+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * m4/sim_ac_common.m4, m4/sim_ac_option_alignment.m4,
+ m4/sim_ac_option_assert.m4, m4/sim_ac_option_bitsize.m4,
+ m4/sim_ac_option_cgen_maint.m4, m4/sim_ac_option_default_model.m4,
+ m4/sim_ac_option_endian.m4, m4/sim_ac_option_environment.m4,
+ m4/sim_ac_option_float.m4, m4/sim_ac_option_hardware.m4,
+ m4/sim_ac_option_inline.m4, m4/sim_ac_option_reserved_bits.m4,
+ m4/sim_ac_option_scache.m4, m4/sim_ac_option_smp.m4,
+ m4/sim_ac_option_warnings.m4, m4/sim_ac_option_xor_endian.m4,
+ m4/sim_ac_output.m4: New files.
+
2021-02-20 Mike Frysinger <vapier@gentoo.org>
* configure.tgt: Move arch list ...
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian=""
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl along with this program. If not, see <http://www.gnu.org/licenses/>. */
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian=""
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
SDL_LIBS
SDL_CFLAGS
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
+sim_default_model
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_bitsize.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_float
cgen_breaks
cgen
cgendir
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
sim_scache
-sim_float
+sim_inline
sim_endian
+sim_default_model
sim_bitsize
sim_alignment'
ac_subst_files=''
-
wire_word_bitsize="64"
wire_word_msb=""
wire_address_bitsize=""
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * acinclude.m4: Removed.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* acinclude.m4: Delete all sinclude & m4_include calls.
+++ /dev/null
-# This file contains common code used by all simulators.
-#
-# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
-# directory. It is intended to be invoked before any target specific stuff.
-# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
-# It is intended to be invoked last.
-#
-# See README-HACKING for more details.
-
-AC_DEFUN([SIM_AC_COMMON],
-[
-AC_REQUIRE([AC_PROG_CC])
-AC_CONFIG_HEADERS([config.h:config.in])
-AC_CANONICAL_SYSTEM
-AC_USE_SYSTEM_EXTENSIONS
-AC_C_BIGENDIAN
-AC_ARG_PROGRAM
-AC_PROG_INSTALL
-
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-if test -z "$CC_FOR_BUILD"; then
- if test "x$cross_compiling" = "xno"; then
- CC_FOR_BUILD='$(CC)'
- else
- CC_FOR_BUILD=gcc
- fi
-fi
-AC_SUBST(CC_FOR_BUILD)
-
-AC_SUBST(CFLAGS)
-AR=${AR-ar}
-AC_SUBST(AR)
-AC_PROG_RANLIB
-
-# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
-# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
-# is C99. So handle it ourselves.
-m4_version_prereq([2.70], [AC_MSG_ERROR([clean this up!])], [:])
-C_DIALECT=
-AC_MSG_CHECKING([whether C11 is supported by default])
-AC_COMPILE_IFELSE([AC_LANG_SOURCE([
-#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
-# error "C11 support not found"
-#endif
-])], [AC_MSG_RESULT([yes])], [
- AC_MSG_RESULT([no])
- AC_MSG_CHECKING([for -std=c11 support])
- ac_save_CC="$CC"
- CC="$CC -std=c11"
- AC_COMPILE_IFELSE([AC_LANG_SOURCE([
-#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
-# error "C11 support not found"
-#endif
-])], [
- AC_MSG_RESULT([yes])
- CC="$ac_save_CC"
- C_DIALECT="-std=c11"
-], [AC_MSG_ERROR([C11 is required])])])
-AC_SUBST(C_DIALECT)
-
-# Some of the common include files depend on bfd.h, and bfd.h checks
-# that config.h is included first by testing that the PACKAGE macro
-# is defined.
-PACKAGE=sim
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
-AC_SUBST(PACKAGE)
-
-# Dependency checking.
-ZW_CREATE_DEPDIR
-ZW_PROG_COMPILER_DEPENDENCIES([CC])
-
-# Check for the 'make' the user wants to use.
-AC_CHECK_PROGS(MAKE, make)
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
-AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
-
-dnl We don't use gettext, but bfd does. So we do the appropriate checks
-dnl to see if there are intl libraries we should link against.
-ALL_LINGUAS=
-ZW_GNU_GETTEXT_SISTER_DIR(../../intl)
-
-# Check for common headers.
-# NB: You can assume C11 headers exist.
-AC_CHECK_HEADERS(unistd.h)
-AC_CHECK_HEADERS(sys/time.h sys/times.h sys/resource.h sys/mman.h)
-AC_CHECK_HEADERS(fcntl.h fpu_control.h)
-AC_CHECK_HEADERS(dlfcn.h sys/stat.h)
-AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)
-AC_CHECK_FUNCS(mmap munmap lstat truncate ftruncate posix_fallocate)
-AC_CHECK_MEMBERS([[struct stat.st_dev], [struct stat.st_ino],
-[struct stat.st_mode], [struct stat.st_nlink], [struct stat.st_uid],
-[struct stat.st_gid], [struct stat.st_rdev], [struct stat.st_size],
-[struct stat.st_blksize], [struct stat.st_blocks], [struct stat.st_atime],
-[struct stat.st_mtime], [struct stat.st_ctime]], [], [],
-[[#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-#include <sys/stat.h>
-#endif]])
-AC_CHECK_TYPES(socklen_t, [], [],
-[#include <sys/types.h>
-#include <sys/socket.h>
-])
-
-# Check for socket libraries
-AC_CHECK_LIB(socket, bind)
-AC_CHECK_LIB(nsl, gethostbyname)
-
-# BFD conditionally uses zlib, so we must link it in if libbfd does, by
-# using the same condition.
-AM_ZLIB
-
-# BFD uses libdl when when plugins enabled.
-AC_PLUGINS
-AM_CONDITIONAL(PLUGINS, test "$plugins" = yes)
-LT_INIT([dlopen])
-AC_SUBST(lt_cv_dlopen_libs)
-
-dnl Standard (and optional) simulator options.
-dnl Eventually all simulators will support these.
-dnl Do not add any here that cannot be supported by all simulators.
-dnl Do not add similar but different options to a particular simulator,
-dnl all shall eventually behave the same way.
-
-
-dnl We don't use automake, but we still want to support
-dnl --enable-maintainer-mode.
-AM_MAINTAINER_MODE
-
-
-dnl --enable-sim-debug is for developers of the simulator
-dnl the allowable values are work-in-progress
-AC_MSG_CHECKING([for sim debug setting])
-sim_debug="0"
-AC_ARG_ENABLE(sim-debug,
-[AS_HELP_STRING([--enable-sim-debug=opts],
- [Enable debugging flags (for developers of the sim itself)])],
-[case "${enableval}" in
- yes) sim_debug="7";;
- no) sim_debug="0";;
- *) sim_debug="($enableval)";;
-esac])dnl
-if test "$sim_debug" != "0"; then
- AC_DEFINE_UNQUOTED([DEBUG], [$sim_debug], [Sim debug setting])
-fi
-AC_DEFINE_UNQUOTED([WITH_DEBUG], [$sim_debug], [Sim debug setting])
-AC_MSG_RESULT($sim_debug)
-
-
-dnl --enable-sim-stdio is for users of the simulator
-dnl It determines if IO from the program is routed through STDIO (buffered)
-AC_MSG_CHECKING([for sim stdio debug behavior])
-sim_stdio="0"
-AC_ARG_ENABLE(sim-stdio,
-[AS_HELP_STRING([--enable-sim-stdio],
- [Specify whether to use stdio for console input/output])],
-[case "${enableval}" in
- yes) sim_stdio="DO_USE_STDIO";;
- no) sim_stdio="DONT_USE_STDIO";;
- *) AC_MSG_ERROR([Unknown value $enableval passed to --enable-sim-stdio]);;
-esac])dnl
-AC_DEFINE_UNQUOTED([WITH_STDIO], [$sim_stdio], [How to route I/O])
-AC_MSG_RESULT($sim_stdio)
-
-
-dnl --enable-sim-trace is for users of the simulator
-dnl The argument is either a bitmask of things to enable [exactly what is
-dnl up to the simulator], or is a comma separated list of names of tracing
-dnl elements to enable. The latter is only supported on simulators that
-dnl use WITH_TRACE. Default to all tracing but internal debug.
