+2001-06-13 Andreas Jaeger <aj@suse.de>
+
+ * gas/vtable/vtable.exp (run_list_test): Don't run on sparc64.
+
2001-06-06 Peter Jakubek <pjak@snafu.de>
* gas/mri/for.d: Correct for swapped operands.
2001-02-08 Stephane Carrez <Stephane.Carrez@worldnet.fr>
- * gas/mri/mri.exp: Don't execute the M68K specific tests
+ * gas/mri/mri.exp: Don't execute the M68K specific tests
on m6811-elf and m6812-elf targets, still run the generic MRI tests.
2001-02-04 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* gas/arc/arc.exp: Simplified test process for base case
instruction set by adding run_dump_test cases for all base
instructions.
- * gas/arc/adc.s, gas/arc/adc.d: New test cases and dump.
- * gas/arc/add.s, gas/arc/add.d: Likewise.
- * gas/arc/and.s, gas/arc/and.d: Likewise.
- * gas/arc/asl.s, gas/arc/asl.d: Likewise.
- * gas/arc/asr.s, gas/arc/asr.d: Likewise.
- * gas/arc/b.s, gas/arc/b.d: Likewise.
- * gas/arc/bic.s, gas/arc/bic.d: Likewise.
- * gas/arc/bl.s, gas/arc/bl.d: Likewise.
- * gas/arc/brk.s, gas/arc/brk.d: Likewise.
- * gas/arc/extb.s, gas/arc/extb.d: Likewise.
- * gas/arc/extw.s, gas/arc/extw.d: Likewise.
- * gas/arc/flag.s, gas/arc/flag.d: Likewise.
- * gas/arc/j.s, gas/arc/j.d: Likewise.
- * gas/arc/jl.s, gas/arc/jl.d: Likewise.
- * gas/arc/ld.s, gas/arc/ld.d: Likewise.
- * gas/arc/ld2.s, gas/arc/ld2.d: Likewise.
- * gas/arc/lp.s, gas/arc/lp.d: Likewise.
- * gas/arc/lsr.s, gas/arc/lsr.d: Likewise.
- * gas/arc/mov.s, gas/arc/mov.d: Likewise.
- * gas/arc/nop.s, gas/arc/nop.d: Likewise.
- * gas/arc/or.s, gas/arc/or.d: Likewise.
- * gas/arc/rlc.s, gas/arc/rlc.d: Likewise.
- * gas/arc/ror.s, gas/arc/ror.d: Likewise.
- * gas/arc/rrc.s, gas/arc/rrc.d: Likewise.
- * gas/arc/sbc.s, gas/arc/sbc.d: Likewise.
- * gas/arc/sexb.s, gas/arc/sexb.d: Likewise.
- * gas/arc/sexw.s, gas/arc/sexw.d: Likewise.
- * gas/arc/sleep.s, gas/arc/sleep.d: Likewise.
- * gas/arc/add.s, gas/arc/add.d: Likewise.
- * gas/arc/st.s, gas/arc/st.d: Likewise.
- * gas/arc/sub.s, gas/arc/sub.d: Likewise.
- * gas/arc/swi.s, gas/arc/swi.d: Likewise.
- * gas/arc/xor.s, gas/arc/xor.d: Likewise.
+ * gas/arc/adc.s, gas/arc/adc.d: New test cases and dump.
+ * gas/arc/add.s, gas/arc/add.d: Likewise.
+ * gas/arc/and.s, gas/arc/and.d: Likewise.
+ * gas/arc/asl.s, gas/arc/asl.d: Likewise.
+ * gas/arc/asr.s, gas/arc/asr.d: Likewise.
+ * gas/arc/b.s, gas/arc/b.d: Likewise.
+ * gas/arc/bic.s, gas/arc/bic.d: Likewise.
+ * gas/arc/bl.s, gas/arc/bl.d: Likewise.
+ * gas/arc/brk.s, gas/arc/brk.d: Likewise.
