Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-18 Tom de Vries <tdevries@suse.de>
* aarch64-tdep.c: Fix typos in comments.
* ada-lang.c: Same.
* ada-tasks.c: Same.
* alpha-tdep.c: Same.
* alpha-tdep.h: Same.
* amd64-nat.c: Same.
* amd64-windows-tdep.c: Same.
* arc-tdep.c: Same.
* arc-tdep.h: Same.
* arch-utils.c: Same.
* arm-nbsd-tdep.c: Same.
* arm-tdep.c: Same.
* ax-gdb.c: Same.
* blockframe.c: Same.
* btrace.c: Same.
* c-varobj.c: Same.
* coff-pe-read.c: Same.
* coffread.c: Same.
* cris-tdep.c: Same.
* darwin-nat.c: Same.
* dbxread.c: Same.
* dcache.c: Same.
* disasm.c: Same.
* dtrace-probe.c: Same.
* dwarf-index-write.c: Same.
* dwarf2-frame-tailcall.c: Same.
* dwarf2-frame.c: Same.
* dwarf2read.c: Same.
* eval.c: Same.
* exceptions.c: Same.
* fbsd-tdep.c: Same.
* findvar.c: Same.
* frame.c: Same.
* frv-tdep.c: Same.
* gnu-v3-abi.c: Same.
* go32-nat.c: Same.
* h8300-tdep.c: Same.
* hppa-tdep.c: Same.
* i386-linux-tdep.c: Same.
* i386-tdep.c: Same.
* ia64-libunwind-tdep.c: Same.
* ia64-tdep.c: Same.
* infcmd.c: Same.
* infrun.c: Same.
* linespec.c: Same.
* linux-nat.c: Same.
* linux-thread-db.c: Same.
* machoread.c: Same.
* mdebugread.c: Same.
* mep-tdep.c: Same.
* mn10300-tdep.c: Same.
* namespace.c: Same.
* objfiles.c: Same.
* opencl-lang.c: Same.
* or1k-tdep.c: Same.
* osabi.c: Same.
* ppc-linux-nat.c: Same.
* ppc-linux-tdep.c: Same.
* ppc-sysv-tdep.c: Same.
* printcmd.c: Same.
* procfs.c: Same.
* record-btrace.c: Same.
* record-full.c: Same.
* remote-fileio.c: Same.
* remote.c: Same.
* rs6000-tdep.c: Same.
* s12z-tdep.c: Same.
* score-tdep.c: Same.
* ser-base.c: Same.
* ser-go32.c: Same.
* skip.c: Same.
* sol-thread.c: Same.
* solib-svr4.c: Same.
* solib.c: Same.
* source.c: Same.
* sparc-nat.c: Same.
* sparc-sol2-tdep.c: Same.
* sparc-tdep.c: Same.
* sparc64-tdep.c: Same.
* stabsread.c: Same.
* stack.c: Same.
* symfile.c: Same.
* symtab.c: Same.
* target-descriptions.c: Same.
* target-float.c: Same.
* thread.c: Same.
* utils.c: Same.
* valops.c: Same.
* valprint.c: Same.
* value.c: Same.
* varobj.c: Same.
* windows-nat.c: Same.
* xcoffread.c: Same.
* xstormy16-tdep.c: Same.
* xtensa-tdep.c: Same.
Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4
+2019-10-18 Tom de Vries <tdevries@suse.de>
+
+ * aarch64-tdep.c: Fix typos in comments.
+ * ada-lang.c: Same.
+ * ada-tasks.c: Same.
+ * alpha-tdep.c: Same.
+ * alpha-tdep.h: Same.
+ * amd64-nat.c: Same.
+ * amd64-windows-tdep.c: Same.
+ * arc-tdep.c: Same.
+ * arc-tdep.h: Same.
+ * arch-utils.c: Same.
+ * arm-nbsd-tdep.c: Same.
+ * arm-tdep.c: Same.
+ * ax-gdb.c: Same.
+ * blockframe.c: Same.
+ * btrace.c: Same.
+ * c-varobj.c: Same.
+ * coff-pe-read.c: Same.
+ * coffread.c: Same.
+ * cris-tdep.c: Same.
+ * darwin-nat.c: Same.
+ * dbxread.c: Same.
+ * dcache.c: Same.
+ * disasm.c: Same.
+ * dtrace-probe.c: Same.
+ * dwarf-index-write.c: Same.
+ * dwarf2-frame-tailcall.c: Same.
+ * dwarf2-frame.c: Same.
+ * dwarf2read.c: Same.
+ * eval.c: Same.
+ * exceptions.c: Same.
+ * fbsd-tdep.c: Same.
+ * findvar.c: Same.
+ * frame.c: Same.
+ * frv-tdep.c: Same.
+ * gnu-v3-abi.c: Same.
+ * go32-nat.c: Same.
+ * h8300-tdep.c: Same.
+ * hppa-tdep.c: Same.
+ * i386-linux-tdep.c: Same.
+ * i386-tdep.c: Same.
+ * ia64-libunwind-tdep.c: Same.
+ * ia64-tdep.c: Same.
+ * infcmd.c: Same.
+ * infrun.c: Same.
+ * linespec.c: Same.
+ * linux-nat.c: Same.
+ * linux-thread-db.c: Same.
+ * machoread.c: Same.
+ * mdebugread.c: Same.
+ * mep-tdep.c: Same.
+ * mn10300-tdep.c: Same.
+ * namespace.c: Same.
+ * objfiles.c: Same.
+ * opencl-lang.c: Same.
+ * or1k-tdep.c: Same.
+ * osabi.c: Same.
+ * ppc-linux-nat.c: Same.
+ * ppc-linux-tdep.c: Same.
+ * ppc-sysv-tdep.c: Same.
+ * printcmd.c: Same.
+ * procfs.c: Same.
+ * record-btrace.c: Same.
+ * record-full.c: Same.
+ * remote-fileio.c: Same.
+ * remote.c: Same.
+ * rs6000-tdep.c: Same.
+ * s12z-tdep.c: Same.
+ * score-tdep.c: Same.
+ * ser-base.c: Same.
+ * ser-go32.c: Same.
+ * skip.c: Same.
+ * sol-thread.c: Same.
+ * solib-svr4.c: Same.
+ * solib.c: Same.
+ * source.c: Same.
+ * sparc-nat.c: Same.
+ * sparc-sol2-tdep.c: Same.
+ * sparc-tdep.c: Same.
+ * sparc64-tdep.c: Same.
+ * stabsread.c: Same.
+ * stack.c: Same.
+ * symfile.c: Same.
+ * symtab.c: Same.
+ * target-descriptions.c: Same.
+ * target-float.c: Same.
+ * thread.c: Same.
+ * utils.c: Same.
+ * valops.c: Same.
+ * valprint.c: Same.
+ * value.c: Same.
+ * varobj.c: Same.
+ * windows-nat.c: Same.
+ * xcoffread.c: Same.
+ * xstormy16-tdep.c: Same.
+ * xtensa-tdep.c: Same.
