# Default local prefix if it is empty
-if [ x$local_prefix = x ]; then
+if test x$local_prefix = x; then
local_prefix=/usr/local
fi
# Check whether --enable-c-cpplib or --disable-c-cpplib was given.
if test "${enable_c_cpplib+set}" = set; then
enableval="$enable_c_cpplib"
- if [ x$enable_c_cpplib != xno ]; then
+ if test x$enable_c_cpplib != xno; then
extra_c_objs="${extra_c_objs} cpplib.o cppexp.o cpphash.o cpperror.o"
extra_c_objs="${extra_c_objs} prefix.o"
extra_cxx_objs="${extra_cxx_objs} ../cpplib.o ../cppexp.o ../cpphash.o ../cpperror.o ../prefix.o"
# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
if test "${enable_c_mbchar+set}" = set; then
enableval="$enable_c_mbchar"
- if [ x$enable_c_mbchar != xno ]; then
+ if test x$enable_c_mbchar != xno; then
extra_c_flags=-DMULTIBYTE_CHARS=1
fi
fi
# Check whether --enable-init-priority or --disable-init-priority was given.
if test "${enable_init_priority+set}" = set; then
enableval="$enable_init_priority"
- if [ x$enable_init_priority != xno ]; then
+ if test x$enable_init_priority != xno; then
extra_c_flags=-DUSE_INIT_PRIORITY
fi
fi
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
enableval="$enable_threads"
- if [ x$enable_threads = xno ]; then
+ if test x$enable_threads = xno; then
enable_threads=''
fi
else
# Set this to override the default target model.
target_cpu_default=
# Set this to control which fixincludes program to use.
- if [ x$fast_fixinc != xyes ] ; then
+ if test x$fast_fixinc != xyes; then
fixincludes=fixincludes
else fixincludes=fixinc.sh ; fi
# Set this to control how the header file directory is installed.
rest=`echo $machine | sed -e "s/$cpu_type-//"`
xm_file=${cpu_type}/xm-$rest.h
tm_file=${cpu_type}/$rest.h
- if [ -f $srcdir/config/${cpu_type}/x-$rest ] ; \
+ if test -f $srcdir/config/${cpu_type}/x-$rest; \
then xmake_file=${cpu_type}/x-$rest; \
else true; \
fi
- if [ -f $srcdir/config/${cpu_type}/t-$rest ] ; \
+ if test -f $srcdir/config/${cpu_type}/t-$rest; \
then tmake_file=${cpu_type}/t-$rest; \
else true; \
fi
fixincludes=fixinc.wrap
xmake_file=none
gas=yes gnu_ld=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
xmake_file=none
fixincludes=Makefile.in
gas=yes gnu_ld=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
;;
alpha*-dec-osf*)
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
- if [ x$gas != xyes ]
+ if test x$gas != xyes
then
extra_passes="mips-tfile mips-tdump"
fi
extra_host_objs=oldnames.o
extra_gcc_objs="spawnv.o oldnames.o"
fixincludes=fixinc.winnt
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
extra_programs=ld.exe
fi
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
;;
use_collect2=yes
;;
arm-*-riscix*) # Acorn RISC machine
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=arm/rix-gas.h
else
tm_file="pa/pa-oldas.h ${tm_file} pa/pa-hpux7.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
else
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
else
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
tmake_file=pa/t-pa
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
- if [ x$enable_threads = x ]; then
+ if test x$enable_threads = x; then
enable_threads=$have_pthread_h
fi
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='dce'
tmake_file="${tmake_file} pa/t-dce-thr"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
- if [ x$enable_threads = x ]; then
+ if test x$enable_threads = x; then
enable_threads=$have_pthread_h
fi
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='dce'
tmake_file="${tmake_file} pa/t-dce-thr"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
i370-*-mvs*)
;;
i[34567]86-ibm-aix*) # IBM PS/2 running AIX
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=i386/aix386.h
extra_parts="crtbegin.o crtend.o"
xm_defines=USG
xmake_file=i386/x-aix
;;
- i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
+ i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
xmake_file=i386/x-ncr3000
- if [ x$stabs = xyes -a x$gas = xyes ]
+ if test x$stabs = xyes -a x$gas = xyes
then
tm_file=i386/sysv4gdb.h
else
tmake_file=i386/t-next
xmake_file=i386/x-next
extra_objs=nextstep.o
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='mach'
fi
;;
i[34567]86-sequent-bsd*) # 80386 from Sequent
use_collect2=yes
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=i386/seq-gas.h
else
xmake_file=i386/x-isc
;;
esac
- if [ x$gas = xyes -a x$stabs = xyes ]
+ if test x$gas = xyes -a x$stabs = xyes
then
tm_file=i386/iscdbx.h
tmake_file=i386/t-svr3dbx
install_headers_dir=install-headers-cpio
;;
i[34567]86-*-linux-gnuoldld*) # Intel 80386's running GNU/Linux
- # with a.out format using
# pre BFD linkers
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
float_format=i386
;;
i[34567]86-*-linux-gnuaout*) # Intel 80386's running GNU/Linux
- # with a.out format
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
tm_file=i386/linux-aout.h
float_format=i386
;;
i[34567]86-*-linux-gnulibc1) # Intel 80386's running GNU/Linux
- # with ELF format using the
# GNU/Linux C library 5
xmake_file=x-linux
tm_file=i386/linux.h
fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='single'
fi
;;
i[34567]86-*-linux-gnu*) # Intel 80386's running GNU/Linux
- # with ELF format using glibc 2
# aka GNU/Linux C library 6
xmake_file=x-linux
tm_file=i386/linux.h
fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
gas=yes
;;
i[34567]86-*-lynxos*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=i386/lynx.h
else
use_collect2=yes
;;
i[34567]86-*-osfrose*) # 386 using OSF/rose
- if [ x$elf = xyes ]
+ if test x$elf = xyes
then
tm_file=i386/osfelf.h
use_collect2=
fixincludes=fixinc.sco
install_headers_dir=install-headers-cpio
tm_file=i386/sco5.h
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="i386/sco5gas.h ${tm_file}"
tmake_file=i386/t-sco5gas
xmake_file=i386/x-sco4
fixincludes=fixinc.sco
install_headers_dir=install-headers-cpio
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=i386/sco4dbx.h
tmake_file=i386/t-svr3dbx
xm_file=i386/xm-sco.h
xmake_file=i386/x-sco
install_headers_dir=install-headers-cpio
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=i386/scodbx.h
tmake_file=i386/t-svr3dbx
i[34567]86-*-solaris2*)
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=i386/sol2dbg.h
else
*)
fixincludes=fixinc.wrap;;
esac
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='solaris'
fi
;;
xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
xm_defines="USG POSIX"
tm_file=i386/sysv4.h
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
tm_file=i386/sysv4.h
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h i386/xm-osf1elf.h"
xm_defines="USE_C_ALLOCA SMALL_ARG_MAX"
fixincludes=Makefile.in #Don't do it on OSF/1
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=i386/osf1elfgdb.h
else
i[34567]86-*-sysv*) # Intel 80386's running system V
xm_defines="USG SVR3"
xmake_file=i386/x-sysv3
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=i386/svr3dbx.h
tmake_file=i386/t-svr3dbx
xmake_file=i386/x-cygwin32
extra_objs=winnt.o
fixincludes=Makefile.in
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
xmake_file=i386/x-cygwin32
extra_objs=winnt.o
fixincludes=Makefile.in
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
extra_objs=winnt.o
xmake_file=i386/x-cygwin32
fixincludes=Makefile.in
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
extra_host_objs="winnt.o oldnames.o"
extra_gcc_objs="spawnv.o oldnames.o"
fixincludes=fixinc.winnt
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
extra_programs=ld.exe
fi
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
;;
;;
i860-*-bsd*)
tm_file="${tm_file} i860/bsd.h"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} i860/bsd-gas.h"
fi
m68000-hp-hpux*) # HP 9000 series 300
xm_file="xm_alloca.h ${xm_file}"
xm_defines="USG NO_SYS_SIGLIST"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
tm_file=m68k/hp310g.h
m68000-att-sysv*)
xm_file="m68k/xm-3b1.h ${xm_file}"
xm_defines=USG
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=m68k/3b1g.h
else
extra_headers=math-68881.h
extra_parts="crt1.o mcrt1.o maccrt1.o crt2.o crtn.o"
tm_file=
- if [ "$gnu_ld" = yes ]
+ if test "$gnu_ld" = yes
then
tm_file="${tm_file} m68k/auxgld.h"
else
tm_file="${tm_file} m68k/auxld.h"
fi
- if [ "$gas" = yes ]
+ if test "$gas" = yes
then
tm_file="${tm_file} m68k/auxgas.h"
else
float_format=m68k
;;
m68k-altos-sysv*) # Altos 3068
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=m68k/altos3068.h
xm_defines=USG
extra_headers=math-68881.h
;;
m68k-bull-sysv*) # Bull DPX/2
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=m68k/dpx2cdbx.h
else
tm_file=m68k/mot3300.h
xm_file="xm-alloca.h m68k/xm-mot3300.h ${xm_file}"
xm_defines=NO_SYS_SIGLIST
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
xmake_file=m68k/x-mot3300-gas
- if [ x$gnu_ld = xyes ]
+ if test x$gnu_ld = xyes
then
tmake_file=m68k/t-mot3300-gald
else
fi
else
xmake_file=m68k/x-mot3300
- if [ x$gnu_ld = xyes ]
+ if test x$gnu_ld = xyes
then
tmake_file=m68k/t-mot3300-gld
else
float_format=m68k
;;
m68k-isi-bsd*)
- if [ x$with_fp = xno ]
+ if test x$with_fp = xno
then
tm_file=m68k/isi-nfp.h
else
m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
xm_file="xm_alloca.h ${xm_file}"
xm_defines="USG NO_SYS_SIGLIST"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
tm_file=m68k/hp320g.h
m68k-hp-hpux*) # HP 9000 series 300
xm_file="xm_alloca.h ${xm_file}"
xm_defines="USG NO_SYS_SIGLIST"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
tm_file=m68k/hp320g.h
float_format=m68k
;;
m68k-sony-newsos3*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=m68k/news3gas.h
else
float_format=m68k
;;
m68k-sony-bsd* | m68k-sony-newsos*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=m68k/newsgas.h
else
extra_objs=nextstep.o
extra_headers=math-68881.h
float_format=m68k
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='mach'
fi
;;
m68k-sun-sunos3*)
- if [ x$with_fp = xno ]
+ if test x$with_fp = xno
then
tm_file=m68k/sun3n3.h
else
extra_headers=math-68881.h
;;
m68k-sun-sunos*) # For SunOS 4 (the default).
