static const struct attribute_spec nds32_attribute_table[] =
{
/* Syntax: { name, min_len, max_len, decl_required, type_required,
- function_type_required, handler, affects_type_identity } */
+ function_type_required, handler, affects_type_identity } */
/* The interrupt vid: [0-63]+ (actual vector number starts from 9 to 72). */
{ "interrupt", 1, 64, false, false, false, NULL, false },
if (cfun->machine->va_args_size != 0)
{
cfun->machine->va_args_first_regno
- = NDS32_GPR_ARG_FIRST_REGNUM
- + NDS32_MAX_GPR_REGS_FOR_ARGS
- - (crtl->args.pretend_args_size / UNITS_PER_WORD);
+ = NDS32_GPR_ARG_FIRST_REGNUM
+ + NDS32_MAX_GPR_REGS_FOR_ARGS
+ - (crtl->args.pretend_args_size / UNITS_PER_WORD);
cfun->machine->va_args_last_regno
- = NDS32_GPR_ARG_FIRST_REGNUM + NDS32_MAX_GPR_REGS_FOR_ARGS - 1;
+ = NDS32_GPR_ARG_FIRST_REGNUM + NDS32_MAX_GPR_REGS_FOR_ARGS - 1;
}
else
{
Or, if all the following conditions succeed,
we can set this function 'naked_p' as well:
condition 1: first_regno == last_regno == SP_REGNUM,
- which means we do not have to save
- any callee-saved registers.
+ which means we do not have to save
+ any callee-saved registers.
condition 2: Both $lp and $fp are NOT live in this function,
- which means we do not need to save them and there
- is no outgoing size.
+ which means we do not need to save them and there
+ is no outgoing size.
condition 3: There is no local_size, which means
- we do not need to adjust $sp. */
+ we do not need to adjust $sp. */
if (lookup_attribute ("naked", DECL_ATTRIBUTES (current_function_decl))
|| (cfun->machine->callee_saved_first_gpr_regno == SP_REGNUM
&& cfun->machine->callee_saved_last_gpr_regno == SP_REGNUM
&& cfun->machine->local_size == 0))
{
/* Set this function 'naked_p' and other functions can check this flag.
- Note that in nds32 port, the 'naked_p = 1' JUST means there is no
- callee-saved, local size, and outgoing size.
- The varargs space and ret instruction may still present in
- the prologue/epilogue expanding. */
+ Note that in nds32 port, the 'naked_p = 1' JUST means there is no
+ callee-saved, local size, and outgoing size.
+ The varargs space and ret instruction may still present in
+ the prologue/epilogue expanding. */
cfun->machine->naked_p = 1;
/* No need to save $fp, $gp, and $lp.
- We should set these value to be zero
- so that nds32_initial_elimination_offset() can work properly. */
+ We should set these value to be zero
+ so that nds32_initial_elimination_offset() can work properly. */
cfun->machine->fp_size = 0;
cfun->machine->gp_size = 0;
cfun->machine->lp_size = 0;
/* If stack usage computation is required,
- we need to provide the static stack size. */
+ we need to provide the static stack size. */
if (flag_stack_usage_info)
current_function_static_stack_size = 0;
&& (cfun->machine->va_args_size == 0))
{
/* Recompute:
- cfun->machine->fp_size
- cfun->machine->gp_size
- cfun->machine->lp_size
- cfun->machine->callee_saved_regs_first_regno
- cfun->machine->callee_saved_regs_last_regno */
+ cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
+ cfun->machine->callee_saved_first_gpr_regno
+ cfun->machine->callee_saved_last_gpr_regno */
/* For v3push instructions, $fp, $gp, and $lp are always saved. */
cfun->machine->fp_size = 4;
}
}
- /* We have correctly set callee_saved_regs_first_regno
- and callee_saved_regs_last_regno.
- Initially, the callee_saved_regs_size is supposed to be 0.
- As long as callee_saved_regs_last_regno is not SP_REGNUM,
- we can update callee_saved_regs_size with new size. */
+ /* We have correctly set callee_saved_first_gpr_regno
+ and callee_saved_last_gpr_regno.
+ Initially, the callee_saved_gpr_regs_size is supposed to be 0.
+ As long as callee_saved_last_gpr_regno is not SP_REGNUM,
+ we can update callee_saved_gpr_regs_size with new size. */
if (cfun->machine->callee_saved_last_gpr_regno != SP_REGNUM)
{
/* Compute pushed size of callee-saved registers. */
}
/* Important: We need to make sure that
- (fp_size + gp_size + lp_size + callee_saved_regs_size)
- is 8-byte alignment.
