* ChangeLog: Follow spelling conventions.
* ChangeLog.0: Likewise.
* ChangeLog.1: Likewise.
* ChangeLog.2: Likewise.
* ChangeLog.4: Likewise.
* ChangeLog.6: Likewise.
* config.gcc: Likewise.
* dwarfout.c: Likewise.
* reload1.c: Likewise.
* simplify-rtx.c: Likewise.
* unwind-sjlj.c: Likewise.
* config/avr/avr.h: Likewise.
* config/d30v/d30v.h: Likewise.
* config/frv/frv.c: Likewise.
* config/frv/frv.h: Likewise.
* config/ip2k/ip2k.h: Likewise.
* config/m88k/m88k-move.sh: Likewise.
* config/stormy16/stormy16.c: Likewise.
* config/stormy16/stormy16.h: Likewise.
* doc/extend.texi: Likewise.
* doc/interface.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/md.texi: Likewise.
* doc/rtl.texi: Likewise.
* doc/tm.texi: Likewise.
* doc/trouble.texi: Likewise.
* ginclude/float.h: Likewise.
* treelang/treelang.texi: Likewise.
From-SVN: r57179
+2002-09-15 Kazu Hirata <kazu@cs.umass.edu>
+
+ * ChangeLog: Follow spelling conventions.
+ * ChangeLog.0: Likewise.
+ * ChangeLog.1: Likewise.
+ * ChangeLog.2: Likewise.
+ * ChangeLog.4: Likewise.
+ * ChangeLog.6: Likewise.
+ * config.gcc: Likewise.
+ * dwarfout.c: Likewise.
+ * reload1.c: Likewise.
+ * simplify-rtx.c: Likewise.
+ * unwind-sjlj.c: Likewise.
+ * config/avr/avr.h: Likewise.
+ * config/d30v/d30v.h: Likewise.
+ * config/frv/frv.c: Likewise.
+ * config/frv/frv.h: Likewise.
+ * config/ip2k/ip2k.h: Likewise.
+ * config/m88k/m88k-move.sh: Likewise.
+ * config/stormy16/stormy16.c: Likewise.
+ * config/stormy16/stormy16.h: Likewise.
+ * doc/extend.texi: Likewise.
+ * doc/interface.texi: Likewise.
+ * doc/invoke.texi: Likewise.
+ * doc/md.texi: Likewise.
+ * doc/rtl.texi: Likewise.
+ * doc/tm.texi: Likewise.
+ * doc/trouble.texi: Likewise.
+ * ginclude/float.h: Likewise.
+ * treelang/treelang.texi: Likewise.
+
2002-09-15 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* i386-protos.h (i386_pe_dllexport_name_p,
config/sparc/ultra1_2.md, config/sparc/ultra3.md: ... into here.
* config/sparc/sparc.c (LEAF_REGISTERS): Do not do ifdef
- checks on it, always defined for Sparc.
+ checks on it, always defined for SPARC.
* config/sparc/sparc.h (REG_ALLOC_ORDER, REG_LEAF_ALLOC_ORDER):
Tweak, and add more detailed comments.
2001-09-25 David S. Miller <davem@redhat.com>
- Convert all of Sparc scheduling to DFA
+ Convert all of SPARC scheduling to DFA
* config/sparc/sparc.md: Kill all define_function_unit
directives and replace with DFA equivalent.
* config/sparc/sparc.c (ultrasparc_adjust_cost,
PR target/6420
* config/sparc/sparc.h (FUNCTION_OK_FOR_SIBCALL): Return false if
- 32-bit Sparc and current_function_returns_struct is true.
+ 32-bit SPARC and current_function_returns_struct is true.
Wed Apr 24 13:48:25 CEST 2002 Jan Hubicka <jh@suse.cz>
PR target/6082
* config/sparc/freebsd.h (SPARC_DEFAULT_CMODEL): Set to CM_MEDLOW
- Make init_priority work on Sparc when using GNU ld.
