+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * config-ml.in: Remove references to GCJ.
+ * configure.ac: Likewise.
+ * configure: Regenerate.
+
2016-11-01 Josh Conner <joshconner@google.com>
* MAINTAINERS (Write After Approval): Update email address,
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-03-29 Samuel Thibault <samuel.thibault@ens-lyon.org>
* configure.host: Set gc_use_mmap on *-kfreebsd-gnu* and *-gnu*.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
ADAFLAGS="$(ADAFLAGS) $${flags}" \
prefix="$(prefix)" \
exec_prefix="$(exec_prefix)" \
- GCJFLAGS="$(GCJFLAGS) $${flags}" \
GOCFLAGS="$(GOCFLAGS) $${flags}" \
CXXFLAGS="$(CXXFLAGS) $${flags}" \
LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
break
fi
done
- ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags" F77="${F77_}$flags" GCJ="${GCJ_}$flags" GFORTRAN="${GFORTRAN_}$flags" GOC="${GOC_}$flags"'
+ ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags" F77="${F77_}$flags" GFORTRAN="${GFORTRAN_}$flags" GOC="${GOC_}$flags"'
if [ "${with_target_subdir}" = "." ]; then
CC_=$CC' '
CXX_=$CXX' '
F77_=$F77' '
- GCJ_=$GCJ' '
GFORTRAN_=$GFORTRAN' '
GOC_=$GOC' '
else
esac
done
- GCJ_=
- for arg in ${GCJ}; do
- case $arg in
- -[BIL]"${ML_POPDIR}"/*)
- GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
- "${ML_POPDIR}"/*)
- GCJ_="${GCJ_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
- *)
- GCJ_="${GCJ_}${arg} " ;;
- esac
- done
-
GFORTRAN_=
for arg in ${GFORTRAN}; do
case $arg in
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ multi.m4: Don't set GCJ.
+
2016-06-21 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* elf.m4: Remove interix support.
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
CC="$CC"
CXX="$CXX"
-GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"])])dnl
+GFORTRAN="$GFORTRAN"])])dnl
AR_FOR_TARGET
GOC_FOR_TARGET
GFORTRAN_FOR_TARGET
-GCJ_FOR_TARGET
GCC_FOR_TARGET
CXX_FOR_TARGET
CC_FOR_TARGET
LDFLAGS_FOR_BUILD
GOC_FOR_BUILD
GFORTRAN_FOR_BUILD
-GCJ_FOR_BUILD
DLLTOOL_FOR_BUILD
CXX_FOR_BUILD
CXXFLAGS_FOR_BUILD
CC_FOR_TARGET
CXX_FOR_TARGET
GCC_FOR_TARGET
-GCJ_FOR_TARGET
GFORTRAN_FOR_TARGET
GOC_FOR_TARGET
AR_FOR_TARGET
CXX for the target
GCC_FOR_TARGET
GCC for the target
- GCJ_FOR_TARGET
- GCJ for the target
GFORTRAN_FOR_TARGET
GFORTRAN for the target
GOC_FOR_TARGET
AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
- GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
AS_FOR_BUILD="\$(AS)"
CC_FOR_BUILD="\$(CC)"
CXX_FOR_BUILD="\$(CXX)"
- GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
-
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
-if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET=$GCJ_FOR_TARGET
-elif test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
- GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
- for ncn_progname in gcj; do
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test -n "$with_build_time_tools"; then
- for ncn_progname in gcj; do
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
- if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- break
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
- for ncn_progname in gcj; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
- done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
- set dummy gcj
- if test $build = $target ; then
- GCJ_FOR_TARGET="$2"
- else
- GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
-else
- GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-fi
-
-
-
if test -n "$GFORTRAN_FOR_TARGET"; then
ac_cv_prog_GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET
elif test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
- GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
AS_FOR_BUILD="\$(AS)"
CC_FOR_BUILD="\$(CC)"
CXX_FOR_BUILD="\$(CXX)"
- GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
AC_SUBST(CXXFLAGS_FOR_BUILD)
AC_SUBST(CXX_FOR_BUILD)
AC_SUBST(DLLTOOL_FOR_BUILD)
-AC_SUBST(GCJ_FOR_BUILD)
AC_SUBST(GFORTRAN_FOR_BUILD)
AC_SUBST(GOC_FOR_BUILD)
AC_SUBST(LDFLAGS_FOR_BUILD)
NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
-NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo)
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * doc/install.texi: Remove references to gcj/libjava.
+ * doc/invoke.texi: Likewise.
+
2016-11-15 Jeff Law <law@redhat.com>
* tree-ssa-threadbackward.c (fsm_find_thread_path): Remove unneeded
Used by various scripts to generate some files included in SVN (mainly
Unicode-related and rarely changing) from source tables.
-@item @command{jar}, or InfoZIP (@command{zip} and @command{unzip})
-
-Necessary to build libgcj, the GCJ runtime.
-
@end table
Several support libraries are necessary to build GCC, some are required,
tools.
@end table
-@subheading Java-Specific Options
-
-The following option applies to the build of the Java front end.
-
-@table @code
-@item --disable-libgcj
-Specify that the run-time libraries
-used by GCJ should not be built. This is useful in case you intend
-to use GCJ with some other run-time, or you're going to install it
-separately, or it just happens not to build on your particular
-machine. In general, if the Java front end is enabled, the GCJ
-libraries will be enabled too, unless they're known to not work on
-the target platform. If GCJ is enabled but @samp{libgcj} isn't built, you
-may need to port it; in this case, before modifying the top-level
-@file{configure.ac} so that @samp{libgcj} is enabled by default on this platform,
-you may use @option{--enable-libgcj} to override the default.
-
-@end table
-
-The following options apply to building @samp{libgcj}.
-
-@subsubheading General Options
-
-@table @code
-@item --enable-java-maintainer-mode
-By default the @samp{libjava} build will not attempt to compile the
-@file{.java} source files to @file{.class}. Instead, it will use the
-@file{.class} files from the source tree. If you use this option you
-must have executables named @command{ecj1} and @command{gjavah} in your path
-for use by the build. You must use this option if you intend to
-modify any @file{.java} files in @file{libjava}.
