CONST char *which));
static char *ecoff_type_to_string PARAMS ((bfd *abfd, union aux_ext *aux_ptr,
unsigned int indx, int bigendian));
-static bfd_reloc_status_type ecoff_generic_reloc PARAMS ((bfd *abfd,
- arelent *reloc,
- asymbol *symbol,
- PTR data,
- asection *section,
- bfd *output_bfd));
-static bfd_reloc_status_type ecoff_refhi_reloc PARAMS ((bfd *abfd,
- arelent *reloc,
- asymbol *symbol,
- PTR data,
- asection *section,
- bfd *output_bfd));
-static bfd_reloc_status_type ecoff_reflo_reloc PARAMS ((bfd *abfd,
- arelent *reloc,
- asymbol *symbol,
- PTR data,
- asection *section,
- bfd *output_bfd));
-static bfd_reloc_status_type ecoff_gprel_reloc PARAMS ((bfd *abfd,
- arelent *reloc,
- asymbol *symbol,
- PTR data,
- asection *section,
- bfd *output_bfd));
static boolean ecoff_slurp_reloc_table PARAMS ((bfd *abfd, asection *section,
asymbol **symbols));
static void ecoff_clear_output_flags PARAMS ((bfd *abfd));
unsigned int size,
unsigned int hlog));
\f
-/* How to process the various relocs types. */
-
-static reloc_howto_type ecoff_howto_table[] =
-{
- /* Reloc type 0 is ignored. The reloc reading code ensures that
- this is a reference to the .abs section, which will cause
- bfd_perform_relocation to do nothing. */
- HOWTO (ECOFF_R_IGNORE, /* type */
- 0, /* rightshift */
- 0, /* size (0 = byte, 1 = short, 2 = long) */
- 8, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_dont, /* complain_on_overflow */
- 0, /* special_function */
- "IGNORE", /* name */
- false, /* partial_inplace */
- 0, /* src_mask */
- 0, /* dst_mask */
- false), /* pcrel_offset */
-
- /* A 16 bit reference to a symbol, normally from a data section. */
- HOWTO (ECOFF_R_REFHALF, /* type */
- 0, /* rightshift */
- 1, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- ecoff_generic_reloc, /* special_function */
- "REFHALF", /* name */
- true, /* partial_inplace */
- 0xffff, /* src_mask */
- 0xffff, /* dst_mask */
- false), /* pcrel_offset */
-
- /* A 32 bit reference to a symbol, normally from a data section. */
- HOWTO (ECOFF_R_REFWORD, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 32, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- ecoff_generic_reloc, /* special_function */
- "REFWORD", /* name */
- true, /* partial_inplace */
- 0xffffffff, /* src_mask */
- 0xffffffff, /* dst_mask */
- false), /* pcrel_offset */
-
- /* A 26 bit absolute jump address. */
- HOWTO (ECOFF_R_JMPADDR, /* type */
- 2, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 26, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- ecoff_generic_reloc, /* special_function */
- "JMPADDR", /* name */
- true, /* partial_inplace */
- 0x3ffffff, /* src_mask */
- 0x3ffffff, /* dst_mask */
- false), /* pcrel_offset */
-
- /* The high 16 bits of a symbol value. Handled by the function
- ecoff_refhi_reloc. */
- HOWTO (ECOFF_R_REFHI, /* type */
- 16, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- ecoff_refhi_reloc, /* special_function */
- "REFHI", /* name */
- true, /* partial_inplace */
- 0xffff, /* src_mask */
- 0xffff, /* dst_mask */
- false), /* pcrel_offset */
-
- /* The low 16 bits of a symbol value. */
- HOWTO (ECOFF_R_REFLO, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_dont, /* complain_on_overflow */
- ecoff_reflo_reloc, /* special_function */
- "REFLO", /* name */
- true, /* partial_inplace */
- 0xffff, /* src_mask */
- 0xffff, /* dst_mask */
- false), /* pcrel_offset */
-
- /* A reference to an offset from the gp register. Handled by the
- function ecoff_gprel_reloc. */
- HOWTO (ECOFF_R_GPREL, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_signed, /* complain_on_overflow */
- ecoff_gprel_reloc, /* special_function */
- "GPREL", /* name */
- true, /* partial_inplace */
- 0xffff, /* src_mask */
- 0xffff, /* dst_mask */
- false), /* pcrel_offset */
-
- /* A reference to a literal using an offset from the gp register.
