tcp
+ddm-dfm 447/udp
+ddm-ssl 448/tcp ddm-byte
+ddm-ssl 448/udp ddm-byte
+as-servermap 449/tcp #AS Server Mapper
+as-servermap 449/udp #AS Server Mapper
+tserver 450/tcp
+tserver 450/udp
+sfs-smp-net 451/tcp #Cray Network Semaphore server
+sfs-smp-net 451/udp #Cray Network Semaphore server
+sfs-config 452/tcp #Cray SFS config server
+sfs-config 452/udp #Cray SFS config server
+creativeserver 453/tcp #CreativeServer
+creativeserver 453/udp #CreativeServer
+contentserver 454/tcp #ContentServer
+contentserver 454/udp #ContentServer
+creativepartnr 455/tcp #CreativePartnr
+creativepartnr 455/udp #CreativePartnr
+macon-tcp 456/tcp
+macon-udp 456/udp
+scohelp 457/tcp
+scohelp 457/udp
+appleqtc 458/tcp #apple quick time
+appleqtc 458/udp #apple quick time
+ampr-rcmd 459/tcp
+ampr-rcmd 459/udp
+skronk 460/tcp
+skronk 460/udp
+datasurfsrv 461/tcp
+datasurfsrv 461/udp
+datasurfsrvsec 462/tcp
+datasurfsrvsec 462/udp
+alpes 463/tcp
+alpes 463/udp
+#
+kpasswd5 464/tcp # Kerberos (v5)
+kpasswd5 464/udp # Kerberos (v5)
+#PROBLEMS!==============================================================
+# IANA has offically assigned these two ports as ``kpasswd''
+#kpasswd 464/tcp # Kerberos (v5)
+#kpasswd 464/udp # Kerberos (v5)
+#PROBLEMS!==============================================================
+smtps 465/tcp #smtp protocol over TLS/SSL (was ssmtp)
+smtps 465/udp #smtp protocol over TLS/SSL (was ssmtp)
+digital-vrc 466/tcp
+digital-vrc 466/udp
+mylex-mapd 467/tcp
+mylex-mapd 467/udp
+photuris 468/tcp
+photuris 468/udp
+rcp 469/tcp #Radio Control Protocol
+rcp 469/udp #Radio Control Protocol
+scx-proxy 470/tcp
+scx-proxy 470/udp
+mondex 471/tcp
+mondex 471/udp
+ljk-login 472/tcp
+ljk-login 472/udp
+hybrid-pop 473/tcp
+hybrid-pop 473/udp
+tn-tl-w1 474/tcp
+tn-tl-w2 474/udp
+tcpnethaspsrv 475/tcp
+tcpnethaspsrv 475/udp
+tn-tl-fd1 476/tcp
+tn-tl-fd1 476/udp
+ss7ns 477/tcp
+ss7ns 477/udp
+spsc 478/tcp
+spsc 478/udp
+iafserver 479/tcp
+iafserver 479/udp
+iafdbase 480/tcp
+iafdbase 480/udp
+ph 481/tcp
+ph 481/udp
+bgs-nsi 482/tcp
+bgs-nsi 482/udp
+ulpnet 483/tcp
+ulpnet 483/udp
+integra-sme 484/tcp #Integra Software Management Environment
+integra-sme 484/udp #Integra Software Management Environment
+powerburst 485/tcp #Air Soft Power Burst
+powerburst 485/udp #Air Soft Power Burst
+avian 486/tcp
+avian 486/udp
+saft 487/tcp #saft Simple Asynchronous File Transfer
+saft 487/udp #saft Simple Asynchronous File Transfer
+gss-http 488/tcp
+gss-http 488/udp
+nest-protocol 489/tcp
+nest-protocol 489/udp
+micom-pfs 490/tcp
+micom-pfs 490/udp
+go-login 491/tcp
+go-login 491/udp
+ticf-1 492/tcp #Transport Independent Convergence for FNA
+ticf-1 492/udp #Transport Independent Convergence for FNA
+ticf-2 493/tcp #Transport Independent Convergence for FNA
+ticf-2 493/udp #Transport Independent Convergence for FNA
+pov-ray 494/tcp
+pov-ray 494/udp
+intecourier 495/tcp
+intecourier 495/udp
+pim-rp-disc 496/tcp
+pim-rp-disc 496/udp
+dantz 497/tcp
+dantz 497/udp
+siam 498/tcp
+siam 498/udp
+iso-ill 499/tcp #ISO ILL Protocol
+iso-ill 499/udp #ISO ILL Protocol
+isakmp 500/tcp
+isakmp 500/udp
+stmf 501/tcp
+stmf 501/udp
+asa-appl-proto 502/tcp
+asa-appl-proto 502/udp
+intrinsa 503/tcp
+intrinsa 503/udp
+citadel 504/tcp
+citadel 504/udp
+mailbox-lm 505/tcp
+mailbox-lm 505/udp
+ohimsrv 506/tcp
+ohimsrv 506/udp
+crs 507/tcp
+crs 507/udp
+xvttp 508/tcp
+xvttp 508/udp
+snare 509/tcp
+snare 509/udp
+fcp 510/tcp #FirstClass Protocol
+fcp 510/udp #FirstClass Protocol
+passgo 511/tcp
+passgo 511/udp
+#
+# Berkeley-specific services
+#
+exec 512/tcp #remote process execution;
+# authentication performed using
+# passwords and UNIX login names
+biff 512/udp comsat #used by mail system to notify users
+# of new mail received; currently
+# receives messages only from
+# processes on the same machine
+login 513/tcp #remote login a la telnet;
+# automatic authentication performed
+# based on priviledged port numbers
+# and distributed data bases which
+# identify "authentication domains"
+who 513/udp whod #maintains data bases showing who's
+# logged in to machines on a local
+# net and the load average of the
+# machine
+shell 514/tcp cmd #like exec, but automatic
+# authentication is performed as for
+# login server
+syslog 514/udp
+printer 515/tcp spooler
+printer 515/udp spooler
+videotex 516/tcp
+videotex 516/udp
+talk 517/tcp #like tenex link, but across
+# machine - unfortunately, doesn't
+# use link protocol (this is actually
+# just a rendezvous port from which a
+# tcp connection is established)
+talk 517/udp #like tenex link, but across
+# machine - unfortunately, doesn't
+# use link protocol (this is actually
+# just a rendezvous port from which a
+# tcp connection is established)
+ntalk 518/tcp
+ntalk 518/udp
+utime 519/tcp unixtime
+utime 519/udp unixtime
+efs 520/tcp #extended file name server
+router 520/udp route routed #local routing process (on site);
+# uses variant of Xerox NS routing
+# information protocol
+ripng 521/tcp
+ripng 521/udp
+ulp 522/tcp
+ulp 522/udp
+ibm-db2 523/tcp
+ibm-db2 523/udp
+ncp 524/tcp
+ncp 524/udp
+timed 525/tcp timeserver
+timed 525/udp timeserver
+tempo 526/tcp newdate
+tempo 526/udp newdate
+stx 527/tcp #Stock IXChange
+stx 527/udp #Stock IXChange
+custix 528/tcp #Customer IXChange
+custix 528/udp #Customer IXChange
+irc-serv 529/tcp
+irc-serv 529/udp
+courier 530/tcp rpc
+courier 530/udp rpc
+conference 531/tcp chat
+conference 531/udp chat
+netnews 532/tcp readnews
+netnews 532/udp readnews
