#include "flags.h"
#include "recog.h"
#include "toplev.h"
+#include "cselib.h"
#include "obstack.h"
static bool try_optimize_cfg PARAMS ((int));
static bool try_simplify_condjump PARAMS ((basic_block));
static bool try_forward_edges PARAMS ((int, basic_block));
+static edge thread_jump PARAMS ((int, edge, basic_block));
+static bool mark_effect PARAMS ((rtx, bitmap));
static void notice_new_block PARAMS ((basic_block));
static void update_forwarder_flag PARAMS ((basic_block));
\f
return true;
}
\f
+/* Attempt to prove that operation is NOOP using CSElib or mark the effect
+ on register. Used by jump threading. */
+static bool
+mark_effect (exp, nonequal)
+ rtx exp;
+ regset nonequal;
+{
+ switch (GET_CODE (exp))
+ {
+ /* In case we do clobber the register, mark it as equal, as we know the
+ value is dead so it don't have to match. */
+ case CLOBBER:
+ if (REG_P (XEXP (exp, 0)))
+ CLEAR_REGNO_REG_SET (nonequal, REGNO (XEXP (exp, 0)));
+ return false;
+ case SET:
+ if (rtx_equal_for_cselib_p (SET_DEST (exp), SET_SRC (exp)))
+ return false;
+ if (GET_CODE (SET_SRC (exp)) != REG)
+ return true;
+ SET_REGNO_REG_SET (nonequal, REGNO (SET_SRC (exp)));
+ return false;
+ default:
+ return false;
+ }
+}
+/* Attempt to prove that the basic block B will have no side effects and
+ allways continues in the same edge if reached via E. Return the edge
+ if exist, NULL otherwise. */
+
+static edge
+thread_jump (mode, e, b)
+ int mode;
+ edge e;
+ basic_block b;
+{
+ rtx set1, set2, cond1, cond2, insn;
+ enum rtx_code code1, code2, reversed_code2;
+ bool reverse1 = false;
+ int i;
+ regset nonequal;
+ bool failed = false;
+
+ /* At the moment, we do handle only conditional jumps, but later we may
+ want to extend this code to tablejumps and others. */
+ if (!e->src->succ->succ_next || e->src->succ->succ_next->succ_next)
+ return NULL;
+ if (!b->succ || !b->succ->succ_next || b->succ->succ_next->succ_next)
+ return NULL;
+
+ /* Second branch must end with onlyjump, as we will eliminate the jump. */
+ if (!any_condjump_p (e->src->end) || !any_condjump_p (b->end)
+ || !onlyjump_p (b->end))
+ return NULL;
+
+ set1 = pc_set (e->src->end);
+ set2 = pc_set (b->end);
+ if (((e->flags & EDGE_FALLTHRU) != 0)
+ != (XEXP (SET_SRC (set1), 0) == pc_rtx))
+ reverse1 = true;
+
+ cond1 = XEXP (SET_SRC (set1), 0);
+ cond2 = XEXP (SET_SRC (set2), 0);
+ if (reverse1)
+ code1 = reversed_comparison_code (cond1, b->end);
+ else
+ code1 = GET_CODE (cond1);
+
+ code2 = GET_CODE (cond2);
+ reversed_code2 = reversed_comparison_code (cond2, b->end);
+
+ if (!comparison_dominates_p (code1, code2)
+ && !comparison_dominates_p (code1, reversed_code2))
+ return NULL;
+
+ /* Ensure that the comparison operators are equivalent.
+ ??? This is far too pesimistic. We should allow swapped operands,
+ different CCmodes, or for example comparisons for interval, that
+ dominate even when operands are not equivalent. */
+ if (!rtx_equal_p (XEXP (cond1, 0), XEXP (cond2, 0))
+ || !rtx_equal_p (XEXP (cond1, 1), XEXP (cond2, 1)))
+ return NULL;
+
+ /* Short circuit cases where block B contains some side effects, as we can't
+ safely bypass it. */
+ for (insn = NEXT_INSN (b->head); insn != NEXT_INSN (b->end);
+ insn = NEXT_INSN (insn))
+ if (INSN_P (insn) && side_effects_p (PATTERN (insn)))
+ return NULL;
+
+ cselib_init ();
+
+ /* First process all values computed in the source basic block. */
+ for (insn = NEXT_INSN (e->src->head); insn != NEXT_INSN (e->src->end);
+ insn = NEXT_INSN (insn))
+ if (INSN_P (insn))
+ cselib_process_insn (insn);
+
+ nonequal = BITMAP_XMALLOC();
+ CLEAR_REG_SET (nonequal);
+ /* Now assume that we've continued by the edge E to B and continue
+ processing as if it were same basic block.
