: segment->p_vaddr != section->vma) \
|| (strcmp (bfd_get_section_name (ibfd, section), ".dynamic") \
== 0)) \
- && !section->segment_mark)
+ && (segment->p_type != PT_LOAD || !section->segment_mark))
/* If the output section of a section in the input segment is NULL,
it is removed from the corresponding output segment. */
asection **sections;
asection *output_section;
unsigned int isec;
- bfd_vma matching_lma;
- bfd_vma suggested_lma;
+ asection *matching_lma;
+ asection *suggested_lma;
unsigned int j;
bfd_size_type amt;
asection *first_section;
- bfd_boolean first_matching_lma;
- bfd_boolean first_suggested_lma;
if (segment->p_type == PT_NULL)
continue;
we have completely filled the segment, and there is nothing
more to do. */
isec = 0;
- matching_lma = 0;
- suggested_lma = 0;
- first_matching_lma = TRUE;
- first_suggested_lma = TRUE;
+ matching_lma = NULL;
+ suggested_lma = NULL;
for (section = first_section, j = 0;
section != NULL;
&& !bed->want_p_paddr_set_to_zero
&& isec == 0
&& output_section->lma != 0
- && output_section->vma == (segment->p_vaddr
- + (map->includes_filehdr
- ? iehdr->e_ehsize
- : 0)
- + (map->includes_phdrs
- ? (iehdr->e_phnum
- * iehdr->e_phentsize)
- : 0)))
+ && (align_power (segment->p_vaddr
+ + (map->includes_filehdr
+ ? iehdr->e_ehsize : 0)
+ + (map->includes_phdrs
+ ? iehdr->e_phnum * iehdr->e_phentsize
+ : 0),
+ output_section->alignment_power)
+ == output_section->vma))
map->p_paddr = segment->p_vaddr;
/* Match up the physical address of the segment with the
|| (bed->want_p_paddr_set_to_zero
&& IS_CONTAINED_BY_VMA (output_section, segment)))
{
- if (first_matching_lma || output_section->lma < matching_lma)
- {
- matching_lma = output_section->lma;
- first_matching_lma = FALSE;
- }
+ if (matching_lma == NULL
+ || output_section->lma < matching_lma->lma)
+ matching_lma = output_section;
/* We assume that if the section fits within the segment
then it does not overlap any other section within that
segment. */
map->sections[isec++] = output_section;
}
- else if (first_suggested_lma)
- {
- suggested_lma = output_section->lma;
- first_suggested_lma = FALSE;
- }
+ else if (suggested_lma == NULL)
+ suggested_lma = output_section;
if (j == section_count)
break;
if (p_paddr_valid
&& !bed->want_p_paddr_set_to_zero
- && matching_lma != map->p_paddr
+ && matching_lma->lma != map->p_paddr
&& !map->includes_filehdr
&& !map->includes_phdrs)
/* There is some padding before the first section in the
segment. So, we must account for that in the output
segment's vma. */
- map->p_vaddr_offset = matching_lma - map->p_paddr;
+ map->p_vaddr_offset = matching_lma->lma - map->p_paddr;
free (sections);
continue;
}
else
{
- if (!first_matching_lma)
- {
- /* At least one section fits inside the current segment.
- Keep it, but modify its physical address to match the
- LMA of the first section that fitted. */
- map->p_paddr = matching_lma;
- }
- else
- {
- /* None of the sections fitted inside the current segment.
