along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-#if 0
-/* FIXME: This is from tm-m68hc1.h */
-
-#define GDB_TARGET_IS_M6811
-
-/* Define the bit, byte, and word ordering of the machine. */
-
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-
-/* Offset from address of function to start of its code.
- Zero on most machines. */
-
-#define FUNCTION_START_OFFSET 0
-
-#ifdef __STDC__ /* Forward decls for prototypes */
-struct frame_info;
-struct frame_saved_regs;
-struct type;
-struct value;
-#endif
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-extern CORE_ADDR m68hc11_skip_prologue ();
-#define SKIP_PROLOGUE(ip) \
- m68hc11_skip_prologue (ip)
-
-
-/* Stack grows downward. */
-
-#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
-
-/* For a breakpoint, use "test". This is also the breakpoint
- instruction on the 68HC12. */
-#define BREAKPOINT {0x0}
-
-/* If your kernel resets the pc after the trap happens you may need to
- define this before including this file. */
-#define DECR_PC_AFTER_BREAK 0
-
-extern char *m68hc11_register_names[];
-#define REGISTER_NAME(i) m68hc11_register_names[i]
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include "value.h"
+#include "inferior.h"
+#include "dis-asm.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "arch-utils.h"
-#define REGISTER_SIZE 2
+#include "target.h"
+#include "opcode/m68hc11.h"
/* Register numbers of various important registers.
Note that some of these values are "real" register numbers,
to be actual register numbers as far as the user is concerned
but do serve to get the desired values when passed to read_register. */
-#define X_REGNUM 0
-#define D_REGNUM 1
-#define Y_REGNUM 2
-#define SP_REGNUM 3
-#define PC_REGNUM 4
-#define A_REGNUM 5
-#define B_REGNUM 6
-#define PSW_REGNUM 7
-#define Z_REGNUM 8
-#define FP_REGNUM 9
-#define TMP_REGNUM 10
-#define ZS_REGNUM 11
-#define XY_REGNUM 12
-#define ZD1_REGNUM 13
-#define ZD32_REGNUM (ZD1_REGNUM+31)
-
-#define NUM_REGS (ZD32_REGNUM+1)
-
-#include "opcode/m68hc11.h"
-
-/* Say how much memory is needed to store a copy of the register set */
-#define REGISTER_BYTES ((NUM_REGS)*2)
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) ((N) * 2)
-
-/* Number of bytes of storage in the actual machine representation
- for register N. */
-
-#define REGISTER_RAW_SIZE(N) (2)
-
-/* Number of bytes of storage in the program's representation
- for register N. */
-
-#define REGISTER_VIRTUAL_SIZE(N) (2)
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 8
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 8
-
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-
-#define REGISTER_VIRTUAL_TYPE(N) builtin_type_uint16
-
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function.
-
- We store structs through a pointer passed in D */
-
-#define STORE_STRUCT_RETURN(ADDR, SP) \
- { write_register (D_REGNUM, (ADDR)); }
-
-
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format.
-
- Things always get returned in D/X */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- write_register_bytes (REGISTER_BYTE (D_REGNUM), VALBUF, TYPE_LENGTH (TYPE))
-
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
-\f
-
-/* Define other aspects of the stack frame.
- we keep a copy of the worked out return pc lying around, since it
- is a useful bit of info */
-
-#define EXTRA_FRAME_INFO \
- int frame_reg; \
- CORE_ADDR return_pc; \
- CORE_ADDR dummy; \
- int frameless; \
- int size;
-
-/* There's a mess in stack frame creation. See comments in blockframe.c
- near reference to INIT_FRAME_PC_FIRST. */
-
-#define INIT_FRAME_PC(fromleaf, prev) /* nada */
-
-#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
- (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \
- (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ());
-
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
- m68hc11_init_extra_frame_info (fromleaf, fi)
-
-extern void m68hc11_init_extra_frame_info (int fromleaf,
- struct frame_info * fi);
-
-/* A macro that tells us whether the function invocation represented
- by FI does not have a frame on the stack associated with it. If it
- does not, FRAMELESS is set to 1, else 0. */
-
-#define FRAMELESS_FUNCTION_INVOCATION(FI) \
- frameless_look_for_prologue (FI)
-
-#define FRAME_CHAIN(FRAME) m68hc11_frame_chain (FRAME)
-#define FRAME_CHAIN_VALID(chain,frame) \
- ((chain) != 0 && (frame) != 0)
-#define FRAME_SAVED_PC(FRAME) ((FRAME)->return_pc)
-#define FRAME_ARGS_ADDRESS(fi) (fi)->frame
-#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
-
-#define SAVED_PC_AFTER_CALL(frame) m68hc11_saved_pc_after_call (frame)
-
-/* Set VAL to the number of args passed to frame described by FI.