+ Make init_priority work on SPARC when using GNU ld.
* config/sparc/linux.h, config/sparc/linux64.h,
config/sparc/netbsd-elf.h, config/sparc/freebsd.h
(CTORS_SECTION_ASM_OP, DTORS_SECTION_ASM_OP): Undefine.
Sun May 3 13:51:34 1998 Richard Henderson <rth@cygnus.com>
- Support for official Sparc V9 ABI:
+ Support for official SPARC V9 ABI:
* sparc.c (sparc_override_options): Force stack bias off for !arch64.
Care for flag_pcc_struct_return default.
(output_move_quad): Rewrite to move by halves on v9 and in the
Thu Jan 7 03:03:42 1999 Stan Cox <scox@cygnus.com>
Richard Henderson <rth@cygnus.com>
- Support for Hypersparc and Sparclite86x:
+ Support for HyperSPARC and SPARClite86x:
* sparc.h (TARGET_CPU_hypersparc, TARGET_CPU_sparclite86x): New.
(CPP_CPU32_DEFAULT_SPEC): Fix up for the new targets.
(ASM_CPU32_DEFAULT_SPEC): Likewise.
Mon Aug 10 04:28:13 1998 David S. Miller <davem@pierdol.cobaltmicro.com>
Richard Henderson <rth@cygnus.com>
- Rewrite Sparc backend for better code generation and
+ Rewrite SPARC backend for better code generation and
improved sparc64 support.
* config/sparc/sp64-elf.h: Set JUMP_TABLES_IN_TEXT_SECTION to
zero.
(define_function_unit ieu1): New, executes compare, call, and
uncond_branch type insns.
(define_function_units for type fdivs, fdivd, fsqrt): These
- execute in the fpu multiply unit not the adder on UltraSparc.
+ execute in the fpu multiply unit not the adder on UltraSPARC.
(define_expand cmpdi): Disallow TARGET_V8PLUS.
(define_insn cmpsi_insn): Rename to cmpsi_insn_sp32.
(define_insn cmpsi_insn_sp64): New, same as sp32 variant except it
Mon Jul 27 11:43:54 1998 Stan Cox <scox@cygnus.com>
- * longlong.h (count_leading_zeros): Sparclite scan instruction was
+ * longlong.h (count_leading_zeros): SPARClite scan instruction was
being invoked incorrectly.
* i386.c (ix86_prologue): Added SUBTARGET_PROLOGUE invocation.
* config/sparc/sparc.md: Remove insn type fpsqrt, add fpsqrts
and fpsqrtd. Use them and create fdiv function unit to more
- accurately represent fpu sqrt pipeline semantics on UltraSparc.
+ accurately represent fpu sqrt pipeline semantics on UltraSPARC.
* config/sparc/sparc.c: Account for fpsqrt{s,d} changes.
Wed Nov 3 15:11:27 1999 Matteo Frigo <athena@fftw.org>
* config/sparc/sparc.md: Adjust FADD/FMUL result latencies to
- 3 on UltraSparc.
+ 3 on UltraSPARC.
* config/sparc/sparc.c (ultra_schedule_insn): Insert launched
insn into ready list, do not use just a raw swap.
2000-11-21 Jakub Jelinek <jakub@redhat.com>
- * configure.in (HAVE_AS_DWARF2_DEBUG_LINE): Sparc has .file/.loc
+ * configure.in (HAVE_AS_DWARF2_DEBUG_LINE): SPARC has .file/.loc
support in as as well.
* configure: Regenerate.
2001-11-01 David S. Miller <davem@redhat.com>
* doc/install.texi (Specific, sparc-sun-solaris2*): Bring
- 64-bit Sparc description more in line with reality.
+ 64-bit SPARC description more in line with reality.
