* ABOUT-NLS: Follow spelling conventions.
* ChangeLog: Likewise.
* ChangeLog.1: Likewise.
* ChangeLog.2: Likewise.
* ChangeLog.3: Likewise.
* ChangeLog.4: Likewise.
* ChangeLog.5: Likewise.
* ChangeLog.6: Likewise.
* FSFChangeLog.10: Likewise.
* FSFChangeLog.11: Likewise.
* c-common.c: Likewise.
* c-lex.c: Likewise.
* c-objc-common.c: Likewise.
* cppexp.c: Likewise.
* cppinit.c: Likewise.
* cpplex.c: Likewise.
* doloop.c: Likewise.
* flow.c: Likewise.
* function.c: Likewise.
* integrate.c: Likewise.
* loop.c: Likewise.
* reg-stack.c: Likewise.
* reload.h: Likewise.
* ssa.c: Likewise.
From-SVN: r57188
package, usually in the `intl/' subdirectory, so prior installation of
the GNU `gettext' package is _not_ required. Installers may use
special options at configuration time for changing the default
-behaviour. The commands:
+behavior. The commands:
./configure --with-included-gettext
./configure --disable-nls
+2002-09-16 Kazu Hirata <kazu@cs.umass.edu>
+
+ * ABOUT-NLS: Follow spelling conventions.
+ * ChangeLog: Likewise.
+ * ChangeLog.1: Likewise.
+ * ChangeLog.2: Likewise.
+ * ChangeLog.3: Likewise.
+ * ChangeLog.4: Likewise.
+ * ChangeLog.5: Likewise.
+ * ChangeLog.6: Likewise.
+ * FSFChangeLog.10: Likewise.
+ * FSFChangeLog.11: Likewise.
+ * c-common.c: Likewise.
+ * c-lex.c: Likewise.
+ * c-objc-common.c: Likewise.
+ * cppexp.c: Likewise.
+ * cppinit.c: Likewise.
+ * cpplex.c: Likewise.
+ * doloop.c: Likewise.
+ * flow.c: Likewise.
+ * function.c: Likewise.
+ * integrate.c: Likewise.
+ * loop.c: Likewise.
+ * reg-stack.c: Likewise.
+ * reload.h: Likewise.
+ * ssa.c: Likewise.
+
2002-09-15 Kazu Hirata <kazu@cs.umass.edu>
* ChangeLog: Follow spelling conventions.
2002-09-13 Dhananjay Deshpande <dhananjayd@kpit.com>
* config/h8300/h8300.h (EIGHTBIT_CONSTANT_ADDRESS_P): Add support
- for H8/300, H8/S aa:8 mode.
- (TINY_CONSTANT_ADDRESS_P): Add support for H8/S aa:16 mode.
+ for H8/300, H8S aa:8 mode.
+ (TINY_CONSTANT_ADDRESS_P): Add support for H8S aa:16 mode.
* config/h8300/h8300.c (h8300_adjust_insn_length): Adjust length
for H8/300 aa:8 mode.
(Identifiers implementation): Document that there's normally no
limit on identifier names.
(Integers implementation): Document two's complement.
- (Hints implementation): Document that GCC honours 'inline', mostly.
+ (Hints implementation): Document that GCC honors 'inline', mostly.
(Preprocessing directives implementation): Document that GCC
requires the current time.
* configure.in (remaining_languages_check):
Added check that all languages specified were found.
- Exit if not found. Previous behaviour was silent failure.
+ Exit if not found. Previous behavior was silent failure.
* configure: Regenerated.
2002-06-10 Tim Josling <tej@melbpc.org.au>
2002-05-21 Zdenek Dvorak <rakdver@atrey.karlin.mff.cuni.cz>
* bb-reorder.c (make_reorder_chain_1): Use prev_bb/next_bb to get to
- neighbouring basic blocks. Use ENTRY_BLOCK_PTR->next_bb instead of
+ neighboring basic blocks. Use ENTRY_BLOCK_PTR->next_bb instead of
BASIC_BLOCK (0). Use EXIT_BLOCK_PTR->prev_bb instead of
BASIC_BLOCK (n_basic_blocks - 1).
