--- /dev/null
+from migen import *
+from migen.bank.description import *
+
+from misoc.mem.sdram.phy import dfi
+
+
+class PhaseInjector(Module, AutoCSR):
+ def __init__(self, phase):
+ self._command = CSRStorage(6) # cs, we, cas, ras, wren, rden
+ self._command_issue = CSR()
+ self._address = CSRStorage(flen(phase.address))
+ self._baddress = CSRStorage(flen(phase.bank))
+ self._wrdata = CSRStorage(flen(phase.wrdata))
+ self._rddata = CSRStatus(flen(phase.rddata))
+
+ ###
+
+ self.comb += [
+ If(self._command_issue.re,
+ phase.cs_n.eq(~self._command.storage[0]),
+ phase.we_n.eq(~self._command.storage[1]),
+ phase.cas_n.eq(~self._command.storage[2]),
+ phase.ras_n.eq(~self._command.storage[3])
+ ).Else(
+ phase.cs_n.eq(1),
+ phase.we_n.eq(1),
+ phase.cas_n.eq(1),
+ phase.ras_n.eq(1)
+ ),
+ phase.address.eq(self._address.storage),
+ phase.bank.eq(self._baddress.storage),
+ phase.wrdata_en.eq(self._command_issue.re & self._command.storage[4]),
+ phase.rddata_en.eq(self._command_issue.re & self._command.storage[5]),
+ phase.wrdata.eq(self._wrdata.storage),
+ phase.wrdata_mask.eq(0)
+ ]
+ self.sync += If(phase.rddata_valid, self._rddata.status.eq(phase.rddata))
+
+
+class DFIInjector(Module, AutoCSR):
+ def __init__(self, addressbits, bankbits, databits, nphases=1):
+ inti = dfi.Interface(addressbits, bankbits, databits, nphases)
+ self.slave = dfi.Interface(addressbits, bankbits, databits, nphases)
+ self.master = dfi.Interface(addressbits, bankbits, databits, nphases)
+
+ self._control = CSRStorage(4) # sel, cke, odt, reset_n
+
+ for n, phase in enumerate(inti.phases):
+ setattr(self.submodules, "pi" + str(n), PhaseInjector(phase))
+
+ ###
+
+ self.comb += If(self._control.storage[0],
+ self.slave.connect(self.master)
+ ).Else(
+ inti.connect(self.master)
+ )
+ self.comb += [phase.cke.eq(self._control.storage[1]) for phase in inti.phases]
+ self.comb += [phase.odt.eq(self._control.storage[2]) for phase in inti.phases if hasattr(phase, "odt")]
+ self.comb += [phase.reset_n.eq(self._control.storage[3]) for phase in inti.phases if hasattr(phase, "reset_n")]
--- /dev/null
+from misoc.dvisampler.core import DVISampler
--- /dev/null
+from migen import *
+from migen.genlib.cdc import MultiReg, PulseSynchronizer
+from migen.genlib.fifo import AsyncFIFO
+from migen.genlib.record import Record
+from migen.bank.description import *
+from migen.flow.actor import *
+
+from misoc.dvisampler.common import channel_layout
+
+
+class SyncPolarity(Module):
+ def __init__(self):
+ self.valid_i = Signal()
+ self.data_in0 = Record(channel_layout)
+ self.data_in1 = Record(channel_layout)
+ self.data_in2 = Record(channel_layout)
+
+ self.valid_o = Signal()
+ self.de = Signal()
+ self.hsync = Signal()
+ self.vsync = Signal()
+ self.r = Signal(8)
+ self.g = Signal(8)
+ self.b = Signal(8)
+
+ ###
+
+ de = self.data_in0.de
+ de_r = Signal()
+ c = self.data_in0.c
+ c_polarity = Signal(2)
+ c_out = Signal(2)
+
+ self.comb += [
+ self.de.eq(de_r),
+ self.hsync.eq(c_out[0]),
+ self.vsync.eq(c_out[1])
+ ]
+
+ self.sync.pix += [
+ self.valid_o.eq(self.valid_i),
+ self.r.eq(self.data_in2.d),
+ self.g.eq(self.data_in1.d),
+ self.b.eq(self.data_in0.d),
+
+ de_r.eq(de),
+ If(de_r & ~de,
+ c_polarity.eq(c),
+ c_out.eq(0)
+ ).Else(
+ c_out.eq(c ^ c_polarity)
+ )
+ ]
+
+
+class ResolutionDetection(Module, AutoCSR):
+ def __init__(self, nbits=11):
+ self.valid_i = Signal()
+ self.vsync = Signal()
+ self.de = Signal()
+
+ self._hres = CSRStatus(nbits)
+ self._vres = CSRStatus(nbits)
+
+ ###
+
+ # Detect DE transitions
+ de_r = Signal()
+ pn_de = Signal()
+ self.sync.pix += de_r.eq(self.de)
+ self.comb += pn_de.eq(~self.de & de_r)
+
+ # HRES
+ hcounter = Signal(nbits)
+ self.sync.pix += If(self.valid_i & self.de,
+ hcounter.eq(hcounter + 1)
+ ).Else(
+ hcounter.eq(0)
+ )
+
+ hcounter_st = Signal(nbits)
+ self.sync.pix += If(self.valid_i,
+ If(pn_de, hcounter_st.eq(hcounter))
+ ).Else(
+ hcounter_st.eq(0)
+ )
+ self.specials += MultiReg(hcounter_st, self._hres.status)
+
+ # VRES
+ vsync_r = Signal()
+ p_vsync = Signal()
+ self.sync.pix += vsync_r.eq(self.vsync),
+ self.comb += p_vsync.eq(self.vsync & ~vsync_r)
+
+ vcounter = Signal(nbits)
+ self.sync.pix += If(self.valid_i & p_vsync,
+ vcounter.eq(0)
+ ).Elif(pn_de,
+ vcounter.eq(vcounter + 1)
+ )
+
+ vcounter_st = Signal(nbits)
+ self.sync.pix += If(self.valid_i,
+ If(p_vsync, vcounter_st.eq(vcounter))
+ ).Else(
+ vcounter_st.eq(0)
+ )
+ self.specials += MultiReg(vcounter_st, self._vres.status)
+
+
+class FrameExtraction(Module, AutoCSR):
+ def __init__(self, word_width, fifo_depth):
+ # in pix clock domain
+ self.valid_i = Signal()
+ self.vsync = Signal()
+ self.de = Signal()
+ self.r = Signal(8)
+ self.g = Signal(8)
+ self.b = Signal(8)
+
+ # in sys clock domain
+ word_layout = [("sof", 1), ("pixels", word_width)]
+ self.frame = Source(word_layout)
+ self.busy = Signal()
+
+ self._overflow = CSR()
+
+ ###
+
+ # start of frame detection
+ vsync_r = Signal()
+ new_frame = Signal()
+ self.comb += new_frame.eq(self.vsync & ~vsync_r)
+ self.sync.pix += vsync_r.eq(self.vsync)
+
+ # pack pixels into words
+ cur_word = Signal(word_width)
+ cur_word_valid = Signal()
+ encoded_pixel = Signal(24)
+ self.comb += encoded_pixel.eq(Cat(self.b, self.g, self.r))
+ pack_factor = word_width//24
+ assert(pack_factor & (pack_factor - 1) == 0) # only support powers of 2
+ pack_counter = Signal(max=pack_factor)
+ self.sync.pix += [
+ cur_word_valid.eq(0),
+ If(new_frame,
+ cur_word_valid.eq(pack_counter == (pack_factor - 1)),
+ pack_counter.eq(0),
+ ).Elif(self.valid_i & self.de,
+ [If(pack_counter == (pack_factor-i-1),
+ cur_word[24*i:24*(i+1)].eq(encoded_pixel)) for i in range(pack_factor)],
+ cur_word_valid.eq(pack_counter == (pack_factor - 1)),
+ pack_counter.eq(pack_counter + 1)
+ )
+ ]
+
+ # FIFO
+ fifo = RenameClockDomains(AsyncFIFO(word_layout, fifo_depth),
+ {"write": "pix", "read": "sys"})
+ self.submodules += fifo
+ self.comb += [
+ fifo.din.pixels.eq(cur_word),
+ fifo.we.eq(cur_word_valid)
+ ]
+ self.sync.pix += \
+ If(new_frame,
+ fifo.din.sof.eq(1)
+ ).Elif(cur_word_valid,
+ fifo.din.sof.eq(0)
+ )
+ self.comb += [
+ self.frame.stb.eq(fifo.readable),
+ self.frame.payload.eq(fifo.dout),
+ fifo.re.eq(self.frame.ack),
+ self.busy.eq(0)
+ ]
+
+ # overflow detection
+ pix_overflow = Signal()
+ pix_overflow_reset = Signal()
+ self.sync.pix += [
+ If(fifo.we & ~fifo.writable,
+ pix_overflow.eq(1)
+ ).Elif(pix_overflow_reset,
+ pix_overflow.eq(0)
+ )
+ ]
+
+ sys_overflow = Signal()
+ self.specials += MultiReg(pix_overflow, sys_overflow)
+ self.submodules.overflow_reset = PulseSynchronizer("sys", "pix")
+ self.submodules.overflow_reset_ack = PulseSynchronizer("pix", "sys")
+ self.comb += [
+ pix_overflow_reset.eq(self.overflow_reset.o),
+ self.overflow_reset_ack.i.eq(pix_overflow_reset)
+ ]
+
+ overflow_mask = Signal()
+ self.comb += [
+ self._overflow.w.eq(sys_overflow & ~overflow_mask),
+ self.overflow_reset.i.eq(self._overflow.re)
+ ]
+ self.sync += \
+ If(self._overflow.re,
+ overflow_mask.eq(1)
+ ).Elif(self.overflow_reset_ack.o,
+ overflow_mask.eq(0)
+ )
--- /dev/null
+from migen import *
+from migen.genlib.cdc import MultiReg
+from migen.genlib.fifo import _inc
+from migen.genlib.record import Record, layout_len
+from migen.genlib.misc import optree
+from migen.bank.description import *
+
+from misoc.dvisampler.common import channel_layout
+
+
+class _SyncBuffer(Module):
+ def __init__(self, width, depth):
+ self.din = Signal(width)
+ self.dout = Signal(width)
+ self.re = Signal()
+
+ ###
+
+ produce = Signal(max=depth)
+ consume = Signal(max=depth)
+ storage = Memory(width, depth)
+ self.specials += storage
+
+ wrport = storage.get_port(write_capable=True)
+ self.specials += wrport
+ self.comb += [
+ wrport.adr.eq(produce),
+ wrport.dat_w.eq(self.din),
+ wrport.we.eq(1)
+ ]
+ self.sync += _inc(produce, depth)
+
+ rdport = storage.get_port(async_read=True)
+ self.specials += rdport
+ self.comb += [
+ rdport.adr.eq(consume),
+ self.dout.eq(rdport.dat_r)
+ ]
+ self.sync += If(self.re, _inc(consume, depth))
+
+
+class ChanSync(Module, AutoCSR):
+ def __init__(self, nchan=3, depth=8):
+ self.valid_i = Signal()
+ self.chan_synced = Signal()
+
+ self._channels_synced = CSRStatus()
+
+ lst_control = []
+ all_control = Signal()
+ for i in range(nchan):
+ name = "data_in" + str(i)
+ data_in = Record(channel_layout, name=name)
+ setattr(self, name, data_in)
+ name = "data_out" + str(i)
+ data_out = Record(channel_layout, name=name)
+ setattr(self, name, data_out)
+
+ ###
+
+ syncbuffer = RenameClockDomains(_SyncBuffer(layout_len(channel_layout), depth), "pix")
+ self.submodules += syncbuffer
+ self.comb += [
+ syncbuffer.din.eq(data_in.raw_bits()),
+ data_out.raw_bits().eq(syncbuffer.dout)
+ ]
+ is_control = Signal()
+ self.comb += [
+ is_control.eq(~data_out.de),
+ syncbuffer.re.eq(~is_control | all_control)
+ ]
+ lst_control.append(is_control)
+
+ some_control = Signal()
+ self.comb += [
+ all_control.eq(optree("&", lst_control)),
+ some_control.eq(optree("|", lst_control))
+ ]
+ self.sync.pix += If(~self.valid_i,
+ self.chan_synced.eq(0)
+ ).Else(
+ If(some_control,
+ If(all_control,
+ self.chan_synced.eq(1)
+ ).Else(
+ self.chan_synced.eq(0)
+ )
+ )
+ )
+ self.specials += MultiReg(self.chan_synced, self._channels_synced.status)
+
+
+class _TB(Module):
+ def __init__(self, test_seq_it):
+ self.test_seq_it = test_seq_it
+
+ self.submodules.chansync = RenameClockDomains(ChanSync(), {"pix": "sys"})
+ self.comb += self.chansync.valid_i.eq(1)
+
+ def do_simulation(self, selfp):
+ try:
+ de0, de1, de2 = next(self.test_seq_it)
+ except StopIteration:
+ raise StopSimulation
+
+ selfp.chansync.data_in0.de = de0
+ selfp.chansync.data_in1.de = de1
+ selfp.chansync.data_in2.de = de2
+ selfp.chansync.data_in0.d = selfp.simulator.cycle_counter
+ selfp.chansync.data_in1.d = selfp.simulator.cycle_counter
+ selfp.chansync.data_in2.d = selfp.simulator.cycle_counter
+
+ out0 = selfp.chansync.data_out0.d
+ out1 = selfp.chansync.data_out1.d
+ out2 = selfp.chansync.data_out2.d
+
+ print("{0:5} {1:5} {2:5}".format(out0, out1, out2))
+
+if __name__ == "__main__":
+ from migen.sim.generic import run_simulation
+
+ test_seq = [
+ (1, 1, 1),
+ (1, 1, 0),
+ (0, 0, 0),
+ (0, 0, 0),
+ (0, 0, 1),
+ (1, 1, 1),
+ (1, 1, 1),
+ ]
+ tb = _TB(iter(test_seq*2))
+ run_simulation(tb)
--- /dev/null
+from migen import *
+from migen.genlib.cdc import MultiReg
+from migen.genlib.misc import optree
+from migen.bank.description import *
+
+from misoc.dvisampler.common import control_tokens
+
+
+class CharSync(Module, AutoCSR):
+ def __init__(self, required_controls=8):
+ self.raw_data = Signal(10)
+ self.synced = Signal()
+ self.data = Signal(10)
+
+ self._char_synced = CSRStatus()
+ self._ctl_pos = CSRStatus(bits_for(9))
+
+ ###
+
+ raw_data1 = Signal(10)
+ self.sync.pix += raw_data1.eq(self.raw_data)
+ raw = Signal(20)
+ self.comb += raw.eq(Cat(raw_data1, self.raw_data))
+
+ found_control = Signal()
+ control_position = Signal(max=10)
+ self.sync.pix += found_control.eq(0)
+ for i in range(10):
+ self.sync.pix += If(optree("|", [raw[i:i+10] == t for t in control_tokens]),
+ found_control.eq(1),
+ control_position.eq(i)
+ )
+
+ control_counter = Signal(max=required_controls)
+ previous_control_position = Signal(max=10)
+ word_sel = Signal(max=10)
+ self.sync.pix += [
+ If(found_control & (control_position == previous_control_position),
+ If(control_counter == (required_controls - 1),
+ control_counter.eq(0),
+ self.synced.eq(1),
+ word_sel.eq(control_position)
+ ).Else(
+ control_counter.eq(control_counter + 1)
+ )
+ ).Else(
+ control_counter.eq(0)
+ ),
+ previous_control_position.eq(control_position)
+ ]
+ self.specials += MultiReg(self.synced, self._char_synced.status)
+ self.specials += MultiReg(word_sel, self._ctl_pos.status)
+
+ self.sync.pix += self.data.eq(raw >> word_sel)
--- /dev/null
+from migen import *
+from migen.genlib.cdc import MultiReg
+from migen.bank.description import *
+
+
+class Clocking(Module, AutoCSR):
+ def __init__(self, pads):
+ self._pll_reset = CSRStorage(reset=1)
+ self._locked = CSRStatus()
+
+ # DRP
+ self._pll_adr = CSRStorage(5)
+ self._pll_dat_r = CSRStatus(16)
+ self._pll_dat_w = CSRStorage(16)
+ self._pll_read = CSR()
+ self._pll_write = CSR()
+ self._pll_drdy = CSRStatus()
+
+ self.locked = Signal()
+ self.serdesstrobe = Signal()
+ self.clock_domains._cd_pix = ClockDomain()
+ self.clock_domains._cd_pix2x = ClockDomain()
+ self.clock_domains._cd_pix10x = ClockDomain(reset_less=True)
+
+ ###
+
+ clk_se = Signal()
+ self.specials += Instance("IBUFDS", i_I=pads.clk_p, i_IB=pads.clk_n, o_O=clk_se)
+
+ clkfbout = Signal()
+ pll_locked = Signal()
+ pll_clk0 = Signal()
+ pll_clk1 = Signal()
+ pll_clk2 = Signal()
+ pll_drdy = Signal()
+ self.sync += If(self._pll_read.re | self._pll_write.re,
+ self._pll_drdy.status.eq(0)
+ ).Elif(pll_drdy,
+ self._pll_drdy.status.eq(1)
+ )
+ self.specials += Instance("PLL_ADV",
+ p_CLKFBOUT_MULT=10,
+ p_CLKOUT0_DIVIDE=1, # pix10x
+ p_CLKOUT1_DIVIDE=5, # pix2x
+ p_CLKOUT2_DIVIDE=10, # pix
+ p_COMPENSATION="INTERNAL",
+
+ i_CLKINSEL=1,
+ i_CLKIN1=clk_se,
+ o_CLKOUT0=pll_clk0, o_CLKOUT1=pll_clk1, o_CLKOUT2=pll_clk2,
+ o_CLKFBOUT=clkfbout, i_CLKFBIN=clkfbout,
+ o_LOCKED=pll_locked, i_RST=self._pll_reset.storage,
+
+ i_DADDR=self._pll_adr.storage,
+ o_DO=self._pll_dat_r.status,
+ i_DI=self._pll_dat_w.storage,
+ i_DEN=self._pll_read.re | self._pll_write.re,
+ i_DWE=self._pll_write.re,
+ o_DRDY=pll_drdy,
+ i_DCLK=ClockSignal())
+
+ locked_async = Signal()
+ self.specials += [
+ Instance("BUFPLL", p_DIVIDE=5,
+ i_PLLIN=pll_clk0, i_GCLK=ClockSignal("pix2x"), i_LOCKED=pll_locked,
+ o_IOCLK=self._cd_pix10x.clk, o_LOCK=locked_async, o_SERDESSTROBE=self.serdesstrobe),
+ Instance("BUFG", i_I=pll_clk1, o_O=self._cd_pix2x.clk),
+ Instance("BUFG", i_I=pll_clk2, o_O=self._cd_pix.clk),
+ MultiReg(locked_async, self.locked, "sys")
+ ]
+ self.comb += self._locked.status.eq(self.locked)
+
+ # sychronize pix+pix2x reset
+ pix_rst_n = 1
+ for i in range(2):
+ new_pix_rst_n = Signal()
+ self.specials += Instance("FDCE", i_D=pix_rst_n, i_CE=1, i_C=ClockSignal("pix"),
+ i_CLR=~locked_async, o_Q=new_pix_rst_n)
+ pix_rst_n = new_pix_rst_n
+ self.comb += self._cd_pix.rst.eq(~pix_rst_n), self._cd_pix2x.rst.eq(~pix_rst_n)
--- /dev/null
+control_tokens = [0b1101010100, 0b0010101011, 0b0101010100, 0b1010101011]
+channel_layout = [("d", 8), ("c", 2), ("de", 1)]
--- /dev/null
+from migen import *
+from migen.bank.description import AutoCSR
+
+from misoc.dvisampler.edid import EDID
+from misoc.dvisampler.clocking import Clocking
+from misoc.dvisampler.datacapture import DataCapture
+from misoc.dvisampler.charsync import CharSync
+from misoc.dvisampler.wer import WER
+from misoc.dvisampler.decoding import Decoding
+from misoc.dvisampler.chansync import ChanSync
+from misoc.dvisampler.analysis import SyncPolarity, ResolutionDetection, FrameExtraction
+from misoc.dvisampler.dma import DMA
+
+
+class DVISampler(Module, AutoCSR):
+ def __init__(self, pads, lasmim, n_dma_slots=2, fifo_depth=512):
+ self.submodules.edid = EDID(pads)
+ self.submodules.clocking = Clocking(pads)
+
+ for datan in range(3):
+ name = "data" + str(datan)
+
+ cap = DataCapture(getattr(pads, name + "_p"), getattr(pads, name + "_n"), 8)
+ setattr(self.submodules, name + "_cap", cap)
+ self.comb += cap.serdesstrobe.eq(self.clocking.serdesstrobe)
+
+ charsync = CharSync()
+ setattr(self.submodules, name + "_charsync", charsync)
+ self.comb += charsync.raw_data.eq(cap.d)
+
+ wer = WER()
+ setattr(self.submodules, name + "_wer", wer)
+ self.comb += wer.data.eq(charsync.data)
+
+ decoding = Decoding()
+ setattr(self.submodules, name + "_decod", decoding)
+ self.comb += [
+ decoding.valid_i.eq(charsync.synced),
+ decoding.input.eq(charsync.data)
+ ]
+
+ self.submodules.chansync = ChanSync()
+ self.comb += [
+ self.chansync.valid_i.eq(self.data0_decod.valid_o & \
+ self.data1_decod.valid_o & self.data2_decod.valid_o),
+ self.chansync.data_in0.eq(self.data0_decod.output),
+ self.chansync.data_in1.eq(self.data1_decod.output),
+ self.chansync.data_in2.eq(self.data2_decod.output),
+ ]
+
+ self.submodules.syncpol = SyncPolarity()
+ self.comb += [
+ self.syncpol.valid_i.eq(self.chansync.chan_synced),
+ self.syncpol.data_in0.eq(self.chansync.data_out0),
+ self.syncpol.data_in1.eq(self.chansync.data_out1),
+ self.syncpol.data_in2.eq(self.chansync.data_out2)
+ ]
+
+ self.submodules.resdetection = ResolutionDetection()
+ self.comb += [
+ self.resdetection.valid_i.eq(self.syncpol.valid_o),
+ self.resdetection.de.eq(self.syncpol.de),
+ self.resdetection.vsync.eq(self.syncpol.vsync)
+ ]
+
+ self.submodules.frame = FrameExtraction(24*lasmim.dw//32, fifo_depth)
+ self.comb += [
+ self.frame.valid_i.eq(self.syncpol.valid_o),
+ self.frame.de.eq(self.syncpol.de),
+ self.frame.vsync.eq(self.syncpol.vsync),
+ self.frame.r.eq(self.syncpol.r),
+ self.frame.g.eq(self.syncpol.g),
+ self.frame.b.eq(self.syncpol.b)
+ ]
+
+ self.submodules.dma = DMA(lasmim, n_dma_slots)
+ self.comb += self.frame.frame.connect(self.dma.frame)
+ self.ev = self.dma.ev
+
+ autocsr_exclude = {"ev"}
--- /dev/null
+from migen import *
+from migen.genlib.cdc import MultiReg, PulseSynchronizer
+from migen.bank.description import *
+
+
+class DataCapture(Module, AutoCSR):
+ def __init__(self, pad_p, pad_n, ntbits):
+ self.serdesstrobe = Signal()
+ self.d = Signal(10)
+
+ self._dly_ctl = CSR(6)
+ self._dly_busy = CSRStatus(2)
+ self._phase = CSRStatus(2)
+ self._phase_reset = CSR()
+
+ ###
+
+ # IO
+ pad_se = Signal()
+ self.specials += Instance("IBUFDS", i_I=pad_p, i_IB=pad_n, o_O=pad_se)
+
+ pad_delayed_master = Signal()
+ pad_delayed_slave = Signal()
+ delay_inc = Signal()
+ delay_ce = Signal()
+ delay_master_cal = Signal()
+ delay_master_rst = Signal()
+ delay_master_busy = Signal()
+ delay_slave_cal = Signal()
+ delay_slave_rst = Signal()
+ delay_slave_busy = Signal()
+ self.specials += Instance("IODELAY2",
+ p_SERDES_MODE="MASTER",
+ p_DELAY_SRC="IDATAIN", p_IDELAY_TYPE="DIFF_PHASE_DETECTOR",
+ p_COUNTER_WRAPAROUND="STAY_AT_LIMIT", p_DATA_RATE="SDR",
+
+ i_IDATAIN=pad_se, o_DATAOUT=pad_delayed_master,
+ i_CLK=ClockSignal("pix2x"), i_IOCLK0=ClockSignal("pix10x"),
+
+ i_INC=delay_inc, i_CE=delay_ce,
+ i_CAL=delay_master_cal, i_RST=delay_master_rst, o_BUSY=delay_master_busy,
+ i_T=1)
+ self.specials += Instance("IODELAY2",
+ p_SERDES_MODE="SLAVE",
+ p_DELAY_SRC="IDATAIN", p_IDELAY_TYPE="DIFF_PHASE_DETECTOR",
+ p_COUNTER_WRAPAROUND="WRAPAROUND", p_DATA_RATE="SDR",
+
+ i_IDATAIN=pad_se, o_DATAOUT=pad_delayed_slave,
+ i_CLK=ClockSignal("pix2x"), i_IOCLK0=ClockSignal("pix10x"),
+
+ i_INC=delay_inc, i_CE=delay_ce,
+ i_CAL=delay_slave_cal, i_RST=delay_slave_rst, o_BUSY=delay_slave_busy,
+ i_T=1)
+
+ dsr2 = Signal(5)
+ pd_valid = Signal()
+ pd_incdec = Signal()
+ pd_edge = Signal()
+ pd_cascade = Signal()
+ self.specials += Instance("ISERDES2",
+ p_SERDES_MODE="MASTER",
+ p_BITSLIP_ENABLE="FALSE", p_DATA_RATE="SDR", p_DATA_WIDTH=5,
+ p_INTERFACE_TYPE="RETIMED",
+
+ i_D=pad_delayed_master,
+ o_Q4=dsr2[4], o_Q3=dsr2[3], o_Q2=dsr2[2], o_Q1=dsr2[1],
+
+ i_BITSLIP=0, i_CE0=1, i_RST=0,
+ i_CLK0=ClockSignal("pix10x"), i_CLKDIV=ClockSignal("pix2x"),
+ i_IOCE=self.serdesstrobe,
+
+ o_VALID=pd_valid, o_INCDEC=pd_incdec,
+ i_SHIFTIN=pd_edge, o_SHIFTOUT=pd_cascade)
+ self.specials += Instance("ISERDES2",
+ p_SERDES_MODE="SLAVE",
+ p_BITSLIP_ENABLE="FALSE", p_DATA_RATE="SDR", p_DATA_WIDTH=5,
+ p_INTERFACE_TYPE="RETIMED",
+
+ i_D=pad_delayed_slave,
+ o_Q4=dsr2[0],
+
+ i_BITSLIP=0, i_CE0=1, i_RST=0,
+ i_CLK0=ClockSignal("pix10x"), i_CLKDIV=ClockSignal("pix2x"),
+ i_IOCE=self.serdesstrobe,
+
+ i_SHIFTIN=pd_cascade, o_SHIFTOUT=pd_edge)
+
+ # Phase error accumulator
+ lateness = Signal(ntbits, reset=2**(ntbits - 1))
+ too_late = Signal()
+ too_early = Signal()
+ reset_lateness = Signal()
+ self.comb += [
+ too_late.eq(lateness == (2**ntbits - 1)),
+ too_early.eq(lateness == 0)
+ ]
+ self.sync.pix2x += [
+ If(reset_lateness,
+ lateness.eq(2**(ntbits - 1))
+ ).Elif(~delay_master_busy & ~delay_slave_busy & ~too_late & ~too_early,
+ If(pd_valid & pd_incdec, lateness.eq(lateness - 1)),
+ If(pd_valid & ~pd_incdec, lateness.eq(lateness + 1))
+ )
+ ]
+
+ # Delay control
+ self.submodules.delay_master_done = PulseSynchronizer("pix2x", "sys")
+ delay_master_pending = Signal()
+ self.sync.pix2x += [
+ self.delay_master_done.i.eq(0),
+ If(~delay_master_pending,
+ If(delay_master_cal | delay_ce, delay_master_pending.eq(1))
+ ).Else(
+ If(~delay_master_busy,
+ self.delay_master_done.i.eq(1),
+ delay_master_pending.eq(0)
+ )
+ )
+ ]
+ self.submodules.delay_slave_done = PulseSynchronizer("pix2x", "sys")
+ delay_slave_pending = Signal()
+ self.sync.pix2x += [
+ self.delay_slave_done.i.eq(0),
+ If(~delay_slave_pending,
+ If(delay_slave_cal | delay_ce, delay_slave_pending.eq(1))
+ ).Else(
+ If(~delay_slave_busy,
+ self.delay_slave_done.i.eq(1),
+ delay_slave_pending.eq(0)
+ )
+ )
+ ]
+
+ self.submodules.do_delay_master_cal = PulseSynchronizer("sys", "pix2x")
+ self.submodules.do_delay_master_rst = PulseSynchronizer("sys", "pix2x")
+ self.submodules.do_delay_slave_cal = PulseSynchronizer("sys", "pix2x")
+ self.submodules.do_delay_slave_rst = PulseSynchronizer("sys", "pix2x")
+ self.submodules.do_delay_inc = PulseSynchronizer("sys", "pix2x")
+ self.submodules.do_delay_dec = PulseSynchronizer("sys", "pix2x")
+ self.comb += [
+ delay_master_cal.eq(self.do_delay_master_cal.o),
+ delay_master_rst.eq(self.do_delay_master_rst.o),
+ delay_slave_cal.eq(self.do_delay_slave_cal.o),
+ delay_slave_rst.eq(self.do_delay_slave_rst.o),
+ delay_inc.eq(self.do_delay_inc.o),
+ delay_ce.eq(self.do_delay_inc.o | self.do_delay_dec.o),
+ ]
+
+ sys_delay_master_pending = Signal()
+ self.sync += [
+ If(self.do_delay_master_cal.i | self.do_delay_inc.i | self.do_delay_dec.i,
+ sys_delay_master_pending.eq(1)
+ ).Elif(self.delay_master_done.o,
+ sys_delay_master_pending.eq(0)
+ )
+ ]
+ sys_delay_slave_pending = Signal()
+ self.sync += [
+ If(self.do_delay_slave_cal.i | self.do_delay_inc.i | self.do_delay_dec.i,
+ sys_delay_slave_pending.eq(1)
+ ).Elif(self.delay_slave_done.o,
+ sys_delay_slave_pending.eq(0)
+ )
+ ]
+
+ self.comb += [
+ self.do_delay_master_cal.i.eq(self._dly_ctl.re & self._dly_ctl.r[0]),
+ self.do_delay_master_rst.i.eq(self._dly_ctl.re & self._dly_ctl.r[1]),
+ self.do_delay_slave_cal.i.eq(self._dly_ctl.re & self._dly_ctl.r[2]),
+ self.do_delay_slave_rst.i.eq(self._dly_ctl.re & self._dly_ctl.r[3]),
+ self.do_delay_inc.i.eq(self._dly_ctl.re & self._dly_ctl.r[4]),
+ self.do_delay_dec.i.eq(self._dly_ctl.re & self._dly_ctl.r[5]),
+ self._dly_busy.status.eq(Cat(sys_delay_master_pending, sys_delay_slave_pending))
+ ]
+
+ # Phase detector control
+ self.specials += MultiReg(Cat(too_late, too_early), self._phase.status)
+ self.submodules.do_reset_lateness = PulseSynchronizer("sys", "pix2x")
+ self.comb += [
+ reset_lateness.eq(self.do_reset_lateness.o),
+ self.do_reset_lateness.i.eq(self._phase_reset.re)
+ ]
+
+ # 5:10 deserialization
+ dsr = Signal(10)
+ self.sync.pix2x += dsr.eq(Cat(dsr[5:], dsr2))
+ self.sync.pix += self.d.eq(dsr)
--- /dev/null
+from migen import *
+from migen.genlib.fifo import AsyncFIFO
+from migen.genlib.record import layout_len
+from migen.bank.description import AutoCSR
+from migen.actorlib import structuring, spi
+
+from misoc.mem.sdram.frontend import dma_lasmi
+from misoc.dvisampler.edid import EDID
+from misoc.dvisampler.clocking import Clocking
+from misoc.dvisampler.datacapture import DataCapture
+
+
+class RawDVISampler(Module, AutoCSR):
+ def __init__(self, pads, asmiport):
+ self.submodules.edid = EDID(pads)
+ self.submodules.clocking = Clocking(pads)
+
+ invert = False
+ try:
+ s = getattr(pads, "data0")
+ except AttributeError:
+ s = getattr(pads, "data0_n")
+ invert = True
+ self.submodules.data0_cap = DataCapture(8, invert)
+ self.comb += [
+ self.data0_cap.pad.eq(s),
+ self.data0_cap.serdesstrobe.eq(self.clocking.serdesstrobe)
+ ]
+
+ fifo = RenameClockDomains(AsyncFIFO(10, 256),
+ {"write": "pix", "read": "sys"})
+ self.submodules += fifo
+ self.comb += [
+ fifo.din.eq(self.data0_cap.d),
+ fifo.we.eq(1)
+ ]
+
+ pack_factor = asmiport.hub.dw//16
+ self.submodules.packer = structuring.Pack([("word", 10), ("pad", 6)], pack_factor)
+ self.submodules.cast = structuring.Cast(self.packer.source.payload.layout, asmiport.hub.dw)
+ self.submodules.dma = spi.DMAWriteController(dma_lasmi.Writer(lasmim), spi.MODE_SINGLE_SHOT)
+ self.comb += [
+ self.packer.sink.stb.eq(fifo.readable),
+ fifo.re.eq(self.packer.sink.ack),
+ self.packer.sink.word.eq(fifo.dout),
+ self.packer.source.connect_flat(self.cast.sink),
+ self.cast.source.connect_flat(self.dma.data)
+ ]
--- /dev/null
+from migen import *
+from migen.genlib.record import Record
+
+from misoc.dvisampler.common import control_tokens, channel_layout
+
+
+class Decoding(Module):
+ def __init__(self):
+ self.valid_i = Signal()
+ self.input = Signal(10)
+ self.valid_o = Signal()
+ self.output = Record(channel_layout)
+
+ ###
+
+ self.sync.pix += self.output.de.eq(1)
+ for i, t in enumerate(control_tokens):
+ self.sync.pix += If(self.input == t,
+ self.output.de.eq(0),
+ self.output.c.eq(i)
+ )
+ self.sync.pix += self.output.d[0].eq(self.input[0] ^ self.input[9])
+ for i in range(1, 8):
+ self.sync.pix += self.output.d[i].eq(self.input[i] ^ self.input[i-1] ^ ~self.input[8])
+ self.sync.pix += self.valid_o.eq(self.valid_i)
--- /dev/null
+from migen import *
+from migen.genlib.fsm import FSM, NextState
+from migen.bank.description import *
+from migen.bank.eventmanager import *
+from migen.flow.actor import *
+
+from misoc.mem.sdram.frontend import dma_lasmi
+
+
+# Slot status: EMPTY=0 LOADED=1 PENDING=2
+class _Slot(Module, AutoCSR):
+ def __init__(self, addr_bits, alignment_bits):
+ self.ev_source = EventSourceLevel()
+ self.address = Signal(addr_bits)
+ self.address_reached = Signal(addr_bits)
+ self.address_valid = Signal()
+ self.address_done = Signal()
+
+ self._status = CSRStorage(2, write_from_dev=True)
+ self._address = CSRStorage(addr_bits + alignment_bits, alignment_bits=alignment_bits, write_from_dev=True)
+
+ ###
+
+ self.comb += [
+ self.address.eq(self._address.storage),
+ self.address_valid.eq(self._status.storage[0]),
+ self._status.dat_w.eq(2),
+ self._status.we.eq(self.address_done),
+ self._address.dat_w.eq(self.address_reached),
+ self._address.we.eq(self.address_done),
+ self.ev_source.trigger.eq(self._status.storage[1])
+ ]
+
+
+class _SlotArray(Module, AutoCSR):
+ def __init__(self, nslots, addr_bits, alignment_bits):
+ self.submodules.ev = EventManager()
+ self.address = Signal(addr_bits)
+ self.address_reached = Signal(addr_bits)
+ self.address_valid = Signal()
+ self.address_done = Signal()
+
+ ###
+
+ slots = [_Slot(addr_bits, alignment_bits) for i in range(nslots)]
+ for n, slot in enumerate(slots):
+ setattr(self.submodules, "slot"+str(n), slot)
+ setattr(self.ev, "slot"+str(n), slot.ev_source)
+ self.ev.finalize()
+
+ change_slot = Signal()
+ current_slot = Signal(max=nslots)
+ self.sync += If(change_slot, [If(slot.address_valid, current_slot.eq(n)) for n, slot in reversed(list(enumerate(slots)))])
+ self.comb += change_slot.eq(~self.address_valid | self.address_done)
+
+ self.comb += [
+ self.address.eq(Array(slot.address for slot in slots)[current_slot]),
+ self.address_valid.eq(Array(slot.address_valid for slot in slots)[current_slot])
+ ]
+ self.comb += [slot.address_reached.eq(self.address_reached) for slot in slots]
+ self.comb += [slot.address_done.eq(self.address_done & (current_slot == n)) for n, slot in enumerate(slots)]
+
+
+class DMA(Module):
+ def __init__(self, lasmim, nslots):
+ bus_aw = lasmim.aw
+ bus_dw = lasmim.dw
+ alignment_bits = bits_for(bus_dw//8) - 1
+
+ fifo_word_width = 24*bus_dw//32
+ self.frame = Sink([("sof", 1), ("pixels", fifo_word_width)])
+ self._frame_size = CSRStorage(bus_aw + alignment_bits, alignment_bits=alignment_bits)
+ self.submodules._slot_array = _SlotArray(nslots, bus_aw, alignment_bits)
+ self.ev = self._slot_array.ev
+
+ ###
+
+ # address generator + maximum memory word count to prevent DMA buffer overrun
+ reset_words = Signal()
+ count_word = Signal()
+ last_word = Signal()
+ current_address = Signal(bus_aw)
+ mwords_remaining = Signal(bus_aw)
+ self.comb += [
+ self._slot_array.address_reached.eq(current_address),
+ last_word.eq(mwords_remaining == 1)
+ ]
+ self.sync += [
+ If(reset_words,
+ current_address.eq(self._slot_array.address),
+ mwords_remaining.eq(self._frame_size.storage)
+ ).Elif(count_word,
+ current_address.eq(current_address + 1),
+ mwords_remaining.eq(mwords_remaining - 1)
+ )
+ ]
+
+ # 24bpp -> 32bpp
+ memory_word = Signal(bus_dw)
+ pixbits = []
+ for i in range(bus_dw//32):
+ for j in range(3):
+ b = (i*3+j)*8
+ pixbits.append(self.frame.pixels[b+6:b+8])
+ pixbits.append(self.frame.pixels[b:b+8])
+ pixbits.append(0)
+ pixbits.append(0)
+ self.comb += memory_word.eq(Cat(*pixbits))
+
+ # bus accessor
+ self.submodules._bus_accessor = dma_lasmi.Writer(lasmim)
+ self.comb += [
+ self._bus_accessor.address_data.a.eq(current_address),
+ self._bus_accessor.address_data.d.eq(memory_word)
+ ]
+
+ # control FSM
+ fsm = FSM()
+ self.submodules += fsm
+
+ fsm.act("WAIT_SOF",
+ reset_words.eq(1),
+ self.frame.ack.eq(~self._slot_array.address_valid | ~self.frame.sof),
+ If(self._slot_array.address_valid & self.frame.sof & self.frame.stb, NextState("TRANSFER_PIXELS"))
+ )
+ fsm.act("TRANSFER_PIXELS",
+ self.frame.ack.eq(self._bus_accessor.address_data.ack),
+ If(self.frame.stb,
+ self._bus_accessor.address_data.stb.eq(1),
+ If(self._bus_accessor.address_data.ack,
+ count_word.eq(1),
+ If(last_word, NextState("EOF"))
+ )
+ )
+ )
+ fsm.act("EOF",
+ If(~self._bus_accessor.busy,
+ self._slot_array.address_done.eq(1),
+ NextState("WAIT_SOF")
+ )
+ )
+
+ def get_csrs(self):
+ return [self._frame_size] + self._slot_array.get_csrs()
--- /dev/null
+from migen import *
+from migen.fhdl.specials import Tristate
+from migen.genlib.cdc import MultiReg
+from migen.genlib.fsm import FSM, NextState
+from migen.genlib.misc import chooser
+from migen.bank.description import CSRStorage, CSRStatus, AutoCSR
+
+_default_edid = [
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x3D, 0x17, 0x32, 0x12, 0x2A, 0x6A, 0xBF, 0x00,
+ 0x05, 0x17, 0x01, 0x03, 0x80, 0x28, 0x1E, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x2E, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xB2, 0x0C, 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x18, 0x88,
+ 0x36, 0x00, 0x28, 0x1E, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x4D, 0x31, 0x20,
+ 0x44, 0x56, 0x49, 0x20, 0x6D, 0x69, 0x78, 0x65, 0x72, 0x0A, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x34,
+]
+
+
+class EDID(Module, AutoCSR):
+ def __init__(self, pads, default=_default_edid):
+ self._hpd_notif = CSRStatus()
+ self._hpd_en = CSRStorage()
+ self.specials.mem = Memory(8, 128, init=default)
+
+ ###
+
+ # HPD
+ if hasattr(pads, "hpd_notif"):
+ self.specials += MultiReg(pads.hpd_notif, self._hpd_notif.status)
+ else:
+ self.comb += self._hpd_notif.status.eq(1)
+ if hasattr(pads, "hpd_en"):
+ self.comb += pads.hpd_en.eq(self._hpd_en.storage)
+
+ # EDID
+ scl_raw = Signal()
+ sda_i = Signal()
+ sda_raw = Signal()
+ sda_drv = Signal()
+ _sda_drv_reg = Signal()
+ _sda_i_async = Signal()
+ self.sync += _sda_drv_reg.eq(sda_drv)
+ self.specials += [
+ MultiReg(pads.scl, scl_raw),
+ Tristate(pads.sda, 0, _sda_drv_reg, _sda_i_async),
+ MultiReg(_sda_i_async, sda_raw)
+ ]
+
+ scl_i = Signal()
+ samp_count = Signal(6)
+ samp_carry = Signal()
+ self.sync += [
+ Cat(samp_count, samp_carry).eq(samp_count + 1),
+ If(samp_carry,
+ scl_i.eq(scl_raw),
+ sda_i.eq(sda_raw)
+ )
+ ]
+
+ scl_r = Signal()
+ sda_r = Signal()
+ scl_rising = Signal()
+ sda_rising = Signal()
+ sda_falling = Signal()
+ self.sync += [
+ scl_r.eq(scl_i),
+ sda_r.eq(sda_i)
+ ]
+ self.comb += [
+ scl_rising.eq(scl_i & ~scl_r),
+ sda_rising.eq(sda_i & ~sda_r),
+ sda_falling.eq(~sda_i & sda_r)
+ ]
+
+ start = Signal()
+ self.comb += start.eq(scl_i & sda_falling)
+
+ din = Signal(8)
+ counter = Signal(max=9)
+ self.sync += [
+ If(start, counter.eq(0)),
+ If(scl_rising,
+ If(counter == 8,
+ counter.eq(0)
+ ).Else(
+ counter.eq(counter + 1),
+ din.eq(Cat(sda_i, din[:7]))
+ )
+ )
+ ]
+
+ is_read = Signal()
+ update_is_read = Signal()
+ self.sync += If(update_is_read, is_read.eq(din[0]))
+
+ offset_counter = Signal(max=128)
+ oc_load = Signal()
+ oc_inc = Signal()
+ self.sync += [
+ If(oc_load,
+ offset_counter.eq(din)
+ ).Elif(oc_inc,
+ offset_counter.eq(offset_counter + 1)
+ )
+ ]
+ rdport = self.mem.get_port()
+ self.specials += rdport
+ self.comb += rdport.adr.eq(offset_counter)
+ data_bit = Signal()
+
+ zero_drv = Signal()
+ data_drv = Signal()
+ self.comb += If(zero_drv, sda_drv.eq(1)).Elif(data_drv, sda_drv.eq(~data_bit))
+
+ data_drv_en = Signal()
+ data_drv_stop = Signal()
+ self.sync += If(data_drv_en, data_drv.eq(1)).Elif(data_drv_stop, data_drv.eq(0))
+ self.sync += If(data_drv_en, chooser(rdport.dat_r, counter, data_bit, 8, reverse=True))
+
+ fsm = FSM()
+ self.submodules += fsm
+
+ fsm.act("WAIT_START")
+ fsm.act("RCV_ADDRESS",
+ If(counter == 8,
+ If(din[1:] == 0x50,
+ update_is_read.eq(1),
+ NextState("ACK_ADDRESS0")
+ ).Else(
+ NextState("WAIT_START")
+ )
+ )
+ )
+ fsm.act("ACK_ADDRESS0",
+ If(~scl_i, NextState("ACK_ADDRESS1"))
+ )
+ fsm.act("ACK_ADDRESS1",
+ zero_drv.eq(1),
+ If(scl_i, NextState("ACK_ADDRESS2"))
+ )
+ fsm.act("ACK_ADDRESS2",
+ zero_drv.eq(1),
+ If(~scl_i,
+ If(is_read,
+ NextState("READ")
+ ).Else(
+ NextState("RCV_OFFSET")
+ )
+ )
+ )
+
+ fsm.act("RCV_OFFSET",
+ If(counter == 8,
+ oc_load.eq(1),
+ NextState("ACK_OFFSET0")
+ )
+ )
+ fsm.act("ACK_OFFSET0",
+ If(~scl_i, NextState("ACK_OFFSET1"))
+ )
+ fsm.act("ACK_OFFSET1",
+ zero_drv.eq(1),
+ If(scl_i, NextState("ACK_OFFSET2"))
+ )
+ fsm.act("ACK_OFFSET2",
+ zero_drv.eq(1),
+ If(~scl_i, NextState("RCV_ADDRESS"))
+ )
+
+ fsm.act("READ",
+ If(~scl_i,
+ If(counter == 8,
+ data_drv_stop.eq(1),
+ NextState("ACK_READ")
+ ).Else(
+ data_drv_en.eq(1)
+ )
+ )
+ )
+ fsm.act("ACK_READ",
+ If(scl_rising,
+ oc_inc.eq(1),
+ If(sda_i,
+ NextState("WAIT_START")
+ ).Else(
+ NextState("READ")
+ )
+ )
+ )
+
+ for state in fsm.actions.keys():
+ fsm.act(state, If(start, NextState("RCV_ADDRESS")))
+ fsm.act(state, If(~self._hpd_en.storage, NextState("WAIT_START")))
--- /dev/null
+from migen import *
+from migen.bank.description import *
+from migen.genlib.misc import optree
+from migen.genlib.cdc import PulseSynchronizer
+
+from misoc.dvisampler.common import control_tokens
+
+
+class WER(Module, AutoCSR):
+ def __init__(self, period_bits=24):
+ self.data = Signal(10)
+ self._update = CSR()
+ self._value = CSRStatus(period_bits)
+
+ ###
+
+ # pipeline stage 1
+ # we ignore the 10th (inversion) bit, as it is independent of the transition minimization
+ data_r = Signal(9)
+ self.sync.pix += data_r.eq(self.data[:9])
+
+ # pipeline stage 2
+ transitions = Signal(8)
+ self.comb += [transitions[i].eq(data_r[i] ^ data_r[i+1]) for i in range(8)]
+ transition_count = Signal(max=9)
+ self.sync.pix += transition_count.eq(optree("+", [transitions[i] for i in range(8)]))
+
+ is_control = Signal()
+ self.sync.pix += is_control.eq(optree("|", [data_r == ct for ct in control_tokens]))
+
+ # pipeline stage 3
+ is_error = Signal()
+ self.sync.pix += is_error.eq((transition_count > 4) & ~is_control)
+
+ # counter
+ period_counter = Signal(period_bits)
+ period_done = Signal()
+ self.sync.pix += Cat(period_counter, period_done).eq(period_counter + 1)
+
+ wer_counter = Signal(period_bits)
+ wer_counter_r = Signal(period_bits)
+ wer_counter_r_updated = Signal()
+ self.sync.pix += [
+ wer_counter_r_updated.eq(period_done),
+ If(period_done,
+ wer_counter_r.eq(wer_counter),
+ wer_counter.eq(0)
+ ).Elif(is_error,
+ wer_counter.eq(wer_counter + 1)
+ )
+ ]
+
+ # sync to system clock domain
+ wer_counter_sys = Signal(period_bits)
+ self.submodules.ps_counter = PulseSynchronizer("pix", "sys")
+ self.comb += self.ps_counter.i.eq(wer_counter_r_updated)
+ self.sync += If(self.ps_counter.o, wer_counter_sys.eq(wer_counter_r))
+
+ # register interface
+ self.sync += If(self._update.re, self._value.status.eq(wer_counter_sys))
+++ /dev/null
-from misoc.dvisampler.core import DVISampler
+++ /dev/null
-from migen import *
-from migen.genlib.cdc import MultiReg, PulseSynchronizer
-from migen.genlib.fifo import AsyncFIFO
-from migen.genlib.record import Record
-from migen.bank.description import *
-from migen.flow.actor import *
-
-from misoc.dvisampler.common import channel_layout
-
-
-class SyncPolarity(Module):
- def __init__(self):
- self.valid_i = Signal()
- self.data_in0 = Record(channel_layout)
- self.data_in1 = Record(channel_layout)
- self.data_in2 = Record(channel_layout)
-
- self.valid_o = Signal()
- self.de = Signal()
- self.hsync = Signal()
- self.vsync = Signal()
- self.r = Signal(8)
- self.g = Signal(8)
- self.b = Signal(8)
-
- ###
-
- de = self.data_in0.de
- de_r = Signal()
- c = self.data_in0.c
- c_polarity = Signal(2)
- c_out = Signal(2)
-
- self.comb += [
- self.de.eq(de_r),
- self.hsync.eq(c_out[0]),
- self.vsync.eq(c_out[1])
- ]
-
- self.sync.pix += [
- self.valid_o.eq(self.valid_i),
- self.r.eq(self.data_in2.d),
- self.g.eq(self.data_in1.d),
- self.b.eq(self.data_in0.d),
-
- de_r.eq(de),
- If(de_r & ~de,
- c_polarity.eq(c),
- c_out.eq(0)
- ).Else(
- c_out.eq(c ^ c_polarity)
- )
- ]
-
-
-class ResolutionDetection(Module, AutoCSR):
- def __init__(self, nbits=11):
- self.valid_i = Signal()
- self.vsync = Signal()
- self.de = Signal()
-
- self._hres = CSRStatus(nbits)
- self._vres = CSRStatus(nbits)
-
- ###
-
- # Detect DE transitions
- de_r = Signal()
- pn_de = Signal()
- self.sync.pix += de_r.eq(self.de)
- self.comb += pn_de.eq(~self.de & de_r)
-
- # HRES
- hcounter = Signal(nbits)
- self.sync.pix += If(self.valid_i & self.de,
- hcounter.eq(hcounter + 1)
- ).Else(
- hcounter.eq(0)
- )
-
- hcounter_st = Signal(nbits)
- self.sync.pix += If(self.valid_i,
- If(pn_de, hcounter_st.eq(hcounter))
- ).Else(
- hcounter_st.eq(0)
- )
- self.specials += MultiReg(hcounter_st, self._hres.status)
-
- # VRES
- vsync_r = Signal()
- p_vsync = Signal()
- self.sync.pix += vsync_r.eq(self.vsync),
- self.comb += p_vsync.eq(self.vsync & ~vsync_r)
-
- vcounter = Signal(nbits)
- self.sync.pix += If(self.valid_i & p_vsync,
- vcounter.eq(0)
- ).Elif(pn_de,
- vcounter.eq(vcounter + 1)
- )
-
- vcounter_st = Signal(nbits)
- self.sync.pix += If(self.valid_i,
- If(p_vsync, vcounter_st.eq(vcounter))
- ).Else(
- vcounter_st.eq(0)
- )
- self.specials += MultiReg(vcounter_st, self._vres.status)
-
-
-class FrameExtraction(Module, AutoCSR):
- def __init__(self, word_width, fifo_depth):
- # in pix clock domain
- self.valid_i = Signal()
- self.vsync = Signal()
- self.de = Signal()
- self.r = Signal(8)
- self.g = Signal(8)
- self.b = Signal(8)
-
- # in sys clock domain
- word_layout = [("sof", 1), ("pixels", word_width)]
- self.frame = Source(word_layout)
- self.busy = Signal()
-
- self._overflow = CSR()
-
- ###
-
- # start of frame detection
- vsync_r = Signal()
- new_frame = Signal()
- self.comb += new_frame.eq(self.vsync & ~vsync_r)
- self.sync.pix += vsync_r.eq(self.vsync)
-
- # pack pixels into words
- cur_word = Signal(word_width)
- cur_word_valid = Signal()
- encoded_pixel = Signal(24)
- self.comb += encoded_pixel.eq(Cat(self.b, self.g, self.r))
- pack_factor = word_width//24
- assert(pack_factor & (pack_factor - 1) == 0) # only support powers of 2
- pack_counter = Signal(max=pack_factor)
- self.sync.pix += [
- cur_word_valid.eq(0),
- If(new_frame,
- cur_word_valid.eq(pack_counter == (pack_factor - 1)),
- pack_counter.eq(0),
- ).Elif(self.valid_i & self.de,
- [If(pack_counter == (pack_factor-i-1),
- cur_word[24*i:24*(i+1)].eq(encoded_pixel)) for i in range(pack_factor)],
- cur_word_valid.eq(pack_counter == (pack_factor - 1)),
- pack_counter.eq(pack_counter + 1)
- )
- ]
-
- # FIFO
- fifo = RenameClockDomains(AsyncFIFO(word_layout, fifo_depth),
- {"write": "pix", "read": "sys"})
- self.submodules += fifo
- self.comb += [
- fifo.din.pixels.eq(cur_word),
- fifo.we.eq(cur_word_valid)
- ]
- self.sync.pix += \
- If(new_frame,
- fifo.din.sof.eq(1)
- ).Elif(cur_word_valid,
- fifo.din.sof.eq(0)
- )
- self.comb += [
- self.frame.stb.eq(fifo.readable),
- self.frame.payload.eq(fifo.dout),
- fifo.re.eq(self.frame.ack),
- self.busy.eq(0)
- ]
-
- # overflow detection
- pix_overflow = Signal()
- pix_overflow_reset = Signal()
- self.sync.pix += [
- If(fifo.we & ~fifo.writable,
- pix_overflow.eq(1)
- ).Elif(pix_overflow_reset,
- pix_overflow.eq(0)
- )
- ]
-
- sys_overflow = Signal()
- self.specials += MultiReg(pix_overflow, sys_overflow)
- self.submodules.overflow_reset = PulseSynchronizer("sys", "pix")
- self.submodules.overflow_reset_ack = PulseSynchronizer("pix", "sys")
- self.comb += [
- pix_overflow_reset.eq(self.overflow_reset.o),
- self.overflow_reset_ack.i.eq(pix_overflow_reset)
- ]
-
- overflow_mask = Signal()
- self.comb += [
- self._overflow.w.eq(sys_overflow & ~overflow_mask),
- self.overflow_reset.i.eq(self._overflow.re)
- ]
- self.sync += \
- If(self._overflow.re,
- overflow_mask.eq(1)
- ).Elif(self.overflow_reset_ack.o,
- overflow_mask.eq(0)
- )
+++ /dev/null
-from migen import *
-from migen.genlib.cdc import MultiReg
-from migen.genlib.fifo import _inc
-from migen.genlib.record import Record, layout_len
-from migen.genlib.misc import optree
-from migen.bank.description import *
-
-from misoc.dvisampler.common import channel_layout
-
-
-class _SyncBuffer(Module):
- def __init__(self, width, depth):
- self.din = Signal(width)
- self.dout = Signal(width)
- self.re = Signal()
-
- ###
-
- produce = Signal(max=depth)
- consume = Signal(max=depth)
- storage = Memory(width, depth)
- self.specials += storage
-
- wrport = storage.get_port(write_capable=True)
- self.specials += wrport
- self.comb += [
- wrport.adr.eq(produce),
- wrport.dat_w.eq(self.din),
- wrport.we.eq(1)
- ]
- self.sync += _inc(produce, depth)
-
- rdport = storage.get_port(async_read=True)
- self.specials += rdport
- self.comb += [
- rdport.adr.eq(consume),
- self.dout.eq(rdport.dat_r)
- ]
- self.sync += If(self.re, _inc(consume, depth))
-
-
-class ChanSync(Module, AutoCSR):
- def __init__(self, nchan=3, depth=8):
- self.valid_i = Signal()
- self.chan_synced = Signal()
-
- self._channels_synced = CSRStatus()
-
- lst_control = []
- all_control = Signal()
- for i in range(nchan):
- name = "data_in" + str(i)
- data_in = Record(channel_layout, name=name)
- setattr(self, name, data_in)
- name = "data_out" + str(i)
- data_out = Record(channel_layout, name=name)
- setattr(self, name, data_out)
-
- ###
-
- syncbuffer = RenameClockDomains(_SyncBuffer(layout_len(channel_layout), depth), "pix")
- self.submodules += syncbuffer
- self.comb += [
- syncbuffer.din.eq(data_in.raw_bits()),
- data_out.raw_bits().eq(syncbuffer.dout)
- ]
- is_control = Signal()
- self.comb += [
- is_control.eq(~data_out.de),
- syncbuffer.re.eq(~is_control | all_control)
- ]
- lst_control.append(is_control)
-
- some_control = Signal()
- self.comb += [
- all_control.eq(optree("&", lst_control)),
- some_control.eq(optree("|", lst_control))
- ]
- self.sync.pix += If(~self.valid_i,
- self.chan_synced.eq(0)
- ).Else(
- If(some_control,
- If(all_control,
- self.chan_synced.eq(1)
- ).Else(
- self.chan_synced.eq(0)
- )
- )
- )
- self.specials += MultiReg(self.chan_synced, self._channels_synced.status)
-
-
-class _TB(Module):
- def __init__(self, test_seq_it):
- self.test_seq_it = test_seq_it
-
- self.submodules.chansync = RenameClockDomains(ChanSync(), {"pix": "sys"})
- self.comb += self.chansync.valid_i.eq(1)
-
- def do_simulation(self, selfp):
- try:
- de0, de1, de2 = next(self.test_seq_it)
- except StopIteration:
- raise StopSimulation
-
- selfp.chansync.data_in0.de = de0
- selfp.chansync.data_in1.de = de1
- selfp.chansync.data_in2.de = de2
- selfp.chansync.data_in0.d = selfp.simulator.cycle_counter
- selfp.chansync.data_in1.d = selfp.simulator.cycle_counter
- selfp.chansync.data_in2.d = selfp.simulator.cycle_counter
-
- out0 = selfp.chansync.data_out0.d
- out1 = selfp.chansync.data_out1.d
- out2 = selfp.chansync.data_out2.d
-
- print("{0:5} {1:5} {2:5}".format(out0, out1, out2))
-
-if __name__ == "__main__":
- from migen.sim.generic import run_simulation
-
- test_seq = [
- (1, 1, 1),
- (1, 1, 0),
- (0, 0, 0),
- (0, 0, 0),
- (0, 0, 1),
- (1, 1, 1),
- (1, 1, 1),
- ]
- tb = _TB(iter(test_seq*2))
- run_simulation(tb)
+++ /dev/null
-from migen import *
-from migen.genlib.cdc import MultiReg
-from migen.genlib.misc import optree
-from migen.bank.description import *
-
-from misoc.dvisampler.common import control_tokens
-
-
-class CharSync(Module, AutoCSR):
- def __init__(self, required_controls=8):
- self.raw_data = Signal(10)
- self.synced = Signal()
- self.data = Signal(10)
-
- self._char_synced = CSRStatus()
- self._ctl_pos = CSRStatus(bits_for(9))
-
- ###
-
- raw_data1 = Signal(10)
- self.sync.pix += raw_data1.eq(self.raw_data)
- raw = Signal(20)
- self.comb += raw.eq(Cat(raw_data1, self.raw_data))
-
- found_control = Signal()
- control_position = Signal(max=10)
- self.sync.pix += found_control.eq(0)
- for i in range(10):
- self.sync.pix += If(optree("|", [raw[i:i+10] == t for t in control_tokens]),
- found_control.eq(1),
- control_position.eq(i)
- )
-
- control_counter = Signal(max=required_controls)
- previous_control_position = Signal(max=10)
- word_sel = Signal(max=10)
- self.sync.pix += [
- If(found_control & (control_position == previous_control_position),
- If(control_counter == (required_controls - 1),
- control_counter.eq(0),
- self.synced.eq(1),
- word_sel.eq(control_position)
- ).Else(
- control_counter.eq(control_counter + 1)
- )
- ).Else(
- control_counter.eq(0)
- ),
- previous_control_position.eq(control_position)
- ]
- self.specials += MultiReg(self.synced, self._char_synced.status)
- self.specials += MultiReg(word_sel, self._ctl_pos.status)
-
- self.sync.pix += self.data.eq(raw >> word_sel)
+++ /dev/null
-from migen import *
-from migen.genlib.cdc import MultiReg
-from migen.bank.description import *
-
-
-class Clocking(Module, AutoCSR):
- def __init__(self, pads):
- self._pll_reset = CSRStorage(reset=1)
- self._locked = CSRStatus()
-
- # DRP
- self._pll_adr = CSRStorage(5)
- self._pll_dat_r = CSRStatus(16)
- self._pll_dat_w = CSRStorage(16)
- self._pll_read = CSR()
- self._pll_write = CSR()
- self._pll_drdy = CSRStatus()
-
- self.locked = Signal()
- self.serdesstrobe = Signal()
- self.clock_domains._cd_pix = ClockDomain()
- self.clock_domains._cd_pix2x = ClockDomain()
- self.clock_domains._cd_pix10x = ClockDomain(reset_less=True)
-
- ###
-
- clk_se = Signal()
- self.specials += Instance("IBUFDS", i_I=pads.clk_p, i_IB=pads.clk_n, o_O=clk_se)
-
- clkfbout = Signal()
- pll_locked = Signal()
- pll_clk0 = Signal()
- pll_clk1 = Signal()
- pll_clk2 = Signal()
- pll_drdy = Signal()
- self.sync += If(self._pll_read.re | self._pll_write.re,
- self._pll_drdy.status.eq(0)
- ).Elif(pll_drdy,
- self._pll_drdy.status.eq(1)
- )
- self.specials += Instance("PLL_ADV",
- p_CLKFBOUT_MULT=10,
- p_CLKOUT0_DIVIDE=1, # pix10x
- p_CLKOUT1_DIVIDE=5, # pix2x
- p_CLKOUT2_DIVIDE=10, # pix
- p_COMPENSATION="INTERNAL",
-
- i_CLKINSEL=1,
- i_CLKIN1=clk_se,
- o_CLKOUT0=pll_clk0, o_CLKOUT1=pll_clk1, o_CLKOUT2=pll_clk2,
- o_CLKFBOUT=clkfbout, i_CLKFBIN=clkfbout,
- o_LOCKED=pll_locked, i_RST=self._pll_reset.storage,
-
- i_DADDR=self._pll_adr.storage,
- o_DO=self._pll_dat_r.status,
- i_DI=self._pll_dat_w.storage,
- i_DEN=self._pll_read.re | self._pll_write.re,
- i_DWE=self._pll_write.re,
- o_DRDY=pll_drdy,
- i_DCLK=ClockSignal())
-
- locked_async = Signal()
- self.specials += [
