* ecoff.c: Fix comment typos.
* ecofflink.c: Likewise.
* format.c: Likewise.
* hp300hpux.c: Likewise.
* i386linux.c: Likewise.
* ieee.c: Likewise.
* m68klinux.c: Likewise.
* mach-o.h: Likewise.
* mipsbsd.c: Likewise.
* oasys.c: Likewise.
* opncls.c: Likewise.
* peXXigen.c: Likewise.
* reloc.c: Likewise.
* reloc16.c: Likewise.
* section.c: Likewise.
* simple.c: Likewise.
* som.c: Likewise.
* som.h: Likewise.
* sparclinux.c: Likewise.
* srec.c: Likewise.
* syms.c: Likewise.
* targets.c: Likewise.
* tekhex.c: Likewise.
* versados.c: Likewise.
* vms-gsd.c: Likewise.
* vms-hdr.c: Likewise.
* vms-misc.c: Likewise.
* xcofflink.c: Likewise.
* xsym.h: Likewise.
* bfd-in2.h: Regenerate.
2003-05-04 H.J. Lu <hjl@gnu.org>
- * elflink.h (elf_merge_symbol): Correctly handle weak definiton.
+ * elflink.h (elf_merge_symbol): Correctly handle weak definition.
2003-05-04 H.J. Lu <hjl@gnu.org>
* config.bfd: Added DLX configuraton.
* Makefile.am: Added DLX configuraton.
* configure.in: Added DLX configuraton.
- * archures.c: Add DLX architecure.
+ * archures.c: Add DLX architecture.
* reloc.c: Add DLX relocs.
* targets.c: Added DLX target vector.
* configure: Regenerate.
/* If this field is non null, then the supplied function is
called rather than the normal function. This allows really
- strange relocation methods to be accomodated (e.g., i960 callj
+ strange relocation methods to be accommodated (e.g., i960 callj
instructions). */
bfd_reloc_status_type (*special_function)
(bfd *, arelent *, struct bfd_symbol *, void *, asection *,
/* IBM 370/390 relocations */
BFD_RELOC_I370_D12,
-/* The type of reloc used to build a contructor table - at the moment
+/* The type of reloc used to build a constructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
It generally does map to one of the other relocation types. */
BFD_RELOC_CTOR,
BFD_RELOC_V850_TDA_4_4_OFFSET,
/* This is a 16 bit offset from the short data area pointer, with the
-bits placed non-contigously in the instruction. */
+bits placed non-contiguously in the instruction. */
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET,
/* This is a 16 bit offset from the zero data area pointer, with the
-bits placed non-contigously in the instruction. */
+bits placed non-contiguously in the instruction. */
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET,
/* This is a 6 bit offset from the call table base pointer. */
included in the output.
VTABLE_INHERIT is a zero-space relocation used to describe to the
-linker the inheritence tree of a C++ virtual function table. The
+linker the inheritance tree of a C++ virtual function table. The
relocation's symbol should be the parent class' vtable, and the
relocation should be located at the child vtable.
/* Motorola 68HC11 reloc.
This reloc marks the beginning of a jump/call instruction.
It is used for linker relaxation to correctly identify beginning
-of instruction and change some branchs to use PC-relative
+of instruction and change some branches to use PC-relative
addressing mode. */
BFD_RELOC_M68HC11_RL_JUMP,
<<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
<<BSF_GLOBAL>>. */
- /* The symbol is a debugging record. The value has an arbitary
+ /* The symbol is a debugging record. The value has an arbitrary
meaning, unless BSF_DEBUGGING_RELOC is also set. */
#define BSF_DEBUGGING 0x08
if (bfd_get_flavour (input_bfd) == bfd_target_ecoff_flavour)
{
- /* Abitrarily set the symbolic header vstamp to the vstamp
+ /* Arbitrarily set the symbolic header vstamp to the vstamp
of the first object file in the link. */
if (symhdr->vstamp == 0)
symhdr->vstamp
/* eraxxon: 'fdrtab_lookup' doesn't give what we want, at least for Compaq's
C++ compiler 6.2. Consider three FDRs with starting addresses of x, y,
and z, respectively, such that x < y < z. Assume further that
- y < 'offset' < z. It is possble at times that the PDR for 'offset' is
+ y < 'offset' < z. It is possible at times that the PDR for 'offset' is
associated with FDR x and *not* with FDR y. Erg!!