-AC_MSG_CHECKING([for sim trace settings])
-sim_trace="~TRACE_debug"
-AC_ARG_ENABLE(sim-trace,
-[AS_HELP_STRING([--enable-sim-trace=opts],
- [Enable tracing of simulated programs])],
-[case "${enableval}" in
- yes) sim_trace="-1";;
- no) sim_trace="0";;
- [[-0-9]]*)
- sim_trace="'(${enableval})'";;
- [[[:lower:]]]*)
- sim_trace=""
- for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- if test x"$sim_trace" = x; then
- sim_trace="(TRACE_$x"
- else
- sim_trace="${sim_trace}|TRACE_$x"
- fi
- done
- sim_trace="$sim_trace)" ;;
-esac])dnl
-AC_DEFINE_UNQUOTED([WITH_TRACE], [$sim_trace], [Sim trace settings])
-AC_MSG_RESULT($sim_trace)
-
-
-dnl --enable-sim-profile
-dnl The argument is either a bitmask of things to enable [exactly what is
-dnl up to the simulator], or is a comma separated list of names of profiling
-dnl elements to enable. The latter is only supported on simulators that
-dnl use WITH_PROFILE.
-AC_MSG_CHECKING([for sim profile settings])
-profile="1"
-sim_profile="-1"
-AC_ARG_ENABLE(sim-profile,
-[AS_HELP_STRING([--enable-sim-profile=opts], [Enable profiling flags])],
-[case "${enableval}" in
- yes) profile="1" sim_profile="-1";;
- no) profile="0" sim_profile="0";;
- [[-0-9]]*)
- profile="(${enableval})" sim_profile="(${enableval})";;
- [[a-z]]*)
- profile="1"
- sim_profile=""
- for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- if test x"$sim_profile" = x; then
- sim_profile="(PROFILE_$x"
- else
- sim_profile="${sim_profile}|PROFILE_$x"
- fi
- done
- sim_profile="$sim_profile)" ;;
-esac])dnl
-AC_DEFINE_UNQUOTED([PROFILE], [$profile], [Sim profile settings])
-AC_DEFINE_UNQUOTED([WITH_PROFILE], [$sim_profile], [Sim profile settings])
-AC_MSG_RESULT($sim_profile)
-
-
-SIM_AC_OPTION_ASSERT
-SIM_AC_OPTION_ENVIRONMENT
-SIM_AC_OPTION_INLINE
-
-ACX_PKGVERSION([SIM])
-ACX_BUGURL([https://www.gnu.org/software/gdb/bugs/])
-AC_DEFINE_UNQUOTED([PKGVERSION], ["$PKGVERSION"], [Additional package description])
-AC_DEFINE_UNQUOTED([REPORT_BUGS_TO], ["$REPORT_BUGS_TO"], [Bug reporting address])
-
-dnl Types used by common code
-AC_TYPE_SIGNAL
-
-dnl Detect exe extension
-AC_EXEEXT
-
-]) dnl End of SIM_AC_COMMON
-
-
-dnl Additional SIM options that can (optionally) be configured
-dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
-dnl Simulators that wish to use the relevant option specify the macro
-dnl in the simulator specific configure.ac file between the SIM_AC_COMMON
-dnl and SIM_AC_OUTPUT lines.
-
-
-dnl Specify the running environment.
-dnl If the simulator invokes this in its configure.ac then without this option
-dnl the default is the user environment and all are runtime selectable.
-dnl If the simulator doesn't invoke this, only the user environment is
-dnl supported.
-dnl ??? Until there is demonstrable value in doing something more complicated,
-dnl let's not.
-AC_DEFUN([SIM_AC_OPTION_ENVIRONMENT],
-[
-AC_MSG_CHECKING([default sim environment setting])
-sim_environment="ALL_ENVIRONMENT"
-AC_ARG_ENABLE(sim-environment,
-[AS_HELP_STRING([--enable-sim-environment=environment],
- [Specify mixed, user, virtual or operating environment])],
-[case "${enableval}" in
- all | ALL) sim_environment="ALL_ENVIRONMENT";;
- user | USER) sim_environment="USER_ENVIRONMENT";;
- virtual | VIRTUAL) sim_environment="VIRTUAL_ENVIRONMENT";;
- operating | OPERATING) sim_environment="OPERATING_ENVIRONMENT";;
- *) AC_MSG_ERROR([Unknown value $enableval passed to --enable-sim-environment]);;
-esac])dnl
-AC_DEFINE_UNQUOTED([WITH_ENVIRONMENT], [$sim_environment], [Sim default environment])
-AC_MSG_RESULT($sim_environment)
-])
-
-
-dnl Specify the alignment restrictions of the target architecture.
-dnl Without this option all possible alignment restrictions are accommodated.
-dnl arg[1] is hardwired target alignment
-dnl arg[2] is default target alignment
-AC_DEFUN([SIM_AC_OPTION_ALIGNMENT],
-wire_alignment="[$1]"
-default_alignment="[$2]"
-[
-AC_ARG_ENABLE(sim-alignment,
-[AS_HELP_STRING([--enable-sim-alignment=align],
- [Specify strict, nonstrict or forced alignment of memory accesses])],
-[case "${enableval}" in
- strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
- nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
- forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
- yes) if test x"$wire_alignment" != x; then
- sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
- else
- if test x"$default_alignment" != x; then
- sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
- else
- echo "No hard-wired alignment for target $target" 1>&6
- sim_alignment="-DWITH_ALIGNMENT=0"
- fi
- fi;;
- no) if test x"$default_alignment" != x; then
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
- else
- if test x"$wire_alignment" != x; then
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
- else
- echo "No default alignment for target $target" 1>&6
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
- fi
- fi;;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
- echo "Setting alignment flags = $sim_alignment" 6>&1
-fi],
-[if test x"$default_alignment" != x; then
- sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
-else
- if test x"$wire_alignment" != x; then
- sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
- else
- sim_alignment=
- fi
-fi])dnl
-])dnl
-AC_SUBST(sim_alignment)
-
-
-dnl Conditionally compile in assertion statements.
-AC_DEFUN([SIM_AC_OPTION_ASSERT],
-[
-AC_MSG_CHECKING([whether to enable sim asserts])
-sim_assert="1"
-AC_ARG_ENABLE(sim-assert,
-[AS_HELP_STRING([--enable-sim-assert],
- [Specify whether to perform random assertions])],
-[case "${enableval}" in
- yes) sim_assert="1";;
- no) sim_assert="0";;
- *) AC_MSG_ERROR([--enable-sim-assert does not take a value]);;
-esac])dnl
-AC_DEFINE_UNQUOTED([WITH_ASSERT], [$sim_assert], [Sim assert settings])
-AC_MSG_RESULT($sim_assert)
-])
-
-
-
-dnl --enable-sim-bitsize is for developers of the simulator
-dnl It specifies the number of BITS in the target.
-dnl arg[1] is the number of bits in a word
-dnl arg[2] is the number assigned to the most significant bit
-dnl arg[3] is the number of bits in an address
-dnl arg[4] is the number of bits in an OpenFirmware cell.
-dnl FIXME: this information should be obtained from bfd/archure
-AC_DEFUN([SIM_AC_OPTION_BITSIZE],
-wire_word_bitsize="[$1]"
-wire_word_msb="[$2]"
-wire_address_bitsize="[$3]"
-wire_cell_bitsize="[$4]"
-[AC_ARG_ENABLE(sim-bitsize,
-[AS_HELP_STRING([--enable-sim-bitsize=N], [Specify target bitsize (32 or 64)])],
-[sim_bitsize=
-case "${enableval}" in
- 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
- 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
- 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
- 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
- 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
- else
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
- fi ;;
- 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
- else
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
- fi ;;
- *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64") ;;
-esac
-# address bitsize
-tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
-case x"${tmp}" in
- x ) ;;
- x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
- x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
- * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval. Expected 32 or 64") ;;
-esac
-# cell bitsize
-tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
-case x"${tmp}" in
- x ) ;;
- x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
- x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
- * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64") ;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
- echo "Setting bitsize flags = $sim_bitsize" 6>&1
-fi],
-[sim_bitsize=""
-if test x"$wire_word_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
-fi
-if test x"$wire_word_msb" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
-fi
-if test x"$wire_address_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
-fi
-if test x"$wire_cell_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
-fi])dnl
-])
-AC_SUBST(sim_bitsize)
-
-
-
-dnl --enable-sim-endian={yes,no,big,little} is for simulators
-dnl that support both big and little endian targets.
