-[+ AutoGen5 template -*- Mode: Makefile -*-
+[+ AutoGen5 template
in
+]
INSTALL_DOSREL = install-dosrel-fake
-AS = as
-AR = ar
+AS = @AS@
+AR = @AR@
AR_FLAGS = rc
CC = cc
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
HOST_CC = $(CC_FOR_BUILD)
-BUILD_PREFIX =
-BUILD_PREFIX_1 = loser-
+BUILD_PREFIX = @BUILD_PREFIX@
+BUILD_PREFIX_1 = @BUILD_PREFIX_1@
# These flag values are normally overridden by the configure script.
CFLAGS = -g
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-DLLTOOL = dlltool
-WINDRES = windres
+DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
-NM = nm
+NM = @NM@
-LD = ld
+LD = @LD@
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
DEFAULT_M4 = @DEFAULT_M4@
-BISON = `if [ -f $$r/bison/bison ] ; then \
+BISON=@BISON@
+USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -L $$s/bison/ ; \
else \
echo bison ; \
fi`
-YACC = `if [ -f $$r/bison/bison ] ; then \
+YACC=@YACC@
+USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -y -L $$s/bison/ ; \
elif [ -f $$r/byacc/byacc ] ; then \
echo $$r/byacc/byacc ; \
echo ${DEFAULT_YACC} ; \
fi`
-LEX = `if [ -f $$r/flex/flex ] ; \
+LEX=@LEX@
+USUAL_LEX = `if [ -f $$r/flex/flex ] ; \
then echo $$r/flex/flex ; \
else echo ${DEFAULT_LEX} ; fi`
# For an installed makeinfo, we require it to be from texinfo 4 or
# higher, else we use the "missing" dummy.
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
+MAKEINFO=@MAKEINFO@
+USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else if (makeinfo --version \
| egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
# compilers to use to create programs which must be run in the build
# environment.
-CC_FOR_BUILD = $(CC)
+CC_FOR_BUILD = @CC_FOR_BUILD@
CXX_FOR_BUILD = $(CXX)
SUBDIRS = @configdirs@
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
+GCC_FOR_TARGET=@GCC_FOR_TARGET@
+USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
-AS_FOR_TARGET = ` \
+AS_FOR_TARGET=@AS_FOR_TARGET@
+USUAL_AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
fi; \
fi`
-LD_FOR_TARGET = ` \
+LD_FOR_TARGET=@LD_FOR_TARGET@
+USUAL_LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
fi; \
fi`
-DLLTOOL_FOR_TARGET = ` \
+DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
+USUAL_DLLTOOL_FOR_TARGET = ` \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
fi; \
fi`
-WINDRES_FOR_TARGET = ` \
+WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
+USUAL_WINDRES_FOR_TARGET = ` \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
fi; \
fi`
-AR_FOR_TARGET = ` \
+AR_FOR_TARGET=@AR_FOR_TARGET@
+USUAL_AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
fi; \
fi`
-RANLIB_FOR_TARGET = ` \
+RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
+USUAL_RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
fi; \
fi`
-NM_FOR_TARGET = ` \
+NM_FOR_TARGET=@NM_FOR_TARGET@
+USUAL_NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
-ALL_MODULES =[+
- FOR host_modules +] \
- all-[+module+][+
- ENDFOR host_modules +] \
+ALL_MODULES = [+ FOR host_modules +][+ IF with_x +][+ ELSE with_x +]\
+ all-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]\
$(EXTRA_TARGET_HOST_ALL_MODULES)
# This is a list of the check targets for all of the modules which are
check-flex \
check-zip
-CROSS_CHECK_MODULES =[+
- FOR host_modules +][+
- IF (not (or (exist? "no_check_cross") (exist? "no_check")))
- +] \
- check-[+module+][+
- ENDIF no_check +][+
- ENDFOR host_modules +] \
+CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check +][+ ELIF no_check_cross +][+ ELIF with_x +][+ ELSE check +]\
+ check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\
$(EXTRA_TARGET_HOST_CHECK_MODULES)
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
-INSTALL_MODULES =[+
- FOR host_modules+][+
- IF (not (exist? "no_install")) +] \
- install-[+module+][+
- ENDIF no_install +][+
- ENDFOR host_modules +] \
+INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELIF with_x +][+ ELSE install +]\
+ install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\
$(EXTRA_TARGET_HOST_INSTALL_MODULES)