From a binary dump of my C++ test case 'moo' using Compaq's coffobjanl
Since the FDRs that are causing so much havok (in this case) 1) do not
describe actual files (fdr.rss == -1), and 2) contain only compiler
- genarated routines, I thought a simple fix would be to exclude them from
+ generated routines, I thought a simple fix would be to exclude them from
the FDR table in 'mk_fdrtab'. But, besides not knowing for certain
whether this would be correct, it creates an additional problem. If we
happen to ask for source file info on a compiler generated (procedure)
switch (format)
{
case bfd_object:
- return "object"; /* Linker/assember/compiler output. */
+ return "object"; /* Linker/assembler/compiler output. */
case bfd_archive:
return "archive"; /* Object archive file. */
case bfd_core:
/***************************************************************/
/* check the header to see if it was generated by a bfd output */
- /* this is detected rather bizarely by requiring a bunch of */
+ /* this is detected rather bizarrely by requiring a bunch of */
/* header fields to be zero and an old unused field (now used) */
/* to be set. */
/***************************************************************/
assignment to the strings pointer is done after we're thru using
the nlist so we don't overwrite anything important. */
- /* OK, now walk the new symtable, cacheing symbol properties */
+ /* OK, now walk the new symtable, caching symbol properties */
{
aout_symbol_type *cache_ptr = cached;
aout_symbol_type cache_save;
return FALSE;
/********************************************************/
- /* for hpux, the 'lenght' value indicates the length of */
+ /* for hpux, the 'length' value indicates the length of */
/* the symbol name which follows the nlist entry. */
/********************************************************/
if (length)
#endif
/* This special symbol is a set vector that contains a list of
- pointers to fixup tables. It will be present in any dynamicly
+ pointers to fixup tables. It will be present in any dynamically
linked file. The linker generated fixup table should also be added
to the list, and it should always appear in the second slot (the
first one is a dummy with a magic number that is defined in
(void) must_parse_int (&(ieee->h));
/* Fetch the default size if not resolved. */
size = must_parse_int (&(ieee->h));
- /* Fetch the defautlt value if available. */
+ /* Fetch the default value if available. */
if (! parse_int (&(ieee->h), &value))
{
value = 0;
const bfd_arch_info_type *arch;
char family[10];
- /* IEEE does not specify the format of the processor identificaton
+ /* IEEE does not specify the format of the processor identification
string, so the compiler is free to put in it whatever it wants.
We try here to recognize different processors belonging to the
m68k family. Code for other processors can be added here. */
#endif
/* This special symbol is a set vector that contains a list of
- pointers to fixup tables. It will be present in any dynamicly
+ pointers to fixup tables. It will be present in any dynamically
linked file. The linker generated fixup table should also be added
to the list, and it should always appear in the second slot (the
first one is a dummy with a magic number that is defined in
BFD_MACH_O_LC_FVMFILE = 0x9, /* Fixed VM file inclusion. */
BFD_MACH_O_LC_PREPAGE = 0xa, /* Prepage command (internal use). */
BFD_MACH_O_LC_DYSYMTAB = 0xb, /* Dynamic link-edit symbol table info. */
- BFD_MACH_O_LC_LOAD_DYLIB = 0xc, /* Load a dynamicly linked shared library. */
- BFD_MACH_O_LC_ID_DYLIB = 0xd, /* Dynamicly linked shared lib identification. */
+ BFD_MACH_O_LC_LOAD_DYLIB = 0xc, /* Load a dynamically linked shared library. */
+ BFD_MACH_O_LC_ID_DYLIB = 0xd, /* Dynamically linked shared lib identification. */
BFD_MACH_O_LC_LOAD_DYLINKER = 0xe, /* Load a dynamic linker. */
BFD_MACH_O_LC_ID_DYLINKER = 0xf, /* Dynamic linker identification. */
- BFD_MACH_O_LC_PREBOUND_DYLIB = 0x10,/* Modules prebound for a dynamicly. */
+ BFD_MACH_O_LC_PREBOUND_DYLIB = 0x10,/* Modules prebound for a dynamically. */
BFD_MACH_O_LC_ROUTINES = 0x11, /* Image routines. */
BFD_MACH_O_LC_SUB_FRAMEWORK = 0x12, /* Sub framework. */
BFD_MACH_O_LC_SUB_UMBRELLA = 0x13, /* Sub umbrella. */
BFD_MACH_O_LC_SUB_LIBRARY = 0x15, /* Sub library. */
BFD_MACH_O_LC_TWOLEVEL_HINTS = 0x16,/* Two-level namespace lookup hints. */
BFD_MACH_O_LC_PREBIND_CKSUM = 0x17, /* Prebind checksum. */
- /* Load a dynamicly linked shared library that is allowed to be
+ /* Load a dynamically linked shared library that is allowed to be
missing (weak). */
BFD_MACH_O_LC_LOAD_WEAK_DYLIB = 0x18
}
bfd_mach_o_symtab_command;
/* This is the second set of the symbolic information which is used to support
- the data structures for the dynamicly link editor.