+netwall 533/tcp #for emergency broadcasts
+netwall 533/udp #for emergency broadcasts
+mm-admin 534/tcp #MegaMedia Admin
+mm-admin 534/udp #MegaMedia Admin
+iiop 535/tcp
+iiop 535/udp
+opalis-rdv 536/tcp
+opalis-rdv 536/udp
+nmsp 537/tcp #Networked Media Streaming Protocol
+nmsp 537/udp #Networked Media Streaming Protocol
+gdomap 538/tcp
+gdomap 538/udp
+apertus-ldp 539/tcp #Apertus Technologies Load Determination
+apertus-ldp 539/udp #Apertus Technologies Load Determination
+uucp 540/tcp uucpd
+uucp 540/udp uucpd
+uucp-rlogin 541/tcp
+uucp-rlogin 541/udp
+commerce 542/tcp
+commerce 542/udp
+klogin 543/tcp # Kerberos (v4/v5)
+klogin 543/udp # Kerberos (v4/v5)
+kshell 544/tcp krcmd # Kerberos (v4/v5)
+kshell 544/udp krcmd # Kerberos (v4/v5)
+appleqtcsrvr 545/tcp
+appleqtcsrvr 545/udp
+dhcpv6-client 546/tcp #DHCPv6 Client
+dhcpv6-client 546/udp #DHCPv6 Client
+dhcpv6-server 547/tcp #DHCPv6 Server
+dhcpv6-server 547/udp #DHCPv6 Server
+afpovertcp 548/tcp #AFP over TCP
+afpovertcp 548/udp #AFP over TCP
+idfp 549/tcp
+idfp 549/udp
+new-rwho 550/tcp new-who
+new-rwho 550/udp new-who
+cybercash 551/tcp
+cybercash 551/udp
+deviceshare 552/tcp
+deviceshare 552/udp
+pirp 553/tcp
+pirp 553/udp
+rtsp 554/tcp #Real Time Stream Control Protocol
+rtsp 554/udp #Real Time Stream Control Protocol
+dsf 555/tcp
+dsf 555/udp
+remotefs 556/tcp rfs rfs_server # Brunhoff remote filesystem
+remotefs 556/udp rfs rfs_server # Brunhoff remote filesystem
+openvms-sysipc 557/tcp
+openvms-sysipc 557/udp
+sdnskmp 558/tcp
+sdnskmp 558/udp
+teedtap 559/tcp
+teedtap 559/udp
+rmonitor 560/tcp rmonitord
+rmonitor 560/udp rmonitord
+monitor 561/tcp
+monitor 561/udp
+chshell 562/tcp chcmd
+chshell 562/udp chcmd
+nntps 563/tcp snntp #nntp protocol over TLS/SSL
+nntps 563/udp snntp #nntp protocol over TLS/SSL
+9pfs 564/tcp #plan 9 file service
+9pfs 564/udp #plan 9 file service
+whoami 565/tcp
+whoami 565/udp
+streettalk 566/tcp
+banyan-rpc 567/tcp
+banyan-rpc 567/udp
+ms-shuttle 568/tcp #Microsoft shuttle
+ms-shuttle 568/udp #Microsoft shuttle
+ms-rome 569/tcp #Microsoft rome
+ms-rome 569/udp #Microsoft rome
+meter 570/tcp #demon
+meter 570/udp #demon
+umeter 571/tcp #udemon
+umeter 571/udp #udemon
+sonar 572/tcp
+sonar 572/udp
+banyan-vip 573/tcp
+banyan-vip 573/udp
+ftp-agent 574/tcp #FTP Software Agent System
+ftp-agent 574/udp #FTP Software Agent System
+vemmi 575/tcp
+vemmi 575/udp
+ipcd 576/tcp
+ipcd 576/udp
+vnas 577/tcp
+vnas 577/udp
+ipdd 578/tcp
+ipdd 578/udp
+decbsrv 579/tcp
+decbsrv 579/udp
+sntp-heartbeat 580/tcp
+sntp-heartbeat 580/udp
+bdp 581/tcp #Bundle Discovery Protocol
+bdp 581/udp #Bundle Discovery Protocol
+scc-security 582/tcp
+scc-security 582/udp
+philips-vc 583/tcp #Philips Video-Conferencing
+philips-vc 583/udp #Philips Video-Conferencing
+keyserver 584/tcp
+keyserver 584/udp
+#imap4-ssl@585 never should have been allocated. See PR 46294.
+#imap4-ssl 585/tcp #IMAP4+SSL (use of 585 is not recommended,
+#imap4-ssl 585/udp # use 993 instead)
+password-chg 586/tcp
+password-chg 586/udp
+submission 587/tcp
+submission 587/udp
+cal 588/tcp
+cal 588/udp
+eyelink 589/tcp
+eyelink 589/udp
+tns-cml 590/tcp
+tns-cml 590/udp
+http-alt 591/tcp #FileMaker, Inc. - HTTP Alternate (see Port 80)
+http-alt 591/udp #FileMaker, Inc. - HTTP Alternate (see Port 80)
+eudora-set 592/tcp
+eudora-set 592/udp
+http-rpc-epmap 593/tcp #HTTP RPC Ep Map
+http-rpc-epmap 593/udp #HTTP RPC Ep Map
+tpip 594/tcp
+tpip 594/udp
+cab-protocol 595/tcp
+cab-protocol 595/udp
+smsd 596/tcp
+smsd 596/udp
+ptcnameservice 597/tcp #PTC Name Service
+ptcnameservice 597/udp #PTC Name Service
+sco-websrvrmg3 598/tcp #SCO Web Server Manager 3
+sco-websrvrmg3 598/udp #SCO Web Server Manager 3
+acp 599/tcp #Aeolon Core Protocol
+acp 599/udp #Aeolon Core Protocol
+ipcserver 600/tcp #Sun IPC server
+ipcserver 600/udp #Sun IPC server
+urm 606/tcp #Cray Unified Resource Manager
+urm 606/udp #Cray Unified Resource Manager
+nqs 607/tcp
+nqs 607/udp
+sift-uft 608/tcp #Sender-Initiated/Unsolicited File Transfer
+sift-uft 608/udp #Sender-Initiated/Unsolicited File Transfer
+npmp-trap 609/tcp
+npmp-trap 609/udp
+npmp-local 610/tcp
+npmp-local 610/udp
+npmp-gui 611/tcp
+npmp-gui 611/udp
+sshell 614/tcp #SSLshell
+sshell 614/udp
+ipp 631/tcp #IPP (Internet Printing Protocol)
+ipp 631/udp #IPP (Internet Printing Protocol)
+ginad 634/tcp
+ginad 634/udp
+ldaps 636/tcp sldap #ldap protocol over TLS/SSL
+ldaps 636/udp sldap
+aodv 654/tcp #Ad-Hoc On-Demand Distance Vector Routing Protocol
+aodv 654/udp #Ad-Hoc On-Demand Distance Vector Routing Protocol
+mdqs 666/tcp
+mdqs 666/udp
+#PROBLEMS!===============================================
+doom 666/tcp #doom Id Software
+doom 666/udp #doom Id Software
+#PROBLEMS!===============================================
+acap 674/tcp #Application Configuration Access Protocol
+acap 674/udp #Application Configuration Access Protocol
+elcsd 704/tcp #errlog copy/server daemon
+elcsd 704/udp #errlog copy/server daemon
+entrustmanager 709/tcp #EntrustManager
+entrustmanager 709/udp #EntrustManager
+netviewdm1 729/tcp #IBM NetView DM/6000 Server/Client
+netviewdm1 729/udp #IBM NetView DM/6000 Server/Client
+netviewdm2 730/tcp #IBM NetView DM/6000 send/tcp
+netviewdm2 730/udp #IBM NetView DM/6000 send/tcp
+netviewdm3 731/tcp #IBM NetView DM/6000 receive/tcp
+netviewdm3 731/udp #IBM NetView DM/6000 receive/tcp
+netgw 741/tcp
+netgw 741/udp
+netrcs 742/tcp #Network based Rev. Cont. Sys.
+netrcs 742/udp #Network based Rev. Cont. Sys.