+
+ Our goal is to prove that whole block is an NOOP. */
+ for (insn = NEXT_INSN (b->head); insn != b->end && !failed;
+ insn = NEXT_INSN (insn))
+ {
+ if (INSN_P (insn))
+ {
+ rtx pat = PATTERN (insn);
+
+ if (GET_CODE (pat) == PARALLEL)
+ {
+ for (i = 0; i < XVECLEN (pat, 0); i++)
+ failed |= mark_effect (XVECEXP (pat, 0, i), nonequal);
+ }
+ else
+ failed |= mark_effect (pat, nonequal);
+ }
+ cselib_process_insn (insn);
+ }
+
+ /* Later we should clear nonequal of dead registers. So far we don't
+ have life information in cfg_cleanup. */
+ if (failed)
+ goto failed_exit;
+
+ /* In case liveness information is available, we need to prove equivalence
+ only of the live values. */
+ if (mode & CLEANUP_UPDATE_LIFE)
+ AND_REG_SET (nonequal, b->global_live_at_end);
+
+ EXECUTE_IF_SET_IN_REG_SET (nonequal, 0, i, goto failed_exit;);
+
+ BITMAP_XFREE (nonequal);
+ cselib_finish ();
+ if ((comparison_dominates_p (code1, code2) != 0)
+ != (XEXP (SET_SRC (set2), 0) == pc_rtx))
+ return BRANCH_EDGE (b);
+ else
+ return FALLTHRU_EDGE (b);
+
+failed_exit:
+ BITMAP_XFREE (nonequal);
+ cselib_finish ();
+ return NULL;
+}
+\f
/* Attempt to forward edges leaving basic block B.
Return true if successful. */
int mode;
{
bool changed = false;
- edge e, next;
+ edge e, next, threaded_edge;
for (e = b->succ; e ; e = next)
{
basic_block target, first;
int counter;
+ bool threaded = false;
next = e->succ_next;
target = first = e->dest;
counter = 0;
- /* Look for the real destination of the jump.
- Avoid infinite loop in the infinite empty loop by counting
- up to n_basic_blocks. */
- while (FORWARDER_BLOCK_P (target)
- && target->succ->dest != EXIT_BLOCK_PTR
- && counter < n_basic_blocks)
+ while (counter < n_basic_blocks)
{
- /* Bypass trivial infinite loops. */
- if (target == target->succ->dest)
- counter = n_basic_blocks;
+ basic_block new_target = NULL;
+ bool new_target_threaded = false;
+
+ if (FORWARDER_BLOCK_P (target)
+ && target->succ->dest != EXIT_BLOCK_PTR)
+ {
+ /* Bypass trivial infinite loops. */
+ if (target == target->succ->dest)
+ counter = n_basic_blocks;
+ new_target = target->succ->dest;
+ }
+ /* Allow to thread only over one edge at time to simplify updating
+ of probabilities. */
+ else if ((mode & CLEANUP_THREADING) && !threaded)
+ {
+ threaded_edge = thread_jump (mode, e, target);
+ if (threaded_edge)
+ {
+ new_target = threaded_edge->dest;
+ new_target_threaded = true;
+ }
+ }
+ if (!new_target)
+ break;
/* Avoid killing of loop pre-headers, as it is the place loop
optimizer wants to hoist code to.