-
-@item --with-java-home=@var{dirname}
-This @samp{libjava} option overrides the default value of the
-@samp{java.home} system property. It is also used to set
-@samp{sun.boot.class.path} to @file{@var{dirname}/lib/rt.jar}. By
-default @samp{java.home} is set to @file{@var{prefix}} and
-@samp{sun.boot.class.path} to
-@file{@var{datadir}/java/libgcj-@var{version}.jar}.
-
-@item --with-ecj-jar=@var{filename}
-This option can be used to specify the location of an external jar
-file containing the Eclipse Java compiler. A specially modified
-version of this compiler is used by @command{gcj} to parse
-@file{.java} source files. If this option is given, the
-@samp{libjava} build will create and install an @file{ecj1} executable
-which uses this jar file at runtime.
-
-If this option is not given, but an @file{ecj.jar} file is found in
-the topmost source tree at configure time, then the @samp{libgcj}
-build will create and install @file{ecj1}, and will also install the
-discovered @file{ecj.jar} into a suitable place in the install tree.
-
-If @file{ecj1} is not installed, then the user will have to supply one
-on his path in order for @command{gcj} to properly parse @file{.java}
-source files. A suitable jar is available from
-@uref{ftp://sourceware.org/pub/java/}.
-
-@item --disable-getenv-properties
-Don't set system properties from @env{GCJ_PROPERTIES}.
-
-@item --enable-hash-synchronization
-Use a global hash table for monitor locks. Ordinarily,
-@samp{libgcj}'s @samp{configure} script automatically makes
-the correct choice for this option for your platform. Only use
-this if you know you need the library to be configured differently.
-
-@item --enable-interpreter
-Enable the Java interpreter. The interpreter is automatically
-enabled by default on all platforms that support it. This option
-is really only useful if you want to disable the interpreter
-(using @option{--disable-interpreter}).
-
-@item --disable-java-net
-Disable java.net. This disables the native part of java.net only,
-using non-functional stubs for native method implementations.
-
-@item --disable-jvmpi
-Disable JVMPI support.
-
-@item --disable-libgcj-bc
-Disable BC ABI compilation of certain parts of libgcj. By default,
-some portions of libgcj are compiled with @option{-findirect-dispatch}
-and @option{-fno-indirect-classes}, allowing them to be overridden at
-run-time.
-
-If @option{--disable-libgcj-bc} is specified, libgcj is built without
-these options. This allows the compile-time linker to resolve
-dependencies when statically linking to libgcj. However it makes it
-impossible to override the affected portions of libgcj at run-time.
-
-@item --enable-reduced-reflection
-Build most of libgcj with @option{-freduced-reflection}. This reduces
-the size of libgcj at the expense of not being able to do accurate
-reflection on the classes it contains. This option is safe if you
-know that code using libgcj will never use reflection on the standard
-runtime classes in libgcj (including using serialization, RMI or CORBA).
-
-@item --with-ecos
-Enable runtime eCos target support.
-
-@item --without-libffi
-Don't use @samp{libffi}. This will disable the interpreter and JNI
-support as well, as these require @samp{libffi} to work.
-
-@item --enable-libgcj-debug
-Enable runtime debugging code.
-
-@item --enable-libgcj-multifile
-If specified, causes all @file{.java} source files to be
-compiled into @file{.class} files in one invocation of
-@samp{gcj}. This can speed up build time, but is more
-resource-intensive. If this option is unspecified or
-disabled, @samp{gcj} is invoked once for each @file{.java}
-file to compile into a @file{.class} file.
-
-@item --with-libiconv-prefix=DIR
-Search for libiconv in @file{DIR/include} and @file{DIR/lib}.
-
-@item --enable-sjlj-exceptions
-Force use of the @code{setjmp}/@code{longjmp}-based scheme for exceptions.
-@samp{configure} ordinarily picks the correct value based on the platform.
-Only use this option if you are sure you need a different setting.
-
-@item --with-system-zlib
-Use installed @samp{zlib} rather than that included with GCC@.
-
-@item --with-win32-nlsapi=ansi, unicows or unicode
-Indicates how MinGW @samp{libgcj} translates between UNICODE
-characters and the Win32 API@.
-
-@item --enable-java-home
-If enabled, this creates a JPackage compatible SDK environment during install.
-Note that if --enable-java-home is used, --with-arch-directory=ARCH must also
-be specified.
-
-@item --with-arch-directory=ARCH
-Specifies the name to use for the @file{jre/lib/ARCH} directory in the SDK
-environment created when --enable-java-home is passed. Typical names for this
-directory include i386, amd64, ia64, etc.
-
-@item --with-os-directory=DIR
-Specifies the OS directory for the SDK include directory. This is set to auto
-detect, and is typically 'linux'.
-
-@item --with-origin-name=NAME
-Specifies the JPackage origin name. This defaults to the 'gcj' in
-java-1.5.0-gcj.
-
-@item --with-arch-suffix=SUFFIX
-Specifies the suffix for the sdk directory. Defaults to the empty string.
-Examples include '.x86_64' in 'java-1.5.0-gcj-1.5.0.0.x86_64'.
-
-@item --with-jvm-root-dir=DIR
-Specifies where to install the SDK. Default is $(prefix)/lib/jvm.
-
-@item --with-jvm-jar-dir=DIR
-Specifies where to install jars. Default is $(prefix)/lib/jvm-exports.
-
-@item --with-python-dir=DIR
-Specifies where to install the Python modules used for aot-compile. DIR should
-not include the prefix used in installation. For example, if the Python modules
-are to be installed in /usr/lib/python2.5/site-packages, then
---with-python-dir=/lib/python2.5/site-packages should be passed. If this is
-not specified, then the Python modules are installed in $(prefix)/share/python.
-
-@item --enable-aot-compile-rpm
-Adds aot-compile-rpm to the list of installed scripts.
-
-@item --enable-browser-plugin
-Build the gcjwebplugin web browser plugin.