- If it is not, calculate the padding bytes. */
+ (fp_size + gp_size + lp_size + callee_saved_gpr_regs_size)
+ is 8-byte alignment.
+ If it is not, calculate the padding bytes. */
block_size = cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
necessary information for data analysis,
so we create a parallel rtx like this:
(parallel [(set (mem (plus (reg:SI SP_REGNUM) (const_int -32)))
- (reg:SI Rb))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -28)))
- (reg:SI Rb+1))
- ...
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -16)))
- (reg:SI Re))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -12)))
- (reg:SI FP_REGNUM))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -8)))
- (reg:SI GP_REGNUM))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -4)))
- (reg:SI LP_REGNUM))
- (set (reg:SI SP_REGNUM)
- (plus (reg:SI SP_REGNUM) (const_int -32)))]) */
+ (reg:SI Rb))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -28)))
+ (reg:SI Rb+1))
+ ...
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -16)))
+ (reg:SI Re))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -12)))
+ (reg:SI FP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -8)))
+ (reg:SI GP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -4)))
+ (reg:SI LP_REGNUM))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int -32)))]) */
/* Determine whether we need to save $fp, $gp, or $lp. */
save_fp = INTVAL (En4) & 0x8;
for (regno = REGNO (Rb); regno <= (int) REGNO (Re); regno++)
{
/* Rb and Re may be SP_REGNUM.
- We need to break this loop immediately. */
+ We need to break this loop immediately. */
if (regno == SP_REGNUM)
break;
necessary information for data analysis,
so we create a parallel rtx like this:
(parallel [(set (reg:SI Rb)
- (mem (reg:SI SP_REGNUM)))
- (set (reg:SI Rb+1)
- (mem (plus (reg:SI SP_REGNUM) (const_int 4))))
- ...
- (set (reg:SI Re)
- (mem (plus (reg:SI SP_REGNUM) (const_int 16))))
- (set (reg:SI FP_REGNUM)
- (mem (plus (reg:SI SP_REGNUM) (const_int 20))))
- (set (reg:SI GP_REGNUM)
- (mem (plus (reg:SI SP_REGNUM) (const_int 24))))
- (set (reg:SI LP_REGNUM)
- (mem (plus (reg:SI SP_REGNUM) (const_int 28))))
- (set (reg:SI SP_REGNUM)
- (plus (reg:SI SP_REGNUM) (const_int 32)))]) */
+ (mem (reg:SI SP_REGNUM)))
+ (set (reg:SI Rb+1)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 4))))
+ ...
+ (set (reg:SI Re)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 16))))
+ (set (reg:SI FP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 20))))
+ (set (reg:SI GP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 24))))
+ (set (reg:SI LP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 28))))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int 32)))]) */
/* Determine whether we need to restore $fp, $gp, or $lp. */
save_fp = INTVAL (En4) & 0x8;
for (regno = REGNO (Rb); regno <= (int) REGNO (Re); regno++)
{
/* Rb and Re may be SP_REGNUM.
- We need to break this loop immediately. */
+ We need to break this loop immediately. */
if (regno == SP_REGNUM)
break;
necessary information for data analysis,
so we create a parallel rtx like this:
(parallel [(set (mem (plus (reg:SI SP_REGNUM) (const_int -32)))
- (reg:SI Rb))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -28)))
- (reg:SI Rb+1))
- ...
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -16)))
- (reg:SI Re))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -12)))
- (reg:SI FP_REGNUM))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -8)))
- (reg:SI GP_REGNUM))
- (set (mem (plus (reg:SI SP_REGNUM) (const_int -4)))
- (reg:SI LP_REGNUM))
- (set (reg:SI SP_REGNUM)
- (plus (reg:SI SP_REGNUM) (const_int -32-imm8u)))]) */
+ (reg:SI Rb))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -28)))
+ (reg:SI Rb+1))
+ ...
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -16)))
+ (reg:SI Re))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -12)))
+ (reg:SI FP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -8)))
+ (reg:SI GP_REGNUM))
+ (set (mem (plus (reg:SI SP_REGNUM) (const_int -4)))
+ (reg:SI LP_REGNUM))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int -32-imm8u)))]) */
/* Calculate the number of registers that will be pushed.
Since $fp, $gp, and $lp is always pushed with v3push instruction,
necessary information for data analysis,
so we create a parallel rtx like this:
(parallel [(set (reg:SI Rb)
- (mem (reg:SI SP_REGNUM)))
- (set (reg:SI Rb+1)
- (mem (plus (reg:SI SP_REGNUM) (const_int 4))))
- ...
