#include "gdb-events.h"
#include "mi/mi-common.h"
+#include "gdb_stdint.h"
+
/* Prototypes for local functions. */
static void until_break_command_continuation (struct continuation_arg *arg);
static struct bp_location *
allocate_bp_location (struct breakpoint *bpt, enum bptype bp_type);
-static void
-unlink_locations_from_global_list (struct breakpoint *bpt);
+static void update_global_location_list (void);
-static int
-is_hardware_watchpoint (struct breakpoint *bpt);
+static void update_global_location_list_nothrow (void);
+
+static int is_hardware_watchpoint (struct breakpoint *bpt);
+
+static void insert_breakpoint_locations (void);
static const char *
bpdisp_text (enum bpdisp disp)
value);
}
+/* If 1, gdb will keep breakpoints inserted even as inferior is stopped,
+ and immediately insert any new breakpoints. If 0, gdb will insert
+ breakpoints into inferior only when resuming it, and will remove
+ breakpoints upon stop. */
+static int always_inserted_mode = 0;
+static void
+show_always_inserted_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Always inserted breakpoint mode is %s.\n"), value);
+}
+
void _initialize_breakpoint (void);
struct bp_location *loc;
bpstat bs;
- unlink_locations_from_global_list (b);
- for (loc = b->loc; loc;)
- {
- struct bp_location *loc_next = loc->next;
- remove_breakpoint (loc, mark_uninserted);
- xfree (loc);
- loc = loc_next;
- }
+ /* We don't free locations. They are stored in
+ bp_location_chain and update_global_locations will
+ eventually delete them and remove breakpoints if
+ needed. */
b->loc = NULL;
if (b->disposition == disp_del_at_next_stop)
}
+/* Returns 1 iff breakpoint location should be
+ inserted in the inferior. */
+static int
+should_be_inserted (struct bp_location *bpt)
+{
+ if (!breakpoint_enabled (bpt->owner))
+ return 0;
+
+ if (bpt->owner->disposition == disp_del_at_next_stop)
+ return 0;
+
+ if (!bpt->enabled || bpt->shlib_disabled || bpt->duplicate)
+ return 0;
+
+ return 1;
+}
+
/* Insert a low-level "breakpoint" of some type. BPT is the breakpoint.
Any error messages are printed to TMP_ERROR_STREAM; and DISABLED_BREAKS,
PROCESS_WARNING, and HW_BREAKPOINT_ERROR are used to report problems.
{
int val = 0;
- if (!breakpoint_enabled (bpt->owner))
- return 0;
-
- if (!bpt->enabled || bpt->shlib_disabled || bpt->inserted || bpt->duplicate)
+ if (!should_be_inserted (bpt) || bpt->inserted)
return 0;
/* Initialize the target-specific information. */
return 0;
}
+/* Make sure all breakpoints are inserted in inferior.
+ Throws exception on any error.
+ A breakpoint that is already inserted won't be inserted
+ again, so calling this function twice is safe. */
+void
+insert_breakpoints (void)
+{
+ struct breakpoint *bpt;
+
+ ALL_BREAKPOINTS (bpt)
+ if (is_hardware_watchpoint (bpt))
+ update_watchpoint (bpt, 0 /* don't reparse. */);
+
+ update_global_location_list ();
+
+ if (!always_inserted_mode && target_has_execution)
+ /* update_global_location_list does not insert breakpoints
+ when always_inserted_mode is not enabled. Explicitly
+ insert them now. */
+ insert_breakpoint_locations ();
+}
+
/* insert_breakpoints is used when starting or continuing the program.
remove_breakpoints is used when the program stops.
