Alphebetize RISC-V Options section

2017-02-06  Palmer Dabbelt  <palmer@dabbelt.com>

        * docs/invoke.texi (RISC-V Options): Alphabetize.

From-SVN: r245231

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 9691fc7a62795ca0ef0966c0d9ae225713224216..38f1971df8fa7cd3f0fca2fee7be7888bf0bab74 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,7 @@
+2017-02-06  Palmer Dabbelt  <palmer@dabbelt.com>
+
+       * docs/invoke.texi (RISC-V Options): Alphabetize.
+
 2017-02-06  Palmer Dabbelt  <palmer@dabbelt.com>
 
        * doc/invoke.texi (RISC-V Options): Use two spaces to separate

diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index ae413b186c8c2eb79bdc4387e32222445c072ead..cabaa1b9b3594e26a4d6b9c67327298d8abb278f 100644 (file)
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -959,6 +959,20 @@ Objective-C and Objective-C++ Dialects}.
 @emph{PowerPC Options}
 See RS/6000 and PowerPC Options.
 
+@emph{RISC-V Options}
+@gccoptlist{-mbranch-cost=@var{N-instruction} @gol
+-mmemcpy  -mno-memcpy @gol
+-mplt  -mno-plt @gol
+-mabi=@var{ABI-string} @gol
+-mfdiv  -mno-fdiv @gol
+-mdiv  -mno-div @gol
+-march=@var{ISA-string} @gol
+-mtune=@var{processor-string} @gol
+-msmall-data-limit=@var{N-bytes} @gol
+-msave-restore  -mno-save-restore @gol
+-mcmodel=@var{code-model} @gol
+-mexplicit-relocs  -mno-explicit-relocs @gol}
+
 @emph{RL78 Options}
 @gccoptlist{-msim  -mmul=none  -mmul=g13  -mmul=g14  -mallregs @gol
 -mcpu=g10  -mcpu=g13  -mcpu=g14  -mg10  -mg13  -mg14 @gol
@@ -1026,20 +1040,6 @@ See RS/6000 and PowerPC Options.
 -mstack-protector-guard-offset=@var{offset} @gol
 -mlra  -mno-lra}
 
-@emph{RISC-V Options}
-@gccoptlist{-mbranch-cost=@var{N-instruction} @gol
--mmemcpy  -mno-memcpy @gol
--mplt  -mno-plt @gol
--mabi=@var{ABI-string} @gol
--mfdiv  -mno-fdiv @gol
--mdiv  -mno-div @gol
--march=@var{ISA-string} @gol
--mtune=@var{processor-string} @gol
--msmall-data-limit=@var{N-bytes} @gol
--msave-restore  -mno-save-restore @gol
--mcmodel=@var{code-model} @gol
--mexplicit-relocs  -mno-explicit-relocs @gol}
-
 @emph{RX Options}
 @gccoptlist{-m64bit-doubles  -m32bit-doubles  -fpu  -nofpu@gol
 -mcpu=@gol
@@ -13756,9 +13756,9 @@ platform.
 * PDP-11 Options::
 * picoChip Options::
 * PowerPC Options::
+* RISC-V Options::
 * RL78 Options::
 * RS/6000 and PowerPC Options::
-* RISC-V Options::
 * RX Options::
 * S/390 and zSeries Options::
 * Score Options::
@@ -20831,6 +20831,70 @@ these warnings.
 
 These are listed under @xref{RS/6000 and PowerPC Options}.
 