+ the data structures for the dynamically link editor.
The original set of symbolic information in the symtab_command which contains
the symbol and string tables must also be present when this load command is
reference symbol table
indirect symbol table
The first three tables above (the table of contents, module table and
- reference symbol table) are only present if the file is a dynamicly linked
+ reference symbol table) are only present if the file is a dynamically linked
shared library. For executable and object modules, which are files
containing only one module, the information that would be in these three
tables is determined as follows:
file is part of the module.
reference symbol table - is the defined and undefined external symbols
- For dynamicly linked shared library files this load command also contains
+ For dynamically linked shared library files this load command also contains
offsets and sizes to the pool of relocation entries for all sections
separated into two groups:
external relocation entries
The last two groups are used by the dynamic binding process to do the
binding (indirectly through the module table and the reference symbol
- table when this is a dynamicly linked shared library file). */
+ table when this is a dynamically linked shared library file). */
unsigned long ilocalsym; /* Index to local symbols. */
unsigned long nlocalsym; /* Number of local symbols. */
/* For the for the dynamic binding process to find which module a symbol
is defined in the table of contents is used (analogous to the ranlib
structure in an archive) which maps defined external symbols to modules
- they are defined in. This exists only in a dynamicly linked shared
+ they are defined in. This exists only in a dynamically linked shared
library file. For executable and object modules the defined external
symbols are sorted by name and is use as the table of contents. */
table must reflect the modules that the file was created from. This is
done by having a module table that has indexes and counts into the merged
tables for each module. The module structure that these two entries
- refer to is described below. This exists only in a dynamicly linked
+ refer to is described below. This exists only in a dynamically linked
shared library file. For executable and object modules the file only
contains one module so everything in the file belongs to the module. */
indicates the external references (defined and undefined) each module
makes. For each module there is an offset and a count into the
reference symbol table for the symbols that the module references.
- This exists only in a dynamicly linked shared library file. For
+ This exists only in a dynamically linked shared library file. For
executable and object modules the defined external symbols and the
undefined external symbols indicates the external references. */
/* All the local relocation entries are grouped together (they are not
grouped by their module since they are only used if the object is moved
- from it staticly link edited address). */
+ from it statically link edited address). */
unsigned long locreloff; /* Offset to local relocation entries. */
unsigned long nlocrel; /* Number of local relocation entries. */
&& (symbol->flags & BSF_WEAK) == 0)
return bfd_reloc_undefined;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
if (bfd_is_com_section (symbol->section))
relocation = 0;
&& (symbol->flags & BSF_WEAK) == 0)
return bfd_reloc_undefined;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
if (bfd_is_com_section (symbol->section))
relocation = 0;
/*
There isn't a magic number in an Oasys archive, so the best we
- can do to verify reasnableness is to make sure that the values in
+ can do to verify reasonableness is to make sure that the values in
the header are too weird
*/
descriptors for other opens), with the supplied @var{fd} used as
an initial file descriptor (but subject to closure at any time),
call bfd_set_cacheable(bfd, 1) on the returned BFD. The default
- is to assume no cacheing; the file descriptor will remain open
+ is to assume no caching; the file descriptor will remain open
until <<bfd_close>>, and will not be affected by BFD operations
on other files.
if (extra->DataDirectory[1].VirtualAddress == 0)
/* Until other .idata fixes are made (pending patch), the entry for
- .idata is needed for backwards compatability. FIXME. */
+ .idata is needed for backwards compatibility. FIXME. */
add_data_entry (abfd, extra, 1, ".idata", ib);
/* For some reason, the virtual size (which is what's set by
&& strcmp (scnhdr_int->s_name, ".text") == 0)
{
/* By inference from looking at MS output, the 32 bit field
- which is the combintion of the number_of_relocs and
+ which is the combination of the number_of_relocs and
number_of_linenos is used for the line number count in
executables. A 16-bit field won't do for cc1. The MS
document says that the number of relocs is zero for
.