-dnl arg[1] is hardwired target endianness.
-dnl arg[2] is default target endianness.
-AC_DEFUN([SIM_AC_OPTION_ENDIAN],
-[
-wire_endian="[$1]"
-default_endian="[$2]"
-AC_ARG_ENABLE(sim-endian,
-[AS_HELP_STRING([--enable-sim-endian=endian],
- [Specify target byte endian orientation])],
-[case "${enableval}" in
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
- yes) if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- if test x"$default_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- echo "No hard-wired endian for target $target" 1>&6
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- no) if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
- else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- echo "No default endian for target $target" 1>&6
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
- fi
- fi;;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi],
-[if test x"$default_endian" != x; then
- sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
-else
- if test x"$wire_endian" != x; then
- sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
- else
- sim_endian=
- fi
-fi])dnl
-])
-AC_SUBST(sim_endian)
-
-
-dnl --enable-sim-float is for developers of the simulator
-dnl It specifies the presence of hardware floating point
-dnl And optionally the bitsize of the floating point register.
-dnl arg[1] specifies the presence (or absence) of floating point hardware
-dnl arg[2] specifies the number of bits in a floating point register
-AC_DEFUN([SIM_AC_OPTION_FLOAT],
-[
-default_sim_float="[$1]"
-default_sim_float_bitsize="[$2]"
-AC_ARG_ENABLE(sim-float,
-[AS_HELP_STRING([--enable-sim-float],
- [Specify that the target processor has floating point hardware])],
-[case "${enableval}" in
- yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
- no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
- 32) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
- 64) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
- echo "Setting float flags = $sim_float" 6>&1
-fi],[
-sim_float=
-if test x"${default_sim_float}" != x""; then
- sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
-fi
-if test x"${default_sim_float_bitsize}" != x""; then
- sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
-fi
-])dnl
-])
-AC_SUBST(sim_float)
-
-
-dnl The argument is the default cache size if none is specified.
-AC_DEFUN([SIM_AC_OPTION_SCACHE],
-[
-default_sim_scache="ifelse([$1],,0,[$1])"
-AC_ARG_ENABLE(sim-scache,
-[AS_HELP_STRING([--enable-sim-scache=size],
- [Specify simulator execution cache size])],
-[case "${enableval}" in
- yes) sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
- no) sim_scache="-DWITH_SCACHE=0" ;;
- [[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;
- *) AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
- sim_scache="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
- echo "Setting scache size = $sim_scache" 6>&1
-fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
-])
-AC_SUBST(sim_scache)
-
-
-dnl The argument is the default model if none is specified.
-AC_DEFUN([SIM_AC_OPTION_DEFAULT_MODEL],
-[
-default_sim_default_model="ifelse([$1],,0,[$1])"
-AC_ARG_ENABLE(sim-default-model,
-[AS_HELP_STRING([--enable-sim-default-model=model],
- [Specify default model to simulate])],
-[case "${enableval}" in
- yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;
- *) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
- echo "Setting default model = $sim_default_model" 6>&1
-fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
-])
-AC_SUBST(sim_default_model)
-
-
-dnl --enable-sim-hardware is for users of the simulator
-dnl arg[1] Enable sim-hw by default? ("yes" or "no")
-dnl arg[2] is a space separated list of devices that override the defaults
-dnl arg[3] is a space separated list of extra target specific devices.
-AC_DEFUN([SIM_AC_OPTION_HARDWARE],
-[
-if test "[$2]"; then
- hardware="[$2]"
-else
- hardware="cfi core pal glue"
-fi
-hardware="$hardware [$3]"
-
-sim_hw_cflags="-DWITH_HW=1"
-sim_hw="$hardware"
-sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
-
-AC_ARG_ENABLE(sim-hardware,
- [AS_HELP_STRING([--enable-sim-hardware=LIST],
- [Specify the hardware to be included in the build.])],
- ,[enable_sim_hardware="[$1]"])
-case ${enable_sim_hardware} in
- yes|no) ;;
- ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
- *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
-esac
-
-if test "$enable_sim_hardware" = no; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-else
- sim_hw_cflags="-DWITH_HW=1"
- # remove duplicates
- sim_hw=""
- sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
- for i in $hardware ; do
- case " $sim_hw " in
- *" $i "*) ;;
- *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
- esac
- done
- # mingw does not support sockser
- case ${host} in
- *mingw*) ;;
- *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device
- # that you instatiate. Instead, other code will call into it directly.
- # At some point, we should convert it over.
- sim_hw_objs="$sim_hw_objs dv-sockser.o"
- AC_DEFINE_UNQUOTED(
- [HAVE_DV_SOCKSER], 1, [Define if dv-sockser is usable.])
- ;;
- esac
- if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
- fi
- dnl Some devices require extra libraries.
- case " $hardware " in
- *" cfi "*) AC_CHECK_LIB(m, log2);;
- esac
-fi
-])
-AC_SUBST(sim_hw_cflags)
-AC_SUBST(sim_hw_objs)
-AC_SUBST(sim_hw)
-
-
-dnl --enable-sim-inline is for users that wish to ramp up the simulator's
-dnl performance by inlining functions.
-dnl Default sims to no inlining.
-AC_DEFUN([SIM_AC_OPTION_INLINE],
-[
-sim_inline="-DDEFAULT_INLINE=m4_ifblank([$1],[0],[$1])"
-AC_ARG_ENABLE(sim-inline,
-[AS_HELP_STRING([--enable-sim-inline=inlines],
- [Specify which functions should be inlined])],
-[sim_inline=""
-case "$enableval" in
- no) sim_inline="-DDEFAULT_INLINE=0";;
- 0) sim_inline="-DDEFAULT_INLINE=0";;
- yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
- 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
- *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- new_flag=""
- case "$x" in
- *_INLINE=*) new_flag="-D$x";;
- *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
- *_INLINE) new_flag="-D$x=ALL_C_INLINE";;
- *) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
- esac
- if test x"$sim_inline" = x""; then
- sim_inline="$new_flag"
- else
- sim_inline="$sim_inline $new_flag"
- fi
- done;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
- echo "Setting inline flags = $sim_inline" 6>&1
-fi])dnl
-])
-AC_SUBST(sim_inline)
-
-
-AC_DEFUN([SIM_AC_OPTION_RESERVED_BITS],
-[
-default_sim_reserved_bits="ifelse([$1],,1,[$1])"
-AC_ARG_ENABLE(sim-reserved-bits,
-[AS_HELP_STRING([--enable-sim-reserved-bits],
- [Specify whether to check reserved bits in instruction])],
-[case "${enableval}" in
- yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
- no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
- *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
- echo "Setting reserved flags = $sim_reserved_bits" 6>&1
-fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
-])
-AC_SUBST(sim_reserved_bits)
-
-
-AC_DEFUN([SIM_AC_OPTION_SMP],
-[
-AC_MSG_CHECKING([number of sim cpus to support])
-default_sim_smp="ifelse([$1],,5,[$1])"
-sim_smp="$default_sim_smp""
-AC_ARG_ENABLE(sim-smp,
-[AS_HELP_STRING([--enable-sim-smp=n],
- [Specify number of processors to configure for (default ${default_sim_smp})])],
-[case "${enableval}" in
- yes) sim_smp="5";;
- no) sim_smp="0";;
- *) sim_smp="$enableval";;
-esac])dnl
-sim_igen_smp="-N ${sim_smp}"
-AC_DEFINE_UNQUOTED([WITH_SMP], [$sim_smp], [Sim SMP settings])
-AC_MSG_RESULT($sim_smp)
-])
-
-
-AC_DEFUN([SIM_AC_OPTION_XOR_ENDIAN],
-[
-AC_MSG_CHECKING([for xor endian support])
-default_sim_xor_endian="ifelse([$1],,8,[$1])"
-sim_xor_endian="$default_sim_xor_endian"
-AC_ARG_ENABLE(sim-xor-endian,
-[AS_HELP_STRING([--enable-sim-xor-endian=n],
- [Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian})])],
-[case "${enableval}" in
- yes) sim_xor_endian="8";;
- no) sim_xor_endian="0";;
- *) sim_xor_endian="$enableval";;
-esac])dnl
-AC_DEFINE_UNQUOTED([WITH_XOR_ENDIAN], [$sim_xor_endian], [Sim XOR endian settings])
-AC_MSG_RESULT($sim_smp)
-])
-
-
-dnl --enable-build-warnings is for developers of the simulator.