# This is a list of the targets for all of the modules which are compiled
# using $(X11_FLAGS_TO_PASS).
-ALL_X11_MODULES = \
- all-gdb \
- all-expect \
- all-guile \
- all-tclX \
- all-tk \
- all-tix
+ALL_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
+ all-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
-CHECK_X11_MODULES = \
- check-gdb \
- check-guile \
- check-expect \
- check-tclX \
- check-tk \
- check-tix
+CHECK_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
+ check-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
-INSTALL_X11_MODULES = \
- install-gdb \
- install-guile \
- install-expect \
- install-tclX \
- install-tk \
- install-tix
+INSTALL_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
+ install-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
-ALL_TARGET_MODULES =[+
- FOR target_modules +] \
- all-target-[+module+][+
- ENDFOR target_modules +]
+ALL_TARGET_MODULES = [+ FOR target_modules +]\
+ all-target-[+module+] [+ ENDFOR target_modules +]
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
-CONFIGURE_TARGET_MODULES =[+
- FOR target_modules +] \
- configure-target-[+module+][+
- ENDFOR target_modules +]
+CONFIGURE_TARGET_MODULES = [+ FOR target_modules +]\
+ configure-target-[+module+] [+ ENDFOR target_modules +]
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
-CHECK_TARGET_MODULES =[+
- FOR target_modules +][+
- IF (not (exist? "no_check")) +] \
- check-target-[+module+][+
- ENDIF no_check +][+
- ENDFOR target_modules +]
+CHECK_TARGET_MODULES = [+ FOR target_modules +][+ IF no_check +][+ ELSE check +]\
+ check-target-[+module+] [+ ENDIF no_check +][+ ENDFOR target_modules +]
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
-INSTALL_TARGET_MODULES =[+
- FOR target_modules +][+
- IF (not (exist? "no_install")) +] \
- install-target-[+module+][+
- ENDIF no_install +][+
- ENDFOR target_modules +]
+INSTALL_TARGET_MODULES = [+ FOR target_modules +][+ IF no_install +][+ ELSE install +]\
+ install-target-[+module+] [+ ENDIF no_install +][+ ENDFOR target_modules +]
# This is a list of the targets for which we can do a clean-{target}.
-CLEAN_MODULES =[+
- FOR host_modules +][+
- IF (not (exist? "no_clean")) +] \
- clean-[+module+][+
- ENDIF no_clean +][+
- ENDFOR host_modules +]
+CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELIF with_x +][+ ELSE clean +]\
+ clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +]
# All of the target modules that can be cleaned
-CLEAN_TARGET_MODULES =[+
- FOR target_modules +][+
- IF (not (exist? "no_clean")) +] \
- clean-target-[+module+][+
- ENDIF no_clean +][+
- ENDFOR target_modules +]
+CLEAN_TARGET_MODULES = [+ FOR target_modules +][+ IF no_clean +][+ ELSE clean +]\
+ clean-target-[+module+] [+ ENDIF no_clean +][+ ENDFOR target_modules +]
# All of the x11 modules that can be cleaned
-CLEAN_X11_MODULES = \
- clean-gdb \
- clean-expect \
- clean-guile \
- clean-tclX \
- clean-tk \
- clean-tix
+CLEAN_X11_MODULES = [+ FOR host_modules +][+ IF with_x +]\
+ clean-[+module+] [+ ENDIF with_x +][+ ENDFOR host_modules +]
# The target built for a native build.
.PHONY: all.normal
program_transform_name=
program_transform_nameoption=
redirect=
-removing=
site=
site_makefile_frag=
site_option=
srcdir=
srctrigger=
-subdirs=
target_alias=NOTARGET
target_makefile_frag=
undefs=NOUNDEFS
program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
program_transform_nameoption="${program_transform_nameoption} --program-transform-name='$optarg'"
;;
- --rm)
- removing=--rm
- ;;
--sb*)
sbindir=$optarg
diroptions="$diroptions --sbindir=$optarg"
${program_transform_nameoption} ${site_option} \
${withoptions} ${withoutoptions} \
${enableoptions} ${disableoptions} ${floating_pointoption} \
- ${cache_file_option} ${removing} ${other_options} ${redirect}
+ ${cache_file_option} ${other_options} ${redirect}
else
echo '***' There is no configure script present though. 1>&2
fi
test -n "$DEFAULT_LEX" && break
done
+
if [ "${build}" != "${host}" ]; then
# If we are doing a Canadian Cross, in which the host and build systems
# are not the same, we set reasonable default values for the tools.
-
tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
tools="${tools} CC_FOR_TARGET CXX_FOR_TARGET GCJ_FOR_TARGET"
tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
export OBJCOPY
export OBJDUMP
else
+ # Set reasonable default values for some tools even if not Canadian.