- (set (reg:SI Re)
- (mem (plus (reg:SI SP_REGNUM) (const_int 16))))
- (set (reg:SI FP_REGNUM)
- (mem (plus (reg:SI SP_REGNUM) (const_int 20))))
- (set (reg:SI GP_REGNUM)
- (mem (plus (reg:SI SP_REGNUM) (const_int 24))))
- (set (reg:SI LP_REGNUM)
- (mem (plus (reg:SI SP_REGNUM) (const_int 28))))
- (set (reg:SI SP_REGNUM)
- (plus (reg:SI SP_REGNUM) (const_int 32+imm8u)))]) */
+ (mem (reg:SI SP_REGNUM)))
+ (set (reg:SI Rb+1)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 4))))
+ ...
+ (set (reg:SI Re)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 16))))
+ (set (reg:SI FP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 20))))
+ (set (reg:SI GP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 24))))
+ (set (reg:SI LP_REGNUM)
+ (mem (plus (reg:SI SP_REGNUM) (const_int 28))))
+ (set (reg:SI SP_REGNUM)
+ (plus (reg:SI SP_REGNUM) (const_int 32+imm8u)))]) */
/* Calculate the number of registers that will be poped.
Since $fp, $gp, and $lp is always poped with v3pop instruction,
if (!satisfies_constraint_Is15 (GEN_INT (full_value)))
{
/* The value is not able to fit in single addi instruction.
- Create more instructions of moving value into a register
- and then add stack pointer with it. */
+ Create more instructions of moving value into a register
+ and then add stack pointer with it. */
/* $r15 is going to be temporary register to hold the value. */
tmp_reg = gen_rtx_REG (SImode, TA_REGNUM);
/* Create one more instruction to move value
- into the temporary register. */
+ into the temporary register. */
emit_move_insn (tmp_reg, GEN_INT (full_value));
/* Create new 'add' rtx. */
STRICT : true
=> We are in reload pass or after reload pass.
- The register number should be strictly limited in general registers.
+ The register number should be strictly limited in general registers.
STRICT : false
=> Before reload pass, we are free to use any register number. */
/* Function that check if 'INDEX' is valid to be a index rtx for address.
OUTER_MODE : Machine mode of outer address rtx.
- INDEX : Check if this rtx is valid to be a index for address.
+ INDEX : Check if this rtx is valid to be a index for address.
STRICT : If it is true, we are in reload pass or after reload pass. */
static bool
nds32_legitimate_index_p (machine_mode outer_mode,
case REG:
regno = REGNO (index);
/* If we are in reload pass or after reload pass,
- we need to limit it to general register. */
+ we need to limit it to general register. */
if (strict)
return REGNO_OK_FOR_INDEX_P (regno);
else
2. return address
3. callee-saved registers
4. <padding bytes> (we will calculte in nds32_compute_stack_frame()
- and save it at
- cfun->machine->callee_saved_area_padding_bytes)
+ and save it at
+ cfun->machine->callee_saved_area_padding_bytes)
[Block B]
1. local variables
By applying the basic frame/stack/argument pointers concept,
the layout of a stack frame shoule be like this:
- | |
+ | |
old stack pointer -> ----
- | | \
- | | saved arguments for
- | | vararg functions
- | | /
+ | | \
+ | | saved arguments for
+ | | vararg functions
+ | | /
hard frame pointer -> --
& argument pointer | | \
- | | previous hardware frame pointer
- | | return address
- | | callee-saved registers
- | | /
- frame pointer -> --
- | | \
- | | local variables
- | | and incoming arguments
- | | /
- --
- | | \
- | | outgoing
- | | arguments
- | | /
- stack pointer -> ----
+ | | previous hardware frame pointer
+ | | return address
+ | | callee-saved registers
+ | | /
+ frame pointer -> --
+ | | \
+ | | local variables
+ | | and incoming arguments
+ | | /
+ --
+ | | \
+ | | outgoing
+ | | arguments
+ | | /
+ stack pointer -> ----
$SFP and $AP are used to represent frame pointer and arguments pointer,
which will be both eliminated as hard frame pointer. */
if (!named)
{
/* If we are under hard float abi, we have arguments passed on the
- stack and all situation can be handled by GCC itself. */
+ stack and all situation can be handled by GCC itself. */
if (TARGET_HARD_FLOAT)
return NULL_RTX;
}
/* No register available, return NULL_RTX.
