libstdc++: Support libc with stdio-only I/O in libstdc++

The current libstdc++ basic_file_stdio.cc code assumes a POSIX API
underneath the stdio implementation provided by the host libc. This
means that the host must provide a fairly broad POSIX file API,
including read, write, open, close, lseek and ioctl.

This patch changes basic_file_stdio.cc to only use basic ANSI-C stdio
functions, allowing it to be used with libc implementations like
picolibc which may not have a POSIX operating system underneath.

This is enabled by a new --enable-cstdio=stdio_pure configure option.

Aided-by: Jonathan Wakely <jwakely@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
libstdc++-v3/ChangeLog:

	* acinclude.m4 (GLIBCXX_ENABLE_CSTDIO): Allow "stdio_pure"
	option and define _GLIBCXX_USE_PURE_STDIO when it is used. Also
	add "stdio_posix" option as an alias for "stdio".
	* config/io/basic_file_stdio.cc [_GLIBCXX_USE_PURE_STDIO]: Only
	use defined stdio entry points for all I/O operations, without
	direct calls to underlying POSIX functions.
	* config.h.in: Regenerate.
	* configure: Regenerate.

diff --git a/libstdc++-v3/acinclude.m4 b/libstdc++-v3/acinclude.m4
index 61191812c926cdba88a83c44773fdd9d38c44bb6..df8be3bf805af53e1e33fb0cc1d0c85e44457878 100644 (file)
--- a/libstdc++-v3/acinclude.m4
+++ b/libstdc++-v3/acinclude.m4
@@ -2868,24 +2868,30 @@ AC_DEFUN([GLIBCXX_ENABLE_PARALLEL], [
 
 
 dnl
-dnl Check for which I/O library to use:  stdio, or something specific.
+dnl Check for which I/O library to use:  stdio and POSIX, or pure stdio.
 dnl
-dnl Default is stdio.
+dnl Default is stdio_posix.
 dnl
 AC_DEFUN([GLIBCXX_ENABLE_CSTDIO], [
   AC_MSG_CHECKING([for underlying I/O to use])
   GLIBCXX_ENABLE(cstdio,stdio,[[[=PACKAGE]]],
-    [use target-specific I/O package], [permit stdio])
+    [use target-specific I/O package], [permit stdio|stdio_posix|stdio_pure])
 
-  # Now that libio has been removed, you can have any color you want as long
-  # as it's black.  This is one big no-op until other packages are added, but
-  # showing the framework never hurts.
+  # The only available I/O model is based on stdio, via basic_file_stdio.
+  # The default "stdio" is actually "stdio + POSIX" because it uses fdopen(3)
+  # to get a file descriptor and then uses read(3) and write(3) with it.
+  # The "stdio_pure" model doesn't use fdopen and only uses FILE* for I/O.
   case ${enable_cstdio} in
-    stdio)
+    stdio*)
       CSTDIO_H=config/io/c_io_stdio.h
       BASIC_FILE_H=config/io/basic_file_stdio.h
       BASIC_FILE_CC=config/io/basic_file_stdio.cc
       AC_MSG_RESULT(stdio)
+
+      if test "x$enable_cstdio" = "xstdio_pure" ; then
+       AC_DEFINE(_GLIBCXX_USE_STDIO_PURE, 1,
+                 [Define to restrict std::__basic_file<> to stdio APIs.])
+      fi
       ;;
   esac
 

diff --git a/libstdc++-v3/config.h.in b/libstdc++-v3/config.h.in
index 17b11997d48af71adbb03a9cdcb3ab1140ad2da3..5889f32922e3a9ee84827f6df2466bdaddf9f1f0 100644 (file)
--- a/libstdc++-v3/config.h.in
+++ b/libstdc++-v3/config.h.in
@@ -1044,6 +1044,9 @@
 /* Define if sendfile is available in <sys/sendfile.h>. */
 #undef _GLIBCXX_USE_SENDFILE
 
+/* Define to restrict std::__basic_file<> to stdio APIs. */
+#undef _GLIBCXX_USE_STDIO_PURE
+
 /* Define if struct stat has timespec members. */
 #undef _GLIBCXX_USE_ST_MTIM
 

diff --git a/libstdc++-v3/config/io/basic_file_stdio.cc b/libstdc++-v3/config/io/basic_file_stdio.cc
index ba830fb9e97dbca349b86ace0668286e8d2abdfa..eedffb017b6f1854d40cfe842e956b3b0a8ce2e7 100644 (file)
--- a/libstdc++-v3/config/io/basic_file_stdio.cc
+++ b/libstdc++-v3/config/io/basic_file_stdio.cc
@@ -111,13 +111,21 @@ namespace
 
   // Wrapper handling partial write.
   static std::streamsize
+#ifdef _GLIBCXX_USE_STDIO_PURE
+  xwrite(FILE *__file, const char* __s, std::streamsize __n)
+#else
   xwrite(int __fd, const char* __s, std::streamsize __n)
+#endif
   {
     std::streamsize __nleft = __n;
 
     for (;;)
       {
+#ifdef _GLIBCXX_USE_STDIO_PURE
+       const std::streamsize __ret = fwrite(__file, 1, __nleft, __file);
+#else
        const std::streamsize __ret = write(__fd, __s, __nleft);
+#endif
        if (__ret == -1L && errno == EINTR)
          continue;
        if (__ret == -1L)
@@ -133,7 +141,7 @@ namespace
     return __n - __nleft;
   }
 
-#ifdef _GLIBCXX_HAVE_WRITEV
+#if defined(_GLIBCXX_HAVE_WRITEV) && !defined(_GLIBCXX_USE_STDIO_PURE)
   // Wrapper handling partial writev.
   static std::streamsize
   xwritev(int __fd, const char* __s1, std::streamsize __n1,
@@ -286,9 +294,11 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
   __basic_file<char>::is_open() const throw ()
   { return _M_cfile != 0; }
 