- if [ x$with_fp = xno ]
+ if test x$with_fp = xno
then
tm_file=m68k/sun3n.h
else
float_format=m68k
;;
m68k-*-lynxos*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=m68k/lynx.h
else
extra_headers=math-68881.h
float_format=m68k
gnu_ld=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
esac
extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
xmake_file=m88k/x-dgux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=m88k/t-dgux-gas
fi
extra_parts="crtbegin.o crtend.o"
xm_file="m88k/xm-sysv3.h ${xm_file}"
xmake_file=m88k/x-dolph
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=m88k/t-m88k-gas
fi
extra_parts="crtbegin.o crtend.o"
xm_file="m88k/xm-sysv3.h ${xm_file}"
xmake_file=m88k/x-tekXD88
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=m88k/t-m88k-gas
fi
m88k-*-luna*)
tm_file=m88k/luna.h
extra_parts="crtbegin.o crtend.o"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=m88k/t-luna-gas
else
extra_parts="crtbegin.o crtend.o"
xm_file="m88k/xm-sysv3.h ${xm_file}"
xmake_file=m88k/x-sysv3
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=m88k/t-m88k-gas
fi
fixincludes=fixinc.irix
xmake_file=mips/x-iris6
tmake_file=mips/t-iris6
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
tmake_file=mips/t-cross64
# See comment in mips/iris[56].h files.
use_collect2=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sni-sysv4)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file=mips/iris5gdb.h
else
xm_defines=USG
xmake_file=mips/x-sni-svr4
tmake_file=mips/t-mips-gas
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-sgi-irix5*) # SGI System V.4., IRIX 5
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="mips/iris5.h mips/iris5gas.h"
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-mips-gas
# See comment in mips/iris5.h file.
use_collect2=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sgi-irix4loser*) # Mostly like a MIPS.
tm_file="mips/iris4loser.h mips/iris3.h ${tm_file} mips/iris4.h"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-iris
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sgi-irix4*) # Mostly like a MIPS.
tm_file="mips/iris3.h ${tm_file} mips/iris4.h"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-iris
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sgi-*) # Mostly like a MIPS.
tm_file="mips/iris3.h ${tm_file}"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-iris3
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-dec-osf*) # Decstation running OSF/1 as shipped by DIGITAL
tm_file=mips/dec-osf1.h
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xmake_file=mips/x-dec-osf1
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
mips-dec-bsd*) # Decstation running 4.4 BSD
tm_file=mips/dec-bsd.h
fixincludes=
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-sony-bsd* | mips-sony-newsos*) # Sony NEWS 3600 or risc/news.
tm_file="mips/news4.h ${tm_file}"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
# That is based on svr4.
# t-svr4 is not right because this system doesn't use ELF.
tm_file="mips/news5.h ${tm_file}"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h ${xm_file}"
xm_defines=USG
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-tandem-sysv4*) # Tandem S2 running NonStop UX
tm_file="mips/svr4-5.h mips/svr4-t.h"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h ${xm_file}"
xm_defines=USG
xmake_file=mips/x-sysv
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
extra_parts="crtbegin.o crtend.o"
tmake_file=mips/t-mips
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-ultrix* | mips-dec-mach3) # Decstation.
tm_file="mips/ultrix.h ${tm_file}"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xmake_file=mips/x-ultrix
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-riscos[56789]bsd*)
tm_file=mips/bsd-5.h # MIPS BSD 4.3, RISC-OS 5.0
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-bsd-gas
else
tmake_file=mips/t-bsd
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[1234]bsd*)
tm_file="mips/bsd-4.h ${tm_file}" # MIPS BSD 4.3, RISC-OS 4.0
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-bsd-gas
else
tmake_file=mips/t-bsd
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-riscos[56789]sysv4*)
tm_file=mips/svr4-5.h # MIPS System V.4., RISC-OS 5.0
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h ${xm_file}"
xmake_file=mips/x-sysv
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr4-gas
else
tmake_file=mips/t-svr4
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-sysv4* | mips-*-riscos[1234]sysv4* | mips-*-riscossysv4*)
tm_file="mips/svr4-4.h ${tm_file}"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-sysv
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr4-gas
else
tmake_file=mips/t-svr4
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-riscos[56789]sysv*)
tm_file=mips/svr3-5.h # MIPS System V.3, RISC-OS 5.0
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-sysv
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr3-gas
else
tmake_file=mips/t-svr3
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-sysv* | mips-*-riscos*sysv*)
tm_file="mips/svr3-4.h ${tm_file}"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-sysv
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr3-gas
else
tmake_file=mips/t-svr3
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-riscos[56789]*) # Default MIPS RISC-OS 5.0.
tm_file=mips/mips-5.h
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mipsel-*-ecoff*)
tm_file=mips/ecoffl.h
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-ecoff
;;
mips-*-ecoff*)
tm_file="gofast.h mips/ecoff.h"
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-ecoff
use_collect2=yes
;;
mips-*-*) # Default MIPS RISC-OS 4.0.
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [ x$gnu_ld != xyes ]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
mn10200-*-*)
cpu_type=mn10200
tm_file="mn10200/mn10200.h"
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
mn10300-*-*)
cpu_type=mn10300
tm_file="mn10300/mn10300.h"
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
extra_headers=ppc-asm.h
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
else
;;
powerpc-*-eabi*)
tm_file=rs6000/eabi.h
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
else
;;
powerpc-*-rtems*)
tm_file=rs6000/rtems.h
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
else
tm_file=rs6000/linux.h
xm_file=rs6000/xm-sysv4.h
out_file=rs6000/rs6000.c
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
else
fixincludes=Makefile.in
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG ${xm_defines}"
out_file=rs6000/rs6000.c
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
else
fixincludes=Makefile.in
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
tm_file=rs6000/sysv4le.h
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
else
;;
powerpcle-*-eabi*)
tm_file=rs6000/eabile.h
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
else
tmake_file=rs6000/t-winnt
# extra_objs=pe.o
fixincludes=Makefile.in
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
extra_headers=ppc-asm.h
xmake_file=rs6000/x-cygwin32
# extra_objs=pe.o
fixincludes=Makefile.in
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
tm_file=rs6000/sol2.h
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
else
;;
rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
tm_file=rs6000/aix3newas.h
- if [ x$host != x$target ]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xnewas
else
;;
rs6000-ibm-aix4.[12].* | powerpc-ibm-aix4.[12].*)
tm_file=rs6000/aix41.h
- if [ x$host != x$target ]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xnewas
else
;;
rs6000-ibm-aix4.[3456789].* | powerpc-ibm-aix4.[3456789].*)
tm_file=rs6000/aix43.h
- if [ x$host != x$target ]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xaix43
else
;;
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
tm_file=rs6000/aix43.h
- if [ x$host != x$target ]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xaix43
else
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
sparc-*-lynxos*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file=sparc/lynx.h
else
tm_file=sparc/rtems.h
;;
sparc-*-solaris2*)
- if [ x$gnu_ld = xyes ]
+ if test x$gnu_ld = xyes
then
tm_file=sparc/sol2.h
else
fixincludes=fixinc.wrap;;
esac
float_format=i128
- if [ x${enable_threads} = x ]; then
+ if test x${enable_threads} = x; then
enable_threads=$have_pthread_h
- if [ x${enable_threads} = x ]; then
+ if test x${enable_threads} = x; then
enable_threads=$have_thread_h
fi
fi
- if [ x${enable_threads} = xyes ]; then
- if [ x${have_pthread_h} = xyes ]; then
+ if test x${enable_threads} = xyes; then
+ if test x${have_pthread_h} = xyes; then
thread_file='posix'
else
thread_file='solaris'
tm_file=sparc/sunos4.h
tmake_file=sparc/t-sunos41
use_collect2=yes
- if [ x$gas = xyes ]; then
+ if test x$gas = xyes; then
tm_file="${tm_file} sparc/sun4gas.h"
fi
;;
tm_file="v850/v850.h"
xm_file="v850/xm-v850.h"
tmake_file=v850/t-v850
- if [ x$stabs = xyes ]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
;;
esac
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
- if [ "$target_cpu_default2" = "" ]
+ if test "$target_cpu_default2" = ""
then
target_cpu_default2="MASK_GAS"
else
;;
*)
- if [ x$pass2done = xyes ]
+ if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
;;
mips*-*-ecoff* | mips*-*-elf*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
- if [ x$gnu_ld = xyes ]
+ if test x$gnu_ld = xyes
then
target_cpu_default2=20
else
fi
;;
mips*-*-*)
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
target_cpu_default2=16
fi
;;
*)
- if [ x$pass2done = xyes ]
+ if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
*)
- if [ x$pass2done = xyes ]
+ if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
;;
esac
- if [ "$target_cpu_default2" != "" ]
+ if test "$target_cpu_default2" != ""
then
- if [ "$target_cpu_default" != "" ]
+ if test "$target_cpu_default" != ""
then
target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
else
# Save data on machine being used to compile GCC in build_xm_file.
# Save data on host machine in vars host_xm_file and host_xmake_file.
- if [ x$pass1done = x ]
+ if test x$pass1done = x
then
- if [ x"$xm_file" = x ]
+ if test x"$xm_file" = x
then build_xm_file=$cpu_type/xm-$cpu_type.h
else build_xm_file=$xm_file
fi
build_exeext=$exeext
pass1done=yes
else
- if [ x$pass2done = x ]
+ if test x$pass2done = x
then
- if [ x"$xm_file" = x ]
+ if test x"$xm_file" = x
then host_xm_file=$cpu_type/xm-$cpu_type.h
else host_xm_file=$xm_file
fi
host_xm_defines=$xm_defines
- if [ x"$xmake_file" = x ]
+ if test x"$xmake_file" = x
then xmake_file=$cpu_type/x-$cpu_type
fi
host_xmake_file="$xmake_file"
extra_objs="${host_extra_objs} ${extra_objs}"
# Default the target-machine variables that were not explicitly set.
-if [ x"$tm_file" = x ]
+if test x"$tm_file" = x
then tm_file=$cpu_type/$cpu_type.h; fi
-if [ x$extra_headers = x ]
+if test x$extra_headers = x
then extra_headers=; fi
-if [ x"$xm_file" = x ]
+if test x"$xm_file" = x
then xm_file=$cpu_type/xm-$cpu_type.h; fi
-if [ x$md_file = x ]
+if test x$md_file = x
then md_file=$cpu_type/$cpu_type.md; fi
-if [ x$out_file = x ]
+if test x$out_file = x
then out_file=$cpu_type/$cpu_type.c; fi
-if [ x"$tmake_file" = x ]
+if test x"$tmake_file" = x
then tmake_file=$cpu_type/t-$cpu_type
fi
-if [ x$float_format = x ]
+if test x$float_format = x
then float_format=i64
fi
-if [ x$enable_haifa = x ]
+if test x$enable_haifa = x
then
case $target in
alpha*-* | hppa1.?-* | powerpc*-* | rs6000-* | *sparc*-* | m32r*-*)
for f in $tm_file; do
count=${count}x
done
-if [ $count = ax ]; then
+if test $count = ax; then
echo "Using \`$srcdir/config/$tm_file' as target machine macro file."