2001-11-01 Joseph S. Myers <jsm28@cam.ac.uk>
tmake_file="sparc/t-elf sparc/t-crtfm"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
-sparc-*-linux*aout*) # Sparc's running GNU/Linux, a.out
+sparc-*-linux*aout*) # SPARC's running GNU/Linux, a.out
tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h"
gnu_ld=yes
;;
-sparc-*-linux*libc1*) # Sparc's running GNU/Linux, libc5
+sparc-*-linux*libc1*) # SPARC's running GNU/Linux, libc5
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 sparc/t-crtfm"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
;;
-sparc-*-linux*) # Sparc's running GNU/Linux, libc6
+sparc-*-linux*) # SPARC's running GNU/Linux, libc6
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
;;
*) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
esac
;;
-sparc64-*-linux*) # 64-bit Sparc's running GNU/Linux
+sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
;;
machines allow copying all registers to and from memory, but
require a scratch register for stores to some memory locations
(e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In
+ certain symbolic address on the SPARC when compiling PIC). In
some cases, both an intermediate and a scratch register are
required.
registers, but not memory. Some machines allow copying all registers to and
from memory, but require a scratch register for stores to some memory
locations (e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In some cases,
+ certain symbolic address on the SPARC when compiling PIC). In some cases,
both an intermediate and a scratch register are required.
You should define these macros to indicate to the reload phase that it may
/* If defined, a C expression that produces the machine-specific code to setup
the stack so that arbitrary frames can be accessed. For example, on the
- Sparc, we must flush all of the register windows to the stack before we can
+ SPARC, we must flush all of the register windows to the stack before we can
access arbitrary stack frames. This macro will seldom need to be defined. */
/* #define SETUP_FRAME_ADDRESSES() */
/* #define EXTRA_CC_MODES */
/* Returns a mode from class `MODE_CC' to be used when comparison operation
- code OP is applied to rtx X and Y. For example, on the Sparc,
+ code OP is applied to rtx X and Y. For example, on the SPARC,
`SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a
description of the reason for this definition)
You need not define this macro if it would always returns zero or if the
floating-point format is anything other than `IEEE_FLOAT_FORMAT'. For
- example, here is the definition used on the Sparc, where floating-point
+ example, here is the definition used on the SPARC, where floating-point
inequality comparisons are always given `CCFPEmode':
#define REVERSIBLE_CC_MODE(MODE) ((MODE) != CCFPEmode) */
registers, but not memory. Some machines allow copying all registers to and
from memory, but require a scratch register for stores to some memory
locations (e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In some cases,
+ certain symbolic address on the SPARC when compiling PIC). In some cases,
both an intermediate and a scratch register are required.
You should define these macros to indicate to the reload phase that it may
\f
/* Returns a mode from class `MODE_CC' to be used when comparison operation
- code OP is applied to rtx X and Y. For example, on the Sparc,
+ code OP is applied to rtx X and Y. For example, on the SPARC,
`SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a
description of the reason for this definition)
You need not define this macro if it would always returns zero or if the
floating-point format is anything other than `IEEE_FLOAT_FORMAT'. For
- example, here is the definition used on the Sparc, where floating-point
+ example, here is the definition used on the SPARC, where floating-point
inequality comparisons are always given `CCFPEmode':
#define REVERSIBLE_CC_MODE(MODE) ((MODE) != CCFPEmode) */
machines allow copying all registers to and from memory, but
require a scratch register for stores to some memory locations
(e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In
+ certain symbolic address on the SPARC when compiling PIC). In
some cases, both an intermediate and a scratch register are
required.
# 27-Aug-90 Vince Guarna/Tom Wood
# Version 3 assembler syntax (-abi).
# 16-Aug-90 Ron Guilmette
-# Avoid problems on a Sparc. The common
+# Avoid problems on a SPARC. The common
# denominator among shells seems to be '...\'
# rather than '...\\'.
# 15-Aug-90 Ron Guilmette
registers, but not memory. Some machines allow copying all registers to and
from memory, but require a scratch register for stores to some memory
locations (e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In some cases,
+ certain symbolic address on the SPARC when compiling PIC). In some cases,
both an intermediate and a scratch register are required.