+ # Of course, these are different reasonable default values, originally
+ # specified directly in the Makefile.
+ # We don't export, so that autoconf can do its job.
+ # Note that all these settings are above the fragment inclusion point
+ # in Makefile.in, so can still be overridden by fragments.
+ # This is all going to change when we autoconfiscate...
+
+ tools="AR AR_FOR_TARGET AS AS_FOR_TARGET BISON CC_FOR_BUILD"
+ tools="${tools} DLLTOOL DLLTOOL_FOR_TARGET GCC_FOR_TARGET BUILD_PREFIX"
+ tools="${tools} BUILD_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
+ tools="${tools} NM_FOR_TARGET RANLIB_FOR_TARGET"
+ tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
+
+ AR=ar
+ AR_FOR_TARGET='\$(USUAL_AR_FOR_TARGET)'
+ AS=as
+ AS_FOR_TARGET='\$(USUAL_AS_FOR_TARGET)'
+ BISON='$(USUAL_BISON)'
+ CC_FOR_BUILD='\$(CC)'
+ DLLTOOL=dlltool
+ DLLTOOL_FOR_TARGET='\$(USUAL_DLLTOOL_FOR_TARGET)'
+ GCC_FOR_TARGET='\$(USUAL_GCC_FOR_TARGET)'
+ BUILD_PREFIX=
+ BUILD_PREFIX_1=loser-
+ LD=ld
+ LD_FOR_TARGET='\$(USUAL_LD_FOR_TARGET)'
+ MAKEINFO='\$(USUAL_MAKEINFO)'
+ NM=nm
+ NM_FOR_TARGET='\$(USUAL_NM_FOR_TARGET)'
+ RANLIB_FOR_TARGET='\$(USUAL_RANLIB_FOR_TARGET)'
+ WINDRES=windres
+ WINDRES_FOR_TARGET='\$(USUAL_WINDRES_FOR_TARGET)'
+ LEX='\$(USUAL_LEX)'
+ YACC='\$(USUAL_YACC)'
+
# If CC is still not set, try to get gcc.
if [ -z "${CC}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
all_build_modules='$(ALL_BUILD_MODULES_LIST)'
fi
-for subdir in . ${subdirs} ; do
-
- # ${subdir} is relative path from . to the directory we're currently
- # configuring.
- # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
- invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
-
- ### figure out what to do with srcdir
- case "${srcdir}" in
- ".") # no -srcdir option. We're building in place.
- makesrcdir=. ;;
- /* | [A-Za-z]:[\\/]* ) # absolute path
- makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
- ;;
- *) # otherwise relative
- case "${subdir}" in
- .) makesrcdir=${srcdir} ;;
- *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
- esac
- ;;
- esac
-
- if [ "${subdir}/" != "./" ] ; then
- Makefile=${subdir}/Makefile
- fi
+# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
+# Set up the list of links to be made.
+# ${links} is the list of link names, and ${files} is the list of names to link to.
- if [ ! -d ${subdir} ] ; then
- if mkdir ${subdir} ; then
- true
- else
- echo '***' "${progname}: could not make ${PWD=`${PWDCMD-pwd}`}/${subdir}" 1>&2
- exit 1
- fi
+# Make the links.
+configlinks="${links}"
+if [ -r ./config.status ] ; then
+ mv -f ./config.status ./config.back
+fi
+while [ -n "${files}" ] ; do
+ # set file to car of files, files to cdr of files
+ set ${files}; file=$1; shift; files=$*
+ set ${links}; link=$1; shift; links=$*
+
+ if [ ! -r ${srcdir}/${file} ] ; then
+ if [ ! -r ${file} ] ; then
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
+ exit 1
+ else
+ srcfile=${file}
fi
+ else
+ srcfile=${srcdir}/${file}
+ fi
- case "${removing}" in
- "")
- case "${subdir}" in
- .) ;;
- *) eval echo Building in ${subdir} ${redirect} ;;
- esac
-
- # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
- # Set up the list of links to be made.
- # ${links} is the list of link names, and ${files} is the list of names to link to.
-
- # Make the links.