-dnl it enables extra GCC specific warnings.
-dnl arg[1] Enable -Werror by default? ("yes" or "no")
-AC_DEFUN([SIM_AC_OPTION_WARNINGS],
-[
-AC_ARG_ENABLE(werror,
- AS_HELP_STRING([--enable-werror], [treat compile warnings as errors]),
- [case "${enableval}" in
- yes | y) ERROR_ON_WARNING="yes" ;;
- no | n) ERROR_ON_WARNING="no" ;;
- *) AC_MSG_ERROR(bad value ${enableval} for --enable-werror) ;;
- esac])
-
-# Enable -Werror by default when using gcc
-if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
- ERROR_ON_WARNING=yes
-fi
-
-WERROR_CFLAGS=""
-m4_if(m4_default([$1], [yes]), [yes], [dnl
- if test "${ERROR_ON_WARNING}" = yes ; then
- WERROR_CFLAGS="-Werror"
- fi
-])dnl
-
-build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
--Wpointer-sign \
--Wno-unused -Wunused-value -Wunused-function \
--Wno-switch -Wno-char-subscripts -Wmissing-prototypes
--Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
--Wold-style-declaration -Wold-style-definition"
-
-# Enable -Wno-format by default when using gcc on mingw since many
-# GCC versions complain about %I64.
-case "${host}" in
- *-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
- *) build_warnings="$build_warnings -Wformat-nonliteral" ;;
-esac
-
-AC_ARG_ENABLE(build-warnings,
-AS_HELP_STRING([--enable-build-warnings], [enable build-time compiler warnings if gcc is used]),
-[case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting compiler warning flags = $build_warnings" 6>&1
-fi])dnl
-AC_ARG_ENABLE(sim-build-warnings,
-AS_HELP_STRING([--enable-sim-build-warnings], [enable SIM specific build-time compiler warnings if gcc is used]),
-[case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
-fi])dnl
-WARN_CFLAGS=""
-if test "x${build_warnings}" != x -a "x$GCC" = xyes
-then
- AC_MSG_CHECKING(compiler warning flags)
- # Separate out the -Werror flag as some files just cannot be
- # compiled with it enabled.
- for w in ${build_warnings}; do
- case $w in
- -Werr*) WERROR_CFLAGS=-Werror ;;
- *) # Check that GCC accepts it
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $w"
- AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
- CFLAGS="$saved_CFLAGS"
- esac
- done
- AC_MSG_RESULT(${WARN_CFLAGS} ${WERROR_CFLAGS})
-fi
-])
-AC_SUBST(WARN_CFLAGS)
-AC_SUBST(WERROR_CFLAGS)
-
-
-dnl Generate the Makefile in a target specific directory.
-dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
-dnl so this is a cover macro to tuck the details away of how we cope.
-dnl We cope by having autoconf generate two files and then merge them into
-dnl one afterwards. The two pieces of the common fragment are inserted into
-dnl the target's fragment at the appropriate points.
-
-AC_DEFUN([SIM_AC_OUTPUT],
-[dnl
-AC_REQUIRE([SIM_AC_OPTION_WARNINGS])dnl
-
-dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
-cgen_breaks=""
-if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
-cgen_breaks="break cgen_rtx_error";
-fi
-AC_SUBST(cgen_breaks)
-AC_CONFIG_FILES(Makefile.sim:Makefile.in)
-AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)
-AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)
-AC_CONFIG_COMMANDS([Makefile],
-[echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
- -e '/^## COMMON_POST_/ r Makesim2.tmp' \
- <Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
-])
-AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])
-AC_OUTPUT
-])
-
-dnl --enable-cgen-maint support
-AC_DEFUN([SIM_AC_OPTION_CGEN_MAINT],
-[
-cgen_maint=no
-dnl Default is to use one in build tree.
-cgen=guile
-cgendir='$(srcdir)/../../cgen'
-dnl Having --enable-maintainer-mode take arguments is another way to go.
-dnl ??? One can argue --with is more appropriate if one wants to specify
-dnl a directory name, but what we're doing here is an enable/disable kind
-dnl of thing and specifying both --enable and --with is klunky.
-dnl If you reeely want this to be --with, go ahead and change it.
-AC_ARG_ENABLE(cgen-maint,
-[AS_HELP_STRING([--enable-cgen-maint[=DIR]], [build cgen generated files])],
-[case "${enableval}" in
- yes) cgen_maint=yes ;;
- no) cgen_maint=no ;;
- *)
- # Argument is a directory where cgen can be found. In some
- # future world cgen could be installable, but right now this
- # is not the case. Instead we assume the directory is a path
- # to the cgen source tree.
- cgen_maint=yes
- if test -r ${enableval}/iformat.scm; then
- # This looks like a cgen source tree.
- cgendir=${enableval}
- else
- AC_MSG_ERROR(${enableval} doesn't look like a cgen source tree)
- fi
- ;;
-esac])dnl
-dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
-if test x${cgen_maint} != xno ; then
- CGEN_MAINT=''
-else
- CGEN_MAINT='#'
-fi
-AC_SUBST(CGEN_MAINT)
-AC_SUBST(cgendir)
-AC_SUBST(cgen)
-])
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_float
+sim_bitsize
cgen_breaks
cgen
cgendir
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
+sim_scache
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
+sim_default_model
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
# For dv-rv and rvdummy.
for ac_header in sys/socket.h sys/select.h sys/param.h
do :
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian=""
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_endian
+sim_bitsize
+sim_alignment
cgen_breaks
READLINE
TERMCAP
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_alignment'
+sim_inline'
ac_subst_files=''
ac_user_opts='
enable_option_checking
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
SIM_AC_OPTION_WARNINGS(no)
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_float
+sim_bitsize
cgen_breaks
sim_trapdump
cgen
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
+sim_scache
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
+sim_default_model
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
PATH_SEPARATOR
SHELL
WERROR_CFLAGS
-WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_alignment'
+WARN_CFLAGS'
ac_subst_files=''
ac_user_opts='
enable_option_checking
-
-
-
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
if test -f "$ac_dir/install-sh"; then
dnl Process this file with autoconf to produce a configure script.
AC_INIT(table.h)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
AC_PROG_INSTALL
AC_PROG_CC
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_float
+sim_bitsize
cgen_breaks
cgen
cgendir
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
+sim_scache
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
+sim_default_model
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_float
+sim_bitsize
cgen_breaks
cgen
cgendir
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
+sim_scache
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
+sim_default_model
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_endian
+sim_bitsize
+sim_alignment
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_alignment'
+sim_inline'
ac_subst_files=''
ac_user_opts='
enable_option_checking
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_float
+sim_bitsize
cgen_breaks
sim_extra_cflags
traps_obj
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
+sim_scache
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
+sim_default_model
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl SIM_AC_COMMON invokes AC macros used by all simulators and by the common
+dnl directory. It is intended to be invoked before any target specific stuff.
+dnl SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
+dnl It is intended to be invoked last.
+dnl
+dnl See README-HACKING for more details.