You should define these macros to indicate to the reload phase that it may
registers, but not memory. Some machines allow copying all registers to and
from memory, but require a scratch register for stores to some memory
locations (e.g., those with symbolic address on the RT, and those with
- certain symbolic address on the Sparc when compiling PIC). In some cases,
+ certain symbolic address on the SPARC when compiling PIC). In some cases,
both an intermediate and a scratch register are required.
You should define these macros to indicate to the reload phase that it may
/* If defined, a C expression that produces the machine-specific code to setup
the stack so that arbitrary frames can be accessed. For example, on the
- Sparc, we must flush all of the register windows to the stack before we can
+ SPARC, we must flush all of the register windows to the stack before we can
access arbitrary stack frames. This macro will seldom need to be defined. */
/* #define SETUP_FRAME_ADDRESSES() */
/* #define EXTRA_CC_MODES */
/* Returns a mode from class `MODE_CC' to be used when comparison operation
- code OP is applied to rtx X and Y. For example, on the Sparc,
+ code OP is applied to rtx X and Y. For example, on the SPARC,
`SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a
description of the reason for this definition)
You need not define this macro if it would always returns zero or if the
floating-point format is anything other than `IEEE_FLOAT_FORMAT'. For
- example, here is the definition used on the Sparc, where floating-point
+ example, here is the definition used on the SPARC, where floating-point
inequality comparisons are always given `CCFPEmode':
#define REVERSIBLE_CC_MODE(MODE) ((MODE) != CCFPEmode) */
@noindent
force the compiler to insure (as far as it can) that each variable whose
type is @code{struct S} or @code{more_aligned_int} will be allocated and
-aligned @emph{at least} on a 8-byte boundary. On a Sparc, having all
+aligned @emph{at least} on a 8-byte boundary. On a SPARC, having all
variables of type @code{struct S} aligned to 8-byte boundaries allows
the compiler to use the @code{ldd} and @code{std} (doubleword load and
store) instructions when copying one variable of type @code{struct S} to
Global register variables may not have initial values, because an
executable file has no means to supply initial contents for a register.
-On the Sparc, there are reports that g3 @dots{} g7 are suitable
+On the SPARC, there are reports that g3 @dots{} g7 are suitable
registers, but certain library functions, such as @code{getwd}, as well
as the subroutines for division and remainder, modify g3 and g4. g1 and
g2 are local temporaries.
certain machines once we have a complete GNU system so that we can
compile the libraries with GCC@.
-On some machines (particularly the Sparc), certain types of arguments
+On some machines (particularly the SPARC), certain types of arguments
are passed ``by invisible reference''. This means that the value is
stored in memory, and the address of the memory location is passed to
the subroutine.
Use these options on systems where the linker can perform optimizations
to improve locality of reference in the instruction space. HPPA
-processors running HP-UX and Sparc processors running Solaris 2 have
+processors running HP-UX and SPARC processors running Solaris 2 have
linkers with such optimizations. Other systems using the ELF object format
as well as AIX may have these optimizations in the future.
should have 8 byte alignment. This enables the use of pairs of
@code{ldd} and @code{std} instructions for copies in structure
assignment, in place of twice as many @code{ld} and @code{st} pairs.
-However, the use of this changed alignment directly violates the Sparc
+However, the use of this changed alignment directly violates the SPARC
ABI@. Thus, it's intended only for use on targets where the developer
acknowledges that their resulting code will not be directly in line with
the rules of the ABI@.
These two options select the processor for which the code is optimized.
With @option{-mcypress} (the default), the compiler optimizes code for the
-Cypress CY7C602 chip, as used in the SparcStation/SparcServer 3xx series.
-This is also appropriate for the older SparcStation 1, 2, IPX etc.
