+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * config.bfd (thumb-*-oabi): Don't handle in list of obsolete
+ targets.
+ (strongarm*, thumb*, xscale*): Remove architectures.
+ (strongarm-*-kaos*, thumb-*-coff, thumb-*-elf, thumb-epoc-pe*,
+ thumb-*-pe*, strongarm-*-elf, strongarm-*-coff, xscale-*-elf,
+ xscale-*-coff): Remove targets.
+
2011-04-01 Tristan Gingold <gingold@adacore.com>
* elfxx-ia64.c: include bfd_stdint.h
sparc-*-lynxos* | \
vax-*-vms* | \
arm-*-oabi | \
- thumb-*-oabi | \
a29k-* | \
hppa*-*-rtems* | \
*-go32-rtems* | \
sh*) targ_archs=bfd_sh_arch ;;
sparc*) targ_archs=bfd_sparc_arch ;;
spu*) targ_archs=bfd_spu_arch ;;
-strongarm*) targ_archs=bfd_arm_arch ;;
-thumb*) targ_archs=bfd_arm_arch ;;
v850*) targ_archs=bfd_v850_arch ;;
x86_64*) targ_archs=bfd_i386_arch ;;
-xscale*) targ_archs=bfd_arm_arch ;;
xtensa*) targ_archs=bfd_xtensa_arch ;;
z80|r800) targ_archs=bfd_z80_arch ;;
z8k*) targ_archs=bfd_z8k_arch ;;
targ_defvec=bfd_elf32_bigarm_vec
targ_selvecs=bfd_elf32_littlearm_vec
;;
- arm-*-kaos* | strongarm-*-kaos*)
+ arm-*-kaos*)
targ_defvec=bfd_elf32_littlearm_vec
targ_selvecs=bfd_elf32_bigarm_vec
;;
targ_selvecs=bfd_elf32_bigarm_vec
;;
- thumb-*-coff)
- targ_defvec=armcoff_little_vec
- targ_selvecs=armcoff_big_vec
- targ_underscore=yes
- ;;
- thumb-*-elf)
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
- thumb-epoc-pe*)
- targ_defvec=arm_epoc_pe_little_vec
- targ_selvecs="arm_epoc_pe_little_vec arm_epoc_pe_big_vec arm_epoc_pei_little_vec arm_epoc_pei_big_vec"
- targ_underscore=no
- ;;
- thumb-*-pe*)
- targ_defvec=armpe_little_vec
- targ_selvecs="armpe_little_vec armpe_big_vec armpei_little_vec armpei_big_vec"
- targ_underscore=yes
- ;;
- strongarm-*-elf)
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
- strongarm-*-coff)
- targ_defvec=armcoff_little_vec
- targ_selvecs=armcoff_big_vec
- targ_underscore=yes
- ;;
- xscale-*-elf)
- targ_defvec=bfd_elf32_littlearm_vec
- targ_selvecs=bfd_elf32_bigarm_vec
- ;;
- xscale-*-coff)
- targ_defvec=armcoff_little_vec
- targ_selvecs=armcoff_big_vec
- targ_underscore=yes
- ;;
-
avr-*-*)
targ_defvec=bfd_elf32_avr_vec
;;
+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.in (thumb-*-pe*): Remove.
+ * configure: Regenerate.
+
2011-04-05 Sterling Augustine <augustine.sterling@gmail.com>
* MAINTAINERS: Update my email address.
BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
;;
- thumb-*-pe*)
- BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
- if test -z "$DLLTOOL_DEFAULT"; then
- DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_ARM"
- fi
- DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM"
- BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
- BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
- ;;
x86_64-*-mingw*)
BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
if test -z "$DLLTOOL_DEFAULT"; then
BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
;;
- thumb-*-pe*)
- BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
- if test -z "$DLLTOOL_DEFAULT"; then
- DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_ARM"
- fi
- DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM"
- BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
- BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
- ;;
x86_64-*-mingw*)
BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
if test -z "$DLLTOOL_DEFAULT"; then
+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * binutils-all/objcopy.exp (*arm*-*-coff): Change to arm*-*-coff.
+ (xscale-*-coff, thumb*-*-coff, thumb*-*-pe): Don't handle.