-
-@item --enable-static-libjava
-Build static libraries in libjava. The default is to only build shared
-libraries.
-
-@table @code
-@item ansi
-Use the single-byte @code{char} and the Win32 A functions natively,
-translating to and from UNICODE when using these functions. If
-unspecified, this is the default.
-
-@item unicows
-Use the @code{WCHAR} and Win32 W functions natively. Adds
-@code{-lunicows} to @file{libgcj.spec} to link with @samp{libunicows}.
-@file{unicows.dll} needs to be deployed on Microsoft Windows 9X machines
-running built executables. @file{libunicows.a}, an open-source
-import library around Microsoft's @code{unicows.dll}, is obtained from
-@uref{http://libunicows.sourceforge.net/}, which also gives details
-on getting @file{unicows.dll} from Microsoft.
-
-@item unicode
-Use the @code{WCHAR} and Win32 W functions natively. Does @emph{not}
-add @code{-lunicows} to @file{libgcj.spec}. The built executables will
-only run on Microsoft Windows NT and above.
-@end table
-@end table
-
-@subsubheading AWT-Specific Options
-
-@table @code
-@item --with-x
-Use the X Window System.
-
-@item --enable-java-awt=PEER(S)
-Specifies the AWT peer library or libraries to build alongside
-@samp{libgcj}. If this option is unspecified or disabled, AWT
-will be non-functional. Current valid values are @option{gtk} and
-@option{xlib}. Multiple libraries should be separated by a
-comma (i.e.@: @option{--enable-java-awt=gtk,xlib}).
-
-@item --enable-gtk-cairo
-Build the cairo Graphics2D implementation on GTK@.
-
-@item --enable-java-gc=TYPE
-Choose garbage collector. Defaults to @option{boehm} if unspecified.
-
-@item --disable-gtktest
-Do not try to compile and run a test GTK+ program.
-
-@item --disable-glibtest
-Do not try to compile and run a test GLIB program.
-
-@item --with-libart-prefix=PFX
-Prefix where libart is installed (optional).
-
-@item --with-libart-exec-prefix=PFX
-Exec prefix where libart is installed (optional).
-
-@item --disable-libarttest
-Do not try to compile and run a test libart program.
-
-@end table
-
@subsubheading Overriding @command{configure} test results
Sometimes, it might be necessary to override the result of some
across different shared libraries. In that case, each of the libraries
as well as the application itself should use the shared @file{libgcc}.
-Therefore, the G++ and GCJ drivers automatically add
-@option{-shared-libgcc} whenever you build a shared library or a main
-executable, because C++ and Java programs typically use exceptions, so
-this is the right thing to do.
+Therefore, the G++ and driver automatically adds @option{-shared-libgcc}
+ whenever you build a shared library or a main executable, because C++
+ programs typically use exceptions, so this is the right thing to do.
If, instead, you use the GCC driver to create shared libraries, you may
find that they are not always linked with the shared @file{libgcc}.
costs at library load time.
However, if a library or main executable is supposed to throw or catch
-exceptions, you must link it using the G++ or GCJ driver, as appropriate
+exceptions, you must link it using the G++ driver, as appropriate
for the languages used in the program, or using the option
@option{-shared-libgcc}, such that it is linked with the shared
@file{libgcc}.
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2015-08-06 Yaakov Selkowitz <yselkowi@redhat.com>
* configure: Reflects renaming of configure.in to configure.ac
USE_INCLUDED_LIBINTL
BUILD_INCLUDED_LIBINTL
INTLBISON
+LTLIBICONV
+LIBICONV
GLIBC21
ALLOCA
EGREP
ac_user_opts='
enable_option_checking
enable_nls
-with_libiconv_prefix
with_gnu_ld
enable_rpath
+with_libiconv_prefix
with_included_gettext
with_libintl_prefix
enable_maintainer_mode
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-libiconv-prefix=DIR
- search for libiconv in DIR/include and DIR/lib
--with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
--with-included-gettext use the GNU gettext library included here
--with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
--without-libintl-prefix don't search for libintl in includedir and libdir
fi
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
- for ac_header in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
-stdlib.h string.h unistd.h sys/param.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
fi
-done
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
- for ac_func in feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
-geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
-strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \
-__fsetlocking
-do :
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
fi
-done
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
# Check whether --with-libiconv-prefix was given.
if test "${with_libiconv_prefix+set}" = set; then :
withval=$with_libiconv_prefix;
- for dir in `echo "$withval" | tr : ' '`; do
- if test -d $dir/include; then LIBICONV_INCLUDE="-I$dir/include"; fi
- if test -d $dir/lib; then LIBICONV_LIBDIR="-L$dir/lib"; fi
- done
-
-fi
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
- BUILD_LIBICONV_LIBDIRS="../libiconv/lib/.libs ../libiconv/lib/_libs"
- BUILD_LIBICONV_INCLUDE="-I../libiconv/include"
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if test "${am_cv_func_iconv+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- am_cv_use_build_libiconv=no
- am_cv_build_libiconv_path=
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
- # First, try to find iconv in libc.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- # If libiconv is part of the build tree, then try using it over
- # any system libiconv.
- if test "$am_cv_func_iconv" != yes && test -d ../libiconv; then
- for lib_dir in $BUILD_LIBICONV_LIBDIRS; do
- am_save_LIBS="$LIBS"
- am_save_CPPFLAGS="$CPPFLAGS"
- LIBS="$LIBS $lib_dir/libiconv.a"
- CPPFLAGS="$CPPFLAGS $BUILD_LIBICONV_INCLUDE"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_use_build_libiconv=yes
- am_cv_build_libiconv_path=$lib_dir/libiconv.a
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+ for ac_header in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ for ac_func in feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
+geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
+strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \
+__fsetlocking
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if test "${am_cv_func_iconv+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ am_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CPPFLAGS="$am_save_CPPFLAGS"
+
+ if test "$am_cv_func_iconv" != yes && test -d ../libiconv; then
+ for _libs in .libs _libs; do
+ am_save_CPPFLAGS="$CPPFLAGS"
+ am_save_LIBS="$LIBS"
+ CPPFLAGS="$CPPFLAGS -I../libiconv/include"
+ LIBS="$LIBS ../libiconv/lib/$_libs/libiconv.a"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ INCICONV="-I../libiconv/include"
+ LIBICONV='${top_builddir}'/../libiconv/lib/$_libs/libiconv.a
+ LTLIBICONV='${top_builddir}'/../libiconv/lib/libiconv.la
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
CPPFLAGS="$am_save_CPPFLAGS"
- if test "$am_cv_use_build_libiconv" = "yes"; then
+ LIBS="$am_save_LIBS"
+ if test "$am_cv_func_iconv" = "yes"; then
break
fi
done
fi
- # If iconv was not in libc, try -liconv. In this case, arrange to
- # look in the libiconv prefix, if it was specified by the user.