- Change the current segment's physical address to match
- the LMA of the first section. */
- map->p_paddr = suggested_lma;
- }
+ /* Change the current segment's physical address to match
+ the LMA of the first section that fitted, or if no
+ section fitted, the first section. */
+ if (matching_lma == NULL)
+ matching_lma = suggested_lma;
+
+ map->p_paddr = matching_lma->lma;
/* Offset the segment physical address from the lma
to allow for space taken up by elf headers. */
- if (map->includes_filehdr)
+ if (map->includes_phdrs)
{
- if (map->p_paddr >= iehdr->e_ehsize)
- map->p_paddr -= iehdr->e_ehsize;
- else
- {
- map->includes_filehdr = FALSE;
- map->includes_phdrs = FALSE;
- }
+ map->p_paddr -= iehdr->e_phnum * iehdr->e_phentsize;
+
+ /* iehdr->e_phnum is just an estimate of the number
+ of program headers that we will need. Make a note
+ here of the number we used and the segment we chose
+ to hold these headers, so that we can adjust the
+ offset when we know the correct value. */
+ phdr_adjust_num = iehdr->e_phnum;
+ phdr_adjust_seg = map;
}
- if (map->includes_phdrs)
+ if (map->includes_filehdr)
{
- if (map->p_paddr >= iehdr->e_phnum * iehdr->e_phentsize)
- {
- map->p_paddr -= iehdr->e_phnum * iehdr->e_phentsize;
-
- /* iehdr->e_phnum is just an estimate of the number
- of program headers that we will need. Make a note
- here of the number we used and the segment we chose
- to hold these headers, so that we can adjust the
- offset when we know the correct value. */
- phdr_adjust_num = iehdr->e_phnum;
- phdr_adjust_seg = map;
- }
- else
- map->includes_phdrs = FALSE;
+ bfd_vma align = (bfd_vma) 1 << matching_lma->alignment_power;
+ map->p_paddr -= iehdr->e_ehsize;
+ /* We've subtracted off the size of headers from the
+ first section lma, but there may have been some
+ alignment padding before that section too. Try to
+ account for that by adjusting the segment lma down to
+ the same alignment. */
+ if (segment->p_align != 0 && segment->p_align < align)
+ align = segment->p_align;
+ map->p_paddr &= -align;
}
}
do
{
map->count = 0;
- suggested_lma = 0;
- first_suggested_lma = TRUE;
+ suggested_lma = NULL;
/* Fill the current segment with sections that fit. */
for (j = 0; j < section_count; j++)
/* If the first section in a segment does not start at
the beginning of the segment, then something is
wrong. */
- if (output_section->lma
- != (map->p_paddr
- + (map->includes_filehdr ? iehdr->e_ehsize : 0)
- + (map->includes_phdrs
- ? iehdr->e_phnum * iehdr->e_phentsize
- : 0)))
+ if (align_power (map->p_paddr
+ + (map->includes_filehdr
+ ? iehdr->e_ehsize : 0)
+ + (map->includes_phdrs
+ ? iehdr->e_phnum * iehdr->e_phentsize
+ : 0),
+ output_section->alignment_power)
+ != output_section->lma)
abort ();
}
else
|| (prev_sec->lma + prev_sec->size
> output_section->lma))
{
- if (first_suggested_lma)
- {
- suggested_lma = output_section->lma;
- first_suggested_lma = FALSE;
- }
+ if (suggested_lma == NULL)
+ suggested_lma = output_section;
continue;
}
map->sections[map->count++] = output_section;
++isec;
sections[j] = NULL;
- section->segment_mark = TRUE;
- }
- else if (first_suggested_lma)
- {
- suggested_lma = output_section->lma;
- first_suggested_lma = FALSE;
+ if (segment->p_type == PT_LOAD)
+ section->segment_mark = TRUE;
}
+ else if (suggested_lma == NULL)
+ suggested_lma = output_section;
}
BFD_ASSERT (map->count > 0);
map->p_type = segment->p_type;
map->p_flags = segment->p_flags;
map->p_flags_valid = 1;
- map->p_paddr = suggested_lma;
+ map->p_paddr = suggested_lma->lma;
map->p_paddr_valid = p_paddr_valid;
map->includes_filehdr = 0;
map->includes_phdrs = 0;
if (count > phdr_adjust_num)
phdr_adjust_seg->p_paddr
-= (count - phdr_adjust_num) * iehdr->e_phentsize;
+
+ for (map = map_first; map != NULL; map = map->next)
+ if (map->p_type == PT_PHDR)
+ {
+ bfd_vma adjust
+ = phdr_adjust_seg->includes_filehdr ? iehdr->e_ehsize : 0;
+ map->p_paddr = phdr_adjust_seg->p_paddr + adjust;
+ break;
+ }
}
#undef SEGMENT_END
projects / binutils-gdb.git / commitdiff