+
2019-10-17 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
}
else if (insn_bits21_23 == 0x04 || insn_bits21_23 == 0x06)
{
- /* CConditional select. */
+ /* Conditional select. */
/* Data-processing (2 source). */
/* Data-processing (1 source). */
record_buf[0] = reg_rd;
/* Return a decoded version of the given VALUE. This means returning
a value whose type is obtained by applying all the GNAT-specific
- encondings, making the resulting type a static but standard description
+ encodings, making the resulting type a static but standard description
of the initial type. */
struct value *
Otherwise, do nothing. This function also does nothing if
INDEX_DESC_TYPE is NULL.
- The GNAT encoding used to describle the array index type evolved a bit.
+ The GNAT encoding used to describe the array index type evolved a bit.
Initially, the information would be provided through the name of each
field of the structure type only, while the type of these fields was
described as unspecified and irrelevant. The debugger was then expected
brobecker/2010-11-19: It seems to me that the only case where it is
useful to preserve the typedef layer is when dealing with fat pointers.
Perhaps, we could add a check for that and preserve the typedef layer
- only in that situation. But this seems unecessary so far, probably
+ only in that situation. But this seems unnecessary so far, probably
because we call check_typedef/ada_check_typedef pretty much everywhere.
*/
if (TYPE_CODE (type) == TYPE_CODE_TYPEDEF
if (TYPE_CODE (TYPE_FIELD_TYPE (real_type_namer, 0)) != TYPE_CODE_REF)
{
/* This is an older encoding form where the base type needs to be
- looked up by name. We prefer the newer enconding because it is
+ looked up by name. We prefer the newer encoding because it is
more efficient. */
raw_real_type = ada_find_any_type (TYPE_FIELD_NAME (real_type_namer, 0));
if (raw_real_type == NULL)
if (access (fullname, R_OK) != 0)
return 1;
- /* Check the unit filename againt the Ada runtime file naming.
+ /* Check the unit filename against the Ada runtime file naming.
We also check the name of the objfile against the name of some
known system libraries that sometimes come with debugging info
too. */
exception constraint_error" is rewritten into "catch exception
standard.constraint_error".
- If an exception named contraint_error is defined in another package of
+ If an exception named constraint_error is defined in another package of
the inferior program, then the only way to specify this exception as a
breakpoint condition is to use its fully-qualified named:
e.g. my_package.constraint_error. */
}
/* Read the ATCB data of a given task given its TASK_ID (which is in practice
- the address of its assocated ATCB record), and store the result inside
+ the address of its associated ATCB record), and store the result inside
TASK_INFO. */
static void
called_task_fieldno));
}
- /* If the ATCB cotnains some information about RV callers, then
+ /* If the ATCB contains some information about RV callers, then
compute the "caller_task". Otherwise, leave it as zero. */
if (pspace_data->atcb_fieldno.call >= 0)
const char *name;
/* NOTE: cagney/2004-04-30: Do not copy/clone this code. Instead
- look at tramp-frame.h and other simplier per-architecture
+ look at tramp-frame.h and other simpler per-architecture
sigtramp unwinders. */
/* We shouldn't even bother to try if the OSABI didn't register a
- sigcontext_addr handler or pc_in_sigtramp hander. */
+ sigcontext_addr handler or pc_in_sigtramp handler. */
if (gdbarch_tdep (gdbarch)->sigcontext_addr == NULL)
return 0;
if (gdbarch_tdep (gdbarch)->pc_in_sigtramp == NULL)
/* Does the PC fall in a signal trampoline. */
/* NOTE: cagney/2004-04-30: Do not copy/clone this code. Instead
- look at tramp-frame.h and other simplier per-architecture
+ look at tramp-frame.h and other simpler per-architecture
sigtramp unwinders. */
int (*pc_in_sigtramp) (struct gdbarch *gdbarch, CORE_ADDR pc,
const char *name);
the register number as used by GDB and the register set used by the
host to represent the general-purpose registers; one for 32-bit
code and one for 64-bit code. The mappings are specified by the
- follwing variables and consist of an array of offsets within the
+ following variables and consist of an array of offsets within the
register set indexed by register number, and the number of
registers supported by the mapping. We don't need mappings for the
floating-point and SSE registers, since the difference between
{
/* The dwarf2 unwinder (appended very early by i386_gdbarch_init) is
preferred over the SEH one. The reasons are:
- - binaries without SEH but with dwarf2 debug info are correcly handled
+ - binaries without SEH but with dwarf2 debug info are correctly handled
(although they aren't ABI compliant, gcc before 4.7 didn't emit SEH
info).
- dwarf3 DW_OP_call_frame_cfa is correctly handled (it can only be
-/* Target dependent code for ARC arhitecture, for GDB.
+/* Target dependent code for ARC architecture, for GDB.
Copyright 2005-2019 Free Software Foundation, Inc.
Contributed by Synopsys Inc.
If CACHE is not NULL, then it will be filled with information about saved
registers.
- There are several variations of prologue which GDB may encouter. "Full"
+ There are several variations of prologue which GDB may encounter. "Full"
prologue looks like this:
sub sp,sp,<imm> ; Space for variadic arguments.
store, that doesn't update SP. Like this:
- sub sp,sp,8 ; Create space for calee-saved registers.
+ sub sp,sp,8 ; Create space for callee-saved registers.
st r13,[sp,4] ; Store callee saved registers (up to R26/GP).
st r14,[sp,0]
int
arc_delayed_print_insn (bfd_vma addr, struct disassemble_info *info)
{
- /* Standard BFD "machine number" field allows libocodes disassembler to
+ /* Standard BFD "machine number" field allows libopcodes disassembler to
distinguish ARC 600, 700 and v2 cores, however v2 encompasses both ARC EM
and HS, which have some difference between. There are two ways to specify
what is the target core:
-/* Target dependent code for ARC arhitecture, for GDB.
+/* Target dependent code for ARC architecture, for GDB.
Copyright 2005-2019 Free Software Foundation, Inc.
Contributed by Synopsys Inc.
gdb_assert (regnum >= 0 && regnum < gdbarch_num_regs (gdbarch));
/* NOTE: cagney/2002-05-13: The old code did it this way and it is
suspected that some GDB/SIM combinations may rely on this
- behavour. The default should be one2one_register_sim_regno
+ behaviour. The default should be one2one_register_sim_regno
(below). */
if (gdbarch_register_name (gdbarch, regnum) != NULL
&& gdbarch_register_name (gdbarch, regnum)[0] != '\0')
SELECTED may be NULL, in which case we return the architecture
associated with TARGET_DESC. If SELECTED specifies a variant
- of the architecture associtated with TARGET_DESC, return the
+ of the architecture associated with TARGET_DESC, return the
more specific of the two.