if test "$am_cv_func_iconv" != yes; then
am_save_CPPFLAGS="$CPPFLAGS"
am_save_LIBS="$LIBS"
- if test -n "$LIBICONV_INCLUDE"; then
- CPPFLAGS="$CPPFLAGS $LIBICONV_INCLUDE"
- LIBS="$LIBS $LIBICONV_LIBDIR"
- fi
- LIBS="$LIBS -liconv"
+ CPPFLAGS="$LIBS $INCICONV"
+ LIBS="$LIBS $LIBICONV"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <stdlib.h>
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
CPPFLAGS="$am_save_CPPFLAGS"
+ LIBS="$am_save_LIBS"
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
$as_echo "$am_cv_func_iconv" >&6; }
+ if test "$am_cv_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
- # Set the various flags based on the cache variables. We can't rely
- # on the flags to remain set from the above code, due to caching.
- LIBICONV=
+ fi
if test "$am_cv_lib_iconv" = yes; then
- LIBICONV="-liconv"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
else
- LIBICONV_LIBDIR=
- LIBICONV_INCLUDE=
+ LIBICONV=
+ LTLIBICONV=
fi
- if test "$am_cv_use_build_libiconv" = yes; then
- LIBICONV="$am_cv_build_libiconv_path"
- LIBICONV_LIBDIR=""
- LIBICONV_INCLUDE="$BUILD_LIBICONV_INCLUDE"
- fi
- CPPFLAGS="$CPPFLAGS $LIBICONV_INCLUDE"
- LIBS="$LIBS $LIBICONV_LIBDIR $LIBICONV"
- if test "$am_cv_func_iconv" = yes; then
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+ if test "$am_cv_func_iconv" = yes; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
$as_echo_n "checking for iconv declaration... " >&6; }
if test "${am_cv_proto_iconv+set}" = set; then :
fi
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${acl_cv_path_LD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${acl_cv_prog_gnu_ld+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- acl_cv_prog_gnu_ld=yes
-else
- acl_cv_prog_gnu_ld=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if test "${acl_cv_rpath+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-04-30 Oleg Endo <olegendo@gcc.gnu.org>
* configure: Remove SH5 support.
;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
;;
- i[34567]86-*-interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
i[34567]86-*-nto-qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
_ACEOF
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-04-27 Sebastian Huber <sebastian.huber@embedded-brains.de>
* configure.tgt (configure_tgt_pre_target_cpu_XCFLAGS): New variable.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-09-11 Carlos Liam <carlos@aarzee.me>
* all: Remove meaningless trailing whitespace.
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
# The HP-UX ksh and POSIX shell print the target directory to stdout
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-05-10 Matthias Klose <doko@ubuntu.com>
* configure.ac: Move AC_USE_SYSTEM_EXTENSIONS behind AM_ENABLE_MULTILIB.
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-01-04 Jakub Jelinek <jakub@redhat.com>
Update copyright years.
# See config/warnings.m4 for details.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
WARN_CFLAGS=
save_CFLAGS="$CFLAGS"
for real_option in -W -Wall -Wwrite-strings -Wstrict-prototypes \
fi
done
CFLAGS="$save_CFLAGS"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
WARN_PEDANTIC=
# Do the check with the no- prefix removed from the warning options
fi
fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
# Only enable with --enable-werror-always until existing warnings are
# corrected.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
WERROR=
# Check whether --enable-werror-always was given.
if test "${enable_werror_always+set}" = set; then :
WERROR="$WERROR${WERROR:+ }-Werror"
fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
# Checks for header files.
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-09-04 John David Anglin <danglin@gcc.gnu.org>
* src/pa/ffi.c (ffi_struct_type): Put type declaration on separate line.
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-11-03 Fritz Reese <fritzoreese@gmail.com>
* io/io.h (IOPARM_DT_DEFAULT_EXP): New flag bit.
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
fi
AC_SUBST(install_sh)])
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
esac
])
+# Copyright (C) 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2012
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_ENABLE_MULTILIB([MAKEFILE], [REL-TO-TOP-SRCDIR])
+# ---------------------------------------------------
+# Add --enable-multilib to configure.
+AC_DEFUN([AM_ENABLE_MULTILIB],
+[m4_warn([obsolete], [$0 will be removed from Automake core soon.
+Files implementing the "multilib" feature are (and will remain) available
+to the 'contrib/' directory in the Automake distribution.])]dnl
+[# Default to --enable-multilib
+AC_ARG_ENABLE(multilib,
+[ --enable-multilib build many library versions (default)],
+[case "$enableval" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) AC_MSG_ERROR([bad value $enableval for multilib option]) ;;
+ esac],
+ [multilib=yes])
+
+# We may get other options which we leave undocumented:
+# --with-target-subdir, --with-multisrctop, --with-multisubdir
+# See config-ml.in if you want the gory details.
+
+if test "$srcdir" = "."; then
+ if test "$with_target_subdir" != "."; then
+ multi_basedir="$srcdir/$with_multisrctop../$2"
+ else
+ multi_basedir="$srcdir/$with_multisrctop$2"
+ fi
+else
+ multi_basedir="$srcdir/$2"
+fi
+AC_SUBST(multi_basedir)
+
+# Even if the default multilib is not a cross compilation,
+# it may be that some of the other multilibs are.