+@node RISC-V Options
+@subsection RISC-V Options
+@cindex RISC-V Options
+
+These command-line options are defined for RISC-V targets:
+
+@table @gcctabopt
+@item -mbranch-cost=@var{n}
+@opindex mbranch-cost
+Set the cost of branches to roughly @var{n} instructions.
+
+@item -mmemcpy
+@itemx -mno-memcpy
+@opindex mmemcpy
+Don't optimize block moves.
+
+@item -mplt
+@itemx -mno-plt
+@opindex plt
+When generating PIC code, allow the use of PLTs. Ignored for non-PIC.
+
+@item -mabi=@var{ABI-string}
+@opindex mabi
+Specify integer and floating-point calling convention.  This defaults to the
+natural calling convention: e.g.@ LP64 for RV64I, ILP32 for RV32I, LP64D for
+RV64G.
+
+@item -mfdiv
+@itemx -mno-fdiv
+@opindex mfdiv
+Use hardware floating-point divide and square root instructions.  This requires
+the F or D extensions for floating-point registers.
+
+@item -mdiv
+@itemx -mno-div
+@opindex mdiv
+Use hardware instructions for integer division.  This requires the M extension.
+
+@item -march=@var{ISA-string}
+@opindex march
+Generate code for given RISC-V ISA (e.g.@ @samp{rv64im}).  ISA strings must be
+lower-case.  Examples include @samp{rv64i}, @samp{rv32g}, and @samp{rv32imaf}.
+
+@item -mtune=@var{processor-string}
+@opindex mtune
+Optimize the output for the given processor, specified by microarchitecture
+name.
+
+@item -msmall-data-limit=@var{n}
+@opindex msmall-data-limit
+Put global and static data smaller than @var{n} bytes into a special section
+(on some targets).
+
+@item -msave-restore
+@itemx -mno-save-restore
+@opindex msave-restore
+Use smaller but slower prologue and epilogue code.
+
+@item -mcmodel=@var{code-model}
+@opindex mcmodel
+Specify the code model.
+
+@end table
+
 @node RL78 Options
 @subsection RL78 Options
 @cindex RL78 Options
@@ -22152,70 +22216,6 @@ offset from that base register. The default for those is as specified in the
 relevant ABI.
 @end table
 
-@node RISC-V Options
-@subsection RISC-V Options
-@cindex RISC-V Options
-
-These command-line options are defined for RISC-V targets:
-
-@table @gcctabopt
-@item -mbranch-cost=@var{n}
-@opindex mbranch-cost
-Set the cost of branches to roughly @var{n} instructions.
-
-@item -mmemcpy
-@itemx -mno-memcpy
-@opindex mmemcpy
-Don't optimize block moves.
-
-@item -mplt
-@itemx -mno-plt
-@opindex plt
-When generating PIC code, allow the use of PLTs. Ignored for non-PIC.
-
-@item -mabi=@var{ABI-string}
-@opindex mabi
-Specify integer and floating-point calling convention.  This defaults to the
-natural calling convention: e.g.@ LP64 for RV64I, ILP32 for RV32I, LP64D for
-RV64G.
-
-@item -mfdiv
-@itemx -mno-fdiv
-@opindex mfdiv
-Use hardware floating-point divide and square root instructions.  This requires
-the F or D extensions for floating-point registers.
-
-@item -mdiv
-@itemx -mno-div
-@opindex mdiv
-Use hardware instructions for integer division.  This requires the M extension.
-
-@item -march=@var{ISA-string}
-@opindex march
-Generate code for given RISC-V ISA (e.g.@ @samp{rv64im}).  ISA strings must be
-lower-case.  Examples include @samp{rv64i}, @samp{rv32g}, and @samp{rv32imaf}.
-
-@item -mtune=@var{processor-string}
-@opindex mtune
-Optimize the output for the given processor, specified by microarchitecture
-name.
-
-@item -msmall-data-limit=@var{n}
-@opindex msmall-data-limit
-Put global and static data smaller than @var{n} bytes into a special section
-(on some targets).
-
-@item -msave-restore
-@itemx -mno-save-restore
-@opindex msave-restore
-Use smaller but slower prologue and epilogue code.
-
-@item -mcmodel=@var{code-model}
-@opindex mcmodel
-Specify the code model.
-
-@end table
-
 @node RX Options
 @subsection RX Options
 @cindex RX Options