else
echo "Using the following target machine macro files:"
for f in $host_xm_file; do
count=${count}x
done
-if [ $count = ax ]; then
+if test $count = ax; then
echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file."
else
echo "Using the following host machine macro files:"
done
fi
-if [ "$host_xm_file" != "$build_xm_file" ]; then
+if test "$host_xm_file" != "$build_xm_file"; then
count=a
for f in $build_xm_file; do
count=${count}x
done
- if [ $count = ax ]; then
+ if test $count = ax; then
echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file."
else
echo "Using the following build machine macro files:"
fi
fi
-if [ x$thread_file = x ]; then
- if [ x$target_thread_file != x ]; then
+if test x$thread_file = x; then
+ if test x$target_thread_file != x; then
thread_file=$target_thread_file
else
thread_file='single'
# If host=build, it is correct to have hconfig include auto-host.h
# as well. If host!=build, we are in error and need to do more
# work to find out the build config parameters.
-if [ x$host = x$build ]
+if test x$host = x$build
then
build_xm_file="auto-host.h ${build_xm_file}"
else
defines="host_xm_defines null_defines xm_defines build_xm_defines"
rm -f config.bak
-if [ -f config.status ]; then mv -f config.status config.bak; fi
+if test -f config.status; then mv -f config.status config.bak; fi
# Make the links.
-while [ -n "$vars" ]
+while test -n "$vars"
do
set $vars; var=$1; shift; vars=$*
set $links; link=$1; shift; links=$*
# Define TARGET_CPU_DEFAULT if the system wants one.
# This substitutes for lots of *.h files.
- if [ "$target_cpu_default" != "" -a $link = tm.h ]
+ if test "$target_cpu_default" != "" -a $link = tm.h
then
echo "#define TARGET_CPU_DEFAULT ($target_cpu_default)" >>$link
fi
done
# Truncate the target if necessary
-if [ x$host_truncate_target != x ]; then
+if test x$host_truncate_target != x; then
target=`echo $target | sed -e 's/\(..............\).*/\1/'`
fi
# Get the version trigger filename from the toplevel
-if [ "${with_gcc_version_trigger+set}" = set ]; then
+if test "${with_gcc_version_trigger+set}" = set; then
gcc_version_trigger=$with_gcc_version_trigger
else
gcc_version_trigger=${srcdir}/version.c
dep_host_xmake_file=
for f in .. ${host_xmake_file}
do
- if [ -f ${srcdir}/config/$f ]
+ if test -f ${srcdir}/config/$f
then
dep_host_xmake_file="${dep_host_xmake_file} ${srcdir}/config/$f"
fi
dep_tmake_file=
for f in .. ${tmake_file}
do
- if [ -f ${srcdir}/config/$f ]
+ if test -f ${srcdir}/config/$f
then
dep_tmake_file="${dep_tmake_file} ${srcdir}/config/$f"
fi
# Also use all.cross instead of all.internal
# and add cross-make to Makefile.
cross_overrides="/dev/null"
-if [ x$host != x$target ]
+if test x$host != x$target
then
cross_defines="CROSS=-DCROSS_COMPILE"
cross_overrides="${topdir}/cross-make"
# This must come after cross-make as we want all.build to override
# all.cross.
build_overrides="/dev/null"
-if [ x$build != x$host ]
+if test x$build != x$host
then
build_overrides="${topdir}/build-make"
fi
# Expand extra_headers to include complete path.
# This substitutes for lots of t-* files.
extra_headers_list=
-if [ "x$extra_headers" = x ]
+if test "x$extra_headers" = x
then true
else
# Prepend ${srcdir}/ginclude/ to every entry in extra_headers.
done
fi
-if [ x$use_collect2 = xno ]; then
+if test x$use_collect2 = xno; then
use_collect2=
fi
# Add a definition of USE_COLLECT2 if system wants one.
# Also tell toplev.c what to do.
# This substitutes for lots of t-* files.
-if [ x$use_collect2 = x ]
+if test x$use_collect2 = x
then
will_use_collect2=
maybe_use_collect2=
# building gcc with a cross compiler, use the cross compiler just
# built. Otherwise, we can use the cpp just built.
md_file_sub=
-if [ "x$md_cppflags" = x ]
+if test "x$md_cppflags" = x
then
md_file_sub=$srcdir/config/$md_file
else
fi
# If we have gas in the build tree, make a link to it.
-if [ -f ../gas/Makefile ]; then
+if test -f ../gas/Makefile; then
rm -f as; $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
fi
# If we have nm in the build tree, make a link to it.
-if [ -f ../binutils/Makefile ]; then
+if test -f ../binutils/Makefile; then
rm -f nm; $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
fi
# If we have ld in the build tree, make a link to it.
-if [ -f ../ld/Makefile ]; then
-# if [[ x$use_collect2 = x ]]; then
+if test -f ../ld/Makefile; then
+# if test x$use_collect2 = x; then
# rm -f ld; $symbolic_link ../ld/ld-new$host_exeext ld$host_exeext 2>/dev/null
# else
rm -f collect-ld; $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext 2>/dev/null
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:5364: checking assembler alignment features" >&5
+echo "configure:5360: checking assembler alignment features" >&5
gcc_cv_as=
gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,gcc$,gas,'`
-if [ -x as$host_exeext ]; then
+if test -x as$host_exeext; then
# Build using assembler in the current directory.
gcc_cv_as=./as$host_exeext
-elif [ -f $gcc_cv_as_gas_srcdir/configure.in ]; then
+elif test -f $gcc_cv_as_gas_srcdir/configure.in; then
# Single tree build which includes gas.
for f in $gcc_cv_as_gas_srcdir/configure $gcc_cv_as_gas_srcdir/configure.in $gcc_cv_as_gas_srcdir/Makefile.in
do
gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
- if [ x$gcc_cv_gas_version != x ]; then
+ if test x$gcc_cv_gas_version != x; then
break
fi
done
gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- if [ x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x ]; then
+ if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
# Gas version 2.6 and later support for .balign and .p2align.
# bytes to skip when using .p2align.
- if [ "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2 ]; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
gcc_cv_as_alignment_features=".balign and .p2align"
cat >> confdefs.h <<\EOF
#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
fi
# Gas version 2.8 and later support specifying the maximum
# bytes to skip when using .p2align.
- if [ "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2 ]; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
gcc_cv_as_alignment_features=".p2align including maximum skip"
cat >> confdefs.h <<\EOF
#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
fi
fi
-elif [ x$host = x$target ]; then
+elif test x$host = x$target; then
# Native build.
gcc_cv_as=as$host_exeext
fi
-if [ x$gcc_cv_as != x ]; then
+if test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo ".balign 4" > conftest.s
echo ".p2align 2" >> conftest.s
# Make gthr-default.h if we have a thread file.
gthread_flags=
-if [ $thread_file != single ]; then
+if test $thread_file != single; then
rm -f gthr-default.h
echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h
gthread_flags=-DHAVE_GTHR_DEFAULT
touch specs.h options.h
for subdir in . $subdirs
do
- if [ -f $srcdir/$subdir/lang-specs.h ]; then
+ if test -f $srcdir/$subdir/lang-specs.h; then
echo "#include \"$subdir/lang-specs.h\"" >>specs.h
lang_specs_files="$lang_specs_files $srcdir/$subdir/lang-specs.h"
fi
- if [ -f $srcdir/$subdir/lang-options.h ]; then
+ if test -f $srcdir/$subdir/lang-options.h; then
echo "#include \"$subdir/lang-options.h\"" >>options.h
lang_options_files="$lang_options_files $srcdir/$subdir/lang-options.h"
fi
for s in .. $subdirs
do
- if [ $s != ".." ]
+ if test $s != ".."
then
language=
boot_language=
outputs=
lib2funcs=
. ${srcdir}/$s/config-lang.in
- if [ "x$language" = x ]
+ if test "x$language" = x
then
echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2
exit 1
fi
all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in ${srcdir}/$s/Makefile.in"
all_languages="$all_languages $language"
- if [ "x$boot_language" = xyes ]
+ if test "x$boot_language" = xyes
then
all_boot_languages="$all_boot_languages $language"
fi
all_diff_excludes="$all_diff_excludes $diff_excludes"
all_headers="$all_headers $headers"
all_outputs="$all_outputs $outputs"
- if [ x$outputs = x ]
+ if test x$outputs = x
then
oldstyle_subdirs="$oldstyle_subdirs $s"
fi
x=
for l in .. $all_languages
do
- if [ $l != ".." ]; then
+ if test $l != ".."; then
x="$x $l.$t"
fi
done
# If we're not building in srcdir, create .gdbinit.
-if [ ! -f Makefile.in ]; then
+if test ! -f Makefile.in; then
echo "dir ." > .gdbinit
echo "dir ${srcdir}" >> .gdbinit
- if [ x$gdb_needs_out_file_path = xyes ]
+ if test x$gdb_needs_out_file_path = xyes
then
echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
fi
- if [ "x$subdirs" != x ]; then
+ if test "x$subdirs" != x; then
for s in $subdirs
do
echo "dir ${srcdir}/$s" >> .gdbinit
build_canonical=${build}
host_canonical=${host}
target_subdir=
-if [ "${host}" != "${target}" ] ; then
+if test "${host}" != "${target}" ; then
target_subdir=${target}/
fi
# libgcc.a, but that's OK because newib should have its own version of
# assert.h.
inhibit_libc=
-if [ x$with_newlib = xyes ]; then
+if test x$with_newlib = xyes; then
inhibit_libc=-Dinhibit_libc
fi
# Override SCHED_OBJ and SCHED_CFLAGS to enable the Haifa scheduler.
sched_prefix=
sched_cflags=
-if [ x$enable_haifa = xyes ]; then
+if test x$enable_haifa = xyes; then
echo "Using the Haifa scheduler."