Both return zero if successful,
or an `errno' value if could not write the inferior. */
-void
-insert_breakpoints (void)
+static void
+insert_breakpoint_locations (void)
{
struct breakpoint *bpt;
struct bp_location *b, *temp;
struct ui_file *tmp_error_stream = mem_fileopen ();
make_cleanup_ui_file_delete (tmp_error_stream);
-
+
/* Explicitly mark the warning -- this will only be printed if
there was an error. */
fprintf_unfiltered (tmp_error_stream, "Warning:\n");
-
- ALL_BREAKPOINTS (bpt)
- if (is_hardware_watchpoint (bpt))
- update_watchpoint (bpt, 0 /* don't reparse */);
ALL_BP_LOCATIONS_SAFE (b, temp)
{
- if (!breakpoint_enabled (b->owner))
+ if (!should_be_inserted (b) || b->inserted)
continue;
/* There is no point inserting thread-specific breakpoints if the
if (bpt->enable_state != bp_enabled)
continue;
+
+ if (bpt->disposition == disp_del_at_next_stop)
+ continue;
for (loc = bpt->loc; loc; loc = loc->next)
if (!loc->inserted)
return 0;
}
+static void
+restore_always_inserted_mode (void *p)
+{
+ always_inserted_mode = (uintptr_t) p;
+}
+
void
update_breakpoints_after_exec (void)
{
struct breakpoint *b;
struct breakpoint *temp;
+ struct cleanup *cleanup;
/* Doing this first prevents the badness of having delete_breakpoint()
write a breakpoint's current "shadow contents" to lift the bp. That
shadow is NOT valid after an exec()! */
mark_breakpoints_out ();
+ /* The binary we used to debug is now gone, and we're updating
+ breakpoints for the new binary. Until we're done, we should not
+ try to insert breakpoints. */
+ cleanup = make_cleanup (restore_always_inserted_mode,
+ (void *) (uintptr_t) always_inserted_mode);
+ always_inserted_mode = 0;
+
ALL_BREAKPOINTS_SAFE (b, temp)
{
/* Solib breakpoints must be explicitly reset after an exec(). */
}
/* FIXME what about longjmp breakpoints? Re-create them here? */
create_overlay_event_breakpoint ("_ovly_debug_event");
+ do_cleanups (cleanup);
}
int
/* Permanent breakpoints cannot be inserted or removed. */
return 0;
- if (b->owner->type == bp_none)
- warning (_("attempted to remove apparently deleted breakpoint #%d?"),
- b->owner->number);
+ /* The type of none suggests that owner is actually deleted.
+ This should not ever happen. */
+ gdb_assert (b->owner->type != bp_none);
if (b->loc_type == bp_loc_software_breakpoint
|| b->loc_type == bp_loc_hardware_breakpoint)
{
/* We will stop here */
if (b->disposition == disp_disable)
- b->enable_state = bp_disabled;
+ {
+ b->enable_state = bp_disabled;
+ update_global_location_list ();
+ }
if (b->silent)
bs->print = 0;
bs->commands = b->commands;
internal_error (__FILE__, __LINE__, _("unknown breakpoint type"));
}
- /* Add this breakpoint to the end of the chain. */
-
- loc_p = bp_location_chain;
- if (loc_p == 0)
- bp_location_chain = loc;
- else
- {
- while (loc_p->global_next)
- loc_p = loc_p->global_next;
- loc_p->global_next = loc;
- }
-
return loc;
}
{
if (loc->cond)
xfree (loc->cond);
+
+ if (loc->function_name)
+ xfree (loc->function_name);
+
xfree (loc);
}
set_breakpoint_location_function (b->loc);
- check_duplicates (b);
breakpoints_changed ();
return b;
b->silent = 1;
if (func_name)
b->addr_string = xstrdup (func_name);
+ update_global_location_list ();
}
/* Call this routine when stepping and nexting to enable a breakpoint
if (b->type == bp_longjmp)
{
b->enable_state = bp_enabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
|| b->type == bp_longjmp_resume)
{
b->enable_state = bp_disabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
b->enable_state = bp_disabled;
overlay_events_enabled = 0;
}
+ update_global_location_list ();
}
void
if (b->type == bp_overlay_event)
{
b->enable_state = bp_enabled;
- check_duplicates (b);
+ update_global_location_list ();
overlay_events_enabled = 1;
}
}
if (b->type == bp_overlay_event)
{
b->enable_state = bp_disabled;
- check_duplicates (b);
+ update_global_location_list ();
overlay_events_enabled = 0;
}
}
/* addr_string has to be used or breakpoint_re_set will delete me. */
b->addr_string = xstrprintf ("*0x%s", paddr (b->loc->address));
+ update_global_location_list_nothrow ();
+
return b;
