* arm/configure: Regenerated.
* avr/configure: Likewise.
* bfin/configure: Likewise.
* common/configure: Likewise.
* cr16/configure: Likewise.
* cris/configure: Likewise.
* d10v/configure: Likewise.
* erc32/configure: Likewise.
* frv/configure: Likewise.
* ft32/configure: Likewise.
* h8300/configure: Likewise.
* igen/configure: Likewise.
* iq2000/configure: Likewise.
* lm32/configure: Likewise.
* m32c/configure: Likewise.
* m32r/configure: Likewise.
* m68hc11/configure: Likewise.
* mcore/configure: Likewise.
* microblaze/configure: Likewise.
* mips/configure: Likewise.
* mn10300/configure: Likewise.
* moxie/configure: Likewise.
* msp430/configure: Likewise.
* ppc/configure: Likewise.
* rl78/configure: Likewise.
* rx/configure: Likewise.
* sh/configure: Likewise.
* sh64/configure: Likewise.
* v850/configure: Likewise.
+2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
+
+ * arm/configure: Regenerated.
+ * avr/configure: Likewise.
+ * bfin/configure: Likewise.
+ * common/configure: Likewise.
+ * cr16/configure: Likewise.
+ * cris/configure: Likewise.
+ * d10v/configure: Likewise.
+ * erc32/configure: Likewise.
+ * frv/configure: Likewise.
+ * ft32/configure: Likewise.
+ * h8300/configure: Likewise.
+ * igen/configure: Likewise.
+ * iq2000/configure: Likewise.
+ * lm32/configure: Likewise.
+ * m32c/configure: Likewise.
+ * m32r/configure: Likewise.
+ * m68hc11/configure: Likewise.
+ * mcore/configure: Likewise.
+ * microblaze/configure: Likewise.
+ * mips/configure: Likewise.
+ * mn10300/configure: Likewise.
+ * moxie/configure: Likewise.
+ * msp430/configure: Likewise.
+ * ppc/configure: Likewise.
+ * rl78/configure: Likewise.
+ * rx/configure: Likewise.
+ * sh/configure: Likewise.
+ * sh64/configure: Likewise.
+ * v850/configure: Likewise.
+
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :
# using the same condition.
# Use the system's zlib library.
- zlibdir=-L../zlib
- zlibinc="-I\$(srcdir)/../zlib"
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
# Check whether --with-system-zlib was given.
if test "${with_system_zlib+set}" = set; then :