if (GET_CODE (insn) == NOTE)
break;
}
- target = target->succ->dest, counter++;
- }
+ counter++;
+ target = new_target;
+ threaded |= new_target_threaded;
+ }
if (counter >= n_basic_blocks)
{
/* Save the values now, as the edge may get removed. */
gcov_type edge_count = e->count;
int edge_probability = e->probability;
+ int edge_frequency;
- if (redirect_edge_and_branch (e, target))
+ if (threaded)
{
- /* We successfully forwarded the edge. Now update profile
- data: for each edge we traversed in the chain, remove
- the original edge's execution count. */
- int edge_frequency = ((edge_probability * b->frequency
- + REG_BR_PROB_BASE / 2)
- / REG_BR_PROB_BASE);
-
- if (!FORWARDER_BLOCK_P (b) && forwarder_block_p (b))
- BB_SET_FLAG (b, BB_FORWARDER_BLOCK);
- BB_SET_FLAG (b, BB_UPDATE_LIFE);
-
- do
- {
- first->count -= edge_count;
- first->succ->count -= edge_count;
- first->frequency -= edge_frequency;
- first = first->succ->dest;
- }
- while (first != target);
-
- changed = true;
+ notice_new_block (redirect_edge_and_branch_force (e, target));
+ if (rtl_dump_file)
+ fprintf (rtl_dump_file, "Conditionals threaded.\n");
}
- else
+ else if (!redirect_edge_and_branch (e, target))
{
if (rtl_dump_file)
fprintf (rtl_dump_file, "Forwarding edge %i->%i to %i failed.\n",
b->index, e->dest->index, target->index);
+ continue;
}
+ /* We successfully forwarded the edge. Now update profile
+ data: for each edge we traversed in the chain, remove
+ the original edge's execution count. */
+ edge_frequency = ((edge_probability * b->frequency
+ + REG_BR_PROB_BASE / 2)
+ / REG_BR_PROB_BASE);
+
+ if (!FORWARDER_BLOCK_P (b) && forwarder_block_p (b))
+ BB_SET_FLAG (b, BB_FORWARDER_BLOCK);
+ BB_SET_FLAG (b, BB_UPDATE_LIFE);
+
+ do
+ {
+ edge t;
+ first->count -= edge_count;
+ first->succ->count -= edge_count;
+ first->frequency -= edge_frequency;
+ if (first->succ->succ_next)
+ t = threaded_edge;
+ else
+ t = first->succ;
+ first = t->dest;
+ }
+ while (first != target);
+
+ changed = true;
}
}
static int invert_exp PARAMS ((rtx));
static int returnjump_p_1 PARAMS ((rtx *, void *));
static void delete_prior_computation PARAMS ((rtx, rtx));
-static void mark_modified_reg PARAMS ((rtx, rtx, void *));
\f
/* Alternate entry into the jump optimizer. This entry point only rebuilds
the JUMP_LABEL field in jumping insns and REG_LABEL notes in non-jumping
}
return -1;
}
-\f
-/* Optimize code of the form:
-
- for (x = a[i]; x; ...)
- ...
- for (x = a[i]; x; ...)
- ...
- foo:
-
- Loop optimize will change the above code into
-
- if (x = a[i])
- for (;;)
- { ...; if (! (x = ...)) break; }
- if (x = a[i])
- for (;;)
- { ...; if (! (x = ...)) break; }
- foo:
-
- In general, if the first test fails, the program can branch
- directly to `foo' and skip the second try which is doomed to fail.
- We run this after loop optimization and before flow analysis. */
-
-/* When comparing the insn patterns, we track the fact that different
- pseudo-register numbers may have been used in each computation.
- The following array stores an equivalence -- same_regs[I] == J means
- that pseudo register I was used in the first set of tests in a context
- where J was used in the second set. We also count the number of such
- pending equivalences. If nonzero, the expressions really aren't the
- same. */
-
-static int *same_regs;
-
-static int num_same_regs;
-
-/* Track any registers modified between the target of the first jump and
- the second jump. They never compare equal. */
-
-static char *modified_regs;
-
-/* Record if memory was modified. */
-