- configlinks="${links}"
- if [ -r ${subdir}/config.status ] ; then
- mv -f ${subdir}/config.status ${subdir}/config.back
- fi
- while [ -n "${files}" ] ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if [ ! -r ${srcdir}/${file} ] ; then
- if [ ! -r ${file} ] ; then
-
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
- exit 1
- else
- srcfile=${file}
- fi
- else
- srcfile=${srcdir}/${file}
- fi
-
- ${remove} -f ${link}
- # Make a symlink if possible, otherwise try a hard link
- if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
- true
- else
- # We need to re-remove the file because Lynx leaves a
- # very strange directory there when it fails an NFS symlink.
- ${remove} -r -f ${link}
- ${hard_link} ${srcfile} ${link}
- fi
- if [ ! -r ${link} ] ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
- exit 1
- fi
+ ${remove} -f ${link}
+ # Make a symlink if possible, otherwise try a hard link
+ if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
+ true
+ else
+ # We need to re-remove the file because Lynx leaves a
+ # very strange directory there when it fails an NFS symlink.
+ ${remove} -r -f ${link}
+ ${hard_link} ${srcfile} ${link}
+ fi
+ if [ ! -r ${link} ] ; then
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
+ exit 1
+ fi
- echo "Linked \"${link}\" to \"${srcfile}\"."
- done
+ echo "Linked \"${link}\" to \"${srcfile}\"."
+done
- # Create a .gdbinit file which runs the one in srcdir
- # and tells GDB to look there for source files.
+# Create a .gdbinit file which runs the one in srcdir
+# and tells GDB to look there for source files.
- if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
- case ${srcdir} in
- .) ;;
- *) cat > ${subdir}/.gdbinit <<EOF
+if [ -r ${srcdir}/.gdbinit ] ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ./.gdbinit <<EOF
# ${NO_EDIT}
-dir ${makesrcdir}
+dir ${srcdir}
dir .
-source ${makesrcdir}/.gdbinit
+source ${srcdir}/.gdbinit
EOF
- ;;
- esac
- fi
+ ;;
+ esac
+fi
+
+# Install a makefile, and make it set VPATH
+# if necessary so that the sources are found.
+# Also change its value of srcdir.
+# NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
+# been somewhat optimized and is perhaps a bit twisty.
+
+# code is order so as to try to sed the smallest input files we know.
+# so do these separately because I don't trust the order of sed -e expressions.
+
+# the five makefile fragments MUST end up in the resulting Makefile in this order:
+# package macros, target, host, site, and package rules.
+
+if [ -f ${srcdir}/${Makefile_in} ] ; then
- # Install a makefile, and make it set VPATH
- # if necessary so that the sources are found.
- # Also change its value of srcdir.
- # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
- # been somewhat optimized and is perhaps a bit twisty.
-
- # code is order so as to try to sed the smallest input files we know.
- # so do these separately because I don't trust the order of sed -e expressions.
-
- # the five makefile fragments MUST end up in the resulting Makefile in this order:
- # package macros, target, host, site, and package rules.
-
- if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
-
- # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
- rm -f ${subdir}/${Makefile}.tem
- case "${package_makefile_rules_frag}" in
- "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
- *)
- if [ ! -f ${package_makefile_rules_frag} ] ; then
- package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
- fi
- if [ -f ${package_makefile_rules_frag} ] ; then
- sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
- else
- echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
- echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
- cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
- fi
- esac
- # working copy now in ${Makefile}.tem
-
- # Conditionalize for this site.
- rm -f ${Makefile}
- case "${site}" in
- "") mv ${subdir}/Makefile.tem ${Makefile} ;;
- *)
- site_makefile_frag=${srcdir}/config/ms-${site}
-
- if [ -f ${site_makefile_frag} ] ; then
- sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \
- > ${Makefile}
- else
- mv ${subdir}/Makefile.tem ${Makefile}
- site_makefile_frag=
- fi
- ;;
- esac
- # working copy now in ${Makefile}
-
- # Conditionalize the makefile for this host.
- rm -f ${subdir}/Makefile.tem
- case "${host_makefile_frag}" in
- "") mv ${Makefile} ${subdir}/Makefile.tem ;;
- *)
- if [ ! -f ${host_makefile_frag} ] ; then
- host_makefile_frag=${srcdir}/${host_makefile_frag}
- fi
- if [ -f ${host_makefile_frag} ] ; then
- sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
- else
- echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
- echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
- mv ${Makefile} ${subdir}/Makefile.tem
- fi
- esac
- # working copy now in ${subdir)/Makefile.tem
-
- # Conditionalize the makefile for this target.