+if test $cross_compiling = no && test $multilib = yes \
+ && test "x${with_multisubdir}" != x ; then
+ cross_compiling=maybe
+fi
+
+AC_OUTPUT_COMMANDS([
+# Only add multilib support code if we just rebuilt the top-level
+# Makefile.
+case " $CONFIG_FILES " in
+ *" ]m4_default([$1],Makefile)[ "*)
+ ac_file=]m4_default([$1],Makefile)[ . ${multi_basedir}/config-ml.in
+ ;;
+esac],
+ [
+srcdir="$srcdir"
+host="$host"
+target="$target"
+with_multisubdir="$with_multisubdir"
+with_multisrctop="$with_multisrctop"
+with_target_subdir="$with_target_subdir"
+ac_configure_args="${multilib_arg} ${ac_configure_args}"
+multi_basedir="$multi_basedir"
+CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+CC="$CC"])])dnl
+
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
-m4_include([../config/depstand.m4])
-m4_include([../config/lead-dot.m4])
-m4_include([../config/multi.m4])
-m4_include([../config/override.m4])
-m4_include([../config/unwind_ipinfo.m4])
m4_include([config/go.m4])
m4_include([config/libtool.m4])
m4_include([config/ltoptions.m4])
enable_version_specific_runtime_libs
with_libffi
with_libatomic
-with_system_libunwind
'
ac_precious_vars='build_alias
host_alias
both]
--without-libffi don't use libffi
--without-libatomic don't use libatomic
- --with-system-libunwind use installed libunwind
Some influential environment variables:
CC C compiler command
-
-
-
ac_config_headers="$ac_config_headers config.h"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
+#include <stdio.h>
int
main ()
{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
;
return 0;
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11104 "configure"
+#line 11101 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11210 "configure"
+#line 11207 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
esac
-
-
-# Check whether --with-system-libunwind was given.
-if test "${with_system_libunwind+set}" = set; then :
- withval=$with_system_libunwind;
-fi
-
- # If system-libunwind was not specifically set, pick a default setting.
- if test x$with_system_libunwind = x; then
- case ${target} in
- ia64-*-hpux*) with_system_libunwind=yes ;;
- *) with_system_libunwind=no ;;
- esac
- fi
- # Based on system-libunwind and target, do we have ipinfo?
- if test x$with_system_libunwind = xyes; then
- case ${target} in
- ia64-*-*) have_unwind_getipinfo=no ;;
- *) have_unwind_getipinfo=yes ;;
- esac
- else
- # Darwin before version 9 does not have _Unwind_GetIPInfo.
-
- case ${target} in
- *-*-darwin[3-8]|*-*-darwin[3-8].*) have_unwind_getipinfo=no ;;
- *) have_unwind_getipinfo=yes ;;
- esac
-
- fi
-
- if test x$have_unwind_getipinfo = xyes; then
-
-$as_echo "#define HAVE_GETIPINFO 1" >>confdefs.h
-
- fi
-
+GCC_CHECK_UNWIND_GETIPINFO
for ac_header in port.h sched.h semaphore.h sys/file.h sys/mman.h syscall.h sys/epoll.h sys/event.h sys/inotify.h sys/ptrace.h sys/syscall.h sys/user.h sys/utsname.h sys/select.h sys/socket.h net/if.h net/if_arp.h net/route.h netpacket/packet.h sys/prctl.h sys/mount.h sys/vfs.h sys/statfs.h sys/timex.h sys/sysinfo.h utime.h linux/ether.h linux/fs.h linux/reboot.h netinet/icmp6.h netinet/in_syst.h netinet/ip.h netinet/ip_mroute.h netinet/if_ether.h
do :
multi_basedir="$multi_basedir"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
CC="$CC"
-CXX="$CXX"
-GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-11-10 Jakub Jelinek <jakub@redhat.com>
* omp_lib.f90.in (openmp_version): Change to 201511 from 201307.
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-sinclude(../config/acx.m4)
-sinclude(../config/no-executables.m4)
-sinclude(../config/override.m4)
-sinclude(../config/picflag.m4)
-sinclude(../config/warnings.m4)
-
-dnl See whether strncmp reads past the end of its string parameters.
-dnl On some versions of SunOS4 at least, strncmp reads a word at a time
-dnl but erroneously reads past the end of strings. This can cause
-dnl a SEGV in some cases.
-AC_DEFUN(libiberty_AC_FUNC_STRNCMP,
-[AC_REQUIRE([AC_FUNC_MMAP])
-AC_CACHE_CHECK([for working strncmp], ac_cv_func_strncmp_works,
-[AC_TRY_RUN([
-/* Test by Jim Wilson and Kaveh Ghazi.
- Check whether strncmp reads past the end of its string parameters. */
-#include <sys/types.h>
-
-#ifdef HAVE_FCNTL_H
-#include <fcntl.h>
-#endif
-
-#ifdef HAVE_SYS_MMAN_H
-#include <sys/mman.h>
-#endif
-
-#ifndef MAP_ANON
-#ifdef MAP_ANONYMOUS
-#define MAP_ANON MAP_ANONYMOUS
-#else
-#define MAP_ANON MAP_FILE
-#endif
-#endif
-
-#ifndef MAP_FILE
-#define MAP_FILE 0
-#endif
-#ifndef O_RDONLY
-#define O_RDONLY 0
-#endif
-
-#define MAP_LEN 0x10000
-
-main ()
-{
-#if defined(HAVE_MMAP) || defined(HAVE_MMAP_ANYWHERE)
- char *p;
- int dev_zero;
-
- dev_zero = open ("/dev/zero", O_RDONLY);
- if (dev_zero < 0)
- exit (1);
-
- p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
- MAP_ANON|MAP_PRIVATE, dev_zero, 0);
- if (p == (char *)-1)
- p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
- MAP_ANON|MAP_PRIVATE, -1, 0);
- if (p == (char *)-1)
- exit (2);
- else
- {
- char *string = "__si_type_info";
- char *q = (char *) p + MAP_LEN - strlen (string) - 2;
- char *r = (char *) p + 0xe;
-
- strcpy (q, string);
- strcpy (r, string);
- strncmp (r, q, 14);
- }
-#endif /* HAVE_MMAP || HAVE_MMAP_ANYWHERE */
- exit (0);
-}
-], ac_cv_func_strncmp_works=yes, ac_cv_func_strncmp_works=no,
- ac_cv_func_strncmp_works=yes)
-rm -f core core.* *.core])
-if test $ac_cv_func_strncmp_works = no ; then
- AC_LIBOBJ([strncmp])
-fi
-])
-
-dnl See if errno must be declared even when <errno.h> is included.
