+Tue May 18 15:23:19 1993 Ken Raeburn (raeburn@cygnus.com)
+
+ * Makefile.in (DISTSTUFFDIRS): Renamed from PROTODIRS. Add ld and
+ gprof.
+ (taz): Run "make diststuff" in those directories instead of "make
+ proto-dir". Look for "VERSION=" only at start of line in subdir
+ Makefile. Use "gzip -9" for compression.
+ (TEXINFO_SUPPORT, DIST_SUPPORT, BINUTILS_SUPPORT_DIRS): New vars.
+ (binutils.tar.z): New target.
+
+Mon May 17 17:01:15 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
+
+ * Makefile.in (taz): Include gpl.texinfo.
+
+Fri May 14 06:48:38 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
+
+ * Makefile.in (setup-dirs): Merged into "taz" target.
+ (taz): Only do `proto-dir' stuff if a directory is actually needed
+ for this target.
+
+Wed May 12 13:09:44 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * Makefile.in (MUNCH_NM): New variable, defined to be $(NM).
+ (FLAGS_TO_PASS): Pass down MUNCH_NM.
+ (HOST_CC, HOST_PREFIX, HOST_PREFIX_1): New variables.
+ (EXTRA_GCC_FLAGS): Pass down HOST_* variables.
+ (gcc-no-fixedincludes): Correct for current gcc Makefile.
+
+Tue May 11 10:14:25 1993 Fred Fish (fnf@cygnus.com)
+
+ * Makefile.in (make-gdb.tar.Z): Add configure, config.guess,
+ config.sub, and move-if-change to gdb testsuite distribution
+ archive, so the testsuite can be extracted, configured, and
+ run separately from the gdb distribution. Blow away the Chill
+ tests that require a Chill compiled executable, since GNU Chill
+ is not yet publically available.
+
+Mon May 10 17:22:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * test-build.mk: set environment variables in a single command,
+ instead of a list of assignments and exports
+
+ * config.guess: recognize Alpha/OSF1 systems
+
Mon May 10 14:55:51 1993 K. Richard Pixley (rich@rtl.cygnus.com)
* configure: Change help message to prefer --options rather than
-options.
+Mon May 10 05:58:35 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
+
+ * config.sub: Convergent Tech. "miniframe" uses m68010, sez
+ zippy@ecst.csuchico.edu.
+ * config.guess: Recognize miniframe.
+
Sun May 9 17:47:57 1993 Rob Savoye (rob at darkstar.cygnus.com)
* Makefile.in: Use srcroot to find runtest rather than rootme.
rm -rf gcc/tmp-include; \
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
touch gcc/stmp-fixinc; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
rootme=`pwd`; export rootme; \
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
-# Directories that might want `make proto-dir' run.
-PROTODIRS= gdb
+# Directories that might want `make diststuff' run.
+DISTSTUFFDIRS= ld gprof gdb
.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo
./configure sun4
$(MAKE) clean
./configure -rm sun4
chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) -print`
- # Make links, and run "proto-dir" stuff when needed.
+ # Make links, and run "make diststuff" when needed.
# The `echo' for setting `p' is to convert all whitespace to spaces.
# Then the `case' further below should tell whether $$d is in
- # PROTODIRS.
+ # DISTSTUFFDIRS.
rm -rf proto-toplev ; mkdir proto-toplev
- dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- p=" `echo $(PROTODIRS)` " ; \
+ set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+ p=" `echo $(DISTSTUFFDIRS)` " ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
- case " $(PROTODIRS) " in \
- "* $$d *") (cd $$d ; $(MAKE) -f Makefile.in proto-dir) ; \
- ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ;; \
- *) ln -s ../$$d proto-toplev/$$d ;; \
+ case " $$p " in \
+ *" $$d "*) \
+ echo making diststuff in $$d ; \
+ (cd $$d ; $(MAKE) -f Makefile.in diststuff) || exit 1 ;; \
esac ; \
+ if [ -d $$d/proto-$$d.dir ]; then \
+ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
+ else \
+ ln -s ../$$d proto-toplev/$$d ; \
+ fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
#
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
chmod og=u `find proto-toplev -print`
- (VER=`sed <$(TOOL)/Makefile.in -n 's/VERSION *= *//p'`; \
+ (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
echo "==> Making $(TOOL)-$$VER.tar.z"; \
ln -s proto-toplev $(TOOL)-$$VER; \
tar cfh - $(TOOL)-$$VER \
- | $(GZIP) -v >$(TOOL)-$$VER.tar.z)
+ | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.z)
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes
+TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo
+DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.z
-gas.tar.z: $(DEVO_SUPPORT) $(GAS_SUPPORT_DIRS) gas texinfo/texinfo.tex
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes
+gas.tar.z: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas
+# The FSF "binutils" release includes gprof and ld.
+.PHONY: binutils.tar.z
+BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof
+binutils.tar.z: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
+ $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" TOOL=binutils
+
.PHONY: gas+binutils.tar.z
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.z: $(DEVO_SUPPORT) $(GASB_SUPPORT_DIRS) gas texinfo/texinfo.tex
+gas+binutils.tar.z: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas
.NOEXPORT:
projects / binutils-gdb.git / commitdiff