- Instance("BUFPLL", p_DIVIDE=5,
- i_PLLIN=pll_clk0, i_GCLK=ClockSignal("pix2x"), i_LOCKED=pll_locked,
- o_IOCLK=self._cd_pix10x.clk, o_LOCK=locked_async, o_SERDESSTROBE=self.serdesstrobe),
- Instance("BUFG", i_I=pll_clk1, o_O=self._cd_pix2x.clk),
- Instance("BUFG", i_I=pll_clk2, o_O=self._cd_pix.clk),
- MultiReg(locked_async, self.locked, "sys")
- ]
- self.comb += self._locked.status.eq(self.locked)
-
- # sychronize pix+pix2x reset
- pix_rst_n = 1
- for i in range(2):
- new_pix_rst_n = Signal()
- self.specials += Instance("FDCE", i_D=pix_rst_n, i_CE=1, i_C=ClockSignal("pix"),
- i_CLR=~locked_async, o_Q=new_pix_rst_n)
- pix_rst_n = new_pix_rst_n
- self.comb += self._cd_pix.rst.eq(~pix_rst_n), self._cd_pix2x.rst.eq(~pix_rst_n)
+++ /dev/null
-control_tokens = [0b1101010100, 0b0010101011, 0b0101010100, 0b1010101011]
-channel_layout = [("d", 8), ("c", 2), ("de", 1)]
+++ /dev/null
-from migen import *
-from migen.bank.description import AutoCSR
-
-from misoc.dvisampler.edid import EDID
-from misoc.dvisampler.clocking import Clocking
-from misoc.dvisampler.datacapture import DataCapture
-from misoc.dvisampler.charsync import CharSync
-from misoc.dvisampler.wer import WER
-from misoc.dvisampler.decoding import Decoding
-from misoc.dvisampler.chansync import ChanSync
-from misoc.dvisampler.analysis import SyncPolarity, ResolutionDetection, FrameExtraction
-from misoc.dvisampler.dma import DMA
-
-
-class DVISampler(Module, AutoCSR):
- def __init__(self, pads, lasmim, n_dma_slots=2, fifo_depth=512):
- self.submodules.edid = EDID(pads)
- self.submodules.clocking = Clocking(pads)
-
- for datan in range(3):
- name = "data" + str(datan)
-
- cap = DataCapture(getattr(pads, name + "_p"), getattr(pads, name + "_n"), 8)
- setattr(self.submodules, name + "_cap", cap)
- self.comb += cap.serdesstrobe.eq(self.clocking.serdesstrobe)
-
- charsync = CharSync()
- setattr(self.submodules, name + "_charsync", charsync)
- self.comb += charsync.raw_data.eq(cap.d)
-
- wer = WER()
- setattr(self.submodules, name + "_wer", wer)
- self.comb += wer.data.eq(charsync.data)
-
- decoding = Decoding()
- setattr(self.submodules, name + "_decod", decoding)
- self.comb += [
- decoding.valid_i.eq(charsync.synced),
- decoding.input.eq(charsync.data)
- ]
-
- self.submodules.chansync = ChanSync()
- self.comb += [
- self.chansync.valid_i.eq(self.data0_decod.valid_o & \
- self.data1_decod.valid_o & self.data2_decod.valid_o),
- self.chansync.data_in0.eq(self.data0_decod.output),
- self.chansync.data_in1.eq(self.data1_decod.output),
- self.chansync.data_in2.eq(self.data2_decod.output),
- ]
-
- self.submodules.syncpol = SyncPolarity()
- self.comb += [
- self.syncpol.valid_i.eq(self.chansync.chan_synced),
- self.syncpol.data_in0.eq(self.chansync.data_out0),
- self.syncpol.data_in1.eq(self.chansync.data_out1),
- self.syncpol.data_in2.eq(self.chansync.data_out2)
- ]
-
- self.submodules.resdetection = ResolutionDetection()
- self.comb += [
- self.resdetection.valid_i.eq(self.syncpol.valid_o),
- self.resdetection.de.eq(self.syncpol.de),
- self.resdetection.vsync.eq(self.syncpol.vsync)
- ]
-
- self.submodules.frame = FrameExtraction(24*lasmim.dw//32, fifo_depth)
- self.comb += [
- self.frame.valid_i.eq(self.syncpol.valid_o),
- self.frame.de.eq(self.syncpol.de),
- self.frame.vsync.eq(self.syncpol.vsync),
- self.frame.r.eq(self.syncpol.r),
- self.frame.g.eq(self.syncpol.g),
- self.frame.b.eq(self.syncpol.b)
- ]
-
- self.submodules.dma = DMA(lasmim, n_dma_slots)
- self.comb += self.frame.frame.connect(self.dma.frame)
- self.ev = self.dma.ev
-
- autocsr_exclude = {"ev"}
+++ /dev/null
-from migen import *
-from migen.genlib.cdc import MultiReg, PulseSynchronizer
-from migen.bank.description import *
-
-
-class DataCapture(Module, AutoCSR):
- def __init__(self, pad_p, pad_n, ntbits):
- self.serdesstrobe = Signal()
- self.d = Signal(10)
-
- self._dly_ctl = CSR(6)
- self._dly_busy = CSRStatus(2)
- self._phase = CSRStatus(2)
- self._phase_reset = CSR()
-
- ###
-
- # IO
- pad_se = Signal()
- self.specials += Instance("IBUFDS", i_I=pad_p, i_IB=pad_n, o_O=pad_se)
-
- pad_delayed_master = Signal()
- pad_delayed_slave = Signal()
- delay_inc = Signal()
- delay_ce = Signal()
- delay_master_cal = Signal()
- delay_master_rst = Signal()
- delay_master_busy = Signal()
- delay_slave_cal = Signal()
- delay_slave_rst = Signal()
- delay_slave_busy = Signal()
- self.specials += Instance("IODELAY2",
- p_SERDES_MODE="MASTER",
- p_DELAY_SRC="IDATAIN", p_IDELAY_TYPE="DIFF_PHASE_DETECTOR",
- p_COUNTER_WRAPAROUND="STAY_AT_LIMIT", p_DATA_RATE="SDR",
-
- i_IDATAIN=pad_se, o_DATAOUT=pad_delayed_master,
- i_CLK=ClockSignal("pix2x"), i_IOCLK0=ClockSignal("pix10x"),
-
- i_INC=delay_inc, i_CE=delay_ce,
- i_CAL=delay_master_cal, i_RST=delay_master_rst, o_BUSY=delay_master_busy,
- i_T=1)
- self.specials += Instance("IODELAY2",
- p_SERDES_MODE="SLAVE",
- p_DELAY_SRC="IDATAIN", p_IDELAY_TYPE="DIFF_PHASE_DETECTOR",
- p_COUNTER_WRAPAROUND="WRAPAROUND", p_DATA_RATE="SDR",
-
- i_IDATAIN=pad_se, o_DATAOUT=pad_delayed_slave,
- i_CLK=ClockSignal("pix2x"), i_IOCLK0=ClockSignal("pix10x"),
-
- i_INC=delay_inc, i_CE=delay_ce,
- i_CAL=delay_slave_cal, i_RST=delay_slave_rst, o_BUSY=delay_slave_busy,
- i_T=1)
-
- dsr2 = Signal(5)
- pd_valid = Signal()
- pd_incdec = Signal()
- pd_edge = Signal()
- pd_cascade = Signal()
- self.specials += Instance("ISERDES2",
- p_SERDES_MODE="MASTER",
- p_BITSLIP_ENABLE="FALSE", p_DATA_RATE="SDR", p_DATA_WIDTH=5,
- p_INTERFACE_TYPE="RETIMED",
-
- i_D=pad_delayed_master,
- o_Q4=dsr2[4], o_Q3=dsr2[3], o_Q2=dsr2[2], o_Q1=dsr2[1],
-
- i_BITSLIP=0, i_CE0=1, i_RST=0,
- i_CLK0=ClockSignal("pix10x"), i_CLKDIV=ClockSignal("pix2x"),
- i_IOCE=self.serdesstrobe,
-
- o_VALID=pd_valid, o_INCDEC=pd_incdec,
- i_SHIFTIN=pd_edge, o_SHIFTOUT=pd_cascade)
- self.specials += Instance("ISERDES2",
- p_SERDES_MODE="SLAVE",
- p_BITSLIP_ENABLE="FALSE", p_DATA_RATE="SDR", p_DATA_WIDTH=5,
- p_INTERFACE_TYPE="RETIMED",
-
- i_D=pad_delayed_slave,
- o_Q4=dsr2[0],
-
- i_BITSLIP=0, i_CE0=1, i_RST=0,
- i_CLK0=ClockSignal("pix10x"), i_CLKDIV=ClockSignal("pix2x"),
- i_IOCE=self.serdesstrobe,
-
- i_SHIFTIN=pd_cascade, o_SHIFTOUT=pd_edge)
-
- # Phase error accumulator
- lateness = Signal(ntbits, reset=2**(ntbits - 1))
- too_late = Signal()
- too_early = Signal()
- reset_lateness = Signal()
- self.comb += [
- too_late.eq(lateness == (2**ntbits - 1)),
- too_early.eq(lateness == 0)
- ]
- self.sync.pix2x += [
- If(reset_lateness,
- lateness.eq(2**(ntbits - 1))
- ).Elif(~delay_master_busy & ~delay_slave_busy & ~too_late & ~too_early,
- If(pd_valid & pd_incdec, lateness.eq(lateness - 1)),
- If(pd_valid & ~pd_incdec, lateness.eq(lateness + 1))
- )
- ]
-
- # Delay control
- self.submodules.delay_master_done = PulseSynchronizer("pix2x", "sys")
- delay_master_pending = Signal()
- self.sync.pix2x += [
- self.delay_master_done.i.eq(0),
- If(~delay_master_pending,
- If(delay_master_cal | delay_ce, delay_master_pending.eq(1))
- ).Else(
- If(~delay_master_busy,
- self.delay_master_done.i.eq(1),
- delay_master_pending.eq(0)
- )
- )
- ]
- self.submodules.delay_slave_done = PulseSynchronizer("pix2x", "sys")
- delay_slave_pending = Signal()
- self.sync.pix2x += [
- self.delay_slave_done.i.eq(0),
- If(~delay_slave_pending,
- If(delay_slave_cal | delay_ce, delay_slave_pending.eq(1))
- ).Else(
- If(~delay_slave_busy,
- self.delay_slave_done.i.eq(1),
- delay_slave_pending.eq(0)
- )
- )
- ]
-
- self.submodules.do_delay_master_cal = PulseSynchronizer("sys", "pix2x")
- self.submodules.do_delay_master_rst = PulseSynchronizer("sys", "pix2x")
- self.submodules.do_delay_slave_cal = PulseSynchronizer("sys", "pix2x")
- self.submodules.do_delay_slave_rst = PulseSynchronizer("sys", "pix2x")
- self.submodules.do_delay_inc = PulseSynchronizer("sys", "pix2x")
- self.submodules.do_delay_dec = PulseSynchronizer("sys", "pix2x")
- self.comb += [
- delay_master_cal.eq(self.do_delay_master_cal.o),
- delay_master_rst.eq(self.do_delay_master_rst.o),
- delay_slave_cal.eq(self.do_delay_slave_cal.o),
- delay_slave_rst.eq(self.do_delay_slave_rst.o),
- delay_inc.eq(self.do_delay_inc.o),
- delay_ce.eq(self.do_delay_inc.o | self.do_delay_dec.o),
- ]
-
- sys_delay_master_pending = Signal()
- self.sync += [
- If(self.do_delay_master_cal.i | self.do_delay_inc.i | self.do_delay_dec.i,
- sys_delay_master_pending.eq(1)
- ).Elif(self.delay_master_done.o,
- sys_delay_master_pending.eq(0)
- )
- ]
- sys_delay_slave_pending = Signal()
- self.sync += [
- If(self.do_delay_slave_cal.i | self.do_delay_inc.i | self.do_delay_dec.i,
- sys_delay_slave_pending.eq(1)
- ).Elif(self.delay_slave_done.o,
- sys_delay_slave_pending.eq(0)
- )
- ]
-
- self.comb += [
- self.do_delay_master_cal.i.eq(self._dly_ctl.re & self._dly_ctl.r[0]),
- self.do_delay_master_rst.i.eq(self._dly_ctl.re & self._dly_ctl.r[1]),
- self.do_delay_slave_cal.i.eq(self._dly_ctl.re & self._dly_ctl.r[2]),
- self.do_delay_slave_rst.i.eq(self._dly_ctl.re & self._dly_ctl.r[3]),
- self.do_delay_inc.i.eq(self._dly_ctl.re & self._dly_ctl.r[4]),
- self.do_delay_dec.i.eq(self._dly_ctl.re & self._dly_ctl.r[5]),
- self._dly_busy.status.eq(Cat(sys_delay_master_pending, sys_delay_slave_pending))
- ]
-
- # Phase detector control
- self.specials += MultiReg(Cat(too_late, too_early), self._phase.status)
- self.submodules.do_reset_lateness = PulseSynchronizer("sys", "pix2x")
- self.comb += [
- reset_lateness.eq(self.do_reset_lateness.o),
- self.do_reset_lateness.i.eq(self._phase_reset.re)
- ]
-
- # 5:10 deserialization
- dsr = Signal(10)
- self.sync.pix2x += dsr.eq(Cat(dsr[5:], dsr2))
- self.sync.pix += self.d.eq(dsr)
+++ /dev/null
-from migen import *
-from migen.genlib.fifo import AsyncFIFO
-from migen.genlib.record import layout_len
-from migen.bank.description import AutoCSR
-from migen.actorlib import structuring, spi
-
-from misoc.mem.sdram.frontend import dma_lasmi
-from misoc.dvisampler.edid import EDID
-from misoc.dvisampler.clocking import Clocking
-from misoc.dvisampler.datacapture import DataCapture
-
-
-class RawDVISampler(Module, AutoCSR):
- def __init__(self, pads, asmiport):
- self.submodules.edid = EDID(pads)
- self.submodules.clocking = Clocking(pads)
-
- invert = False
- try:
- s = getattr(pads, "data0")
- except AttributeError:
- s = getattr(pads, "data0_n")
- invert = True
- self.submodules.data0_cap = DataCapture(8, invert)
- self.comb += [
- self.data0_cap.pad.eq(s),
- self.data0_cap.serdesstrobe.eq(self.clocking.serdesstrobe)
- ]
-
- fifo = RenameClockDomains(AsyncFIFO(10, 256),
- {"write": "pix", "read": "sys"})
- self.submodules += fifo
- self.comb += [
- fifo.din.eq(self.data0_cap.d),
- fifo.we.eq(1)
- ]
-
- pack_factor = asmiport.hub.dw//16
- self.submodules.packer = structuring.Pack([("word", 10), ("pad", 6)], pack_factor)
- self.submodules.cast = structuring.Cast(self.packer.source.payload.layout, asmiport.hub.dw)
- self.submodules.dma = spi.DMAWriteController(dma_lasmi.Writer(lasmim), spi.MODE_SINGLE_SHOT)
- self.comb += [
- self.packer.sink.stb.eq(fifo.readable),
- fifo.re.eq(self.packer.sink.ack),
- self.packer.sink.word.eq(fifo.dout),
- self.packer.source.connect_flat(self.cast.sink),
- self.cast.source.connect_flat(self.dma.data)
- ]
+++ /dev/null
-from migen import *
-from migen.genlib.record import Record
-
-from misoc.dvisampler.common import control_tokens, channel_layout
-
-
-class Decoding(Module):
- def __init__(self):
- self.valid_i = Signal()
- self.input = Signal(10)
- self.valid_o = Signal()
- self.output = Record(channel_layout)
-
- ###
-
- self.sync.pix += self.output.de.eq(1)
- for i, t in enumerate(control_tokens):
- self.sync.pix += If(self.input == t,
- self.output.de.eq(0),
- self.output.c.eq(i)
- )
- self.sync.pix += self.output.d[0].eq(self.input[0] ^ self.input[9])
- for i in range(1, 8):
- self.sync.pix += self.output.d[i].eq(self.input[i] ^ self.input[i-1] ^ ~self.input[8])
- self.sync.pix += self.valid_o.eq(self.valid_i)
+++ /dev/null
-from migen import *
-from migen.genlib.fsm import FSM, NextState
-from migen.bank.description import *
-from migen.bank.eventmanager import *
-from migen.flow.actor import *
-
-from misoc.mem.sdram.frontend import dma_lasmi
-
-
-# Slot status: EMPTY=0 LOADED=1 PENDING=2
-class _Slot(Module, AutoCSR):
- def __init__(self, addr_bits, alignment_bits):
- self.ev_source = EventSourceLevel()
- self.address = Signal(addr_bits)
- self.address_reached = Signal(addr_bits)
- self.address_valid = Signal()
- self.address_done = Signal()
-
- self._status = CSRStorage(2, write_from_dev=True)
- self._address = CSRStorage(addr_bits + alignment_bits, alignment_bits=alignment_bits, write_from_dev=True)
-
- ###
-
- self.comb += [
- self.address.eq(self._address.storage),
- self.address_valid.eq(self._status.storage[0]),
- self._status.dat_w.eq(2),
- self._status.we.eq(self.address_done),
- self._address.dat_w.eq(self.address_reached),
- self._address.we.eq(self.address_done),
- self.ev_source.trigger.eq(self._status.storage[1])
- ]
-
-
-class _SlotArray(Module, AutoCSR):
- def __init__(self, nslots, addr_bits, alignment_bits):
- self.submodules.ev = EventManager()
- self.address = Signal(addr_bits)
- self.address_reached = Signal(addr_bits)
- self.address_valid = Signal()
- self.address_done = Signal()
-
- ###
-
- slots = [_Slot(addr_bits, alignment_bits) for i in range(nslots)]
- for n, slot in enumerate(slots):
- setattr(self.submodules, "slot"+str(n), slot)
- setattr(self.ev, "slot"+str(n), slot.ev_source)
- self.ev.finalize()
-
- change_slot = Signal()
- current_slot = Signal(max=nslots)
- self.sync += If(change_slot, [If(slot.address_valid, current_slot.eq(n)) for n, slot in reversed(list(enumerate(slots)))])
- self.comb += change_slot.eq(~self.address_valid | self.address_done)
-
- self.comb += [
- self.address.eq(Array(slot.address for slot in slots)[current_slot]),
- self.address_valid.eq(Array(slot.address_valid for slot in slots)[current_slot])
- ]
- self.comb += [slot.address_reached.eq(self.address_reached) for slot in slots]
- self.comb += [slot.address_done.eq(self.address_done & (current_slot == n)) for n, slot in enumerate(slots)]
-
-
-class DMA(Module):
- def __init__(self, lasmim, nslots):
- bus_aw = lasmim.aw
- bus_dw = lasmim.dw
- alignment_bits = bits_for(bus_dw//8) - 1
-
- fifo_word_width = 24*bus_dw//32
- self.frame = Sink([("sof", 1), ("pixels", fifo_word_width)])
- self._frame_size = CSRStorage(bus_aw + alignment_bits, alignment_bits=alignment_bits)
- self.submodules._slot_array = _SlotArray(nslots, bus_aw, alignment_bits)
- self.ev = self._slot_array.ev
-
- ###
-
- # address generator + maximum memory word count to prevent DMA buffer overrun
- reset_words = Signal()
- count_word = Signal()
- last_word = Signal()
- current_address = Signal(bus_aw)
- mwords_remaining = Signal(bus_aw)
- self.comb += [
- self._slot_array.address_reached.eq(current_address),
- last_word.eq(mwords_remaining == 1)
- ]
- self.sync += [
- If(reset_words,
- current_address.eq(self._slot_array.address),
- mwords_remaining.eq(self._frame_size.storage)
- ).Elif(count_word,
- current_address.eq(current_address + 1),
- mwords_remaining.eq(mwords_remaining - 1)
- )
- ]
-
- # 24bpp -> 32bpp
- memory_word = Signal(bus_dw)
- pixbits = []
- for i in range(bus_dw//32):
- for j in range(3):
- b = (i*3+j)*8
- pixbits.append(self.frame.pixels[b+6:b+8])
- pixbits.append(self.frame.pixels[b:b+8])
- pixbits.append(0)
- pixbits.append(0)
- self.comb += memory_word.eq(Cat(*pixbits))
-
- # bus accessor
- self.submodules._bus_accessor = dma_lasmi.Writer(lasmim)
- self.comb += [
- self._bus_accessor.address_data.a.eq(current_address),
- self._bus_accessor.address_data.d.eq(memory_word)
- ]
-
- # control FSM
- fsm = FSM()
- self.submodules += fsm
-
- fsm.act("WAIT_SOF",
- reset_words.eq(1),
- self.frame.ack.eq(~self._slot_array.address_valid | ~self.frame.sof),
- If(self._slot_array.address_valid & self.frame.sof & self.frame.stb, NextState("TRANSFER_PIXELS"))
- )
- fsm.act("TRANSFER_PIXELS",
- self.frame.ack.eq(self._bus_accessor.address_data.ack),
- If(self.frame.stb,
- self._bus_accessor.address_data.stb.eq(1),
- If(self._bus_accessor.address_data.ack,
- count_word.eq(1),
- If(last_word, NextState("EOF"))
- )
- )
- )
- fsm.act("EOF",
- If(~self._bus_accessor.busy,
- self._slot_array.address_done.eq(1),
- NextState("WAIT_SOF")
- )
- )
-
- def get_csrs(self):
- return [self._frame_size] + self._slot_array.get_csrs()
+++ /dev/null
-from migen import *
-from migen.fhdl.specials import Tristate
-from migen.genlib.cdc import MultiReg
-from migen.genlib.fsm import FSM, NextState
-from migen.genlib.misc import chooser
-from migen.bank.description import CSRStorage, CSRStatus, AutoCSR
-
-_default_edid = [
- 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x3D, 0x17, 0x32, 0x12, 0x2A, 0x6A, 0xBF, 0x00,
- 0x05, 0x17, 0x01, 0x03, 0x80, 0x28, 0x1E, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x2E, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xB2, 0x0C, 0x00, 0x40, 0x41, 0x00, 0x26, 0x30, 0x18, 0x88,
- 0x36, 0x00, 0x28, 0x1E, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x4D, 0x31, 0x20,
- 0x44, 0x56, 0x49, 0x20, 0x6D, 0x69, 0x78, 0x65, 0x72, 0x0A, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x34,
-]
-
-
-class EDID(Module, AutoCSR):
- def __init__(self, pads, default=_default_edid):
- self._hpd_notif = CSRStatus()
- self._hpd_en = CSRStorage()
- self.specials.mem = Memory(8, 128, init=default)
-
- ###
-
- # HPD
- if hasattr(pads, "hpd_notif"):
- self.specials += MultiReg(pads.hpd_notif, self._hpd_notif.status)
- else:
- self.comb += self._hpd_notif.status.eq(1)
- if hasattr(pads, "hpd_en"):
- self.comb += pads.hpd_en.eq(self._hpd_en.storage)
-
- # EDID
- scl_raw = Signal()
- sda_i = Signal()
- sda_raw = Signal()
- sda_drv = Signal()
- _sda_drv_reg = Signal()
- _sda_i_async = Signal()
- self.sync += _sda_drv_reg.eq(sda_drv)
- self.specials += [
- MultiReg(pads.scl, scl_raw),
- Tristate(pads.sda, 0, _sda_drv_reg, _sda_i_async),
- MultiReg(_sda_i_async, sda_raw)
- ]
-
- scl_i = Signal()
- samp_count = Signal(6)
- samp_carry = Signal()
- self.sync += [
- Cat(samp_count, samp_carry).eq(samp_count + 1),
- If(samp_carry,
- scl_i.eq(scl_raw),
- sda_i.eq(sda_raw)
- )
- ]
-
- scl_r = Signal()
- sda_r = Signal()
- scl_rising = Signal()
- sda_rising = Signal()
- sda_falling = Signal()
- self.sync += [
- scl_r.eq(scl_i),
- sda_r.eq(sda_i)
- ]
- self.comb += [
- scl_rising.eq(scl_i & ~scl_r),
- sda_rising.eq(sda_i & ~sda_r),
- sda_falling.eq(~sda_i & sda_r)
- ]
-
- start = Signal()
- self.comb += start.eq(scl_i & sda_falling)
-
- din = Signal(8)
- counter = Signal(max=9)
- self.sync += [
- If(start, counter.eq(0)),
- If(scl_rising,
- If(counter == 8,
- counter.eq(0)
- ).Else(
- counter.eq(counter + 1),
- din.eq(Cat(sda_i, din[:7]))
- )
- )
- ]
-
- is_read = Signal()
- update_is_read = Signal()
- self.sync += If(update_is_read, is_read.eq(din[0]))
-
- offset_counter = Signal(max=128)
- oc_load = Signal()
- oc_inc = Signal()
- self.sync += [
- If(oc_load,
- offset_counter.eq(din)
- ).Elif(oc_inc,
- offset_counter.eq(offset_counter + 1)
- )
- ]
- rdport = self.mem.get_port()
- self.specials += rdport
- self.comb += rdport.adr.eq(offset_counter)
- data_bit = Signal()
-
- zero_drv = Signal()
- data_drv = Signal()
- self.comb += If(zero_drv, sda_drv.eq(1)).Elif(data_drv, sda_drv.eq(~data_bit))
-
- data_drv_en = Signal()
- data_drv_stop = Signal()
- self.sync += If(data_drv_en, data_drv.eq(1)).Elif(data_drv_stop, data_drv.eq(0))
- self.sync += If(data_drv_en, chooser(rdport.dat_r, counter, data_bit, 8, reverse=True))
-
- fsm = FSM()
- self.submodules += fsm
-
- fsm.act("WAIT_START")
- fsm.act("RCV_ADDRESS",
- If(counter == 8,
- If(din[1:] == 0x50,
- update_is_read.eq(1),
- NextState("ACK_ADDRESS0")
- ).Else(
- NextState("WAIT_START")
- )
- )
- )
- fsm.act("ACK_ADDRESS0",
- If(~scl_i, NextState("ACK_ADDRESS1"))
- )
- fsm.act("ACK_ADDRESS1",
- zero_drv.eq(1),
- If(scl_i, NextState("ACK_ADDRESS2"))
- )
- fsm.act("ACK_ADDRESS2",
- zero_drv.eq(1),
- If(~scl_i,
- If(is_read,
- NextState("READ")
- ).Else(
- NextState("RCV_OFFSET")
- )
- )
- )
-
- fsm.act("RCV_OFFSET",
- If(counter == 8,
- oc_load.eq(1),
- NextState("ACK_OFFSET0")
- )
- )
- fsm.act("ACK_OFFSET0",
- If(~scl_i, NextState("ACK_OFFSET1"))
- )
- fsm.act("ACK_OFFSET1",
- zero_drv.eq(1),
- If(scl_i, NextState("ACK_OFFSET2"))
- )
- fsm.act("ACK_OFFSET2",
- zero_drv.eq(1),
- If(~scl_i, NextState("RCV_ADDRESS"))
- )
-
- fsm.act("READ",
- If(~scl_i,
- If(counter == 8,
- data_drv_stop.eq(1),
- NextState("ACK_READ")
- ).Else(
- data_drv_en.eq(1)
- )
- )
- )
- fsm.act("ACK_READ",
- If(scl_rising,
- oc_inc.eq(1),
- If(sda_i,
- NextState("WAIT_START")
- ).Else(
- NextState("READ")
- )
- )
- )
-
- for state in fsm.actions.keys():
- fsm.act(state, If(start, NextState("RCV_ADDRESS")))
- fsm.act(state, If(~self._hpd_en.storage, NextState("WAIT_START")))
+++ /dev/null
-from migen import *
-from migen.bank.description import *
-from migen.genlib.misc import optree
-from migen.genlib.cdc import PulseSynchronizer
-
-from misoc.dvisampler.common import control_tokens
-
-
-class WER(Module, AutoCSR):
- def __init__(self, period_bits=24):
- self.data = Signal(10)
- self._update = CSR()
- self._value = CSRStatus(period_bits)
-
- ###
-
- # pipeline stage 1
- # we ignore the 10th (inversion) bit, as it is independent of the transition minimization
- data_r = Signal(9)
- self.sync.pix += data_r.eq(self.data[:9])
-
- # pipeline stage 2
- transitions = Signal(8)
- self.comb += [transitions[i].eq(data_r[i] ^ data_r[i+1]) for i in range(8)]
- transition_count = Signal(max=9)
- self.sync.pix += transition_count.eq(optree("+", [transitions[i] for i in range(8)]))
-
- is_control = Signal()
- self.sync.pix += is_control.eq(optree("|", [data_r == ct for ct in control_tokens]))
-
- # pipeline stage 3
- is_error = Signal()
- self.sync.pix += is_error.eq((transition_count > 4) & ~is_control)
-
- # counter
- period_counter = Signal(period_bits)
- period_done = Signal()
- self.sync.pix += Cat(period_counter, period_done).eq(period_counter + 1)
-
- wer_counter = Signal(period_bits)
- wer_counter_r = Signal(period_bits)
- wer_counter_r_updated = Signal()
- self.sync.pix += [
- wer_counter_r_updated.eq(period_done),
- If(period_done,
- wer_counter_r.eq(wer_counter),
- wer_counter.eq(0)
- ).Elif(is_error,
- wer_counter.eq(wer_counter + 1)
- )
- ]
-
- # sync to system clock domain
- wer_counter_sys = Signal(period_bits)
- self.submodules.ps_counter = PulseSynchronizer("pix", "sys")
- self.comb += self.ps_counter.i.eq(wer_counter_r_updated)
- self.sync += If(self.ps_counter.o, wer_counter_sys.eq(wer_counter_r))
-
- # register interface
- self.sync += If(self._update.re, self._value.status.eq(wer_counter_sys))
--- /dev/null
+from migen import *
+from migen.genlib.roundrobin import *
+from migen.genlib.fsm import FSM, NextState
+from migen.genlib.misc import optree
+from migen.genlib.fifo import SyncFIFO
+
+from misoc.mem.sdram.core.lasmicon.multiplexer import *
+
+
+class _AddressSlicer:
+ def __init__(self, colbits, address_align):
+ self.colbits = colbits
+ self.address_align = address_align
+
+ def row(self, address):
+ split = self.colbits - self.address_align
+ if isinstance(address, int):
+ return address >> split
+ else:
+ return address[split:]
+
+ def col(self, address):
+ split = self.colbits - self.address_align
+ if isinstance(address, int):
+ return (address & (2**split - 1)) << self.address_align
+ else:
+ return Cat(Replicate(0, self.address_align), address[:split])
+
+
+class BankMachine(Module):
+ def __init__(self, geom_settings, timing_settings, controller_settings, address_align, bankn, req):
+ self.refresh_req = Signal()
+ self.refresh_gnt = Signal()
+ self.cmd = CommandRequestRW(geom_settings.addressbits, geom_settings.bankbits)
+
+ ###
+
+ # Request FIFO
+ self.submodules.req_fifo = SyncFIFO([("we", 1), ("adr", flen(req.adr))],
+ controller_settings.req_queue_size)
+ self.comb += [
+ self.req_fifo.din.we.eq(req.we),
+ self.req_fifo.din.adr.eq(req.adr),
+ self.req_fifo.we.eq(req.stb),
+ req.req_ack.eq(self.req_fifo.writable),
+
+ self.req_fifo.re.eq(req.dat_w_ack | req.dat_r_ack),
+ req.lock.eq(self.req_fifo.readable)
+ ]
+ reqf = self.req_fifo.dout
+
+ slicer = _AddressSlicer(geom_settings.colbits, address_align)
+
+ # Row tracking
+ has_openrow = Signal()
+ openrow = Signal(geom_settings.rowbits)
+ hit = Signal()
+ self.comb += hit.eq(openrow == slicer.row(reqf.adr))
+ track_open = Signal()
+ track_close = Signal()
+ self.sync += [
+ If(track_open,
+ has_openrow.eq(1),
+ openrow.eq(slicer.row(reqf.adr))
+ ),
+ If(track_close,
+ has_openrow.eq(0)
+ )
+ ]
+
+ # Address generation
+ s_row_adr = Signal()
+ self.comb += [
+ self.cmd.ba.eq(bankn),
+ If(s_row_adr,
+ self.cmd.a.eq(slicer.row(reqf.adr))
+ ).Else(
+ self.cmd.a.eq(slicer.col(reqf.adr))
+ )
+ ]
+
+ # Respect write-to-precharge specification
+ precharge_ok = Signal()
+ t_unsafe_precharge = 2 + timing_settings.tWR - 1
+ unsafe_precharge_count = Signal(max=t_unsafe_precharge+1)
+ self.comb += precharge_ok.eq(unsafe_precharge_count == 0)
+ self.sync += [
+ If(self.cmd.stb & self.cmd.ack & self.cmd.is_write,
+ unsafe_precharge_count.eq(t_unsafe_precharge)
+ ).Elif(~precharge_ok,
+ unsafe_precharge_count.eq(unsafe_precharge_count-1)
+ )
+ ]
+
+ # Control and command generation FSM
+ fsm = FSM()
+ self.submodules += fsm
+ fsm.act("REGULAR",
+ If(self.refresh_req,
+ NextState("REFRESH")
+ ).Elif(self.req_fifo.readable,
+ If(has_openrow,
+ If(hit,
+ # NB: write-to-read specification is enforced by multiplexer
+ self.cmd.stb.eq(1),
+ req.dat_w_ack.eq(self.cmd.ack & reqf.we),
+ req.dat_r_ack.eq(self.cmd.ack & ~reqf.we),
+ self.cmd.is_read.eq(~reqf.we),
+ self.cmd.is_write.eq(reqf.we),
+ self.cmd.cas_n.eq(0),
+ self.cmd.we_n.eq(~reqf.we)
+ ).Else(
+ NextState("PRECHARGE")
+ )
+ ).Else(
+ NextState("ACTIVATE")
+ )
+ )
+ )
+ fsm.act("PRECHARGE",
+ # Notes:
+ # 1. we are presenting the column address, A10 is always low
+ # 2. since we always go to the ACTIVATE state, we do not need
+ # to assert track_close.
+ If(precharge_ok,
+ self.cmd.stb.eq(1),
+ If(self.cmd.ack, NextState("TRP")),
+ self.cmd.ras_n.eq(0),
+ self.cmd.we_n.eq(0),
+ self.cmd.is_cmd.eq(1)
+ )
+ )
+ fsm.act("ACTIVATE",
+ s_row_adr.eq(1),
+ track_open.eq(1),
+ self.cmd.stb.eq(1),
+ self.cmd.is_cmd.eq(1),
+ If(self.cmd.ack, NextState("TRCD")),
+ self.cmd.ras_n.eq(0)
+ )
+ fsm.act("REFRESH",
+ self.refresh_gnt.eq(precharge_ok),
+ track_close.eq(1),
+ self.cmd.is_cmd.eq(1),
+ If(~self.refresh_req, NextState("REGULAR"))
+ )
+ fsm.delayed_enter("TRP", "ACTIVATE", timing_settings.tRP-1)
+ fsm.delayed_enter("TRCD", "REGULAR", timing_settings.tRCD-1)
--- /dev/null
+from migen import *
+
+from misoc.mem.sdram.phy import dfi
+from misoc.mem.sdram.core import lasmibus
+from misoc.mem.sdram.core.lasmicon.refresher import *
+from misoc.mem.sdram.core.lasmicon.bankmachine import *
+from misoc.mem.sdram.core.lasmicon.multiplexer import *
+
+
+class LASMIconSettings:
+ def __init__(self, req_queue_size=8,
+ read_time=32, write_time=16,
+ l2_size=8192,
+ with_bandwidth=False,
+ with_memtest=False,
+ with_refresh=True):
+ self.req_queue_size = req_queue_size
+ self.read_time = read_time
+ self.write_time = write_time
+ self.l2_size = l2_size
+ if with_memtest:
+ self.with_bandwidth = True
+ else:
+ self.with_bandwidth = with_bandwidth
+ self.with_memtest = with_memtest
+ self.with_refresh = with_refresh
+
+
+class LASMIcon(Module):
+ def __init__(self, phy_settings, geom_settings, timing_settings, controller_settings, **kwargs):
+ if phy_settings.memtype in ["SDR"]:
+ burst_length = phy_settings.nphases*1 # command multiplication*SDR
+ elif phy_settings.memtype in ["DDR", "LPDDR", "DDR2", "DDR3"]:
+ burst_length = phy_settings.nphases*2 # command multiplication*DDR
+ address_align = log2_int(burst_length)
+
+ self.dfi = dfi.Interface(geom_settings.addressbits,
+ geom_settings.bankbits,
+ phy_settings.dfi_databits,
+ phy_settings.nphases)
+ self.lasmic = lasmibus.Interface(
+ aw=geom_settings.rowbits + geom_settings.colbits - address_align,
+ dw=phy_settings.dfi_databits*phy_settings.nphases,
+ nbanks=2**geom_settings.bankbits,
+ req_queue_size=controller_settings.req_queue_size,
+ read_latency=phy_settings.read_latency+1,
+ write_latency=phy_settings.write_latency+1)
+ self.nrowbits = geom_settings.colbits - address_align
+
+ ###
+
+ self.submodules.refresher = Refresher(geom_settings.addressbits, geom_settings.bankbits,
+ timing_settings.tRP, timing_settings.tREFI, timing_settings.tRFC, enabled=controller_settings.with_refresh)
+ self.submodules.bank_machines = [BankMachine(geom_settings, timing_settings, controller_settings, address_align, i,
+ getattr(self.lasmic, "bank"+str(i)))
+ for i in range(2**geom_settings.bankbits)]
+ self.submodules.multiplexer = Multiplexer(phy_settings, geom_settings, timing_settings, controller_settings,
+ self.bank_machines, self.refresher,
+ self.dfi, self.lasmic,
+ **kwargs)
+
+ def get_csrs(self):
+ return self.multiplexer.get_csrs()
--- /dev/null
+from migen import *
+from migen.genlib.roundrobin import *
+from migen.genlib.misc import optree
+from migen.genlib.fsm import FSM, NextState
+from migen.bank.description import AutoCSR
+
+from misoc.mem.sdram.core.lasmicon.perf import Bandwidth
+
+
+class CommandRequest:
+ def __init__(self, a, ba):
+ self.a = Signal(a)
+ self.ba = Signal(ba)
+ self.cas_n = Signal(reset=1)
+ self.ras_n = Signal(reset=1)
+ self.we_n = Signal(reset=1)
+
+
+class CommandRequestRW(CommandRequest):
+ def __init__(self, a, ba):
+ CommandRequest.__init__(self, a, ba)
+ self.stb = Signal()
+ self.ack = Signal()
+ self.is_cmd = Signal()
+ self.is_read = Signal()
+ self.is_write = Signal()
+
+
+class _CommandChooser(Module):
+ def __init__(self, requests):
+ self.want_reads = Signal()
+ self.want_writes = Signal()
+ self.want_cmds = Signal()
+ # NB: cas_n/ras_n/we_n are 1 when stb is inactive
+ self.cmd = CommandRequestRW(flen(requests[0].a), flen(requests[0].ba))
+
+ ###
+
+ rr = RoundRobin(len(requests), SP_CE)
+ self.submodules += rr
+
+ self.comb += [rr.request[i].eq(req.stb & ((req.is_cmd & self.want_cmds) | ((req.is_read == self.want_reads) | (req.is_write == self.want_writes))))
+ for i, req in enumerate(requests)]
+
+ stb = Signal()
+ self.comb += stb.eq(Array(req.stb for req in requests)[rr.grant])
+ for name in ["a", "ba", "is_read", "is_write", "is_cmd"]:
+ choices = Array(getattr(req, name) for req in requests)
+ self.comb += getattr(self.cmd, name).eq(choices[rr.grant])
+ for name in ["cas_n", "ras_n", "we_n"]:
+ # we should only assert those signals when stb is 1
+ choices = Array(getattr(req, name) for req in requests)
+ self.comb += If(self.cmd.stb, getattr(self.cmd, name).eq(choices[rr.grant]))
+ self.comb += self.cmd.stb.eq(stb \
+ & ((self.cmd.is_cmd & self.want_cmds) | ((self.cmd.is_read == self.want_reads) \
+ & (self.cmd.is_write == self.want_writes))))
+
+ self.comb += [If(self.cmd.stb & self.cmd.ack & (rr.grant == i), req.ack.eq(1))
+ for i, req in enumerate(requests)]
+ self.comb += rr.ce.eq(self.cmd.ack)
+
+
+class _Steerer(Module):
+ def __init__(self, commands, dfi):
+ ncmd = len(commands)
+ nph = len(dfi.phases)
+ self.sel = [Signal(max=ncmd) for i in range(nph)]
+
+ ###
+
+ def stb_and(cmd, attr):
+ if not hasattr(cmd, "stb"):
+ return 0
+ else:
+ return cmd.stb & getattr(cmd, attr)
+ for phase, sel in zip(dfi.phases, self.sel):
+ self.comb += [
+ phase.cke.eq(1),
+ phase.cs_n.eq(0)
+ ]
+ if hasattr(phase, "odt"):
+ self.comb += phase.odt.eq(1)
+ if hasattr(phase, "reset_n"):
+ self.comb += phase.reset_n.eq(1)
+ self.sync += [
+ phase.address.eq(Array(cmd.a for cmd in commands)[sel]),
+ phase.bank.eq(Array(cmd.ba for cmd in commands)[sel]),
+ phase.cas_n.eq(Array(cmd.cas_n for cmd in commands)[sel]),
+ phase.ras_n.eq(Array(cmd.ras_n for cmd in commands)[sel]),
+ phase.we_n.eq(Array(cmd.we_n for cmd in commands)[sel]),
+ phase.rddata_en.eq(Array(stb_and(cmd, "is_read") for cmd in commands)[sel]),
+ phase.wrdata_en.eq(Array(stb_and(cmd, "is_write") for cmd in commands)[sel])
+ ]
+
+
+class Multiplexer(Module, AutoCSR):
+ def __init__(self, phy_settings, geom_settings, timing_settings, controller_settings, bank_machines, refresher, dfi, lasmic,
+ with_bandwidth=False):
+ assert(phy_settings.nphases == len(dfi.phases))
+ self.phy_settings = phy_settings
+
+ # Command choosing
+ requests = [bm.cmd for bm in bank_machines]
+ self.submodules.choose_cmd = choose_cmd = _CommandChooser(requests)
+ self.submodules.choose_req = choose_req = _CommandChooser(requests)
+ self.comb += [
+ choose_cmd.want_reads.eq(0),
+ choose_cmd.want_writes.eq(0)
+ ]
+ if phy_settings.nphases == 1:
+ self.comb += [
+ choose_cmd.want_cmds.eq(1),
+ choose_req.want_cmds.eq(1)
+ ]
+
+ # Command steering
+ nop = CommandRequest(geom_settings.addressbits, geom_settings.bankbits)
+ commands = [nop, choose_cmd.cmd, choose_req.cmd, refresher.cmd] # nop must be 1st
+ (STEER_NOP, STEER_CMD, STEER_REQ, STEER_REFRESH) = range(4)
+ steerer = _Steerer(commands, dfi)
+ self.submodules += steerer
+
+ # Read/write turnaround
+ read_available = Signal()
+ write_available = Signal()
+ self.comb += [
+ read_available.eq(optree("|", [req.stb & req.is_read for req in requests])),
+ write_available.eq(optree("|", [req.stb & req.is_write for req in requests]))
+ ]
+
+ def anti_starvation(timeout):
+ en = Signal()
+ max_time = Signal()
+ if timeout:
+ t = timeout - 1
+ time = Signal(max=t+1)
+ self.comb += max_time.eq(time == 0)
+ self.sync += If(~en,
+ time.eq(t)
+ ).Elif(~max_time,
+ time.eq(time - 1)
+ )
+ else:
+ self.comb += max_time.eq(0)
+ return en, max_time
+ read_time_en, max_read_time = anti_starvation(controller_settings.read_time)
+ write_time_en, max_write_time = anti_starvation(controller_settings.write_time)
+
+ # Refresh
+ self.comb += [bm.refresh_req.eq(refresher.req) for bm in bank_machines]
+ go_to_refresh = Signal()
+ self.comb += go_to_refresh.eq(optree("&", [bm.refresh_gnt for bm in bank_machines]))
+
+ # Datapath
+ all_rddata = [p.rddata for p in dfi.phases]
+ all_wrdata = [p.wrdata for p in dfi.phases]
+ all_wrdata_mask = [p.wrdata_mask for p in dfi.phases]
+ self.comb += [
+ lasmic.dat_r.eq(Cat(*all_rddata)),
+ Cat(*all_wrdata).eq(lasmic.dat_w),
+ Cat(*all_wrdata_mask).eq(~lasmic.dat_we)
+ ]
+
+ # Control FSM
+ fsm = FSM()
+ self.submodules += fsm
+
+ def steerer_sel(steerer, phy_settings, r_w_n):
+ r = []
+ for i in range(phy_settings.nphases):
+ s = steerer.sel[i].eq(STEER_NOP)
+ if r_w_n == "read":
+ if i == phy_settings.rdphase:
+ s = steerer.sel[i].eq(STEER_REQ)
+ elif i == phy_settings.rdcmdphase:
+ s = steerer.sel[i].eq(STEER_CMD)
+ elif r_w_n == "write":
+ if i == phy_settings.wrphase:
+ s = steerer.sel[i].eq(STEER_REQ)
+ elif i == phy_settings.wrcmdphase:
+ s = steerer.sel[i].eq(STEER_CMD)
+ else:
+ raise ValueError
+ r.append(s)
+ return r
+
+ fsm.act("READ",
+ read_time_en.eq(1),
+ choose_req.want_reads.eq(1),
+ choose_cmd.cmd.ack.eq(1),
+ choose_req.cmd.ack.eq(1),
+ steerer_sel(steerer, phy_settings, "read"),
+ If(write_available,
+ # TODO: switch only after several cycles of ~read_available?
+ If(~read_available | max_read_time, NextState("RTW"))
+ ),
+ If(go_to_refresh, NextState("REFRESH"))
+ )
+ fsm.act("WRITE",
+ write_time_en.eq(1),
+ choose_req.want_writes.eq(1),
+ choose_cmd.cmd.ack.eq(1),
+ choose_req.cmd.ack.eq(1),
+ steerer_sel(steerer, phy_settings, "write"),
+ If(read_available,
+ If(~write_available | max_write_time, NextState("WTR"))
+ ),
+ If(go_to_refresh, NextState("REFRESH"))
+ )
+ fsm.act("REFRESH",
+ steerer.sel[0].eq(STEER_REFRESH),
+ If(~refresher.req, NextState("READ"))
+ )
+ fsm.delayed_enter("RTW", "WRITE", phy_settings.read_latency-1) # FIXME: reduce this, actual limit is around (cl+1)/nphases
+ fsm.delayed_enter("WTR", "READ", timing_settings.tWTR-1)
+ # FIXME: workaround for zero-delay loop simulation problem with Icarus Verilog
+ fsm.finalize()
+ self.comb += refresher.ack.eq(fsm.state == fsm.encoding["REFRESH"])
+
+ self.with_bandwidth = with_bandwidth
+
+ def add_bandwidth(self):
+ self.with_bandwidth = True
+
+ def do_finalize(self):
+ if self.with_bandwidth:
+ data_width = self.phy_settings.dfi_databits*self.phy_settings.nphases
+ self.submodules.bandwidth = Bandwidth(self.choose_req.cmd, data_width)
--- /dev/null
+from migen import *
+from migen.bank.description import *
+
+
+class Bandwidth(Module, AutoCSR):
+ def __init__(self, cmd, data_width, period_bits=24):
+ self._update = CSR()
+ self._nreads = CSRStatus(period_bits)
+ self._nwrites = CSRStatus(period_bits)
+ self._data_width = CSRStatus(bits_for(data_width), reset=data_width)
+
+ ###
+
+ cmd_stb = Signal()
+ cmd_ack = Signal()
+ cmd_is_read = Signal()
+ cmd_is_write = Signal()
+ self.sync += [
+ cmd_stb.eq(cmd.stb),
+ cmd_ack.eq(cmd.ack),
+ cmd_is_read.eq(cmd.is_read),
+ cmd_is_write.eq(cmd.is_write)
+ ]
+
+ counter = Signal(period_bits)
+ period = Signal()
+ nreads = Signal(period_bits)
+ nwrites = Signal(period_bits)
+ nreads_r = Signal(period_bits)
+ nwrites_r = Signal(period_bits)
+ self.sync += [
+ Cat(counter, period).eq(counter + 1),
+ If(period,
+ nreads_r.eq(nreads),
+ nwrites_r.eq(nwrites),
+ nreads.eq(0),
+ nwrites.eq(0)
+ ).Elif(cmd_stb & cmd_ack,
+ If(cmd_is_read, nreads.eq(nreads + 1)),
+ If(cmd_is_write, nwrites.eq(nwrites + 1)),
+ ),
+ If(self._update.re,
+ self._nreads.status.eq(nreads_r),
+ self._nwrites.status.eq(nwrites_r)
+ )
+ ]
--- /dev/null
+from migen import *
+from migen.genlib.misc import timeline
+from migen.genlib.fsm import FSM
+
+from misoc.mem.sdram.core.lasmicon.multiplexer import *
+
+
+class Refresher(Module):
+ def __init__(self, a, ba, tRP, tREFI, tRFC, enabled=True):
+ self.req = Signal()
+ self.ack = Signal() # 1st command 1 cycle after assertion of ack
+ self.cmd = CommandRequest(a, ba)
+
+ ###
+
+ if enabled:
+ # Refresh sequence generator:
+ # PRECHARGE ALL --(tRP)--> AUTO REFRESH --(tRFC)--> done
+ seq_start = Signal()
+ seq_done = Signal()
+ self.sync += [
+ self.cmd.a.eq(2**10),
+ self.cmd.ba.eq(0),
+ self.cmd.cas_n.eq(1),
+ self.cmd.ras_n.eq(1),
+ self.cmd.we_n.eq(1),
+ seq_done.eq(0)
+ ]
+ self.sync += timeline(seq_start, [
+ (1, [
+ self.cmd.ras_n.eq(0),
+ self.cmd.we_n.eq(0)
+ ]),
+ (1+tRP, [
+ self.cmd.cas_n.eq(0),
+ self.cmd.ras_n.eq(0)
+ ]),
+ (1+tRP+tRFC, [
+ seq_done.eq(1)
+ ])
+ ])
+
+ # Periodic refresh counter
+ counter = Signal(max=tREFI)
+ start = Signal()
+ self.sync += [
+ start.eq(0),
+ If(counter == 0,
+ start.eq(1),
+ counter.eq(tREFI - 1)
+ ).Else(
+ counter.eq(counter - 1)
+ )
+ ]
+
+ # Control FSM
+ fsm = FSM()
+ self.submodules += fsm
+ fsm.act("IDLE", If(start, NextState("WAIT_GRANT")))
+ fsm.act("WAIT_GRANT",
+ self.req.eq(1),
+ If(self.ack,
+ seq_start.eq(1),
+ NextState("WAIT_SEQ")
+ )
+ )
+ fsm.act("WAIT_SEQ",
+ self.req.eq(1),
+ If(seq_done, NextState("IDLE"))
+ )
--- /dev/null
+from migen import *
+from migen.sim.generic import run_simulation
+
+from misoc.mem.sdram.code import lasmibus
+from misoc.mem.sdram.core.lasmicon.bankmachine import *
+
+from test_common import sdram_phy, sdram_geom, sdram_timing, CommandLogger
+
+
+def my_generator():
+ for x in range(10):
+ yield True, x
+ for x in range(10):
+ yield False, 128*x
+
+
+class TB(Module):
+ def __init__(self):
+ self.req = Interface(32, 32, 1,
+ sdram_timing.req_queue_size, sdram_phy.read_latency, sdram_phy.write_latency)
+ self.submodules.dut = BankMachine(sdram_geom, sdram_timing, 2, 0, self.req)
+ self.submodules.logger = CommandLogger(self.dut.cmd, True)
+ self.generator = my_generator()
+ self.dat_ack_cnt = 0
+
+ def do_simulation(self, selfp):
+ if selfp.req.dat_ack:
+ self.dat_ack_cnt += 1
+ if selfp.req.req_ack:
+ try:
+ we, adr = next(self.generator)
+ except StopIteration:
+ selfp.req.stb = 0
+ if not selfp.req.lock:
+ print("data ack count: {0}".format(self.dat_ack_cnt))
+ raise StopSimulation
+ return
+ selfp.req.adr = adr
+ selfp.req.we = we
+ selfp.req.stb = 1
+
+if __name__ == "__main__":
+ run_simulation(TB(), vcd_name="my.vcd")
--- /dev/null
+from fractions import Fraction
+from math import ceil
+
+from migen import *
+
+from misoc import sdram
+
+MHz = 1000000
+clk_freq = (83 + Fraction(1, 3))*MHz
+
+clk_period_ns = 1000000000/clk_freq
+
+
+def ns(t, margin=True):
+ if margin:
+ t += clk_period_ns/2
+ return ceil(t/clk_period_ns)
+
+sdram_phy = sdram.PhySettings(
+ memtype="DDR",
+ dfi_databits=64,
+ nphases=2,
+ rdphase=0,
+ wrphase=1,
+ rdcmdphase=1,
+ wrcmdphase=0,
+ cl=3,
+ read_latency=5,
+ write_latency=0
+)
+
+sdram_geom = sdram.GeomSettings(
+ bankbits=2,
+ rowbits=13,
+ colbits=10
+)
+sdram_timing = sdram.TimingSettings(
+ tRP=ns(15),
+ tRCD=ns(15),
+ tWR=ns(15),
+ tWTR=2,
+ tREFI=ns(7800, False),
+ tRFC=ns(70),
+
+ req_queue_size=8,
+ read_time=32,
+ write_time=16
+)
+
+
+def decode_sdram(ras_n, cas_n, we_n, bank, address):
+ elts = []
+ if not ras_n and cas_n and we_n:
+ elts.append("ACTIVATE")
+ elts.append("BANK " + str(bank))
+ elts.append("ROW " + str(address))
+ elif ras_n and not cas_n and we_n:
+ elts.append("READ\t")
+ elts.append("BANK " + str(bank))
+ elts.append("COL " + str(address))
+ elif ras_n and not cas_n and not we_n:
+ elts.append("WRITE\t")
+ elts.append("BANK " + str(bank))
+ elts.append("COL " + str(address))
+ elif ras_n and cas_n and not we_n:
+ elts.append("BST")
+ elif not ras_n and not cas_n and we_n:
+ elts.append("AUTO REFRESH")
+ elif not ras_n and cas_n and not we_n:
+ elts.append("PRECHARGE")
+ if address & 2**10:
+ elts.append("ALL")
+ else:
+ elts.append("BANK " + str(bank))
+ elif not ras_n and not cas_n and not we_n:
+ elts.append("LMR")
+ return elts
+
+
+class CommandLogger(Module):
+ def __init__(self, cmd, rw=False):
+ self.cmd = cmd
+ if rw:
+ self.comb += self.cmd.ack.eq(1)
+
+ def do_simulation(self, selfp):
+ elts = ["@" + str(selfp.simulator.cycle_counter)]
+ cmdp = selfp.cmd
+ elts += decode_sdram(cmdp.ras_n, cmdp.cas_n, cmdp.we_n, cmdp.ba, cmdp.a)
+ if len(elts) > 1:
+ print("\t".join(elts))
+ do_simulation.passive = True
+
+
+class DFILogger(Module):
+ def __init__(self, dfi):
+ self.dfi = dfi
+
+ def do_simulation(self, selfp):
+ dfip = selfp.dfi
+ for i, p in enumerate(dfip.phases):
+ elts = ["@" + str(selfp.simulator.cycle_counter) + ":" + str(i)]
+ elts += decode_sdram(p.ras_n, p.cas_n, p.we_n, p.bank, p.address)
+ if len(elts) > 1:
+ print("\t".join(elts))
+ do_simulation.passive = True
--- /dev/null
+from migen import *
+from migen.sim.generic import run_simulation
+
+from misoc.mem.sdram.core import lasmibus
+from misoc.mem.sdram.core.lasmicon import *
+from misoc.mem.sdram.frontend import dma_lasmi
+
+from test_common import sdram_phy, sdram_geom, sdram_timing, DFILogger
+
+
+class TB(Module):
+ def __init__(self):
+ self.submodules.ctler = LASMIcon(sdram_phy, sdram_geom, sdram_timing)
+ self.submodules.xbar = lasmibus.Crossbar([self.ctler.lasmic], self.ctler.nrowbits)
+ self.submodules.logger = DFILogger(self.ctler.dfi)
+ self.submodules.writer = dma_lasmi.Writer(self.xbar.get_master())
+
+ self.comb += self.writer.address_data.stb.eq(1)
+ pl = self.writer.address_data.payload
+ pl.a.reset = 255
+ pl.d.reset = pl.a.reset*2
+ self.sync += If(self.writer.address_data.ack,
+ pl.a.eq(pl.a + 1),
+ pl.d.eq(pl.d + 2)
+ )
+ self.open_row = None
+
+ def do_simulation(self, selfp):
+ dfip = selfp.ctler.dfi
+ for p in dfip.phases:
+ if p.ras_n and not p.cas_n and not p.we_n: # write
+ d = dfip.phases[0].wrdata | (dfip.phases[1].wrdata << 64)
+ print(d)
+ if d != p.address//2 + p.bank*512 + self.open_row*2048:
+ print("**** ERROR ****")
+ elif not p.ras_n and p.cas_n and p.we_n: # activate
+ self.open_row = p.address
+
+if __name__ == "__main__":
+ run_simulation(TB(), ncycles=3500, vcd_name="my.vcd")
--- /dev/null
+from migen import *
+from migen.sim.generic import run_simulation
+
+from misoc.mem.sdram.core import lasmibus
+from misoc.mem.sdram.core.lasmicon import *
+
+from test_common import sdram_phy, sdram_geom, sdram_timing, DFILogger
+
+
+def my_generator_r(n):
+ for x in range(10):
+ t = TRead(128*n + 48*n*x)
+ yield t
+ print("{0:3}: reads done".format(n))
+
+
+def my_generator_w(n):
+ for x in range(10):
+ t = TWrite(128*n + 48*n*x, x)
+ yield t
+ print("{0:3}: writes done".format(n))
+
+
+def my_generator(n):
+ if n % 2:
+ return my_generator_w(n // 2)
+ else:
+ return my_generator_r(n // 2)
+
+
+class TB(Module):
+ def __init__(self):
+ self.submodules.dut = LASMIcon(sdram_phy, sdram_geom, sdram_timing)
+ self.submodules.xbar = lasmibus.Crossbar([self.dut.lasmic], self.dut.nrowbits)
+ self.submodules.logger = DFILogger(self.dut.dfi)
+
+ masters = [self.xbar.get_master() for i in range(6)]
+ self.initiators = [Initiator(my_generator(n), master)
+ for n, master in enumerate(masters)]
+ self.submodules += self.initiators
+
+if __name__ == "__main__":
+ run_simulation(TB(), vcd_name="my.vcd")
--- /dev/null
+from random import Random
+
+from migen import *
+from migen.sim.generic import run_simulation
+
+from misoc.mem.sdram.core.lasmicon.refresher import *
+
+from common import CommandLogger
+
+
+class Granter(Module):
+ def __init__(self, req, ack):
+ self.req = req
+ self.ack = ack
+ self.state = 0
+ self.prng = Random(92837)
+
+ def do_simulation(self, selfp):
+ elts = ["@" + str(selfp.simulator.cycle_counter)]
+
+ if self.state == 0:
+ if selfp.req:
+ elts.append("Refresher requested access")
+ self.state = 1
+ elif self.state == 1:
+ if self.prng.randrange(0, 5) == 0:
+ elts.append("Granted access to refresher")
+ selfp.ack = 1
+ self.state = 2
+ elif self.state == 2:
+ if not selfp.req:
+ elts.append("Refresher released access")
+ selfp.ack = 0
+ self.state = 0
+
+ if len(elts) > 1:
+ print("\t".join(elts))
+
+
+class TB(Module):
+ def __init__(self):
+ self.submodules.dut = Refresher(13, 2, tRP=3, tREFI=100, tRFC=5)
+ self.submodules.logger = CommandLogger(self.dut.cmd)
+ self.submodules.granter = Granter(self.dut.req, self.dut.ack)
+
+if __name__ == "__main__":
+ run_simulation(TB(), ncycles=400)
--- /dev/null
+from migen import *
+from migen.bus import wishbone
+from migen.bus.transactions import *
+from migen.sim.generic import run_simulation
+
+from misoc.mem.sdram.core import lasmibus
+from misoc.mem.sdram.core.lasmicon import *
+from misoc.mem.sdram.frontend import wishbone2lasmi
+
+from test_common import sdram_phy, sdram_geom, sdram_timing, DFILogger
+
+l2_size = 8192 # in bytes
+
+
+def my_generator():
+ for x in range(20):
+ t = TWrite(x, x)
+ yield t
+ print(str(t) + " delay=" + str(t.latency))
+ for x in range(20):
+ t = TRead(x)
+ yield t
+ print(str(t) + " delay=" + str(t.latency))
+ for x in range(20):
+ t = TRead(x+l2_size//4)
+ yield t
+ print(str(t) + " delay=" + str(t.latency))
+
+
+class TB(Module):
+ def __init__(self):
+ self.submodules.ctler = LASMIcon(sdram_phy, sdram_geom, sdram_timing)
+ self.submodules.xbar = lasmibus.Crossbar([self.ctler.lasmic], self.ctler.nrowbits)
+ self.submodules.logger = DFILogger(self.ctler.dfi)
+ self.submodules.bridge = wishbone2lasmi.WB2LASMI(l2_size//4, self.xbar.get_master())
+ self.submodules.initiator = wishbone.Initiator(my_generator())
+ self.submodules.conn = wishbone.InterconnectPointToPoint(self.initiator.bus, self.bridge.wishbone)
+
+if __name__ == "__main__":
+ run_simulation(TB(), vcd_name="my.vcd")
--- /dev/null
+Unless otherwise noted, LiteEth is copyright (C) 2015 Florent Kermarrec.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+Other authors retain ownership of their contributions. If a submission can
+reasonably be considered independently copyrightable, it's yours and we
+encourage you to claim it with appropriate copyright notices. This submission
+then falls under the "otherwise noted" category. All submissions are strongly
+encouraged to use the two-clause BSD license reproduced above.