sched_prefix=haifa-
sched_cflags=-DHAIFA
fi
-if [ x$enable_haifa != x ]; then
+if test x$enable_haifa != x; then
# Explicitly remove files that need to be recompiled for the Haifa scheduler.
for x in genattrtab.o toplev.o loop.o unroll.o *sched.o; do
- if [ -f $x ]; then
+ if test -f $x; then
echo "Removing $x"
rm -f $x
fi
# Warn if using init_priority.
echo $ac_n "checking whether to enable init_priority by default""... $ac_c" 1>&6
-echo "configure:5619: checking whether to enable init_priority by default" >&5
-if [ x$enable_init_priority != xyes ]; then
+echo "configure:5615: checking whether to enable init_priority by default" >&5
+if test x$enable_init_priority != xyes; then
enable_init_priority=no
fi
echo "$ac_t""$enable_init_priority" 1>&6
# Echo that links are built
-if [ x$host = x$target ]
+if test x$host = x$target
then
str1="native "
else
str2=" from $host"
fi
-if [ x$host != x$build ]
+if test x$host != x$build
then
str3=" on a $build system"
fi
-if [ "x$str2" != x ] || [ "x$str3" != x ]
+if test "x$str2" != x || test "x$str3" != x
then
str4=
fi
echo "Links are now set up to build a ${str1}compiler for ${target}$str4" 1>&2
-if [ "x$str2" != x ] || [ "x$str3" != x ]
+if test "x$str2" != x || test "x$str3" != x
then
echo " ${str2}${str3}." 1>&2
fi
# Truncate the target if necessary
-if [ x$host_truncate_target != x ]; then
+if test x$host_truncate_target != x; then
target=`echo $target | sed -e 's/\(..............\).*/\1/'`
fi
# FLAGS_TO_PASS has been modified to solve the problem there.
# This is virtually a duplicate of what happens in configure.lang; we do
# an extra check to make sure this only happens if ln -s can be used.
-if [ "$symbolic_link" = "ln -s" ]; then
+if test "$symbolic_link" = "ln -s"; then
for d in .. ${subdirs} ; do
- if [ $d != .. ]; then
+ if test $d != ..; then
STARTDIR=`pwd`
cd $d
for t in stage1 stage2 stage3 stage4 include
esac])
# Default local prefix if it is empty
-if [[ x$local_prefix = x ]]; then
+if test x$local_prefix = x; then
local_prefix=/usr/local
fi
cpp_main=cccp
AC_ARG_ENABLE(c-cpplib,
[ --enable-c-cpplib Use cpplib for C and C++.],
-if [[[ x$enable_c_cpplib != xno ]]]; then
+if test x$enable_c_cpplib != xno; then
extra_c_objs="${extra_c_objs} cpplib.o cppexp.o cpphash.o cpperror.o"
extra_c_objs="${extra_c_objs} prefix.o"
extra_cxx_objs="${extra_cxx_objs} ../cpplib.o ../cppexp.o ../cpphash.o ../cpperror.o ../prefix.o"
# Enable Multibyte Characters for C/C++
AC_ARG_ENABLE(c-mbchar,
[ --enable-c-mbchar Enable multibyte characters for C and C++.],
-if [[[ x$enable_c_mbchar != xno ]]]; then
+if test x$enable_c_mbchar != xno; then
extra_c_flags=-DMULTIBYTE_CHARS=1
fi)
for static objects.
--disable-init-priority Conform to ISO C++ rules for ordering static objects
(i.e. initialized in order of declaration). ],
-if [[[ x$enable_init_priority != xno ]]]; then
+if test x$enable_init_priority != xno; then
extra_c_flags=-DUSE_INIT_PRIORITY
fi)
AC_ARG_ENABLE(threads,
[ --enable-threads enable thread usage for target GCC.
--enable-threads=LIB use LIB thread package for target GCC.],
-if [[[ x$enable_threads = xno ]]]; then
+if test x$enable_threads = xno; then
enable_threads=''
fi,
enable_threads='')
# Set this to override the default target model.
target_cpu_default=
# Set this to control which fixincludes program to use.
- if [[ x$fast_fixinc != xyes ]] ; then
+ if test x$fast_fixinc != xyes; then
fixincludes=fixincludes
else fixincludes=fixinc.sh ; fi
# Set this to control how the header file directory is installed.
c*-convex-*)
cpu_type=convex
;;
- i[[34567]]86-*-*)
+changequote(,)dnl
+ i[34567]86-*-*)
+changequote([,])dnl
cpu_type=i386
;;
hppa*-*-*)
rest=`echo $machine | sed -e "s/$cpu_type-//"`
xm_file=${cpu_type}/xm-$rest.h
tm_file=${cpu_type}/$rest.h
- if [[ -f $srcdir/config/${cpu_type}/x-$rest ]] ; \
+ if test -f $srcdir/config/${cpu_type}/x-$rest; \
then xmake_file=${cpu_type}/x-$rest; \
else true; \
fi
- if [[ -f $srcdir/config/${cpu_type}/t-$rest ]] ; \
+ if test -f $srcdir/config/${cpu_type}/t-$rest; \
then tmake_file=${cpu_type}/t-$rest; \
else true; \
fi
fixincludes=fixinc.wrap
xmake_file=none
gas=yes gnu_ld=yes
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
xmake_file=none
fixincludes=Makefile.in
gas=yes gnu_ld=yes
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
;;
alpha*-dec-osf*)
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
- if [[ x$gas != xyes ]]
+ if test x$gas != xyes
then
extra_passes="mips-tfile mips-tdump"
fi
*-*-osf1*)
tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
;;
- *-*-osf[[23]]*)
+changequote(,)dnl
+ *-*-osf[23]*)
+changequote([,])dnl
tm_file="${tm_file} alpha/osf.h alpha/osf2or3.h"
;;
*-*-osf4*)
;;
esac
case $machine in
- *-*-osf4.0[[b-z]] | *-*-osf4.[[1-9]]*)
+changequote(,)dnl
+ *-*-osf4.0[b-z] | *-*-osf4.[1-9]*)
+changequote([,])dnl
target_cpu_default=MASK_SUPPORT_ARCH
;;
esac
extra_host_objs=oldnames.o
extra_gcc_objs="spawnv.o oldnames.o"
fixincludes=fixinc.winnt
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
extra_programs=ld.exe
fi
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
;;
tm_file=arm/coff.h
tmake_file=arm/t-bare
;;
- arm-*-riscix1.[[01]]*) # Acorn RISC machine (early versions)
+changequote(,)dnl
+ arm-*-riscix1.[01]*) # Acorn RISC machine (early versions)
+changequote([,])dnl
tm_file=arm/riscix1-1.h
use_collect2=yes
;;
arm-*-riscix*) # Acorn RISC machine
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=arm/rix-gas.h
else
tm_file="pa/pa-oldas.h ${tm_file} pa/pa-hpux7.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/gas.h"
fi
install_headers_dir=install-headers-cpio
use_collect2=yes
;;
- hppa1.0-*-hpux8.0[[0-2]]*)
+changequote(,)dnl
+ hppa1.0-*-hpux8.0[0-2]*)
+changequote([,])dnl
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
else
install_headers_dir=install-headers-cpio
use_collect2=yes
;;
- hppa1.1-*-hpux8.0[[0-2]]*)
+changequote(,)dnl
+ hppa1.1-*-hpux8.0[0-2]*)
+changequote([,])dnl
target_cpu_default=1
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
else
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
tmake_file=pa/t-pa
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
- if [[ x$enable_threads = x ]]; then
+ if test x$enable_threads = x; then
enable_threads=$have_pthread_h
fi
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='dce'
tmake_file="${tmake_file} pa/t-dce-thr"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
- if [[ x$enable_threads = x ]]; then
+ if test x$enable_threads = x; then
enable_threads=$have_pthread_h
fi
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='dce'
tmake_file="${tmake_file} pa/t-dce-thr"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
;;
i370-*-mvs*)
;;
- i[[34567]]86-ibm-aix*) # IBM PS/2 running AIX
- if [[ x$gas = xyes ]]
+changequote(,)dnl
+ i[34567]86-ibm-aix*) # IBM PS/2 running AIX
+changequote([,])dnl
+ if test x$gas = xyes
then
tm_file=i386/aix386.h
extra_parts="crtbegin.o crtend.o"
xm_defines=USG
xmake_file=i386/x-aix
;;
- i[[34567]]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
+changequote(,)dnl
+ i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
+changequote([,])dnl
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
xmake_file=i386/x-ncr3000
- if [[ x$stabs = xyes -a x$gas = xyes ]]
+ if test x$stabs = xyes -a x$gas = xyes
then
tm_file=i386/sysv4gdb.h
else
extra_parts="crtbegin.o crtend.o"
tmake_file=i386/t-crtpic
;;
- i[[34567]]86-next-*)
+changequote(,)dnl
+ i[34567]86-next-*)
+changequote([,])dnl
tm_file=i386/next.h
xm_file=i386/xm-next.h
tmake_file=i386/t-next
xmake_file=i386/x-next
extra_objs=nextstep.o
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='mach'
fi
;;
- i[[34567]]86-sequent-bsd*) # 80386 from Sequent
+changequote(,)dnl
+ i[34567]86-sequent-bsd*) # 80386 from Sequent
+changequote([,])dnl
use_collect2=yes
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=i386/seq-gas.h
else
tm_file=i386/sequent.h
fi
;;
- i[[34567]]86-sequent-ptx1*)
+changequote(,)dnl
+ i[34567]86-sequent-ptx1*)
+changequote([,])dnl
xm_defines="USG SVR3"
xmake_file=i386/x-sysv3
tm_file=i386/seq-sysv3.h
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
;;
- i[[34567]]86-sequent-ptx2* | i[[34567]]86-sequent-sysv3*)
+changequote(,)dnl
+ i[34567]86-sequent-ptx2* | i[34567]86-sequent-sysv3*)
+changequote([,])dnl
xm_defines="USG SVR3"
xmake_file=i386/x-sysv3
tm_file=i386/seq2-sysv3.h
fixincludes=fixinc.ptx
install_headers_dir=install-headers-cpio
;;
- i[[34567]]86-sequent-ptx4* | i[[34567]]86-sequent-sysv4*)
+changequote(,)dnl
+ i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
+changequote([,])dnl
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
xmake_file=x-svr4
tm_file=i386/sun.h
use_collect2=yes
;;
- i[[34567]]86-wrs-vxworks*)
+changequote(,)dnl
+ i[34567]86-wrs-vxworks*)
+changequote([,])dnl
tm_file=i386/vxi386.h
tmake_file=i386/t-i386bare
;;
- i[[34567]]86-*-aout*)
+changequote(,)dnl
+ i[34567]86-*-aout*)
+changequote([,])dnl
tm_file=i386/i386-aout.h
tmake_file=i386/t-i386bare
;;
- i[[34567]]86-*-bsdi* | i[[34567]]86-*-bsd386*)
+changequote(,)dnl
+ i[34567]86-*-bsdi* | i[34567]86-*-bsd386*)
+changequote([,])dnl
tm_file=i386/bsd386.h
# tmake_file=t-libc-ok
;;
- i[[34567]]86-*-bsd*)
+changequote(,)dnl
+ i[34567]86-*-bsd*)
