Breakpoints work, run works. Fixed "monitor" command.

diff --git a/gdb/monitor.c b/gdb/monitor.c
index 748a4190dbc185ef4da656ccd45f3c7d2cdf92aa..bd0709dea59500a1b7ca63f975fa0590ca4657d7 100644 (file)
--- a/gdb/monitor.c
+++ b/gdb/monitor.c
@@ -128,8 +128,9 @@ printf_monitor(va_alist)
     fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
 }
 
-/* Read a character from the remote system, doing all the fancy
-   timeout stuff.  */
+/* readchar -- read a character from the remote system, doing all the fancy
+ *     timeout stuff.
+ */
 static int
 readchar(timeout)
      int timeout;
@@ -138,7 +139,7 @@ readchar(timeout)
 
   c = SERIAL_READCHAR(monitor_desc, timeout);
 
-  if (sr_get_debug())
+  if (sr_get_debug() > 5)
     putchar(c & 0x7f);
 
 #ifdef LOG_FILE
@@ -149,20 +150,19 @@ readchar(timeout)
   if (c >= 0)
     return c & 0x7f;
 
-  if (c == SERIAL_TIMEOUT)
-    {
-      if (timeout == 0)
-       return c;               /* Polls shouldn't generate timeout errors */
-
-      error("Timeout reading from remote system.");
-    }
-
+  if (c == SERIAL_TIMEOUT) {
+    if (timeout == 0)
+      return c;                /* Polls shouldn't generate timeout errors */
+    error("Timeout reading from remote system.");
+  }
   perror_with_name("remote-monitor");
 }
 
-/* Scan input from the remote system, until STRING is found.  If DISCARD is
-   non-zero, then discard non-matching input, else print it out.
-   Let the user break out immediately.  */
+/* 
+ * expect --  scan input from the remote system, until STRING is found.
+ *     If DISCARD is non-zero, then discard non-matching input, else print
+ *     it out. Let the user break out immediately.
+ */
 static void
 expect (string, discard)
      char *string;
@@ -363,9 +363,10 @@ monitor_create_inferior (execfile, args, env)
   proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
 }
 
-/* Open a connection to a remote debugger.
-   NAME is the filename used for communication.  */
-
+/*
+ * monitor_open -- open a connection to a remote debugger.
+ *     NAME is the filename used for communication.
+ */
 static int baudrate = 9600;
 static char dev_name[100];
 
@@ -421,7 +422,8 @@ monitor_open(args, name, from_tty)
 }
 
 /*
- * _close -- Close out all files and local state before this target loses control.
+ * monitor_close -- Close out all files and local state before this
+ *     target loses control.
  */
 
 void
@@ -431,6 +433,9 @@ monitor_close (quitting)
   SERIAL_CLOSE(monitor_desc);
   monitor_desc = NULL;
 
+  if (sr_get_debug() > 4)
+    puts ("\nmonitor_close ()");
+
 #if defined (LOG_FILE)
   if (log_file) {
     if (ferror(log_file))
@@ -441,20 +446,49 @@ monitor_close (quitting)
 #endif
 }
 
-/* Terminate the open connection to the remote debugger.
-   Use this when you want to detach and do something else
-   with your gdb.  */
+/* 
+ * monitor_detach -- terminate the open connection to the remote
+ *     debugger. Use this when you want to detach and do something
+ *     else with your gdb.
+ */
 void
 monitor_detach (from_tty)
      int from_tty;
 {
+#ifdef LOG_FILE
+  fprintf (log_file, "\nmonitor_detach ()\n");
+#endif
+
   pop_target();                /* calls monitor_close to do the real work */
   if (from_tty)
     printf ("Ending remote %s debugging\n", target_shortname);
 }
+
+/*
+ * monitor_attach -- attach GDB to the target.
+ */
+void
+monitor_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (from_tty)
+    printf ("Starting remote %s debugging\n", target_shortname);
  
+#ifdef LOG_FILE
+  fprintf (log_file, "\nmonitor_attach (args=%s)\n", args);
+#endif
+  
+  if (sr_get_debug() > 4)
+    printf ("\nmonitor_attach (args=%s)\n", args);
+
+  printf_monitor (GO_CMD);
+  /* swallow the echo.  */
+  expect (GO_CMD, 1);
+}
+  
 /*
- * _resume -- Tell the remote machine to resume.
+ * monitor_resume -- Tell the remote machine to resume.
  */
 void
 monitor_resume (pid, step, sig)
@@ -462,21 +496,21 @@ monitor_resume (pid, step, sig)
      enum target_signal sig;
 {
 #ifdef LOG_FILE
-  fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig);
+  fprintf (log_file, "\nmonitor_resume (step=%d, sig=%d)\n", step, sig);
 #endif
 