}
struct breakpoint *b;
b = create_internal_breakpoint (address, bp_shlib_event);
+ update_global_location_list_nothrow ();
return b;
}
b->enable_state = bp_enabled;
b->disposition = tempflag ? disp_del : disp_donttouch;
b->forked_inferior_pid = 0;
+ update_global_location_list ();
+
mention (b);
}
b->addr_string = NULL;
b->enable_state = bp_enabled;
b->disposition = tempflag ? disp_del : disp_donttouch;
+ update_global_location_list ();
mention (b);
}
b->type);
b->enable_state = bp_enabled;
b->frame_id = frame_id;
- check_duplicates (b);
+ update_global_location_list ();
return;
}
}
&& breakpoint_enabled (b))
{
b->enable_state = bp_call_disabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
}
&& (b->enable_state == bp_call_disabled))
{
b->enable_state = bp_enabled;
- check_duplicates (b);
+ update_global_location_list ();
}
}
}
if (in_thread_list (inferior_ptid))
b->thread = pid_to_thread_id (inferior_ptid);
+ update_global_location_list_nothrow ();
+
return b;
}
\f
cond_string, type, disposition,
thread, ignore_count, from_tty);
}
+
+ update_global_location_list ();
}
/* Parse ARG which is assumed to be a SAL specification possibly
b->ignore_count = ignore_count;
b->disposition = tempflag ? disp_del : disp_donttouch;
b->condition_not_parsed = 1;
+
+ update_global_location_list ();
mention (b);
}
value_free_to_mark (mark);
mention (b);
+ update_global_location_list ();
}
/* Return count of locations need to be watched and can be handled
xfree (sals.sals);
mention (b);
+ update_global_location_list ();
return 1;
}
b->ops = ops;
mention (b);
+ update_global_location_list ();
}
/* Implement the "catch exception" command. */
}
}
-/* Remove locations of breakpoint BPT from
- the global list of breakpoint locations. */
-
static void
-unlink_locations_from_global_list (struct breakpoint *bpt)
+update_global_location_list (void)
{
- /* This code assumes that the locations
- of a breakpoint are found in the global list
- in the same order, but not necessary adjacent. */
- struct bp_location **tmp = &bp_location_chain;
- struct bp_location *here = bpt->loc;
-
- if (here == NULL)
- return;
+ struct breakpoint *b;
+ struct bp_location **next = &bp_location_chain;
+ struct bp_location *loc;
+ struct bp_location *loc2;
+ struct gdb_exception e;
+ VEC(bp_location_p) *old_locations = NULL;
+ int ret;
+ int ix;
+
+ /* Store old locations for future reference. */
+ for (loc = bp_location_chain; loc; loc = loc->global_next)
+ VEC_safe_push (bp_location_p, old_locations, loc);
- for (; *tmp && here;)
+ bp_location_chain = NULL;
+ ALL_BREAKPOINTS (b)
{
- if (*tmp == here)
+ for (loc = b->loc; loc; loc = loc->next)
{
- *tmp = here->global_next;
- here = here->next;
+ *next = loc;
+ next = &(loc->global_next);
+ *next = NULL;
}
- else
+ }
+
+ /* Identify bp_location instances that are no longer present in the new
+ list, and therefore should be freed. Note that it's not necessary that
+ those locations should be removed from inferior -- if there's another
+ location at the same address (previously marked as duplicate),
+ we don't need to remove/insert the location. */
+ for (ix = 0; VEC_iterate(bp_location_p, old_locations, ix, loc); ++ix)
+ {
+ /* Tells if 'loc' is found amoung the new locations. If not, we
+ have to free it. */
+ int found_object = 0;
+ for (loc2 = bp_location_chain; loc2; loc2 = loc2->global_next)
+ if (loc2 == loc)
+ {
+ found_object = 1;
+ break;
+ }
+
+ /* If this location is no longer present, and inserted, look if there's
+ maybe a new location at the same address. If so, mark that one
+ inserted, and don't remove this one. This is needed so that we
+ don't have a time window where a breakpoint at certain location is not
+ inserted. */
+
+ if (loc->inserted)
{
- tmp = &((*tmp)->global_next);
+ /* If the location is inserted now, we might have to remove it. */
+ int keep = 0;
+
+ if (found_object && should_be_inserted (loc))
+ {
+ /* The location is still present in the location list, and still
+ should be inserted. Don't do anything. */
+ keep = 1;
+ }
+ else
+ {
+ /* The location is either no longer present, or got disabled.
