--- /dev/null
+diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile
+--- linux-2.4.31.org/arch/mips/Makefile 2005-01-19 09:09:26.000000000 -0500
++++ linux-2.4.31/arch/mips/Makefile 2005-09-10 17:29:44.000000000 -0400
+@@ -241,6 +241,16 @@
+ endif
+
+ #
++# jp-embedded Q5 board
++#
++ifdef CONFIG_MIPS_Q5
++LIBS += arch/mips/jp-embedded/q5/q5.o \
++ arch/mips/au1000/common/au1000.o
++SUBDIRS += arch/mips/jp-embedded/q5 arch/mips/au1000/common
++LOADADDR := 0x80100000
++endif
++
++#
+ # Au1x00 (AMD/Alchemy) eval boards
+ #
+ ifdef CONFIG_MIPS_DB1000
+diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c
+--- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c 2005-01-19 09:09:26.000000000 -0500
++++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c 2005-09-10 17:47:29.000000000 -0400
+@@ -101,7 +101,7 @@
+
+ void __init pcibios_fixup_irqs(void)
+ {
+-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
++#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 )
+ unsigned int slot;
+ unsigned char pin;
+ struct pci_dev *dev;
+diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in
+--- linux-2.4.31.org/arch/mips/config-shared.in 2005-01-19 09:09:27.000000000 -0500
++++ linux-2.4.31/arch/mips/config-shared.in 2005-08-23 00:30:32.000000000 -0400
+@@ -31,6 +31,7 @@
+ dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
+ dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
++dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32
+ dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
+ dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
+ dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
+@@ -277,6 +278,12 @@
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+ fi
++if [ "$CONFIG_MIPS_Q5" = "y" ]; then
++ define_bool CONFIG_SOC_AU1X00 y
++ define_bool CONFIG_SOC_AU1500 y
++ define_bool CONFIG_NONCOHERENT_IO y
++ define_bool CONFIG_PC_KEYB y
++fi
+ if [ "$CONFIG_MIPS_DB1000" = "y" ]; then
+ define_bool CONFIG_SOC_AU1X00 y
+ define_bool CONFIG_SOC_AU1000 y
+@@ -729,6 +736,7 @@
+ "$CONFIG_MIPS_PB1000" = "y" -o \
+ "$CONFIG_MIPS_PB1100" = "y" -o \
+ "$CONFIG_MIPS_PB1500" = "y" -o \
++ "$CONFIG_MIPS_Q5" = "y" -o \
+ "$CONFIG_NEC_OSPREY" = "y" -o \
+ "$CONFIG_NEC_EAGLE" = "y" -o \
+ "$CONFIG_NINO" = "y" -o \
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile 2005-09-10 16:46:20.000000000 -0400
+@@ -0,0 +1,9 @@
++USE_STANDARD_AS_RULE := true
++
++O_TARGET := q5.o
++
++export-objs = init.o
++
++obj-y := init.o board_setup.o irqmap.o
++
++include $(TOPDIR)/Rules.make
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c 2005-08-30 14:46:21.000000000 -0400
+@@ -0,0 +1,97 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * jp-embedded Q5 board setup.
++ *
++ * Author: jp@jp-embedded.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/ioport.h>
++#include <linux/mm.h>
++#include <linux/console.h>
++#include <linux/mc146818rtc.h>
++#include <linux/delay.h>
++
++#include <asm/cpu.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/keyboard.h>
++#include <asm/mipsregs.h>
++#include <asm/reboot.h>
++#include <asm/pgtable.h>
++#include <asm/au1000.h>
++#include <asm/pb1500.h>
++
++#ifdef CONFIG_USB_OHCI
++// Enable the workaround for the OHCI DoneHead
++// register corruption problem.
++#define CONFIG_AU1000_OHCI_FIX
++#endif
++
++#ifdef CONFIG_RTC
++extern struct rtc_ops pb1500_rtc_ops;
++#endif
++
++void board_reset (void)
++{
++ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */
++ au_writel(0x00000000, 0xAE00001C);
++}
++
++void __init board_setup(void)
++{
++ u32 pin_func;
++ u32 sys_freqctrl, sys_clksrc;
++
++#ifdef CONFIG_PCI
++ // Setup PCI bus controller
++ au_writel(0, Au1500_PCI_CMEM);
++ au_writel(0x00003fff, Au1500_CFG_BASE);
++ au_writel(0xf, Au1500_PCI_CFG);
++ au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
++ au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
++ au_writel(0x02a00356, Au1500_PCI_STATCMD);
++ au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
++ au_writel(0x00000008, Au1500_PCI_MBAR);
++ au_sync();
++#endif
++
++ /* Enable sys bus clock divider when IDLE state or no bus activity. */
++ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
++
++#ifdef CONFIG_RTC
++ rtc_ops = &pb1500_rtc_ops;
++ // Enable the RTC if not already enabled
++ if (!(au_readl(0xac000028) & 0x20)) {
++ printk("enabling clock ...\n");
++ au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
++ }
++ // Put the clock in BCD mode
++ if (readl(0xac00002C) & 0x4) { /* reg B */
++ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
++ au_sync();
++ }
++#endif
++}
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c 2005-09-10 16:43:21.000000000 -0400
+@@ -0,0 +1,80 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * jp-embedded Q5 board setup.