-static int modified_mem;
-
-/* Called via note_stores on each insn between the target of the first
- branch and the second branch. It marks any changed registers. */
-
-static void
-mark_modified_reg (dest, x, data)
- rtx dest;
- rtx x;
- void *data ATTRIBUTE_UNUSED;
-{
- int regno;
- unsigned int i;
-
- if (GET_CODE (dest) == SUBREG)
- dest = SUBREG_REG (dest);
-
- if (GET_CODE (dest) == MEM)
- modified_mem = 1;
-
- if (GET_CODE (dest) != REG)
- return;
-
- regno = REGNO (dest);
- if (regno >= FIRST_PSEUDO_REGISTER)
- modified_regs[regno] = 1;
- /* Don't consider a hard condition code register as modified,
- if it is only being set. thread_jumps will check if it is set
- to the same value. */
- else if (GET_MODE_CLASS (GET_MODE (dest)) != MODE_CC
- || GET_CODE (x) != SET
- || ! rtx_equal_p (dest, SET_DEST (x))
- || HARD_REGNO_NREGS (regno, GET_MODE (dest)) != 1)
- for (i = 0; i < HARD_REGNO_NREGS (regno, GET_MODE (dest)); i++)
- modified_regs[regno + i] = 1;
-}
-
-/* F is the first insn in the chain of insns. */
-
-void
-thread_jumps (f, max_reg, flag_before_loop)
- rtx f;
- int max_reg;
- int flag_before_loop;
-{
- /* Basic algorithm is to find a conditional branch,
- the label it may branch to, and the branch after
- that label. If the two branches test the same condition,
- walk back from both branch paths until the insn patterns
- differ, or code labels are hit. If we make it back to
- the target of the first branch, then we know that the first branch
- will either always succeed or always fail depending on the relative
- senses of the two branches. So adjust the first branch accordingly
- in this case. */
-
- rtx label, b1, b2, t1, t2;
- enum rtx_code code1, code2;
- rtx b1op0, b1op1, b2op0, b2op1;
- int changed = 1;
- int i;
- int *all_reset;
- enum rtx_code reversed_code1, reversed_code2;
-
- /* Allocate register tables and quick-reset table. */
- modified_regs = (char *) xmalloc (max_reg * sizeof (char));
- same_regs = (int *) xmalloc (max_reg * sizeof (int));
- all_reset = (int *) xmalloc (max_reg * sizeof (int));
- for (i = 0; i < max_reg; i++)
- all_reset[i] = -1;
-
- while (changed)
- {
- changed = 0;
-
- for (b1 = f; b1; b1 = NEXT_INSN (b1))
- {
- rtx set;
- rtx set2;
-
- /* Get to a candidate branch insn. */
- if (GET_CODE (b1) != JUMP_INSN
- || ! any_condjump_p (b1) || JUMP_LABEL (b1) == 0)
- continue;
-
- memset (modified_regs, 0, max_reg * sizeof (char));
- modified_mem = 0;
-
- memcpy (same_regs, all_reset, max_reg * sizeof (int));
- num_same_regs = 0;
-
- label = JUMP_LABEL (b1);
-
- /* Look for a branch after the target. Record any registers and
- memory modified between the target and the branch. Stop when we
- get to a label since we can't know what was changed there. */
- for (b2 = NEXT_INSN (label); b2; b2 = NEXT_INSN (b2))
- {
- if (GET_CODE (b2) == CODE_LABEL)
- break;
-
- else if (GET_CODE (b2) == JUMP_INSN)
- {
- /* If this is an unconditional jump and is the only use of
- its target label, we can follow it. */
- if (any_uncondjump_p (b2)
- && onlyjump_p (b2)
- && JUMP_LABEL (b2) != 0
- && LABEL_NUSES (JUMP_LABEL (b2)) == 1)
- {
- b2 = JUMP_LABEL (b2);
- continue;
- }
- else
- break;
- }
-
- if (GET_CODE (b2) != CALL_INSN && GET_CODE (b2) != INSN)
- continue;
-
- if (GET_CODE (b2) == CALL_INSN)
- {
- modified_mem = 1;
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (call_used_regs[i] && ! fixed_regs[i]
- && i != STACK_POINTER_REGNUM
- && i != FRAME_POINTER_REGNUM
- && i != HARD_FRAME_POINTER_REGNUM
- && i != ARG_POINTER_REGNUM)
- modified_regs[i] = 1;
- }
-