If SELECTED is a different architecture, but it is accepted as
#define ARM_NBSD_JB_PC 24
#define ARM_NBSD_JB_ELEMENT_SIZE ARM_INT_REGISTER_SIZE
-/* For compatibility with previous implemenations of GDB on arm/NetBSD,
+/* For compatibility with previous implementations of GDB on arm/NetBSD,
override the default little-endian breakpoint. */
static const gdb_byte arm_nbsd_arm_le_breakpoint[] = {0x11, 0x00, 0x00, 0xe6};
static const gdb_byte arm_nbsd_arm_be_breakpoint[] = {0xe6, 0x00, 0x00, 0x11};
}
}
- /* Push stack padding for dowubleword alignment. */
+ /* Push stack padding for doubleword alignment. */
if (nstack & (align - 1))
{
si = push_stack_item (si, val, ARM_INT_REGISTER_SIZE);
if (dsc->u.branch.link)
{
/* The value of LR should be the next insn of current one. In order
- not to confuse logic hanlding later insn `bx lr', if current insn mode
+ not to confuse logic handling later insn `bx lr', if current insn mode
is Thumb, the bit 0 of LR value should be set to 1. */
ULONGEST next_insn_addr = dsc->insn_addr + dsc->insn_size;
Before this sequence of instructions:
r0 is the PC value got from displaced_read_reg, so r0 = from + 8;
- r2 is the Rn value got from dispalced_read_reg.
+ r2 is the Rn value got from displaced_read_reg.
Insn1: push {pc} Write address of STR instruction + offset on stack
Insn2: pop {r4} Read it back from stack, r4 = addr(Insn1) + offset
}
-/* Common copy routine for svc instruciton. */
+/* Common copy routine for svc instruction. */
static int
install_svc (struct gdbarch *gdbarch, struct regcache *regs,
}
/* Add standard register aliases. We add aliases even for those
- nanes which are used by the current architecture - it's simpler,
+ names which are used by the current architecture - it's simpler,
and does no harm, since nothing ever lists user registers. */
for (i = 0; i < ARRAY_SIZE (arm_register_aliases); i++)
user_reg_add (gdbarch, arm_register_aliases[i].name,
{
reg_dest = bits (arm_insn_r->arm_insn, 12, 15);
/* LDR insn has a capability to do branching, if
- MOV LR, PC is precedded by LDR insn having Rn as R15
+ MOV LR, PC is preceded by LDR insn having Rn as R15
in that case, it emulates branch and link insn, and hence we
need to save CSPR and PC as well. */
if (15 != reg_dest)
} // namespace
/* Extracts arm/thumb/thumb2 insn depending on the size, and returns 0 on success
-and positive val on fauilure. */
+and positive val on failure. */
static int
extract_arm_insn (abstract_memory_reader& reader,
gen_expr (exp, pc, ax, &value3);
gen_usual_unary (ax, &value3);
ax_label (ax, end, ax->len);
- /* This is arbitary - what if B and C are incompatible types? */
+ /* This is arbitrary - what if B and C are incompatible types? */
value->type = value2.type;
value->kind = value2.kind;
break;
struct compunit_symtab *compunit_symtab = NULL;
CORE_ADDR mapped_pc;
- /* To ensure that the symbol returned belongs to the correct setion
+ /* To ensure that the symbol returned belongs to the correct section
(and that the last [random] symbol from the previous section
isn't returned) try to find the section containing PC. First try
the overlay code (which by default returns NULL); and second try
best_r = NULL;
/* We search the back traces of LHS and RHS for valid connections and connect
- the two functon segments that give the longest combined back trace. */
+ the two function segments that give the longest combined back trace. */
for (cand_l = lhs; cand_l != NULL;
cand_l = ftrace_get_caller (btinfo, cand_l))
#define ANONYMOUS_UNION_NAME _("<anonymous union>")
/* Does CHILD represent a child with no name? This happens when
- the child is an anonmous struct or union and it has no field name
+ the child is an anonymous struct or union and it has no field name
in its parent variable.
This has already been determined by *_describe_child. The easiest
/* Pointer to the function address vector. */
- /* This is relatived to ordinal value. */
+ /* This is relative to ordinal value. */
unsigned long func_rva = pe_as32 (erva + exp_funcbase +
ordinal * 4);
is_import_fixup_symbol (struct coff_symbol *cs,
enum minimal_symbol_type type)
{
- /* The following is a bit of a heuristic using the characterictics
+ /* The following is a bit of a heuristic using the characteristics
of these fixup symbols, but should work well in practice... */
int i;
inst_env->disable_interrupt = 0;
}
-/* Handles the intructions that's not yet implemented, by setting
+/* Handles the instructions that's not yet implemented, by setting
inst_env->invalid to true. */
static void
copy it to RDADDR in gdb's address space.
If WRADDR is not NULL, write gdb's LEN bytes from WRADDR and copy it
to ADDR in inferior task's address space.
- Return 0 on failure; number of bytes read / writen otherwise. */
+ Return 0 on failure; number of bytes read / written otherwise. */
static int
darwin_read_write_inferior (task_t task, CORE_ADDR addr,
else if (type & N_EXT || type == (unsigned char) N_TEXT
|| type == (unsigned char) N_NBTEXT)
{
- /* Global symbol: see if we came across a dbx defintion for
+ /* Global symbol: see if we came across a dbx definition for
a corresponding symbol. If so, store the value. Remove
syms from the chain when their values are stored, but
search the whole chain, as there may be several syms from
function-relative symbols. */
valu += function_start_offset;
- /* GCC 2.95.3 emits the first N_SLINE stab somwehere in the
+ /* GCC 2.95.3 emits the first N_SLINE stab somewhere in the
middle of the prologue instead of right at the start of the
function. To deal with this we record the address for the
first N_SLINE stab to be the start of the function instead of
is set, etc., then the chunk is skipped. Those chunks are handled
in target_xfer_memory() (or target_xfer_memory_partial()).
- This doesn't occur very often. The most common occurance is when
+ This doesn't occur very often. The most common occurrence is when
the last bit of the .text segment and the first bit of the .data
segment fall within the same dcache page with a ro/cacheable memory
region defined for the .text segment and a rw/non-cacheable memory
m_di.memory_error_func = dis_asm_memory_error;
m_di.print_address_func = dis_asm_print_address;
/* NOTE: cagney/2003-04-28: The original code, from the old Insight
- disassembler had a local optomization here. By default it would
+ disassembler had a local optimization here. By default it would
access the executable file, instead of the target memory (there
was a growing list of exceptions though). Unfortunately, the
heuristic was flawed. Commands like "disassemble &variable"
didn't work as they relied on the access going to the target.