* cfganal.c (can_fallthru, flow_call_edges_add,
2002-01-08 Kazu Hirata <kazu@hxi.com>
* config/h8300/h8300.c (get_shift_alg): Fix 15-bit LSHIFTRT on
- H8/300H and H8/S.
+ H8/300H and H8S.
2002-01-08 Joseph S. Myers <jsm28@cam.ac.uk>
in registers.
* expr.h (PRETEND_OUTGOING_VARARGS_NAMED): Provide default definition.
- * function.c (assign_parms): Honour PRETEND_OUTGOING_VARARGS_NAMED.
+ * function.c (assign_parms): Honor PRETEND_OUTGOING_VARARGS_NAMED.
* calls.c (expand_call): Likewise.
* sh.c (sh_expand_prologue): For TARGET_HITACHI, don't push varargs /
Thu Dec 23 23:15:22 1999 J"orn Rennecke <amylaar@cygnus.co.uk>
- * reload1.c (emit_input_reload_insns): Restore old behaviour
+ * reload1.c (emit_input_reload_insns): Restore old behavior
wrt. 'special' reloads.
1999-12-23 Zack Weinberg <zack@wolery.cumb.org>
* reload.c (get_secondary_mem): Don't widen floating-point modes.
- * combine.c (subst): Honour CLASS_CANNOT_CHANGE_SIZE when
+ * combine.c (subst): Honor CLASS_CANNOT_CHANGE_SIZE when
substituting the REG in a (subreg:X (reg:Y ...)).
2000-05-28 Neil Booth <NeilB@earthling.net>
boolean_operator for the boolean patterns without NOTs.
* config/rs6000/rs6000.c (reg_or_logical_cint_operand): Rename
- from reg_or_u_cint_operand. Change comment and behaviour.
+ from reg_or_u_cint_operand. Change comment and behavior.
(logical_operand): Clean up, add assertion.
(non_logical_cint_operand): Also check for
reg_or_logical_cint_operand.
(expand_end_bindings): Likewise.
(expand_decl): Likewise. Consult optimize not obey_regdecls.
* toplev.c (obey_regdecls): Remove.
- (rest_of_compilation): Don't set it. Kill stupid in favour of
+ (rest_of_compilation): Don't set it. Kill stupid in favor of
flow1, local-alloc, and reload.
(main): Don't set obey_regdecls.
2000-01-05 Michael Hayes <m.hayes@elec.canterbury.ac.nz>
- * config/c4x/c4x.h (IS_XXX_REG, IS_XXX_REGNO): Swap behaviour of
+ * config/c4x/c4x.h (IS_XXX_REG, IS_XXX_REGNO): Swap behavior of
macros so that they're consistent with their names.
* config/c4x/c4x.c (IS_XXX_REG, IS_XXX_REGNO): Likewise.
* config/c4x/c4x.md (IS_XXX_REG, IS_XXX_REGNO): Likewise.
2000-11-14 Jakub Jelinek <jakub@redhat.com>
- * reload1.c (emit_input_reload_insns): Honour forcing of constants
+ * reload1.c (emit_input_reload_insns): Honor forcing of constants
into memory by PREFERRED_RELOAD_CLASS NO_REGS.
2000-11-14 Michael Matz <matzmich@cs.tu-berlin.de>
(struct cpp_buffer): read_ahead, pfile and col_adjust are
new members.
(struct lexer_state): New structure that determines the state
- and behaviour of the lexer.
+ and behavior of the lexer.
(IN_DIRECTIVE, KNOWN_DIRECTIVE): New macros.
