* gdb.base/a2-run.exp: Change messages to be more explicit about

	the status of args, and quote binfile in results.

diff --git a/gdb/testsuite/gdb.base/a2-run.exp b/gdb/testsuite/gdb.base/a2-run.exp
new file mode 100644 (file)
index 0000000..9f34fdc
--- /dev/null
+++ b/gdb/testsuite/gdb.base/a2-run.exp
@@ -0,0 +1,237 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+# These tests don't work for targets can't take arguments...
+
+if $noargs then {
+       verbose "Skipping a2-run.exp because of noargs."
+       continue
+       }
+
+if $tracelevel then {
+       strace $tracelevel
+       }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set binfile "run"
+
+if ![file exists $objdir/$subdir/$binfile] then {
+    perror "$objdir/$subdir/$binfile does not exist."
+    return 0
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $objdir/$subdir/$binfile
+
+# Run with no arguments.
+# On VxWorks this justs make sure the program was run.
+send "run\n"
+expect -re "run\[\r\n\]+" {}
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    expect {
+       -i $shell_id "Program exited normally" {
+           unresolved "run \"$binfile\" with no args"
+       }
+       -i $shell_id -re "usage:  factorial <number>" {
+           pass "run \"$binfile\" with no args"
+       }
+       timeout {
+           fail "(timeout) run \"$binfile\" with no args"
+       }
+    }
+    set timeout 10
+    expect -re "$prompt $" {}
+} else {
+    expect {
+       -re "Starting program.*usage:  factorial <number>.*Program exited with code 01.*$prompt $" {
+           pass "run \"$binfile\" with no args"
+       }
+       -re ".*$prompt $" {
+           fail "run \"$binfile\" with no args"
+       }
+       timeout {
+           fail "(timeout) run \"$binfile\" no args"
+       }
+    }
+}
+
+# Now run with some arguments
+if [istarget "*-*-vxworks*"] then {
+    send "run vxmain \"5\"\n"
+    expect -re "run vxmain \"5\"\r\n" {}
+    set timeout 120
+    expect {
+       -i $shell_id "Program exited normally" {
+           unresolved "run \"$binfile\" with arg"
+       }
+       -i $shell_id "120" {
+           pass "run \"$binfile\" with arg"
+       }
+       timeout {
+           fail "(timeout) run \"$binfile\" with arg"
+       }
+    }
+    set timeout 10
+    expect -re "$prompt $" {}
+} else {
+       setup_xfail "mips-idt-*"
+       send "run 5\n"
+       expect {
+           -re "Starting program.*$binfile.*120.*$prompt $"\
+                               { pass "run \"$binfile\" with arg" }
+           -re ".*$prompt $"   { fail "run \"$binfile\" with arg" }
+           timeout             { fail "(timeout) run \"$binfile\" with arg" }
+       }
+}
+
+# Run again with same arguments.
+setup_xfail "mips-idt-*"
+send "run\n"
+expect -re "run\[\r\n\]+" {}
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    expect {
+       -i $shell_id "Program exited normally" {
+           unresolved "run \"$binfile\" again with same args"
+       }
+       -i $shell_id "120" { pass "run \"$binfile\" again with same args" }
+       timeout { fail "(timeout) run \"$binfile\" again with same args" }
+    }
+    set timeout 10
+    expect -re "$prompt $" {}
+} else {
+    expect {
+           -re "Starting program.*120.*$prompt $"\
+                               { pass "run \"$binfile\" again with same args" }
+           -re ".*$prompt $"   { fail "run \"$binfile\" again with same args" }
+           timeout             { fail "(timeout) run \"$binfile\" again with same args" }
+       }
+}
+
+# Use "set args" command to specify no arguments as default and run again.
+if [istarget "*-*-vxworks*"] then {
+    send "set args main\n"
+} else {
+    send "set args\n"
+}
+expect -re "$prompt $"
+
+send "run\n"
+expect -re "run\[\r\n\]+" {}
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    expect {
+       -i $shell_id "Program exited normally" {
+           unresolved "run after setting args to nil"
+       }
+       -i $shell_id "usage:  factorial <number>" {
+           pass "run after setting args to nil"
+       }
+       timeout {
+           fail "(timeout) run after setting args to nil"
+       }
+    }
+    set timeout 10
+    expect -re "$prompt $" {}
+} else {
+    expect {
+       -re "Starting program.*usage:  factorial <number>.*$prompt $" {
+           pass "run after setting args to nil"
+       }
+       -re ".*$prompt $" {
+           fail "run after setting args to nil"
+       }
+       timeout {
+           fail "(timeout) run after setting args to nil"
+       }
+    }
+}
+
+# Use "set args" command to specify an argument and run again.
+setup_xfail "mips-idt-*"
+if [istarget "*-*-vxworks*"] then {
+   send "set args vxmain \"6\"\n"
+} else {
+       send "set args 6\n"
+}
+expect -re "$prompt $"
+send "run\n"
+expect -re "run\[\r\n\]+" {}
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    expect {
+       -i $shell_id "Program exited normally" {
+           unresolved "run \"$binfile\" again after setting args"
+       }
+       -i $shell_id "720" {
+           pass "run \"$binfile\" again after setting args"
+       }
+       timeout {
+           fail "(timeout) run \"$binfile\" again after setting args"
+       }
+    }
+    set timeout 10
+    expect -re "$prompt $" {}
+} else {
+    expect {
+           -re "Starting program.*720.*$prompt $" {
+               pass "run \"$binfile\" again after setting args"
+           }
+           -re ".*$prompt $" {
+               fail "run \"$binfile\" again after setting args"
+           }
+           timeout {
+               fail "(timeout) run \"$binfile\" again after setting args"
+           }
+       }
+}
+
+# GOAL: Test that shell is being used with "run".  For remote debugging
+# targets, there is no guarantee that a "shell" (whatever that is) is used.
+if [isnative] then {
+    send "run `echo 8`\n"
+    expect {
+       -re "Starting program.*40320.*$prompt $" {
+           pass "run \"$binfile\" with shell"
+       }
+       -re ".*$prompt $" {
+           fail "run \"$binfile\" with shell"
+       }
+       timeout {
+           fail "(timeout) run \"$binfile\" with shell"
+       }
+    }
+}
+
+# Reset the default arguments for VxWorks
+if [istarget "*-*-vxworks*"] then {
+    send "set args main\n"
+    expect -re ".*$prompt $" {}
+}
+