- Further, it has been supperseeded by trust-read-only-sections
+ Further, it has been superseeded by trust-read-only-sections
(although that should be superseeded by target_trust..._p()). */
m_di.read_memory_func = read_memory_func;
m_di.arch = gdbarch_bfd_arch_info (gdbarch)->arch;
struct dtrace_probe_arg *get_arg_by_number (unsigned n,
struct gdbarch *gdbarch);
- /* Build the GDB internal expressiosn that, once evaluated, will
+ /* Build the GDB internal expression that, once evaluated, will
calculate the values of the arguments of the probe. */
void build_arg_exprs (struct gdbarch *gdbarch);
GDB_INDEX_SYMBOL_KIND_SET_VALUE((cu_index), (value)); \
} while (0)
-/* Ensure we don't use more than the alloted nuber of bits for the CU. */
+/* Ensure we don't use more than the allotted number of bits for the CU. */
#define DW2_GDB_INDEX_CU_SET_VALUE(cu_index, value) \
do { \
gdb_assert (((value) & ~GDB_INDEX_CU_MASK) == 0); \
(which would allow us to avoid the duplication by only having to check
the last entry pushed), but a symbol could have multiple kinds in one CU.
To keep things simple we don't worry about the duplication here and
- sort and uniqufy the list after we've processed all symbols. */
+ sort and uniquify the list after we've processed all symbols. */
slot.cu_indices.push_back (cu_index_and_attrs);
}
tailcall_cache. */
int refc;
- /* Associated found virtual taill call frames chain, it is never NULL. */
+ /* Associated found virtual tail call frames chain, it is never NULL. */
struct call_site_chain *chain;
/* Cached pretended_chain_levels result. */
}
/* Find the FDE for *PC. Return a pointer to the FDE, and store the
- inital location associated with it into *PC. */
+ initial location associated with it into *PC. */
static struct dwarf2_fde *
dwarf2_frame_find_fde (CORE_ADDR *pc, CORE_ADDR *out_offset)
/* Number of fields (including baseclasses). */
int nfields = 0;
- /* Set if the accesibility of one of the fields is not public. */
+ /* Set if the accessibility of one of the fields is not public. */
int non_public_fields = 0;
/* Member function fieldlist array, contains name of possibly overloaded
/* Create appropriate locally-scoped variables for all the
DW_TAG_common_block entries. Also create a struct common_block
listing all such variables for `info common'. COMMON_BLOCK_DOMAIN
- is used to sepate the common blocks name namespace from regular
+ is used to separate the common blocks name namespace from regular
variable names. */
static void
return 1;
/* The DWARF standard implies that the DW_AT_prototyped attribute
- is only meaninful for C, but the concept also extends to other
+ is only meaningful for C, but the concept also extends to other
languages that allow unprototyped functions (Eg: Objective C).
For all other languages, assume that functions are always
prototyped. */
TYPE_NAME (type) = dwarf2_name (die, cu);
/* In Ada, an unspecified type is typically used when the description
- of the type is defered to a different unit. When encountering
+ of the type is deferred to a different unit. When encountering
such a type, we treat it as a stub, and try to resolve it later on,
when needed. */
if (cu->language == language_ada)
}
/* Return the dwo name or NULL if not present. If present, it is in either
- DW_AT_GNU_dwo_name or DW_AT_dwo_name atrribute. */
+ DW_AT_GNU_dwo_name or DW_AT_dwo_name attribute. */
static const char *
dwarf2_dwo_name (struct die_info *die, struct dwarf2_cu *cu)
{
table if necessary. For convenience, return TYPE.
The DIEs reading must have careful ordering to:
- * Not cause infite loops trying to read in DIEs as a prerequisite for
+ * Not cause infinite loops trying to read in DIEs as a prerequisite for
reading current DIE.
* Not trying to dereference contents of still incompletely read in types
while reading in other DIEs.
{
default:
/* Perform integral promotion for ANSI C/C++.
- If not appropropriate for any particular language
+ If not appropriate for any particular language
it needs to modify this function. */
{
struct type *builtin_int = builtin_type (gdbarch)->builtin_int;
/* Deal with the special case if NOSIDE is EVAL_NORMAL and the resulting
type of the subscript is a variable length array type. In this case we
- must re-evaluate the right hand side of the subcription to allow
+ must re-evaluate the right hand side of the subscription to allow
side-effects. */
case BINOP_SUBSCRIPT:
if (noside == EVAL_NORMAL)
static void
print_exception (struct ui_file *file, const struct gdb_exception &e)
{
- /* KLUGE: cagney/2005-01-13: Write the string out one line at a time
+ /* KLUDGE: cagney/2005-01-13: Write the string out one line at a time
as that way the MI's behavior is preserved. */
const char *start;
const char *end;
all architectures.
Note that FreeBSD 7.0 used an older version of this structure
- (struct kinfo_ovmentry), but the NT_FREEBSD_PROCSTAT_VMMAP core
+ (struct kinfo_vmentry), but the NT_FREEBSD_PROCSTAT_VMMAP core
dump note wasn't introduced until FreeBSD 9.2. As a result, the
core dump note has always used the 7.1 and later structure
format. */
QUIT;
/* If we don't know how to compute FRAME's base address, don't give up:
- maybe the frame we are looking for is upper in the stace frame. */
+ maybe the frame we are looking for is upper in the stack frame. */
if (framefunc != NULL
&& SYMBOL_BLOCK_OPS (framefunc) != NULL
&& SYMBOL_BLOCK_OPS (framefunc)->get_frame_base != NULL
if special addresses are different, the frames are different. */
eq = 0;
else if (l.artificial_depth != r.artificial_depth)
- /* If artifical depths are different, the frames must be different. */
+ /* If artificial depths are different, the frames must be different. */
eq = 0;
else
/* Frames are equal. */
J - The register number of GRj in the instruction description.
K - The register number of GRk in the instruction description.
I - The register number of GRi.
- S - a signed imediate offset.
+ S - a signed immediate offset.
U - an unsigned immediate offset.
The dots below the numbers indicate where hex digit boundaries
/* If this architecture uses function descriptors directly in the vtable,
then the address of the vtable entry is actually a "function pointer"
(i.e. points to the descriptor). We don't need to scale the index
- by the size of a function descriptor; GCC does that before outputing
+ by the size of a function descriptor; GCC does that before outputting
debug information. */
if (gdbarch_vtable_function_descriptors (gdbarch))
vfn = value_addr (vfn);
cr3 = _farnspeekl (taskbase + 0x1c) & ~0xfff;
if (cr3 > 0xfffff)
{
-#if 0 /* Not fullly supported yet. */
+#if 0 /* Not fully supported yet. */
/* The Page Directory is in UMBs. In that case, CWSDPMI puts
the first Page Table right below the Page Directory. Thus,
the first Page Table's entry for its own address and the Page
Directory entry for that Page Table will hold the same
physical address. The loop below searches the entire UMB
- range of addresses for such an occurence. */
+ range of addresses for such an occurrence. */
unsigned long addr, pte_idx;
for (addr = 0xb0000, pte_idx = 0xb0;
frame_base_set_default (gdbarch, &h8300_frame_base);
/*
- * Miscelany
+ * Miscellany
*/
/* Stack grows up. */
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
/* For reasons unknown the HP PA64 tools generate multiple unwinder
sections in a single executable. So we just iterate over every
- section in the BFD looking for unwinder sections intead of trying
+ section in the BFD looking for unwinder sections instead of trying
to do a lookup with bfd_get_section_by_name.