--- /dev/null
+ __ _ __ ______ __ __ ____ _
+ / / (_) /____ / __/ /_/ / / |/ (_)__ (_)
+ / /__/ / __/ -_) _// __/ _ \/ /|_/ / / _ \/ /
+ /____/_/\__/\__/___/\__/_//_/_/ /_/_/_//_/_/
+
+ Copyright 2012-2015 / EnjoyDigital / M-Labs Ltd
+
+ A small footprint and configurable minimal Ethernet core
+ powered by Migen
+
+[> Intro
+---------
+LiteEthMini is a subset of LiteEth (https://github.com/enjoy-digital/liteeth)
+intended to be used with a CPU and a software stack.
+
+[> Features
+-----------
+- Ethernet MAC with various various PHYs (GMII, MII, RGMII, Loopback)
+- SRAM storage and wishbone interface
+
+[> Possible improvements
+-------------------------
+- add DMA interface to MAC
+- add SGMII PHY
+- ... See below Support and consulting :)
+
+If you want to support these features, please contact us at florent [AT]
+enjoy-digital.fr. You can also contact our partner on the public mailing list
+devel [AT] lists.m-labs.hk.
+
+[> License
+-----------
+LiteEthMini is released under the very permissive two-clause BSD license. Under
+the terms of this license, you are authorized to use LiteEthMini for closed-source
+proprietary designs.
+Even though we do not require you to do so, those things are awesome, so please
+do them if possible:
+ - tell us that you are using LiteEthMini
+ - cite LiteEthMini in publications related to research it has helped
+ - send us feedback and suggestions for improvements
+ - send us bug reports when something goes wrong
+ - send us the modifications and improvements you have done to LiteEthMini.
+
+[> Support and consulting
+--------------------------
+We love open-source hardware and like sharing our designs with others.
+
+LiteEthMini is mainly developed and maintained by EnjoyDigital.
+
+If you would like to know more about LiteEthMini or if you are already a happy
+user and would like to extend it for your needs, EnjoyDigital can provide standard
+commercial support as well as consulting services.
+
+So feel free to contact us, we'd love to work with you! (and eventually shorten
+the list of the possible improvements :)
+
+[> Contact
+E-mail: florent [AT] enjoy-digital.fr
\ No newline at end of file
--- /dev/null
+import math
+from collections import OrderedDict
+
+from migen import *
+from migen.genlib.resetsync import AsyncResetSynchronizer
+from migen.genlib.record import *
+from migen.genlib.fsm import FSM, NextState
+from migen.genlib.misc import chooser, reverse_bytes, FlipFlop, Counter, WaitTimer
+from migen.flow.actor import *
+from migen.actorlib.structuring import Converter, Pipeline
+from migen.actorlib.fifo import SyncFIFO, AsyncFIFO
+from migen.actorlib.packet import *
+from migen.bank.description import *
+
+class Port:
+ def connect(self, port):
+ r = [
+ Record.connect(self.source, port.sink),
+ Record.connect(port.source, self.sink)
+ ]
+ return r
+
+eth_mtu = 1532
+eth_min_len = 46
+eth_interpacket_gap = 12
+eth_preamble = 0xD555555555555555
+buffer_depth = 2**log2_int(eth_mtu, need_pow2=False)
+
+def eth_phy_description(dw):
+ payload_layout = [
+ ("data", dw),
+ ("last_be", dw//8),
+ ("error", dw//8)
+ ]
+ return EndpointDescription(payload_layout, packetized=True)
+
+
+def eth_mac_description(dw):
+ payload_layout = mac_header.get_layout() + [
+ ("data", dw),
+ ("last_be", dw//8),
+ ("error", dw//8)
+ ]
+ return EndpointDescription(payload_layout, packetized=True)
--- /dev/null
+from misoc.com.liteethmini.common import *
+from misoc.com.liteethmini.mac.core import LiteEthMACCore
+from misoc.com.liteethmini.mac.frontend.wishbone import LiteEthMACWishboneInterface
+
+
+class LiteEthMAC(Module, AutoCSR):
+ def __init__(self, phy, dw,
+ interface="wishbone",
+ endianness="big",
+ with_preamble_crc=True):
+ self.submodules.core = LiteEthMACCore(phy, dw, endianness, with_preamble_crc)
+ self.csrs = []
+ if interface == "wishbone":
+ self.submodules.interface = LiteEthMACWishboneInterface(dw, 2, 2)
+ self.comb += Port.connect(self.interface, self.core)
+ self.ev, self.bus = self.interface.sram.ev, self.interface.bus
+ self.csrs = self.interface.get_csrs() + self.core.get_csrs()
+ else:
+ raise NotImplementedError
+
+ def get_csrs(self):
+ return self.csrs
--- /dev/null
+from misoc.com.liteethmini.common import *
+from misoc.com.liteethmini.mac.core import gap, preamble, crc, padding, last_be
+from misoc.com.liteethmini.phy.sim import LiteEthPHYSim
+from misoc.com.liteethmini.phy.mii import LiteEthPHYMII
+
+
+class LiteEthMACCore(Module, AutoCSR):
+ def __init__(self, phy, dw, endianness="big",
+ with_preamble_crc=True,
+ with_padding=True):
+ if dw < phy.dw:
+ raise ValueError("Core data width({}) must be larger than PHY data width({})".format(dw, phy.dw))
+
+ rx_pipeline = [phy]
+ tx_pipeline = [phy]
+
+ # Interpacket gap
+ tx_gap_inserter = gap.LiteEthMACGap(phy.dw)
+ rx_gap_checker = gap.LiteEthMACGap(phy.dw, ack_on_gap=True)
+ self.submodules += RenameClockDomains(tx_gap_inserter, "eth_tx")
+ self.submodules += RenameClockDomains(rx_gap_checker, "eth_rx")
+
+ tx_pipeline += [tx_gap_inserter]
+ rx_pipeline += [rx_gap_checker]
+
+ # Preamble / CRC
+ if isinstance(phy, LiteEthPHYSim):
+ # In simulation, avoid CRC/Preamble to enable direct connection
+ # to the Ethernet tap.
+ self._preamble_crc = CSRStatus(reset=1)
+ elif with_preamble_crc:
+ self._preamble_crc = CSRStatus(reset=1)
+ # Preamble insert/check
+ preamble_inserter = preamble.LiteEthMACPreambleInserter(phy.dw)
+ preamble_checker = preamble.LiteEthMACPreambleChecker(phy.dw)
+ self.submodules += RenameClockDomains(preamble_inserter, "eth_tx")
+ self.submodules += RenameClockDomains(preamble_checker, "eth_rx")
+
+ # CRC insert/check
+ crc32_inserter = crc.LiteEthMACCRC32Inserter(eth_phy_description(phy.dw))
+ crc32_checker = crc.LiteEthMACCRC32Checker(eth_phy_description(phy.dw))
+ self.submodules += RenameClockDomains(crc32_inserter, "eth_tx")
+ self.submodules += RenameClockDomains(crc32_checker, "eth_rx")
+
+ tx_pipeline += [preamble_inserter, crc32_inserter]
+ rx_pipeline += [preamble_checker, crc32_checker]
+
+ # Padding
+ if with_padding:
+ padding_inserter = padding.LiteEthMACPaddingInserter(phy.dw, 60)
+ padding_checker = padding.LiteEthMACPaddingChecker(phy.dw, 60)
+ self.submodules += RenameClockDomains(padding_inserter, "eth_tx")
+ self.submodules += RenameClockDomains(padding_checker, "eth_rx")
+
+ tx_pipeline += [padding_inserter]
+ rx_pipeline += [padding_checker]
+
+ # Delimiters
+ if dw != 8:
+ tx_last_be = last_be.LiteEthMACTXLastBE(phy.dw)
+ rx_last_be = last_be.LiteEthMACRXLastBE(phy.dw)
+ self.submodules += RenameClockDomains(tx_last_be, "eth_tx")
+ self.submodules += RenameClockDomains(rx_last_be, "eth_rx")
+
+ tx_pipeline += [tx_last_be]
+ rx_pipeline += [rx_last_be]
+
+ # Converters
+ if dw != phy.dw:
+ reverse = endianness == "big"
+ tx_converter = Converter(eth_phy_description(dw),
+ eth_phy_description(phy.dw),
+ reverse=reverse)
+ rx_converter = Converter(eth_phy_description(phy.dw),
+ eth_phy_description(dw),
+ reverse=reverse)
+ self.submodules += RenameClockDomains(tx_converter, "eth_tx")
+ self.submodules += RenameClockDomains(rx_converter, "eth_rx")
+
+ tx_pipeline += [tx_converter]
+ rx_pipeline += [rx_converter]
+
+ # Cross Domain Crossing
+ if isinstance(phy, LiteEthPHYMII):
+ fifo_depth = 8
+ else:
+ fifo_depth = 64
+ tx_cdc = AsyncFIFO(eth_phy_description(dw), fifo_depth)
+ rx_cdc = AsyncFIFO(eth_phy_description(dw), fifo_depth)
+ self.submodules += RenameClockDomains(tx_cdc, {"write": "sys", "read": "eth_tx"})
+ self.submodules += RenameClockDomains(rx_cdc, {"write": "eth_rx", "read": "sys"})
+
+ tx_pipeline += [tx_cdc]
+ rx_pipeline += [rx_cdc]
+
+ # Graph
+ self.submodules.tx_pipeline = Pipeline(*reversed(tx_pipeline))
+ self.submodules.rx_pipeline = Pipeline(*rx_pipeline)
+
+ self.sink, self.source = self.tx_pipeline.sink, self.rx_pipeline.source
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthMACCRCEngine(Module):
+ """Cyclic Redundancy Check Engine
+
+ Compute next CRC value from last CRC value and data input using
+ an optimized asynchronous LFSR.
+
+ Parameters
+ ----------
+ data_width : int
+ Width of the data bus.
+ width : int
+ Width of the CRC.
+ polynom : int
+ Polynom of the CRC (ex: 0x04C11DB7 for IEEE 802.3 CRC)
+
+ Attributes
+ ----------
+ data : in
+ Data input.
+ last : in
+ last CRC value.
+ next :
+ next CRC value.
+ """
+ def __init__(self, data_width, width, polynom):
+ self.data = Signal(data_width)
+ self.last = Signal(width)
+ self.next = Signal(width)
+
+ # # #
+
+ def _optimize_eq(l):
+ """
+ Replace even numbers of XORs in the equation
+ with an equivalent XOR
+ """
+ d = OrderedDict()
+ for e in l:
+ if e in d:
+ d[e] += 1
+ else:
+ d[e] = 1
+ r = []
+ for key, value in d.items():
+ if value%2 != 0:
+ r.append(key)
+ return r
+
+ # compute and optimize CRC's LFSR
+ curval = [[("state", i)] for i in range(width)]
+ for i in range(data_width):
+ feedback = curval.pop() + [("din", i)]
+ for j in range(width-1):
+ if (polynom & (1<<(j+1))):
+ curval[j] += feedback
+ curval[j] = _optimize_eq(curval[j])
+ curval.insert(0, feedback)
+
+ # implement logic
+ for i in range(width):
+ xors = []
+ for t, n in curval[i]:
+ if t == "state":
+ xors += [self.last[n]]
+ elif t == "din":
+ xors += [self.data[n]]
+ self.comb += self.next[i].eq(optree("^", xors))
+
+
+@DecorateModule(InsertReset)
+@DecorateModule(InsertCE)
+class LiteEthMACCRC32(Module):
+ """IEEE 802.3 CRC
+
+ Implement an IEEE 802.3 CRC generator/checker.
+
+ Parameters
+ ----------
+ data_width : int
+ Width of the data bus.
+
+ Attributes
+ ----------
+ d : in
+ Data input.
+ value : out
+ CRC value (used for generator).
+ error : out
+ CRC error (used for checker).
+ """
+ width = 32
+ polynom = 0x04C11DB7
+ init = 2**width-1
+ check = 0xC704DD7B
+ def __init__(self, data_width):
+ self.data = Signal(data_width)
+ self.value = Signal(self.width)
+ self.error = Signal()
+
+ # # #
+
+ self.submodules.engine = LiteEthMACCRCEngine(data_width, self.width, self.polynom)
+ reg = Signal(self.width, reset=self.init)
+ self.sync += reg.eq(self.engine.next)
+ self.comb += [
+ self.engine.data.eq(self.data),
+ self.engine.last.eq(reg),
+
+ self.value.eq(~reg[::-1]),
+ self.error.eq(self.engine.next != self.check)
+ ]
+
+
+class LiteEthMACCRCInserter(Module):
+ """CRC Inserter
+
+ Append a CRC at the end of each packet.
+
+ Parameters
+ ----------
+ description : description
+ description of the dataflow.
+
+ Attributes
+ ----------
+ sink : in
+ Packets input without CRC.
+ source : out
+ Packets output with CRC.
+ """
+ def __init__(self, crc_class, description):
+ self.sink = sink = Sink(description)
+ self.source = source = Source(description)
+ self.busy = Signal()
+
+ # # #
+
+ dw = flen(sink.data)
+ crc = crc_class(dw)
+ fsm = FSM(reset_state="IDLE")
+ self.submodules += crc, fsm
+
+ fsm.act("IDLE",
+ crc.reset.eq(1),
+ sink.ack.eq(1),
+ If(sink.stb & sink.sop,
+ sink.ack.eq(0),
+ NextState("COPY"),
+ )
+ )
+ fsm.act("COPY",
+ crc.ce.eq(sink.stb & source.ack),
+ crc.data.eq(sink.data),
+ Record.connect(sink, source),
+ source.eop.eq(0),
+ If(sink.stb & sink.eop & source.ack,
+ NextState("INSERT"),
+ )
+ )
+ ratio = crc.width//dw
+ if ratio > 1:
+ cnt = Signal(max=ratio, reset=ratio-1)
+ cnt_done = Signal()
+ fsm.act("INSERT",
+ source.stb.eq(1),
+ chooser(crc.value, cnt, source.data, reverse=True),
+ If(cnt_done,
+ source.eop.eq(1),
+ If(source.ack, NextState("IDLE"))
+ )
+ )
+ self.comb += cnt_done.eq(cnt == 0)
+ self.sync += \
+ If(fsm.ongoing("IDLE"),
+ cnt.eq(cnt.reset)
+ ).Elif(fsm.ongoing("INSERT") & ~cnt_done,
+ cnt.eq(cnt - source.ack)
+ )
+ else:
+ fsm.act("INSERT",
+ source.stb.eq(1),
+ source.eop.eq(1),
+ source.data.eq(crc.value),
+ If(source.ack, NextState("IDLE"))
+ )
+ self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
+
+
+class LiteEthMACCRC32Inserter(LiteEthMACCRCInserter):
+ def __init__(self, description):
+ LiteEthMACCRCInserter.__init__(self, LiteEthMACCRC32, description)
+
+
+class LiteEthMACCRCChecker(Module):
+ """CRC Checker
+
+ Check CRC at the end of each packet.
+
+ Parameters
+ ----------
+ description : description
+ description of the dataflow.
+
+ Attributes
+ ----------
+ sink : in
+ Packets input with CRC.
+ source : out
+ Packets output without CRC and "error" set to 0
+ on eop when CRC OK / set to 1 when CRC KO.
+ """
+ def __init__(self, crc_class, description):
+ self.sink = sink = Sink(description)
+ self.source = source = Source(description)
+ self.busy = Signal()
+
+ # # #
+
+ dw = flen(sink.data)
+ crc = crc_class(dw)
+ self.submodules += crc
+ ratio = crc.width//dw
+
+ error = Signal()
+ fifo = InsertReset(SyncFIFO(description, ratio + 1))
+ self.submodules += fifo
+
+ fsm = FSM(reset_state="RESET")
+ self.submodules += fsm
+
+ fifo_in = Signal()
+ fifo_out = Signal()
+ fifo_full = Signal()
+
+ self.comb += [
+ fifo_full.eq(fifo.fifo.level == ratio),
+ fifo_in.eq(sink.stb & (~fifo_full | fifo_out)),
+ fifo_out.eq(source.stb & source.ack),
+
+ Record.connect(sink, fifo.sink),
+ fifo.sink.stb.eq(fifo_in),
+ self.sink.ack.eq(fifo_in),
+
+ source.stb.eq(sink.stb & fifo_full),
+ source.sop.eq(fifo.source.sop),
+ source.eop.eq(sink.eop),
+ fifo.source.ack.eq(fifo_out),
+ source.payload.eq(fifo.source.payload),
+
+ source.error.eq(sink.error | crc.error),
+ ]
+
+ fsm.act("RESET",
+ crc.reset.eq(1),
+ fifo.reset.eq(1),
+ NextState("IDLE"),
+ )
+ self.comb += crc.data.eq(sink.data)
+ fsm.act("IDLE",
+ If(sink.stb & sink.sop & sink.ack,
+ crc.ce.eq(1),
+ NextState("COPY")
+ )
+ )
+ fsm.act("COPY",
+ If(sink.stb & sink.ack,
+ crc.ce.eq(1),
+ If(sink.eop,
+ NextState("RESET")
+ )
+ )
+ )
+ self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
+
+
+class LiteEthMACCRC32Checker(LiteEthMACCRCChecker):
+ def __init__(self, description):
+ LiteEthMACCRCChecker.__init__(self, LiteEthMACCRC32, description)
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+class LiteEthMACGap(Module):
+ def __init__(self, dw, ack_on_gap=False):
+ self.sink = sink = Sink(eth_phy_description(dw))
+ self.source = source = Source(eth_phy_description(dw))
+
+ # # #
+
+ gap = math.ceil(eth_interpacket_gap/(dw//8))
+ self.submodules.counter = counter = Counter(max=gap)
+
+ self.submodules.fsm = fsm = FSM(reset_state="COPY")
+ fsm.act("COPY",
+ counter.reset.eq(1),
+ Record.connect(sink, source),
+ If(sink.stb & sink.eop & sink.ack,
+ NextState("GAP")
+ )
+ )
+ fsm.act("GAP",
+ counter.ce.eq(1),
+ sink.ack.eq(int(ack_on_gap)),
+ If(counter.value == (gap-1),
+ NextState("COPY")
+ )
+ )
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthMACTXLastBE(Module):
+ def __init__(self, dw):
+ self.sink = sink = Sink(eth_phy_description(dw))
+ self.source = source = Source(eth_phy_description(dw))
+
+ # # #
+
+ ongoing = Signal()
+ self.sync += \
+ If(sink.stb & sink.ack,
+ If(sink.sop,
+ ongoing.eq(1)
+ ).Elif(sink.last_be,
+ ongoing.eq(0)
+ )
+ )
+ self.comb += [
+ source.stb.eq(sink.stb & (sink.sop | ongoing)),
+ source.sop.eq(sink.sop),
+ source.eop.eq(sink.last_be),
+ source.data.eq(sink.data),
+ sink.ack.eq(source.ack)
+ ]
+
+
+class LiteEthMACRXLastBE(Module):
+ def __init__(self, dw):
+ self.sink = sink = Sink(eth_phy_description(dw))
+ self.source = source = Source(eth_phy_description(dw))
+
+ # # #
+
+ self.comb += [
+ source.stb.eq(sink.stb),
+ source.sop.eq(sink.sop),
+ source.eop.eq(sink.eop),
+ source.data.eq(sink.data),
+ source.last_be.eq(sink.eop),
+ sink.ack.eq(source.ack)
+ ]
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthMACPaddingInserter(Module):
+ def __init__(self, dw, padding):
+ self.sink = sink = Sink(eth_phy_description(dw))
+ self.source = source = Source(eth_phy_description(dw))
+
+ # # #
+
+ padding_limit = math.ceil(padding/(dw/8))-1
+
+ self.submodules.counter = counter = Counter(16, reset=1)
+ counter_done = Signal()
+ self.comb += [
+ counter.reset.eq(sink.stb & sink.sop & sink.ack),
+ counter.ce.eq(source.stb & source.ack),
+ counter_done.eq(counter.value >= padding_limit),
+ ]
+
+ self.submodules.fsm = fsm = FSM(reset_state="IDLE")
+ fsm.act("IDLE",
+ Record.connect(sink, source),
+ If(source.stb & source.ack,
+ counter.ce.eq(1),
+ If(sink.eop,
+ If(~counter_done,
+ source.eop.eq(0),
+ NextState("PADDING")
+ )
+ )
+ )
+ )
+ fsm.act("PADDING",
+ source.stb.eq(1),
+ source.eop.eq(counter_done),
+ source.data.eq(0),
+ If(source.ack,
+ If(counter_done,
+ NextState("IDLE")
+ )
+ )
+ )
+
+
+class LiteEthMACPaddingChecker(Module):
+ def __init__(self, dw, packet_min_length):
+ self.sink = sink = Sink(eth_phy_description(dw))
+ self.source = source = Source(eth_phy_description(dw))
+
+ # # #
+
+ # XXX see if we should drop the packet when
+ # payload size < minimum ethernet payload size
+ self.comb += Record.connect(sink, source)
+
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthMACPreambleInserter(Module):
+ def __init__(self, dw):
+ self.sink = Sink(eth_phy_description(dw))
+ self.source = Source(eth_phy_description(dw))
+
+ # # #
+
+ preamble = Signal(64, reset=eth_preamble)
+ cnt_max = (64//dw)-1
+ cnt = Signal(max=cnt_max+1)
+ clr_cnt = Signal()
+ inc_cnt = Signal()
+
+ self.sync += \
+ If(clr_cnt,
+ cnt.eq(0)
+ ).Elif(inc_cnt,
+ cnt.eq(cnt+1)
+ )
+
+ fsm = FSM(reset_state="IDLE")
+ self.submodules += fsm
+ fsm.act("IDLE",
+ self.sink.ack.eq(1),
+ clr_cnt.eq(1),
+ If(self.sink.stb & self.sink.sop,
+ self.sink.ack.eq(0),
+ NextState("INSERT"),
+ )
+ )
+ fsm.act("INSERT",
+ self.source.stb.eq(1),
+ self.source.sop.eq(cnt == 0),
+ chooser(preamble, cnt, self.source.data),
+ If(cnt == cnt_max,
+ If(self.source.ack, NextState("COPY"))
+ ).Else(
+ inc_cnt.eq(self.source.ack)
+ )
+ )
+
+ self.comb += [
+ self.source.data.eq(self.sink.data),
+ self.source.last_be.eq(self.sink.last_be)
+ ]
+ fsm.act("COPY",
+ Record.connect(self.sink, self.source, leave_out=set(["data", "last_be"])),
+ self.source.sop.eq(0),
+
+ If(self.sink.stb & self.sink.eop & self.source.ack,
+ NextState("IDLE"),
+ )
+ )
+
+
+class LiteEthMACPreambleChecker(Module):
+ def __init__(self, dw):
+ self.sink = Sink(eth_phy_description(dw))
+ self.source = Source(eth_phy_description(dw))
+
+ # # #
+
+ preamble = Signal(64, reset=eth_preamble)
+ cnt_max = (64//dw) - 1
+ cnt = Signal(max=cnt_max+1)
+ clr_cnt = Signal()
+ inc_cnt = Signal()
+
+ self.sync += \
+ If(clr_cnt,
+ cnt.eq(0)
+ ).Elif(inc_cnt,
+ cnt.eq(cnt+1)
+ )
+
+ discard = Signal()
+ clr_discard = Signal()
+ set_discard = Signal()
+
+ self.sync += \
+ If(clr_discard,
+ discard.eq(0)
+ ).Elif(set_discard,
+ discard.eq(1)
+ )
+
+ sop = Signal()
+ clr_sop = Signal()
+ set_sop = Signal()
+ self.sync += \
+ If(clr_sop,
+ sop.eq(0)
+ ).Elif(set_sop,
+ sop.eq(1)
+ )
+
+ ref = Signal(dw)
+ match = Signal()
+ self.comb += [
+ chooser(preamble, cnt, ref),
+ match.eq(self.sink.data == ref)
+ ]
+
+ fsm = FSM(reset_state="IDLE")
+ self.submodules += fsm
+
+ fsm.act("IDLE",
+ self.sink.ack.eq(1),
+ clr_cnt.eq(1),
+ clr_discard.eq(1),
+ If(self.sink.stb & self.sink.sop,
+ clr_cnt.eq(0),
+ inc_cnt.eq(1),
+ clr_discard.eq(0),
+ set_discard.eq(~match),
+ NextState("CHECK"),
+ )
+ )
+ fsm.act("CHECK",
+ self.sink.ack.eq(1),
+ If(self.sink.stb,
+ set_discard.eq(~match),
+ If(cnt == cnt_max,
+ If(discard | (~match),
+ NextState("IDLE")
+ ).Else(
+ set_sop.eq(1),
+ NextState("COPY")
+ )
+ ).Else(
+ inc_cnt.eq(1)
+ )
+ )
+ )
+ self.comb += [
+ self.source.data.eq(self.sink.data),
+ self.source.last_be.eq(self.sink.last_be)
+ ]
+ fsm.act("COPY",
+ Record.connect(self.sink, self.source, leave_out=set(["data", "last_be"])),
+ self.source.sop.eq(sop),
+ clr_sop.eq(self.source.stb & self.source.ack),
+
+ If(self.source.stb & self.source.eop & self.source.ack,
+ NextState("IDLE"),
+ )
+ )
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+from migen.bank.description import *
+from migen.bank.eventmanager import *
+
+
+class LiteEthMACSRAMWriter(Module, AutoCSR):
+ def __init__(self, dw, depth, nslots=2):
+ self.sink = sink = Sink(eth_phy_description(dw))
+ self.crc_error = Signal()
+
+ slotbits = max(log2_int(nslots), 1)
+ lengthbits = log2_int(depth*4) # length in bytes
+
+ self._slot = CSRStatus(slotbits)
+ self._length = CSRStatus(lengthbits)
+
+ self.submodules.ev = EventManager()
+ self.ev.available = EventSourceLevel()
+ self.ev.finalize()
+
+ # # #
+
+ # packet dropped if no slot available
+ sink.ack.reset = 1
+
+ # length computation
+ increment = Signal(3)
+ self.comb += \
+ If(sink.last_be[3],
+ increment.eq(1)
+ ).Elif(sink.last_be[2],
+ increment.eq(2)
+ ).Elif(sink.last_be[1],
+ increment.eq(3)
+ ).Else(
+ increment.eq(4)
+ )
+ counter = Counter(lengthbits, increment=increment)
+ self.submodules += counter
+
+ # slot computation
+ slot = Counter(slotbits)
+ self.submodules += slot
+
+ ongoing = Signal()
+
+ # status fifo
+ fifo = SyncFIFO([("slot", slotbits), ("length", lengthbits)], nslots)
+ self.submodules += fifo
+
+ # fsm
+ fsm = FSM(reset_state="IDLE")
+ self.submodules += fsm
+
+ fsm.act("IDLE",
+ If(sink.stb & sink.sop,
+ If(fifo.sink.ack,
+ ongoing.eq(1),
+ counter.ce.eq(1),
+ NextState("WRITE")
+ )
+ )
+ )
+ fsm.act("WRITE",
+ counter.ce.eq(sink.stb),
+ ongoing.eq(1),
+ If(sink.stb & sink.eop,
+ If((sink.error & sink.last_be) != 0,
+ NextState("DISCARD")
+ ).Else(
+ NextState("TERMINATE")
+ )
+ )
+ )
+ fsm.act("DISCARD",
+ counter.reset.eq(1),
+ NextState("IDLE")
+ )
+ self.comb += [
+ fifo.sink.slot.eq(slot.value),
+ fifo.sink.length.eq(counter.value)
+ ]
+ fsm.act("TERMINATE",
+ counter.reset.eq(1),
+ slot.ce.eq(1),
+ fifo.sink.stb.eq(1),
+ NextState("IDLE")
+ )
+ self.comb += [
+ fifo.source.ack.eq(self.ev.available.clear),
+ self.ev.available.trigger.eq(fifo.source.stb),
+ self._slot.status.eq(fifo.source.slot),
+ self._length.status.eq(fifo.source.length),
+ ]
+
+ # memory
+ mems = [None]*nslots
+ ports = [None]*nslots
+ for n in range(nslots):
+ mems[n] = Memory(dw, depth)
+ ports[n] = mems[n].get_port(write_capable=True)
+ self.specials += ports[n]
+ self.mems = mems
+
+ cases = {}
+ for n, port in enumerate(ports):
+ cases[n] = [
+ ports[n].adr.eq(counter.value[2:]),
+ ports[n].dat_w.eq(sink.data),
+ If(sink.stb & ongoing,
+ ports[n].we.eq(0xf)
+ )
+ ]
+ self.comb += Case(slot.value, cases)
+
+
+class LiteEthMACSRAMReader(Module, AutoCSR):
+ def __init__(self, dw, depth, nslots=2):
+ self.source = source = Source(eth_phy_description(dw))
+
+ slotbits = max(log2_int(nslots), 1)
+ lengthbits = log2_int(depth*4) # length in bytes
+ self.lengthbits = lengthbits
+
+ self._start = CSR()
+ self._ready = CSRStatus()
+ self._slot = CSRStorage(slotbits)
+ self._length = CSRStorage(lengthbits)
+
+ self.submodules.ev = EventManager()
+ self.ev.done = EventSourcePulse()
+ self.ev.finalize()
+
+ # # #
+
+ # command fifo
+ fifo = SyncFIFO([("slot", slotbits), ("length", lengthbits)], nslots)
+ self.submodules += fifo
+ self.comb += [
+ fifo.sink.stb.eq(self._start.re),
+ fifo.sink.slot.eq(self._slot.storage),
+ fifo.sink.length.eq(self._length.storage),
+ self._ready.status.eq(fifo.sink.ack)
+ ]
+
+ # length computation
+ self.submodules.counter = counter = Counter(lengthbits, increment=4)
+
+ # fsm
+ first = Signal()
+ last = Signal()
+ last_d = Signal()
+
+ fsm = FSM(reset_state="IDLE")
+ self.submodules += fsm
+
+ fsm.act("IDLE",
+ counter.reset.eq(1),
+ If(fifo.source.stb,
+ NextState("CHECK")
+ )
+ )
+ fsm.act("CHECK",
+ If(~last_d,
+ NextState("SEND"),
+ ).Else(
+ NextState("END"),
+ )
+ )
+ length_lsb = fifo.source.length[0:2]
+ self.comb += [
+ If(last,
+ If(length_lsb == 3,
+ source.last_be.eq(0b0010)
+ ).Elif(length_lsb == 2,
+ source.last_be.eq(0b0100)
+ ).Elif(length_lsb == 1,
+ source.last_be.eq(0b1000)
+ ).Else(
+ source.last_be.eq(0b0001)
+ )
+ )
+ ]
+ fsm.act("SEND",
+ source.stb.eq(1),
+ source.sop.eq(first),
+ source.eop.eq(last),
+ If(source.ack,
+ counter.ce.eq(~last),
+ NextState("CHECK")
+ )
+ )
+ fsm.act("END",
+ fifo.source.ack.eq(1),
+ self.ev.done.trigger.eq(1),
+ NextState("IDLE")
+ )
+
+ # first/last computation
+ self.sync += [
+ If(fsm.ongoing("IDLE"),
+ first.eq(1)
+ ).Elif(source.stb & source.ack,
+ first.eq(0)
+ )
+ ]
+ self.comb += last.eq((counter.value + 4) >= fifo.source.length)
+ self.sync += last_d.eq(last)
+
+ # memory
+ rd_slot = fifo.source.slot
+
+ mems = [None]*nslots
+ ports = [None]*nslots
+ for n in range(nslots):
+ mems[n] = Memory(dw, depth)
+ ports[n] = mems[n].get_port()
+ self.specials += ports[n]
+ self.mems = mems
+
+ cases = {}
+ for n, port in enumerate(ports):
+ self.comb += ports[n].adr.eq(counter.value[2:])
+ cases[n] = [source.data.eq(port.dat_r)]
+ self.comb += Case(rd_slot, cases)
+
+
+class LiteEthMACSRAM(Module, AutoCSR):
+ def __init__(self, dw, depth, nrxslots, ntxslots):
+ self.submodules.writer = LiteEthMACSRAMWriter(dw, depth, nrxslots)
+ self.submodules.reader = LiteEthMACSRAMReader(dw, depth, ntxslots)
+ self.submodules.ev = SharedIRQ(self.writer.ev, self.reader.ev)
+ self.sink, self.source = self.writer.sink, self.reader.source
--- /dev/null
+from misoc.com.liteethmini.common import *
+from misoc.com.liteethmini.mac.frontend import sram
+
+from migen.bus import wishbone
+from migen.fhdl.simplify import FullMemoryWE
+
+
+class LiteEthMACWishboneInterface(Module, AutoCSR):
+ def __init__(self, dw, nrxslots=2, ntxslots=2):
+ self.sink = Sink(eth_phy_description(dw))
+ self.source = Source(eth_phy_description(dw))
+ self.bus = wishbone.Interface()
+
+ # # #
+
+ # storage in SRAM
+ sram_depth = buffer_depth//(dw//8)
+ self.submodules.sram = sram.LiteEthMACSRAM(dw, sram_depth, nrxslots, ntxslots)
+ self.comb += [
+ Record.connect(self.sink, self.sram.sink),
+ Record.connect(self.sram.source, self.source)
+ ]
+
+ # Wishbone interface
+ wb_rx_sram_ifs = [wishbone.SRAM(self.sram.writer.mems[n], read_only=True)
+ for n in range(nrxslots)]
+ # TODO: FullMemoryWE should move to Mibuild
+ wb_tx_sram_ifs = [FullMemoryWE()(wishbone.SRAM(self.sram.reader.mems[n], read_only=False))
+ for n in range(ntxslots)]
+ wb_sram_ifs = wb_rx_sram_ifs + wb_tx_sram_ifs
+
+ wb_slaves = []
+ decoderoffset = log2_int(sram_depth)
+ decoderbits = log2_int(len(wb_sram_ifs))
+ for n, wb_sram_if in enumerate(wb_sram_ifs):
+ def slave_filter(a, v=n):
+ return a[decoderoffset:decoderoffset+decoderbits] == v
+ wb_slaves.append((slave_filter, wb_sram_if.bus))
+ self.submodules += wb_sram_if
+ wb_con = wishbone.Decoder(self.bus, wb_slaves, register=True)
+ self.submodules += wb_con
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+
+def LiteEthPHY(clock_pads, pads, clk_freq=None, **kwargs):
+ # Autodetect PHY
+ if hasattr(pads, "source_stb"):
+ # This is a simulation PHY
+ from misoc.com.liteethmini.phy.sim import LiteEthPHYSim
+ return LiteEthPHYSim(pads)
+ elif hasattr(clock_pads, "gtx") and flen(pads.tx_data) == 8:
+ if hasattr(clock_pads, "tx"):
+ # This is a 10/100/1G PHY
+ from misoc.com.liteethmini.phy.gmii_mii import LiteEthPHYGMIIMII
+ return LiteEthPHYGMIIMII(clock_pads, pads, clk_freq=clk_freq, **kwargs)
+ else:
+ # This is a pure 1G PHY
+ from misoc.com.liteethmini.phy.gmii import LiteEthPHYGMII
+ return LiteEthPHYGMII(clock_pads, pads, **kwargs)
+ elif hasattr(pads, "rx_ctl"):
+ # This is a 10/100/1G RGMII PHY
+ raise ValueError("RGMII PHYs are specific to vendors (for now), use direct instantiation")
+ elif flen(pads.tx_data) == 4:
+ # This is a MII PHY
+ from misoc.com.liteethmini.phy.mii import LiteEthPHYMII
+ return LiteEthPHYMII(clock_pads, pads, **kwargs)
+ else:
+ raise ValueError("Unable to autodetect PHY from platform file, use direct instantiation")
--- /dev/null
+from migen.genlib.io import DDROutput
+
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthPHYGMIITX(Module):
+ def __init__(self, pads, pads_register=True):
+ self.sink = sink = Sink(eth_phy_description(8))
+
+ # # #
+
+ if hasattr(pads, "tx_er"):
+ self.sync += pads.tx_er.eq(0)
+ pads_eq = [
+ pads.tx_en.eq(sink.stb),
+ pads.tx_data.eq(sink.data)
+ ]
+ if pads_register:
+ self.sync += pads_eq
+ else:
+ self.comb += pads_eq
+ self.comb += sink.ack.eq(1)
+
+
+class LiteEthPHYGMIIRX(Module):
+ def __init__(self, pads):
+ self.source = source = Source(eth_phy_description(8))
+
+ # # #
+
+ dv_d = Signal()
+ self.sync += dv_d.eq(pads.dv)
+
+ sop = Signal()
+ eop = Signal()
+ self.comb += [
+ sop.eq(pads.dv & ~dv_d),
+ eop.eq(~pads.dv & dv_d)
+ ]
+ self.sync += [
+ source.stb.eq(pads.dv),
+ source.sop.eq(sop),
+ source.data.eq(pads.rx_data)
+ ]
+ self.comb += source.eop.eq(eop)
+
+
+class LiteEthPHYGMIICRG(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, with_hw_init_reset, mii_mode=0):
+ self._reset = CSRStorage()
+
+ # # #
+
+ self.clock_domains.cd_eth_rx = ClockDomain()
+ self.clock_domains.cd_eth_tx = ClockDomain()
+
+ # RX : Let the synthesis tool insert the appropriate clock buffer
+ self.comb += self.cd_eth_rx.clk.eq(clock_pads.rx)
+
+ # TX : GMII: Drive clock_pads.gtx, clock_pads.tx unused
+ # MII: Use PHY clock_pads.tx as eth_tx_clk, do not drive clock_pads.gtx
+ self.specials += DDROutput(1, mii_mode, clock_pads.gtx, ClockSignal("eth_tx"))
+ # XXX Xilinx specific, replace BUFGMUX with a generic clock buffer?
+ self.specials += Instance("BUFGMUX",
+ i_I0=self.cd_eth_rx.clk,
+ i_I1=clock_pads.tx,
+ i_S=mii_mode,
+ o_O=self.cd_eth_tx.clk)
+
+ if with_hw_init_reset:
+ reset = Signal()
+ counter_done = Signal()
+ self.submodules.counter = counter = Counter(max=512)
+ self.comb += [
+ counter_done.eq(counter.value == 256),
+ counter.ce.eq(~counter_done),
+ reset.eq(~counter_done | self._reset.storage)
+ ]
+ else:
+ reset = self._reset.storage
+ self.comb += pads.rst_n.eq(~reset)
+ self.specials += [
+ AsyncResetSynchronizer(self.cd_eth_tx, reset),
+ AsyncResetSynchronizer(self.cd_eth_rx, reset),
+ ]
+
+
+class LiteEthPHYGMII(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, with_hw_init_reset=True):
+ self.dw = 8
+ self.submodules.crg = LiteEthPHYGMIICRG(clock_pads,
+ pads,
+ with_hw_init_reset)
+ self.submodules.tx = RenameClockDomains(LiteEthPHYGMIITX(pads),
+ "eth_tx")
+ self.submodules.rx = RenameClockDomains(LiteEthPHYGMIIRX(pads),
+ "eth_rx")
+ self.sink, self.source = self.tx.sink, self.rx.source
--- /dev/null
+from migen.genlib.io import DDROutput
+from migen.flow.plumbing import Multiplexer, Demultiplexer
+from migen.genlib.cdc import PulseSynchronizer
+
+from misoc.com.liteethmini.common import *
+
+from misoc.com.liteethmini.phy.gmii import LiteEthPHYGMIICRG
+from misoc.com.liteethmini.phy.mii import LiteEthPHYMIITX, LiteEthPHYMIIRX
+from misoc.com.liteethmini.phy.gmii import LiteEthPHYGMIITX, LiteEthPHYGMIIRX
+
+modes = {
+ "GMII": 0,
+ "MII": 1
+}
+
+tx_pads_layout = [("tx_er", 1), ("tx_en", 1), ("tx_data", 8)]
+rx_pads_layout = [("rx_er", 1), ("dv", 1), ("rx_data", 8)]
+
+
+class LiteEthPHYGMIIMIITX(Module):
+ def __init__(self, pads, mode):
+ self.sink = sink = Sink(eth_phy_description(8))
+
+ # # #
+
+ gmii_tx_pads = Record(tx_pads_layout)
+ gmii_tx = LiteEthPHYGMIITX(gmii_tx_pads, pads_register=False)
+ self.submodules += gmii_tx
+
+ mii_tx_pads = Record(tx_pads_layout)
+ mii_tx = LiteEthPHYMIITX(mii_tx_pads, pads_register=False)
+ self.submodules += mii_tx
+
+ demux = Demultiplexer(eth_phy_description(8), 2)
+ self.submodules += demux
+ self.comb += [
+ demux.sel.eq(mode == modes["MII"]),
+ Record.connect(sink, demux.sink),
+ Record.connect(demux.source0, gmii_tx.sink),
+ Record.connect(demux.source1, mii_tx.sink),
+ ]
+
+ if hasattr(pads, "tx_er"):
+ self.comb += pads.tx_er.eq(0)
+ self.sync += [
+ If(mode == modes["MII"],
+ pads.tx_en.eq(mii_tx_pads.tx_en),
+ pads.tx_data.eq(mii_tx_pads.tx_data),
+ ).Else(
+ pads.tx_en.eq(gmii_tx_pads.tx_en),
+ pads.tx_data.eq(gmii_tx_pads.tx_data),
+ )
+ ]
+
+
+class LiteEthPHYGMIIMIIRX(Module):
+ def __init__(self, pads, mode):
+ self.source = source = Source(eth_phy_description(8))
+
+ # # #
+
+ pads_d = Record(rx_pads_layout)
+ self.sync += [
+ pads_d.dv.eq(pads.dv),
+ pads_d.rx_data.eq(pads.rx_data)
+ ]
+
+ gmii_rx = LiteEthPHYGMIIRX(pads_d)
+ self.submodules += gmii_rx
+
+ mii_rx = LiteEthPHYMIIRX(pads_d)
+ self.submodules += mii_rx
+
+ mux = Multiplexer(eth_phy_description(8), 2)
+ self.submodules += mux
+ self.comb += [
+ mux.sel.eq(mode == modes["MII"]),
+ Record.connect(gmii_rx.source, mux.sink0),
+ Record.connect(mii_rx.source, mux.sink1),
+ Record.connect(mux.source, source)
+ ]
+
+
+class LiteEthGMIIMIIModeDetection(Module, AutoCSR):
+ def __init__(self, clk_freq):
+ self.mode = Signal()
+ self._mode = CSRStatus()
+
+ # # #
+
+ mode = Signal()
+ update_mode = Signal()
+ self.sync += \
+ If(update_mode,
+ self.mode.eq(mode)
+ )
+ self.comb += self._mode.status.eq(self.mode)
+
+ # Principle:
+ # sys_clk >= 125MHz
+ # eth_rx <= 125Mhz
+ # We generate ticks every 1024 clock cycles in eth_rx domain
+ # and measure ticks period in sys_clk domain.
+
+ # Generate a tick every 1024 clock cycles (eth_rx clock domain)
+ eth_tick = Signal()
+ eth_counter = Signal(10)
+ self.sync.eth_rx += eth_counter.eq(eth_counter + 1)
+ self.comb += eth_tick.eq(eth_counter == 0)
+
+ # Synchronize tick (sys clock domain)
+ sys_tick = Signal()
+ eth_ps = PulseSynchronizer("eth_rx", "sys")
+ self.comb += [
+ eth_ps.i.eq(eth_tick),
+ sys_tick.eq(eth_ps.o)
+ ]
+ self.submodules += eth_ps
+
+ # sys_clk domain counter
+ sys_counter = Counter(24)
+ self.submodules += sys_counter
+
+ fsm = FSM(reset_state="IDLE")
+ self.submodules += fsm
+
+ fsm.act("IDLE",
+ sys_counter.reset.eq(1),
+ If(sys_tick,
+ NextState("COUNT")
+ )
+ )
+ fsm.act("COUNT",
+ sys_counter.ce.eq(1),
+ If(sys_tick,
+ NextState("DETECTION")
+ )
+ )
+ fsm.act("DETECTION",
+ update_mode.eq(1),
+ # if freq < 125MHz-5% use MII mode
+ If(sys_counter.value > int((clk_freq/125000000)*1024*1.05),
+ mode.eq(1)
+ # if freq >= 125MHz-5% use GMII mode
+ ).Else(
+ mode.eq(0)
+ ),
+ NextState("IDLE")
+ )
+
+
+class LiteEthPHYGMIIMII(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, clk_freq, with_hw_init_reset=True):
+ self.dw = 8
+ # Note: we can use GMII CRG since it also handles tx clock pad used for MII
+ self.submodules.mode_detection = LiteEthGMIIMIIModeDetection(clk_freq)
+ mode = self.mode_detection.mode
+ self.submodules.crg = LiteEthPHYGMIICRG(clock_pads, pads, with_hw_init_reset, mode == modes["MII"])
+ self.submodules.tx = RenameClockDomains(LiteEthPHYGMIIMIITX(pads, mode), "eth_tx")
+ self.submodules.rx = RenameClockDomains(LiteEthPHYGMIIMIIRX(pads, mode), "eth_rx")
+ self.sink, self.source = self.tx.sink, self.rx.source
--- /dev/null
+from misoc.com.liteethmini.common import *
+from misoc.com.liteethmini.generic import *
+
+
+class LiteEthPHYLoopbackCRG(Module, AutoCSR):
+ def __init__(self):
+ self._reset = CSRStorage()
+
+ # # #
+
+ self.clock_domains.cd_eth_rx = ClockDomain()
+ self.clock_domains.cd_eth_tx = ClockDomain()
+ self.comb += [
+ self.cd_eth_rx.clk.eq(ClockSignal()),
+ self.cd_eth_tx.clk.eq(ClockSignal())
+ ]
+
+ reset = self._reset.storage
+ self.comb += [
+ self.cd_eth_rx.rst.eq(reset),
+ self.cd_eth_tx.rst.eq(reset)
+ ]
+
+
+class LiteEthPHYLoopback(Module, AutoCSR):
+ def __init__(self):
+ self.dw = 8
+ self.submodules.crg = LiteEthLoopbackPHYCRG()
+ self.sink = sink = Sink(eth_phy_description(8))
+ self.source = source = Source(eth_phy_description(8))
+ self.comb += Record.connect(self.sink, self.source)
--- /dev/null
+from misoc.com.liteethmini.common import *
+
+
+def converter_description(dw):
+ payload_layout = [("data", dw)]
+ return EndpointDescription(payload_layout, packetized=True)
+
+
+class LiteEthPHYMIITX(Module):
+ def __init__(self, pads, pads_register=True):
+ self.sink = sink = Sink(eth_phy_description(8))
+
+ # # #
+
+ if hasattr(pads, "tx_er"):
+ self.sync += pads.tx_er.eq(0)
+ converter = Converter(converter_description(8),
+ converter_description(4))
+ self.submodules += converter
+ self.comb += [
+ converter.sink.stb.eq(sink.stb),
+ converter.sink.data.eq(sink.data),
+ sink.ack.eq(converter.sink.ack),
+ converter.source.ack.eq(1)
+ ]
+ pads_eq = [
+ pads.tx_en.eq(converter.source.stb),
+ pads.tx_data.eq(converter.source.data)
+ ]
+ if pads_register:
+ self.sync += pads_eq
+ else:
+ self.comb += pads_eq
+
+
+class LiteEthPHYMIIRX(Module):
+ def __init__(self, pads):
+ self.source = source = Source(eth_phy_description(8))
+
+ # # #
+
+ sop = FlipFlop(reset=1)
+ self.submodules += sop
+
+ converter = Converter(converter_description(4),
+ converter_description(8))
+ converter = InsertReset(converter)
+ self.submodules += converter
+
+ self.sync += [
+ converter.reset.eq(~pads.dv),
+ converter.sink.stb.eq(1),
+ converter.sink.data.eq(pads.rx_data)
+ ]
+ self.comb += [
+ sop.reset.eq(~pads.dv),
+ sop.ce.eq(pads.dv),
+ converter.sink.sop.eq(sop.q),
+ converter.sink.eop.eq(~pads.dv)
+ ]
+ self.comb += Record.connect(converter.source, source)
+
+
+class LiteEthPHYMIICRG(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, with_hw_init_reset):
+ self._reset = CSRStorage()
+
+ # # #
+
+ if hasattr(clock_pads, "phy"):
+ self.sync.base50 += clock_pads.phy.eq(~clock_pads.phy)
+
+ self.clock_domains.cd_eth_rx = ClockDomain()
+ self.clock_domains.cd_eth_tx = ClockDomain()
+ self.comb += self.cd_eth_rx.clk.eq(clock_pads.rx)
+ self.comb += self.cd_eth_tx.clk.eq(clock_pads.tx)
+
+ if with_hw_init_reset:
+ reset = Signal()
+ counter_done = Signal()
+ self.submodules.counter = counter = Counter(max=512)
+ self.comb += [
+ counter_done.eq(counter.value == 256),
+ counter.ce.eq(~counter_done),
+ reset.eq(~counter_done | self._reset.storage)
+ ]
+ else:
+ reset = self._reset.storage
+ self.comb += pads.rst_n.eq(~reset)
+ self.specials += [
+ AsyncResetSynchronizer(self.cd_eth_tx, reset),
+ AsyncResetSynchronizer(self.cd_eth_rx, reset),
+ ]
+
+
+class LiteEthPHYMII(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, with_hw_init_reset=True):
+ self.dw = 8
+ self.submodules.crg = LiteEthPHYMIICRG(clock_pads, pads, with_hw_init_reset)
+ self.submodules.tx = RenameClockDomains(LiteEthPHYMIITX(pads), "eth_tx")
+ self.submodules.rx = RenameClockDomains(LiteEthPHYMIIRX(pads), "eth_rx")
+ self.sink, self.source = self.tx.sink, self.rx.source
--- /dev/null
+# RGMII PHY for Spartan-6
+
+from migen.genlib.io import DDROutput
+from migen.genlib.misc import WaitTimer
+from migen.genlib.fsm import FSM, NextState
+
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthPHYRGMIITX(Module):
+ def __init__(self, pads, pads_register=True):
+ self.sink = sink = Sink(eth_phy_description(8))
+
+ # # #
+
+ self.specials += Instance("ODDR2",
+ p_DDR_ALIGNMENT="C0", p_INIT=0, p_SRTYPE="ASYNC",
+ i_C0=ClockSignal("eth_tx"), i_C1=~ClockSignal("eth_tx"),
+ i_CE=1, i_S=0, i_R=0,
+ i_D0=sink.stb, i_D1=sink.stb, o_Q=pads.tx_ctl,
+ )
+ for i in range(4):
+ self.specials += Instance("ODDR2",
+ p_DDR_ALIGNMENT="C0", p_INIT=0, p_SRTYPE="ASYNC",
+ i_C0=ClockSignal("eth_tx"), i_C1=~ClockSignal("eth_tx"),
+ i_CE=1, i_S=0, i_R=0,
+ i_D0=sink.data[i], i_D1=sink.data[4+i], o_Q=pads.tx_data[i],
+ )
+ self.comb += sink.ack.eq(1)
+
+
+class LiteEthPHYRGMIIRX(Module):
+ def __init__(self, pads):
+ self.source = source = Source(eth_phy_description(8))
+
+ # # #
+
+ rx_ctl = Signal()
+ rx_data = Signal(8)
+
+ self.specials += Instance("IDDR2",
+ p_DDR_ALIGNMENT="C0", p_INIT_Q0=0, p_INIT_Q1=0, p_SRTYPE="ASYNC",
+ i_C0=ClockSignal("eth_rx"), i_C1=~ClockSignal("eth_rx"),
+ i_CE=1, i_S=0, i_R=0,
+ i_D=pads.rx_ctl, o_Q1=rx_ctl,
+ )
+ for i in range(4):
+ self.specials += Instance("IDDR2",
+ p_DDR_ALIGNMENT="C0", p_INIT_Q0=0, p_INIT_Q1=0, p_SRTYPE="ASYNC",
+ i_C0=ClockSignal("eth_rx"), i_C1=~ClockSignal("eth_rx"),
+ i_CE=1, i_S=0, i_R=0,
+ i_D=pads.rx_data[i], o_Q0=rx_data[4+i], o_Q1=rx_data[i],
+ )
+
+
+ rx_ctl_d = Signal()
+ self.sync += rx_ctl_d.eq(rx_ctl)
+
+ sop = Signal()
+ eop = Signal()
+ self.comb += [
+ sop.eq(rx_ctl & ~rx_ctl_d),
+ eop.eq(~rx_ctl & rx_ctl_d)
+ ]
+ self.sync += [
+ source.stb.eq(rx_ctl),
+ source.sop.eq(sop),
+ source.data.eq(rx_data)
+ ]
+ self.comb += source.eop.eq(eop)
+
+
+class LiteEthPHYRGMIICRG(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, with_hw_init_reset):
+ self._reset = CSRStorage()
+
+ # # #
+
+ self.clock_domains.cd_eth_rx = ClockDomain()
+ self.clock_domains.cd_eth_tx = ClockDomain()
+
+
+ # RX
+ dcm_reset = Signal()
+ dcm_locked = Signal()
+
+ timer = WaitTimer(1024)
+ fsm = FSM(reset_state="DCM_RESET")
+ self.submodules += timer, fsm
+
+ fsm.act("DCM_RESET",
+ dcm_reset.eq(1),
+ timer.wait.eq(1),
+ If(timer.done,
+ timer.wait.eq(0),
+ NextState("DCM_WAIT")
+ )
+ )
+ fsm.act("DCM_WAIT",
+ timer.wait.eq(1),
+ If(timer.done,
+ NextState("DCM_CHECK_LOCK")
+ )
+ )
+ fsm.act("DCM_CHECK_LOCK",
+ If(~dcm_locked,
+ NextState("DCM_RESET")
+ )
+ )
+
+ clk90_rx = Signal()
+ clk0_rx = Signal()
+ clk0_rx_bufg = Signal()
+ self.specials += Instance("DCM",
+ i_CLKIN=clock_pads.rx,
+ i_CLKFB=clk0_rx_bufg,
+ o_CLK0=clk0_rx,
+ o_CLK90=clk90_rx,
+ o_LOCKED=dcm_locked,
+ i_PSEN=0,
+ i_PSCLK=0,
+ i_PSINCDEC=0,
+ i_RST=dcm_reset
+ )
+
+ self.specials += Instance("BUFG", i_I=clk0_rx, o_O=clk0_rx_bufg)
+ self.specials += Instance("BUFG", i_I=clk90_rx, o_O=self.cd_eth_rx.clk)
+
+ # TX
+ self.specials += DDROutput(1, 0, clock_pads.tx, ClockSignal("eth_tx"))
+ self.specials += Instance("BUFG", i_I=self.cd_eth_rx.clk, o_O=self.cd_eth_tx.clk)
+
+ # Reset
+ if with_hw_init_reset:
+ reset = Signal()
+ counter_done = Signal()
+ self.submodules.counter = counter = Counter(max=512)
+ self.comb += [
+ counter_done.eq(counter.value == 256),
+ counter.ce.eq(~counter_done),
+ reset.eq(~counter_done | self._reset.storage)
+ ]
+ else:
+ reset = self._reset.storage
+ self.comb += pads.rst_n.eq(~reset)
+ self.specials += [
+ AsyncResetSynchronizer(self.cd_eth_tx, reset),
+ AsyncResetSynchronizer(self.cd_eth_rx, reset),
+ ]
+
+
+class LiteEthPHYRGMII(Module, AutoCSR):
+ def __init__(self, clock_pads, pads, with_hw_init_reset=True):
+ self.dw = 8
+ self.submodules.crg = LiteEthPHYRGMIICRG(clock_pads,
+ pads,
+ with_hw_init_reset)
+ self.submodules.tx = RenameClockDomains(LiteEthPHYRGMIITX(pads),
+ "eth_tx")
+ self.submodules.rx = RenameClockDomains(LiteEthPHYRGMIIRX(pads),
+ "eth_rx")
+ self.sink, self.source = self.tx.sink, self.rx.source
--- /dev/null
+import os
+
+from misoc.com.liteethmini.common import *
+
+
+class LiteEthPHYSimCRG(Module, AutoCSR):
+ def __init__(self):
+ self._reset = CSRStorage()
+
+ # # #
+
+ self.clock_domains.cd_eth_rx = ClockDomain()
+ self.clock_domains.cd_eth_tx = ClockDomain()
+ self.comb += [
+ self.cd_eth_rx.clk.eq(ClockSignal()),
+ self.cd_eth_tx.clk.eq(ClockSignal())
+ ]
+
+ reset = self._reset.storage
+ self.comb += [
+ self.cd_eth_rx.rst.eq(reset),
+ self.cd_eth_tx.rst.eq(reset)
+ ]
+
+
+class LiteEthPHYSim(Module, AutoCSR):
+ def __init__(self, pads, tap="tap0", ip_address="192.168.0.14"):
+ self.dw = 8
+ self.submodules.crg = LiteEthPHYSimCRG()
+ self.sink = sink = Sink(eth_phy_description(8))
+ self.source = source = Source(eth_phy_description(8))
+ self.tap = tap
+ self.ip_address = ip_address
+
+ self.comb += [
+ pads.source_stb.eq(self.sink.stb),
+ pads.source_data.eq(self.sink.data),
+ self.sink.ack.eq(1)
+ ]
+
+ self.sync += [
+ self.source.stb.eq(pads.sink_stb),
+ self.source.sop.eq(pads.sink_stb & ~self.source.stb),
+ self.source.data.eq(pads.sink_data),
+ ]
+ self.comb += [
+ self.source.eop.eq(~pads.sink_stb & self.source.stb),
+ ]
+
+ # XXX avoid use of os.system
+ os.system("openvpn --mktun --dev {}".format(self.tap))
+ os.system("ifconfig {} {} up".format(self.tap, self.ip_address))
+ os.system("mknod /dev/net/{} c 10 200".format(self.tap))
+
+ def do_exit(self, *args, **kwargs):
+ # XXX avoid use of os.system
+ os.system("rm -f /dev/net/{}".format(self.tap))
+ os.system("openvpn --rmtun --dev {}".format(self.tap))
+++ /dev/null
-Unless otherwise noted, LiteEth is copyright (C) 2015 Florent Kermarrec.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-Other authors retain ownership of their contributions. If a submission can
-reasonably be considered independently copyrightable, it's yours and we
-encourage you to claim it with appropriate copyright notices. This submission
-then falls under the "otherwise noted" category. All submissions are strongly
-encouraged to use the two-clause BSD license reproduced above.
+++ /dev/null
- __ _ __ ______ __ __ ____ _
- / / (_) /____ / __/ /_/ / / |/ (_)__ (_)
- / /__/ / __/ -_) _// __/ _ \/ /|_/ / / _ \/ /
- /____/_/\__/\__/___/\__/_//_/_/ /_/_/_//_/_/
-
- Copyright 2012-2015 / EnjoyDigital / M-Labs Ltd
-
- A small footprint and configurable minimal Ethernet core
- powered by Migen
-
-[> Intro
----------
-LiteEthMini is a subset of LiteEth (https://github.com/enjoy-digital/liteeth)
-intended to be used with a CPU and a software stack.
-
-[> Features
------------
-- Ethernet MAC with various various PHYs (GMII, MII, RGMII, Loopback)
-- SRAM storage and wishbone interface
-
-[> Possible improvements
--------------------------
-- add DMA interface to MAC
-- add SGMII PHY
-- ... See below Support and consulting :)
-
-If you want to support these features, please contact us at florent [AT]
-enjoy-digital.fr. You can also contact our partner on the public mailing list
-devel [AT] lists.m-labs.hk.
-
-[> License
------------
-LiteEthMini is released under the very permissive two-clause BSD license. Under
-the terms of this license, you are authorized to use LiteEthMini for closed-source
-proprietary designs.
-Even though we do not require you to do so, those things are awesome, so please
-do them if possible:
- - tell us that you are using LiteEthMini
- - cite LiteEthMini in publications related to research it has helped
- - send us feedback and suggestions for improvements
- - send us bug reports when something goes wrong
- - send us the modifications and improvements you have done to LiteEthMini.
-
-[> Support and consulting
---------------------------
-We love open-source hardware and like sharing our designs with others.
-
-LiteEthMini is mainly developed and maintained by EnjoyDigital.
-
-If you would like to know more about LiteEthMini or if you are already a happy
-user and would like to extend it for your needs, EnjoyDigital can provide standard
-commercial support as well as consulting services.