+ * gas/arc/extb.s, gas/arc/extb.d: Likewise.
+ * gas/arc/extw.s, gas/arc/extw.d: Likewise.
+ * gas/arc/flag.s, gas/arc/flag.d: Likewise.
+ * gas/arc/j.s, gas/arc/j.d: Likewise.
+ * gas/arc/jl.s, gas/arc/jl.d: Likewise.
+ * gas/arc/ld.s, gas/arc/ld.d: Likewise.
+ * gas/arc/ld2.s, gas/arc/ld2.d: Likewise.
+ * gas/arc/lp.s, gas/arc/lp.d: Likewise.
+ * gas/arc/lsr.s, gas/arc/lsr.d: Likewise.
+ * gas/arc/mov.s, gas/arc/mov.d: Likewise.
+ * gas/arc/nop.s, gas/arc/nop.d: Likewise.
+ * gas/arc/or.s, gas/arc/or.d: Likewise.
+ * gas/arc/rlc.s, gas/arc/rlc.d: Likewise.
+ * gas/arc/ror.s, gas/arc/ror.d: Likewise.
+ * gas/arc/rrc.s, gas/arc/rrc.d: Likewise.
+ * gas/arc/sbc.s, gas/arc/sbc.d: Likewise.
+ * gas/arc/sexb.s, gas/arc/sexb.d: Likewise.
+ * gas/arc/sexw.s, gas/arc/sexw.d: Likewise.
+ * gas/arc/sleep.s, gas/arc/sleep.d: Likewise.
+ * gas/arc/add.s, gas/arc/add.d: Likewise.
+ * gas/arc/st.s, gas/arc/st.d: Likewise.
+ * gas/arc/sub.s, gas/arc/sub.d: Likewise.
+ * gas/arc/swi.s, gas/arc/swi.d: Likewise.
+ * gas/arc/xor.s, gas/arc/xor.d: Likewise.
* gas/arc/warn.s: Removed warning test case for setting of flags
followed by conditional branch, an arc5 only feature.
generate a reloc.
* gas/mips/empic.s: Likewise. Also, correct typo in comment
about expected relocs.
-
+
* gas/mips/mips32.s, gas/mips/mips32.d: New files for MIPS32
instruction assembly test.
* gas/mips/mips.exp: Add the test mentioned above.
* gas/ia64/dv-entry-err.s: Add stop to avoid DV error on cmp.eq.
* gas/ia64/dv-imply.s: Add stops to avoid DV errors on cmp.REL.
Test still fails due to insn opcode pattern changes.
-
+
2000-08-21 H.J. Lu <hjl@gnu.org>
* gas/all/cofftag.d: Support the strict COFF.
* gas/tic54x/*: New tests for tic54x. NOTE: load page has been
moved into the LMA and is not printed separately by objdump any
longer. This still needs to be tested.
-
+
2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
* gas/m68k/all.exp: Don't execute tests if the target is m68hc11&12.
* gas/macros/strings.s: New test: String expansion inside
macros.
* gas/macros/strings.d: New test results.
-
+
2000-06-04 Alan Modra <alan@linuxcare.com.au>
* gas/i386/prefix.s: Modify so we have at least one x86 test that
2000-05-01 Nick Clifton <nickc@cygnus.com>
- * gasp/macro.out: Fix label numbers to remove leading zeroes.
- * gasp/mdouble.out: Fix label numbers to remove leading zeroes.
+ * gasp/macro.out: Fix label numbers to remove leading zeroes.
+ * gasp/mdouble.out: Fix label numbers to remove leading zeroes.
2000-04-25 Alan Modra <alan@linuxcare.com.au>
tnat.nz.orcm, tnat.nz.andcm inputs.
* gas/ia64/opc-i.pl: Insert padding nops before last dep.
* gas/ia64/opc-i.s: Regenerate.
-
+
* gas/ia64/opc-i.s: Regenerate.