+ See if there's another location at the same address, in which
+ case we don't need to remove this one from the target. */
+ if (breakpoint_address_is_meaningful (loc->owner))
+ for (loc2 = bp_location_chain; loc2; loc2 = loc2->global_next)
+ {
+ /* For the sake of should_insert_location. The
+ call to check_duplicates will fix up this later. */
+ loc2->duplicate = 0;
+ if (should_be_inserted (loc2)
+ && loc2 != loc && loc2->address == loc->address)
+ {
+ loc2->inserted = 1;
+ loc2->target_info = loc->target_info;
+ keep = 1;
+ break;
+ }
+ }
+ }
+
+ if (!keep)
+ if (remove_breakpoint (loc, mark_uninserted))
+ {
+ /* This is just about all we can do. We could keep this
+ location on the global list, and try to remove it next
+ time, but there's no particular reason why we will
+ succeed next time.
+
+ Note that at this point, loc->owner is still valid,
+ as delete_breakpoint frees the breakpoint only
+ after calling us. */
+ printf_filtered (_("warning: Error removing breakpoint %d\n"),
+ loc->owner->number);
+ }
}
+
+ if (!found_object)
+ free_bp_location (loc);
+ }
+
+ ALL_BREAKPOINTS (b)
+ {
+ check_duplicates (b);
}
+
+ if (always_inserted_mode && target_has_execution)
+ insert_breakpoint_locations ();
+}
+
+static void
+update_global_location_list_nothrow (void)
+{
+ struct gdb_exception e;
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ update_global_location_list ();
}
/* Delete a breakpoint and clean up all traces of it in the data
{
struct breakpoint *b;
bpstat bs;
- struct bp_location *loc;
+ struct bp_location *loc, *next;
gdb_assert (bpt != NULL);
deprecated_delete_breakpoint_hook (bpt);
breakpoint_delete_event (bpt->number);
- for (loc = bpt->loc; loc; loc = loc->next)
- {
- if (loc->inserted)
- remove_breakpoint (loc, mark_inserted);
-
- if (loc->cond)
- xfree (loc->cond);
-
- if (loc->function_name)
- xfree (loc->function_name);
- }
-
if (breakpoint_chain == bpt)
breakpoint_chain = bpt->next;
break;
}
- unlink_locations_from_global_list (bpt);
-
- check_duplicates (bpt);
-
- if (bpt->type != bp_hardware_watchpoint
- && bpt->type != bp_read_watchpoint
- && bpt->type != bp_access_watchpoint
- && bpt->type != bp_catch_fork
- && bpt->type != bp_catch_vfork
- && bpt->type != bp_catch_exec)
- for (loc = bpt->loc; loc; loc = loc->next)
- {
- /* If this breakpoint location was inserted, and there is
- another breakpoint at the same address, we need to
- insert the other breakpoint. */
- if (loc->inserted)
- {
- struct bp_location *loc2;
- ALL_BP_LOCATIONS (loc2)
- if (loc2->address == loc->address
- && loc2->section == loc->section
- && !loc->duplicate
- && loc2->owner->enable_state != bp_disabled
- && loc2->enabled
- && !loc2->shlib_disabled
- && loc2->owner->enable_state != bp_call_disabled)
- {
- int val;
-
- /* We should never reach this point if there is a permanent
- breakpoint at the same address as the one being deleted.
