* config/rs6000/rs6000.md (rsqrt<mode>2): Call new function name.
(sqrt<mode>2): Replace define_insn with define_expand that may call
rs6000_emit_swsqrt.
-
+
2015-12-04 Aditya Kumar <aditya.k7@samsung.com>
Sebastian Pop <s.pop@samsung.com>
2015-12-04 Nathan Sidwell <nathan@acm.org>
- * config/nvptx/nvptx.c (nvptx_assemble_decl_begin): New,
- replacing ...
+ * config/nvptx/nvptx.c (nvptx_assemble_decl_begin): New, replacing ...
(init_output_initializer): ... this.
(nvptx_output_aligned_decl, nvptx_asm_declare_constant_name,
nvptx_declare_object_name, nvptx_assemble_undefined_decl): Use
2015-12-04 Segher Boessenkool <segher@kernel.crashing.org>
- * (cstore<mode>4_unsigned): Use gpc_reg_operand instead of
- register_operand. Remove empty constraints. Use std::swap.
+ * config/rs6000/rs6000.md (cstore<mode>4_unsigned): Use gpc_reg_operand
+ instead of register_operand. Remove empty constraints. Use std::swap.
(cstore_si_as_di, cstore<mode>4_signed_imm,
cstore<mode>4_unsigned_imm, cstore<mode>4 for GPR): Use
gpc_reg_operand instead of register_operand.
2015-12-04 Nick Clifton <nickc@redhat.com>
* config.gcc (extra_gcc_objs): Define for MSP430.
- * common/config/msp430/msp430-common.c (msp430_handle_option):
- Pass both -mmcu and -mcpu on to the back end if they are both
- defined.
+ * common/config/msp430/msp430-common.c (msp430_handle_option):
+ Pass both -mmcu and -mcpu on to the back end if they are both defined.
* config/msp430/msp430.c (hwmult_name): New function.
- (msp430_option_override): If an unrecognised MCU name is
+ (msp430_option_override): If an unrecognised MCU name is
detected only warn if the user has not provided suitable
- -mhwmult and -mcpu options. Use msp430_warn_mcu to control
+ -mhwmult and -mcpu options. Use msp430_warn_mcu to control
warning messages. Generate warnings about conflicts between
-mmcu and -mcpu and -mhwmult options.
If neither -mcpu nor -mmcu have been specified but -mhwmult=
* config/msp430/driver-msp430.c: New file.
* config/msp430/msp430.opt (warn-mcu): New option.
* doc/invoke.texi: Update description of -mhwmult=auto.
- Document -mwarn-mcu option.
+ Document -mwarn-mcu option.
2015-12-04 Segher Boessenkool <segher&kernel.crashing.org>
- * (cstore<mode>4_signed): New expander.
+ * config/rs6000/rs6000.md (cstore<mode>4_signed): New expander.
(cstore<mode>4): Call it.
2015-12-04 Jakub Jelinek <jakub@redhat.com>
* doc/generic.texi (Blocks): Document new handling of VLAs.
2015-12-04 Eric Botcazou <ebotcazou@adacore.com>
- Tristan Gingold <gingold@adacore.com>
+ Tristan Gingold <gingold@adacore.com>
PR middle-end/65958
* config/aarch64/aarch64-protos.h (aarch64_output_probe_stack-range):
(nvptx_addr_space_from_sym): Delete.
(nvptx_encode_section_info): New.
(section_for_sym, section_for_decl): New.
- (nvptx_maybe_convert_symbolic_operand): Get data area from symbol
- flags,
+ (nvptx_maybe_convert_symbolic_operand): Get data area from symbol flags.
(nvptx_section_from_addr_space): Delete.
(nvptx_section_for_decl): Delete.
(nvptx_output_aligned, nvptx_declare_object_name,
2015-12-02 Aditya Kumar <aditya.k7@samsung.com>
Sebastian Pop <s.pop@samsung.com>
- * graphite-isl-ast-to-gimple.c (binary_op_to_tree): Handle isl_ast_op_zdiv_r.
- (gcc_expression_from_isl_expr_op): Same.
+ * graphite-isl-ast-to-gimple.c (binary_op_to_tree): Handle
+ isl_ast_op_zdiv_r.
+ (gcc_expression_from_isl_expr_op): Same.
2015-12-02 Aditya Kumar <aditya.k7@samsung.com>
Sebastian Pop <s.pop@samsung.com>
* omp-low.c (install_var_field, scan_sharing_clauses): Add and handle
parameter base_pointers_restrict.
(omp_target_base_pointers_restrict_p): New function.
- (scan_omp_target): Call scan_sharing_clauses with base_pointers_restrict
- arg.
+ (scan_omp_target): Call scan_sharing_clauses with
+ base_pointers_restrict arg.
2015-12-02 Nathan Sidwell <nathan@acm.org>
(nvptx_underlying_object_mode): Delete.