(struct cpp_reader): New member "state". Rename
multiline_string_line and multiline_string_column. Delete
2000-09-18 Joseph S. Myers <jsm28@cam.ac.uk>
- * c-common.c (check_format_types): Reorganise and clean up,
+ * c-common.c (check_format_types): Reorganize and clean up,
checking earlier for ERROR_MARKs and making cur_type into its
TYPE_MAIN_VARIANT where convenient.
* config/h8300.h (TARGET_MAC): New.
(TARGET_SWITCHES): Add -ms2600 and -mno-s2600.
(CONDITIONA_REGISTER_USAGE): Disable the mac register on any
- machine other than H8/S2600.
- * config/h8300.md: Accept mac instructions on the H8/S2600 instead
- of the H8/S2000.
+ machine other than H8S/2600.
+ * config/h8300.md: Accept mac instructions on the H8S/2600 instead
+ of the H8S/2000.
2000-09-14 Alexandre Oliva <aoliva@redhat.com>, Bernd Schmidt <bernds@redhat.co.uk>
rather than DECL_OFFSET_ALIGN.
(place_field): Likewise.
* expmed.c (store_bit_field): Abort on align==0 to avoid
- antisocial machine behaviour.
+ antisocial machine behavior.
2000-08-12 Richard Henderson <rth@cygnus.com>
2000-08-03 Kazu Hirata <kazu@hxi.com>
* h8300.c: Fix a comment typo.
- * h8300.h (OK_FOR_U): Accept a 32-bit constant address on H8/S.
+ * h8300.h (OK_FOR_U): Accept a 32-bit constant address on H8S.
* jump.c: Fix formatting.
* h8300.h (MODES_TIEABLE_P): Accept a combination of QImode and
HImode on all architectures and a combination of HImode and SImode
- on H8/300H and H8/S.
+ on H8/300H and H8S.
* h8300.c (split_adds_subs): Rearrange code for conciseness.
* c-common.h (flag_digraphs): New.
* c-decl.c (c_decode_option): Set flag_digraphs as appropriate.
* c-lex.c (yylex): Use flag_digraphs to decide whether to
- honour digraphs.
+ honor digraphs.
2000-07-13 Zack Weinberg <zack@wolery.cumb.org>
(handle_option): Set digraphs according to standard.
Merge OPT_lang_c89 handler with OPT_std_c89.
- * cpplex.c: (lex_line, can_paste): Honour digraphs in
+ * cpplex.c: (lex_line, can_paste): Honor digraphs in
accordance with the digraphs flag.
* cpplib.h: (struct cpp_options): New option digraphs.
* gcc.c (process_command): Append a DIR_SEPARATOR to a path
specified by the -B switch, if doing so would create a valid
directory name.
- * doc/invoke.texi: Document changed behaviour of -B.
+ * doc/invoke.texi: Document changed behavior of -B.
2001-06-29 DJ Delorie <dj@redhat.com>
* config/arc/arc-protos.h, config/arc/arc.c, config/arc/arc.h
(arc_comp_type_attributes, arc_set_default_type_attributes,
COMP_TYPE_ATTRIBUTES, SET_DEFAULT_TYPE_ATTRIBUTES): Remove
- functions and macros with default behaviour.
+ functions and macros with default behavior.
* config/m32r/m32r-protos.h, config/m32r/m32r.c,
config/m32r/m32r.h (m32r_comp_type_attributes,
m32r_set_default_type_attributes, COMP_TYPE_ATTRIBUTES,
Fri Jun 15 19:35:38 CEST 2001 Jan Hubicka <jh@suse.cz>
- * optabs.c (expand_twoval_binop): Avoid undefined behaviour.
+ * optabs.c (expand_twoval_binop): Avoid undefined behavior.
2001-06-15 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
2001-05-22 Richard Henderson <rth@redhat.com>
- * unwind-dw2-fde.c (__deregister_frame_info): Stubbify in favour of...
+ * unwind-dw2-fde.c (__deregister_frame_info): Stubbify in favor of...