- If there is a permanent breakpoint somewhere, it should
- always be the only one inserted. */
- if (loc2->owner->enable_state == bp_permanent)
- internal_error (__FILE__, __LINE__,
- _("another breakpoint was inserted on top of "
- "a permanent breakpoint"));
-
- memset (&loc2->target_info, 0, sizeof (loc2->target_info));
- loc2->target_info.placed_address = loc2->address;
- if (b->type == bp_hardware_breakpoint)
- val = target_insert_hw_breakpoint (&loc2->target_info);
- else
- val = target_insert_breakpoint (&loc2->target_info);
-
- /* If there was an error in the insert, print a message, then stop execution. */
- if (val != 0)
- {
- struct ui_file *tmp_error_stream = mem_fileopen ();
- make_cleanup_ui_file_delete (tmp_error_stream);
-
-
- if (b->type == bp_hardware_breakpoint)
- {
- fprintf_unfiltered (tmp_error_stream,
- "Cannot insert hardware breakpoint %d.\n"
- "You may have requested too many hardware breakpoints.\n",
- b->number);
- }
- else
- {
- fprintf_unfiltered (tmp_error_stream, "Cannot insert breakpoint %d.\n", b->number);
- fprintf_filtered (tmp_error_stream, "Error accessing memory address ");
- fputs_filtered (paddress (loc2->address),
- tmp_error_stream);
- fprintf_filtered (tmp_error_stream, ": %s.\n",
- safe_strerror (val));
- }
-
- fprintf_unfiltered (tmp_error_stream,"The same program may be running in another process.");
- target_terminal_ours_for_output ();
- error_stream(tmp_error_stream);
- }
- else
- loc2->inserted = 1;
- }
- }
- }
-
free_command_lines (&bpt->commands);
if (bpt->cond_string != NULL)
xfree (bpt->cond_string);
bs->old_val = NULL;
/* bs->commands will be freed later. */
}
+
+ /* Now that breakpoint is removed from breakpoint
+ list, update the global location list. This
+ will remove locations that used to belong to
+ this breakpoint. Do this before freeing
+ the breakpoint itself, since remove_breakpoint
+ looks at location's owner. It might be better
+ design to have location completely self-contained,
+ but it's not the case now. */
+ update_global_location_list ();
+
+
/* On the chance that someone will soon try again to delete this same
bp, we mark it as deleted before freeing its storage. */
bpt->type = bp_none;
- for (loc = bpt->loc; loc;)
- {
- struct bp_location *loc_next = loc->next;
- xfree (loc);
- loc = loc_next;
- }
xfree (bpt);
}
if (all_locations_are_pending (existing_locations) && sals.nelts == 0)
return;
- unlink_locations_from_global_list (b);
b->loc = NULL;
for (i = 0; i < sals.nelts; ++i)
}
}
- while (existing_locations)
- {
- struct bp_location *next = existing_locations->next;
- free_bp_location (existing_locations);
- existing_locations = next;
- }
+ update_global_location_list ();
}
expanded = expand_line_sal_maybe (sals.sals[0]);
update_breakpoint_locations (b, expanded);
- /* Now that this is re-enabled, check_duplicates
- can be used. */
- check_duplicates (b);
-
xfree (sals.sals);
break;
bpt->enable_state = bp_disabled;
- check_duplicates (bpt);
+ update_global_location_list ();
if (deprecated_modify_breakpoint_hook)
deprecated_modify_breakpoint_hook (bpt);
struct bp_location *loc = find_location_by_number (args);
if (loc)
loc->enabled = 0;
- check_duplicates (loc->owner);
+ update_global_location_list ();
}
else
map_breakpoint_numbers (args, disable_breakpoint);
if (bpt->enable_state != bp_permanent)
bpt->enable_state = bp_enabled;
bpt->disposition = disposition;
- check_duplicates (bpt);
+ update_global_location_list ();
breakpoints_changed ();
if (deprecated_modify_breakpoint_hook)
struct bp_location *loc = find_location_by_number (args);
if (loc)
loc->enabled = 1;
- check_duplicates (loc->owner);
+ update_global_location_list ();
}
else
map_breakpoint_numbers (args, enable_breakpoint);
return 0;
}
+int breakpoints_always_inserted_mode (void)
+{
+ return always_inserted_mode;
+}
+
\f
/* This help string is used for the break, hbreak, tbreak and thbreak commands.