. {* If this field is non null, then the supplied function is
. called rather than the normal function. This allows really
-. strange relocation methods to be accomodated (e.g., i960 callj
+. strange relocation methods to be accommodated (e.g., i960 callj
. instructions). *}
. bfd_reloc_status_type (*special_function)
. (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
/ bfd_octets_per_byte (abfd)))
return bfd_reloc_outofrange;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
/ bfd_octets_per_byte (abfd)))
return bfd_reloc_outofrange;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
ENUM
BFD_RELOC_CTOR
ENUMDOC
- The type of reloc used to build a contructor table - at the moment
+ The type of reloc used to build a constructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
It generally does map to one of the other relocation types.
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
ENUMDOC
This is a 16 bit offset from the short data area pointer, with the
- bits placed non-contigously in the instruction.
+ bits placed non-contiguously in the instruction.
ENUM
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
ENUMDOC
This is a 16 bit offset from the zero data area pointer, with the
- bits placed non-contigously in the instruction.
+ bits placed non-contiguously in the instruction.
ENUM
BFD_RELOC_V850_CALLT_6_7_OFFSET
ENUMDOC
included in the output.
VTABLE_INHERIT is a zero-space relocation used to describe to the
- linker the inheritence tree of a C++ virtual function table. The
+ linker the inheritance tree of a C++ virtual function table. The
relocation's symbol should be the parent class' vtable, and the
relocation should be located at the child vtable.
Motorola 68HC11 reloc.
This reloc marks the beginning of a jump/call instruction.
It is used for linker relaxation to correctly identify beginning
- of instruction and change some branchs to use PC-relative
+ of instruction and change some branches to use PC-relative
addressing mode.
ENUM
BFD_RELOC_M68HC11_RL_GROUP
bfd_size_type amt;
/* Allocate and initialize the shrinks array for this section.
- The last element is used as an accumlator of shrinks. */
+ The last element is used as an accumulator of shrinks. */
amt = reloc_count + 1;
amt *= sizeof (unsigned);
shrinks = (unsigned *) bfd_zmalloc (amt);
| func (abfd, the_section, obj);
- This is the prefered method for iterating over sections; an
+ This is the preferred method for iterating over sections; an
alternative would be to use a loop:
| section *p;
/* The sections in ABFD may already have output sections and offsets set.
Because this function is primarily for debug sections, and GCC uses the
- knowledge that debug sections will generally have VMA 0 when emiting
+ knowledge that debug sections will generally have VMA 0 when emitting
relocations between DWARF-2 sections (which are supposed to be
section-relative offsets anyway), we need to reset the output offsets
to zero. We also need to arrange for section->output_section->vma plus
#ifndef NO_PCREL_MODES
/* If we have short and long pcrel modes, then generate the proper
mode selector, then the pcrel relocation. Redundant selectors
- will be eliminted as the relocs are sized and emitted. */
+ will be eliminated as the relocs are sized and emitted. */
bfd_size_type amt = sizeof (int);
final_types[0] = (int *) bfd_alloc (abfd, amt);
if (!final_types[0])
return TRUE;
}
-/* Return TRUE if the given space containins the given subspace. It
+/* Return TRUE if the given space contains the given subspace. It
is safe to assume space really is a space, and subspace really
is a subspace. */
continue;
/* If this subspace does not have real data, then we are
- finised with it. */
+ finished with it. */
if ((subsection->flags & SEC_HAS_CONTENTS) == 0)
{
som_section_data (subsection)->subspace_dict->fixup_request_index
/* This gets a bit gruesome because of the compilation unit. The
strings within the compilation unit are part of the symbol
strings, but don't have symbol_dictionary entries. So, manually
- write them and update the compliation unit header. On input, the
+ write them and update the compilation unit header. On input, the
compilation unit header contains local copies of the strings.
Move them aside. */
if (compilation_unit)
section = section->next;
}
- /* All the subspace dictiondary records are written, and all the
+ /* All the subspace dictionary records are written, and all the
fields are set up in the space dictionary records.
Seek to the right location and start writing the space
exec_header->exec_flags = obj_som_exec_data (abfd)->exec_flags;
/* Oh joys. Ram some of the BSS data into the DATA section
- to be compatable with how the hp linker makes objects
+ to be compatible with how the hp linker makes objects
(saves memory space). */
tmp = exec_header->exec_dsize;
tmp = SOM_ALIGN (tmp, PA_PAGESIZE);
+ sizeof (struct lst_header)), SEEK_SET) != 0)
return FALSE;
- /* Initializae the cache and allocate space for the library symbols. */
+ /* Initialize the cache and allocate space for the library symbols. */
ardata->cache = 0;
amt = ardata->symdef_count;
amt *= sizeof (carsym);
should be internal to the BFD backend.