+
2011-03-31 Bernd Schmidt <bernds@codesourcery.com>
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-# 2004, 2006, 2007, 2009, 2010
+# 2004, 2006, 2007, 2009, 2010, 2011
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# mips_elf_sym_is_global.
setup_xfail "mips*-*-elf"
- setup_xfail "*arm*-*-coff"
- setup_xfail "xscale-*-coff"
+ setup_xfail "arm*-*-coff"
setup_xfail "arm*-*-pe"
- setup_xfail "thumb*-*-coff"
- setup_xfail "thumb*-*-pe"
setup_xfail "*-*-mingw*"
setup_xfail "*-*-cygwin*"
+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.tgt (strongarm*be, strongarm*b, strongarm*,
+ xscale*be|xscale*b, xscale*): Remove architectures.
+ (thumb-*-coff, thumb-*-rtems*, thumb-*-elf, thumb-epoc-pe,
+ thumb-*-pe, xscale-*-coff, xscale-*-elf): Remove targets.
+
2011-04-01 Tristan Gingold <gingold@adacore.com>
* config/tc-ia64.c (md_apply_fix): Add a cast to avoid a warning.
sparclet*) cpu_type=sparc arch=sparclet ;;
sparclite*) cpu_type=sparc arch=sparclite ;;
sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
- strongarm*be) cpu_type=arm endian=big ;;
- strongarm*b) cpu_type=arm endian=big ;;
- strongarm*) cpu_type=arm endian=little ;;
v850*) cpu_type=v850 ;;
x86_64*) cpu_type=i386 arch=x86_64;;
- xscale*be|xscale*b) cpu_type=arm endian=big ;;
- xscale*) cpu_type=arm endian=little ;;
xtensa*) cpu_type=xtensa arch=xtensa ;;
*) cpu_type=${cpu} ;;
esac
arc-*-elf*) fmt=elf ;;
arm-*-aout) fmt=aout ;;
- arm-*-coff | thumb-*-coff) fmt=coff ;;
- arm-*-rtems* | thumb-*-rtems*) fmt=elf ;;
- arm-*-elf | thumb-*-elf) fmt=elf ;;
+ arm-*-coff) fmt=coff ;;
+ arm-*-rtems*) fmt=elf ;;
+ arm-*-elf) fmt=elf ;;
arm-*-eabi*) fmt=elf em=armeabi ;;
arm-*-symbianelf*) fmt=elf em=symbian ;;
arm-*-kaos*) fmt=elf ;;
arm-*-netbsdelf*) fmt=elf em=nbsd ;;
arm-*-*n*bsd*) fmt=aout em=nbsd ;;
arm-*-nto*) fmt=elf ;;
- arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
+ arm-epoc-pe) fmt=coff em=epoc-pe ;;
arm-wince-pe | arm-*-wince | arm*-*-mingw32ce* | arm*-*-cegcc*)
fmt=coff em=wince-pe ;;
- arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
+ arm-*-pe) fmt=coff em=pe ;;
arm-*-riscix*) fmt=aout em=riscix ;;
avr-*-*) fmt=elf bfd_gas=yes ;;
vax-*-netbsdelf*) fmt=elf em=nbsd ;;
vax-*-linux-*) fmt=elf em=linux ;;
- xscale-*-coff) fmt=coff ;;
- xscale-*-elf) fmt=elf ;;
-
xstormy16-*-*) fmt=elf ;;
xtensa*-*-*) fmt=elf ;;
+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * gas/all/gas.exp (*arm*-*-coff): Change to arm*-*-coff.
+ (thumb*-*-coff, thumb*-*-pe*): Don;t handle.
+ * gas/arm/arm.exp (*arm*-*-*): Change to arm*-*-*.
+ (*xscale*-*-*): Don't handle.
+ * gas/cfi/cfi.exp (xscale*-*): Don't handle.
+ * gas/elf/elf.exp (*arm*-*-*): Change to arm*-*-*.
+ (xscale*-*-*): Don't handle.
+
2011-03-31 Bernd Schmidt <bernds@codesourcery.com>
* gas/tic6x/scomm-directive-1.s: New test.
