# Make the default data size of pops 64 bits in 64 bit mode
.adjust_env oszIn64Override
- ld reg, ss, [1, t0, rsp]
+ ld t1, ss, [1, t0, rsp]
addi rsp, rsp, dsz
+ mov reg, reg, t1
};
def macroop POP_M {
.adjust_env oszIn64Override
ld t1, ss, [1, t0, rsp]
- # Check stack address
+ cda seg, sib, disp
addi rsp, rsp, dsz
st t1, seg, sib, disp
};
rdip t7
ld t1, ss, [1, t0, rsp]
- # Check stack address
+ cda seg, sib, disp
addi rsp, rsp, dsz
st t1, seg, riprel, disp
};
# Make the default data size of pops 64 bits in 64 bit mode
.adjust_env oszIn64Override
- # This needs to work slightly differently from the other versions of push
- # because the -original- version of the stack pointer is what gets pushed
stupd reg, ss, [1, t0, rsp], "-env.dataSize"
};
};
def macroop PUSHA {
- # Check all the stack addresses.
+ # Check all the stack addresses. We'll assume that if the beginning and
+ # end are ok, then the stuff in the middle should be as well.
+ cda ss, [1, t0, rsp], "-env.dataSize"
+ cda ss, [1, t0, rsp], "-8 * env.dataSize"
stupd rax, ss, [1, t0, rsp], "-env.dataSize"
stupd rcx, ss, [1, t0, rsp], "-env.dataSize"
stupd rdx, ss, [1, t0, rsp], "-env.dataSize"
};
def macroop POPA {
- # Check all the stack addresses.
- ld rdi, ss, [1, t0, rsp], "0 * env.dataSize"
+ # Check all the stack addresses. We'll assume that if the beginning and
+ # end are ok, then the stuff in the middle should be as well.
+ ld t1, ss, [1, t0, rsp], "0 * env.dataSize"
+ ld t2, ss, [1, t0, rsp], "7 * env.dataSize"
+ mov rdi, rdi, t1
ld rsi, ss, [1, t0, rsp], "1 * env.dataSize"
ld rbp, ss, [1, t0, rsp], "2 * env.dataSize"
ld rbx, ss, [1, t0, rsp], "4 * env.dataSize"
ld rdx, ss, [1, t0, rsp], "5 * env.dataSize"
ld rcx, ss, [1, t0, rsp], "6 * env.dataSize"
- ld rax, ss, [1, t0, rsp], "7 * env.dataSize"
+ mov rax, rax, t2
addi rsp, rsp, "8 * env.dataSize"
};
---------- Begin Simulation Statistics ----------
-host_inst_rate 1273928 # Simulator instruction rate (inst/s)
-host_mem_usage 175856 # Number of bytes of host memory used
-host_seconds 1258.84 # Real time elapsed on the host
-host_tick_rate 758576488 # Simulator tick rate (ticks/s)
+host_inst_rate 1240763 # Simulator instruction rate (inst/s)
+host_mem_usage 175872 # Number of bytes of host memory used
+host_seconds 1292.50 # Real time elapsed on the host
+host_tick_rate 738827746 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
-sim_insts 1603675345 # Number of instructions simulated
-sim_seconds 0.954929 # Number of seconds simulated
-sim_ticks 954929276500 # Number of ticks simulated
+sim_insts 1603680167 # Number of instructions simulated
+sim_seconds 0.954932 # Number of seconds simulated
+sim_ticks 954931687500 # Number of ticks simulated
system.cpu.idle_fraction 0 # Percentage of idle cycles
system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles
-system.cpu.numCycles 1909858554 # number of cpu cycles simulated
-system.cpu.num_insts 1603675345 # Number of instructions executed
+system.cpu.numCycles 1909863376 # number of cpu cycles simulated
+system.cpu.num_insts 1603680167 # Number of instructions executed
system.cpu.num_refs 607157396 # Number of memory references
system.cpu.workload.PROG:num_syscalls 18 # Number of system calls
All Rights Reserved
-M5 compiled Oct 19 2007 16:48:38
-M5 started Fri Oct 19 18:08:21 2007
+M5 compiled Oct 21 2007 20:57:52
+M5 started Sun Oct 21 21:35:26 2007
M5 executing on nacho
command line: build/X86_SE/m5.fast -d build/X86_SE/tests/fast/long/00.gzip/x86/linux/simple-atomic tests/run.py long/00.gzip/x86/linux/simple-atomic
Global frequency set at 1000000000000 ticks per second
-Exiting @ tick 954929276500 because target called exit()
+Exiting @ tick 954931687500 because target called exit()
---------- Begin Simulation Statistics ----------