+flexlm 744/tcp #Flexible License Manager
+flexlm 744/udp #Flexible License Manager
+fujitsu-dev 747/tcp #Fujitsu Device Control
+fujitsu-dev 747/udp #Fujitsu Device Control
+ris-cm 748/tcp #Russell Info Sci Calendar Manager
+ris-cm 748/udp #Russell Info Sci Calendar Manager
+kerberos-adm 749/tcp #Kerberos administration (v5)
+kerberos-adm 749/udp #Kerberos administration (v5)
+kerberos-iv 750/udp kdc # Kerberos (v4)
+kerberos-iv 750/tcp kdc # Kerberos (v4)
+#PROBLEMS!========================================================
+#rfile 750/tcp
+#loadav 750/udp
+#PROBLEMS!========================================================
+kerberos_master 751/tcp # Kerberos `kadmin' (v4)
+kerberos_master 751/udp # Kerberos `kadmin' (v4)
+#PROBLEMS!========================================================
+pump 751/tcp
+pump 751/udp
+#PROBLEMS!========================================================
+qrh 752/tcp
+qrh 752/udp
+rrh 753/tcp
+rrh 753/udp
+krb_prop 754/tcp krb5_prop # kerberos/v5 server propagation
+#PROBLEMS!========================================================
+tell 754/tcp #send
+#PROBLEMS!========================================================
+tell 754/udp #send
+nlogin 758/tcp
+nlogin 758/udp
+con 759/tcp
+con 759/udp
+krbupdate 760/tcp kreg # Kerberos (v4) registration
+#PROBLEMS!========================================================
+ns 760/tcp
+#PROBLEMS!========================================================
+ns 760/udp
+kpasswd 761/tcp kpwd # Kerberos (v4) "passwd"
+#PROBLEMS!========================================================
+rxe 761/tcp
+#PROBLEMS!========================================================
+rxe 761/udp
+quotad 762/tcp
+quotad 762/udp
+cycleserv 763/tcp
+cycleserv 763/udp
+omserv 764/tcp
+omserv 764/udp
+webster 765/tcp
+webster 765/udp
+phonebook 767/tcp #phone
+phonebook 767/udp #phone
+vid 769/tcp
+vid 769/udp
+cadlock 770/tcp
+cadlock 770/udp
+rtip 771/tcp
+rtip 771/udp
+cycleserv2 772/tcp
+cycleserv2 772/udp
+submit 773/tcp
+notify 773/udp
+rpasswd 774/tcp
+acmaint_dbd 774/udp
+entomb 775/tcp
+acmaint_transd 775/udp
+wpages 776/tcp
+wpages 776/udp
+wpgs 780/tcp
+wpgs 780/udp
+concert 786/tcp
+concert 786/udp
+mdbs_daemon 800/tcp
+mdbs_daemon 800/udp
+device 801/tcp
+device 801/udp
+supfilesrv 871/tcp # for SUP
+rsync 873/tcp
+rsync 873/udp
+accessbuilder 888/tcp
+accessbuilder 888/udp
+swat 901/tcp # samba web configuration tool
+rndc 953/tcp # named's rndc control socket
+ftps-data 989/tcp # ftp protocol, data, over TLS/SSL
+ftps-data 989/udp
+ftps 990/tcp # ftp protocol, control, over TLS/SSL
+ftps 990/udp
+telnets 992/tcp # telnet protocol over TLS/SSL
+telnets 992/udp
+imaps 993/tcp # imap4 protocol over TLS/SSL
+imaps 993/udp
+ircs 994/tcp # irc protocol over TLS/SSL
+ircs 994/udp
+pop3s 995/tcp spop3 # pop3 protocol over TLS/SSL
+pop3s 995/udp spop3
+vsinet 996/tcp
+vsinet 996/udp
+maitrd 997/tcp
+maitrd 997/udp
+busboy 998/tcp
+puparp 998/udp
+garcon 999/tcp
+applix 999/udp #Applix ac
+puprouter 999/tcp
+puprouter 999/udp
+cadlock2 1000/tcp
+cadlock2 1000/udp
+#
+# REGISTERED PORT NUMBERS
+#
+blackjack 1025/tcp #network blackjack
+blackjack 1025/udp #network blackjack
+iad1 1030/tcp #BBN IAD
+iad1 1030/udp #BBN IAD
+iad2 1031/tcp #BBN IAD
+iad2 1031/udp #BBN IAD
+iad3 1032/tcp #BBN IAD
+iad3 1032/udp #BBN IAD
+nim 1058/tcp
+nim 1058/udp
+nimreg 1059/tcp
+nimreg 1059/udp
+instl_boots 1067/tcp #Installation Bootstrap Proto. Serv.
+instl_boots 1067/udp #Installation Bootstrap Proto. Serv.
+instl_bootc 1068/tcp #Installation Bootstrap Proto. Cli.
+instl_bootc 1068/udp #Installation Bootstrap Proto. Cli.
+socks 1080/tcp
+socks 1080/udp
+ansoft-lm-1 1083/tcp #Anasoft License Manager
+ansoft-lm-1 1083/udp #Anasoft License Manager
+ansoft-lm-2 1084/tcp #Anasoft License Manager
+ansoft-lm-2 1084/udp #Anasoft License Manager
+webobjects 1085/tcp #Web Objects
+webobjects 1085/udp #Web Objects
+kpop 1109/tcp #Unofficial
+kpop 1109/udp #Unofficial
+nfsd-status 1110/tcp #Cluster status info
+nfsd-keepalive 1110/udp #Client status info
+supfiledbg 1127/tcp # for SUP
+nfa 1155/tcp #Network File Access
+nfa 1155/udp #Network File Access
+phone 1167/udp #conference calling
+skkserv 1178/tcp #SKK (kanji input)
+lupa 1212/tcp
+lupa 1212/udp
+nerv 1222/tcp #SNI R&D network
+nerv 1222/udp #SNI R&D network
+hermes 1248/tcp
+hermes 1248/udp
+healthd 1281/tcp #healthd
+healthd 1281/udp #healthd
+alta-ana-lm 1346/tcp #Alta Analytics License Manager
+alta-ana-lm 1346/udp #Alta Analytics License Manager
+bbn-mmc 1347/tcp #multi media conferencing
+bbn-mmc 1347/udp #multi media conferencing
+bbn-mmx 1348/tcp #multi media conferencing
+bbn-mmx 1348/udp #multi media conferencing
+sbook 1349/tcp #Registration Network Protocol
+sbook 1349/udp #Registration Network Protocol
+editbench 1350/tcp #Registration Network Protocol
+editbench 1350/udp #Registration Network Protocol
+equationbuilder 1351/tcp #Digital Tool Works (MIT)
+equationbuilder 1351/udp #Digital Tool Works (MIT)
+lotusnote 1352/tcp #Lotus Note
+lotusnote 1352/udp #Lotus Note
+relief 1353/tcp #Relief Consulting
+relief 1353/udp #Relief Consulting
+rightbrain 1354/tcp #RightBrain Software
+rightbrain 1354/udp #RightBrain Software
+intuitive-edge 1355/tcp #Intuitive Edge
+intuitive-edge 1355/udp #Intuitive Edge
+cuillamartin 1356/tcp #CuillaMartin Company
+cuillamartin 1356/udp #CuillaMartin Company
+pegboard 1357/tcp #Electronic PegBoard
+pegboard 1357/udp #Electronic PegBoard
+connlcli 1358/tcp
+connlcli 1358/udp
+ftsrv 1359/tcp
+ftsrv 1359/udp
+mimer 1360/tcp
+mimer 1360/udp
+linx 1361/tcp
+linx 1361/udp
+timeflies 1362/tcp
+timeflies 1362/udp
+ndm-requester 1363/tcp #Network DataMover Requester
+ndm-requester 1363/udp #Network DataMover Requester
+ndm-server 1364/tcp #Network DataMover Server
+ndm-server 1364/udp #Network DataMover Server
+adapt-sna 1365/tcp #Network Software Associates
+adapt-sna 1365/udp #Network Software Associates
+netware-csp 1366/tcp #Novell NetWare Comm Service Platform
+netware-csp 1366/udp #Novell NetWare Comm Service Platform
+dcs 1367/tcp
+dcs 1367/udp
+screencast 1368/tcp
+screencast 1368/udp
+gv-us 1369/tcp #GlobalView to Unix Shell
+gv-us 1369/udp #GlobalView to Unix Shell
+us-gv 1370/tcp #Unix Shell to GlobalView
+us-gv 1370/udp #Unix Shell to GlobalView
+fc-cli 1371/tcp #Fujitsu Config Protocol
+fc-cli 1371/udp #Fujitsu Config Protocol
+fc-ser 1372/tcp #Fujitsu Config Protocol
+fc-ser 1372/udp #Fujitsu Config Protocol
+chromagrafx 1373/tcp
+chromagrafx 1373/udp
+molly 1374/tcp #EPI Software Systems
+molly 1374/udp #EPI Software Systems
+bytex 1375/tcp
+bytex 1375/udp
+ibm-pps 1376/tcp #IBM Person to Person Software
+ibm-pps 1376/udp #IBM Person to Person Software
+cichlid 1377/tcp #Cichlid License Manager
+cichlid 1377/udp #Cichlid License Manager
+elan 1378/tcp #Elan License Manager
+elan 1378/udp #Elan License Manager
