* Using History Interactively:: Using History Interactively
* Installing GDB:: Installing GDB
* Maintenance Commands:: Maintenance Commands
+* Remove Protocol:: GDB Remote Serial Protocol
* GNU Free Documentation License:: The license for this documentation
* Index:: Index
@end menu
* Using History Interactively:: Using History Interactively
* Installing GDB:: Installing GDB
* Maintenance Commands:: Maintenance Commands
+* Remove Protocol:: GDB Remote Serial Protocol
* GNU Free Documentation License:: The license for this documentation
* Index:: Index
@end menu
* Server:: Using the gdbserver program
* NetWare:: Using the gdbserve.nlm program
* remote stub:: Implementing a remote stub
-* Protocol:: Communication protocol
@end menu
@node Server
@node remote stub
@section Implementing a remote stub
+@cindex debugging stub, example
+@cindex remote stub, example
+@cindex stub example, remote debugging
+The stub files provided with @value{GDBN} implement the target side of the
+communication protocol, and the @value{GDBN} side is implemented in the
+@value{GDBN} source file @file{remote.c}. Normally, you can simply allow
+these subroutines to communicate, and ignore the details. (If you're
+implementing your own stub file, you can still ignore the details: start
+with one of the existing stub files. @file{sparc-stub.c} is the best
+organized, and therefore the easiest to read.)
+
@cindex remote serial debugging, overview
To debug a program running on another machine (the debugging
@dfn{target} machine), you must first arrange for all the usual
remote} again to connect once more.) If you type @kbd{n}, @value{GDBN}
goes back to waiting.
-@node Protocol
-@section Communication protocol
-@cindex debugging stub, example
-@cindex remote stub, example
-@cindex stub example, remote debugging
-The stub files provided with @value{GDBN} implement the target side of the
-communication protocol, and the @value{GDBN} side is implemented in the
-@value{GDBN} source file @file{remote.c}. Normally, you can simply allow
-these subroutines to communicate, and ignore the details. (If you're
-implementing your own stub file, you can still ignore the details: start
-with one of the existing stub files. @file{sparc-stub.c} is the best
-organized, and therefore the easiest to read.)
+@node Configurations
+@chapter Configuration-Specific Information
-However, there may be occasions when you need to know something about
-the protocol---for example, if there is only one serial port to your
-target machine, you might want your program to do something special if
-it recognizes a packet meant for @value{GDBN}.
+While nearly all @value{GDBN} commands are available for all native and
+cross versions of the debugger, there are some exceptions. This chapter
+describes things that are only available in certain configurations.
-In the examples below, @samp{<-} and @samp{->} are used to indicate
-transmitted and received data respectfully.
+There are three major categories of configurations: native
+configurations, where the host and target are the same, embedded
+operating system configurations, which are usually the same for several
+different processor architectures, and bare embedded processors, which
+are quite different from each other.
-@cindex protocol, @value{GDBN} remote serial
-@cindex serial protocol, @value{GDBN} remote
-@cindex remote serial protocol
-All @value{GDBN} commands and responses (other than acknowledgments) are
-sent as a @var{packet}. A @var{packet} is introduced with the character
-@samp{$}, the actual @var{packet-data}, and the terminating character
-@samp{#} followed by a two-digit @var{checksum}:
+@menu
+* Native::
+* Embedded OS::
+* Embedded Processors::
+* Architectures::
+@end menu
-@example
-@code{$}@var{packet-data}@code{#}@var{checksum}
-@end example
-@noindent
+@node Native
+@section Native
-@cindex checksum, for @value{GDBN} remote
-@noindent
-The two-digit @var{checksum} is computed as the modulo 256 sum of all
-characters between the leading @samp{$} and the trailing @samp{#} (an
-eight bit unsigned checksum).
+This section describes details specific to particular native
+configurations.
-Implementors should note that prior to @value{GDBN} 5.0 the protocol
-specification also included an optional two-digit @var{sequence-id}:
+@menu
+* HP-UX:: HP-UX
+* SVR4 Process Information:: SVR4 process information
+* DJGPP Native:: Features specific to the DJGPP port
+@end menu
-@example
-@code{$}@var{sequence-id}@code{:}@var{packet-data}@code{#}@var{checksum}
-@end example
+@node HP-UX
+@subsection HP-UX
-@cindex sequence-id, for @value{GDBN} remote
-@noindent
-That @var{sequence-id} was appended to the acknowledgment. @value{GDBN}
-has never output @var{sequence-id}s. Stubs that handle packets added
-since @value{GDBN} 5.0 must not accept @var{sequence-id}.
+On HP-UX systems, if you refer to a function or variable name that
+begins with a dollar sign, @value{GDBN} searches for a user or system
+name first, before it searches for a convenience variable.
-@cindex acknowledgment, for @value{GDBN} remote
-When either the host or the target machine receives a packet, the first
-response expected is an acknowledgment: either @samp{+} (to indicate
-the package was received correctly) or @samp{-} (to request
-retransmission):
+@node SVR4 Process Information
+@subsection SVR4 process information
-@example
-<- @code{$}@var{packet-data}@code{#}@var{checksum}
--> @code{+}
-@end example
-@noindent
+@kindex /proc
+@cindex process image
-The host (@value{GDBN}) sends @var{command}s, and the target (the
-debugging stub incorporated in your program) sends a @var{response}. In
-the case of step and continue @var{command}s, the response is only sent
-when the operation has completed (the target has again stopped).
+Many versions of SVR4 provide a facility called @samp{/proc} that can be
+used to examine the image of a running process using file-system
+subroutines. If @value{GDBN} is configured for an operating system with
+this facility, the command @code{info proc} is available to report on
+several kinds of information about the process running your program.
+@code{info proc} works only on SVR4 systems that include the
+@code{procfs} code. This includes OSF/1 (Digital Unix), Solaris, Irix,
+and Unixware, but not HP-UX or Linux, for example.
-@var{packet-data} consists of a sequence of characters with the
-exception of @samp{#} and @samp{$} (see @samp{X} packet for additional
-exceptions).
+@table @code
+@kindex info proc
+@item info proc
+Summarize available information about the process.
-Fields within the packet should be separated using @samp{,} @samp{;} or
-@samp{:}. Except where otherwise noted all numbers are represented in
-HEX with leading zeros suppressed.
+@kindex info proc mappings
+@item info proc mappings
+Report on the address ranges accessible in the program, with information
+on whether your program may read, write, or execute each range.
+@ignore
+@comment These sub-options of 'info proc' were not included when
+@comment procfs.c was re-written. Keep their descriptions around
+@comment against the day when someone finds the time to put them back in.
+@kindex info proc times
+@item info proc times
+Starting time, user CPU time, and system CPU time for your program and
+its children.
-Implementors should note that prior to @value{GDBN} 5.0, the character
-@samp{:} could not appear as the third character in a packet (as it
-would potentially conflict with the @var{sequence-id}).
+@kindex info proc id
+@item info proc id
+Report on the process IDs related to your program: its own process ID,
+the ID of its parent, the process group ID, and the session ID.
-Response @var{data} can be run-length encoded to save space. A @samp{*}
-means that the next character is an @sc{ascii} encoding giving a repeat count
-which stands for that many repetitions of the character preceding the
-@samp{*}. The encoding is @code{n+29}, yielding a printable character
-where @code{n >=3} (which is where rle starts to win). The printable
-characters @samp{$}, @samp{#}, @samp{+} and @samp{-} or with a numeric
-value greater than 126 should not be used.
+@kindex info proc status
+@item info proc status
+General information on the state of the process. If the process is
+stopped, this report includes the reason for stopping, and any signal
+received.
-Some remote systems have used a different run-length encoding mechanism
-loosely refered to as the cisco encoding. Following the @samp{*}
-character are two hex digits that indicate the size of the packet.
+@item info proc all
+Show all the above information about the process.
+@end ignore
+@end table
-So:
-@example
-"@code{0* }"
-@end example
-@noindent
-means the same as "0000".
+@node DJGPP Native
+@subsection Features for Debugging @sc{djgpp} Programs
+@cindex @sc{djgpp} debugging
+@cindex native @sc{djgpp} debugging
+@cindex MS-DOS-specific commands
-The error response returned for some packets includes a two character
-error number. That number is not well defined.
+@sc{djgpp} is the port of @sc{gnu} development tools to MS-DOS and
+MS-Windows. @sc{djgpp} programs are 32-bit protected-mode programs
+that use the @dfn{DPMI} (DOS Protected-Mode Interface) API to run on
+top of real-mode DOS systems and their emulations.
-For any @var{command} not supported by the stub, an empty response
-(@samp{$#00}) should be returned. That way it is possible to extend the
-protocol. A newer @value{GDBN} can tell if a packet is supported based
-on that response.
+@value{GDBN} supports native debugging of @sc{djgpp} programs, and
+defines a few commands specific to the @sc{djgpp} port. This
+subsection describes those commands.
-A stub is required to support the @samp{g}, @samp{G}, @samp{m}, @samp{M},
-@samp{c}, and @samp{s} @var{command}s. All other @var{command}s are
-optional.
+@table @code
+@kindex info dos
+@item info dos
+This is a prefix of @sc{djgpp}-specific commands which print
+information about the target system and important OS structures.
-Below is a complete list of all currently defined @var{command}s and
-their corresponding response @var{data}:
-@page
-@multitable @columnfractions .30 .30 .40
-@item Packet
-@tab Request
-@tab Description
+@kindex sysinfo
+@cindex MS-DOS system info
+@cindex free memory information (MS-DOS)
+@item info dos sysinfo
+This command displays assorted information about the underlying
+platform: the CPU type and features, the OS version and flavor, the
+DPMI version, and the available conventional and DPMI memory.
-@item extended mode
-@tab @code{!}
-@tab
-Enable extended mode. In extended mode, the remote server is made
-persistent. The @samp{R} packet is used to restart the program being
-debugged.
-@item
-@tab reply @samp{OK}
-@tab
-The remote target both supports and has enabled extended mode.
+@cindex GDT
+@cindex LDT
+@cindex IDT
+@cindex segment descriptor tables
+@cindex descriptor tables display
+@item info dos gdt
+@itemx info dos ldt
+@itemx info dos idt
+These 3 commands display entries from, respectively, Global, Local,
+and Interrupt Descriptor Tables (GDT, LDT, and IDT). The descriptor
+tables are data structures which store a descriptor for each segment
+that is currently in use. The segment's selector is an index into a
+descriptor table; the table entry for that index holds the
+descriptor's base address and limit, and its attributes and access
+rights.
-@item last signal
-@tab @code{?}
-@tab
-Indicate the reason the target halted. The reply is the same as for step
-and continue.
-@item
-@tab reply
-@tab see below
+A typical @sc{djgpp} program uses 3 segments: a code segment, a data
+segment (used for both data and the stack), and a DOS segment (which
+allows access to DOS/BIOS data structures and absolute addresses in
+conventional memory). However, the DPMI host will usually define
+additional segments in order to support the DPMI environment.
+@cindex garbled pointers
+These commands allow to display entries from the descriptor tables.
+Without an argument, all entries from the specified table are
+displayed. An argument, which should be an integer expression, means
+display a single entry whose index is given by the argument. For
+example, here's a convenient way to display information about the
+debugged program's data segment:
-@item reserved
-@tab @code{a}
-@tab Reserved for future use
+@smallexample
+@exdent @code{(@value{GDBP}) info dos ldt $ds}
+@exdent @code{0x13f: base=0x11970000 limit=0x0009ffff 32-Bit Data (Read/Write, Exp-up)}
+@end smallexample
-@item set program arguments @strong{(reserved)}
-@tab @code{A}@var{arglen}@code{,}@var{argnum}@code{,}@var{arg}@code{,...}
-@tab
-@item
-@tab
-@tab
-Initialized @samp{argv[]} array passed into program. @var{arglen}
-specifies the number of bytes in the hex encoded byte stream @var{arg}.
-See @file{gdbserver} for more details.
-@item
-@tab reply @code{OK}
-@item
-@tab reply @code{E}@var{NN}
-
-@item set baud @strong{(deprecated)}
-@tab @code{b}@var{baud}
-@tab
-Change the serial line speed to @var{baud}. JTC: @emph{When does the
-transport layer state change? When it's received, or after the ACK is
-transmitted. In either case, there are problems if the command or the
-acknowledgment packet is dropped.} Stan: @emph{If people really wanted
-to add something like this, and get it working for the first time, they
-ought to modify ser-unix.c to send some kind of out-of-band message to a
-specially-setup stub and have the switch happen "in between" packets, so
-that from remote protocol's point of view, nothing actually
-happened.}
+@noindent
+This comes in handy when you want to see whether a pointer is outside
+the data segment's limit (i.e.@: @dfn{garbled}).
-@item set breakpoint @strong{(deprecated)}
-@tab @code{B}@var{addr},@var{mode}
-@tab
-Set (@var{mode} is @samp{S}) or clear (@var{mode} is @samp{C}) a
-breakpoint at @var{addr}. @emph{This has been replaced by the @samp{Z} and
-@samp{z} packets.}
+@cindex page tables display (MS-DOS)
+@item info dos pde
+@itemx info dos pte
+These two commands display entries from, respectively, the Page
+Directory and the Page Tables. Page Directories and Page Tables are
+data structures which control how virtual memory addresses are mapped
+into physical addresses. A Page Table includes an entry for every
+page of memory that is mapped into the program's address space; there
+may be several Page Tables, each one holding up to 4096 entries. A
+Page Directory has up to 4096 entries, one each for every Page Table
+that is currently in use.
-@item continue
-@tab @code{c}@var{addr}
-@tab
-@var{addr} is address to resume. If @var{addr} is omitted, resume at
-current address.
-@item
-@tab reply
-@tab see below
+Without an argument, @kbd{info dos pde} displays the entire Page
+Directory, and @kbd{info dos pte} displays all the entries in all of
+the Page Tables. An argument, an integer expression, given to the
+@kbd{info dos pde} command means display only that entry from the Page
+Directory table. An argument given to the @kbd{info dos pte} command
+means display entries from a single Page Table, the one pointed to by
+the specified entry in the Page Directory.
-@item continue with signal
-@tab @code{C}@var{sig}@code{;}@var{addr}
-@tab
-Continue with signal @var{sig} (hex signal number). If
-@code{;}@var{addr} is omitted, resume at same address.
-@item
-@tab reply
-@tab see below
+@cindex direct memory access (DMA) on MS-DOS
+These commands are useful when your program uses @dfn{DMA} (Direct
+Memory Access), which needs physical addresses to program the DMA
+controller.
-@item toggle debug @strong{(deprecated)}
-@tab @code{d}
-@tab
-toggle debug flag.
+These commands are supported only with some DPMI servers.
-@item detach
-@tab @code{D}
-@tab
-Detach @value{GDBN} from the remote system. Sent to the remote target before
-@value{GDBN} disconnects.
-@item
-@tab reply @emph{no response}
-@tab
-@value{GDBN} does not check for any response after sending this packet.
+@cindex physical address from linear address
+@item info dos address-pte @var{addr}
+This command displays the Page Table entry for a specified linear
+address. The argument linear address @var{addr} should already have the
+appropriate segment's base address added to it, because this command
+accepts addresses which may belong to @emph{any} segment. For
+example, here's how to display the Page Table entry for the page where
+the variable @code{i} is stored:
-@item reserved
-@tab @code{e}
-@tab Reserved for future use
+@smallexample
+@exdent @code{(@value{GDBP}) info dos address-pte __djgpp_base_address + (char *)&i}
+@exdent @code{Page Table entry for address 0x11a00d30:}
+@exdent @code{Base=0x02698000 Dirty Acc. Not-Cached Write-Back Usr Read-Write +0xd30}
+@end smallexample
-@item reserved
-@tab @code{E}
-@tab Reserved for future use
+@noindent
+This says that @code{i} is stored at offset @code{0xd30} from the page
+whose physical base address is @code{0x02698000}, and prints all the
+attributes of that page.
-@item reserved
-@tab @code{f}
-@tab Reserved for future use
+Note that you must cast the addresses of variables to a @code{char *},
+since otherwise the value of @code{__djgpp_base_address}, the base
+address of all variables and functions in a @sc{djgpp} program, will
+be added using the rules of C pointer arithmetics: if @code{i} is
+declared an @code{int}, @value{GDBN} will add 4 times the value of
+@code{__djgpp_base_address} to the address of @code{i}.
-@item reserved
-@tab @code{F}
-@tab Reserved for future use
+Here's another example, it displays the Page Table entry for the
+transfer buffer:
-@item read registers
-@tab @code{g}
-@tab Read general registers.
-@item
-@tab reply @var{XX...}
-@tab
-Each byte of register data is described by two hex digits. The bytes
-with the register are transmitted in target byte order. The size of
-each register and their position within the @samp{g} @var{packet} are
-determined by the @value{GDBN} internal macros @var{REGISTER_RAW_SIZE} and
-@var{REGISTER_NAME} macros. The specification of several standard
-@code{g} packets is specified below.
-@item
-@tab @code{E}@var{NN}
-@tab for an error.
+@smallexample
+@exdent @code{(@value{GDBP}) info dos address-pte *((unsigned *)&_go32_info_block + 3)}
+@exdent @code{Page Table entry for address 0x29110:}
+@exdent @code{Base=0x00029000 Dirty Acc. Not-Cached Write-Back Usr Read-Write +0x110}
+@end smallexample
-@item write regs
-@tab @code{G}@var{XX...}
-@tab
-See @samp{g} for a description of the @var{XX...} data.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
+@noindent
+(The @code{+ 3} offset is because the transfer buffer's address is the
+3rd member of the @code{_go32_info_block} structure.) The output of
+this command clearly shows that addresses in conventional memory are
+mapped 1:1, i.e.@: the physical and linear addresses are identical.
-@item reserved
-@tab @code{h}
-@tab Reserved for future use
+This command is supported only with some DPMI servers.
+@end table
-@item set thread
-@tab @code{H}@var{c}@var{t...}
-@tab
-Set thread for subsequent operations (@samp{m}, @samp{M}, @samp{g},
-@samp{G}, et.al.). @var{c} = @samp{c} for thread used in step and
-continue; @var{t...} can be -1 for all threads. @var{c} = @samp{g} for
-thread used in other operations. If zero, pick a thread, any thread.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
+@node Embedded OS
+@section Embedded Operating Systems
-@c FIXME: JTC:
-@c 'H': How restrictive (or permissive) is the thread model. If a
-@c thread is selected and stopped, are other threads allowed
-@c to continue to execute? As I mentioned above, I think the
-@c semantics of each command when a thread is selected must be
-@c described. For example:
-@c
-@c 'g': If the stub supports threads and a specific thread is
-@c selected, returns the register block from that thread;
-@c otherwise returns current registers.
-@c
-@c 'G' If the stub supports threads and a specific thread is
-@c selected, sets the registers of the register block of
-@c that thread; otherwise sets current registers.
+This section describes configurations involving the debugging of
+embedded operating systems that are available for several different
+architectures.
-@item cycle step @strong{(draft)}
-@tab @code{i}@var{addr}@code{,}@var{nnn}
-@tab
-Step the remote target by a single clock cycle. If @code{,}@var{nnn} is
-present, cycle step @var{nnn} cycles. If @var{addr} is present, cycle
-step starting at that address.
+@menu
+* VxWorks:: Using @value{GDBN} with VxWorks
+@end menu
-@item signal then cycle step @strong{(reserved)}
-@tab @code{I}
-@tab
-See @samp{i} and @samp{S} for likely syntax and semantics.
+@value{GDBN} includes the ability to debug programs running on
+various real-time operating systems.
-@item reserved
-@tab @code{j}
-@tab Reserved for future use
+@node VxWorks
+@subsection Using @value{GDBN} with VxWorks
-@item reserved
-@tab @code{J}
-@tab Reserved for future use
+@cindex VxWorks
-@item kill request
-@tab @code{k}
-@tab
-FIXME: @emph{There is no description of how operate when a specific
-thread context has been selected (ie. does 'k' kill only that thread?)}.
+@table @code
-@item reserved
-@tab @code{l}
-@tab Reserved for future use
+@kindex target vxworks
+@item target vxworks @var{machinename}
+A VxWorks system, attached via TCP/IP. The argument @var{machinename}
+is the target system's machine name or IP address.
-@item reserved
-@tab @code{L}
-@tab Reserved for future use
+@end table
-@item read memory
-@tab @code{m}@var{addr}@code{,}@var{length}
-@tab
-Read @var{length} bytes of memory starting at address @var{addr}.
-Neither @value{GDBN} nor the stub assume that sized memory transfers are assumed
-using word alligned accesses. FIXME: @emph{A word aligned memory
-transfer mechanism is needed.}
-@item
-@tab reply @var{XX...}
-@tab
-@var{XX...} is mem contents. Can be fewer bytes than requested if able
-to read only part of the data. Neither @value{GDBN} nor the stub assume that
-sized memory transfers are assumed using word alligned accesses. FIXME:
-@emph{A word aligned memory transfer mechanism is needed.}
-@item
-@tab reply @code{E}@var{NN}
-@tab @var{NN} is errno
+On VxWorks, @code{load} links @var{filename} dynamically on the
+current target system as well as adding its symbols in @value{GDBN}.
-@item write mem
-@tab @code{M}@var{addr},@var{length}@code{:}@var{XX...}
-@tab
-Write @var{length} bytes of memory starting at address @var{addr}.
-@var{XX...} is the data.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab
-for an error (this includes the case where only part of the data was
-written).
-
-@item reserved
-@tab @code{n}
-@tab Reserved for future use
+@value{GDBN} enables developers to spawn and debug tasks running on networked
+VxWorks targets from a Unix host. Already-running tasks spawned from
+the VxWorks shell can also be debugged. @value{GDBN} uses code that runs on
+both the Unix host and on the VxWorks target. The program
+@code{@value{GDBP}} is installed and executed on the Unix host. (It may be
+installed with the name @code{vxgdb}, to distinguish it from a
+@value{GDBN} for debugging programs on the host itself.)
-@item reserved
-@tab @code{N}
-@tab Reserved for future use
+@table @code
+@item VxWorks-timeout @var{args}
+@kindex vxworks-timeout
+All VxWorks-based targets now support the option @code{vxworks-timeout}.
+This option is set by the user, and @var{args} represents the number of
+seconds @value{GDBN} waits for responses to rpc's. You might use this if
+your VxWorks target is a slow software simulator or is on the far side
+of a thin network line.
+@end table
-@item reserved
-@tab @code{o}
-@tab Reserved for future use
+The following information on connecting to VxWorks was current when
+this manual was produced; newer releases of VxWorks may use revised
+procedures.
-@item reserved
-@tab @code{O}
-@tab Reserved for future use
+@kindex INCLUDE_RDB
+To use @value{GDBN} with VxWorks, you must rebuild your VxWorks kernel
+to include the remote debugging interface routines in the VxWorks
+library @file{rdb.a}. To do this, define @code{INCLUDE_RDB} in the
+VxWorks configuration file @file{configAll.h} and rebuild your VxWorks
+kernel. The resulting kernel contains @file{rdb.a}, and spawns the
+source debugging task @code{tRdbTask} when VxWorks is booted. For more
+information on configuring and remaking VxWorks, see the manufacturer's
+manual.
+@c VxWorks, see the @cite{VxWorks Programmer's Guide}.
-@item read reg @strong{(reserved)}
-@tab @code{p}@var{n...}
-@tab
-See write register.
-@item
-@tab return @var{r....}
-@tab The hex encoded value of the register in target byte order.
+Once you have included @file{rdb.a} in your VxWorks system image and set
+your Unix execution search path to find @value{GDBN}, you are ready to
+run @value{GDBN}. From your Unix host, run @code{@value{GDBP}} (or
+@code{vxgdb}, depending on your installation).
-@item write reg
-@tab @code{P}@var{n...}@code{=}@var{r...}
-@tab
-Write register @var{n...} with value @var{r...}, which contains two hex
-digits for each byte in the register (target byte order).
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
+@value{GDBN} comes up showing the prompt:
-@item general query
-@tab @code{q}@var{query}
-@tab
-Request info about @var{query}. In general @value{GDBN} queries
-have a leading upper case letter. Custom vendor queries should use a
-company prefix (in lower case) ex: @samp{qfsf.var}. @var{query} may
-optionally be followed by a @samp{,} or @samp{;} separated list. Stubs
-must ensure that they match the full @var{query} name.
-@item
-@tab reply @code{XX...}
-@tab Hex encoded data from query. The reply can not be empty.
-@item
-@tab reply @code{E}@var{NN}
-@tab error reply
-@item
-@tab reply @samp{}
-@tab Indicating an unrecognized @var{query}.
+@example
+(vxgdb)
+@end example
-@item general set
-@tab @code{Q}@var{var}@code{=}@var{val}
-@tab
-Set value of @var{var} to @var{val}. See @samp{q} for a discussing of
-naming conventions.
+@menu
+* VxWorks Connection:: Connecting to VxWorks
+* VxWorks Download:: VxWorks download
+* VxWorks Attach:: Running tasks
+@end menu
-@item reset @strong{(deprecated)}
-@tab @code{r}
-@tab
-Reset the entire system.
+@node VxWorks Connection
+@subsubsection Connecting to VxWorks
-@item remote restart
-@tab @code{R}@var{XX}
-@tab
-Restart the program being debugged. @var{XX}, while needed, is ignored.
-This packet is only available in extended mode.
-@item
-@tab
-no reply
-@tab
-The @samp{R} packet has no reply.
+The @value{GDBN} command @code{target} lets you connect to a VxWorks target on the
+network. To connect to a target whose host name is ``@code{tt}'', type:
-@item step
-@tab @code{s}@var{addr}
-@tab
-@var{addr} is address to resume. If @var{addr} is omitted, resume at
-same address.
-@item
-@tab reply
-@tab see below
+@example
+(vxgdb) target vxworks tt
+@end example
-@item step with signal
-@tab @code{S}@var{sig}@code{;}@var{addr}
-@tab
-Like @samp{C} but step not continue.
-@item
-@tab reply
-@tab see below
+@need 750
+@value{GDBN} displays messages like these:
-@item search
-@tab @code{t}@var{addr}@code{:}@var{PP}@code{,}@var{MM}
-@tab
-Search backwards starting at address @var{addr} for a match with pattern
-@var{PP} and mask @var{MM}. @var{PP} and @var{MM} are 4
-bytes. @var{addr} must be at least 3 digits.
+@smallexample
+Attaching remote machine across net...
+Connected to tt.
+@end smallexample
-@item thread alive
-@tab @code{T}@var{XX}
-@tab Find out if the thread XX is alive.
-@item
-@tab reply @code{OK}
-@tab thread is still alive
-@item
-@tab reply @code{E}@var{NN}
-@tab thread is dead
+@need 1000
+@value{GDBN} then attempts to read the symbol tables of any object modules
+loaded into the VxWorks target since it was last booted. @value{GDBN} locates
+these files by searching the directories listed in the command search
+path (@pxref{Environment, ,Your program's environment}); if it fails
+to find an object file, it displays a message such as:
-@item reserved
-@tab @code{u}
-@tab Reserved for future use
+@example
+prog.o: No such file or directory.
+@end example
-@item reserved
-@tab @code{U}
-@tab Reserved for future use
+When this happens, add the appropriate directory to the search path with
+the @value{GDBN} command @code{path}, and execute the @code{target}
+command again.
-@item reserved
-@tab @code{v}
-@tab Reserved for future use
+@node VxWorks Download
+@subsubsection VxWorks download
-@item reserved
-@tab @code{V}
-@tab Reserved for future use
+@cindex download to VxWorks
+If you have connected to the VxWorks target and you want to debug an
+object that has not yet been loaded, you can use the @value{GDBN}
+@code{load} command to download a file from Unix to VxWorks
+incrementally. The object file given as an argument to the @code{load}
+command is actually opened twice: first by the VxWorks target in order
+to download the code, then by @value{GDBN} in order to read the symbol
+table. This can lead to problems if the current working directories on
+the two systems differ. If both systems have NFS mounted the same
+filesystems, you can avoid these problems by using absolute paths.
+Otherwise, it is simplest to set the working directory on both systems
+to the directory in which the object file resides, and then to reference
+the file by its name, without any path. For instance, a program
+@file{prog.o} may reside in @file{@var{vxpath}/vw/demo/rdb} in VxWorks
+and in @file{@var{hostpath}/vw/demo/rdb} on the host. To load this
+program, type this on VxWorks:
-@item reserved
-@tab @code{w}
-@tab Reserved for future use
+@example
+-> cd "@var{vxpath}/vw/demo/rdb"
+@end example
-@item reserved
-@tab @code{W}
-@tab Reserved for future use
+@noindent
+Then, in @value{GDBN}, type:
-@item reserved
-@tab @code{x}
-@tab Reserved for future use
+@example
+(vxgdb) cd @var{hostpath}/vw/demo/rdb
+(vxgdb) load prog.o
+@end example
-@item write mem (binary)
-@tab @code{X}@var{addr}@code{,}@var{length}@var{:}@var{XX...}
-@tab
-@var{addr} is address, @var{length} is number of bytes, @var{XX...} is
-binary data. The characters @code{$}, @code{#}, and @code{0x7d} are
-escaped using @code{0x7d}.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
+@value{GDBN} displays a response similar to this:
-@item reserved
-@tab @code{y}
-@tab Reserved for future use
+@smallexample
+Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
+@end smallexample
-@item reserved
-@tab @code{Y}
-@tab Reserved for future use
+You can also use the @code{load} command to reload an object module
+after editing and recompiling the corresponding source file. Note that
+this makes @value{GDBN} delete all currently-defined breakpoints,
+auto-displays, and convenience variables, and to clear the value
+history. (This is necessary in order to preserve the integrity of
+debugger's data structures that reference the target system's symbol
+table.)
-@item remove break or watchpoint @strong{(draft)}
-@tab @code{z}@var{t}@code{,}@var{addr}@code{,}@var{length}
-@tab
-See @samp{Z}.
-
-@item insert break or watchpoint @strong{(draft)}
-@tab @code{Z}@var{t}@code{,}@var{addr}@code{,}@var{length}
-@tab
-@var{t} is type: @samp{0} - software breakpoint, @samp{1} - hardware
-breakpoint, @samp{2} - write watchpoint, @samp{3} - read watchpoint,
-@samp{4} - access watchpoint; @var{addr} is address; @var{length} is in
-bytes. For a software breakpoint, @var{length} specifies the size of
-the instruction to be patched. For hardware breakpoints and watchpoints
-@var{length} specifies the memory region to be monitored. To avoid
-potential problems with duplicate packets, the operations should be
-implemented in an idempotent way.
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab @samp{}
-@tab If not supported.
-
-@item reserved
-@tab <other>
-@tab Reserved for future use
-
-@end multitable
-
-The @samp{C}, @samp{c}, @samp{S}, @samp{s} and @samp{?} packets can
-receive any of the below as a reply. In the case of the @samp{C},
-@samp{c}, @samp{S} and @samp{s} packets, that reply is only returned
-when the target halts. In the below the exact meaning of @samp{signal
-number} is poorly defined. In general one of the UNIX signal numbering
-conventions is used.
-
-@multitable @columnfractions .4 .6
-
-@item @code{S}@var{AA}
-@tab @var{AA} is the signal number
-
-@item @code{T}@var{AA}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}
-@tab
-@var{AA} = two hex digit signal number; @var{n...} = register number
-(hex), @var{r...} = target byte ordered register contents, size defined
-by @code{REGISTER_RAW_SIZE}; @var{n...} = @samp{thread}, @var{r...} =
-thread process ID, this is a hex integer; @var{n...} = other string not
-starting with valid hex digit. @value{GDBN} should ignore this
-@var{n...}, @var{r...} pair and go on to the next. This way we can
-extend the protocol.
-
-@item @code{W}@var{AA}
-@tab
-The process exited, and @var{AA} is the exit status. This is only
-applicable for certains sorts of targets.
-
-@item @code{X}@var{AA}
-@tab
-The process terminated with signal @var{AA}.
-
-@item @code{N}@var{AA}@code{;}@var{t...}@code{;}@var{d...}@code{;}@var{b...} @strong{(obsolete)}
-@tab
-@var{AA} = signal number; @var{t...} = address of symbol "_start";
-@var{d...} = base of data section; @var{b...} = base of bss section.
-@emph{Note: only used by Cisco Systems targets. The difference between
-this reply and the "qOffsets" query is that the 'N' packet may arrive
-spontaneously whereas the 'qOffsets' is a query initiated by the host
-debugger.}
-
-@item @code{O}@var{XX...}
-@tab
-@var{XX...} is hex encoding of @sc{ascii} data. This can happen at any time
-while the program is running and the debugger should continue to wait
-for 'W', 'T', etc.
-
-@end multitable
-
-The following set and query packets have already been defined.