-AC_DEFUN(libiberty_AC_DECLARE_ERRNO,
-[AC_CACHE_CHECK(whether errno must be declared, libiberty_cv_declare_errno,
-[AC_TRY_COMPILE(
-[#include <errno.h>],
-[int x = errno;],
-libiberty_cv_declare_errno=no,
-libiberty_cv_declare_errno=yes)])
-if test $libiberty_cv_declare_errno = yes
-then AC_DEFINE(NEED_DECLARATION_ERRNO, 1,
- [Define if errno must be declared even when <errno.h> is included.])
-fi
-])
-
-dnl See whether we need a declaration for a function.
-AC_DEFUN(libiberty_NEED_DECLARATION,
-[AC_MSG_CHECKING([whether $1 must be declared])
-AC_CACHE_VAL(libiberty_cv_decl_needed_$1,
-[AC_TRY_COMPILE([
-#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif],
-[char *(*pfn) = (char *(*)) $1],
-libiberty_cv_decl_needed_$1=no, libiberty_cv_decl_needed_$1=yes)])
-AC_MSG_RESULT($libiberty_cv_decl_needed_$1)
-if test $libiberty_cv_decl_needed_$1 = yes; then
- AC_DEFINE([NEED_DECLARATION_]translit($1, [a-z], [A-Z]), 1,
- [Define if $1 is not declared in system header files.])
-fi
-])dnl
-
-# We always want a C version of alloca() compiled into libiberty,
-# because native-compiler support for the real alloca is so !@#$%
-# unreliable that GCC has decided to use it only when being compiled
-# by GCC. This is the part of AC_FUNC_ALLOCA that calculates the
-# information alloca.c needs.
-AC_DEFUN(libiberty_AC_FUNC_C_ALLOCA,
-[AC_CACHE_CHECK(whether alloca needs Cray hooks, ac_cv_os_cray,
-[AC_EGREP_CPP(webecray,
-[#if defined(CRAY) && ! defined(CRAY2)
-webecray
-#else
-wenotbecray
-#endif
-], ac_cv_os_cray=yes, ac_cv_os_cray=no)])
-if test $ac_cv_os_cray = yes; then
- for ac_func in _getb67 GETB67 getb67; do
- AC_CHECK_FUNC($ac_func,
- [AC_DEFINE_UNQUOTED(CRAY_STACKSEG_END, $ac_func,
- [Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP
- systems. This function is required for alloca.c support on those
- systems.]) break])
- done
-fi
-
-AC_CACHE_CHECK(stack direction for C alloca, ac_cv_c_stack_direction,
-[AC_TRY_RUN([find_stack_direction ()
-{
- static char *addr = 0;
- auto char dummy;
- if (addr == 0)
- {
- addr = &dummy;
- return find_stack_direction ();
- }
- else
- return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
- exit (find_stack_direction() < 0);
-}],
- ac_cv_c_stack_direction=1,
- ac_cv_c_stack_direction=-1,
- ac_cv_c_stack_direction=0)])
-AC_DEFINE_UNQUOTED(STACK_DIRECTION, $ac_cv_c_stack_direction,
- [Define if you know the direction of stack growth for your system;
- otherwise it will be automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown])
-])
+# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
+# Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_include([../config/acx.m4])
+m4_include([../config/no-executables.m4])
+m4_include([../config/override.m4])
+m4_include([../config/picflag.m4])
+m4_include([../config/warnings.m4])
;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
;;
- i[34567]86-*-interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
i[34567]86-*-nto-qnx*)
# QNX uses GNU C++, but need to define -shared option too, otherwise
# it will coredump.
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether errno must be declared" >&5
-$as_echo_n "checking whether errno must be declared... " >&6; }
-if test "${libiberty_cv_declare_errno+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <errno.h>
-int
-main ()
-{
-int x = errno;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- libiberty_cv_declare_errno=no
-else
- libiberty_cv_declare_errno=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libiberty_cv_declare_errno" >&5