- note_stores (PATTERN (b2), mark_modified_reg, NULL);
- }
-
- /* Check the next candidate branch insn from the label
- of the first. */
- if (b2 == 0
- || GET_CODE (b2) != JUMP_INSN
- || b2 == b1
- || !any_condjump_p (b2)
- || !onlyjump_p (b2))
- continue;
- set = pc_set (b1);
- set2 = pc_set (b2);
-
- /* Get the comparison codes and operands, reversing the
- codes if appropriate. If we don't have comparison codes,
- we can't do anything. */
- b1op0 = XEXP (XEXP (SET_SRC (set), 0), 0);
- b1op1 = XEXP (XEXP (SET_SRC (set), 0), 1);
- code1 = GET_CODE (XEXP (SET_SRC (set), 0));
- reversed_code1 = code1;
- if (XEXP (SET_SRC (set), 1) == pc_rtx)
- code1 = reversed_comparison_code (XEXP (SET_SRC (set), 0), b1);
- else
- reversed_code1 = reversed_comparison_code (XEXP (SET_SRC (set), 0), b1);
-
- b2op0 = XEXP (XEXP (SET_SRC (set2), 0), 0);
- b2op1 = XEXP (XEXP (SET_SRC (set2), 0), 1);
- code2 = GET_CODE (XEXP (SET_SRC (set2), 0));
- reversed_code2 = code2;
- if (XEXP (SET_SRC (set2), 1) == pc_rtx)
- code2 = reversed_comparison_code (XEXP (SET_SRC (set2), 0), b2);
- else
- reversed_code2 = reversed_comparison_code (XEXP (SET_SRC (set2), 0), b2);
-
- /* If they test the same things and knowing that B1 branches
- tells us whether or not B2 branches, check if we
- can thread the branch. */
- if (rtx_equal_for_thread_p (b1op0, b2op0, b2)
- && rtx_equal_for_thread_p (b1op1, b2op1, b2)
- && (comparison_dominates_p (code1, code2)
- || comparison_dominates_p (code1, reversed_code2)))
-
- {
- t1 = prev_nonnote_insn (b1);
- t2 = prev_nonnote_insn (b2);
-
- while (t1 != 0 && t2 != 0)
- {
- if (t2 == label)
- {
- /* We have reached the target of the first branch.
- If there are no pending register equivalents,
- we know that this branch will either always
- succeed (if the senses of the two branches are
- the same) or always fail (if not). */
- rtx new_label;
-
- if (num_same_regs != 0)
- break;
-
- if (comparison_dominates_p (code1, code2))
- new_label = JUMP_LABEL (b2);
- else
- new_label = get_label_after (b2);
-
- if (JUMP_LABEL (b1) != new_label)
- {
- rtx prev = PREV_INSN (new_label);
-
- if (flag_before_loop
- && GET_CODE (prev) == NOTE
- && NOTE_LINE_NUMBER (prev) == NOTE_INSN_LOOP_BEG)
- {
- /* Don't thread to the loop label. If a loop
- label is reused, loop optimization will
- be disabled for that loop. */
- new_label = gen_label_rtx ();
- emit_label_after (new_label, PREV_INSN (prev));
- }
- changed |= redirect_jump (b1, new_label, 1);
- }
- break;
- }
-
- /* If either of these is not a normal insn (it might be
- a JUMP_INSN, CALL_INSN, or CODE_LABEL) we fail. (NOTEs
- have already been skipped above.) Similarly, fail
- if the insns are different. */
- if (GET_CODE (t1) != INSN || GET_CODE (t2) != INSN
- || recog_memoized (t1) != recog_memoized (t2)
- || ! rtx_equal_for_thread_p (PATTERN (t1),
- PATTERN (t2), t2))
- break;
-
- t1 = prev_nonnote_insn (t1);
- t2 = prev_nonnote_insn (t2);
- }
- }
- }
- }
-
- /* Clean up. */
- free (modified_regs);
- free (same_regs);
- free (all_reset);
-}
-\f
-/* This is like RTX_EQUAL_P except that it knows about our handling of
- possibly equivalent registers and knows to consider volatile and
- modified objects as not equal.
-
- YINSN is the insn containing Y. */
-
-int
-rtx_equal_for_thread_p (x, y, yinsn)
- rtx x, y;
- rtx yinsn;
-{
- int i;
- int j;
- enum rtx_code code;
- const char *fmt;
-
- code = GET_CODE (x);
- /* Rtx's of different codes cannot be equal. */
- if (code != GET_CODE (y))
- return 0;
-
- /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent.