- Can set VAL to -1, meaning no way to tell. */
-/* We can't tell how many args there are */
-
-#define FRAME_NUM_ARGS(fi) (-1)
-
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 0
-
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
+#define HARD_X_REGNUM 0
+#define HARD_D_REGNUM 1
+#define HARD_Y_REGNUM 2
+#define HARD_SP_REGNUM 3
+#define HARD_PC_REGNUM 4
+
+#define HARD_A_REGNUM 5
+#define HARD_B_REGNUM 6
+#define HARD_CCR_REGNUM 7
+#define M68HC11_LAST_HARD_REG (HARD_CCR_REGNUM)
+
+/* Z is replaced by X or Y by gcc during machine reorg.
+ ??? There is no way to get it and even know whether
+ it's in X or Y or in ZS. */
+#define SOFT_Z_REGNUM 8
+
+/* Soft registers. These registers are special. There are treated
+ like normal hard registers by gcc and gdb (ie, within dwarf2 info).
+ They are physically located in memory. */
+#define SOFT_FP_REGNUM 9
+#define SOFT_TMP_REGNUM 10
+#define SOFT_ZS_REGNUM 11
+#define SOFT_XY_REGNUM 12
+#define SOFT_D1_REGNUM 13
+#define SOFT_D32_REGNUM (SOFT_D1_REGNUM+31)
+#define M68HC11_MAX_SOFT_REGS 32
+
+#define M68HC11_NUM_REGS (8)
+#define M68HC11_NUM_PSEUDO_REGS (M68HC11_MAX_SOFT_REGS+5)
+#define M68HC11_ALL_REGS (M68HC11_NUM_REGS+M68HC11_NUM_PSEUDO_REGS)
+
+#define M68HC11_REG_SIZE (2)
+
+struct gdbarch_tdep
+ {
+ /* from the elf header */
+ int elf_flags;
+ };
+
+struct frame_extra_info
+{
+ int frame_reg;
+ CORE_ADDR return_pc;
+ CORE_ADDR dummy;
+ int frameless;
+ int size;
+};
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
- m68hc11_frame_find_saved_regs (frame_info, &(frame_saved_regs))
+/* Table of registers for 68HC11. This includes the hard registers
+ and the soft registers used by GCC. */
+static char *
+m68hc11_register_names[] =
+{
+ "x", "d", "y", "sp", "pc", "a", "b",
+ "ccr", "z", "frame","tmp", "zs", "xy",
+ "d1", "d2", "d3", "d4", "d5", "d6", "d7",
+ "d8", "d9", "d10", "d11", "d12", "d13", "d14",
+ "d15", "d16", "d17", "d18", "d19", "d20", "d21",
+ "d22", "d23", "d24", "d25", "d26", "d27", "d28",
+ "d29", "d30", "d31", "d32"
+};
-extern void m68hc11_frame_find_saved_regs (struct frame_info *,
- struct frame_saved_regs *);
+struct m68hc11_soft_reg
+{
+ const char *name;
+ CORE_ADDR addr;
+};
-#define CALL_DUMMY { 0 }
-#define PUSH_DUMMY_FRAME
-#define CALL_DUMMY_START_OFFSET 0
-#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+static struct m68hc11_soft_reg soft_regs[M68HC11_ALL_REGS];
-extern CORE_ADDR m68hc11_call_dummy_address (void);
-#define CALL_DUMMY_ADDRESS() m68hc11_call_dummy_address ()
+#define M68HC11_FP_ADDR soft_regs[SOFT_FP_REGNUM].addr
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
-sp = m68hc11_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+static int soft_min_addr;
+static int soft_max_addr;
+static int soft_reg_initialized = 0;
-extern CORE_ADDR m68hc11_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR,
- int, struct value **,
- struct type *, int);
-#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
- sp = m68hc11_push_arguments ((nargs), (args), (sp), \
- (struct_return), (struct_addr))
-extern CORE_ADDR m68hc11_push_arguments (int, struct value **,
- CORE_ADDR, int, CORE_ADDR);
+/* Look in the symbol table for the address of a pseudo register
+ in memory. If we don't find it, pretend the register is not used
+ and not available. */
+static void
+m68hc11_get_register_info (struct m68hc11_soft_reg *reg, const char *name)
+{
+ struct minimal_symbol *msymbol;
+ msymbol = lookup_minimal_symbol (name, NULL, NULL);
+ if (msymbol)
+ {
+ reg->addr = SYMBOL_VALUE_ADDRESS (msymbol);
+ reg->name = xstrdup (name);
+
+ /* Keep track of the address range for soft registers. */
+ if (reg->addr < (CORE_ADDR) soft_min_addr)
+ soft_min_addr = reg->addr;
+ if (reg->addr > (CORE_ADDR) soft_max_addr)
+ soft_max_addr = reg->addr;
+ }
+ else
+ {
+ reg->name = 0;
+ reg->addr = 0;
+ }
+}
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
+/* Initialize the table of soft register addresses according
+ to the symbol table. */