- The compiler will use stack to pass argument instead. */
+ The compiler will use stack to pass argument instead. */
return NULL_RTX;
}
else
{
/* For !TARGET_HARD_FLOAT calling convention, we always use GPR to pass
- argument. Since we allow to pass argument partially in registers,
- we can just return it if there are still registers available. */
+ argument. Since we allow to pass argument partially in registers,
+ we can just return it if there are still registers available. */
if (NDS32_ARG_PARTIAL_IN_GPR_REG_P (cum->gpr_offset, mode, type))
{
/* Pick up the next available register number. */
remaining_reg_count
= NDS32_MAX_GPR_REGS_FOR_ARGS
- (NDS32_AVAILABLE_REGNUM_FOR_GPR_ARG (cum->gpr_offset, mode, type)
- - NDS32_GPR_ARG_FIRST_REGNUM);
+ - NDS32_GPR_ARG_FIRST_REGNUM);
/* Note that we have to return the nubmer of bytes, not registers count. */
if (needed_reg_count > remaining_reg_count)
else
{
/* If this nameless argument is NOT under TARGET_HARD_FLOAT,
- we can advance next register as well so that caller is
- able to pass arguments in registers and callee must be
- in charge of pushing all of them into stack. */
+ we can advance next register as well so that caller is
+ able to pass arguments in registers and callee must be
+ in charge of pushing all of them into stack. */
if (!TARGET_HARD_FLOAT)
{
cum->gpr_offset
static bool
nds32_warn_func_return (tree decl)
{
-/* Naked functions are implemented entirely in assembly, including the
- return sequence, so suppress warnings about this. */
+ /* Naked functions are implemented entirely in assembly, including the
+ return sequence, so suppress warnings about this. */
return !nds32_naked_function_p (decl);
}
sorry ("a nested function is not supported for reduced registers");
/* STEP 1: Copy trampoline code template into stack,
- fill up essential data into stack. */
+ fill up essential data into stack. */
/* Extract nested function address rtx. */
fnaddr = XEXP (DECL_RTL (fndecl), 0);
&& (tramp_align_in_bytes % nds32_cache_block_size) == 0)
{
/* Under this condition, the starting address of trampoline
- must be aligned to the starting address of each cache block
- and we do not have to worry about cross-boundary issue. */
+ must be aligned to the starting address of each cache block
+ and we do not have to worry about cross-boundary issue. */
for (i = 0;
i < (TRAMPOLINE_SIZE + nds32_cache_block_size - 1)
/ nds32_cache_block_size;
else if (TRAMPOLINE_SIZE > nds32_cache_block_size)
{
/* The starting address of trampoline code
- may not be aligned to the cache block,
- so the trampoline code may be across two cache block.
- We need to sync the last element, which is 4-byte size,
- of trampoline template. */
+ may not be aligned to the cache block,
+ so the trampoline code may be across two cache block.
+ We need to sync the last element, which is 4-byte size,
+ of trampoline template. */
for (i = 0;
i < (TRAMPOLINE_SIZE + nds32_cache_block_size - 1)
/ nds32_cache_block_size;
else
{
/* This is the simplest case.
- Because TRAMPOLINE_SIZE is less than or
- equal to nds32_cache_block_size,
- we can just sync start address and
- the last element of trampoline code. */
+ Because TRAMPOLINE_SIZE is less than or
+ equal to nds32_cache_block_size,
+ we can just sync start address and
+ the last element of trampoline code. */
/* Sync starting address of tampoline code. */
emit_move_insn (tmp_reg, sync_cache_addr);
emit_insn (isync_insn);
/* Sync the last element, which is 4-byte size,
- of trampoline template. */
+ of trampoline template. */
emit_move_insn (tmp_reg,
plus_constant (Pmode, sync_cache_addr,
TRAMPOLINE_SIZE - 4));
{
/* For (mem:DI addr) or (mem:DF addr) case,
we only allow 'addr' to be [reg], [symbol_ref],
- [const], or [reg + const_int] pattern. */
+ [const], or [reg + const_int] pattern. */
if (mode == DImode || mode == DFmode)
{
/* Allow [Reg + const_int] addressing mode. */
&& nds32_legitimate_index_p (mode, XEXP (x, 1), strict)
&& CONST_INT_P (XEXP (x, 1)))
return true;
-
else if (nds32_address_register_rtx_p (XEXP (x, 1), strict)
&& nds32_legitimate_index_p (mode, XEXP (x, 0), strict)
&& CONST_INT_P (XEXP (x, 0)))
case SYMBOL_REF:
/* (mem (symbol_ref A)) => [symbol_ref] */
/* If -mcmodel=large, the 'symbol_ref' is not a valid address
- during or after LRA/reload phase. */
+ during or after LRA/reload phase. */
if (TARGET_CMODEL_LARGE
&& (reload_completed
|| reload_in_progress
|| lra_in_progress))
return false;
/* If -mcmodel=medium and the symbol references to rodata section,
- the 'symbol_ref' is not a valid address during or after
- LRA/reload phase. */
+ the 'symbol_ref' is not a valid address during or after
+ LRA/reload phase. */
if (TARGET_CMODEL_MEDIUM
&& NDS32_SYMBOL_REF_RODATA_P (x)
&& (reload_completed
case CONST:
/* (mem (const (...)))