-$as_echo "$libiberty_cv_declare_errno" >&6; }
-if test $libiberty_cv_declare_errno = yes
-then
-$as_echo "#define NEED_DECLARATION_ERRNO 1" >>confdefs.h
-
-fi
-
+libiberty_AC_DECLARE_ERRNO
# Determine sizes of some types.
# The cast to long int works around a bug in the HP C Compiler
done
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether alloca needs Cray hooks" >&5
-$as_echo_n "checking whether alloca needs Cray hooks... " >&6; }
-if test "${ac_cv_os_cray+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#if defined(CRAY) && ! defined(CRAY2)
-webecray
-#else
-wenotbecray
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "webecray" >/dev/null 2>&1; then :
- ac_cv_os_cray=yes
-else
- ac_cv_os_cray=no
-fi
-rm -f conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
-$as_echo "$ac_cv_os_cray" >&6; }
-if test $ac_cv_os_cray = yes; then
- for ac_func in _getb67 GETB67 getb67; do
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
-
-cat >>confdefs.h <<_ACEOF
-#define CRAY_STACKSEG_END $ac_func
-_ACEOF
- break
-fi
-
- done
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
-$as_echo_n "checking stack direction for C alloca... " >&6; }
-if test "${ac_cv_c_stack_direction+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- ac_cv_c_stack_direction=0
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-find_stack_direction ()
-{
- static char *addr = 0;
- auto char dummy;
- if (addr == 0)
- {
- addr = &dummy;
- return find_stack_direction ();
- }
- else
- return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
- exit (find_stack_direction() < 0);
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_c_stack_direction=1
-else
- ac_cv_c_stack_direction=-1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
-$as_echo "$ac_cv_c_stack_direction" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-_ACEOF
-
-
+ libiberty_AC_FUNC_C_ALLOCA
for ac_header in vfork.h
do :
ac_fn_c_check_header_preproc "$LINENO" "vfork.h" "ac_cv_header_vfork_h"
#define HAVE_DECL_STRVERSCMP $ac_have_decl
_ACEOF
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether canonicalize_file_name must be declared" >&5
-$as_echo_n "checking whether canonicalize_file_name must be declared... " >&6; }
-if test "${libiberty_cv_decl_needed_canonicalize_file_name+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include "confdefs.h"
-#include <stdio.h>
-#ifdef HAVE_STRING_H
-#include <string.h>
-#else
-#ifdef HAVE_STRINGS_H
-#include <strings.h>
-#endif
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-int
-main ()
-{
-char *(*pfn) = (char *(*)) canonicalize_file_name
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- libiberty_cv_decl_needed_canonicalize_file_name=no
-else
- libiberty_cv_decl_needed_canonicalize_file_name=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libiberty_cv_decl_needed_canonicalize_file_name" >&5
-$as_echo "$libiberty_cv_decl_needed_canonicalize_file_name" >&6; }
-if test $libiberty_cv_decl_needed_canonicalize_file_name = yes; then
-
-$as_echo "#define NEED_DECLARATION_CANONICALIZE_FILE_NAME 1" >>confdefs.h
-
-fi
-
+ libiberty_NEED_DECLARATION(canonicalize_file_name)
fi
# Figure out which version of pexecute to use.
esac
-if test x$gcc_no_link = xyes; then
- if test "x${ac_cv_func_mmap_fixed_mapped+set}" != xset; then
- ac_cv_func_mmap_fixed_mapped=no
- fi
-fi
-if test "x${ac_cv_func_mmap_fixed_mapped}" != xno; then
- for ac_header in stdlib.h unistd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_preproc "$LINENO" "$ac_header" "$as_ac_Header"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-for ac_func in getpagesize
-do :
- ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize"
-if test "x$ac_cv_func_getpagesize" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_GETPAGESIZE 1
-_ACEOF
-
-fi
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5
-$as_echo_n "checking for working mmap... " >&6; }
-if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- ac_cv_func_mmap_fixed_mapped=no
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
-/* malloc might have been renamed as rpl_malloc. */
-#undef malloc
-
-/* Thanks to Mike Haertel and Jim Avera for this test.
- Here is a matrix of mmap possibilities:
- mmap private not fixed
- mmap private fixed at somewhere currently unmapped
- mmap private fixed at somewhere already mapped
- mmap shared not fixed
- mmap shared fixed at somewhere currently unmapped
- mmap shared fixed at somewhere already mapped
- For private mappings, we should verify that changes cannot be read()
- back from the file, nor mmap's back from the file at a different
- address. (There have been systems where private was not correctly
- implemented like the infamous i386 svr4.0, and systems where the
- VM page cache was not coherent with the file system buffer cache
- like early versions of FreeBSD and possibly contemporary NetBSD.)
- For shared mappings, we should conversely verify that changes get
- propagated back to all the places they're supposed to be.
-
- Grep wants private fixed already mapped.
- The main things grep needs to know about mmap are:
- * does it exist and is it safe to write into the mmap'd area
- * how to use it (BSD variants) */
-
-#include <fcntl.h>
-#include <sys/mman.h>
-
-#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H
-char *malloc ();
-#endif
-
-/* This mess was copied from the GNU getpagesize.h. */
-#ifndef HAVE_GETPAGESIZE
-/* Assume that all systems that can run configure have sys/param.h. */
-# ifndef HAVE_SYS_PARAM_H
-# define HAVE_SYS_PARAM_H 1
-# endif
-
-# ifdef _SC_PAGESIZE
-# define getpagesize() sysconf(_SC_PAGESIZE)
-# else /* no _SC_PAGESIZE */
-# ifdef HAVE_SYS_PARAM_H
-# include <sys/param.h>
-# ifdef EXEC_PAGESIZE
-# define getpagesize() EXEC_PAGESIZE
-# else /* no EXEC_PAGESIZE */
-# ifdef NBPG
-# define getpagesize() NBPG * CLSIZE
-# ifndef CLSIZE
-# define CLSIZE 1
-# endif /* no CLSIZE */
-# else /* no NBPG */
-# ifdef NBPC
-# define getpagesize() NBPC
-# else /* no NBPC */
-# ifdef PAGESIZE
-# define getpagesize() PAGESIZE
-# endif /* PAGESIZE */
-# endif /* no NBPC */
-# endif /* no NBPG */
-# endif /* no EXEC_PAGESIZE */
-# else /* no HAVE_SYS_PARAM_H */
-# define getpagesize() 8192 /* punt totally */
-# endif /* no HAVE_SYS_PARAM_H */
-# endif /* no _SC_PAGESIZE */
-
-#endif /* no HAVE_GETPAGESIZE */
-
-int
-main ()
-{
- char *data, *data2, *data3;
- int i, pagesize;
- int fd;
-
- pagesize = getpagesize ();
-
- /* First, make a file with some known garbage in it. */
- data = (char *) malloc (pagesize);
- if (!data)
- return 1;
- for (i = 0; i < pagesize; ++i)
- *(data + i) = rand ();
- umask (0);
- fd = creat ("conftest.mmap", 0600);
- if (fd < 0)
- return 1;
- if (write (fd, data, pagesize) != pagesize)
- return 1;
- close (fd);
-
- /* Next, try to mmap the file at a fixed address which already has
- something else allocated at it. If we can, also make sure that
- we see the same garbage. */
- fd = open ("conftest.mmap", O_RDWR);
- if (fd < 0)
- return 1;
- data2 = (char *) malloc (2 * pagesize);
- if (!data2)
- return 1;
- data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1);
- if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
- MAP_PRIVATE | MAP_FIXED, fd, 0L))
- return 1;
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data2 + i))
- return 1;
-
- /* Finally, make sure that changes to the mapped area do not
- percolate back to the file as seen by read(). (This is a bug on
- some variants of i386 svr4.0.) */
- for (i = 0; i < pagesize; ++i)
- *(data2 + i) = *(data2 + i) + 1;
- data3 = (char *) malloc (pagesize);
- if (!data3)
- return 1;
- if (read (fd, data3, pagesize) != pagesize)
- return 1;
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data3 + i))
- return 1;
- close (fd);
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_func_mmap_fixed_mapped=yes
-else
- ac_cv_func_mmap_fixed_mapped=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5
-$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; }
-if test $ac_cv_func_mmap_fixed_mapped = yes; then
-
-$as_echo "#define HAVE_MMAP 1" >>confdefs.h
-
-fi
-rm -f conftest.mmap
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strncmp" >&5
-$as_echo_n "checking for working strncmp... " >&6; }
-if test "${ac_cv_func_strncmp_works+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- ac_cv_func_strncmp_works=yes
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Test by Jim Wilson and Kaveh Ghazi.