-
-@multitable @columnfractions .2 .2 .6
-
-@item current thread
-@tab @code{q}@code{C}
-@tab Return the current thread id.
-@item
-@tab reply @code{QC}@var{pid}
-@tab
-Where @var{pid} is a HEX encoded 16 bit process id.
-@item
-@tab reply *
-@tab Any other reply implies the old pid.
-
-@item all thread ids
-@tab @code{q}@code{fThreadInfo}
-@item
-@tab @code{q}@code{sThreadInfo}
-@tab
-Obtain a list of active thread ids from the target (OS). Since there
-may be too many active threads to fit into one reply packet, this query
-works iteratively: it may require more than one query/reply sequence to
-obtain the entire list of threads. The first query of the sequence will
-be the @code{qf}@code{ThreadInfo} query; subsequent queries in the
-sequence will be the @code{qs}@code{ThreadInfo} query.
-@item
-@tab
-@tab NOTE: replaces the @code{qL} query (see below).
-@item
-@tab reply @code{m}@var{<id>}
-@tab A single thread id
-@item
-@tab reply @code{m}@var{<id>},@var{<id>...}
-@tab a comma-separated list of thread ids
-@item
-@tab reply @code{l}
-@tab (lower case 'el') denotes end of list.
-@item
-@tab
-@tab
-In response to each query, the target will reply with a list of one
-or more thread ids, in big-endian hex, separated by commas. GDB will
-respond to each reply with a request for more thread ids (using the
-@code{qs} form of the query), until the target responds with @code{l}
-(lower-case el, for @code{'last'}).
-
-@item extra thread info
-@tab @code{q}@code{ThreadExtraInfo}@code{,}@var{id}
-@tab
-@item
-@tab
-@tab
-Where @var{<id>} is a thread-id in big-endian hex.
-Obtain a printable string description of a thread's attributes from
-the target OS. This string may contain anything that the target OS
-thinks is interesting for @value{GDBN} to tell the user about the thread.
-The string is displayed in @value{GDBN}'s @samp{info threads} display.
-Some examples of possible thread extra info strings are "Runnable", or
-"Blocked on Mutex".
-@item
-@tab reply @var{XX...}
-@tab
-Where @var{XX...} is a hex encoding of @sc{ascii} data, comprising the
-printable string containing the extra information about the thread's
-attributes.
-
-@item query @var{LIST} or @var{threadLIST} @strong{(deprecated)}
-@tab @code{q}@code{L}@var{startflag}@var{threadcount}@var{nextthread}
-@tab
-@item
-@tab
-@tab
-Obtain thread information from RTOS. Where: @var{startflag} (one hex
-digit) is one to indicate the first query and zero to indicate a
-subsequent query; @var{threadcount} (two hex digits) is the maximum
-number of threads the response packet can contain; and @var{nextthread}
-(eight hex digits), for subsequent queries (@var{startflag} is zero), is
-returned in the response as @var{argthread}.
-@item
-@tab
-@tab NOTE: this query is replaced by the @code{q}@code{fThreadInfo}
-query (see above).
-@item
-@tab reply @code{q}@code{M}@var{count}@var{done}@var{argthread}@var{thread...}
-@tab
-@item
-@tab
-@tab
-Where: @var{count} (two hex digits) is the number of threads being
-returned; @var{done} (one hex digit) is zero to indicate more threads
-and one indicates no further threads; @var{argthreadid} (eight hex
-digits) is @var{nextthread} from the request packet; @var{thread...} is
-a sequence of thread IDs from the target. @var{threadid} (eight hex
-digits). See @code{remote.c:parse_threadlist_response()}.
-
-@item compute CRC of memory block
-@tab @code{q}@code{CRC:}@var{addr}@code{,}@var{length}
-@tab
-@item
-@tab reply @code{E}@var{NN}
-@tab An error (such as memory fault)
-@item
-@tab reply @code{C}@var{CRC32}
-@tab A 32 bit cyclic redundancy check of the specified memory region.
-
-@item query sect offs
-@tab @code{q}@code{Offsets}
-@tab
-Get section offsets that the target used when re-locating the downloaded
-image. @emph{Note: while a @code{Bss} offset is included in the
-response, @value{GDBN} ignores this and instead applies the @code{Data}
-offset to the @code{Bss} section.}
-@item
-@tab reply @code{Text=}@var{xxx}@code{;Data=}@var{yyy}@code{;Bss=}@var{zzz}
-
-@item thread info request
-@tab @code{q}@code{P}@var{mode}@var{threadid}
-@tab
-@item
-@tab
-@tab
-Returns information on @var{threadid}. Where: @var{mode} is a hex
-encoded 32 bit mode; @var{threadid} is a hex encoded 64 bit thread ID.
-@item
-@tab reply *
-@tab
-See @code{remote.c:remote_unpack_thread_info_response()}.
-
-@item remote command
-@tab @code{q}@code{Rcmd,}@var{COMMAND}
-@tab
-@item
-@tab
-@tab
-@var{COMMAND} (hex encoded) is passed to the local interpreter for
-execution. Invalid commands should be reported using the output string.
-Before the final result packet, the target may also respond with a
-number of intermediate @code{O}@var{OUTPUT} console output
-packets. @emph{Implementors should note that providing access to a
-stubs's interpreter may have security implications}.
-@item
-@tab reply @code{OK}
-@tab
-A command response with no output.
-@item
-@tab reply @var{OUTPUT}
-@tab
-A command response with the hex encoded output string @var{OUTPUT}.
-@item
-@tab reply @code{E}@var{NN}
-@tab
-Indicate a badly formed request.
-
-@item
-@tab reply @samp{}
-@tab
-When @samp{q}@samp{Rcmd} is not recognized.
-
-@item symbol lookup
-@tab @code{qSymbol::}
-@tab
-Notify the target that @value{GDBN} is prepared to serve symbol lookup
-requests. Accept requests from the target for the values of symbols.
-@item
-@tab
-@tab
-@item
-@tab reply @code{OK}
-@tab
-The target does not need to look up any (more) symbols.
-@item
-@tab reply @code{qSymbol:}@var{sym_name}
-@tab
-@sp 2
-@noindent
-The target requests the value of symbol @var{sym_name} (hex encoded).
-@value{GDBN} may provide the value by using the
-@code{qSymbol:}@var{sym_value}:@var{sym_name}
-message, described below.
-
-@item symbol value
-@tab @code{qSymbol:}@var{sym_value}:@var{sym_name}
-@tab
-@sp 1
-@noindent
-Set the value of SYM_NAME to SYM_VALUE.
-@item
-@tab
-@tab
-@var{sym_name} (hex encoded) is the name of a symbol whose value
-the target has previously requested.
-@item
-@tab
-@tab
-@var{sym_value} (hex) is the value for symbol @var{sym_name}.
-If @value{GDBN} cannot supply a value for @var{sym_name}, then this
-field will be empty.
-@item
-@tab reply @code{OK}
-@tab
-The target does not need to look up any (more) symbols.
-@item
-@tab reply @code{qSymbol:}@var{sym_name}
-@tab
-@sp 2
-@noindent
-The target requests the value of a new symbol @var{sym_name} (hex encoded).
-@value{GDBN} will continue to supply the values of symbols (if available),
-until the target ceases to request them.
-
-@end multitable
-
-The following @samp{g}/@samp{G} packets have previously been defined.
-In the below, some thirty-two bit registers are transferred as sixty-four
-bits. Those registers should be zero/sign extended (which?) to fill the
-space allocated. Register bytes are transfered in target byte order.
-The two nibbles within a register byte are transfered most-significant -
-least-significant.
-
-@multitable @columnfractions .5 .5
-
-@item MIPS32
-@tab
-All registers are transfered as thirty-two bit quantities in the order:
-32 general-purpose; sr; lo; hi; bad; cause; pc; 32 floating-point
-registers; fsr; fir; fp.
-
-@item MIPS64
-@tab
-All registers are transfered as sixty-four bit quantities (including
-thirty-two bit registers such as @code{sr}). The ordering is the same
-as @code{MIPS32}.
-
-@end multitable
-
-Example sequence of a target being re-started. Notice how the restart
-does not get any direct output:
-
-@example
-<- @code{R00}
--> @code{+}
-@emph{target restarts}
-<- @code{?}
--> @code{+}
--> @code{T001:1234123412341234}
-<- @code{+}
-@end example
-
-Example sequence of a target being stepped by a single instruction:
-
-@example
-<- @code{G1445...}
--> @code{+}
-<- @code{s}
--> @code{+}
-@emph{time passes}
--> @code{T001:1234123412341234}
-<- @code{+}
-<- @code{g}
--> @code{+}
--> @code{1455...}
-<- @code{+}
-@end example
-
-
-@node Configurations
-@chapter Configuration-Specific Information
-
-While nearly all @value{GDBN} commands are available for all native and
-cross versions of the debugger, there are some exceptions. This chapter
-describes things that are only available in certain configurations.
-
-There are three major categories of configurations: native
-configurations, where the host and target are the same, embedded
-operating system configurations, which are usually the same for several
-different processor architectures, and bare embedded processors, which
-are quite different from each other.
-
-@menu
-* Native::
-* Embedded OS::
-* Embedded Processors::
-* Architectures::
-@end menu
-
-@node Native
-@section Native
-
-This section describes details specific to particular native
-configurations.
-
-@menu
-* HP-UX:: HP-UX
-* SVR4 Process Information:: SVR4 process information
-* DJGPP Native:: Features specific to the DJGPP port
-@end menu
-
-@node HP-UX
-@subsection HP-UX
-
-On HP-UX systems, if you refer to a function or variable name that
-begins with a dollar sign, @value{GDBN} searches for a user or system
-name first, before it searches for a convenience variable.
-
-@node SVR4 Process Information
-@subsection SVR4 process information
-
-@kindex /proc
-@cindex process image
-
-Many versions of SVR4 provide a facility called @samp{/proc} that can be
-used to examine the image of a running process using file-system
-subroutines. If @value{GDBN} is configured for an operating system with
-this facility, the command @code{info proc} is available to report on
-several kinds of information about the process running your program.
-@code{info proc} works only on SVR4 systems that include the
-@code{procfs} code. This includes OSF/1 (Digital Unix), Solaris, Irix,
-and Unixware, but not HP-UX or Linux, for example.
-
-@table @code
-@kindex info proc
-@item info proc
-Summarize available information about the process.
-
-@kindex info proc mappings
-@item info proc mappings
-Report on the address ranges accessible in the program, with information
-on whether your program may read, write, or execute each range.
-@ignore
-@comment These sub-options of 'info proc' were not included when
-@comment procfs.c was re-written. Keep their descriptions around
-@comment against the day when someone finds the time to put them back in.
-@kindex info proc times
-@item info proc times
-Starting time, user CPU time, and system CPU time for your program and
-its children.
-
-@kindex info proc id
-@item info proc id
-Report on the process IDs related to your program: its own process ID,
-the ID of its parent, the process group ID, and the session ID.
-
-@kindex info proc status
-@item info proc status
-General information on the state of the process. If the process is
-stopped, this report includes the reason for stopping, and any signal
-received.
-
-@item info proc all
-Show all the above information about the process.
-@end ignore
-@end table
-
-@node DJGPP Native
-@subsection Features for Debugging @sc{djgpp} Programs
-@cindex @sc{djgpp} debugging
-@cindex native @sc{djgpp} debugging
-@cindex MS-DOS-specific commands
-
-@sc{djgpp} is the port of @sc{gnu} development tools to MS-DOS and
-MS-Windows. @sc{djgpp} programs are 32-bit protected-mode programs
-that use the @dfn{DPMI} (DOS Protected-Mode Interface) API to run on
-top of real-mode DOS systems and their emulations.
-
-@value{GDBN} supports native debugging of @sc{djgpp} programs, and
-defines a few commands specific to the @sc{djgpp} port. This
-subsection describes those commands.
-
-@table @code
-@kindex info dos
-@item info dos
-This is a prefix of @sc{djgpp}-specific commands which print
-information about the target system and important OS structures.
-
-@kindex sysinfo
-@cindex MS-DOS system info
-@cindex free memory information (MS-DOS)
-@item info dos sysinfo
-This command displays assorted information about the underlying
-platform: the CPU type and features, the OS version and flavor, the
-DPMI version, and the available conventional and DPMI memory.
-
-@cindex GDT
-@cindex LDT
-@cindex IDT
-@cindex segment descriptor tables
-@cindex descriptor tables display
-@item info dos gdt
-@itemx info dos ldt
-@itemx info dos idt
-These 3 commands display entries from, respectively, Global, Local,
-and Interrupt Descriptor Tables (GDT, LDT, and IDT). The descriptor
-tables are data structures which store a descriptor for each segment
-that is currently in use. The segment's selector is an index into a
-descriptor table; the table entry for that index holds the
-descriptor's base address and limit, and its attributes and access
-rights.
-
-A typical @sc{djgpp} program uses 3 segments: a code segment, a data
-segment (used for both data and the stack), and a DOS segment (which
-allows access to DOS/BIOS data structures and absolute addresses in
-conventional memory). However, the DPMI host will usually define
-additional segments in order to support the DPMI environment.
-
-@cindex garbled pointers
-These commands allow to display entries from the descriptor tables.
-Without an argument, all entries from the specified table are
-displayed. An argument, which should be an integer expression, means
-display a single entry whose index is given by the argument. For
-example, here's a convenient way to display information about the
-debugged program's data segment:
-
-@smallexample
-@exdent @code{(@value{GDBP}) info dos ldt $ds}
-@exdent @code{0x13f: base=0x11970000 limit=0x0009ffff 32-Bit Data (Read/Write, Exp-up)}
-@end smallexample
-
-@noindent
-This comes in handy when you want to see whether a pointer is outside
-the data segment's limit (i.e.@: @dfn{garbled}).
-
-@cindex page tables display (MS-DOS)
-@item info dos pde
-@itemx info dos pte
-These two commands display entries from, respectively, the Page
-Directory and the Page Tables. Page Directories and Page Tables are
-data structures which control how virtual memory addresses are mapped
-into physical addresses. A Page Table includes an entry for every
-page of memory that is mapped into the program's address space; there
-may be several Page Tables, each one holding up to 4096 entries. A
-Page Directory has up to 4096 entries, one each for every Page Table
-that is currently in use.
-
-Without an argument, @kbd{info dos pde} displays the entire Page
-Directory, and @kbd{info dos pte} displays all the entries in all of
-the Page Tables. An argument, an integer expression, given to the
-@kbd{info dos pde} command means display only that entry from the Page
-Directory table. An argument given to the @kbd{info dos pte} command
-means display entries from a single Page Table, the one pointed to by
-the specified entry in the Page Directory.
-
-@cindex direct memory access (DMA) on MS-DOS
-These commands are useful when your program uses @dfn{DMA} (Direct
-Memory Access), which needs physical addresses to program the DMA
-controller.
-
-These commands are supported only with some DPMI servers.
-
-@cindex physical address from linear address
-@item info dos address-pte @var{addr}
-This command displays the Page Table entry for a specified linear
-address. The argument linear address @var{addr} should already have the
-appropriate segment's base address added to it, because this command
-accepts addresses which may belong to @emph{any} segment. For
-example, here's how to display the Page Table entry for the page where
-the variable @code{i} is stored:
-
-@smallexample
-@exdent @code{(@value{GDBP}) info dos address-pte __djgpp_base_address + (char *)&i}
-@exdent @code{Page Table entry for address 0x11a00d30:}
-@exdent @code{Base=0x02698000 Dirty Acc. Not-Cached Write-Back Usr Read-Write +0xd30}
-@end smallexample
-
-@noindent
-This says that @code{i} is stored at offset @code{0xd30} from the page
-whose physical base address is @code{0x02698000}, and prints all the
-attributes of that page.
-
-Note that you must cast the addresses of variables to a @code{char *},
-since otherwise the value of @code{__djgpp_base_address}, the base
-address of all variables and functions in a @sc{djgpp} program, will
-be added using the rules of C pointer arithmetics: if @code{i} is
-declared an @code{int}, @value{GDBN} will add 4 times the value of
-@code{__djgpp_base_address} to the address of @code{i}.
-
-Here's another example, it displays the Page Table entry for the
-transfer buffer:
-
-@smallexample
-@exdent @code{(@value{GDBP}) info dos address-pte *((unsigned *)&_go32_info_block + 3)}
-@exdent @code{Page Table entry for address 0x29110:}
-@exdent @code{Base=0x00029000 Dirty Acc. Not-Cached Write-Back Usr Read-Write +0x110}
-@end smallexample
-
-@noindent
-(The @code{+ 3} offset is because the transfer buffer's address is the
-3rd member of the @code{_go32_info_block} structure.) The output of
-this command clearly shows that addresses in conventional memory are
-mapped 1:1, i.e.@: the physical and linear addresses are identical.
-
-This command is supported only with some DPMI servers.
-@end table
-
-@node Embedded OS
-@section Embedded Operating Systems
-
-This section describes configurations involving the debugging of
-embedded operating systems that are available for several different
-architectures.
-
-@menu
-* VxWorks:: Using @value{GDBN} with VxWorks
-@end menu
-
-@value{GDBN} includes the ability to debug programs running on
-various real-time operating systems.
-
-@node VxWorks
-@subsection Using @value{GDBN} with VxWorks
-
-@cindex VxWorks
-
-@table @code
-
-@kindex target vxworks
-@item target vxworks @var{machinename}
-A VxWorks system, attached via TCP/IP. The argument @var{machinename}
-is the target system's machine name or IP address.
-
-@end table
-
-On VxWorks, @code{load} links @var{filename} dynamically on the
-current target system as well as adding its symbols in @value{GDBN}.
-
-@value{GDBN} enables developers to spawn and debug tasks running on networked
-VxWorks targets from a Unix host. Already-running tasks spawned from
-the VxWorks shell can also be debugged. @value{GDBN} uses code that runs on
-both the Unix host and on the VxWorks target. The program
-@code{@value{GDBP}} is installed and executed on the Unix host. (It may be
-installed with the name @code{vxgdb}, to distinguish it from a
-@value{GDBN} for debugging programs on the host itself.)
-
-@table @code
-@item VxWorks-timeout @var{args}
-@kindex vxworks-timeout
-All VxWorks-based targets now support the option @code{vxworks-timeout}.
-This option is set by the user, and @var{args} represents the number of
-seconds @value{GDBN} waits for responses to rpc's. You might use this if
-your VxWorks target is a slow software simulator or is on the far side
-of a thin network line.
-@end table
-
-The following information on connecting to VxWorks was current when
-this manual was produced; newer releases of VxWorks may use revised
-procedures.
-
-@kindex INCLUDE_RDB
-To use @value{GDBN} with VxWorks, you must rebuild your VxWorks kernel
-to include the remote debugging interface routines in the VxWorks
-library @file{rdb.a}. To do this, define @code{INCLUDE_RDB} in the
-VxWorks configuration file @file{configAll.h} and rebuild your VxWorks
-kernel. The resulting kernel contains @file{rdb.a}, and spawns the
-source debugging task @code{tRdbTask} when VxWorks is booted. For more
-information on configuring and remaking VxWorks, see the manufacturer's
-manual.
-@c VxWorks, see the @cite{VxWorks Programmer's Guide}.
-
-Once you have included @file{rdb.a} in your VxWorks system image and set
-your Unix execution search path to find @value{GDBN}, you are ready to
-run @value{GDBN}. From your Unix host, run @code{@value{GDBP}} (or
-@code{vxgdb}, depending on your installation).
-
-@value{GDBN} comes up showing the prompt:
-
-@example
-(vxgdb)
-@end example
-
-@menu
-* VxWorks Connection:: Connecting to VxWorks
-* VxWorks Download:: VxWorks download
-* VxWorks Attach:: Running tasks
-@end menu
-
-@node VxWorks Connection
-@subsubsection Connecting to VxWorks
-
-The @value{GDBN} command @code{target} lets you connect to a VxWorks target on the
-network. To connect to a target whose host name is ``@code{tt}'', type:
-
-@example
-(vxgdb) target vxworks tt
-@end example
-
-@need 750
-@value{GDBN} displays messages like these:
-
-@smallexample
-Attaching remote machine across net...
-Connected to tt.
-@end smallexample
-
-@need 1000
-@value{GDBN} then attempts to read the symbol tables of any object modules
-loaded into the VxWorks target since it was last booted. @value{GDBN} locates
-these files by searching the directories listed in the command search
-path (@pxref{Environment, ,Your program's environment}); if it fails
-to find an object file, it displays a message such as:
-
-@example
-prog.o: No such file or directory.
-@end example
-
-When this happens, add the appropriate directory to the search path with
-the @value{GDBN} command @code{path}, and execute the @code{target}
-command again.
-
-@node VxWorks Download
-@subsubsection VxWorks download
-
-@cindex download to VxWorks
-If you have connected to the VxWorks target and you want to debug an
-object that has not yet been loaded, you can use the @value{GDBN}
-@code{load} command to download a file from Unix to VxWorks
-incrementally. The object file given as an argument to the @code{load}
-command is actually opened twice: first by the VxWorks target in order
-to download the code, then by @value{GDBN} in order to read the symbol
-table. This can lead to problems if the current working directories on
-the two systems differ. If both systems have NFS mounted the same
-filesystems, you can avoid these problems by using absolute paths.
-Otherwise, it is simplest to set the working directory on both systems
-to the directory in which the object file resides, and then to reference
-the file by its name, without any path. For instance, a program
-@file{prog.o} may reside in @file{@var{vxpath}/vw/demo/rdb} in VxWorks
-and in @file{@var{hostpath}/vw/demo/rdb} on the host. To load this
-program, type this on VxWorks:
-
-@example
--> cd "@var{vxpath}/vw/demo/rdb"
-@end example
-
-@noindent
-Then, in @value{GDBN}, type:
-
-@example
-(vxgdb) cd @var{hostpath}/vw/demo/rdb
-(vxgdb) load prog.o
-@end example
-
-@value{GDBN} displays a response similar to this:
-
-@smallexample
-Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
-@end smallexample
-
-You can also use the @code{load} command to reload an object module
-after editing and recompiling the corresponding source file. Note that
-this makes @value{GDBN} delete all currently-defined breakpoints,
-auto-displays, and convenience variables, and to clear the value
-history. (This is necessary in order to preserve the integrity of
-debugger's data structures that reference the target system's symbol
-table.)
-
-@node VxWorks Attach
-@subsubsection Running tasks
+@node VxWorks Attach
+@subsubsection Running tasks
@cindex running VxWorks tasks
You can also attach to an existing task using the @code{attach} command as
@table @code
-@kindex target rdi
-@item target rdi @var{dev}
-ARM Angel monitor, via RDI library interface to ADP protocol. You may
-use this target to communicate with both boards running the Angel
-monitor, or with the EmbeddedICE JTAG debug device.
-
-@kindex target rdp
-@item target rdp @var{dev}
-ARM Demon monitor.
+@kindex target rdi
+@item target rdi @var{dev}
+ARM Angel monitor, via RDI library interface to ADP protocol. You may
+use this target to communicate with both boards running the Angel
+monitor, or with the EmbeddedICE JTAG debug device.
+
+@kindex target rdp
+@item target rdp @var{dev}
+ARM Demon monitor.
+
+@end table
+
+@node H8/300
+@subsection Hitachi H8/300
+
+@table @code
+
+@kindex target hms@r{, with H8/300}
+@item target hms @var{dev}
+A Hitachi SH, H8/300, or H8/500 board, attached via serial line to your host.
+Use special commands @code{device} and @code{speed} to control the serial
+line and the communications speed used.
+
+@kindex target e7000@r{, with H8/300}
+@item target e7000 @var{dev}
+E7000 emulator for Hitachi H8 and SH.
+
+@kindex target sh3@r{, with H8/300}
+@kindex target sh3e@r{, with H8/300}
+@item target sh3 @var{dev}
+@itemx target sh3e @var{dev}
+Hitachi SH-3 and SH-3E target systems.
+
+@end table
+
+@cindex download to H8/300 or H8/500
+@cindex H8/300 or H8/500 download
+@cindex download to Hitachi SH
+@cindex Hitachi SH download
+When you select remote debugging to a Hitachi SH, H8/300, or H8/500
+board, the @code{load} command downloads your program to the Hitachi
+board and also opens it as the current executable target for
+@value{GDBN} on your host (like the @code{file} command).
+
+@value{GDBN} needs to know these things to talk to your
+Hitachi SH, H8/300, or H8/500:
+
+@enumerate
+@item
+that you want to use @samp{target hms}, the remote debugging interface
+for Hitachi microprocessors, or @samp{target e7000}, the in-circuit
+emulator for the Hitachi SH and the Hitachi 300H. (@samp{target hms} is
+the default when @value{GDBN} is configured specifically for the Hitachi SH,
+H8/300, or H8/500.)
+
+@item
+what serial device connects your host to your Hitachi board (the first
+serial device available on your host is the default).
+
+@item
+what speed to use over the serial device.
+@end enumerate
+
+@menu
+* Hitachi Boards:: Connecting to Hitachi boards.
+* Hitachi ICE:: Using the E7000 In-Circuit Emulator.
+* Hitachi Special:: Special @value{GDBN} commands for Hitachi micros.
+@end menu
+
+@node Hitachi Boards
+@subsubsection Connecting to Hitachi boards
+
+@c only for Unix hosts
+@kindex device
+@cindex serial device, Hitachi micros
+Use the special @code{@value{GDBN}} command @samp{device @var{port}} if you
+need to explicitly set the serial device. The default @var{port} is the
+first available port on your host. This is only necessary on Unix
+hosts, where it is typically something like @file{/dev/ttya}.
+
+@kindex speed
+@cindex serial line speed, Hitachi micros
+@code{@value{GDBN}} has another special command to set the communications
+speed: @samp{speed @var{bps}}. This command also is only used from Unix
+hosts; on DOS hosts, set the line speed as usual from outside @value{GDBN} with
+the DOS @code{mode} command (for instance,
+@w{@kbd{mode com2:9600,n,8,1,p}} for a 9600@dmn{bps} connection).
+
+The @samp{device} and @samp{speed} commands are available only when you
+use a Unix host to debug your Hitachi microprocessor programs. If you
+use a DOS host,
+@value{GDBN} depends on an auxiliary terminate-and-stay-resident program
+called @code{asynctsr} to communicate with the development board
+through a PC serial port. You must also use the DOS @code{mode} command
+to set up the serial port on the DOS side.
+
+The following sample session illustrates the steps needed to start a
+program under @value{GDBN} control on an H8/300. The example uses a
+sample H8/300 program called @file{t.x}. The procedure is the same for
+the Hitachi SH and the H8/500.
+
+First hook up your development board. In this example, we use a
+board attached to serial port @code{COM2}; if you use a different serial
+port, substitute its name in the argument of the @code{mode} command.
+When you call @code{asynctsr}, the auxiliary comms program used by the
+debugger, you give it just the numeric part of the serial port's name;
+for example, @samp{asyncstr 2} below runs @code{asyncstr} on
+@code{COM2}.
+
+@example
+C:\H8300\TEST> asynctsr 2
+C:\H8300\TEST> mode com2:9600,n,8,1,p
+
+Resident portion of MODE loaded
+
+COM2: 9600, n, 8, 1, p
+
+@end example
+
+@quotation
+@emph{Warning:} We have noticed a bug in PC-NFS that conflicts with
+@code{asynctsr}. If you also run PC-NFS on your DOS host, you may need to
+disable it, or even boot without it, to use @code{asynctsr} to control
+your development board.
+@end quotation
+
+@kindex target hms@r{, and serial protocol}
+Now that serial communications are set up, and the development board is
+connected, you can start up @value{GDBN}. Call @code{@value{GDBP}} with
+the name of your program as the argument. @code{@value{GDBN}} prompts
+you, as usual, with the prompt @samp{(@value{GDBP})}. Use two special
+commands to begin your debugging session: @samp{target hms} to specify
+cross-debugging to the Hitachi board, and the @code{load} command to
+download your program to the board. @code{load} displays the names of
+the program's sections, and a @samp{*} for each 2K of data downloaded.
+(If you want to refresh @value{GDBN} data on symbols or on the
+executable file without downloading, use the @value{GDBN} commands
+@code{file} or @code{symbol-file}. These commands, and @code{load}
+itself, are described in @ref{Files,,Commands to specify files}.)
+
+@smallexample
+(eg-C:\H8300\TEST) @value{GDBP} t.x
+@value{GDBN} is free software and you are welcome to distribute copies
+ of it under certain conditions; type "show copying" to see
+ the conditions.
+There is absolutely no warranty for @value{GDBN}; type "show warranty"
+for details.
+@value{GDBN} @value{GDBVN}, Copyright 1992 Free Software Foundation, Inc...
+(@value{GDBP}) target hms
+Connected to remote H8/300 HMS system.
+(@value{GDBP}) load t.x
+.text : 0x8000 .. 0xabde ***********
+.data : 0xabde .. 0xad30 *
+.stack : 0xf000 .. 0xf014 *
+@end smallexample
+
+At this point, you're ready to run or debug your program. From here on,
+you can use all the usual @value{GDBN} commands. The @code{break} command
+sets breakpoints; the @code{run} command starts your program;
+@code{print} or @code{x} display data; the @code{continue} command
+resumes execution after stopping at a breakpoint. You can use the
+@code{help} command at any time to find out more about @value{GDBN} commands.
+
+Remember, however, that @emph{operating system} facilities aren't
+available on your development board; for example, if your program hangs,
+you can't send an interrupt---but you can press the @sc{reset} switch!
+
+Use the @sc{reset} button on the development board
+@itemize @bullet
+@item
+to interrupt your program (don't use @kbd{ctl-C} on the DOS host---it has
+no way to pass an interrupt signal to the development board); and
+
+@item
+to return to the @value{GDBN} command prompt after your program finishes
+normally. The communications protocol provides no other way for @value{GDBN}
+to detect program completion.
+@end itemize
+
+In either case, @value{GDBN} sees the effect of a @sc{reset} on the
+development board as a ``normal exit'' of your program.
+
+@node Hitachi ICE
+@subsubsection Using the E7000 in-circuit emulator
+
+@kindex target e7000@r{, with Hitachi ICE}
+You can use the E7000 in-circuit emulator to develop code for either the
+Hitachi SH or the H8/300H. Use one of these forms of the @samp{target
+e7000} command to connect @value{GDBN} to your E7000:
+
+@table @code
+@item target e7000 @var{port} @var{speed}
+Use this form if your E7000 is connected to a serial port. The
+@var{port} argument identifies what serial port to use (for example,
+@samp{com2}). The third argument is the line speed in bits per second
+(for example, @samp{9600}).
+
+@item target e7000 @var{hostname}
+If your E7000 is installed as a host on a TCP/IP network, you can just
+specify its hostname; @value{GDBN} uses @code{telnet} to connect.
+@end table
+
+@node Hitachi Special
+@subsubsection Special @value{GDBN} commands for Hitachi micros
+
+Some @value{GDBN} commands are available only for the H8/300:
+
+@table @code
+
+@kindex set machine
+@kindex show machine
+@item set machine h8300
+@itemx set machine h8300h
+Condition @value{GDBN} for one of the two variants of the H8/300
+architecture with @samp{set machine}. You can use @samp{show machine}
+to check which variant is currently in effect.
@end table
-@node H8/300
-@subsection Hitachi H8/300
+@node H8/500
+@subsection H8/500
@table @code
-@kindex target hms@r{, with H8/300}
-@item target hms @var{dev}
-A Hitachi SH, H8/300, or H8/500 board, attached via serial line to your host.
-Use special commands @code{device} and @code{speed} to control the serial
-line and the communications speed used.
+@kindex set memory @var{mod}
+@cindex memory models, H8/500
+@item set memory @var{mod}
+@itemx show memory
+Specify which H8/500 memory model (@var{mod}) you are using with
+@samp{set memory}; check which memory model is in effect with @samp{show
+memory}. The accepted values for @var{mod} are @code{small},
+@code{big}, @code{medium}, and @code{compact}.
-@kindex target e7000@r{, with H8/300}
-@item target e7000 @var{dev}
-E7000 emulator for Hitachi H8 and SH.
+@end table
-@kindex target sh3@r{, with H8/300}
-@kindex target sh3e@r{, with H8/300}
-@item target sh3 @var{dev}
-@itemx target sh3e @var{dev}
-Hitachi SH-3 and SH-3E target systems.
+@node i960
+@subsection Intel i960
-@end table
+@table @code
-@cindex download to H8/300 or H8/500
-@cindex H8/300 or H8/500 download
-@cindex download to Hitachi SH
-@cindex Hitachi SH download
-When you select remote debugging to a Hitachi SH, H8/300, or H8/500
-board, the @code{load} command downloads your program to the Hitachi
-board and also opens it as the current executable target for
-@value{GDBN} on your host (like the @code{file} command).