- => [ + const_addr ], where const_addr = symbol_ref + const_int */
+ => [ + const_addr ], where const_addr = symbol_ref + const_int */
if (GET_CODE (XEXP (x, 0)) == PLUS)
{
rtx plus_op = XEXP (x, 0);
if (GET_CODE (op0) == SYMBOL_REF && CONST_INT_P (op1))
{
/* Now we see the [ + const_addr ] pattern, but we need
- some further checking. */
+ some further checking. */
/* If -mcmodel=large, the 'const_addr' is not a valid address
- during or after LRA/reload phase. */
+ during or after LRA/reload phase. */
if (TARGET_CMODEL_LARGE
&& (reload_completed
|| reload_in_progress
|| lra_in_progress))
return false;
/* If -mcmodel=medium and the symbol references to rodata section,
- the 'const_addr' is not a valid address during or after
- LRA/reload phase. */
+ the 'const_addr' is not a valid address during or after
+ LRA/reload phase. */
if (TARGET_CMODEL_MEDIUM
&& NDS32_SYMBOL_REF_RODATA_P (op0)
&& (reload_completed
case POST_MODIFY:
/* (mem (post_modify (reg) (plus (reg) (reg))))
- => [Ra], Rb */
+ => [Ra], Rb */
/* (mem (post_modify (reg) (plus (reg) (const_int))))
- => [Ra], const_int */
+ => [Ra], const_int */
if (GET_CODE (XEXP (x, 0)) == REG
&& GET_CODE (XEXP (x, 1)) == PLUS)
{
/* (mem (post_inc reg)) => [Ra], 1/2/4 */
/* (mem (post_dec reg)) => [Ra], -1/-2/-4 */
/* The 1/2/4 or -1/-2/-4 have been displayed in nds32.md.
- We only need to deal with register Ra. */
+ We only need to deal with register Ra. */
if (nds32_address_register_rtx_p (XEXP (x, 0), strict))
return true;
else
case PLUS:
/* (mem (plus reg const_int))
- => [Ra + imm] */
+ => [Ra + imm] */
/* (mem (plus reg reg))
- => [Ra + Rb] */
+ => [Ra + Rb] */
/* (mem (plus (mult reg const_int) reg))
- => [Ra + Rb << sv] */
+ => [Ra + Rb << sv] */
if (nds32_address_register_rtx_p (XEXP (x, 0), strict)
&& nds32_legitimate_index_p (mode, XEXP (x, 1), strict))
return true;
op_value = INTVAL (x);
/* According to the Andes architecture,
- the system/user register index range is 0 ~ 1023.
- In order to avoid conflict between user-specified-integer value
- and enum-specified-register value,
- the 'enum nds32_intrinsic_registers' value
- in nds32_intrinsic.h starts from 1024. */
+ the system/user register index range is 0 ~ 1023.
+ In order to avoid conflict between user-specified-integer value
+ and enum-specified-register value,
+ the 'enum nds32_intrinsic_registers' value
+ in nds32_intrinsic.h starts from 1024. */
if (op_value < 1024 && op_value >= 0)
{
/* If user gives integer value directly (0~1023),
case REG:
/* Forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REGNO (x) == STATIC_CHAIN_REGNUM)
sorry ("a nested function is not supported for reduced registers");
default:
/* Generally, output_addr_const () is able to handle most cases.