+AC_DEFUN([SIM_AC_COMMON],
+[
+AC_REQUIRE([AC_PROG_CC])
+AC_CONFIG_HEADERS([config.h:config.in])
+AC_CANONICAL_SYSTEM
+AC_USE_SYSTEM_EXTENSIONS
+AC_C_BIGENDIAN
+AC_ARG_PROGRAM
+AC_PROG_INSTALL
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test -z "$CC_FOR_BUILD"; then
+ if test "x$cross_compiling" = "xno"; then
+ CC_FOR_BUILD='$(CC)'
+ else
+ CC_FOR_BUILD=gcc
+ fi
+fi
+AC_SUBST(CC_FOR_BUILD)
+
+AC_SUBST(CFLAGS)
+AR=${AR-ar}
+AC_SUBST(AR)
+AC_PROG_RANLIB
+
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+m4_version_prereq([2.70], [AC_MSG_ERROR([clean this up!])], [:])
+C_DIALECT=
+AC_MSG_CHECKING([whether C11 is supported by default])
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+])], [AC_MSG_RESULT([yes])], [
+ AC_MSG_RESULT([no])
+ AC_MSG_CHECKING([for -std=c11 support])
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+])], [
+ AC_MSG_RESULT([yes])
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+], [AC_MSG_ERROR([C11 is required])])])
+AC_SUBST(C_DIALECT)
+
+# Some of the common include files depend on bfd.h, and bfd.h checks
+# that config.h is included first by testing that the PACKAGE macro
+# is defined.
+PACKAGE=sim
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
+AC_SUBST(PACKAGE)
+
+# Dependency checking.
+ZW_CREATE_DEPDIR
+ZW_PROG_COMPILER_DEPENDENCIES([CC])
+
+# Check for the 'make' the user wants to use.
+AC_CHECK_PROGS(MAKE, make)
+MAKE_IS_GNU=
+case "`$MAKE --version 2>&1 | sed 1q`" in
+ *GNU*)
+ MAKE_IS_GNU=yes
+ ;;
+esac
+AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
+
+dnl We don't use gettext, but bfd does. So we do the appropriate checks
+dnl to see if there are intl libraries we should link against.
+ALL_LINGUAS=
+ZW_GNU_GETTEXT_SISTER_DIR(../../intl)
+
+# Check for common headers.
+# NB: You can assume C11 headers exist.
+AC_CHECK_HEADERS(unistd.h)
+AC_CHECK_HEADERS(sys/time.h sys/times.h sys/resource.h sys/mman.h)
+AC_CHECK_HEADERS(fcntl.h fpu_control.h)
+AC_CHECK_HEADERS(dlfcn.h sys/stat.h)
+AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)
+AC_CHECK_FUNCS(mmap munmap lstat truncate ftruncate posix_fallocate)
+AC_CHECK_MEMBERS([[struct stat.st_dev], [struct stat.st_ino],
+[struct stat.st_mode], [struct stat.st_nlink], [struct stat.st_uid],
+[struct stat.st_gid], [struct stat.st_rdev], [struct stat.st_size],
+[struct stat.st_blksize], [struct stat.st_blocks], [struct stat.st_atime],
+[struct stat.st_mtime], [struct stat.st_ctime]], [], [],
+[[#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif]])
+AC_CHECK_TYPES(socklen_t, [], [],
+[#include <sys/types.h>
+#include <sys/socket.h>
+])
+
+# Check for socket libraries
+AC_CHECK_LIB(socket, bind)
+AC_CHECK_LIB(nsl, gethostbyname)
+
+# BFD conditionally uses zlib, so we must link it in if libbfd does, by
+# using the same condition.
+AM_ZLIB
+
+# BFD uses libdl when when plugins enabled.
+AC_PLUGINS
+AM_CONDITIONAL(PLUGINS, test "$plugins" = yes)
+LT_INIT([dlopen])
+AC_SUBST(lt_cv_dlopen_libs)
+
+dnl Standard (and optional) simulator options.
+dnl Eventually all simulators will support these.
+dnl Do not add any here that cannot be supported by all simulators.
+dnl Do not add similar but different options to a particular simulator,
+dnl all shall eventually behave the same way.
+
+
+dnl We don't use automake, but we still want to support
+dnl --enable-maintainer-mode.
+AM_MAINTAINER_MODE
+
+
+dnl --enable-sim-debug is for developers of the simulator
+dnl the allowable values are work-in-progress
+AC_MSG_CHECKING([for sim debug setting])
+sim_debug="0"
+AC_ARG_ENABLE(sim-debug,
+[AS_HELP_STRING([--enable-sim-debug=opts],
+ [Enable debugging flags (for developers of the sim itself)])],
+[case "${enableval}" in
+ yes) sim_debug="7";;
+ no) sim_debug="0";;
+ *) sim_debug="($enableval)";;
+esac])dnl
+if test "$sim_debug" != "0"; then
+ AC_DEFINE_UNQUOTED([DEBUG], [$sim_debug], [Sim debug setting])
+fi
+AC_DEFINE_UNQUOTED([WITH_DEBUG], [$sim_debug], [Sim debug setting])
+AC_MSG_RESULT($sim_debug)
+
+
+dnl --enable-sim-stdio is for users of the simulator
+dnl It determines if IO from the program is routed through STDIO (buffered)
+AC_MSG_CHECKING([for sim stdio debug behavior])
+sim_stdio="0"
+AC_ARG_ENABLE(sim-stdio,
+[AS_HELP_STRING([--enable-sim-stdio],
+ [Specify whether to use stdio for console input/output])],
+[case "${enableval}" in
+ yes) sim_stdio="DO_USE_STDIO";;
+ no) sim_stdio="DONT_USE_STDIO";;
+ *) AC_MSG_ERROR([Unknown value $enableval passed to --enable-sim-stdio]);;
+esac])dnl
+AC_DEFINE_UNQUOTED([WITH_STDIO], [$sim_stdio], [How to route I/O])
+AC_MSG_RESULT($sim_stdio)
+
+
+dnl --enable-sim-trace is for users of the simulator
+dnl The argument is either a bitmask of things to enable [exactly what is
+dnl up to the simulator], or is a comma separated list of names of tracing
+dnl elements to enable. The latter is only supported on simulators that
+dnl use WITH_TRACE. Default to all tracing but internal debug.
+AC_MSG_CHECKING([for sim trace settings])
+sim_trace="~TRACE_debug"
+AC_ARG_ENABLE(sim-trace,
+[AS_HELP_STRING([--enable-sim-trace=opts],
+ [Enable tracing of simulated programs])],
+[case "${enableval}" in
+ yes) sim_trace="-1";;
+ no) sim_trace="0";;
+ [[-0-9]]*)
+ sim_trace="'(${enableval})'";;
+ [[[:lower:]]]*)
+ sim_trace=""
+ for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ if test x"$sim_trace" = x; then
+ sim_trace="(TRACE_$x"
+ else
+ sim_trace="${sim_trace}|TRACE_$x"
+ fi
+ done
+ sim_trace="$sim_trace)" ;;
+esac])dnl
+AC_DEFINE_UNQUOTED([WITH_TRACE], [$sim_trace], [Sim trace settings])
+AC_MSG_RESULT($sim_trace)
+
+
+dnl --enable-sim-profile
+dnl The argument is either a bitmask of things to enable [exactly what is
+dnl up to the simulator], or is a comma separated list of names of profiling
+dnl elements to enable. The latter is only supported on simulators that
+dnl use WITH_PROFILE.
+AC_MSG_CHECKING([for sim profile settings])
+profile="1"
+sim_profile="-1"
+AC_ARG_ENABLE(sim-profile,
+[AS_HELP_STRING([--enable-sim-profile=opts], [Enable profiling flags])],
+[case "${enableval}" in
+ yes) profile="1" sim_profile="-1";;
+ no) profile="0" sim_profile="0";;
+ [[-0-9]]*)
+ profile="(${enableval})" sim_profile="(${enableval})";;
+ [[a-z]]*)
+ profile="1"
+ sim_profile=""
+ for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ if test x"$sim_profile" = x; then
+ sim_profile="(PROFILE_$x"
+ else
+ sim_profile="${sim_profile}|PROFILE_$x"
+ fi
+ done
+ sim_profile="$sim_profile)" ;;
+esac])dnl
+AC_DEFINE_UNQUOTED([PROFILE], [$profile], [Sim profile settings])
+AC_DEFINE_UNQUOTED([WITH_PROFILE], [$sim_profile], [Sim profile settings])
+AC_MSG_RESULT($sim_profile)
+
+
+SIM_AC_OPTION_ASSERT
+SIM_AC_OPTION_ENVIRONMENT
+SIM_AC_OPTION_INLINE
+
+ACX_PKGVERSION([SIM])
+ACX_BUGURL([https://www.gnu.org/software/gdb/bugs/])
+AC_DEFINE_UNQUOTED([PKGVERSION], ["$PKGVERSION"], [Additional package description])
+AC_DEFINE_UNQUOTED([REPORT_BUGS_TO], ["$REPORT_BUGS_TO"], [Bug reporting address])
+
+dnl Types used by common code
+AC_TYPE_SIGNAL
+
+dnl Detect exe extension
+AC_EXEEXT
+]) dnl End of SIM_AC_COMMON
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl Specify the alignment restrictions of the target architecture.