The idea is both SOM and ELF define these basic relocation
- types so they map into a SOM or ELF specific reloation as
+ types so they map into a SOM or ELF specific relocation as
appropriate. This allows GAS to share much more code
between the two object formats. */
#endif
/* This special symbol is a set vector that contains a list of
- pointers to fixup tables. It will be present in any dynamicly
+ pointers to fixup tables. It will be present in any dynamically
linked file. The linker generated fixup table should also be added
to the list, and it should always appear in the second slot (the
first one is a dummy with a magic number that is defined in
{
unsigned int len = strlen (abfd->filename);
- /* I'll put an arbitary 40 char limit on header size. */
+ /* I'll put an arbitrary 40 char limit on header size. */
if (len > 40)
len = 40;
| nm foo
| 00012345 A dummy_symbol
- Many formats cannot represent arbitary symbol information; for
+ Many formats cannot represent arbitrary symbol information; for
instance, the <<a.out>> object format does not allow an
- arbitary number of sections. A symbol pointing to a section
+ arbitrary number of sections. A symbol pointing to a section
which is not one of <<.text>>, <<.data>> or <<.bss>> cannot
be described.
. <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
. <<BSF_GLOBAL>>. *}
.
-. {* The symbol is a debugging record. The value has an arbitary
+. {* The symbol is a debugging record. The value has an arbitrary
. meaning, unless BSF_DEBUGGING_RELOC is also set. *}
.#define BSF_DEBUGGING 0x08
.
long low, high;
long mid = -1;
- /* Cache non-existant or invalid. Do binary search on
+ /* Cache non-existent or invalid. Do binary search on
indextable. */
indexentry = NULL;
Targets
DESCRIPTION
- Each port of BFD to a different machine requries the creation
+ Each port of BFD to a different machine requires the creation
of a target back end. All the back end provides to the root
part of BFD is a structure containing pointers to functions
which perform certain low level operations on files. BFD
relocations. Their main application is communication with
devices like PROM programmers and ICE equipment.
- It seems that the sections are descibed as being really big,
+ It seems that the sections are described as being really big,
the example I have says that the text section is 0..ffffffff.
BFD would barf with this, many apps would try to alloc 4GB to
read in the file.
A VERSAdos file looks like contains
- o Indentification Record
+ o Identification Record
o External Symbol Definition Record
- o Object Text Recrod
+ o Object Text Record
o End Record
*/
last_index++;
}
- /* Don't know if this is neccesary for the linker but for now it keeps
+ /* Don't know if this is necessary for the linker but for now it keeps
vms_slurp_gsd happy */
sname = (char *)section->name;
/*-----------------------------------------------------------------------------*/
/* Output routines. */
-/* Manufacure a VMS like time on a unix based system.
+/* Manufacture a VMS like time on a unix based system.
stolen from obj-vms.c */
static unsigned char *
...
9 almost everything
- level is also identation level. Indentation is performed
+ level is also indentation level. Indentation is performed
if level > 0
*/
_bfd_vms_output_short (abfd, (unsigned int) rectype);
- /* save current output position to fill in lenght later */
+ /* save current output position to fill in length later */
if (PRIV (push_level) > 0)
PRIV (length_pos) = PRIV (output_size);
}
linoff = (auxlin.x_sym.x_fcnary.x_fcn.x_lnnoptr
- enclosing->line_filepos);
- /* explict cast to bfd_signed_vma for compiler */
+ /* explicit cast to bfd_signed_vma for compiler */
if (linoff < (bfd_signed_vma) (enclosing->lineno_count * linesz))
{
struct internal_lineno lin;
xcoff_mark_symbol (info, hsym);
hsym->flags |= (XCOFF_DEF_REGULAR | XCOFF_RTINIT);
- /* __rtinit initalized */
+ /* __rtinit initialized */
amt = sizeof (struct internal_ldsym);
ldsym = (struct internal_ldsym *) bfd_malloc (amt);
(Note that having a single module copied into two resources is not
possible). Modules map back to their resource via an index into the
resource table and an offset into the resource. Modules also point
- to their source files, both the definition module and implemention
+ to their source files, both the definition module and implementation
module. Because modules can be textually nested within other
modules, a link to the parent (containing) module is required. This
module can textually contain other modules. A link to the contiguous
projects / binutils-gdb.git / commitdiff