First determine the total size of the unwind tables so that we
if (len > 16)
{
- /* All return values larget than 128 bits must be aggregate
+ /* All return values larger than 128 bits must be aggregate
return values. */
gdb_assert (!hppa64_integral_or_pointer_p (type));
gdb_assert (!hppa64_floating_p (type));
- stw: 0x1a, store a word from a general register.
- stwm: 0x1b, store a word from a general register and perform base
- register modification (2.0 will still treate it as stw).
+ register modification (2.0 will still treat it as stw).
- std: 0x1c, store a doubleword from a general register (2.0 only).
For unoptimized GCC code and for any HP CC code this will never ever
examine any user instructions.
- For optimzied GCC code we're faced with problems. GCC will schedule
+ For optimized GCC code we're faced with problems. GCC will schedule
its prologue and make prologue instructions available for delay slot
filling. The end result is user code gets mixed in with the prologue
and a prologue instruction may be in the delay slot of the first branch
final_iteration = 1;
}
- /* We've got a tenative location for the end of the prologue. However
+ /* We've got a tentative location for the end of the prologue. However
because of limitations in the unwind descriptor mechanism we may
have went too far into user code looking for the save of a register
that does not exist. So, if there registers we expected to be saved
return 1;
}
-/* This relaxed version of the insstruction matcher allows us to match
+/* This relaxed version of the instruction matcher allows us to match
from somewhere inside the pattern, by looking backwards in the
instruction scheme. */
tdep->i386_sysenter_record = i386_linux_intx80_sysenter_syscall_record;
tdep->i386_syscall_record = i386_linux_intx80_sysenter_syscall_record;
- /* N_FUN symbols in shared libaries have 0 for their values and need
+ /* N_FUN symbols in shared libraries have 0 for their values and need
to be relocated. */
set_gdbarch_sofun_address_maybe_missing (gdbarch, 1);
/* Check for `mov imm32, r32'. Note that there is an alternative
encoding for `mov m32, %eax'.
- ??? Should we handle SIB adressing here?
+ ??? Should we handle SIB addressing here?
??? Should we handle 16-bit operand-sizes here? */
/* `movl m32, %eax' */
The best we can do, in that case, is use the frame PC as the function
address. We don't need to give up since we still have the unwind
record to help us perform the unwinding. There is also another
- compelling to continue, because abandonning now means stopping
+ compelling to continue, because abandoning now means stopping
the backtrace, which can never be helpful for the user. */
cache->func_addr = get_frame_pc (this_frame);
if (val != 0)
return val;
- /* Breakpoints already present in the code will get deteacted and not get
+ /* Breakpoints already present in the code will get detected and not get
reinserted by bp_loc_is_permanent. Multiple breakpoints at the same
location cannot induce the internal error as they are optimized into
a single instance by update_global_location_list. */
if (arg == 0)
error_no_arg (_("environment variable and value"));
- /* Find seperation between variable name and value. */
+ /* Find separation between variable name and value. */
p = (char *) strchr (arg, '=');
val = (char *) strchr (arg, ' ');
}
}
-/* Implement `info proc' when given without any futher parameters. */
+/* Implement `info proc' when given without any further parameters. */
static void
info_proc_cmd (const char *args, int from_tty)
And, we DON'T want to call delete_breakpoints() here, since
that may write the bp's "shadow contents" (the instruction
- value that was overwritten witha TRAP instruction). Since
+ value that was overwritten with a TRAP instruction). Since
we now have a new a.out, those shadow contents aren't valid. */
mark_breakpoints_out ();
register contents, and memory. We use this in step n1.
- gdbarch_displaced_step_fixup adjusts registers and memory after
- we have successfuly single-stepped the instruction, to yield the
+ we have successfully single-stepped the instruction, to yield the
same effect the instruction would have had if we had executed it
at its original address. We use this in step n3.
return;
}
- /* Note: step_resume_breakpoint may be non-NULL. This occures
+ /* Note: step_resume_breakpoint may be non-NULL. This occurs
when either there's a nested signal, or when there's a
pending signal enabled just as the signal handler returns
(leaving the inferior at the step-resume-breakpoint without
\f
-/* First, some functions to initialize stuff at the beggining of the
+/* First, some functions to initialize stuff at the beginning of the
function. */
static void
- If the thread group leader exits while other threads in the
thread group still exist, waitpid(TGID, ...) hangs. That
waitpid won't return an exit status until the other threads
- in the group are reapped.
+ in the group are reaped.
- When a non-leader thread execs, that thread just vanishes
without reporting an exit (so we'd hang if we waited for it
static bool auto_load_thread_db = true;
/* Set to true if load-time libthread_db tests have been enabled
- by the "maintenence set check-libthread-db" command. */
+ by the "maintenance set check-libthread-db" command. */
static bool check_thread_db_on_load = false;
/* "show" command for the auto_load_thread_db configuration variable. */
bfd_hash_table_free (&table);
- /* We need to clear SYMFILE_MAINLINE to avoid interractive question
+ /* We need to clear SYMFILE_MAINLINE to avoid interactive question
from symfile.c:symbol_file_add_with_addrs_or_offsets. */
symbol_file_add_from_bfd
(abfd.get (), name, symfile_flags & ~(SYMFILE_MAINLINE | SYMFILE_VERBOSE),
s = new_symbol (sh_name);
SYMBOL_DOMAIN (s) = VAR_DOMAIN;
SYMBOL_CLASS (s) = LOC_BLOCK;
- /* Donno its type, hope int is ok. */
+ /* Don't know its type, hope int is ok. */
SYMBOL_TYPE (s)
= lookup_function_type (objfile_type (pst->objfile)->builtin_int);
add_symbol (s, top_stack->cur_st, top_stack->cur_block);
(inefficient;
assumes no side-effects result from ignoring ECOFF symbol)
3) create it, but lookup ELF's minimal symbol and use it's section
- during relocation, then modify "uniqify" phase to merge and
+ during relocation, then modify "uniquify" phase to merge and
eliminate the duplicate symbol
(highly inefficient)
/* Usually there is a local and a global stProc symbol
for a function. This means that the function name
- has already been entered into the mimimal symbol table
+ has already been entered into the minimal symbol table
while processing the global symbols in pass 2 above.
One notable exception is the PROGRAM name from
f77 compiled executables, it is only put out as
return;
pst->readin = 1;
- /* Read in all partial symbtabs on which this one is dependent.
+ /* Read in all partial symtabs on which this one is dependent.
