The common code already calls this, so no need to do so in arch dirs.
We leave the calls that disable -Werror. This will help unify the
configure scripts.
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* interp.c: Include portability.h.
enable_sim_inline
enable_sim_endian
enable_sim_default_model
+enable_sim_hardware
enable_werror
enable_build_warnings
enable_sim_build_warnings
-enable_sim_hardware
'
ac_precious_vars='build_alias
host_alias
Specify target byte endian orientation
--enable-sim-default-model=model
Specify default model to simulate
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST
- Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
-# Check whether --enable-werror was given.
-if test "${enable_werror+set}" = set; then :
- enableval=$enable_werror; case "${enableval}" in
- yes | y) ERROR_ON_WARNING="yes" ;;
- no | n) ERROR_ON_WARNING="no" ;;
- *) as_fn_error $? "bad value ${enableval} for --enable-werror" "$LINENO" 5 ;;
- esac
-fi
-
-
-# Enable -Werror by default when using gcc
-if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
- ERROR_ON_WARNING=yes
-fi
-
-WERROR_CFLAGS=""
- if test "${ERROR_ON_WARNING}" = yes ; then
- WERROR_CFLAGS="-Werror"
- fi
-
-build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
--Wpointer-sign \
--Wno-unused -Wunused-value -Wunused-function \
--Wno-switch -Wno-char-subscripts -Wmissing-prototypes
--Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
--Wold-style-declaration -Wold-style-definition"
-
-# Enable -Wno-format by default when using gcc on mingw since many
-# GCC versions complain about %I64.
-case "${host}" in
- *-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
- *) build_warnings="$build_warnings -Wformat-nonliteral" ;;
-esac
-
-# Check whether --enable-build-warnings was given.
-if test "${enable_build_warnings+set}" = set; then :
- enableval=$enable_build_warnings; case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting compiler warning flags = $build_warnings" 6>&1
-fi
-fi
-# Check whether --enable-sim-build-warnings was given.
-if test "${enable_sim_build_warnings+set}" = set; then :
- enableval=$enable_sim_build_warnings; case "${enableval}" in
- yes) ;;
- no) build_warnings="-w";;
- ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
- *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
-fi
-fi
-WARN_CFLAGS=""
-if test "x${build_warnings}" != x -a "x$GCC" = xyes
-then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking compiler warning flags" >&5
-$as_echo_n "checking compiler warning flags... " >&6; }
- # Separate out the -Werror flag as some files just cannot be
- # compiled with it enabled.
- for w in ${build_warnings}; do
- case $w in
- -Werr*) WERROR_CFLAGS=-Werror ;;
- *) # Check that GCC accepts it
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -Werror $w"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- WARN_CFLAGS="${WARN_CFLAGS} $w"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$saved_CFLAGS"
- esac
- done
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${WARN_CFLAGS} ${WERROR_CFLAGS}" >&5
-$as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; }
-fi
-
-
hardware="cfi core pal glue \
bfin_cec \
bfin_ctimer \
+# Check whether --enable-werror was given.
+if test "${enable_werror+set}" = set; then :
+ enableval=$enable_werror; case "${enableval}" in
+ yes | y) ERROR_ON_WARNING="yes" ;;
+ no | n) ERROR_ON_WARNING="no" ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-werror" "$LINENO" 5 ;;
+ esac
+fi
+
+
+# Enable -Werror by default when using gcc
+if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
+ ERROR_ON_WARNING=yes
+fi
+
+WERROR_CFLAGS=""
+ if test "${ERROR_ON_WARNING}" = yes ; then
+ WERROR_CFLAGS="-Werror"
+ fi
+
+build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
+-Wpointer-sign \
+-Wno-unused -Wunused-value -Wunused-function \
+-Wno-switch -Wno-char-subscripts -Wmissing-prototypes
+-Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
+-Wold-style-declaration -Wold-style-definition"
+
+# Enable -Wno-format by default when using gcc on mingw since many
+# GCC versions complain about %I64.
+case "${host}" in
+ *-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
+ *) build_warnings="$build_warnings -Wformat-nonliteral" ;;
+esac
+
+# Check whether --enable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then :
+ enableval=$enable_build_warnings; case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting compiler warning flags = $build_warnings" 6>&1
+fi
+fi
+# Check whether --enable-sim-build-warnings was given.
+if test "${enable_sim_build_warnings+set}" = set; then :
+ enableval=$enable_sim_build_warnings; case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking compiler warning flags" >&5
+$as_echo_n "checking compiler warning flags... " >&6; }
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) # Check that GCC accepts it
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -Werror $w"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ WARN_CFLAGS="${WARN_CFLAGS} $w"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$saved_CFLAGS"
+ esac
+ done
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${WARN_CFLAGS} ${WERROR_CFLAGS}" >&5
+$as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; }
+fi
+
+
cgen_breaks=""
if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
cgen_breaks="break cgen_rtx_error";
SIM_AC_OPTION_ENDIAN(LITTLE)
SIM_AC_OPTION_DEFAULT_MODEL(bf537)
-SIM_AC_OPTION_WARNINGS
SIM_AC_OPTION_HARDWARE(\
bfin_cec \
bfin_ctimer \
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
fi
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
-SIM_AC_OPTION_WARNINGS
SIM_AC_OUTPUT
+2021-06-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS.
+ * configure: Regenerate.