* gas/ia64/opc-f.pl: Add explicit stop at end.
-
+
2000-04-22 Timothy Wall <twall@cygnus.com>
* gas/ia64/opc-f.d: Disassemble zeroes to verify break.f.
* gas/vtable/vtable.exp: Disable for ia64.
* gas/ia64: New testsuite directory.
-
+
2000-04-03 Alan Modra <alan@linuxcare.com.au>
* gas/i386/general.s: Check 16-bit immediates, and move call/jump
Some ARM targets (eg PE) generate a reloc based on the label,
whilst others (eg ELF) generate a reloc based on the section
symbol. This meant that the disassembled outputs would differ.
-
+
* gas/arm/inst.s: Change test of BLPL instruction.
* gas/arm/inst.d: Change expected decode of BLPL instruction.
* gas/arm/arm7t.s: Remove use of .LC0 label in .word directive.
Mon Oct 11 13:37:51 1999 Geoffrey Keating <geoffk@cygnus.com>
* lib/gas-defs.exp (regexp_diff): Allow '#...' to mean "some
- indeterminate number of extra lines here".
+ indeterminate number of extra lines here".
* gas/elf/elf.exp: Remove XFAILs.
* gas/elf/section0.d: Make pass on MIPS (and hopefully alpha).
* gas/vtable/vtable.exp: Add [istarget "strongarm*-*-*"] to run
dump test "entry0" instead of "entry1".
-
+
1999-09-01 Scott Bambrough <scottb@netwinder.org>
-
- * gas/vtable/vtable.exp: Added [istarget "arm*-*-*"] to run dump
+
+ * gas/vtable/vtable.exp: Added [istarget "arm*-*-*"] to run dump
test "entry0" instead of "entry1". ARM targets use REL relocs,
and should use the test entry0.
1999-06-03 Philip Blundell <philb@gnu.org>
* gas/arm/arm7t.d, gas/arm/inst.d: Update to match current gas,
- bfd and opcodes.
+ bfd and opcodes.
1999-05-28 Ian Lance Taylor <ian@zembu.com>
1999-05-02 Nick Clifton <nickc@cygnus.com>
* gas/mcore/allinsn.d: Update to match latest assembler
- operations.
+ operations.
1999-04-16 DJ Delorie <dj@cygnus.com>
to keep things from parallelizing where we don't want them to.
* gas/d30v/reloc.s: Fix warning.
-
+
* gas/d30v/opt.d, reloc.d, inst.d: Rebuild.
- * gas/d30v/label.s: New test. Check that labels are aligned
+ * gas/d30v/label.s: New test. Check that labels are aligned
on 8-byte boundaries.
* gas/d30v/guard-debug.s: New test. Test output with "-g".
- * gas/d30v/serial.s: New test. Check for warnings with
+ * gas/d30v/serial.s: New test. Check for warnings with
illegal serial instructions.
* gas/d30v/warn_oddreg.s: New test. CHeck for warnings when
odd-numbered registers are used for some instructions.
- * gas/d30v/bittest.s: New test. Check for bit operation
+ * gas/d30v/bittest.s: New test. Check for bit operation
instructions (BCLR, BNOT, BSET, BTST) in the IU.
* gas/d30v/mul.s: New test. Check for restricted sequences
in a bunch of different multiply instructions.
-
+
* gas/vtable/vtable.exp (run_list_test): Don't
run test on D30V.
1999-03-05 Nick Clifton <nickc@cygnus.com>
* gas/all/gas.exp: Expect strongarm-coff target to fail cofftag
- test.
+ test.
1999-02-13 Jim Blandy <jimb@zwingli.cygnus.com>
* gas/mips/elf_e_flags.c, gas/mips/elf_e_flags.s: New files.
* lib/gas-defs.exp (run_dump_test): Document. It's not
- really trivial.
+ really trivial.
* lib/gas-defs.exp (run_dump_test): Clean up logic for guessing
$program (the dump tool).