NOTE that we do have circular dependencies, sigh. We solved
that by setting pst->readin before this point. */
/* Given a hardware table entry HW representing a register set, return
a pointer to the keyword table with all the register names. If HW
- is NULL, return NULL, to propage the "no such register set" info
+ is NULL, return NULL, to propagate the "no such register set" info
along. */
static CGEN_KEYWORD *
register_set_keyword_table (const CGEN_HW_ENTRY *hw)
case TYPE_CODE_ARRAY:
/* HACK! Structures containing arrays, even small ones, are not
- elligible for returning in registers. */
+ eligible for returning in registers. */
return 256;
case TYPE_CODE_TYPEDEF:
into the scope DEST. ALIAS is the name of the imported namespace
in the current scope. If ALIAS is NULL then the namespace is known
by its original name. DECLARATION is the name if the imported
- varable if this is a declaration import (Eg. using A::x), otherwise
+ variable if this is a declaration import (Eg. using A::x), otherwise
it is NULL. EXCLUDES is a list of names not to import from an
imported module or NULL. If COPY_NAMES is non-zero, then the
arguments are copied into newly allocated memory so they can be
searching the objfiles in the order they are stored internally,
ignoring CURRENT_OBJFILE.
- On most platorms, it should be close enough to doing the best
+ On most platforms, it should be close enough to doing the best
we can without some knowledge specific to the architecture. */
void
else
{
/* For scalar operations we need to avoid evaluating operands
- unecessarily. However, for vector operations we always need to
+ unnecessarily. However, for vector operations we always need to
evaluate both operands. Unfortunately we only know which of the
two cases apply after we know the type of the second operand.
Therefore we evaluate it once using EVAL_AVOID_SIDE_EFFECTS. */
l.sw lr_loc(r1),r9 # Link (return) address
- The link register is usally saved at fp_loc - 4. It may not be saved at
+ The link register is usually saved at fp_loc - 4. It may not be saved at
all in a leaf function.
l.sw reg_loc(r1),ry # Save any callee saved regs
continue;
/* If the architecture described by ARCH_INFO can run code for
- the architcture we registered the handler for, then the
+ the architecture we registered the handler for, then the
handler is applicable. Note, though, that if the handler is
for an architecture that is a superset of ARCH_INFO, we can't
use that --- it would be perfectly correct for it to install
perror_with_name (_("Unable to store AltiVec registers"));
}
-/* Assuming TID referrs to an SPE process, set the top halves of TID's
+/* Assuming TID refers to an SPE process, set the top halves of TID's
general-purpose registers and its SPE-specific registers to the
values in EVRREGSET. If we don't support PTRACE_SETEVRREGS, do
nothing.
syscall ids into a canonical set of syscall ids used by process
record. (See arch/powerpc/include/uapi/asm/unistd.h in kernel tree.)
Return -1 if this system call is not supported by process record.
- Otherwise, return the syscall number for preocess reocrd of given
+ Otherwise, return the syscall number for process record of given
SYSCALL. */
static enum gdb_syscall
void
_initialize_ppc_linux_tdep (void)
{
- /* Register for all sub-familes of the POWER/PowerPC: 32-bit and
+ /* Register for all sub-families of the POWER/PowerPC: 32-bit and
64-bit PowerPC, and the older rs6k. */
gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc, GDB_OSABI_LINUX,
ppc_linux_init_abi);
are passed in user stack.
If the function is returning a structure, then the return address is passed
- in r3, then the first 7 words of the parametes can be passed in registers,
+ in r3, then the first 7 words of the parameters can be passed in registers,
starting from r4. */
CORE_ADDR
d->enabled_p = *(int *) data;
}
-/* Implamentation of both the "disable display" and "enable display"
+/* Implementation of both the "disable display" and "enable display"
commands. ENABLE decides what to do. */
static void
several. Here is some rationale:
There are several file descriptors that may need to be open
- for any given process or LWP. The ones we're intereted in are:
+ for any given process or LWP. The ones we're interested in are:
- control (ctl) write-only change the state
- status (status) read-only query the state
- address space (as) read/write access memory
}
/* Reset inherit_on_fork flag. If the process forks a child while we
- are registered for events in the parent, then we will NOT recieve
+ are registered for events in the parent, then we will NOT receive
events from the child. Returns non-zero for success, zero for
failure. */
File descriptors are also cached. As they are a limited resource,
we cannot hold onto them indefinitely. However, as they are
expensive to open, we don't want to throw them away
- indescriminately either. As a compromise, we will keep the file
+ indiscriminately either. As a compromise, we will keep the file
descriptors for the parent process, but discard any file
descriptors we may have accumulated for the threads.
For the latter, EXECUTING is false and this has no effect.
For the former, EXECUTING is true and we're in wait, about to
move the thread. Since we need to recompute the stack, we temporarily
- set EXECUTING to flase. */
+ set EXECUTING to false. */
executing = tp->executing;
set_executing (inferior_ptid, false);
if (first_record_full_end
&& execution_direction == EXEC_REVERSE)
{
- /* When reverse excute, the first
+ /* When reverse execute, the first
record_full_end is the part of current
instruction. */
first_record_full_end = 0;
}
}
- /* Check if system(3) has been explicitely allowed using the
+ /* Check if system(3) has been explicitly allowed using the
`set remote system-call-allowed 1' command. If length is 0,
indicating a NULL parameter to the system call, return zero to
indicate a shell is not available. Otherwise fail with EPERM. */
memory packets to ``host::sizeof long'' bytes - (typically 32
bits). Consequently, for 64 bit targets, the upper 32 bits of an
address was never sent. Since fixing this bug may cause a break in
- some remote targets this variable is principly provided to
+ some remote targets this variable is principally provided to
facilitate backward compatibility. */
static unsigned int remote_address_size;
if (buf[0] == 'E'
&& isxdigit (buf[1]) && isxdigit (buf[2])
&& buf[3] == '\0')
- /* "Enn" - definitly an error. */
+ /* "Enn" - definitely an error. */
return PACKET_ERROR;
/* Always treat "E." as an error. This will be used for
<GDB marks the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN>
2.5) <-- (registers reply to step #2.3)
- Eventualy after step #2.5, we return to the event loop, which
+ Eventually after step #2.5, we return to the event loop, which
notices there's an event on the
REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN event and calls the
associated callback --- the function below. At this point, we're
this masking operation is equal to BL_INSTRUCTION, then the opcode in
question is a ``bl'' instruction.