- rm -f ${Makefile}
- case "${target_makefile_frag}" in
- "") mv ${subdir}/Makefile.tem ${Makefile} ;;
- *)
- if [ ! -f ${target_makefile_frag} ] ; then
- target_makefile_frag=${srcdir}/${target_makefile_frag}
- fi
- if [ -f ${target_makefile_frag} ] ; then
- sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
- else
- mv ${subdir}/Makefile.tem ${Makefile}
- target_makefile_frag=
- fi
- ;;
- esac
- # working copy now in ${Makefile}
-
- # Emit the default values of this package's macros.
- rm -f ${subdir}/Makefile.tem
- case "${package_makefile_frag}" in
- "") mv ${Makefile} ${subdir}/Makefile.tem ;;
- *)
- if [ ! -f ${package_makefile_frag} ] ; then
- package_makefile_frag=${srcdir}/${package_makefile_frag}
- fi
- if [ -f ${package_makefile_frag} ] ; then
- sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
- else
- echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
- echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
- mv ${Makefile} ${subdir}/Makefile.tem
- fi
- esac
- # real copy now in ${subdir}/Makefile.tem
-
- # prepend warning about editing, and a bunch of variables.
- rm -f ${Makefile}
- cat > ${Makefile} <<EOF
+ # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
+ rm -f ./${Makefile}.tem
+ case "${package_makefile_rules_frag}" in
+ "") cp ${srcdir}/${Makefile_in} ./Makefile.tem ;;
+ *)
+ if [ ! -f ${package_makefile_rules_frag} ] ; then
+ package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
+ fi
+ if [ -f ${package_makefile_rules_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${Makefile_in} > ${Makefile}.tem
+ else
+ echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
+ cp ${srcdir}/${Makefile_in} ./Makefile.tem
+ fi
+ esac
+ # working copy now in ${Makefile}.tem
+
+ # Conditionalize for this site.
+ rm -f ${Makefile}
+ case "${site}" in
+ "") mv ./Makefile.tem ${Makefile} ;;
+ *)
+ site_makefile_frag=${srcdir}/config/ms-${site}
+
+ if [ -f ${site_makefile_frag} ] ; then
+ sed -e "/^####/ r ${site_makefile_frag}" ./Makefile.tem > ${Makefile}
+ else
+ mv ./Makefile.tem ${Makefile}
+ site_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${Makefile}
+
+ # Conditionalize the makefile for this host.
+ rm -f ./Makefile.tem
+ case "${host_makefile_frag}" in
+ "") mv ${Makefile} ./Makefile.tem ;;
+ *)
+ if [ ! -f ${host_makefile_frag} ] ; then
+ host_makefile_frag=${srcdir}/${host_makefile_frag}
+ fi
+ if [ -f ${host_makefile_frag} ] ; then
+ sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ./Makefile.tem
+ else
+ echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
+ mv ${Makefile} ./Makefile.tem
+ fi
+ esac
+ # working copy now in ./Makefile.tem
+
+ # Conditionalize the makefile for this target.
+ rm -f ${Makefile}
+ case "${target_makefile_frag}" in
+ "") mv ./Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${target_makefile_frag} ] ; then
+ target_makefile_frag=${srcdir}/${target_makefile_frag}
+ fi
+ if [ -f ${target_makefile_frag} ] ; then
+ sed -e "/^####/ r ${target_makefile_frag}" ./Makefile.tem > ${Makefile}
+ else
+ mv ./Makefile.tem ${Makefile}
+ target_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${Makefile}
+
+ # Emit the default values of this package's macros.
+ rm -f ./Makefile.tem
+ case "${package_makefile_frag}" in
+ "") mv ${Makefile} ./Makefile.tem ;;
+ *)
+ if [ ! -f ${package_makefile_frag} ] ; then
+ package_makefile_frag=${srcdir}/${package_makefile_frag}
+ fi
+ if [ -f ${package_makefile_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ./Makefile.tem
+ else
+ echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`${PWDCMD-pwd}`}. 1>&2
+ mv ${Makefile} ./Makefile.tem
+ fi
+ esac
+ # real copy now in ./Makefile.tem
+
+ # prepend warning about editing, and a bunch of variables.