- We want to see what CODE could appear,
- so we use gcc_unreachable() to stop it. */
+ We want to see what CODE could appear,
+ so we use gcc_unreachable() to stop it. */
debug_rtx (x);
gcc_unreachable ();
break;
case REG:
/* Forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REGNO (x) == STATIC_CHAIN_REGNUM)
sorry ("a nested function is not supported for reduced registers");
op1 = XEXP (x, 1);
/* Checking op0, forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REG_P (op0)
&& REGNO (op0) == STATIC_CHAIN_REGNUM)
sorry ("a nested function is not supported for reduced registers");
/* Checking op1, forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REG_P (op1)
&& REGNO (op1) == STATIC_CHAIN_REGNUM)
/* [Ra + Rb << sv]
From observation, the pattern looks like:
(plus:SI (mult:SI (reg:SI 58)
- (const_int 4 [0x4]))
- (reg/f:SI 57)) */
+ (const_int 4 [0x4]))
+ (reg/f:SI 57)) */
int sv;
/* We need to set sv to output shift value. */
case POST_MODIFY:
/* (post_modify (regA) (plus (regA) (regB)))
- (post_modify (regA) (plus (regA) (const_int)))
- We would like to extract
- regA and regB (or const_int) from plus rtx. */
+ (post_modify (regA) (plus (regA) (const_int)))
+ We would like to extract
+ regA and regB (or const_int) from plus rtx. */
op0 = XEXP (XEXP (x, 1), 0);
op1 = XEXP (XEXP (x, 1), 1);
/* Checking op0, forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REG_P (op0)
&& REGNO (op0) == STATIC_CHAIN_REGNUM)
sorry ("a nested function is not supported for reduced registers");
/* Checking op1, forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REG_P (op1)
&& REGNO (op1) == STATIC_CHAIN_REGNUM)
op0 = XEXP (x, 0);
/* Checking op0, forbid using static chain register ($r16)
- on reduced-set registers configuration. */
+ on reduced-set registers configuration. */
if (TARGET_REDUCED_REGS
&& REG_P (op0)
&& REGNO (op0) == STATIC_CHAIN_REGNUM)
default :
/* Generally, output_addr_const () is able to handle most cases.
- We want to see what CODE could appear,
- so we use gcc_unreachable() to stop it. */
+ We want to see what CODE could appear,
+ so we use gcc_unreachable() to stop it. */
debug_rtx (x);
gcc_unreachable ();
break;
nds32_check_isr_attrs_conflict (decl, func_attrs);
/* Now we are starting to check valid id value
- for interrupt/exception/reset.
- Note that we ONLY check its validity here.
- To construct isr vector information, it is still performed
- by nds32_construct_isr_vectors_information(). */
+ for interrupt/exception/reset.
+ Note that we ONLY check its validity here.
+ To construct isr vector information, it is still performed
+ by nds32_construct_isr_vectors_information(). */
intr = lookup_attribute ("interrupt", func_attrs);
excp = lookup_attribute ("exception", func_attrs);
reset = lookup_attribute ("reset", func_attrs);
int r;
/* Prevent register allocator from
- choosing it as doing register allocation. */
+ choosing it as doing register allocation. */
for (r = 11; r <= 14; r++)
fixed_regs[r] = call_used_regs[r] = 1;
for (r = 16; r <= 27; r++)
nds32_compute_stack_frame ();
/* Remember to consider
- cfun->machine->callee_saved_area_padding_bytes
+ cfun->machine->callee_saved_area_gpr_padding_bytes
when calculating offset. */
if (from_reg == ARG_POINTER_REGNUM && to_reg == STACK_POINTER_REGNUM)
{
offset = (cfun->machine->fp_size
- + cfun->machine->gp_size
+ + cfun->machine->gp_size
+ cfun->machine->lp_size
+ cfun->machine->callee_saved_gpr_regs_size
+ cfun->machine->callee_saved_area_gpr_padding_bytes
if (frame_pointer_needed)
{
/* adjust $fp = $sp + ($fp size) + ($gp size) + ($lp size)
- + (4 * callee-saved-registers)
- Note: No need to adjust
- cfun->machine->callee_saved_area_padding_bytes,
- because, at this point, stack pointer is just
- at the position after push instruction. */
+ + (4 * callee-saved-registers)
+ Note: No need to adjust
+ cfun->machine->callee_saved_area_gpr_padding_bytes,
+ because, at this point, stack pointer is just
+ at the position after push instruction. */
fp_adjust = cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
}
/* Adjust $sp = $sp - local_size - out_args_size
- - callee_saved_area_padding_bytes. */
+ - callee_saved_area_gpr_padding_bytes. */
sp_adjust = cfun->machine->local_size
+ cfun->machine->out_args_size
+ cfun->machine->callee_saved_area_gpr_padding_bytes;
if (cfun->machine->naked_p)
{
/* If this is a variadic function, we do not have to restore argument
- registers but need to adjust stack pointer back to previous stack
- frame location before return. */
+ registers but need to adjust stack pointer back to previous stack
+ frame location before return. */
if (cfun->machine->va_args_size != 0)
{
/* Generate sp adjustment instruction.
}
/* Generate return instruction by using 'return_internal' pattern.