+dbreporter 1379/tcp #Integrity Solutions
+dbreporter 1379/udp #Integrity Solutions
+telesis-licman 1380/tcp #Telesis Network License Manager
+telesis-licman 1380/udp #Telesis Network License Manager
+apple-licman 1381/tcp #Apple Network License Manager
+apple-licman 1381/udp #Apple Network License Manager
+#udt_os 1382/tcp
+#udt_os 1382/udp
+gwha 1383/tcp #GW Hannaway Network License Manager
+gwha 1383/udp #GW Hannaway Network License Manager
+os-licman 1384/tcp #Objective Solutions License Manager
+os-licman 1384/udp #Objective Solutions License Manager
+atex_elmd 1385/tcp #Atex Publishing License Manager
+atex_elmd 1385/udp #Atex Publishing License Manager
+checksum 1386/tcp #CheckSum License Manager
+checksum 1386/udp #CheckSum License Manager
+cadsi-lm 1387/tcp #Computer Aided Design Software Inc LM
+cadsi-lm 1387/udp #Computer Aided Design Software Inc LM
+objective-dbc 1388/tcp #Objective Solutions DataBase Cache
+objective-dbc 1388/udp #Objective Solutions DataBase Cache
+iclpv-dm 1389/tcp #Document Manager
+iclpv-dm 1389/udp #Document Manager
+iclpv-sc 1390/tcp #Storage Controller
+iclpv-sc 1390/udp #Storage Controller
+iclpv-sas 1391/tcp #Storage Access Server
+iclpv-sas 1391/udp #Storage Access Server
+iclpv-pm 1392/tcp #Print Manager
+iclpv-pm 1392/udp #Print Manager
+iclpv-nls 1393/tcp #Network Log Server
+iclpv-nls 1393/udp #Network Log Server
+iclpv-nlc 1394/tcp #Network Log Client
+iclpv-nlc 1394/udp #Network Log Client
+iclpv-wsm 1395/tcp #PC Workstation Manager software
+iclpv-wsm 1395/udp #PC Workstation Manager software
+dvl-activemail 1396/tcp #DVL Active Mail
+dvl-activemail 1396/udp #DVL Active Mail
+audio-activmail 1397/tcp #Audio Active Mail
+audio-activmail 1397/udp #Audio Active Mail
+video-activmail 1398/tcp #Video Active Mail
+video-activmail 1398/udp #Video Active Mail
+cadkey-licman 1399/tcp #Cadkey License Manager
+cadkey-licman 1399/udp #Cadkey License Manager
+cadkey-tablet 1400/tcp #Cadkey Tablet Daemon
+cadkey-tablet 1400/udp #Cadkey Tablet Daemon
+goldleaf-licman 1401/tcp #Goldleaf License Manager
+goldleaf-licman 1401/udp #Goldleaf License Manager
+prm-sm-np 1402/tcp #Prospero Resource Manager
+prm-sm-np 1402/udp #Prospero Resource Manager
+prm-nm-np 1403/tcp #Prospero Resource Manager
+prm-nm-np 1403/udp #Prospero Resource Manager
+igi-lm 1404/tcp #Infinite Graphics License Manager
+igi-lm 1404/udp #Infinite Graphics License Manager
+ibm-res 1405/tcp #IBM Remote Execution Starter
+ibm-res 1405/udp #IBM Remote Execution Starter
+netlabs-lm 1406/tcp #NetLabs License Manager
+netlabs-lm 1406/udp #NetLabs License Manager
+dbsa-lm 1407/tcp #DBSA License Manager
+dbsa-lm 1407/udp #DBSA License Manager
+sophia-lm 1408/tcp #Sophia License Manager
+sophia-lm 1408/udp #Sophia License Manager
+here-lm 1409/tcp #Here License Manager
+here-lm 1409/udp #Here License Manager
+hiq 1410/tcp #HiQ License Manager
+hiq 1410/udp #HiQ License Manager
+af 1411/tcp #AudioFile
+af 1411/udp #AudioFile
+innosys 1412/tcp
+innosys 1412/udp
+innosys-acl 1413/tcp
+innosys-acl 1413/udp
+ibm-mqseries 1414/tcp #IBM MQSeries
+ibm-mqseries 1414/udp #IBM MQSeries
+dbstar 1415/tcp
+dbstar 1415/udp
+novell-lu6.2 1416/tcp #Novell LU6.2
+novell-lu6.2 1416/udp #Novell LU6.2
+timbuktu-srv1 1417/tcp #Timbuktu Service 1 Port
+timbuktu-srv1 1417/udp #Timbuktu Service 1 Port
+timbuktu-srv2 1418/tcp #Timbuktu Service 2 Port
+timbuktu-srv2 1418/udp #Timbuktu Service 2 Port
+timbuktu-srv3 1419/tcp #Timbuktu Service 3 Port
+timbuktu-srv3 1419/udp #Timbuktu Service 3 Port
+timbuktu-srv4 1420/tcp #Timbuktu Service 4 Port
+timbuktu-srv4 1420/udp #Timbuktu Service 4 Port
+gandalf-lm 1421/tcp #Gandalf License Manager
+gandalf-lm 1421/udp #Gandalf License Manager
+autodesk-lm 1422/tcp #Autodesk License Manager
+autodesk-lm 1422/udp #Autodesk License Manager
+essbase 1423/tcp #Essbase Arbor Software
+essbase 1423/udp #Essbase Arbor Software
+hybrid 1424/tcp #Hybrid Encryption Protocol
+hybrid 1424/udp #Hybrid Encryption Protocol
+zion-lm 1425/tcp #Zion Software License Manager
+zion-lm 1425/udp #Zion Software License Manager
+sas-1 1426/tcp #Satellite-data Acquisition System 1
+sas-1 1426/udp #Satellite-data Acquisition System 1
+mloadd 1427/tcp #mloadd monitoring tool
+mloadd 1427/udp #mloadd monitoring tool
+informatik-lm 1428/tcp #Informatik License Manager
+informatik-lm 1428/udp #Informatik License Manager
+nms 1429/tcp #Hypercom NMS
+nms 1429/udp #Hypercom NMS
+tpdu 1430/tcp #Hypercom TPDU
+tpdu 1430/udp #Hypercom TPDU
+rgtp 1431/tcp #Reverse Gossip Transport
+rgtp 1431/udp #Reverse Gossip Transport
+blueberry-lm 1432/tcp #Blueberry Software License Manager
+blueberry-lm 1432/udp #Blueberry Software License Manager
+ms-sql-s 1433/tcp #Microsoft-SQL-Server
+ms-sql-s 1433/udp #Microsoft-SQL-Server
+ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
+ms-sql-m 1434/udp #Microsoft-SQL-Monitor
+ibm-cics 1435/tcp
+ibm-cics 1435/udp
+sas-2 1436/tcp #Satellite-data Acquisition System 2
+sas-2 1436/udp #Satellite-data Acquisition System 2
+tabula 1437/tcp
+tabula 1437/udp
+eicon-server 1438/tcp #Eicon Security Agent/Server
+eicon-server 1438/udp #Eicon Security Agent/Server
+eicon-x25 1439/tcp #Eicon X25/SNA Gateway
+eicon-x25 1439/udp #Eicon X25/SNA Gateway
+eicon-slp 1440/tcp #Eicon Service Location Protocol
+eicon-slp 1440/udp #Eicon Service Location Protocol
+cadis-1 1441/tcp #Cadis License Management
+cadis-1 1441/udp #Cadis License Management
+cadis-2 1442/tcp #Cadis License Management
+cadis-2 1442/udp #Cadis License Management
+ies-lm 1443/tcp #Integrated Engineering Software
+ies-lm 1443/udp #Integrated Engineering Software
+marcam-lm 1444/tcp #Marcam License Management
+marcam-lm 1444/udp #Marcam License Management
+proxima-lm 1445/tcp #Proxima License Manager
+proxima-lm 1445/udp #Proxima License Manager
+ora-lm 1446/tcp #Optical Research Associates License Manager
+ora-lm 1446/udp #Optical Research Associates License Manager
+apri-lm 1447/tcp #Applied Parallel Research LM
+apri-lm 1447/udp #Applied Parallel Research LM
+oc-lm 1448/tcp #OpenConnect License Manager
+oc-lm 1448/udp #OpenConnect License Manager
+peport 1449/tcp
+peport 1449/udp
+dwf 1450/tcp #Tandem Distributed Workbench Facility
+dwf 1450/udp #Tandem Distributed Workbench Facility
+infoman 1451/tcp #IBM Information Management
+infoman 1451/udp #IBM Information Management
+gtegsc-lm 1452/tcp #GTE Government Systems License Man
+gtegsc-lm 1452/udp #GTE Government Systems License Man
+genie-lm 1453/tcp #Genie License Manager
+genie-lm 1453/udp #Genie License Manager
+interhdl_elmd 1454/tcp #interHDL License Manager
+interhdl_elmd 1454/udp #interHDL License Manager
+esl-lm 1455/tcp #ESL License Manager
+esl-lm 1455/udp #ESL License Manager
+dca 1456/tcp
+dca 1456/udp
+valisys-lm 1457/tcp #Valisys License Manager
+valisys-lm 1457/udp #Valisys License Manager
+nrcabq-lm 1458/tcp #Nichols Research Corp.