+changequote([,])dnl
tm_file=i386/386bsd.h
# tmake_file=t-libc-ok
# Next line turned off because both 386BSD and BSD/386 use GNU ld.
# use_collect2=yes
;;
- i[[34567]]86-*-freebsdelf*)
+changequote(,)dnl
+ i[34567]86-*-freebsdelf*)
+changequote([,])dnl
tm_file="i386/i386.h i386/att.h linux.h i386/freebsd-elf.h i386/perform.h"
# On FreeBSD, the headers are already ok, except for math.h.
fixincludes=fixinc.wrap
gnu_ld=yes
stabs=yes
;;
- i[[34567]]86-*-freebsd*)
+changequote(,)dnl
+ i[34567]86-*-freebsd*)
+changequote([,])dnl
tm_file=i386/freebsd.h
# On FreeBSD, the headers are already ok, except for math.h.
fixincludes=fixinc.wrap
tmake_file=i386/t-freebsd
;;
- i[[34567]]86-*-netbsd*)
+changequote(,)dnl
+ i[34567]86-*-netbsd*)
+changequote([,])dnl
tm_file=i386/netbsd.h
xm_file="xm-netbsd.h ${xm_file}"
# On NetBSD, the headers are already okay, except for math.h.
fixincludes=fixinc.wrap
tmake_file=t-netbsd
;;
- i[[34567]]86-*-coff*)
+changequote(,)dnl
+ i[34567]86-*-coff*)
+changequote([,])dnl
tm_file=i386/i386-coff.h
tmake_file=i386/t-i386bare
;;
- i[[34567]]86-*-isc*) # 80386 running ISC system
+changequote(,)dnl
+ i[34567]86-*-isc*) # 80386 running ISC system
+changequote([,])dnl
xm_file="${xm_file} i386/xm-isc.h"
xm_defines="USG SVR3"
case $machine in
- i[[34567]]86-*-isc[[34]]*)
+changequote(,)dnl
+ i[34567]86-*-isc[34]*)
+changequote([,])dnl
xmake_file=i386/x-isc3
;;
*)
xmake_file=i386/x-isc
;;
esac
- if [[ x$gas = xyes -a x$stabs = xyes ]]
+ if test x$gas = xyes -a x$stabs = xyes
then
tm_file=i386/iscdbx.h
tmake_file=i386/t-svr3dbx
fi
install_headers_dir=install-headers-cpio
;;
- i[[34567]]86-*-linux-gnuoldld*) # Intel 80386's running GNU/Linux
- # with a.out format using
+changequote(,)dnl
+ i[34567]86-*-linux-gnuoldld*) # Intel 80386's running GNU/Linux
+changequote([,])dnl # with a.out format using
# pre BFD linkers
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
gnu_ld=yes
float_format=i386
;;
- i[[34567]]86-*-linux-gnuaout*) # Intel 80386's running GNU/Linux
- # with a.out format
+changequote(,)dnl
+ i[34567]86-*-linux-gnuaout*) # Intel 80386's running GNU/Linux
+changequote([,])dnl # with a.out format
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
tm_file=i386/linux-aout.h
gnu_ld=yes
float_format=i386
;;
- i[[34567]]86-*-linux-gnulibc1) # Intel 80386's running GNU/Linux
- # with ELF format using the
+changequote(,)dnl
+ i[34567]86-*-linux-gnulibc1) # Intel 80386's running GNU/Linux
+changequote([,])dnl # with ELF format using the
# GNU/Linux C library 5
xmake_file=x-linux
tm_file=i386/linux.h
fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='single'
fi
;;
- i[[34567]]86-*-linux-gnu*) # Intel 80386's running GNU/Linux
- # with ELF format using glibc 2
+changequote(,)dnl
+ i[34567]86-*-linux-gnu*) # Intel 80386's running GNU/Linux
+changequote([,])dnl # with ELF format using glibc 2
# aka GNU/Linux C library 6
xmake_file=x-linux
tm_file=i386/linux.h
fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
- i[[34567]]86-*-gnu*)
+changequote(,)dnl
+ i[34567]86-*-gnu*)
+changequote([,])dnl
;;
- i[[34567]]86-go32-msdos | i[[34567]]86-*-go32*)
+changequote(,)dnl
+ i[34567]86-go32-msdos | i[34567]86-*-go32*)
+changequote([,])dnl
xm_file=i386/xm-go32.h
tm_file=i386/go32.h
tmake_file=i386/t-go32
;;
- i[[34567]]86-pc-msdosdjgpp*)
+changequote(,)dnl
+ i[34567]86-pc-msdosdjgpp*)
+changequote([,])dnl
xm_file=i386/xm-go32.h
tm_file=i386/go32.h
tmake_file=i386/t-go32
gnu_ld=yes
gas=yes
;;
- i[[34567]]86-moss-msdos* | i[[34567]]86-*-moss*)
+changequote(,)dnl
+ i[34567]86-moss-msdos* | i[34567]86-*-moss*)
+changequote([,])dnl
tm_file=i386/moss.h
tmake_file=t-libc-ok
fixincludes=Makefile.in
gnu_ld=yes
gas=yes
;;
- i[[34567]]86-*-lynxos*)
- if [[ x$gas = xyes ]]
+changequote(,)dnl
+ i[34567]86-*-lynxos*)
+changequote([,])dnl
+ if test x$gas = xyes
then
tm_file=i386/lynx.h
else
tmake_file=i386/t-i386bare
xmake_file=x-lynx
;;
- i[[34567]]86-*-mach*)
+changequote(,)dnl
+ i[34567]86-*-mach*)
+changequote([,])dnl
tm_file=i386/mach.h
# tmake_file=t-libc-ok
use_collect2=yes
;;
- i[[34567]]86-*-osfrose*) # 386 using OSF/rose
- if [[ x$elf = xyes ]]
+changequote(,)dnl
+ i[34567]86-*-osfrose*) # 386 using OSF/rose
+changequote([,])dnl
+ if test x$elf = xyes
then
tm_file=i386/osfelf.h
use_collect2=
tmake_file=i386/t-osf
extra_objs=halfpic.o
;;
- i[[34567]]86-go32-rtems*)
+changequote(,)dnl
+ i[34567]86-go32-rtems*)
+changequote([,])dnl
cpu_type=i386
xm_file=i386/xm-go32.h
tm_file=i386/go32-rtems.h
tmake_file="i386/t-go32 t-rtems"
;;
- i[[34567]]86-*-rtemself*)
+changequote(,)dnl
+ i[34567]86-*-rtemself*)
+changequote([,])dnl
cpu_type=i386
tm_file=i386/rtemself.h
tmake_file="i386/t-i386bare t-rtems"
;;
- i[[34567]]86-*-rtems*)
+changequote(,)dnl
+ i[34567]86-*-rtems*)
+changequote([,])dnl
cpu_type=i386
tm_file=i386/rtems.h
tmake_file="i386/t-i386bare t-rtems"
;;
- i[[34567]]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
+changequote(,)dnl
+ i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
+changequote([,])dnl
xm_file="xm-siglist.h xm-alloca.h ${xm_file} i386/xm-sco5.h"
xm_defines="USG SVR3"
xmake_file=i386/x-sco5
fixincludes=fixinc.sco
install_headers_dir=install-headers-cpio
tm_file=i386/sco5.h
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="i386/sco5gas.h ${tm_file}"
tmake_file=i386/t-sco5gas
fi
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
;;
- i[[34567]]86-*-sco3.2v4*) # 80386 running SCO 3.2v4 system
+changequote(,)dnl
+ i[34567]86-*-sco3.2v4*) # 80386 running SCO 3.2v4 system
+changequote([,])dnl
xm_file="${xm_file} i386/xm-sco.h"
xm_defines="USG SVR3 BROKEN_LDEXP SMALL_ARG_MAX NO_SYS_SIGLIST"
xmake_file=i386/x-sco4
fixincludes=fixinc.sco
install_headers_dir=install-headers-cpio
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=i386/sco4dbx.h
tmake_file=i386/t-svr3dbx
fi
truncate_target=yes
;;
- i[[34567]]86-*-sco*) # 80386 running SCO system
+changequote(,)dnl
+ i[34567]86-*-sco*) # 80386 running SCO system
+changequote([,])dnl
xm_file=i386/xm-sco.h
xmake_file=i386/x-sco
install_headers_dir=install-headers-cpio
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=i386/scodbx.h
tmake_file=i386/t-svr3dbx
fi
truncate_target=yes
;;
- i[[34567]]86-*-solaris2*)
+changequote(,)dnl
+ i[34567]86-*-solaris2*)
+changequote([,])dnl
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=i386/sol2dbg.h
else
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
xmake_file=x-svr4
case $machine in
- *-*-solaris2.[[0-4]])
+changequote(,)dnl
+ *-*-solaris2.[0-4])
+changequote([,])dnl
fixincludes=fixinc.svr4;;
*)
fixincludes=fixinc.wrap;;
esac
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='solaris'
fi
;;
- i[[34567]]86-*-sysv5*) # Intel x86 on System V Release 5
+changequote(,)dnl
+ i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
+changequote([,])dnl
xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
xm_defines="USG POSIX"
tm_file=i386/sysv4.h
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
extra_parts="crtbegin.o crtend.o"
fixincludes=Makefile.in # The headers are just fine, thank you.