- Make sure this instruction is after gen_blockage(). */
+ Make sure this instruction is after gen_blockage(). */
if (!sibcall_p)
emit_jump_insn (gen_return_internal ());
return;
if (frame_pointer_needed)
{
/* adjust $sp = $fp - ($fp size) - ($gp size) - ($lp size)
- - (4 * callee-saved-registers)
- Note: No need to adjust
- cfun->machine->callee_saved_area_padding_bytes,
- because we want to adjust stack pointer
- to the position for pop instruction. */
+ - (4 * callee-saved-registers)
+ Note: No need to adjust
+ cfun->machine->callee_saved_area_gpr_padding_bytes,
+ because we want to adjust stack pointer
+ to the position for pop instruction. */
sp_adjust = cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
else
{
/* If frame pointer is NOT needed,
- we cannot calculate the sp adjustment from frame pointer.
- Instead, we calculate the adjustment by local_size,
- out_args_size, and callee_saved_area_padding_bytes.
- Notice that such sp adjustment value may be out of range,
- so we have to deal with it as well. */
+ we cannot calculate the sp adjustment from frame pointer.
+ Instead, we calculate the adjustment by local_size,
+ out_args_size, and callee_saved_area_padding_bytes.
+ Notice that such sp adjustment value may be out of range,
+ so we have to deal with it as well. */
/* Adjust $sp = $sp + local_size + out_args_size
- + callee_saved_area_padding_bytes. */
+ + callee_saved_area_padding_bytes. */
sp_adjust = cfun->machine->local_size
+ cfun->machine->out_args_size
+ cfun->machine->callee_saved_area_gpr_padding_bytes;
/* sp_adjust value may be out of range of the addi instruction,
- create alternative add behavior with TA_REGNUM if necessary,
- using POSITIVE value to tell that we are increasing address. */
+ create alternative add behavior with TA_REGNUM if necessary,
+ using POSITIVE value to tell that we are increasing address. */
sp_adjust = nds32_force_addi_stack_int (sp_adjust);
if (sp_adjust)
{
if (cfun->machine->va_args_size != 0)
{
/* Generate sp adjustment instruction.
- We need to consider padding bytes here. */
+ We need to consider padding bytes here. */
sp_adjust = cfun->machine->va_args_size
+ cfun->machine->va_args_area_padding_bytes;
sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
sp_adjust_insn = emit_insn (sp_adjust_insn);
/* The insn rtx 'sp_adjust_insn' will change frame layout.
- We need to use RTX_FRAME_RELATED_P so that GCC is able to
- generate CFI (Call Frame Information) stuff. */
+ We need to use RTX_FRAME_RELATED_P so that GCC is able to
+ generate CFI (Call Frame Information) stuff. */
RTX_FRAME_RELATED_P (sp_adjust_insn) = 1;
}
/* We can use 'push25 Re,imm8u'. */
/* nds32_emit_stack_v3push(last_regno, sp_adjust),
- the pattern 'stack_v3push' is implemented in nds32.md.
+ the pattern 'stack_v3push' is implemented in nds32.md.
The (const_int 14) means v3push always push { $fp $gp $lp }. */
nds32_emit_stack_v3push (Rb, Re,
GEN_INT (14), GEN_INT (sp_adjust));
/* Check frame_pointer_needed to see
- if we shall emit fp adjustment instruction. */
+ if we shall emit fp adjustment instruction. */
if (frame_pointer_needed)
{
/* adjust $fp = $sp + 4 ($fp size)
- + 4 ($gp size)
- + 4 ($lp size)
- + (4 * n) (callee-saved registers)
- + sp_adjust ('push25 Re,imm8u')
+ + 4 ($gp size)
+ + 4 ($lp size)
+ + (4 * n) (callee-saved registers)
+ + sp_adjust ('push25 Re,imm8u')
Note: Since we use 'push25 Re,imm8u',
- the position of stack pointer is further
- changed after push instruction.
- Hence, we need to take sp_adjust value
- into consideration. */
+ the position of stack pointer is further
+ changed after push instruction.
+ Hence, we need to take sp_adjust value
+ into consideration. */
fp_adjust = cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
else
{
/* We have to use 'push25 Re,0' and
- expand one more instruction to adjust $sp later. */
+ expand one more instruction to adjust $sp later. */
/* nds32_emit_stack_v3push(last_regno, sp_adjust),
- the pattern 'stack_v3push' is implemented in nds32.md.
- The (const_int 14) means v3push always push { $fp $gp $lp }. */
+ the pattern 'stack_v3push' is implemented in nds32.md.