- Check whether strncmp reads past the end of its string parameters. */
-#include <sys/types.h>
-
-#ifdef HAVE_FCNTL_H
-#include <fcntl.h>
-#endif
-
-#ifdef HAVE_SYS_MMAN_H
-#include <sys/mman.h>
-#endif
-
-#ifndef MAP_ANON
-#ifdef MAP_ANONYMOUS
-#define MAP_ANON MAP_ANONYMOUS
-#else
-#define MAP_ANON MAP_FILE
-#endif
-#endif
-
-#ifndef MAP_FILE
-#define MAP_FILE 0
-#endif
-#ifndef O_RDONLY
-#define O_RDONLY 0
-#endif
-
-#define MAP_LEN 0x10000
-
-main ()
-{
-#if defined(HAVE_MMAP) || defined(HAVE_MMAP_ANYWHERE)
- char *p;
- int dev_zero;
-
- dev_zero = open ("/dev/zero", O_RDONLY);
- if (dev_zero < 0)
- exit (1);
-
- p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
- MAP_ANON|MAP_PRIVATE, dev_zero, 0);
- if (p == (char *)-1)
- p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
- MAP_ANON|MAP_PRIVATE, -1, 0);
- if (p == (char *)-1)
- exit (2);
- else
- {
- char *string = "__si_type_info";
- char *q = (char *) p + MAP_LEN - strlen (string) - 2;
- char *r = (char *) p + 0xe;
-
- strcpy (q, string);
- strcpy (r, string);
- strncmp (r, q, 14);
- }
-#endif /* HAVE_MMAP || HAVE_MMAP_ANYWHERE */
- exit (0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_func_strncmp_works=yes
-else
- ac_cv_func_strncmp_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-rm -f core core.* *.core
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strncmp_works" >&5
-$as_echo "$ac_cv_func_strncmp_works" >&6; }
-if test $ac_cv_func_strncmp_works = no ; then
- case " $LIBOBJS " in
- *" strncmp.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS strncmp.$ac_objext"
- ;;
-esac
-
-fi
-
+libiberty_AC_FUNC_STRNCMP
# Install a library built with a cross compiler in $(tooldir) rather
# than $(libdir).
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-04-19 H.J. Lu <hongjiu.lu@intel.com>
PR libitm/70456
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-06-10 Ilya Enkovich <ilya.enkovich@intel.com>
* mpxwrap/mpx_wrappers.c (move_bounds): Fix overflow bug.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
# The HP-UX ksh and POSIX shell print the target directory to stdout
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * aclocal.m4: Regenerate.
+ * configure: Likewise.
+
2016-01-04 Jakub Jelinek <jakub@redhat.com>
Update copyright years.
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+m4_include([../config/lthostflags.m4])
+m4_include([../config/multi.m4])
+m4_include([../config/override.m4])
m4_include([../ltoptions.m4])
m4_include([../ltsugar.m4])
m4_include([../ltversion.m4])
m4_include([../lt~obsolete.m4])
-m4_include([../config/lthostflags.m4])
-m4_include([../config/multi.m4])
-m4_include([../config/override.m4])
m4_include([acinclude.m4])
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
# The HP-UX ksh and POSIX shell print the target directory to stdout
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-07-21 Ilya Verbin <ilya.verbin@intel.com>
* Makefile.am (myo_inc_dir): Remove.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
# The HP-UX ksh and POSIX shell print the target directory to stdout
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-01-04 Jakub Jelinek <jakub@redhat.com>
* libquadmath.texi: Bump @copying's copyright year.
2015-08-09 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
- * Makefile.am (libquadmath_la_SOURCES): Add math/logbq.c.
+ * Makefile.am (libquadmath_la_SOURCES): Add matha/logbq.c.
* Makefile.in: Regenerate.
* libquadmath.texi: Document logbq.
* quadmath.h: Add logbq prototype.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-11-09 Maxim Ostapenko <m.ostapenko@samsung.com>
* asan/asan_globals.cc (RegisterGlobal): Do not call
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2015-04-25 Daniel Starke <daniel.f.starke@freenet.de>
PR target/65867
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-11-15 Jonathan Wakely <jwakely@redhat.com>
* testsuite/19_diagnostics/error_code/is_error_code_v.cc: Fix license
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
# The HP-UX ksh and POSIX shell print the target directory to stdout
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-05-02 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* Makefile.am (toolexeclib_LTLIBRARIES): Only set if
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2016-02-25 Ilya Verbin <ilya.verbin@intel.com>
PR driver/68463
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
+2016-11-15 Matthias Klose <doko@ubuntu.com>
+
+ * configure: Regenerate.
+
2015-11-23 Matthias Klose <doko@ubuntu.com>
* Imported zlib 1.2.8; merged local changes.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
CC="$CC"
CXX="$CXX"
GFORTRAN="$GFORTRAN"
-GCJ="$GCJ"
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
projects / gcc.git / commitdiff