-
-So feel free to contact us, we'd love to work with you! (and eventually shorten
-the list of the possible improvements :)
-
-[> Contact
-E-mail: florent [AT] enjoy-digital.fr
\ No newline at end of file
+++ /dev/null
-import math
-from collections import OrderedDict
-
-from migen import *
-from migen.genlib.resetsync import AsyncResetSynchronizer
-from migen.genlib.record import *
-from migen.genlib.fsm import FSM, NextState
-from migen.genlib.misc import chooser, reverse_bytes, FlipFlop, Counter, WaitTimer
-from migen.flow.actor import *
-from migen.actorlib.structuring import Converter, Pipeline
-from migen.actorlib.fifo import SyncFIFO, AsyncFIFO
-from migen.actorlib.packet import *
-from migen.bank.description import *
-
-class Port:
- def connect(self, port):
- r = [
- Record.connect(self.source, port.sink),
- Record.connect(port.source, self.sink)
- ]
- return r
-
-eth_mtu = 1532
-eth_min_len = 46
-eth_interpacket_gap = 12
-eth_preamble = 0xD555555555555555
-buffer_depth = 2**log2_int(eth_mtu, need_pow2=False)
-
-def eth_phy_description(dw):
- payload_layout = [
- ("data", dw),
- ("last_be", dw//8),
- ("error", dw//8)
- ]
- return EndpointDescription(payload_layout, packetized=True)
-
-
-def eth_mac_description(dw):
- payload_layout = mac_header.get_layout() + [
- ("data", dw),
- ("last_be", dw//8),
- ("error", dw//8)
- ]
- return EndpointDescription(payload_layout, packetized=True)
+++ /dev/null
-from misoc.com.liteethmini.common import *
-from misoc.com.liteethmini.mac.core import LiteEthMACCore
-from misoc.com.liteethmini.mac.frontend.wishbone import LiteEthMACWishboneInterface
-
-
-class LiteEthMAC(Module, AutoCSR):
- def __init__(self, phy, dw,
- interface="wishbone",
- endianness="big",
- with_preamble_crc=True):
- self.submodules.core = LiteEthMACCore(phy, dw, endianness, with_preamble_crc)
- self.csrs = []
- if interface == "wishbone":
- self.submodules.interface = LiteEthMACWishboneInterface(dw, 2, 2)
- self.comb += Port.connect(self.interface, self.core)
- self.ev, self.bus = self.interface.sram.ev, self.interface.bus
- self.csrs = self.interface.get_csrs() + self.core.get_csrs()
- else:
- raise NotImplementedError
-
- def get_csrs(self):
- return self.csrs
+++ /dev/null
-from misoc.com.liteethmini.common import *
-from misoc.com.liteethmini.mac.core import gap, preamble, crc, padding, last_be
-from misoc.com.liteethmini.phy.sim import LiteEthPHYSim
-from misoc.com.liteethmini.phy.mii import LiteEthPHYMII
-
-
-class LiteEthMACCore(Module, AutoCSR):
- def __init__(self, phy, dw, endianness="big",
- with_preamble_crc=True,
- with_padding=True):
- if dw < phy.dw:
- raise ValueError("Core data width({}) must be larger than PHY data width({})".format(dw, phy.dw))
-
- rx_pipeline = [phy]
- tx_pipeline = [phy]
-
- # Interpacket gap
- tx_gap_inserter = gap.LiteEthMACGap(phy.dw)
- rx_gap_checker = gap.LiteEthMACGap(phy.dw, ack_on_gap=True)
- self.submodules += RenameClockDomains(tx_gap_inserter, "eth_tx")
- self.submodules += RenameClockDomains(rx_gap_checker, "eth_rx")
-
- tx_pipeline += [tx_gap_inserter]
- rx_pipeline += [rx_gap_checker]
-
- # Preamble / CRC
- if isinstance(phy, LiteEthPHYSim):
- # In simulation, avoid CRC/Preamble to enable direct connection
- # to the Ethernet tap.
- self._preamble_crc = CSRStatus(reset=1)
- elif with_preamble_crc:
- self._preamble_crc = CSRStatus(reset=1)
- # Preamble insert/check
- preamble_inserter = preamble.LiteEthMACPreambleInserter(phy.dw)
- preamble_checker = preamble.LiteEthMACPreambleChecker(phy.dw)
- self.submodules += RenameClockDomains(preamble_inserter, "eth_tx")
- self.submodules += RenameClockDomains(preamble_checker, "eth_rx")
-
- # CRC insert/check
- crc32_inserter = crc.LiteEthMACCRC32Inserter(eth_phy_description(phy.dw))
- crc32_checker = crc.LiteEthMACCRC32Checker(eth_phy_description(phy.dw))
- self.submodules += RenameClockDomains(crc32_inserter, "eth_tx")
- self.submodules += RenameClockDomains(crc32_checker, "eth_rx")
-
- tx_pipeline += [preamble_inserter, crc32_inserter]
- rx_pipeline += [preamble_checker, crc32_checker]
-
- # Padding
- if with_padding:
- padding_inserter = padding.LiteEthMACPaddingInserter(phy.dw, 60)
- padding_checker = padding.LiteEthMACPaddingChecker(phy.dw, 60)
- self.submodules += RenameClockDomains(padding_inserter, "eth_tx")
- self.submodules += RenameClockDomains(padding_checker, "eth_rx")
-
- tx_pipeline += [padding_inserter]
- rx_pipeline += [padding_checker]
-
- # Delimiters
- if dw != 8:
- tx_last_be = last_be.LiteEthMACTXLastBE(phy.dw)
- rx_last_be = last_be.LiteEthMACRXLastBE(phy.dw)
- self.submodules += RenameClockDomains(tx_last_be, "eth_tx")
- self.submodules += RenameClockDomains(rx_last_be, "eth_rx")
-
- tx_pipeline += [tx_last_be]
- rx_pipeline += [rx_last_be]
-
- # Converters
- if dw != phy.dw:
- reverse = endianness == "big"
- tx_converter = Converter(eth_phy_description(dw),
- eth_phy_description(phy.dw),
- reverse=reverse)
- rx_converter = Converter(eth_phy_description(phy.dw),
- eth_phy_description(dw),
- reverse=reverse)
- self.submodules += RenameClockDomains(tx_converter, "eth_tx")
- self.submodules += RenameClockDomains(rx_converter, "eth_rx")
-
- tx_pipeline += [tx_converter]
- rx_pipeline += [rx_converter]
-
- # Cross Domain Crossing
- if isinstance(phy, LiteEthPHYMII):
- fifo_depth = 8
- else:
- fifo_depth = 64
- tx_cdc = AsyncFIFO(eth_phy_description(dw), fifo_depth)
- rx_cdc = AsyncFIFO(eth_phy_description(dw), fifo_depth)
- self.submodules += RenameClockDomains(tx_cdc, {"write": "sys", "read": "eth_tx"})
- self.submodules += RenameClockDomains(rx_cdc, {"write": "eth_rx", "read": "sys"})
-
- tx_pipeline += [tx_cdc]
- rx_pipeline += [rx_cdc]
-
- # Graph
- self.submodules.tx_pipeline = Pipeline(*reversed(tx_pipeline))
- self.submodules.rx_pipeline = Pipeline(*rx_pipeline)
-
- self.sink, self.source = self.tx_pipeline.sink, self.rx_pipeline.source
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthMACCRCEngine(Module):
- """Cyclic Redundancy Check Engine
-
- Compute next CRC value from last CRC value and data input using
- an optimized asynchronous LFSR.
-
- Parameters
- ----------
- data_width : int
- Width of the data bus.
- width : int
- Width of the CRC.
- polynom : int
- Polynom of the CRC (ex: 0x04C11DB7 for IEEE 802.3 CRC)
-
- Attributes
- ----------
- data : in
- Data input.
- last : in
- last CRC value.
- next :
- next CRC value.
- """
- def __init__(self, data_width, width, polynom):
- self.data = Signal(data_width)
- self.last = Signal(width)
- self.next = Signal(width)
-
- # # #
-
- def _optimize_eq(l):
- """
- Replace even numbers of XORs in the equation
- with an equivalent XOR
- """
- d = OrderedDict()
- for e in l:
- if e in d:
- d[e] += 1
- else:
- d[e] = 1
- r = []
- for key, value in d.items():
- if value%2 != 0:
- r.append(key)
- return r
-
- # compute and optimize CRC's LFSR
- curval = [[("state", i)] for i in range(width)]
- for i in range(data_width):
- feedback = curval.pop() + [("din", i)]
- for j in range(width-1):
- if (polynom & (1<<(j+1))):
- curval[j] += feedback
- curval[j] = _optimize_eq(curval[j])
- curval.insert(0, feedback)
-
- # implement logic
- for i in range(width):
- xors = []
- for t, n in curval[i]:
- if t == "state":
- xors += [self.last[n]]
- elif t == "din":
- xors += [self.data[n]]
- self.comb += self.next[i].eq(optree("^", xors))
-
-
-@DecorateModule(InsertReset)
-@DecorateModule(InsertCE)
-class LiteEthMACCRC32(Module):
- """IEEE 802.3 CRC
-
- Implement an IEEE 802.3 CRC generator/checker.
-
- Parameters
- ----------
- data_width : int
- Width of the data bus.
-
- Attributes
- ----------
- d : in
- Data input.
- value : out
- CRC value (used for generator).
- error : out
- CRC error (used for checker).
- """
- width = 32
- polynom = 0x04C11DB7
- init = 2**width-1
- check = 0xC704DD7B
- def __init__(self, data_width):
- self.data = Signal(data_width)
- self.value = Signal(self.width)
- self.error = Signal()
-
- # # #
-
- self.submodules.engine = LiteEthMACCRCEngine(data_width, self.width, self.polynom)
- reg = Signal(self.width, reset=self.init)
- self.sync += reg.eq(self.engine.next)
- self.comb += [
- self.engine.data.eq(self.data),
- self.engine.last.eq(reg),
-
- self.value.eq(~reg[::-1]),
- self.error.eq(self.engine.next != self.check)
- ]
-
-
-class LiteEthMACCRCInserter(Module):
- """CRC Inserter
-
- Append a CRC at the end of each packet.
-
- Parameters
- ----------
- description : description
- description of the dataflow.
-
- Attributes
- ----------
- sink : in
- Packets input without CRC.
- source : out
- Packets output with CRC.
- """
- def __init__(self, crc_class, description):
- self.sink = sink = Sink(description)
- self.source = source = Source(description)
- self.busy = Signal()
-
- # # #
-
- dw = flen(sink.data)
- crc = crc_class(dw)
- fsm = FSM(reset_state="IDLE")
- self.submodules += crc, fsm
-
- fsm.act("IDLE",
- crc.reset.eq(1),
- sink.ack.eq(1),
- If(sink.stb & sink.sop,
- sink.ack.eq(0),
- NextState("COPY"),
- )
- )
- fsm.act("COPY",
- crc.ce.eq(sink.stb & source.ack),
- crc.data.eq(sink.data),
- Record.connect(sink, source),
- source.eop.eq(0),
- If(sink.stb & sink.eop & source.ack,
- NextState("INSERT"),
- )
- )
- ratio = crc.width//dw
- if ratio > 1:
- cnt = Signal(max=ratio, reset=ratio-1)
- cnt_done = Signal()
- fsm.act("INSERT",
- source.stb.eq(1),
- chooser(crc.value, cnt, source.data, reverse=True),
- If(cnt_done,
- source.eop.eq(1),
- If(source.ack, NextState("IDLE"))
- )
- )
- self.comb += cnt_done.eq(cnt == 0)
- self.sync += \
- If(fsm.ongoing("IDLE"),
- cnt.eq(cnt.reset)
- ).Elif(fsm.ongoing("INSERT") & ~cnt_done,
- cnt.eq(cnt - source.ack)
- )
- else:
- fsm.act("INSERT",
- source.stb.eq(1),
- source.eop.eq(1),
- source.data.eq(crc.value),
- If(source.ack, NextState("IDLE"))
- )
- self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
-
-
-class LiteEthMACCRC32Inserter(LiteEthMACCRCInserter):
- def __init__(self, description):
- LiteEthMACCRCInserter.__init__(self, LiteEthMACCRC32, description)
-
-
-class LiteEthMACCRCChecker(Module):
- """CRC Checker
-
- Check CRC at the end of each packet.
-
- Parameters
- ----------
- description : description
- description of the dataflow.
-
- Attributes
- ----------
- sink : in
- Packets input with CRC.
- source : out
- Packets output without CRC and "error" set to 0
- on eop when CRC OK / set to 1 when CRC KO.
- """
- def __init__(self, crc_class, description):
- self.sink = sink = Sink(description)
- self.source = source = Source(description)
- self.busy = Signal()
-
- # # #
-
- dw = flen(sink.data)
- crc = crc_class(dw)
- self.submodules += crc
- ratio = crc.width//dw
-
- error = Signal()
- fifo = InsertReset(SyncFIFO(description, ratio + 1))
- self.submodules += fifo
-
- fsm = FSM(reset_state="RESET")
- self.submodules += fsm
-
- fifo_in = Signal()
- fifo_out = Signal()
- fifo_full = Signal()
-
- self.comb += [
- fifo_full.eq(fifo.fifo.level == ratio),
- fifo_in.eq(sink.stb & (~fifo_full | fifo_out)),
- fifo_out.eq(source.stb & source.ack),
-
- Record.connect(sink, fifo.sink),
- fifo.sink.stb.eq(fifo_in),
- self.sink.ack.eq(fifo_in),
-
- source.stb.eq(sink.stb & fifo_full),
- source.sop.eq(fifo.source.sop),
- source.eop.eq(sink.eop),
- fifo.source.ack.eq(fifo_out),
- source.payload.eq(fifo.source.payload),
-
- source.error.eq(sink.error | crc.error),
- ]
-
- fsm.act("RESET",
- crc.reset.eq(1),
- fifo.reset.eq(1),
- NextState("IDLE"),
- )
- self.comb += crc.data.eq(sink.data)
- fsm.act("IDLE",
- If(sink.stb & sink.sop & sink.ack,
- crc.ce.eq(1),
- NextState("COPY")
- )
- )
- fsm.act("COPY",
- If(sink.stb & sink.ack,
- crc.ce.eq(1),
- If(sink.eop,
- NextState("RESET")
- )
- )
- )
- self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
-
-
-class LiteEthMACCRC32Checker(LiteEthMACCRCChecker):
- def __init__(self, description):
- LiteEthMACCRCChecker.__init__(self, LiteEthMACCRC32, description)
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-class LiteEthMACGap(Module):
- def __init__(self, dw, ack_on_gap=False):
- self.sink = sink = Sink(eth_phy_description(dw))
- self.source = source = Source(eth_phy_description(dw))
-
- # # #
-
- gap = math.ceil(eth_interpacket_gap/(dw//8))
- self.submodules.counter = counter = Counter(max=gap)
-
- self.submodules.fsm = fsm = FSM(reset_state="COPY")
- fsm.act("COPY",
- counter.reset.eq(1),
- Record.connect(sink, source),
- If(sink.stb & sink.eop & sink.ack,
- NextState("GAP")
- )
- )
- fsm.act("GAP",
- counter.ce.eq(1),
- sink.ack.eq(int(ack_on_gap)),
- If(counter.value == (gap-1),
- NextState("COPY")
- )
- )
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthMACTXLastBE(Module):
- def __init__(self, dw):
- self.sink = sink = Sink(eth_phy_description(dw))
- self.source = source = Source(eth_phy_description(dw))
-
- # # #
-
- ongoing = Signal()
- self.sync += \
- If(sink.stb & sink.ack,
- If(sink.sop,
- ongoing.eq(1)
- ).Elif(sink.last_be,
- ongoing.eq(0)
- )
- )
- self.comb += [
- source.stb.eq(sink.stb & (sink.sop | ongoing)),
- source.sop.eq(sink.sop),
- source.eop.eq(sink.last_be),
- source.data.eq(sink.data),
- sink.ack.eq(source.ack)
- ]
-
-
-class LiteEthMACRXLastBE(Module):
- def __init__(self, dw):
- self.sink = sink = Sink(eth_phy_description(dw))
- self.source = source = Source(eth_phy_description(dw))
-
- # # #
-
- self.comb += [
- source.stb.eq(sink.stb),
- source.sop.eq(sink.sop),
- source.eop.eq(sink.eop),
- source.data.eq(sink.data),
- source.last_be.eq(sink.eop),
- sink.ack.eq(source.ack)
- ]
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthMACPaddingInserter(Module):
- def __init__(self, dw, padding):
- self.sink = sink = Sink(eth_phy_description(dw))
- self.source = source = Source(eth_phy_description(dw))
-
- # # #
-
- padding_limit = math.ceil(padding/(dw/8))-1
-
- self.submodules.counter = counter = Counter(16, reset=1)
- counter_done = Signal()
- self.comb += [
- counter.reset.eq(sink.stb & sink.sop & sink.ack),
- counter.ce.eq(source.stb & source.ack),
- counter_done.eq(counter.value >= padding_limit),
- ]
-
- self.submodules.fsm = fsm = FSM(reset_state="IDLE")
- fsm.act("IDLE",
- Record.connect(sink, source),
- If(source.stb & source.ack,
- counter.ce.eq(1),
- If(sink.eop,
- If(~counter_done,
- source.eop.eq(0),
- NextState("PADDING")
- )
- )
- )
- )
- fsm.act("PADDING",
- source.stb.eq(1),
- source.eop.eq(counter_done),
- source.data.eq(0),
- If(source.ack,
- If(counter_done,
- NextState("IDLE")
- )
- )
- )
-
-
-class LiteEthMACPaddingChecker(Module):
- def __init__(self, dw, packet_min_length):
- self.sink = sink = Sink(eth_phy_description(dw))
- self.source = source = Source(eth_phy_description(dw))
-
- # # #
-
- # XXX see if we should drop the packet when
- # payload size < minimum ethernet payload size
- self.comb += Record.connect(sink, source)
-
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthMACPreambleInserter(Module):
- def __init__(self, dw):
- self.sink = Sink(eth_phy_description(dw))
- self.source = Source(eth_phy_description(dw))
-
- # # #
-
- preamble = Signal(64, reset=eth_preamble)
- cnt_max = (64//dw)-1
- cnt = Signal(max=cnt_max+1)
- clr_cnt = Signal()
- inc_cnt = Signal()
-
- self.sync += \
- If(clr_cnt,
- cnt.eq(0)
- ).Elif(inc_cnt,
- cnt.eq(cnt+1)
- )
-
- fsm = FSM(reset_state="IDLE")
- self.submodules += fsm
- fsm.act("IDLE",
- self.sink.ack.eq(1),
- clr_cnt.eq(1),
- If(self.sink.stb & self.sink.sop,
- self.sink.ack.eq(0),
- NextState("INSERT"),
- )
- )
- fsm.act("INSERT",
- self.source.stb.eq(1),
- self.source.sop.eq(cnt == 0),
- chooser(preamble, cnt, self.source.data),
- If(cnt == cnt_max,
- If(self.source.ack, NextState("COPY"))
- ).Else(
- inc_cnt.eq(self.source.ack)
- )
- )
-
- self.comb += [
- self.source.data.eq(self.sink.data),
- self.source.last_be.eq(self.sink.last_be)
- ]
- fsm.act("COPY",
- Record.connect(self.sink, self.source, leave_out=set(["data", "last_be"])),
- self.source.sop.eq(0),
-
- If(self.sink.stb & self.sink.eop & self.source.ack,
- NextState("IDLE"),
- )
- )
-
-
-class LiteEthMACPreambleChecker(Module):
- def __init__(self, dw):
- self.sink = Sink(eth_phy_description(dw))
- self.source = Source(eth_phy_description(dw))
-
- # # #
-
- preamble = Signal(64, reset=eth_preamble)
- cnt_max = (64//dw) - 1
- cnt = Signal(max=cnt_max+1)
- clr_cnt = Signal()
- inc_cnt = Signal()
-
- self.sync += \
- If(clr_cnt,
- cnt.eq(0)
- ).Elif(inc_cnt,
- cnt.eq(cnt+1)
- )
-
- discard = Signal()
- clr_discard = Signal()
- set_discard = Signal()
-
- self.sync += \
- If(clr_discard,
- discard.eq(0)
- ).Elif(set_discard,
- discard.eq(1)
- )
-
- sop = Signal()
- clr_sop = Signal()
- set_sop = Signal()
- self.sync += \
- If(clr_sop,
- sop.eq(0)
- ).Elif(set_sop,
- sop.eq(1)
- )
-
- ref = Signal(dw)
- match = Signal()
- self.comb += [
- chooser(preamble, cnt, ref),
- match.eq(self.sink.data == ref)
- ]
-
- fsm = FSM(reset_state="IDLE")
- self.submodules += fsm
-
- fsm.act("IDLE",
- self.sink.ack.eq(1),
- clr_cnt.eq(1),
- clr_discard.eq(1),
- If(self.sink.stb & self.sink.sop,
- clr_cnt.eq(0),
- inc_cnt.eq(1),
- clr_discard.eq(0),
- set_discard.eq(~match),
- NextState("CHECK"),
- )
- )
- fsm.act("CHECK",
- self.sink.ack.eq(1),
- If(self.sink.stb,
- set_discard.eq(~match),
- If(cnt == cnt_max,
- If(discard | (~match),
- NextState("IDLE")
- ).Else(
- set_sop.eq(1),
- NextState("COPY")
- )
- ).Else(
- inc_cnt.eq(1)
- )
- )
- )
- self.comb += [
- self.source.data.eq(self.sink.data),
- self.source.last_be.eq(self.sink.last_be)
- ]
- fsm.act("COPY",
- Record.connect(self.sink, self.source, leave_out=set(["data", "last_be"])),
- self.source.sop.eq(sop),
- clr_sop.eq(self.source.stb & self.source.ack),
-
- If(self.source.stb & self.source.eop & self.source.ack,
- NextState("IDLE"),
- )
- )
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-from migen.bank.description import *
-from migen.bank.eventmanager import *
-
-
-class LiteEthMACSRAMWriter(Module, AutoCSR):
- def __init__(self, dw, depth, nslots=2):
- self.sink = sink = Sink(eth_phy_description(dw))
- self.crc_error = Signal()
-
- slotbits = max(log2_int(nslots), 1)
- lengthbits = log2_int(depth*4) # length in bytes
-
- self._slot = CSRStatus(slotbits)
- self._length = CSRStatus(lengthbits)
-
- self.submodules.ev = EventManager()
- self.ev.available = EventSourceLevel()
- self.ev.finalize()
-
- # # #
-
- # packet dropped if no slot available
- sink.ack.reset = 1
-
- # length computation
- increment = Signal(3)
- self.comb += \
- If(sink.last_be[3],
- increment.eq(1)
- ).Elif(sink.last_be[2],
- increment.eq(2)
- ).Elif(sink.last_be[1],
- increment.eq(3)
- ).Else(
- increment.eq(4)
- )
- counter = Counter(lengthbits, increment=increment)
- self.submodules += counter
-
- # slot computation
- slot = Counter(slotbits)
- self.submodules += slot
-
- ongoing = Signal()
-
- # status fifo
- fifo = SyncFIFO([("slot", slotbits), ("length", lengthbits)], nslots)
- self.submodules += fifo
-
- # fsm
- fsm = FSM(reset_state="IDLE")
- self.submodules += fsm
-
- fsm.act("IDLE",
- If(sink.stb & sink.sop,
- If(fifo.sink.ack,
- ongoing.eq(1),
- counter.ce.eq(1),
- NextState("WRITE")
- )
- )
- )
- fsm.act("WRITE",
- counter.ce.eq(sink.stb),
- ongoing.eq(1),
- If(sink.stb & sink.eop,
- If((sink.error & sink.last_be) != 0,
- NextState("DISCARD")
- ).Else(
- NextState("TERMINATE")
- )
- )
- )
- fsm.act("DISCARD",
- counter.reset.eq(1),
- NextState("IDLE")
- )
- self.comb += [
- fifo.sink.slot.eq(slot.value),
- fifo.sink.length.eq(counter.value)
- ]
- fsm.act("TERMINATE",
- counter.reset.eq(1),
- slot.ce.eq(1),
- fifo.sink.stb.eq(1),
- NextState("IDLE")
- )
- self.comb += [
- fifo.source.ack.eq(self.ev.available.clear),
- self.ev.available.trigger.eq(fifo.source.stb),
- self._slot.status.eq(fifo.source.slot),
- self._length.status.eq(fifo.source.length),
- ]
-
- # memory
- mems = [None]*nslots
- ports = [None]*nslots
- for n in range(nslots):
- mems[n] = Memory(dw, depth)
- ports[n] = mems[n].get_port(write_capable=True)
- self.specials += ports[n]
- self.mems = mems
-
- cases = {}
- for n, port in enumerate(ports):
- cases[n] = [
- ports[n].adr.eq(counter.value[2:]),
- ports[n].dat_w.eq(sink.data),
- If(sink.stb & ongoing,
- ports[n].we.eq(0xf)
- )
- ]
- self.comb += Case(slot.value, cases)
-
-
-class LiteEthMACSRAMReader(Module, AutoCSR):
- def __init__(self, dw, depth, nslots=2):
- self.source = source = Source(eth_phy_description(dw))
-
- slotbits = max(log2_int(nslots), 1)
- lengthbits = log2_int(depth*4) # length in bytes
- self.lengthbits = lengthbits
-
- self._start = CSR()
- self._ready = CSRStatus()
- self._slot = CSRStorage(slotbits)
- self._length = CSRStorage(lengthbits)
-
- self.submodules.ev = EventManager()
- self.ev.done = EventSourcePulse()
- self.ev.finalize()
-
- # # #
-
- # command fifo
- fifo = SyncFIFO([("slot", slotbits), ("length", lengthbits)], nslots)
- self.submodules += fifo
- self.comb += [
- fifo.sink.stb.eq(self._start.re),
- fifo.sink.slot.eq(self._slot.storage),
- fifo.sink.length.eq(self._length.storage),
- self._ready.status.eq(fifo.sink.ack)
- ]
-
- # length computation
- self.submodules.counter = counter = Counter(lengthbits, increment=4)
-
- # fsm
- first = Signal()
- last = Signal()
- last_d = Signal()
-
- fsm = FSM(reset_state="IDLE")
- self.submodules += fsm
-
- fsm.act("IDLE",
- counter.reset.eq(1),
- If(fifo.source.stb,
- NextState("CHECK")
- )
- )
- fsm.act("CHECK",
- If(~last_d,
- NextState("SEND"),
- ).Else(
- NextState("END"),
- )
- )
- length_lsb = fifo.source.length[0:2]
- self.comb += [
- If(last,
- If(length_lsb == 3,
- source.last_be.eq(0b0010)
- ).Elif(length_lsb == 2,
- source.last_be.eq(0b0100)
- ).Elif(length_lsb == 1,
- source.last_be.eq(0b1000)
- ).Else(
- source.last_be.eq(0b0001)
- )
- )
- ]
- fsm.act("SEND",
- source.stb.eq(1),
- source.sop.eq(first),
- source.eop.eq(last),
- If(source.ack,
- counter.ce.eq(~last),
- NextState("CHECK")
- )
- )
- fsm.act("END",
- fifo.source.ack.eq(1),
- self.ev.done.trigger.eq(1),
- NextState("IDLE")
- )
-
- # first/last computation
- self.sync += [
- If(fsm.ongoing("IDLE"),
- first.eq(1)
- ).Elif(source.stb & source.ack,
- first.eq(0)
- )
- ]
- self.comb += last.eq((counter.value + 4) >= fifo.source.length)
- self.sync += last_d.eq(last)
-
- # memory
- rd_slot = fifo.source.slot
-
- mems = [None]*nslots
- ports = [None]*nslots
- for n in range(nslots):
- mems[n] = Memory(dw, depth)
- ports[n] = mems[n].get_port()
- self.specials += ports[n]
- self.mems = mems
-
- cases = {}
- for n, port in enumerate(ports):
- self.comb += ports[n].adr.eq(counter.value[2:])
- cases[n] = [source.data.eq(port.dat_r)]
- self.comb += Case(rd_slot, cases)
-
-
-class LiteEthMACSRAM(Module, AutoCSR):
- def __init__(self, dw, depth, nrxslots, ntxslots):
- self.submodules.writer = LiteEthMACSRAMWriter(dw, depth, nrxslots)
- self.submodules.reader = LiteEthMACSRAMReader(dw, depth, ntxslots)
- self.submodules.ev = SharedIRQ(self.writer.ev, self.reader.ev)
- self.sink, self.source = self.writer.sink, self.reader.source
+++ /dev/null
-from misoc.com.liteethmini.common import *
-from misoc.com.liteethmini.mac.frontend import sram
-
-from migen.bus import wishbone
-from migen.fhdl.simplify import FullMemoryWE
-
-
-class LiteEthMACWishboneInterface(Module, AutoCSR):
- def __init__(self, dw, nrxslots=2, ntxslots=2):
- self.sink = Sink(eth_phy_description(dw))
- self.source = Source(eth_phy_description(dw))
- self.bus = wishbone.Interface()
-
- # # #
-
- # storage in SRAM
- sram_depth = buffer_depth//(dw//8)
- self.submodules.sram = sram.LiteEthMACSRAM(dw, sram_depth, nrxslots, ntxslots)
- self.comb += [
- Record.connect(self.sink, self.sram.sink),
- Record.connect(self.sram.source, self.source)
- ]
-
- # Wishbone interface
- wb_rx_sram_ifs = [wishbone.SRAM(self.sram.writer.mems[n], read_only=True)
- for n in range(nrxslots)]
- # TODO: FullMemoryWE should move to Mibuild
- wb_tx_sram_ifs = [FullMemoryWE()(wishbone.SRAM(self.sram.reader.mems[n], read_only=False))
- for n in range(ntxslots)]
- wb_sram_ifs = wb_rx_sram_ifs + wb_tx_sram_ifs
-
- wb_slaves = []
- decoderoffset = log2_int(sram_depth)
- decoderbits = log2_int(len(wb_sram_ifs))
- for n, wb_sram_if in enumerate(wb_sram_ifs):
- def slave_filter(a, v=n):
- return a[decoderoffset:decoderoffset+decoderbits] == v
- wb_slaves.append((slave_filter, wb_sram_if.bus))
- self.submodules += wb_sram_if
- wb_con = wishbone.Decoder(self.bus, wb_slaves, register=True)
- self.submodules += wb_con
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-
-def LiteEthPHY(clock_pads, pads, clk_freq=None, **kwargs):
- # Autodetect PHY
- if hasattr(pads, "source_stb"):
- # This is a simulation PHY
- from misoc.com.liteethmini.phy.sim import LiteEthPHYSim
- return LiteEthPHYSim(pads)
- elif hasattr(clock_pads, "gtx") and flen(pads.tx_data) == 8:
- if hasattr(clock_pads, "tx"):
- # This is a 10/100/1G PHY
- from misoc.com.liteethmini.phy.gmii_mii import LiteEthPHYGMIIMII
- return LiteEthPHYGMIIMII(clock_pads, pads, clk_freq=clk_freq, **kwargs)
- else:
- # This is a pure 1G PHY
- from misoc.com.liteethmini.phy.gmii import LiteEthPHYGMII
- return LiteEthPHYGMII(clock_pads, pads, **kwargs)
- elif hasattr(pads, "rx_ctl"):
- # This is a 10/100/1G RGMII PHY
- raise ValueError("RGMII PHYs are specific to vendors (for now), use direct instantiation")
- elif flen(pads.tx_data) == 4:
- # This is a MII PHY
- from misoc.com.liteethmini.phy.mii import LiteEthPHYMII
- return LiteEthPHYMII(clock_pads, pads, **kwargs)
- else:
- raise ValueError("Unable to autodetect PHY from platform file, use direct instantiation")
+++ /dev/null
-from migen.genlib.io import DDROutput
-
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthPHYGMIITX(Module):
- def __init__(self, pads, pads_register=True):
- self.sink = sink = Sink(eth_phy_description(8))
-
- # # #
-
- if hasattr(pads, "tx_er"):
- self.sync += pads.tx_er.eq(0)
- pads_eq = [
- pads.tx_en.eq(sink.stb),
- pads.tx_data.eq(sink.data)
- ]
- if pads_register:
- self.sync += pads_eq
- else:
- self.comb += pads_eq
- self.comb += sink.ack.eq(1)
-
-
-class LiteEthPHYGMIIRX(Module):
- def __init__(self, pads):
- self.source = source = Source(eth_phy_description(8))
-
- # # #
-
- dv_d = Signal()
- self.sync += dv_d.eq(pads.dv)
-
- sop = Signal()
- eop = Signal()
- self.comb += [
- sop.eq(pads.dv & ~dv_d),
- eop.eq(~pads.dv & dv_d)
- ]
- self.sync += [
- source.stb.eq(pads.dv),
- source.sop.eq(sop),
- source.data.eq(pads.rx_data)
- ]
- self.comb += source.eop.eq(eop)
-
-
-class LiteEthPHYGMIICRG(Module, AutoCSR):
- def __init__(self, clock_pads, pads, with_hw_init_reset, mii_mode=0):
- self._reset = CSRStorage()
-
- # # #
-
- self.clock_domains.cd_eth_rx = ClockDomain()
- self.clock_domains.cd_eth_tx = ClockDomain()
-
- # RX : Let the synthesis tool insert the appropriate clock buffer
- self.comb += self.cd_eth_rx.clk.eq(clock_pads.rx)
-
- # TX : GMII: Drive clock_pads.gtx, clock_pads.tx unused
- # MII: Use PHY clock_pads.tx as eth_tx_clk, do not drive clock_pads.gtx
- self.specials += DDROutput(1, mii_mode, clock_pads.gtx, ClockSignal("eth_tx"))
- # XXX Xilinx specific, replace BUFGMUX with a generic clock buffer?
- self.specials += Instance("BUFGMUX",
- i_I0=self.cd_eth_rx.clk,
- i_I1=clock_pads.tx,
- i_S=mii_mode,
- o_O=self.cd_eth_tx.clk)
-
- if with_hw_init_reset:
- reset = Signal()
- counter_done = Signal()
- self.submodules.counter = counter = Counter(max=512)
- self.comb += [
- counter_done.eq(counter.value == 256),
- counter.ce.eq(~counter_done),
- reset.eq(~counter_done | self._reset.storage)
- ]
- else:
- reset = self._reset.storage
- self.comb += pads.rst_n.eq(~reset)
- self.specials += [
- AsyncResetSynchronizer(self.cd_eth_tx, reset),
- AsyncResetSynchronizer(self.cd_eth_rx, reset),
- ]
-
-
-class LiteEthPHYGMII(Module, AutoCSR):
- def __init__(self, clock_pads, pads, with_hw_init_reset=True):
- self.dw = 8
- self.submodules.crg = LiteEthPHYGMIICRG(clock_pads,
- pads,
- with_hw_init_reset)
- self.submodules.tx = RenameClockDomains(LiteEthPHYGMIITX(pads),
- "eth_tx")
- self.submodules.rx = RenameClockDomains(LiteEthPHYGMIIRX(pads),
- "eth_rx")
- self.sink, self.source = self.tx.sink, self.rx.source
+++ /dev/null
-from migen.genlib.io import DDROutput
-from migen.flow.plumbing import Multiplexer, Demultiplexer
-from migen.genlib.cdc import PulseSynchronizer
-
-from misoc.com.liteethmini.common import *
-
-from misoc.com.liteethmini.phy.gmii import LiteEthPHYGMIICRG
-from misoc.com.liteethmini.phy.mii import LiteEthPHYMIITX, LiteEthPHYMIIRX
-from misoc.com.liteethmini.phy.gmii import LiteEthPHYGMIITX, LiteEthPHYGMIIRX
-
-modes = {
- "GMII": 0,
- "MII": 1
-}
-
-tx_pads_layout = [("tx_er", 1), ("tx_en", 1), ("tx_data", 8)]
-rx_pads_layout = [("rx_er", 1), ("dv", 1), ("rx_data", 8)]
-
-
-class LiteEthPHYGMIIMIITX(Module):
- def __init__(self, pads, mode):
- self.sink = sink = Sink(eth_phy_description(8))
-
- # # #
-
- gmii_tx_pads = Record(tx_pads_layout)
- gmii_tx = LiteEthPHYGMIITX(gmii_tx_pads, pads_register=False)
- self.submodules += gmii_tx
-
- mii_tx_pads = Record(tx_pads_layout)
- mii_tx = LiteEthPHYMIITX(mii_tx_pads, pads_register=False)
- self.submodules += mii_tx
-
- demux = Demultiplexer(eth_phy_description(8), 2)
- self.submodules += demux
- self.comb += [
- demux.sel.eq(mode == modes["MII"]),
- Record.connect(sink, demux.sink),
- Record.connect(demux.source0, gmii_tx.sink),
- Record.connect(demux.source1, mii_tx.sink),
- ]
-
- if hasattr(pads, "tx_er"):
- self.comb += pads.tx_er.eq(0)
- self.sync += [
- If(mode == modes["MII"],
- pads.tx_en.eq(mii_tx_pads.tx_en),
- pads.tx_data.eq(mii_tx_pads.tx_data),
- ).Else(
- pads.tx_en.eq(gmii_tx_pads.tx_en),
- pads.tx_data.eq(gmii_tx_pads.tx_data),
- )
- ]
-
-
-class LiteEthPHYGMIIMIIRX(Module):
- def __init__(self, pads, mode):
- self.source = source = Source(eth_phy_description(8))
-
- # # #
-
- pads_d = Record(rx_pads_layout)
- self.sync += [
- pads_d.dv.eq(pads.dv),
- pads_d.rx_data.eq(pads.rx_data)
- ]
-
- gmii_rx = LiteEthPHYGMIIRX(pads_d)
- self.submodules += gmii_rx
-
- mii_rx = LiteEthPHYMIIRX(pads_d)
- self.submodules += mii_rx
-
- mux = Multiplexer(eth_phy_description(8), 2)
- self.submodules += mux
- self.comb += [
- mux.sel.eq(mode == modes["MII"]),
- Record.connect(gmii_rx.source, mux.sink0),
- Record.connect(mii_rx.source, mux.sink1),
- Record.connect(mux.source, source)
- ]
-
-
-class LiteEthGMIIMIIModeDetection(Module, AutoCSR):
- def __init__(self, clk_freq):
- self.mode = Signal()
- self._mode = CSRStatus()
-
- # # #
-
- mode = Signal()
- update_mode = Signal()
- self.sync += \
- If(update_mode,
- self.mode.eq(mode)
- )
- self.comb += self._mode.status.eq(self.mode)
-
- # Principle:
- # sys_clk >= 125MHz
- # eth_rx <= 125Mhz
- # We generate ticks every 1024 clock cycles in eth_rx domain
- # and measure ticks period in sys_clk domain.
-
- # Generate a tick every 1024 clock cycles (eth_rx clock domain)
- eth_tick = Signal()
- eth_counter = Signal(10)
- self.sync.eth_rx += eth_counter.eq(eth_counter + 1)
- self.comb += eth_tick.eq(eth_counter == 0)
-
- # Synchronize tick (sys clock domain)
- sys_tick = Signal()
- eth_ps = PulseSynchronizer("eth_rx", "sys")
- self.comb += [
- eth_ps.i.eq(eth_tick),
- sys_tick.eq(eth_ps.o)
- ]
- self.submodules += eth_ps
-
- # sys_clk domain counter
- sys_counter = Counter(24)
- self.submodules += sys_counter
-
- fsm = FSM(reset_state="IDLE")
- self.submodules += fsm
-
- fsm.act("IDLE",
- sys_counter.reset.eq(1),
- If(sys_tick,
- NextState("COUNT")
- )
- )
- fsm.act("COUNT",
- sys_counter.ce.eq(1),
- If(sys_tick,
- NextState("DETECTION")
- )
- )
- fsm.act("DETECTION",
- update_mode.eq(1),
- # if freq < 125MHz-5% use MII mode
- If(sys_counter.value > int((clk_freq/125000000)*1024*1.05),
- mode.eq(1)
- # if freq >= 125MHz-5% use GMII mode
- ).Else(
- mode.eq(0)
- ),
- NextState("IDLE")
- )
-
-
-class LiteEthPHYGMIIMII(Module, AutoCSR):
- def __init__(self, clock_pads, pads, clk_freq, with_hw_init_reset=True):
- self.dw = 8
- # Note: we can use GMII CRG since it also handles tx clock pad used for MII
- self.submodules.mode_detection = LiteEthGMIIMIIModeDetection(clk_freq)
- mode = self.mode_detection.mode
- self.submodules.crg = LiteEthPHYGMIICRG(clock_pads, pads, with_hw_init_reset, mode == modes["MII"])
- self.submodules.tx = RenameClockDomains(LiteEthPHYGMIIMIITX(pads, mode), "eth_tx")
- self.submodules.rx = RenameClockDomains(LiteEthPHYGMIIMIIRX(pads, mode), "eth_rx")
- self.sink, self.source = self.tx.sink, self.rx.source
+++ /dev/null
-from misoc.com.liteethmini.common import *
-from misoc.com.liteethmini.generic import *
-
-
-class LiteEthPHYLoopbackCRG(Module, AutoCSR):
- def __init__(self):
- self._reset = CSRStorage()
-
- # # #
-
- self.clock_domains.cd_eth_rx = ClockDomain()
- self.clock_domains.cd_eth_tx = ClockDomain()
- self.comb += [
- self.cd_eth_rx.clk.eq(ClockSignal()),
- self.cd_eth_tx.clk.eq(ClockSignal())
- ]
-
- reset = self._reset.storage
- self.comb += [
- self.cd_eth_rx.rst.eq(reset),
- self.cd_eth_tx.rst.eq(reset)
- ]
-
-
-class LiteEthPHYLoopback(Module, AutoCSR):
- def __init__(self):
- self.dw = 8
- self.submodules.crg = LiteEthLoopbackPHYCRG()
- self.sink = sink = Sink(eth_phy_description(8))
- self.source = source = Source(eth_phy_description(8))
- self.comb += Record.connect(self.sink, self.source)
+++ /dev/null
-from misoc.com.liteethmini.common import *
-
-
-def converter_description(dw):
- payload_layout = [("data", dw)]
- return EndpointDescription(payload_layout, packetized=True)
-
-
-class LiteEthPHYMIITX(Module):
- def __init__(self, pads, pads_register=True):
- self.sink = sink = Sink(eth_phy_description(8))
-
- # # #
-
- if hasattr(pads, "tx_er"):
- self.sync += pads.tx_er.eq(0)
- converter = Converter(converter_description(8),
- converter_description(4))
- self.submodules += converter
- self.comb += [
- converter.sink.stb.eq(sink.stb),
- converter.sink.data.eq(sink.data),
- sink.ack.eq(converter.sink.ack),
- converter.source.ack.eq(1)
- ]
- pads_eq = [
- pads.tx_en.eq(converter.source.stb),
- pads.tx_data.eq(converter.source.data)
- ]
- if pads_register:
- self.sync += pads_eq
- else:
- self.comb += pads_eq
-
-
-class LiteEthPHYMIIRX(Module):
- def __init__(self, pads):
- self.source = source = Source(eth_phy_description(8))
-
- # # #
-
- sop = FlipFlop(reset=1)
- self.submodules += sop
-
- converter = Converter(converter_description(4),
- converter_description(8))
- converter = InsertReset(converter)
- self.submodules += converter
-
- self.sync += [
- converter.reset.eq(~pads.dv),
- converter.sink.stb.eq(1),
- converter.sink.data.eq(pads.rx_data)
- ]
- self.comb += [
- sop.reset.eq(~pads.dv),
- sop.ce.eq(pads.dv),
- converter.sink.sop.eq(sop.q),
- converter.sink.eop.eq(~pads.dv)
- ]
- self.comb += Record.connect(converter.source, source)
-
-
-class LiteEthPHYMIICRG(Module, AutoCSR):
- def __init__(self, clock_pads, pads, with_hw_init_reset):
- self._reset = CSRStorage()
-
- # # #
-
- if hasattr(clock_pads, "phy"):
- self.sync.base50 += clock_pads.phy.eq(~clock_pads.phy)
-
- self.clock_domains.cd_eth_rx = ClockDomain()
- self.clock_domains.cd_eth_tx = ClockDomain()
- self.comb += self.cd_eth_rx.clk.eq(clock_pads.rx)
- self.comb += self.cd_eth_tx.clk.eq(clock_pads.tx)
-
- if with_hw_init_reset:
- reset = Signal()
- counter_done = Signal()
- self.submodules.counter = counter = Counter(max=512)
- self.comb += [
- counter_done.eq(counter.value == 256),
- counter.ce.eq(~counter_done),
- reset.eq(~counter_done | self._reset.storage)
- ]
- else:
- reset = self._reset.storage
- self.comb += pads.rst_n.eq(~reset)
- self.specials += [
- AsyncResetSynchronizer(self.cd_eth_tx, reset),
- AsyncResetSynchronizer(self.cd_eth_rx, reset),
- ]
-
-
-class LiteEthPHYMII(Module, AutoCSR):
- def __init__(self, clock_pads, pads, with_hw_init_reset=True):
- self.dw = 8
- self.submodules.crg = LiteEthPHYMIICRG(clock_pads, pads, with_hw_init_reset)
- self.submodules.tx = RenameClockDomains(LiteEthPHYMIITX(pads), "eth_tx")
- self.submodules.rx = RenameClockDomains(LiteEthPHYMIIRX(pads), "eth_rx")
- self.sink, self.source = self.tx.sink, self.rx.source
+++ /dev/null
-# RGMII PHY for Spartan-6
-
-from migen.genlib.io import DDROutput
-from migen.genlib.misc import WaitTimer
-from migen.genlib.fsm import FSM, NextState
-
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthPHYRGMIITX(Module):
- def __init__(self, pads, pads_register=True):
- self.sink = sink = Sink(eth_phy_description(8))
-
- # # #
-
- self.specials += Instance("ODDR2",
- p_DDR_ALIGNMENT="C0", p_INIT=0, p_SRTYPE="ASYNC",
- i_C0=ClockSignal("eth_tx"), i_C1=~ClockSignal("eth_tx"),
- i_CE=1, i_S=0, i_R=0,
- i_D0=sink.stb, i_D1=sink.stb, o_Q=pads.tx_ctl,
- )
- for i in range(4):
- self.specials += Instance("ODDR2",
- p_DDR_ALIGNMENT="C0", p_INIT=0, p_SRTYPE="ASYNC",
- i_C0=ClockSignal("eth_tx"), i_C1=~ClockSignal("eth_tx"),
- i_CE=1, i_S=0, i_R=0,
- i_D0=sink.data[i], i_D1=sink.data[4+i], o_Q=pads.tx_data[i],
- )
- self.comb += sink.ack.eq(1)
-
-
-class LiteEthPHYRGMIIRX(Module):
- def __init__(self, pads):
- self.source = source = Source(eth_phy_description(8))
-
- # # #
-
- rx_ctl = Signal()
- rx_data = Signal(8)
-
- self.specials += Instance("IDDR2",
- p_DDR_ALIGNMENT="C0", p_INIT_Q0=0, p_INIT_Q1=0, p_SRTYPE="ASYNC",
- i_C0=ClockSignal("eth_rx"), i_C1=~ClockSignal("eth_rx"),
- i_CE=1, i_S=0, i_R=0,
- i_D=pads.rx_ctl, o_Q1=rx_ctl,
- )
- for i in range(4):
- self.specials += Instance("IDDR2",
- p_DDR_ALIGNMENT="C0", p_INIT_Q0=0, p_INIT_Q1=0, p_SRTYPE="ASYNC",
- i_C0=ClockSignal("eth_rx"), i_C1=~ClockSignal("eth_rx"),
- i_CE=1, i_S=0, i_R=0,
- i_D=pads.rx_data[i], o_Q0=rx_data[4+i], o_Q1=rx_data[i],
- )
-
-
- rx_ctl_d = Signal()
- self.sync += rx_ctl_d.eq(rx_ctl)
-
- sop = Signal()
- eop = Signal()
- self.comb += [
- sop.eq(rx_ctl & ~rx_ctl_d),
- eop.eq(~rx_ctl & rx_ctl_d)
- ]
- self.sync += [
- source.stb.eq(rx_ctl),
- source.sop.eq(sop),
- source.data.eq(rx_data)
- ]
- self.comb += source.eop.eq(eop)
-
-
-class LiteEthPHYRGMIICRG(Module, AutoCSR):
- def __init__(self, clock_pads, pads, with_hw_init_reset):
- self._reset = CSRStorage()
-
- # # #
-
- self.clock_domains.cd_eth_rx = ClockDomain()
- self.clock_domains.cd_eth_tx = ClockDomain()
-
-
- # RX
- dcm_reset = Signal()
- dcm_locked = Signal()
-
- timer = WaitTimer(1024)
- fsm = FSM(reset_state="DCM_RESET")
- self.submodules += timer, fsm
-
- fsm.act("DCM_RESET",
- dcm_reset.eq(1),
- timer.wait.eq(1),
- If(timer.done,
- timer.wait.eq(0),
- NextState("DCM_WAIT")
- )
- )
- fsm.act("DCM_WAIT",
- timer.wait.eq(1),
- If(timer.done,
- NextState("DCM_CHECK_LOCK")
- )
- )
- fsm.act("DCM_CHECK_LOCK",
- If(~dcm_locked,
- NextState("DCM_RESET")
- )
- )
-
- clk90_rx = Signal()
- clk0_rx = Signal()
- clk0_rx_bufg = Signal()
- self.specials += Instance("DCM",
- i_CLKIN=clock_pads.rx,
- i_CLKFB=clk0_rx_bufg,
- o_CLK0=clk0_rx,
- o_CLK90=clk90_rx,
- o_LOCKED=dcm_locked,
- i_PSEN=0,
- i_PSCLK=0,
- i_PSINCDEC=0,
- i_RST=dcm_reset
- )
-
- self.specials += Instance("BUFG", i_I=clk0_rx, o_O=clk0_rx_bufg)
- self.specials += Instance("BUFG", i_I=clk90_rx, o_O=self.cd_eth_rx.clk)
-
- # TX
- self.specials += DDROutput(1, 0, clock_pads.tx, ClockSignal("eth_tx"))
- self.specials += Instance("BUFG", i_I=self.cd_eth_rx.clk, o_O=self.cd_eth_tx.clk)
-
- # Reset
- if with_hw_init_reset:
- reset = Signal()
- counter_done = Signal()
- self.submodules.counter = counter = Counter(max=512)
- self.comb += [
- counter_done.eq(counter.value == 256),
- counter.ce.eq(~counter_done),
- reset.eq(~counter_done | self._reset.storage)
- ]
- else:
- reset = self._reset.storage
- self.comb += pads.rst_n.eq(~reset)
- self.specials += [
- AsyncResetSynchronizer(self.cd_eth_tx, reset),
- AsyncResetSynchronizer(self.cd_eth_rx, reset),
- ]
-
-
-class LiteEthPHYRGMII(Module, AutoCSR):
- def __init__(self, clock_pads, pads, with_hw_init_reset=True):
- self.dw = 8
- self.submodules.crg = LiteEthPHYRGMIICRG(clock_pads,
- pads,
- with_hw_init_reset)
- self.submodules.tx = RenameClockDomains(LiteEthPHYRGMIITX(pads),
- "eth_tx")
- self.submodules.rx = RenameClockDomains(LiteEthPHYRGMIIRX(pads),
- "eth_rx")
- self.sink, self.source = self.tx.sink, self.rx.source
+++ /dev/null
-import os
-
-from misoc.com.liteethmini.common import *
-
-
-class LiteEthPHYSimCRG(Module, AutoCSR):
- def __init__(self):
- self._reset = CSRStorage()
-
- # # #
-
- self.clock_domains.cd_eth_rx = ClockDomain()
- self.clock_domains.cd_eth_tx = ClockDomain()
- self.comb += [
- self.cd_eth_rx.clk.eq(ClockSignal()),
- self.cd_eth_tx.clk.eq(ClockSignal())
- ]
-
- reset = self._reset.storage
- self.comb += [
- self.cd_eth_rx.rst.eq(reset),
- self.cd_eth_tx.rst.eq(reset)
- ]
-
-
-class LiteEthPHYSim(Module, AutoCSR):
- def __init__(self, pads, tap="tap0", ip_address="192.168.0.14"):
- self.dw = 8
- self.submodules.crg = LiteEthPHYSimCRG()
- self.sink = sink = Sink(eth_phy_description(8))
- self.source = source = Source(eth_phy_description(8))
- self.tap = tap
- self.ip_address = ip_address
-
- self.comb += [
- pads.source_stb.eq(self.sink.stb),
- pads.source_data.eq(self.sink.data),
- self.sink.ack.eq(1)
- ]
-
- self.sync += [
- self.source.stb.eq(pads.sink_stb),
- self.source.sop.eq(pads.sink_stb & ~self.source.stb),
- self.source.data.eq(pads.sink_data),
- ]
- self.comb += [
- self.source.eop.eq(~pads.sink_stb & self.source.stb),
- ]
-
- # XXX avoid use of os.system
- os.system("openvpn --mktun --dev {}".format(self.tap))
- os.system("ifconfig {} {} up".format(self.tap, self.ip_address))
- os.system("mknod /dev/net/{} c 10 200".format(self.tap))
-
- def do_exit(self, *args, **kwargs):
- # XXX avoid use of os.system
- os.system("rm -f /dev/net/{}".format(self.tap))
- os.system("openvpn --rmtun --dev {}".format(self.tap))
--- /dev/null
+from misoc.cores.minicon.core import Minicon, MiniconSettings
--- /dev/null
+from migen import *
+from migen.bus import wishbone
+from migen.genlib.fsm import FSM, NextState
+from migen.genlib.misc import optree, WaitTimer
+
+from misoc.mem.sdram.phy import dfi as dfibus
+
+
+class _AddressSlicer:
+ def __init__(self, colbits, bankbits, rowbits, address_align):
+ self.colbits = colbits
+ self.bankbits = bankbits
+ self.rowbits = rowbits
+ self.address_align = address_align
+ self.addressbits = colbits - address_align + bankbits + rowbits
+
+ def row(self, address):
+ split = self.bankbits + self.colbits - self.address_align
+ if isinstance(address, int):
+ return address >> split
+ else:
+ return address[split:self.addressbits]
+
+ def bank(self, address):
+ split = self.colbits - self.address_align
+ if isinstance(address, int):
+ return (address & (2**(split + self.bankbits) - 1)) >> split
+ else:
+ return address[split:split+self.bankbits]
+
+ def col(self, address):
+ split = self.colbits - self.address_align
+ if isinstance(address, int):
+ return (address & (2**split - 1)) << self.address_align
+ else:
+ return Cat(Replicate(0, self.address_align), address[:split])
+
+
+@DecorateModule(InsertReset)
+@DecorateModule(InsertCE)
+class _Bank(Module):
+ def __init__(self, geom_settings):
+ self.open = Signal()
+ self.row = Signal(geom_settings.rowbits)
+
+ self.idle = Signal(reset=1)
+ self.hit = Signal()
+
+ # # #
+
+ row = Signal(geom_settings.rowbits)
+ self.sync += \
+ If(self.open,
+ self.idle.eq(0),
+ row.eq(self.row)
+ )
+ self.comb += self.hit.eq(~self.idle & (self.row == row))
+
+
+class MiniconSettings:
+ def __init__(self, l2_size=0):
+ self.l2_size = l2_size
+
+
+class Minicon(Module):
+ def __init__(self, phy_settings, geom_settings, timing_settings):
+ if phy_settings.memtype in ["SDR"]:
+ burst_length = phy_settings.nphases*1 # command multiplication*SDR
+ elif phy_settings.memtype in ["DDR", "LPDDR", "DDR2", "DDR3"]:
+ burst_length = phy_settings.nphases*2 # command multiplication*DDR
+ burst_width = phy_settings.dfi_databits*phy_settings.nphases
+ address_align = log2_int(burst_length)
+
+ # # #
+
+ self.dfi = dfi = dfibus.Interface(geom_settings.addressbits,
+ geom_settings.bankbits,
+ phy_settings.dfi_databits,
+ phy_settings.nphases)
+
+ self.bus = bus = wishbone.Interface(burst_width)
+
+ rdphase = phy_settings.rdphase
+ wrphase = phy_settings.wrphase
+
+ precharge_all = Signal()
+ activate = Signal()
+ refresh = Signal()
+ write = Signal()
+ read = Signal()
+
+ # Compute current column, bank and row from wishbone address
+ slicer = _AddressSlicer(geom_settings.colbits,
+ geom_settings.bankbits,
+ geom_settings.rowbits,
+ address_align)
+
+ # Manage banks
+ bank_idle = Signal()
+ bank_hit = Signal()
+
+ banks = []
+ for i in range(2**geom_settings.bankbits):
+ bank = _Bank(geom_settings)
+ self.comb += [
+ bank.open.eq(activate),
+ bank.reset.eq(precharge_all),
+ bank.row.eq(slicer.row(bus.adr))
+ ]
+ banks.append(bank)
+ self.submodules += banks
+
+ cases = {}
+ for i, bank in enumerate(banks):
+ cases[i] = [bank.ce.eq(1)]
+ self.comb += Case(slicer.bank(bus.adr), cases)
+
+ self.comb += [
+ bank_hit.eq(optree("|", [bank.hit & bank.ce for bank in banks])),
+ bank_idle.eq(optree("|", [bank.idle & bank.ce for bank in banks])),
+ ]
+
+ # Timings
+ write2precharge_timer = WaitTimer(2 + timing_settings.tWR - 1)
+ self.submodules += write2precharge_timer
+ self.comb += write2precharge_timer.wait.eq(~write)
+
+ refresh_timer = WaitTimer(timing_settings.tREFI)
+ self.submodules += refresh_timer
+ self.comb += refresh_timer.wait.eq(~refresh)
+
+ # Main FSM
+ self.submodules.fsm = fsm = FSM()
+ fsm.act("IDLE",
+ If(refresh_timer.done,
+ NextState("PRECHARGE-ALL")
+ ).Elif(bus.stb & bus.cyc,
+ If(bank_hit,
+ If(bus.we,
+ NextState("WRITE")
+ ).Else(
+ NextState("READ")
+ )
+ ).Elif(~bank_idle,
+ If(write2precharge_timer.done,
+ NextState("PRECHARGE")
+ )
+ ).Else(
+ NextState("ACTIVATE")
+ )
+ )
+ )
+ fsm.act("READ",
+ read.eq(1),
+ dfi.phases[rdphase].ras_n.eq(1),
+ dfi.phases[rdphase].cas_n.eq(0),
+ dfi.phases[rdphase].we_n.eq(1),
+ dfi.phases[rdphase].rddata_en.eq(1),
+ NextState("WAIT-READ-DONE"),
+ )
+ fsm.act("WAIT-READ-DONE",
+ If(dfi.phases[rdphase].rddata_valid,
+ bus.ack.eq(1),
+ NextState("IDLE")
+ )
+ )
+ fsm.act("WRITE",
+ write.eq(1),
+ dfi.phases[wrphase].ras_n.eq(1),
+ dfi.phases[wrphase].cas_n.eq(0),
+ dfi.phases[wrphase].we_n.eq(0),
+ dfi.phases[wrphase].wrdata_en.eq(1),
+ NextState("WRITE-LATENCY")
+ )
+ fsm.act("WRITE-ACK",
+ bus.ack.eq(1),
+ NextState("IDLE")
+ )
+ fsm.act("PRECHARGE-ALL",
+ precharge_all.eq(1),
+ dfi.phases[rdphase].ras_n.eq(0),
+ dfi.phases[rdphase].cas_n.eq(1),
+ dfi.phases[rdphase].we_n.eq(0),
+ NextState("PRE-REFRESH")
+ )
+ fsm.act("PRECHARGE",
+ # do no reset bank since we are going to re-open it
+ dfi.phases[0].ras_n.eq(0),
+ dfi.phases[0].cas_n.eq(1),
+ dfi.phases[0].we_n.eq(0),
+ NextState("TRP")
+ )
+ fsm.act("ACTIVATE",
+ activate.eq(1),
+ dfi.phases[0].ras_n.eq(0),
+ dfi.phases[0].cas_n.eq(1),
+ dfi.phases[0].we_n.eq(1),
+ NextState("TRCD"),
+ )
+ fsm.act("REFRESH",
+ refresh.eq(1),
+ dfi.phases[rdphase].ras_n.eq(0),
+ dfi.phases[rdphase].cas_n.eq(0),
+ dfi.phases[rdphase].we_n.eq(1),
+ NextState("POST-REFRESH")
+ )
+ fsm.delayed_enter("WRITE-LATENCY", "WRITE-ACK", phy_settings.write_latency-1)
+ fsm.delayed_enter("TRP", "ACTIVATE", timing_settings.tRP-1)
+ fsm.delayed_enter("TRCD", "IDLE", timing_settings.tRCD-1)
+ fsm.delayed_enter("PRE-REFRESH", "REFRESH", timing_settings.tRP-1)
+ fsm.delayed_enter("POST-REFRESH", "IDLE", timing_settings.tRFC-1)
+
+ # DFI commands
+ for phase in dfi.phases:
+ if hasattr(phase, "reset_n"):
+ self.comb += phase.reset_n.eq(1)
+ if hasattr(phase, "odt"):
+ self.comb += phase.odt.eq(1)
+ self.comb += [
+ phase.cke.eq(1),
+ phase.cs_n.eq(0),
+ phase.bank.eq(slicer.bank(bus.adr)),
+ If(precharge_all,
+ phase.address.eq(2**10)
+ ).Elif(activate,
+ phase.address.eq(slicer.row(bus.adr))
+ ).Elif(write | read,
+ phase.address.eq(slicer.col(bus.adr))
+ )
+ ]
+
+ # DFI datapath
+ self.comb += [
+ bus.dat_r.eq(Cat(phase.rddata for phase in dfi.phases)),
+ Cat(phase.wrdata for phase in dfi.phases).eq(bus.dat_w),
+ Cat(phase.wrdata_mask for phase in dfi.phases).eq(~bus.sel),
+ ]
--- /dev/null
+from migen import *
+from migen.bus.transactions import TRead, TWrite
+from migen.bus import wishbone
+from migen.sim.generic import Simulator
+from migen.sim import icarus
+from mibuild.platforms import papilio_pro as board
+from misoc import sdram
+from misoc.mem.sdram.core.minicon import Minicon
+from misoc.mem.sdram.phy import gensdrphy
+from itertools import chain
+from os.path import isfile
+import sys
+
+clk_freq = 80000000
+
+from math import ceil
+
+
+def ns(t, margin=True):
+ clk_period_ns = 1000000000/clk_freq
+ if margin:
+ t += clk_period_ns/2
+ return ceil(t/clk_period_ns)
+
+
+class MiniconTB(Module):
+ def __init__(self, sdrphy, dfi, sdram_geom, sdram_timing, pads, sdram_clk):
+
+ self.clk_freq = 80000000
+ phy_settings = sdrphy.settings
+ rdphase = phy_settings.rdphase
+ self.submodules.slave = Minicon(phy_settings, sdram_geom, sdram_timing)
+
+ self.submodules.tap = wishbone.Tap(self.slave.bus)
+ self.submodules.dc = dc = wishbone.DownConverter(32, phy_settings.nphases*flen(dfi.phases[rdphase].rddata))
+ self.submodules.master = wishbone.Initiator(self.genxfers(), bus=dc.wishbone_i)
+ self.submodules.intercon = wishbone.InterconnectPointToPoint(dc.wishbone_o, self.slave.bus)
+
+ self.submodules.sdrphy = self.sdrphy = sdrphy
+ self.dfi = dfi
+ self.pads = pads
+
+ self.specials += Instance("mt48lc4m16a2",
+ io_Dq=pads.dq,
+ i_Addr=pads.a,
+ i_Ba=pads.ba,
+ i_Clk=ClockSignal(),
+ i_Cke=pads.cke,
+ i_Cs_n=pads.cs_n,
+ i_Ras_n=pads.ras_n,
+ i_Cas_n=pads.cas_n,
+ i_We_n=pads.we_n,
+ i_Dqm=pads.dm
+ )
+
+ def genxfers(self):
+ cycle = 0
+ for a in chain(range(4), range(256, 260), range(1024, 1028)):
+ t = TRead(a)
+ yield t
+ print("read {} in {} cycles".format(t.data, t.latency))
+ for a in chain(range(4), range(256, 260), range(1024, 1028), range(4096, 4100)):
+ t = TWrite(a, 0xaa55aa55+cycle)
+ cycle += 1
+ yield t
+ print("read {} in {} cycles".format(t.data, t.latency))
+ for a in chain(range(4), range(256, 260), range(1024, 1028), range(4096, 4100)):
+ t = TRead(a)
+ yield t
+ print("read {} in {} cycles".format(t.data, t.latency))
+
+ def gen_simulation(self, selfp):
+ dfi = selfp.dfi
+ phy = self.sdrphy
+ rdphase = phy.settings.rdphase
+ cycle = 0
+
+ while True:
+ yield
+
+
+class MyTopLevel:
+ def __init__(self, vcd_name=None, vcd_level=1,
+ top_name="top", dut_type="dut", dut_name="dut",
+ cd_name="sys", clk_period=10):
+ self.vcd_name = vcd_name
+ self.vcd_level = vcd_level
+ self.top_name = top_name
+ self.dut_type = dut_type
+ self.dut_name = dut_name
+
+ self._cd_name = cd_name
+ self._clk_period = clk_period
+
+ cd = ClockDomain(self._cd_name)
+ cd_ps = ClockDomain("sys_ps")
+ self.clock_domains = [cd, cd_ps]
+ self.ios = {cd.clk, cd.rst, cd_ps.clk}
+
+ def get(self, sockaddr):
+ template1 = """`timescale 1ns / 1ps
+
+module {top_name}();
+
+reg {clk_name};
+reg {rst_name};
+reg sys_ps_clk;
+
+initial begin
+ {rst_name} <= 1'b1;
+ @(posedge {clk_name});
+ {rst_name} <= 1'b0;
+end
+
+always begin
+ {clk_name} <= 1'b0;
+ #{hclk_period};
+ {clk_name} <= 1'b1;
+ #{hclk_period};
+end
+
+always @(posedge {clk_name} or negedge {clk_name})
+ sys_ps_clk <= #({hclk_period}*2-3) {clk_name};
+
+{dut_type} {dut_name}(
+ .{rst_name}({rst_name}),
+ .{clk_name}({clk_name}),
+ .sys_ps_clk(sys_ps_clk)
+);
+
+initial $migensim_connect("{sockaddr}");
+always @(posedge {clk_name}) $migensim_tick;
+"""
+ template2 = """
+initial begin
+ $dumpfile("{vcd_name}");
+ $dumpvars({vcd_level}, {dut_name});
+end
+"""
+ r = template1.format(top_name=self.top_name,
+ dut_type=self.dut_type,
+ dut_name=self.dut_name,
+ clk_name=self._cd_name + "_clk",
+ rst_name=self._cd_name + "_rst",
+ hclk_period=str(self._clk_period/2),
+ sockaddr=sockaddr)
+ if self.vcd_name is not None:
+ r += template2.format(vcd_name=self.vcd_name,
+ vcd_level=str(self.vcd_level),
+ dut_name=self.dut_name)
+ r += "\nendmodule"
+ return r
+
+
+if __name__ == "__main__":
+
+ plat = board.Platform()
+
+ sdram_geom = sdram.GeomSettings(
+ bankbits=2,
+ rowbits=12,
+ colbits=8
+ )
+
+ sdram_timing = sdram.TimingSettings(
+ tRP=ns(15),
+ tRCD=ns(15),
+ tWR=ns(14),
+ tWTR=2,
+ tREFI=ns(64*1000*1000/4096, False),
+ tRFC=ns(66),
+ req_queue_size=8,
+ read_time=32,
+ write_time=16
+ )
+
+ sdram_pads = plat.request("sdram")
+ sdram_clk = plat.request("sdram_clock")
+
+ sdrphy = gensdrphy.GENSDRPHY(sdram_pads)
+
+# This sets CL to 2 during LMR done on 1st cycle
+ sdram_pads.a.reset = 1<<5
+
+ s = MiniconTB(sdrphy, sdrphy.dfi, sdram_geom, sdram_timing, pads=sdram_pads, sdram_clk=sdram_clk)
+
+ extra_files = ["sdram_model/mt48lc4m16a2.v"]
+
+ if not isfile(extra_files[0]):
+ print("ERROR: You need to download Micron Verilog simulation model for MT48LC4M16A2 and put it in sdram_model/mt48lc4m16a2.v")
+ print("File can be downloaded from this URL: http://www.micron.com/-/media/documents/products/sim%20model/dram/dram/4054mt48lc4m16a2.zip")
+ sys.exit(1)
+
+ with Simulator(s, MyTopLevel("top.vcd", clk_period=int(1/0.08)), icarus.Runner(extra_files=extra_files, keep_files=True)) as sim:
+ sim.run(5000)
--- /dev/null
+from migen import *
+from migen.bus import wishbone
+from migen.genlib.fsm import FSM, NextState
+
+
+class NorFlash16(Module):
+ def __init__(self, pads, rd_timing, wr_timing):
+ self.bus = wishbone.Interface()
+
+ ###
+
+ data = TSTriple(16)
+ lsb = Signal()
+
+ self.specials += data.get_tristate(pads.d)
+ self.comb += [
+ data.oe.eq(pads.oe_n),
+ pads.ce_n.eq(0)
+ ]
+
+ load_lo = Signal()
+ load_hi = Signal()
+ store = Signal()
+
+ pads.oe_n.reset, pads.we_n.reset = 1, 1
+ self.sync += [
+ pads.oe_n.eq(1),
+ pads.we_n.eq(1),
+
+ # Register data/address to avoid off-chip glitches
+ If(self.bus.cyc & self.bus.stb,
+ pads.adr.eq(Cat(lsb, self.bus.adr)),
+ If(self.bus.we,
+ # Only 16-bit writes are supported. Assume sel=0011 or 1100.
