segT sec;
char * note;
offsetT note_size;
+ offsetT total_size;
offsetT desc_size;
offsetT desc2_offset;
int desc_reloc;
SEC_READONLY | SEC_HAS_CONTENTS | SEC_DATA);
bfd_set_section_alignment (stdoutput, sec, 2);
- /* Create a version note. */
+ /* Work out the size of the notes that we will create,
+ and the relocation we should use. */
if (bfd_arch_bits_per_address (stdoutput) <= 32)
{
note_size = 28;
desc_reloc = BFD_RELOC_64;
}
- frag_now_fix ();
- note = frag_more (note_size);
- memset (note, 0, note_size);
+ /* We have to create a note for *each* code section.
+ Linker garbage collection might discard some. */
+ total_size = 0;
+ note = NULL;
- if (target_big_endian)
- {
- note[3] = 8; /* strlen (name) + 1. */
- note[7] = desc_size; /* Two 8-byte offsets. */
- note[10] = NT_GNU_BUILD_ATTRIBUTE_OPEN >> 8;
- note[11] = NT_GNU_BUILD_ATTRIBUTE_OPEN & 0xff;
- }
- else
- {
- note[0] = 8; /* strlen (name) + 1. */
- note[4] = desc_size; /* Two 8-byte offsets. */
- note[8] = NT_GNU_BUILD_ATTRIBUTE_OPEN & 0xff;
- note[9] = NT_GNU_BUILD_ATTRIBUTE_OPEN >> 8;
- }
-
- /* The a1 version number indicates that this note was
- generated by the assembler and not the gcc annobin plugin. */
- memcpy (note + 12, "GA$\ 13a1", 8);
-
- /* Find the first code section symbol. */
for (sym = symbol_rootP; sym != NULL; sym = sym->sy_next)
if (sym->bsym != NULL
&& sym->bsym->flags & BSF_SECTION_SYM
&& sym->bsym->section != NULL
- && sym->bsym->section->flags & SEC_CODE)
+ /* Skip linkonce sections - we cannot these section symbols as they may disappear. */
+ && (sym->bsym->section->flags & (SEC_CODE | SEC_LINK_ONCE)) == SEC_CODE
+ /* Not all linkonce sections are flagged... */
+ && strncmp (S_GET_NAME (sym), ".gnu.linkonce", sizeof ".gnu.linkonce" - 1) != 0)
{
- /* Found one - now create a relocation against this symbol. */
- create_note_reloc (sec, sym, 20, desc_reloc, 0, note);
- break;
- }
+ /* Create a version note. */
+ frag_now_fix ();
+ note = frag_more (note_size);
+ memset (note, 0, note_size);
- /* Find the last code section symbol. */
- if (sym)
- {
- for (sym = symbol_lastP; sym != NULL; sym = sym->sy_previous)
- if (sym->bsym != NULL
- && sym->bsym->flags & BSF_SECTION_SYM
- && sym->bsym->section != NULL
- && sym->bsym->section->flags & SEC_CODE)
+ if (target_big_endian)
{
- /* Create a relocation against the end of this symbol. */
- create_note_reloc (sec, sym, desc2_offset, desc_reloc,
- bfd_get_section_size (sym->bsym->section),
- note);
- break;
+ note[3] = 8; /* strlen (name) + 1. */
+ note[7] = desc_size; /* Two 8-byte offsets. */
+ note[10] = NT_GNU_BUILD_ATTRIBUTE_OPEN >> 8;
+ note[11] = NT_GNU_BUILD_ATTRIBUTE_OPEN & 0xff;
+ }
+ else
+ {
+ note[0] = 8; /* strlen (name) + 1. */
+ note[4] = desc_size; /* Two 8-byte offsets. */
+ note[8] = NT_GNU_BUILD_ATTRIBUTE_OPEN & 0xff;
+ note[9] = NT_GNU_BUILD_ATTRIBUTE_OPEN >> 8;
}
- }
- /* else - if we were unable to find any code section symbols then
- probably there is no code in the output. So leaving the start
- and end values as zero in the note is OK. */
- /* FIXME: Maybe add a note recording the assembler command line and version ? */
+ /* The a1 version number indicates that this note was
+ generated by the assembler and not the gcc annobin plugin. */
+ memcpy (note + 12, "GA$\ 13a1", 8);
+
+ /* Create a relocation to install the start address of the note... */
+ create_note_reloc (sec, sym, 20, desc_reloc, 0, note);
+
+ /* ...and another one to install the end address. */
+ create_note_reloc (sec, sym, desc2_offset, desc_reloc,
+ bfd_get_section_size (sym->bsym->section),
+ note);
+
+ total_size += note_size;
+ /* FIXME: Maybe add a note recording the assembler command line and version ? */
+ }
/* Install the note(s) into the section. */
- bfd_set_section_contents (stdoutput, sec, (bfd_byte *) note, 0, note_size);
+ if (total_size)
+ bfd_set_section_contents (stdoutput, sec, (bfd_byte *) note, 0, total_size);
subsegs_finish_section (sec);
relax_segment (seg_info (sec)->frchainP->frch_root, sec, 0);
size_seg (stdoutput, sec, NULL);
--- /dev/null
+# Expect script for various ELF based Note tests.
+# Copyright (C) 2018 Free Software Foundation, Inc.
+#
+# This file is part of the GNU Binutils.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+# MA 02110-1301, USA.
+#
+
+# Exclude non-ELF targets.
+
+if ![is_elf_format] {
+ return
+}
+
+set old_ldflags $LDFLAGS
+if { [istarget spu*-*-*] } {
+ set LDFLAGS "$LDFLAGS --local-store 0:0"
+}
+
+if { [is_remote host] } then {
+ remote_download host merge.ld
+}
+
+run_ld_link_tests [list \
+ [list "Linkonce sections with assembler generated notes" \
+ "-r" "" "--generate-missing-build-notes=yes" \
+ {note1_1.s note1_2.s} \
+ {{readelf {--wide --notes} note1.r}} \
+ "note1.so" ] \
+]
projects / binutils-gdb.git / commitdiff