+dnl Without this option all possible alignment restrictions are accommodated.
+dnl arg[1] is hardwired target alignment
+dnl arg[2] is default target alignment
+AC_DEFUN([SIM_AC_OPTION_ALIGNMENT],
+wire_alignment="[$1]"
+default_alignment="[$2]"
+[
+AC_ARG_ENABLE(sim-alignment,
+[AS_HELP_STRING([--enable-sim-alignment=align],
+ [Specify strict, nonstrict or forced alignment of memory accesses])],
+[case "${enableval}" in
+ strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+ nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+ forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
+ yes) if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+ else
+ if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
+ else
+ echo "No hard-wired alignment for target $target" 1>&6
+ sim_alignment="-DWITH_ALIGNMENT=0"
+ fi
+ fi;;
+ no) if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+ else
+ if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
+ else
+ echo "No default alignment for target $target" 1>&6
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
+ fi
+ fi;;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+ echo "Setting alignment flags = $sim_alignment" 6>&1
+fi],
+[if test x"$default_alignment" != x; then
+ sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+else
+ if test x"$wire_alignment" != x; then
+ sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+ else
+ sim_alignment=
+ fi
+fi])dnl
+])dnl
+AC_SUBST(sim_alignment)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl Conditionally compile in assertion statements.
+AC_DEFUN([SIM_AC_OPTION_ASSERT],
+[
+AC_MSG_CHECKING([whether to enable sim asserts])
+sim_assert="1"
+AC_ARG_ENABLE(sim-assert,
+[AS_HELP_STRING([--enable-sim-assert],
+ [Specify whether to perform random assertions])],
+[case "${enableval}" in
+ yes) sim_assert="1";;
+ no) sim_assert="0";;
+ *) AC_MSG_ERROR([--enable-sim-assert does not take a value]);;
+esac])dnl
+AC_DEFINE_UNQUOTED([WITH_ASSERT], [$sim_assert], [Sim assert settings])
+AC_MSG_RESULT($sim_assert)
+])
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-sim-bitsize is for developers of the simulator
+dnl It specifies the number of BITS in the target.
+dnl arg[1] is the number of bits in a word
+dnl arg[2] is the number assigned to the most significant bit
+dnl arg[3] is the number of bits in an address
+dnl arg[4] is the number of bits in an OpenFirmware cell.
+dnl FIXME: this information should be obtained from bfd/archure
+AC_DEFUN([SIM_AC_OPTION_BITSIZE],
+wire_word_bitsize="[$1]"
+wire_word_msb="[$2]"
+wire_address_bitsize="[$3]"
+wire_cell_bitsize="[$4]"
+[AC_ARG_ENABLE(sim-bitsize,
+[AS_HELP_STRING([--enable-sim-bitsize=N], [Specify target bitsize (32 or 64)])],
+[sim_bitsize=
+case "${enableval}" in
+ 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
+ 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
+ 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+ 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+ 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
+ else
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
+ fi ;;
+ 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
+ else
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
+ fi ;;
+ *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64") ;;
+esac
+# address bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
+case x"${tmp}" in
+ x ) ;;
+ x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
+ x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
+ * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval. Expected 32 or 64") ;;
+esac
+# cell bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
+case x"${tmp}" in
+ x ) ;;
+ x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
+ x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
+ * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64") ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
+ echo "Setting bitsize flags = $sim_bitsize" 6>&1
+fi],
+[sim_bitsize=""
+if test x"$wire_word_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
+fi
+if test x"$wire_word_msb" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
+fi
+if test x"$wire_address_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
+fi
+if test x"$wire_cell_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
+fi])dnl
+])
+AC_SUBST(sim_bitsize)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-cgen-maint support
+AC_DEFUN([SIM_AC_OPTION_CGEN_MAINT],
+[
+cgen_maint=no
+dnl Default is to use one in build tree.
+cgen=guile
+cgendir='$(srcdir)/../../cgen'
+dnl Having --enable-maintainer-mode take arguments is another way to go.
+dnl ??? One can argue --with is more appropriate if one wants to specify
+dnl a directory name, but what we're doing here is an enable/disable kind
+dnl of thing and specifying both --enable and --with is klunky.
+dnl If you reeely want this to be --with, go ahead and change it.
+AC_ARG_ENABLE(cgen-maint,
+[AS_HELP_STRING([--enable-cgen-maint[=DIR]], [build cgen generated files])],
+[case "${enableval}" in
+ yes) cgen_maint=yes ;;
+ no) cgen_maint=no ;;
+ *)
+ # Argument is a directory where cgen can be found. In some
+ # future world cgen could be installable, but right now this
+ # is not the case. Instead we assume the directory is a path
+ # to the cgen source tree.
+ cgen_maint=yes
+ if test -r ${enableval}/iformat.scm; then
+ # This looks like a cgen source tree.
+ cgendir=${enableval}
+ else
+ AC_MSG_ERROR(${enableval} doesn't look like a cgen source tree)
+ fi
+ ;;
+esac])dnl
+dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
+if test x${cgen_maint} != xno ; then
+ CGEN_MAINT=''
+else
+ CGEN_MAINT='#'
+fi
+AC_SUBST(CGEN_MAINT)
+AC_SUBST(cgendir)
+AC_SUBST(cgen)
+])
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl The argument is the default model if none is specified.
+AC_DEFUN([SIM_AC_OPTION_DEFAULT_MODEL],
+[
+default_sim_default_model="ifelse([$1],,0,[$1])"
+AC_ARG_ENABLE(sim-default-model,
+[AS_HELP_STRING([--enable-sim-default-model=model],
+ [Specify default model to simulate])],
+[case "${enableval}" in
+ yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;
+ *) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
+ echo "Setting default model = $sim_default_model" 6>&1
+fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
+])
+AC_SUBST(sim_default_model)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-sim-endian={yes,no,big,little} is for simulators
+dnl that support both big and little endian targets.
+dnl arg[1] is hardwired target endianness.
+dnl arg[2] is default target endianness.
+AC_DEFUN([SIM_AC_OPTION_ENDIAN],
+[
+wire_endian="[$1]"
+default_endian="[$2]"
+AC_ARG_ENABLE(sim-endian,
+[AS_HELP_STRING([--enable-sim-endian=endian],
+ [Specify target byte endian orientation])],
+[case "${enableval}" in
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
+ yes) if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
+ else
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
+ else
+ echo "No hard-wired endian for target $target" 1>&6
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
+ fi
+ fi;;
+ no) if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
+ else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
+ else
+ echo "No default endian for target $target" 1>&6
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
+ fi
+ fi;;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+ echo "Setting endian flags = $sim_endian" 6>&1
+fi],
+[if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
+else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
+ else
+ sim_endian=
+ fi
+fi])dnl
+])
+AC_SUBST(sim_endian)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl Additional SIM options that can (optionally) be configured
+dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
+dnl Simulators that wish to use the relevant option specify the macro
+dnl in the simulator specific configure.ac file between the SIM_AC_COMMON
+dnl and SIM_AC_OUTPUT lines.
+dnl
+dnl Specify the running environment.
+dnl If the simulator invokes this in its configure.ac then without this option
+dnl the default is the user environment and all are runtime selectable.
+dnl If the simulator doesn't invoke this, only the user environment is
+dnl supported.
+dnl ??? Until there is demonstrable value in doing something more complicated,
+dnl let's not.