+
2021-06-12 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT.
enable_maintainer_mode
enable_sim_inline
enable_sim_endian
+enable_sim_default_model
+enable_sim_bitsize
enable_werror
enable_build_warnings
enable_sim_build_warnings
-enable_sim_default_model
-enable_sim_bitsize
enable_sim_hardware
'
ac_precious_vars='build_alias
Specify which functions should be inlined
--enable-sim-endian=endian
Specify target byte endian orientation
+ --enable-sim-default-model=model
+ Specify default model to simulate
+ --enable-sim-bitsize=N Specify target bitsize (32 or 64)
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-default-model=model
- Specify default model to simulate
- --enable-sim-bitsize=N Specify target bitsize (32 or 64)
--enable-sim-hardware=LIST
Specify the hardware to be included in the build.
fi
+# Select the default model for the target.
+riscv_model=
+case "${target}" in
+riscv32*) riscv_model="RV32G" ;;
+riscv*) riscv_model="RV64G" ;;
+esac
+
+default_sim_default_model="${riscv_model}"
+# Check whether --enable-sim-default-model was given.
+if test "${enable_sim_default_model+set}" = set; then :
+ enableval=$enable_sim_default_model; case "${enableval}" in
+ yes|no) as_fn_error $? "\"Missing argument to --enable-sim-default-model\"" "$LINENO" 5;;
+ *) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
+ echo "Setting default model = $sim_default_model" 6>&1
+fi
+else
+ sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"
+fi
+
+
+
+# Select the bitsize of the target.
+riscv_addr_bitsize=
+case "${target}" in
+riscv32*) riscv_addr_bitsize=32 ;;
+riscv*) riscv_addr_bitsize=64 ;;
+esac
+wire_word_bitsize="$riscv_addr_bitsize"
+wire_word_msb=""
+wire_address_bitsize=""
+wire_cell_bitsize=""
+# Check whether --enable-sim-bitsize was given.
+if test "${enable_sim_bitsize+set}" = set; then :
+ enableval=$enable_sim_bitsize; sim_bitsize=
+case "${enableval}" in
+ 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
+ 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
+ 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+ 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+ 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
+ else
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
+ fi ;;
+ 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
+ else
+ sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
+ fi ;;
+ *) as_fn_error $? "\"--enable-sim-bitsize was given $enableval. Expected 32 or 64\"" "$LINENO" 5 ;;
+esac
+# address bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9]*,*//"`
+case x"${tmp}" in
+ x ) ;;
+ x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
+ x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
+ * ) as_fn_error $? "\"--enable-sim-bitsize was given address size $enableval. Expected 32 or 64\"" "$LINENO" 5 ;;
+esac
+# cell bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9*]*,*[0-9]*,*//"`
+case x"${tmp}" in
+ x ) ;;
+ x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
+ x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
+ * ) as_fn_error $? "\"--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64\"" "$LINENO" 5 ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
+ echo "Setting bitsize flags = $sim_bitsize" 6>&1
+fi
+else
+ sim_bitsize=""
+if test x"$wire_word_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
+fi
+if test x"$wire_word_msb" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
+fi
+if test x"$wire_address_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
+fi
+if test x"$wire_cell_bitsize" != x; then
+ sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
+fi
+fi
+
+
+
# Check whether --enable-werror was given.
if test "${enable_werror+set}" = set; then :
enableval=$enable_werror; case "${enableval}" in
fi
-# Select the default model for the target.
-riscv_model=
-case "${target}" in
-riscv32*) riscv_model="RV32G" ;;
-riscv*) riscv_model="RV64G" ;;
-esac
-
-default_sim_default_model="${riscv_model}"
-# Check whether --enable-sim-default-model was given.
-if test "${enable_sim_default_model+set}" = set; then :
- enableval=$enable_sim_default_model; case "${enableval}" in
- yes|no) as_fn_error $? "\"Missing argument to --enable-sim-default-model\"" "$LINENO" 5;;
- *) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
- echo "Setting default model = $sim_default_model" 6>&1
-fi
-else
- sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"
-fi
-
-
-
-# Select the bitsize of the target.
-riscv_addr_bitsize=
-case "${target}" in
-riscv32*) riscv_addr_bitsize=32 ;;
-riscv*) riscv_addr_bitsize=64 ;;
-esac
-wire_word_bitsize="$riscv_addr_bitsize"
-wire_word_msb=""
-wire_address_bitsize=""
-wire_cell_bitsize=""
-# Check whether --enable-sim-bitsize was given.
-if test "${enable_sim_bitsize+set}" = set; then :
- enableval=$enable_sim_bitsize; sim_bitsize=
-case "${enableval}" in
- 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
- 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
- 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
- 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
- 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
- else
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
- fi ;;
- 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
- else
- sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
- fi ;;
- *) as_fn_error $? "\"--enable-sim-bitsize was given $enableval. Expected 32 or 64\"" "$LINENO" 5 ;;
-esac
-# address bitsize
-tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9]*,*//"`
-case x"${tmp}" in
- x ) ;;
- x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
- x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
- * ) as_fn_error $? "\"--enable-sim-bitsize was given address size $enableval. Expected 32 or 64\"" "$LINENO" 5 ;;
-esac
-# cell bitsize
-tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9*]*,*[0-9]*,*//"`
-case x"${tmp}" in
- x ) ;;
- x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
- x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
- * ) as_fn_error $? "\"--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64\"" "$LINENO" 5 ;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
- echo "Setting bitsize flags = $sim_bitsize" 6>&1
-fi
-else
- sim_bitsize=""
-if test x"$wire_word_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
-fi
-if test x"$wire_word_msb" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
-fi
-if test x"$wire_address_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
-fi
-if test x"$wire_cell_bitsize" != x; then
- sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
-fi
-fi
-
-
-
hardware="cfi core pal glue "
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
SIM_AC_COMMON
SIM_AC_OPTION_ENDIAN(LITTLE)
-SIM_AC_OPTION_WARNINGS
# Select the default model for the target.
riscv_model=
projects / binutils-gdb.git / commitdiff