-host_inst_rate 1133815 # Simulator instruction rate (inst/s)
-host_mem_usage 310268 # Number of bytes of host memory used
-host_seconds 237.78 # Real time elapsed on the host
-host_tick_rate 696782714 # Simulator tick rate (ticks/s)
+host_inst_rate 1168424 # Simulator instruction rate (inst/s)
+host_mem_usage 310284 # Number of bytes of host memory used
+host_seconds 230.78 # Real time elapsed on the host
+host_tick_rate 718029499 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
-sim_insts 269599525 # Number of instructions simulated
-sim_seconds 0.165682 # Number of seconds simulated
-sim_ticks 165681894000 # Number of ticks simulated
+sim_insts 269642969 # Number of instructions simulated
+sim_seconds 0.165704 # Number of seconds simulated
+sim_ticks 165703616000 # Number of ticks simulated
system.cpu.idle_fraction 0 # Percentage of idle cycles
system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles
-system.cpu.numCycles 331363789 # number of cpu cycles simulated
-system.cpu.num_insts 269599525 # Number of instructions executed
+system.cpu.numCycles 331407233 # number of cpu cycles simulated
+system.cpu.num_insts 269642969 # Number of instructions executed
system.cpu.num_refs 124052668 # Number of memory references
system.cpu.workload.PROG:num_syscalls 429 # Number of system calls
All Rights Reserved
-M5 compiled Oct 19 2007 16:48:38
-M5 started Fri Oct 19 16:54:37 2007
+M5 compiled Oct 21 2007 20:57:52
+M5 started Sun Oct 21 21:57:00 2007
M5 executing on nacho
command line: build/X86_SE/m5.fast -d build/X86_SE/tests/fast/long/10.mcf/x86/linux/simple-atomic tests/run.py long/10.mcf/x86/linux/simple-atomic
Global frequency set at 1000000000000 ticks per second
-Exiting @ tick 165681894000 because target called exit()
+Exiting @ tick 165703616000 because target called exit()
---------- Begin Simulation Statistics ----------
-host_inst_rate 1349569 # Simulator instruction rate (inst/s)
-host_mem_usage 179560 # Number of bytes of host memory used
-host_seconds 1098.57 # Real time elapsed on the host
-host_tick_rate 784871141 # Simulator tick rate (ticks/s)
+host_inst_rate 1244280 # Simulator instruction rate (inst/s)
+host_mem_usage 179592 # Number of bytes of host memory used
+host_seconds 1193.15 # Real time elapsed on the host
+host_tick_rate 723499766 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
-sim_insts 1482589975 # Number of instructions simulated
-sim_seconds 0.862233 # Number of seconds simulated
-sim_ticks 862232618000 # Number of ticks simulated
+sim_insts 1484611664 # Number of instructions simulated
+sim_seconds 0.863243 # Number of seconds simulated
+sim_ticks 863243462500 # Number of ticks simulated
system.cpu.idle_fraction 0 # Percentage of idle cycles
system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles
-system.cpu.numCycles 1724465237 # number of cpu cycles simulated
-system.cpu.num_insts 1482589975 # Number of instructions executed
+system.cpu.numCycles 1726486926 # number of cpu cycles simulated
+system.cpu.num_insts 1484611664 # Number of instructions executed
system.cpu.num_refs 533543283 # Number of memory references
system.cpu.workload.PROG:num_syscalls 541 # Number of system calls
All Rights Reserved
-M5 compiled Oct 19 2007 16:48:38
-M5 started Fri Oct 19 18:41:37 2007
+M5 compiled Oct 21 2007 20:57:52
+M5 started Sun Oct 21 22:00:51 2007
M5 executing on nacho
command line: build/X86_SE/m5.fast -d build/X86_SE/tests/fast/long/20.parser/x86/linux/simple-atomic tests/run.py long/20.parser/x86/linux/simple-atomic
Global frequency set at 1000000000000 ticks per second
-Exiting @ tick 862232618000 because target called exit()
+Exiting @ tick 863243462500 because target called exit()
---------- Begin Simulation Statistics ----------