+ If(self.bus.sel[0],
+ data.o.eq(self.bus.dat_w[:16])
+ ).Else(
+ data.o.eq(self.bus.dat_w[16:])
+ )
+ ).Else(
+ pads.oe_n.eq(0)
+ )
+ ),
+
+ If(load_lo, self.bus.dat_r[:16].eq(data.i)),
+ If(load_hi, self.bus.dat_r[16:].eq(data.i)),
+ If(store, pads.we_n.eq(0))
+ ]
+
+ # Typical timing of the flash chips:
+ # - 110ns address to output
+ # - 50ns write pulse width
+ counter = Signal(max=max(rd_timing, wr_timing)+1)
+ counter_en = Signal()
+ counter_wr_mode = Signal()
+ counter_done = Signal()
+ self.comb += counter_done.eq(counter == Mux(counter_wr_mode, wr_timing, rd_timing))
+ self.sync += If(counter_en & ~counter_done,
+ counter.eq(counter + 1)
+ ).Else(
+ counter.eq(0)
+ )
+
+ fsm = FSM()
+ self.submodules += fsm
+
+ fsm.act("IDLE",
+ If(self.bus.cyc & self.bus.stb,
+ If(self.bus.we,
+ NextState("WR")
+ ).Else(
+ NextState("RD_HI")
+ )
+ )
+ )
+ fsm.act("RD_HI",
+ lsb.eq(0),
+ counter_en.eq(1),
+ If(counter_done,
+ load_hi.eq(1),
+ NextState("RD_LO")
+ )
+ )
+ fsm.act("RD_LO",
+ lsb.eq(1),
+ counter_en.eq(1),
+ If(counter_done,
+ load_lo.eq(1),
+ NextState("ACK")
+ )
+ )
+ fsm.act("WR",
+ # supported cases: sel=0011 [lsb=1] and sel=1100 [lsb=0]
+ lsb.eq(self.bus.sel[0]),
+ counter_wr_mode.eq(1),
+ counter_en.eq(1),
+ store.eq(1),
+ If(counter_done, NextState("ACK"))
+ )
+ fsm.act("ACK",
+ self.bus.ack.eq(1),
+ NextState("IDLE")
+ )
+++ /dev/null
-from migen import *
-from migen.bus import wishbone
-from migen.genlib.fsm import FSM, NextState
-
-
-class NorFlash16(Module):
- def __init__(self, pads, rd_timing, wr_timing):
- self.bus = wishbone.Interface()
-
- ###
-
- data = TSTriple(16)
- lsb = Signal()
-
- self.specials += data.get_tristate(pads.d)
- self.comb += [
- data.oe.eq(pads.oe_n),
- pads.ce_n.eq(0)
- ]
-
- load_lo = Signal()
- load_hi = Signal()
- store = Signal()
-
- pads.oe_n.reset, pads.we_n.reset = 1, 1
- self.sync += [
- pads.oe_n.eq(1),
- pads.we_n.eq(1),
-
- # Register data/address to avoid off-chip glitches
- If(self.bus.cyc & self.bus.stb,
- pads.adr.eq(Cat(lsb, self.bus.adr)),
- If(self.bus.we,
- # Only 16-bit writes are supported. Assume sel=0011 or 1100.
- If(self.bus.sel[0],
- data.o.eq(self.bus.dat_w[:16])
- ).Else(
- data.o.eq(self.bus.dat_w[16:])
- )
- ).Else(
- pads.oe_n.eq(0)
- )
- ),
-
- If(load_lo, self.bus.dat_r[:16].eq(data.i)),
- If(load_hi, self.bus.dat_r[16:].eq(data.i)),
- If(store, pads.we_n.eq(0))
- ]
-
- # Typical timing of the flash chips:
- # - 110ns address to output
- # - 50ns write pulse width
- counter = Signal(max=max(rd_timing, wr_timing)+1)
- counter_en = Signal()
- counter_wr_mode = Signal()
- counter_done = Signal()
- self.comb += counter_done.eq(counter == Mux(counter_wr_mode, wr_timing, rd_timing))
- self.sync += If(counter_en & ~counter_done,
- counter.eq(counter + 1)
- ).Else(
- counter.eq(0)
- )
-
- fsm = FSM()
- self.submodules += fsm
-
- fsm.act("IDLE",
- If(self.bus.cyc & self.bus.stb,
- If(self.bus.we,
- NextState("WR")
- ).Else(
- NextState("RD_HI")
- )
- )
- )
- fsm.act("RD_HI",
- lsb.eq(0),
- counter_en.eq(1),
- If(counter_done,
- load_hi.eq(1),
- NextState("RD_LO")
- )
- )
- fsm.act("RD_LO",
- lsb.eq(1),
- counter_en.eq(1),
- If(counter_done,
- load_lo.eq(1),
- NextState("ACK")
- )
- )
- fsm.act("WR",
- # supported cases: sel=0011 [lsb=1] and sel=1100 [lsb=0]
- lsb.eq(self.bus.sel[0]),
- counter_wr_mode.eq(1),
- counter_en.eq(1),
- store.eq(1),
- If(counter_done, NextState("ACK"))
- )
- fsm.act("ACK",
- self.bus.ack.eq(1),
- NextState("IDLE")
- )
+++ /dev/null
-from collections import namedtuple
-
-PhySettingsT = namedtuple("PhySettings", "memtype dfi_databits nphases rdphase wrphase rdcmdphase wrcmdphase cl cwl read_latency write_latency")
-def PhySettings(memtype, dfi_databits, nphases, rdphase, wrphase, rdcmdphase, wrcmdphase, cl, read_latency, write_latency, cwl=0):
- return PhySettingsT(memtype, dfi_databits, nphases, rdphase, wrphase, rdcmdphase, wrcmdphase, cl, cwl, read_latency, write_latency)
-
-GeomSettingsT = namedtuple("_GeomSettings", "bankbits rowbits colbits addressbits")
-def GeomSettings(bankbits, rowbits, colbits):
- return GeomSettingsT(bankbits, rowbits, colbits, max(rowbits, colbits))
-
-TimingSettings = namedtuple("TimingSettings", "tRP tRCD tWR tWTR tREFI tRFC")
+++ /dev/null
-from migen import *
-from migen.genlib.record import *
-from migen.bank.description import *
-
-from misoc.mem.sdram.phy import dfii
-from misoc.mem.sdram.core import minicon, lasmicon
-from misoc.mem.sdram.core import lasmixbar
-
-
-class SDRAMCore(Module, AutoCSR):
- def __init__(self, phy, geom_settings, timing_settings, controller_settings, **kwargs):
- # DFI
- self.submodules.dfii = dfii.DFIInjector(geom_settings.addressbits, geom_settings.bankbits,
- phy.settings.dfi_databits, phy.settings.nphases)
- self.comb += Record.connect(self.dfii.master, phy.dfi)
-
- # LASMICON
- if isinstance(controller_settings, lasmicon.LASMIconSettings):
- self.submodules.controller = controller = lasmicon.LASMIcon(phy.settings,
- geom_settings,
- timing_settings,
- controller_settings,
- **kwargs)
- self.comb += Record.connect(controller.dfi, self.dfii.slave)
-
- self.submodules.crossbar = lasmixbar.LASMIxbar([controller.lasmic],
- controller.nrowbits)
-
- # MINICON
- elif isinstance(controller_settings, minicon.MiniconSettings):
- self.submodules.controller = controller = minicon.Minicon(phy.settings,
- geom_settings,
- timing_settings)
- self.comb += Record.connect(controller.dfi, self.dfii.slave)
- else:
- raise ValueError("Unsupported SDRAM controller type")
+++ /dev/null
-from migen import *
-from migen.bus.transactions import *
-from migen.genlib import roundrobin
-from migen.genlib.record import *
-from migen.genlib.misc import optree
-
-
-class Interface(Record):
- def __init__(self, aw, dw, nbanks, req_queue_size, read_latency, write_latency):
- self.aw = aw
- self.dw = dw
- self.nbanks = nbanks
- self.req_queue_size = req_queue_size
- self.read_latency = read_latency
- self.write_latency = write_latency
-
- bank_layout = [
- ("adr", aw, DIR_M_TO_S),
- ("we", 1, DIR_M_TO_S),
- ("stb", 1, DIR_M_TO_S),
- ("req_ack", 1, DIR_S_TO_M),
- ("dat_w_ack", 1, DIR_S_TO_M),
- ("dat_r_ack", 1, DIR_S_TO_M),
- ("lock", 1, DIR_S_TO_M)
- ]
- if nbanks > 1:
- layout = [("bank"+str(i), bank_layout) for i in range(nbanks)]
- else:
- layout = bank_layout
- layout += [
- ("dat_w", dw, DIR_M_TO_S),
- ("dat_we", dw//8, DIR_M_TO_S),
- ("dat_r", dw, DIR_S_TO_M)
- ]
- Record.__init__(self, layout)
-
-
-class Initiator(Module):
- def __init__(self, generator, bus):
- self.generator = generator
- self.bus = bus
- self.transaction_start = 0
- self.transaction = None
- self.transaction_end = None
-
- def do_simulation(self, selfp):
- selfp.bus.dat_w = 0
- selfp.bus.dat_we = 0
-
- if self.transaction is not None:
- if selfp.bus.req_ack:
- selfp.bus.stb = 0
- if selfp.bus.dat_ack:
- if isinstance(self.transaction, TRead):
- self.transaction_end = selfp.simulator.cycle_counter + self.bus.read_latency
- else:
- self.transaction_end = selfp.simulator.cycle_counter + self.bus.write_latency - 1
-
- if self.transaction is None or selfp.simulator.cycle_counter == self.transaction_end:
- if self.transaction is not None:
- self.transaction.latency = selfp.simulator.cycle_counter - self.transaction_start - 1
- if isinstance(self.transaction, TRead):
- self.transaction.data = selfp.bus.dat_r
- else:
- selfp.bus.dat_w = self.transaction.data
- selfp.bus.dat_we = self.transaction.sel
- try:
- self.transaction = next(self.generator)
- except StopIteration:
- raise StopSimulation
- if self.transaction is not None:
- self.transaction_start = selfp.simulator.cycle_counter
- selfp.bus.stb = 1
- selfp.bus.adr = self.transaction.address
- if isinstance(self.transaction, TRead):
- selfp.bus.we = 0
- else:
- selfp.bus.we = 1
-
-
-class TargetModel:
- def __init__(self):
- self.last_bank = 0
-
- def read(self, bank, address):
- return 0
-
- def write(self, bank, address, data, we):
- pass
-
- # Round-robin scheduling
- def select_bank(self, pending_banks):
- if not pending_banks:
- return -1
- self.last_bank += 1
- if self.last_bank > max(pending_banks):
- self.last_bank = 0
- while self.last_bank not in pending_banks:
- self.last_bank += 1
- return self.last_bank
-
-
-class _ReqFIFO(Module):
- def __init__(self, req_queue_size, bank):
- self.req_queue_size = req_queue_size
- self.bank = bank
- self.contents = []
-
- def do_simulation(self, selfp):
- if len(self.contents) < self.req_queue_size:
- if selfp.bank.stb:
- self.contents.append((selfp.bank.we, selfp.bank.adr))
- selfp.bank.req_ack = 1
- else:
- selfp.bank.req_ack = 0
- selfp.bank.lock = bool(self.contents)
- do_simulation.passive = True
-
-
-class Target(Module):
- def __init__(self, model, *ifargs, **ifkwargs):
- self.model = model
- self.bus = Interface(*ifargs, **ifkwargs)
- self.req_fifos = [_ReqFIFO(self.bus.req_queue_size, getattr(self.bus, "bank"+str(nb)))
- for nb in range(self.bus.nbanks)]
- self.submodules += self.req_fifos
- self.rd_pipeline = [None]*self.bus.read_latency
- self.wr_pipeline = [None]*(self.bus.write_latency + 1)
-
- def do_simulation(self, selfp):
- # determine banks with pending requests
- pending_banks = set(nb for nb, rf in enumerate(self.req_fifos) if rf.contents)
-
- # issue new transactions
- selected_bank_n = self.model.select_bank(pending_banks)
- selected_transaction = None
- for nb in range(self.bus.nbanks):
- bank = getattr(selfp.bus, "bank"+str(nb))
- if nb == selected_bank_n:
- bank.dat_ack = 1
- selected_transaction = self.req_fifos[nb].contents.pop(0)
- else:
- bank.dat_ack = 0
-
- rd_transaction = None
- wr_transaction = None
- if selected_bank_n >= 0:
- we, adr = selected_transaction
- if we:
- wr_transaction = selected_bank_n, adr
- else:
- rd_transaction = selected_bank_n, adr
-
- # data pipeline
- self.rd_pipeline.append(rd_transaction)
- self.wr_pipeline.append(wr_transaction)
- done_rd_transaction = self.rd_pipeline.pop(0)
- done_wr_transaction = self.wr_pipeline.pop(0)
- if done_rd_transaction is not None:
- selfp.bus.dat_r = self.model.read(done_rd_transaction[0], done_rd_transaction[1])
- if done_wr_transaction is not None:
- self.model.write(done_wr_transaction[0], done_wr_transaction[1],
- selfp.bus.dat_w, selfp.bus.dat_we)
- do_simulation.passive = True
+++ /dev/null
-from migen import *
-
-from misoc.mem.sdram.phy import dfi
-from misoc.mem.sdram.core import lasmibus
-from misoc.mem.sdram.core.lasmicon.refresher import *
-from misoc.mem.sdram.core.lasmicon.bankmachine import *
-from misoc.mem.sdram.core.lasmicon.multiplexer import *
-
-
-class LASMIconSettings:
- def __init__(self, req_queue_size=8,
- read_time=32, write_time=16,
- l2_size=8192,
- with_bandwidth=False,
- with_memtest=False,
- with_refresh=True):
- self.req_queue_size = req_queue_size
- self.read_time = read_time
- self.write_time = write_time
- self.l2_size = l2_size
- if with_memtest:
- self.with_bandwidth = True
- else:
- self.with_bandwidth = with_bandwidth
- self.with_memtest = with_memtest
- self.with_refresh = with_refresh
-
-
-class LASMIcon(Module):
- def __init__(self, phy_settings, geom_settings, timing_settings, controller_settings, **kwargs):
- if phy_settings.memtype in ["SDR"]:
- burst_length = phy_settings.nphases*1 # command multiplication*SDR
- elif phy_settings.memtype in ["DDR", "LPDDR", "DDR2", "DDR3"]:
- burst_length = phy_settings.nphases*2 # command multiplication*DDR
- address_align = log2_int(burst_length)
-
- self.dfi = dfi.Interface(geom_settings.addressbits,
- geom_settings.bankbits,
- phy_settings.dfi_databits,
- phy_settings.nphases)
- self.lasmic = lasmibus.Interface(
- aw=geom_settings.rowbits + geom_settings.colbits - address_align,
- dw=phy_settings.dfi_databits*phy_settings.nphases,
- nbanks=2**geom_settings.bankbits,
- req_queue_size=controller_settings.req_queue_size,
- read_latency=phy_settings.read_latency+1,
- write_latency=phy_settings.write_latency+1)
- self.nrowbits = geom_settings.colbits - address_align
-
- ###
-
- self.submodules.refresher = Refresher(geom_settings.addressbits, geom_settings.bankbits,
- timing_settings.tRP, timing_settings.tREFI, timing_settings.tRFC, enabled=controller_settings.with_refresh)
- self.submodules.bank_machines = [BankMachine(geom_settings, timing_settings, controller_settings, address_align, i,
- getattr(self.lasmic, "bank"+str(i)))
- for i in range(2**geom_settings.bankbits)]
- self.submodules.multiplexer = Multiplexer(phy_settings, geom_settings, timing_settings, controller_settings,
- self.bank_machines, self.refresher,
- self.dfi, self.lasmic,
- **kwargs)
-
- def get_csrs(self):
- return self.multiplexer.get_csrs()
+++ /dev/null
-from migen import *
-from migen.genlib.roundrobin import *
-from migen.genlib.fsm import FSM, NextState
-from migen.genlib.misc import optree
-from migen.genlib.fifo import SyncFIFO
-
-from misoc.mem.sdram.core.lasmicon.multiplexer import *
-
-
-class _AddressSlicer:
- def __init__(self, colbits, address_align):
- self.colbits = colbits
- self.address_align = address_align
-
- def row(self, address):
- split = self.colbits - self.address_align
- if isinstance(address, int):
- return address >> split
- else:
- return address[split:]
-
- def col(self, address):
- split = self.colbits - self.address_align
- if isinstance(address, int):
- return (address & (2**split - 1)) << self.address_align
- else:
- return Cat(Replicate(0, self.address_align), address[:split])
-
-
-class BankMachine(Module):
- def __init__(self, geom_settings, timing_settings, controller_settings, address_align, bankn, req):
- self.refresh_req = Signal()
- self.refresh_gnt = Signal()
- self.cmd = CommandRequestRW(geom_settings.addressbits, geom_settings.bankbits)
-
- ###
-
- # Request FIFO
- self.submodules.req_fifo = SyncFIFO([("we", 1), ("adr", flen(req.adr))],
- controller_settings.req_queue_size)
- self.comb += [
- self.req_fifo.din.we.eq(req.we),
- self.req_fifo.din.adr.eq(req.adr),
- self.req_fifo.we.eq(req.stb),
- req.req_ack.eq(self.req_fifo.writable),
-
- self.req_fifo.re.eq(req.dat_w_ack | req.dat_r_ack),
- req.lock.eq(self.req_fifo.readable)
- ]
- reqf = self.req_fifo.dout
-
- slicer = _AddressSlicer(geom_settings.colbits, address_align)
-
- # Row tracking
- has_openrow = Signal()
- openrow = Signal(geom_settings.rowbits)
- hit = Signal()
- self.comb += hit.eq(openrow == slicer.row(reqf.adr))
- track_open = Signal()
- track_close = Signal()
- self.sync += [
- If(track_open,
- has_openrow.eq(1),
- openrow.eq(slicer.row(reqf.adr))
- ),
- If(track_close,
- has_openrow.eq(0)
- )
- ]
-
- # Address generation
- s_row_adr = Signal()
- self.comb += [
- self.cmd.ba.eq(bankn),
- If(s_row_adr,
- self.cmd.a.eq(slicer.row(reqf.adr))
- ).Else(
- self.cmd.a.eq(slicer.col(reqf.adr))
- )
- ]
-
- # Respect write-to-precharge specification
- precharge_ok = Signal()
- t_unsafe_precharge = 2 + timing_settings.tWR - 1
- unsafe_precharge_count = Signal(max=t_unsafe_precharge+1)
- self.comb += precharge_ok.eq(unsafe_precharge_count == 0)
- self.sync += [
- If(self.cmd.stb & self.cmd.ack & self.cmd.is_write,
- unsafe_precharge_count.eq(t_unsafe_precharge)
- ).Elif(~precharge_ok,
- unsafe_precharge_count.eq(unsafe_precharge_count-1)
- )
- ]
-
- # Control and command generation FSM
- fsm = FSM()
- self.submodules += fsm
- fsm.act("REGULAR",
- If(self.refresh_req,
- NextState("REFRESH")
- ).Elif(self.req_fifo.readable,
- If(has_openrow,
- If(hit,
- # NB: write-to-read specification is enforced by multiplexer
- self.cmd.stb.eq(1),
- req.dat_w_ack.eq(self.cmd.ack & reqf.we),
- req.dat_r_ack.eq(self.cmd.ack & ~reqf.we),
- self.cmd.is_read.eq(~reqf.we),
- self.cmd.is_write.eq(reqf.we),
- self.cmd.cas_n.eq(0),
- self.cmd.we_n.eq(~reqf.we)
- ).Else(
- NextState("PRECHARGE")
- )
- ).Else(
- NextState("ACTIVATE")
- )
- )
- )
- fsm.act("PRECHARGE",
- # Notes:
- # 1. we are presenting the column address, A10 is always low
- # 2. since we always go to the ACTIVATE state, we do not need
- # to assert track_close.
- If(precharge_ok,
- self.cmd.stb.eq(1),
- If(self.cmd.ack, NextState("TRP")),
- self.cmd.ras_n.eq(0),
- self.cmd.we_n.eq(0),
- self.cmd.is_cmd.eq(1)
- )
- )
- fsm.act("ACTIVATE",
- s_row_adr.eq(1),
- track_open.eq(1),
- self.cmd.stb.eq(1),
- self.cmd.is_cmd.eq(1),
- If(self.cmd.ack, NextState("TRCD")),
- self.cmd.ras_n.eq(0)
- )
- fsm.act("REFRESH",
- self.refresh_gnt.eq(precharge_ok),
- track_close.eq(1),
- self.cmd.is_cmd.eq(1),
- If(~self.refresh_req, NextState("REGULAR"))
- )
- fsm.delayed_enter("TRP", "ACTIVATE", timing_settings.tRP-1)
- fsm.delayed_enter("TRCD", "REGULAR", timing_settings.tRCD-1)
+++ /dev/null
-from migen import *
-from migen.genlib.roundrobin import *
-from migen.genlib.misc import optree
-from migen.genlib.fsm import FSM, NextState
-from migen.bank.description import AutoCSR
-
-from misoc.mem.sdram.core.lasmicon.perf import Bandwidth
-
-
-class CommandRequest:
- def __init__(self, a, ba):
- self.a = Signal(a)
- self.ba = Signal(ba)
- self.cas_n = Signal(reset=1)
- self.ras_n = Signal(reset=1)
- self.we_n = Signal(reset=1)
-
-
-class CommandRequestRW(CommandRequest):
- def __init__(self, a, ba):
- CommandRequest.__init__(self, a, ba)
- self.stb = Signal()
- self.ack = Signal()
- self.is_cmd = Signal()
- self.is_read = Signal()
- self.is_write = Signal()
-
-
-class _CommandChooser(Module):
- def __init__(self, requests):
- self.want_reads = Signal()
- self.want_writes = Signal()
- self.want_cmds = Signal()
- # NB: cas_n/ras_n/we_n are 1 when stb is inactive
- self.cmd = CommandRequestRW(flen(requests[0].a), flen(requests[0].ba))
-
- ###
-
- rr = RoundRobin(len(requests), SP_CE)
- self.submodules += rr
-
- self.comb += [rr.request[i].eq(req.stb & ((req.is_cmd & self.want_cmds) | ((req.is_read == self.want_reads) | (req.is_write == self.want_writes))))
- for i, req in enumerate(requests)]
-
- stb = Signal()
- self.comb += stb.eq(Array(req.stb for req in requests)[rr.grant])
- for name in ["a", "ba", "is_read", "is_write", "is_cmd"]:
- choices = Array(getattr(req, name) for req in requests)
- self.comb += getattr(self.cmd, name).eq(choices[rr.grant])
- for name in ["cas_n", "ras_n", "we_n"]:
- # we should only assert those signals when stb is 1
- choices = Array(getattr(req, name) for req in requests)
- self.comb += If(self.cmd.stb, getattr(self.cmd, name).eq(choices[rr.grant]))
- self.comb += self.cmd.stb.eq(stb \
- & ((self.cmd.is_cmd & self.want_cmds) | ((self.cmd.is_read == self.want_reads) \
- & (self.cmd.is_write == self.want_writes))))
-
- self.comb += [If(self.cmd.stb & self.cmd.ack & (rr.grant == i), req.ack.eq(1))
- for i, req in enumerate(requests)]
- self.comb += rr.ce.eq(self.cmd.ack)
-
-
-class _Steerer(Module):
- def __init__(self, commands, dfi):
- ncmd = len(commands)
- nph = len(dfi.phases)
- self.sel = [Signal(max=ncmd) for i in range(nph)]
-
- ###
-
- def stb_and(cmd, attr):
- if not hasattr(cmd, "stb"):
- return 0
- else:
- return cmd.stb & getattr(cmd, attr)
- for phase, sel in zip(dfi.phases, self.sel):
- self.comb += [
- phase.cke.eq(1),
- phase.cs_n.eq(0)
- ]
- if hasattr(phase, "odt"):
- self.comb += phase.odt.eq(1)
- if hasattr(phase, "reset_n"):
- self.comb += phase.reset_n.eq(1)
- self.sync += [
- phase.address.eq(Array(cmd.a for cmd in commands)[sel]),
- phase.bank.eq(Array(cmd.ba for cmd in commands)[sel]),
- phase.cas_n.eq(Array(cmd.cas_n for cmd in commands)[sel]),
- phase.ras_n.eq(Array(cmd.ras_n for cmd in commands)[sel]),
- phase.we_n.eq(Array(cmd.we_n for cmd in commands)[sel]),
- phase.rddata_en.eq(Array(stb_and(cmd, "is_read") for cmd in commands)[sel]),
- phase.wrdata_en.eq(Array(stb_and(cmd, "is_write") for cmd in commands)[sel])
- ]
-
-
-class Multiplexer(Module, AutoCSR):
- def __init__(self, phy_settings, geom_settings, timing_settings, controller_settings, bank_machines, refresher, dfi, lasmic,
- with_bandwidth=False):
- assert(phy_settings.nphases == len(dfi.phases))
- self.phy_settings = phy_settings
-
- # Command choosing
- requests = [bm.cmd for bm in bank_machines]
- self.submodules.choose_cmd = choose_cmd = _CommandChooser(requests)
- self.submodules.choose_req = choose_req = _CommandChooser(requests)
- self.comb += [
- choose_cmd.want_reads.eq(0),
- choose_cmd.want_writes.eq(0)
- ]
- if phy_settings.nphases == 1:
- self.comb += [
- choose_cmd.want_cmds.eq(1),
- choose_req.want_cmds.eq(1)
- ]
-
- # Command steering
- nop = CommandRequest(geom_settings.addressbits, geom_settings.bankbits)
- commands = [nop, choose_cmd.cmd, choose_req.cmd, refresher.cmd] # nop must be 1st
- (STEER_NOP, STEER_CMD, STEER_REQ, STEER_REFRESH) = range(4)
- steerer = _Steerer(commands, dfi)
- self.submodules += steerer
-
- # Read/write turnaround
- read_available = Signal()
- write_available = Signal()
- self.comb += [
- read_available.eq(optree("|", [req.stb & req.is_read for req in requests])),
- write_available.eq(optree("|", [req.stb & req.is_write for req in requests]))
- ]
-
- def anti_starvation(timeout):
- en = Signal()
- max_time = Signal()
- if timeout:
- t = timeout - 1
- time = Signal(max=t+1)
- self.comb += max_time.eq(time == 0)
- self.sync += If(~en,
- time.eq(t)
- ).Elif(~max_time,
- time.eq(time - 1)
- )
- else:
- self.comb += max_time.eq(0)
- return en, max_time
- read_time_en, max_read_time = anti_starvation(controller_settings.read_time)
- write_time_en, max_write_time = anti_starvation(controller_settings.write_time)
-
- # Refresh
- self.comb += [bm.refresh_req.eq(refresher.req) for bm in bank_machines]
- go_to_refresh = Signal()
- self.comb += go_to_refresh.eq(optree("&", [bm.refresh_gnt for bm in bank_machines]))
-
- # Datapath
- all_rddata = [p.rddata for p in dfi.phases]
- all_wrdata = [p.wrdata for p in dfi.phases]
- all_wrdata_mask = [p.wrdata_mask for p in dfi.phases]
- self.comb += [
- lasmic.dat_r.eq(Cat(*all_rddata)),
- Cat(*all_wrdata).eq(lasmic.dat_w),
- Cat(*all_wrdata_mask).eq(~lasmic.dat_we)
- ]
-
- # Control FSM
- fsm = FSM()
- self.submodules += fsm
-
- def steerer_sel(steerer, phy_settings, r_w_n):
- r = []
- for i in range(phy_settings.nphases):
- s = steerer.sel[i].eq(STEER_NOP)
- if r_w_n == "read":
- if i == phy_settings.rdphase:
- s = steerer.sel[i].eq(STEER_REQ)
- elif i == phy_settings.rdcmdphase:
- s = steerer.sel[i].eq(STEER_CMD)
- elif r_w_n == "write":
- if i == phy_settings.wrphase:
- s = steerer.sel[i].eq(STEER_REQ)
- elif i == phy_settings.wrcmdphase:
- s = steerer.sel[i].eq(STEER_CMD)
- else:
- raise ValueError
- r.append(s)
- return r
-
- fsm.act("READ",
- read_time_en.eq(1),
- choose_req.want_reads.eq(1),
- choose_cmd.cmd.ack.eq(1),
- choose_req.cmd.ack.eq(1),
- steerer_sel(steerer, phy_settings, "read"),
- If(write_available,
- # TODO: switch only after several cycles of ~read_available?
- If(~read_available | max_read_time, NextState("RTW"))
- ),
- If(go_to_refresh, NextState("REFRESH"))
- )
- fsm.act("WRITE",
- write_time_en.eq(1),
- choose_req.want_writes.eq(1),
- choose_cmd.cmd.ack.eq(1),
- choose_req.cmd.ack.eq(1),
- steerer_sel(steerer, phy_settings, "write"),
- If(read_available,
- If(~write_available | max_write_time, NextState("WTR"))
- ),
- If(go_to_refresh, NextState("REFRESH"))
- )
- fsm.act("REFRESH",
- steerer.sel[0].eq(STEER_REFRESH),
- If(~refresher.req, NextState("READ"))
- )
- fsm.delayed_enter("RTW", "WRITE", phy_settings.read_latency-1) # FIXME: reduce this, actual limit is around (cl+1)/nphases
- fsm.delayed_enter("WTR", "READ", timing_settings.tWTR-1)
- # FIXME: workaround for zero-delay loop simulation problem with Icarus Verilog
- fsm.finalize()
- self.comb += refresher.ack.eq(fsm.state == fsm.encoding["REFRESH"])
-
- self.with_bandwidth = with_bandwidth
-
- def add_bandwidth(self):
- self.with_bandwidth = True
-
- def do_finalize(self):
- if self.with_bandwidth:
- data_width = self.phy_settings.dfi_databits*self.phy_settings.nphases
- self.submodules.bandwidth = Bandwidth(self.choose_req.cmd, data_width)
+++ /dev/null
-from migen import *
-from migen.bank.description import *
-
-
-class Bandwidth(Module, AutoCSR):
- def __init__(self, cmd, data_width, period_bits=24):
- self._update = CSR()
- self._nreads = CSRStatus(period_bits)
- self._nwrites = CSRStatus(period_bits)
- self._data_width = CSRStatus(bits_for(data_width), reset=data_width)
-
- ###
-
- cmd_stb = Signal()
- cmd_ack = Signal()
- cmd_is_read = Signal()
- cmd_is_write = Signal()
- self.sync += [
- cmd_stb.eq(cmd.stb),
- cmd_ack.eq(cmd.ack),
- cmd_is_read.eq(cmd.is_read),
- cmd_is_write.eq(cmd.is_write)
- ]
-
- counter = Signal(period_bits)
- period = Signal()
- nreads = Signal(period_bits)
- nwrites = Signal(period_bits)
- nreads_r = Signal(period_bits)
- nwrites_r = Signal(period_bits)
- self.sync += [
- Cat(counter, period).eq(counter + 1),
- If(period,
- nreads_r.eq(nreads),
- nwrites_r.eq(nwrites),
- nreads.eq(0),
- nwrites.eq(0)
- ).Elif(cmd_stb & cmd_ack,
- If(cmd_is_read, nreads.eq(nreads + 1)),
- If(cmd_is_write, nwrites.eq(nwrites + 1)),
- ),
- If(self._update.re,
- self._nreads.status.eq(nreads_r),
- self._nwrites.status.eq(nwrites_r)
- )
- ]
+++ /dev/null
-from migen import *
-from migen.genlib.misc import timeline
-from migen.genlib.fsm import FSM
-
-from misoc.mem.sdram.core.lasmicon.multiplexer import *
-
-
-class Refresher(Module):
- def __init__(self, a, ba, tRP, tREFI, tRFC, enabled=True):
- self.req = Signal()
- self.ack = Signal() # 1st command 1 cycle after assertion of ack
- self.cmd = CommandRequest(a, ba)
-
- ###
-
- if enabled:
- # Refresh sequence generator:
- # PRECHARGE ALL --(tRP)--> AUTO REFRESH --(tRFC)--> done
- seq_start = Signal()
- seq_done = Signal()
- self.sync += [
- self.cmd.a.eq(2**10),
- self.cmd.ba.eq(0),
- self.cmd.cas_n.eq(1),
- self.cmd.ras_n.eq(1),
- self.cmd.we_n.eq(1),
- seq_done.eq(0)
- ]
- self.sync += timeline(seq_start, [
- (1, [
- self.cmd.ras_n.eq(0),
- self.cmd.we_n.eq(0)
- ]),
- (1+tRP, [
- self.cmd.cas_n.eq(0),
- self.cmd.ras_n.eq(0)
- ]),
- (1+tRP+tRFC, [
- seq_done.eq(1)
- ])
- ])
-
- # Periodic refresh counter
- counter = Signal(max=tREFI)
- start = Signal()
- self.sync += [
- start.eq(0),
- If(counter == 0,
- start.eq(1),
- counter.eq(tREFI - 1)
- ).Else(
- counter.eq(counter - 1)
- )
- ]
-
- # Control FSM
- fsm = FSM()
- self.submodules += fsm
- fsm.act("IDLE", If(start, NextState("WAIT_GRANT")))
- fsm.act("WAIT_GRANT",
- self.req.eq(1),
- If(self.ack,
- seq_start.eq(1),
- NextState("WAIT_SEQ")
- )
- )
- fsm.act("WAIT_SEQ",
- self.req.eq(1),
- If(seq_done, NextState("IDLE"))
- )
+++ /dev/null
-from migen import *
-from migen.genlib import roundrobin
-from migen.genlib.record import *
-from migen.genlib.misc import optree
-
-from misoc.mem.sdram.core.lasmibus import Interface
-
-
-def _getattr_all(l, attr):
- it = iter(l)
- r = getattr(next(it), attr)
- for e in it:
- if getattr(e, attr) != r:
- raise ValueError
- return r
-
-
-class LASMIxbar(Module):
- def __init__(self, controllers, cba_shift):
- self._controllers = controllers
- self._cba_shift = cba_shift
-
- self._rca_bits = _getattr_all(controllers, "aw")
- self._dw = _getattr_all(controllers, "dw")
- self._nbanks = _getattr_all(controllers, "nbanks")
- self._req_queue_size = _getattr_all(controllers, "req_queue_size")
- self._read_latency = _getattr_all(controllers, "read_latency")
- self._write_latency = _getattr_all(controllers, "write_latency")
-
- self._bank_bits = log2_int(self._nbanks, False)
- self._controller_bits = log2_int(len(self._controllers), False)
-
- self._masters = []
-
- def get_master(self):
- if self.finalized:
- raise FinalizeError
- lasmi_master = Interface(self._rca_bits + self._bank_bits + self._controller_bits,
- self._dw, 1, self._req_queue_size, self._read_latency, self._write_latency)
- self._masters.append(lasmi_master)
- return lasmi_master
-
- def do_finalize(self):
- nmasters = len(self._masters)
-
- m_ca, m_ba, m_rca = self._split_master_addresses(self._controller_bits,
- self._bank_bits, self._rca_bits, self._cba_shift)
-
- for nc, controller in enumerate(self._controllers):
- if self._controller_bits:
- controller_selected = [ca == nc for ca in m_ca]
- else:
- controller_selected = [1]*nmasters
- master_req_acks = [0]*nmasters
- master_dat_w_acks = [0]*nmasters
- master_dat_r_acks = [0]*nmasters
-
- rrs = [roundrobin.RoundRobin(nmasters, roundrobin.SP_CE) for n in range(self._nbanks)]
- self.submodules += rrs
- for nb, rr in enumerate(rrs):
- bank = getattr(controller, "bank"+str(nb))
-
- # for each master, determine if another bank locks it
- master_locked = []
- for nm, master in enumerate(self._masters):
- locked = 0
- for other_nb, other_rr in enumerate(rrs):
- if other_nb != nb:
- other_bank = getattr(controller, "bank"+str(other_nb))
- locked = locked | (other_bank.lock & (other_rr.grant == nm))
- master_locked.append(locked)
-
- # arbitrate
- bank_selected = [cs & (ba == nb) & ~locked for cs, ba, locked in zip(controller_selected, m_ba, master_locked)]
- bank_requested = [bs & master.stb for bs, master in zip(bank_selected, self._masters)]
- self.comb += [
- rr.request.eq(Cat(*bank_requested)),
- rr.ce.eq(~bank.stb & ~bank.lock)
- ]
-
- # route requests
- self.comb += [
- bank.adr.eq(Array(m_rca)[rr.grant]),
- bank.we.eq(Array(self._masters)[rr.grant].we),
- bank.stb.eq(Array(bank_requested)[rr.grant])
- ]
- master_req_acks = [master_req_ack | ((rr.grant == nm) & bank_selected[nm] & bank.req_ack)
- for nm, master_req_ack in enumerate(master_req_acks)]
- master_dat_w_acks = [master_dat_w_ack | ((rr.grant == nm) & bank.dat_w_ack)
- for nm, master_dat_w_ack in enumerate(master_dat_w_acks)]
- master_dat_r_acks = [master_dat_r_ack | ((rr.grant == nm) & bank.dat_r_ack)
- for nm, master_dat_r_ack in enumerate(master_dat_r_acks)]
-
- for nm, master_dat_w_ack in enumerate(master_dat_w_acks):
- for i in range(self._write_latency):
- new_master_dat_w_ack = Signal()
- self.sync += new_master_dat_w_ack.eq(master_dat_w_ack)
- master_dat_w_ack = new_master_dat_w_ack
- master_dat_w_acks[nm] = master_dat_w_ack
-
- for nm, master_dat_r_ack in enumerate(master_dat_r_acks):
- for i in range(self._read_latency):
- new_master_dat_r_ack = Signal()
- self.sync += new_master_dat_r_ack.eq(master_dat_r_ack)
- master_dat_r_ack = new_master_dat_r_ack
- master_dat_r_acks[nm] = master_dat_r_ack
-
- self.comb += [master.req_ack.eq(master_req_ack) for master, master_req_ack in zip(self._masters, master_req_acks)]
- self.comb += [master.dat_w_ack.eq(master_dat_w_ack) for master, master_dat_w_ack in zip(self._masters, master_dat_w_acks)]
- self.comb += [master.dat_r_ack.eq(master_dat_r_ack) for master, master_dat_r_ack in zip(self._masters, master_dat_r_acks)]
-
- # route data writes
- controller_selected_wl = controller_selected
- for i in range(self._write_latency):
- n_controller_selected_wl = [Signal() for i in range(nmasters)]
- self.sync += [n.eq(o) for n, o in zip(n_controller_selected_wl, controller_selected_wl)]
- controller_selected_wl = n_controller_selected_wl
- dat_w_maskselect = []
- dat_we_maskselect = []
- for master, selected in zip(self._masters, controller_selected_wl):
- o_dat_w = Signal(self._dw)
- o_dat_we = Signal(self._dw//8)
- self.comb += If(selected,
- o_dat_w.eq(master.dat_w),
- o_dat_we.eq(master.dat_we)
- )
- dat_w_maskselect.append(o_dat_w)
- dat_we_maskselect.append(o_dat_we)
- self.comb += [
- controller.dat_w.eq(optree("|", dat_w_maskselect)),
- controller.dat_we.eq(optree("|", dat_we_maskselect))
- ]
-
- # route data reads
- if self._controller_bits:
- for master in self._masters:
- controller_sel = Signal(self._controller_bits)
- for nc, controller in enumerate(self._controllers):
- for nb in range(nbanks):
- bank = getattr(controller, "bank"+str(nb))
- self.comb += If(bank.stb & bank.ack, controller_sel.eq(nc))
- for i in range(self._read_latency):
- n_controller_sel = Signal(self._controller_bits)
- self.sync += n_controller_sel.eq(controller_sel)
- controller_sel = n_controller_sel
- self.comb += master.dat_r.eq(Array(self._controllers)[controller_sel].dat_r)
- else:
- self.comb += [master.dat_r.eq(self._controllers[0].dat_r) for master in self._masters]
-
- def _split_master_addresses(self, controller_bits, bank_bits, rca_bits, cba_shift):
- m_ca = [] # controller address
- m_ba = [] # bank address
- m_rca = [] # row and column address
- for master in self._masters:
- cba = Signal(self._controller_bits + self._bank_bits)
- rca = Signal(self._rca_bits)
- cba_upper = cba_shift + controller_bits + bank_bits
- self.comb += cba.eq(master.adr[cba_shift:cba_upper])
- if cba_shift < self._rca_bits:
- if cba_shift:
- self.comb += rca.eq(Cat(master.adr[:cba_shift], master.adr[cba_upper:]))
- else:
- self.comb += rca.eq(master.adr[cba_upper:])
- else:
- self.comb += rca.eq(master.adr[:cba_shift])
-
- if self._controller_bits:
- ca = Signal(self._controller_bits)
- ba = Signal(self._bank_bits)
- self.comb += Cat(ba, ca).eq(cba)
- else:
- ca = None
- ba = cba
-
- m_ca.append(ca)
- m_ba.append(ba)
- m_rca.append(rca)
- return m_ca, m_ba, m_rca
+++ /dev/null
-from migen import *
-from migen.bus import wishbone
-from migen.genlib.fsm import FSM, NextState
-from migen.genlib.misc import optree, WaitTimer
-
-from misoc.mem.sdram.phy import dfi as dfibus
-
-
-class _AddressSlicer:
- def __init__(self, colbits, bankbits, rowbits, address_align):
- self.colbits = colbits
- self.bankbits = bankbits
- self.rowbits = rowbits
- self.address_align = address_align
- self.addressbits = colbits - address_align + bankbits + rowbits
-
- def row(self, address):
- split = self.bankbits + self.colbits - self.address_align
- if isinstance(address, int):
- return address >> split
- else:
- return address[split:self.addressbits]
-
- def bank(self, address):
- split = self.colbits - self.address_align
- if isinstance(address, int):
- return (address & (2**(split + self.bankbits) - 1)) >> split
- else:
- return address[split:split+self.bankbits]
-
- def col(self, address):
- split = self.colbits - self.address_align
- if isinstance(address, int):
- return (address & (2**split - 1)) << self.address_align
- else:
- return Cat(Replicate(0, self.address_align), address[:split])
-
-
-@DecorateModule(InsertReset)
-@DecorateModule(InsertCE)
-class _Bank(Module):
- def __init__(self, geom_settings):
- self.open = Signal()
- self.row = Signal(geom_settings.rowbits)
-
- self.idle = Signal(reset=1)
- self.hit = Signal()
-
- # # #
-
- row = Signal(geom_settings.rowbits)
- self.sync += \
- If(self.open,
- self.idle.eq(0),
- row.eq(self.row)
- )
- self.comb += self.hit.eq(~self.idle & (self.row == row))
-
-
-class MiniconSettings:
- def __init__(self, l2_size=0):
- self.l2_size = l2_size
-
-
-class Minicon(Module):
- def __init__(self, phy_settings, geom_settings, timing_settings):
- if phy_settings.memtype in ["SDR"]:
- burst_length = phy_settings.nphases*1 # command multiplication*SDR
- elif phy_settings.memtype in ["DDR", "LPDDR", "DDR2", "DDR3"]:
- burst_length = phy_settings.nphases*2 # command multiplication*DDR
- burst_width = phy_settings.dfi_databits*phy_settings.nphases
- address_align = log2_int(burst_length)
-
- # # #
-
- self.dfi = dfi = dfibus.Interface(geom_settings.addressbits,
- geom_settings.bankbits,
- phy_settings.dfi_databits,
- phy_settings.nphases)
-
- self.bus = bus = wishbone.Interface(burst_width)
-
- rdphase = phy_settings.rdphase
- wrphase = phy_settings.wrphase
-
- precharge_all = Signal()
- activate = Signal()
- refresh = Signal()
- write = Signal()
- read = Signal()
-
- # Compute current column, bank and row from wishbone address
- slicer = _AddressSlicer(geom_settings.colbits,
- geom_settings.bankbits,
- geom_settings.rowbits,
- address_align)
-
- # Manage banks
- bank_open = Signal()
- bank_idle = Signal()
- bank_hit = Signal()
-
- banks = []
- for i in range(2**geom_settings.bankbits):
- bank = _Bank(geom_settings)
- self.comb += [
- bank.open.eq(activate),
- bank.reset.eq(precharge_all),
- bank.row.eq(slicer.row(bus.adr))
- ]
- banks.append(bank)
- self.submodules += banks
-
- cases = {}
- for i, bank in enumerate(banks):
- cases[i] = [bank.ce.eq(1)]
- self.comb += Case(slicer.bank(bus.adr), cases)
-
- self.comb += [
- bank_hit.eq(optree("|", [bank.hit & bank.ce for bank in banks])),
- bank_idle.eq(optree("|", [bank.idle & bank.ce for bank in banks])),
- ]
-
- # Timings
- write2precharge_timer = WaitTimer(2 + timing_settings.tWR - 1)
- self.submodules += write2precharge_timer
- self.comb += write2precharge_timer.wait.eq(~write)
-
- refresh_timer = WaitTimer(timing_settings.tREFI)
- self.submodules += refresh_timer
- self.comb += refresh_timer.wait.eq(~refresh)
-
- # Main FSM
- self.submodules.fsm = fsm = FSM()
- fsm.act("IDLE",
- If(refresh_timer.done,
- NextState("PRECHARGE-ALL")
- ).Elif(bus.stb & bus.cyc,
- If(bank_hit,
- If(bus.we,
- NextState("WRITE")
- ).Else(
- NextState("READ")
- )
- ).Elif(~bank_idle,
- If(write2precharge_timer.done,
- NextState("PRECHARGE")
- )
- ).Else(
- NextState("ACTIVATE")
- )
- )
- )
- fsm.act("READ",
- read.eq(1),
- dfi.phases[rdphase].ras_n.eq(1),
- dfi.phases[rdphase].cas_n.eq(0),
- dfi.phases[rdphase].we_n.eq(1),
- dfi.phases[rdphase].rddata_en.eq(1),
- NextState("WAIT-READ-DONE"),
- )
- fsm.act("WAIT-READ-DONE",
- If(dfi.phases[rdphase].rddata_valid,
- bus.ack.eq(1),
- NextState("IDLE")
- )
- )
- fsm.act("WRITE",
- write.eq(1),
- dfi.phases[wrphase].ras_n.eq(1),
- dfi.phases[wrphase].cas_n.eq(0),
- dfi.phases[wrphase].we_n.eq(0),
- dfi.phases[wrphase].wrdata_en.eq(1),
- NextState("WRITE-LATENCY")
- )
- fsm.act("WRITE-ACK",
- bus.ack.eq(1),
- NextState("IDLE")
- )
- fsm.act("PRECHARGE-ALL",
- precharge_all.eq(1),
- dfi.phases[rdphase].ras_n.eq(0),
- dfi.phases[rdphase].cas_n.eq(1),
- dfi.phases[rdphase].we_n.eq(0),
- NextState("PRE-REFRESH")
- )
- fsm.act("PRECHARGE",
- # do no reset bank since we are going to re-open it
- dfi.phases[0].ras_n.eq(0),
- dfi.phases[0].cas_n.eq(1),
- dfi.phases[0].we_n.eq(0),
- NextState("TRP")
- )
- fsm.act("ACTIVATE",
- activate.eq(1),
- dfi.phases[0].ras_n.eq(0),
- dfi.phases[0].cas_n.eq(1),
- dfi.phases[0].we_n.eq(1),
- NextState("TRCD"),
- )
- fsm.act("REFRESH",
- refresh.eq(1),
- dfi.phases[rdphase].ras_n.eq(0),
- dfi.phases[rdphase].cas_n.eq(0),
- dfi.phases[rdphase].we_n.eq(1),
- NextState("POST-REFRESH")
- )
- fsm.delayed_enter("WRITE-LATENCY", "WRITE-ACK", phy_settings.write_latency-1)
- fsm.delayed_enter("TRP", "ACTIVATE", timing_settings.tRP-1)
- fsm.delayed_enter("TRCD", "IDLE", timing_settings.tRCD-1)
- fsm.delayed_enter("PRE-REFRESH", "REFRESH", timing_settings.tRP-1)
- fsm.delayed_enter("POST-REFRESH", "IDLE", timing_settings.tRFC-1)
-
- # DFI commands
- for phase in dfi.phases:
- if hasattr(phase, "reset_n"):
- self.comb += phase.reset_n.eq(1)
- if hasattr(phase, "odt"):
- self.comb += phase.odt.eq(1)
- self.comb += [
- phase.cke.eq(1),
- phase.cs_n.eq(0),
- phase.bank.eq(slicer.bank(bus.adr)),
- If(precharge_all,
- phase.address.eq(2**10)
- ).Elif(activate,
- phase.address.eq(slicer.row(bus.adr))
- ).Elif(write | read,
- phase.address.eq(slicer.col(bus.adr))
- )
- ]
-
- # DFI datapath
- self.comb += [
- bus.dat_r.eq(Cat(phase.rddata for phase in dfi.phases)),
- Cat(phase.wrdata for phase in dfi.phases).eq(bus.dat_w),
- Cat(phase.wrdata_mask for phase in dfi.phases).eq(~bus.sel),
- ]
+++ /dev/null
-from migen import *
-from migen.flow.actor import *
-from migen.genlib.fifo import SyncFIFO
-
-
-class Reader(Module):
- def __init__(self, lasmim, fifo_depth=None):
- self.address = Sink([("a", lasmim.aw)])
- self.data = Source([("d", lasmim.dw)])
- self.busy = Signal()
-
- ###
-
- if fifo_depth is None:
- fifo_depth = lasmim.req_queue_size + lasmim.read_latency + 2
-
- # request issuance
- request_enable = Signal()
- request_issued = Signal()
-
- self.comb += [
- lasmim.we.eq(0),
- lasmim.stb.eq(self.address.stb & request_enable),
- lasmim.adr.eq(self.address.a),
- self.address.ack.eq(lasmim.req_ack & request_enable),
- request_issued.eq(lasmim.stb & lasmim.req_ack)
- ]
-
- # FIFO reservation level counter
- # incremented when data is planned to be queued
- # decremented when data is dequeued
- data_dequeued = Signal()
- rsv_level = Signal(max=fifo_depth+1)
- self.sync += [
- If(request_issued,
- If(~data_dequeued, rsv_level.eq(rsv_level + 1))
- ).Elif(data_dequeued,
- rsv_level.eq(rsv_level - 1)
- )
- ]
- self.comb += [
- self.busy.eq(rsv_level != 0),
- request_enable.eq(rsv_level != fifo_depth)
- ]
-
- # FIFO
- fifo = SyncFIFO(lasmim.dw, fifo_depth)
- self.submodules += fifo
-
- self.comb += [
- fifo.din.eq(lasmim.dat_r),
- fifo.we.eq(lasmim.dat_r_ack),
-
- self.data.stb.eq(fifo.readable),
- fifo.re.eq(self.data.ack),
- self.data.d.eq(fifo.dout),
- data_dequeued.eq(self.data.stb & self.data.ack)
- ]
-
-
-class Writer(Module):
- def __init__(self, lasmim, fifo_depth=None):
- self.address_data = Sink([("a", lasmim.aw), ("d", lasmim.dw)])
- self.busy = Signal()
-
- ###
-
- if fifo_depth is None:
- fifo_depth = lasmim.req_queue_size + lasmim.write_latency + 2
-
- fifo = SyncFIFO(lasmim.dw, fifo_depth)
- self.submodules += fifo
-
- self.comb += [
- lasmim.we.eq(1),
- lasmim.stb.eq(fifo.writable & self.address_data.stb),
- lasmim.adr.eq(self.address_data.a),
- self.address_data.ack.eq(fifo.writable & lasmim.req_ack),
- fifo.we.eq(self.address_data.stb & lasmim.req_ack),
- fifo.din.eq(self.address_data.d)
- ]
-
- self.comb += [
- If(lasmim.dat_w_ack,
- fifo.re.eq(1),
- lasmim.dat_we.eq(2**(lasmim.dw//8)-1),
- lasmim.dat_w.eq(fifo.dout)
- ),
- self.busy.eq(fifo.readable)
- ]
+++ /dev/null
-from migen import *
-from migen.genlib.misc import optree
-from migen.bank.description import *
-from migen.actorlib.spi import *
-
-from misoc.mem.sdram.frontend import dma_lasmi
-
-
-@DecorateModule(InsertReset)
-@DecorateModule(InsertCE)
-class LFSR(Module):
- def __init__(self, n_out, n_state=31, taps=[27, 30]):
- self.o = Signal(n_out)
-
- ###
-
- state = Signal(n_state)
- curval = [state[i] for i in range(n_state)]
- curval += [0]*(n_out - n_state)
- for i in range(n_out):
- nv = ~optree("^", [curval[tap] for tap in taps])
- curval.insert(0, nv)
- curval.pop()
-
- self.sync += [
- state.eq(Cat(*curval[:n_state])),
- self.o.eq(Cat(*curval))
- ]
-
-memtest_magic = 0x361f
-
-
-class MemtestWriter(Module):
- def __init__(self, lasmim):
- self._magic = CSRStatus(16)
- self._reset = CSR()
- self._shoot = CSR()
- self.submodules._dma = DMAWriteController(dma_lasmi.Writer(lasmim),
- MODE_EXTERNAL)
-
- ###
-
- self.comb += self._magic.status.eq(memtest_magic)
-
- lfsr = LFSR(lasmim.dw)
- self.submodules += lfsr
- self.comb += lfsr.reset.eq(self._reset.re)
-
- en = Signal()
- en_counter = Signal(lasmim.aw)
- self.comb += en.eq(en_counter != 0)
- self.sync += [
- If(self._shoot.re,
- en_counter.eq(self._dma.length)
- ).Elif(lfsr.ce,
- en_counter.eq(en_counter - 1)
- )
- ]
-
- self.comb += [
- self._dma.trigger.eq(self._shoot.re),
- self._dma.data.stb.eq(en),
- lfsr.ce.eq(en & self._dma.data.ack),
- self._dma.data.d.eq(lfsr.o)
- ]
-
- def get_csrs(self):
- return [self._magic, self._reset, self._shoot] + self._dma.get_csrs()
-
-
-class MemtestReader(Module):
- def __init__(self, lasmim):
- self._magic = CSRStatus(16)
- self._reset = CSR()
- self._error_count = CSRStatus(lasmim.aw)
- self.submodules._dma = DMAReadController(dma_lasmi.Reader(lasmim),
- MODE_SINGLE_SHOT)
-
- ###
-
- self.comb += self._magic.status.eq(memtest_magic)
-
- lfsr = LFSR(lasmim.dw)
- self.submodules += lfsr
- self.comb += lfsr.reset.eq(self._reset.re)
-
- self.comb += [
- lfsr.ce.eq(self._dma.data.stb),
- self._dma.data.ack.eq(1)
- ]
- err_cnt = self._error_count.status
- self.sync += [
- If(self._reset.re,
- err_cnt.eq(0)
- ).Elif(self._dma.data.stb,
- If(self._dma.data.d != lfsr.o, err_cnt.eq(err_cnt + 1))
- )
- ]
-
- def get_csrs(self):
- return [self._magic, self._reset, self._error_count] + self._dma.get_csrs()
-
-
-class _LFSRTB(Module):
- def __init__(self, *args, **kwargs):
- self.submodules.dut = LFSR(*args, **kwargs)
- self.comb += self.dut.ce.eq(1)
-
- def do_simulation(self, selfp):
- print("{0:032x}".format(selfp.dut.o))
-
-if __name__ == "__main__":
- from migen.fhdl import verilog
- from migen.sim.generic import run_simulation
-
- lfsr = LFSR(3, 4, [3, 2])
- print(verilog.convert(lfsr, ios={lfsr.ce, lfsr.reset, lfsr.o}))
-
- run_simulation(_LFSRTB(128), ncycles=20)
+++ /dev/null
-from migen import *
-from migen.genlib.fsm import FSM, NextState
-
-class WB2LASMI(Module):
- def __init__(self, wishbone, lasmim):
-
- ###
-
- # Control FSM
- self.submodules.fsm = fsm = FSM(reset_state="IDLE")
- fsm.act("IDLE",
- If(wishbone.cyc & wishbone.stb,
- NextState("REQUEST")
- )
- )
- fsm.act("REQUEST",
- lasmim.stb.eq(1),
- lasmim.we.eq(wishbone.we),
- If(lasmim.req_ack,
- If(wishbone.we,
- NextState("WRITE_DATA")
- ).Else(
- NextState("READ_DATA")
- )
- )
- )
- fsm.act("WRITE_DATA",
- If(lasmim.dat_w_ack,
- lasmim.dat_we.eq(wishbone.sel),
- wishbone.ack.eq(1),
- NextState("IDLE")
- )
- )
- fsm.act("READ_DATA",
- If(lasmim.dat_r_ack,
- wishbone.ack.eq(1),
- NextState("IDLE")
- )
- )
-
- # Address / Datapath
- self.comb += [
- lasmim.adr.eq(wishbone.adr),
- If(lasmim.dat_w_ack,
- lasmim.dat_w.eq(wishbone.dat_w),
- ),
- wishbone.dat_r.eq(lasmim.dat_r)
- ]
+++ /dev/null
-# SDRAM memory modules library
-#
-# This library avoid duplications of memory modules definitions in targets and
-# ease SDRAM usage. (User can only select an already existing module or create
-# one for its board and contribute to this library)
-#
-# TODO:
-# Try to share the maximum information we can between modules:
-# - ex: MT46V32M16 and MT46H32M16 are almost identical (V=DDR, H=LPDDR)
-# - Modules can have different configuration:
-# MT8JTF12864 (1GB), MT8JTF25664 (2GB)
-# but share all others informations, try to create an unique module for all
-# configurations.