-  if (step)
-    {
-      printf_monitor (STEP_CMD);
-      /* wait for the echo.  */
-      expect (STEP_CMD, 1);
-    }
-  else
-    {
-      printf_monitor (GO_CMD);
-      /* swallow the echo.  */
-      expect (GO_CMD, 1);
-    }
+  if (sr_get_debug() > 4)
+    printf ("\nmonitor_resume (step=%d, sig=%d)\n", step, sig);
+
+  if (step) {
+    printf_monitor (STEP_CMD);
+    /* wait for the echo.  */
+    expect (STEP_CMD, 1);
+  } else {
+    printf_monitor (CONT_CMD);
+    /* swallow the echo.  */
+    expect (CONT_CMD, 1);
+  }
 }
 
 /*
@@ -879,19 +913,22 @@ monitor_remove_breakpoint (addr, shadow)
 #ifdef LOG_FILE
   fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr);
 #endif
-  for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
-    if (breakaddr[i] == addr)
-      {
-       breakaddr[i] = 0;
-       /* some monitors remove breakpoints based on the address */
-       if (strcasecmp (target_shortname, "bug") == 0)   
-           printf_monitor(CLR_BREAK_CMD, addr);
-         else
-           printf_monitor(CLR_BREAK_CMD, i);
-       expect_prompt(1);
-       return 0;
-      }
 
+  if (sr_get_debug() > 4)
+    printf ("remove_breakpoint (addr=%x)\n", addr);
+
+  for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++) {
+    if (breakaddr[i] == addr) {
+      breakaddr[i] = 0;
+      /* some monitors remove breakpoints based on the address */
+      if (CLR_BREAK_ADDR)   
+       printf_monitor(CLR_BREAK_CMD, addr);
+      else
+       printf_monitor(CLR_BREAK_CMD, i);
+      expect_prompt(1);
+      return 0;
+    }
+  }
   fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
   return 1;
 }
@@ -953,24 +990,36 @@ monitor_load (arg)
   fclose (download);
 }
 
-/* Put a command string, in args, out to MONITOR.  Output from MONITOR is placed
-   on the users terminal until the prompt is seen. */
-
+/* 
+ * monitor_command -- put a command string, in args, out to MONITOR.
+ *     Output from MONITOR is placed on the users terminal until the
+ *     prompt is seen. FIXME: We read the charcters ourseleves here
+ *     cause of a nasty echo.
+ */
 void
 monitor_command (args, fromtty)
      char      *args;
      int       fromtty;
 {
+
+  char *p;
+  char c, cp;
+  p = PROMPT;
+
 #ifdef LOG_FILE
-  fprintf (log_file, "\nIn command (args=%s)\n", args);
+  fprintf (log_file, "\nmonitor_command (args=%s)\n", args);
 #endif
   if (monitor_desc == NULL)
     error("monitor target not open.");
-  
+
   if (!args)
     error("Missing command.");
        
-  printf_monitor("%s\r", args);
+  if (sr_get_debug() > 4)
+    printf ("monitor_command (args=%s)\n", args);
+
+  printf_monitor ("%s\n", args);
+
   expect_prompt(0);
 }
 

diff --git a/gdb/monitor.h b/gdb/monitor.h
index 29751c15919614239a9efca6f982be4fdf1e13fc..b3ed53219ae72f433a8c93b9ef5e6ac79e5cde85 100644 (file)
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -36,6 +36,7 @@ struct monitor_ops {
   char *step;                  /* single step */
   char *set_break;             /* set a breakpoint */
   char *clr_break;             /* clear a breakpoint */
+  int  clr_type;               /* number or address for clearing */
   struct rom_cmd_data setmem;  /* set memory to a value */
   struct rom_cmd_data getmem;  /* display memory */
   struct rom_cmd_data regset;  /* set a register */
@@ -59,6 +60,7 @@ extern struct monitor_ops        *current_monitor;
 #define STEP_CMD               (current_monitor->step)
 #define SET_BREAK_CMD          (current_monitor->set_break)
 #define CLR_BREAK_CMD          (current_monitor->clr_break)
+#define CLR_BREAK_ADDR         (current_monitor->clr_type)
 #define SET_MEM                        (current_monitor->setmem)
 #define GET_MEM                        (current_monitor->getmem)
 #define LOAD_CMD               (current_monitor->load)
@@ -79,6 +81,7 @@ extern struct monitor_ops        *current_monitor;
 extern void monitor_open();
 extern void monitor_close();
 extern void monitor_detach();
+extern void monitor_attach();
 extern void monitor_resume();
 extern int  monitor_wait();
 extern void monitor_fetch_register();