* config/nvptx/nvptx.c (nvptx_underlying_object_mode): Delete.
(output_reg): New.
- (nvptx_declare_function_name): Use output_reg. Remove punning
- buffer.
+ (nvptx_declare_function_name): Use output_reg. Remove punning buffer.
(nvptx_output_mov_insn): New.
(nvptx_print_operand): Separate SUBREG handling, remove 'f' case,
Use output_reg. Merge 't' and 'u' handling.
UNSPEC_CPLX_HIGHPART): Delete.
(*mov<mode>_insn [QHSDIM): Remove unnecessary constraints, use
nvptx_output_mov_insn.
- (*mov<mode>_insn [SDFM): Reorder constraints to match integer
- moc. Use nvptx_output_mov_insn.
- (highpartscsf2, set_highpartscsf2, lowpartscsf2,
- set_lowpartscsf2): Delete.
+ (*mov<mode>_insn [SDFM): Reorder constraints to match integer moc.
+ Use nvptx_output_mov_insn.
+ (highpartscsf2, set_highpartscsf2, lowpartscsf2, set_lowpartscsf2):
+ Delete.
(mov<mode> [SDCM]): Delete.
2015-12-02 Richard Biener <rguenther@suse.de>
2015-12-02 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/s390/predicates.md (const_mask_operand): New predicate.
- * config/s390/s390-builtins.def: Set a smaller bitmask for a few builtins.
+ * config/s390/s390-builtins.def: Set a smaller bitmask
+ for a few builtins.
* config/s390/vector.md: Change predicate from immediate_operand
to either const_int_operand or const_mask_operand. Add special
insn conditions on patterns which have to exclude certain values.
2015-12-02 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/s390/vector.md ("*vec_splats<mode>"): Fix constraint
- latter I->K.
+ letter I->K.
2015-12-02 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
- * config/s390/s390.md ("bswap<mode>2"): Add support for strv and
- strvg.
+ * config/s390/s390.md ("bswap<mode>2"): Add support for strv and strvg.
("bswaphi2"): New pattern.
New splitter for HI reg-reg bswap.
2015-11-27 Jiri Engelthaler <engycz@gmail.com>
PR driver/68029
- * opts-common.c (prune_options): Don't ignore -fdiagnostics-color
+ * opts-common.c (prune_options): Don't ignore -fdiagnostics-color
if it is the first parameter.
2015-12-01 Richard Sandiford <richard.sandiford@arm.com>
Cesar Philippidis <cesar@codesourcery.com>
James Norris <James_Norris@mentor.com>
- * gimple-pretty-print.c (dump_gimple_omp_target): Add host_data
- support.
+ * gimple-pretty-print.c (dump_gimple_omp_target): Add host_data support.
* gimple.h (gf_mask): Add GF_OMP_TARGET_KIND_OACC_HOST_DATA.
(is_gimple_omp_oacc): Add support for above.
* gimplify.c (omp_region_type): Add ORT_ACC_HOST_DATA.
(lower_omp_target): Skip over outer host_data regions when looking
up decls. Support use_device.
(make_gimple_omp_edges): Support host_data.
- * tree-nested.c (convert_nonlocal_omp_clauses): Add use_device
- clause.
+ * tree-nested.c (convert_nonlocal_omp_clauses): Add use_device clause.
2015-12-01 Marek Polacek <polacek@redhat.com>
PR middle-end/68582
- * cgraphunit.c (check_global_declaration): Only depend on TREE_THIS_VOLATILE
- for VAR_DECLs.
+ * cgraphunit.c (check_global_declaration): Only depend
+ on TREE_THIS_VOLATILE for VAR_DECLs.
2015-12-01 Richard Sandiford <richard.sandiford@arm.com>
PR target/68617
* config/arm/arm.opt (unaligned_access): Save.
* config/arm/arm-c.c (__ARM_FEATURE_UNALIGNED): Conditionally define.
- * config/arm/arm.c (arm_option_override): Move unaligned_access setting
+ * config/arm/arm.c (arm_option_override): Move unaligned_access setting.
(arm_option_override_internal): ... here.
* config/arm/arm.h (TARGET_32BIT_P): New macro.
2015-11-30 Richard Biener <rguenther@suse.de>
PR c/68162
- * dwarf2out.c (gen_type_die_with_usage): Keep variant types
- of arrays.
+ * dwarf2out.c (gen_type_die_with_usage): Keep variant types of arrays.
2015-11-30 Venkataramanan Kumar <Venkataramanan.Kumar@amd.com>
- * tree-if-conv.c (struct ifc_dr): Add new tree
- base_predicate field.
+ * tree-if-conv.c (struct ifc_dr): Add new tree base_predicate field.
(hash_memrefs_baserefs_and_store_DRs_read_written_info): Hash
base ref, DR pairs and store base_predicate for write type DRs.