-# - Modules can have different speedgrades, add support for it (and also add
-# a check to verify clk_freq is in the supported range)
-
-from math import ceil
-
-from migen import *
-from misoc.mem import sdram
-
-
-class SDRAMModule:
- def __init__(self, clk_freq, memtype, geom_settings, timing_settings):
- self.clk_freq = clk_freq
- self.memtype = memtype
- self.geom_settings = sdram.GeomSettings(
- bankbits=log2_int(geom_settings["nbanks"]),
- rowbits=log2_int(geom_settings["nrows"]),
- colbits=log2_int(geom_settings["ncols"]),
- )
- self.timing_settings = sdram.TimingSettings(
- tRP=self.ns(timing_settings["tRP"]),
- tRCD=self.ns(timing_settings["tRCD"]),
- tWR=self.ns(timing_settings["tWR"]),
- tWTR=timing_settings["tWTR"],
- tREFI=self.ns(timing_settings["tREFI"], False),
- tRFC=self.ns(timing_settings["tRFC"])
- )
-
- def ns(self, t, margin=True):
- clk_period_ns = 1000000000/self.clk_freq
- if margin:
- t += clk_period_ns/2
- return ceil(t/clk_period_ns)
-
-
-# SDR
-class IS42S16160(SDRAMModule):
- geom_settings = {
- "nbanks": 4,
- "nrows": 8192,
- "ncols": 512
- }
- # Note: timings for -7 speedgrade (add support for others speedgrades)
- timing_settings = {
- "tRP": 20,
- "tRCD": 20,
- "tWR": 20,
- "tWTR": 2,
- "tREFI": 64*1000*1000/8192,
- "tRFC": 70
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "SDR", self.geom_settings,
- self.timing_settings)
-
-
-class MT48LC4M16(SDRAMModule):
- geom_settings = {
- "nbanks": 4,
- "nrows": 4096,
- "ncols": 256
- }
- timing_settings = {
- "tRP": 15,
- "tRCD": 15,
- "tWR": 14,
- "tWTR": 2,
- "tREFI": 64*1000*1000/4096,
- "tRFC": 66
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "SDR", self.geom_settings,
- self.timing_settings)
-
-
-class AS4C16M16(SDRAMModule):
- geom_settings = {
- "nbanks": 4,
- "nrows": 8192,
- "ncols": 512
- }
- # Note: timings for -6 speedgrade (add support for others speedgrades)
- timing_settings = {
- "tRP": 18,
- "tRCD": 18,
- "tWR": 12,
- "tWTR": 2,
- "tREFI": 64*1000*1000/8192,
- "tRFC": 60
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "SDR", self.geom_settings,
- self.timing_settings)
-
-
-# DDR
-class MT46V32M16(SDRAMModule):
- geom_settings = {
- "nbanks": 4,
- "nrows": 8192,
- "ncols": 1024
- }
- timing_settings = {
- "tRP": 15,
- "tRCD": 15,
- "tWR": 15,
- "tWTR": 2,
- "tREFI": 64*1000*1000/8192,
- "tRFC": 70
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "DDR", self.geom_settings,
- self.timing_settings)
-
-
-# LPDDR
-class MT46H32M16(SDRAMModule):
- geom_settings = {
- "nbanks": 4,
- "nrows": 8192,
- "ncols": 1024
- }
- timing_settings = {
- "tRP": 15,
- "tRCD": 15,
- "tWR": 15,
- "tWTR": 2,
- "tREFI": 64*1000*1000/8192,
- "tRFC": 72
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "LPDDR", self.geom_settings,
- self.timing_settings)
-
-
-# DDR2
-class MT47H128M8(SDRAMModule):
- geom_settings = {
- "nbanks": 8,
- "nrows": 16384,
- "ncols": 1024
- }
- timing_settings = {
- "tRP": 15,
- "tRCD": 15,
- "tWR": 15,
- "tWTR": 2,
- "tREFI": 7800,
- "tRFC": 127.5
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "DDR2", self.geom_settings,
- self.timing_settings)
-
-
-class P3R1GE4JGF(SDRAMModule):
- geom_settings = {
- "nbanks": 8,
- "nrows": 8192,
- "ncols": 1024
- }
- timing_settings = {
- "tRP": 12.5,
- "tRCD": 12.5,
- "tWR": 15,
- "tWTR": 3,
- "tREFI": 7800,
- "tRFC": 127.5,
- }
-
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "DDR2", self.geom_settings,
- self.timing_settings)
-
-
-# DDR3
-class MT8JTF12864(SDRAMModule):
- geom_settings = {
- "nbanks": 8,
- "nrows": 16384,
- "ncols": 1024
- }
- timing_settings = {
- "tRP": 15,
- "tRCD": 15,
- "tWR": 15,
- "tWTR": 2,
- "tREFI": 7800,
- "tRFC": 70
- }
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "DDR3", self.geom_settings,
- self.timing_settings)
-
-
-class MT41J128M16(SDRAMModule):
- geom_settings = {
- "nbanks": 8,
- "nrows": 16384,
- "ncols": 1024,
- }
- timing_settings = {
- "tRP": 15,
- "tRCD": 15,
- "tWR": 15,
- "tWTR": 3,
- "tREFI": 64*1000*1000/16384,
- "tRFC": 260,
- }
-
- def __init__(self, clk_freq):
- SDRAMModule.__init__(self, clk_freq, "DDR3", self.geom_settings,
- self.timing_settings)
+++ /dev/null
-from migen import *
-from migen.genlib.record import *
-
-
-def phase_cmd_description(addressbits, bankbits):
- return [
- ("address", addressbits, DIR_M_TO_S),
- ("bank", bankbits, DIR_M_TO_S),
- ("cas_n", 1, DIR_M_TO_S),
- ("cs_n", 1, DIR_M_TO_S),
- ("ras_n", 1, DIR_M_TO_S),
- ("we_n", 1, DIR_M_TO_S),
- ("cke", 1, DIR_M_TO_S),
- ("odt", 1, DIR_M_TO_S),
- ("reset_n", 1, DIR_M_TO_S)
- ]
-
-
-def phase_wrdata_description(databits):
- return [
- ("wrdata", databits, DIR_M_TO_S),
- ("wrdata_en", 1, DIR_M_TO_S),
- ("wrdata_mask", databits//8, DIR_M_TO_S)
- ]
-
-
-def phase_rddata_description(databits):
- return [
- ("rddata_en", 1, DIR_M_TO_S),
- ("rddata", databits, DIR_S_TO_M),
- ("rddata_valid", 1, DIR_S_TO_M)
- ]
-
-
-def phase_description(addressbits, bankbits, databits):
- r = phase_cmd_description(addressbits, bankbits)
- r += phase_wrdata_description(databits)
- r += phase_rddata_description(databits)
- return r
-
-
-class Interface(Record):
- def __init__(self, addressbits, bankbits, databits, nphases=1):
- layout = [("p"+str(i), phase_description(addressbits, bankbits, databits)) for i in range(nphases)]
- Record.__init__(self, layout)
- self.phases = [getattr(self, "p"+str(i)) for i in range(nphases)]
- for p in self.phases:
- p.cas_n.reset = 1
- p.cs_n.reset = 1
- p.ras_n.reset = 1
- p.we_n.reset = 1
-
- # Returns pairs (DFI-mandated signal name, Migen signal object)
- def get_standard_names(self, m2s=True, s2m=True):
- r = []
- add_suffix = len(self.phases) > 1
- for n, phase in enumerate(self.phases):
- for field, size, direction in phase.layout:
- if (m2s and direction == DIR_M_TO_S) or (s2m and direction == DIR_S_TO_M):
- if add_suffix:
- if direction == DIR_M_TO_S:
- suffix = "_p" + str(n)
- else:
- suffix = "_w" + str(n)
- else:
- suffix = ""
- r.append(("dfi_" + field + suffix, getattr(phase, field)))
- return r
-
-
-class Interconnect(Module):
- def __init__(self, master, slave):
- self.comb += master.connect(slave)
+++ /dev/null
-from migen import *
-from migen.bank.description import *
-
-from misoc.mem.sdram.phy import dfi
-
-
-class PhaseInjector(Module, AutoCSR):
- def __init__(self, phase):
- self._command = CSRStorage(6) # cs, we, cas, ras, wren, rden
- self._command_issue = CSR()
- self._address = CSRStorage(flen(phase.address))
- self._baddress = CSRStorage(flen(phase.bank))
- self._wrdata = CSRStorage(flen(phase.wrdata))
- self._rddata = CSRStatus(flen(phase.rddata))
-
- ###
-
- self.comb += [
- If(self._command_issue.re,
- phase.cs_n.eq(~self._command.storage[0]),
- phase.we_n.eq(~self._command.storage[1]),
- phase.cas_n.eq(~self._command.storage[2]),
- phase.ras_n.eq(~self._command.storage[3])
- ).Else(
- phase.cs_n.eq(1),
- phase.we_n.eq(1),
- phase.cas_n.eq(1),
- phase.ras_n.eq(1)
- ),
- phase.address.eq(self._address.storage),
- phase.bank.eq(self._baddress.storage),
- phase.wrdata_en.eq(self._command_issue.re & self._command.storage[4]),
- phase.rddata_en.eq(self._command_issue.re & self._command.storage[5]),
- phase.wrdata.eq(self._wrdata.storage),
- phase.wrdata_mask.eq(0)
- ]
- self.sync += If(phase.rddata_valid, self._rddata.status.eq(phase.rddata))
-
-
-class DFIInjector(Module, AutoCSR):
- def __init__(self, addressbits, bankbits, databits, nphases=1):
- inti = dfi.Interface(addressbits, bankbits, databits, nphases)
- self.slave = dfi.Interface(addressbits, bankbits, databits, nphases)
- self.master = dfi.Interface(addressbits, bankbits, databits, nphases)
-
- self._control = CSRStorage(4) # sel, cke, odt, reset_n
-
- for n, phase in enumerate(inti.phases):
- setattr(self.submodules, "pi" + str(n), PhaseInjector(phase))
-
- ###
-
- self.comb += If(self._control.storage[0],
- self.slave.connect(self.master)
- ).Else(
- inti.connect(self.master)
- )
- self.comb += [phase.cke.eq(self._control.storage[1]) for phase in inti.phases]
- self.comb += [phase.odt.eq(self._control.storage[2]) for phase in inti.phases if hasattr(phase, "odt")]
- self.comb += [phase.reset_n.eq(self._control.storage[3]) for phase in inti.phases if hasattr(phase, "reset_n")]
+++ /dev/null
-#
-# 1:1 frequency-ratio Generic SDR PHY
-#
-# The GENSDRPHY is validated on CycloneIV (Altera) but since it does
-# not use vendor-dependent code, it can also be used on other architectures.
-#
-# The PHY needs 2 Clock domains:
-# - sys_clk : The System Clock domain
-# - sys_clk_ps : The System Clock domain with its phase shifted
-# (-3ns on C4@100MHz)
-#
-# Assert dfi_wrdata_en and present the data
-# on dfi_wrdata_mask/dfi_wrdata in the same
-# cycle as the write command.
-#
-# Assert dfi_rddata_en in the same cycle as the read
-# command. The data will come back on dfi_rddata
-# 4 cycles later, along with the assertion of
-# dfi_rddata_valid.
-#
-# This PHY only supports CAS Latency 2.
-#
-
-from migen import *
-from migen.genlib.record import *
-from migen.fhdl.specials import *
-
-from misoc.mem.sdram.phy.dfi import *
-from misoc.mem import sdram
-
-
-class GENSDRPHY(Module):
- def __init__(self, pads, module):
- addressbits = flen(pads.a)
- bankbits = flen(pads.ba)
- databits = flen(pads.dq)
-
- self.settings = sdram.PhySettings(
- memtype=module.memtype,
- dfi_databits=databits,
- nphases=1,
- rdphase=0,
- wrphase=0,
- rdcmdphase=0,
- wrcmdphase=0,
- cl=2,
- read_latency=4,
- write_latency=0
- )
- self.module = module
-
- self.dfi = Interface(addressbits, bankbits, databits)
-
- ###
-
- #
- # Command/address
- #
- self.sync += [
- pads.a.eq(self.dfi.p0.address),
- pads.ba.eq(self.dfi.p0.bank),
- pads.cke.eq(self.dfi.p0.cke),
- pads.cas_n.eq(self.dfi.p0.cas_n),
- pads.ras_n.eq(self.dfi.p0.ras_n),
- pads.we_n.eq(self.dfi.p0.we_n)
- ]
- if hasattr(pads, "cs_n"):
- self.sync += pads.cs_n.eq(self.dfi.p0.cs_n)
-
- #
- # DQ/DQS/DM data
- #
- sd_dq_out = Signal(databits)
- drive_dq = Signal()
- self.sync += sd_dq_out.eq(self.dfi.p0.wrdata)
- self.specials += Tristate(pads.dq, sd_dq_out, drive_dq)
- self.sync += \
- If(self.dfi.p0.wrdata_en,
- pads.dm.eq(self.dfi.p0.wrdata_mask)
- ).Else(
- pads.dm.eq(0)
- )
- sd_dq_in_ps = Signal(databits)
- self.sync.sys_ps += sd_dq_in_ps.eq(pads.dq)
- self.sync += self.dfi.p0.rddata.eq(sd_dq_in_ps)
-
- #
- # DQ/DM control
- #
- d_dfi_wrdata_en = Signal()
- self.sync += d_dfi_wrdata_en.eq(self.dfi.p0.wrdata_en)
- self.comb += drive_dq.eq(d_dfi_wrdata_en)
-
- rddata_sr = Signal(4)
- self.comb += self.dfi.p0.rddata_valid.eq(rddata_sr[3])
- self.sync += rddata_sr.eq(Cat(self.dfi.p0.rddata_en, rddata_sr[:3]))
+++ /dev/null
-from migen import log2_int
-
-
-def get_sdram_phy_header(sdram_phy_settings):
- r = "#ifndef __GENERATED_SDRAM_PHY_H\n#define __GENERATED_SDRAM_PHY_H\n"
- r += "#include <hw/common.h>\n#include <generated/csr.h>\n#include <hw/flags.h>\n\n"
-
- nphases = sdram_phy_settings.nphases
- r += "#define DFII_NPHASES "+str(nphases)+"\n\n"
-
- r += "static void cdelay(int i);\n"
-
- # commands_px functions
- for n in range(nphases):
- r += """
-static void command_p{n}(int cmd)
-{{
- sdram_dfii_pi{n}_command_write(cmd);
- sdram_dfii_pi{n}_command_issue_write(1);
-}}""".format(n=str(n))
- r += "\n\n"
-
- # rd/wr access macros
- r += """
-#define sdram_dfii_pird_address_write(X) sdram_dfii_pi{rdphase}_address_write(X)
-#define sdram_dfii_piwr_address_write(X) sdram_dfii_pi{wrphase}_address_write(X)
-
-#define sdram_dfii_pird_baddress_write(X) sdram_dfii_pi{rdphase}_baddress_write(X)
-#define sdram_dfii_piwr_baddress_write(X) sdram_dfii_pi{wrphase}_baddress_write(X)
-
-#define command_prd(X) command_p{rdphase}(X)
-#define command_pwr(X) command_p{wrphase}(X)
-""".format(rdphase=str(sdram_phy_settings.rdphase), wrphase=str(sdram_phy_settings.wrphase))
- r += "\n"
-
- #
- # sdrrd/sdrwr functions utilities
- #
- r += "#define DFII_PIX_DATA_SIZE CSR_SDRAM_DFII_PI0_WRDATA_SIZE\n"
- sdram_dfii_pix_wrdata_addr = []
- for n in range(nphases):
- sdram_dfii_pix_wrdata_addr.append("CSR_SDRAM_DFII_PI{n}_WRDATA_ADDR".format(n=n))
- r += """
-const unsigned int sdram_dfii_pix_wrdata_addr[{n}] = {{
- {sdram_dfii_pix_wrdata_addr}
-}};
-""".format(n=nphases, sdram_dfii_pix_wrdata_addr=",\n\t".join(sdram_dfii_pix_wrdata_addr))
-
- sdram_dfii_pix_rddata_addr = []
- for n in range(nphases):
- sdram_dfii_pix_rddata_addr.append("CSR_SDRAM_DFII_PI{n}_RDDATA_ADDR".format(n=n))
- r += """
-const unsigned int sdram_dfii_pix_rddata_addr[{n}] = {{
- {sdram_dfii_pix_rddata_addr}
-}};
-""".format(n=nphases, sdram_dfii_pix_rddata_addr=",\n\t".join(sdram_dfii_pix_rddata_addr))
- r += "\n"
-
- # init sequence
- cmds = {
- "PRECHARGE_ALL": "DFII_COMMAND_RAS|DFII_COMMAND_WE|DFII_COMMAND_CS",
- "MODE_REGISTER": "DFII_COMMAND_RAS|DFII_COMMAND_CAS|DFII_COMMAND_WE|DFII_COMMAND_CS",
- "AUTO_REFRESH": "DFII_COMMAND_RAS|DFII_COMMAND_CAS|DFII_COMMAND_CS",
- "UNRESET": "DFII_CONTROL_ODT|DFII_CONTROL_RESET_N",
- "CKE": "DFII_CONTROL_CKE|DFII_CONTROL_ODT|DFII_CONTROL_RESET_N"
- }
-
- cl = sdram_phy_settings.cl
-
- if sdram_phy_settings.memtype == "SDR":
- bl = sdram_phy_settings.nphases
- mr = log2_int(bl) + (cl << 4)
- reset_dll = 1 << 8
-
- init_sequence = [
- ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200)
- ]
-
- elif sdram_phy_settings.memtype == "DDR":
- bl = 2*sdram_phy_settings.nphases
- mr = log2_int(bl) + (cl << 4)
- emr = 0
- reset_dll = 1 << 8
-
- init_sequence = [
- ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Load Extended Mode Register", emr, 1, cmds["MODE_REGISTER"], 0),
- ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200)
- ]
-
- elif sdram_phy_settings.memtype == "LPDDR":
- bl = 2*sdram_phy_settings.nphases
- mr = log2_int(bl) + (cl << 4)
- emr = 0
- reset_dll = 1 << 8
-
- init_sequence = [
- ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Load Extended Mode Register", emr, 2, cmds["MODE_REGISTER"], 0),
- ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200)
- ]
-
- elif sdram_phy_settings.memtype == "DDR2":
- bl = 2*sdram_phy_settings.nphases
- wr = 2
- mr = log2_int(bl) + (cl << 4) + (wr << 9)
- emr = 0
- emr2 = 0
- emr3 = 0
- reset_dll = 1 << 8
- ocd = 7 << 7
-
- init_sequence = [
- ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Load Extended Mode Register 3", emr3, 3, cmds["MODE_REGISTER"], 0),
- ("Load Extended Mode Register 2", emr2, 2, cmds["MODE_REGISTER"], 0),
- ("Load Extended Mode Register", emr, 1, cmds["MODE_REGISTER"], 0),
- ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
- ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
- ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200),
- ("Load Extended Mode Register / OCD Default", emr+ocd, 1, cmds["MODE_REGISTER"], 0),
- ("Load Extended Mode Register / OCD Exit", emr, 1, cmds["MODE_REGISTER"], 0),
- ]
- elif sdram_phy_settings.memtype == "DDR3":
- bl = 2*sdram_phy_settings.nphases
-
- def format_mr0(bl, cl, wr, dll_reset):
- bl_to_mr0 = {
- 4: 0b10,
- 8: 0b00
- }
- cl_to_mr0 = {
- 5: 0b0010,
- 6: 0b0100,
- 7: 0b0110,
- 8: 0b1000,
- 9: 0b1010,
- 10: 0b1100,
- 11: 0b1110,
- 12: 0b0001,
- 13: 0b0011,
- 14: 0b0101
- }
- wr_to_mr0 = {
- 16: 0b000,
- 5: 0b001,
- 6: 0b010,
- 7: 0b011,
- 8: 0b100,
- 10: 0b101,
- 12: 0b110,
- 14: 0b111
- }
- mr0 = bl_to_mr0[bl]
- mr0 |= (cl_to_mr0[cl] & 1) << 2
- mr0 |= ((cl_to_mr0[cl] >> 1) & 0b111) << 4
- mr0 |= dll_reset << 8
- mr0 |= wr_to_mr0[wr] << 9
- return mr0
-
- def format_mr1(output_drive_strength, rtt_nom):
- mr1 = ((output_drive_strength >> 0) & 1) << 1
- mr1 |= ((output_drive_strength >> 1) & 1) << 5
- mr1 |= ((rtt_nom >> 0) & 1) << 2
- mr1 |= ((rtt_nom >> 1) & 1) << 6
- mr1 |= ((rtt_nom >> 2) & 1) << 9
- return mr1
-
- def format_mr2(cwl, rtt_wr):
- mr2 = (cwl-5) << 3
- mr2 |= rtt_wr << 9
- return mr2
-
- mr0 = format_mr0(bl, cl, 8, 1) # wr=8 FIXME: this should be ceiling(tWR/tCK)
- mr1 = format_mr1(1, 1) # Output Drive Strength RZQ/7 (34 ohm) / Rtt RZQ/4 (60 ohm)
- mr2 = format_mr2(sdram_phy_settings.cwl, 2) # Rtt(WR) RZQ/4
- mr3 = 0
-
- init_sequence = [
- ("Release reset", 0x0000, 0, cmds["UNRESET"], 50000),
- ("Bring CKE high", 0x0000, 0, cmds["CKE"], 10000),
- ("Load Mode Register 2", mr2, 2, cmds["MODE_REGISTER"], 0),
- ("Load Mode Register 3", mr3, 3, cmds["MODE_REGISTER"], 0),
- ("Load Mode Register 1", mr1, 1, cmds["MODE_REGISTER"], 0),
- ("Load Mode Register 0, CL={0:d}, BL={1:d}".format(cl, bl), mr0, 0, cmds["MODE_REGISTER"], 200),
- ("ZQ Calibration", 0x0400, 0, "DFII_COMMAND_WE|DFII_COMMAND_CS", 200),
- ]
-
- # the value of MR1 needs to be modified during write leveling
- r += "#define DDR3_MR1 {}\n\n".format(mr1)
- else:
- raise NotImplementedError("Unsupported memory type: "+sdram_phy_settings.memtype)
-
- r += "static void init_sequence(void)\n{\n"
- for comment, a, ba, cmd, delay in init_sequence:
- r += "\t/* {0} */\n".format(comment)
- r += "\tsdram_dfii_pi0_address_write({0:#x});\n".format(a)
- r += "\tsdram_dfii_pi0_baddress_write({0:d});\n".format(ba)
- if cmd[:12] == "DFII_CONTROL":
- r += "\tsdram_dfii_control_write({0});\n".format(cmd)
- else:
- r += "\tcommand_p0({0});\n".format(cmd)
- if delay:
- r += "\tcdelay({0:d});\n".format(delay)
- r += "\n"
- r += "}\n"
-
- r += "#endif\n"
-
- return r
+++ /dev/null
-# tCK=5ns CL=7 CWL=6
-
-from migen import *
-from migen.bank.description import *
-
-from misoc.mem.sdram.phy.dfi import *
-from misoc.mem import sdram
-
-
-class K7DDRPHY(Module, AutoCSR):
- def __init__(self, pads, module):
- addressbits = flen(pads.a)
- bankbits = flen(pads.ba)
- databits = flen(pads.dq)
- nphases = 4
-
- self._wlevel_en = CSRStorage()
- self._wlevel_strobe = CSR()
- self._dly_sel = CSRStorage(databits//8)
- self._rdly_dq_rst = CSR()
- self._rdly_dq_inc = CSR()
- self._rdly_dq_bitslip = CSR()
- self._wdly_dq_rst = CSR()
- self._wdly_dq_inc = CSR()
- self._wdly_dqs_rst = CSR()
- self._wdly_dqs_inc = CSR()
-
- self.settings = sdram.PhySettings(
- memtype=module.memtype,
- dfi_databits=2*databits,
- nphases=nphases,
- rdphase=0,
- wrphase=2,
- rdcmdphase=1,
- wrcmdphase=0,
- cl=7,
- cwl=6,
- read_latency=6,
- write_latency=2
- )
- self.module = module
-
- self.dfi = Interface(addressbits, bankbits, 2*databits, nphases)
-
- ###
-
- # Clock
- sd_clk_se = Signal()
- self.specials += [
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OQ=sd_clk_se,
- i_OCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=0, i_D2=1, i_D3=0, i_D4=1,
- i_D5=0, i_D6=1, i_D7=0, i_D8=1
- ),
- Instance("OBUFDS",
- i_I=sd_clk_se,
- o_O=pads.clk_p,
- o_OB=pads.clk_n
- )
- ]
-
- # Addresses and commands
- for i in range(addressbits):
- self.specials += \
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OQ=pads.a[i],
- i_OCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=self.dfi.phases[0].address[i], i_D2=self.dfi.phases[0].address[i],
- i_D3=self.dfi.phases[1].address[i], i_D4=self.dfi.phases[1].address[i],
- i_D5=self.dfi.phases[2].address[i], i_D6=self.dfi.phases[2].address[i],
- i_D7=self.dfi.phases[3].address[i], i_D8=self.dfi.phases[3].address[i]
- )
- for i in range(bankbits):
- self.specials += \
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OQ=pads.ba[i],
- i_OCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=self.dfi.phases[0].bank[i], i_D2=self.dfi.phases[0].bank[i],
- i_D3=self.dfi.phases[1].bank[i], i_D4=self.dfi.phases[1].bank[i],
- i_D5=self.dfi.phases[2].bank[i], i_D6=self.dfi.phases[2].bank[i],
- i_D7=self.dfi.phases[3].bank[i], i_D8=self.dfi.phases[3].bank[i]
- )
- for name in "ras_n", "cas_n", "we_n", "cs_n", "cke", "odt", "reset_n":
- self.specials += \
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OQ=getattr(pads, name),
- i_OCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=getattr(self.dfi.phases[0], name), i_D2=getattr(self.dfi.phases[0], name),
- i_D3=getattr(self.dfi.phases[1], name), i_D4=getattr(self.dfi.phases[1], name),
- i_D5=getattr(self.dfi.phases[2], name), i_D6=getattr(self.dfi.phases[2], name),
- i_D7=getattr(self.dfi.phases[3], name), i_D8=getattr(self.dfi.phases[3], name)
- )
-
- # DQS and DM
- oe_dqs = Signal()
- dqs_serdes_pattern = Signal(8)
- self.comb += \
- If(self._wlevel_en.storage,
- If(self._wlevel_strobe.re,
- dqs_serdes_pattern.eq(0b00000001)
- ).Else(
- dqs_serdes_pattern.eq(0b00000000)
- )
- ).Else(
- dqs_serdes_pattern.eq(0b01010101)
- )
- for i in range(databits//8):
- dm_o_nodelay = Signal()
- self.specials += \
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OQ=dm_o_nodelay,
- i_OCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=self.dfi.phases[0].wrdata_mask[i], i_D2=self.dfi.phases[0].wrdata_mask[databits//8+i],
- i_D3=self.dfi.phases[1].wrdata_mask[i], i_D4=self.dfi.phases[1].wrdata_mask[databits//8+i],
- i_D5=self.dfi.phases[2].wrdata_mask[i], i_D6=self.dfi.phases[2].wrdata_mask[databits//8+i],
- i_D7=self.dfi.phases[3].wrdata_mask[i], i_D8=self.dfi.phases[3].wrdata_mask[databits//8+i]
- )
- self.specials += \
- Instance("ODELAYE2",
- p_DELAY_SRC="ODATAIN", p_SIGNAL_PATTERN="DATA",
- p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
- p_PIPE_SEL="FALSE", p_ODELAY_TYPE="VARIABLE", p_ODELAY_VALUE=0,
-
- i_C=ClockSignal(),
- i_LD=self._dly_sel.storage[i] & self._wdly_dq_rst.re,
- i_CE=self._dly_sel.storage[i] & self._wdly_dq_inc.re,
- i_LDPIPEEN=0, i_INC=1,
-
- o_ODATAIN=dm_o_nodelay, o_DATAOUT=pads.dm[i]
- )
-
- dqs_nodelay = Signal()
- dqs_delayed = Signal()
- dqs_t = Signal()
- self.specials += [
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OFB=dqs_nodelay, o_TQ=dqs_t,
- i_OCE=1, i_TCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=dqs_serdes_pattern[0], i_D2=dqs_serdes_pattern[1],
- i_D3=dqs_serdes_pattern[2], i_D4=dqs_serdes_pattern[3],
- i_D5=dqs_serdes_pattern[4], i_D6=dqs_serdes_pattern[5],
- i_D7=dqs_serdes_pattern[6], i_D8=dqs_serdes_pattern[7],
- i_T1=~oe_dqs
- ),
- Instance("ODELAYE2",
- p_DELAY_SRC="ODATAIN", p_SIGNAL_PATTERN="DATA",
- p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
- p_PIPE_SEL="FALSE", p_ODELAY_TYPE="VARIABLE", p_ODELAY_VALUE=6,
-
- i_C=ClockSignal(),
- i_LD=self._dly_sel.storage[i] & self._wdly_dqs_rst.re,
- i_CE=self._dly_sel.storage[i] & self._wdly_dqs_inc.re,
- i_LDPIPEEN=0, i_INC=1,
-
- o_ODATAIN=dqs_nodelay, o_DATAOUT=dqs_delayed
- ),
- Instance("OBUFTDS",
- i_I=dqs_delayed, i_T=dqs_t,
- o_O=pads.dqs_p[i], o_OB=pads.dqs_n[i]
- )
- ]
-
- # DQ
- oe_dq = Signal()
- for i in range(databits):
- dq_o_nodelay = Signal()
- dq_o_delayed = Signal()
- dq_i_nodelay = Signal()
- dq_i_delayed = Signal()
- dq_t = Signal()
- self.specials += [
- Instance("OSERDESE2",
- p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
- p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
- p_SERDES_MODE="MASTER",
-
- o_OQ=dq_o_nodelay, o_TQ=dq_t,
- i_OCE=1, i_TCE=1,
- i_RST=ResetSignal(),
- i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_D1=self.dfi.phases[0].wrdata[i], i_D2=self.dfi.phases[0].wrdata[databits+i],
- i_D3=self.dfi.phases[1].wrdata[i], i_D4=self.dfi.phases[1].wrdata[databits+i],
- i_D5=self.dfi.phases[2].wrdata[i], i_D6=self.dfi.phases[2].wrdata[databits+i],
- i_D7=self.dfi.phases[3].wrdata[i], i_D8=self.dfi.phases[3].wrdata[databits+i],
- i_T1=~oe_dq
- ),
- Instance("ISERDESE2",
- p_DATA_WIDTH=8, p_DATA_RATE="DDR",
- p_SERDES_MODE="MASTER", p_INTERFACE_TYPE="NETWORKING",
- p_NUM_CE=1, p_IOBDELAY="IFD",
-
- i_DDLY=dq_i_delayed,
- i_CE1=1,
- i_RST=ResetSignal() | (self._dly_sel.storage[i//8] & self._wdly_dq_rst.re),
- i_CLK=ClockSignal("sys4x"), i_CLKB=~ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
- i_BITSLIP=self._dly_sel.storage[i//8] & self._rdly_dq_bitslip.re,
- o_Q8=self.dfi.phases[0].rddata[i], o_Q7=self.dfi.phases[0].rddata[databits+i],
- o_Q6=self.dfi.phases[1].rddata[i], o_Q5=self.dfi.phases[1].rddata[databits+i],
- o_Q4=self.dfi.phases[2].rddata[i], o_Q3=self.dfi.phases[2].rddata[databits+i],
- o_Q2=self.dfi.phases[3].rddata[i], o_Q1=self.dfi.phases[3].rddata[databits+i]
- ),
- Instance("ODELAYE2",
- p_DELAY_SRC="ODATAIN", p_SIGNAL_PATTERN="DATA",
- p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
- p_PIPE_SEL="FALSE", p_ODELAY_TYPE="VARIABLE", p_ODELAY_VALUE=0,
-
- i_C=ClockSignal(),
- i_LD=self._dly_sel.storage[i//8] & self._wdly_dq_rst.re,
- i_CE=self._dly_sel.storage[i//8] & self._wdly_dq_inc.re,
- i_LDPIPEEN=0, i_INC=1,
-
- o_ODATAIN=dq_o_nodelay, o_DATAOUT=dq_o_delayed
- ),
- Instance("IDELAYE2",
- p_DELAY_SRC="IDATAIN", p_SIGNAL_PATTERN="DATA",
- p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
- p_PIPE_SEL="FALSE", p_IDELAY_TYPE="VARIABLE", p_IDELAY_VALUE=6,
-
- i_C=ClockSignal(),
- i_LD=self._dly_sel.storage[i//8] & self._rdly_dq_rst.re,
- i_CE=self._dly_sel.storage[i//8] & self._rdly_dq_inc.re,
- i_LDPIPEEN=0, i_INC=1,
-
- i_IDATAIN=dq_i_nodelay, o_DATAOUT=dq_i_delayed
- ),
- Instance("IOBUF",
- i_I=dq_o_delayed, o_O=dq_i_nodelay, i_T=dq_t,
- io_IO=pads.dq[i]
- )
- ]
-
- # Flow control
- #
- # total read latency = 6:
- # 2 cycles through OSERDESE2
- # 2 cycles CAS
- # 2 cycles through ISERDESE2
- rddata_en = self.dfi.phases[self.settings.rdphase].rddata_en
- for i in range(5):
- n_rddata_en = Signal()
- self.sync += n_rddata_en.eq(rddata_en)
- rddata_en = n_rddata_en
- self.sync += [phase.rddata_valid.eq(rddata_en | self._wlevel_en.storage)
- for phase in self.dfi.phases]
-
- oe = Signal()
- last_wrdata_en = Signal(4)
- wrphase = self.dfi.phases[self.settings.wrphase]
- self.sync += last_wrdata_en.eq(Cat(wrphase.wrdata_en, last_wrdata_en[:3]))
- self.comb += oe.eq(last_wrdata_en[1] | last_wrdata_en[2] | last_wrdata_en[3])
- self.sync += \
- If(self._wlevel_en.storage,
- oe_dqs.eq(1), oe_dq.eq(0)
- ).Else(
- oe_dqs.eq(oe), oe_dq.eq(oe)
- )
+++ /dev/null
-# 1:2 and 1:4 frequency-ratio DDR / LPDDR / DDR2 / DDR3 PHYs for Spartan-6
-#
-# Assert dfi_wrdata_en and present the data
-# on dfi_wrdata_mask/dfi_wrdata in the same
-# cycle as the write command.
-#
-# Assert dfi_rddata_en in the same cycle as the read
-# command. The data will come back on dfi_rddata
-# 5 cycles later, along with the assertion
-# of dfi_rddata_valid.
-#
-# This PHY only supports CAS latency 3 for DDR, LPDDR, DDR2
-# and CAS latency 5/CAS write latency 6 for DDR3.
-#
-# Read commands must be sent on phase 0.
-# Write commands must be sent on phase 1.
-#
-
-from migen import *
-from migen.genlib.record import *
-
-from misoc.mem.sdram.phy.dfi import *
-from misoc.mem import sdram
-
-
-class S6HalfRateDDRPHY(Module):
- def __init__(self, pads, module, rd_bitslip, wr_bitslip, dqs_ddr_alignment):
- if module.memtype not in ["DDR", "LPDDR", "DDR2", "DDR3"]:
- raise NotImplementedError("S6HalfRateDDRPHY only supports DDR, LPDDR, DDR2 and DDR3")
- addressbits = flen(pads.a)
- bankbits = flen(pads.ba)
- databits = flen(pads.dq)
- nphases = 2
-
- if module.memtype == "DDR3":
- self.settings = sdram.PhySettings(
- memtype="DDR3",
- dfi_databits=2*databits,
- nphases=nphases,
- rdphase=0,
- wrphase=1,
- rdcmdphase=1,
- wrcmdphase=0,
- cl=5,
- cwl=6,
- read_latency=6,
- write_latency=2
- )
- else:
- self.settings = sdram.PhySettings(
- memtype=module.memtype,
- dfi_databits=2*databits,
- nphases=nphases,
- rdphase=0,
- wrphase=1,
- rdcmdphase=1,
- wrcmdphase=0,
- cl=3,
- read_latency=5,
- write_latency=0
- )
-
- self.module = module
-
- self.dfi = Interface(addressbits, bankbits, 2*databits, nphases)
- self.clk4x_wr_strb = Signal()
- self.clk4x_rd_strb = Signal()
-
- ###
-
- # sys_clk : system clk, used for dfi interface
- # sdram_half_clk : half rate sdram clk
- # sdram_full_wr_clk : full rate sdram write clk
- # sdram_full_rd_clk : full rate sdram read clk
- sd_sys = getattr(self.sync, "sys")
- sd_sdram_half = getattr(self.sync, "sdram_half")
-
- sys_clk = ClockSignal("sys")
- sdram_half_clk = ClockSignal("sdram_half")
- sdram_full_wr_clk = ClockSignal("sdram_full_wr")
- sdram_full_rd_clk = ClockSignal("sdram_full_rd")
-
- #
- # Command/address
- #
-
- # select active phase
- # sys_clk ----____----____
- # phase_sel(nphases=2) 0 1 0 1 Half Rate
- phase_sel = Signal(log2_int(nphases))
- phase_half = Signal.like(phase_sel)
- phase_sys = Signal.like(phase_half)
-
- sd_sys += phase_sys.eq(phase_half)
-
- sd_sdram_half += [
- If(phase_half == phase_sys,
- phase_sel.eq(0),
- ).Else(
- phase_sel.eq(phase_sel+1)
- ),
- phase_half.eq(phase_half+1),
- ]
-
- # register dfi cmds on half_rate clk
- r_dfi = Array(Record(phase_cmd_description(addressbits, bankbits)) for i in range(nphases))
- for n, phase in enumerate(self.dfi.phases):
- sd_sdram_half += [
- r_dfi[n].reset_n.eq(phase.reset_n),
- r_dfi[n].odt.eq(phase.odt),
- r_dfi[n].address.eq(phase.address),
- r_dfi[n].bank.eq(phase.bank),
- r_dfi[n].cs_n.eq(phase.cs_n),
- r_dfi[n].cke.eq(phase.cke),
- r_dfi[n].cas_n.eq(phase.cas_n),
- r_dfi[n].ras_n.eq(phase.ras_n),
- r_dfi[n].we_n.eq(phase.we_n)
- ]
-
- # output cmds
- sd_sdram_half += [
- pads.a.eq(r_dfi[phase_sel].address),
- pads.ba.eq(r_dfi[phase_sel].bank),
- pads.cke.eq(r_dfi[phase_sel].cke),
- pads.ras_n.eq(r_dfi[phase_sel].ras_n),
- pads.cas_n.eq(r_dfi[phase_sel].cas_n),
- pads.we_n.eq(r_dfi[phase_sel].we_n)
- ]
- # optional pads
- for name in "reset_n", "cs_n", "odt":
- if hasattr(pads, name):
- sd_sdram_half += getattr(pads, name).eq(getattr(r_dfi[phase_sel], name))
-
- #
- # Bitslip
- #
- bitslip_cnt = Signal(4)
- bitslip_inc = Signal()
-
- sd_sys += [
- If(bitslip_cnt == rd_bitslip,
- bitslip_inc.eq(0)
- ).Else(
- bitslip_cnt.eq(bitslip_cnt+1),
- bitslip_inc.eq(1)
- )
- ]
-
- #
- # DQ/DQS/DM data
- #
- sdram_half_clk_n = Signal()
- self.comb += sdram_half_clk_n.eq(~sdram_half_clk)
-
- postamble = Signal()
- drive_dqs = Signal()
- dqs_t_d0 = Signal()
- dqs_t_d1 = Signal()
-
- dqs_o = Signal(databits//8)
- dqs_t = Signal(databits//8)
-
- self.comb += [
- dqs_t_d0.eq(~(drive_dqs | postamble)),
- dqs_t_d1.eq(~drive_dqs),
- ]
-
- for i in range(databits//8):
- # DQS output
- self.specials += Instance("ODDR2",
- p_DDR_ALIGNMENT=dqs_ddr_alignment,
- p_INIT=0,
- p_SRTYPE="ASYNC",
-
- i_C0=sdram_half_clk,
- i_C1=sdram_half_clk_n,
-
- i_CE=1,
- i_D0=0,
- i_D1=1,
- i_R=0,
- i_S=0,
-
- o_Q=dqs_o[i]
- )
-
- # DQS tristate cmd
- self.specials += Instance("ODDR2",
- p_DDR_ALIGNMENT=dqs_ddr_alignment,
- p_INIT=0,
- p_SRTYPE="ASYNC",
-
- i_C0=sdram_half_clk,
- i_C1=sdram_half_clk_n,
-
- i_CE=1,
- i_D0=dqs_t_d0,
- i_D1=dqs_t_d1,
- i_R=0,
- i_S=0,
-
- o_Q=dqs_t[i]
- )
-
- # DQS tristate buffer
- if hasattr(pads, "dqs_n"):
- self.specials += Instance("OBUFTDS",
- i_I=dqs_o[i],
- i_T=dqs_t[i],
-
- o_O=pads.dqs[i],
- o_OB=pads.dqs_n[i],
- )
- else:
- self.specials += Instance("OBUFT",
- i_I=dqs_o[i],
- i_T=dqs_t[i],
-
- o_O=pads.dqs[i]
- )
-
- sd_sdram_half += postamble.eq(drive_dqs)
-
- d_dfi = [Record(phase_wrdata_description(nphases*databits)+phase_rddata_description(nphases*databits))
- for i in range(2*nphases)]
-
- for n, phase in enumerate(self.dfi.phases):
- self.comb += [
- d_dfi[n].wrdata.eq(phase.wrdata),
- d_dfi[n].wrdata_mask.eq(phase.wrdata_mask),
- d_dfi[n].wrdata_en.eq(phase.wrdata_en),
- d_dfi[n].rddata_en.eq(phase.rddata_en),
- ]
- sd_sys += [
- d_dfi[nphases+n].wrdata.eq(phase.wrdata),
- d_dfi[nphases+n].wrdata_mask.eq(phase.wrdata_mask)
- ]
-
-
- drive_dq = Signal()
- drive_dq_n = [Signal() for i in range(2)]
- self.comb += drive_dq_n[0].eq(~drive_dq)
- sd_sys += drive_dq_n[1].eq(drive_dq_n[0])
-
- dq_t = Signal(databits)
- dq_o = Signal(databits)
- dq_i = Signal(databits)
-
- dq_wrdata = []
- for i in range(2):
- for j in reversed(range(nphases)):
- dq_wrdata.append(d_dfi[i*nphases+j].wrdata[:databits])
- dq_wrdata.append(d_dfi[i*nphases+j].wrdata[databits:])
-
- for i in range(databits):
- # Data serializer
- self.specials += Instance("OSERDES2",
- p_DATA_WIDTH=4,
- p_DATA_RATE_OQ="SDR",
- p_DATA_RATE_OT="SDR",
- p_SERDES_MODE="NONE",
- p_OUTPUT_MODE="SINGLE_ENDED",
-
- o_OQ=dq_o[i],
- i_OCE=1,
- i_CLK0=sdram_full_wr_clk,
- i_CLK1=0,
- i_IOCE=self.clk4x_wr_strb,
- i_RST=0,
- i_CLKDIV=sys_clk,
-
- i_D1=dq_wrdata[wr_bitslip+3][i],
- i_D2=dq_wrdata[wr_bitslip+2][i],
- i_D3=dq_wrdata[wr_bitslip+1][i],
- i_D4=dq_wrdata[wr_bitslip+0][i],
-
- o_TQ=dq_t[i],
- i_T1=drive_dq_n[(wr_bitslip+3)//4],
- i_T2=drive_dq_n[(wr_bitslip+2)//4],
- i_T3=drive_dq_n[(wr_bitslip+1)//4],
- i_T4=drive_dq_n[(wr_bitslip+0)//4],
- i_TRAIN=0,
- i_TCE=1,
- i_SHIFTIN1=0,
- i_SHIFTIN2=0,
- i_SHIFTIN3=0,
- i_SHIFTIN4=0,
- )
-
- # Data deserializer
- self.specials += Instance("ISERDES2",
- p_DATA_WIDTH=4,
- p_DATA_RATE="SDR",
- p_BITSLIP_ENABLE="TRUE",
- p_SERDES_MODE="NONE",
- p_INTERFACE_TYPE="RETIMED",
-
- i_D=dq_i[i],
- i_CE0=1,
- i_CLK0=sdram_full_rd_clk,
- i_CLK1=0,
- i_IOCE=self.clk4x_rd_strb,
- i_RST=ResetSignal(),
- i_CLKDIV=sys_clk,
- i_BITSLIP=bitslip_inc,
-
- o_Q1=d_dfi[0*nphases+0].rddata[i+databits],
- o_Q2=d_dfi[0*nphases+0].rddata[i],
- o_Q3=d_dfi[0*nphases+1].rddata[i+databits],
- o_Q4=d_dfi[0*nphases+1].rddata[i],
- )
-
- # Data buffer
- self.specials += Instance("IOBUF",
- i_I=dq_o[i],
- o_O=dq_i[i],
- i_T=dq_t[i],
- io_IO=pads.dq[i]
- )
-
- dq_wrdata_mask = []
- for i in range(2):
- for j in reversed(range(nphases)):
- dq_wrdata_mask.append(d_dfi[i*nphases+j].wrdata_mask[:databits//8])
- dq_wrdata_mask.append(d_dfi[i*nphases+j].wrdata_mask[databits//8:])
-
- for i in range(databits//8):
- # Mask serializer
- self.specials += Instance("OSERDES2",
- p_DATA_WIDTH=4,
- p_DATA_RATE_OQ="SDR",
- p_DATA_RATE_OT="SDR",
- p_SERDES_MODE="NONE",
- p_OUTPUT_MODE="SINGLE_ENDED",
-
- o_OQ=pads.dm[i],
- i_OCE=1,
- i_CLK0=sdram_full_wr_clk,
- i_CLK1=0,
- i_IOCE=self.clk4x_wr_strb,
- i_RST=0,
- i_CLKDIV=sys_clk,
-
- i_D1=dq_wrdata_mask[wr_bitslip+3][i],
- i_D2=dq_wrdata_mask[wr_bitslip+2][i],
- i_D3=dq_wrdata_mask[wr_bitslip+1][i],
- i_D4=dq_wrdata_mask[wr_bitslip+0][i],
-
- i_TRAIN=0,
- i_TCE=0,
- i_SHIFTIN1=0,
- i_SHIFTIN2=0,
- i_SHIFTIN3=0,
- i_SHIFTIN4=0,
- )
-
-
- #
- # DQ/DQS/DM control
- #
-
- # write
- wrdata_en = Signal()
- self.comb += wrdata_en.eq(optree("|", [d_dfi[p].wrdata_en for p in range(nphases)]))
-
- if module.memtype == "DDR3":
- r_drive_dq = Signal(self.settings.cwl-1)
- sd_sdram_half += r_drive_dq.eq(Cat(wrdata_en, r_drive_dq))
- self.comb += drive_dq.eq(r_drive_dq[self.settings.cwl-2])
- else:
- self.comb += drive_dq.eq(wrdata_en)
-
- wrdata_en_d = Signal()
- sd_sys += wrdata_en_d.eq(wrdata_en)
-
- r_dfi_wrdata_en = Signal(max(self.settings.cwl, self.settings.cl))
- sd_sdram_half += r_dfi_wrdata_en.eq(Cat(wrdata_en_d, r_dfi_wrdata_en))
-
- if module.memtype == "DDR3":
- self.comb += drive_dqs.eq(r_dfi_wrdata_en[self.settings.cwl-1])
- else:
- self.comb += drive_dqs.eq(r_dfi_wrdata_en[1])
-
- # read
- rddata_en = Signal()
- self.comb += rddata_en.eq(optree("|", [d_dfi[p].rddata_en for p in range(nphases)]))
-
- rddata_sr = Signal(self.settings.read_latency)
- sd_sys += rddata_sr.eq(Cat(rddata_sr[1:self.settings.read_latency], rddata_en))
-
- for n, phase in enumerate(self.dfi.phases):
- self.comb += [
- phase.rddata.eq(d_dfi[n].rddata),
- phase.rddata_valid.eq(rddata_sr[0]),
- ]
-
-
-class S6QuarterRateDDRPHY(Module):
- def __init__(self, pads, module, rd_bitslip, wr_bitslip, dqs_ddr_alignment):
- if module.memtype not in ["DDR3"]:
- raise NotImplementedError("S6QuarterRateDDRPHY only supports DDR3")
- half_rate_phy = S6HalfRateDDRPHY(pads, module, rd_bitslip, wr_bitslip, dqs_ddr_alignment)
- self.submodules += RenameClockDomains(half_rate_phy, {"sys" : "sys2x"})
-
- addressbits = flen(pads.a)
- bankbits = flen(pads.ba)
- databits = flen(pads.dq)
- nphases = 4
-
- self.settings = sdram.PhySettings(
- memtype="DDR3",
- dfi_databits=2*databits,
- nphases=nphases,
- rdphase=0,
- wrphase=1,
- rdcmdphase=1,
- wrcmdphase=0,
- cl=5,
- cwl=6,
- read_latency=6//2+1,
- write_latency=2//2
- )
-
- self.module = module
-
- self.dfi = Interface(addressbits, bankbits, 2*databits, nphases)
- self.clk8x_wr_strb = half_rate_phy.clk4x_wr_strb
- self.clk8x_rd_strb = half_rate_phy.clk4x_rd_strb
-
- # sys_clk : system clk, used for dfi interface
- # sys2x_clk : 2x system clk
- sd_sys = getattr(self.sync, "sys")
- sd_sys2x = getattr(self.sync, "sys2x")
-
- # select active sys2x phase
- # sys_clk ----____----____
- # phase_sel 0 1 0 1
- phase_sel = Signal()
- phase_sys2x = Signal.like(phase_sel)
- phase_sys = Signal.like(phase_sys2x)
-
- sd_sys += phase_sys.eq(phase_sys2x)
-
- sd_sys2x += [
- If(phase_sys2x == phase_sys,
- phase_sel.eq(0),
- ).Else(
- phase_sel.eq(~phase_sel)
- ),
- phase_sys2x.eq(~phase_sel)
- ]
-
- # DFI adaptation
-
- # Commands and writes
- dfi_leave_out = set(["rddata", "rddata_valid", "wrdata_en"])
- self.comb += [
- If(~phase_sel,
- Record.connect(self.dfi.phases[0], half_rate_phy.dfi.phases[0], leave_out=dfi_leave_out),
- Record.connect(self.dfi.phases[1], half_rate_phy.dfi.phases[1], leave_out=dfi_leave_out),
- ).Else(
- Record.connect(self.dfi.phases[2], half_rate_phy.dfi.phases[0], leave_out=dfi_leave_out),
- Record.connect(self.dfi.phases[3], half_rate_phy.dfi.phases[1], leave_out=dfi_leave_out),
- ),
- ]
- wr_data_en = self.dfi.phases[self.settings.wrphase].wrdata_en & ~phase_sel
- wr_data_en_d = Signal()
- sd_sys2x += wr_data_en_d.eq(wr_data_en)
- self.comb += half_rate_phy.dfi.phases[half_rate_phy.settings.wrphase].wrdata_en.eq(wr_data_en | wr_data_en_d)
-
- # Reads
- rddata = Array(Signal(2*databits) for i in range(2))
- rddata_valid = Signal(2)
-
- for i in range(2):
- sd_sys2x += [
- rddata_valid[i].eq(half_rate_phy.dfi.phases[i].rddata_valid),
- rddata[i].eq(half_rate_phy.dfi.phases[i].rddata)
- ]
-
- sd_sys += [
- self.dfi.phases[0].rddata.eq(rddata[0]),
- self.dfi.phases[0].rddata_valid.eq(rddata_valid[0]),
- self.dfi.phases[1].rddata.eq(rddata[1]),
- self.dfi.phases[1].rddata_valid.eq(rddata_valid[1]),
- self.dfi.phases[2].rddata.eq(half_rate_phy.dfi.phases[0].rddata),
- self.dfi.phases[2].rddata_valid.eq(half_rate_phy.dfi.phases[0].rddata_valid),
- self.dfi.phases[3].rddata.eq(half_rate_phy.dfi.phases[1].rddata),
- self.dfi.phases[3].rddata_valid.eq(half_rate_phy.dfi.phases[1].rddata_valid)
- ]
+++ /dev/null
-# This file is Copyright (c) 2015 Florent Kermarrec <florent@enjoy-digital.fr>
-# License: BSD
-
-# SDRAM simulation PHY at DFI level
-# tested with SDR/DDR/DDR2/LPDDR/DDR3
-# TODO:
-# - add $display support to Migen and manage timing violations?