+@kindex target mon960
+@item target mon960 @var{dev}
+MON960 monitor for Intel i960.
-@value{GDBN} needs to know these things to talk to your
-Hitachi SH, H8/300, or H8/500:
+@kindex target nindy
+@item target nindy @var{devicename}
+An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is
+the name of the serial device to use for the connection, e.g.
+@file{/dev/ttya}.
-@enumerate
+@end table
+
+@cindex Nindy
+@cindex i960
+@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems. When
+@value{GDBN} is configured to control a remote Intel 960 using Nindy, you can
+tell @value{GDBN} how to connect to the 960 in several ways:
+
+@itemize @bullet
@item
-that you want to use @samp{target hms}, the remote debugging interface
-for Hitachi microprocessors, or @samp{target e7000}, the in-circuit
-emulator for the Hitachi SH and the Hitachi 300H. (@samp{target hms} is
-the default when @value{GDBN} is configured specifically for the Hitachi SH,
-H8/300, or H8/500.)
+Through command line options specifying serial port, version of the
+Nindy protocol, and communications speed;
@item
-what serial device connects your host to your Hitachi board (the first
-serial device available on your host is the default).
+By responding to a prompt on startup;
@item
-what speed to use over the serial device.
-@end enumerate
+By using the @code{target} command at any point during your @value{GDBN}
+session. @xref{Target Commands, ,Commands for managing targets}.
+
+@end itemize
+
+@cindex download to Nindy-960
+With the Nindy interface to an Intel 960 board, @code{load}
+downloads @var{filename} to the 960 as well as adding its symbols in
+@value{GDBN}.
+
+@menu
+* Nindy Startup:: Startup with Nindy
+* Nindy Options:: Options for Nindy
+* Nindy Reset:: Nindy reset command
+@end menu
+
+@node Nindy Startup
+@subsubsection Startup with Nindy
+
+If you simply start @code{@value{GDBP}} without using any command-line
+options, you are prompted for what serial port to use, @emph{before} you
+reach the ordinary @value{GDBN} prompt:
+
+@example
+Attach /dev/ttyNN -- specify NN, or "quit" to quit:
+@end example
+
+@noindent
+Respond to the prompt with whatever suffix (after @samp{/dev/tty})
+identifies the serial port you want to use. You can, if you choose,
+simply start up with no Nindy connection by responding to the prompt
+with an empty line. If you do this and later wish to attach to Nindy,
+use @code{target} (@pxref{Target Commands, ,Commands for managing targets}).
+
+@node Nindy Options
+@subsubsection Options for Nindy
+
+These are the startup options for beginning your @value{GDBN} session with a
+Nindy-960 board attached:
+
+@table @code
+@item -r @var{port}
+Specify the serial port name of a serial interface to be used to connect
+to the target system. This option is only available when @value{GDBN} is
+configured for the Intel 960 target architecture. You may specify
+@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
+device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
+suffix for a specific @code{tty} (e.g. @samp{-r a}).
+
+@item -O
+(An uppercase letter ``O'', not a zero.) Specify that @value{GDBN} should use
+the ``old'' Nindy monitor protocol to connect to the target system.
+This option is only available when @value{GDBN} is configured for the Intel 960
+target architecture.
+
+@quotation
+@emph{Warning:} if you specify @samp{-O}, but are actually trying to
+connect to a target system that expects the newer protocol, the connection
+fails, appearing to be a speed mismatch. @value{GDBN} repeatedly
+attempts to reconnect at several different line speeds. You can abort
+this process with an interrupt.
+@end quotation
+
+@item -brk
+Specify that @value{GDBN} should first send a @code{BREAK} signal to the target
+system, in an attempt to reset it, before connecting to a Nindy target.
+
+@quotation
+@emph{Warning:} Many target systems do not have the hardware that this
+requires; it only works with a few boards.
+@end quotation
+@end table
+
+The standard @samp{-b} option controls the line speed used on the serial
+port.
+
+@c @group
+@node Nindy Reset
+@subsubsection Nindy reset command
+
+@table @code
+@item reset
+@kindex reset
+For a Nindy target, this command sends a ``break'' to the remote target
+system; this is only useful if the target has been equipped with a
+circuit to perform a hard reset (or some other interesting action) when
+a break is detected.
+@end table
+@c @end group
+
+@node M32R/D
+@subsection Mitsubishi M32R/D
+
+@table @code
+
+@kindex target m32r
+@item target m32r @var{dev}
+Mitsubishi M32R/D ROM monitor.
+
+@end table
+
+@node M68K
+@subsection M68k
+
+The Motorola m68k configuration includes ColdFire support, and
+target command for the following ROM monitors.
+
+@table @code
+
+@kindex target abug
+@item target abug @var{dev}
+ABug ROM monitor for M68K.
+
+@kindex target cpu32bug
+@item target cpu32bug @var{dev}
+CPU32BUG monitor, running on a CPU32 (M68K) board.
+
+@kindex target dbug
+@item target dbug @var{dev}
+dBUG ROM monitor for Motorola ColdFire.
+
+@kindex target est
+@item target est @var{dev}
+EST-300 ICE monitor, running on a CPU32 (M68K) board.
+
+@kindex target rom68k
+@item target rom68k @var{dev}
+ROM 68K monitor, running on an M68K IDP board.
+
+@end table
+
+If @value{GDBN} is configured with @code{m68*-ericsson-*}, it will
+instead have only a single special target command:
+
+@table @code
+
+@kindex target es1800
+@item target es1800 @var{dev}
+ES-1800 emulator for M68K.
+
+@end table
+
+[context?]
+
+@table @code
+
+@kindex target rombug
+@item target rombug @var{dev}
+ROMBUG ROM monitor for OS/9000.
+
+@end table
+
+@node M88K
+@subsection M88K
+
+@table @code
+
+@kindex target bug
+@item target bug @var{dev}
+BUG monitor, running on a MVME187 (m88k) board.
+
+@end table
+
+@node MIPS Embedded
+@subsection MIPS Embedded
+
+@cindex MIPS boards
+@value{GDBN} can use the MIPS remote debugging protocol to talk to a
+MIPS board attached to a serial line. This is available when
+you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}.
-@menu
-* Hitachi Boards:: Connecting to Hitachi boards.
-* Hitachi ICE:: Using the E7000 In-Circuit Emulator.
-* Hitachi Special:: Special @value{GDBN} commands for Hitachi micros.
-@end menu
+@need 1000
+Use these @value{GDBN} commands to specify the connection to your target board:
-@node Hitachi Boards
-@subsubsection Connecting to Hitachi boards
+@table @code
+@item target mips @var{port}
+@kindex target mips @var{port}
+To run a program on the board, start up @code{@value{GDBP}} with the
+name of your program as the argument. To connect to the board, use the
+command @samp{target mips @var{port}}, where @var{port} is the name of
+the serial port connected to the board. If the program has not already
+been downloaded to the board, you may use the @code{load} command to
+download it. You can then use all the usual @value{GDBN} commands.
-@c only for Unix hosts
-@kindex device
-@cindex serial device, Hitachi micros
-Use the special @code{@value{GDBN}} command @samp{device @var{port}} if you
-need to explicitly set the serial device. The default @var{port} is the
-first available port on your host. This is only necessary on Unix
-hosts, where it is typically something like @file{/dev/ttya}.
+For example, this sequence connects to the target board through a serial
+port, and loads and runs a program called @var{prog} through the
+debugger:
-@kindex speed
-@cindex serial line speed, Hitachi micros
-@code{@value{GDBN}} has another special command to set the communications
-speed: @samp{speed @var{bps}}. This command also is only used from Unix
-hosts; on DOS hosts, set the line speed as usual from outside @value{GDBN} with
-the DOS @code{mode} command (for instance,
-@w{@kbd{mode com2:9600,n,8,1,p}} for a 9600@dmn{bps} connection).
+@example
+host$ @value{GDBP} @var{prog}
+@value{GDBN} is free software and @dots{}
+(@value{GDBP}) target mips /dev/ttyb
+(@value{GDBP}) load @var{prog}
+(@value{GDBP}) run
+@end example
-The @samp{device} and @samp{speed} commands are available only when you
-use a Unix host to debug your Hitachi microprocessor programs. If you
-use a DOS host,
-@value{GDBN} depends on an auxiliary terminate-and-stay-resident program
-called @code{asynctsr} to communicate with the development board
-through a PC serial port. You must also use the DOS @code{mode} command
-to set up the serial port on the DOS side.
+@item target mips @var{hostname}:@var{portnumber}
+On some @value{GDBN} host configurations, you can specify a TCP
+connection (for instance, to a serial line managed by a terminal
+concentrator) instead of a serial port, using the syntax
+@samp{@var{hostname}:@var{portnumber}}.
-The following sample session illustrates the steps needed to start a
-program under @value{GDBN} control on an H8/300. The example uses a
-sample H8/300 program called @file{t.x}. The procedure is the same for
-the Hitachi SH and the H8/500.
+@item target pmon @var{port}
+@kindex target pmon @var{port}
+PMON ROM monitor.
-First hook up your development board. In this example, we use a
-board attached to serial port @code{COM2}; if you use a different serial
-port, substitute its name in the argument of the @code{mode} command.
-When you call @code{asynctsr}, the auxiliary comms program used by the
-debugger, you give it just the numeric part of the serial port's name;
-for example, @samp{asyncstr 2} below runs @code{asyncstr} on
-@code{COM2}.
+@item target ddb @var{port}
+@kindex target ddb @var{port}
+NEC's DDB variant of PMON for Vr4300.
-@example
-C:\H8300\TEST> asynctsr 2
-C:\H8300\TEST> mode com2:9600,n,8,1,p
+@item target lsi @var{port}
+@kindex target lsi @var{port}
+LSI variant of PMON.
-Resident portion of MODE loaded
+@kindex target r3900
+@item target r3900 @var{dev}
+Densan DVE-R3900 ROM monitor for Toshiba R3900 Mips.
-COM2: 9600, n, 8, 1, p
+@kindex target array
+@item target array @var{dev}
+Array Tech LSI33K RAID controller board.
-@end example
+@end table
-@quotation
-@emph{Warning:} We have noticed a bug in PC-NFS that conflicts with
-@code{asynctsr}. If you also run PC-NFS on your DOS host, you may need to
-disable it, or even boot without it, to use @code{asynctsr} to control
-your development board.
-@end quotation
-@kindex target hms@r{, and serial protocol}
-Now that serial communications are set up, and the development board is
-connected, you can start up @value{GDBN}. Call @code{@value{GDBP}} with
-the name of your program as the argument. @code{@value{GDBN}} prompts
-you, as usual, with the prompt @samp{(@value{GDBP})}. Use two special
-commands to begin your debugging session: @samp{target hms} to specify
-cross-debugging to the Hitachi board, and the @code{load} command to
-download your program to the board. @code{load} displays the names of
-the program's sections, and a @samp{*} for each 2K of data downloaded.
-(If you want to refresh @value{GDBN} data on symbols or on the
-executable file without downloading, use the @value{GDBN} commands
-@code{file} or @code{symbol-file}. These commands, and @code{load}
-itself, are described in @ref{Files,,Commands to specify files}.)
+@noindent
+@value{GDBN} also supports these special commands for MIPS targets:
-@smallexample
-(eg-C:\H8300\TEST) @value{GDBP} t.x
-@value{GDBN} is free software and you are welcome to distribute copies
- of it under certain conditions; type "show copying" to see
- the conditions.
-There is absolutely no warranty for @value{GDBN}; type "show warranty"
-for details.
-@value{GDBN} @value{GDBVN}, Copyright 1992 Free Software Foundation, Inc...
-(@value{GDBP}) target hms
-Connected to remote H8/300 HMS system.
-(@value{GDBP}) load t.x
-.text : 0x8000 .. 0xabde ***********
-.data : 0xabde .. 0xad30 *
-.stack : 0xf000 .. 0xf014 *
-@end smallexample
+@table @code
+@item set processor @var{args}
+@itemx show processor
+@kindex set processor @var{args}
+@kindex show processor
+Use the @code{set processor} command to set the type of MIPS
+processor when you want to access processor-type-specific registers.
+For example, @code{set processor @var{r3041}} tells @value{GDBN}
+to use the CPU registers appropriate for the 3041 chip.
+Use the @code{show processor} command to see what MIPS processor @value{GDBN}
+is using. Use the @code{info reg} command to see what registers
+@value{GDBN} is using.
-At this point, you're ready to run or debug your program. From here on,
-you can use all the usual @value{GDBN} commands. The @code{break} command
-sets breakpoints; the @code{run} command starts your program;
-@code{print} or @code{x} display data; the @code{continue} command
-resumes execution after stopping at a breakpoint. You can use the
-@code{help} command at any time to find out more about @value{GDBN} commands.
+@item set mipsfpu double
+@itemx set mipsfpu single
+@itemx set mipsfpu none
+@itemx show mipsfpu
+@kindex set mipsfpu
+@kindex show mipsfpu
+@cindex MIPS remote floating point
+@cindex floating point, MIPS remote
+If your target board does not support the MIPS floating point
+coprocessor, you should use the command @samp{set mipsfpu none} (if you
+need this, you may wish to put the command in your @value{GDBN} init
+file). This tells @value{GDBN} how to find the return value of
+functions which return floating point values. It also allows
+@value{GDBN} to avoid saving the floating point registers when calling
+functions on the board. If you are using a floating point coprocessor
+with only single precision floating point support, as on the @sc{r4650}
+processor, use the command @samp{set mipsfpu single}. The default
+double precision floating point coprocessor may be selected using
+@samp{set mipsfpu double}.
-Remember, however, that @emph{operating system} facilities aren't
-available on your development board; for example, if your program hangs,
-you can't send an interrupt---but you can press the @sc{reset} switch!
+In previous versions the only choices were double precision or no
+floating point, so @samp{set mipsfpu on} will select double precision
+and @samp{set mipsfpu off} will select no floating point.
-Use the @sc{reset} button on the development board
-@itemize @bullet
-@item
-to interrupt your program (don't use @kbd{ctl-C} on the DOS host---it has
-no way to pass an interrupt signal to the development board); and
+As usual, you can inquire about the @code{mipsfpu} variable with
+@samp{show mipsfpu}.
-@item
-to return to the @value{GDBN} command prompt after your program finishes
-normally. The communications protocol provides no other way for @value{GDBN}
-to detect program completion.
-@end itemize
+@item set remotedebug @var{n}
+@itemx show remotedebug
+@kindex set remotedebug@r{, MIPS protocol}
+@kindex show remotedebug@r{, MIPS protocol}
+@cindex @code{remotedebug}, MIPS protocol
+@cindex MIPS @code{remotedebug} protocol
+@c FIXME! For this to be useful, you must know something about the MIPS
+@c FIXME...protocol. Where is it described?
+You can see some debugging information about communications with the board
+by setting the @code{remotedebug} variable. If you set it to @code{1} using
+@samp{set remotedebug 1}, every packet is displayed. If you set it
+to @code{2}, every character is displayed. You can check the current value
+at any time with the command @samp{show remotedebug}.
-In either case, @value{GDBN} sees the effect of a @sc{reset} on the
-development board as a ``normal exit'' of your program.
+@item set timeout @var{seconds}
+@itemx set retransmit-timeout @var{seconds}
+@itemx show timeout
+@itemx show retransmit-timeout
+@cindex @code{timeout}, MIPS protocol
+@cindex @code{retransmit-timeout}, MIPS protocol
+@kindex set timeout
+@kindex show timeout
+@kindex set retransmit-timeout
+@kindex show retransmit-timeout
+You can control the timeout used while waiting for a packet, in the MIPS
+remote protocol, with the @code{set timeout @var{seconds}} command. The
+default is 5 seconds. Similarly, you can control the timeout used while
+waiting for an acknowledgement of a packet with the @code{set
+retransmit-timeout @var{seconds}} command. The default is 3 seconds.
+You can inspect both values with @code{show timeout} and @code{show
+retransmit-timeout}. (These commands are @emph{only} available when
+@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.)
-@node Hitachi ICE
-@subsubsection Using the E7000 in-circuit emulator
+The timeout set by @code{set timeout} does not apply when @value{GDBN}
+is waiting for your program to stop. In that case, @value{GDBN} waits
+forever because it has no way of knowing how long the program is going
+to run before stopping.
+@end table
-@kindex target e7000@r{, with Hitachi ICE}
-You can use the E7000 in-circuit emulator to develop code for either the
-Hitachi SH or the H8/300H. Use one of these forms of the @samp{target
-e7000} command to connect @value{GDBN} to your E7000:
+@node PowerPC
+@subsection PowerPC
@table @code
-@item target e7000 @var{port} @var{speed}
-Use this form if your E7000 is connected to a serial port. The
-@var{port} argument identifies what serial port to use (for example,
-@samp{com2}). The third argument is the line speed in bits per second
-(for example, @samp{9600}).
-@item target e7000 @var{hostname}
-If your E7000 is installed as a host on a TCP/IP network, you can just
-specify its hostname; @value{GDBN} uses @code{telnet} to connect.
-@end table
+@kindex target dink32
+@item target dink32 @var{dev}
+DINK32 ROM monitor.
-@node Hitachi Special
-@subsubsection Special @value{GDBN} commands for Hitachi micros
+@kindex target ppcbug
+@item target ppcbug @var{dev}
+@kindex target ppcbug1
+@item target ppcbug1 @var{dev}
+PPCBUG ROM monitor for PowerPC.
-Some @value{GDBN} commands are available only for the H8/300:
+@kindex target sds
+@item target sds @var{dev}
+SDS monitor, running on a PowerPC board (such as Motorola's ADS).
+
+@end table
+
+@node PA
+@subsection HP PA Embedded
@table @code
-@kindex set machine
-@kindex show machine
-@item set machine h8300
-@itemx set machine h8300h
-Condition @value{GDBN} for one of the two variants of the H8/300
-architecture with @samp{set machine}. You can use @samp{show machine}
-to check which variant is currently in effect.
+@kindex target op50n
+@item target op50n @var{dev}
+OP50N monitor, running on an OKI HPPA board.
+
+@kindex target w89k
+@item target w89k @var{dev}
+W89K monitor, running on a Winbond HPPA board.
@end table
-@node H8/500
-@subsection H8/500
+@node SH
+@subsection Hitachi SH
@table @code
-@kindex set memory @var{mod}
-@cindex memory models, H8/500
-@item set memory @var{mod}
-@itemx show memory
-Specify which H8/500 memory model (@var{mod}) you are using with
-@samp{set memory}; check which memory model is in effect with @samp{show
-memory}. The accepted values for @var{mod} are @code{small},
-@code{big}, @code{medium}, and @code{compact}.
+@kindex target hms@r{, with Hitachi SH}
+@item target hms @var{dev}
+A Hitachi SH board attached via serial line to your host. Use special
+commands @code{device} and @code{speed} to control the serial line and
+the communications speed used.
-@end table
+@kindex target e7000@r{, with Hitachi SH}
+@item target e7000 @var{dev}
+E7000 emulator for Hitachi SH.
-@node i960
-@subsection Intel i960
+@kindex target sh3@r{, with SH}
+@kindex target sh3e@r{, with SH}
+@item target sh3 @var{dev}
+@item target sh3e @var{dev}
+Hitachi SH-3 and SH-3E target systems.
-@table @code
+@end table
-@kindex target mon960
-@item target mon960 @var{dev}
-MON960 monitor for Intel i960.
+@node Sparclet
+@subsection Tsqware Sparclet
-@kindex target nindy
-@item target nindy @var{devicename}
-An Intel 960 board controlled by a Nindy Monitor. @var{devicename} is
-the name of the serial device to use for the connection, e.g.
-@file{/dev/ttya}.
+@cindex Sparclet
+
+@value{GDBN} enables developers to debug tasks running on
+Sparclet targets from a Unix host.
+@value{GDBN} uses code that runs on
+both the Unix host and on the Sparclet target. The program
+@code{@value{GDBP}} is installed and executed on the Unix host.
+@table @code
+@item remotetimeout @var{args}
+@kindex remotetimeout
+@value{GDBN} supports the option @code{remotetimeout}.
+This option is set by the user, and @var{args} represents the number of
+seconds @value{GDBN} waits for responses.
@end table
-@cindex Nindy
-@cindex i960
-@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems. When
-@value{GDBN} is configured to control a remote Intel 960 using Nindy, you can
-tell @value{GDBN} how to connect to the 960 in several ways:
+@cindex compiling, on Sparclet
+When compiling for debugging, include the options @samp{-g} to get debug
+information and @samp{-Ttext} to relocate the program to where you wish to
+load it on the target. You may also want to add the options @samp{-n} or
+@samp{-N} in order to reduce the size of the sections. Example:
-@itemize @bullet
-@item
-Through command line options specifying serial port, version of the
-Nindy protocol, and communications speed;
+@example
+sparclet-aout-gcc prog.c -Ttext 0x12010000 -g -o prog -N
+@end example
-@item
-By responding to a prompt on startup;
+You can use @code{objdump} to verify that the addresses are what you intended:
-@item
-By using the @code{target} command at any point during your @value{GDBN}
-session. @xref{Target Commands, ,Commands for managing targets}.
+@example
+sparclet-aout-objdump --headers --syms prog
+@end example
-@end itemize
+@cindex running, on Sparclet
+Once you have set
+your Unix execution search path to find @value{GDBN}, you are ready to
+run @value{GDBN}. From your Unix host, run @code{@value{GDBP}}
+(or @code{sparclet-aout-gdb}, depending on your installation).
-@cindex download to Nindy-960
-With the Nindy interface to an Intel 960 board, @code{load}
-downloads @var{filename} to the 960 as well as adding its symbols in
-@value{GDBN}.
+@value{GDBN} comes up showing the prompt:
+
+@example
+(gdbslet)
+@end example
@menu
-* Nindy Startup:: Startup with Nindy
-* Nindy Options:: Options for Nindy
-* Nindy Reset:: Nindy reset command
+* Sparclet File:: Setting the file to debug
+* Sparclet Connection:: Connecting to Sparclet
+* Sparclet Download:: Sparclet download
+* Sparclet Execution:: Running and debugging
@end menu
-@node Nindy Startup
-@subsubsection Startup with Nindy
+@node Sparclet File
+@subsubsection Setting file to debug
-If you simply start @code{@value{GDBP}} without using any command-line
-options, you are prompted for what serial port to use, @emph{before} you
-reach the ordinary @value{GDBN} prompt:
+The @value{GDBN} command @code{file} lets you choose with program to debug.
@example
-Attach /dev/ttyNN -- specify NN, or "quit" to quit:
+(gdbslet) file prog
@end example
-@noindent
-Respond to the prompt with whatever suffix (after @samp{/dev/tty})
-identifies the serial port you want to use. You can, if you choose,
-simply start up with no Nindy connection by responding to the prompt
-with an empty line. If you do this and later wish to attach to Nindy,
-use @code{target} (@pxref{Target Commands, ,Commands for managing targets}).
+@need 1000
+@value{GDBN} then attempts to read the symbol table of @file{prog}.
+@value{GDBN} locates
+the file by searching the directories listed in the command search
+path.
+If the file was compiled with debug information (option "-g"), source
+files will be searched as well.
+@value{GDBN} locates
+the source files by searching the directories listed in the directory search
+path (@pxref{Environment, ,Your program's environment}).
+If it fails
+to find a file, it displays a message such as:
-@node Nindy Options
-@subsubsection Options for Nindy
+@example
+prog: No such file or directory.
+@end example
-These are the startup options for beginning your @value{GDBN} session with a
-Nindy-960 board attached:
+When this happens, add the appropriate directories to the search paths with
+the @value{GDBN} commands @code{path} and @code{dir}, and execute the
+@code{target} command again.
-@table @code
-@item -r @var{port}
-Specify the serial port name of a serial interface to be used to connect
-to the target system. This option is only available when @value{GDBN} is
-configured for the Intel 960 target architecture. You may specify
-@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
-device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
-suffix for a specific @code{tty} (e.g. @samp{-r a}).
+@node Sparclet Connection
+@subsubsection Connecting to Sparclet
-@item -O
-(An uppercase letter ``O'', not a zero.) Specify that @value{GDBN} should use
-the ``old'' Nindy monitor protocol to connect to the target system.
-This option is only available when @value{GDBN} is configured for the Intel 960
-target architecture.
+The @value{GDBN} command @code{target} lets you connect to a Sparclet target.
+To connect to a target on serial port ``@code{ttya}'', type:
-@quotation
-@emph{Warning:} if you specify @samp{-O}, but are actually trying to
-connect to a target system that expects the newer protocol, the connection
-fails, appearing to be a speed mismatch. @value{GDBN} repeatedly
-attempts to reconnect at several different line speeds. You can abort
-this process with an interrupt.
-@end quotation
+@example
+(gdbslet) target sparclet /dev/ttya
+Remote target sparclet connected to /dev/ttya
+main () at ../prog.c:3
+@end example
-@item -brk
-Specify that @value{GDBN} should first send a @code{BREAK} signal to the target
-system, in an attempt to reset it, before connecting to a Nindy target.
+@need 750
+@value{GDBN} displays messages like these:
-@quotation
-@emph{Warning:} Many target systems do not have the hardware that this
-requires; it only works with a few boards.
-@end quotation
-@end table
+@example
+Connected to ttya.
+@end example
-The standard @samp{-b} option controls the line speed used on the serial
-port.
+@node Sparclet Download
+@subsubsection Sparclet download
-@c @group
-@node Nindy Reset
-@subsubsection Nindy reset command
+@cindex download to Sparclet
+Once connected to the Sparclet target,
+you can use the @value{GDBN}
+@code{load} command to download the file from the host to the target.
+The file name and load offset should be given as arguments to the @code{load}
+command.
+Since the file format is aout, the program must be loaded to the starting
+address. You can use @code{objdump} to find out what this value is. The load
+offset is an offset which is added to the VMA (virtual memory address)
+of each of the file's sections.
+For instance, if the program
+@file{prog} was linked to text address 0x1201000, with data at 0x12010160
+and bss at 0x12010170, in @value{GDBN}, type:
-@table @code
-@item reset
-@kindex reset
-For a Nindy target, this command sends a ``break'' to the remote target
-system; this is only useful if the target has been equipped with a
-circuit to perform a hard reset (or some other interesting action) when
-a break is detected.
-@end table
-@c @end group
+@example
+(gdbslet) load prog 0x12010000
+Loading section .text, size 0xdb0 vma 0x12010000
+@end example
-@node M32R/D
-@subsection Mitsubishi M32R/D
+If the code is loaded at a different address then what the program was linked
+to, you may need to use the @code{section} and @code{add-symbol-file} commands
+to tell @value{GDBN} where to map the symbol table.
+
+@node Sparclet Execution
+@subsubsection Running and debugging
+
+@cindex running and debugging Sparclet programs
+You can now begin debugging the task using @value{GDBN}'s execution control
+commands, @code{b}, @code{step}, @code{run}, etc. See the @value{GDBN}
+manual for the list of commands.
+
+@example
+(gdbslet) b main
+Breakpoint 1 at 0x12010000: file prog.c, line 3.
+(gdbslet) run
+Starting program: prog
+Breakpoint 1, main (argc=1, argv=0xeffff21c) at prog.c:3
+3 char *symarg = 0;
+(gdbslet) step
+4 char *execarg = "hello!";
+(gdbslet)
+@end example
+
+@node Sparclite
+@subsection Fujitsu Sparclite
@table @code
-@kindex target m32r
-@item target m32r @var{dev}
-Mitsubishi M32R/D ROM monitor.
+@kindex target sparclite
+@item target sparclite @var{dev}
+Fujitsu sparclite boards, used only for the purpose of loading.
+You must use an additional command to debug the program.
+For example: target remote @var{dev} using @value{GDBN} standard
+remote protocol.
@end table
-@node M68K
-@subsection M68k
+@node ST2000
+@subsection Tandem ST2000
-The Motorola m68k configuration includes ColdFire support, and
-target command for the following ROM monitors.
+@value{GDBN} may be used with a Tandem ST2000 phone switch, running Tandem's
+STDBUG protocol.
-@table @code
+To connect your ST2000 to the host system, see the manufacturer's
+manual. Once the ST2000 is physically attached, you can run:
-@kindex target abug
-@item target abug @var{dev}
-ABug ROM monitor for M68K.
+@example
+target st2000 @var{dev} @var{speed}
+@end example
-@kindex target cpu32bug
-@item target cpu32bug @var{dev}
-CPU32BUG monitor, running on a CPU32 (M68K) board.
+@noindent
+to establish it as your debugging environment. @var{dev} is normally
+the name of a serial device, such as @file{/dev/ttya}, connected to the
+ST2000 via a serial line. You can instead specify @var{dev} as a TCP
+connection (for example, to a serial line attached via a terminal
+concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}.
-@kindex target dbug
-@item target dbug @var{dev}
-dBUG ROM monitor for Motorola ColdFire.
+The @code{load} and @code{attach} commands are @emph{not} defined for
+this target; you must load your program into the ST2000 as you normally
+would for standalone operation. @value{GDBN} reads debugging information
+(such as symbols) from a separate, debugging version of the program
+available on your host computer.
+@c FIXME!! This is terribly vague; what little content is here is
+@c basically hearsay.
-@kindex target est
-@item target est @var{dev}
-EST-300 ICE monitor, running on a CPU32 (M68K) board.
+@cindex ST2000 auxiliary commands
+These auxiliary @value{GDBN} commands are available to help you with the ST2000
+environment:
-@kindex target rom68k
-@item target rom68k @var{dev}
-ROM 68K monitor, running on an M68K IDP board.
+@table @code
+@item st2000 @var{command}
+@kindex st2000 @var{cmd}
+@cindex STDBUG commands (ST2000)
+@cindex commands to STDBUG (ST2000)
+Send a @var{command} to the STDBUG monitor. See the manufacturer's
+manual for available commands.
+@item connect
+@cindex connect (to STDBUG)
+Connect the controlling terminal to the STDBUG command monitor. When
+you are done interacting with STDBUG, typing either of two character
+sequences gets you back to the @value{GDBN} command prompt:
+@kbd{@key{RET}~.} (Return, followed by tilde and period) or
+@kbd{@key{RET}~@key{C-d}} (Return, followed by tilde and control-D).
@end table
-If @value{GDBN} is configured with @code{m68*-ericsson-*}, it will
-instead have only a single special target command:
+@node Z8000
+@subsection Zilog Z8000
-@table @code
+@cindex Z8000
+@cindex simulator, Z8000
+@cindex Zilog Z8000 simulator
-@kindex target es1800
-@item target es1800 @var{dev}
-ES-1800 emulator for M68K.
+When configured for debugging Zilog Z8000 targets, @value{GDBN} includes
+a Z8000 simulator.
+
+For the Z8000 family, @samp{target sim} simulates either the Z8002 (the
+unsegmented variant of the Z8000 architecture) or the Z8001 (the
+segmented variant). The simulator recognizes which architecture is
+appropriate by inspecting the object code.
+@table @code
+@item target sim @var{args}
+@kindex sim
+@kindex target sim@r{, with Z8000}
+Debug programs on a simulated CPU. If the simulator supports setup
+options, specify them via @var{args}.
@end table
-[context?]
+@noindent
+After specifying this target, you can debug programs for the simulated
+CPU in the same style as programs for your host computer; use the
+@code{file} command to load a new program image, the @code{run} command
+to run your program, and so on.
+
+As well as making available all the usual machine registers
+(@pxref{Registers, ,Registers}), the Z8000 simulator provides three
+additional items of information as specially named registers:
@table @code
-@kindex target rombug
-@item target rombug @var{dev}
-ROMBUG ROM monitor for OS/9000.
+@item cycles
+Counts clock-ticks in the simulator.
-@end table
+@item insts
+Counts instructions run in the simulator.
-@node M88K
-@subsection M88K
+@item time
+Execution time in 60ths of a second.
-@table @code
+@end table
-@kindex target bug
-@item target bug @var{dev}
-BUG monitor, running on a MVME187 (m88k) board.
+You can refer to these values in @value{GDBN} expressions with the usual
+conventions; for example, @w{@samp{b fputc if $cycles>5000}} sets a
+conditional breakpoint that suspends only after at least 5000
+simulated clock ticks.
-@end table
+@node Architectures
+@section Architectures
-@node MIPS Embedded
-@subsection MIPS Embedded
+This section describes characteristics of architectures that affect
+all uses of @value{GDBN} with the architecture, both native and cross.
-@cindex MIPS boards
-@value{GDBN} can use the MIPS remote debugging protocol to talk to a
-MIPS board attached to a serial line. This is available when
-you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}.