+AC_DEFUN([SIM_AC_OPTION_ENVIRONMENT],
+[
+AC_MSG_CHECKING([default sim environment setting])
+sim_environment="ALL_ENVIRONMENT"
+AC_ARG_ENABLE(sim-environment,
+[AS_HELP_STRING([--enable-sim-environment=environment],
+ [Specify mixed, user, virtual or operating environment])],
+[case "${enableval}" in
+ all | ALL) sim_environment="ALL_ENVIRONMENT";;
+ user | USER) sim_environment="USER_ENVIRONMENT";;
+ virtual | VIRTUAL) sim_environment="VIRTUAL_ENVIRONMENT";;
+ operating | OPERATING) sim_environment="OPERATING_ENVIRONMENT";;
+ *) AC_MSG_ERROR([Unknown value $enableval passed to --enable-sim-environment]);;
+esac])dnl
+AC_DEFINE_UNQUOTED([WITH_ENVIRONMENT], [$sim_environment], [Sim default environment])
+AC_MSG_RESULT($sim_environment)
+])
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-sim-float is for developers of the simulator
+dnl It specifies the presence of hardware floating point
+dnl And optionally the bitsize of the floating point register.
+dnl arg[1] specifies the presence (or absence) of floating point hardware
+dnl arg[2] specifies the number of bits in a floating point register
+AC_DEFUN([SIM_AC_OPTION_FLOAT],
+[
+default_sim_float="[$1]"
+default_sim_float_bitsize="[$2]"
+AC_ARG_ENABLE(sim-float,
+[AS_HELP_STRING([--enable-sim-float],
+ [Specify that the target processor has floating point hardware])],
+[case "${enableval}" in
+ yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
+ no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
+ 32) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
+ 64) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
+ echo "Setting float flags = $sim_float" 6>&1
+fi],[
+sim_float=
+if test x"${default_sim_float}" != x""; then
+ sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
+fi
+if test x"${default_sim_float_bitsize}" != x""; then
+ sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
+fi
+])dnl
+])
+AC_SUBST(sim_float)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-sim-hardware is for users of the simulator
+dnl arg[1] Enable sim-hw by default? ("yes" or "no")
+dnl arg[2] is a space separated list of devices that override the defaults
+dnl arg[3] is a space separated list of extra target specific devices.
+AC_DEFUN([SIM_AC_OPTION_HARDWARE],
+[
+if test "[$2]"; then
+ hardware="[$2]"
+else
+ hardware="cfi core pal glue"
+fi
+hardware="$hardware [$3]"
+
+sim_hw_cflags="-DWITH_HW=1"
+sim_hw="$hardware"
+sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
+
+AC_ARG_ENABLE(sim-hardware,
+ [AS_HELP_STRING([--enable-sim-hardware=LIST],
+ [Specify the hardware to be included in the build.])],
+ ,[enable_sim_hardware="[$1]"])
+case ${enable_sim_hardware} in
+ yes|no) ;;
+ ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
+ *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
+ *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+esac
+
+if test "$enable_sim_hardware" = no; then
+ sim_hw_objs=
+ sim_hw_cflags="-DWITH_HW=0"
+ sim_hw=
+else
+ sim_hw_cflags="-DWITH_HW=1"
+ # remove duplicates
+ sim_hw=""
+ sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
+ for i in $hardware ; do
+ case " $sim_hw " in
+ *" $i "*) ;;
+ *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
+ esac
+ done
+ # mingw does not support sockser
+ case ${host} in
+ *mingw*) ;;
+ *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device
+ # that you instatiate. Instead, other code will call into it directly.
+ # At some point, we should convert it over.
+ sim_hw_objs="$sim_hw_objs dv-sockser.o"
+ AC_DEFINE_UNQUOTED(
+ [HAVE_DV_SOCKSER], 1, [Define if dv-sockser is usable.])
+ ;;
+ esac
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ dnl Some devices require extra libraries.
+ case " $hardware " in
+ *" cfi "*) AC_CHECK_LIB(m, log2);;
+ esac
+fi
+])
+AC_SUBST(sim_hw_cflags)
+AC_SUBST(sim_hw_objs)
+AC_SUBST(sim_hw)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-sim-inline is for users that wish to ramp up the simulator's
+dnl performance by inlining functions.
+dnl Default sims to no inlining.
+AC_DEFUN([SIM_AC_OPTION_INLINE],
+[
+sim_inline="-DDEFAULT_INLINE=m4_ifblank([$1],[0],[$1])"
+AC_ARG_ENABLE(sim-inline,
+[AS_HELP_STRING([--enable-sim-inline=inlines],
+ [Specify which functions should be inlined])],
+[sim_inline=""
+case "$enableval" in
+ no) sim_inline="-DDEFAULT_INLINE=0";;
+ 0) sim_inline="-DDEFAULT_INLINE=0";;
+ yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
+ 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
+ *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ new_flag=""
+ case "$x" in
+ *_INLINE=*) new_flag="-D$x";;
+ *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
+ *_INLINE) new_flag="-D$x=ALL_C_INLINE";;
+ *) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
+ esac
+ if test x"$sim_inline" = x""; then
+ sim_inline="$new_flag"
+ else
+ sim_inline="$sim_inline $new_flag"
+ fi
+ done;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
+ echo "Setting inline flags = $sim_inline" 6>&1
+fi])dnl
+])
+AC_SUBST(sim_inline)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+AC_DEFUN([SIM_AC_OPTION_RESERVED_BITS],
+[
+default_sim_reserved_bits="ifelse([$1],,1,[$1])"
+AC_ARG_ENABLE(sim-reserved-bits,
+[AS_HELP_STRING([--enable-sim-reserved-bits],
+ [Specify whether to check reserved bits in instruction])],
+[case "${enableval}" in
+ yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
+ no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
+ *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
+ echo "Setting reserved flags = $sim_reserved_bits" 6>&1
+fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
+])
+AC_SUBST(sim_reserved_bits)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl The argument is the default cache size if none is specified.
+AC_DEFUN([SIM_AC_OPTION_SCACHE],
+[
+default_sim_scache="ifelse([$1],,0,[$1])"
+AC_ARG_ENABLE(sim-scache,
+[AS_HELP_STRING([--enable-sim-scache=size],
+ [Specify simulator execution cache size])],
+[case "${enableval}" in
+ yes) sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
+ no) sim_scache="-DWITH_SCACHE=0" ;;
+ [[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;
+ *) AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
+ sim_scache="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
+ echo "Setting scache size = $sim_scache" 6>&1
+fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
+])
+AC_SUBST(sim_scache)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+AC_DEFUN([SIM_AC_OPTION_SMP],
+[
+AC_MSG_CHECKING([number of sim cpus to support])
+default_sim_smp="ifelse([$1],,5,[$1])"
+sim_smp="$default_sim_smp""
+AC_ARG_ENABLE(sim-smp,
+[AS_HELP_STRING([--enable-sim-smp=n],
+ [Specify number of processors to configure for (default ${default_sim_smp})])],
+[case "${enableval}" in
+ yes) sim_smp="5";;
+ no) sim_smp="0";;
+ *) sim_smp="$enableval";;
+esac])dnl
+sim_igen_smp="-N ${sim_smp}"
+AC_DEFINE_UNQUOTED([WITH_SMP], [$sim_smp], [Sim SMP settings])
+AC_MSG_RESULT($sim_smp)
+])
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl --enable-build-warnings is for developers of the simulator.
+dnl it enables extra GCC specific warnings.
+dnl arg[1] Enable -Werror by default? ("yes" or "no")
+AC_DEFUN([SIM_AC_OPTION_WARNINGS],
+[
+AC_ARG_ENABLE(werror,
+ AS_HELP_STRING([--enable-werror], [treat compile warnings as errors]),
+ [case "${enableval}" in
+ yes | y) ERROR_ON_WARNING="yes" ;;
+ no | n) ERROR_ON_WARNING="no" ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for --enable-werror) ;;
+ esac])
+
+# Enable -Werror by default when using gcc
+if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
+ ERROR_ON_WARNING=yes
+fi
+
+WERROR_CFLAGS=""
+m4_if(m4_default([$1], [yes]), [yes], [dnl
+ if test "${ERROR_ON_WARNING}" = yes ; then
+ WERROR_CFLAGS="-Werror"
+ fi
+])dnl
+
+build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
+-Wpointer-sign \
+-Wno-unused -Wunused-value -Wunused-function \
+-Wno-switch -Wno-char-subscripts -Wmissing-prototypes
+-Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
+-Wold-style-declaration -Wold-style-definition"
+
+# Enable -Wno-format by default when using gcc on mingw since many
+# GCC versions complain about %I64.