++ *
++ * Author: jp@jp-embedded.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++
++int prom_argc;
++char **prom_argv, **prom_envp;
++extern void __init prom_init_cmdline(void);
++extern char *prom_getenv(char *envname);
++void (*__wbflush) (void);
++
++void au1500_wbflush(void)
++{
++ __asm__ volatile ("sync");
++}
++
++const char *get_system_type(void)
++{
++ return "jp-embedded Q5";
++}
++
++int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
++{
++ unsigned char *memsize_str;
++ unsigned long memsize;
++
++ prom_argc = argc;
++ prom_argv = argv;
++ prom_envp = envp;
++
++ __wbflush = au1500_wbflush;
++
++ /* obs */
++ mips_machgroup = MACH_GROUP_ALCHEMY;
++ mips_machtype = MACH_PB1500;
++
++ prom_init_cmdline();
++ memsize_str = prom_getenv("memsize");
++ if (!memsize_str) {
++ memsize = 0x04000000;
++ } else {
++ memsize = simple_strtol(memsize_str, NULL, 0);
++ }
++ add_memory_region(0, memsize, BOOT_MEM_RAM);
++ return 0;
++}
++
++EXPORT_SYMBOL(__wbflush);
+diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c
+--- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c 1969-12-31 19:00:00.000000000 -0500
++++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c 2005-09-10 16:45:18.000000000 -0400
+@@ -0,0 +1,61 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * jp-embedded Q5 board setup.
++ *
++ * Author: jp@jp-embedded.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/kernel_stat.h>
++#include <linux/module.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/timex.h>
++#include <linux/slab.h>
++#include <linux/random.h>
++#include <linux/delay.h>
++
++#include <asm/bitops.h>
++#include <asm/bootinfo.h>
++#include <asm/io.h>
++#include <asm/mipsregs.h>
++#include <asm/system.h>
++#include <asm/au1000.h>
++
++au1xxx_irq_map_t au1xxx_irq_map[] = {
++ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
++ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
++ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
++ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
++};
++
++int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
++
+--- linux-2.4.31.org/Documentation/Configure.help 2005-04-03 21:42:19.000000000 -0400
++++ linux-2.4.31/Documentation/Configure.help 2005-09-10 18:50:14.340000000 -0400
+@@ -2197,6 +2197,12 @@
+ MIPS-32-based Baget embedded system. This chipset is better known
+ via the NE2100 cards.
+
++jp-embedded Q5 support
++CONFIG_MIPS_Q5
++ This enables support for jp-embedded's MIPS based boards. The
++ boards uses the AU1500 cpu. For more information about these
++ boards, see <http://www.jp-embedded.com/>.
++
+ Support for DECstations
+ CONFIG_DECSTATION
+ This enables support for DEC's MIPS based workstations. For details
--- /dev/null
+diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c
+--- linux-2.4.31.org/drivers/net/au1000_eth.c 2005-01-19 09:09:56.000000000 -0500
++++ linux-2.4.31/drivers/net/au1000_eth.c 2005-08-22 12:24:31.000000000 -0400
+@@ -595,6 +595,97 @@
+ return 0;
+ }
+
++int ns_83847_reset(struct net_device *dev, int phy_addr)
++ {
++ s16 mii_control, timeout;
++
++ // printk("ns_reset\n");
++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
++ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
++ mdelay(1);
++ for (timeout = 100; timeout > 0; --timeout) {
++ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
++ if ((mii_control & MII_CNTL_RESET) == 0)
++ break;
++ mdelay(1);
++ }
++ if (mii_control & MII_CNTL_RESET) {
++ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
++ return -1;
++ }
++ return 0;
++ }
++
++int ns_83847_init(struct net_device *dev, int phy_addr)
++ {
++ s16 data;
++ // printk("ns_init\n");
++
++ /* Stop auto-negotiation */
++ // data = mdio_read(dev, phy_addr, MII_CONTROL);
++ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
++ // mdio_write(dev, phy_addr, 0, 0x0000);
++ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
++
++ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
++ data = mdio_read(dev, phy_addr, MII_ANADV);
++ /* obs PAUSE bit */
++ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
++ mdio_write(dev, phy_addr, MII_ANADV, data);
++
++ /* Bypass led stretching? */
++ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
++ data |= MII_NS_PHYCTRL_BP_STRETCH;
++ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
++
++ /* Restart auto-negotiation */
++ data = mdio_read(dev, phy_addr, MII_CONTROL);
++ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
++ mdio_write(dev, phy_addr, MII_CONTROL, data);
++
++ return 0;
++ }
++