# We omit the ARM toolchains because they define locals to
# start with '.', which eliminates .eos, .text etc from the output.
# Omit c54x, since .tag and .def mean something different on that target
-if { ([istarget *-*-coff*] && ![istarget *arm*-*-coff] && ![istarget thumb*-*-coff] && ![istarget xscale-*-coff] && ![istarget *c4x*-*-coff] && ![istarget *c54x*-*-coff]) \
- ||([istarget *-*-pe*] && ![istarget arm*-*-pe*] && ![istarget thumb*-*-pe*]) \
+if { ([istarget *-*-coff*] && ![istarget arm*-*-coff] && ![istarget *c4x*-*-coff] && ![istarget *c54x*-*-coff]) \
+ ||([istarget *-*-pe*] && ![istarget arm*-*-pe*]) \
|| [istarget i*86-*-aix*] \
|| [istarget i*86-*-sco*] \
|| [istarget i*86-*-isc*] \
# Some ARM tests
#
-if {[istarget *arm*-*-*] || [istarget *xscale*-*-*]} {
+if {[istarget arm*-*-*]} {
run_dump_tests [lsort [glob -nocomplain $srcdir/$subdir/*.d]]
}
run_dump_test "cfi-sh-1"
}
-} elseif { [istarget "arm*-*"] || [istarget "xscale*-*"] } then {
+} elseif { [istarget "arm*-*"] } then {
# Only ELF based ARM targets support CFI.
if { [is_pecoff_format] } then {
return
if {[istarget "rx-*-*"]} then {
set target_machine -rx
}
- if { ([istarget "*arm*-*-*"]
- || [istarget "xscale*-*-*"]) } {
+ if {[istarget "arm*-*-*"]} {
if { ([istarget "*-*-*eabi"]
|| [istarget "*-*-linux-*"]
# So for these targets we cannot include an IFUNC symbol type
# in the symbol type test.
if { [istarget "msp*-*-*"]
- || [istarget "arm*-*-*"]
- || [istarget "xscale*-*-*"]} then {
+ || [istarget "arm*-*-*"]} then {
run_elf_list_test "type-noifunc" "" "" "-s" "| grep \"1 *\\\[FONTC\\\]\""
} else {
run_dump_test ifunc-1
+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.tgt (thumb-*-linux-* | thumb-*-uclinux*,
+ strongarm-*-coff, strongarm-*-elf, strongarm-*-kaos*,
+ thumb-*-coff, thumb-*-elf, thumb-epoc-pe, thumb-*-pe,
+ xscale-*-coff, xscale-*-elf): Remove targets.
+
2011-03-31 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt: Add elf_l1om to targ_extra_libpath for
;;
arm-*-vxworks) targ_emul=armelf_vxworks ;;
arm*-*-conix*) targ_emul=armelf ;;
-thumb-*-linux-* | thumb-*-uclinux*) targ_emul=armelf_linux; targ_extra_emuls=armelf ;;
-strongarm-*-coff) targ_emul=armcoff ;;
-strongarm-*-elf) targ_emul=armelf ;;
-strongarm-*-kaos*) targ_emul=armelf ;;
-thumb-*-coff) targ_emul=armcoff ;;
-thumb-*-elf) targ_emul=armelf ;;
-thumb-epoc-pe) targ_emul=arm_epoc_pe ;
- targ_extra_ofiles="deffilep.o pe-dll.o" ;;
-thumb-*-pe) targ_emul=armpe ;
- targ_extra_ofiles="deffilep.o pe-dll.o" ;;
-xscale-*-coff) targ_emul=armcoff ;;
-xscale-*-elf) targ_emul=armelf
;;
avr-*-*) targ_emul=avr2
targ_extra_emuls="avr1 avr25 avr3 avr31 avr35 avr4 avr5 avr51 avr6 avrxmega1 avrxmega2 avrxmega3 avrxmega4 avrxmega5 avrxmega6 avrxmega7"
+2011-04-06 Joseph Myers <joseph@codesourcery.com>
+
+ * ld-selective/selective.exp (xscale-*-*): Don't handle.
+ * ld-srec/srec.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't
+ handle.
+ (*arm*-*-*): Change to arm*-*-*.
+ (strongarm*-*-coff, xscale*-*-coff, thumb-*-coff*, thumb-*-pe*,
+ thumb-*-elf*, strongarm*-*-*, thumb-*-*): Remove xfails.
+ * ld-undefined/undefined.exp (thumb*-*-pe*, thumb*-*-pe*): Remove
+ commented-out xfails.
+ (thumb-elf): Remove reference in comment.
+ * lib/ld-lib.exp (strongarm*-*-*, xscale*-*-*, thumb-*-*): Don't
+ handle.