(__deregister_frame_info_bases): New.
* unwind-dw2-fde.h: Declare it.
* libgcc-std.ver: Export it.
(ix86_align_loops): Delete.
(ix86_align_jumps): Delete.
(override_options): Mark -malign-* as obsolete. Emulate their
- behaviour with the -falign-* options. Default -falign-* from
+ behavior with the -falign-* options. Default -falign-* from
the processor table.
* i386.h (FUNCTION_BOUNDARY): Define to 16; revert Richard Kenner's
patch of Wed May 2 13:09:36 2001.
* cppinit.c (cpp_start_read): Remove deps_add_dep call.
* tradcpp.c (main): Add -imacros or -include'd dependencies
for -M*.
- * cpp.texi (-M, -MM): Document -M -include behaviour.
+ * cpp.texi (-M, -MM): Document -M -include behavior.
2001-01-24 Roger Collins <roger@ProProject.com>
(emit_a_shift): Adopt to the new calling prototype of
get_shift_alg.
(function_prologue): Fix code for a monitor
- function. Support H8/S.
+ function. Support H8S.
(function_epilogue): Do not output pop for a monitor function.
2001-01-09 Nick Clifton <nickc@redhat.com>
2001-01-05 Neil Booth <neil@daikokuya.demon.co.uk>
- * cpp.texi: Update for -MP. Clarify behaviour of -MT.
+ * cpp.texi: Update for -MP. Clarify behavior of -MT.
* cppinit.c (initialize_dependency_output): Update.
(cpp_finish): Output dummy targets for -MP.
(OPT_MP): New.
2001-11-13 Kazu Hirata <kazu@hxi.com>
* config/h8300/h8300.c (shift_alg_si): Use special code for
- 25-bit shifts on H8/S.
+ 25-bit shifts on H8S.
(get_shift_alg): Generate special code for 25-bit shifts on
- H8/S.
+ H8S.
2001-11-13 Jakub Jelinek <jakub@redhat.com>
2001-11-12 Kazu Hirata <kazu@hxi.com>
* config/h8300/h8300.c (shift_alg_qi): Use rotations when
- doing 6-bit logical shifts on H8/S.
- (shift_alg_qi): Use special code for 21-bit shifts on H8/S.
+ doing 6-bit logical shifts on H8S.
+ (shift_alg_qi): Use special code for 21-bit shifts on H8S.
(get_shift_alg): Generate special code for 21-bit shifts on
- H8/S.
+ H8S.
2001-11-12 Kazu Hirata <kazu@hxi.com>
2001-09-27 Richard Henderson <rth@redhat.com>
* dwarf2out.c (dwarf2out_frame_finish): Never elide .debug_frame
- in favour of .eh_frame.
+ in favor of .eh_frame.
2001-09-27 Aldy Hernandez <aldyh@redhat.com>
(mark_regs_pat, straighten_stack): New functions.
(reg_to_stack): Amend initialisation of FP_mode_reg.
Mark FP registers mentioned in USE insns before NOTE_INSN_FUNCTION_BEG.
- (get_true_reg): Eliminate FP subreg accesses in favour of the
+ (get_true_reg): Eliminate FP subreg accesses in favor of the
actual FP register in use.
(record_reg_life_pat): Make it work on SUBREGs as well. Make use of
the new mark_regs_pat function. Handle USE insns if called unnested.
Thu Jul 11 10:12:50 1996 Jeffrey A Law (law@cygnus.com)
- * h8300.h (OK_FOR_U): If generating H8/S code, accept
+ * h8300.h (OK_FOR_U): If generating H8S code, accept
SYMBOL_REF and SYMBOL_REF + CONST_INT.
* h8300.c ({shift,rotate}_one): Emit tabs between opcode and
(shift_two, rotate_two): Define.
(get_shift_alg): Accept new argument "assembler2_p" for
rotate/shift by two insns. All callers changed. Rework
- to generate more efficient code on the H8/300, H8/300H, and H8/S.