- BL_DISPLACMENT_MASK is anded with the opcode in order to extract
+ BL_DISPLACEMENT_MASK is anded with the opcode in order to extract
the branch displacement. */
#define BL_MASK 0xfc000001
{
struct mem_read_abstraction_base base; /* The parent struct. */
bfd_vma memaddr; /* Where to read from. */
- struct disassemble_info* info; /* The disassember to use for reading. */
+ struct disassemble_info* info; /* The disassembler to use for reading. */
};
/* Advance the reader by one byte. */
set_gdbarch_register_type (gdbarch, s12z_register_type);
frame_unwind_append_unwinder (gdbarch, &s12z_frame_unwind);
- /* Currently, the only known producer for this archtecture, produces buggy
+ /* Currently, the only known producer for this architecture, produces buggy
dwarf CFI. So don't append a dwarf unwinder until the situation is
better understood. */
inst_t *inst = NULL;
if (memblock != NULL)
{
- /* Reading memory block from target succefully and got all
+ /* Reading memory block from target successfully and got all
the instructions(from STARTADDR to PC) needed. */
score7_adjust_memblock_ptr (&memblock, prev_pc, cur_pc);
inst = score7_fetch_inst (gdbarch, cur_pc, memblock);
/* >= 0 (TIMER_SCHEDULED) */
/* The ID of the currently scheduled timer event. This state is
rarely encountered. Timer events are one-off so as soon as the
- event is delivered the state is shanged to NOTHING_SCHEDULED. */
+ event is delivered the state is changed to NOTHING_SCHEDULED. */
FD_SCHEDULED = -1,
/* The fd_event() handler is scheduled. It is called when ever the
file descriptor becomes ready. */
/* PUSH_EVENT: The input FIFO is non-empty (or there is a pending
error). Nag the client until all the data has been read. In the
case of errors, the client will need to close or de-async the
- device before naging stops. */
+ device before nagging stops. */
static void
push_event (void *context)
/* We've never heard about this port. We should fail this call,
unless they are asking about one of the 3 standard handles,
in which case we pretend the handle was open by us if it is
- connected to a terminal device. This is beacuse Unix
+ connected to a terminal device. This is because Unix
terminals use the serial interface, so GDB expects the
standard handles to go through here. */
if (scb->fd >= 3 || !isatty (scb->fd))
if (symtab == NULL)
error (_("No default file now."));
- /* It is not a typo, symtab_to_filename_for_display woule be needlessly
+ /* It is not a typo, symtab_to_filename_for_display would be needlessly
ambiguous. */
filename = symtab_to_fullname (symtab);
}
beneath->detach (inf, from_tty);
}
-/* Resume execution of process PTID. If STEP is nozero, then just
+/* Resume execution of process PTID. If STEP is nonzero, then just
single step it. If SIGNAL is nonzero, restart it with that signal
activated. We may have to convert PTID from a thread ID to an LWP
ID for procfs. */
... Though the system chooses virtual addresses for
individual processes, it maintains the segments' relative
positions. Because position-independent code uses relative
- addressesing between segments, the difference between
+ addressing between segments, the difference between
virtual addresses in memory must match the difference
between virtual addresses in the file. The difference
between the virtual address of any segment in memory and
/* Most OS'es that have SVR4-style ELF dynamic libraries define a
`struct r_debug' and a `struct link_map' that are binary compatible
- with the origional SVR4 implementation. */
+ with the original SVR4 implementation. */
/* Fetch (and possibly build) an appropriate `struct link_map_offsets'
for an ILP32 SVR4 system. */
* If IS_SOLIB is non-zero:
* Look in inferior's $LD_LIBRARY_PATH.
*
- * The last check avoids doing this search when targetting remote
+ * The last check avoids doing this search when targeting remote
* machines since a sysroot will almost always be set.
*/
/* Open a source file given a symtab S. Returns a file descriptor or
negative number for error.
- This function is a convience function to find_and_open_source. */
+ This function is a convenience function to find_and_open_source. */
scoped_fd
open_source_file (struct symtab *s)
belong to the selected thread (the LWP could be in the middle of
executing the thread switch code).
- These functions should instead be paramaterized with an explicit
+ These functions should instead be parameterized with an explicit
object (struct regcache, struct thread_info?) into which the LWPs
registers can be written. */
pid = get_ptrace_pid (regcache->ptid ());
globalization prefix is followed by the function name (nested
static variables within a function are supposed to generate a
warning message, and are left alone). The procedure is
- documented in the Stabs Interface Manual, which is distrubuted
+ documented in the Stabs Interface Manual, which is distributed
with the compilers, although version 4.0 of the manual seems to
be incorrect in some places, at least for SPARC. The
globalization prefix is encoded into an N_OPT stab, with the form
if (fused_p)
{
/* Fused compare-and-branch instructions are non-delayed,
- and do not have an annuling capability. So we need to
+ and do not have an annulling capability. So we need to
always set a breakpoint on both the NPC and the branch
target address. */
gdb_assert (offset != 0);
/* The psABI says that "Every stack frame must be 16-byte aligned." */
sp &= ~0xf;
- /* Now we store the arguments in to the "paramater array". Some
+ /* Now we store the arguments in to the "parameter array". Some
Integer or Pointer arguments and Structure or Union arguments
will be passed in %o registers. Some Floating arguments and
floating members of structures are passed in floating-point
&& len == twos_complement_bits / 3))
{
/* Ok, we have enough characters for a signed value, check
- for signness by testing if the sign bit is set. */
+ for signedness by testing if the sign bit is set. */
sign_bit = (twos_complement_bits % 3 + 2) % 3;
c = *p - '0';
if (c & (1 << sign_bit))
int set_current_sal)
{
- /* For mi, alway print location and address. */
+ /* For mi, always print location and address. */
if (current_uiout->is_mi_like_p ())
print_what = LOC_AND_ADDRESS;
read in.
Errors are printed as if they would be the parameter value. Use zeroed ARG
- iff it should not be printed accoring to user settings. */
+ iff it should not be printed according to user settings. */
static void
print_frame_arg (const frame_print_options &fp_opts,
int i;
/* Find lowest loadable section to be used as starting point for
- continguous sections. */
+ contiguous sections. */
lower_sect = NULL;
bfd_map_over_sections (abfd, find_lowest_section, &lower_sect);
if (lower_sect == NULL)
into a format-specific offset table --- a `struct section_offsets'.
The sectindex field is used to control the ordering of sections
with the same name. Upon return, it is updated to contain the
- correspondig BFD section index, or -1 if the section was not found.
+ corresponding BFD section index, or -1 if the section was not found.
ADD_FLAGS encodes verbosity level, whether this is main symbol or
an extra symbol file such as dynamically loaded code, and wether
https://sourceware.org/ml/gdb-patches/2019-04/msg00605.html
- If some of those scenarions need to be supported, we will need to
+ If some of those scenarios need to be supported, we will need to
use a different condition for HAS_DRIVE_SPEC and a different macro
instead of STRIP_DRIVE_SPEC, which work on Posix systems as well. */
std::string drive;
}
else
{
- /* Gratuitous qoute: skip it and move on. */
+ /* Gratuitous quote: skip it and move on. */
p++;
continue;
}
}
-/* Test the convesion process of a target description to/from xml: Take a target
+/* Test the conversion process of a target description to/from xml: Take a target
description TDESC, convert to xml, back to a description, and confirm the new
tdesc is identical to the original. */
static bool
/* For binary floating-point formats that do not match any host format,
use mpfr_t as intermediate format to provide precise target-floating
- point emulation. However, if the MPFR library is not availabe,
+ point emulation. However, if the MPFR library is not available,
use the largest host floating-point type as intermediate format. */
case target_float_ops_kind::binary:
{
step_over_chain_remove (&step_over_queue_head, tp);
}
-/* Delete the thread referenced by THR. If SILENT, don't notifyi
+/* Delete the thread referenced by THR. If SILENT, don't notify
the observer of this exit.