+case "${host}" in
+ *-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
+ *) build_warnings="$build_warnings -Wformat-nonliteral" ;;
+esac
+
+AC_ARG_ENABLE(build-warnings,
+AS_HELP_STRING([--enable-build-warnings], [enable build-time compiler warnings if gcc is used]),
+[case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting compiler warning flags = $build_warnings" 6>&1
+fi])dnl
+AC_ARG_ENABLE(sim-build-warnings,
+AS_HELP_STRING([--enable-sim-build-warnings], [enable SIM specific build-time compiler warnings if gcc is used]),
+[case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
+fi])dnl
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+ AC_MSG_CHECKING(compiler warning flags)
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) # Check that GCC accepts it
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $w"
+ AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
+ CFLAGS="$saved_CFLAGS"
+ esac
+ done
+ AC_MSG_RESULT(${WARN_CFLAGS} ${WERROR_CFLAGS})
+fi
+])
+AC_SUBST(WARN_CFLAGS)
+AC_SUBST(WERROR_CFLAGS)
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+AC_DEFUN([SIM_AC_OPTION_XOR_ENDIAN],
+[
+AC_MSG_CHECKING([for xor endian support])
+default_sim_xor_endian="ifelse([$1],,8,[$1])"
+sim_xor_endian="$default_sim_xor_endian"
+AC_ARG_ENABLE(sim-xor-endian,
+[AS_HELP_STRING([--enable-sim-xor-endian=n],
+ [Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian})])],
+[case "${enableval}" in
+ yes) sim_xor_endian="8";;
+ no) sim_xor_endian="0";;
+ *) sim_xor_endian="$enableval";;
+esac])dnl
+AC_DEFINE_UNQUOTED([WITH_XOR_ENDIAN], [$sim_xor_endian], [Sim XOR endian settings])
+AC_MSG_RESULT($sim_smp)
+])
--- /dev/null
+dnl Copyright (C) 1997-2021 Free Software Foundation, Inc.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 3 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
+dnl
+dnl Generate the Makefile in a target specific directory.
+dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
+dnl so this is a cover macro to tuck the details away of how we cope.
+dnl We cope by having autoconf generate two files and then merge them into
+dnl one afterwards. The two pieces of the common fragment are inserted into
+dnl the target's fragment at the appropriate points.
+AC_DEFUN([SIM_AC_OUTPUT],
+[dnl
+AC_REQUIRE([SIM_AC_OPTION_WARNINGS])dnl
+
+dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
+cgen_breaks=""
+if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
+cgen_breaks="break cgen_rtx_error";
+fi
+AC_SUBST(cgen_breaks)
+AC_CONFIG_FILES(Makefile.sim:Makefile.in)
+AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)
+AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)
+AC_CONFIG_COMMANDS([Makefile],
+[echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ -e '/^## COMMON_POST_/ r Makesim2.tmp' \
+ <Makefile.sim >Makefile
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
+])
+AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])
+
+dnl These are unfortunate. They are conditionally called by other sim macros
+dnl but always used by common/Make-common.in. So we have to subst here even
+dnl when the rest of the code is in the respective macros.
+AC_SUBST(sim_alignment)
+AC_SUBST(sim_bitsize)
+AC_SUBST(sim_endian)
+AC_SUBST(sim_float)
+AC_SUBST(sim_scache)
+AC_SUBST(sim_default_model)
+AC_SUBST(sim_hw_cflags)
+AC_SUBST(sim_hw_objs)
+AC_SUBST(sim_hw)
+AC_SUBST(sim_reserved_bits)
+
+AC_OUTPUT
+])
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian=""
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian=""
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_bitsize.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_float.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_reserved_bits.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_default_model
+sim_scache
cgen_breaks
mips_extra_libs
XMKMF
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
sim_float
sim_endian
sim_bitsize
-
wire_alignment="NONSTRICT_ALIGNMENT"
default_alignment=""
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_bitsize.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_hardware.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_reserved_bits.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_default_model
+sim_scache
+sim_float
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
sim_hw
sim_hw_objs
sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
sim_bitsize
sim_alignment'
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
DTC
REPORT_BUGS_TEXI
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}dtc", so it can be a program name with args.
set dummy ${ac_tool_prefix}dtc; ac_word=$2
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
for ac_header in getopt.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "getopt.h" "ac_cv_header_getopt_h" "$ac_includes_default"
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_bitsize.m4])
+m4_include([../m4/sim_ac_option_cgen_maint.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_scache.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_float
cgen_breaks
cgen
cgendir
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
sim_scache
-sim_float
+sim_inline
sim_endian
+sim_default_model
sim_bitsize
sim_alignment'
ac_subst_files=''
-
wire_endian="BIG"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../.. ../../config])
AC_PROG_INSTALL
AC_PROG_CC
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_bitsize.m4])
+m4_include([../m4/sim_ac_option_default_model.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_scache
+sim_float
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
+sim_default_model
sim_bitsize
sim_alignment'
ac_subst_files=''
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_endian
+sim_bitsize
+sim_alignment
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_alignment'
+sim_inline'
ac_subst_files=''
ac_user_opts='
enable_option_checking
-
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
SIM_AC_OPTION_WARNINGS(no)
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* trace.c (load_file_and_line): Use fread return value to index
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_endian
+sim_bitsize
+sim_alignment
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
-sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
-sim_endian
-sim_bitsize
-sim_alignment'
+sim_inline'
ac_subst_files=''
ac_user_opts='
enable_option_checking
-
for ac_header in getopt.h
do :
ac_fn_c_check_header_mongrel "$LINENO" "getopt.h" "ac_cv_header_getopt_h" "$ac_includes_default"
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_reserved_bits
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_bitsize
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
SHELL
WERROR_CFLAGS
WARN_CFLAGS
-sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
-sim_bitsize
sim_alignment'
ac_subst_files=''
ac_user_opts='
-
wire_endian=""
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
+2021-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4.
+ * aclocal.m4, configure: Regenerate.
+
2021-02-13 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../m4/sim_ac_common.m4])
+m4_include([../m4/sim_ac_option_alignment.m4])
+m4_include([../m4/sim_ac_option_assert.m4])
+m4_include([../m4/sim_ac_option_bitsize.m4])
+m4_include([../m4/sim_ac_option_endian.m4])
+m4_include([../m4/sim_ac_option_environment.m4])
+m4_include([../m4/sim_ac_option_inline.m4])
+m4_include([../m4/sim_ac_option_reserved_bits.m4])
+m4_include([../m4/sim_ac_option_warnings.m4])
+m4_include([../m4/sim_ac_output.m4])
m4_include([../../config/acx.m4])
m4_include([../../config/depstand.m4])
m4_include([../../config/gettext-sister.m4])
m4_include([../../ltsugar.m4])
m4_include([../../ltversion.m4])
m4_include([../../lt~obsolete.m4])
-m4_include([../common/acinclude.m4])
ac_subst_vars='LTLIBOBJS
LIBOBJS
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
cgen_breaks
REPORT_BUGS_TEXI
REPORT_BUGS_TO
WARN_CFLAGS
sim_reserved_bits
sim_inline
-sim_hw
-sim_hw_objs
-sim_hw_cflags
-sim_default_model
-sim_scache
-sim_float
sim_endian
sim_bitsize
sim_alignment'
-
wire_endian="LITTLE"
default_endian=""
# Check whether --enable-sim-endian was given.
ac_config_commands="$ac_config_commands stamp-h"
+
+
+
+
+
+
+
+
+
+
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
dnl Process this file with autoconf to produce a configure script.
AC_INIT(Makefile.in)
-AC_CONFIG_MACRO_DIRS([../common ../.. ../../config])
+AC_CONFIG_MACRO_DIRS([../m4 ../.. ../../config])
SIM_AC_COMMON
projects / binutils-gdb.git / commitdiff