Wed Jun 17 14:02:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/mips/delay.d: Add -mcpu=NNNN to gas flags to let test case
- run on differently targeted assembler.
+ run on differently targeted assembler.
* gas/mips/{ld-ilocks-addr32,ld-svr4pic.d}: Ditto.
* gas/mips/{ld-xgot.d,lif-svr4pic.d,lif-xgot.d}: Same.
* gas/mips/{mips16.d,mips4.d,nodelay.d}: Again.
* gas/mips/{trunc.d,uld.d,ulh-xgot.d,usd.d}: And then some.
-
+
* gas/mips/ld-ilocks.d: Removed disassembler flags to let target
- defaults go unmodified. Replaced $f4/$f5 with $fp[45], as the
+ defaults go unmodified. Replaced $f4/$f5 with $fp[45], as the
original `ld.d' had. Find `ld.s'.
* gas/mips/mul-ilocks.d: Nearly ditto.
-
+
Thu Jun 11 16:50:46 1998 Nick Clifton <nickc@cygnus.com>
* gas/d30v/inst.d: Expect repeati instrucitons to be combined.
* gas/d30v/array.d: Updated to match latest assembler results.
* gas/d30v/reloc.d: Partially updated to match latest assembler
- results.
+ results.
Fri Jun 5 19:15:59 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* gas/mips/div-ilocks.d: Handle both "break" instruction variants.
* gas/mips/{div.d, mul-ilocks.d, mul.d}: Likewise.
-
+
Fri May 29 12:07:35 1998 Ian Lance Taylor <ian@cygnus.com>
* gas/mips/mips.exp: Adjust ilocks initialization to match current
Mon May 18 13:11:45 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/mips/{div,ld,mul}.d: Add assembler -mcpu= flag to match
- disassembler.
-
+ disassembler.
+
Fri May 15 14:51:01 1998 Gavin Koch <gavin@cygnus.com>
* gas/mips/mips.exp: Distinguish chains with 32-bit addresses.
Thu May 7 13:05:25 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/mips/break20.[sd]: New tests for 20-bit operand break and
- sddbp instructions.
+ sddbp instructions.
* gas/mips/trap20.[sd]: New tests for 20-bit operand trap
- instructions.
+ instructions.
* gas/mips/mips.exp: Run them.
Thu Apr 30 11:55:01 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/d30v/{inst,array,opt,reloc}.d: Accept <symbol+offset> labels
- in disassembly, where the offset is in hex and has a "0x" prefix.
-
+ in disassembly, where the offset is in hex and has a "0x" prefix.
+
Tue Apr 28 16:38:34 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/mips/lineno.[sd]: Assembly source line number test.
* gas/all/align.s: Back out ".section text" change below;
use ".text" again.
* gas/macros/semi.s: Ditto.
-
+
Fri Mar 20 18:51:49 1998 Frank Ch. Eigler <fche@cygnus.com>
* gas/all/align.s: Identify ".text" section explicitly.
* gas/macros/semi.s: Ditto.
-
-
-
+
+
+
Mon Mar 2 13:30:40 1998 Doug Evans <devans@seba.cygnus.com>
* gas/m32r/allinsn.[sd] (ldi8a,ldi16a): Delete.
Merge changes from Martin Hunt:
- * gas/d30v/inst.s: Add some new tests.
+ * gas/d30v/inst.s: Add some new tests.
- * gas/d30v/{inst, opt, reloc}.d: Update results with
- new disassembler changes.
+ * gas/d30v/{inst, opt, reloc}.d: Update results with
+ new disassembler changes.
- * gas/d30v/inst.[sd]: Update examples for d*i instructions.
+ * gas/d30v/inst.[sd]: Update examples for d*i instructions.
* gas/d30v/*.d: Update all test results because
- of new ".s" and ".l" extensions.
+ of new ".s" and ".l" extensions.