- Handled by the function ecoff_gprel_reloc. */
- HOWTO (ECOFF_R_LITERAL, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_signed, /* complain_on_overflow */
- ecoff_gprel_reloc, /* special_function */
- "LITERAL", /* name */
- true, /* partial_inplace */
- 0xffff, /* src_mask */
- 0xffff, /* dst_mask */
- false) /* pcrel_offset */
-};
-
-#define ECOFF_HOWTO_COUNT \
- (sizeof ecoff_howto_table / sizeof ecoff_howto_table[0])
-\f
/* This stuff is somewhat copied from coffcode.h. */
static asection bfd_debug_section = { "*DEBUG*" };
asection *section;
arelent_chain *reloc_chain;
unsigned int bitsize;
- int reloc_index;
/* Get a section with the same name as the symbol (usually
__CTOR_LIST__ or __DTOR_LIST__). FIXME: gcc uses the
bfd_get_section (asym)->symbol_ptr_ptr;
reloc_chain->relent.address = section->_raw_size;
reloc_chain->relent.addend = asym->value;
-
- bitsize = ecoff_backend (abfd)->constructor_bitsize;
- switch (bitsize)
- {
- case 32:
- reloc_index = ECOFF_R_REFWORD;
- break;
- case 64:
- abort ();
- default:
- abort ();
- }
- reloc_chain->relent.howto = ecoff_howto_table + reloc_index;
+ reloc_chain->relent.howto =
+ ecoff_backend (abfd)->constructor_reloc;
/* Set up the constructor section to hold the reloc. */
section->flags = SEC_CONSTRUCTOR;
based on the bitsize. These are not real sections--
they are handled specially by the linker--so the ECOFF
16 byte alignment restriction does not apply. */
+ bitsize = ecoff_backend (abfd)->constructor_bitsize;
section->alignment_power = 1;
while ((1 << section->alignment_power) < bitsize / 8)
++section->alignment_power;
}
}
\f
-/* ECOFF relocs are either against external symbols, or against
- sections. If we are producing relocateable output, and the reloc
- is against an external symbol, and nothing has given us any
- additional addend, the resulting reloc will also be against the
- same symbol. In such a case, we don't want to change anything
- about the way the reloc is handled, since it will all be done at
- final link time. Rather than put special case code into
- bfd_perform_relocation, all the reloc types use this howto
- function. It just short circuits the reloc if producing
- relocateable output against an external symbol. */
-
-static bfd_reloc_status_type
-ecoff_generic_reloc (abfd,
- reloc_entry,
- symbol,
- data,
- input_section,
- output_bfd)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
-{
- if (output_bfd != (bfd *) NULL
- && (symbol->flags & BSF_SECTION_SYM) == 0
- && reloc_entry->addend == 0)
- {
- reloc_entry->address += input_section->output_offset;
- return bfd_reloc_ok;
- }
-
- return bfd_reloc_continue;
-}
-
-/* Do a REFHI relocation. This has to be done in combination with a
- REFLO reloc, because there is a carry from the REFLO to the REFHI.
- Here we just save the information we need; we do the actual
- relocation when we see the REFLO. ECOFF requires that the REFLO
- immediately follow the REFHI, so this ought to work. */
-
-static bfd_byte *ecoff_refhi_addr;
-static bfd_vma ecoff_refhi_addend;
-
-static bfd_reloc_status_type
-ecoff_refhi_reloc (abfd,
- reloc_entry,
- symbol,
- data,
- input_section,
- output_bfd)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
-{
- bfd_reloc_status_type ret;
- bfd_vma relocation;
-
- /* If we're relocating, and this an external symbol, we don't want
- to change anything. */
- if (output_bfd != (bfd *) NULL
- && (symbol->flags & BSF_SECTION_SYM) == 0
- && reloc_entry->addend == 0)
- {
- reloc_entry->address += input_section->output_offset;
- return bfd_reloc_ok;
- }
-
- ret = bfd_reloc_ok;
- if (symbol->section == &bfd_und_section
- && output_bfd == (bfd *) NULL)
- ret = bfd_reloc_undefined;
-
- if (bfd_is_com_section (symbol->section))
- relocation = 0;
- else
- relocation = symbol->value;
-
- relocation += symbol->section->output_section->vma;
- relocation += symbol->section->output_offset;
- relocation += reloc_entry->addend;
-
- if (reloc_entry->address > input_section->_cooked_size)
- return bfd_reloc_outofrange;
-
- /* Save the information, and let REFLO do the actual relocation. */
- ecoff_refhi_addr = (bfd_byte *) data + reloc_entry->address;
- ecoff_refhi_addend = relocation;
-
- if (output_bfd != (bfd *) NULL)
- reloc_entry->address += input_section->output_offset;
-
- return ret;
-}
-
-/* Do a REFLO relocation. This is a straightforward 16 bit inplace
- relocation; this function exists in order to do the REFHI
- relocation described above. */
-
-static bfd_reloc_status_type
-ecoff_reflo_reloc (abfd,
- reloc_entry,
- symbol,
- data,
- input_section,
- output_bfd)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
-{
- if (ecoff_refhi_addr != (bfd_byte *) NULL)
- {
- unsigned long insn;
- unsigned long val;
- unsigned long vallo;
-
- /* Do the REFHI relocation. Note that we actually don't need to
- know anything about the REFLO itself, except where to find
- the low 16 bits of the addend needed by the REFHI. */
- insn = bfd_get_32 (abfd, ecoff_refhi_addr);
- vallo = (bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address)
- & 0xffff);
- val = ((insn & 0xffff) << 16) + vallo;
- val += ecoff_refhi_addend;
-
- /* The low order 16 bits are always treated as a signed value.