+ static void
+m68hc11_initialize_register_info (void)
+{
+ int i;
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
-m68hc11_extract_return_value(TYPE, REGBUF, VALBUF)
-extern void m68hc11_extract_return_value (struct type *, char *, char *);
+ if (soft_reg_initialized)
+ return;
+
+ soft_min_addr = INT_MAX;
+ soft_max_addr = 0;
+ for (i = 0; i < M68HC11_ALL_REGS; i++)
+ {
+ soft_regs[i].name = 0;
+ }
+
+ m68hc11_get_register_info (&soft_regs[SOFT_FP_REGNUM], "_.frame");
+ m68hc11_get_register_info (&soft_regs[SOFT_TMP_REGNUM], "_.tmp");
+ m68hc11_get_register_info (&soft_regs[SOFT_ZS_REGNUM], "_.z");
+ soft_regs[SOFT_Z_REGNUM] = soft_regs[SOFT_ZS_REGNUM];
+ m68hc11_get_register_info (&soft_regs[SOFT_XY_REGNUM], "_.xy");
+ for (i = SOFT_D1_REGNUM; i < M68HC11_MAX_SOFT_REGS; i++)
+ {
+ char buf[10];
-/* Discard from the stack the innermost frame,
- restoring all saved registers. */
-#define POP_FRAME m68hc11_pop_frame();
-extern void m68hc11_pop_frame (void);
+ sprintf (buf, "_.d%d", i - SOFT_D1_REGNUM + 1);
+ m68hc11_get_register_info (&soft_regs[i], buf);
+ }
+ if (soft_regs[SOFT_FP_REGNUM].name == 0)
+ {
+ warning ("No frame soft register found in the symbol table.\n");
+ warning ("Stack backtrace will not work.\n");
+ }
+ soft_reg_initialized = 1;
+}
-/* Number of bits in the appropriate type. */
+/* Given an address in memory, return the soft register number if
+ that address corresponds to a soft register. Returns -1 if not. */
+static int
+m68hc11_which_soft_register (CORE_ADDR addr)
+{
+ int i;
+
+ if (addr < soft_min_addr || addr > soft_max_addr)
+ return -1;
+
+ for (i = SOFT_FP_REGNUM; i < M68HC11_ALL_REGS; i++)
+ {
+ if (soft_regs[i].name && soft_regs[i].addr == addr)
+ return i;
+ }
+ return -1;
+}
-#define TARGET_INT_BIT (2 * TARGET_CHAR_BIT)
-#define TARGET_PTR_BIT (2 * TARGET_CHAR_BIT)
-#define TARGET_DOUBLE_BIT (4 * TARGET_CHAR_BIT)
-#define TARGET_LONG_DOUBLE_BIT (8 * TARGET_CHAR_BIT)
+/* Fetch a pseudo register. The 68hc11 soft registers are treated like
+ pseudo registers. They are located in memory. Translate the register
+ fetch into a memory read. */
+void
+m68hc11_fetch_pseudo_register (int regno)
+{
+ char buf[MAX_REGISTER_RAW_SIZE];
-#endif
+ m68hc11_initialize_register_info ();
+
+ /* Fetch a soft register: translate into a memory read. */
+ if (soft_regs[regno].name)
+ {
+ target_read_memory (soft_regs[regno].addr, buf, 2);
+ }
+ else
+ {
+ memset (buf, 0, 2);
+ }
+ supply_register (regno, buf);
+}
-#include "defs.h"
-#include "frame.h"
-#include "obstack.h"
-#include "symtab.h"
-#include "gdbtypes.h"
-#include "gdbcmd.h"
-#include "gdbcore.h"
-#include "gdb_string.h"
-#include "value.h"
-#include "inferior.h"
-#include "dis-asm.h"
-#include "symfile.h"
-#include "objfiles.h"
+/* Store a pseudo register. Translate the register store
+ into a memory write. */
+static void
+m68hc11_store_pseudo_register (int regno)
+{
+ m68hc11_initialize_register_info ();
-/* NOTE: This port is not finished. Several operations are not implemented
- and will raise an error. Most of these functions concern the calling
- of a function by GDB itself (command 'call') and retrieving data pushed
- on the stack. */
+ /* Store a soft register: translate into a memory write. */
+ if (soft_regs[regno].name)
+ {
+ char buf[MAX_REGISTER_RAW_SIZE];
-void m68hc11_frame_find_saved_regs (struct frame_info *fi,
- struct frame_saved_regs *fsr);
-static void m68hc11_pop_dummy_frame (struct frame_info *fi);
+ read_register_gen (regno, buf);
+ target_write_memory (soft_regs[regno].addr, buf, 2);
+ }
+}
-/* Table of registers for 68HC11. This includes the hard registers
- and the pseudo hard registers used by GCC. */
-char*
-m68hc11_register_names[] =
+static char *
+m68hc11_register_name (int reg_nr)
{
- "x", "d", "y", "sp", "pc", "a", "b",
- "ccr", "z", "frame","tmp", "zs", "xy",
- "ZD1", "ZD2", "ZD3", "ZD4", "ZD5", "ZD6", "ZD7",
- "ZD8", "ZD9", "ZD10", "ZD11", "ZD12", "ZD13", "ZD14",
- "ZD15", "ZD16", "ZD17", "ZD18", "ZD19", "ZD20", "ZD21",