+nrcabq-lm 1458/udp #Nichols Research Corp.
+proshare1 1459/tcp #Proshare Notebook Application
+proshare1 1459/udp #Proshare Notebook Application
+proshare2 1460/tcp #Proshare Notebook Application
+proshare2 1460/udp #Proshare Notebook Application
+ibm_wrless_lan 1461/tcp #IBM Wireless LAN
+ibm_wrless_lan 1461/udp #IBM Wireless LAN
+world-lm 1462/tcp #World License Manager
+world-lm 1462/udp #World License Manager
+nucleus 1463/tcp
+nucleus 1463/udp
+msl_lmd 1464/tcp #MSL License Manager
+msl_lmd 1464/udp #MSL License Manager
+pipes 1465/tcp #Pipes Platform
+pipes 1465/udp #Pipes Platform mfarlin@peerlogic.com
+oceansoft-lm 1466/tcp #Ocean Software License Manager
+oceansoft-lm 1466/udp #Ocean Software License Manager
+csdmbase 1467/tcp
+csdmbase 1467/udp
+csdm 1468/tcp
+csdm 1468/udp
+aal-lm 1469/tcp #Active Analysis Limited License Manager
+aal-lm 1469/udp #Active Analysis Limited License Manager
+uaiact 1470/tcp #Universal Analytics
+uaiact 1470/udp #Universal Analytics
+csdmbase 1471/tcp
+csdmbase 1471/udp
+csdm 1472/tcp
+csdm 1472/udp
+openmath 1473/tcp
+openmath 1473/udp
+telefinder 1474/tcp
+telefinder 1474/udp
+taligent-lm 1475/tcp #Taligent License Manager
+taligent-lm 1475/udp #Taligent License Manager
+clvm-cfg 1476/tcp
+clvm-cfg 1476/udp
+ms-sna-server 1477/tcp
+ms-sna-server 1477/udp
+ms-sna-base 1478/tcp
+ms-sna-base 1478/udp
+dberegister 1479/tcp
+dberegister 1479/udp
+pacerforum 1480/tcp
+pacerforum 1480/udp
+airs 1481/tcp
+airs 1481/udp
+miteksys-lm 1482/tcp #Miteksys License Manager
+miteksys-lm 1482/udp #Miteksys License Manager
+afs 1483/tcp #AFS License Manager
+afs 1483/udp #AFS License Manager
+confluent 1484/tcp #Confluent License Manager
+confluent 1484/udp #Confluent License Manager
+lansource 1485/tcp
+lansource 1485/udp
+nms_topo_serv 1486/tcp
+nms_topo_serv 1486/udp
+localinfosrvr 1487/tcp
+localinfosrvr 1487/udp
+docstor 1488/tcp
+docstor 1488/udp
+dmdocbroker 1489/tcp
+dmdocbroker 1489/udp
+insitu-conf 1490/tcp
+insitu-conf 1490/udp
+anynetgateway 1491/tcp
+anynetgateway 1491/udp
+stone-design-1 1492/tcp
+stone-design-1 1492/udp
+netmap_lm 1493/tcp
+netmap_lm 1493/udp
+ica 1494/tcp
+ica 1494/udp
+cvc 1495/tcp
+cvc 1495/udp
+liberty-lm 1496/tcp
+liberty-lm 1496/udp
+rfx-lm 1497/tcp
+rfx-lm 1497/udp
+watcom-sql 1498/tcp
+watcom-sql 1498/udp
+fhc 1499/tcp #Federico Heinz Consultora
+fhc 1499/udp #Federico Heinz Consultora
+vlsi-lm 1500/tcp #VLSI License Manager
+vlsi-lm 1500/udp #VLSI License Manager
+sas-3 1501/tcp #Satellite-data Acquisition System 3
+sas-3 1501/udp #Satellite-data Acquisition System 3
+shivadiscovery 1502/tcp #Shiva
+shivadiscovery 1502/udp #Shiva
+imtc-mcs 1503/tcp #Databeam
+imtc-mcs 1503/udp #Databeam
+evb-elm 1504/tcp #EVB Software Engineering License Manager
+evb-elm 1504/udp #EVB Software Engineering License Manager
+funkproxy 1505/tcp #Funk Software, Inc.
+funkproxy 1505/udp #Funk Software, Inc.
+utcd 1506/tcp #Universal Time daemon (utcd)
+utcd 1506/udp #Universal Time daemon (utcd)
+symplex 1507/tcp
+symplex 1507/udp
+diagmond 1508/tcp
+diagmond 1508/udp
+robcad-lm 1509/tcp #Robcad, Ltd. License Manager
+robcad-lm 1509/udp #Robcad, Ltd. License Manager
+mvx-lm 1510/tcp #Midland Valley Exploration Ltd. Lic. Man.
+mvx-lm 1510/udp #Midland Valley Exploration Ltd. Lic. Man.
+3l-l1 1511/tcp
+3l-l1 1511/udp
+wins 1512/tcp #Microsoft's Windows Internet Name Service
+wins 1512/udp #Microsoft's Windows Internet Name Service
+fujitsu-dtc 1513/tcp #Fujitsu Systems Business of America, Inc
+fujitsu-dtc 1513/udp #Fujitsu Systems Business of America, Inc
+fujitsu-dtcns 1514/tcp #Fujitsu Systems Business of America, Inc
+fujitsu-dtcns 1514/udp #Fujitsu Systems Business of America, Inc
+ifor-protocol 1515/tcp
+ifor-protocol 1515/udp
+vpad 1516/tcp #Virtual Places Audio data
+vpad 1516/udp #Virtual Places Audio data
+vpac 1517/tcp #Virtual Places Audio control
+vpac 1517/udp #Virtual Places Audio control
+vpvd 1518/tcp #Virtual Places Video data
+vpvd 1518/udp #Virtual Places Video data
+vpvc 1519/tcp #Virtual Places Video control
+vpvc 1519/udp #Virtual Places Video control
+atm-zip-office 1520/tcp #atm zip office
+atm-zip-office 1520/udp #atm zip office
+ncube-lm 1521/tcp #nCube License Manager
+ncube-lm 1521/udp #nCube License Manager
+rna-lm 1522/tcp #Ricardo North America License Manager
+rna-lm 1522/udp #Ricardo North America License Manager
+cichild-lm 1523/tcp
+cichild-lm 1523/udp
+ingreslock 1524/tcp #ingres
+ingreslock 1524/udp #ingres
+prospero-np 1525/tcp #Prospero Directory Service non-priv
+prospero-np 1525/udp #Prospero Directory Service non-priv
+#PROBLEMS!========================================================
+orasrv 1525/tcp #oracle
+orasrv 1525/udp #oracle
+#PROBLEMS!========================================================
+pdap-np 1526/tcp #Prospero Data Access Prot non-priv
+pdap-np 1526/udp #Prospero Data Access Prot non-priv
+tlisrv 1527/tcp #oracle
+tlisrv 1527/udp #oracle
+mciautoreg 1528/tcp
+mciautoreg 1528/udp
+support 1529/tcp prmsd gnatsd # cygnus bug tracker
+coauthor 1529/tcp #oracle
+coauthor 1529/udp #oracle
+rap-service 1530/tcp
+rap-service 1530/udp
+rap-listen 1531/tcp
+rap-listen 1531/udp
+miroconnect 1532/tcp
+miroconnect 1532/udp
+virtual-places 1533/tcp #Virtual Places Software
+virtual-places 1533/udp #Virtual Places Software
+micromuse-lm 1534/tcp
+micromuse-lm 1534/udp
+ampr-info 1535/tcp
+ampr-info 1535/udp
+ampr-inter 1536/tcp
+ampr-inter 1536/udp
+sdsc-lm 1537/tcp
+sdsc-lm 1537/udp
+3ds-lm 1538/tcp
+3ds-lm 1538/udp
+intellistor-lm 1539/tcp #Intellistor License Manager
+intellistor-lm 1539/udp #Intellistor License Manager
+rds 1540/tcp
+rds 1540/udp
+rds2 1541/tcp
+rds2 1541/udp
+gridgen-elmd 1542/tcp
+gridgen-elmd 1542/udp
+simba-cs 1543/tcp
+simba-cs 1543/udp
+aspeclmd 1544/tcp
+aspeclmd 1544/udp
+vistium-share 1545/tcp
+vistium-share 1545/udp
+abbaccuray 1546/tcp
+abbaccuray 1546/udp
+laplink 1547/tcp
+laplink 1547/udp
+axon-lm 1548/tcp #Axon License Manager
+axon-lm 1548/udp #Axon License Manager
+shivahose 1549/tcp #Shiva Hose
+shivasound 1549/udp #Shiva Sound
+3m-image-lm 1550/tcp #Image Storage license manager 3M Company
+3m-image-lm 1550/udp #Image Storage license manager 3M Company
+hecmtl-db 1551/tcp
+hecmtl-db 1551/udp
+pciarray 1552/tcp
+pciarray 1552/udp
+issd 1600/tcp
+issd 1600/udp
+# IMPORTANT NOTE: Ports 1645/1646 are the traditional radius ports used by
+# many vendors without obtaining official IANA assignment. The official
+# assignment is now ports 1812/1813 and users are encouraged to migrate
+# when possible to these new ports.