THR must not be NULL or a failed assertion will be raised. */
delete_thread (tp);
}
-/* Return true value if stack temporaies are enabled for the thread
+/* Return true value if stack temporaries are enabled for the thread
TP. */
bool
commands and either:
- the user specified "unlimited", which maps to UINT_MAX, or
- - the user spedified some number between INT_MAX and UINT_MAX.
+ - the user specified some number between INT_MAX and UINT_MAX.
Cap "infinity" to approximately sqrt(INT_MAX) so that we don't
overflow in rl_set_screen_size, which multiplies rows and columns
/* Print a variable number of ARGS using format FORMAT. If this
information is going to put the amount written (since the last call
to REINITIALIZE_MORE_FILTER or the last page break) over the page size,
- call prompt_for_continue to get the users permision to continue.
+ call prompt_for_continue to get the users permission to continue.
Unlike fprintf, this function does not return a value.
/* Return a value with type TYPE located at ADDR.
Call value_at only if the data needs to be fetched immediately;
- if we can be 'lazy' and defer the fetch, perhaps indefinately, call
+ if we can be 'lazy' and defer the fetch, perhaps indefinitely, call
value_at_lazy instead. value_at_lazy simply records the address of
the data and sets the lazy-evaluation-required flag. The lazy flag
is tested in the value_contents macro, which is used if and when
/* Create a value for a FORTRAN complex number. Currently most of the
time values are coerced to COMPLEX*16 (i.e. a complex number
composed of 2 doubles. This really should be a smarter routine
- that figures out precision inteligently as opposed to assuming
+ that figures out precision intelligently as opposed to assuming
doubles. FIXME: fmb */
struct value *
(leading 0 or 0x).
Hilfinger/2004-09-09: USE_C_FORMAT was originally called USE_LOCAL
- and was intended to request formating according to the current
+ and was intended to request formatting according to the current
language and would be used for most integers that GDB prints. The
exceptional cases were things like protocols where the format of
the integer is a protocol thing, not a user-visible thing). The
obstack, 0, &need_escape);
obstack_grow_wstr (obstack, LCST (">"));
- /* We do not attempt to outupt anything after this. */
+ /* We do not attempt to output anything after this. */
state = FINISH;
break;
using zuinteger_unlimited_option_def
= gdb::option::zuinteger_unlimited_option_def<value_print_options>;
-/* Definions of options for the "print" and "compile print"
+/* Definitions of options for the "print" and "compile print"
commands. */
static const gdb::option::option_def value_print_option_defs[] = {
intvar = expr->elts[2].internalvar;
/* Only evaluate the expression if the lvalue is void.
- This may still fail if the expresssion is invalid. */
+ This may still fail if the expression is invalid. */
if (intvar->kind == INTERNALVAR_VOID)
evaluate_expression (expr.get ());
}
value were accessible.
This differs from VAR->type in that VAR->type is always
- the true type of the expession in the source language.
+ the true type of the expression in the source language.
The return value of this function is the type we're
actually storing in varobj, and using for displaying
the values and for comparing previous and new values.
static int have_saved_context; /* True if we've saved context from a
cygwin signal. */
#ifdef __CYGWIN__
-static CONTEXT saved_context; /* Containes the saved context from a
+static CONTEXT saved_context; /* Contains the saved context from a
cygwin signal. */
#endif
Note that no notification was printed when the main thread
was created, and thus, unless in verbose mode, we should be
- symetrical, and avoid that notification for the main thread
+ symmetrical, and avoid that notification for the main thread
here as well. */
if (info_verbose)
c_type value of main symbol table will be set only in case of
C_EXT/C_HIDEEXT/C_WEAKEXT storage class symbols.
Bit 10 of type is set if symbol is a function, ie the value is set
- to 32(0x20). So we need to read the first function auxiliay entry
+ to 32(0x20). So we need to read the first function auxiliary entry
which contains the size. */
if (cs->c_naux > 1 && ISFCN (cs->c_type))
{
continue;
}
/* Read the csect auxiliary header, which is always the last by
- onvention. */
+ convention. */
bfd_coff_swap_aux_in (abfd,
raw_auxptr
+ ((coff_data (abfd)->local_symesz)
to the function in r2. Further arguments are beginning in r3 then.
R13 is used as frame pointer when GCC compiles w/o optimization
R14 is used as "PSW", displaying the CPU status.
- R15 is used implicitely as stack pointer. */
+ R15 is used implicitly as stack pointer. */
E_R0_REGNUM,
E_R1_REGNUM,
E_R2_REGNUM, E_1ST_ARG_REGNUM = E_R2_REGNUM, E_PTR_RET_REGNUM = E_R2_REGNUM,
/* Each element of xtensa_call0_frame_cache.c0_rt[] describes for each
A-register where the current content of the reg came from (in terms
of an original reg and a constant). Negative values of c0_rt[n].fp_reg
- mean that the orignal content of the register was saved to the stack.
+ mean that the original content of the register was saved to the stack.
c0_rt[n].fr.ofs is NOT the offset from the frame base because we don't
know where SP will end up until the entire prologue has been analyzed. */
int c0_hasfp; /* Current frame uses frame pointer. */
int fp_regnum; /* A-register used as FP. */
int c0_fp; /* Actual value of frame pointer. */
- int c0_fpalign; /* Dinamic adjustment for the stack
+ int c0_fpalign; /* Dynamic adjustment for the stack
pointer. It's an AND mask. Zero,
if alignment was not adjusted. */
int c0_old_sp; /* In case of dynamic adjustment, it is
if ((cache->wd.ws & (1 << cache->wd.wb)) == 0)
{
/* Register window overflow already happened.
- We can read caller's SP from the proper spill loction. */
+ We can read caller's SP from the proper spill location. */
sp = get_frame_register_unsigned
(this_frame, gdbarch_tdep (gdbarch)->a0_base + 1);
cache->prev_sp = read_memory_integer (sp - 12, 4, byte_order);
static int xtensa_session_once_reported = 1;
/* Report a problem with prologue analysis while doing backtracing.
- But, do it only once to avoid annoyng repeated messages. */
+ But, do it only once to avoid annoying repeated messages. */
static void
warning_once (void)
/* Set the return address of dummy frame to the dummy address.
The return address for the current function (in A0) is
- saved in the dummy frame, so we can savely overwrite A0 here. */
+ saved in the dummy frame, so we can safely overwrite A0 here. */
if (gdbarch_tdep (gdbarch)->call_abi != CallAbiCall0Only)
{
be within a bundle. Updates the destination register tracking info
accordingly. The pc is needed only for pc-relative load instructions
(eg. l32r). The SP register number is needed to identify stores to
- the stack frame. Returns 0, if analysis was succesfull, non-zero
+ the stack frame. Returns 0, if analysis was successful, non-zero
otherwise. */
static int
body_pc = prologue_sal.end;
/* If we are going to analyze the prologue in general without knowing about
- the current PC, make the best assumtion for the end of the prologue. */
+ the current PC, make the best assumption for the end of the prologue. */
if (pc == 0)
{
find_pc_partial_function (start, 0, NULL, &end_pc);
projects / binutils-gdb.git / commitdiff