- Therefore, a negative value in the low order bits requires an
- adjustment in the high order bits. We need to make this
- adjustment in two ways: once for the bits we took from the
- data, and once for the bits we are putting back in to the
- data. */
- if ((vallo & 0x8000) != 0)
- val -= 0x10000;
- if ((val & 0x8000) != 0)
- val += 0x10000;
-
- insn = (insn &~ 0xffff) | ((val >> 16) & 0xffff);
- bfd_put_32 (abfd, insn, ecoff_refhi_addr);
-
- ecoff_refhi_addr = (bfd_byte *) NULL;
- }
-
- /* Now do the REFLO reloc in the usual way. */
- return ecoff_generic_reloc (abfd, reloc_entry, symbol, data,
- input_section, output_bfd);
-}
-
-/* Do a GPREL relocation. This is a 16 bit value which must become
- the offset from the gp register. */
-
-static bfd_reloc_status_type
-ecoff_gprel_reloc (abfd,
- reloc_entry,
- symbol,
- data,
- input_section,
- output_bfd)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
-{
- boolean relocateable;
- bfd_vma relocation;
- unsigned long val;
- unsigned long insn;
-
- /* If we're relocating, and this is an external symbol with no
- addend, we don't want to change anything. We will only have an
- addend if this is a newly created reloc, not read from an ECOFF
- file. */
- if (output_bfd != (bfd *) NULL
- && (symbol->flags & BSF_SECTION_SYM) == 0
- && reloc_entry->addend == 0)
- {
- reloc_entry->address += input_section->output_offset;
- return bfd_reloc_ok;
- }
-
- if (output_bfd != (bfd *) NULL)
- relocateable = true;
- else
- {
- relocateable = false;
- output_bfd = symbol->section->output_section->owner;
- }
-
- if (symbol->section == &bfd_und_section
- && relocateable == false)
- return bfd_reloc_undefined;
-
- /* We have to figure out the gp value, so that we can adjust the
- symbol value correctly. We look up the symbol _gp in the output
- BFD. If we can't find it, we're stuck. We cache it in the ECOFF
- target data. We don't need to adjust the symbol value for an
- external symbol if we are producing relocateable output. */
- if (ecoff_data (output_bfd)->gp == 0
- && (relocateable == false
- || (symbol->flags & BSF_SECTION_SYM) != 0))
- {
- if (relocateable != false)
- {
- /* Make up a value. */
- ecoff_data (output_bfd)->gp =
- symbol->section->output_section->vma + 0x4000;
- }
- else
- {
- unsigned int count;
- asymbol **sym;
- unsigned int i;
-
- count = bfd_get_symcount (output_bfd);
- sym = bfd_get_outsymbols (output_bfd);
-
- /* We should do something more friendly here, but we don't
- have a good reloc status to return. */
- if (sym == (asymbol **) NULL)
- abort ();
-
- for (i = 0; i < count; i++, sym++)
- {
- register CONST char *name;
-
- name = bfd_asymbol_name (*sym);
- if (*name == '_' && strcmp (name, "_gp") == 0)
- {
- ecoff_data (output_bfd)->gp = bfd_asymbol_value (*sym);
- break;
- }
- }
-
- /* We should do something more friendly here, but we don't have
- a good reloc status to return. */
- if (i >= count)
- abort ();
- }
- }
-
- if (bfd_is_com_section (symbol->section))
- relocation = 0;
- else
- relocation = symbol->value;
-
- relocation += symbol->section->output_section->vma;
- relocation += symbol->section->output_offset;
-
- if (reloc_entry->address > input_section->_cooked_size)
- return bfd_reloc_outofrange;
-
- insn = bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address);
-
- /* Set val to the offset into the section or symbol. */
- val = ((insn & 0xffff) + reloc_entry->addend) & 0xffff;
- if (val & 0x8000)
- val -= 0x10000;
-
- /* Adjust val for the final section location and GP value. If we
- are producing relocateable output, we don't want to do this for
- an external symbol. */
- if (relocateable == false