(ifcvt_memrefs_wont_trap): Guard checks with
2015-11-29 Jan Hubicka <hubicka@ucw.cz>
- * ipa-devirt.c (add_type_duplicate): Remove redundant ODR violation
- dump
+ * ipa-devirt.c (add_type_duplicate): Remove redundant
+ ODR violation dump.
2015-11-29 David Edelsohn <dje.gcc@gmail.com>
PR tree-optimization/68559
* tree-vect-data-refs.c (vect_analyze_group_access_1): Move
peeling for gap checks ...
- * tree-vect-stmts.c (vectorizable_load): ... here and relax
- for SLP.
+ * tree-vect-stmts.c (vectorizable_load): ... here and relax for SLP.
* tree-vect-loop.c (vect_analyze_loop_2): Re-set
LOOP_VINFO_PEELING_FOR_GAPS before re-trying without SLP.
2015-11-27 Nathan Sidwell <nathan@acm.org>
- * config/nvptx/nvptx-protos.h (nvptx_record_needed_decl): Don't
- declare.
+ * config/nvptx/nvptx-protos.h (nvptx_record_needed_decl): Don't declare.
* config/nvptx/nvptx.c (write_func_decl_from_insn): Move earlier.
(nvptx_record_fndecl): Don't return value, remove force
argument. Require fndecl.
* ipa-devirt.c (ipa_devirt): Use auto_vec instead
of a local-scope vec.
- (struct final_warning_record): Use auto_vec instead
- of vec.
+ (struct final_warning_record): Use auto_vec instead of vec.
2015-11-27 Richard Biener <rguenther@suse.de>
broken.
2015-11-26 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
- Bernd Schmidt <bschmidt@redhat.com>
+ Bernd Schmidt <bschmidt@redhat.com>
PR rtl-optimization/67226
* calls.c (store_one_arg): Take into account
TV_IPA_LTO_OUTPUT): New.
* lto-compress.c: Include timevar.h
(lto_end_compression, lto_end_uncompression): Add timers.
- * langhooks.c: Include timevar.h
+ * langhooks.c: Include timevar.h.
(lhd_append_data): Add timer.
2015-11-25 Jan Hubicka <hubicka@ucw.cz>
* config/nvptx/nvptx.md (load_arg_reg<mode>): Arg number
constraint is 'n'.
- * config/nvptx/nvptx.c (write_one_arg): Use 'i' directly as arg
- number.
+ * config/nvptx/nvptx.c (write_one_arg): Use 'i' directly as arg number.
(nvptx_write_function_decl): Number args from 0.
(nvptx_declare_function_name): Likewise.
(nvptx_function_incoming_arg): Likewise.
* tree-ssa-uncprop.c (val_ssa_equiv_hash_traits): Likewise.
2015-11-24 Richard Biener <rguenther@suse.de>
- Kyrylo Tkachov <kyrylo.tkachov@arm.com>
+ Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR middle-end/68375
* cfgloop.c (get_loop_body_in_bfs_order): Restructure loop to avoid
are going to instrument it and it may copy pointers.
2015-11-24 Bernd Schmidt <bschmidt@redhat.com>
- Kyrylo Tkachov <kyrylo.tkachov@arm.com>
+ Kyrylo Tkachov <kyrylo.tkachov@arm.com>
PR rtl-optimization/68194
PR rtl-optimization/68328
Sebastian Pop <s.pop@samsung.com>
PR tree-optimization/68314
- * graphite-optimize-isl.c (optimize_isl): Do not call isl_union_map_is_equal.
+ * graphite-optimize-isl.c (optimize_isl): Do not call
+ isl_union_map_is_equal.
* graphite-poly.c (new_scop): Remove original_schedule.
(free_scop): Same.
* graphite-poly.h (struct scop): Same.
- * graphite-sese-to-poly.c (build_pbb_minimal_scattering_polyhedrons): Remove.
+ * graphite-sese-to-poly.c (build_pbb_minimal_scattering_polyhedrons):
+ Remove.
(build_pbb_scattering_polyhedrons): Add back.
(build_scop_minimal_scattering): Remove.
(build_scop_scattering): Add back.
2015-11-23 Robin Dapp <rdapp@linux.vnet.ibm.com>
- * config/s390/s390.h: Add new symref flags, _NOTALIGN2 etc.
- * config/s390/s390.c (s390_check_symref_alignment): Use new
- symref flags, early abort on wrong alignment
- (s390_secondary_reload): Use new symref flags.
- (s390_encode_section_info): Likewise.
- * config/s390/predicates.md: Likewise.
+ * config/s390/s390.h: Add new symref flags, _NOTALIGN2 etc.
+ * config/s390/s390.c (s390_check_symref_alignment): Use new
+ symref flags, early abort on wrong alignment
+ (s390_secondary_reload): Use new symref flags.
+ (s390_encode_section_info): Likewise.
+ * config/s390/predicates.md: Likewise.
2015-11-23 Kugan Vivekanandarajah <kuganv@linaro.org>
projects / gcc.git / commitdiff