- "ZD22", "ZD23", "ZD24", "ZD25", "ZD26", "ZD27", "ZD28",
- "ZD29", "ZD30", "ZD31", "ZD32"
-};
-
-static int reg_last = 32 * 2 + 6;
-static int frame_index = 6;
+ if (reg_nr < 0)
+ return NULL;
+ if (reg_nr >= M68HC11_ALL_REGS)
+ return NULL;
+
+ /* If we don't know the address of a soft register, pretend it
+ does not exist. */
+ if (reg_nr > M68HC11_LAST_HARD_REG && soft_regs[reg_nr].name == 0)
+ return NULL;
+ return m68hc11_register_names[reg_nr];
+}
-/* Raise an error for operations which are not yet provided. */
-static void
-m68hc11_not_yet (const char *operation)
+static unsigned char *
+m68hc11_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
{
- error ("Operation '%s' is not yet implemented\n", operation);
+ static unsigned char breakpoint[] = {0x0};
+
+ *lenptr = sizeof (breakpoint);
+ return breakpoint;
}
/* Immediately after a function call, return the saved pc before the frame
- is setup. For sun3's, we check for the common case of being inside of a
- system call, and if so, we know that Sun pushes the call # on the stack
- prior to doing the trap. */
+ is setup. */
-CORE_ADDR
+static CORE_ADDR
m68hc11_saved_pc_after_call (struct frame_info *frame)
{
- unsigned addr = frame->frame + 1 + 2;
-
- addr = read_register (SP_REGNUM) + 1;
+ CORE_ADDR addr;
+
+ addr = read_register (HARD_SP_REGNUM) + 1;
addr &= 0x0ffff;
return read_memory_integer (addr, 2) & 0x0FFFF;
}
+static CORE_ADDR
+m68hc11_frame_saved_pc (struct frame_info *frame)
+{
+ return frame->extra_info->return_pc;
+}
+
+static CORE_ADDR
+m68hc11_frame_args_address (struct frame_info *frame)
+{
+ return frame->frame;
+}
+
+static CORE_ADDR
+m68hc11_frame_locals_address (struct frame_info *frame)
+{
+ return frame->frame;
+}
+
/* Discard from the stack the innermost frame, restoring all saved
registers. */
-void
+static void
m68hc11_pop_frame (void)
{
- m68hc11_not_yet ("m68hc11_pop_frame");
+ register struct frame_info *frame = get_current_frame ();
+ register CORE_ADDR fp, sp;
+ register int regnum;
+
+ if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+ generic_pop_dummy_frame ();
+ else
+ {
+ fp = FRAME_FP (frame);
+ FRAME_INIT_SAVED_REGS (frame);
+
+ /* Copy regs from where they were saved in the frame. */
+ for (regnum = 0; regnum < M68HC11_ALL_REGS; regnum++)
+ if (frame->saved_regs[regnum])
+ write_register (regnum,
+ read_memory_integer (frame->saved_regs[regnum], 2));
+
+ write_register (HARD_PC_REGNUM, frame->extra_info->return_pc);
+ sp = fp + frame->extra_info->size;
+ write_register (HARD_SP_REGNUM, sp);
+ }
+ flush_cached_frames ();
}
/* Analyze the function prologue to find some information
- the offset of the previous frame saved address (from current frame)
- the soft registers which are pushed. */
static void
-m68hc11_guess_from_prologue (CORE_ADDR pc, CORE_ADDR* first_line,
- int* frame_offset, int* pushed_regs)
+m68hc11_guess_from_prologue (CORE_ADDR pc, CORE_ADDR fp,
+ CORE_ADDR *first_line,
+ int *frame_offset, CORE_ADDR *pushed_regs)
{
+ CORE_ADDR save_addr;
CORE_ADDR func_end;
unsigned char op0, op1, op2;
int add_sp_mode;
- int sp_adjust;
+ int sp_adjust = 0;
int size;
int found_frame_point;
- int found_load;
+ int saved_reg;
CORE_ADDR first_pc;
- int reg_saved;
first_pc = get_pc_function_start (pc);
size = 0;
+ m68hc11_initialize_register_info ();
if (first_pc == 0)
{
*frame_offset = 0;
- *pushed_regs = 0;
*first_line = pc;
return;
}
op2 = read_memory_unsigned_integer (pc + 2, 1);
/* ldx *frame */
- if (op0 == OP_LDX && op1 == frame_index)
+ if (op0 == OP_LDX && op1 == M68HC11_FP_ADDR)
{
pc += 2;
}
/* ldy *frame */
- else if (op0 == OP_PAGE2 && op1 == OP_LDY && op2 == frame_index)
+ else if (op0 == OP_PAGE2 && op1 == OP_LDY
+ && op2 == M68HC11_FP_ADDR)
{
pc += 3;
}
}
/* sts *frame */
- else if (op0 == OP_STS && op1 == frame_index)
+ else if (op0 == OP_STS && op1 == M68HC11_FP_ADDR)
{
found_frame_point = 1;
pc += 2;
/* Now, look forward to see how many registers are pushed on the stack.