+ rm -f ${Makefile}
+ cat > ${Makefile} <<EOF
# ${NO_EDIT}
-VPATH = ${makesrcdir}
+VPATH = ${srcdir}
links = ${configlinks}
host_alias = ${host_alias}
host_cpu = ${host_cpu}
target_os = ${target_os}
target_canonical = ${target_cpu}-${target_vendor}-${target_os}
EOF
- case "${build}" in
- "") ;;
- *) cat >> ${Makefile} << EOF
+ case "${build}" in
+ "") ;;
+ *) cat >> ${Makefile} << EOF
build_alias = ${build_alias}
build_cpu = ${build_cpu}
build_vendor = ${build_vendor}
build_os = ${build_os}
build_canonical = ${build_cpu}-${build_vendor}-${build_os}
EOF
- esac
-
- case "${package_makefile_frag}" in
- "") ;;
- /* | [A-Za-z]:[\\/]* ) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
- *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
- esac
-
- case "${target_makefile_frag}" in
- "") ;;
- /* | [A-Za-z]:[\\/]* ) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
- *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
- esac
-
- case "${host_makefile_frag}" in
- "") ;;
- /* | [A-Za-z]:[\\/]* ) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
- *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
- esac
-
- if [ "${site_makefile_frag}" != "" ] ; then
- echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
- fi
-
- echo enable_shared = ${enable_shared} >> ${Makefile}
- echo enable_threads = ${enable_threads} >> ${Makefile}
- # record if we want to rumtime library stuff installed in libsubdir.
- if test -z "${enable_version_specific_runtime_libs}"; then
- echo enable_version_specific_runtime_libs = no >> ${Makefile}
- else
- echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
- fi
+ esac
+
+ case "${package_makefile_frag}" in
+ "") ;;
+ /* | [A-Za-z]:[\\/]* ) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ *) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ /* | [A-Za-z]:[\\/]* ) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ *) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${host_makefile_frag}" in
+ "") ;;
+ /* | [A-Za-z]:[\\/]* ) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ *) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ esac
+
+ if [ "${site_makefile_frag}" != "" ] ; then
+ echo site_makefile_frag = ${site_makefile_frag} >>${Makefile}
+ fi
+
+ echo enable_shared = ${enable_shared} >> ${Makefile}
+ echo enable_threads = ${enable_threads} >> ${Makefile}
+ # record if we want to rumtime library stuff installed in libsubdir.
+ if test -z "${enable_version_specific_runtime_libs}"; then
+ echo enable_version_specific_runtime_libs = no >> ${Makefile}
+ else
+ echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
+ fi
- # Emit a macro which describes the file containing gcc's
- # version number.
- echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
- # And emit a macro defining gcc's version number.
- echo gcc_version = ${gcc_version} >> ${Makefile}
-
- # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
- # remove any form feeds.
- if [ -z "${subdirs}" ]; then
- rm -f ${subdir}/Makefile.tm2
- sedtemp=sed.$$
- cat >$sedtemp <<EOF
+ # Emit a macro which describes the file containing gcc's
+ # version number.
+ echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
+ # And emit a macro defining gcc's version number.
+ echo gcc_version = ${gcc_version} >> ${Makefile}
+
+ # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
+ # remove any form feeds.
+ rm -f ./Makefile.tm2
+ sedtemp=sed.$$
+ cat >$sedtemp <<EOF
s:@configdirs@:${configdirs}:
EOF
- sed -f $sedtemp \
- ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
- rm -f $sedtemp
- rm -f ${subdir}/Makefile.tem
- mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
- fi