-
-from migen import *
-from migen.fhdl.specials import *
-from misoc.mem.sdram.phy.dfi import *
-from misoc.mem import sdram
-
-
-class Bank(Module):
- def __init__(self, data_width, nrows, ncols, burst_length):
- self.activate = Signal()
- self.activate_row = Signal(max=nrows)
- self.precharge = Signal()
-
- self.write = Signal()
- self.write_col = Signal(max=ncols)
- self.write_data = Signal(data_width)
- self.write_mask = Signal(data_width//8)
-
- self.read = Signal()
- self.read_col = Signal(max=ncols)
- self.read_data = Signal(data_width)
-
- ###
- active = Signal()
- row = Signal(max=nrows)
-
- self.sync += \
- If(self.precharge,
- active.eq(0),
- ).Elif(self.activate,
- active.eq(1),
- row.eq(self.activate_row)
- )
-
- self.specials.mem = mem = Memory(data_width, nrows*ncols//burst_length)
- self.specials.write_port = write_port = mem.get_port(write_capable=True,
- we_granularity=8)
- self.specials.read_port = read_port = mem.get_port(async_read=True)
- self.comb += [
- If(active,
- write_port.adr.eq(row*ncols | self.write_col),
- write_port.dat_w.eq(self.write_data),
- write_port.we.eq(Replicate(self.write, data_width//8) & ~self.write_mask),
- If(self.read,
- read_port.adr.eq(row*ncols | self.read_col),
- self.read_data.eq(read_port.dat_r)
- )
- )
- ]
-
-
-class DFIPhase(Module):
- def __init__(self, dfi, n):
- phase = getattr(dfi, "p"+str(n))
-
- self.bank = phase.bank
- self.address = phase.address
-
- self.wrdata = phase.wrdata
- self.wrdata_mask = phase.wrdata_mask
-
- self.rddata = phase.rddata
- self.rddata_valid = phase.rddata_valid
-
- self.activate = Signal()
- self.precharge = Signal()
- self.write = Signal()
- self.read = Signal()
-
- ###
- self.comb += [
- If(~phase.cs_n & ~phase.ras_n & phase.cas_n,
- self.activate.eq(phase.we_n),
- self.precharge.eq(~phase.we_n)
- ),
- If(~phase.cs_n & phase.ras_n & ~phase.cas_n,
- self.write.eq(~phase.we_n),
- self.read.eq(phase.we_n)
- )
- ]
-
-
-class SDRAMPHYSim(Module):
- def __init__(self, module, settings):
- if settings.memtype in ["SDR"]:
- burst_length = settings.nphases*1 # command multiplication*SDR
- elif settings.memtype in ["DDR", "LPDDR", "DDR2", "DDR3"]:
- burst_length = settings.nphases*2 # command multiplication*DDR
-
- addressbits = module.geom_settings.addressbits
- bankbits = module.geom_settings.bankbits
- rowbits = module.geom_settings.rowbits
- colbits = module.geom_settings.colbits
-
- self.settings = settings
- self.module = module
-
- self.dfi = Interface(addressbits, bankbits, self.settings.dfi_databits, self.settings.nphases)
-
- ###
- nbanks = 2**bankbits
- nrows = 2**rowbits
- ncols = 2**colbits
- data_width = self.settings.dfi_databits*self.settings.nphases
-
- # DFI phases
- phases = [DFIPhase(self.dfi, n) for n in range(self.settings.nphases)]
- self.submodules += phases
-
- # banks
- banks = [Bank(data_width, nrows, ncols, burst_length) for i in range(nbanks)]
- self.submodules += banks
-
- # connect DFI phases to banks (cmds, write datapath)
- for nb, bank in enumerate(banks):
- # bank activate
- activates = Signal(len(phases))
- cases = {}
- for np, phase in enumerate(phases):
- self.comb += activates[np].eq(phase.activate)
- cases[2**np] = [
- bank.activate.eq(phase.bank == nb),
- bank.activate_row.eq(phase.address)
- ]
- self.comb += Case(activates, cases)
-
- # bank precharge
- precharges = Signal(len(phases))
- cases = {}
- for np, phase in enumerate(phases):
- self.comb += precharges[np].eq(phase.precharge)
- cases[2**np] = [
- bank.precharge.eq((phase.bank == nb) | phase.address[10])
- ]
- self.comb += Case(precharges, cases)
-
- # bank writes
- writes = Signal(len(phases))
- cases = {}
- for np, phase in enumerate(phases):
- self.comb += writes[np].eq(phase.write)
- cases[2**np] = [
- bank.write.eq(phase.bank == nb),
- bank.write_col.eq(phase.address)
- ]
- self.comb += Case(writes, cases)
- self.comb += [
- bank.write_data.eq(Cat(*[phase.wrdata for phase in phases])),
- bank.write_mask.eq(Cat(*[phase.wrdata_mask for phase in phases]))
- ]
-
- # bank reads
- reads = Signal(len(phases))
- read_data = Signal(data_width)
- cases = {}
- for np, phase in enumerate(phases):
- self.comb += reads[np].eq(phase.read)
- cases[2**np] = [
- bank.read.eq(phase.bank == nb),
- bank.read_col.eq(phase.address)
- ]
- self.comb += Case(reads, cases)
-
- # connect banks to DFI phases (cmds, read datapath)
- banks_read = Signal()
- banks_read_data = Signal(data_width)
- self.comb += [
- banks_read.eq(optree("|", [bank.read for bank in banks])),
- banks_read_data.eq(optree("|", [bank.read_data for bank in banks]))
- ]
- # simulate read latency
- for i in range(self.settings.read_latency):
- new_banks_read = Signal()
- new_banks_read_data = Signal(data_width)
- self.sync += [
- new_banks_read.eq(banks_read),
- new_banks_read_data.eq(banks_read_data)
- ]
- banks_read = new_banks_read
- banks_read_data = new_banks_read_data
-
- self.comb += [
- Cat(*[phase.rddata_valid for phase in phases]).eq(banks_read),
- Cat(*[phase.rddata for phase in phases]).eq(banks_read_data)
- ]
+++ /dev/null
-from migen import *
-from migen.bus.transactions import *
-from migen.sim.generic import run_simulation
-
-from misoc.mem.sdram.core import lasmibus
-
-
-def my_generator(n):
- bank = n % 4
- for x in range(4):
- t = TWrite(4*bank+x, 0x1000*bank + 0x100*x)
- yield t
- print("{0}: Wrote in {1} cycle(s)".format(n, t.latency))
-
- for x in range(4):
- t = TRead(4*bank+x)
- yield t
- print("{0}: Read {1:x} in {2} cycle(s)".format(n, t.data, t.latency))
- assert(t.data == 0x1000*bank + 0x100*x)
-
-
-class MyModel(lasmibus.TargetModel):
- def read(self, bank, address):
- r = 0x1000*bank + 0x100*address
- #print("read from bank {0} address {1} -> {2:x}".format(bank, address, r))
- return r
-
- def write(self, bank, address, data, we):
- print("write to bank {0} address {1:x} data {2:x}".format(bank, address, data))
- assert(data == 0x1000*bank + 0x100*address)
-
-
-class TB(Module):
- def __init__(self):
- self.submodules.controller = lasmibus.Target(MyModel(), aw=4, dw=32, nbanks=4, req_queue_size=4,
- read_latency=4, write_latency=1)
- self.submodules.xbar = lasmibus.Crossbar([self.controller.bus], 2)
- self.initiators = [lasmibus.Initiator(my_generator(n), self.xbar.get_master()) for n in range(4)]
- self.submodules += self.initiators
-
-if __name__ == "__main__":
- run_simulation(TB())
+++ /dev/null
-from migen import *
-from migen.sim.generic import run_simulation
-
-from misoc.mem.sdram.code import lasmibus
-from misoc.mem.sdram.core.lasmicon.bankmachine import *
-
-from common import sdram_phy, sdram_geom, sdram_timing, CommandLogger
-
-
-def my_generator():
- for x in range(10):
- yield True, x
- for x in range(10):
- yield False, 128*x
-
-
-class TB(Module):
- def __init__(self):
- self.req = Interface(32, 32, 1,
- sdram_timing.req_queue_size, sdram_phy.read_latency, sdram_phy.write_latency)
- self.submodules.dut = BankMachine(sdram_geom, sdram_timing, 2, 0, self.req)
- self.submodules.logger = CommandLogger(self.dut.cmd, True)
- self.generator = my_generator()
- self.dat_ack_cnt = 0
-
- def do_simulation(self, selfp):
- if selfp.req.dat_ack:
- self.dat_ack_cnt += 1
- if selfp.req.req_ack:
- try:
- we, adr = next(self.generator)
- except StopIteration:
- selfp.req.stb = 0
- if not selfp.req.lock:
- print("data ack count: {0}".format(self.dat_ack_cnt))
- raise StopSimulation
- return
- selfp.req.adr = adr
- selfp.req.we = we
- selfp.req.stb = 1
-
-if __name__ == "__main__":
- run_simulation(TB(), vcd_name="my.vcd")
+++ /dev/null
-from fractions import Fraction
-from math import ceil
-
-from migen import *
-
-from misoc import sdram
-
-MHz = 1000000
-clk_freq = (83 + Fraction(1, 3))*MHz
-
-clk_period_ns = 1000000000/clk_freq
-
-
-def ns(t, margin=True):
- if margin:
- t += clk_period_ns/2
- return ceil(t/clk_period_ns)
-
-sdram_phy = sdram.PhySettings(
- memtype="DDR",
- dfi_databits=64,
- nphases=2,
- rdphase=0,
- wrphase=1,
- rdcmdphase=1,
- wrcmdphase=0,
- cl=3,
- read_latency=5,
- write_latency=0
-)
-
-sdram_geom = sdram.GeomSettings(
- bankbits=2,
- rowbits=13,
- colbits=10
-)
-sdram_timing = sdram.TimingSettings(
- tRP=ns(15),
- tRCD=ns(15),
- tWR=ns(15),
- tWTR=2,
- tREFI=ns(7800, False),
- tRFC=ns(70),
-
- req_queue_size=8,
- read_time=32,
- write_time=16
-)
-
-
-def decode_sdram(ras_n, cas_n, we_n, bank, address):
- elts = []
- if not ras_n and cas_n and we_n:
- elts.append("ACTIVATE")
- elts.append("BANK " + str(bank))
- elts.append("ROW " + str(address))
- elif ras_n and not cas_n and we_n:
- elts.append("READ\t")
- elts.append("BANK " + str(bank))
- elts.append("COL " + str(address))
- elif ras_n and not cas_n and not we_n:
- elts.append("WRITE\t")
- elts.append("BANK " + str(bank))
- elts.append("COL " + str(address))
- elif ras_n and cas_n and not we_n:
- elts.append("BST")
- elif not ras_n and not cas_n and we_n:
- elts.append("AUTO REFRESH")
- elif not ras_n and cas_n and not we_n:
- elts.append("PRECHARGE")
- if address & 2**10:
- elts.append("ALL")
- else:
- elts.append("BANK " + str(bank))
- elif not ras_n and not cas_n and not we_n:
- elts.append("LMR")
- return elts
-
-
-class CommandLogger(Module):
- def __init__(self, cmd, rw=False):
- self.cmd = cmd
- if rw:
- self.comb += self.cmd.ack.eq(1)
-
- def do_simulation(self, selfp):
- elts = ["@" + str(selfp.simulator.cycle_counter)]
- cmdp = selfp.cmd
- elts += decode_sdram(cmdp.ras_n, cmdp.cas_n, cmdp.we_n, cmdp.ba, cmdp.a)
- if len(elts) > 1:
- print("\t".join(elts))
- do_simulation.passive = True
-
-
-class DFILogger(Module):
- def __init__(self, dfi):
- self.dfi = dfi
-
- def do_simulation(self, selfp):
- dfip = selfp.dfi
- for i, p in enumerate(dfip.phases):
- elts = ["@" + str(selfp.simulator.cycle_counter) + ":" + str(i)]
- elts += decode_sdram(p.ras_n, p.cas_n, p.we_n, p.bank, p.address)
- if len(elts) > 1:
- print("\t".join(elts))
- do_simulation.passive = True
+++ /dev/null
-from migen import *
-from migen.sim.generic import run_simulation
-
-from misoc.mem.sdram.core import lasmibus
-from misoc.mem.sdram.core.lasmicon import *
-from misoc.mem.sdram.frontend import dma_lasmi
-
-from common import sdram_phy, sdram_geom, sdram_timing, DFILogger
-
-
-class TB(Module):
- def __init__(self):
- self.submodules.ctler = LASMIcon(sdram_phy, sdram_geom, sdram_timing)
- self.submodules.xbar = lasmibus.Crossbar([self.ctler.lasmic], self.ctler.nrowbits)
- self.submodules.logger = DFILogger(self.ctler.dfi)
- self.submodules.writer = dma_lasmi.Writer(self.xbar.get_master())
-
- self.comb += self.writer.address_data.stb.eq(1)
- pl = self.writer.address_data.payload
- pl.a.reset = 255
- pl.d.reset = pl.a.reset*2
- self.sync += If(self.writer.address_data.ack,
- pl.a.eq(pl.a + 1),
- pl.d.eq(pl.d + 2)
- )
- self.open_row = None
-
- def do_simulation(self, selfp):
- dfip = selfp.ctler.dfi
- for p in dfip.phases:
- if p.ras_n and not p.cas_n and not p.we_n: # write
- d = dfip.phases[0].wrdata | (dfip.phases[1].wrdata << 64)
- print(d)
- if d != p.address//2 + p.bank*512 + self.open_row*2048:
- print("**** ERROR ****")
- elif not p.ras_n and p.cas_n and p.we_n: # activate
- self.open_row = p.address
-
-if __name__ == "__main__":
- run_simulation(TB(), ncycles=3500, vcd_name="my.vcd")
+++ /dev/null
-from migen import *
-from migen.sim.generic import run_simulation
-
-from misoc.mem.sdram.core import lasmibus
-from misoc.mem.sdram.core.lasmicon import *
-
-from common import sdram_phy, sdram_geom, sdram_timing, DFILogger
-
-
-def my_generator_r(n):
- for x in range(10):
- t = TRead(128*n + 48*n*x)
- yield t
- print("{0:3}: reads done".format(n))
-
-
-def my_generator_w(n):
- for x in range(10):
- t = TWrite(128*n + 48*n*x, x)
- yield t
- print("{0:3}: writes done".format(n))
-
-
-def my_generator(n):
- if n % 2:
- return my_generator_w(n // 2)
- else:
- return my_generator_r(n // 2)
-
-
-class TB(Module):
- def __init__(self):
- self.submodules.dut = LASMIcon(sdram_phy, sdram_geom, sdram_timing)
- self.submodules.xbar = lasmibus.Crossbar([self.dut.lasmic], self.dut.nrowbits)
- self.submodules.logger = DFILogger(self.dut.dfi)
-
- masters = [self.xbar.get_master() for i in range(6)]
- self.initiators = [Initiator(my_generator(n), master)
- for n, master in enumerate(masters)]
- self.submodules += self.initiators
-
-if __name__ == "__main__":
- run_simulation(TB(), vcd_name="my.vcd")
+++ /dev/null
-from migen import *
-from migen.bus import wishbone
-from migen.bus.transactions import *
-from migen.sim.generic import run_simulation
-
-from misoc.mem.sdram.core import lasmibus
-from misoc.mem.sdram.core.lasmicon import *
-from misoc.mem.sdram.frontend import wishbone2lasmi
-
-from common import sdram_phy, sdram_geom, sdram_timing, DFILogger
-
-l2_size = 8192 # in bytes
-
-
-def my_generator():
- for x in range(20):
- t = TWrite(x, x)
- yield t
- print(str(t) + " delay=" + str(t.latency))
- for x in range(20):
- t = TRead(x)
- yield t
- print(str(t) + " delay=" + str(t.latency))
- for x in range(20):
- t = TRead(x+l2_size//4)
- yield t
- print(str(t) + " delay=" + str(t.latency))
-
-
-class TB(Module):
- def __init__(self):
- self.submodules.ctler = LASMIcon(sdram_phy, sdram_geom, sdram_timing)
- self.submodules.xbar = lasmibus.Crossbar([self.ctler.lasmic], self.ctler.nrowbits)
- self.submodules.logger = DFILogger(self.ctler.dfi)
- self.submodules.bridge = wishbone2lasmi.WB2LASMI(l2_size//4, self.xbar.get_master())
- self.submodules.initiator = wishbone.Initiator(my_generator())
- self.submodules.conn = wishbone.InterconnectPointToPoint(self.initiator.bus, self.bridge.wishbone)
-
-if __name__ == "__main__":
- run_simulation(TB(), vcd_name="my.vcd")
+++ /dev/null
-from migen import *
-from migen.bus.transactions import TRead, TWrite
-from migen.bus import wishbone
-from migen.sim.generic import Simulator
-from migen.sim import icarus
-from mibuild.platforms import papilio_pro as board
-from misoc import sdram
-from misoc.mem.sdram.core.minicon import Minicon
-from misoc.mem.sdram.phy import gensdrphy
-from itertools import chain
-from os.path import isfile
-import sys
-
-clk_freq = 80000000
-
-from math import ceil
-
-
-def ns(t, margin=True):
- clk_period_ns = 1000000000/clk_freq
- if margin:
- t += clk_period_ns/2
- return ceil(t/clk_period_ns)
-
-
-class MiniconTB(Module):
- def __init__(self, sdrphy, dfi, sdram_geom, sdram_timing, pads, sdram_clk):
-
- self.clk_freq = 80000000
- phy_settings = sdrphy.settings
- rdphase = phy_settings.rdphase
- self.submodules.slave = Minicon(phy_settings, sdram_geom, sdram_timing)
-
- self.submodules.tap = wishbone.Tap(self.slave.bus)
- self.submodules.dc = dc = wishbone.DownConverter(32, phy_settings.nphases*flen(dfi.phases[rdphase].rddata))
- self.submodules.master = wishbone.Initiator(self.genxfers(), bus=dc.wishbone_i)
- self.submodules.intercon = wishbone.InterconnectPointToPoint(dc.wishbone_o, self.slave.bus)
-
- self.submodules.sdrphy = self.sdrphy = sdrphy
- self.dfi = dfi
- self.pads = pads
-
- self.specials += Instance("mt48lc4m16a2",
- io_Dq=pads.dq,
- i_Addr=pads.a,
- i_Ba=pads.ba,
- i_Clk=ClockSignal(),
- i_Cke=pads.cke,
- i_Cs_n=pads.cs_n,
- i_Ras_n=pads.ras_n,
- i_Cas_n=pads.cas_n,
- i_We_n=pads.we_n,
- i_Dqm=pads.dm
- )
-
- def genxfers(self):
- cycle = 0
- for a in chain(range(4), range(256, 260), range(1024, 1028)):
- t = TRead(a)
- yield t
- print("read {} in {} cycles".format(t.data, t.latency))
- for a in chain(range(4), range(256, 260), range(1024, 1028), range(4096, 4100)):
- t = TWrite(a, 0xaa55aa55+cycle)
- cycle += 1
- yield t
- print("read {} in {} cycles".format(t.data, t.latency))
- for a in chain(range(4), range(256, 260), range(1024, 1028), range(4096, 4100)):
- t = TRead(a)
- yield t
- print("read {} in {} cycles".format(t.data, t.latency))
-
- def gen_simulation(self, selfp):
- dfi = selfp.dfi
- phy = self.sdrphy
- rdphase = phy.settings.rdphase
- cycle = 0
-
- while True:
- yield
-
-
-class MyTopLevel:
- def __init__(self, vcd_name=None, vcd_level=1,
- top_name="top", dut_type="dut", dut_name="dut",
- cd_name="sys", clk_period=10):
- self.vcd_name = vcd_name
- self.vcd_level = vcd_level
- self.top_name = top_name
- self.dut_type = dut_type
- self.dut_name = dut_name
-
- self._cd_name = cd_name
- self._clk_period = clk_period
-
- cd = ClockDomain(self._cd_name)
- cd_ps = ClockDomain("sys_ps")
- self.clock_domains = [cd, cd_ps]
- self.ios = {cd.clk, cd.rst, cd_ps.clk}
-
- def get(self, sockaddr):
- template1 = """`timescale 1ns / 1ps
-
-module {top_name}();
-
-reg {clk_name};
-reg {rst_name};
-reg sys_ps_clk;
-
-initial begin
- {rst_name} <= 1'b1;
- @(posedge {clk_name});
- {rst_name} <= 1'b0;
-end
-
-always begin
- {clk_name} <= 1'b0;
- #{hclk_period};
- {clk_name} <= 1'b1;
- #{hclk_period};
-end
-
-always @(posedge {clk_name} or negedge {clk_name})
- sys_ps_clk <= #({hclk_period}*2-3) {clk_name};
-
-{dut_type} {dut_name}(
- .{rst_name}({rst_name}),
- .{clk_name}({clk_name}),
- .sys_ps_clk(sys_ps_clk)
-);
-
-initial $migensim_connect("{sockaddr}");
-always @(posedge {clk_name}) $migensim_tick;
-"""
- template2 = """
-initial begin
- $dumpfile("{vcd_name}");
- $dumpvars({vcd_level}, {dut_name});
-end
-"""
- r = template1.format(top_name=self.top_name,
- dut_type=self.dut_type,
- dut_name=self.dut_name,
- clk_name=self._cd_name + "_clk",
- rst_name=self._cd_name + "_rst",
- hclk_period=str(self._clk_period/2),
- sockaddr=sockaddr)
- if self.vcd_name is not None:
- r += template2.format(vcd_name=self.vcd_name,
- vcd_level=str(self.vcd_level),
- dut_name=self.dut_name)
- r += "\nendmodule"
- return r
-
-
-if __name__ == "__main__":
-
- plat = board.Platform()
-
- sdram_geom = sdram.GeomSettings(
- bankbits=2,
- rowbits=12,
- colbits=8
- )
-
- sdram_timing = sdram.TimingSettings(
- tRP=ns(15),
- tRCD=ns(15),
- tWR=ns(14),
- tWTR=2,
- tREFI=ns(64*1000*1000/4096, False),
- tRFC=ns(66),
- req_queue_size=8,
- read_time=32,
- write_time=16
- )
-
- sdram_pads = plat.request("sdram")
- sdram_clk = plat.request("sdram_clock")
-
- sdrphy = gensdrphy.GENSDRPHY(sdram_pads)
-
-# This sets CL to 2 during LMR done on 1st cycle
- sdram_pads.a.reset = 1<<5
-
- s = MiniconTB(sdrphy, sdrphy.dfi, sdram_geom, sdram_timing, pads=sdram_pads, sdram_clk=sdram_clk)
-
- extra_files = ["sdram_model/mt48lc4m16a2.v"]
-
- if not isfile(extra_files[0]):
- print("ERROR: You need to download Micron Verilog simulation model for MT48LC4M16A2 and put it in sdram_model/mt48lc4m16a2.v")
- print("File can be downloaded from this URL: http://www.micron.com/-/media/documents/products/sim%20model/dram/dram/4054mt48lc4m16a2.zip")
- sys.exit(1)
-
- with Simulator(s, MyTopLevel("top.vcd", clk_period=int(1/0.08)), icarus.Runner(extra_files=extra_files, keep_files=True)) as sim:
- sim.run(5000)
+++ /dev/null
-from random import Random
-
-from migen import *
-from migen.sim.generic import run_simulation
-
-from misoc.mem.sdram.core.lasmicon.refresher import *
-
-from common import CommandLogger
-
-
-class Granter(Module):
- def __init__(self, req, ack):
- self.req = req
- self.ack = ack
- self.state = 0
- self.prng = Random(92837)
-
- def do_simulation(self, selfp):
- elts = ["@" + str(selfp.simulator.cycle_counter)]
-
- if self.state == 0:
- if selfp.req:
- elts.append("Refresher requested access")
- self.state = 1
- elif self.state == 1:
- if self.prng.randrange(0, 5) == 0:
- elts.append("Granted access to refresher")
- selfp.ack = 1
- self.state = 2
- elif self.state == 2:
- if not selfp.req:
- elts.append("Refresher released access")
- selfp.ack = 0
- self.state = 0
-
- if len(elts) > 1:
- print("\t".join(elts))
-
-
-class TB(Module):
- def __init__(self):
- self.submodules.dut = Refresher(13, 2, tRP=3, tREFI=100, tRFC=5)
- self.submodules.logger = CommandLogger(self.dut.cmd)
- self.submodules.granter = Granter(self.dut.req, self.dut.ack)
-
-if __name__ == "__main__":
- run_simulation(TB(), ncycles=400)
--- /dev/null
+# This file is Copyright (c) 2015 Florent Kermarrec <florent@enjoy-digital.fr>
+# License: BSD
+
+# SDRAM simulation PHY at DFI level
+# tested with SDR/DDR/DDR2/LPDDR/DDR3
+# TODO:
+# - add $display support to Migen and manage timing violations?
+
+from migen import *
+from migen.fhdl.specials import *
+from misoc.mem.sdram.phy.dfi import *
+from misoc.mem import sdram
+
+
+class Bank(Module):
+ def __init__(self, data_width, nrows, ncols, burst_length):
+ self.activate = Signal()
+ self.activate_row = Signal(max=nrows)
+ self.precharge = Signal()
+
+ self.write = Signal()
+ self.write_col = Signal(max=ncols)
+ self.write_data = Signal(data_width)
+ self.write_mask = Signal(data_width//8)
+
+ self.read = Signal()
+ self.read_col = Signal(max=ncols)
+ self.read_data = Signal(data_width)
+
+ ###
+ active = Signal()
+ row = Signal(max=nrows)
+
+ self.sync += \
+ If(self.precharge,
+ active.eq(0),
+ ).Elif(self.activate,
+ active.eq(1),
+ row.eq(self.activate_row)
+ )
+
+ self.specials.mem = mem = Memory(data_width, nrows*ncols//burst_length)
+ self.specials.write_port = write_port = mem.get_port(write_capable=True,
+ we_granularity=8)
+ self.specials.read_port = read_port = mem.get_port(async_read=True)
+ self.comb += [
+ If(active,
+ write_port.adr.eq(row*ncols | self.write_col),
+ write_port.dat_w.eq(self.write_data),
+ write_port.we.eq(Replicate(self.write, data_width//8) & ~self.write_mask),
+ If(self.read,
+ read_port.adr.eq(row*ncols | self.read_col),
+ self.read_data.eq(read_port.dat_r)
+ )
+ )
+ ]
+
+
+class DFIPhase(Module):
+ def __init__(self, dfi, n):
+ phase = getattr(dfi, "p"+str(n))
+
+ self.bank = phase.bank
+ self.address = phase.address
+
+ self.wrdata = phase.wrdata
+ self.wrdata_mask = phase.wrdata_mask
+
+ self.rddata = phase.rddata
+ self.rddata_valid = phase.rddata_valid
+
+ self.activate = Signal()
+ self.precharge = Signal()
+ self.write = Signal()
+ self.read = Signal()
+
+ ###
+ self.comb += [
+ If(~phase.cs_n & ~phase.ras_n & phase.cas_n,
+ self.activate.eq(phase.we_n),
+ self.precharge.eq(~phase.we_n)
+ ),
+ If(~phase.cs_n & phase.ras_n & ~phase.cas_n,
+ self.write.eq(~phase.we_n),
+ self.read.eq(phase.we_n)
+ )
+ ]
+
+
+class SDRAMPHYSim(Module):
+ def __init__(self, module, settings):
+ if settings.memtype in ["SDR"]:
+ burst_length = settings.nphases*1 # command multiplication*SDR
+ elif settings.memtype in ["DDR", "LPDDR", "DDR2", "DDR3"]:
+ burst_length = settings.nphases*2 # command multiplication*DDR
+
+ addressbits = module.geom_settings.addressbits
+ bankbits = module.geom_settings.bankbits
+ rowbits = module.geom_settings.rowbits
+ colbits = module.geom_settings.colbits
+
+ self.settings = settings
+ self.module = module
+
+ self.dfi = Interface(addressbits, bankbits, self.settings.dfi_databits, self.settings.nphases)
+
+ ###
+ nbanks = 2**bankbits
+ nrows = 2**rowbits
+ ncols = 2**colbits
+ data_width = self.settings.dfi_databits*self.settings.nphases
+
+ # DFI phases
+ phases = [DFIPhase(self.dfi, n) for n in range(self.settings.nphases)]
+ self.submodules += phases
+
+ # banks
+ banks = [Bank(data_width, nrows, ncols, burst_length) for i in range(nbanks)]
+ self.submodules += banks
+
+ # connect DFI phases to banks (cmds, write datapath)
+ for nb, bank in enumerate(banks):
+ # bank activate
+ activates = Signal(len(phases))
+ cases = {}
+ for np, phase in enumerate(phases):
+ self.comb += activates[np].eq(phase.activate)
+ cases[2**np] = [
+ bank.activate.eq(phase.bank == nb),
+ bank.activate_row.eq(phase.address)
+ ]
+ self.comb += Case(activates, cases)
+
+ # bank precharge
+ precharges = Signal(len(phases))
+ cases = {}
+ for np, phase in enumerate(phases):
+ self.comb += precharges[np].eq(phase.precharge)
+ cases[2**np] = [
+ bank.precharge.eq((phase.bank == nb) | phase.address[10])
+ ]
+ self.comb += Case(precharges, cases)
+
+ # bank writes
+ writes = Signal(len(phases))
+ cases = {}
+ for np, phase in enumerate(phases):
+ self.comb += writes[np].eq(phase.write)
+ cases[2**np] = [
+ bank.write.eq(phase.bank == nb),
+ bank.write_col.eq(phase.address)
+ ]
+ self.comb += Case(writes, cases)
+ self.comb += [
+ bank.write_data.eq(Cat(*[phase.wrdata for phase in phases])),
+ bank.write_mask.eq(Cat(*[phase.wrdata_mask for phase in phases]))
+ ]
+
+ # bank reads
+ reads = Signal(len(phases))
+ cases = {}
+ for np, phase in enumerate(phases):
+ self.comb += reads[np].eq(phase.read)
+ cases[2**np] = [
+ bank.read.eq(phase.bank == nb),
+ bank.read_col.eq(phase.address)
+ ]
+ self.comb += Case(reads, cases)
+
+ # connect banks to DFI phases (cmds, read datapath)
+ banks_read = Signal()
+ banks_read_data = Signal(data_width)
+ self.comb += [
+ banks_read.eq(optree("|", [bank.read for bank in banks])),
+ banks_read_data.eq(optree("|", [bank.read_data for bank in banks]))
+ ]
+ # simulate read latency
+ for i in range(self.settings.read_latency):
+ new_banks_read = Signal()
+ new_banks_read_data = Signal(data_width)
+ self.sync += [
+ new_banks_read.eq(banks_read),
+ new_banks_read_data.eq(banks_read_data)
+ ]
+ banks_read = new_banks_read
+ banks_read_data = new_banks_read_data
+
+ self.comb += [
+ Cat(*[phase.rddata_valid for phase in phases]).eq(banks_read),
+ Cat(*[phase.rddata for phase in phases]).eq(banks_read_data)
+ ]
--- /dev/null
+from misoc.cores.sdramphy.gensdrphy import GENSDRPHY
+from misoc.cores.sdramphy.s6ddrphy import S6HalfRateDDRPHY, S6QuarterRateDDRPHY
+from misoc.cores.sdramphy.k7ddrphy import K7DDRPHY
--- /dev/null
+#
+# 1:1 frequency-ratio Generic SDR PHY
+#
+# The GENSDRPHY is validated on CycloneIV (Altera) but since it does
+# not use vendor-dependent code, it can also be used on other architectures.
+#
+# The PHY needs 2 Clock domains:
+# - sys_clk : The System Clock domain
+# - sys_clk_ps : The System Clock domain with its phase shifted
+# (-3ns on C4@100MHz)
+#
+# Assert dfi_wrdata_en and present the data
+# on dfi_wrdata_mask/dfi_wrdata in the same
+# cycle as the write command.
+#
+# Assert dfi_rddata_en in the same cycle as the read
+# command. The data will come back on dfi_rddata
+# 4 cycles later, along with the assertion of
+# dfi_rddata_valid.
+#
+# This PHY only supports CAS Latency 2.
+#
+
+from migen import *
+from migen.genlib.record import *
+from migen.fhdl.specials import *
+
+from misoc.mem.sdram.phy.dfi import *
+from misoc.mem import sdram
+
+
+class GENSDRPHY(Module):
+ def __init__(self, pads, module):
+ addressbits = flen(pads.a)
+ bankbits = flen(pads.ba)
+ databits = flen(pads.dq)
+
+ self.settings = sdram.PhySettings(
+ memtype=module.memtype,
+ dfi_databits=databits,
+ nphases=1,
+ rdphase=0,
+ wrphase=0,
+ rdcmdphase=0,
+ wrcmdphase=0,
+ cl=2,
+ read_latency=4,
+ write_latency=0
+ )
+ self.module = module
+
+ self.dfi = Interface(addressbits, bankbits, databits)
+
+ ###
+
+ #
+ # Command/address
+ #
+ self.sync += [
+ pads.a.eq(self.dfi.p0.address),
+ pads.ba.eq(self.dfi.p0.bank),
+ pads.cke.eq(self.dfi.p0.cke),
+ pads.cas_n.eq(self.dfi.p0.cas_n),
+ pads.ras_n.eq(self.dfi.p0.ras_n),
+ pads.we_n.eq(self.dfi.p0.we_n)
+ ]
+ if hasattr(pads, "cs_n"):
+ self.sync += pads.cs_n.eq(self.dfi.p0.cs_n)
+
+ #
+ # DQ/DQS/DM data
+ #
+ sd_dq_out = Signal(databits)
+ drive_dq = Signal()
+ self.sync += sd_dq_out.eq(self.dfi.p0.wrdata)
+ self.specials += Tristate(pads.dq, sd_dq_out, drive_dq)
+ self.sync += \
+ If(self.dfi.p0.wrdata_en,
+ pads.dm.eq(self.dfi.p0.wrdata_mask)
+ ).Else(
+ pads.dm.eq(0)
+ )
+ sd_dq_in_ps = Signal(databits)
+ self.sync.sys_ps += sd_dq_in_ps.eq(pads.dq)
+ self.sync += self.dfi.p0.rddata.eq(sd_dq_in_ps)
+
+ #
+ # DQ/DM control
+ #
+ d_dfi_wrdata_en = Signal()
+ self.sync += d_dfi_wrdata_en.eq(self.dfi.p0.wrdata_en)
+ self.comb += drive_dq.eq(d_dfi_wrdata_en)
+
+ rddata_sr = Signal(4)
+ self.comb += self.dfi.p0.rddata_valid.eq(rddata_sr[3])
+ self.sync += rddata_sr.eq(Cat(self.dfi.p0.rddata_en, rddata_sr[:3]))
--- /dev/null
+# tCK=5ns CL=7 CWL=6
+
+from migen import *
+from migen.bank.description import *
+
+from misoc.mem.sdram.phy.dfi import *
+from misoc.mem import sdram
+
+
+class K7DDRPHY(Module, AutoCSR):
+ def __init__(self, pads, module):
+ addressbits = flen(pads.a)
+ bankbits = flen(pads.ba)
+ databits = flen(pads.dq)
+ nphases = 4
+
+ self._wlevel_en = CSRStorage()
+ self._wlevel_strobe = CSR()
+ self._dly_sel = CSRStorage(databits//8)
+ self._rdly_dq_rst = CSR()
+ self._rdly_dq_inc = CSR()
+ self._rdly_dq_bitslip = CSR()
+ self._wdly_dq_rst = CSR()
+ self._wdly_dq_inc = CSR()
+ self._wdly_dqs_rst = CSR()
+ self._wdly_dqs_inc = CSR()
+
+ self.settings = sdram.PhySettings(
+ memtype=module.memtype,
+ dfi_databits=2*databits,
+ nphases=nphases,
+ rdphase=0,
+ wrphase=2,
+ rdcmdphase=1,
+ wrcmdphase=0,
+ cl=7,
+ cwl=6,
+ read_latency=6,
+ write_latency=2
+ )
+ self.module = module
+
+ self.dfi = Interface(addressbits, bankbits, 2*databits, nphases)
+
+ ###
+
+ # Clock
+ sd_clk_se = Signal()
+ self.specials += [
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OQ=sd_clk_se,
+ i_OCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=0, i_D2=1, i_D3=0, i_D4=1,
+ i_D5=0, i_D6=1, i_D7=0, i_D8=1
+ ),
+ Instance("OBUFDS",
+ i_I=sd_clk_se,
+ o_O=pads.clk_p,
+ o_OB=pads.clk_n
+ )
+ ]
+
+ # Addresses and commands
+ for i in range(addressbits):
+ self.specials += \
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OQ=pads.a[i],
+ i_OCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=self.dfi.phases[0].address[i], i_D2=self.dfi.phases[0].address[i],
+ i_D3=self.dfi.phases[1].address[i], i_D4=self.dfi.phases[1].address[i],
+ i_D5=self.dfi.phases[2].address[i], i_D6=self.dfi.phases[2].address[i],
+ i_D7=self.dfi.phases[3].address[i], i_D8=self.dfi.phases[3].address[i]
+ )
+ for i in range(bankbits):
+ self.specials += \
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OQ=pads.ba[i],
+ i_OCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=self.dfi.phases[0].bank[i], i_D2=self.dfi.phases[0].bank[i],
+ i_D3=self.dfi.phases[1].bank[i], i_D4=self.dfi.phases[1].bank[i],
+ i_D5=self.dfi.phases[2].bank[i], i_D6=self.dfi.phases[2].bank[i],
+ i_D7=self.dfi.phases[3].bank[i], i_D8=self.dfi.phases[3].bank[i]
+ )
+ for name in "ras_n", "cas_n", "we_n", "cs_n", "cke", "odt", "reset_n":
+ self.specials += \
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OQ=getattr(pads, name),
+ i_OCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=getattr(self.dfi.phases[0], name), i_D2=getattr(self.dfi.phases[0], name),
+ i_D3=getattr(self.dfi.phases[1], name), i_D4=getattr(self.dfi.phases[1], name),
+ i_D5=getattr(self.dfi.phases[2], name), i_D6=getattr(self.dfi.phases[2], name),
+ i_D7=getattr(self.dfi.phases[3], name), i_D8=getattr(self.dfi.phases[3], name)
+ )
+
+ # DQS and DM
+ oe_dqs = Signal()
+ dqs_serdes_pattern = Signal(8)
+ self.comb += \
+ If(self._wlevel_en.storage,
+ If(self._wlevel_strobe.re,
+ dqs_serdes_pattern.eq(0b00000001)
+ ).Else(
+ dqs_serdes_pattern.eq(0b00000000)
+ )
+ ).Else(
+ dqs_serdes_pattern.eq(0b01010101)
+ )
+ for i in range(databits//8):
+ dm_o_nodelay = Signal()
+ self.specials += \
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OQ=dm_o_nodelay,
+ i_OCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=self.dfi.phases[0].wrdata_mask[i], i_D2=self.dfi.phases[0].wrdata_mask[databits//8+i],
+ i_D3=self.dfi.phases[1].wrdata_mask[i], i_D4=self.dfi.phases[1].wrdata_mask[databits//8+i],
+ i_D5=self.dfi.phases[2].wrdata_mask[i], i_D6=self.dfi.phases[2].wrdata_mask[databits//8+i],
+ i_D7=self.dfi.phases[3].wrdata_mask[i], i_D8=self.dfi.phases[3].wrdata_mask[databits//8+i]
+ )
+ self.specials += \
+ Instance("ODELAYE2",
+ p_DELAY_SRC="ODATAIN", p_SIGNAL_PATTERN="DATA",
+ p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
+ p_PIPE_SEL="FALSE", p_ODELAY_TYPE="VARIABLE", p_ODELAY_VALUE=0,
+
+ i_C=ClockSignal(),
+ i_LD=self._dly_sel.storage[i] & self._wdly_dq_rst.re,
+ i_CE=self._dly_sel.storage[i] & self._wdly_dq_inc.re,
+ i_LDPIPEEN=0, i_INC=1,
+
+ o_ODATAIN=dm_o_nodelay, o_DATAOUT=pads.dm[i]
+ )
+
+ dqs_nodelay = Signal()
+ dqs_delayed = Signal()
+ dqs_t = Signal()
+ self.specials += [
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OFB=dqs_nodelay, o_TQ=dqs_t,
+ i_OCE=1, i_TCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=dqs_serdes_pattern[0], i_D2=dqs_serdes_pattern[1],
+ i_D3=dqs_serdes_pattern[2], i_D4=dqs_serdes_pattern[3],
+ i_D5=dqs_serdes_pattern[4], i_D6=dqs_serdes_pattern[5],
+ i_D7=dqs_serdes_pattern[6], i_D8=dqs_serdes_pattern[7],
+ i_T1=~oe_dqs
+ ),
+ Instance("ODELAYE2",
+ p_DELAY_SRC="ODATAIN", p_SIGNAL_PATTERN="DATA",
+ p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
+ p_PIPE_SEL="FALSE", p_ODELAY_TYPE="VARIABLE", p_ODELAY_VALUE=6,
+
+ i_C=ClockSignal(),
+ i_LD=self._dly_sel.storage[i] & self._wdly_dqs_rst.re,
+ i_CE=self._dly_sel.storage[i] & self._wdly_dqs_inc.re,
+ i_LDPIPEEN=0, i_INC=1,
+
+ o_ODATAIN=dqs_nodelay, o_DATAOUT=dqs_delayed
+ ),
+ Instance("OBUFTDS",
+ i_I=dqs_delayed, i_T=dqs_t,
+ o_O=pads.dqs_p[i], o_OB=pads.dqs_n[i]
+ )
+ ]
+
+ # DQ
+ oe_dq = Signal()
+ for i in range(databits):
+ dq_o_nodelay = Signal()
+ dq_o_delayed = Signal()
+ dq_i_nodelay = Signal()
+ dq_i_delayed = Signal()
+ dq_t = Signal()
+ self.specials += [
+ Instance("OSERDESE2",
+ p_DATA_WIDTH=8, p_TRISTATE_WIDTH=1,
+ p_DATA_RATE_OQ="DDR", p_DATA_RATE_TQ="BUF",
+ p_SERDES_MODE="MASTER",
+
+ o_OQ=dq_o_nodelay, o_TQ=dq_t,
+ i_OCE=1, i_TCE=1,
+ i_RST=ResetSignal(),
+ i_CLK=ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_D1=self.dfi.phases[0].wrdata[i], i_D2=self.dfi.phases[0].wrdata[databits+i],
+ i_D3=self.dfi.phases[1].wrdata[i], i_D4=self.dfi.phases[1].wrdata[databits+i],
+ i_D5=self.dfi.phases[2].wrdata[i], i_D6=self.dfi.phases[2].wrdata[databits+i],
+ i_D7=self.dfi.phases[3].wrdata[i], i_D8=self.dfi.phases[3].wrdata[databits+i],
+ i_T1=~oe_dq
+ ),
+ Instance("ISERDESE2",
+ p_DATA_WIDTH=8, p_DATA_RATE="DDR",
+ p_SERDES_MODE="MASTER", p_INTERFACE_TYPE="NETWORKING",
+ p_NUM_CE=1, p_IOBDELAY="IFD",
+
+ i_DDLY=dq_i_delayed,
+ i_CE1=1,
+ i_RST=ResetSignal() | (self._dly_sel.storage[i//8] & self._wdly_dq_rst.re),
+ i_CLK=ClockSignal("sys4x"), i_CLKB=~ClockSignal("sys4x"), i_CLKDIV=ClockSignal(),
+ i_BITSLIP=self._dly_sel.storage[i//8] & self._rdly_dq_bitslip.re,
+ o_Q8=self.dfi.phases[0].rddata[i], o_Q7=self.dfi.phases[0].rddata[databits+i],
+ o_Q6=self.dfi.phases[1].rddata[i], o_Q5=self.dfi.phases[1].rddata[databits+i],
+ o_Q4=self.dfi.phases[2].rddata[i], o_Q3=self.dfi.phases[2].rddata[databits+i],
+ o_Q2=self.dfi.phases[3].rddata[i], o_Q1=self.dfi.phases[3].rddata[databits+i]
+ ),
+ Instance("ODELAYE2",
+ p_DELAY_SRC="ODATAIN", p_SIGNAL_PATTERN="DATA",
+ p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
+ p_PIPE_SEL="FALSE", p_ODELAY_TYPE="VARIABLE", p_ODELAY_VALUE=0,
+
+ i_C=ClockSignal(),
+ i_LD=self._dly_sel.storage[i//8] & self._wdly_dq_rst.re,
+ i_CE=self._dly_sel.storage[i//8] & self._wdly_dq_inc.re,
+ i_LDPIPEEN=0, i_INC=1,
+
+ o_ODATAIN=dq_o_nodelay, o_DATAOUT=dq_o_delayed
+ ),
+ Instance("IDELAYE2",
+ p_DELAY_SRC="IDATAIN", p_SIGNAL_PATTERN="DATA",
+ p_CINVCTRL_SEL="FALSE", p_HIGH_PERFORMANCE_MODE="TRUE", p_REFCLK_FREQUENCY=200.0,
+ p_PIPE_SEL="FALSE", p_IDELAY_TYPE="VARIABLE", p_IDELAY_VALUE=6,
+
+ i_C=ClockSignal(),
+ i_LD=self._dly_sel.storage[i//8] & self._rdly_dq_rst.re,
+ i_CE=self._dly_sel.storage[i//8] & self._rdly_dq_inc.re,
+ i_LDPIPEEN=0, i_INC=1,
+
+ i_IDATAIN=dq_i_nodelay, o_DATAOUT=dq_i_delayed
+ ),
+ Instance("IOBUF",
+ i_I=dq_o_delayed, o_O=dq_i_nodelay, i_T=dq_t,
+ io_IO=pads.dq[i]
+ )
+ ]
+
+ # Flow control
+ #
+ # total read latency = 6:
+ # 2 cycles through OSERDESE2
+ # 2 cycles CAS
+ # 2 cycles through ISERDESE2
+ rddata_en = self.dfi.phases[self.settings.rdphase].rddata_en
+ for i in range(5):
+ n_rddata_en = Signal()
+ self.sync += n_rddata_en.eq(rddata_en)
+ rddata_en = n_rddata_en
+ self.sync += [phase.rddata_valid.eq(rddata_en | self._wlevel_en.storage)
+ for phase in self.dfi.phases]
+
+ oe = Signal()
+ last_wrdata_en = Signal(4)
+ wrphase = self.dfi.phases[self.settings.wrphase]
+ self.sync += last_wrdata_en.eq(Cat(wrphase.wrdata_en, last_wrdata_en[:3]))
+ self.comb += oe.eq(last_wrdata_en[1] | last_wrdata_en[2] | last_wrdata_en[3])
+ self.sync += \
+ If(self._wlevel_en.storage,
+ oe_dqs.eq(1), oe_dq.eq(0)
+ ).Else(
+ oe_dqs.eq(oe), oe_dq.eq(oe)
+ )
--- /dev/null
+# 1:2 and 1:4 frequency-ratio DDR / LPDDR / DDR2 / DDR3 PHYs for Spartan-6
+#
+# Assert dfi_wrdata_en and present the data
+# on dfi_wrdata_mask/dfi_wrdata in the same
+# cycle as the write command.
+#
+# Assert dfi_rddata_en in the same cycle as the read
+# command. The data will come back on dfi_rddata
+# 5 cycles later, along with the assertion
+# of dfi_rddata_valid.
+#
+# This PHY only supports CAS latency 3 for DDR, LPDDR, DDR2
+# and CAS latency 5/CAS write latency 6 for DDR3.
+#
+# Read commands must be sent on phase 0.
+# Write commands must be sent on phase 1.
+#
+
+from migen import *
+from migen.genlib.record import *
+
+from misoc.mem.sdram.phy.dfi import *
+from misoc.mem import sdram
+
+
+class S6HalfRateDDRPHY(Module):
+ def __init__(self, pads, module, rd_bitslip, wr_bitslip, dqs_ddr_alignment):
+ if module.memtype not in ["DDR", "LPDDR", "DDR2", "DDR3"]:
+ raise NotImplementedError("S6HalfRateDDRPHY only supports DDR, LPDDR, DDR2 and DDR3")
+ addressbits = flen(pads.a)
+ bankbits = flen(pads.ba)
+ databits = flen(pads.dq)
+ nphases = 2
+
+ if module.memtype == "DDR3":
+ self.settings = sdram.PhySettings(
+ memtype="DDR3",
+ dfi_databits=2*databits,
+ nphases=nphases,
+ rdphase=0,
+ wrphase=1,
+ rdcmdphase=1,
+ wrcmdphase=0,
+ cl=5,
+ cwl=6,
+ read_latency=6,
+ write_latency=2
+ )
+ else:
+ self.settings = sdram.PhySettings(
+ memtype=module.memtype,
+ dfi_databits=2*databits,
+ nphases=nphases,
+ rdphase=0,
+ wrphase=1,
+ rdcmdphase=1,
+ wrcmdphase=0,
+ cl=3,
+ read_latency=5,
+ write_latency=0
+ )
+
+ self.module = module
+
+ self.dfi = Interface(addressbits, bankbits, 2*databits, nphases)
+ self.clk4x_wr_strb = Signal()
+ self.clk4x_rd_strb = Signal()
+
+ ###
+
+ # sys_clk : system clk, used for dfi interface
+ # sdram_half_clk : half rate sdram clk
+ # sdram_full_wr_clk : full rate sdram write clk
+ # sdram_full_rd_clk : full rate sdram read clk
+ sd_sys = getattr(self.sync, "sys")
+ sd_sdram_half = getattr(self.sync, "sdram_half")
+
+ sys_clk = ClockSignal("sys")
+ sdram_half_clk = ClockSignal("sdram_half")
+ sdram_full_wr_clk = ClockSignal("sdram_full_wr")
+ sdram_full_rd_clk = ClockSignal("sdram_full_rd")
+
+ #
+ # Command/address
+ #
+
+ # select active phase
+ # sys_clk ----____----____
+ # phase_sel(nphases=2) 0 1 0 1 Half Rate
+ phase_sel = Signal(log2_int(nphases))
+ phase_half = Signal.like(phase_sel)
+ phase_sys = Signal.like(phase_half)
+
+ sd_sys += phase_sys.eq(phase_half)
+
+ sd_sdram_half += [
+ If(phase_half == phase_sys,
+ phase_sel.eq(0),
+ ).Else(
+ phase_sel.eq(phase_sel+1)
+ ),
+ phase_half.eq(phase_half+1),
+ ]
+
+ # register dfi cmds on half_rate clk
+ r_dfi = Array(Record(phase_cmd_description(addressbits, bankbits)) for i in range(nphases))
+ for n, phase in enumerate(self.dfi.phases):
+ sd_sdram_half += [
+ r_dfi[n].reset_n.eq(phase.reset_n),
+ r_dfi[n].odt.eq(phase.odt),
+ r_dfi[n].address.eq(phase.address),
+ r_dfi[n].bank.eq(phase.bank),
+ r_dfi[n].cs_n.eq(phase.cs_n),
+ r_dfi[n].cke.eq(phase.cke),
+ r_dfi[n].cas_n.eq(phase.cas_n),
+ r_dfi[n].ras_n.eq(phase.ras_n),
+ r_dfi[n].we_n.eq(phase.we_n)
+ ]
+
+ # output cmds
+ sd_sdram_half += [
+ pads.a.eq(r_dfi[phase_sel].address),
+ pads.ba.eq(r_dfi[phase_sel].bank),
+ pads.cke.eq(r_dfi[phase_sel].cke),
+ pads.ras_n.eq(r_dfi[phase_sel].ras_n),
+ pads.cas_n.eq(r_dfi[phase_sel].cas_n),
+ pads.we_n.eq(r_dfi[phase_sel].we_n)
+ ]
+ # optional pads
+ for name in "reset_n", "cs_n", "odt":
+ if hasattr(pads, name):
+ sd_sdram_half += getattr(pads, name).eq(getattr(r_dfi[phase_sel], name))
+
+ #
+ # Bitslip
+ #
+ bitslip_cnt = Signal(4)
+ bitslip_inc = Signal()
+
+ sd_sys += [
+ If(bitslip_cnt == rd_bitslip,
+ bitslip_inc.eq(0)
+ ).Else(
+ bitslip_cnt.eq(bitslip_cnt+1),
+ bitslip_inc.eq(1)
+ )
+ ]
+
+ #
+ # DQ/DQS/DM data
+ #
+ sdram_half_clk_n = Signal()
+ self.comb += sdram_half_clk_n.eq(~sdram_half_clk)
+
+ postamble = Signal()
+ drive_dqs = Signal()
+ dqs_t_d0 = Signal()
+ dqs_t_d1 = Signal()
+
+ dqs_o = Signal(databits//8)
+ dqs_t = Signal(databits//8)
+
+ self.comb += [
+ dqs_t_d0.eq(~(drive_dqs | postamble)),
+ dqs_t_d1.eq(~drive_dqs),
+ ]
+
+ for i in range(databits//8):
+ # DQS output
+ self.specials += Instance("ODDR2",
+ p_DDR_ALIGNMENT=dqs_ddr_alignment,
+ p_INIT=0,
+ p_SRTYPE="ASYNC",
+
+ i_C0=sdram_half_clk,
+ i_C1=sdram_half_clk_n,
+
+ i_CE=1,
+ i_D0=0,
+ i_D1=1,
+ i_R=0,
+ i_S=0,
+
+ o_Q=dqs_o[i]
+ )
+
+ # DQS tristate cmd
+ self.specials += Instance("ODDR2",
+ p_DDR_ALIGNMENT=dqs_ddr_alignment,
+ p_INIT=0,
+ p_SRTYPE="ASYNC",
+
+ i_C0=sdram_half_clk,
+ i_C1=sdram_half_clk_n,
+
+ i_CE=1,
+ i_D0=dqs_t_d0,
+ i_D1=dqs_t_d1,
+ i_R=0,
+ i_S=0,
+
+ o_Q=dqs_t[i]
+ )
+
+ # DQS tristate buffer
+ if hasattr(pads, "dqs_n"):
+ self.specials += Instance("OBUFTDS",
+ i_I=dqs_o[i],
+ i_T=dqs_t[i],
+
+ o_O=pads.dqs[i],
+ o_OB=pads.dqs_n[i],
+ )
+ else:
+ self.specials += Instance("OBUFT",
+ i_I=dqs_o[i],
+ i_T=dqs_t[i],
+
+ o_O=pads.dqs[i]
+ )
+
+ sd_sdram_half += postamble.eq(drive_dqs)
+
+ d_dfi = [Record(phase_wrdata_description(nphases*databits)+phase_rddata_description(nphases*databits))
+ for i in range(2*nphases)]
+
+ for n, phase in enumerate(self.dfi.phases):
+ self.comb += [
+ d_dfi[n].wrdata.eq(phase.wrdata),
+ d_dfi[n].wrdata_mask.eq(phase.wrdata_mask),
+ d_dfi[n].wrdata_en.eq(phase.wrdata_en),
+ d_dfi[n].rddata_en.eq(phase.rddata_en),
+ ]
+ sd_sys += [
+ d_dfi[nphases+n].wrdata.eq(phase.wrdata),
+ d_dfi[nphases+n].wrdata_mask.eq(phase.wrdata_mask)
+ ]
+
+
+ drive_dq = Signal()
+ drive_dq_n = [Signal() for i in range(2)]
+ self.comb += drive_dq_n[0].eq(~drive_dq)
+ sd_sys += drive_dq_n[1].eq(drive_dq_n[0])
+
+ dq_t = Signal(databits)
+ dq_o = Signal(databits)
+ dq_i = Signal(databits)
+
+ dq_wrdata = []
+ for i in range(2):
+ for j in reversed(range(nphases)):
+ dq_wrdata.append(d_dfi[i*nphases+j].wrdata[:databits])
+ dq_wrdata.append(d_dfi[i*nphases+j].wrdata[databits:])
+
+ for i in range(databits):
+ # Data serializer
+ self.specials += Instance("OSERDES2",
+ p_DATA_WIDTH=4,
+ p_DATA_RATE_OQ="SDR",
+ p_DATA_RATE_OT="SDR",
+ p_SERDES_MODE="NONE",
+ p_OUTPUT_MODE="SINGLE_ENDED",
+
+ o_OQ=dq_o[i],
+ i_OCE=1,
+ i_CLK0=sdram_full_wr_clk,
+ i_CLK1=0,
+ i_IOCE=self.clk4x_wr_strb,
+ i_RST=0,
+ i_CLKDIV=sys_clk,
+
+ i_D1=dq_wrdata[wr_bitslip+3][i],
+ i_D2=dq_wrdata[wr_bitslip+2][i],
+ i_D3=dq_wrdata[wr_bitslip+1][i],
+ i_D4=dq_wrdata[wr_bitslip+0][i],
+
+ o_TQ=dq_t[i],
+ i_T1=drive_dq_n[(wr_bitslip+3)//4],
+ i_T2=drive_dq_n[(wr_bitslip+2)//4],
+ i_T3=drive_dq_n[(wr_bitslip+1)//4],
+ i_T4=drive_dq_n[(wr_bitslip+0)//4],
+ i_TRAIN=0,
+ i_TCE=1,
+ i_SHIFTIN1=0,
+ i_SHIFTIN2=0,
+ i_SHIFTIN3=0,
+ i_SHIFTIN4=0,
+ )
+
+ # Data deserializer
+ self.specials += Instance("ISERDES2",
+ p_DATA_WIDTH=4,
+ p_DATA_RATE="SDR",
+ p_BITSLIP_ENABLE="TRUE",
+ p_SERDES_MODE="NONE",
+ p_INTERFACE_TYPE="RETIMED",
+
+ i_D=dq_i[i],
+ i_CE0=1,
+ i_CLK0=sdram_full_rd_clk,
+ i_CLK1=0,
+ i_IOCE=self.clk4x_rd_strb,
+ i_RST=ResetSignal(),
+ i_CLKDIV=sys_clk,
+ i_BITSLIP=bitslip_inc,
+
+ o_Q1=d_dfi[0*nphases+0].rddata[i+databits],
+ o_Q2=d_dfi[0*nphases+0].rddata[i],
+ o_Q3=d_dfi[0*nphases+1].rddata[i+databits],
+ o_Q4=d_dfi[0*nphases+1].rddata[i],
+ )
+
+ # Data buffer
+ self.specials += Instance("IOBUF",
+ i_I=dq_o[i],
+ o_O=dq_i[i],
+ i_T=dq_t[i],
+ io_IO=pads.dq[i]
+ )
+
+ dq_wrdata_mask = []
+ for i in range(2):
+ for j in reversed(range(nphases)):
+ dq_wrdata_mask.append(d_dfi[i*nphases+j].wrdata_mask[:databits//8])
+ dq_wrdata_mask.append(d_dfi[i*nphases+j].wrdata_mask[databits//8:])
+
+ for i in range(databits//8):
+ # Mask serializer
+ self.specials += Instance("OSERDES2",
+ p_DATA_WIDTH=4,
+ p_DATA_RATE_OQ="SDR",
+ p_DATA_RATE_OT="SDR",
+ p_SERDES_MODE="NONE",
+ p_OUTPUT_MODE="SINGLE_ENDED",
+
+ o_OQ=pads.dm[i],
+ i_OCE=1,
+ i_CLK0=sdram_full_wr_clk,
+ i_CLK1=0,
+ i_IOCE=self.clk4x_wr_strb,
+ i_RST=0,
+ i_CLKDIV=sys_clk,
+
+ i_D1=dq_wrdata_mask[wr_bitslip+3][i],
+ i_D2=dq_wrdata_mask[wr_bitslip+2][i],
+ i_D3=dq_wrdata_mask[wr_bitslip+1][i],
+ i_D4=dq_wrdata_mask[wr_bitslip+0][i],
+
+ i_TRAIN=0,
+ i_TCE=0,
+ i_SHIFTIN1=0,
+ i_SHIFTIN2=0,
+ i_SHIFTIN3=0,
+ i_SHIFTIN4=0,
+ )
+
+
+ #
+ # DQ/DQS/DM control
+ #
+
+ # write
+ wrdata_en = Signal()
+ self.comb += wrdata_en.eq(optree("|", [d_dfi[p].wrdata_en for p in range(nphases)]))
+
+ if module.memtype == "DDR3":
+ r_drive_dq = Signal(self.settings.cwl-1)
+ sd_sdram_half += r_drive_dq.eq(Cat(wrdata_en, r_drive_dq))
+ self.comb += drive_dq.eq(r_drive_dq[self.settings.cwl-2])
+ else:
+ self.comb += drive_dq.eq(wrdata_en)
+
+ wrdata_en_d = Signal()
+ sd_sys += wrdata_en_d.eq(wrdata_en)
+
+ r_dfi_wrdata_en = Signal(max(self.settings.cwl, self.settings.cl))
+ sd_sdram_half += r_dfi_wrdata_en.eq(Cat(wrdata_en_d, r_dfi_wrdata_en))
+
+ if module.memtype == "DDR3":
+ self.comb += drive_dqs.eq(r_dfi_wrdata_en[self.settings.cwl-1])
+ else:
+ self.comb += drive_dqs.eq(r_dfi_wrdata_en[1])
+
+ # read
+ rddata_en = Signal()
+ self.comb += rddata_en.eq(optree("|", [d_dfi[p].rddata_en for p in range(nphases)]))
+
+ rddata_sr = Signal(self.settings.read_latency)
+ sd_sys += rddata_sr.eq(Cat(rddata_sr[1:self.settings.read_latency], rddata_en))
+
+ for n, phase in enumerate(self.dfi.phases):
+ self.comb += [
+ phase.rddata.eq(d_dfi[n].rddata),
+ phase.rddata_valid.eq(rddata_sr[0]),
+ ]
+
+
+class S6QuarterRateDDRPHY(Module):
+ def __init__(self, pads, module, rd_bitslip, wr_bitslip, dqs_ddr_alignment):
+ if module.memtype not in ["DDR3"]:
+ raise NotImplementedError("S6QuarterRateDDRPHY only supports DDR3")
+ half_rate_phy = S6HalfRateDDRPHY(pads, module, rd_bitslip, wr_bitslip, dqs_ddr_alignment)
+ self.submodules += RenameClockDomains(half_rate_phy, {"sys" : "sys2x"})
+
+ addressbits = flen(pads.a)
+ bankbits = flen(pads.ba)
+ databits = flen(pads.dq)
+ nphases = 4
+
+ self.settings = sdram.PhySettings(
+ memtype="DDR3",
+ dfi_databits=2*databits,
+ nphases=nphases,
+ rdphase=0,
+ wrphase=1,
+ rdcmdphase=1,
+ wrcmdphase=0,
+ cl=5,
+ cwl=6,
+ read_latency=6//2+1,
+ write_latency=2//2
+ )
+
+ self.module = module
+
+ self.dfi = Interface(addressbits, bankbits, 2*databits, nphases)
+ self.clk8x_wr_strb = half_rate_phy.clk4x_wr_strb
+ self.clk8x_rd_strb = half_rate_phy.clk4x_rd_strb
+
+ # sys_clk : system clk, used for dfi interface
+ # sys2x_clk : 2x system clk
+ sd_sys = getattr(self.sync, "sys")
+ sd_sys2x = getattr(self.sync, "sys2x")
+
+ # select active sys2x phase
+ # sys_clk ----____----____
+ # phase_sel 0 1 0 1
+ phase_sel = Signal()
+ phase_sys2x = Signal.like(phase_sel)
+ phase_sys = Signal.like(phase_sys2x)
+
+ sd_sys += phase_sys.eq(phase_sys2x)
+
+ sd_sys2x += [
+ If(phase_sys2x == phase_sys,
+ phase_sel.eq(0),
+ ).Else(
+ phase_sel.eq(~phase_sel)
+ ),
+ phase_sys2x.eq(~phase_sel)
+ ]
+
+ # DFI adaptation
+
+ # Commands and writes
+ dfi_leave_out = set(["rddata", "rddata_valid", "wrdata_en"])
+ self.comb += [
+ If(~phase_sel,
+ Record.connect(self.dfi.phases[0], half_rate_phy.dfi.phases[0], leave_out=dfi_leave_out),
+ Record.connect(self.dfi.phases[1], half_rate_phy.dfi.phases[1], leave_out=dfi_leave_out),
+ ).Else(
+ Record.connect(self.dfi.phases[2], half_rate_phy.dfi.phases[0], leave_out=dfi_leave_out),
+ Record.connect(self.dfi.phases[3], half_rate_phy.dfi.phases[1], leave_out=dfi_leave_out),
+ ),
+ ]
+ wr_data_en = self.dfi.phases[self.settings.wrphase].wrdata_en & ~phase_sel
+ wr_data_en_d = Signal()
+ sd_sys2x += wr_data_en_d.eq(wr_data_en)
+ self.comb += half_rate_phy.dfi.phases[half_rate_phy.settings.wrphase].wrdata_en.eq(wr_data_en | wr_data_en_d)
+
+ # Reads
+ rddata = Array(Signal(2*databits) for i in range(2))
+ rddata_valid = Signal(2)
+
+ for i in range(2):
+ sd_sys2x += [
+ rddata_valid[i].eq(half_rate_phy.dfi.phases[i].rddata_valid),
+ rddata[i].eq(half_rate_phy.dfi.phases[i].rddata)
+ ]
+
+ sd_sys += [
+ self.dfi.phases[0].rddata.eq(rddata[0]),
+ self.dfi.phases[0].rddata_valid.eq(rddata_valid[0]),
+ self.dfi.phases[1].rddata.eq(rddata[1]),
+ self.dfi.phases[1].rddata_valid.eq(rddata_valid[1]),
+ self.dfi.phases[2].rddata.eq(half_rate_phy.dfi.phases[0].rddata),
+ self.dfi.phases[2].rddata_valid.eq(half_rate_phy.dfi.phases[0].rddata_valid),
+ self.dfi.phases[3].rddata.eq(half_rate_phy.dfi.phases[1].rddata),
+ self.dfi.phases[3].rddata_valid.eq(half_rate_phy.dfi.phases[1].rddata_valid)
+ ]
--- /dev/null
+from math import ceil
+from collections import namedtuple
+
+from migen import *
+from misoc.mem import sdram
+
+
+PhySettingsT = namedtuple("PhySettings", "memtype dfi_databits nphases rdphase wrphase rdcmdphase wrcmdphase cl cwl read_latency write_latency")
+def PhySettings(memtype, dfi_databits, nphases, rdphase, wrphase, rdcmdphase, wrcmdphase, cl, read_latency, write_latency, cwl=0):
+ return PhySettingsT(memtype, dfi_databits, nphases, rdphase, wrphase, rdcmdphase, wrcmdphase, cl, cwl, read_latency, write_latency)
+
+GeomSettingsT = namedtuple("_GeomSettings", "bankbits rowbits colbits addressbits")
+def GeomSettings(bankbits, rowbits, colbits):
+ return GeomSettingsT(bankbits, rowbits, colbits, max(rowbits, colbits))
+
+TimingSettings = namedtuple("TimingSettings", "tRP tRCD tWR tWTR tREFI tRFC")
+
+
+# TODO:
+# Try to share the maximum information we can between modules:
+# - ex: MT46V32M16 and MT46H32M16 are almost identical (V=DDR, H=LPDDR)
+# - Modules can have different configuration:
+# MT8JTF12864 (1GB), MT8JTF25664 (2GB)
+# but share all others informations, try to create an unique module for all
+# configurations.