+ to generate more efficient code on the H8/300, H8/300H, and H8S.
Try to simplify somewhat.
(emit_a_shift): Use shift-by-two insns when they're available.
Emit tabs between opcode and operands to be consistent with
Mon Jul 8 16:27:33 1996 Jeffrey A. Law <law@cygnus.com>
- * First cut at support for the H8/S.
- * h8300.c (h8300_init_once): Handle the H8/S (treat it
+ * First cut at support for the H8S.
+ * h8300.c (h8300_init_once): Handle the H8S (treat it
like the H8/300H).
(dosize, adds_subs_operand, one_insn_adds_subs_operand): Likewise.
(output_adds_subs, const_costs, print_operand): Likewise.
(output_simode_bld, h8300_adjust_insn_length): Likewise.
(push_order, pop_order): Reverse.
(function_prologue): Try to use ldm.l and stm.l insns
- on the H8/S. Minor cleanups.
+ on the H8S. Minor cleanups.
(function_epilogue): Likewise.
- (asm_file_start): Emit ".h8300s" when compiling for the H8/S.
- * h8300/h8300.h (CPP_SPEC): Handle the H8/S.
+ (asm_file_start): Emit ".h8300s" when compiling for the H8S.
+ * h8300/h8300.h (CPP_SPEC): Handle the H8S.
(TARGET_H8300S): New target.
(TARGET_SWITCHES): Add "-ms" and "-mno-s".
- (BITS_PER_WORD): Handle the H8/S (treat it like the H8/300H).
+ (BITS_PER_WORD): Handle the H8S (treat it like the H8/300H).
(UNITS_PER_WORD, POINTER_SIZE, PARM_BOUNDARY): Likewise.
(BIGGEST_ALIGNMENT, BIGGEST_FIELD_ALIGNMENT): Likewise.
(INITIALIZE_TRAMPOLINE, MOVE_MAX, Pmode): Likewise.
- * h8300.md: Handle H8/S just like H8/300H
+ * h8300.md: Handle H8S just like H8/300H
throughout the entire file.
* t-h8300 (MULTILIB_OPTIONS): Build "-ms" libraries too.
- (MULTILIB_DIRNAMES): Put H8/S libraries in "h8300s" directory.
+ (MULTILIB_DIRNAMES): Put H8S libraries in "h8300s" directory.
* h8300/lib1funcs.asm: Emit ".h8300s" pseudo-op when generating
- h8300s object files. Otherwise treat the H8/S just like the H8/300H.
- * ginclude/stdarg.h: Handle the H8/S.
+ h8300s object files. Otherwise treat the H8S just like the H8/300H.
+ * ginclude/stdarg.h: Handle the H8S.
* ginclude/varargs.h: Likewise.
Mon Jul 8 14:50:58 1996 Doug Evans <dje@cygnus.com>
}
}
-/* Try to warn for undefined behaviour in EXPR due to missing sequence
+/* Try to warn for undefined behavior in EXPR due to missing sequence
points. */
static void
{
/* In C99, decimal constants are always signed.
In C89, decimal constants that don't fit in long have
- undefined behaviour; we try to make them unsigned long.
+ undefined behavior; we try to make them unsigned long.
