2002-10-02 Nathanael Nerode <neroden@gcc.gnu.org>
+ * Makefile.tpl: Remove material now in src-release. (Finally!)
+ * Makefile.in: Regenerate.
+
* configure: Restore my original patch by syncing with gcc version.
* Bring following over from gcc:
LD = ld
-BZIPPROG = bzip2
-MD5PROG = md5sum
-
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
$(SHELL) ./config.status
#
-# Support for building net releases
-
-# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.if config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
- COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap \
- libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
-
-# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info* configure.texi configure.info* \
- configbuild.* configdev.*
-
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-# NOTE: No double quotes in the below. It is used within shell script
-# as VER="$(VER)"
-VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif test -f $(TOOL)/version.in; then \
- head -1 $(TOOL)/version.in; \
- elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
- sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
- else \
- echo VERSION; \
- fi`
-PACKAGE = $(TOOL)
-
-.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-tar
-gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-djunpack \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-taz
-gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in gdb-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: do-proto-toplev
-do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- echo "==> Making $(PACKAGE)-$(VER)/"
- # Take out texinfo from a few places.
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- <Makefile.in >tmp
- mv -f tmp Makefile.in
- #
- ./configure sun4
- [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
- || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
- ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
- CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
- # Make links, and run "make diststuff" or "make info" when needed.
- rm -rf proto-toplev ; mkdir proto-toplev
- set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- for d in $$dirs ; do \
- if [ -d $$d ]; then \
- if [ ! -f $$d/Makefile ] ; then true ; \
- elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
- elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
- fi ; \
- if [ -d $$d/proto-$$d.dir ]; then \
- ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
- else \
- ln -s ../$$d proto-toplev/$$d ; \
- fi ; \
- else ln -s ../$$d proto-toplev/$$d ; fi ; \
- done
- cd etc && $(MAKE) info
- $(MAKE) distclean
- #
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; \
- for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- #
- # Take out texinfo from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- <configure.in >proto-toplev/configure.in
- #
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- if test -r texinfo/util/tex3patch ; then \
- mkdir proto-toplev/texinfo/util && \
- ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
- else true; fi
- chmod -R og=u . || chmod og=u `find . -print`
- #
- # Create .gmo files from .po files.
- for f in `find . -name '*.po' -type f -print`; do \
- msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
- done
- #
- -rm -f $(PACKAGE)-$(VER)
- ln -s proto-toplev $(PACKAGE)-$(VER)
-
-.PHONY: do-tar
-do-tar:
- echo "==> Making $(PACKAGE)-$(VER).tar"
- -rm -f $(PACKAGE)-$(VER).tar
- find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
- | tar cTfh - $(PACKAGE)-$(VER).tar
-
-.PHONY: do-bz2
-do-bz2:
- echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
- $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
-
-.PHONY: do-md5sum
-do-md5sum:
- echo "==> Adding md5 checksum to top-level directory"
- cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
- | xargs $(MD5PROG) > ../md5.sum
- mv md5.sum proto-toplev
-
-.PHONY: do-djunpack
-do-djunpack:
- echo "==> Adding updated djunpack.bat to top-level directory"
- echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
- sed < djunpack.bat > djunpack.new \
- -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
- mv djunpack.new djunpack.bat
- -rm -f proto-toplev/djunpack.bat
- ln -s ../djunpack.bat proto-toplev/djunpack.bat
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.bz2
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
-gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
-binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
- $(MAKE) -f Makefile.in taz TOOL=binutils \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
-
-.PHONY: gas+binutils.tar.bz2
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
- $(MAKE) -f Makefile.in taz TOOL=gnats \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
-gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: gdb.tar
-gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-
-DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
-.PHONY: dejagnu.tar.bz2
-dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
- $(MAKE) -f Makefile.in taz TOOL=dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
-
-.PHONY: gdb+dejagnu.tar.bz2
-GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
-gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-.PHONY: gdb+dejagnu.tar
-gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-
-.PHONY: insight.tar.bz2
-INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
-insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-.PHONY: insight.tar
-insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-
-.PHONY: insight+dejagnu.tar.bz2
-INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
-insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-.PHONY: insight+dejagnu.tar
-insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-
-.PHONY: newlib.tar.bz2
-NEWLIB_SUPPORT_DIRS=libgloss
-# taz configures for the sun4 target which won't configure newlib.
-# We need newlib configured so that the .info files are made.
-# Unfortunately, it is not enough to just configure newlib separately:
-# taz will build the .info files but since SUBDIRS won't contain newlib,
-# distclean won't be run (leaving Makefile, config.status, and the tmp files
-# used in building the .info files, eg: *.def, *.ref).
-# The problem isn't solvable however without a lot of extra work because
-# target libraries are built in subdir $(target_alias) which gets nuked during
-# the make distclean. For now punt on the issue of shipping newlib info files
-# with newlib net releases and wait for a day when some native target (sun4?)