+#radius 1645/udp #RADIUS authentication protocol (old)
+#radacct 1646/udp #RADIUS accounting protocol (old)
+nkd 1650/tcp
+nkd 1650/udp
+shiva_confsrvr 1651/tcp
+shiva_confsrvr 1651/udp
+xnmp 1652/tcp
+xnmp 1652/udp
+netview-aix-1 1661/tcp
+netview-aix-1 1661/udp
+netview-aix-2 1662/tcp
+netview-aix-2 1662/udp
+netview-aix-3 1663/tcp
+netview-aix-3 1663/udp
+netview-aix-4 1664/tcp
+netview-aix-4 1664/udp
+netview-aix-5 1665/tcp
+netview-aix-5 1665/udp
+netview-aix-6 1666/tcp
+netview-aix-6 1666/udp
+netview-aix-7 1667/tcp
+netview-aix-7 1667/udp
+netview-aix-8 1668/tcp
+netview-aix-8 1668/udp
+netview-aix-9 1669/tcp
+netview-aix-9 1669/udp
+netview-aix-10 1670/tcp
+netview-aix-10 1670/udp
+netview-aix-11 1671/tcp
+netview-aix-11 1671/udp
+netview-aix-12 1672/tcp
+netview-aix-12 1672/udp
+l2f 1701/tcp #l2f
+l2f 1701/udp #l2f
+l2tp 1701/tcp #Layer 2 Tunnelling Protocol
+l2tp 1701/udp #Layer 2 Tunnelling Protocol
+pptp 1723/tcp #Point-to-point tunnelling protocol
+# IMPORTANT NOTE: See comments for ports 1645/1646 when using older equipment
+radius 1812/udp #RADIUS authentication protocol (IANA sanctioned)
+radacct 1813/udp #RADIUS accounting protocol (IANA sanctioned)
+licensedaemon 1986/tcp #cisco license management
+licensedaemon 1986/udp #cisco license management
+tr-rsrb-p1 1987/tcp #cisco RSRB Priority 1 port
+tr-rsrb-p1 1987/udp #cisco RSRB Priority 1 port
+tr-rsrb-p2 1988/tcp #cisco RSRB Priority 2 port
+tr-rsrb-p2 1988/udp #cisco RSRB Priority 2 port
+tr-rsrb-p3 1989/tcp #cisco RSRB Priority 3 port
+tr-rsrb-p3 1989/udp #cisco RSRB Priority 3 port
+#PROBLEMS!===================================================
+mshnet 1989/tcp #MHSnet system
+mshnet 1989/udp #MHSnet system
+#PROBLEMS!===================================================
+stun-p1 1990/tcp #cisco STUN Priority 1 port
+stun-p1 1990/udp #cisco STUN Priority 1 port
+stun-p2 1991/tcp #cisco STUN Priority 2 port
+stun-p2 1991/udp #cisco STUN Priority 2 port
+stun-p3 1992/tcp #cisco STUN Priority 3 port
+stun-p3 1992/udp #cisco STUN Priority 3 port
+#PROBLEMS!===================================================
+ipsendmsg 1992/tcp
+ipsendmsg 1992/udp
+#PROBLEMS!===================================================
+snmp-tcp-port 1993/tcp #cisco SNMP TCP port
+snmp-tcp-port 1993/udp #cisco SNMP TCP port
+stun-port 1994/tcp #cisco serial tunnel port
+stun-port 1994/udp #cisco serial tunnel port
+perf-port 1995/tcp #cisco perf port
+perf-port 1995/udp #cisco perf port
+tr-rsrb-port 1996/tcp #cisco Remote SRB port
+tr-rsrb-port 1996/udp #cisco Remote SRB port
+gdp-port 1997/tcp #cisco Gateway Discovery Protocol
+gdp-port 1997/udp #cisco Gateway Discovery Protocol
+x25-svc-port 1998/tcp #cisco X.25 service (XOT)
+x25-svc-port 1998/udp #cisco X.25 service (XOT)
+tcp-id-port 1999/tcp #cisco identification port
+tcp-id-port 1999/udp #cisco identification port
+callbook 2000/tcp
+callbook 2000/udp
+dc 2001/tcp
+wizard 2001/udp #curry
+globe 2002/tcp
+globe 2002/udp
+cfingerd 2003/tcp #GNU finger
+mailbox 2004/tcp
+emce 2004/udp #CCWS mm conf
+berknet 2005/tcp
+oracle 2005/udp
+invokator 2006/tcp
+raid-cc 2006/udp #raid
+dectalk 2007/tcp
+raid-am 2007/udp
+conf 2008/tcp
+terminaldb 2008/udp
+news 2009/tcp
+whosockami 2009/udp
+search 2010/tcp
+pipe_server 2010/udp
+raid-cc 2011/tcp #raid
+servserv 2011/udp
+ttyinfo 2012/tcp
+raid-ac 2012/udp
+raid-am 2013/tcp
+raid-cd 2013/udp
+troff 2014/tcp
+raid-sf 2014/udp
+cypress 2015/tcp
+raid-cs 2015/udp
+bootserver 2016/tcp
+bootserver 2016/udp
+cypress-stat 2017/tcp
+bootclient 2017/udp
+terminaldb 2018/tcp
+rellpack 2018/udp
+whosockami 2019/tcp
+about 2019/udp
+xinupageserver 2020/tcp
+xinupageserver 2020/udp
+servexec 2021/tcp
+xinuexpansion1 2021/udp
+down 2022/tcp
+xinuexpansion2 2022/udp
+xinuexpansion3 2023/tcp
+xinuexpansion3 2023/udp
+xinuexpansion4 2024/tcp
+xinuexpansion4 2024/udp
+ellpack 2025/tcp
+xribs 2025/udp
+scrabble 2026/tcp
+scrabble 2026/udp
+shadowserver 2027/tcp
+shadowserver 2027/udp
+submitserver 2028/tcp
+submitserver 2028/udp
+device2 2030/tcp
+device2 2030/udp
+blackboard 2032/tcp
+blackboard 2032/udp
+glogger 2033/tcp
+glogger 2033/udp
+scoremgr 2034/tcp
+scoremgr 2034/udp
+imsldoc 2035/tcp
+imsldoc 2035/udp
+objectmanager 2038/tcp
+objectmanager 2038/udp
+lam 2040/tcp
+lam 2040/udp
+interbase 2041/tcp
+interbase 2041/udp
+isis 2042/tcp
+isis 2042/udp
+isis-bcast 2043/tcp
+isis-bcast 2043/udp
+rimsl 2044/tcp
+rimsl 2044/udp
+cdfunc 2045/tcp
+cdfunc 2045/udp
+sdfunc 2046/tcp
+sdfunc 2046/udp
+#dls 2047/tcp
+#dls 2047/udp
+dls-monitor 2048/tcp
+dls-monitor 2048/udp
+nfsd 2049/tcp nfs # NFS server daemon
+nfsd 2049/udp nfs # NFS server daemon
+#PROBLEMS!=============================================================
+#shilp 2049/tcp
+#shilp 2049/udp
+#PROBLEMS!=============================================================
+dlsrpn 2065/tcp #Data Link Switch Read Port Number
+dlsrpn 2065/udp #Data Link Switch Read Port Number
+dlswpn 2067/tcp #Data Link Switch Write Port Number
+dlswpn 2067/udp #Data Link Switch Write Port Number
+zephyr-clt 2103/udp #Zephyr serv-hm connection
+zephyr-hm 2104/udp #Zephyr hostmanager
+#PROBLEMS!=============================================================
+#zephyr-hm-srv 2105/udp #Zephyr hm-serv connection
+#PROBLEMS!=============================================================
+eklogin 2105/tcp #Kerberos (v4) encrypted rlogin
+eklogin 2105/udp #Kerberos (v4) encrypted rlogin
+ekshell 2106/tcp #Kerberos (v4) encrypted rshell
+ekshell 2106/udp #Kerberos (v4) encrypted rshell
+rkinit 2108/tcp #Kerberos (v4) remote initialization
+rkinit 2108/udp #Kerberos (v4) remote initialization
+ats 2201/tcp #Advanced Training System Program
+ats 2201/udp #Advanced Training System Program
+ivs-video 2232/tcp #IVS Video default