+@menu
+* A29K::
+* Alpha::
+* MIPS::
+@end menu
-@need 1000
-Use these @value{GDBN} commands to specify the connection to your target board:
+@node A29K
+@subsection A29K
@table @code
-@item target mips @var{port}
-@kindex target mips @var{port}
-To run a program on the board, start up @code{@value{GDBP}} with the
-name of your program as the argument. To connect to the board, use the
-command @samp{target mips @var{port}}, where @var{port} is the name of
-the serial port connected to the board. If the program has not already
-been downloaded to the board, you may use the @code{load} command to
-download it. You can then use all the usual @value{GDBN} commands.
-For example, this sequence connects to the target board through a serial
-port, and loads and runs a program called @var{prog} through the
-debugger:
+@kindex set rstack_high_address
+@cindex AMD 29K register stack
+@cindex register stack, AMD29K
+@item set rstack_high_address @var{address}
+On AMD 29000 family processors, registers are saved in a separate
+@dfn{register stack}. There is no way for @value{GDBN} to determine the
+extent of this stack. Normally, @value{GDBN} just assumes that the
+stack is ``large enough''. This may result in @value{GDBN} referencing
+memory locations that do not exist. If necessary, you can get around
+this problem by specifying the ending address of the register stack with
+the @code{set rstack_high_address} command. The argument should be an
+address, which you probably want to precede with @samp{0x} to specify in
+hexadecimal.
-@example
-host$ @value{GDBP} @var{prog}
-@value{GDBN} is free software and @dots{}
-(@value{GDBP}) target mips /dev/ttyb
-(@value{GDBP}) load @var{prog}
-(@value{GDBP}) run
-@end example
+@kindex show rstack_high_address
+@item show rstack_high_address
+Display the current limit of the register stack, on AMD 29000 family
+processors.
-@item target mips @var{hostname}:@var{portnumber}
-On some @value{GDBN} host configurations, you can specify a TCP
-connection (for instance, to a serial line managed by a terminal
-concentrator) instead of a serial port, using the syntax
-@samp{@var{hostname}:@var{portnumber}}.
+@end table
-@item target pmon @var{port}
-@kindex target pmon @var{port}
-PMON ROM monitor.
+@node Alpha
+@subsection Alpha
-@item target ddb @var{port}
-@kindex target ddb @var{port}
-NEC's DDB variant of PMON for Vr4300.
+See the following section.
-@item target lsi @var{port}
-@kindex target lsi @var{port}
-LSI variant of PMON.
+@node MIPS
+@subsection MIPS
-@kindex target r3900
-@item target r3900 @var{dev}
-Densan DVE-R3900 ROM monitor for Toshiba R3900 Mips.
+@cindex stack on Alpha
+@cindex stack on MIPS
+@cindex Alpha stack
+@cindex MIPS stack
+Alpha- and MIPS-based computers use an unusual stack frame, which
+sometimes requires @value{GDBN} to search backward in the object code to
+find the beginning of a function.
-@kindex target array
-@item target array @var{dev}
-Array Tech LSI33K RAID controller board.
+@cindex response time, MIPS debugging
+To improve response time (especially for embedded applications, where
+@value{GDBN} may be restricted to a slow serial line for this search)
+you may want to limit the size of this search, using one of these
+commands:
-@end table
+@table @code
+@cindex @code{heuristic-fence-post} (Alpha, MIPS)
+@item set heuristic-fence-post @var{limit}
+Restrict @value{GDBN} to examining at most @var{limit} bytes in its
+search for the beginning of a function. A value of @var{0} (the
+default) means there is no limit. However, except for @var{0}, the
+larger the limit the more bytes @code{heuristic-fence-post} must search
+and therefore the longer it takes to run.
+@item show heuristic-fence-post
+Display the current limit.
+@end table
@noindent
-@value{GDBN} also supports these special commands for MIPS targets:
+These commands are available @emph{only} when @value{GDBN} is configured
+for debugging programs on Alpha or MIPS processors.
-@table @code
-@item set processor @var{args}
-@itemx show processor
-@kindex set processor @var{args}
-@kindex show processor
-Use the @code{set processor} command to set the type of MIPS
-processor when you want to access processor-type-specific registers.
-For example, @code{set processor @var{r3041}} tells @value{GDBN}
-to use the CPU registers appropriate for the 3041 chip.
-Use the @code{show processor} command to see what MIPS processor @value{GDBN}
-is using. Use the @code{info reg} command to see what registers
-@value{GDBN} is using.
-@item set mipsfpu double
-@itemx set mipsfpu single
-@itemx set mipsfpu none
-@itemx show mipsfpu
-@kindex set mipsfpu
-@kindex show mipsfpu
-@cindex MIPS remote floating point
-@cindex floating point, MIPS remote
-If your target board does not support the MIPS floating point
-coprocessor, you should use the command @samp{set mipsfpu none} (if you
-need this, you may wish to put the command in your @value{GDBN} init
-file). This tells @value{GDBN} how to find the return value of
-functions which return floating point values. It also allows
-@value{GDBN} to avoid saving the floating point registers when calling
-functions on the board. If you are using a floating point coprocessor
-with only single precision floating point support, as on the @sc{r4650}
-processor, use the command @samp{set mipsfpu single}. The default
-double precision floating point coprocessor may be selected using
-@samp{set mipsfpu double}.
+@node Controlling GDB
+@chapter Controlling @value{GDBN}
+
+You can alter the way @value{GDBN} interacts with you by using the
+@code{set} command. For commands controlling how @value{GDBN} displays
+data, see @ref{Print Settings, ,Print settings}. Other settings are
+described here.
+
+@menu
+* Prompt:: Prompt
+* Editing:: Command editing
+* History:: Command history
+* Screen Size:: Screen size
+* Numbers:: Numbers
+* Messages/Warnings:: Optional warnings and messages
+* Debugging Output:: Optional messages about internal happenings
+@end menu
+
+@node Prompt
+@section Prompt
-In previous versions the only choices were double precision or no
-floating point, so @samp{set mipsfpu on} will select double precision
-and @samp{set mipsfpu off} will select no floating point.
+@cindex prompt
-As usual, you can inquire about the @code{mipsfpu} variable with
-@samp{show mipsfpu}.
+@value{GDBN} indicates its readiness to read a command by printing a string
+called the @dfn{prompt}. This string is normally @samp{(@value{GDBP})}. You
+can change the prompt string with the @code{set prompt} command. For
+instance, when debugging @value{GDBN} with @value{GDBN}, it is useful to change
+the prompt in one of the @value{GDBN} sessions so that you can always tell
+which one you are talking to.
-@item set remotedebug @var{n}
-@itemx show remotedebug
-@kindex set remotedebug@r{, MIPS protocol}
-@kindex show remotedebug@r{, MIPS protocol}
-@cindex @code{remotedebug}, MIPS protocol
-@cindex MIPS @code{remotedebug} protocol
-@c FIXME! For this to be useful, you must know something about the MIPS
-@c FIXME...protocol. Where is it described?
-You can see some debugging information about communications with the board
-by setting the @code{remotedebug} variable. If you set it to @code{1} using
-@samp{set remotedebug 1}, every packet is displayed. If you set it
-to @code{2}, every character is displayed. You can check the current value
-at any time with the command @samp{show remotedebug}.
+@emph{Note:} @code{set prompt} does not add a space for you after the
+prompt you set. This allows you to set a prompt which ends in a space
+or a prompt that does not.
-@item set timeout @var{seconds}
-@itemx set retransmit-timeout @var{seconds}
-@itemx show timeout
-@itemx show retransmit-timeout
-@cindex @code{timeout}, MIPS protocol
-@cindex @code{retransmit-timeout}, MIPS protocol
-@kindex set timeout
-@kindex show timeout
-@kindex set retransmit-timeout
-@kindex show retransmit-timeout
-You can control the timeout used while waiting for a packet, in the MIPS
-remote protocol, with the @code{set timeout @var{seconds}} command. The
-default is 5 seconds. Similarly, you can control the timeout used while
-waiting for an acknowledgement of a packet with the @code{set
-retransmit-timeout @var{seconds}} command. The default is 3 seconds.
-You can inspect both values with @code{show timeout} and @code{show
-retransmit-timeout}. (These commands are @emph{only} available when
-@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.)
+@table @code
+@kindex set prompt
+@item set prompt @var{newprompt}
+Directs @value{GDBN} to use @var{newprompt} as its prompt string henceforth.
-The timeout set by @code{set timeout} does not apply when @value{GDBN}
-is waiting for your program to stop. In that case, @value{GDBN} waits
-forever because it has no way of knowing how long the program is going
-to run before stopping.
+@kindex show prompt
+@item show prompt
+Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}}
@end table
-@node PowerPC
-@subsection PowerPC
+@node Editing
+@section Command editing
+@cindex readline
+@cindex command line editing
-@table @code
+@value{GDBN} reads its input commands via the @dfn{readline} interface. This
+@sc{gnu} library provides consistent behavior for programs which provide a
+command line interface to the user. Advantages are @sc{gnu} Emacs-style
+or @dfn{vi}-style inline editing of commands, @code{csh}-like history
+substitution, and a storage and recall of command history across
+debugging sessions.
-@kindex target dink32
-@item target dink32 @var{dev}
-DINK32 ROM monitor.
+You may control the behavior of command line editing in @value{GDBN} with the
+command @code{set}.
-@kindex target ppcbug
-@item target ppcbug @var{dev}
-@kindex target ppcbug1
-@item target ppcbug1 @var{dev}
-PPCBUG ROM monitor for PowerPC.
+@table @code
+@kindex set editing
+@cindex editing
+@item set editing
+@itemx set editing on
+Enable command line editing (enabled by default).
-@kindex target sds
-@item target sds @var{dev}
-SDS monitor, running on a PowerPC board (such as Motorola's ADS).
+@item set editing off
+Disable command line editing.
+@kindex show editing
+@item show editing
+Show whether command line editing is enabled.
@end table
-@node PA
-@subsection HP PA Embedded
+@node History
+@section Command history
+
+@value{GDBN} can keep track of the commands you type during your
+debugging sessions, so that you can be certain of precisely what
+happened. Use these commands to manage the @value{GDBN} command
+history facility.
@table @code
+@cindex history substitution
+@cindex history file
+@kindex set history filename
+@kindex GDBHISTFILE
+@item set history filename @var{fname}
+Set the name of the @value{GDBN} command history file to @var{fname}.
+This is the file where @value{GDBN} reads an initial command history
+list, and where it writes the command history from this session when it
+exits. You can access this list through history expansion or through
+the history command editing characters listed below. This file defaults
+to the value of the environment variable @code{GDBHISTFILE}, or to
+@file{./.gdb_history} (@file{./_gdb_history} on MS-DOS) if this variable
+is not set.
-@kindex target op50n
-@item target op50n @var{dev}
-OP50N monitor, running on an OKI HPPA board.
+@cindex history save
+@kindex set history save
+@item set history save
+@itemx set history save on
+Record command history in a file, whose name may be specified with the
+@code{set history filename} command. By default, this option is disabled.
-@kindex target w89k
-@item target w89k @var{dev}
-W89K monitor, running on a Winbond HPPA board.
+@item set history save off
+Stop recording command history in a file.
+@cindex history size
+@kindex set history size
+@item set history size @var{size}
+Set the number of commands which @value{GDBN} keeps in its history list.
+This defaults to the value of the environment variable
+@code{HISTSIZE}, or to 256 if this variable is not set.
@end table
-@node SH
-@subsection Hitachi SH
+@cindex history expansion
+History expansion assigns special meaning to the character @kbd{!}.
+@ifset have-readline-appendices
+@xref{Event Designators}.
+@end ifset
+
+Since @kbd{!} is also the logical not operator in C, history expansion
+is off by default. If you decide to enable history expansion with the
+@code{set history expansion on} command, you may sometimes need to
+follow @kbd{!} (when it is used as logical not, in an expression) with
+a space or a tab to prevent it from being expanded. The readline
+history facilities do not attempt substitution on the strings
+@kbd{!=} and @kbd{!(}, even when history expansion is enabled.
+
+The commands to control history expansion are:
@table @code
+@kindex set history expansion
+@item set history expansion on
+@itemx set history expansion
+Enable history expansion. History expansion is off by default.
-@kindex target hms@r{, with Hitachi SH}
-@item target hms @var{dev}
-A Hitachi SH board attached via serial line to your host. Use special
-commands @code{device} and @code{speed} to control the serial line and
-the communications speed used.
+@item set history expansion off
+Disable history expansion.
-@kindex target e7000@r{, with Hitachi SH}
-@item target e7000 @var{dev}
-E7000 emulator for Hitachi SH.
+The readline code comes with more complete documentation of
+editing and history expansion features. Users unfamiliar with @sc{gnu} Emacs
+or @code{vi} may wish to read it.
+@ifset have-readline-appendices
+@xref{Command Line Editing}.
+@end ifset
-@kindex target sh3@r{, with SH}
-@kindex target sh3e@r{, with SH}
-@item target sh3 @var{dev}
-@item target sh3e @var{dev}
-Hitachi SH-3 and SH-3E target systems.
+@c @group
+@kindex show history
+@item show history
+@itemx show history filename
+@itemx show history save
+@itemx show history size
+@itemx show history expansion
+These commands display the state of the @value{GDBN} history parameters.
+@code{show history} by itself displays all four states.
+@c @end group
+@end table
+
+@table @code
+@kindex shows
+@item show commands
+Display the last ten commands in the command history.
+@item show commands @var{n}
+Print ten commands centered on command number @var{n}.
+
+@item show commands +
+Print ten commands just after the commands last printed.
@end table
-@node Sparclet
-@subsection Tsqware Sparclet
+@node Screen Size
+@section Screen size
+@cindex size of screen
+@cindex pauses in output
-@cindex Sparclet
+Certain commands to @value{GDBN} may produce large amounts of
+information output to the screen. To help you read all of it,
+@value{GDBN} pauses and asks you for input at the end of each page of
+output. Type @key{RET} when you want to continue the output, or @kbd{q}
+to discard the remaining output. Also, the screen width setting
+determines when to wrap lines of output. Depending on what is being
+printed, @value{GDBN} tries to break the line at a readable place,
+rather than simply letting it overflow onto the following line.
+
+Normally @value{GDBN} knows the size of the screen from the terminal
+driver software. For example, on Unix @value{GDBN} uses the termcap data base
+together with the value of the @code{TERM} environment variable and the
+@code{stty rows} and @code{stty cols} settings. If this is not correct,
+you can override it with the @code{set height} and @code{set
+width} commands:
+
+@table @code
+@kindex set height
+@kindex set width
+@kindex show width
+@kindex show height
+@item set height @var{lpp}
+@itemx show height
+@itemx set width @var{cpl}
+@itemx show width
+These @code{set} commands specify a screen height of @var{lpp} lines and
+a screen width of @var{cpl} characters. The associated @code{show}
+commands display the current settings.
-@value{GDBN} enables developers to debug tasks running on
-Sparclet targets from a Unix host.
-@value{GDBN} uses code that runs on
-both the Unix host and on the Sparclet target. The program
-@code{@value{GDBP}} is installed and executed on the Unix host.
+If you specify a height of zero lines, @value{GDBN} does not pause during
+output no matter how long the output is. This is useful if output is to a
+file or to an editor buffer.
-@table @code
-@item remotetimeout @var{args}
-@kindex remotetimeout
-@value{GDBN} supports the option @code{remotetimeout}.
-This option is set by the user, and @var{args} represents the number of
-seconds @value{GDBN} waits for responses.
+Likewise, you can specify @samp{set width 0} to prevent @value{GDBN}
+from wrapping its output.
@end table
-@cindex compiling, on Sparclet
-When compiling for debugging, include the options @samp{-g} to get debug
-information and @samp{-Ttext} to relocate the program to where you wish to
-load it on the target. You may also want to add the options @samp{-n} or
-@samp{-N} in order to reduce the size of the sections. Example:
-
-@example
-sparclet-aout-gcc prog.c -Ttext 0x12010000 -g -o prog -N
-@end example
+@node Numbers
+@section Numbers
+@cindex number representation
+@cindex entering numbers
-You can use @code{objdump} to verify that the addresses are what you intended:
+You can always enter numbers in octal, decimal, or hexadecimal in
+@value{GDBN} by the usual conventions: octal numbers begin with
+@samp{0}, decimal numbers end with @samp{.}, and hexadecimal numbers
+begin with @samp{0x}. Numbers that begin with none of these are, by
+default, entered in base 10; likewise, the default display for
+numbers---when no particular format is specified---is base 10. You can
+change the default base for both input and output with the @code{set
+radix} command.
-@example
-sparclet-aout-objdump --headers --syms prog
-@end example
+@table @code
+@kindex set input-radix
+@item set input-radix @var{base}
+Set the default base for numeric input. Supported choices
+for @var{base} are decimal 8, 10, or 16. @var{base} must itself be
+specified either unambiguously or using the current default radix; for
+example, any of
-@cindex running, on Sparclet
-Once you have set
-your Unix execution search path to find @value{GDBN}, you are ready to
-run @value{GDBN}. From your Unix host, run @code{@value{GDBP}}
-(or @code{sparclet-aout-gdb}, depending on your installation).
+@smallexample
+set radix 012
+set radix 10.
+set radix 0xa
+@end smallexample
-@value{GDBN} comes up showing the prompt:
+@noindent
+sets the base to decimal. On the other hand, @samp{set radix 10}
+leaves the radix unchanged no matter what it was.
-@example
-(gdbslet)
-@end example
+@kindex set output-radix
+@item set output-radix @var{base}
+Set the default base for numeric display. Supported choices
+for @var{base} are decimal 8, 10, or 16. @var{base} must itself be
+specified either unambiguously or using the current default radix.
-@menu
-* Sparclet File:: Setting the file to debug
-* Sparclet Connection:: Connecting to Sparclet
-* Sparclet Download:: Sparclet download
-* Sparclet Execution:: Running and debugging
-@end menu
+@kindex show input-radix
+@item show input-radix
+Display the current default base for numeric input.
-@node Sparclet File
-@subsubsection Setting file to debug
+@kindex show output-radix
+@item show output-radix
+Display the current default base for numeric display.
+@end table
-The @value{GDBN} command @code{file} lets you choose with program to debug.
+@node Messages/Warnings
+@section Optional warnings and messages
-@example
-(gdbslet) file prog
-@end example
+By default, @value{GDBN} is silent about its inner workings. If you are
+running on a slow machine, you may want to use the @code{set verbose}
+command. This makes @value{GDBN} tell you when it does a lengthy
+internal operation, so you will not think it has crashed.
-@need 1000
-@value{GDBN} then attempts to read the symbol table of @file{prog}.
-@value{GDBN} locates
-the file by searching the directories listed in the command search
-path.
-If the file was compiled with debug information (option "-g"), source
-files will be searched as well.
-@value{GDBN} locates
-the source files by searching the directories listed in the directory search
-path (@pxref{Environment, ,Your program's environment}).
-If it fails
-to find a file, it displays a message such as:
+Currently, the messages controlled by @code{set verbose} are those
+which announce that the symbol table for a source file is being read;
+see @code{symbol-file} in @ref{Files, ,Commands to specify files}.
-@example
-prog: No such file or directory.
-@end example
+@table @code
+@kindex set verbose
+@item set verbose on
+Enables @value{GDBN} output of certain informational messages.
-When this happens, add the appropriate directories to the search paths with
-the @value{GDBN} commands @code{path} and @code{dir}, and execute the
-@code{target} command again.
+@item set verbose off
+Disables @value{GDBN} output of certain informational messages.
-@node Sparclet Connection
-@subsubsection Connecting to Sparclet
+@kindex show verbose
+@item show verbose
+Displays whether @code{set verbose} is on or off.
+@end table
-The @value{GDBN} command @code{target} lets you connect to a Sparclet target.
-To connect to a target on serial port ``@code{ttya}'', type:
+By default, if @value{GDBN} encounters bugs in the symbol table of an
+object file, it is silent; but if you are debugging a compiler, you may
+find this information useful (@pxref{Symbol Errors, ,Errors reading
+symbol files}).
-@example
-(gdbslet) target sparclet /dev/ttya
-Remote target sparclet connected to /dev/ttya
-main () at ../prog.c:3
-@end example
+@table @code
-@need 750
-@value{GDBN} displays messages like these:
+@kindex set complaints
+@item set complaints @var{limit}
+Permits @value{GDBN} to output @var{limit} complaints about each type of
+unusual symbols before becoming silent about the problem. Set
+@var{limit} to zero to suppress all complaints; set it to a large number
+to prevent complaints from being suppressed.
-@example
-Connected to ttya.
-@end example
+@kindex show complaints
+@item show complaints
+Displays how many symbol complaints @value{GDBN} is permitted to produce.
-@node Sparclet Download
-@subsubsection Sparclet download
+@end table
-@cindex download to Sparclet
-Once connected to the Sparclet target,
-you can use the @value{GDBN}
-@code{load} command to download the file from the host to the target.
-The file name and load offset should be given as arguments to the @code{load}
-command.
-Since the file format is aout, the program must be loaded to the starting
-address. You can use @code{objdump} to find out what this value is. The load
-offset is an offset which is added to the VMA (virtual memory address)
-of each of the file's sections.
-For instance, if the program
-@file{prog} was linked to text address 0x1201000, with data at 0x12010160
-and bss at 0x12010170, in @value{GDBN}, type:
+By default, @value{GDBN} is cautious, and asks what sometimes seems to be a
+lot of stupid questions to confirm certain commands. For example, if
+you try to run a program which is already running:
@example
-(gdbslet) load prog 0x12010000
-Loading section .text, size 0xdb0 vma 0x12010000
+(@value{GDBP}) run
+The program being debugged has been started already.
+Start it from the beginning? (y or n)
@end example
-If the code is loaded at a different address then what the program was linked
-to, you may need to use the @code{section} and @code{add-symbol-file} commands
-to tell @value{GDBN} where to map the symbol table.
+If you are willing to unflinchingly face the consequences of your own
+commands, you can disable this ``feature'':
-@node Sparclet Execution
-@subsubsection Running and debugging
+@table @code
-@cindex running and debugging Sparclet programs
-You can now begin debugging the task using @value{GDBN}'s execution control
-commands, @code{b}, @code{step}, @code{run}, etc. See the @value{GDBN}
-manual for the list of commands.
+@kindex set confirm
+@cindex flinching
+@cindex confirmation
+@cindex stupid questions
+@item set confirm off
+Disables confirmation requests.
-@example
-(gdbslet) b main
-Breakpoint 1 at 0x12010000: file prog.c, line 3.
-(gdbslet) run
-Starting program: prog
-Breakpoint 1, main (argc=1, argv=0xeffff21c) at prog.c:3
-3 char *symarg = 0;
-(gdbslet) step
-4 char *execarg = "hello!";
-(gdbslet)
-@end example
+@item set confirm on
+Enables confirmation requests (the default).
-@node Sparclite
-@subsection Fujitsu Sparclite
+@kindex show confirm
+@item show confirm
+Displays state of confirmation requests.
+
+@end table
+@node Debugging Output
+@section Optional messages about internal happenings
@table @code
+@kindex set debug arch
+@item set debug arch
+Turns on or off display of gdbarch debugging info. The default is off
+@kindex show debug arch
+@item show debug arch
+Displays the current state of displaying gdbarch debugging info.
+@kindex set debug event
+@item set debug event
+Turns on or off display of @value{GDBN} event debugging info. The
+default is off.
+@kindex show debug event
+@item show debug event
+Displays the current state of displaying @value{GDBN} event debugging
+info.
+@kindex set debug expression
+@item set debug expression
+Turns on or off display of @value{GDBN} expression debugging info. The
+default is off.
+@kindex show debug expression
+@item show debug expression
+Displays the current state of displaying @value{GDBN} expression
+debugging info.
+@kindex set debug overload
+@item set debug overload
+Turns on or off display of @value{GDBN} C@t{++} overload debugging
+info. This includes info such as ranking of functions, etc. The default
+is off.
+@kindex show debug overload
+@item show debug overload
+Displays the current state of displaying @value{GDBN} C@t{++} overload
+debugging info.
+@kindex set debug remote
+@cindex packets, reporting on stdout
+@cindex serial connections, debugging
+@item set debug remote
+Turns on or off display of reports on all packets sent back and forth across
+the serial line to the remote machine. The info is printed on the
+@value{GDBN} standard output stream. The default is off.
+@kindex show debug remote
+@item show debug remote
+Displays the state of display of remote packets.
+@kindex set debug serial
+@item set debug serial
+Turns on or off display of @value{GDBN} serial debugging info. The
+default is off.
+@kindex show debug serial
+@item show debug serial
+Displays the current state of displaying @value{GDBN} serial debugging
+info.
+@kindex set debug target
+@item set debug target
+Turns on or off display of @value{GDBN} target debugging info. This info
+includes what is going on at the target level of GDB, as it happens. The
+default is off.
+@kindex show debug target
+@item show debug target
+Displays the current state of displaying @value{GDBN} target debugging
+info.
+@kindex set debug varobj
+@item set debug varobj
+Turns on or off display of @value{GDBN} variable object debugging
+info. The default is off.
+@kindex show debug varobj
+@item show debug varobj
+Displays the current state of displaying @value{GDBN} variable object
+debugging info.
+@end table
-@kindex target sparclite
-@item target sparclite @var{dev}
-Fujitsu sparclite boards, used only for the purpose of loading.
-You must use an additional command to debug the program.
-For example: target remote @var{dev} using @value{GDBN} standard
-remote protocol.
+@node Sequences
+@chapter Canned Sequences of Commands
-@end table
+Aside from breakpoint commands (@pxref{Break Commands, ,Breakpoint
+command lists}), @value{GDBN} provides two ways to store sequences of
+commands for execution as a unit: user-defined commands and command
+files.
-@node ST2000
-@subsection Tandem ST2000
+@menu
+* Define:: User-defined commands
+* Hooks:: User-defined command hooks
+* Command Files:: Command files
+* Output:: Commands for controlled output
+@end menu
-@value{GDBN} may be used with a Tandem ST2000 phone switch, running Tandem's
-STDBUG protocol.
+@node Define
+@section User-defined commands
-To connect your ST2000 to the host system, see the manufacturer's
-manual. Once the ST2000 is physically attached, you can run:
+@cindex user-defined command
+A @dfn{user-defined command} is a sequence of @value{GDBN} commands to
+which you assign a new name as a command. This is done with the
+@code{define} command. User commands may accept up to 10 arguments
+separated by whitespace. Arguments are accessed within the user command
+via @var{$arg0@dots{}$arg9}. A trivial example:
-@example
-target st2000 @var{dev} @var{speed}
-@end example
+@smallexample
+define adder
+ print $arg0 + $arg1 + $arg2
+@end smallexample
@noindent
-to establish it as your debugging environment. @var{dev} is normally
-the name of a serial device, such as @file{/dev/ttya}, connected to the
-ST2000 via a serial line. You can instead specify @var{dev} as a TCP
-connection (for example, to a serial line attached via a terminal
-concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}.
+To execute the command use:
-The @code{load} and @code{attach} commands are @emph{not} defined for
-this target; you must load your program into the ST2000 as you normally
-would for standalone operation. @value{GDBN} reads debugging information
-(such as symbols) from a separate, debugging version of the program
-available on your host computer.
-@c FIXME!! This is terribly vague; what little content is here is
-@c basically hearsay.
+@smallexample
+adder 1 2 3
+@end smallexample
-@cindex ST2000 auxiliary commands
-These auxiliary @value{GDBN} commands are available to help you with the ST2000
-environment:
+@noindent
+This defines the command @code{adder}, which prints the sum of
+its three arguments. Note the arguments are text substitutions, so they may
+reference variables, use complex expressions, or even perform inferior
+functions calls.
@table @code
-@item st2000 @var{command}
-@kindex st2000 @var{cmd}
-@cindex STDBUG commands (ST2000)
-@cindex commands to STDBUG (ST2000)
-Send a @var{command} to the STDBUG monitor. See the manufacturer's
-manual for available commands.
-
-@item connect
-@cindex connect (to STDBUG)
-Connect the controlling terminal to the STDBUG command monitor. When
-you are done interacting with STDBUG, typing either of two character
-sequences gets you back to the @value{GDBN} command prompt:
-@kbd{@key{RET}~.} (Return, followed by tilde and period) or
-@kbd{@key{RET}~@key{C-d}} (Return, followed by tilde and control-D).
-@end table
-
-@node Z8000
-@subsection Zilog Z8000
-
-@cindex Z8000
-@cindex simulator, Z8000
-@cindex Zilog Z8000 simulator
-
-When configured for debugging Zilog Z8000 targets, @value{GDBN} includes
-a Z8000 simulator.
-For the Z8000 family, @samp{target sim} simulates either the Z8002 (the
-unsegmented variant of the Z8000 architecture) or the Z8001 (the
-segmented variant). The simulator recognizes which architecture is
-appropriate by inspecting the object code.
+@kindex define
+@item define @var{commandname}
+Define a command named @var{commandname}. If there is already a command
+by that name, you are asked to confirm that you want to redefine it.
-@table @code
-@item target sim @var{args}
-@kindex sim
-@kindex target sim@r{, with Z8000}
-Debug programs on a simulated CPU. If the simulator supports setup
-options, specify them via @var{args}.
-@end table
+The definition of the command is made up of other @value{GDBN} command lines,
+which are given following the @code{define} command. The end of these
+commands is marked by a line containing @code{end}.
-@noindent
-After specifying this target, you can debug programs for the simulated
-CPU in the same style as programs for your host computer; use the
-@code{file} command to load a new program image, the @code{run} command
-to run your program, and so on.
+@kindex if
+@kindex else
+@item if
+Takes a single argument, which is an expression to evaluate.
+It is followed by a series of commands that are executed
+only if the expression is true (nonzero).
+There can then optionally be a line @code{else}, followed
+by a series of commands that are only executed if the expression
+was false. The end of the list is marked by a line containing @code{end}.
-As well as making available all the usual machine registers
-(@pxref{Registers, ,Registers}), the Z8000 simulator provides three
-additional items of information as specially named registers:
+@kindex while
+@item while
+The syntax is similar to @code{if}: the command takes a single argument,
+which is an expression to evaluate, and must be followed by the commands to
+execute, one per line, terminated by an @code{end}.
+The commands are executed repeatedly as long as the expression
+evaluates to true.
-@table @code
+@kindex document
+@item document @var{commandname}
+Document the user-defined command @var{commandname}, so that it can be
+accessed by @code{help}. The command @var{commandname} must already be
+defined. This command reads lines of documentation just as @code{define}
+reads the lines of the command definition, ending with @code{end}.
+After the @code{document} command is finished, @code{help} on command
+@var{commandname} displays the documentation you have written.
-@item cycles
-Counts clock-ticks in the simulator.
+You may use the @code{document} command again to change the
+documentation of a command. Redefining the command with @code{define}
+does not change the documentation.
-@item insts
-Counts instructions run in the simulator.
+@kindex help user-defined
+@item help user-defined
+List all user-defined commands, with the first line of the documentation
+(if any) for each.
-@item time
-Execution time in 60ths of a second.
+@kindex show user
+@item show user
+@itemx show user @var{commandname}
+Display the @value{GDBN} commands used to define @var{commandname} (but
+not its documentation). If no @var{commandname} is given, display the
+definitions for all user-defined commands.
@end table
-You can refer to these values in @value{GDBN} expressions with the usual
-conventions; for example, @w{@samp{b fputc if $cycles>5000}} sets a
-conditional breakpoint that suspends only after at least 5000
-simulated clock ticks.
+When user-defined commands are executed, the
+commands of the definition are not printed. An error in any command
+stops execution of the user-defined command.
-@node Architectures
-@section Architectures
+If used interactively, commands that would ask for confirmation proceed
+without asking when used inside a user-defined command. Many @value{GDBN}
+commands that normally print messages to say what they are doing omit the
+messages when used in a user-defined command.
-This section describes characteristics of architectures that affect
-all uses of @value{GDBN} with the architecture, both native and cross.
+@node Hooks
+@section User-defined command hooks
+@cindex command hooks
+@cindex hooks, for commands
+@cindex hooks, pre-command
-@menu
-* A29K::
-* Alpha::
-* MIPS::
-@end menu
+@kindex hook
+@kindex hook-
+You may define @dfn{hooks}, which are a special kind of user-defined
+command. Whenever you run the command @samp{foo}, if the user-defined
+command @samp{hook-foo} exists, it is executed (with no arguments)
+before that command.
-@node A29K
-@subsection A29K
+@cindex hooks, post-command
+@kindex hookpost
+@kindex hookpost-
+A hook may also be defined which is run after the command you executed.
+Whenever you run the command @samp{foo}, if the user-defined command
+@samp{hookpost-foo} exists, it is executed (with no arguments) after
+that command. Post-execution hooks may exist simultaneously with
+pre-execution hooks, for the same command.
