sim: microblaze: move arch-specific settings to internal header

There's no need for these settings to be in sim-main.h which is shared
with common/ sim code, so move it all out to a new header which only
this port will include.

diff --git a/sim/microblaze/interp.c b/sim/microblaze/interp.c
index 3d7fde0af3e37fbe1e7d51a07f3769c947c86230..8a8cb9f2b83259db562c7c750587b00cb4d74454 100644 (file)
--- a/sim/microblaze/interp.c
+++ b/sim/microblaze/interp.c
@@ -33,6 +33,7 @@
 #include "sim-signal.h"
 #include "sim-syscall.h"
 
+#include "microblaze-sim.h"
 #include "microblaze-dis.h"
 
 #define target_big_endian (CURRENT_TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)

diff --git a/sim/microblaze/microblaze-sim.h b/sim/microblaze/microblaze-sim.h
new file mode 100644 (file)
index 0000000..9e5fb07
--- /dev/null
+++ b/sim/microblaze/microblaze-sim.h
@@ -0,0 +1,46 @@
+/* Copyright 2009-2022 Free Software Foundation, Inc.
+
+   This file is part of the Xilinx MicroBlaze simulator.
+
+   This library is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef MICROBLAZE_SIM_H
+#define MICROBLAZE_SIM_H
+
+#include "microblaze.h"
+
+/* The machine state.
+   This state is maintained in host byte order.  The
+   fetch/store register functions must translate between host
+   byte order and the target processor byte order.
+   Keeping this data in target byte order simplifies the register
+   read/write functions.  Keeping this data in native order improves
+   the performance of the simulator.  Simulation speed is deemed more
+   important.  */
+
+/* The ordering of the microblaze_regset structure is matched in the
+   gdb/config/microblaze/tm-microblaze.h file in the REGISTER_NAMES macro.  */
+ struct microblaze_regset
+{
+  signed_4     regs[32];               /* primary registers */
+  signed_4     spregs[2];              /* pc + msr */
+  int          cycles;
+  int          insts;
+  unsigned_1   imm_enable;
+  signed_2     imm_high;
+};
+
+#define MICROBLAZE_SIM_CPU(cpu) ((struct microblaze_regset *) CPU_ARCH_DATA (cpu))
+
+#endif /* MICROBLAZE_SIM_H */

diff --git a/sim/microblaze/sim-main.h b/sim/microblaze/sim-main.h
index 160f10156fff862d6a1173e196ed59407f8fc0cd..7646dad044fe782b925e397ba0be4b5cde1bdd4b 100644 (file)
--- a/sim/microblaze/sim-main.h
+++ b/sim/microblaze/sim-main.h
@@ -18,31 +18,7 @@
 #ifndef MICROBLAZE_SIM_MAIN
 #define MICROBLAZE_SIM_MAIN
 
-#include "microblaze.h"
 #include "sim-basics.h"
 #include "sim-base.h"
 
-/* The machine state.
-   This state is maintained in host byte order.  The
-   fetch/store register functions must translate between host
-   byte order and the target processor byte order.
-   Keeping this data in target byte order simplifies the register
-   read/write functions.  Keeping this data in native order improves
-   the performance of the simulator.  Simulation speed is deemed more
-   important.  */
-
-/* The ordering of the microblaze_regset structure is matched in the
-   gdb/config/microblaze/tm-microblaze.h file in the REGISTER_NAMES macro.  */
- struct microblaze_regset
-{
-  signed_4     regs[32];               /* primary registers */
-  signed_4     spregs[2];              /* pc + msr */
-  int          cycles;
-  int          insts;
-  unsigned_1   imm_enable;
-  signed_2     imm_high;
-};
-
-#define MICROBLAZE_SIM_CPU(cpu) ((struct microblaze_regset *) CPU_ARCH_DATA (cpu))
-
 #endif /* MICROBLAZE_SIM_MAIN */