We look only for soft registers so there must be a first LDX *REG
before a PSHX. */
- reg_saved = 0;
- found_load = 0;
+ saved_reg = -1;
+ save_addr = fp;
while (pc + 2 < func_end)
{
op0 = read_memory_unsigned_integer (pc, 1);
op1 = read_memory_unsigned_integer (pc + 1, 1);
op2 = read_memory_unsigned_integer (pc + 2, 1);
- if (op0 == OP_LDX && op1 > frame_index && op1 <= reg_last)
+ if (op0 == OP_LDX)
{
- found_load = 1;
+ saved_reg = m68hc11_which_soft_register (op1);
+ if (saved_reg < 0 || saved_reg == SOFT_FP_REGNUM)
+ break;
+
pc += 2;
}
- else if (op0 == OP_PAGE2 && op1 == OP_LDY
- && op2 > frame_index && op2 < reg_last)
+ else if (op0 == OP_PAGE2 && op1 == OP_LDY)
{
- found_load = 1;
+ saved_reg = m68hc11_which_soft_register (op2);
+ if (saved_reg < 0 || saved_reg == SOFT_FP_REGNUM)
+ break;
+
pc += 3;
}
else if (op0 == OP_PSHX)
{
/* If there was no load, this is a push for a function call. */
- if (found_load == 0)
+ if (saved_reg < 0 || saved_reg >= M68HC11_ALL_REGS)
break;
-
- reg_saved += 2;
+
+ /* Keep track of the address where that register is saved
+ on the stack. */
+ save_addr -= 2;
+ if (pushed_regs)
+ pushed_regs[saved_reg] = save_addr;
+
pc += 1;
- found_load = 0;
+ saved_reg = -1;
}
else if (op0 == OP_PAGE2 && op1 == OP_PSHY)
{
- if (found_load == 0)
+ if (saved_reg < 0 || saved_reg >= M68HC11_ALL_REGS)
break;
- reg_saved += 2;
+ /* Keep track of the address where that register is saved
+ on the stack. */
+ save_addr -= 2;
+ if (pushed_regs)
+ pushed_regs[saved_reg] = save_addr;
+
pc += 2;
- found_load = 0;
+ saved_reg = -1;
}
else
{
break;
}
}
- *pushed_regs = reg_saved;
*first_line = pc;
}
-
-CORE_ADDR
+static CORE_ADDR
m68hc11_skip_prologue (CORE_ADDR pc)
{
CORE_ADDR func_addr, func_end;
struct symtab_and_line sal;
int frame_offset;
- int pushed_args;
- /* If we have line debugging information, then the end of the. */
- /* prologue should be the first assembly instruction of the
+ /* If we have line debugging information, then the end of the
+ prologue should be the first assembly instruction of the
first source line. */
if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
{
return sal.end;
}
- m68hc11_guess_from_prologue (pc, &pc, &frame_offset, &pushed_args);
+ m68hc11_guess_from_prologue (pc, 0, &pc, &frame_offset, 0);
return pc;
}
INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
*/
-CORE_ADDR
+static CORE_ADDR
m68hc11_frame_chain (struct frame_info *frame)
{
- unsigned addr;
+ CORE_ADDR addr;
- if (frame->return_pc == 0 || inside_entry_file(frame->return_pc))
- return (CORE_ADDR)0;
+ if (frame->extra_info->return_pc == 0
+ || inside_entry_file (frame->extra_info->return_pc))
+ return (CORE_ADDR) 0;
if (frame->frame == 0)
{
return (CORE_ADDR) 0;
}
- addr = frame->frame + frame->size + 1 - 2;
+ addr = frame->frame + frame->extra_info->size + 1 - 2;
addr = read_memory_unsigned_integer (addr, 2) & 0x0FFFF;
if (addr == 0)
{
- return (CORE_ADDR)0;
+ return (CORE_ADDR) 0;
}
return addr;
This includes special registers such as pc and fp saved in special
ways in the stack frame. sp is even more special: the address we
return for it IS the sp for the next frame. */
-void
-m68hc11_frame_find_saved_regs (struct frame_info *fi,
- struct frame_saved_regs *fsr)
+static void
+m68hc11_frame_init_saved_regs (struct frame_info *fi)
{
CORE_ADDR pc;
- int saved;
-
+
+ if (fi->saved_regs == NULL)
+ frame_saved_regs_zalloc (fi);
+ else
+ memset (fi->saved_regs, 0, sizeof (fi->saved_regs));
+
pc = fi->pc;
- memset (fsr, 0, sizeof (*fsr));
- m68hc11_guess_from_prologue (pc, &pc, &fi->size, &saved);
+ m68hc11_guess_from_prologue (pc, fi->frame, &pc, &fi->extra_info->size,
+ fi->saved_regs);
+
+ fi->saved_regs[SOFT_FP_REGNUM] = fi->frame + fi->extra_info->size + 1 - 2;
+ fi->saved_regs[HARD_SP_REGNUM] = fi->frame + fi->extra_info->size + 1;
+ fi->saved_regs[HARD_PC_REGNUM] = fi->saved_regs[HARD_SP_REGNUM];
}
-void
+static void
m68hc11_init_extra_frame_info (int fromleaf, struct frame_info *fi)
{
- unsigned addr;