;;
- i[[34567]]86-*-sysv4*) # Intel 80386's running system V.4
+changequote(,)dnl
+ i[34567]86-*-sysv4*) # Intel 80386's running system V.4
+changequote([,])dnl
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
tm_file=i386/sysv4.h
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
;;
- i[[34567]]86-*-osf1*) # Intel 80386's running OSF/1 1.3+
+changequote(,)dnl
+ i[34567]86-*-osf1*) # Intel 80386's running OSF/1 1.3+
+changequote([,])dnl
cpu_type=i386
xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h i386/xm-osf1elf.h"
xm_defines="USE_C_ALLOCA SMALL_ARG_MAX"
fixincludes=Makefile.in #Don't do it on OSF/1
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=i386/osf1elfgdb.h
else
xmake_file=i386/x-osf1elf
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
- i[[34567]]86-*-sysv*) # Intel 80386's running system V
+changequote(,)dnl
+ i[34567]86-*-sysv*) # Intel 80386's running system V
+changequote([,])dnl
xm_defines="USG SVR3"
xmake_file=i386/x-sysv3
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=i386/svr3dbx.h
tmake_file=i386/t-svr3dbx
tmake_file=i386/t-vsta
xmake_file=i386/x-vsta
;;
- i[[34567]]86-*-win32)
+changequote(,)dnl
+ i[34567]86-*-win32)
+changequote([,])dnl
xm_file="${xm_file} i386/xm-cygwin32.h"
tmake_file=i386/t-cygwin32
tm_file=i386/win32.h
xmake_file=i386/x-cygwin32
extra_objs=winnt.o
fixincludes=Makefile.in
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
;;
- i[[34567]]86-*-pe | i[[34567]]86-*-cygwin32)
+changequote(,)dnl
+ i[34567]86-*-pe | i[34567]86-*-cygwin32)
+changequote([,])dnl
xm_file="${xm_file} i386/xm-cygwin32.h"
tmake_file=i386/t-cygwin32
tm_file=i386/cygwin32.h
xmake_file=i386/x-cygwin32
extra_objs=winnt.o
fixincludes=Makefile.in
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
;;
- i[[34567]]86-*-mingw32*)
+changequote(,)dnl
+ i[34567]86-*-mingw32*)
+changequote([,])dnl
tm_file=i386/mingw32.h
xm_file="${xm_file} i386/xm-mingw32.h"
tmake_file="i386/t-cygwin32 i386/t-mingw32"
extra_objs=winnt.o
xmake_file=i386/x-cygwin32
fixincludes=Makefile.in
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
;;
esac
;;
- i[[34567]]86-*-winnt3*)
+changequote(,)dnl
+ i[34567]86-*-winnt3*)
+changequote([,])dnl
tm_file=i386/win-nt.h
out_file=i386/i386.c
xm_file="xm-winnt.h ${xm_file}"
extra_host_objs="winnt.o oldnames.o"
extra_gcc_objs="spawnv.o oldnames.o"
fixincludes=fixinc.winnt
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
extra_programs=ld.exe
fi
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
;;
- i[[34567]]86-dg-dgux*)
+changequote(,)dnl
+ i[34567]86-dg-dgux*)
+changequote([,])dnl
xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
xm_defines="USG POSIX"
out_file=i386/dgux.c
;;
i860-*-bsd*)
tm_file="${tm_file} i860/bsd.h"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="${tm_file} i860/bsd-gas.h"
fi
m68000-hp-hpux*) # HP 9000 series 300
xm_file="xm_alloca.h ${xm_file}"
xm_defines="USG NO_SYS_SIGLIST"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
tm_file=m68k/hp310g.h
m68000-att-sysv*)
xm_file="m68k/xm-3b1.h ${xm_file}"
xm_defines=USG
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=m68k/3b1g.h
else
extra_headers=math-68881.h
extra_parts="crt1.o mcrt1.o maccrt1.o crt2.o crtn.o"
tm_file=
- if [[ "$gnu_ld" = yes ]]
+ if test "$gnu_ld" = yes
then
tm_file="${tm_file} m68k/auxgld.h"
else
tm_file="${tm_file} m68k/auxld.h"
fi
- if [[ "$gas" = yes ]]
+ if test "$gas" = yes
then
tm_file="${tm_file} m68k/auxgas.h"
else
float_format=m68k
;;
m68k-altos-sysv*) # Altos 3068
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=m68k/altos3068.h
xm_defines=USG
extra_headers=math-68881.h
;;
m68k-bull-sysv*) # Bull DPX/2
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=m68k/dpx2cdbx.h
else
tm_file=m68k/mot3300.h
xm_file="xm-alloca.h m68k/xm-mot3300.h ${xm_file}"
xm_defines=NO_SYS_SIGLIST
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
xmake_file=m68k/x-mot3300-gas
- if [[ x$gnu_ld = xyes ]]
+ if test x$gnu_ld = xyes
then
tmake_file=m68k/t-mot3300-gald
else
fi
else
xmake_file=m68k/x-mot3300
- if [[ x$gnu_ld = xyes ]]
+ if test x$gnu_ld = xyes
then
tmake_file=m68k/t-mot3300-gld
else
float_format=m68k
;;
m68k-isi-bsd*)
- if [[ x$with_fp = xno ]]
+ if test x$with_fp = xno
then
tm_file=m68k/isi-nfp.h
else
m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
xm_file="xm_alloca.h ${xm_file}"
xm_defines="USG NO_SYS_SIGLIST"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
tm_file=m68k/hp320g.h
m68k-hp-hpux*) # HP 9000 series 300
xm_file="xm_alloca.h ${xm_file}"
xm_defines="USG NO_SYS_SIGLIST"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
tm_file=m68k/hp320g.h
float_format=m68k
;;
m68k-sony-newsos3*)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=m68k/news3gas.h
else
float_format=m68k
;;
m68k-sony-bsd* | m68k-sony-newsos*)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=m68k/newsgas.h
else
extra_objs=nextstep.o
extra_headers=math-68881.h
float_format=m68k
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='mach'
fi
;;
m68k-sun-sunos3*)
- if [[ x$with_fp = xno ]]
+ if test x$with_fp = xno
then
tm_file=m68k/sun3n3.h
else
extra_headers=math-68881.h
;;
m68k-sun-sunos*) # For SunOS 4 (the default).
- if [[ x$with_fp = xno ]]
+ if test x$with_fp = xno
then
tm_file=m68k/sun3n.h
else
float_format=m68k
;;
m68k-*-lynxos*)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=m68k/lynx.h
else
extra_headers=math-68881.h
float_format=m68k
gnu_ld=yes
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
esac
extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
xmake_file=m88k/x-dgux
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=m88k/t-dgux-gas
fi
extra_parts="crtbegin.o crtend.o"
xm_file="m88k/xm-sysv3.h ${xm_file}"
xmake_file=m88k/x-dolph
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=m88k/t-m88k-gas
fi
extra_parts="crtbegin.o crtend.o"
xm_file="m88k/xm-sysv3.h ${xm_file}"
xmake_file=m88k/x-tekXD88
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=m88k/t-m88k-gas
fi
m88k-*-luna*)
tm_file=m88k/luna.h
extra_parts="crtbegin.o crtend.o"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=m88k/t-luna-gas
else
extra_parts="crtbegin.o crtend.o"
xm_file="m88k/xm-sysv3.h ${xm_file}"
xmake_file=m88k/x-sysv3
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=m88k/t-m88k-gas
fi
fixincludes=fixinc.irix
xmake_file=mips/x-iris6
tmake_file=mips/t-iris6
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
tmake_file=mips/t-cross64
# See comment in mips/iris[56].h files.
use_collect2=yes
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sni-sysv4)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file=mips/iris5gdb.h
else
xm_defines=USG
xmake_file=mips/x-sni-svr4
tmake_file=mips/t-mips-gas
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-sgi-irix5*) # SGI System V.4., IRIX 5
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file="mips/iris5.h mips/iris5gas.h"
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-mips-gas
# See comment in mips/iris5.h file.
use_collect2=yes
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sgi-irix4loser*) # Mostly like a MIPS.
tm_file="mips/iris4loser.h mips/iris3.h ${tm_file} mips/iris4.h"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-iris
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sgi-irix4*) # Mostly like a MIPS.
tm_file="mips/iris3.h ${tm_file} mips/iris4.h"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-iris
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='irix'
fi
;;
mips-sgi-*) # Mostly like a MIPS.
tm_file="mips/iris3.h ${tm_file}"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-iris3
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-dec-osf*) # Decstation running OSF/1 as shipped by DIGITAL
tm_file=mips/dec-osf1.h
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xmake_file=mips/x-dec-osf1
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
mips-dec-bsd*) # Decstation running 4.4 BSD
tm_file=mips/dec-bsd.h
fixincludes=
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-sony-bsd* | mips-sony-newsos*) # Sony NEWS 3600 or risc/news.
tm_file="mips/news4.h ${tm_file}"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
# That is based on svr4.
# t-svr4 is not right because this system doesn't use ELF.
tm_file="mips/news5.h ${tm_file}"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h ${xm_file}"
xm_defines=USG
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-tandem-sysv4*) # Tandem S2 running NonStop UX
tm_file="mips/svr4-5.h mips/svr4-t.h"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h ${xm_file}"
xm_defines=USG
xmake_file=mips/x-sysv
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
extra_parts="crtbegin.o crtend.o"
tmake_file=mips/t-mips
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-ultrix* | mips-dec-mach3) # Decstation.
tm_file="mips/ultrix.h ${tm_file}"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xmake_file=mips/x-ultrix
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
tmake_file=mips/t-ultrix
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
- mips-*-riscos[[56789]]bsd*)
+changequote(,)dnl
+ mips-*-riscos[56789]bsd*)
+changequote([,])dnl
tm_file=mips/bsd-5.h # MIPS BSD 4.3, RISC-OS 5.0
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-bsd-gas
else
tmake_file=mips/t-bsd
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
- mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[[1234]]bsd*)
+changequote(,)dnl
+ mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[1234]bsd*)
+changequote([,])dnl
tm_file="mips/bsd-4.h ${tm_file}" # MIPS BSD 4.3, RISC-OS 4.0
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-bsd-gas
else
tmake_file=mips/t-bsd
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
- mips-*-riscos[[56789]]sysv4*)
+changequote(,)dnl
+ mips-*-riscos[56789]sysv4*)
+changequote([,])dnl
tm_file=mips/svr4-5.h # MIPS System V.4., RISC-OS 5.0
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h ${xm_file}"
xmake_file=mips/x-sysv
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr4-gas
else
tmake_file=mips/t-svr4
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
- mips-*-sysv4* | mips-*-riscos[[1234]]sysv4* | mips-*-riscossysv4*)
+changequote(,)dnl
+ mips-*-sysv4* | mips-*-riscos[1234]sysv4* | mips-*-riscossysv4*)
+changequote([,])dnl
tm_file="mips/svr4-4.h ${tm_file}"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-sysv
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr4-gas
else
tmake_file=mips/t-svr4
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
- mips-*-riscos[[56789]]sysv*)
+changequote(,)dnl
+ mips-*-riscos[56789]sysv*)
+changequote([,])dnl
tm_file=mips/svr3-5.h # MIPS System V.3, RISC-OS 5.0
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-sysv
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr3-gas
else
tmake_file=mips/t-svr3
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mips-*-sysv* | mips-*-riscos*sysv*)
tm_file="mips/svr3-4.h ${tm_file}"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
xm_defines=USG
xmake_file=mips/x-sysv
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-svr3-gas
else
tmake_file=mips/t-svr3
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
- mips-*-riscos[[56789]]*) # Default MIPS RISC-OS 5.0.
+changequote(,)dnl
+ mips-*-riscos[56789]*) # Default MIPS RISC-OS 5.0.
+changequote([,])dnl
tm_file=mips/mips-5.h
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
;;
mipsel-*-ecoff*)
tm_file=mips/ecoffl.h
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-ecoff
;;
mips-*-ecoff*)
tm_file="gofast.h mips/ecoff.h"
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
tmake_file=mips/t-ecoff
use_collect2=yes
;;
mips-*-*) # Default MIPS RISC-OS 4.0.