-# supports newlib (if only minimally).
-newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
- $(MAKE) -f Makefile.in taz TOOL=newlib \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
- DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=
LD = ld
-BZIPPROG = bzip2
-MD5PROG = md5sum
-
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
$(SHELL) ./config.status
#
-# Support for building net releases
-
-# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.if config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
- COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap \
- libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
-
-# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info* configure.texi configure.info* \
- configbuild.* configdev.*
-
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-# NOTE: No double quotes in the below. It is used within shell script
-# as VER="$(VER)"
-VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif test -f $(TOOL)/version.in; then \
- head -1 $(TOOL)/version.in; \
- elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
- sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
- else \
- echo VERSION; \
- fi`
-PACKAGE = $(TOOL)
-
-.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-tar
-gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-djunpack \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-taz
-gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in gdb-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: do-proto-toplev
-do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- echo "==> Making $(PACKAGE)-$(VER)/"
- # Take out texinfo from a few places.
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- <Makefile.in >tmp
- mv -f tmp Makefile.in
- #
- ./configure sun4
- [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
- || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
- ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
- CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
- # Make links, and run "make diststuff" or "make info" when needed.
- rm -rf proto-toplev ; mkdir proto-toplev
- set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- for d in $$dirs ; do \
- if [ -d $$d ]; then \
- if [ ! -f $$d/Makefile ] ; then true ; \
- elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
- elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
- fi ; \
- if [ -d $$d/proto-$$d.dir ]; then \
- ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
- else \
- ln -s ../$$d proto-toplev/$$d ; \
- fi ; \
- else ln -s ../$$d proto-toplev/$$d ; fi ; \
- done
- cd etc && $(MAKE) info
- $(MAKE) distclean
- #
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; \
- for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- #
- # Take out texinfo from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- <configure.in >proto-toplev/configure.in
- #
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- if test -r texinfo/util/tex3patch ; then \
- mkdir proto-toplev/texinfo/util && \
- ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
- else true; fi
- chmod -R og=u . || chmod og=u `find . -print`
- #
- # Create .gmo files from .po files.
- for f in `find . -name '*.po' -type f -print`; do \
- msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
- done
- #
- -rm -f $(PACKAGE)-$(VER)
- ln -s proto-toplev $(PACKAGE)-$(VER)
-
-.PHONY: do-tar
-do-tar:
- echo "==> Making $(PACKAGE)-$(VER).tar"
- -rm -f $(PACKAGE)-$(VER).tar
- find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
- | tar cTfh - $(PACKAGE)-$(VER).tar
-
-.PHONY: do-bz2
-do-bz2:
- echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
- $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
-
-.PHONY: do-md5sum
-do-md5sum:
- echo "==> Adding md5 checksum to top-level directory"
- cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
- | xargs $(MD5PROG) > ../md5.sum
- mv md5.sum proto-toplev
-
-.PHONY: do-djunpack
-do-djunpack:
- echo "==> Adding updated djunpack.bat to top-level directory"
- echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
- sed < djunpack.bat > djunpack.new \
- -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
- mv djunpack.new djunpack.bat
- -rm -f proto-toplev/djunpack.bat
- ln -s ../djunpack.bat proto-toplev/djunpack.bat
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.bz2
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
-gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
-binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
- $(MAKE) -f Makefile.in taz TOOL=binutils \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
-
-.PHONY: gas+binutils.tar.bz2
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
- $(MAKE) -f Makefile.in taz TOOL=gnats \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
-gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: gdb.tar
-gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-
-DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
-.PHONY: dejagnu.tar.bz2
-dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
- $(MAKE) -f Makefile.in taz TOOL=dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
-
-.PHONY: gdb+dejagnu.tar.bz2
-GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
-gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-.PHONY: gdb+dejagnu.tar
-gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-
-.PHONY: insight.tar.bz2
-INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
-insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-.PHONY: insight.tar
-insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-
-.PHONY: insight+dejagnu.tar.bz2
-INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
-insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-.PHONY: insight+dejagnu.tar
-insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-
-.PHONY: newlib.tar.bz2
-NEWLIB_SUPPORT_DIRS=libgloss
-# taz configures for the sun4 target which won't configure newlib.
-# We need newlib configured so that the .info files are made.
-# Unfortunately, it is not enough to just configure newlib separately:
-# taz will build the .info files but since SUBDIRS won't contain newlib,
-# distclean won't be run (leaving Makefile, config.status, and the tmp files
-# used in building the .info files, eg: *.def, *.ref).
-# The problem isn't solvable however without a lot of extra work because
-# target libraries are built in subdir $(target_alias) which gets nuked during
-# the make distclean. For now punt on the issue of shipping newlib info files
-# with newlib net releases and wait for a day when some native target (sun4?)
-# supports newlib (if only minimally).
-newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
- $(MAKE) -f Makefile.in taz TOOL=newlib \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
- DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=
projects / binutils-gdb.git / commitdiff