- sed -e "s|@prefix@|${prefix}|" \
- -e "s|@exec_prefix@|${exec_prefix}|" \
- -e "s|@bindir@|${bindir}|" \
- -e "s|@sbindir@|${sbindir}|" \
- -e "s|@libexecdir@|${libexecdir}|" \
- -e "s|@datadir@|${datadir}|" \
- -e "s|@sysconfdir@|${sysconfdir}|" \
- -e "s|@sharedstatedir@|${sharedstatedir}|" \
- -e "s|@localstatedir@|${localstatedir}|" \
- -e "s|@libdir@|${libdir}|" \
- -e "s|@includedir@|${includedir}|" \
- -e "s|@oldincludedir@|${oldincludedir}|" \
- -e "s|@infodir@|${infodir}|" \
- -e "s|@mandir@|${mandir}|" \
- -e "s|@all_build_modules@|${all_build_modules}|" \
- -e "/^CC[ ]*=/{
- :loop1
- /\\\\$/ N
- s/\\\\\\n//g
- t loop1
- s%^CC[ ]*=.*$%CC = ${CC}%
- }" \
- -e "/^CXX[ ]*=/{
- :loop2
- /\\\\$/ N
- s/\\\\\\n//g
- t loop2
- s%^CXX[ ]*=.*$%CXX = ${CXX}%
- }" \
- -e "/^CFLAGS[ ]*=/{
- :loop3
- /\\\\$/ N
- s/\\\\\\n//g
- t loop3
- s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
- }" \
- -e "/^CXXFLAGS[ ]*=/{
- :loop4
- /\\\\$/ N
- s/\\\\\\n//g
- t loop4
- s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
- }" \
- -e "s|@config_shell@|${config_shell}|" \
- -e "s|@srcdir@|${makesrcdir}|" \
- -e "s/\f//" \
- -e "s:@program_transform_name@:${program_transform_name}:" \
- -e "s|@tooldir@|${tooldir}|" \
- -e "s|@build_tooldir@|${tooldir}|" \
- -e "s:@DEFAULT_YACC@:${DEFAULT_YACC}:" \
- -e "s:@DEFAULT_LEX@:${DEFAULT_LEX}:" \
- -e "s:@DEFAULT_M4@:${DEFAULT_M4}:" \
- ${subdir}/Makefile.tem >> ${Makefile}
-
- sed -e "s:@GDB_TK@:${GDB_TK}:" ${Makefile} >${Makefile}.tem
- mv -f ${Makefile}.tem ${Makefile}
-
- # If this is a Canadian Cross, preset the values of many more
- # tools.
- if [ "${build}" != "${host}" ]; then
- for var in ${tools}; do
- eval val=\$${var}
- sed -e "/^${var}[ ]*=/{
- :loop1
- /\\\\$/ N
- /\\\\$/ b loop1
- s/\\\\\\n//g
- s%^${var}[ ]*=.*$%${var} = ${val}%
- }" ${Makefile} > ${Makefile}.tem
- mv -f ${Makefile}.tem ${Makefile}
- done
- fi
+ sed -f $sedtemp ./Makefile.tem > ./Makefile.tm2
+ rm -f $sedtemp
+ rm -f ./Makefile.tem
+ mv ./Makefile.tm2 ./Makefile.tem
+ sed -e "s|@prefix@|${prefix}|" \
+ -e "s|@exec_prefix@|${exec_prefix}|" \
+ -e "s|@bindir@|${bindir}|" \
+ -e "s|@sbindir@|${sbindir}|" \
+ -e "s|@libexecdir@|${libexecdir}|" \
+ -e "s|@datadir@|${datadir}|" \
+ -e "s|@sysconfdir@|${sysconfdir}|" \
+ -e "s|@sharedstatedir@|${sharedstatedir}|" \
+ -e "s|@localstatedir@|${localstatedir}|" \
+ -e "s|@libdir@|${libdir}|" \
+ -e "s|@includedir@|${includedir}|" \
+ -e "s|@oldincludedir@|${oldincludedir}|" \
+ -e "s|@infodir@|${infodir}|" \
+ -e "s|@mandir@|${mandir}|" \
+ -e "s|@all_build_modules@|${all_build_modules}|" \
+ -e "/^CC[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop1
+ s%^CC[ ]*=.*$%CC = ${CC}%
+ }" \
+ -e "/^CXX[ ]*=/{
+ :loop2
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop2
+ s%^CXX[ ]*=.*$%CXX = ${CXX}%
+ }" \
+ -e "/^CFLAGS[ ]*=/{
+ :loop3
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop3
+ s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
+ }" \
+ -e "/^CXXFLAGS[ ]*=/{
+ :loop4
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop4
+ s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
+ }" \
+ -e "s|@config_shell@|${config_shell}|" \
+ -e "s|@srcdir@|${srcdir}|" \
+ -e "s/\f//" \
+ -e "s:@program_transform_name@:${program_transform_name}:" \
+ -e "s|@tooldir@|${tooldir}|" \
+ -e "s|@build_tooldir@|${tooldir}|" \
+ -e "s:@DEFAULT_YACC@:${DEFAULT_YACC}:" \
+ -e "s:@DEFAULT_LEX@:${DEFAULT_LEX}:" \
+ -e "s:@DEFAULT_M4@:${DEFAULT_M4}:" \
+ ./Makefile.tem >> ${Makefile}
+ sed -e "s:@GDB_TK@:${GDB_TK}:" ${Makefile} >${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+
+ # If this is a Canadian Cross, preset the values of many more
+ # tools.