- if [[ x$stabs = xyes ]]; then
+ if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
else
extra_passes="mips-tfile mips-tdump"
fi
- if [[ x$gnu_ld != xyes ]]
+ if test x$gnu_ld != xyes
then
use_collect2=yes
fi
mn10200-*-*)
cpu_type=mn10200
tm_file="mn10200/mn10200.h"
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
mn10300-*-*)
cpu_type=mn10300
tm_file="mn10300/mn10300.h"
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
extra_headers=ppc-asm.h
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
else
;;
powerpc-*-eabi*)
tm_file=rs6000/eabi.h
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
else
;;
powerpc-*-rtems*)
tm_file=rs6000/rtems.h
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
else
tm_file=rs6000/linux.h
xm_file=rs6000/xm-sysv4.h
out_file=rs6000/rs6000.c
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
else
fixincludes=Makefile.in
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG ${xm_defines}"
out_file=rs6000/rs6000.c
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
else
fixincludes=Makefile.in
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
tm_file=rs6000/sysv4le.h
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
else
;;
powerpcle-*-eabi*)
tm_file=rs6000/eabile.h
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
else
tmake_file=rs6000/t-winnt
# extra_objs=pe.o
fixincludes=Makefile.in
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
extra_headers=ppc-asm.h
xmake_file=rs6000/x-cygwin32
# extra_objs=pe.o
fixincludes=Makefile.in
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
tm_file=rs6000/sol2.h
xm_file="xm-siglist.h rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
else
fi
xmake_file=rs6000/x-sysv4
case $machine in
- *-*-solaris2.[[0-4]])
+changequote(,)dnl
+ *-*-solaris2.[0-4])
+changequote([,])dnl
fixincludes=fixinc.svr4;;
*)
fixincludes=fixinc.wrap;;
esac
extra_headers=ppc-asm.h
;;
- rs6000-ibm-aix3.[[01]]*)
+changequote(,)dnl
+ rs6000-ibm-aix3.[01]*)
+changequote([,])dnl
tm_file=rs6000/aix31.h
xmake_file=rs6000/x-aix31
use_collect2=yes
;;
- rs6000-ibm-aix3.2.[[456789]]* | powerpc-ibm-aix3.2.[[456789]]*)
+changequote(,)dnl
+ rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
+changequote([,])dnl
tm_file=rs6000/aix3newas.h
- if [[ x$host != x$target ]]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xnewas
else
fi
use_collect2=yes
;;
- rs6000-ibm-aix4.[[12]].* | powerpc-ibm-aix4.[[12]].*)
+changequote(,)dnl
+ rs6000-ibm-aix4.[12].* | powerpc-ibm-aix4.[12].*)
+changequote([,])dnl
tm_file=rs6000/aix41.h
- if [[ x$host != x$target ]]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xnewas
else
xmake_file=rs6000/x-aix41
use_collect2=yes
;;
- rs6000-ibm-aix4.[[3456789]].* | powerpc-ibm-aix4.[[3456789]].*)
+changequote(,)dnl
+ rs6000-ibm-aix4.[3456789].* | powerpc-ibm-aix4.[3456789].*)
+changequote([,])dnl
tm_file=rs6000/aix43.h
- if [[ x$host != x$target ]]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xaix43
else
xmake_file=rs6000/x-aix43
use_collect2=yes
;;
- rs6000-ibm-aix[[56789]].* | powerpc-ibm-aix[[56789]].*)
+changequote(,)dnl
+ rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
+changequote([,])dnl
tm_file=rs6000/aix43.h
- if [[ x$host != x$target ]]
+ if test x$host != x$target
then
tmake_file=rs6000/t-xaix43
else
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
- if [[ x$enable_threads = xyes ]]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
sparc-*-lynxos*)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
tm_file=sparc/lynx.h
else
tm_file=sparc/rtems.h
;;
sparc-*-solaris2*)
- if [[ x$gnu_ld = xyes ]]
+ if test x$gnu_ld = xyes
then
tm_file=sparc/sol2.h
else
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
case $machine in
- *-*-solaris2.[[0-4]])
+changequote(,)dnl
+ *-*-solaris2.[0-4])
+changequote([,])dnl
fixincludes=fixinc.svr4;;
*)
fixincludes=fixinc.wrap;;
esac
float_format=i128
- if [[ x${enable_threads} = x ]]; then
+ if test x${enable_threads} = x; then
enable_threads=$have_pthread_h
- if [[ x${enable_threads} = x ]]; then
+ if test x${enable_threads} = x; then
enable_threads=$have_thread_h
fi
fi
- if [[ x${enable_threads} = xyes ]]; then
- if [[ x${have_pthread_h} = xyes ]]; then
+ if test x${enable_threads} = xyes; then
+ if test x${have_pthread_h} = xyes; then
thread_file='posix'
else
thread_file='solaris'
tm_file=sparc/sunos4.h
tmake_file=sparc/t-sunos41
use_collect2=yes
- if [[ x$gas = xyes ]]; then
+ if test x$gas = xyes; then
tm_file="${tm_file} sparc/sun4gas.h"
fi
;;
tm_file="v850/v850.h"
xm_file="v850/xm-v850.h"
tmake_file=v850/t-v850
- if [[ x$stabs = xyes ]]
+ if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
fi
;;
esac
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
- if [[ "$target_cpu_default2" = "" ]]
+ if test "$target_cpu_default2" = ""
then
target_cpu_default2="MASK_GAS"
else
;;
*)
- if [[ x$pass2done = xyes ]]
+ if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
;;
mips*-*-ecoff* | mips*-*-elf*)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
- if [[ x$gnu_ld = xyes ]]
+ if test x$gnu_ld = xyes
then
target_cpu_default2=20
else
fi
;;
mips*-*-*)
- if [[ x$gas = xyes ]]
+ if test x$gas = xyes
then
target_cpu_default2=16
fi
;;
*)
- if [[ x$pass2done = xyes ]]
+ if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
*)
- if [[ x$pass2done = xyes ]]
+ if test x$pass2done = xyes
then
echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
exit 1
;;
esac
- if [[ "$target_cpu_default2" != "" ]]
+ if test "$target_cpu_default2" != ""
then
- if [[ "$target_cpu_default" != "" ]]
+ if test "$target_cpu_default" != ""
then
target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
else
# Save data on machine being used to compile GCC in build_xm_file.
# Save data on host machine in vars host_xm_file and host_xmake_file.
- if [[ x$pass1done = x ]]
+ if test x$pass1done = x
then
- if [[ x"$xm_file" = x ]]
+ if test x"$xm_file" = x
then build_xm_file=$cpu_type/xm-$cpu_type.h
else build_xm_file=$xm_file
fi
build_exeext=$exeext
pass1done=yes
else
- if [[ x$pass2done = x ]]
+ if test x$pass2done = x
then
- if [[ x"$xm_file" = x ]]
+ if test x"$xm_file" = x
then host_xm_file=$cpu_type/xm-$cpu_type.h
else host_xm_file=$xm_file
fi
host_xm_defines=$xm_defines
- if [[ x"$xmake_file" = x ]]
+ if test x"$xmake_file" = x
then xmake_file=$cpu_type/x-$cpu_type
fi
host_xmake_file="$xmake_file"
extra_objs="${host_extra_objs} ${extra_objs}"
# Default the target-machine variables that were not explicitly set.
-if [[ x"$tm_file" = x ]]
+if test x"$tm_file" = x
then tm_file=$cpu_type/$cpu_type.h; fi
-if [[ x$extra_headers = x ]]
+if test x$extra_headers = x
then extra_headers=; fi
-if [[ x"$xm_file" = x ]]
+if test x"$xm_file" = x
then xm_file=$cpu_type/xm-$cpu_type.h; fi
-if [[ x$md_file = x ]]
+if test x$md_file = x
then md_file=$cpu_type/$cpu_type.md; fi
-if [[ x$out_file = x ]]
+if test x$out_file = x
then out_file=$cpu_type/$cpu_type.c; fi
-if [[ x"$tmake_file" = x ]]
+if test x"$tmake_file" = x
then tmake_file=$cpu_type/t-$cpu_type
fi
-if [[ x$float_format = x ]]
+if test x$float_format = x
then float_format=i64
fi
-if [[ x$enable_haifa = x ]]
+if test x$enable_haifa = x
then
case $target in
alpha*-* | hppa1.?-* | powerpc*-* | rs6000-* | *sparc*-* | m32r*-*)
for f in $tm_file; do
count=${count}x
done
-if [[ $count = ax ]]; then
+if test $count = ax; then
echo "Using \`$srcdir/config/$tm_file' as target machine macro file."
else
echo "Using the following target machine macro files:"
for f in $host_xm_file; do
count=${count}x
done
-if [[ $count = ax ]]; then
+if test $count = ax; then
echo "Using \`$srcdir/config/$host_xm_file' as host machine macro file."
else
echo "Using the following host machine macro files:"
done
fi
-if [[ "$host_xm_file" != "$build_xm_file" ]]; then
+if test "$host_xm_file" != "$build_xm_file"; then
count=a
for f in $build_xm_file; do
count=${count}x
done
- if [[ $count = ax ]]; then
+ if test $count = ax; then
echo "Using \`$srcdir/config/$build_xm_file' as build machine macro file."
else
echo "Using the following build machine macro files:"
fi
fi
-if [[ x$thread_file = x ]]; then
- if [[ x$target_thread_file != x ]]; then
+if test x$thread_file = x; then
+ if test x$target_thread_file != x; then
thread_file=$target_thread_file
else
thread_file='single'
# If host=build, it is correct to have hconfig include auto-host.h
# as well. If host!=build, we are in error and need to do more
# work to find out the build config parameters.
-if [[ x$host = x$build ]]
+if test x$host = x$build
then
build_xm_file="auto-host.h ${build_xm_file}"
else
defines="host_xm_defines null_defines xm_defines build_xm_defines"
rm -f config.bak
-if [[ -f config.status ]]; then mv -f config.status config.bak; fi
+if test -f config.status; then mv -f config.status config.bak; fi
# Make the links.
-while [[ -n "$vars" ]]
+while test -n "$vars"