-@table @code
+It is valid for a hook to call the command which it hooks. If this
+occurs, the hook is not re-executed, thereby avoiding infinte recursion.
-@kindex set rstack_high_address
-@cindex AMD 29K register stack
-@cindex register stack, AMD29K
-@item set rstack_high_address @var{address}
-On AMD 29000 family processors, registers are saved in a separate
-@dfn{register stack}. There is no way for @value{GDBN} to determine the
-extent of this stack. Normally, @value{GDBN} just assumes that the
-stack is ``large enough''. This may result in @value{GDBN} referencing
-memory locations that do not exist. If necessary, you can get around
-this problem by specifying the ending address of the register stack with
-the @code{set rstack_high_address} command. The argument should be an
-address, which you probably want to precede with @samp{0x} to specify in
-hexadecimal.
+@c It would be nice if hookpost could be passed a parameter indicating
+@c if the command it hooks executed properly or not. FIXME!
-@kindex show rstack_high_address
-@item show rstack_high_address
-Display the current limit of the register stack, on AMD 29000 family
-processors.
+@kindex stop@r{, a pseudo-command}
+In addition, a pseudo-command, @samp{stop} exists. Defining
+(@samp{hook-stop}) makes the associated commands execute every time
+execution stops in your program: before breakpoint commands are run,
+displays are printed, or the stack frame is printed.
-@end table
+For example, to ignore @code{SIGALRM} signals while
+single-stepping, but treat them normally during normal execution,
+you could define:
-@node Alpha
-@subsection Alpha
+@example
+define hook-stop
+handle SIGALRM nopass
+end
-See the following section.
+define hook-run
+handle SIGALRM pass
+end
-@node MIPS
-@subsection MIPS
+define hook-continue
+handle SIGLARM pass
+end
+@end example
-@cindex stack on Alpha
-@cindex stack on MIPS
-@cindex Alpha stack
-@cindex MIPS stack
-Alpha- and MIPS-based computers use an unusual stack frame, which
-sometimes requires @value{GDBN} to search backward in the object code to
-find the beginning of a function.
+As a further example, to hook at the begining and end of the @code{echo}
+command, and to add extra text to the beginning and end of the message,
+you could define:
-@cindex response time, MIPS debugging
-To improve response time (especially for embedded applications, where
-@value{GDBN} may be restricted to a slow serial line for this search)
-you may want to limit the size of this search, using one of these
-commands:
+@example
+define hook-echo
+echo <<<---
+end
-@table @code
-@cindex @code{heuristic-fence-post} (Alpha, MIPS)
-@item set heuristic-fence-post @var{limit}
-Restrict @value{GDBN} to examining at most @var{limit} bytes in its
-search for the beginning of a function. A value of @var{0} (the
-default) means there is no limit. However, except for @var{0}, the
-larger the limit the more bytes @code{heuristic-fence-post} must search
-and therefore the longer it takes to run.
+define hookpost-echo
+echo --->>>\n
+end
-@item show heuristic-fence-post
-Display the current limit.
-@end table
+(@value{GDBP}) echo Hello World
+<<<---Hello World--->>>
+(@value{GDBP})
-@noindent
-These commands are available @emph{only} when @value{GDBN} is configured
-for debugging programs on Alpha or MIPS processors.
+@end example
+You can define a hook for any single-word command in @value{GDBN}, but
+not for command aliases; you should define a hook for the basic command
+name, e.g. @code{backtrace} rather than @code{bt}.
+@c FIXME! So how does Joe User discover whether a command is an alias
+@c or not?
+If an error occurs during the execution of your hook, execution of
+@value{GDBN} commands stops and @value{GDBN} issues a prompt
+(before the command that you actually typed had a chance to run).
-@node Controlling GDB
-@chapter Controlling @value{GDBN}
+If you try to define a hook which does not match any known command, you
+get a warning from the @code{define} command.
-You can alter the way @value{GDBN} interacts with you by using the
-@code{set} command. For commands controlling how @value{GDBN} displays
-data, see @ref{Print Settings, ,Print settings}. Other settings are
-described here.
+@node Command Files
+@section Command files
-@menu
-* Prompt:: Prompt
-* Editing:: Command editing
-* History:: Command history
-* Screen Size:: Screen size
-* Numbers:: Numbers
-* Messages/Warnings:: Optional warnings and messages
-* Debugging Output:: Optional messages about internal happenings
-@end menu
+@cindex command files
+A command file for @value{GDBN} is a file of lines that are @value{GDBN}
+commands. Comments (lines starting with @kbd{#}) may also be included.
+An empty line in a command file does nothing; it does not mean to repeat
+the last command, as it would from the terminal.
-@node Prompt
-@section Prompt
+@cindex init file
+@cindex @file{.gdbinit}
+@cindex @file{gdb.ini}
+When you start @value{GDBN}, it automatically executes commands from its
+@dfn{init files}, normally called @file{.gdbinit}@footnote{The DJGPP
+port of @value{GDBN} uses the name @file{gdb.ini} instead, due to the
+limitations of file names imposed by DOS filesystems.}.
+During startup, @value{GDBN} does the following:
-@cindex prompt
+@enumerate
+@item
+Reads the init file (if any) in your home directory@footnote{On
+DOS/Windows systems, the home directory is the one pointed to by the
+@code{HOME} environment variable.}.
-@value{GDBN} indicates its readiness to read a command by printing a string
-called the @dfn{prompt}. This string is normally @samp{(@value{GDBP})}. You
-can change the prompt string with the @code{set prompt} command. For
-instance, when debugging @value{GDBN} with @value{GDBN}, it is useful to change
-the prompt in one of the @value{GDBN} sessions so that you can always tell
-which one you are talking to.
+@item
+Processes command line options and operands.
-@emph{Note:} @code{set prompt} does not add a space for you after the
-prompt you set. This allows you to set a prompt which ends in a space
-or a prompt that does not.
+@item
+Reads the init file (if any) in the current working directory.
-@table @code
-@kindex set prompt
-@item set prompt @var{newprompt}
-Directs @value{GDBN} to use @var{newprompt} as its prompt string henceforth.
+@item
+Reads command files specified by the @samp{-x} option.
+@end enumerate
-@kindex show prompt
-@item show prompt
-Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}}
-@end table
+The init file in your home directory can set options (such as @samp{set
+complaints}) that affect subsequent processing of command line options
+and operands. Init files are not executed if you use the @samp{-nx}
+option (@pxref{Mode Options, ,Choosing modes}).
-@node Editing
-@section Command editing
-@cindex readline
-@cindex command line editing
+@cindex init file name
+On some configurations of @value{GDBN}, the init file is known by a
+different name (these are typically environments where a specialized
+form of @value{GDBN} may need to coexist with other forms, hence a
+different name for the specialized version's init file). These are the
+environments with special init file names:
-@value{GDBN} reads its input commands via the @dfn{readline} interface. This
-@sc{gnu} library provides consistent behavior for programs which provide a
-command line interface to the user. Advantages are @sc{gnu} Emacs-style
-or @dfn{vi}-style inline editing of commands, @code{csh}-like history
-substitution, and a storage and recall of command history across
-debugging sessions.
+@cindex @file{.vxgdbinit}
+@itemize @bullet
+@item
+VxWorks (Wind River Systems real-time OS): @file{.vxgdbinit}
-You may control the behavior of command line editing in @value{GDBN} with the
-command @code{set}.
+@cindex @file{.os68gdbinit}
+@item
+OS68K (Enea Data Systems real-time OS): @file{.os68gdbinit}
-@table @code
-@kindex set editing
-@cindex editing
-@item set editing
-@itemx set editing on
-Enable command line editing (enabled by default).
+@cindex @file{.esgdbinit}
+@item
+ES-1800 (Ericsson Telecom AB M68000 emulator): @file{.esgdbinit}
+@end itemize
-@item set editing off
-Disable command line editing.
+You can also request the execution of a command file with the
+@code{source} command:
-@kindex show editing
-@item show editing
-Show whether command line editing is enabled.
+@table @code
+@kindex source
+@item source @var{filename}
+Execute the command file @var{filename}.
@end table
-@node History
-@section Command history
-
-@value{GDBN} can keep track of the commands you type during your
-debugging sessions, so that you can be certain of precisely what
-happened. Use these commands to manage the @value{GDBN} command
-history facility.
-
-@table @code
-@cindex history substitution
-@cindex history file
-@kindex set history filename
-@kindex GDBHISTFILE
-@item set history filename @var{fname}
-Set the name of the @value{GDBN} command history file to @var{fname}.
-This is the file where @value{GDBN} reads an initial command history
-list, and where it writes the command history from this session when it
-exits. You can access this list through history expansion or through
-the history command editing characters listed below. This file defaults
-to the value of the environment variable @code{GDBHISTFILE}, or to
-@file{./.gdb_history} (@file{./_gdb_history} on MS-DOS) if this variable
-is not set.
+The lines in a command file are executed sequentially. They are not
+printed as they are executed. An error in any command terminates execution
+of the command file.
-@cindex history save
-@kindex set history save
-@item set history save
-@itemx set history save on
-Record command history in a file, whose name may be specified with the
-@code{set history filename} command. By default, this option is disabled.
+Commands that would ask for confirmation if used interactively proceed
+without asking when used in a command file. Many @value{GDBN} commands that
+normally print messages to say what they are doing omit the messages
+when called from command files.
-@item set history save off
-Stop recording command history in a file.
+@value{GDBN} also accepts command input from standard input. In this
+mode, normal output goes to standard output and error output goes to
+standard error. Errors in a command file supplied on standard input do
+not terminate execution of the command file --- execution continues with
+the next command.
-@cindex history size
-@kindex set history size
-@item set history size @var{size}
-Set the number of commands which @value{GDBN} keeps in its history list.
-This defaults to the value of the environment variable
-@code{HISTSIZE}, or to 256 if this variable is not set.
-@end table
+@example
+gdb < cmds > log 2>&1
+@end example
-@cindex history expansion
-History expansion assigns special meaning to the character @kbd{!}.
-@ifset have-readline-appendices
-@xref{Event Designators}.
-@end ifset
+(The syntax above will vary depending on the shell used.) This example
+will execute commands from the file @file{cmds}. All output and errors
+would be directed to @file{log}.
-Since @kbd{!} is also the logical not operator in C, history expansion
-is off by default. If you decide to enable history expansion with the
-@code{set history expansion on} command, you may sometimes need to
-follow @kbd{!} (when it is used as logical not, in an expression) with
-a space or a tab to prevent it from being expanded. The readline
-history facilities do not attempt substitution on the strings
-@kbd{!=} and @kbd{!(}, even when history expansion is enabled.
+@node Output
+@section Commands for controlled output
-The commands to control history expansion are:
+During the execution of a command file or a user-defined command, normal
+@value{GDBN} output is suppressed; the only output that appears is what is
+explicitly printed by the commands in the definition. This section
+describes three commands useful for generating exactly the output you
+want.
@table @code
-@kindex set history expansion
-@item set history expansion on
-@itemx set history expansion
-Enable history expansion. History expansion is off by default.
-
-@item set history expansion off
-Disable history expansion.
+@kindex echo
+@item echo @var{text}
+@c I do not consider backslash-space a standard C escape sequence
+@c because it is not in ANSI.
+Print @var{text}. Nonprinting characters can be included in
+@var{text} using C escape sequences, such as @samp{\n} to print a
+newline. @strong{No newline is printed unless you specify one.}
+In addition to the standard C escape sequences, a backslash followed
+by a space stands for a space. This is useful for displaying a
+string with spaces at the beginning or the end, since leading and
+trailing spaces are otherwise trimmed from all arguments.
+To print @samp{@w{ }and foo =@w{ }}, use the command
+@samp{echo \@w{ }and foo = \@w{ }}.
-The readline code comes with more complete documentation of
-editing and history expansion features. Users unfamiliar with @sc{gnu} Emacs
-or @code{vi} may wish to read it.
-@ifset have-readline-appendices
-@xref{Command Line Editing}.
-@end ifset
+A backslash at the end of @var{text} can be used, as in C, to continue
+the command onto subsequent lines. For example,
-@c @group
-@kindex show history
-@item show history
-@itemx show history filename
-@itemx show history save
-@itemx show history size
-@itemx show history expansion
-These commands display the state of the @value{GDBN} history parameters.
-@code{show history} by itself displays all four states.
-@c @end group
-@end table
+@example
+echo This is some text\n\
+which is continued\n\
+onto several lines.\n
+@end example
-@table @code
-@kindex shows
-@item show commands
-Display the last ten commands in the command history.
+produces the same output as
-@item show commands @var{n}
-Print ten commands centered on command number @var{n}.
+@example
+echo This is some text\n
+echo which is continued\n
+echo onto several lines.\n
+@end example
-@item show commands +
-Print ten commands just after the commands last printed.
-@end table
+@kindex output
+@item output @var{expression}
+Print the value of @var{expression} and nothing but that value: no
+newlines, no @samp{$@var{nn} = }. The value is not entered in the
+value history either. @xref{Expressions, ,Expressions}, for more information
+on expressions.
-@node Screen Size
-@section Screen size
-@cindex size of screen
-@cindex pauses in output
+@item output/@var{fmt} @var{expression}
+Print the value of @var{expression} in format @var{fmt}. You can use
+the same formats as for @code{print}. @xref{Output Formats,,Output
+formats}, for more information.
-Certain commands to @value{GDBN} may produce large amounts of
-information output to the screen. To help you read all of it,
-@value{GDBN} pauses and asks you for input at the end of each page of
-output. Type @key{RET} when you want to continue the output, or @kbd{q}
-to discard the remaining output. Also, the screen width setting
-determines when to wrap lines of output. Depending on what is being
-printed, @value{GDBN} tries to break the line at a readable place,
-rather than simply letting it overflow onto the following line.
+@kindex printf
+@item printf @var{string}, @var{expressions}@dots{}
+Print the values of the @var{expressions} under the control of
+@var{string}. The @var{expressions} are separated by commas and may be
+either numbers or pointers. Their values are printed as specified by
+@var{string}, exactly as if your program were to execute the C
+subroutine
+@c FIXME: the above implies that at least all ANSI C formats are
+@c supported, but it isn't true: %E and %G don't work (or so it seems).
+@c Either this is a bug, or the manual should document what formats are
+@c supported.
-Normally @value{GDBN} knows the size of the screen from the terminal
-driver software. For example, on Unix @value{GDBN} uses the termcap data base
-together with the value of the @code{TERM} environment variable and the
-@code{stty rows} and @code{stty cols} settings. If this is not correct,
-you can override it with the @code{set height} and @code{set
-width} commands:
+@example
+printf (@var{string}, @var{expressions}@dots{});
+@end example
-@table @code
-@kindex set height
-@kindex set width
-@kindex show width
-@kindex show height
-@item set height @var{lpp}
-@itemx show height
-@itemx set width @var{cpl}
-@itemx show width
-These @code{set} commands specify a screen height of @var{lpp} lines and
-a screen width of @var{cpl} characters. The associated @code{show}
-commands display the current settings.
+For example, you can print two values in hex like this:
-If you specify a height of zero lines, @value{GDBN} does not pause during
-output no matter how long the output is. This is useful if output is to a
-file or to an editor buffer.
+@smallexample
+printf "foo, bar-foo = 0x%x, 0x%x\n", foo, bar-foo
+@end smallexample
-Likewise, you can specify @samp{set width 0} to prevent @value{GDBN}
-from wrapping its output.
+The only backslash-escape sequences that you can use in the format
+string are the simple ones that consist of backslash followed by a
+letter.
@end table
-@node Numbers
-@section Numbers
-@cindex number representation
-@cindex entering numbers
-
-You can always enter numbers in octal, decimal, or hexadecimal in
-@value{GDBN} by the usual conventions: octal numbers begin with
-@samp{0}, decimal numbers end with @samp{.}, and hexadecimal numbers
-begin with @samp{0x}. Numbers that begin with none of these are, by
-default, entered in base 10; likewise, the default display for
-numbers---when no particular format is specified---is base 10. You can
-change the default base for both input and output with the @code{set
-radix} command.
+@node TUI
+@chapter @value{GDBN} Text User Interface
+@cindex TUI
-@table @code
-@kindex set input-radix
-@item set input-radix @var{base}
-Set the default base for numeric input. Supported choices
-for @var{base} are decimal 8, 10, or 16. @var{base} must itself be
-specified either unambiguously or using the current default radix; for
-example, any of
+@menu
+* TUI Overview:: TUI overview
+* TUI Keys:: TUI key bindings
+* TUI Commands:: TUI specific commands
+* TUI Configuration:: TUI configuration variables
+@end menu
-@smallexample
-set radix 012
-set radix 10.
-set radix 0xa
-@end smallexample
+The @value{GDBN} Text User Interface, TUI in short,
+is a terminal interface which uses the @code{curses} library
+to show the source file, the assembly output, the program registers
+and @value{GDBN} commands in separate text windows.
+The TUI is available only when @value{GDBN} is configured
+with the @code{--enable-tui} configure option (@pxref{Configure Options}).
-@noindent
-sets the base to decimal. On the other hand, @samp{set radix 10}
-leaves the radix unchanged no matter what it was.
+@node TUI Overview
+@section TUI overview
-@kindex set output-radix
-@item set output-radix @var{base}
-Set the default base for numeric display. Supported choices
-for @var{base} are decimal 8, 10, or 16. @var{base} must itself be
-specified either unambiguously or using the current default radix.
+The TUI has two display modes that can be switched while
+@value{GDBN} runs:
-@kindex show input-radix
-@item show input-radix
-Display the current default base for numeric input.
+@itemize @bullet
+@item
+A curses (or TUI) mode in which it displays several text
+windows on the terminal.
-@kindex show output-radix
-@item show output-radix
-Display the current default base for numeric display.
-@end table
+@item
+A standard mode which corresponds to the @value{GDBN} configured without
+the TUI.
+@end itemize
-@node Messages/Warnings
-@section Optional warnings and messages
+In the TUI mode, @value{GDBN} can display several text window
+on the terminal:
-By default, @value{GDBN} is silent about its inner workings. If you are
-running on a slow machine, you may want to use the @code{set verbose}
-command. This makes @value{GDBN} tell you when it does a lengthy
-internal operation, so you will not think it has crashed.
+@table @emph
+@item command
+This window is the @value{GDBN} command window with the @value{GDBN}
+prompt and the @value{GDBN} outputs. The @value{GDBN} input is still
+managed using readline but through the TUI. The @emph{command}
+window is always visible.
-Currently, the messages controlled by @code{set verbose} are those
-which announce that the symbol table for a source file is being read;
-see @code{symbol-file} in @ref{Files, ,Commands to specify files}.
+@item source
+The source window shows the source file of the program. The current
+line as well as active breakpoints are displayed in this window.
+The current program position is shown with the @samp{>} marker and
+active breakpoints are shown with @samp{*} markers.
-@table @code
-@kindex set verbose
-@item set verbose on
-Enables @value{GDBN} output of certain informational messages.
+@item assembly
+The assembly window shows the disassembly output of the program.
-@item set verbose off
-Disables @value{GDBN} output of certain informational messages.
+@item register
+This window shows the processor registers. It detects when
+a register is changed and when this is the case, registers that have
+changed are highlighted.
-@kindex show verbose
-@item show verbose
-Displays whether @code{set verbose} is on or off.
@end table
-By default, if @value{GDBN} encounters bugs in the symbol table of an
-object file, it is silent; but if you are debugging a compiler, you may
-find this information useful (@pxref{Symbol Errors, ,Errors reading
-symbol files}).
+The source, assembly and register windows are attached to the thread
+and the frame position. They are updated when the current thread
+changes, when the frame changes or when the program counter changes.
+These three windows are arranged by the TUI according to several
+layouts. The layout defines which of these three windows are visible.
+The following layouts are available:
-@table @code
+@itemize @bullet
+@item
+source
-@kindex set complaints
-@item set complaints @var{limit}
-Permits @value{GDBN} to output @var{limit} complaints about each type of
-unusual symbols before becoming silent about the problem. Set
-@var{limit} to zero to suppress all complaints; set it to a large number
-to prevent complaints from being suppressed.
+@item
+assembly
+
+@item
+source and assembly
+
+@item
+source and registers
-@kindex show complaints
-@item show complaints
-Displays how many symbol complaints @value{GDBN} is permitted to produce.
+@item
+assembly and registers
-@end table
+@end itemize
-By default, @value{GDBN} is cautious, and asks what sometimes seems to be a
-lot of stupid questions to confirm certain commands. For example, if
-you try to run a program which is already running:
+@node TUI Keys
+@section TUI Key Bindings
+@cindex TUI key bindings
-@example
-(@value{GDBP}) run
-The program being debugged has been started already.
-Start it from the beginning? (y or n)
-@end example
+The TUI installs several key bindings in the readline keymaps
+(@pxref{Command Line Editing}).
+They allow to leave or enter in the TUI mode or they operate
+directly on the TUI layout and windows. The following key bindings
+are installed for both TUI mode and the @value{GDBN} standard mode.
-If you are willing to unflinchingly face the consequences of your own
-commands, you can disable this ``feature'':
+@table @kbd
+@kindex C-x C-a
+@item C-x C-a
+@kindex C-x a
+@itemx C-x a
+@kindex C-x A
+@itemx C-x A
+Enter or leave the TUI mode. When the TUI mode is left,
+the curses window management is left and @value{GDBN} operates using
+its standard mode writing on the terminal directly. When the TUI
+mode is entered, the control is given back to the curses windows.
+The screen is then refreshed.
-@table @code
+@kindex C-x 1
+@item C-x 1
+Use a TUI layout with only one window. The layout will
+either be @samp{source} or @samp{assembly}. When the TUI mode
+is not active, it will switch to the TUI mode.
-@kindex set confirm
-@cindex flinching
-@cindex confirmation
-@cindex stupid questions
-@item set confirm off
-Disables confirmation requests.
+Think of this key binding as the Emacs @kbd{C-x 1} binding.
-@item set confirm on
-Enables confirmation requests (the default).
+@kindex C-x 2
+@item C-x 2
+Use a TUI layout with at least two windows. When the current
+layout shows already two windows, a next layout with two windows is used.
+When a new layout is chosen, one window will always be common to the
+previous layout and the new one.
-@kindex show confirm
-@item show confirm
-Displays state of confirmation requests.
+Think of it as the Emacs @kbd{C-x 2} binding.
@end table
-@node Debugging Output
-@section Optional messages about internal happenings
-@table @code
-@kindex set debug arch
-@item set debug arch
-Turns on or off display of gdbarch debugging info. The default is off
-@kindex show debug arch
-@item show debug arch
-Displays the current state of displaying gdbarch debugging info.
-@kindex set debug event
-@item set debug event
-Turns on or off display of @value{GDBN} event debugging info. The
-default is off.
-@kindex show debug event
-@item show debug event
-Displays the current state of displaying @value{GDBN} event debugging
-info.
-@kindex set debug expression
-@item set debug expression
-Turns on or off display of @value{GDBN} expression debugging info. The
-default is off.
-@kindex show debug expression
-@item show debug expression
-Displays the current state of displaying @value{GDBN} expression
-debugging info.
-@kindex set debug overload
-@item set debug overload
-Turns on or off display of @value{GDBN} C@t{++} overload debugging
-info. This includes info such as ranking of functions, etc. The default
-is off.
-@kindex show debug overload
-@item show debug overload
-Displays the current state of displaying @value{GDBN} C@t{++} overload
-debugging info.
-@kindex set debug remote
-@cindex packets, reporting on stdout
-@cindex serial connections, debugging
-@item set debug remote
-Turns on or off display of reports on all packets sent back and forth across
-the serial line to the remote machine. The info is printed on the
-@value{GDBN} standard output stream. The default is off.
-@kindex show debug remote
-@item show debug remote
-Displays the state of display of remote packets.
-@kindex set debug serial
-@item set debug serial
-Turns on or off display of @value{GDBN} serial debugging info. The
-default is off.
-@kindex show debug serial
-@item show debug serial
-Displays the current state of displaying @value{GDBN} serial debugging
-info.
-@kindex set debug target
-@item set debug target
-Turns on or off display of @value{GDBN} target debugging info. This info
-includes what is going on at the target level of GDB, as it happens. The
-default is off.
-@kindex show debug target
-@item show debug target
-Displays the current state of displaying @value{GDBN} target debugging
-info.
-@kindex set debug varobj
-@item set debug varobj
-Turns on or off display of @value{GDBN} variable object debugging
-info. The default is off.
-@kindex show debug varobj
-@item show debug varobj
-Displays the current state of displaying @value{GDBN} variable object
-debugging info.
-@end table
+The following key bindings are handled only by the TUI mode:
-@node Sequences
-@chapter Canned Sequences of Commands
+@table @key
+@kindex PgUp
+@item PgUp
+Scroll the active window one page up.
-Aside from breakpoint commands (@pxref{Break Commands, ,Breakpoint
-command lists}), @value{GDBN} provides two ways to store sequences of
-commands for execution as a unit: user-defined commands and command
-files.
+@kindex PgDn
+@item PgDn
+Scroll the active window one page down.
-@menu
-* Define:: User-defined commands
-* Hooks:: User-defined command hooks
-* Command Files:: Command files
-* Output:: Commands for controlled output
-@end menu
+@kindex Up
+@item Up
+Scroll the active window one line up.
-@node Define
-@section User-defined commands
+@kindex Down
+@item Down
+Scroll the active window one line down.
-@cindex user-defined command
-A @dfn{user-defined command} is a sequence of @value{GDBN} commands to
-which you assign a new name as a command. This is done with the
-@code{define} command. User commands may accept up to 10 arguments
-separated by whitespace. Arguments are accessed within the user command
-via @var{$arg0@dots{}$arg9}. A trivial example:
+@kindex Left
+@item Left
+Scroll the active window one column left.
-@smallexample
-define adder
- print $arg0 + $arg1 + $arg2
-@end smallexample
+@kindex Right
+@item Right
+Scroll the active window one column right.
-@noindent
-To execute the command use:
+@kindex C-L
+@item C-L
+Refresh the screen.
-@smallexample
-adder 1 2 3
-@end smallexample
+@end table
-@noindent
-This defines the command @code{adder}, which prints the sum of
-its three arguments. Note the arguments are text substitutions, so they may
-reference variables, use complex expressions, or even perform inferior
-functions calls.
+In the TUI mode, the arrow keys are used by the active window
+for scrolling. This means they are not available for readline. It is
+necessary to use other readline key bindings such as @key{C-p}, @key{C-n},
+@key{C-b} and @key{C-f}.
+
+@node TUI Commands
+@section TUI specific commands
+@cindex TUI commands
+
+The TUI has specific commands to control the text windows.
+These commands are always available, that is they do not depend on
+the current terminal mode in which @value{GDBN} runs. When @value{GDBN}
+is in the standard mode, using these commands will automatically switch
+in the TUI mode.
@table @code
+@item layout next
+@kindex layout next
+Display the next layout.
-@kindex define
-@item define @var{commandname}
-Define a command named @var{commandname}. If there is already a command
-by that name, you are asked to confirm that you want to redefine it.
+@item layout prev
+@kindex layout prev
+Display the previous layout.
-The definition of the command is made up of other @value{GDBN} command lines,
-which are given following the @code{define} command. The end of these
-commands is marked by a line containing @code{end}.
+@item layout src
+@kindex layout src
+Display the source window only.
-@kindex if
-@kindex else
-@item if
-Takes a single argument, which is an expression to evaluate.
-It is followed by a series of commands that are executed
-only if the expression is true (nonzero).
-There can then optionally be a line @code{else}, followed
-by a series of commands that are only executed if the expression
-was false. The end of the list is marked by a line containing @code{end}.
+@item layout asm
+@kindex layout asm
+Display the assembly window only.
-@kindex while
-@item while
-The syntax is similar to @code{if}: the command takes a single argument,
-which is an expression to evaluate, and must be followed by the commands to
-execute, one per line, terminated by an @code{end}.
-The commands are executed repeatedly as long as the expression
-evaluates to true.
+@item layout split
+@kindex layout split
+Display the source and assembly window.
-@kindex document
-@item document @var{commandname}
-Document the user-defined command @var{commandname}, so that it can be
-accessed by @code{help}. The command @var{commandname} must already be
-defined. This command reads lines of documentation just as @code{define}
-reads the lines of the command definition, ending with @code{end}.
-After the @code{document} command is finished, @code{help} on command
-@var{commandname} displays the documentation you have written.
+@item layout regs
+@kindex layout regs
+Display the register window together with the source or assembly window.
+
+@item focus next | prev | src | asm | regs | split
+@kindex focus
+Set the focus to the named window.
+This command allows to change the active window so that scrolling keys
+can be affected to another window.
-You may use the @code{document} command again to change the
-documentation of a command. Redefining the command with @code{define}
-does not change the documentation.
+@item refresh
+@kindex refresh
+Refresh the screen. This is similar to using @key{C-L} key.
-@kindex help user-defined
-@item help user-defined
-List all user-defined commands, with the first line of the documentation
-(if any) for each.
+@item update
+@kindex update
+Update the source window and the current execution point.
-@kindex show user
-@item show user
-@itemx show user @var{commandname}
-Display the @value{GDBN} commands used to define @var{commandname} (but
-not its documentation). If no @var{commandname} is given, display the
-definitions for all user-defined commands.
+@item winheight @var{name} +@var{count}
+@itemx winheight @var{name} -@var{count}
+@kindex winheight
+Change the height of the window @var{name} by @var{count}
+lines. Positive counts increase the height, while negative counts
+decrease it.
@end table
-When user-defined commands are executed, the
-commands of the definition are not printed. An error in any command
-stops execution of the user-defined command.
+@node TUI Configuration
+@section TUI configuration variables
+@cindex TUI configuration variables
-If used interactively, commands that would ask for confirmation proceed
-without asking when used inside a user-defined command. Many @value{GDBN}
-commands that normally print messages to say what they are doing omit the
-messages when used in a user-defined command.
+The TUI has several configuration variables that control the
+appearance of windows on the terminal.
-@node Hooks
-@section User-defined command hooks
-@cindex command hooks
-@cindex hooks, for commands
-@cindex hooks, pre-command
+@table @code
+@item set tui border-kind @var{kind}
+@kindex set tui border-kind
+Select the border appearance for the source, assembly and register windows.
+The possible values are the following:
+@table @code
+@item space
+Use a space character to draw the border.
-@kindex hook
-@kindex hook-
-You may define @dfn{hooks}, which are a special kind of user-defined
-command. Whenever you run the command @samp{foo}, if the user-defined
-command @samp{hook-foo} exists, it is executed (with no arguments)
-before that command.
+@item ascii
+Use ascii characters + - and | to draw the border.
-@cindex hooks, post-command
-@kindex hookpost
-@kindex hookpost-
-A hook may also be defined which is run after the command you executed.
-Whenever you run the command @samp{foo}, if the user-defined command
-@samp{hookpost-foo} exists, it is executed (with no arguments) after
-that command. Post-execution hooks may exist simultaneously with
-pre-execution hooks, for the same command.
+@item acs
+Use the Alternate Character Set to draw the border. The border is
+drawn using character line graphics if the terminal supports them.
-It is valid for a hook to call the command which it hooks. If this
-occurs, the hook is not re-executed, thereby avoiding infinte recursion.
+@end table
-@c It would be nice if hookpost could be passed a parameter indicating
-@c if the command it hooks executed properly or not. FIXME!
+@item set tui active-border-mode @var{mode}
+@kindex set tui active-border-mode
+Select the attributes to display the border of the active window.
+The possible values are @code{normal}, @code{standout}, @code{reverse},
+@code{half}, @code{half-standout}, @code{bold} and @code{bold-standout}.
-@kindex stop@r{, a pseudo-command}
-In addition, a pseudo-command, @samp{stop} exists. Defining
-(@samp{hook-stop}) makes the associated commands execute every time
-execution stops in your program: before breakpoint commands are run,
-displays are printed, or the stack frame is printed.
+@item set tui border-mode @var{mode}
+@kindex set tui border-mode
+Select the attributes to display the border of other windows.
+The @var{mode} can be one of the following:
+@table @code
+@item normal
+Use normal attributes to display the border.
-For example, to ignore @code{SIGALRM} signals while
-single-stepping, but treat them normally during normal execution,
-you could define:
+@item standout
+Use standout mode.
-@example
-define hook-stop
-handle SIGALRM nopass
-end
+@item reverse
+Use reverse video mode.
-define hook-run
-handle SIGALRM pass
-end
+@item half
+Use half bright mode.
-define hook-continue
-handle SIGLARM pass
-end
-@end example
+@item half-standout
+Use half bright and standout mode.
-As a further example, to hook at the begining and end of the @code{echo}
-command, and to add extra text to the beginning and end of the message,
-you could define:
+@item bold
+Use extra bright or bold mode.