- (REG:SI x) and (REG:HI x) are NOT equivalent. */
-
- if (GET_MODE (x) != GET_MODE (y))
- return 0;
-
- /* For floating-point, consider everything unequal. This is a bit
- pessimistic, but this pass would only rarely do anything for FP
- anyway. */
- if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT
- && FLOAT_MODE_P (GET_MODE (x)) && ! flag_unsafe_math_optimizations)
- return 0;
-
- /* For commutative operations, the RTX match if the operand match in any
- order. Also handle the simple binary and unary cases without a loop. */
- if (code == EQ || code == NE || GET_RTX_CLASS (code) == 'c')
- return ((rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn)
- && rtx_equal_for_thread_p (XEXP (x, 1), XEXP (y, 1), yinsn))
- || (rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 1), yinsn)
- && rtx_equal_for_thread_p (XEXP (x, 1), XEXP (y, 0), yinsn)));
- else if (GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == '2')
- return (rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn)
- && rtx_equal_for_thread_p (XEXP (x, 1), XEXP (y, 1), yinsn));
- else if (GET_RTX_CLASS (code) == '1')
- return rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn);
-
- /* Handle special-cases first. */
- switch (code)
- {
- case REG:
- if (REGNO (x) == REGNO (y) && ! modified_regs[REGNO (x)])
- return 1;
-
- /* If neither is user variable or hard register, check for possible
- equivalence. */
- if (REG_USERVAR_P (x) || REG_USERVAR_P (y)
- || REGNO (x) < FIRST_PSEUDO_REGISTER
- || REGNO (y) < FIRST_PSEUDO_REGISTER)
- return 0;
-
- if (same_regs[REGNO (x)] == -1)
- {
- same_regs[REGNO (x)] = REGNO (y);
- num_same_regs++;
-
- /* If this is the first time we are seeing a register on the `Y'
- side, see if it is the last use. If not, we can't thread the
- jump, so mark it as not equivalent. */
- if (REGNO_LAST_UID (REGNO (y)) != INSN_UID (yinsn))
- return 0;
-
- return 1;
- }
- else
- return (same_regs[REGNO (x)] == (int) REGNO (y));
-
- break;
-
- case MEM:
- /* If memory modified or either volatile, not equivalent.
- Else, check address. */
- if (modified_mem || MEM_VOLATILE_P (x) || MEM_VOLATILE_P (y))
- return 0;
-
- return rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn);
-
- case ASM_INPUT:
- if (MEM_VOLATILE_P (x) || MEM_VOLATILE_P (y))
- return 0;
-
- break;
-
- case SET:
- /* Cancel a pending `same_regs' if setting equivalenced registers.
- Then process source. */
- if (GET_CODE (SET_DEST (x)) == REG
- && GET_CODE (SET_DEST (y)) == REG)
- {
- if (same_regs[REGNO (SET_DEST (x))] == (int) REGNO (SET_DEST (y)))
- {
- same_regs[REGNO (SET_DEST (x))] = -1;
- num_same_regs--;
- }
- else if (REGNO (SET_DEST (x)) != REGNO (SET_DEST (y)))
- return 0;
- }
- else
- {
- if (rtx_equal_for_thread_p (SET_DEST (x), SET_DEST (y), yinsn) == 0)
- return 0;
- }
-
- return rtx_equal_for_thread_p (SET_SRC (x), SET_SRC (y), yinsn);
-
- case LABEL_REF:
- return XEXP (x, 0) == XEXP (y, 0);
-
- case SYMBOL_REF:
- return XSTR (x, 0) == XSTR (y, 0);
-
- default:
- break;
- }
-
- if (x == y)
- return 1;
-
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- {
- switch (fmt[i])
- {
- case 'w':
- if (XWINT (x, i) != XWINT (y, i))
- return 0;
- break;
-
- case 'n':
- case 'i':
- if (XINT (x, i) != XINT (y, i))
- return 0;
- break;
-
- case 'V':
- case 'E':
- /* Two vectors must have the same length. */
- if (XVECLEN (x, i) != XVECLEN (y, i))
- return 0;
-
- /* And the corresponding elements must match. */
- for (j = 0; j < XVECLEN (x, i); j++)
- if (rtx_equal_for_thread_p (XVECEXP (x, i, j),
- XVECEXP (y, i, j), yinsn) == 0)
- return 0;
- break;
-
- case 'e':
- if (rtx_equal_for_thread_p (XEXP (x, i), XEXP (y, i), yinsn) == 0)
- return 0;
- break;
-
- case 'S':
- case 's':
- if (strcmp (XSTR (x, i), XSTR (y, i)))
- return 0;
- break;
-
- case 'u':
- /* These are just backpointers, so they don't matter. */
- break;
-
- case '0':
- case 't':
- break;
-
- /* It is believed that rtx's at this level will never
- contain anything but integers and other rtx's,
- except for within LABEL_REFs and SYMBOL_REFs. */
- default:
- abort ();
- }
- }
- return 1;
-}