In GCC's extended C89, that last is true of decimal
constants that don't fit in long long, too. */
/* We will not inline a function which uses computed goto. The
addresses of its local labels, which may be tucked into
global storage, are of course not constant across
- instantiations, which causes unexpected behaviour. */
+ instantiations, which causes unexpected behavior. */
if (TREE_CODE (t) != LABEL_DECL)
return node;
"integer constant is too large for its type");
/* If too big to be signed, consider it unsigned. Only warn for
decimal numbers. Traditional numbers were always signed (but
- we still honour an explicit U suffix); but we only have
+ we still honor an explicit U suffix); but we only have
traditional semantics in directives. */
else if (!result.unsignedp
&& !(CPP_OPTION (pfile, traditional)
}
else if (want_value)
{
- /* Ordering here is subtle and intended to favour the
+ /* Ordering here is subtle and intended to favor the
missing parenthesis diagnostics over alternatives. */
if (op.op == CPP_CLOSE_PAREN)
{
}
/* Free resources used by PFILE. Accessing PFILE after this function
- returns leads to undefined behaviour. Returns the error count. */
+ returns leads to undefined behavior. Returns the error count. */
void
cpp_destroy (pfile)
cpp_reader *pfile;
cpp_buffer *buffer = pfile->buffer;
/* Handle CR-LF and LF-CR. Most other implementations (e.g. java)
- only accept CR-LF; maybe we should fall back to that behaviour? */
+ only accept CR-LF; maybe we should fall back to that behavior? */
if (buffer->cur[-1] + buffer->cur[0] == '\r' + '\n')
buffer->cur++;
the second '?'.
Warn if necessary, and returns true if the sequence forms a
- trigraph and the trigraph should be honoured. */
+ trigraph and the trigraph should be honored. */
static bool
trigraph_p (pfile)
cpp_reader *pfile;
If the absolute increment is not 1, the loop can be infinite
even with LTU/GTU, e.g. for (i = 3; i > 0; i -= 2)
- Note that with LE and GE, the loop behaviour is undefined
+ Note that with LE and GE, the loop behavior is undefined
(C++ standard section 5 clause 5) if an overflow occurs, say
between INT_MAX and INT_MAX + 1. We thus don't have to worry
about these two cases.
??? We could compute these conditions at run-time and have a
additional jump around the loop to ensure an infinite loop.
However, it is very unlikely that this is the intended
- behaviour of the loop and checking for these rare boundary
+ behavior of the loop and checking for these rare boundary
conditions would pessimize all other code.
If the loop is executed only a few times an extra check to
int i;
/* Some passes used to forget clear aux field of basic block causing
- sick behaviour here. */
+ sick behavior here. */
#ifdef ENABLE_CHECKING
FOR_BB_BETWEEN (bb, ENTRY_BLOCK_PTR, NULL, next_bb)
if (bb->aux)
note before the end of the first basic block, if there isn't
one already there.
- ??? This behaviour is completely broken when dealing with
+ ??? This behavior is completely broken when dealing with
multiple entry functions. We simply place the note always
into first basic block and let alternate entry points
to be missed.
/* We will not inline a function which uses computed goto. The addresses of
its local labels, which may be tucked into global storage, are of course
- not constant across instantiations, which causes unexpected behaviour. */
+ not constant across instantiations, which causes unexpected behavior. */
if (current_function_has_computed_jump)
return N_("function with computed jump cannot inline");
the loop starts, or the value before the set is
needed before the set occurs...
- ??? Note we have quadratic behaviour here, mitigated
+ ??? Note we have quadratic behavior here, mitigated
by the fact that the previous test will often fail for
large loops. Rather than re-scanning the entire loop
each time for register usage, we should build tables
switch (GET_CODE (*pat))
{
case SUBREG:
- /* Eliminate FP subregister accesses in favour of the
+ /* Eliminate FP subregister accesses in favor of the
actual FP register in use. */
{
rtx subreg;
must be examined for register elimination. */
struct insn_chain
{
- /* Links to the neighbour instructions. */
+ /* Links to the neighbor instructions. */
struct insn_chain *next, *prev;
/* Link through a chains set up by calculate_needs_all_insns, containing
/* Rename the registers to conform to SSA.
This is essentially the algorithm presented in Figure 7.8 of Morgan,
- with a few changes to reduce pattern search time in favour of a bit
+ with a few changes to reduce pattern search time in favor of a bit
more memory usage. */
/* One of these is created for each set. It will live in a list local
projects / gcc.git / commitdiff