+ if [ "${build}" != "${host}" ]; then
+ for var in ${tools}; do
+ eval val=\$${var}
+ sed -e "/^${var}[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ /\\\\$/ b loop1
+ s/\\\\\\n//g
+ s%^${var}[ ]*=.*$%${var} = ${val}%
+ }" ${Makefile} > ${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+ done
+ fi
+ # If this is NOT a Canadian Cross, preset the values of some more
+ # tools. The above line should get merged into this, but this
+ # substitutes *once* where the above substitutes *globally*; that
+ # needs to be worked out before the merger. The issue is in Makefile
+ # fragment elements (ick, yuck, ugh).
+ if [ "${build}" = "${host}" ]; then
+ for var in ${tools}; do
+ eval val=\$${var}
+ sed -e "s%@${var}@%${val}%" ${Makefile} > ${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+ done
+ fi
- # final copy now in ${Makefile}
+ # final copy now in ${Makefile}
- else
- echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
- fi
+else
+ echo "No Makefile.in found in ${srcdir}/., unable to configure" 1>&2
+fi
- rm -f ${subdir}/Makefile.tem
+rm -f ./Makefile.tem
- case "${host_makefile_frag}" in
- "") using= ;;
- *) using="and \"${host_makefile_frag}\"" ;;
- esac
+case "${host_makefile_frag}" in
+ "") using= ;;
+ *) using="and \"${host_makefile_frag}\"" ;;
+esac
- case "${target_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${target_makefile_frag}\"" ;;
- esac
+case "${target_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${target_makefile_frag}\"" ;;
+esac
- case "${site_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${site_makefile_frag}\"" ;;
- esac
+case "${site_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${site_makefile_frag}\"" ;;
+esac
- newusing=`echo "${using}" | sed 's/and/using/'`
- using=${newusing}
- echo "Created \"${Makefile}\" in" ${PWD=`${PWDCMD-pwd}`} ${using}
+newusing=`echo "${using}" | sed 's/and/using/'`
+using=${newusing}
+echo "Created \"${Makefile}\" in" ${PWD=`${PWDCMD-pwd}`} ${using}
- . ${tmpfile}.pos
+. ${tmpfile}.pos
- # describe the chosen configuration in config.status.
- # Make that file a shellscript which will reestablish
- # the same configuration. Used in Makefiles to rebuild
- # Makefiles.
+# describe the chosen configuration in config.status.
+# Make that file a shellscript which will reestablish
+# the same configuration. Used in Makefiles to rebuild
+# Makefiles.
- case "${norecursion}" in
- "") arguments="${arguments} --norecursion" ;;
- *) ;;
- esac
+case "${norecursion}" in
+ "") arguments="${arguments} --norecursion" ;;
+ *) ;;
+esac
- if [ ${subdir} = . ] ; then
- echo "#!/bin/sh
+echo "#!/bin/sh
# ${NO_EDIT}
# This directory was configured as follows:
${progname}" ${arguments} "
-# ${using}" > ${subdir}/config.new
- else
- echo "#!/bin/sh
-# ${NO_EDIT}
-# This directory was configured as follows:
-cd ${invsubdir}
-${progname}" ${arguments} "
-# ${using}" > ${subdir}/config.new
- fi
- chmod a+x ${subdir}/config.new
- if [ -r ${subdir}/config.back ] ; then
- mv -f ${subdir}/config.back ${subdir}/config.status
- fi
- ${config_shell} ${moveifchange} ${subdir}/config.new ${subdir}/config.status
- ;;
-
- *) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
- esac
-done
+# ${using}" > ./config.new
+chmod a+x ./config.new
+if [ -r ./config.back ] ; then
+ mv -f ./config.back ./config.status
+fi
+${config_shell} ${moveifchange} ./config.new ./config.status
# If there are subdirectories, then recur.
if [ -z "${norecursion}" ] && [ -n "${configdirs}" ] ; then
if [ ! -z "${recprog}" ] ; then
if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${tgt_alias} \
${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
- ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${removing} ${other_options} ${redirect} ; then
+ ${srcdiroption} ${diroptions} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${enableoptions} ${disableoptions} ${floating_pointoption} ${cache_file_option} ${other_options} ${redirect} ; then
true
else
echo Configure in `${PWDCMD-pwd}` failed, exiting. 1>&2
projects / binutils-gdb.git / commitdiff