+Cypress CY7C602 chip, as used in the SPARCStation/SPARCServer 3xx series.
+This is also appropriate for the older SPARCStation 1, 2, IPX etc.
-With @option{-msupersparc} the compiler optimizes code for the SuperSparc cpu, as
-used in the SparcStation 10, 1000 and 2000 series. This flag also enables use
+With @option{-msupersparc} the compiler optimizes code for the SuperSPARC cpu, as
+used in the SPARCStation 10, 1000 and 2000 series. This flag also enables use
of the full SPARC v8 instruction set.
These options are deprecated and will be deleted in a future GCC release.
the GOT size for the linked executable exceeds a machine-specific
maximum size, you get an error message from the linker indicating that
@option{-fpic} does not work; in that case, recompile with @option{-fPIC}
-instead. (These maximums are 16k on the m88k, 8k on the Sparc, and 32k
+instead. (These maximums are 16k on the m88k, 8k on the SPARC, and 32k
on the m68k and RS/6000. The 386 has no such limit.)
Position-independent code requires special support, and therefore works
If supported for the target machine, emit position-independent code,
suitable for dynamic linking and avoiding any limit on the size of the
global offset table. This option makes a difference on the m68k, m88k,
-and the Sparc.
+and the SPARC.
Position-independent code requires special support, and therefore works
only on certain machines.
@findex next_cc0_user
On some machines, the type of branch instruction generated may depend on
the way the condition code was produced; for example, on the 68k and
-Sparc, setting the condition code directly from an add or subtract
+SPARC, setting the condition code directly from an add or subtract
instruction does not clear the overflow bit the way that a test
instruction does, so a different branch instruction must be used for
some conditional branches. For machines that use @code{(cc0)}, the set
Registers used to store the condition code value should have a mode that
is in class @code{MODE_CC}. Normally, it will be @code{CCmode}. If
additional modes are required (as for the add example mentioned above in
-the Sparc), define the macro @code{EXTRA_CC_MODES} to list the
+the SPARC), define the macro @code{EXTRA_CC_MODES} to list the
additional modes required (@pxref{Condition Code}). Also define
@code{SELECT_CC_MODE} to choose a mode given an operand of a compare.
If the cases that require different modes would be made by instruction
combination, the macro @code{SELECT_CC_MODE} determines which machine
mode should be used for the comparison result. The patterns should be
-written using that mode. To support the case of the add on the Sparc
+written using that mode. To support the case of the add on the SPARC
discussed above, we have the pattern
@smallexample
"@dots{}")
@end smallexample
-The @code{SELECT_CC_MODE} macro on the Sparc returns @code{CC_NOOVmode}
+The @code{SELECT_CC_MODE} macro on the SPARC returns @code{CC_NOOVmode}
for comparisons whose argument is a @code{plus}.
@node Looping Patterns
condition code. Other machines store condition codes in general
registers; in such cases a pseudo register should be used.
-Some machines, such as the Sparc and RS/6000, have two sets of
+Some machines, such as the SPARC and RS/6000, have two sets of
arithmetic instructions, one that sets and one that does not set the
condition code. This is best handled by normally generating the
instruction that does not set the condition code, and making a pattern
from general registers, but not memory. Some machines allow copying all
registers to and from memory, but require a scratch register for stores
to some memory locations (e.g., those with symbolic address on the RT,
-and those with certain symbolic address on the Sparc when compiling
+and those with certain symbolic address on the SPARC when compiling
PIC)@. In some cases, both an intermediate and a scratch register are
required.
@item SETUP_FRAME_ADDRESSES
If defined, a C expression that produces the machine-specific code to
setup the stack so that arbitrary frames can be accessed. For example,
-on the Sparc, we must flush all of the register windows to the stack
+on the SPARC, we must flush all of the register windows to the stack
before we can access arbitrary stack frames. You will seldom need to
define this macro.