+# - Modules can have different speedgrades, add support for it (and also add
+# a check to verify clk_freq is in the supported range)
+
+
+class SDRAMModule:
+ def __init__(self, clk_freq, memtype, geom_settings, timing_settings):
+ self.clk_freq = clk_freq
+ self.memtype = memtype
+ self.geom_settings = sdram.GeomSettings(
+ bankbits=log2_int(geom_settings["nbanks"]),
+ rowbits=log2_int(geom_settings["nrows"]),
+ colbits=log2_int(geom_settings["ncols"]),
+ )
+ self.timing_settings = sdram.TimingSettings(
+ tRP=self.ns(timing_settings["tRP"]),
+ tRCD=self.ns(timing_settings["tRCD"]),
+ tWR=self.ns(timing_settings["tWR"]),
+ tWTR=timing_settings["tWTR"],
+ tREFI=self.ns(timing_settings["tREFI"], False),
+ tRFC=self.ns(timing_settings["tRFC"])
+ )
+
+ def ns(self, t, margin=True):
+ clk_period_ns = 1000000000/self.clk_freq
+ if margin:
+ t += clk_period_ns/2
+ return ceil(t/clk_period_ns)
+
+
+# SDR
+class IS42S16160(SDRAMModule):
+ geom_settings = {
+ "nbanks": 4,
+ "nrows": 8192,
+ "ncols": 512
+ }
+ # Note: timings for -7 speedgrade (add support for others speedgrades)
+ timing_settings = {
+ "tRP": 20,
+ "tRCD": 20,
+ "tWR": 20,
+ "tWTR": 2,
+ "tREFI": 64*1000*1000/8192,
+ "tRFC": 70
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "SDR", self.geom_settings,
+ self.timing_settings)
+
+
+class MT48LC4M16(SDRAMModule):
+ geom_settings = {
+ "nbanks": 4,
+ "nrows": 4096,
+ "ncols": 256
+ }
+ timing_settings = {
+ "tRP": 15,
+ "tRCD": 15,
+ "tWR": 14,
+ "tWTR": 2,
+ "tREFI": 64*1000*1000/4096,
+ "tRFC": 66
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "SDR", self.geom_settings,
+ self.timing_settings)
+
+
+class AS4C16M16(SDRAMModule):
+ geom_settings = {
+ "nbanks": 4,
+ "nrows": 8192,
+ "ncols": 512
+ }
+ # Note: timings for -6 speedgrade (add support for others speedgrades)
+ timing_settings = {
+ "tRP": 18,
+ "tRCD": 18,
+ "tWR": 12,
+ "tWTR": 2,
+ "tREFI": 64*1000*1000/8192,
+ "tRFC": 60
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "SDR", self.geom_settings,
+ self.timing_settings)
+
+
+# DDR
+class MT46V32M16(SDRAMModule):
+ geom_settings = {
+ "nbanks": 4,
+ "nrows": 8192,
+ "ncols": 1024
+ }
+ timing_settings = {
+ "tRP": 15,
+ "tRCD": 15,
+ "tWR": 15,
+ "tWTR": 2,
+ "tREFI": 64*1000*1000/8192,
+ "tRFC": 70
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "DDR", self.geom_settings,
+ self.timing_settings)
+
+
+# LPDDR
+class MT46H32M16(SDRAMModule):
+ geom_settings = {
+ "nbanks": 4,
+ "nrows": 8192,
+ "ncols": 1024
+ }
+ timing_settings = {
+ "tRP": 15,
+ "tRCD": 15,
+ "tWR": 15,
+ "tWTR": 2,
+ "tREFI": 64*1000*1000/8192,
+ "tRFC": 72
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "LPDDR", self.geom_settings,
+ self.timing_settings)
+
+
+# DDR2
+class MT47H128M8(SDRAMModule):
+ geom_settings = {
+ "nbanks": 8,
+ "nrows": 16384,
+ "ncols": 1024
+ }
+ timing_settings = {
+ "tRP": 15,
+ "tRCD": 15,
+ "tWR": 15,
+ "tWTR": 2,
+ "tREFI": 7800,
+ "tRFC": 127.5
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "DDR2", self.geom_settings,
+ self.timing_settings)
+
+
+class P3R1GE4JGF(SDRAMModule):
+ geom_settings = {
+ "nbanks": 8,
+ "nrows": 8192,
+ "ncols": 1024
+ }
+ timing_settings = {
+ "tRP": 12.5,
+ "tRCD": 12.5,
+ "tWR": 15,
+ "tWTR": 3,
+ "tREFI": 7800,
+ "tRFC": 127.5,
+ }
+
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "DDR2", self.geom_settings,
+ self.timing_settings)
+
+
+# DDR3
+class MT8JTF12864(SDRAMModule):
+ geom_settings = {
+ "nbanks": 8,
+ "nrows": 16384,
+ "ncols": 1024
+ }
+ timing_settings = {
+ "tRP": 15,
+ "tRCD": 15,
+ "tWR": 15,
+ "tWTR": 2,
+ "tREFI": 7800,
+ "tRFC": 70
+ }
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "DDR3", self.geom_settings,
+ self.timing_settings)
+
+
+class MT41J128M16(SDRAMModule):
+ geom_settings = {
+ "nbanks": 8,
+ "nrows": 16384,
+ "ncols": 1024,
+ }
+ timing_settings = {
+ "tRP": 15,
+ "tRCD": 15,
+ "tWR": 15,
+ "tWTR": 3,
+ "tREFI": 64*1000*1000/16384,
+ "tRFC": 260,
+ }
+
+ def __init__(self, clk_freq):
+ SDRAMModule.__init__(self, clk_freq, "DDR3", self.geom_settings,
+ self.timing_settings)
--- /dev/null
+from migen import *
+from migen.genlib.misc import optree
+from migen.bank.description import *
+from migen.actorlib.spi import *
+
+from misoc.mem.sdram.frontend import dma_lasmi
+
+
+@DecorateModule(InsertReset)
+@DecorateModule(InsertCE)
+class LFSR(Module):
+ def __init__(self, n_out, n_state=31, taps=[27, 30]):
+ self.o = Signal(n_out)
+
+ ###
+
+ state = Signal(n_state)
+ curval = [state[i] for i in range(n_state)]
+ curval += [0]*(n_out - n_state)
+ for i in range(n_out):
+ nv = ~optree("^", [curval[tap] for tap in taps])
+ curval.insert(0, nv)
+ curval.pop()
+
+ self.sync += [
+ state.eq(Cat(*curval[:n_state])),
+ self.o.eq(Cat(*curval))
+ ]
+
+memtest_magic = 0x361f
+
+
+class MemtestWriter(Module):
+ def __init__(self, lasmim):
+ self._magic = CSRStatus(16)
+ self._reset = CSR()
+ self._shoot = CSR()
+ self.submodules._dma = DMAWriteController(dma_lasmi.Writer(lasmim),
+ MODE_EXTERNAL)
+
+ ###
+
+ self.comb += self._magic.status.eq(memtest_magic)
+
+ lfsr = LFSR(lasmim.dw)
+ self.submodules += lfsr
+ self.comb += lfsr.reset.eq(self._reset.re)
+
+ en = Signal()
+ en_counter = Signal(lasmim.aw)
+ self.comb += en.eq(en_counter != 0)
+ self.sync += [
+ If(self._shoot.re,
+ en_counter.eq(self._dma.length)
+ ).Elif(lfsr.ce,
+ en_counter.eq(en_counter - 1)
+ )
+ ]
+
+ self.comb += [
+ self._dma.trigger.eq(self._shoot.re),
+ self._dma.data.stb.eq(en),
+ lfsr.ce.eq(en & self._dma.data.ack),
+ self._dma.data.d.eq(lfsr.o)
+ ]
+
+ def get_csrs(self):
+ return [self._magic, self._reset, self._shoot] + self._dma.get_csrs()
+
+
+class MemtestReader(Module):
+ def __init__(self, lasmim):
+ self._magic = CSRStatus(16)
+ self._reset = CSR()
+ self._error_count = CSRStatus(lasmim.aw)
+ self.submodules._dma = DMAReadController(dma_lasmi.Reader(lasmim),
+ MODE_SINGLE_SHOT)
+
+ ###
+
+ self.comb += self._magic.status.eq(memtest_magic)
+
+ lfsr = LFSR(lasmim.dw)
+ self.submodules += lfsr
+ self.comb += lfsr.reset.eq(self._reset.re)
+
+ self.comb += [
+ lfsr.ce.eq(self._dma.data.stb),
+ self._dma.data.ack.eq(1)
+ ]
+ err_cnt = self._error_count.status
+ self.sync += [
+ If(self._reset.re,
+ err_cnt.eq(0)
+ ).Elif(self._dma.data.stb,
+ If(self._dma.data.d != lfsr.o, err_cnt.eq(err_cnt + 1))
+ )
+ ]
+
+ def get_csrs(self):
+ return [self._magic, self._reset, self._error_count] + self._dma.get_csrs()
+
+
+class _LFSRTB(Module):
+ def __init__(self, *args, **kwargs):
+ self.submodules.dut = LFSR(*args, **kwargs)
+ self.comb += self.dut.ce.eq(1)
+
+ def do_simulation(self, selfp):
+ print("{0:032x}".format(selfp.dut.o))
+
+if __name__ == "__main__":
+ from migen.fhdl import verilog
+ from migen.sim.generic import run_simulation
+
+ lfsr = LFSR(3, 4, [3, 2])
+ print(verilog.convert(lfsr, ios={lfsr.ce, lfsr.reset, lfsr.o}))
+
+ run_simulation(_LFSRTB(128), ncycles=20)
--- /dev/null
+from migen import *
+from migen.bus.transactions import *
+from migen.bus import wishbone
+from migen.genlib.misc import timeline
+from migen.genlib.record import Record
+from migen.bank.description import AutoCSR, CSRStorage, CSRStatus
+
+_FAST_READ = 0x0b
+_DIOFR = 0xbb
+_QIOFR = 0xeb
+
+
+def _format_cmd(cmd, spi_width):
+ """
+ `cmd` is the read instruction. Since everything is transmitted on all
+ dq lines (cmd, adr and data), extend/interleave cmd to full pads.dq
+ width even if dq1-dq3 are don't care during the command phase:
+ For example, for N25Q128, 0xeb is the quad i/o fast read, and
+ extended to 4 bits (dq1,dq2,dq3 high) is: 0xfffefeff
+ """
+ c = 2**(8*spi_width)-1
+ for b in range(8):
+ if not (cmd>>b)%2:
+ c &= ~(1<<(b*spi_width))
+ return c
+
+
+class SpiFlash(Module, AutoCSR):
+ def __init__(self, pads, dummy=15, div=2, with_bitbang=True):
+ """
+ Simple SPI flash, e.g. N25Q128 on the LX9 Microboard.
+
+ Supports multi-bit pseudo-parallel reads (aka Dual or Quad I/O Fast
+ Read). Only supports mode0 (cpol=0, cpha=0).
+ Optionally supports software bitbanging (for write, erase, or other commands).
+ """
+ self.bus = bus = wishbone.Interface()
+ spi_width = flen(pads.dq)
+ if with_bitbang:
+ self.bitbang = CSRStorage(4)
+ self.miso = CSRStatus()
+ self.bitbang_en = CSRStorage()
+
+ ###
+
+ cs_n = Signal(reset=1)
+ clk = Signal()
+ dq_oe = Signal()
+ wbone_width = flen(bus.dat_r)
+
+
+ read_cmd_params = {
+ 4: (_format_cmd(_QIOFR, 4), 4*8),
+ 2: (_format_cmd(_DIOFR, 2), 2*8),
+ 1: (_format_cmd(_FAST_READ, 1), 1*8)
+ }
+ read_cmd, cmd_width = read_cmd_params[spi_width]
+ addr_width = 24
+
+ pads.cs_n.reset = 1
+
+ dq = TSTriple(spi_width)
+ self.specials.dq = dq.get_tristate(pads.dq)
+
+ sr = Signal(max(cmd_width, addr_width, wbone_width))
+ dqs = Replicate(1, spi_width-1)
+
+ self.comb += bus.dat_r.eq(sr)
+
+ hw_read_logic = [
+ pads.clk.eq(clk),
+ pads.cs_n.eq(cs_n),
+ dq.o.eq(sr[-spi_width:]),
+ dq.oe.eq(dq_oe)
+ ]
+
+ if with_bitbang:
+ bitbang_logic = [
+ pads.clk.eq(self.bitbang.storage[1]),
+ pads.cs_n.eq(self.bitbang.storage[2]),
+ dq.o.eq(Cat(self.bitbang.storage[0], dqs)),
+ If(self.bitbang.storage[3],
+ dq.oe.eq(0)
+ ).Else(
+ dq.oe.eq(1)
+ ),
+ If(self.bitbang.storage[1],
+ self.miso.status.eq(dq.i[1])
+ )
+ ]
+
+ self.comb += \
+ If(self.bitbang_en.storage,
+ bitbang_logic
+ ).Else(
+ hw_read_logic
+ )
+ else:
+ self.comb += hw_read_logic
+
+ if div < 2:
+ raise ValueError("Unsupported value \'{}\' for div parameter for SpiFlash core".format(div))
+ else:
+ i = Signal(max=div)
+ dqi = Signal(spi_width)
+ self.sync += [
+ If(i == div//2 - 1,
+ clk.eq(1),
+ dqi.eq(dq.i),
+ ),
+ If(i == div - 1,
+ i.eq(0),
+ clk.eq(0),
+ sr.eq(Cat(dqi, sr[:-spi_width]))
+ ).Else(
+ i.eq(i + 1),
+ ),
+ ]
+
+ # spi is byte-addressed, prefix by zeros
+ z = Replicate(0, log2_int(wbone_width//8))
+
+ seq = [
+ (cmd_width//spi_width*div,
+ [dq_oe.eq(1), cs_n.eq(0), sr[-cmd_width:].eq(read_cmd)]),
+ (addr_width//spi_width*div,
+ [sr[-addr_width:].eq(Cat(z, bus.adr))]),
+ ((dummy + wbone_width//spi_width)*div,
+ [dq_oe.eq(0)]),
+ (1,
+ [bus.ack.eq(1), cs_n.eq(1)]),
+ (div, # tSHSL!
+ [bus.ack.eq(0)]),
+ (0,
+ []),
+ ]
+
+ # accumulate timeline deltas
+ t, tseq = 0, []
+ for dt, a in seq:
+ tseq.append((t, a))
+ t += dt
+
+ self.sync += timeline(bus.cyc & bus.stb & (i == div - 1), tseq)
+
+
+class SpiFlashTB(Module):
+ def __init__(self):
+ self.submodules.master = wishbone.Initiator(self.gen_reads())
+ self.pads = Record([("cs_n", 1), ("clk", 1), ("dq", 4)])
+ self.submodules.slave = SpiFlash(self.pads)
+ self.submodules.tap = wishbone.Tap(self.slave.bus)
+ self.submodules.intercon = wishbone.InterconnectPointToPoint(
+ self.master.bus, self.slave.bus)
+ self.cycle = 0
+
+ def gen_reads(self):
+ for a in range(10):
+ t = TRead(a)
+ yield t
+ print("read {} in {} cycles(s)".format(t.data, t.latency))
+
+ def do_simulation(self, selfp):
+ if selfp.pads.cs_n:
+ self.cycle = 0
+ else:
+ self.cycle += 1
+ if not selfp.slave.dq.oe:
+ selfp.slave.dq.i = self.cycle & 0xf
+ do_simulation.passive = True
+
+if __name__ == "__main__":
+ from migen.sim.generic import run_simulation
+ from migen.fhdl import verilog
+
+ pads = Record([("cs_n", 1), ("clk", 1), ("dq", 4)])
+ s = SpiFlash(pads)
+ print(verilog.convert(s, ios={pads.clk, pads.cs_n, pads.dq, s.bus.adr,
+ s.bus.dat_r, s.bus.cyc, s.bus.ack, s.bus.stb}))
+
+ run_simulation(SpiFlashTB(), vcd_name="spiflash.vcd")
+++ /dev/null
-from migen import *
-from migen.bus.transactions import *
-from migen.bus import wishbone
-from migen.genlib.misc import timeline
-from migen.genlib.record import Record
-from migen.bank.description import AutoCSR, CSRStorage, CSRStatus
-
-_FAST_READ = 0x0b
-_DIOFR = 0xbb
-_QIOFR = 0xeb
-
-
-def _format_cmd(cmd, spi_width):
- """
- `cmd` is the read instruction. Since everything is transmitted on all
- dq lines (cmd, adr and data), extend/interleave cmd to full pads.dq
- width even if dq1-dq3 are don't care during the command phase:
- For example, for N25Q128, 0xeb is the quad i/o fast read, and
- extended to 4 bits (dq1,dq2,dq3 high) is: 0xfffefeff
- """
- c = 2**(8*spi_width)-1
- for b in range(8):
- if not (cmd>>b)%2:
- c &= ~(1<<(b*spi_width))
- return c
-
-
-class SpiFlash(Module, AutoCSR):
- def __init__(self, pads, dummy=15, div=2, with_bitbang=True):
- """
- Simple SPI flash, e.g. N25Q128 on the LX9 Microboard.
-
- Supports multi-bit pseudo-parallel reads (aka Dual or Quad I/O Fast
- Read). Only supports mode0 (cpol=0, cpha=0).
- Optionally supports software bitbanging (for write, erase, or other commands).
- """
- self.bus = bus = wishbone.Interface()
- spi_width = flen(pads.dq)
- if with_bitbang:
- self.bitbang = CSRStorage(4)
- self.miso = CSRStatus()
- self.bitbang_en = CSRStorage()
-
- ###
-
- cs_n = Signal(reset=1)
- clk = Signal()
- dq_oe = Signal()
- wbone_width = flen(bus.dat_r)
-
-
- read_cmd_params = {
- 4: (_format_cmd(_QIOFR, 4), 4*8),
- 2: (_format_cmd(_DIOFR, 2), 2*8),
- 1: (_format_cmd(_FAST_READ, 1), 1*8)
- }
- read_cmd, cmd_width = read_cmd_params[spi_width]
- addr_width = 24
-
- pads.cs_n.reset = 1
-
- dq = TSTriple(spi_width)
- self.specials.dq = dq.get_tristate(pads.dq)
-
- sr = Signal(max(cmd_width, addr_width, wbone_width))
- dqs = Replicate(1, spi_width-1)
-
- self.comb += bus.dat_r.eq(sr)
-
- hw_read_logic = [
- pads.clk.eq(clk),
- pads.cs_n.eq(cs_n),
- dq.o.eq(sr[-spi_width:]),
- dq.oe.eq(dq_oe)
- ]
-
- if with_bitbang:
- bitbang_logic = [
- pads.clk.eq(self.bitbang.storage[1]),
- pads.cs_n.eq(self.bitbang.storage[2]),
- dq.o.eq(Cat(self.bitbang.storage[0], dqs)),
- If(self.bitbang.storage[3],
- dq.oe.eq(0)
- ).Else(
- dq.oe.eq(1)
- ),
- If(self.bitbang.storage[1],
- self.miso.status.eq(dq.i[1])
- )
- ]
-
- self.comb += \
- If(self.bitbang_en.storage,
- bitbang_logic
- ).Else(
- hw_read_logic
- )
- else:
- self.comb += hw_read_logic
-
- if div < 2:
- raise ValueError("Unsupported value \'{}\' for div parameter for SpiFlash core".format(div))
- else:
- i = Signal(max=div)
- dqi = Signal(spi_width)
- self.sync += [
- If(i == div//2 - 1,
- clk.eq(1),
- dqi.eq(dq.i),
- ),
- If(i == div - 1,
- i.eq(0),
- clk.eq(0),
- sr.eq(Cat(dqi, sr[:-spi_width]))
- ).Else(
- i.eq(i + 1),
- ),
- ]
-
- # spi is byte-addressed, prefix by zeros
- z = Replicate(0, log2_int(wbone_width//8))
-
- seq = [
- (cmd_width//spi_width*div,
- [dq_oe.eq(1), cs_n.eq(0), sr[-cmd_width:].eq(read_cmd)]),
- (addr_width//spi_width*div,
- [sr[-addr_width:].eq(Cat(z, bus.adr))]),
- ((dummy + wbone_width//spi_width)*div,
- [dq_oe.eq(0)]),
- (1,
- [bus.ack.eq(1), cs_n.eq(1)]),
- (div, # tSHSL!
- [bus.ack.eq(0)]),
- (0,
- []),
- ]
-
- # accumulate timeline deltas
- t, tseq = 0, []
- for dt, a in seq:
- tseq.append((t, a))
- t += dt
-
- self.sync += timeline(bus.cyc & bus.stb & (i == div - 1), tseq)
-
-
-class SpiFlashTB(Module):
- def __init__(self):
- self.submodules.master = wishbone.Initiator(self.gen_reads())
- self.pads = Record([("cs_n", 1), ("clk", 1), ("dq", 4)])
- self.submodules.slave = SpiFlash(self.pads)
- self.submodules.tap = wishbone.Tap(self.slave.bus)
- self.submodules.intercon = wishbone.InterconnectPointToPoint(
- self.master.bus, self.slave.bus)
- self.cycle = 0
-
- def gen_reads(self):
- for a in range(10):
- t = TRead(a)
- yield t
- print("read {} in {} cycles(s)".format(t.data, t.latency))
-
- def do_simulation(self, selfp):
- if selfp.pads.cs_n:
- self.cycle = 0
- else:
- self.cycle += 1
- if not selfp.slave.dq.oe:
- selfp.slave.dq.i = self.cycle & 0xf
- do_simulation.passive = True
-
-if __name__ == "__main__":
- from migen.sim.generic import run_simulation
- from migen.fhdl import verilog
-
- pads = Record([("cs_n", 1), ("clk", 1), ("dq", 4)])
- s = SpiFlash(pads)
- print(verilog.convert(s, ios={pads.clk, pads.cs_n, pads.dq, s.bus.adr,
- s.bus.dat_r, s.bus.cyc, s.bus.ack, s.bus.stb}))
-
- run_simulation(SpiFlashTB(), vcd_name="spiflash.vcd")
--- /dev/null
+from migen import *
+from migen.bank.description import CSRStatus
+
+
+def get_cpu_mak(cpu_type):
+ if cpu_type == "lm32":
+ triple = "lm32-elf"
+ cpuflags = "-mbarrel-shift-enabled -mmultiply-enabled -mdivide-enabled -msign-extend-enabled"
+ clang = ""
+ elif cpu_type == "or1k":
+ triple = "or1k-linux"
+ cpuflags = "-mhard-mul -mhard-div -mror -mffl1 -maddc"
+ clang = "1"
+ else:
+ raise ValueError("Unsupported CPU type: "+cpu_type)
+ return "TRIPLE={}\nCPU={}\nCPUFLAGS={}\nCLANG={}".format(triple, cpu_type, cpuflags, clang)
+
+
+def get_linker_output_format(cpu_type):
+ return "OUTPUT_FORMAT(\"elf32-{}\")\n".format(cpu_type)
+
+
+def get_linker_regions(regions):
+ r = "MEMORY {\n"
+ for name, origin, length in regions:
+ r += "\t{} : ORIGIN = 0x{:08x}, LENGTH = 0x{:08x}\n".format(name, origin, length)
+ r += "}\n"
+ return r
+
+
+def get_mem_header(regions, flash_boot_address):
+ r = "#ifndef __GENERATED_MEM_H\n#define __GENERATED_MEM_H\n\n"
+ for name, base, size in regions:
+ r += "#define {name}_BASE 0x{base:08x}\n#define {name}_SIZE 0x{size:08x}\n\n".format(name=name.upper(), base=base, size=size)
+ if flash_boot_address is not None:
+ r += "#define FLASH_BOOT_ADDRESS 0x{:08x}\n\n".format(flash_boot_address)
+ r += "#endif\n"
+ return r
+
+
+def _get_rw_functions(reg_name, reg_base, nwords, busword, read_only, with_access_functions):
+ r = ""
+
+ r += "#define CSR_"+reg_name.upper()+"_ADDR "+hex(reg_base)+"\n"
+ r += "#define CSR_"+reg_name.upper()+"_SIZE "+str(nwords)+"\n"
+
+ size = nwords*busword
+ if size > 64:
+ return r
+ elif size > 32:
+ ctype = "unsigned long long int"
+ elif size > 16:
+ ctype = "unsigned int"
+ elif size > 8:
+ ctype = "unsigned short int"
+ else:
+ ctype = "unsigned char"
+
+ if with_access_functions:
+ r += "static inline "+ctype+" "+reg_name+"_read(void) {\n"
+ if size > 1:
+ r += "\t"+ctype+" r = MMPTR("+hex(reg_base)+");\n"
+ for byte in range(1, nwords):
+ r += "\tr <<= "+str(busword)+";\n\tr |= MMPTR("+hex(reg_base+4*byte)+");\n"
+ r += "\treturn r;\n}\n"
+ else:
+ r += "\treturn MMPTR("+hex(reg_base)+");\n}\n"
+
+ if not read_only:
+ r += "static inline void "+reg_name+"_write("+ctype+" value) {\n"
+ for word in range(nwords):
+ shift = (nwords-word-1)*busword
+ if shift:
+ value_shifted = "value >> "+str(shift)
+ else:
+ value_shifted = "value"
+ r += "\tMMPTR("+hex(reg_base+4*word)+") = "+value_shifted+";\n"
+ r += "}\n"
+ return r
+
+
+def get_csr_header(regions, constants, with_access_functions=True):
+ r = "#ifndef __GENERATED_CSR_H\n#define __GENERATED_CSR_H\n"
+ if with_access_functions:
+ r += "#include <hw/common.h>\n"
+ for name, origin, busword, obj in regions:
+ if isinstance(obj, Memory):
+ r += "#define CSR_"+name.upper()+"_BASE "+hex(origin)+"\n"
+ else:
+ r += "\n/* "+name+" */\n"
+ r += "#define CSR_"+name.upper()+"_BASE "+hex(origin)+"\n"
+ for csr in obj:
+ nr = (csr.size + busword - 1)//busword
+ r += _get_rw_functions(name + "_" + csr.name, origin, nr, busword, isinstance(csr, CSRStatus), with_access_functions)
+ origin += 4*nr
+
+ r += "\n/* constants */\n"
+ for name, value in constants:
+ r += "#define " + name
+ if value is not None:
+ if isinstance(value, str):
+ r += " \"" + value + "\""
+ else:
+ r += " " + str(value)
+ r += "\n"
+
+ r += "\n#endif\n"
+ return r
+
+
+def get_csr_csv(regions):
+ r = ""
+ for name, origin, busword, obj in regions:
+ if not isinstance(obj, Memory):
+ for csr in obj:
+ nr = (csr.size + busword - 1)//busword
+ r += "{}_{},0x{:08x},{},{}\n".format(name, csr.name, origin, nr, "ro" if isinstance(csr, CSRStatus) else "rw")
+ origin += 4*nr
+ return r
+++ /dev/null
-from migen import *
-from migen.bank.description import CSRStatus
-
-
-def get_cpu_mak(cpu_type):
- if cpu_type == "lm32":
- triple = "lm32-elf"
- cpuflags = "-mbarrel-shift-enabled -mmultiply-enabled -mdivide-enabled -msign-extend-enabled"
- clang = ""
- elif cpu_type == "or1k":
- triple = "or1k-linux"
- cpuflags = "-mhard-mul -mhard-div -mror -mffl1 -maddc"
- clang = "1"
- else:
- raise ValueError("Unsupported CPU type: "+cpu_type)
- return "TRIPLE={}\nCPU={}\nCPUFLAGS={}\nCLANG={}".format(triple, cpu_type, cpuflags, clang)
-
-
-def get_linker_output_format(cpu_type):
- return "OUTPUT_FORMAT(\"elf32-{}\")\n".format(cpu_type)
-
-
-def get_linker_regions(regions):
- r = "MEMORY {\n"
- for name, origin, length in regions:
- r += "\t{} : ORIGIN = 0x{:08x}, LENGTH = 0x{:08x}\n".format(name, origin, length)
- r += "}\n"
- return r
-
-
-def get_mem_header(regions, flash_boot_address):
- r = "#ifndef __GENERATED_MEM_H\n#define __GENERATED_MEM_H\n\n"
- for name, base, size in regions:
- r += "#define {name}_BASE 0x{base:08x}\n#define {name}_SIZE 0x{size:08x}\n\n".format(name=name.upper(), base=base, size=size)
- if flash_boot_address is not None:
- r += "#define FLASH_BOOT_ADDRESS 0x{:08x}\n\n".format(flash_boot_address)
- r += "#endif\n"
- return r
-
-
-def _get_rw_functions(reg_name, reg_base, nwords, busword, read_only, with_access_functions):
- r = ""
-
- r += "#define CSR_"+reg_name.upper()+"_ADDR "+hex(reg_base)+"\n"
- r += "#define CSR_"+reg_name.upper()+"_SIZE "+str(nwords)+"\n"
-
- size = nwords*busword
- if size > 64:
- return r
- elif size > 32:
- ctype = "unsigned long long int"
- elif size > 16:
- ctype = "unsigned int"
- elif size > 8:
- ctype = "unsigned short int"
- else:
- ctype = "unsigned char"
-
- if with_access_functions:
- r += "static inline "+ctype+" "+reg_name+"_read(void) {\n"
- if size > 1:
- r += "\t"+ctype+" r = MMPTR("+hex(reg_base)+");\n"
- for byte in range(1, nwords):
- r += "\tr <<= "+str(busword)+";\n\tr |= MMPTR("+hex(reg_base+4*byte)+");\n"
- r += "\treturn r;\n}\n"
- else:
- r += "\treturn MMPTR("+hex(reg_base)+");\n}\n"
-
- if not read_only:
- r += "static inline void "+reg_name+"_write("+ctype+" value) {\n"
- for word in range(nwords):
- shift = (nwords-word-1)*busword
- if shift:
- value_shifted = "value >> "+str(shift)
- else:
- value_shifted = "value"
- r += "\tMMPTR("+hex(reg_base+4*word)+") = "+value_shifted+";\n"
- r += "}\n"
- return r
-
-
-def get_csr_header(regions, constants, with_access_functions=True):
- r = "#ifndef __GENERATED_CSR_H\n#define __GENERATED_CSR_H\n"
- if with_access_functions:
- r += "#include <hw/common.h>\n"
- for name, origin, busword, obj in regions:
- if isinstance(obj, Memory):
- r += "#define CSR_"+name.upper()+"_BASE "+hex(origin)+"\n"
- else:
- r += "\n/* "+name+" */\n"
- r += "#define CSR_"+name.upper()+"_BASE "+hex(origin)+"\n"
- for csr in obj:
- nr = (csr.size + busword - 1)//busword
- r += _get_rw_functions(name + "_" + csr.name, origin, nr, busword, isinstance(csr, CSRStatus), with_access_functions)
- origin += 4*nr
-
- r += "\n/* constants */\n"
- for name, value in constants:
- r += "#define " + name
- if value is not None:
- if isinstance(value, str):
- r += " \"" + value + "\""
- else:
- r += " " + str(value)
- r += "\n"
-
- r += "\n#endif\n"
- return r
-
-
-def get_csr_csv(regions):
- r = ""
- for name, origin, busword, obj in regions:
- if not isinstance(obj, Memory):
- for csr in obj:
- nr = (csr.size + busword - 1)//busword
- r += "{}_{},0x{:08x},{},{}\n".format(name, csr.name, origin, nr, "ro" if isinstance(csr, CSRStatus) else "rw")
- origin += 4*nr
- return r
--- /dev/null
+from migen import log2_int
+
+
+def get_sdram_phy_header(sdram_phy_settings):
+ r = "#ifndef __GENERATED_SDRAM_PHY_H\n#define __GENERATED_SDRAM_PHY_H\n"
+ r += "#include <hw/common.h>\n#include <generated/csr.h>\n#include <hw/flags.h>\n\n"
+
+ nphases = sdram_phy_settings.nphases
+ r += "#define DFII_NPHASES "+str(nphases)+"\n\n"
+
+ r += "static void cdelay(int i);\n"
+
+ # commands_px functions
+ for n in range(nphases):
+ r += """
+static void command_p{n}(int cmd)
+{{
+ sdram_dfii_pi{n}_command_write(cmd);
+ sdram_dfii_pi{n}_command_issue_write(1);
+}}""".format(n=str(n))
+ r += "\n\n"
+
+ # rd/wr access macros
+ r += """
+#define sdram_dfii_pird_address_write(X) sdram_dfii_pi{rdphase}_address_write(X)
+#define sdram_dfii_piwr_address_write(X) sdram_dfii_pi{wrphase}_address_write(X)
+
+#define sdram_dfii_pird_baddress_write(X) sdram_dfii_pi{rdphase}_baddress_write(X)
+#define sdram_dfii_piwr_baddress_write(X) sdram_dfii_pi{wrphase}_baddress_write(X)
+
+#define command_prd(X) command_p{rdphase}(X)
+#define command_pwr(X) command_p{wrphase}(X)
+""".format(rdphase=str(sdram_phy_settings.rdphase), wrphase=str(sdram_phy_settings.wrphase))
+ r += "\n"
+
+ #
+ # sdrrd/sdrwr functions utilities
+ #
+ r += "#define DFII_PIX_DATA_SIZE CSR_SDRAM_DFII_PI0_WRDATA_SIZE\n"
+ sdram_dfii_pix_wrdata_addr = []
+ for n in range(nphases):
+ sdram_dfii_pix_wrdata_addr.append("CSR_SDRAM_DFII_PI{n}_WRDATA_ADDR".format(n=n))
+ r += """
+const unsigned int sdram_dfii_pix_wrdata_addr[{n}] = {{
+ {sdram_dfii_pix_wrdata_addr}
+}};
+""".format(n=nphases, sdram_dfii_pix_wrdata_addr=",\n\t".join(sdram_dfii_pix_wrdata_addr))
+
+ sdram_dfii_pix_rddata_addr = []
+ for n in range(nphases):
+ sdram_dfii_pix_rddata_addr.append("CSR_SDRAM_DFII_PI{n}_RDDATA_ADDR".format(n=n))
+ r += """
+const unsigned int sdram_dfii_pix_rddata_addr[{n}] = {{
+ {sdram_dfii_pix_rddata_addr}
+}};
+""".format(n=nphases, sdram_dfii_pix_rddata_addr=",\n\t".join(sdram_dfii_pix_rddata_addr))
+ r += "\n"
+
+ # init sequence
+ cmds = {
+ "PRECHARGE_ALL": "DFII_COMMAND_RAS|DFII_COMMAND_WE|DFII_COMMAND_CS",
+ "MODE_REGISTER": "DFII_COMMAND_RAS|DFII_COMMAND_CAS|DFII_COMMAND_WE|DFII_COMMAND_CS",
+ "AUTO_REFRESH": "DFII_COMMAND_RAS|DFII_COMMAND_CAS|DFII_COMMAND_CS",
+ "UNRESET": "DFII_CONTROL_ODT|DFII_CONTROL_RESET_N",
+ "CKE": "DFII_CONTROL_CKE|DFII_CONTROL_ODT|DFII_CONTROL_RESET_N"
+ }
+
+ cl = sdram_phy_settings.cl
+
+ if sdram_phy_settings.memtype == "SDR":
+ bl = sdram_phy_settings.nphases
+ mr = log2_int(bl) + (cl << 4)
+ reset_dll = 1 << 8
+
+ init_sequence = [
+ ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200)
+ ]
+
+ elif sdram_phy_settings.memtype == "DDR":
+ bl = 2*sdram_phy_settings.nphases
+ mr = log2_int(bl) + (cl << 4)
+ emr = 0
+ reset_dll = 1 << 8
+
+ init_sequence = [
+ ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Load Extended Mode Register", emr, 1, cmds["MODE_REGISTER"], 0),
+ ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200)
+ ]
+
+ elif sdram_phy_settings.memtype == "LPDDR":
+ bl = 2*sdram_phy_settings.nphases
+ mr = log2_int(bl) + (cl << 4)
+ emr = 0
+ reset_dll = 1 << 8
+
+ init_sequence = [
+ ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Load Extended Mode Register", emr, 2, cmds["MODE_REGISTER"], 0),
+ ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200)
+ ]
+
+ elif sdram_phy_settings.memtype == "DDR2":
+ bl = 2*sdram_phy_settings.nphases
+ wr = 2
+ mr = log2_int(bl) + (cl << 4) + (wr << 9)
+ emr = 0
+ emr2 = 0
+ emr3 = 0
+ reset_dll = 1 << 8
+ ocd = 7 << 7
+
+ init_sequence = [
+ ("Bring CKE high", 0x0000, 0, cmds["CKE"], 20000),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Load Extended Mode Register 3", emr3, 3, cmds["MODE_REGISTER"], 0),
+ ("Load Extended Mode Register 2", emr2, 2, cmds["MODE_REGISTER"], 0),
+ ("Load Extended Mode Register", emr, 1, cmds["MODE_REGISTER"], 0),
+ ("Load Mode Register / Reset DLL, CL={0:d}, BL={1:d}".format(cl, bl), mr + reset_dll, 0, cmds["MODE_REGISTER"], 200),
+ ("Precharge All", 0x0400, 0, cmds["PRECHARGE_ALL"], 0),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Auto Refresh", 0x0, 0, cmds["AUTO_REFRESH"], 4),
+ ("Load Mode Register / CL={0:d}, BL={1:d}".format(cl, bl), mr, 0, cmds["MODE_REGISTER"], 200),
+ ("Load Extended Mode Register / OCD Default", emr+ocd, 1, cmds["MODE_REGISTER"], 0),
+ ("Load Extended Mode Register / OCD Exit", emr, 1, cmds["MODE_REGISTER"], 0),
+ ]
+ elif sdram_phy_settings.memtype == "DDR3":
+ bl = 2*sdram_phy_settings.nphases
+
+ def format_mr0(bl, cl, wr, dll_reset):
+ bl_to_mr0 = {
+ 4: 0b10,
+ 8: 0b00
+ }
+ cl_to_mr0 = {
+ 5: 0b0010,
+ 6: 0b0100,
+ 7: 0b0110,
+ 8: 0b1000,
+ 9: 0b1010,
+ 10: 0b1100,
+ 11: 0b1110,
+ 12: 0b0001,
+ 13: 0b0011,
+ 14: 0b0101
+ }
+ wr_to_mr0 = {
+ 16: 0b000,
+ 5: 0b001,
+ 6: 0b010,
+ 7: 0b011,
+ 8: 0b100,
+ 10: 0b101,
+ 12: 0b110,
+ 14: 0b111
+ }
+ mr0 = bl_to_mr0[bl]
+ mr0 |= (cl_to_mr0[cl] & 1) << 2
+ mr0 |= ((cl_to_mr0[cl] >> 1) & 0b111) << 4
+ mr0 |= dll_reset << 8
+ mr0 |= wr_to_mr0[wr] << 9
+ return mr0
+
+ def format_mr1(output_drive_strength, rtt_nom):
+ mr1 = ((output_drive_strength >> 0) & 1) << 1
+ mr1 |= ((output_drive_strength >> 1) & 1) << 5
+ mr1 |= ((rtt_nom >> 0) & 1) << 2
+ mr1 |= ((rtt_nom >> 1) & 1) << 6
+ mr1 |= ((rtt_nom >> 2) & 1) << 9
+ return mr1
+
+ def format_mr2(cwl, rtt_wr):
+ mr2 = (cwl-5) << 3
+ mr2 |= rtt_wr << 9
+ return mr2
+
+ mr0 = format_mr0(bl, cl, 8, 1) # wr=8 FIXME: this should be ceiling(tWR/tCK)
+ mr1 = format_mr1(1, 1) # Output Drive Strength RZQ/7 (34 ohm) / Rtt RZQ/4 (60 ohm)
+ mr2 = format_mr2(sdram_phy_settings.cwl, 2) # Rtt(WR) RZQ/4
+ mr3 = 0
+
+ init_sequence = [
+ ("Release reset", 0x0000, 0, cmds["UNRESET"], 50000),
+ ("Bring CKE high", 0x0000, 0, cmds["CKE"], 10000),
+ ("Load Mode Register 2", mr2, 2, cmds["MODE_REGISTER"], 0),
+ ("Load Mode Register 3", mr3, 3, cmds["MODE_REGISTER"], 0),
+ ("Load Mode Register 1", mr1, 1, cmds["MODE_REGISTER"], 0),
+ ("Load Mode Register 0, CL={0:d}, BL={1:d}".format(cl, bl), mr0, 0, cmds["MODE_REGISTER"], 200),
+ ("ZQ Calibration", 0x0400, 0, "DFII_COMMAND_WE|DFII_COMMAND_CS", 200),
+ ]
+
+ # the value of MR1 needs to be modified during write leveling
+ r += "#define DDR3_MR1 {}\n\n".format(mr1)
+ else:
+ raise NotImplementedError("Unsupported memory type: "+sdram_phy_settings.memtype)
+
+ r += "static void init_sequence(void)\n{\n"
+ for comment, a, ba, cmd, delay in init_sequence:
+ r += "\t/* {0} */\n".format(comment)
+ r += "\tsdram_dfii_pi0_address_write({0:#x});\n".format(a)
+ r += "\tsdram_dfii_pi0_baddress_write({0:d});\n".format(ba)
+ if cmd[:12] == "DFII_CONTROL":
+ r += "\tsdram_dfii_control_write({0});\n".format(cmd)
+ else:
+ r += "\tcommand_p0({0});\n".format(cmd)
+ if delay:
+ r += "\tcdelay({0:d});\n".format(delay)
+ r += "\n"
+ r += "}\n"
+
+ r += "#endif\n"
+
+ return r
from migen.bus import wishbone
from migen.genlib.record import *
-from misoc.mem.sdram.core import SDRAMCore
from misoc.mem.sdram.core.lasmicon import LASMIconSettings
from misoc.mem.sdram.core.minicon import MiniconSettings
from misoc.mem.sdram.frontend import memtest, wishbone2lasmi
from misoc.integration.soc_core import SoCCore
+class SDRAMCore(Module, AutoCSR):
+ def __init__(self, phy, geom_settings, timing_settings, controller_settings, **kwargs):
+ # DFI
+ self.submodules.dfii = dfii.DFIInjector(geom_settings.addressbits, geom_settings.bankbits,
+ phy.settings.dfi_databits, phy.settings.nphases)
+ self.comb += Record.connect(self.dfii.master, phy.dfi)
+
+ # LASMICON
+ if isinstance(controller_settings, lasmicon.LASMIconSettings):
+ self.submodules.controller = controller = lasmicon.LASMIcon(phy.settings,
+ geom_settings,
+ timing_settings,
+ controller_settings,
+ **kwargs)
+ self.comb += Record.connect(controller.dfi, self.dfii.slave)
+
+ self.submodules.crossbar = lasmixbar.LASMIxbar([controller.lasmic],
+ controller.nrowbits)
+
+ # MINICON
+ elif isinstance(controller_settings, minicon.MiniconSettings):
+ self.submodules.controller = controller = minicon.Minicon(phy.settings,
+ geom_settings,
+ timing_settings)
+ self.comb += Record.connect(controller.dfi, self.dfii.slave)
+ else:
+ raise ValueError("Unsupported SDRAM controller type")
+
+
class SoCSDRAM(SoCCore):
csr_map = {
"sdram": 8,
--- /dev/null
+from migen import *
+from migen.genlib.record import *
+
+
+def phase_cmd_description(addressbits, bankbits):
+ return [
+ ("address", addressbits, DIR_M_TO_S),
+ ("bank", bankbits, DIR_M_TO_S),
+ ("cas_n", 1, DIR_M_TO_S),
+ ("cs_n", 1, DIR_M_TO_S),
+ ("ras_n", 1, DIR_M_TO_S),
+ ("we_n", 1, DIR_M_TO_S),
+ ("cke", 1, DIR_M_TO_S),
+ ("odt", 1, DIR_M_TO_S),
+ ("reset_n", 1, DIR_M_TO_S)
+ ]
+
+
+def phase_wrdata_description(databits):
+ return [
+ ("wrdata", databits, DIR_M_TO_S),
+ ("wrdata_en", 1, DIR_M_TO_S),
+ ("wrdata_mask", databits//8, DIR_M_TO_S)
+ ]
+
+
+def phase_rddata_description(databits):
+ return [
+ ("rddata_en", 1, DIR_M_TO_S),
+ ("rddata", databits, DIR_S_TO_M),
+ ("rddata_valid", 1, DIR_S_TO_M)
+ ]
+
+
+def phase_description(addressbits, bankbits, databits):
+ r = phase_cmd_description(addressbits, bankbits)
+ r += phase_wrdata_description(databits)
+ r += phase_rddata_description(databits)
+ return r
+
+
+class Interface(Record):
+ def __init__(self, addressbits, bankbits, databits, nphases=1):
+ layout = [("p"+str(i), phase_description(addressbits, bankbits, databits)) for i in range(nphases)]
+ Record.__init__(self, layout)
+ self.phases = [getattr(self, "p"+str(i)) for i in range(nphases)]
+ for p in self.phases:
+ p.cas_n.reset = 1
+ p.cs_n.reset = 1
+ p.ras_n.reset = 1
+ p.we_n.reset = 1
+
+ # Returns pairs (DFI-mandated signal name, Migen signal object)
+ def get_standard_names(self, m2s=True, s2m=True):
+ r = []
+ add_suffix = len(self.phases) > 1
+ for n, phase in enumerate(self.phases):
+ for field, size, direction in phase.layout:
+ if (m2s and direction == DIR_M_TO_S) or (s2m and direction == DIR_S_TO_M):
+ if add_suffix:
+ if direction == DIR_M_TO_S:
+ suffix = "_p" + str(n)
+ else:
+ suffix = "_w" + str(n)
+ else:
+ suffix = ""
+ r.append(("dfi_" + field + suffix, getattr(phase, field)))
+ return r
+
+
+class Interconnect(Module):
+ def __init__(self, master, slave):
+ self.comb += master.connect(slave)
--- /dev/null
+from migen import *
+from migen.flow.actor import *
+from migen.genlib.fifo import SyncFIFO
+
+
+class Reader(Module):
+ def __init__(self, lasmim, fifo_depth=None):
+ self.address = Sink([("a", lasmim.aw)])
+ self.data = Source([("d", lasmim.dw)])
+ self.busy = Signal()
+
+ ###
+
+ if fifo_depth is None:
+ fifo_depth = lasmim.req_queue_size + lasmim.read_latency + 2
+
+ # request issuance
+ request_enable = Signal()
+ request_issued = Signal()
+
+ self.comb += [
+ lasmim.we.eq(0),
+ lasmim.stb.eq(self.address.stb & request_enable),
+ lasmim.adr.eq(self.address.a),
+ self.address.ack.eq(lasmim.req_ack & request_enable),
+ request_issued.eq(lasmim.stb & lasmim.req_ack)
+ ]
+
+ # FIFO reservation level counter
+ # incremented when data is planned to be queued
+ # decremented when data is dequeued
+ data_dequeued = Signal()
+ rsv_level = Signal(max=fifo_depth+1)
+ self.sync += [
+ If(request_issued,
+ If(~data_dequeued, rsv_level.eq(rsv_level + 1))
+ ).Elif(data_dequeued,
+ rsv_level.eq(rsv_level - 1)
+ )
+ ]
+ self.comb += [
+ self.busy.eq(rsv_level != 0),
+ request_enable.eq(rsv_level != fifo_depth)
+ ]
+
+ # FIFO
+ fifo = SyncFIFO(lasmim.dw, fifo_depth)
+ self.submodules += fifo
+
+ self.comb += [
+ fifo.din.eq(lasmim.dat_r),
+ fifo.we.eq(lasmim.dat_r_ack),
+
+ self.data.stb.eq(fifo.readable),
+ fifo.re.eq(self.data.ack),
+ self.data.d.eq(fifo.dout),
+ data_dequeued.eq(self.data.stb & self.data.ack)
+ ]
+
+
+class Writer(Module):
+ def __init__(self, lasmim, fifo_depth=None):
+ self.address_data = Sink([("a", lasmim.aw), ("d", lasmim.dw)])
+ self.busy = Signal()
+
+ ###
+
+ if fifo_depth is None:
+ fifo_depth = lasmim.req_queue_size + lasmim.write_latency + 2
+
+ fifo = SyncFIFO(lasmim.dw, fifo_depth)
+ self.submodules += fifo
+
+ self.comb += [
+ lasmim.we.eq(1),
+ lasmim.stb.eq(fifo.writable & self.address_data.stb),
+ lasmim.adr.eq(self.address_data.a),
+ self.address_data.ack.eq(fifo.writable & lasmim.req_ack),
+ fifo.we.eq(self.address_data.stb & lasmim.req_ack),
+ fifo.din.eq(self.address_data.d)
+ ]
+
+ self.comb += [
+ If(lasmim.dat_w_ack,
+ fifo.re.eq(1),
+ lasmim.dat_we.eq(2**(lasmim.dw//8)-1),
+ lasmim.dat_w.eq(fifo.dout)
+ ),
+ self.busy.eq(fifo.readable)
+ ]
--- /dev/null
+from migen import *
+from migen.bus.transactions import *
+from migen.genlib import roundrobin
+from migen.genlib.record import *
+from migen.genlib.misc import optree
+
+
+class Interface(Record):
+ def __init__(self, aw, dw, nbanks, req_queue_size, read_latency, write_latency):
+ self.aw = aw
+ self.dw = dw
+ self.nbanks = nbanks
+ self.req_queue_size = req_queue_size
+ self.read_latency = read_latency
+ self.write_latency = write_latency
+
+ bank_layout = [
+ ("adr", aw, DIR_M_TO_S),
+ ("we", 1, DIR_M_TO_S),
+ ("stb", 1, DIR_M_TO_S),
+ ("req_ack", 1, DIR_S_TO_M),
+ ("dat_w_ack", 1, DIR_S_TO_M),
+ ("dat_r_ack", 1, DIR_S_TO_M),
+ ("lock", 1, DIR_S_TO_M)
+ ]
+ if nbanks > 1:
+ layout = [("bank"+str(i), bank_layout) for i in range(nbanks)]
+ else:
+ layout = bank_layout
+ layout += [
+ ("dat_w", dw, DIR_M_TO_S),
+ ("dat_we", dw//8, DIR_M_TO_S),
+ ("dat_r", dw, DIR_S_TO_M)
+ ]
+ Record.__init__(self, layout)
+
+
+class Initiator(Module):
+ def __init__(self, generator, bus):
+ self.generator = generator
+ self.bus = bus
+ self.transaction_start = 0
+ self.transaction = None
+ self.transaction_end = None
+
+ def do_simulation(self, selfp):
+ selfp.bus.dat_w = 0
+ selfp.bus.dat_we = 0
+
+ if self.transaction is not None:
+ if selfp.bus.req_ack:
+ selfp.bus.stb = 0
+ if selfp.bus.dat_ack:
+ if isinstance(self.transaction, TRead):
+ self.transaction_end = selfp.simulator.cycle_counter + self.bus.read_latency
+ else:
+ self.transaction_end = selfp.simulator.cycle_counter + self.bus.write_latency - 1
+
+ if self.transaction is None or selfp.simulator.cycle_counter == self.transaction_end:
+ if self.transaction is not None:
+ self.transaction.latency = selfp.simulator.cycle_counter - self.transaction_start - 1
+ if isinstance(self.transaction, TRead):
+ self.transaction.data = selfp.bus.dat_r
+ else:
+ selfp.bus.dat_w = self.transaction.data
+ selfp.bus.dat_we = self.transaction.sel
+ try:
+ self.transaction = next(self.generator)
+ except StopIteration:
+ raise StopSimulation
+ if self.transaction is not None:
+ self.transaction_start = selfp.simulator.cycle_counter
+ selfp.bus.stb = 1
+ selfp.bus.adr = self.transaction.address
+ if isinstance(self.transaction, TRead):
+ selfp.bus.we = 0
+ else:
+ selfp.bus.we = 1
+
+
+class TargetModel:
+ def __init__(self):
+ self.last_bank = 0
+
+ def read(self, bank, address):
+ return 0
+
+ def write(self, bank, address, data, we):
+ pass
+
+ # Round-robin scheduling
+ def select_bank(self, pending_banks):
+ if not pending_banks:
+ return -1
+ self.last_bank += 1
+ if self.last_bank > max(pending_banks):
+ self.last_bank = 0
+ while self.last_bank not in pending_banks:
+ self.last_bank += 1
+ return self.last_bank
+
+
+class _ReqFIFO(Module):
+ def __init__(self, req_queue_size, bank):
+ self.req_queue_size = req_queue_size
+ self.bank = bank
+ self.contents = []
+
+ def do_simulation(self, selfp):
+ if len(self.contents) < self.req_queue_size:
+ if selfp.bank.stb:
+ self.contents.append((selfp.bank.we, selfp.bank.adr))
+ selfp.bank.req_ack = 1
+ else:
+ selfp.bank.req_ack = 0
+ selfp.bank.lock = bool(self.contents)
+ do_simulation.passive = True
+
+
+class Target(Module):
+ def __init__(self, model, *ifargs, **ifkwargs):
+ self.model = model
+ self.bus = Interface(*ifargs, **ifkwargs)
+ self.req_fifos = [_ReqFIFO(self.bus.req_queue_size, getattr(self.bus, "bank"+str(nb)))
+ for nb in range(self.bus.nbanks)]
+ self.submodules += self.req_fifos
+ self.rd_pipeline = [None]*self.bus.read_latency
+ self.wr_pipeline = [None]*(self.bus.write_latency + 1)
+
+ def do_simulation(self, selfp):
+ # determine banks with pending requests
+ pending_banks = set(nb for nb, rf in enumerate(self.req_fifos) if rf.contents)
+
+ # issue new transactions
+ selected_bank_n = self.model.select_bank(pending_banks)
+ selected_transaction = None
+ for nb in range(self.bus.nbanks):
+ bank = getattr(selfp.bus, "bank"+str(nb))
+ if nb == selected_bank_n:
+ bank.dat_ack = 1
+ selected_transaction = self.req_fifos[nb].contents.pop(0)
+ else:
+ bank.dat_ack = 0
+
+ rd_transaction = None
+ wr_transaction = None
+ if selected_bank_n >= 0:
+ we, adr = selected_transaction
+ if we:
+ wr_transaction = selected_bank_n, adr
+ else:
+ rd_transaction = selected_bank_n, adr
+
+ # data pipeline
+ self.rd_pipeline.append(rd_transaction)
+ self.wr_pipeline.append(wr_transaction)
+ done_rd_transaction = self.rd_pipeline.pop(0)
+ done_wr_transaction = self.wr_pipeline.pop(0)
+ if done_rd_transaction is not None:
+ selfp.bus.dat_r = self.model.read(done_rd_transaction[0], done_rd_transaction[1])
+ if done_wr_transaction is not None:
+ self.model.write(done_wr_transaction[0], done_wr_transaction[1],
+ selfp.bus.dat_w, selfp.bus.dat_we)
+ do_simulation.passive = True
--- /dev/null
+from migen import *
+from migen.genlib import roundrobin
+from migen.genlib.record import *
+from migen.genlib.misc import optree
+
+from misoc.mem.sdram.core.lasmibus import Interface
+
+
+def _getattr_all(l, attr):
+ it = iter(l)
+ r = getattr(next(it), attr)
+ for e in it:
+ if getattr(e, attr) != r:
+ raise ValueError
+ return r
+
+
+class LASMIxbar(Module):
+ def __init__(self, controllers, cba_shift):
+ self._controllers = controllers
+ self._cba_shift = cba_shift
+
+ self._rca_bits = _getattr_all(controllers, "aw")
+ self._dw = _getattr_all(controllers, "dw")
+ self._nbanks = _getattr_all(controllers, "nbanks")
+ self._req_queue_size = _getattr_all(controllers, "req_queue_size")
+ self._read_latency = _getattr_all(controllers, "read_latency")
+ self._write_latency = _getattr_all(controllers, "write_latency")
+
+ self._bank_bits = log2_int(self._nbanks, False)
+ self._controller_bits = log2_int(len(self._controllers), False)
+
+ self._masters = []
+
+ def get_master(self):
+ if self.finalized:
+ raise FinalizeError
+ lasmi_master = Interface(self._rca_bits + self._bank_bits + self._controller_bits,
+ self._dw, 1, self._req_queue_size, self._read_latency, self._write_latency)
+ self._masters.append(lasmi_master)
+ return lasmi_master
+
+ def do_finalize(self):
+ nmasters = len(self._masters)
+
+ m_ca, m_ba, m_rca = self._split_master_addresses(self._controller_bits,
+ self._bank_bits, self._rca_bits, self._cba_shift)
+
+ for nc, controller in enumerate(self._controllers):
+ if self._controller_bits:
+ controller_selected = [ca == nc for ca in m_ca]
+ else:
+ controller_selected = [1]*nmasters
+ master_req_acks = [0]*nmasters
+ master_dat_w_acks = [0]*nmasters
+ master_dat_r_acks = [0]*nmasters
+
+ rrs = [roundrobin.RoundRobin(nmasters, roundrobin.SP_CE) for n in range(self._nbanks)]
+ self.submodules += rrs
+ for nb, rr in enumerate(rrs):
+ bank = getattr(controller, "bank"+str(nb))
+
+ # for each master, determine if another bank locks it
+ master_locked = []
+ for nm, master in enumerate(self._masters):
+ locked = 0
+ for other_nb, other_rr in enumerate(rrs):
+ if other_nb != nb:
+ other_bank = getattr(controller, "bank"+str(other_nb))
+ locked = locked | (other_bank.lock & (other_rr.grant == nm))
+ master_locked.append(locked)
+
+ # arbitrate
+ bank_selected = [cs & (ba == nb) & ~locked for cs, ba, locked in zip(controller_selected, m_ba, master_locked)]
+ bank_requested = [bs & master.stb for bs, master in zip(bank_selected, self._masters)]
+ self.comb += [
+ rr.request.eq(Cat(*bank_requested)),
+ rr.ce.eq(~bank.stb & ~bank.lock)
+ ]
+
+ # route requests
+ self.comb += [
+ bank.adr.eq(Array(m_rca)[rr.grant]),
+ bank.we.eq(Array(self._masters)[rr.grant].we),
+ bank.stb.eq(Array(bank_requested)[rr.grant])
+ ]
+ master_req_acks = [master_req_ack | ((rr.grant == nm) & bank_selected[nm] & bank.req_ack)
+ for nm, master_req_ack in enumerate(master_req_acks)]
+ master_dat_w_acks = [master_dat_w_ack | ((rr.grant == nm) & bank.dat_w_ack)
+ for nm, master_dat_w_ack in enumerate(master_dat_w_acks)]
+ master_dat_r_acks = [master_dat_r_ack | ((rr.grant == nm) & bank.dat_r_ack)
+ for nm, master_dat_r_ack in enumerate(master_dat_r_acks)]
+
+ for nm, master_dat_w_ack in enumerate(master_dat_w_acks):
+ for i in range(self._write_latency):
+ new_master_dat_w_ack = Signal()
+ self.sync += new_master_dat_w_ack.eq(master_dat_w_ack)
+ master_dat_w_ack = new_master_dat_w_ack
+ master_dat_w_acks[nm] = master_dat_w_ack
+
+ for nm, master_dat_r_ack in enumerate(master_dat_r_acks):
+ for i in range(self._read_latency):
+ new_master_dat_r_ack = Signal()
+ self.sync += new_master_dat_r_ack.eq(master_dat_r_ack)
+ master_dat_r_ack = new_master_dat_r_ack
+ master_dat_r_acks[nm] = master_dat_r_ack
+
+ self.comb += [master.req_ack.eq(master_req_ack) for master, master_req_ack in zip(self._masters, master_req_acks)]
+ self.comb += [master.dat_w_ack.eq(master_dat_w_ack) for master, master_dat_w_ack in zip(self._masters, master_dat_w_acks)]
+ self.comb += [master.dat_r_ack.eq(master_dat_r_ack) for master, master_dat_r_ack in zip(self._masters, master_dat_r_acks)]
+
+ # route data writes
+ controller_selected_wl = controller_selected
+ for i in range(self._write_latency):
+ n_controller_selected_wl = [Signal() for i in range(nmasters)]
+ self.sync += [n.eq(o) for n, o in zip(n_controller_selected_wl, controller_selected_wl)]
+ controller_selected_wl = n_controller_selected_wl
+ dat_w_maskselect = []
+ dat_we_maskselect = []
+ for master, selected in zip(self._masters, controller_selected_wl):
+ o_dat_w = Signal(self._dw)
+ o_dat_we = Signal(self._dw//8)
+ self.comb += If(selected,
+ o_dat_w.eq(master.dat_w),
+ o_dat_we.eq(master.dat_we)
+ )
+ dat_w_maskselect.append(o_dat_w)
+ dat_we_maskselect.append(o_dat_we)
+ self.comb += [
+ controller.dat_w.eq(optree("|", dat_w_maskselect)),
+ controller.dat_we.eq(optree("|", dat_we_maskselect))
+ ]
+
+ # route data reads
+ if self._controller_bits:
+ for master in self._masters:
+ controller_sel = Signal(self._controller_bits)
+ for nc, controller in enumerate(self._controllers):
+ for nb in range(nbanks):
+ bank = getattr(controller, "bank"+str(nb))
+ self.comb += If(bank.stb & bank.ack, controller_sel.eq(nc))
+ for i in range(self._read_latency):
+ n_controller_sel = Signal(self._controller_bits)
+ self.sync += n_controller_sel.eq(controller_sel)
+ controller_sel = n_controller_sel
+ self.comb += master.dat_r.eq(Array(self._controllers)[controller_sel].dat_r)
+ else:
+ self.comb += [master.dat_r.eq(self._controllers[0].dat_r) for master in self._masters]
+
+ def _split_master_addresses(self, controller_bits, bank_bits, rca_bits, cba_shift):
+ m_ca = [] # controller address
+ m_ba = [] # bank address
+ m_rca = [] # row and column address
+ for master in self._masters:
+ cba = Signal(self._controller_bits + self._bank_bits)
+ rca = Signal(self._rca_bits)
+ cba_upper = cba_shift + controller_bits + bank_bits
+ self.comb += cba.eq(master.adr[cba_shift:cba_upper])
+ if cba_shift < self._rca_bits:
+ if cba_shift:
+ self.comb += rca.eq(Cat(master.adr[:cba_shift], master.adr[cba_upper:]))
+ else:
+ self.comb += rca.eq(master.adr[cba_upper:])
+ else:
+ self.comb += rca.eq(master.adr[:cba_shift])
+
+ if self._controller_bits:
+ ca = Signal(self._controller_bits)
+ ba = Signal(self._bank_bits)
+ self.comb += Cat(ba, ca).eq(cba)
+ else:
+ ca = None
+ ba = cba
+
+ m_ca.append(ca)
+ m_ba.append(ba)
+ m_rca.append(rca)
+ return m_ca, m_ba, m_rca
--- /dev/null
+from migen import *
+from migen.genlib.fsm import FSM, NextState
+
+class WB2LASMI(Module):
+ def __init__(self, wishbone, lasmim):
+
+ ###
+
+ # Control FSM
+ self.submodules.fsm = fsm = FSM(reset_state="IDLE")
+ fsm.act("IDLE",
+ If(wishbone.cyc & wishbone.stb,
+ NextState("REQUEST")
+ )
+ )
+ fsm.act("REQUEST",
+ lasmim.stb.eq(1),
+ lasmim.we.eq(wishbone.we),
+ If(lasmim.req_ack,
+ If(wishbone.we,
+ NextState("WRITE_DATA")
+ ).Else(
+ NextState("READ_DATA")
+ )
+ )
+ )
+ fsm.act("WRITE_DATA",
+ If(lasmim.dat_w_ack,
+ lasmim.dat_we.eq(wishbone.sel),
+ wishbone.ack.eq(1),
+ NextState("IDLE")
+ )
+ )
+ fsm.act("READ_DATA",
+ If(lasmim.dat_r_ack,
+ wishbone.ack.eq(1),
+ NextState("IDLE")
+ )
+ )
+
+ # Address / Datapath
+ self.comb += [
+ lasmim.adr.eq(wishbone.adr),
+ If(lasmim.dat_w_ack,
+ lasmim.dat_w.eq(wishbone.dat_w),
+ ),
+ wishbone.dat_r.eq(lasmim.dat_r)
+ ]
projects / litex.git / commitdiff