do
set $vars; var=$1; shift; vars=$*
set $links; link=$1; shift; links=$*
# Define TARGET_CPU_DEFAULT if the system wants one.
# This substitutes for lots of *.h files.
- if [[ "$target_cpu_default" != "" -a $link = tm.h ]]
+ if test "$target_cpu_default" != "" -a $link = tm.h
then
echo "#define TARGET_CPU_DEFAULT ($target_cpu_default)" >>$link
fi
done
# Truncate the target if necessary
-if [[ x$host_truncate_target != x ]]; then
+if test x$host_truncate_target != x; then
target=`echo $target | sed -e 's/\(..............\).*/\1/'`
fi
# Get the version trigger filename from the toplevel
-if [[ "${with_gcc_version_trigger+set}" = set ]]; then
+if test "${with_gcc_version_trigger+set}" = set; then
gcc_version_trigger=$with_gcc_version_trigger
else
gcc_version_trigger=${srcdir}/version.c
fi
-gcc_version=`sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/' < ${gcc_version_trigger}`
+changequote(,)dnl
+gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
+changequote([,])dnl
# Get an absolute path to the GCC top-level source directory
holddir=`pwd`
dep_host_xmake_file=
for f in .. ${host_xmake_file}
do
- if [[ -f ${srcdir}/config/$f ]]
+ if test -f ${srcdir}/config/$f
then
dep_host_xmake_file="${dep_host_xmake_file} ${srcdir}/config/$f"
fi
dep_tmake_file=
for f in .. ${tmake_file}
do
- if [[ -f ${srcdir}/config/$f ]]
+ if test -f ${srcdir}/config/$f
then
dep_tmake_file="${dep_tmake_file} ${srcdir}/config/$f"
fi
# Also use all.cross instead of all.internal
# and add cross-make to Makefile.
cross_overrides="/dev/null"
-if [[ x$host != x$target ]]
+if test x$host != x$target
then
cross_defines="CROSS=-DCROSS_COMPILE"
cross_overrides="${topdir}/cross-make"
# This must come after cross-make as we want all.build to override
# all.cross.
build_overrides="/dev/null"
-if [[ x$build != x$host ]]
+if test x$build != x$host
then
build_overrides="${topdir}/build-make"
fi
# Expand extra_headers to include complete path.
# This substitutes for lots of t-* files.
extra_headers_list=
-if [[ "x$extra_headers" = x ]]
+if test "x$extra_headers" = x
then true
else
# Prepend ${srcdir}/ginclude/ to every entry in extra_headers.
done
fi
-if [[ x$use_collect2 = xno ]]; then
+if test x$use_collect2 = xno; then
use_collect2=
fi
# Add a definition of USE_COLLECT2 if system wants one.
# Also tell toplev.c what to do.
# This substitutes for lots of t-* files.
-if [[ x$use_collect2 = x ]]
+if test x$use_collect2 = x
then
will_use_collect2=
maybe_use_collect2=
# building gcc with a cross compiler, use the cross compiler just
# built. Otherwise, we can use the cpp just built.
md_file_sub=
-if [[ "x$md_cppflags" = x ]]
+if test "x$md_cppflags" = x
then
md_file_sub=$srcdir/config/$md_file
else
fi
# If we have gas in the build tree, make a link to it.
-if [[ -f ../gas/Makefile ]]; then
+if test -f ../gas/Makefile; then
rm -f as; $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
fi
# If we have nm in the build tree, make a link to it.
-if [[ -f ../binutils/Makefile ]]; then
+if test -f ../binutils/Makefile; then
rm -f nm; $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
fi
# If we have ld in the build tree, make a link to it.
-if [[ -f ../ld/Makefile ]]; then
-# if [[ x$use_collect2 = x ]]; then
+if test -f ../ld/Makefile; then
+# if test x$use_collect2 = x; then
# rm -f ld; $symbolic_link ../ld/ld-new$host_exeext ld$host_exeext 2>/dev/null
# else
rm -f collect-ld; $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext 2>/dev/null
gcc_cv_as=
gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,gcc$,gas,'`
-if [[ -x as$host_exeext ]]; then
+if test -x as$host_exeext; then
# Build using assembler in the current directory.
gcc_cv_as=./as$host_exeext
-elif [[ -f $gcc_cv_as_gas_srcdir/configure.in ]]; then
+elif test -f $gcc_cv_as_gas_srcdir/configure.in; then
# Single tree build which includes gas.
for f in $gcc_cv_as_gas_srcdir/configure $gcc_cv_as_gas_srcdir/configure.in $gcc_cv_as_gas_srcdir/Makefile.in
do
- gcc_cv_gas_version=`grep '^VERSION=[[0-9]]*\.[[0-9]]*' $f`
- if [[ x$gcc_cv_gas_version != x ]]; then
+changequote(,)dnl
+ gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
+changequote([,])dnl
+ if test x$gcc_cv_gas_version != x; then
break
fi
done
- gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([[0-9]]*\)"`
- gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[[0-9]]*\.\([[0-9]]*\)"`
- if [[ x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x ]]; then
+changequote(,)dnl
+ gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
+ gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+changequote([,])dnl
+ if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
# Gas version 2.6 and later support for .balign and .p2align.
# bytes to skip when using .p2align.
- if [[ "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2 ]]; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
gcc_cv_as_alignment_features=".balign and .p2align"
AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN)
fi
# Gas version 2.8 and later support specifying the maximum
# bytes to skip when using .p2align.
- if [[ "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2 ]]; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
gcc_cv_as_alignment_features=".p2align including maximum skip"
AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN)
fi
fi
-elif [[ x$host = x$target ]]; then
+elif test x$host = x$target; then
# Native build.
gcc_cv_as=as$host_exeext
fi
-if [[ x$gcc_cv_as != x ]]; then
+if test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo ".balign 4" > conftest.s
echo ".p2align 2" >> conftest.s
..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
- ${srcdir}/[[*]]/config-lang.in) ;;
- *) subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([[^/]]*\)/config-lang.in$,\1,'`" ;;
+changequote(,)dnl
+ ${srcdir}/[*]/config-lang.in) ;;
+ *) subdirs="$subdirs `echo $lang | sed -e 's,^.*/\([^/]*\)/config-lang.in$,\1,'`" ;;
+changequote([,])dnl
esac
done
# Make gthr-default.h if we have a thread file.
gthread_flags=
-if [[ $thread_file != single ]]; then
+if test $thread_file != single; then
rm -f gthr-default.h
echo "#include \"gthr-${thread_file}.h\"" > gthr-default.h
gthread_flags=-DHAVE_GTHR_DEFAULT
touch specs.h options.h
for subdir in . $subdirs
do
- if [[ -f $srcdir/$subdir/lang-specs.h ]]; then
+ if test -f $srcdir/$subdir/lang-specs.h; then
echo "#include \"$subdir/lang-specs.h\"" >>specs.h
lang_specs_files="$lang_specs_files $srcdir/$subdir/lang-specs.h"
fi
- if [[ -f $srcdir/$subdir/lang-options.h ]]; then
+ if test -f $srcdir/$subdir/lang-options.h; then
echo "#include \"$subdir/lang-options.h\"" >>options.h
lang_options_files="$lang_options_files $srcdir/$subdir/lang-options.h"
fi
for s in .. $subdirs
do
- if [[ $s != ".." ]]
+ if test $s != ".."
then
language=
boot_language=
outputs=
lib2funcs=
. ${srcdir}/$s/config-lang.in
- if [[ "x$language" = x ]]
+ if test "x$language" = x
then
echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2
exit 1
fi
all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in ${srcdir}/$s/Makefile.in"
all_languages="$all_languages $language"
- if [[ "x$boot_language" = xyes ]]
+ if test "x$boot_language" = xyes
then
all_boot_languages="$all_boot_languages $language"
fi
all_diff_excludes="$all_diff_excludes $diff_excludes"
all_headers="$all_headers $headers"
all_outputs="$all_outputs $outputs"
- if [[ x$outputs = x ]]
+ if test x$outputs = x
then
oldstyle_subdirs="$oldstyle_subdirs $s"
fi
x=
for l in .. $all_languages
do
- if [[ $l != ".." ]]; then
+ if test $l != ".."; then
x="$x $l.$t"
fi
done
# If we're not building in srcdir, create .gdbinit.
-if [[ ! -f Makefile.in ]]; then
+if test ! -f Makefile.in; then
echo "dir ." > .gdbinit
echo "dir ${srcdir}" >> .gdbinit
- if [[ x$gdb_needs_out_file_path = xyes ]]
+ if test x$gdb_needs_out_file_path = xyes
then
echo "dir ${srcdir}/config/"`dirname ${out_file}` >> .gdbinit
fi
- if [[ "x$subdirs" != x ]]; then
+ if test "x$subdirs" != x; then
for s in $subdirs
do
echo "dir ${srcdir}/$s" >> .gdbinit
build_canonical=${build}
host_canonical=${host}
target_subdir=
-if [[ "${host}" != "${target}" ]] ; then
+if test "${host}" != "${target}" ; then
target_subdir=${target}/
fi
AC_SUBST(build_canonical)
# libgcc.a, but that's OK because newib should have its own version of
# assert.h.
inhibit_libc=
-if [[ x$with_newlib = xyes ]]; then
+if test x$with_newlib = xyes; then
inhibit_libc=-Dinhibit_libc
fi
AC_SUBST(inhibit_libc)
# Override SCHED_OBJ and SCHED_CFLAGS to enable the Haifa scheduler.
sched_prefix=
sched_cflags=
-if [[ x$enable_haifa = xyes ]]; then
+if test x$enable_haifa = xyes; then
echo "Using the Haifa scheduler."
sched_prefix=haifa-
sched_cflags=-DHAIFA
fi
AC_SUBST(sched_prefix)
AC_SUBST(sched_cflags)
-if [[ x$enable_haifa != x ]]; then
+if test x$enable_haifa != x; then
# Explicitly remove files that need to be recompiled for the Haifa scheduler.
for x in genattrtab.o toplev.o loop.o unroll.o *sched.o; do
- if [[ -f $x ]]; then
+ if test -f $x; then
echo "Removing $x"
rm -f $x
fi
# Warn if using init_priority.
AC_MSG_CHECKING(whether to enable init_priority by default)
-if [[ x$enable_init_priority != xyes ]]; then
+if test x$enable_init_priority != xyes; then
enable_init_priority=no
fi
AC_MSG_RESULT($enable_init_priority)
AC_SUBST_FILE(language_hooks)
# Echo that links are built
-if [[ x$host = x$target ]]
+if test x$host = x$target
then
str1="native "
else
str2=" from $host"
fi
-if [[ x$host != x$build ]]
+if test x$host != x$build
then
str3=" on a $build system"
fi
-if [[ "x$str2" != x ]] || [[ "x$str3" != x ]]
+if test "x$str2" != x || test "x$str3" != x
then
str4=
fi
echo "Links are now set up to build a ${str1}compiler for ${target}$str4" 1>&2
-if [[ "x$str2" != x ]] || [[ "x$str3" != x ]]
+if test "x$str2" != x || test "x$str3" != x
then
echo " ${str2}${str3}." 1>&2
fi
# Truncate the target if necessary
-if [[ x$host_truncate_target != x ]]; then
+if test x$host_truncate_target != x; then
target=`echo $target | sed -e 's/\(..............\).*/\1/'`
fi
# FLAGS_TO_PASS has been modified to solve the problem there.
# This is virtually a duplicate of what happens in configure.lang; we do
# an extra check to make sure this only happens if ln -s can be used.
-if [[ "$symbolic_link" = "ln -s" ]]; then
+if test "$symbolic_link" = "ln -s"; then
for d in .. ${subdirs} ; do
- if [[ $d != .. ]]; then
+ if test $d != ..; then
STARTDIR=`pwd`
cd $d
for t in stage1 stage2 stage3 stage4 include
projects / gcc.git / commitdiff