+#ifndef _GLIBCCXX_USE_STDIO_PURE
   int
   __basic_file<char>::fd() throw ()
   { return fileno(_M_cfile); }
+#endif
 
   __c_file*
   __basic_file<char>::file() throw ()
@@ -315,28 +325,46 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
   {
     streamsize __ret;
     do
+#ifdef _GLIBCXX_USE_STDIO_PURE
+      __ret = fread(__s, 1, __n, this->file());
+#else
       __ret = read(this->fd(), __s, __n);
+#endif
     while (__ret == -1L && errno == EINTR);
     return __ret;
   }
 
   streamsize
   __basic_file<char>::xsputn(const char* __s, streamsize __n)
-  { return xwrite(this->fd(), __s, __n); }
+  {
+#ifdef _GLIBCXX_USE_STDIO_PURE
+    return xwrite(this->file(), __s, __n);
+#else
+    return xwrite(this->fd(), __s, __n);
+#endif
+  }
 
   streamsize
   __basic_file<char>::xsputn_2(const char* __s1, streamsize __n1,
                               const char* __s2, streamsize __n2)
   {
     streamsize __ret = 0;
-#ifdef _GLIBCXX_HAVE_WRITEV
+#if defined(_GLIBCXX_HAVE_WRITEV) && !defined(_GLIBCXX_USE_STDIO_PURE)
     __ret = xwritev(this->fd(), __s1, __n1, __s2, __n2);
 #else
     if (__n1)
+#ifdef _GLIBCXX_USE_STDIO_PURE
+      __ret = xwrite(this->file(), __s1, __n1);
+#else
       __ret = xwrite(this->fd(), __s1, __n1);
+#endif
 
     if (__ret == __n1)
+#ifdef _GLIBCXX_USE_STDIO_PURE
+      __ret += xwrite(this->file(), __s2, __n2);
+#else
       __ret += xwrite(this->fd(), __s2, __n2);
+#endif
 #endif
     return __ret;
   }
@@ -350,7 +378,11 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
     if (__off > numeric_limits<off_t>::max()
        || __off < numeric_limits<off_t>::min())
       return -1L;
+#ifdef _GLIBCXX_USE_STDIO_PURE
+    return fseek(this->file(), __off, __way);
+#else
     return lseek(this->fd(), __off, __way);
+#endif
 #endif
   }
 
@@ -361,7 +393,7 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
   streamsize
   __basic_file<char>::showmanyc()
   {
-#ifndef _GLIBCXX_NO_IOCTL
+#if !defined(_GLIBCXX_NO_IOCTL) && !defined(_GLIBCXX_USE_STDIO_PURE)
 #ifdef FIONREAD
     // Pipes and sockets.
     int __num = 0;
@@ -371,7 +403,7 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
 #endif
 #endif
 
-#ifdef _GLIBCXX_HAVE_POLL
+#if defined(_GLIBCXX_HAVE_POLL) && !defined(_GLIBCXX_USE_STDIO_PURE)
     // Cheap test.
     struct pollfd __pfd[1];
     __pfd[0].fd = this->fd();
@@ -395,8 +427,12 @@ _GLIBCXX_BEGIN_NAMESPACE_VERSION
     struct stat __buffer;
     const int __err = fstat(this->fd(), &__buffer);
     if (!__err && _GLIBCXX_ISREG(__buffer.st_mode))
+#ifdef _GLIBCXX_USE_STDIO_PURE
+      return __buffer.st_size - fseek(this->file(), 0, ios_base::cur);
+#else
       return __buffer.st_size - lseek(this->fd(), 0, ios_base::cur);
 #endif
+#endif
 #endif
     return 0;
   }

diff --git a/libstdc++-v3/configure b/libstdc++-v3/configure
index e6f30a1a706315946e60bf5974dfca5fd2ee119d..7647a1821617fed04056478610b375bb3c58334a 100755 (executable)
--- a/libstdc++-v3/configure
+++ b/libstdc++-v3/configure
@@ -16376,7 +16376,7 @@ $as_echo_n "checking for underlying I/O to use... " >&6; }
 if test "${enable_cstdio+set}" = set; then :
   enableval=$enable_cstdio;
       case "$enableval" in
-       stdio) ;;
+       stdio|stdio_posix|stdio_pure) ;;
        *) as_fn_error $? "Unknown argument to enable/disable cstdio" "$LINENO" 5 ;;
                        esac
 
@@ -16386,16 +16386,23 @@ fi
 
 
 
-  # Now that libio has been removed, you can have any color you want as long
-  # as it's black.  This is one big no-op until other packages are added, but
-  # showing the framework never hurts.
+  # The only available I/O model is based on stdio, via basic_file_stdio.
+  # The default "stdio" is actually "stdio + POSIX" because it uses fdopen(3)
+  # to get a file descriptor and then uses read(3) and write(3) with it.
+  # The "stdio_pure" model doesn't use fdopen and only uses FILE* for I/O.
   case ${enable_cstdio} in
-    stdio)
+    stdio*)
       CSTDIO_H=config/io/c_io_stdio.h
       BASIC_FILE_H=config/io/basic_file_stdio.h
       BASIC_FILE_CC=config/io/basic_file_stdio.cc
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: stdio" >&5
 $as_echo "stdio" >&6; }
+
+      if test "x$enable_cstdio" = "xstdio_pure" ; then
+
+$as_echo "#define _GLIBCXX_USE_STDIO_PURE 1" >>confdefs.h
+
+      fi
       ;;
   esac