-@example
-define hook-echo
-echo <<<---
-end
+@item bold-standout
+Use extra bright or bold and standout mode.
-define hookpost-echo
-echo --->>>\n
-end
+@end table
-(@value{GDBP}) echo Hello World
-<<<---Hello World--->>>
-(@value{GDBP})
+@end table
-@end example
+@node Emacs
+@chapter Using @value{GDBN} under @sc{gnu} Emacs
-You can define a hook for any single-word command in @value{GDBN}, but
-not for command aliases; you should define a hook for the basic command
-name, e.g. @code{backtrace} rather than @code{bt}.
-@c FIXME! So how does Joe User discover whether a command is an alias
-@c or not?
-If an error occurs during the execution of your hook, execution of
-@value{GDBN} commands stops and @value{GDBN} issues a prompt
-(before the command that you actually typed had a chance to run).
+@cindex Emacs
+@cindex @sc{gnu} Emacs
+A special interface allows you to use @sc{gnu} Emacs to view (and
+edit) the source files for the program you are debugging with
+@value{GDBN}.
-If you try to define a hook which does not match any known command, you
-get a warning from the @code{define} command.
+To use this interface, use the command @kbd{M-x gdb} in Emacs. Give the
+executable file you want to debug as an argument. This command starts
+@value{GDBN} as a subprocess of Emacs, with input and output through a newly
+created Emacs buffer.
+@c (Do not use the @code{-tui} option to run @value{GDBN} from Emacs.)
-@node Command Files
-@section Command files
+Using @value{GDBN} under Emacs is just like using @value{GDBN} normally except for two
+things:
-@cindex command files
-A command file for @value{GDBN} is a file of lines that are @value{GDBN}
-commands. Comments (lines starting with @kbd{#}) may also be included.
-An empty line in a command file does nothing; it does not mean to repeat
-the last command, as it would from the terminal.
+@itemize @bullet
+@item
+All ``terminal'' input and output goes through the Emacs buffer.
+@end itemize
-@cindex init file
-@cindex @file{.gdbinit}
-@cindex @file{gdb.ini}
-When you start @value{GDBN}, it automatically executes commands from its
-@dfn{init files}, normally called @file{.gdbinit}@footnote{The DJGPP
-port of @value{GDBN} uses the name @file{gdb.ini} instead, due to the
-limitations of file names imposed by DOS filesystems.}.
-During startup, @value{GDBN} does the following:
+This applies both to @value{GDBN} commands and their output, and to the input
+and output done by the program you are debugging.
-@enumerate
-@item
-Reads the init file (if any) in your home directory@footnote{On
-DOS/Windows systems, the home directory is the one pointed to by the
-@code{HOME} environment variable.}.
+This is useful because it means that you can copy the text of previous
+commands and input them again; you can even use parts of the output
+in this way.
-@item
-Processes command line options and operands.
+All the facilities of Emacs' Shell mode are available for interacting
+with your program. In particular, you can send signals the usual
+way---for example, @kbd{C-c C-c} for an interrupt, @kbd{C-c C-z} for a
+stop.
+@itemize @bullet
@item
-Reads the init file (if any) in the current working directory.
+@value{GDBN} displays source code through Emacs.
+@end itemize
-@item
-Reads command files specified by the @samp{-x} option.
-@end enumerate
+Each time @value{GDBN} displays a stack frame, Emacs automatically finds the
+source file for that frame and puts an arrow (@samp{=>}) at the
+left margin of the current line. Emacs uses a separate buffer for
+source display, and splits the screen to show both your @value{GDBN} session
+and the source.
-The init file in your home directory can set options (such as @samp{set
-complaints}) that affect subsequent processing of command line options
-and operands. Init files are not executed if you use the @samp{-nx}
-option (@pxref{Mode Options, ,Choosing modes}).
+Explicit @value{GDBN} @code{list} or search commands still produce output as
+usual, but you probably have no reason to use them from Emacs.
-@cindex init file name
-On some configurations of @value{GDBN}, the init file is known by a
-different name (these are typically environments where a specialized
-form of @value{GDBN} may need to coexist with other forms, hence a
-different name for the specialized version's init file). These are the
-environments with special init file names:
+@quotation
+@emph{Warning:} If the directory where your program resides is not your
+current directory, it can be easy to confuse Emacs about the location of
+the source files, in which case the auxiliary display buffer does not
+appear to show your source. @value{GDBN} can find programs by searching your
+environment's @code{PATH} variable, so the @value{GDBN} input and output
+session proceeds normally; but Emacs does not get enough information
+back from @value{GDBN} to locate the source files in this situation. To
+avoid this problem, either start @value{GDBN} mode from the directory where
+your program resides, or specify an absolute file name when prompted for the
+@kbd{M-x gdb} argument.
-@cindex @file{.vxgdbinit}
-@itemize @bullet
-@item
-VxWorks (Wind River Systems real-time OS): @file{.vxgdbinit}
+A similar confusion can result if you use the @value{GDBN} @code{file} command to
+switch to debugging a program in some other location, from an existing
+@value{GDBN} buffer in Emacs.
+@end quotation
+
+By default, @kbd{M-x gdb} calls the program called @file{gdb}. If
+you need to call @value{GDBN} by a different name (for example, if you keep
+several configurations around, with different names) you can set the
+Emacs variable @code{gdb-command-name}; for example,
+
+@example
+(setq gdb-command-name "mygdb")
+@end example
+
+@noindent
+(preceded by @kbd{M-:} or @kbd{ESC :}, or typed in the @code{*scratch*} buffer, or
+in your @file{.emacs} file) makes Emacs call the program named
+``@code{mygdb}'' instead.
+
+In the @value{GDBN} I/O buffer, you can use these special Emacs commands in
+addition to the standard Shell mode commands:
-@cindex @file{.os68gdbinit}
-@item
-OS68K (Enea Data Systems real-time OS): @file{.os68gdbinit}
+@table @kbd
+@item C-h m
+Describe the features of Emacs' @value{GDBN} Mode.
-@cindex @file{.esgdbinit}
-@item
-ES-1800 (Ericsson Telecom AB M68000 emulator): @file{.esgdbinit}
-@end itemize
+@item M-s
+Execute to another source line, like the @value{GDBN} @code{step} command; also
+update the display window to show the current file and location.
-You can also request the execution of a command file with the
-@code{source} command:
+@item M-n
+Execute to next source line in this function, skipping all function
+calls, like the @value{GDBN} @code{next} command. Then update the display window
+to show the current file and location.
-@table @code
-@kindex source
-@item source @var{filename}
-Execute the command file @var{filename}.
-@end table
+@item M-i
+Execute one instruction, like the @value{GDBN} @code{stepi} command; update
+display window accordingly.
-The lines in a command file are executed sequentially. They are not
-printed as they are executed. An error in any command terminates execution
-of the command file.
+@item M-x gdb-nexti
+Execute to next instruction, using the @value{GDBN} @code{nexti} command; update
+display window accordingly.
-Commands that would ask for confirmation if used interactively proceed
-without asking when used in a command file. Many @value{GDBN} commands that
-normally print messages to say what they are doing omit the messages
-when called from command files.
+@item C-c C-f
+Execute until exit from the selected stack frame, like the @value{GDBN}
+@code{finish} command.
-@value{GDBN} also accepts command input from standard input. In this
-mode, normal output goes to standard output and error output goes to
-standard error. Errors in a command file supplied on standard input do
-not terminate execution of the command file --- execution continues with
-the next command.
+@item M-c
+Continue execution of your program, like the @value{GDBN} @code{continue}
+command.
-@example
-gdb < cmds > log 2>&1
-@end example
+@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-p}.
-(The syntax above will vary depending on the shell used.) This example
-will execute commands from the file @file{cmds}. All output and errors
-would be directed to @file{log}.
+@item M-u
+Go up the number of frames indicated by the numeric argument
+(@pxref{Arguments, , Numeric Arguments, Emacs, The @sc{gnu} Emacs Manual}),
+like the @value{GDBN} @code{up} command.
-@node Output
-@section Commands for controlled output
+@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-u}.
-During the execution of a command file or a user-defined command, normal
-@value{GDBN} output is suppressed; the only output that appears is what is
-explicitly printed by the commands in the definition. This section
-describes three commands useful for generating exactly the output you
-want.
+@item M-d
+Go down the number of frames indicated by the numeric argument, like the
+@value{GDBN} @code{down} command.
-@table @code
-@kindex echo
-@item echo @var{text}
-@c I do not consider backslash-space a standard C escape sequence
-@c because it is not in ANSI.
-Print @var{text}. Nonprinting characters can be included in
-@var{text} using C escape sequences, such as @samp{\n} to print a
-newline. @strong{No newline is printed unless you specify one.}
-In addition to the standard C escape sequences, a backslash followed
-by a space stands for a space. This is useful for displaying a
-string with spaces at the beginning or the end, since leading and
-trailing spaces are otherwise trimmed from all arguments.
-To print @samp{@w{ }and foo =@w{ }}, use the command
-@samp{echo \@w{ }and foo = \@w{ }}.
+@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-d}.
-A backslash at the end of @var{text} can be used, as in C, to continue
-the command onto subsequent lines. For example,
+@item C-x &
+Read the number where the cursor is positioned, and insert it at the end
+of the @value{GDBN} I/O buffer. For example, if you wish to disassemble code
+around an address that was displayed earlier, type @kbd{disassemble};
+then move the cursor to the address display, and pick up the
+argument for @code{disassemble} by typing @kbd{C-x &}.
-@example
-echo This is some text\n\
-which is continued\n\
-onto several lines.\n
-@end example
+You can customize this further by defining elements of the list
+@code{gdb-print-command}; once it is defined, you can format or
+otherwise process numbers picked up by @kbd{C-x &} before they are
+inserted. A numeric argument to @kbd{C-x &} indicates that you
+wish special formatting, and also acts as an index to pick an element of the
+list. If the list element is a string, the number to be inserted is
+formatted using the Emacs function @code{format}; otherwise the number
+is passed as an argument to the corresponding list element.
+@end table
-produces the same output as
+In any source file, the Emacs command @kbd{C-x SPC} (@code{gdb-break})
+tells @value{GDBN} to set a breakpoint on the source line point is on.
-@example
-echo This is some text\n
-echo which is continued\n
-echo onto several lines.\n
-@end example
+If you accidentally delete the source-display buffer, an easy way to get
+it back is to type the command @code{f} in the @value{GDBN} buffer, to
+request a frame display; when you run under Emacs, this recreates
+the source buffer if necessary to show you the context of the current
+frame.
-@kindex output
-@item output @var{expression}
-Print the value of @var{expression} and nothing but that value: no
-newlines, no @samp{$@var{nn} = }. The value is not entered in the
-value history either. @xref{Expressions, ,Expressions}, for more information
-on expressions.
+The source files displayed in Emacs are in ordinary Emacs buffers
+which are visiting the source files in the usual way. You can edit
+the files with these buffers if you wish; but keep in mind that @value{GDBN}
+communicates with Emacs in terms of line numbers. If you add or
+delete lines from the text, the line numbers that @value{GDBN} knows cease
+to correspond properly with the code.
-@item output/@var{fmt} @var{expression}
-Print the value of @var{expression} in format @var{fmt}. You can use
-the same formats as for @code{print}. @xref{Output Formats,,Output
-formats}, for more information.
+@c The following dropped because Epoch is nonstandard. Reactivate
+@c if/when v19 does something similar. ---doc@cygnus.com 19dec1990
+@ignore
+@kindex Emacs Epoch environment
+@kindex Epoch
+@kindex inspect
-@kindex printf
-@item printf @var{string}, @var{expressions}@dots{}
-Print the values of the @var{expressions} under the control of
-@var{string}. The @var{expressions} are separated by commas and may be
-either numbers or pointers. Their values are printed as specified by
-@var{string}, exactly as if your program were to execute the C
-subroutine
-@c FIXME: the above implies that at least all ANSI C formats are
-@c supported, but it isn't true: %E and %G don't work (or so it seems).
-@c Either this is a bug, or the manual should document what formats are
-@c supported.
+Version 18 of @sc{gnu} Emacs has a built-in window system
+called the @code{epoch}
+environment. Users of this environment can use a new command,
+@code{inspect} which performs identically to @code{print} except that
+each value is printed in its own window.
+@end ignore
-@example
-printf (@var{string}, @var{expressions}@dots{});
-@end example
+@include annotate.texi
+@include gdbmi.texinfo
-For example, you can print two values in hex like this:
+@node GDB Bugs
+@chapter Reporting Bugs in @value{GDBN}
+@cindex bugs in @value{GDBN}
+@cindex reporting bugs in @value{GDBN}
-@smallexample
-printf "foo, bar-foo = 0x%x, 0x%x\n", foo, bar-foo
-@end smallexample
+Your bug reports play an essential role in making @value{GDBN} reliable.
-The only backslash-escape sequences that you can use in the format
-string are the simple ones that consist of backslash followed by a
-letter.
-@end table
+Reporting a bug may help you by bringing a solution to your problem, or it
+may not. But in any case the principal function of a bug report is to help
+the entire community by making the next version of @value{GDBN} work better. Bug
+reports are your contribution to the maintenance of @value{GDBN}.
-@node TUI
-@chapter @value{GDBN} Text User Interface
-@cindex TUI
+In order for a bug report to serve its purpose, you must include the
+information that enables us to fix the bug.
@menu
-* TUI Overview:: TUI overview
-* TUI Keys:: TUI key bindings
-* TUI Commands:: TUI specific commands
-* TUI Configuration:: TUI configuration variables
+* Bug Criteria:: Have you found a bug?
+* Bug Reporting:: How to report bugs
@end menu
-The @value{GDBN} Text User Interface, TUI in short,
-is a terminal interface which uses the @code{curses} library
-to show the source file, the assembly output, the program registers
-and @value{GDBN} commands in separate text windows.
-The TUI is available only when @value{GDBN} is configured
-with the @code{--enable-tui} configure option (@pxref{Configure Options}).
-
-@node TUI Overview
-@section TUI overview
+@node Bug Criteria
+@section Have you found a bug?
+@cindex bug criteria
-The TUI has two display modes that can be switched while
-@value{GDBN} runs:
+If you are not sure whether you have found a bug, here are some guidelines:
@itemize @bullet
+@cindex fatal signal
+@cindex debugger crash
+@cindex crash of debugger
@item
-A curses (or TUI) mode in which it displays several text
-windows on the terminal.
+If the debugger gets a fatal signal, for any input whatever, that is a
+@value{GDBN} bug. Reliable debuggers never crash.
+
+@cindex error on valid input
+@item
+If @value{GDBN} produces an error message for valid input, that is a
+bug. (Note that if you're cross debugging, the problem may also be
+somewhere in the connection to the target.)
+@cindex invalid input
@item
-A standard mode which corresponds to the @value{GDBN} configured without
-the TUI.
+If @value{GDBN} does not produce an error message for invalid input,
+that is a bug. However, you should note that your idea of
+``invalid input'' might be our idea of ``an extension'' or ``support
+for traditional practice''.
+
+@item
+If you are an experienced user of debugging tools, your suggestions
+for improvement of @value{GDBN} are welcome in any case.
@end itemize
-In the TUI mode, @value{GDBN} can display several text window
-on the terminal:
+@node Bug Reporting
+@section How to report bugs
+@cindex bug reports
+@cindex @value{GDBN} bugs, reporting
+
+A number of companies and individuals offer support for @sc{gnu} products.
+If you obtained @value{GDBN} from a support organization, we recommend you
+contact that organization first.
+
+You can find contact information for many support companies and
+individuals in the file @file{etc/SERVICE} in the @sc{gnu} Emacs
+distribution.
+@c should add a web page ref...
+
+In any event, we also recommend that you send bug reports for
+@value{GDBN} to this addresses:
+
+@example
+bug-gdb@@gnu.org
+@end example
+
+@strong{Do not send bug reports to @samp{info-gdb}, or to
+@samp{help-gdb}, or to any newsgroups.} Most users of @value{GDBN} do
+not want to receive bug reports. Those that do have arranged to receive
+@samp{bug-gdb}.
+
+The mailing list @samp{bug-gdb} has a newsgroup @samp{gnu.gdb.bug} which
+serves as a repeater. The mailing list and the newsgroup carry exactly
+the same messages. Often people think of posting bug reports to the
+newsgroup instead of mailing them. This appears to work, but it has one
+problem which can be crucial: a newsgroup posting often lacks a mail
+path back to the sender. Thus, if we need to ask for more information,
+we may be unable to reach you. For this reason, it is better to send
+bug reports to the mailing list.
-@table @emph
-@item command
-This window is the @value{GDBN} command window with the @value{GDBN}
-prompt and the @value{GDBN} outputs. The @value{GDBN} input is still
-managed using readline but through the TUI. The @emph{command}
-window is always visible.
+As a last resort, send bug reports on paper to:
-@item source
-The source window shows the source file of the program. The current
-line as well as active breakpoints are displayed in this window.
-The current program position is shown with the @samp{>} marker and
-active breakpoints are shown with @samp{*} markers.
+@example
+@sc{gnu} Debugger Bugs
+Free Software Foundation Inc.
+59 Temple Place - Suite 330
+Boston, MA 02111-1307
+USA
+@end example
-@item assembly
-The assembly window shows the disassembly output of the program.
+The fundamental principle of reporting bugs usefully is this:
+@strong{report all the facts}. If you are not sure whether to state a
+fact or leave it out, state it!
-@item register
-This window shows the processor registers. It detects when
-a register is changed and when this is the case, registers that have
-changed are highlighted.
+Often people omit facts because they think they know what causes the
+problem and assume that some details do not matter. Thus, you might
+assume that the name of the variable you use in an example does not matter.
+Well, probably it does not, but one cannot be sure. Perhaps the bug is a
+stray memory reference which happens to fetch from the location where that
+name is stored in memory; perhaps, if the name were different, the contents
+of that location would fool the debugger into doing the right thing despite
+the bug. Play it safe and give a specific, complete example. That is the
+easiest thing for you to do, and the most helpful.
-@end table
+Keep in mind that the purpose of a bug report is to enable us to fix the
+bug. It may be that the bug has been reported previously, but neither
+you nor we can know that unless your bug report is complete and
+self-contained.
-The source, assembly and register windows are attached to the thread
-and the frame position. They are updated when the current thread
-changes, when the frame changes or when the program counter changes.
-These three windows are arranged by the TUI according to several
-layouts. The layout defines which of these three windows are visible.
-The following layouts are available:
+Sometimes people give a few sketchy facts and ask, ``Does this ring a
+bell?'' Those bug reports are useless, and we urge everyone to
+@emph{refuse to respond to them} except to chide the sender to report
+bugs properly.
+
+To enable us to fix the bug, you should include all these things:
@itemize @bullet
@item
-source
+The version of @value{GDBN}. @value{GDBN} announces it if you start
+with no arguments; you can also print it at any time using @code{show
+version}.
-@item
-assembly
+Without this, we will not know whether there is any point in looking for
+the bug in the current version of @value{GDBN}.
@item
-source and assembly
+The type of machine you are using, and the operating system name and
+version number.
@item
-source and registers
+What compiler (and its version) was used to compile @value{GDBN}---e.g.
+``@value{GCC}--2.8.1''.
@item
-assembly and registers
-
-@end itemize
-
-@node TUI Keys
-@section TUI Key Bindings
-@cindex TUI key bindings
+What compiler (and its version) was used to compile the program you are
+debugging---e.g. ``@value{GCC}--2.8.1'', or ``HP92453-01 A.10.32.03 HP
+C Compiler''. For GCC, you can say @code{gcc --version} to get this
+information; for other compilers, see the documentation for those
+compilers.
-The TUI installs several key bindings in the readline keymaps
-(@pxref{Command Line Editing}).
-They allow to leave or enter in the TUI mode or they operate
-directly on the TUI layout and windows. The following key bindings
-are installed for both TUI mode and the @value{GDBN} standard mode.
+@item
+The command arguments you gave the compiler to compile your example and
+observe the bug. For example, did you use @samp{-O}? To guarantee
+you will not omit something important, list them all. A copy of the
+Makefile (or the output from make) is sufficient.
-@table @kbd
-@kindex C-x C-a
-@item C-x C-a
-@kindex C-x a
-@itemx C-x a
-@kindex C-x A
-@itemx C-x A
-Enter or leave the TUI mode. When the TUI mode is left,
-the curses window management is left and @value{GDBN} operates using
-its standard mode writing on the terminal directly. When the TUI
-mode is entered, the control is given back to the curses windows.
-The screen is then refreshed.
+If we were to try to guess the arguments, we would probably guess wrong
+and then we might not encounter the bug.
-@kindex C-x 1
-@item C-x 1
-Use a TUI layout with only one window. The layout will
-either be @samp{source} or @samp{assembly}. When the TUI mode
-is not active, it will switch to the TUI mode.
+@item
+A complete input script, and all necessary source files, that will
+reproduce the bug.
-Think of this key binding as the Emacs @kbd{C-x 1} binding.
+@item
+A description of what behavior you observe that you believe is
+incorrect. For example, ``It gets a fatal signal.''
-@kindex C-x 2
-@item C-x 2
-Use a TUI layout with at least two windows. When the current
-layout shows already two windows, a next layout with two windows is used.
-When a new layout is chosen, one window will always be common to the
-previous layout and the new one.
+Of course, if the bug is that @value{GDBN} gets a fatal signal, then we
+will certainly notice it. But if the bug is incorrect output, we might
+not notice unless it is glaringly wrong. You might as well not give us
+a chance to make a mistake.
-Think of it as the Emacs @kbd{C-x 2} binding.
+Even if the problem you experience is a fatal signal, you should still
+say so explicitly. Suppose something strange is going on, such as, your
+copy of @value{GDBN} is out of synch, or you have encountered a bug in
+the C library on your system. (This has happened!) Your copy might
+crash and ours would not. If you told us to expect a crash, then when
+ours fails to crash, we would know that the bug was not happening for
+us. If you had not told us to expect a crash, then we would not be able
+to draw any conclusion from our observations.
-@end table
+@item
+If you wish to suggest changes to the @value{GDBN} source, send us context
+diffs. If you even discuss something in the @value{GDBN} source, refer to
+it by context, not by line number.
-The following key bindings are handled only by the TUI mode:
+The line numbers in our development sources will not match those in your
+sources. Your line numbers would convey no useful information to us.
-@table @key
-@kindex PgUp
-@item PgUp
-Scroll the active window one page up.
+@end itemize
-@kindex PgDn
-@item PgDn
-Scroll the active window one page down.
+Here are some things that are not necessary:
-@kindex Up
-@item Up
-Scroll the active window one line up.
+@itemize @bullet
+@item
+A description of the envelope of the bug.
-@kindex Down
-@item Down
-Scroll the active window one line down.
+Often people who encounter a bug spend a lot of time investigating
+which changes to the input file will make the bug go away and which
+changes will not affect it.
-@kindex Left
-@item Left
-Scroll the active window one column left.
+This is often time consuming and not very useful, because the way we
+will find the bug is by running a single example under the debugger
+with breakpoints, not by pure deduction from a series of examples.
+We recommend that you save your time for something else.
-@kindex Right
-@item Right
-Scroll the active window one column right.
+Of course, if you can find a simpler example to report @emph{instead}
+of the original one, that is a convenience for us. Errors in the
+output will be easier to spot, running under the debugger will take
+less time, and so on.
-@kindex C-L
-@item C-L
-Refresh the screen.
+However, simplification is not vital; if you do not want to do this,
+report the bug anyway and send us the entire test case you used.
-@end table
+@item
+A patch for the bug.
-In the TUI mode, the arrow keys are used by the active window
-for scrolling. This means they are not available for readline. It is
-necessary to use other readline key bindings such as @key{C-p}, @key{C-n},
-@key{C-b} and @key{C-f}.
+A patch for the bug does help us if it is a good one. But do not omit
+the necessary information, such as the test case, on the assumption that
+a patch is all we need. We might see problems with your patch and decide
+to fix the problem another way, or we might not understand it at all.
-@node TUI Commands
-@section TUI specific commands
-@cindex TUI commands
+Sometimes with a program as complicated as @value{GDBN} it is very hard to
+construct an example that will make the program follow a certain path
+through the code. If you do not send us the example, we will not be able
+to construct one, so we will not be able to verify that the bug is fixed.
-The TUI has specific commands to control the text windows.
-These commands are always available, that is they do not depend on
-the current terminal mode in which @value{GDBN} runs. When @value{GDBN}
-is in the standard mode, using these commands will automatically switch
-in the TUI mode.
+And if we cannot understand what bug you are trying to fix, or why your
+patch should be an improvement, we will not install it. A test case will
+help us to understand.
-@table @code
-@item layout next
-@kindex layout next
-Display the next layout.
+@item
+A guess about what the bug is or what it depends on.
-@item layout prev
-@kindex layout prev
-Display the previous layout.
+Such guesses are usually wrong. Even we cannot guess right about such
+things without first using the debugger to find the facts.
+@end itemize
-@item layout src
-@kindex layout src
-Display the source window only.
+@c The readline documentation is distributed with the readline code
+@c and consists of the two following files:
+@c rluser.texinfo
+@c inc-hist.texinfo
+@c Use -I with makeinfo to point to the appropriate directory,
+@c environment var TEXINPUTS with TeX.
+@include rluser.texinfo
+@include inc-hist.texinfo
-@item layout asm
-@kindex layout asm
-Display the assembly window only.
-@item layout split
-@kindex layout split
-Display the source and assembly window.
+@node Formatting Documentation
+@appendix Formatting Documentation
-@item layout regs
-@kindex layout regs
-Display the register window together with the source or assembly window.
+@cindex @value{GDBN} reference card
+@cindex reference card
+The @value{GDBN} 4 release includes an already-formatted reference card, ready
+for printing with PostScript or Ghostscript, in the @file{gdb}
+subdirectory of the main source directory@footnote{In
+@file{gdb-@value{GDBVN}/gdb/refcard.ps} of the version @value{GDBVN}
+release.}. If you can use PostScript or Ghostscript with your printer,
+you can print the reference card immediately with @file{refcard.ps}.
-@item focus next | prev | src | asm | regs | split
-@kindex focus
-Set the focus to the named window.
-This command allows to change the active window so that scrolling keys
-can be affected to another window.
+The release also includes the source for the reference card. You
+can format it, using @TeX{}, by typing:
-@item refresh
-@kindex refresh
-Refresh the screen. This is similar to using @key{C-L} key.
+@example
+make refcard.dvi
+@end example
-@item update
-@kindex update
-Update the source window and the current execution point.
+The @value{GDBN} reference card is designed to print in @dfn{landscape}
+mode on US ``letter'' size paper;
+that is, on a sheet 11 inches wide by 8.5 inches
+high. You will need to specify this form of printing as an option to
+your @sc{dvi} output program.
-@item winheight @var{name} +@var{count}
-@itemx winheight @var{name} -@var{count}
-@kindex winheight
-Change the height of the window @var{name} by @var{count}
-lines. Positive counts increase the height, while negative counts
-decrease it.
+@cindex documentation
-@end table
+All the documentation for @value{GDBN} comes as part of the machine-readable
+distribution. The documentation is written in Texinfo format, which is
+a documentation system that uses a single source file to produce both
+on-line information and a printed manual. You can use one of the Info
+formatting commands to create the on-line version of the documentation
+and @TeX{} (or @code{texi2roff}) to typeset the printed version.
-@node TUI Configuration
-@section TUI configuration variables
-@cindex TUI configuration variables
+@value{GDBN} includes an already formatted copy of the on-line Info
+version of this manual in the @file{gdb} subdirectory. The main Info
+file is @file{gdb-@value{GDBVN}/gdb/gdb.info}, and it refers to
+subordinate files matching @samp{gdb.info*} in the same directory. If
+necessary, you can print out these files, or read them with any editor;
+but they are easier to read using the @code{info} subsystem in @sc{gnu}
+Emacs or the standalone @code{info} program, available as part of the
+@sc{gnu} Texinfo distribution.
-The TUI has several configuration variables that control the
-appearance of windows on the terminal.
+If you want to format these Info files yourself, you need one of the
+Info formatting programs, such as @code{texinfo-format-buffer} or
+@code{makeinfo}.
-@table @code
-@item set tui border-kind @var{kind}
-@kindex set tui border-kind
-Select the border appearance for the source, assembly and register windows.
-The possible values are the following:
-@table @code
-@item space
-Use a space character to draw the border.
+If you have @code{makeinfo} installed, and are in the top level
+@value{GDBN} source directory (@file{gdb-@value{GDBVN}}, in the case of
+version @value{GDBVN}), you can make the Info file by typing:
-@item ascii
-Use ascii characters + - and | to draw the border.
+@example
+cd gdb
+make gdb.info
+@end example
-@item acs
-Use the Alternate Character Set to draw the border. The border is
-drawn using character line graphics if the terminal supports them.
+If you want to typeset and print copies of this manual, you need @TeX{},
+a program to print its @sc{dvi} output files, and @file{texinfo.tex}, the
+Texinfo definitions file.
-@end table
+@TeX{} is a typesetting program; it does not print files directly, but
+produces output files called @sc{dvi} files. To print a typeset
+document, you need a program to print @sc{dvi} files. If your system
+has @TeX{} installed, chances are it has such a program. The precise
+command to use depends on your system; @kbd{lpr -d} is common; another
+(for PostScript devices) is @kbd{dvips}. The @sc{dvi} print command may
+require a file name without any extension or a @samp{.dvi} extension.
-@item set tui active-border-mode @var{mode}
-@kindex set tui active-border-mode
-Select the attributes to display the border of the active window.
-The possible values are @code{normal}, @code{standout}, @code{reverse},
-@code{half}, @code{half-standout}, @code{bold} and @code{bold-standout}.
+@TeX{} also requires a macro definitions file called
+@file{texinfo.tex}. This file tells @TeX{} how to typeset a document
+written in Texinfo format. On its own, @TeX{} cannot either read or
+typeset a Texinfo file. @file{texinfo.tex} is distributed with GDB
+and is located in the @file{gdb-@var{version-number}/texinfo}
+directory.
-@item set tui border-mode @var{mode}
-@kindex set tui border-mode
-Select the attributes to display the border of other windows.
-The @var{mode} can be one of the following:
-@table @code
-@item normal
-Use normal attributes to display the border.
+If you have @TeX{} and a @sc{dvi} printer program installed, you can
+typeset and print this manual. First switch to the the @file{gdb}
+subdirectory of the main source directory (for example, to
+@file{gdb-@value{GDBVN}/gdb}) and type:
-@item standout
-Use standout mode.
+@example
+make gdb.dvi
+@end example
-@item reverse
-Use reverse video mode.
+Then give @file{gdb.dvi} to your @sc{dvi} printing program.
-@item half
-Use half bright mode.
+@node Installing GDB
+@appendix Installing @value{GDBN}
+@cindex configuring @value{GDBN}
+@cindex installation
-@item half-standout
-Use half bright and standout mode.
+@value{GDBN} comes with a @code{configure} script that automates the process
+of preparing @value{GDBN} for installation; you can then use @code{make} to
+build the @code{gdb} program.
+@iftex
+@c irrelevant in info file; it's as current as the code it lives with.
+@footnote{If you have a more recent version of @value{GDBN} than @value{GDBVN},
+look at the @file{README} file in the sources; we may have improved the
+installation procedures since publishing this manual.}
+@end iftex
-@item bold
-Use extra bright or bold mode.
+The @value{GDBN} distribution includes all the source code you need for
+@value{GDBN} in a single directory, whose name is usually composed by
+appending the version number to @samp{gdb}.
-@item bold-standout
-Use extra bright or bold and standout mode.
+For example, the @value{GDBN} version @value{GDBVN} distribution is in the
+@file{gdb-@value{GDBVN}} directory. That directory contains:
-@end table
+@table @code
+@item gdb-@value{GDBVN}/configure @r{(and supporting files)}
+script for configuring @value{GDBN} and all its supporting libraries
-@end table
+@item gdb-@value{GDBVN}/gdb
+the source specific to @value{GDBN} itself
-@node Emacs
-@chapter Using @value{GDBN} under @sc{gnu} Emacs
+@item gdb-@value{GDBVN}/bfd
+source for the Binary File Descriptor library
-@cindex Emacs
-@cindex @sc{gnu} Emacs
-A special interface allows you to use @sc{gnu} Emacs to view (and
-edit) the source files for the program you are debugging with
-@value{GDBN}.
+@item gdb-@value{GDBVN}/include
+@sc{gnu} include files
-To use this interface, use the command @kbd{M-x gdb} in Emacs. Give the
-executable file you want to debug as an argument. This command starts
-@value{GDBN} as a subprocess of Emacs, with input and output through a newly
-created Emacs buffer.