* gas/d30v/inst.[sd]: Correct entry for mulx2h.
- * gas/d30v/opt.[sd]: Correct st2w instruction.
+ * gas/d30v/opt.[sd]: Correct st2w instruction.
* gas/d30v/align.d: Change expected output.
- * gas/d30v/reloc.[sd]: Add test case.
+ * gas/d30v/reloc.[sd]: Add test case.
* gas/d30v/array.[sd]: New test case.
- * gas/d30v/opt.[sd]: Added more test cases.
+ * gas/d30v/opt.[sd]: Added more test cases.
* gas/d30v/opt.s: Add test cases.
- * gas/d30v/reloc.s: Fix a test case.
+ * gas/d30v/reloc.s: Fix a test case.
* gas/d30v/{opt,reloc}.d: Regenerate.
Mon Sep 8 14:21:23 1997 Doug Evans <dje@canuck.cygnus.com>
Mon Jun 2 12:03:32 1997 Gavin Koch <gavin@.cygnus.com>
- * gas/mips/mul.{d,s}: End the tests with no-ops.
+ * gas/mips/mul.{d,s}: End the tests with no-ops.
Mon Jun 2 11:48:58 1997 Gavin Koch <gavin@cygnus.com>
* gas/tic80/{align.d, align.lst, align.s} New test for the
".align" pseudop.
* gas/tic80/tic80.exp: Run the align test.
-
+
Wed Feb 26 20:36:46 1997 Fred Fish <fnf@cygnus.com>
* gas/tic80/{float.d, float.lst, float.s}: New tests for
Wed Feb 26 15:16:04 1997 Fred Fish <fnf@cygnus.com>
* gas/tic80/{regops2.d, regops2.lst, regops2.s, regops3.d,
- regops3.lst, regops3.s, regops4.d, regops4.lst, regops4.s}:
+ regops3.lst, regops3.s, regops4.d, regops4.lst, regops4.s}:
New tests for :m and :s operand modifiers.
* gas/tic80/tic80.exp: Run the regops2, regops3, and regops4 tests.
Mon Feb 24 10:40:28 1997 Fred Fish <fnf@cygnus.com>
* gas/tic80/{add.d, bitnum.d, ccode.d, cregops.d, endmask.d,
- regops.d, relocs1.d,
+ regops.d, relocs1.d,
(relocs1.c): Add file for reference.
(relocs1b.d): Split reloc table contents test to different test file.
(relocs2.c): Add test that uses various types (char, short, int, ...) of
Sat Feb 22 20:24:23 1997 Fred Fish <fnf@cygnus.com>
* gas/tic80/{add.lst, bitnum.lst, ccode.lst, cregops.lst,
- endmask.lst, regops.lst}: Remove ^M's from end of lines.
+ endmask.lst, regops.lst}: Remove ^M's from end of lines.
* gas/tic80/bitnum.s: Add comment to each line showing value
that symbolic BITNUM assembles to. Add coverage for raw
numeric values for the BITNUM operand.
* gas/hppa/unsorted/unsorted.exp (align4 tests): Tweak expected
output.
-
+
Fri Feb 14 17:56:27 1997 Ian Lance Taylor <ian@cygnus.com>
* gas/all/align.d, gas/all/align.s: New test.
Tue Feb 11 14:45:39 1997 Fred Fish <fnf@cygnus.com>
* gas/tic80/{add.d, add.lst, add.s, bitnum.d, bitnum.lst, bitnum.s,
- ccode.d, ccode.lst, ccode.s, cregops.d, cregops.lst, cregops.s,
+ ccode.d, ccode.lst, ccode.s, cregops.d, cregops.lst, cregops.s,
endmask.d, endmask.lst, endmask.s, regops.d, regops.lst, regops.s,
tic80.exp}: New files for TIc80 test cases.
Mon Feb 10 22:24:00 1997 Dawn Perchik <dawn@cygnus.com>
- * gas/mips/itbl-test.c: Add copyright message and fix indentation.