++int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
++ {
++ u16 mii_data;
++ struct au1000_private *aup;
++
++ if (!dev) {
++ printk(KERN_ERR "ns_83847_status error: NULL dev\n");
++ return -1;
++ }
++ aup = (struct au1000_private *) dev->priv;
++
++ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
++ // printk("ns_status: %04x\n", mii_data);
++ if (mii_data & MII_STAT_LINK) {
++ *link = 1;
++ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
++ if (mii_data & MII_NS_PHYSTS_SPEED_10) {
++ *speed = IF_PORT_10BASET;
++ dev->if_port = IF_PORT_10BASET;
++ }
++ else {
++ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
++ *speed = IF_PORT_100BASEFX;
++ dev->if_port = IF_PORT_100BASEFX;
++ }
++ else {
++ *speed = IF_PORT_100BASETX;
++ dev->if_port = IF_PORT_100BASETX;
++ }
++ }
++
++ }
++ else {
++ *link = 0;
++ *speed = 0;
++ dev->if_port = IF_PORT_UNKNOWN;
++ }
++ return 0;
++ }
++
+ #ifdef CONFIG_MIPS_BOSPORUS
+ int stub_init(struct net_device *dev, int phy_addr)
+ {
+@@ -620,6 +711,12 @@
+ }
+ #endif
+
++struct phy_ops ns_83847_ops = {
++ ns_83847_init,
++ ns_83847_reset,
++ ns_83847_status,
++};
++
+ struct phy_ops bcm_5201_ops = {
+ bcm_5201_init,
+ bcm_5201_reset,
+@@ -679,6 +776,7 @@
+ {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
+ {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0},
+ {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0},
++ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
+ #ifdef CONFIG_MIPS_BOSPORUS
+ {"Stub", 0x1234, 0x5678, &stub_ops },
+ #endif
+@@ -872,6 +970,8 @@
+ }
+ }
+ }
++ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
++ return -1;
+ found:
+
+ #ifdef CONFIG_MIPS_BOSPORUS
+diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h
+--- linux-2.4.31.org/drivers/net/au1000_eth.h 2004-02-18 08:36:31.000000000 -0500
++++ linux-2.4.31/drivers/net/au1000_eth.h 2005-08-22 12:31:37.000000000 -0400
+@@ -86,6 +86,27 @@
+ #define MII_STAT_CAN_TX_FDX 0x4000
+ #define MII_STAT_CAN_T4 0x8000
+
++/* mii registers for NS 83847 */
++#define MII_NS_PHYSTS 0x10
++#define MII_NS_FCSCR 0x14
++#define MII_NS_RECR 0x15
++#define MII_NS_PCSR 0x16
++#define MII_NS_PHYCTRL 0x19
++#define MII_NS_10BTSCR 0x1a
++#define MII_NS_CDCTRL 0x1b
++
++/* MII_NS_PHYSTS bits */
++#define MII_NS_PHYSTS_LINK (1)
++#define MII_NS_PHYSTS_SPEED_10 (1<<1)
++#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2)
++
++/* MII_NS_PHYCTRL bits */
++#define MII_NS_PHYCTRL_BP_STRETCH (1<<8)
++
++/* MII_NS_CDCTRL bits */
++#define MII_NS_CDCTRL_CD_ENABLE (1<<15)
++#define MII_NS_CDCTRL_RISETIME (1<<11)
++#define MII_NS_CDCTRL_FALLTIME (1<<9)
+
+ #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
+ #define MII_ID1_MODEL 0x03F0 /* model number */
#
-# Automatically generated by make menuconfig: don't edit
+# Automatically generated make config: don't edit
#
CONFIG_MIPS=y
CONFIG_MIPS32=y
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+CONFIG_MIPS_Q5=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_DDB5074 is not set
# CONFIG_DDB5476 is not set
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_SOC_AU1X00=y
CONFIG_SOC_AU1500=y
-CONFIG_NEW_TIME_C=y
-CONFIG_PCI=y
-CONFIG_NEW_PCI=y
-CONFIG_PCI_AUTO=y
CONFIG_NONCOHERENT_IO=y
CONFIG_PC_KEYB=y
# CONFIG_MIPS_AU1000 is not set
# General setup
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_BUILD_ELF64 is not set
CONFIG_NET=y
-CONFIG_PCI_NAMES=y
+CONFIG_PCI=y
+CONFIG_PCI_NEW=y
+CONFIG_PCI_AUTO=y
+# CONFIG_PCI_NAMES is not set
# CONFIG_ISA is not set
# CONFIG_TC is not set
# CONFIG_MCA is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_BINFMT_ELF32 is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_OOM_KILLER is not set
+# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
#
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=18000000
-CONFIG_MTD_PHYSMAP_LEN=2000000
+CONFIG_MTD_PHYSMAP_START=0x18000000
+CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_PB1000 is not set
# CONFIG_MTD_PB1500 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_VLAN_8021Q=y
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
#
-# Appletalk devices
+#
#
-# CONFIG_DEV_APPLETALK is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
# CONFIG_X25 is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_DELAY is not set
+# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
+
+#
+# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
+#
+CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-# CONFIG_MIPS_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
projects / buildroot.git / commitdiff