-@c (Do not use the @code{-tui} option to run @value{GDBN} from Emacs.)
+@item gdb-@value{GDBVN}/libiberty
+source for the @samp{-liberty} free software library
-Using @value{GDBN} under Emacs is just like using @value{GDBN} normally except for two
-things:
+@item gdb-@value{GDBVN}/opcodes
+source for the library of opcode tables and disassemblers
-@itemize @bullet
-@item
-All ``terminal'' input and output goes through the Emacs buffer.
-@end itemize
+@item gdb-@value{GDBVN}/readline
+source for the @sc{gnu} command-line interface
-This applies both to @value{GDBN} commands and their output, and to the input
-and output done by the program you are debugging.
+@item gdb-@value{GDBVN}/glob
+source for the @sc{gnu} filename pattern-matching subroutine
-This is useful because it means that you can copy the text of previous
-commands and input them again; you can even use parts of the output
-in this way.
+@item gdb-@value{GDBVN}/mmalloc
+source for the @sc{gnu} memory-mapped malloc package
+@end table
-All the facilities of Emacs' Shell mode are available for interacting
-with your program. In particular, you can send signals the usual
-way---for example, @kbd{C-c C-c} for an interrupt, @kbd{C-c C-z} for a
-stop.
+The simplest way to configure and build @value{GDBN} is to run @code{configure}
+from the @file{gdb-@var{version-number}} source directory, which in
+this example is the @file{gdb-@value{GDBVN}} directory.
-@itemize @bullet
-@item
-@value{GDBN} displays source code through Emacs.
-@end itemize
+First switch to the @file{gdb-@var{version-number}} source directory
+if you are not already in it; then run @code{configure}. Pass the
+identifier for the platform on which @value{GDBN} will run as an
+argument.
-Each time @value{GDBN} displays a stack frame, Emacs automatically finds the
-source file for that frame and puts an arrow (@samp{=>}) at the
-left margin of the current line. Emacs uses a separate buffer for
-source display, and splits the screen to show both your @value{GDBN} session
-and the source.
+For example:
-Explicit @value{GDBN} @code{list} or search commands still produce output as
-usual, but you probably have no reason to use them from Emacs.
+@example
+cd gdb-@value{GDBVN}
+./configure @var{host}
+make
+@end example
-@quotation
-@emph{Warning:} If the directory where your program resides is not your
-current directory, it can be easy to confuse Emacs about the location of
-the source files, in which case the auxiliary display buffer does not
-appear to show your source. @value{GDBN} can find programs by searching your
-environment's @code{PATH} variable, so the @value{GDBN} input and output
-session proceeds normally; but Emacs does not get enough information
-back from @value{GDBN} to locate the source files in this situation. To
-avoid this problem, either start @value{GDBN} mode from the directory where
-your program resides, or specify an absolute file name when prompted for the
-@kbd{M-x gdb} argument.
+@noindent
+where @var{host} is an identifier such as @samp{sun4} or
+@samp{decstation}, that identifies the platform where @value{GDBN} will run.
+(You can often leave off @var{host}; @code{configure} tries to guess the
+correct value by examining your system.)
-A similar confusion can result if you use the @value{GDBN} @code{file} command to
-switch to debugging a program in some other location, from an existing
-@value{GDBN} buffer in Emacs.
-@end quotation
+Running @samp{configure @var{host}} and then running @code{make} builds the
+@file{bfd}, @file{readline}, @file{mmalloc}, and @file{libiberty}
+libraries, then @code{gdb} itself. The configured source files, and the
+binaries, are left in the corresponding source directories.
-By default, @kbd{M-x gdb} calls the program called @file{gdb}. If
-you need to call @value{GDBN} by a different name (for example, if you keep
-several configurations around, with different names) you can set the
-Emacs variable @code{gdb-command-name}; for example,
+@need 750
+@code{configure} is a Bourne-shell (@code{/bin/sh}) script; if your
+system does not recognize this automatically when you run a different
+shell, you may need to run @code{sh} on it explicitly:
@example
-(setq gdb-command-name "mygdb")
+sh configure @var{host}
@end example
-@noindent
-(preceded by @kbd{M-:} or @kbd{ESC :}, or typed in the @code{*scratch*} buffer, or
-in your @file{.emacs} file) makes Emacs call the program named
-``@code{mygdb}'' instead.
+If you run @code{configure} from a directory that contains source
+directories for multiple libraries or programs, such as the
+@file{gdb-@value{GDBVN}} source directory for version @value{GDBVN}, @code{configure}
+creates configuration files for every directory level underneath (unless
+you tell it not to, with the @samp{--norecursion} option).
+
+You can run the @code{configure} script from any of the
+subordinate directories in the @value{GDBN} distribution if you only want to
+configure that subdirectory, but be sure to specify a path to it.
-In the @value{GDBN} I/O buffer, you can use these special Emacs commands in
-addition to the standard Shell mode commands:
+For example, with version @value{GDBVN}, type the following to configure only
+the @code{bfd} subdirectory:
-@table @kbd
-@item C-h m
-Describe the features of Emacs' @value{GDBN} Mode.
+@example
+@group
+cd gdb-@value{GDBVN}/bfd
+../configure @var{host}
+@end group
+@end example
-@item M-s
-Execute to another source line, like the @value{GDBN} @code{step} command; also
-update the display window to show the current file and location.
+You can install @code{@value{GDBP}} anywhere; it has no hardwired paths.
+However, you should make sure that the shell on your path (named by
+the @samp{SHELL} environment variable) is publicly readable. Remember
+that @value{GDBN} uses the shell to start your program---some systems refuse to
+let @value{GDBN} debug child processes whose programs are not readable.
-@item M-n
-Execute to next source line in this function, skipping all function
-calls, like the @value{GDBN} @code{next} command. Then update the display window
-to show the current file and location.
+@menu
+* Separate Objdir:: Compiling @value{GDBN} in another directory
+* Config Names:: Specifying names for hosts and targets
+* Configure Options:: Summary of options for configure
+@end menu
-@item M-i
-Execute one instruction, like the @value{GDBN} @code{stepi} command; update
-display window accordingly.
+@node Separate Objdir
+@section Compiling @value{GDBN} in another directory
-@item M-x gdb-nexti
-Execute to next instruction, using the @value{GDBN} @code{nexti} command; update
-display window accordingly.
+If you want to run @value{GDBN} versions for several host or target machines,
+you need a different @code{gdb} compiled for each combination of
+host and target. @code{configure} is designed to make this easy by
+allowing you to generate each configuration in a separate subdirectory,
+rather than in the source directory. If your @code{make} program
+handles the @samp{VPATH} feature (@sc{gnu} @code{make} does), running
+@code{make} in each of these directories builds the @code{gdb}
+program specified there.
-@item C-c C-f
-Execute until exit from the selected stack frame, like the @value{GDBN}
-@code{finish} command.
+To build @code{gdb} in a separate directory, run @code{configure}
+with the @samp{--srcdir} option to specify where to find the source.
+(You also need to specify a path to find @code{configure}
+itself from your working directory. If the path to @code{configure}
+would be the same as the argument to @samp{--srcdir}, you can leave out
+the @samp{--srcdir} option; it is assumed.)
-@item M-c
-Continue execution of your program, like the @value{GDBN} @code{continue}
-command.
+For example, with version @value{GDBVN}, you can build @value{GDBN} in a
+separate directory for a Sun 4 like this:
-@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-p}.
+@example
+@group
+cd gdb-@value{GDBVN}
+mkdir ../gdb-sun4
+cd ../gdb-sun4
+../gdb-@value{GDBVN}/configure sun4
+make
+@end group
+@end example
-@item M-u
-Go up the number of frames indicated by the numeric argument
-(@pxref{Arguments, , Numeric Arguments, Emacs, The @sc{gnu} Emacs Manual}),
-like the @value{GDBN} @code{up} command.
+When @code{configure} builds a configuration using a remote source
+directory, it creates a tree for the binaries with the same structure
+(and using the same names) as the tree under the source directory. In
+the example, you'd find the Sun 4 library @file{libiberty.a} in the
+directory @file{gdb-sun4/libiberty}, and @value{GDBN} itself in
+@file{gdb-sun4/gdb}.
-@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-u}.
+One popular reason to build several @value{GDBN} configurations in separate
+directories is to configure @value{GDBN} for cross-compiling (where
+@value{GDBN} runs on one machine---the @dfn{host}---while debugging
+programs that run on another machine---the @dfn{target}).
+You specify a cross-debugging target by
+giving the @samp{--target=@var{target}} option to @code{configure}.
-@item M-d
-Go down the number of frames indicated by the numeric argument, like the
-@value{GDBN} @code{down} command.
+When you run @code{make} to build a program or library, you must run
+it in a configured directory---whatever directory you were in when you
+called @code{configure} (or one of its subdirectories).
-@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-d}.
+The @code{Makefile} that @code{configure} generates in each source
+directory also runs recursively. If you type @code{make} in a source
+directory such as @file{gdb-@value{GDBVN}} (or in a separate configured
+directory configured with @samp{--srcdir=@var{dirname}/gdb-@value{GDBVN}}), you
+will build all the required libraries, and then build GDB.
-@item C-x &
-Read the number where the cursor is positioned, and insert it at the end
-of the @value{GDBN} I/O buffer. For example, if you wish to disassemble code
-around an address that was displayed earlier, type @kbd{disassemble};
-then move the cursor to the address display, and pick up the
-argument for @code{disassemble} by typing @kbd{C-x &}.
+When you have multiple hosts or targets configured in separate
+directories, you can run @code{make} on them in parallel (for example,
+if they are NFS-mounted on each of the hosts); they will not interfere
+with each other.
-You can customize this further by defining elements of the list
-@code{gdb-print-command}; once it is defined, you can format or
-otherwise process numbers picked up by @kbd{C-x &} before they are
-inserted. A numeric argument to @kbd{C-x &} indicates that you
-wish special formatting, and also acts as an index to pick an element of the
-list. If the list element is a string, the number to be inserted is
-formatted using the Emacs function @code{format}; otherwise the number
-is passed as an argument to the corresponding list element.
-@end table
+@node Config Names
+@section Specifying names for hosts and targets
-In any source file, the Emacs command @kbd{C-x SPC} (@code{gdb-break})
-tells @value{GDBN} to set a breakpoint on the source line point is on.
+The specifications used for hosts and targets in the @code{configure}
+script are based on a three-part naming scheme, but some short predefined
+aliases are also supported. The full naming scheme encodes three pieces
+of information in the following pattern:
-If you accidentally delete the source-display buffer, an easy way to get
-it back is to type the command @code{f} in the @value{GDBN} buffer, to
-request a frame display; when you run under Emacs, this recreates
-the source buffer if necessary to show you the context of the current
-frame.
+@example
+@var{architecture}-@var{vendor}-@var{os}
+@end example
-The source files displayed in Emacs are in ordinary Emacs buffers
-which are visiting the source files in the usual way. You can edit
-the files with these buffers if you wish; but keep in mind that @value{GDBN}
-communicates with Emacs in terms of line numbers. If you add or
-delete lines from the text, the line numbers that @value{GDBN} knows cease
-to correspond properly with the code.
+For example, you can use the alias @code{sun4} as a @var{host} argument,
+or as the value for @var{target} in a @code{--target=@var{target}}
+option. The equivalent full name is @samp{sparc-sun-sunos4}.
-@c The following dropped because Epoch is nonstandard. Reactivate
-@c if/when v19 does something similar. ---doc@cygnus.com 19dec1990
-@ignore
-@kindex Emacs Epoch environment
-@kindex Epoch
-@kindex inspect
+The @code{configure} script accompanying @value{GDBN} does not provide
+any query facility to list all supported host and target names or
+aliases. @code{configure} calls the Bourne shell script
+@code{config.sub} to map abbreviations to full names; you can read the
+script, if you wish, or you can use it to test your guesses on
+abbreviations---for example:
-Version 18 of @sc{gnu} Emacs has a built-in window system
-called the @code{epoch}
-environment. Users of this environment can use a new command,
-@code{inspect} which performs identically to @code{print} except that
-each value is printed in its own window.
-@end ignore
+@smallexample
+% sh config.sub i386-linux
+i386-pc-linux-gnu
+% sh config.sub alpha-linux
+alpha-unknown-linux-gnu
+% sh config.sub hp9k700
+hppa1.1-hp-hpux
+% sh config.sub sun4
+sparc-sun-sunos4.1.1
+% sh config.sub sun3
+m68k-sun-sunos4.1.1
+% sh config.sub i986v
+Invalid configuration `i986v': machine `i986v' not recognized
+@end smallexample
-@include annotate.texi
-@include gdbmi.texinfo
+@noindent
+@code{config.sub} is also distributed in the @value{GDBN} source
+directory (@file{gdb-@value{GDBVN}}, for version @value{GDBVN}).
-@node GDB Bugs
-@chapter Reporting Bugs in @value{GDBN}
-@cindex bugs in @value{GDBN}
-@cindex reporting bugs in @value{GDBN}
+@node Configure Options
+@section @code{configure} options
-Your bug reports play an essential role in making @value{GDBN} reliable.
+Here is a summary of the @code{configure} options and arguments that
+are most often useful for building @value{GDBN}. @code{configure} also has
+several other options not listed here. @inforef{What Configure
+Does,,configure.info}, for a full explanation of @code{configure}.
-Reporting a bug may help you by bringing a solution to your problem, or it
-may not. But in any case the principal function of a bug report is to help
-the entire community by making the next version of @value{GDBN} work better. Bug
-reports are your contribution to the maintenance of @value{GDBN}.
+@example
+configure @r{[}--help@r{]}
+ @r{[}--prefix=@var{dir}@r{]}
+ @r{[}--exec-prefix=@var{dir}@r{]}
+ @r{[}--srcdir=@var{dirname}@r{]}
+ @r{[}--norecursion@r{]} @r{[}--rm@r{]}
+ @r{[}--target=@var{target}@r{]}
+ @var{host}
+@end example
-In order for a bug report to serve its purpose, you must include the
-information that enables us to fix the bug.
+@noindent
+You may introduce options with a single @samp{-} rather than
+@samp{--} if you prefer; but you may abbreviate option names if you use
+@samp{--}.
-@menu
-* Bug Criteria:: Have you found a bug?
-* Bug Reporting:: How to report bugs
-@end menu
+@table @code
+@item --help
+Display a quick summary of how to invoke @code{configure}.
-@node Bug Criteria
-@section Have you found a bug?
-@cindex bug criteria
+@item --prefix=@var{dir}
+Configure the source to install programs and files under directory
+@file{@var{dir}}.
-If you are not sure whether you have found a bug, here are some guidelines:
+@item --exec-prefix=@var{dir}
+Configure the source to install programs under directory
+@file{@var{dir}}.
-@itemize @bullet
-@cindex fatal signal
-@cindex debugger crash
-@cindex crash of debugger
-@item
-If the debugger gets a fatal signal, for any input whatever, that is a
-@value{GDBN} bug. Reliable debuggers never crash.
+@c avoid splitting the warning from the explanation:
+@need 2000
+@item --srcdir=@var{dirname}
+@strong{Warning: using this option requires @sc{gnu} @code{make}, or another
+@code{make} that implements the @code{VPATH} feature.}@*
+Use this option to make configurations in directories separate from the
+@value{GDBN} source directories. Among other things, you can use this to
+build (or maintain) several configurations simultaneously, in separate
+directories. @code{configure} writes configuration specific files in
+the current directory, but arranges for them to use the source in the
+directory @var{dirname}. @code{configure} creates directories under
+the working directory in parallel to the source directories below
+@var{dirname}.
-@cindex error on valid input
-@item
-If @value{GDBN} produces an error message for valid input, that is a
-bug. (Note that if you're cross debugging, the problem may also be
-somewhere in the connection to the target.)
+@item --norecursion
+Configure only the directory level where @code{configure} is executed; do not
+propagate configuration to subdirectories.
-@cindex invalid input
-@item
-If @value{GDBN} does not produce an error message for invalid input,
-that is a bug. However, you should note that your idea of
-``invalid input'' might be our idea of ``an extension'' or ``support
-for traditional practice''.
+@item --target=@var{target}
+Configure @value{GDBN} for cross-debugging programs running on the specified
+@var{target}. Without this option, @value{GDBN} is configured to debug
+programs that run on the same machine (@var{host}) as @value{GDBN} itself.
-@item
-If you are an experienced user of debugging tools, your suggestions
-for improvement of @value{GDBN} are welcome in any case.
-@end itemize
+There is no convenient way to generate a list of all available targets.
-@node Bug Reporting
-@section How to report bugs
-@cindex bug reports
-@cindex @value{GDBN} bugs, reporting
+@item @var{host} @dots{}
+Configure @value{GDBN} to run on the specified @var{host}.
-A number of companies and individuals offer support for @sc{gnu} products.
-If you obtained @value{GDBN} from a support organization, we recommend you
-contact that organization first.
+There is no convenient way to generate a list of all available hosts.
+@end table
-You can find contact information for many support companies and
-individuals in the file @file{etc/SERVICE} in the @sc{gnu} Emacs
-distribution.
-@c should add a web page ref...
+There are many other options available as well, but they are generally
+needed for special purposes only.
-In any event, we also recommend that you send bug reports for
-@value{GDBN} to this addresses:
+@node Maintenance Commands
+@appendix Maintenance Commands
+@cindex maintenance commands
+@cindex internal commands
-@example
-bug-gdb@@gnu.org
-@end example
+In addition to commands intended for @value{GDBN} users, @value{GDBN}
+includes a number of commands intended for @value{GDBN} developers.
+These commands are provided here for reference.
-@strong{Do not send bug reports to @samp{info-gdb}, or to
-@samp{help-gdb}, or to any newsgroups.} Most users of @value{GDBN} do
-not want to receive bug reports. Those that do have arranged to receive
-@samp{bug-gdb}.
+@table @code
+@kindex maint info breakpoints
+@item @anchor{maint info breakpoints}maint info breakpoints
+Using the same format as @samp{info breakpoints}, display both the
+breakpoints you've set explicitly, and those @value{GDBN} is using for
+internal purposes. Internal breakpoints are shown with negative
+breakpoint numbers. The type column identifies what kind of breakpoint
+is shown:
-The mailing list @samp{bug-gdb} has a newsgroup @samp{gnu.gdb.bug} which
-serves as a repeater. The mailing list and the newsgroup carry exactly
-the same messages. Often people think of posting bug reports to the
-newsgroup instead of mailing them. This appears to work, but it has one
-problem which can be crucial: a newsgroup posting often lacks a mail
-path back to the sender. Thus, if we need to ask for more information,
-we may be unable to reach you. For this reason, it is better to send
-bug reports to the mailing list.
+@table @code
+@item breakpoint
+Normal, explicitly set breakpoint.
-As a last resort, send bug reports on paper to:
+@item watchpoint
+Normal, explicitly set watchpoint.
-@example
-@sc{gnu} Debugger Bugs
-Free Software Foundation Inc.
-59 Temple Place - Suite 330
-Boston, MA 02111-1307
-USA
-@end example
+@item longjmp
+Internal breakpoint, used to handle correctly stepping through
+@code{longjmp} calls.
-The fundamental principle of reporting bugs usefully is this:
-@strong{report all the facts}. If you are not sure whether to state a
-fact or leave it out, state it!
+@item longjmp resume
+Internal breakpoint at the target of a @code{longjmp}.
-Often people omit facts because they think they know what causes the
-problem and assume that some details do not matter. Thus, you might
-assume that the name of the variable you use in an example does not matter.
-Well, probably it does not, but one cannot be sure. Perhaps the bug is a
-stray memory reference which happens to fetch from the location where that
-name is stored in memory; perhaps, if the name were different, the contents
-of that location would fool the debugger into doing the right thing despite
-the bug. Play it safe and give a specific, complete example. That is the
-easiest thing for you to do, and the most helpful.
+@item until
+Temporary internal breakpoint used by the @value{GDBN} @code{until} command.
-Keep in mind that the purpose of a bug report is to enable us to fix the
-bug. It may be that the bug has been reported previously, but neither
-you nor we can know that unless your bug report is complete and
-self-contained.
+@item finish
+Temporary internal breakpoint used by the @value{GDBN} @code{finish} command.
-Sometimes people give a few sketchy facts and ask, ``Does this ring a
-bell?'' Those bug reports are useless, and we urge everyone to
-@emph{refuse to respond to them} except to chide the sender to report
-bugs properly.
+@item shlib events
+Shared library events.
-To enable us to fix the bug, you should include all these things:
+@end table
-@itemize @bullet
-@item
-The version of @value{GDBN}. @value{GDBN} announces it if you start
-with no arguments; you can also print it at any time using @code{show
-version}.
+@end table
-Without this, we will not know whether there is any point in looking for
-the bug in the current version of @value{GDBN}.
-@item
-The type of machine you are using, and the operating system name and
-version number.
+@node Remove Protocol
+@appendix @value{GDBN} Remote Serial Protocol
-@item
-What compiler (and its version) was used to compile @value{GDBN}---e.g.
-``@value{GCC}--2.8.1''.
+There may be occasions when you need to know something about the
+protocol---for example, if there is only one serial port to your target
+machine, you might want your program to do something special if it
+recognizes a packet meant for @value{GDBN}.
-@item
-What compiler (and its version) was used to compile the program you are
-debugging---e.g. ``@value{GCC}--2.8.1'', or ``HP92453-01 A.10.32.03 HP
-C Compiler''. For GCC, you can say @code{gcc --version} to get this
-information; for other compilers, see the documentation for those
-compilers.
+In the examples below, @samp{<-} and @samp{->} are used to indicate
+transmitted and received data respectfully.
-@item
-The command arguments you gave the compiler to compile your example and
-observe the bug. For example, did you use @samp{-O}? To guarantee
-you will not omit something important, list them all. A copy of the
-Makefile (or the output from make) is sufficient.
+@cindex protocol, @value{GDBN} remote serial
+@cindex serial protocol, @value{GDBN} remote
+@cindex remote serial protocol
+All @value{GDBN} commands and responses (other than acknowledgments) are
+sent as a @var{packet}. A @var{packet} is introduced with the character
+@samp{$}, the actual @var{packet-data}, and the terminating character
+@samp{#} followed by a two-digit @var{checksum}:
-If we were to try to guess the arguments, we would probably guess wrong
-and then we might not encounter the bug.
+@example
+@code{$}@var{packet-data}@code{#}@var{checksum}
+@end example
+@noindent
-@item
-A complete input script, and all necessary source files, that will
-reproduce the bug.
+@cindex checksum, for @value{GDBN} remote
+@noindent
+The two-digit @var{checksum} is computed as the modulo 256 sum of all
+characters between the leading @samp{$} and the trailing @samp{#} (an
+eight bit unsigned checksum).
-@item
-A description of what behavior you observe that you believe is
-incorrect. For example, ``It gets a fatal signal.''
+Implementors should note that prior to @value{GDBN} 5.0 the protocol
+specification also included an optional two-digit @var{sequence-id}:
-Of course, if the bug is that @value{GDBN} gets a fatal signal, then we
-will certainly notice it. But if the bug is incorrect output, we might
-not notice unless it is glaringly wrong. You might as well not give us
-a chance to make a mistake.
+@example
+@code{$}@var{sequence-id}@code{:}@var{packet-data}@code{#}@var{checksum}
+@end example
-Even if the problem you experience is a fatal signal, you should still
-say so explicitly. Suppose something strange is going on, such as, your
-copy of @value{GDBN} is out of synch, or you have encountered a bug in
-the C library on your system. (This has happened!) Your copy might
-crash and ours would not. If you told us to expect a crash, then when
-ours fails to crash, we would know that the bug was not happening for
-us. If you had not told us to expect a crash, then we would not be able
-to draw any conclusion from our observations.
+@cindex sequence-id, for @value{GDBN} remote
+@noindent
+That @var{sequence-id} was appended to the acknowledgment. @value{GDBN}
+has never output @var{sequence-id}s. Stubs that handle packets added
+since @value{GDBN} 5.0 must not accept @var{sequence-id}.
-@item
-If you wish to suggest changes to the @value{GDBN} source, send us context
-diffs. If you even discuss something in the @value{GDBN} source, refer to
-it by context, not by line number.
+@cindex acknowledgment, for @value{GDBN} remote
+When either the host or the target machine receives a packet, the first
+response expected is an acknowledgment: either @samp{+} (to indicate
+the package was received correctly) or @samp{-} (to request
+retransmission):
-The line numbers in our development sources will not match those in your
-sources. Your line numbers would convey no useful information to us.
+@example
+<- @code{$}@var{packet-data}@code{#}@var{checksum}
+-> @code{+}
+@end example
+@noindent
-@end itemize
+The host (@value{GDBN}) sends @var{command}s, and the target (the
+debugging stub incorporated in your program) sends a @var{response}. In
+the case of step and continue @var{command}s, the response is only sent
+when the operation has completed (the target has again stopped).
-Here are some things that are not necessary:
+@var{packet-data} consists of a sequence of characters with the
+exception of @samp{#} and @samp{$} (see @samp{X} packet for additional
+exceptions).
-@itemize @bullet
-@item
-A description of the envelope of the bug.
+Fields within the packet should be separated using @samp{,} @samp{;} or
+@samp{:}. Except where otherwise noted all numbers are represented in
+HEX with leading zeros suppressed.
-Often people who encounter a bug spend a lot of time investigating
-which changes to the input file will make the bug go away and which
-changes will not affect it.
+Implementors should note that prior to @value{GDBN} 5.0, the character
+@samp{:} could not appear as the third character in a packet (as it
+would potentially conflict with the @var{sequence-id}).
-This is often time consuming and not very useful, because the way we
-will find the bug is by running a single example under the debugger
-with breakpoints, not by pure deduction from a series of examples.
-We recommend that you save your time for something else.
+Response @var{data} can be run-length encoded to save space. A @samp{*}
+means that the next character is an @sc{ascii} encoding giving a repeat count
+which stands for that many repetitions of the character preceding the
+@samp{*}. The encoding is @code{n+29}, yielding a printable character
+where @code{n >=3} (which is where rle starts to win). The printable
+characters @samp{$}, @samp{#}, @samp{+} and @samp{-} or with a numeric
+value greater than 126 should not be used.
-Of course, if you can find a simpler example to report @emph{instead}
-of the original one, that is a convenience for us. Errors in the
-output will be easier to spot, running under the debugger will take
-less time, and so on.
+Some remote systems have used a different run-length encoding mechanism
+loosely refered to as the cisco encoding. Following the @samp{*}
+character are two hex digits that indicate the size of the packet.
-However, simplification is not vital; if you do not want to do this,
-report the bug anyway and send us the entire test case you used.
+So:
+@example
+"@code{0* }"
+@end example
+@noindent
+means the same as "0000".
-@item
-A patch for the bug.
+The error response returned for some packets includes a two character
+error number. That number is not well defined.
-A patch for the bug does help us if it is a good one. But do not omit
-the necessary information, such as the test case, on the assumption that
-a patch is all we need. We might see problems with your patch and decide
-to fix the problem another way, or we might not understand it at all.
+For any @var{command} not supported by the stub, an empty response
+(@samp{$#00}) should be returned. That way it is possible to extend the
+protocol. A newer @value{GDBN} can tell if a packet is supported based
+on that response.
-Sometimes with a program as complicated as @value{GDBN} it is very hard to
-construct an example that will make the program follow a certain path
-through the code. If you do not send us the example, we will not be able
-to construct one, so we will not be able to verify that the bug is fixed.
+A stub is required to support the @samp{g}, @samp{G}, @samp{m}, @samp{M},
+@samp{c}, and @samp{s} @var{command}s. All other @var{command}s are
+optional.
-And if we cannot understand what bug you are trying to fix, or why your
-patch should be an improvement, we will not install it. A test case will
-help us to understand.
+Below is a complete list of all currently defined @var{command}s and
+their corresponding response @var{data}:
+@page
+@multitable @columnfractions .30 .30 .40
+@item Packet
+@tab Request
+@tab Description
+@item extended mode
+@tab @code{!}
+@tab
+Enable extended mode. In extended mode, the remote server is made
+persistent. The @samp{R} packet is used to restart the program being
+debugged.
@item
-A guess about what the bug is or what it depends on.
-
-Such guesses are usually wrong. Even we cannot guess right about such
-things without first using the debugger to find the facts.
-@end itemize
+@tab reply @samp{OK}
+@tab
+The remote target both supports and has enabled extended mode.
-@c The readline documentation is distributed with the readline code
-@c and consists of the two following files:
-@c rluser.texinfo
-@c inc-hist.texinfo
-@c Use -I with makeinfo to point to the appropriate directory,
-@c environment var TEXINPUTS with TeX.
-@include rluser.texinfo
-@include inc-hist.texinfo
+@item last signal
+@tab @code{?}
+@tab
+Indicate the reason the target halted. The reply is the same as for step
+and continue.
+@item
+@tab reply
+@tab see below
-@node Formatting Documentation
-@appendix Formatting Documentation
+@item reserved
+@tab @code{a}
+@tab Reserved for future use
-@cindex @value{GDBN} reference card
-@cindex reference card
-The @value{GDBN} 4 release includes an already-formatted reference card, ready
-for printing with PostScript or Ghostscript, in the @file{gdb}
-subdirectory of the main source directory@footnote{In
-@file{gdb-@value{GDBVN}/gdb/refcard.ps} of the version @value{GDBVN}
-release.}. If you can use PostScript or Ghostscript with your printer,
-you can print the reference card immediately with @file{refcard.ps}.
+@item set program arguments @strong{(reserved)}
+@tab @code{A}@var{arglen}@code{,}@var{argnum}@code{,}@var{arg}@code{,...}
+@tab
+@item
+@tab
+@tab
+Initialized @samp{argv[]} array passed into program. @var{arglen}
+specifies the number of bytes in the hex encoded byte stream @var{arg}.
+See @file{gdbserver} for more details.
+@item
+@tab reply @code{OK}
+@item
+@tab reply @code{E}@var{NN}
-The release also includes the source for the reference card. You
-can format it, using @TeX{}, by typing:
+@item set baud @strong{(deprecated)}
+@tab @code{b}@var{baud}
+@tab
+Change the serial line speed to @var{baud}. JTC: @emph{When does the
+transport layer state change? When it's received, or after the ACK is
+transmitted. In either case, there are problems if the command or the
+acknowledgment packet is dropped.} Stan: @emph{If people really wanted
+to add something like this, and get it working for the first time, they
+ought to modify ser-unix.c to send some kind of out-of-band message to a
+specially-setup stub and have the switch happen "in between" packets, so
+that from remote protocol's point of view, nothing actually
+happened.}
-@example
-make refcard.dvi
-@end example
+@item set breakpoint @strong{(deprecated)}
+@tab @code{B}@var{addr},@var{mode}
+@tab
+Set (@var{mode} is @samp{S}) or clear (@var{mode} is @samp{C}) a
+breakpoint at @var{addr}. @emph{This has been replaced by the @samp{Z} and
+@samp{z} packets.}
-The @value{GDBN} reference card is designed to print in @dfn{landscape}
-mode on US ``letter'' size paper;
-that is, on a sheet 11 inches wide by 8.5 inches
-high. You will need to specify this form of printing as an option to
-your @sc{dvi} output program.
+@item continue
+@tab @code{c}@var{addr}
+@tab
+@var{addr} is address to resume. If @var{addr} is omitted, resume at
+current address.
+@item
+@tab reply
+@tab see below
-@cindex documentation
+@item continue with signal
+@tab @code{C}@var{sig}@code{;}@var{addr}
+@tab
+Continue with signal @var{sig} (hex signal number). If
+@code{;}@var{addr} is omitted, resume at same address.
+@item
+@tab reply
+@tab see below
-All the documentation for @value{GDBN} comes as part of the machine-readable
-distribution. The documentation is written in Texinfo format, which is
-a documentation system that uses a single source file to produce both
-on-line information and a printed manual. You can use one of the Info
-formatting commands to create the on-line version of the documentation
-and @TeX{} (or @code{texi2roff}) to typeset the printed version.
+@item toggle debug @strong{(deprecated)}
+@tab @code{d}
+@tab
+toggle debug flag.
-@value{GDBN} includes an already formatted copy of the on-line Info
-version of this manual in the @file{gdb} subdirectory. The main Info
-file is @file{gdb-@value{GDBVN}/gdb/gdb.info}, and it refers to
-subordinate files matching @samp{gdb.info*} in the same directory. If
-necessary, you can print out these files, or read them with any editor;
-but they are easier to read using the @code{info} subsystem in @sc{gnu}
-Emacs or the standalone @code{info} program, available as part of the
-@sc{gnu} Texinfo distribution.
+@item detach
+@tab @code{D}
+@tab
+Detach @value{GDBN} from the remote system. Sent to the remote target before
+@value{GDBN} disconnects.