- struct frame_saved_regs dummy;
+ CORE_ADDR addr;
- m68hc11_frame_find_saved_regs (fi, &dummy);
+ fi->extra_info = (struct frame_extra_info *)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
+
+ if (fi->next)
+ fi->pc = FRAME_SAVED_PC (fi->next);
+
+ m68hc11_frame_init_saved_regs (fi);
if (fromleaf)
{
- fi->return_pc = m68hc11_saved_pc_after_call (fi);
+ fi->extra_info->return_pc = m68hc11_saved_pc_after_call (fi);
}
else
{
- addr = fi->frame + fi->size + 1;
- fi->return_pc = read_memory_unsigned_integer (addr, 2) & 0x0ffff;
-
+ addr = fi->frame + fi->extra_info->size + 1;
+ addr = read_memory_unsigned_integer (addr, 2) & 0x0ffff;
+ fi->extra_info->return_pc = addr;
#if 0
printf ("Pc@0x%04x, FR 0x%04x, size %d, read ret @0x%04x -> 0x%04x\n",
fi->pc,
static void
show_regs (char *args, int from_tty)
{
- int ccr = read_register (PSW_REGNUM);
+ int ccr = read_register (HARD_CCR_REGNUM);
int i;
-
+ int nr;
+
printf_filtered ("PC=%04x SP=%04x FP=%04x CCR=%02x %c%c%c%c%c%c%c%c\n",
- read_register (PC_REGNUM),
- read_register (SP_REGNUM),
- read_register (FP_REGNUM),
+ (int) read_register (HARD_PC_REGNUM),
+ (int) read_register (HARD_SP_REGNUM),
+ (int) read_register (SOFT_FP_REGNUM),
ccr,
ccr & M6811_S_BIT ? 'S' : '-',
ccr & M6811_X_BIT ? 'X' : '-',
ccr & M6811_C_BIT ? 'C' : '-');
printf_filtered ("D=%04x IX=%04x IY=%04x\n",
- read_register (D_REGNUM),
- read_register (X_REGNUM),
- read_register (Y_REGNUM));
- for (i = ZD1_REGNUM; i <= ZD32_REGNUM; i++)
+ (int) read_register (HARD_D_REGNUM),
+ (int) read_register (HARD_X_REGNUM),
+ (int) read_register (HARD_Y_REGNUM));
+
+ nr = 0;
+ for (i = SOFT_D1_REGNUM; i < M68HC11_ALL_REGS; i++)
{
- printf_filtered ("ZD%d=%04x",
- i - ZD1_REGNUM + 1,
- read_register (i));
- if (((i - ZD1_REGNUM) % 8) == 7)
+ /* Skip registers which are not defined in the symbol table. */
+ if (soft_regs[i].name == 0)
+ continue;
+
+ printf_filtered ("D%d=%04x",
+ i - SOFT_D1_REGNUM + 1,
+ (int) read_register (i));
+ nr++;
+ if ((nr % 8) == 7)
printf_filtered ("\n");
else
printf_filtered (" ");
}
+ if (nr && (nr % 8) != 7)
+ printf_filtered ("\n");
}
-CORE_ADDR
-m68hc11_fix_call_dummy (char *dummyname,
- CORE_ADDR start_sp,
- CORE_ADDR fun,
- int nargs,
- value_ptr *args,
- struct type *type,
- int gcc_p)
-{
- m68hc11_not_yet ("m68hc11_fix_call_dummy");
- return 0;
-}
-
-static void
-m68hc11_pop_dummy_frame (struct frame_info *fi)
-{
- m68hc11_not_yet ("m68hc11_pop_dummy_frame");
-}
-
-
-CORE_ADDR
+static CORE_ADDR
m68hc11_push_arguments (int nargs,
value_ptr *args,
CORE_ADDR sp,
int struct_return,
CORE_ADDR struct_addr)
{
- m68hc11_not_yet ("m68hc11_push_arguments");
- return 0;
+ int stack_alloc;
+ int argnum;
+ int first_stack_argnum;
+ int stack_offset;
+ struct type *type;
+ char *val;
+ int len;
+
+ stack_alloc = 0;
+ first_stack_argnum = 0;
+ if (struct_return)
+ {
+ write_register (HARD_D_REGNUM, struct_addr);
+ }
+ else if (nargs > 0)
+ {
+ type = VALUE_TYPE (args[0]);
+ len = TYPE_LENGTH (type);
+
+ /* First argument is passed in D and X registers. */
+ if (len <= 4)
+ {
+ LONGEST v = extract_unsigned_integer (VALUE_CONTENTS (args[0]), len);
+ first_stack_argnum = 1;
+ write_register (HARD_D_REGNUM, v);
+ if (len > 2)
+ {
+ v >>= 16;
+ write_register (HARD_X_REGNUM, v);
+ }
+ }
+ }
+ for (argnum = first_stack_argnum; argnum < nargs; argnum++)
+ {
+ type = VALUE_TYPE (args[argnum]);
+ stack_alloc += (TYPE_LENGTH (type) + 1) & ~2;
+ }
+ sp -= stack_alloc;
+
+ stack_offset = 1;
+ for (argnum = first_stack_argnum; argnum < nargs; argnum++)
+ {
+ type = VALUE_TYPE (args[argnum]);
+ len = TYPE_LENGTH (type);
+
+ val = (char*) VALUE_CONTENTS (args[argnum]);
+ write_memory (sp + stack_offset, val, len);
+ stack_offset += len;
+ }
+ return sp;
}
+/* Return a location where we can set a breakpoint that will be hit
+ when an inferior function call returns. */
CORE_ADDR
m68hc11_call_dummy_address (void)
{
- m68hc11_not_yet ("m68hc11_call_dummy_address");
- return 0;
+ return (CORE_ADDR) read_register (HARD_PC_REGNUM);
