Fix a few reset issues in flash controller

Our flash controller fails when simulating with iverilog. Looking
closer, both wb_stash and auto_last_addr are X state, and things
fall apart after they get used.

Initialise them both fixes the iverilog issue.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>

diff --git a/spi_flash_ctrl.vhdl b/spi_flash_ctrl.vhdl
index 095bc74af760f78a6f6b147bb7a209e9a1f9d8b5..d2b49929d3e8aef00c2519be4511f911b5a80621 100644 (file)
--- a/spi_flash_ctrl.vhdl
+++ b/spi_flash_ctrl.vhdl
@@ -232,6 +232,10 @@ begin
             if rst = '1' then
                 wb_out.ack   <= '0';
                 wb_out.stall <= '0';
+               wb_stash.cyc <= '0';
+               wb_stash.stb <= '0';
+               wb_stash.sel <= (others => '0');
+               wb_stash.we <= '0';
             else
                 -- Latch wb responses as well for 1 cycle. Stall is updated
                 -- below
@@ -344,12 +348,16 @@ begin
     auto_sync: process(clk)
     begin
         if rising_edge(clk) then
-            auto_state <= auto_next;
-            auto_cnt   <= auto_cnt_next;
-            auto_data  <= auto_data_next;
-            if auto_latch_adr = '1' then
-                auto_last_addr <= auto_lad_next;
-            end if;
+           if rst = '1' then
+                auto_last_addr <= (others => '0');
+           else
+                auto_state <= auto_next;
+                auto_cnt   <= auto_cnt_next;
+                auto_data  <= auto_data_next;
+                if auto_latch_adr = '1' then
+                    auto_last_addr <= auto_lad_next;
+                end if;
+           end if;
         end if;
     end process;