+ The (const_int 14) means v3push always push { $fp $gp $lp }. */
nds32_emit_stack_v3push (Rb, Re,
GEN_INT (14), GEN_INT (0));
/* Check frame_pointer_needed to see
- if we shall emit fp adjustment instruction. */
+ if we shall emit fp adjustment instruction. */
if (frame_pointer_needed)
{
/* adjust $fp = $sp + 4 ($fp size)
- + 4 ($gp size)
- + 4 ($lp size)
- + (4 * n) (callee-saved registers)
+ + 4 ($gp size)
+ + 4 ($lp size)
+ + (4 * n) (callee-saved registers)
Note: Since we use 'push25 Re,0',
- the stack pointer is just at the position
- after push instruction.
- No need to take sp_adjust into consideration. */
+ the stack pointer is just at the position
+ after push instruction.
+ No need to take sp_adjust into consideration. */
fp_adjust = cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
}
/* Because we use 'push25 Re,0',
- we need to expand one more instruction to adjust $sp.
- However, sp_adjust value may be out of range of the addi instruction,
- create alternative add behavior with TA_REGNUM if necessary,
- using NEGATIVE value to tell that we are decreasing address. */
+ we need to expand one more instruction to adjust $sp.
+ However, sp_adjust value may be out of range of the addi instruction,
+ create alternative add behavior with TA_REGNUM if necessary,
+ using NEGATIVE value to tell that we are decreasing address. */
sp_adjust = nds32_force_addi_stack_int ( (-1) * sp_adjust);
if (sp_adjust)
{
if (cfun->machine->naked_p)
{
/* Generate return instruction by using 'return_internal' pattern.
- Make sure this instruction is after gen_blockage(). */
+ Make sure this instruction is after gen_blockage(). */
if (!sibcall_p)
emit_jump_insn (gen_return_internal ());
return;
/* We can use 'pop25 Re,imm8u'. */
/* nds32_emit_stack_v3pop(last_regno, sp_adjust),
- the pattern 'stack_v3pop' is implementad in nds32.md.
+ the pattern 'stack_v3pop' is implementad in nds32.md.
The (const_int 14) means v3pop always pop { $fp $gp $lp }. */
nds32_emit_stack_v3pop (Rb, Re,
GEN_INT (14), GEN_INT (sp_adjust));
else
{
/* We have to use 'pop25 Re,0', and prior to it,
- we must expand one more instruction to adjust $sp. */
+ we must expand one more instruction to adjust $sp. */
if (frame_pointer_needed)
{
/* adjust $sp = $fp - 4 ($fp size)
- - 4 ($gp size)
- - 4 ($lp size)
- - (4 * n) (callee-saved registers)
+ - 4 ($gp size)
+ - 4 ($lp size)
+ - (4 * n) (callee-saved registers)
Note: No need to adjust
- cfun->machine->callee_saved_area_padding_bytes,
- because we want to adjust stack pointer
- to the position for pop instruction. */
+ cfun->machine->callee_saved_area_gpr_padding_bytes,
+ because we want to adjust stack pointer
+ to the position for pop instruction. */
sp_adjust = cfun->machine->fp_size
+ cfun->machine->gp_size
+ cfun->machine->lp_size
so we have to deal with it as well. */
/* Adjust $sp = $sp + local_size + out_args_size
- + callee_saved_area_padding_bytes. */
+ + callee_saved_area_gpr_padding_bytes. */
sp_adjust = cfun->machine->local_size
+ cfun->machine->out_args_size
+ cfun->machine->callee_saved_area_gpr_padding_bytes;
if (sp_adjust)
{
/* Generate sp adjustment instruction
- if and only if sp_adjust != 0. */
+ if and only if sp_adjust != 0. */
sp_adjust_insn = gen_addsi3 (stack_pointer_rtx,
stack_pointer_rtx,
GEN_INT (sp_adjust));
}
/* nds32_emit_stack_v3pop(last_regno, sp_adjust),
- the pattern 'stack_v3pop' is implementad in nds32.md. */
+ the pattern 'stack_v3pop' is implementad in nds32.md. */
/* The (const_int 14) means v3pop always pop { $fp $gp $lp }. */
nds32_emit_stack_v3pop (Rb, Re,
GEN_INT (14), GEN_INT (0));
/* If no stack was created, two conditions must be satisfied:
1. This is a naked function.
- So there is no callee-saved, local size, or outgoing size.
+ So there is no callee-saved, local size, or outgoing size.
2. This is NOT a variadic function.
- So there is no pushing arguement registers into the stack. */
+ So there is no pushing arguement registers into the stack. */
return (cfun->machine->naked_p && (cfun->machine->va_args_size == 0));
}
projects / gcc.git / commitdiff