+ivs-video 2232/udp #IVS Video default
+ivsd 2241/tcp #IVS Daemon
+ivsd 2241/udp #IVS Daemon
+pehelp 2307/tcp
+pehelp 2307/udp
+cvspserver 2401/tcp #CVS network server
+cvspserver 2401/udp #CVS network server
+venus 2430/tcp #venus
+venus 2430/udp #venus
+venus-se 2431/tcp #venus-se
+venus-se 2431/udp #venus-se
+codasrv 2432/tcp #codasrv
+codasrv 2432/udp #codasrv
+codasrv-se 2433/tcp #codasrv-se
+codasrv-se 2433/udp #codasrv-se
+rtsserv 2500/tcp #Resource Tracking system server
+rtsserv 2500/udp #Resource Tracking system server
+rtsclient 2501/tcp #Resource Tracking system client
+rtsclient 2501/udp #Resource Tracking system client
+hp-3000-telnet 2564/tcp #HP 3000 NS/VT block mode telnet
+zebrasrv 2600/tcp #zebra service
+zebra 2601/tcp #zebra vty
+ripd 2602/tcp #RIPd vty
+ripngd 2603/tcp #RIPngd vty
+ospfd 2604/tcp #OSPFd vty
+bgpd 2605/tcp #BGPd vty
+ospf6d 2606/tcp #OSPF6d vty
+dict 2628/tcp #RFC 2229
+dict 2628/udp #RFC 2229
+listen 2766/tcp #System V listener port
+www-dev 2784/tcp #world wide web - development
+www-dev 2784/udp #world wide web - development
+eppc 3031/tcp #Remote AppleEvents/PPC Toolbox
+eppc 3031/udp #Remote AppleEvents/PPC Toolbox
+NSWS 3049/tcp
+NSWS 3049/udp
+gds_db 3050/tcp #InterBase Database Remote Protocol
+gds_db 3050/udp #InterBase Database Remote Protocol
+sj3 3086/tcp #SJ3 (kanji input)
+vmodem 3141/tcp
+vmodem 3141/udp
+ccmail 3264/tcp #cc:mail/lotus
+ccmail 3264/udp #cc:mail/lotus
+dec-notes 3333/tcp #DEC Notes
+dec-notes 3333/udp #DEC Notes
+rdp 3389/tcp #Microsoft Remote Desktop Protocol
+bmap 3421/tcp #Bull Apprise portmapper
+bmap 3421/udp #Bull Apprise portmapper
+prsvp 3455/tcp #RSVP Port
+prsvp 3455/udp rsvp-encap #RSVP Port
+vat 3456/tcp #VAT default data
+vat 3456/udp #VAT default data
+vat-control 3457/tcp #VAT default control
+vat-control 3457/udp #VAT default control
+nut 3493/tcp #Network UPS Tools
+nut 3493/udp #Network UPS Tools
+tsp 3653/tcp #Tunnel Setup Protocol
+tsp 3653/udp #Tunnel Setup Protocol
+svn 3690/tcp #Subversion
+svn 3690/udp #Subversion
+udt_os 3900/tcp #Unidata UDT OS
+udt_os 3900/udp #Unidata UDT OS
+mapper-nodemgr 3984/tcp #MAPPER network node manager
+mapper-nodemgr 3984/udp #MAPPER network node manager
+mapper-mapethd 3985/tcp #MAPPER TCP/IP server
+mapper-mapethd 3985/udp #MAPPER TCP/IP server
+mapper-ws_ethd 3986/tcp #MAPPER workstation server
+mapper-ws_ethd 3986/udp #MAPPER workstation server
+netcheque 4008/tcp #NetCheque accounting
+netcheque 4008/udp #NetCheque accounting
+lockd 4045/udp # NFS lock daemon/manager
+lockd 4045/tcp
+nuts_dem 4132/tcp #NUTS Daemon
+nuts_dem 4132/udp #NUTS Daemon
+nuts_bootp 4133/tcp #NUTS Bootp Server
+nuts_bootp 4133/udp #NUTS Bootp Server
+rwhois 4321/tcp #Remote Who Is
+rwhois 4321/udp #Remote Who Is
+unicall 4343/tcp
+unicall 4343/udp
+krb524 4444/tcp
+krb524 4444/udp
+# PROBLEM krb524 assigned the port,
+# PROBLEM nv used it without an assignment
+nv-video 4444/tcp #NV Video default
+nv-video 4444/udp #NV Video default
+sae-urn 4500/tcp
+sae-urn 4500/udp
+fax 4557/tcp #FAX transmission service
+hylafax 4559/tcp #HylaFAX client-server protocol
+rfa 4672/tcp #remote file access server
+rfa 4672/udp #remote file access server
+commplex-main 5000/tcp
+commplex-main 5000/udp
+commplex-link 5001/tcp
+commplex-link 5001/udp
+rfe 5002/tcp #radio free ethernet
+rfe 5002/udp #radio free ethernet
+telelpathstart 5010/tcp
+telelpathstart 5010/udp
+telelpathattack 5011/tcp
+telelpathattack 5011/udp
+mmcc 5050/tcp #multimedia conference control tool
+mmcc 5050/udp #multimedia conference control tool
+rmonitor_secure 5145/tcp
+rmonitor_secure 5145/udp
+aol 5190/tcp #America-Online
+aol 5190/udp #America-Online
+aol-1 5191/tcp #AmericaOnline1
+aol-1 5191/udp #AmericaOnline1
+aol-2 5192/tcp #AmericaOnline2
+aol-2 5192/udp #AmericaOnline2
+aol-3 5193/tcp #AmericaOnline3
+aol-3 5193/udp #AmericaOnline3
+jabber-client 5222/tcp #Jabber Client Connection
+jabber-client 5222/udp #Jabber Client Connection
+padl2sim 5236/tcp
+padl2sim 5236/udp
+jabber-server 5269/tcp #Jabber Server Connection
+jabber-server 5269/udp #Jabber Server Connection
+hacl-hb 5300/tcp # HA cluster heartbeat
+hacl-hb 5300/udp # HA cluster heartbeat
+hacl-gs 5301/tcp # HA cluster general services
+hacl-gs 5301/udp # HA cluster general services
+hacl-cfg 5302/tcp # HA cluster configuration
+hacl-cfg 5302/udp # HA cluster configuration
+hacl-probe 5303/tcp # HA cluster probing
+hacl-probe 5303/udp # HA cluster probing
+hacl-local 5304/tcp
+hacl-local 5304/udp
+hacl-test 5305/tcp
+hacl-test 5305/udp
+cfengine 5308/tcp
+cfengine 5308/udp
+mdns 5353/tcp #Multicast DNS
+mdns 5353/udp #Multicast DNS
+postgresql 5432/tcp #PostgreSQL Database
+postgresql 5432/udp #PostgreSQL Database
+rplay 5555/udp
+canna 5680/tcp #Canna (Japanese Input)
+proshareaudio 5713/tcp #proshare conf audio
+proshareaudio 5713/udp #proshare conf audio
+prosharevideo 5714/tcp #proshare conf video
+prosharevideo 5714/udp #proshare conf video
+prosharedata 5715/tcp #proshare conf data
+prosharedata 5715/udp #proshare conf data
+prosharerequest 5716/tcp #proshare conf request
+prosharerequest 5716/udp #proshare conf request
+prosharenotify 5717/tcp #proshare conf notify
+prosharenotify 5717/udp #proshare conf notify
+cvsup 5999/tcp #CVSup file transfer/John Polstra/FreeBSD
+x11 6000/tcp #6000-6063 are assigned to X Window System
+x11 6000/udp
+x11-ssh 6010/tcp #Unofficial name, for convenience
+x11-ssh 6010/udp
+softcm 6110/tcp #HP SoftBench CM
+softcm 6110/udp #HP SoftBench CM
+spc 6111/tcp #HP SoftBench Sub-Process Control
+spc 6111/udp #HP SoftBench Sub-Process Control
+meta-corp 6141/tcp #Meta Corporation License Manager
+meta-corp 6141/udp #Meta Corporation License Manager
+aspentec-lm 6142/tcp #Aspen Technology License Manager