-host_inst_rate 1178554 # Simulator instruction rate (inst/s)
-host_mem_usage 175672 # Number of bytes of host memory used
-host_seconds 3899.42 # Real time elapsed on the host
-host_tick_rate 719706854 # Simulator tick rate (ticks/s)
+host_inst_rate 1084871 # Simulator instruction rate (inst/s)
+host_mem_usage 175684 # Number of bytes of host memory used
+host_seconds 4236.15 # Real time elapsed on the host
+host_tick_rate 662497504 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
-sim_insts 4595671909 # Number of instructions simulated
-sim_seconds 2.806436 # Number of seconds simulated
-sim_ticks 2806436396000 # Number of ticks simulated
+sim_insts 4595672201 # Number of instructions simulated
+sim_seconds 2.806437 # Number of seconds simulated
+sim_ticks 2806436542000 # Number of ticks simulated
system.cpu.idle_fraction 0 # Percentage of idle cycles
system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles
-system.cpu.numCycles 5612872793 # number of cpu cycles simulated
-system.cpu.num_insts 4595671909 # Number of instructions executed
+system.cpu.numCycles 5612873085 # number of cpu cycles simulated
+system.cpu.num_insts 4595672201 # Number of instructions executed
system.cpu.num_refs 1686312529 # Number of memory references
system.cpu.workload.PROG:num_syscalls 33 # Number of system calls
All Rights Reserved
-M5 compiled Oct 19 2007 16:48:38
-M5 started Fri Oct 19 16:59:11 2007
+M5 compiled Oct 21 2007 20:57:52
+M5 started Sun Oct 21 22:20:45 2007
M5 executing on nacho
command line: build/X86_SE/m5.fast -d build/X86_SE/tests/fast/long/60.bzip2/x86/linux/simple-atomic tests/run.py long/60.bzip2/x86/linux/simple-atomic
Global frequency set at 1000000000000 ticks per second
-Exiting @ tick 2806436396000 because target called exit()
+Exiting @ tick 2806436542000 because target called exit()
---------- Begin Simulation Statistics ----------
-host_inst_rate 1299831 # Simulator instruction rate (inst/s)
-host_mem_usage 183188 # Number of bytes of host memory used
-host_seconds 167.72 # Real time elapsed on the host
-host_tick_rate 773401156 # Simulator tick rate (ticks/s)
+host_inst_rate 1304954 # Simulator instruction rate (inst/s)
+host_mem_usage 183200 # Number of bytes of host memory used
+host_seconds 167.36 # Real time elapsed on the host
+host_tick_rate 776224834 # Simulator tick rate (ticks/s)
sim_freq 1000000000000 # Frequency of simulated ticks
-sim_insts 218004208 # Number of instructions simulated
-sim_seconds 0.129713 # Number of seconds simulated
-sim_ticks 129713077000 # Number of ticks simulated
+sim_insts 218399764 # Number of instructions simulated
+sim_seconds 0.129911 # Number of seconds simulated
+sim_ticks 129910855000 # Number of ticks simulated
system.cpu.idle_fraction 0 # Percentage of idle cycles
system.cpu.not_idle_fraction 1 # Percentage of non-idle cycles
-system.cpu.numCycles 259426155 # number of cpu cycles simulated
-system.cpu.num_insts 218004208 # Number of instructions executed
+system.cpu.numCycles 259821711 # number of cpu cycles simulated
+system.cpu.num_insts 218399764 # Number of instructions executed
system.cpu.num_refs 77164404 # Number of memory references
system.cpu.workload.PROG:num_syscalls 395 # Number of system calls
All Rights Reserved
-M5 compiled Oct 19 2007 16:48:38
-M5 started Fri Oct 19 16:50:34 2007
+M5 compiled Oct 21 2007 20:57:52
+M5 started Sun Oct 21 23:31:23 2007
M5 executing on nacho
command line: build/X86_SE/m5.fast -d build/X86_SE/tests/fast/long/70.twolf/x86/linux/simple-atomic tests/run.py long/70.twolf/x86/linux/simple-atomic
Global frequency set at 1000000000000 ticks per second
-Exiting @ tick 129713077000 because target called exit()
+Exiting @ tick 129910855000 because target called exit()
projects / gem5.git / commitdiff