+
2011-04-04 H.J. Lu <hongjiu.lu@intel.com>
PR ld/12627
# Expect script for LD selective linking tests
-# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009
-# Free Software Foundation, Inc.
+# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009,
+# 2010, 2011 Free Software Foundation, Inc.
#
# This file is part of the GNU Binutils.
#
}
# ARM targets need libgcc.a in THUMB mode so that __call_via_r3 is provided
- if {[istarget arm-*-*] || [istarget xscale-*-*]} {
+ if {[istarget arm-*-*]} {
set libgcc [remote_exec host "$compiler -print-libgcc-file-name"]
set libgcc [lindex $libgcc 1]
regsub -all "\[\r\n\]" $libgcc "" libgcc
# Test linking directly to S-records.
# By Ian Lance Taylor, Cygnus Support.
-# Copyright 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2009
+# Copyright 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2009, 2011
# Free Software Foundation, Inc.
#
# This file is part of the GNU Binutils.
setup_xfail "sh64*-*-*"
}
- if {[istarget arm*-*-*] || \
- [istarget strongarm*-*-*] || \
- [istarget xscale*-*-*] || \
- [istarget thumb-*-*] } {
+ if {[istarget arm*-*-*]} {
# ARM targets cannot convert format in the linker
# using the --oformat command line switch
- setup_xfail "*arm*-*-*"
- setup_xfail "xscale-*-*"
- setup_xfail "thumb-*-*"
+ setup_xfail "arm*-*-*"
}
# V850 targets need libgcc.a
# The S-record linker doesn't build ARM/Thumb stubs.
setup_xfail "arm-*-coff"
-setup_xfail "strongarm*-*-coff"
-setup_xfail "xscale*-*-coff"
setup_xfail "arm-*-pe*"
# setup_xfail "arm-*elf*"
-setup_xfail "thumb-*-coff*"
-setup_xfail "thumb-*-pe*"
-setup_xfail "thumb-*-elf*"
setup_xfail "arm*-*-linux*"
# The S-record linker doesn't include the .{zda} sections.
setup_xfail "mips*-*-irix5*" "mips*-*-irix6*" "mips*-*-linux*"
setup_xfail "*-*-aix*" "*-*-xcoff*"
setup_xfail "arm*-*-*"
-setup_xfail "strongarm*-*-*"
-setup_xfail "thumb-*-*"
setup_xfail "v850*-*-elf"
setup_xfail "alpha*-*-elf*" "alpha*-*-linux-*" "alpha*-*-gnu*"
setup_xfail "alpha*-*-netbsd*"
# By Ian Lance Taylor, Cygnus Support
#
# Copyright 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2007, 2008 Free Software Foundation, Inc.
+# 2005, 2007, 2008, 2010, 2011 Free Software Foundation, Inc.
#
# This file is part of the GNU Binutils.
#
# ARM PE defaults to using stabs debugging, which we can't handle for
# a COFF file.
#setup_xfail "arm*-*-pe*"
-#setup_xfail "thumb*-*-pe*"
# For Xtensa on GNU Linux systems (or any other system where PIC code is
# always used), the address of the undefined function is in a literal pool
# ARM PE defaults to using stabs debugging, which we can't handle for
# a COFF file.
#setup_xfail "arm*-*-pe*"
- #setup_xfail "thumb*-*-pe*"
}
set ml "undefined.c:9: undefined reference to `*this_function_is_not_defined'"
-# With targets that use elf/dwarf2, such as the arm-elf and thumb-elf
-# toolchains, the code in bfd/elf.c:_bfd_elf_find_nearest_line() is called
+# With targets that use elf/dwarf2, such as the arm-elf
+# toolchain, the code in bfd/elf.c:_bfd_elf_find_nearest_line() is called
# in order to locate the file name/line number where the undefined
# reference occurs. Unfortunately this tries to use the dwarf2 debug
# information held in the .debug_info section. This section contains a series
# Support routines for LD testsuite.
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-# 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+# Free Software Foundation, Inc.
#
# This file is part of the GNU Binutils.
#
set flags "--defsym __stack_chk_fail=0"
# ARM targets call __gccmain
- if {[istarget arm*-*-*] || \
- [istarget strongarm*-*-*] || \
- [istarget xscale*-*-*] || \
- [istarget thumb-*-*] } {
+ if {[istarget arm*-*-*]} {
append flags " --defsym __gccmain=0"
}
projects / binutils-gdb.git / commitdiff