It is defined as a macro to prevent duplication.
show_automatic_hardware_breakpoints,
&breakpoint_set_cmdlist,
&breakpoint_show_cmdlist);
+
+ add_setshow_boolean_cmd ("always-inserted", class_support,
+ &always_inserted_mode, _("\
+Set mode for inserting breakpoints."), _("\
+Show mode for inserting breakpoints."), _("\
+When this mode is off (which is the default), breakpoints are inserted in\n\
+inferior when it is resumed, and removed when execution stops. When this\n\
+mode is on, breakpoints are inserted immediately and removed only when\n\
+the user deletes the breakpoint."),
+ NULL,
+ &show_always_inserted_mode,
+ &breakpoint_set_cmdlist,
+ &breakpoint_show_cmdlist);
automatic_hardware_breakpoints = 1;
}
}
if ((step || singlestep_breakpoints_inserted_p)
- && breakpoint_here_p (read_pc ())
- && !breakpoint_inserted_here_p (read_pc ()))
+ && stepping_over_breakpoint)
{
- /* We're stepping, have breakpoint at PC, and it's
- not inserted. Most likely, proceed has noticed that
- we have breakpoint and tries to single-step over it,
- so that it's not hit. In which case, we need to
- single-step only this thread, and keep others stopped,
- as they can miss this breakpoint if allowed to run.
-
- The current code either has all breakpoints inserted,
- or all removed, so if we let other threads run,
- we can actually miss any breakpoint, not the one at PC. */
+ /* We're allowing a thread to run past a breakpoint it has
+ hit, by single-stepping the thread with the breakpoint
+ removed. In which case, we need to single-step only this
+ thread, and keep others stopped, as they can miss this
+ breakpoint if allowed to run.
+
+ The current code actually removes all breakpoints when
+ doing this, not just the one being stepped over, so if we
+ let other threads run, we can actually miss any
+ breakpoint, not just the one at PC. */
resume_ptid = inferior_ptid;
}
oneproc = 1;
if (oneproc)
- /* We will get a trace trap after one instruction.
- Continue it automatically and insert breakpoints then. */
- stepping_over_breakpoint = 1;
+ {
+ /* We will get a trace trap after one instruction.
+ Continue it automatically and insert breakpoints then. */
+ stepping_over_breakpoint = 1;
+ /* FIXME: if breakpoints are always inserted, we'll trap
+ if trying to single-step over breakpoint. Disable
+ all breakpoints. In future, we'd need to invent some
+ smart way of stepping over breakpoint instruction without
+ hitting breakpoint. */
+ remove_breakpoints ();
+ }
else
insert_breakpoints ();
established. */
if (stop_soon == NO_STOP_QUIETLY)
{
- /* Remove breakpoints, SOLIB_ADD might adjust
- breakpoint addresses via breakpoint_re_set. */
- remove_breakpoints ();
-
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
terminal for any messages produced by
/* NOTE drow/2007-05-11: This might be a good place to check
for "catch load". */
-
- /* Reinsert breakpoints and continue. */
- insert_breakpoints ();
}
/* If we are skipping through a shell, or through shared library
we're attaching or setting up a remote connection. */
if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
{
+ /* Loading of shared libraries might have changed breakpoint
+ addresses. Make sure new breakpoints are inserted. */
+ if (!breakpoints_always_inserted_mode ())
+ insert_breakpoints ();
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
stop_signal = TARGET_SIGNAL_0;
if (prev_pc == read_pc ()
- && breakpoint_here_p (read_pc ())
- && !breakpoint_inserted_here_p (read_pc ())
+ && stepping_over_breakpoint
&& step_resume_breakpoint == NULL)
{
/* We were just starting a new sequence, attempting to
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
- /* Remove breakpoints, we eventually want to step over the
- shlib event breakpoint, and SOLIB_ADD might adjust
- breakpoint addresses via breakpoint_re_set. */
- remove_breakpoints ();
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
gdbarch_decr_pc_after_break needs to just go away. */
deprecated_update_frame_pc_hack (get_current_frame (), read_pc ());
- if (target_has_execution)
+ if (!breakpoints_always_inserted_mode () && target_has_execution)
{
if (remove_breakpoints ())
{
projects / binutils-gdb.git / commitdiff