+@item
+@tab reply @emph{no response}
+@tab
+@value{GDBN} does not check for any response after sending this packet.
-If you want to format these Info files yourself, you need one of the
-Info formatting programs, such as @code{texinfo-format-buffer} or
-@code{makeinfo}.
+@item reserved
+@tab @code{e}
+@tab Reserved for future use
-If you have @code{makeinfo} installed, and are in the top level
-@value{GDBN} source directory (@file{gdb-@value{GDBVN}}, in the case of
-version @value{GDBVN}), you can make the Info file by typing:
+@item reserved
+@tab @code{E}
+@tab Reserved for future use
-@example
-cd gdb
-make gdb.info
-@end example
+@item reserved
+@tab @code{f}
+@tab Reserved for future use
-If you want to typeset and print copies of this manual, you need @TeX{},
-a program to print its @sc{dvi} output files, and @file{texinfo.tex}, the
-Texinfo definitions file.
+@item reserved
+@tab @code{F}
+@tab Reserved for future use
-@TeX{} is a typesetting program; it does not print files directly, but
-produces output files called @sc{dvi} files. To print a typeset
-document, you need a program to print @sc{dvi} files. If your system
-has @TeX{} installed, chances are it has such a program. The precise
-command to use depends on your system; @kbd{lpr -d} is common; another
-(for PostScript devices) is @kbd{dvips}. The @sc{dvi} print command may
-require a file name without any extension or a @samp{.dvi} extension.
+@item read registers
+@tab @code{g}
+@tab Read general registers.
+@item
+@tab reply @var{XX...}
+@tab
+Each byte of register data is described by two hex digits. The bytes
+with the register are transmitted in target byte order. The size of
+each register and their position within the @samp{g} @var{packet} are
+determined by the @value{GDBN} internal macros @var{REGISTER_RAW_SIZE} and
+@var{REGISTER_NAME} macros. The specification of several standard
+@code{g} packets is specified below.
+@item
+@tab @code{E}@var{NN}
+@tab for an error.
-@TeX{} also requires a macro definitions file called
-@file{texinfo.tex}. This file tells @TeX{} how to typeset a document
-written in Texinfo format. On its own, @TeX{} cannot either read or
-typeset a Texinfo file. @file{texinfo.tex} is distributed with GDB
-and is located in the @file{gdb-@var{version-number}/texinfo}
-directory.
+@item write regs
+@tab @code{G}@var{XX...}
+@tab
+See @samp{g} for a description of the @var{XX...} data.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
-If you have @TeX{} and a @sc{dvi} printer program installed, you can
-typeset and print this manual. First switch to the the @file{gdb}
-subdirectory of the main source directory (for example, to
-@file{gdb-@value{GDBVN}/gdb}) and type:
+@item reserved
+@tab @code{h}
+@tab Reserved for future use
-@example
-make gdb.dvi
-@end example
+@item set thread
+@tab @code{H}@var{c}@var{t...}
+@tab
+Set thread for subsequent operations (@samp{m}, @samp{M}, @samp{g},
+@samp{G}, et.al.). @var{c} = @samp{c} for thread used in step and
+continue; @var{t...} can be -1 for all threads. @var{c} = @samp{g} for
+thread used in other operations. If zero, pick a thread, any thread.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
-Then give @file{gdb.dvi} to your @sc{dvi} printing program.
+@c FIXME: JTC:
+@c 'H': How restrictive (or permissive) is the thread model. If a
+@c thread is selected and stopped, are other threads allowed
+@c to continue to execute? As I mentioned above, I think the
+@c semantics of each command when a thread is selected must be
+@c described. For example:
+@c
+@c 'g': If the stub supports threads and a specific thread is
+@c selected, returns the register block from that thread;
+@c otherwise returns current registers.
+@c
+@c 'G' If the stub supports threads and a specific thread is
+@c selected, sets the registers of the register block of
+@c that thread; otherwise sets current registers.
-@node Installing GDB
-@appendix Installing @value{GDBN}
-@cindex configuring @value{GDBN}
-@cindex installation
+@item cycle step @strong{(draft)}
+@tab @code{i}@var{addr}@code{,}@var{nnn}
+@tab
+Step the remote target by a single clock cycle. If @code{,}@var{nnn} is
+present, cycle step @var{nnn} cycles. If @var{addr} is present, cycle
+step starting at that address.
-@value{GDBN} comes with a @code{configure} script that automates the process
-of preparing @value{GDBN} for installation; you can then use @code{make} to
-build the @code{gdb} program.
-@iftex
-@c irrelevant in info file; it's as current as the code it lives with.
-@footnote{If you have a more recent version of @value{GDBN} than @value{GDBVN},
-look at the @file{README} file in the sources; we may have improved the
-installation procedures since publishing this manual.}
-@end iftex
+@item signal then cycle step @strong{(reserved)}
+@tab @code{I}
+@tab
+See @samp{i} and @samp{S} for likely syntax and semantics.
-The @value{GDBN} distribution includes all the source code you need for
-@value{GDBN} in a single directory, whose name is usually composed by
-appending the version number to @samp{gdb}.
+@item reserved
+@tab @code{j}
+@tab Reserved for future use
-For example, the @value{GDBN} version @value{GDBVN} distribution is in the
-@file{gdb-@value{GDBVN}} directory. That directory contains:
+@item reserved
+@tab @code{J}
+@tab Reserved for future use
-@table @code
-@item gdb-@value{GDBVN}/configure @r{(and supporting files)}
-script for configuring @value{GDBN} and all its supporting libraries
+@item kill request
+@tab @code{k}
+@tab
+FIXME: @emph{There is no description of how operate when a specific
+thread context has been selected (ie. does 'k' kill only that thread?)}.
-@item gdb-@value{GDBVN}/gdb
-the source specific to @value{GDBN} itself
+@item reserved
+@tab @code{l}
+@tab Reserved for future use
-@item gdb-@value{GDBVN}/bfd
-source for the Binary File Descriptor library
+@item reserved
+@tab @code{L}
+@tab Reserved for future use
-@item gdb-@value{GDBVN}/include
-@sc{gnu} include files
+@item read memory
+@tab @code{m}@var{addr}@code{,}@var{length}
+@tab
+Read @var{length} bytes of memory starting at address @var{addr}.
+Neither @value{GDBN} nor the stub assume that sized memory transfers are assumed
+using word alligned accesses. FIXME: @emph{A word aligned memory
+transfer mechanism is needed.}
+@item
+@tab reply @var{XX...}
+@tab
+@var{XX...} is mem contents. Can be fewer bytes than requested if able
+to read only part of the data. Neither @value{GDBN} nor the stub assume that
+sized memory transfers are assumed using word alligned accesses. FIXME:
+@emph{A word aligned memory transfer mechanism is needed.}
+@item
+@tab reply @code{E}@var{NN}
+@tab @var{NN} is errno
-@item gdb-@value{GDBVN}/libiberty
-source for the @samp{-liberty} free software library
+@item write mem
+@tab @code{M}@var{addr},@var{length}@code{:}@var{XX...}
+@tab
+Write @var{length} bytes of memory starting at address @var{addr}.
+@var{XX...} is the data.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab
+for an error (this includes the case where only part of the data was
+written).
-@item gdb-@value{GDBVN}/opcodes
-source for the library of opcode tables and disassemblers
+@item reserved
+@tab @code{n}
+@tab Reserved for future use
-@item gdb-@value{GDBVN}/readline
-source for the @sc{gnu} command-line interface
+@item reserved
+@tab @code{N}
+@tab Reserved for future use
-@item gdb-@value{GDBVN}/glob
-source for the @sc{gnu} filename pattern-matching subroutine
+@item reserved
+@tab @code{o}
+@tab Reserved for future use
-@item gdb-@value{GDBVN}/mmalloc
-source for the @sc{gnu} memory-mapped malloc package
-@end table
+@item reserved
+@tab @code{O}
+@tab Reserved for future use
-The simplest way to configure and build @value{GDBN} is to run @code{configure}
-from the @file{gdb-@var{version-number}} source directory, which in
-this example is the @file{gdb-@value{GDBVN}} directory.
+@item read reg @strong{(reserved)}
+@tab @code{p}@var{n...}
+@tab
+See write register.
+@item
+@tab return @var{r....}
+@tab The hex encoded value of the register in target byte order.
-First switch to the @file{gdb-@var{version-number}} source directory
-if you are not already in it; then run @code{configure}. Pass the
-identifier for the platform on which @value{GDBN} will run as an
-argument.
+@item write reg
+@tab @code{P}@var{n...}@code{=}@var{r...}
+@tab
+Write register @var{n...} with value @var{r...}, which contains two hex
+digits for each byte in the register (target byte order).
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
-For example:
+@item general query
+@tab @code{q}@var{query}
+@tab
+Request info about @var{query}. In general @value{GDBN} queries
+have a leading upper case letter. Custom vendor queries should use a
+company prefix (in lower case) ex: @samp{qfsf.var}. @var{query} may
+optionally be followed by a @samp{,} or @samp{;} separated list. Stubs
+must ensure that they match the full @var{query} name.
+@item
+@tab reply @code{XX...}
+@tab Hex encoded data from query. The reply can not be empty.
+@item
+@tab reply @code{E}@var{NN}
+@tab error reply
+@item
+@tab reply @samp{}
+@tab Indicating an unrecognized @var{query}.
-@example
-cd gdb-@value{GDBVN}
-./configure @var{host}
-make
-@end example
+@item general set
+@tab @code{Q}@var{var}@code{=}@var{val}
+@tab
+Set value of @var{var} to @var{val}. See @samp{q} for a discussing of
+naming conventions.
-@noindent
-where @var{host} is an identifier such as @samp{sun4} or
-@samp{decstation}, that identifies the platform where @value{GDBN} will run.
-(You can often leave off @var{host}; @code{configure} tries to guess the
-correct value by examining your system.)
+@item reset @strong{(deprecated)}
+@tab @code{r}
+@tab
+Reset the entire system.
-Running @samp{configure @var{host}} and then running @code{make} builds the
-@file{bfd}, @file{readline}, @file{mmalloc}, and @file{libiberty}
-libraries, then @code{gdb} itself. The configured source files, and the
-binaries, are left in the corresponding source directories.
+@item remote restart
+@tab @code{R}@var{XX}
+@tab
+Restart the program being debugged. @var{XX}, while needed, is ignored.
+This packet is only available in extended mode.
+@item
+@tab
+no reply
+@tab
+The @samp{R} packet has no reply.
-@need 750
-@code{configure} is a Bourne-shell (@code{/bin/sh}) script; if your
-system does not recognize this automatically when you run a different
-shell, you may need to run @code{sh} on it explicitly:
+@item step
+@tab @code{s}@var{addr}
+@tab
+@var{addr} is address to resume. If @var{addr} is omitted, resume at
+same address.
+@item
+@tab reply
+@tab see below
-@example
-sh configure @var{host}
-@end example
+@item step with signal
+@tab @code{S}@var{sig}@code{;}@var{addr}
+@tab
+Like @samp{C} but step not continue.
+@item
+@tab reply
+@tab see below
-If you run @code{configure} from a directory that contains source
-directories for multiple libraries or programs, such as the
-@file{gdb-@value{GDBVN}} source directory for version @value{GDBVN}, @code{configure}
-creates configuration files for every directory level underneath (unless
-you tell it not to, with the @samp{--norecursion} option).
+@item search
+@tab @code{t}@var{addr}@code{:}@var{PP}@code{,}@var{MM}
+@tab
+Search backwards starting at address @var{addr} for a match with pattern
+@var{PP} and mask @var{MM}. @var{PP} and @var{MM} are 4
+bytes. @var{addr} must be at least 3 digits.
-You can run the @code{configure} script from any of the
-subordinate directories in the @value{GDBN} distribution if you only want to
-configure that subdirectory, but be sure to specify a path to it.
+@item thread alive
+@tab @code{T}@var{XX}
+@tab Find out if the thread XX is alive.
+@item
+@tab reply @code{OK}
+@tab thread is still alive
+@item
+@tab reply @code{E}@var{NN}
+@tab thread is dead
-For example, with version @value{GDBVN}, type the following to configure only
-the @code{bfd} subdirectory:
+@item reserved
+@tab @code{u}
+@tab Reserved for future use
-@example
-@group
-cd gdb-@value{GDBVN}/bfd
-../configure @var{host}
-@end group
-@end example
+@item reserved
+@tab @code{U}
+@tab Reserved for future use
-You can install @code{@value{GDBP}} anywhere; it has no hardwired paths.
-However, you should make sure that the shell on your path (named by
-the @samp{SHELL} environment variable) is publicly readable. Remember
-that @value{GDBN} uses the shell to start your program---some systems refuse to
-let @value{GDBN} debug child processes whose programs are not readable.
+@item reserved
+@tab @code{v}
+@tab Reserved for future use
-@menu
-* Separate Objdir:: Compiling @value{GDBN} in another directory
-* Config Names:: Specifying names for hosts and targets
-* Configure Options:: Summary of options for configure
-@end menu
+@item reserved
+@tab @code{V}
+@tab Reserved for future use
-@node Separate Objdir
-@section Compiling @value{GDBN} in another directory
+@item reserved
+@tab @code{w}
+@tab Reserved for future use
-If you want to run @value{GDBN} versions for several host or target machines,
-you need a different @code{gdb} compiled for each combination of
-host and target. @code{configure} is designed to make this easy by
-allowing you to generate each configuration in a separate subdirectory,
-rather than in the source directory. If your @code{make} program
-handles the @samp{VPATH} feature (@sc{gnu} @code{make} does), running
-@code{make} in each of these directories builds the @code{gdb}
-program specified there.
+@item reserved
+@tab @code{W}
+@tab Reserved for future use
-To build @code{gdb} in a separate directory, run @code{configure}
-with the @samp{--srcdir} option to specify where to find the source.
-(You also need to specify a path to find @code{configure}
-itself from your working directory. If the path to @code{configure}
-would be the same as the argument to @samp{--srcdir}, you can leave out
-the @samp{--srcdir} option; it is assumed.)
+@item reserved
+@tab @code{x}
+@tab Reserved for future use
-For example, with version @value{GDBVN}, you can build @value{GDBN} in a
-separate directory for a Sun 4 like this:
+@item write mem (binary)
+@tab @code{X}@var{addr}@code{,}@var{length}@var{:}@var{XX...}
+@tab
+@var{addr} is address, @var{length} is number of bytes, @var{XX...} is
+binary data. The characters @code{$}, @code{#}, and @code{0x7d} are
+escaped using @code{0x7d}.
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
-@example
-@group
-cd gdb-@value{GDBVN}
-mkdir ../gdb-sun4
-cd ../gdb-sun4
-../gdb-@value{GDBVN}/configure sun4
-make
-@end group
-@end example
+@item reserved
+@tab @code{y}
+@tab Reserved for future use
-When @code{configure} builds a configuration using a remote source
-directory, it creates a tree for the binaries with the same structure
-(and using the same names) as the tree under the source directory. In
-the example, you'd find the Sun 4 library @file{libiberty.a} in the
-directory @file{gdb-sun4/libiberty}, and @value{GDBN} itself in
-@file{gdb-sun4/gdb}.
+@item reserved
+@tab @code{Y}
+@tab Reserved for future use
-One popular reason to build several @value{GDBN} configurations in separate
-directories is to configure @value{GDBN} for cross-compiling (where
-@value{GDBN} runs on one machine---the @dfn{host}---while debugging
-programs that run on another machine---the @dfn{target}).
-You specify a cross-debugging target by
-giving the @samp{--target=@var{target}} option to @code{configure}.
+@item remove break or watchpoint @strong{(draft)}
+@tab @code{z}@var{t}@code{,}@var{addr}@code{,}@var{length}
+@tab
+See @samp{Z}.
-When you run @code{make} to build a program or library, you must run
-it in a configured directory---whatever directory you were in when you
-called @code{configure} (or one of its subdirectories).
+@item insert break or watchpoint @strong{(draft)}
+@tab @code{Z}@var{t}@code{,}@var{addr}@code{,}@var{length}
+@tab
+@var{t} is type: @samp{0} - software breakpoint, @samp{1} - hardware
+breakpoint, @samp{2} - write watchpoint, @samp{3} - read watchpoint,
+@samp{4} - access watchpoint; @var{addr} is address; @var{length} is in
+bytes. For a software breakpoint, @var{length} specifies the size of
+the instruction to be patched. For hardware breakpoints and watchpoints
+@var{length} specifies the memory region to be monitored. To avoid
+potential problems with duplicate packets, the operations should be
+implemented in an idempotent way.
+@item
+@tab reply @code{E}@var{NN}
+@tab for an error
+@item
+@tab reply @code{OK}
+@tab for success
+@item
+@tab @samp{}
+@tab If not supported.
-The @code{Makefile} that @code{configure} generates in each source
-directory also runs recursively. If you type @code{make} in a source
-directory such as @file{gdb-@value{GDBVN}} (or in a separate configured
-directory configured with @samp{--srcdir=@var{dirname}/gdb-@value{GDBVN}}), you
-will build all the required libraries, and then build GDB.
+@item reserved
+@tab <other>
+@tab Reserved for future use
-When you have multiple hosts or targets configured in separate
-directories, you can run @code{make} on them in parallel (for example,
-if they are NFS-mounted on each of the hosts); they will not interfere
-with each other.
+@end multitable
-@node Config Names
-@section Specifying names for hosts and targets
+The @samp{C}, @samp{c}, @samp{S}, @samp{s} and @samp{?} packets can
+receive any of the below as a reply. In the case of the @samp{C},
+@samp{c}, @samp{S} and @samp{s} packets, that reply is only returned
+when the target halts. In the below the exact meaning of @samp{signal
+number} is poorly defined. In general one of the UNIX signal numbering
+conventions is used.
-The specifications used for hosts and targets in the @code{configure}
-script are based on a three-part naming scheme, but some short predefined
-aliases are also supported. The full naming scheme encodes three pieces
-of information in the following pattern:
+@multitable @columnfractions .4 .6
-@example
-@var{architecture}-@var{vendor}-@var{os}
-@end example
+@item @code{S}@var{AA}
+@tab @var{AA} is the signal number
-For example, you can use the alias @code{sun4} as a @var{host} argument,
-or as the value for @var{target} in a @code{--target=@var{target}}
-option. The equivalent full name is @samp{sparc-sun-sunos4}.
+@item @code{T}@var{AA}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}
+@tab
+@var{AA} = two hex digit signal number; @var{n...} = register number
+(hex), @var{r...} = target byte ordered register contents, size defined
+by @code{REGISTER_RAW_SIZE}; @var{n...} = @samp{thread}, @var{r...} =
+thread process ID, this is a hex integer; @var{n...} = other string not
+starting with valid hex digit. @value{GDBN} should ignore this
+@var{n...}, @var{r...} pair and go on to the next. This way we can
+extend the protocol.
-The @code{configure} script accompanying @value{GDBN} does not provide
-any query facility to list all supported host and target names or
-aliases. @code{configure} calls the Bourne shell script
-@code{config.sub} to map abbreviations to full names; you can read the
-script, if you wish, or you can use it to test your guesses on
-abbreviations---for example:
+@item @code{W}@var{AA}
+@tab
+The process exited, and @var{AA} is the exit status. This is only
+applicable for certains sorts of targets.
-@smallexample
-% sh config.sub i386-linux
-i386-pc-linux-gnu
-% sh config.sub alpha-linux
-alpha-unknown-linux-gnu
-% sh config.sub hp9k700
-hppa1.1-hp-hpux
-% sh config.sub sun4
-sparc-sun-sunos4.1.1
-% sh config.sub sun3
-m68k-sun-sunos4.1.1
-% sh config.sub i986v
-Invalid configuration `i986v': machine `i986v' not recognized
-@end smallexample
+@item @code{X}@var{AA}
+@tab
+The process terminated with signal @var{AA}.
-@noindent
-@code{config.sub} is also distributed in the @value{GDBN} source
-directory (@file{gdb-@value{GDBVN}}, for version @value{GDBVN}).
+@item @code{N}@var{AA}@code{;}@var{t...}@code{;}@var{d...}@code{;}@var{b...} @strong{(obsolete)}
+@tab
+@var{AA} = signal number; @var{t...} = address of symbol "_start";
+@var{d...} = base of data section; @var{b...} = base of bss section.
+@emph{Note: only used by Cisco Systems targets. The difference between
+this reply and the "qOffsets" query is that the 'N' packet may arrive
+spontaneously whereas the 'qOffsets' is a query initiated by the host
+debugger.}
-@node Configure Options
-@section @code{configure} options
+@item @code{O}@var{XX...}
+@tab
+@var{XX...} is hex encoding of @sc{ascii} data. This can happen at any time
+while the program is running and the debugger should continue to wait
+for 'W', 'T', etc.
-Here is a summary of the @code{configure} options and arguments that
-are most often useful for building @value{GDBN}. @code{configure} also has
-several other options not listed here. @inforef{What Configure
-Does,,configure.info}, for a full explanation of @code{configure}.
+@end multitable
-@example
-configure @r{[}--help@r{]}
- @r{[}--prefix=@var{dir}@r{]}
- @r{[}--exec-prefix=@var{dir}@r{]}
- @r{[}--srcdir=@var{dirname}@r{]}
- @r{[}--norecursion@r{]} @r{[}--rm@r{]}
- @r{[}--target=@var{target}@r{]}
- @var{host}
-@end example
+The following set and query packets have already been defined.
-@noindent
-You may introduce options with a single @samp{-} rather than
-@samp{--} if you prefer; but you may abbreviate option names if you use
-@samp{--}.
+@multitable @columnfractions .2 .2 .6
-@table @code
-@item --help
-Display a quick summary of how to invoke @code{configure}.
+@item current thread
+@tab @code{q}@code{C}
+@tab Return the current thread id.
+@item
+@tab reply @code{QC}@var{pid}
+@tab
+Where @var{pid} is a HEX encoded 16 bit process id.
+@item
+@tab reply *
+@tab Any other reply implies the old pid.
-@item --prefix=@var{dir}
-Configure the source to install programs and files under directory
-@file{@var{dir}}.
+@item all thread ids
+@tab @code{q}@code{fThreadInfo}
+@item
+@tab @code{q}@code{sThreadInfo}
+@tab
+Obtain a list of active thread ids from the target (OS). Since there
+may be too many active threads to fit into one reply packet, this query
+works iteratively: it may require more than one query/reply sequence to
+obtain the entire list of threads. The first query of the sequence will
+be the @code{qf}@code{ThreadInfo} query; subsequent queries in the
+sequence will be the @code{qs}@code{ThreadInfo} query.
+@item
+@tab
+@tab NOTE: replaces the @code{qL} query (see below).
+@item
+@tab reply @code{m}@var{<id>}
+@tab A single thread id
+@item
+@tab reply @code{m}@var{<id>},@var{<id>...}
+@tab a comma-separated list of thread ids
+@item
+@tab reply @code{l}
+@tab (lower case 'el') denotes end of list.
+@item
+@tab
+@tab
+In response to each query, the target will reply with a list of one
+or more thread ids, in big-endian hex, separated by commas. GDB will
+respond to each reply with a request for more thread ids (using the
+@code{qs} form of the query), until the target responds with @code{l}
+(lower-case el, for @code{'last'}).
-@item --exec-prefix=@var{dir}
-Configure the source to install programs under directory
-@file{@var{dir}}.
+@item extra thread info
+@tab @code{q}@code{ThreadExtraInfo}@code{,}@var{id}
+@tab
+@item
+@tab
+@tab
+Where @var{<id>} is a thread-id in big-endian hex.
+Obtain a printable string description of a thread's attributes from
+the target OS. This string may contain anything that the target OS
+thinks is interesting for @value{GDBN} to tell the user about the thread.
+The string is displayed in @value{GDBN}'s @samp{info threads} display.
+Some examples of possible thread extra info strings are "Runnable", or
+"Blocked on Mutex".
+@item
+@tab reply @var{XX...}
+@tab
+Where @var{XX...} is a hex encoding of @sc{ascii} data, comprising the
+printable string containing the extra information about the thread's
+attributes.
-@c avoid splitting the warning from the explanation:
-@need 2000
-@item --srcdir=@var{dirname}
-@strong{Warning: using this option requires @sc{gnu} @code{make}, or another
-@code{make} that implements the @code{VPATH} feature.}@*
-Use this option to make configurations in directories separate from the
-@value{GDBN} source directories. Among other things, you can use this to
-build (or maintain) several configurations simultaneously, in separate
-directories. @code{configure} writes configuration specific files in
-the current directory, but arranges for them to use the source in the
-directory @var{dirname}. @code{configure} creates directories under
-the working directory in parallel to the source directories below
-@var{dirname}.
+@item query @var{LIST} or @var{threadLIST} @strong{(deprecated)}
+@tab @code{q}@code{L}@var{startflag}@var{threadcount}@var{nextthread}
+@tab
+@item
+@tab
+@tab
+Obtain thread information from RTOS. Where: @var{startflag} (one hex
+digit) is one to indicate the first query and zero to indicate a
+subsequent query; @var{threadcount} (two hex digits) is the maximum
+number of threads the response packet can contain; and @var{nextthread}
+(eight hex digits), for subsequent queries (@var{startflag} is zero), is
+returned in the response as @var{argthread}.
+@item
+@tab
+@tab NOTE: this query is replaced by the @code{q}@code{fThreadInfo}
+query (see above).
+@item
+@tab reply @code{q}@code{M}@var{count}@var{done}@var{argthread}@var{thread...}
+@tab
+@item
+@tab
+@tab
+Where: @var{count} (two hex digits) is the number of threads being
+returned; @var{done} (one hex digit) is zero to indicate more threads
+and one indicates no further threads; @var{argthreadid} (eight hex
+digits) is @var{nextthread} from the request packet; @var{thread...} is
+a sequence of thread IDs from the target. @var{threadid} (eight hex
+digits). See @code{remote.c:parse_threadlist_response()}.
-@item --norecursion
-Configure only the directory level where @code{configure} is executed; do not
-propagate configuration to subdirectories.
+@item compute CRC of memory block
+@tab @code{q}@code{CRC:}@var{addr}@code{,}@var{length}
+@tab
+@item
+@tab reply @code{E}@var{NN}
+@tab An error (such as memory fault)
+@item
+@tab reply @code{C}@var{CRC32}
+@tab A 32 bit cyclic redundancy check of the specified memory region.
-@item --target=@var{target}
-Configure @value{GDBN} for cross-debugging programs running on the specified
-@var{target}. Without this option, @value{GDBN} is configured to debug
-programs that run on the same machine (@var{host}) as @value{GDBN} itself.
+@item query sect offs
+@tab @code{q}@code{Offsets}
+@tab
+Get section offsets that the target used when re-locating the downloaded
+image. @emph{Note: while a @code{Bss} offset is included in the
+response, @value{GDBN} ignores this and instead applies the @code{Data}
+offset to the @code{Bss} section.}
+@item
+@tab reply @code{Text=}@var{xxx}@code{;Data=}@var{yyy}@code{;Bss=}@var{zzz}
-There is no convenient way to generate a list of all available targets.
+@item thread info request
+@tab @code{q}@code{P}@var{mode}@var{threadid}
+@tab
+@item
+@tab
+@tab
+Returns information on @var{threadid}. Where: @var{mode} is a hex
+encoded 32 bit mode; @var{threadid} is a hex encoded 64 bit thread ID.
+@item
+@tab reply *
+@tab
+See @code{remote.c:remote_unpack_thread_info_response()}.
-@item @var{host} @dots{}
-Configure @value{GDBN} to run on the specified @var{host}.
+@item remote command
+@tab @code{q}@code{Rcmd,}@var{COMMAND}
+@tab
+@item
+@tab
+@tab
+@var{COMMAND} (hex encoded) is passed to the local interpreter for
+execution. Invalid commands should be reported using the output string.
+Before the final result packet, the target may also respond with a
+number of intermediate @code{O}@var{OUTPUT} console output
+packets. @emph{Implementors should note that providing access to a
+stubs's interpreter may have security implications}.
+@item
+@tab reply @code{OK}
+@tab
+A command response with no output.
+@item
+@tab reply @var{OUTPUT}
+@tab
+A command response with the hex encoded output string @var{OUTPUT}.
+@item
+@tab reply @code{E}@var{NN}
+@tab
+Indicate a badly formed request.
-There is no convenient way to generate a list of all available hosts.
-@end table
+@item
+@tab reply @samp{}
+@tab
+When @samp{q}@samp{Rcmd} is not recognized.
-There are many other options available as well, but they are generally
-needed for special purposes only.
+@item symbol lookup
+@tab @code{qSymbol::}
+@tab
+Notify the target that @value{GDBN} is prepared to serve symbol lookup
+requests. Accept requests from the target for the values of symbols.
+@item
+@tab
+@tab
+@item
+@tab reply @code{OK}
+@tab
+The target does not need to look up any (more) symbols.
+@item
+@tab reply @code{qSymbol:}@var{sym_name}
+@tab
+@sp 2
+@noindent
+The target requests the value of symbol @var{sym_name} (hex encoded).
+@value{GDBN} may provide the value by using the
+@code{qSymbol:}@var{sym_value}:@var{sym_name}
+message, described below.
-@node Maintenance Commands
-@appendix Maintenance Commands
-@cindex maintenance commands
-@cindex internal commands
+@item symbol value
+@tab @code{qSymbol:}@var{sym_value}:@var{sym_name}
+@tab
+@sp 1
+@noindent
+Set the value of SYM_NAME to SYM_VALUE.
+@item
+@tab
+@tab
+@var{sym_name} (hex encoded) is the name of a symbol whose value
+the target has previously requested.
+@item
+@tab
+@tab
+@var{sym_value} (hex) is the value for symbol @var{sym_name}.
+If @value{GDBN} cannot supply a value for @var{sym_name}, then this
+field will be empty.
+@item
+@tab reply @code{OK}
+@tab
+The target does not need to look up any (more) symbols.
+@item
+@tab reply @code{qSymbol:}@var{sym_name}
+@tab
+@sp 2
+@noindent
+The target requests the value of a new symbol @var{sym_name} (hex encoded).
+@value{GDBN} will continue to supply the values of symbols (if available),
+until the target ceases to request them.
-In addition to commands intended for @value{GDBN} users, @value{GDBN}
-includes a number of commands intended for @value{GDBN} developers.
-These commands are provided here for reference.
+@end multitable
-@table @code
-@kindex maint info breakpoints
-@item @anchor{maint info breakpoints}maint info breakpoints
-Using the same format as @samp{info breakpoints}, display both the
-breakpoints you've set explicitly, and those @value{GDBN} is using for
-internal purposes. Internal breakpoints are shown with negative
-breakpoint numbers. The type column identifies what kind of breakpoint
-is shown:
+The following @samp{g}/@samp{G} packets have previously been defined.
+In the below, some thirty-two bit registers are transferred as sixty-four
+bits. Those registers should be zero/sign extended (which?) to fill the
+space allocated. Register bytes are transfered in target byte order.
+The two nibbles within a register byte are transfered most-significant -
+least-significant.
-@table @code
-@item breakpoint
-Normal, explicitly set breakpoint.
+@multitable @columnfractions .5 .5
-@item watchpoint
-Normal, explicitly set watchpoint.
+@item MIPS32
+@tab
+All registers are transfered as thirty-two bit quantities in the order:
+32 general-purpose; sr; lo; hi; bad; cause; pc; 32 floating-point
+registers; fsr; fir; fp.
-@item longjmp
-Internal breakpoint, used to handle correctly stepping through
-@code{longjmp} calls.
+@item MIPS64
+@tab
+All registers are transfered as sixty-four bit quantities (including
+thirty-two bit registers such as @code{sr}). The ordering is the same
+as @code{MIPS32}.
-@item longjmp resume
-Internal breakpoint at the target of a @code{longjmp}.
+@end multitable
-@item until
-Temporary internal breakpoint used by the @value{GDBN} @code{until} command.
+Example sequence of a target being re-started. Notice how the restart
+does not get any direct output:
-@item finish
-Temporary internal breakpoint used by the @value{GDBN} @code{finish} command.
+@example
+<- @code{R00}
+-> @code{+}
+@emph{target restarts}
+<- @code{?}
+-> @code{+}
+-> @code{T001:1234123412341234}
+<- @code{+}
+@end example
-@item shlib events
-Shared library events.
+Example sequence of a target being stepped by a single instruction:
-@end table
+@example
+<- @code{G1445...}
+-> @code{+}
+<- @code{s}
+-> @code{+}
+@emph{time passes}
+-> @code{T001:1234123412341234}
+<- @code{+}
+<- @code{g}
+-> @code{+}
+-> @code{1455...}
+<- @code{+}
+@end example
-@end table
@include fdl.texi
projects / binutils-gdb.git / commitdiff