@item SELECT_CC_MODE (@var{op}, @var{x}, @var{y})
Returns a mode from class @code{MODE_CC} to be used when comparison
operation code @var{op} is applied to rtx @var{x} and @var{y}. For
-example, on the Sparc, @code{SELECT_CC_MODE} is defined as (see
+example, on the SPARC, @code{SELECT_CC_MODE} is defined as (see
@pxref{Jump Patterns} for a description of the reason for this
definition)
You need not define this macro if it would always returns zero or if the
floating-point format is anything other than @code{IEEE_FLOAT_FORMAT}.
-For example, here is the definition used on the Sparc, where floating-point
+For example, here is the definition used on the SPARC, where floating-point
inequality comparisons are always given @code{CCFPEmode}:
@smallexample
You must specify all three options explicitly.
@item
-On a Sparc, GCC aligns all values of type @code{double} on an 8-byte
+On a SPARC, GCC aligns all values of type @code{double} on an 8-byte
boundary, and it expects every @code{double} to be so aligned. The Sun
compiler usually gives @code{double} values 8-byte alignment, with one
exception: function arguments of type @code{double} may not be aligned.
@item
On Solaris, the @code{malloc} function in the @file{libmalloc.a} library
may allocate memory that is only 4 byte aligned. Since GCC on the
-Sparc assumes that doubles are 8 byte aligned, this may result in a
+SPARC assumes that doubles are 8 byte aligned, this may result in a
fatal signal if doubles are stored in memory allocated by the
@file{libmalloc.a} library.
@file{mit/util/misc/dlsym.c} from the MIT version of X windows.
@item
-The 128-bit long double format that the Sparc port supports currently
+The 128-bit long double format that the SPARC port supports currently
works by using the architecturally defined quad-word floating point
instructions. Since there is no hardware that supports these
instructions they must be emulated by the operating system. Long
The generation of DWARF debugging information by the GNU version 2.x C
compiler has now been tested rather extensively for m88k, i386, i860, and
- Sparc targets. The DWARF output of the GNU C compiler appears to inter-
+ SPARC targets. The DWARF output of the GNU C compiler appears to inter-
operate well with the standard SVR4 SDB debugger on these kinds of target
systems (but of course, there are no guarantees).
#define DBL_DIG __DBL_DIG__
#define LDBL_DIG __LDBL_DIG__
-/* Minimum int x such that FLT_RADIX**(x-1) is a normalised float, emin */
+/* Minimum int x such that FLT_RADIX**(x-1) is a normalized float, emin */
#undef FLT_MIN_EXP
#undef DBL_MIN_EXP
#undef LDBL_MIN_EXP
}
/* See if anything that happened changes which eliminations are valid.
- For example, on the Sparc, whether or not the frame pointer can
+ For example, on the SPARC, whether or not the frame pointer can
be eliminated can depend on what registers have been used. We need
not check some conditions again (such as flag_omit_frame_pointer)
since they can't have changed. */
/* ??? We do allow it if the current REG is not valid for
its mode. This is a kludge to work around how float/complex
- arguments are passed on 32-bit Sparc and should be fixed. */
+ arguments are passed on 32-bit SPARC and should be fixed. */
if (HARD_REGNO_MODE_OK (final_regno, outermode)
|| ! HARD_REGNO_MODE_OK (REGNO (op), innermode))
{
@{ - used to start the statements in a function
@} - used to end the statements in a function
( - start list of function arguments, or to change the precedence of operators in an expression
-) - end list or prioritised operators in expression
+) - end list or prioritized operators in expression
, - used to separate parameters in a function prototype or in a function call
; - used to end a statement
+ - addition
}
/* ??? There appear to be bugs in integrate.c wrt __builtin_longjmp and
- virtual-stack-vars. An inline version of this segfaults on Sparc. */
+ virtual-stack-vars. An inline version of this segfaults on SPARC. */
#define uw_install_context(CURRENT, TARGET) \
do \
{ \
projects / gcc.git / commitdiff