}
-/* Given a return value in `regbuf' with a type `valtype',
+static struct type *
+m68hc11_register_virtual_type (int reg_nr)
+{
+ return builtin_type_uint16;
+}
+
+static void
+m68hc11_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+{
+ write_register (HARD_D_REGNUM, addr);
+}
+
+static void
+m68hc11_store_return_value (struct type *type, char *valbuf)
+{
+ write_register_bytes (REGISTER_BYTE (HARD_D_REGNUM),
+ valbuf, TYPE_LENGTH (type));
+}
+
+
+/* Given a return value in `regbuf' with a type `type',
extract and copy its value into `valbuf'. */
-void
-m68hc11_extract_return_value (struct type *valtype,
+static void
+m68hc11_extract_return_value (struct type *type,
char *regbuf,
char *valbuf)
{
- m68hc11_not_yet ("m68hc11_extract_return_value");
+ int len = TYPE_LENGTH (type);
+
+ if (len <= 2)
+ {
+ memcpy (valbuf, ®buf[2], len);
+ }
+ else if (len <= 4)
+ {
+ memcpy (valbuf, regbuf, len);
+ }
+ else
+ {
+ error ("bad size for return value");
+ }
+}
+
+/* Should call_function allocate stack space for a struct return? */
+static int
+m68hc11_use_struct_convention (int gcc_p, struct type *type)
+{
+ return (TYPE_LENGTH (type) > 4);
+}
+
+static int
+m68hc11_return_value_on_stack (struct type *type)
+{
+ return m68hc11_use_struct_convention (1, type);
+}
+
+/* Extract from an array REGBUF containing the (raw) register state
+ the address in which a function should return its structure value,
+ as a CORE_ADDR (or an expression that can be used as one). */
+static CORE_ADDR
+m68hc11_extract_struct_value_address (char *regbuf)
+{
+ return extract_address (®buf[HARD_D_REGNUM * 2],
+ REGISTER_RAW_SIZE (HARD_D_REGNUM));
+}
+
+/* Function: push_return_address (pc)
+ Set up the return address for the inferior function call.
+ Needed for targets where we don't actually execute a JSR/BSR instruction */
+
+static CORE_ADDR
+m68hc11_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+{
+ char valbuf[2];
+
+ pc = read_register (HARD_PC_REGNUM);
+ sp -= 2;
+ store_unsigned_integer (valbuf, 2, pc);
+ write_memory (sp + 1, valbuf, 2);
+#if 0
+ write_register (HARD_PC_REGNUM, CALL_DUMMY_ADDRESS ());
+#endif
+ return sp;
+}
+
+/* Index within `registers' of the first byte of the space for
+ register N. */
+static int
+m68hc11_register_byte (int reg_nr)
+{
+ return (reg_nr * M68HC11_REG_SIZE);
+}
+
+static int
+m68hc11_register_raw_size (int reg_nr)
+{
+ return M68HC11_REG_SIZE;
+}
+
+static struct gdbarch *
+m68hc11_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
+{
+ static LONGEST m68hc11_call_dummy_words[] =
+ {0};
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int elf_flags;
+
+ /* Extract the elf_flags if available */
+ elf_flags = 0;
+
+ soft_reg_initialized = 0;
+
+ /* try to find a pre-existing architecture */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* MIPS needs to be pedantic about which ABI the object is
+ using. */
+ if (gdbarch_tdep (current_gdbarch)->elf_flags != elf_flags)
+ continue;
+ return arches->gdbarch;
+ }
+
+ /* Need a new architecture. Fill in a target specific vector. */
+ tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+ gdbarch = gdbarch_alloc (&info, tdep);
+ tdep->elf_flags = elf_flags;
+
+ /* Initially set everything according to the ABI. */
+ set_gdbarch_short_bit (gdbarch, 16);
+ set_gdbarch_int_bit (gdbarch, 32);
+ set_gdbarch_float_bit (gdbarch, 32);
+ set_gdbarch_double_bit (gdbarch, 64);
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_ptr_bit (gdbarch, 16);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+
+ /* Set register info. */
+ set_gdbarch_fp0_regnum (gdbarch, -1);
+ set_gdbarch_max_register_raw_size (gdbarch, 2);
+ set_gdbarch_max_register_virtual_size (gdbarch, 2);
+ set_gdbarch_register_raw_size (gdbarch, m68hc11_register_raw_size);
+ set_gdbarch_register_virtual_size (gdbarch, m68hc11_register_raw_size);
+ set_gdbarch_register_byte (gdbarch, m68hc11_register_byte);
+ set_gdbarch_frame_init_saved_regs (gdbarch, m68hc11_frame_init_saved_regs);