+ * gas/mips/itbl-test.c: Add copyright message and fix indentation.
Mon Feb 10 17:54:00 1997 Dawn Perchik <dawn@cygnus.com>
- * gas/mips/itbl-test.c: New file. Stand-alone assembler and
+ * gas/mips/itbl-test.c: New file. Stand-alone assembler and
dissassembler for itbl support.
Mon Feb 10 17:20:00 1997 Dawn Perchik <dawn@cygnus.com>
* gas/v850/basic.exp (do_branch): Check offsets in branch insns.
(do_jumps): Likewise.
-
+
Fri Aug 30 00:37:55 1996 Jeffrey A Law (law@cygnus.com)
* gas/v850/misc.s: Tweak register numbers for better testing.
* gas/v850/basic.exp (do_branch): Test instruction bit patterns,
but not displacements (yet).
-
+
* gas/v850/basic.exp (do_bit): Test instruction bit patterns.
- * gas/v850/basic.exp (do_arith): Test instruction bit patterns.
+ * gas/v850/basic.exp (do_arith): Test instruction bit patterns.
* gas/v850/arith.s: Tweak constants for better testing.
* gas/v850/basic.exp (do_misc): No longer expect failures
* gas/arm/arm.exp: Change inst.s test to check objdump.
* gas/arm/inst.d: Added.
-
+
Thu Aug 15 16:06:02 1996 James G. Smith <jsmith@cygnus.co.uk>
* gas/arm/thumb.s: Added.
Thu Jul 4 14:01:46 1996 James G. Smith <jsmith@cygnus.co.uk>
* gas/mips/mips.exp: Add new tests for processors with interlocks
- on div and mul.
+ on div and mul.
* gas/mips/div-ilocks.d: Added.
* gas/mips/mul-ilocks.d: Added.
-
+
Wed Jul 3 14:20:04 1996 Ian Lance Taylor <ian@cygnus.com>
* gas/all/gas.exp: Remove setup_xfail for h8300*-*-* for two tests
Wed Jan 3 22:59:53 1996 Ian Lance Taylor <ian@cygnus.com>
* gas/mips/ulh-svr4pic.d: Update for tc-mips.c load_address
- change.
+ change.
Fri Nov 17 10:32:25 1995 Ian Lance Taylor <ian@cygnus.com>
Mon Jul 31 18:19:26 1995 steve chamberlain <sac@slash.cygnus.com>
- * gasp/*: New.
+ * gasp/*: New.
* Makefile.in: Use gasp tests.
* config/default.exp: Add gasp stuff.
* gas/hppa/unsorted/unsorted.exp: Disable align4 tests for
ELF targets.
-Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
+Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
* arm/arm7dm.s: New file -- tests for ARM7DM instructions.
* arm/arm6.s: Correct bogus tests.
* arm/gas.exp (arm6.s): Is now a valid test.
(arm7dm.s): New test.
- * arm/float.s: Add load/store multiple floating point instruction
+ * arm/float.s: Add load/store multiple floating point instruction
tests.
Wed May 3 13:14:44 1995 Jeff Law (law@snake.cs.utah.edu)
Tue Nov 22 23:38:20 1994 Jeff Law (law@snake.cs.utah.edu)
* gas/hppa/reloc/reloc.exp: Minor tweaks to match current PA ELF
- output.
+ output.
Fri Nov 18 17:56:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
Wed Dec 1 10:44:18 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* gas/hppa/reloc/reloc.exp: Run the first half of bogus R_EXIT
- test for ELF.
+ test for ELF.
Tue Nov 30 13:43:21 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* gas/hppa/reloc/reloc.exp (reloc_reduce): Correct offsets at
which specific relocations are expected to be found.
-
+
Sat Oct 30 14:12:31 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* gas/hppa/unsorted/unsorted.exp (ss_align): Remove OSF xfail.
projects / binutils-gdb.git / commitdiff