diff --git a/gdb/op50-rom.c b/gdb/op50-rom.c
index abf85971d6435073b27035a48b662a518c66c910..10341eab50127dfb3bb1abd98c0773c56a4de2cc 100644 (file)
--- a/gdb/op50-rom.c
+++ b/gdb/op50-rom.c
@@ -20,7 +20,7 @@ static char *op50n_regnames[] = {
   "r7_s11 ", "r8_s10 ", "r9_s9 ",  "r10_s8 ", "r11_s7 ", "r12_s6 ", "r13_s5 ",
   "r14_s4 ", "r15_s3 ", "r16_s2 ", "r17_s1 ", "r18_s0 ", "r19_t4 ", "r20_t3 ",
   "r21_t2 ", "r22_t1 ", "r23_a3 ", "r24_a2 ", "r25_a1 ", "r26_a0 ", "r27_dp ",
-  "r28_v0 ", "r29_v1 ", "r30_sp ", "r31_t5 ", "",       "",       "",
+  "r28_v0 ", "r29_v1 ", "r30_sp ", "r31_t5 ", "",        "p",       "",
   "",        "",       "",       "",       "",       "",       "",
   "",        "",       "",       "",       "",       "",       "",
   "",        "",       "",       "",       "",       "",       "",    "",
@@ -88,11 +88,12 @@ Specify the serial device it is connected to (e.g. /dev/ttya).",
 struct monitor_ops op50n_cmds = {
   1,                                   /* 1 for ASCII, 0 for binary */
   ".\n",                               /* monitor init string */
-  "",                  /* execute or usually GO command */
+  "g %x",                      /* execute or usually GO command */
   "",                          /* continue command */
   "",                          /* single step */
-  "",                          /* set a breakpoint */
+  "b %x\n",                            /* set a breakpoint */
   "",                          /* clear a breakpoint */
+  1,                                   /* 0 for number, 1 for address */
   {
     "sx %x %x;.\n",                    /* set memory */
     "",                                /* delimiter  */

diff --git a/gdb/w89k-rom.c b/gdb/w89k-rom.c
index 53302dc1718257a9e2736a74e86f00fe8835db6c..ef1a3ee8b1b6d701522db66bb38358cc0842a3ef 100644 (file)
--- a/gdb/w89k-rom.c
+++ b/gdb/w89k-rom.c
@@ -18,7 +18,7 @@ static char *w89k_regnames[] = {
   "r0",   "r1",    "r2",   "r3",   "r4",  "r5",  "r6",  "r7",  "r8",  "r9",
   "r10",  "r11",   "r12",  "r13",  "r14", "r15", "r16", "r17", "r18", "r19",
   "r20",  "r21",   "r22",  "r23",  "r24", "r25", "r26", "r27", "r28", "r29",
-  "r30",  "r31",   "sar",  "",     "",    "",    "",
+  "r30",  "r31",   "sar",  "pc",   "",    "",    "",
   "eiem", "iir",   "iva",  "ior",  "ipsw","",    "",    "",    "",    "",
   "",     "",      "",     "",     "",    "",    "",    "ccr", "",    "",
   "tr0",  "tr1",   "",     "",     "",    "",    "",
@@ -45,7 +45,7 @@ struct target_ops w89k_ops = {
 Specify the serial device it is connected to (e.g. /dev/ttya).",
   w89k_open,
   monitor_close, 
-  0,
+  monitor_attach,
   monitor_detach,
   monitor_resume,
   monitor_wait,
@@ -82,12 +82,13 @@ Specify the serial device it is connected to (e.g. /dev/ttya).",
 
 struct monitor_ops w89k_cmds = {
   1,                                   /* 1 for ASCII, 0 for binary */
-  "\r",                                        /* monitor init string */
-  "G = 100000\r",                      /* execute or usually GO command */
-  "G\r",                               /* continue command */
-  "T\r",                               /* single step */
-  "BP %x\r",                           /* set a breakpoint */
-  "BC %x\r",                           /* clear a breakpoint */
+  "\n",                                        /* monitor init string */
+  "g = %x\n",                  /* execute or usually GO command */
+  "g\n",                               /* continue command */
+  "t\n",                               /* single step */
+  "bp %x\n",                           /* set a breakpoint */
+  "bc %x\n",                           /* clear a breakpoint */
+  0,                                   /* 0 for number, 1 for address */
   {
     "e %x %x\n",                       /* set memory */
     "",                                        /* delimiter */
@@ -111,7 +112,7 @@ struct monitor_ops w89k_cmds = {
   "U\r",                               /* download command */
   "ROM>",                              /* monitor command prompt */
   "",                                  /* end-of-command delimitor */
-  "",                          /* optional command terminator */
+  "",                                  /* optional command terminator */
   &w89k_ops,                           /* target operations */
   "xmodem-srec,xmodem-som",            /* load types */
   w89k_regnames                                /* registers names */