- || (symbol->flags & BSF_SECTION_SYM) != 0)
- val += relocation - ecoff_data (output_bfd)->gp;
-
- insn = (insn &~ 0xffff) | (val & 0xffff);
- bfd_put_32 (abfd, insn, (bfd_byte *) data + reloc_entry->address);
-
- if (relocateable != false)
- reloc_entry->address += input_section->output_offset;
-
- /* Make sure it fit in 16 bits. */
- if (val >= 0x8000 && val < 0xffff8000)
- return bfd_reloc_outofrange;
-
- return bfd_reloc_ok;
-}
-
/* Read in the relocs for a section. */
static boolean
external_relocs + i * external_reloc_size,
&intern);
- if (intern.r_type > ECOFF_R_LITERAL)
- abort ();
-
if (intern.r_extern)
{
/* r_symndx is an index into the external symbols. */
case RELOC_SECTION_INIT: sec_name = ".init"; break;
case RELOC_SECTION_LIT8: sec_name = ".lit8"; break;
case RELOC_SECTION_LIT4: sec_name = ".lit4"; break;
+ case RELOC_SECTION_XDATA: sec_name = ".xdata"; break;
+ case RELOC_SECTION_PDATA: sec_name = ".pdata"; break;
+ case RELOC_SECTION_LITA: sec_name = ".lita"; break;
+ case RELOC_SECTION_ABS: sec_name = ".abs"; break;
default: abort ();
}
sec = bfd_get_section_by_name (abfd, sec_name);
if (sec == (asection *) NULL)
- abort ();
+ sec = bfd_make_section (abfd, sec_name);
rptr->sym_ptr_ptr = sec->symbol_ptr_ptr;
rptr->addend = - bfd_get_section_vma (abfd, sec);
- if (intern.r_type == ECOFF_R_GPREL
- || intern.r_type == ECOFF_R_LITERAL)
- rptr->addend += ecoff_data (abfd)->gp;
}
rptr->address = intern.r_vaddr - bfd_get_section_vma (abfd, section);
- rptr->howto = &ecoff_howto_table[intern.r_type];
- /* If the type is ECOFF_R_IGNORE, make sure this is a reference
- to the absolute section so that the reloc is ignored. */
- if (intern.r_type == ECOFF_R_IGNORE)
- rptr->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
+ /* Let the backend select the howto field and do any other
+ required processing. */
+ (*backend->finish_reloc) (abfd, &intern, rptr);
}
bfd_release (abfd, external_relocs);
return section->reloc_count;
}
-
-/* Get the howto structure for a generic reloc type. */
-
-CONST struct reloc_howto_struct *
-ecoff_bfd_reloc_type_lookup (abfd, code)
- bfd *abfd;
- bfd_reloc_code_real_type code;
-{
- int ecoff_type;
-
- switch (code)
- {
- case BFD_RELOC_16:
- ecoff_type = ECOFF_R_REFHALF;
- break;
- case BFD_RELOC_32:
- ecoff_type = ECOFF_R_REFWORD;
- break;
- case BFD_RELOC_MIPS_JMP:
- ecoff_type = ECOFF_R_JMPADDR;
- break;
- case BFD_RELOC_HI16_S:
- ecoff_type = ECOFF_R_REFHI;
- break;
- case BFD_RELOC_LO16:
- ecoff_type = ECOFF_R_REFLO;
- break;
- case BFD_RELOC_MIPS_GPREL:
- ecoff_type = ECOFF_R_GPREL;
- break;
- default:
- return (CONST struct reloc_howto_struct *) NULL;
- }
-
- return &ecoff_howto_table[ecoff_type];
-}
\f
/* Provided a BFD, a section and an offset into the section, calculate
and return the name of the source file and the line nearest to the
reloc = *reloc_ptr_ptr;
sym = *reloc->sym_ptr_ptr;
- /* This must be an ECOFF reloc. */
- BFD_ASSERT (reloc->howto != (reloc_howto_type *) NULL
- && reloc->howto >= ecoff_howto_table
- && (reloc->howto
- < (ecoff_howto_table + ECOFF_HOWTO_COUNT)));
-
in.r_vaddr = reloc->address + bfd_get_section_vma (abfd, current);
in.r_type = reloc->howto->type;
- /* If this is a REFHI reloc, the next one must be a REFLO
- reloc for the same symbol. */
- BFD_ASSERT (in.r_type != ECOFF_R_REFHI
- || (reloc_ptr_ptr < reloc_end
- && (reloc_ptr_ptr[1]->howto
- != (reloc_howto_type *) NULL)
- && (reloc_ptr_ptr[1]->howto->type
- == ECOFF_R_REFLO)
- && (sym == *reloc_ptr_ptr[1]->sym_ptr_ptr)));
-
if ((sym->flags & BSF_SECTION_SYM) == 0)
{
in.r_symndx = ecoff_get_sym_index (*reloc->sym_ptr_ptr);
projects / binutils-gdb.git / commitdiff