+aspentec-lm 6142/udp #Aspen Technology License Manager
+watershed-lm 6143/tcp #Watershed License Manager
+watershed-lm 6143/udp #Watershed License Manager
+statsci1-lm 6144/tcp #StatSci License Manager - 1
+statsci1-lm 6144/udp #StatSci License Manager - 1
+statsci2-lm 6145/tcp #StatSci License Manager - 2
+statsci2-lm 6145/udp #StatSci License Manager - 2
+lonewolf-lm 6146/tcp #Lone Wolf Systems License Manager
+lonewolf-lm 6146/udp #Lone Wolf Systems License Manager
+montage-lm 6147/tcp #Montage License Manager
+montage-lm 6147/udp #Montage License Manager
+ricardo-lm 6148/tcp #Ricardo North America License Manager
+ricardo-lm 6148/udp #Ricardo North America License Manager
+xdsxdm 6558/tcp
+xdsxdm 6558/udp
+ircd 6667/tcp #Internet Relay Chat (unoffical)
+acmsoda 6969/tcp
+acmsoda 6969/udp
+afs3-fileserver 7000/tcp #file server itself
+afs3-fileserver 7000/udp #file server itself
+afs3-callback 7001/tcp #callbacks to cache managers
+afs3-callback 7001/udp #callbacks to cache managers
+afs3-prserver 7002/tcp #users & groups database
+afs3-prserver 7002/udp #users & groups database
+afs3-vlserver 7003/tcp #volume location database
+afs3-vlserver 7003/udp #volume location database
+afs3-kaserver 7004/tcp #AFS/Kerberos authentication service
+afs3-kaserver 7004/udp #AFS/Kerberos authentication service
+afs3-volser 7005/tcp #volume management server
+afs3-volser 7005/udp #volume management server
+afs3-errors 7006/tcp #error interpretation service
+afs3-errors 7006/udp #error interpretation service
+afs3-bos 7007/tcp #basic overseer process
+afs3-bos 7007/udp #basic overseer process
+afs3-update 7008/tcp #server-to-server updater
+afs3-update 7008/udp #server-to-server updater
+afs3-rmtsys 7009/tcp #remote cache manager service
+afs3-rmtsys 7009/udp #remote cache manager service
+afs3-resserver 7010/tcp #MR-AFS residence server
+afs3-resserver 7010/udp #MR-AFS residence server
+ups-onlinet 7010/tcp #onlinet uninterruptable power supplies
+ups-onlinet 7010/udp #onlinet uninterruptable power supplies
+afs3-remio 7011/tcp #MR-AFS remote IO server
+afs3-remio 7011/udp #MR-AFS remote IO server
+font-service 7100/tcp #X Font Service
+font-service 7100/udp #X Font Service
+fodms 7200/tcp #FODMS FLIP
+fodms 7200/udp #FODMS FLIP
+dlip 7201/tcp
+dlip 7201/udp
+ftp-proxy 8021/tcp # FTP proxy
+natd 8668/divert # Network Address Translation
+jetdirect 9100/tcp #HP JetDirect card
+git 9418/tcp # Git Version Control System
+man 9535/tcp
+man 9535/udp
+sd 9876/tcp #Session Director
+sd 9876/udp #Session Director
+amanda 10080/udp #Dump server control
+amandaidx 10082/tcp #Amanda indexing
+amidxtape 10083/tcp #Amanda tape indexing
+isode-dua 17007/tcp
+isode-dua 17007/udp
+biimenu 18000/tcp #Beckman Instruments, Inc.
+biimenu 18000/udp #Beckman Instruments, Inc.
+wnn4 22273/tcp wnn6 #Wnn4 (Japanese input)
+wnn4_Cn 22289/tcp wnn6_Cn #Wnn4 (Chinese input)
+wnn4_Kr 22305/tcp wnn6_Kr #Wnn4 (Korean input)
+wnn4_Tw 22321/tcp wnn6_Tw #Wnn4 (Taiwanse input)
+wnn6_DS 26208/tcp #Wnn6 (Dserver)
+dbbrowse 47557/tcp #Databeam Corporation
+dbbrowse 47557/udp #Databeam Corporation
--- /dev/null
+root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7:::
+daemon:!:13200:0:99999:7:::
+bin:!:13200:0:99999:7:::
+sys:!:13200:0:99999:7:::
+sync:!:13200:0:99999:7:::
+mail:!:13200:0:99999:7:::
+proxy:!:13200:0:99999:7:::
+www-data:!:13200:0:99999:7:::
+backup:!:13200:0:99999:7:::
+operator:!:13200:0:99999:7:::
+haldaemon:!:13200:0:99999:7:::
+dbus:!:13200:0:99999:7:::
+ftp:!:13200:0:99999:7:::
+dnsmasq:!:13200:0:99999:7:::
+sshd:!:13200:0:99999:7:::
+nobody:!:13200:0:99999:7:::
+avr32:$1$TVWxUVs7$/ze18sFeD6F26w0hgyB6M.:13200:0:99999:7:::
+default:!:13200:0:99999:7:::
--- /dev/null
+# /etc/shells: valid login shells
+/bin/ash
+/bin/sh
+/bin/zsh
+/bin/bash
+/usr/bin/zsh
+/usr/bin/bash
+/usr/bin/screen
--- /dev/null
+# ~/.bash_logout: executed by bash(1) when login shell exits.
+
+# when leaving the console clear the screen to increase privacy
+
+case "`tty`" in
+ /dev/tty[0-9]*) clear
+esac
--- /dev/null
+# .bash_profile
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\
+/usr/bin/X11:\
+/usr/local/bin
+
+umask 022
+
+if [ -f ~/.bashrc ]; then
+ source ~/.bashrc
+fi
--- /dev/null
+# ~/.bashrc: executed by bash(1) for non-login interactive shells.
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\
+/usr/bin/X11:\
+/usr/local/bin
+
+# If running interactively, then:
+if [ "$PS1" ]; then
+
+ if [ "$BASH" ]; then
+ export PS1="[\u@\h \W]\\$ "
+ else
+ if [ "`id -u`" -eq 0 ]; then
+ export PS1='# '
+ else
+ export PS1='$ '
+ fi
+ fi
+
+ export USER=`id -un`
+ export LOGNAME=$USER
+ export HOSTNAME=`/bin/hostname`
+ export HISTSIZE=1000
+ export HISTFILESIZE=1000
+ export PAGER='/bin/more '
+ export EDITOR='/bin/vi'
+ export INPUTRC=/etc/inputrc
+ export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+ export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
+
+ ### Some aliases
+ alias ps2='ps facux '
+ alias ps1='ps faxo "%U %t %p %a" '
+ alias af='ps af'
+ alias cls='clear'
+ alias ll='/bin/ls --color=tty -laFh'
+ alias ls='/bin/ls --color=tty -F'
+ alias df='df -h'
+ alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
+ #alias bc='bc -l'
+ alias minicom='minicom -c on'
+ alias calc='calc -Cd '
+ alias bc='calc -Cd '
+fi;
--- /dev/null
+#!/bin/sh
+
+
+case $1 in
+ deconfig)
+ ifconfig $interface 0.0.0.0
+ ;;
+ bound|renew)
+ ifconfig $interface $ip netmask $subnet broadcast $broadcast
+ route add default gw $router
+ echo -n > /etc/resolv.conf
+ [ -z "$domain" ] || echo "domain $domain" >> /etc/resolv.conf
+ for n in $dns; do echo "nameserver $n" >> /etc/resolv.conf; done
+ if [ ! -z "$hostname" ]; then
+ echo $hostname > /etc/hostname
+ hostname $hostname
+ fi
+ ;;
+esac
projects / buildroot.git / commitdiff