+ set_gdbarch_frame_args_skip (gdbarch, 0);
+
+ set_gdbarch_read_pc (gdbarch, generic_target_read_pc);
+ set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
+ set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
+ set_gdbarch_write_fp (gdbarch, generic_target_write_fp);
+ set_gdbarch_read_sp (gdbarch, generic_target_read_sp);
+ set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
+
+ set_gdbarch_num_regs (gdbarch, M68HC11_NUM_REGS);
+ set_gdbarch_num_pseudo_regs (gdbarch, M68HC11_NUM_PSEUDO_REGS);
+ set_gdbarch_sp_regnum (gdbarch, HARD_SP_REGNUM);
+ set_gdbarch_fp_regnum (gdbarch, SOFT_FP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, HARD_PC_REGNUM);
+ set_gdbarch_register_name (gdbarch, m68hc11_register_name);
+ set_gdbarch_register_size (gdbarch, 2);
+ set_gdbarch_register_bytes (gdbarch, M68HC11_ALL_REGS * 2);
+ set_gdbarch_register_virtual_type (gdbarch, m68hc11_register_virtual_type);
+ set_gdbarch_fetch_pseudo_register (gdbarch, m68hc11_fetch_pseudo_register);
+ set_gdbarch_store_pseudo_register (gdbarch, m68hc11_store_pseudo_register);
+
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, m68hc11_call_dummy_address);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1); /*???*/
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, generic_pc_in_call_dummy);
+ set_gdbarch_call_dummy_words (gdbarch, m68hc11_call_dummy_words);
+ set_gdbarch_sizeof_call_dummy_words (gdbarch,
+ sizeof (m68hc11_call_dummy_words));
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
+ set_gdbarch_fix_call_dummy (gdbarch, generic_fix_call_dummy);
+ set_gdbarch_extract_return_value (gdbarch, m68hc11_extract_return_value);
+ set_gdbarch_push_arguments (gdbarch, m68hc11_push_arguments);
+ set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
+ set_gdbarch_push_return_address (gdbarch, m68hc11_push_return_address);
+ set_gdbarch_return_value_on_stack (gdbarch, m68hc11_return_value_on_stack);
+
+ set_gdbarch_store_struct_return (gdbarch, m68hc11_store_struct_return);
+ set_gdbarch_store_return_value (gdbarch, m68hc11_store_return_value);
+ set_gdbarch_extract_struct_value_address (gdbarch,
+ m68hc11_extract_struct_value_address);
+ set_gdbarch_register_convertible (gdbarch, generic_register_convertible_not);
+
+
+ set_gdbarch_frame_chain (gdbarch, m68hc11_frame_chain);
+ set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
+ set_gdbarch_frame_saved_pc (gdbarch, m68hc11_frame_saved_pc);
+ set_gdbarch_frame_args_address (gdbarch, m68hc11_frame_args_address);
+ set_gdbarch_frame_locals_address (gdbarch, m68hc11_frame_locals_address);
+ set_gdbarch_saved_pc_after_call (gdbarch, m68hc11_saved_pc_after_call);
+ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+
+ set_gdbarch_frame_chain_valid (gdbarch, func_frame_chain_valid);
+ set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
+
+ set_gdbarch_store_struct_return (gdbarch, m68hc11_store_struct_return);
+ set_gdbarch_store_return_value (gdbarch, m68hc11_store_return_value);
+ set_gdbarch_extract_struct_value_address
+ (gdbarch, m68hc11_extract_struct_value_address);
+ set_gdbarch_use_struct_convention (gdbarch, m68hc11_use_struct_convention);
+ set_gdbarch_init_extra_frame_info (gdbarch, m68hc11_init_extra_frame_info);
+ set_gdbarch_pop_frame (gdbarch, m68hc11_pop_frame);
+ set_gdbarch_skip_prologue (gdbarch, m68hc11_skip_prologue);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+ set_gdbarch_function_start_offset (gdbarch, 0);
+ set_gdbarch_breakpoint_from_pc (gdbarch, m68hc11_breakpoint_from_pc);
+
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+ set_gdbarch_ieee_float (gdbarch, 1);
+
+ return gdbarch;
}
void
_initialize_m68hc11_tdep (void)
{
- tm_print_insn = print_insn_m68hc11;
+ register_gdbarch_init (bfd_arch_m68hc11, m68hc11_gdbarch_init);
+ if (!tm_print_insn) /* Someone may have already set it */
+ tm_print_insn = print_insn_m68hc11;
add_com ("regs", class_vars, show_regs, "Print all registers");
}
projects / binutils-gdb.git / commitdiff