+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12557 "configure"
+#line 12554 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12663 "configure"
+#line 12660 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * acinclude.m4 (sim-bswap): Delete.
+ * configure: Regenerate.
+ * Make-common.in (SIM_BSWAP): Delete.
+ (CONFIG_CFLAGS): Delete $(SIM_BSWAP).
+ * sim-config.h (htonl, ntohl): Delete.
+ (WITH_BSWAP): Delete.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-options.c (sim_parse_args): Declare local save_opterr. Save
CPPFLAGS = @CPPFLAGS@
CXXFLAGS = @CXXFLAGS@
LDFLAGS = @LDFLAGS@
-SIM_BSWAP = @sim_bswap@
SIM_CFLAGS = @sim_cflags@
SIM_DEBUG = @sim_debug@
SIM_TRACE = @sim_trace@
$(SIM_DEFAULT_MODEL) \
$(SIM_TRACE) \
$(SIM_PROFILE) \
- $(SIM_BSWAP) \
$(SIM_ASSERT) \
$(SIM_ALIGNMENT) \
$(SIM_BITSIZE) \
AM_MAINTAINER_MODE
-dnl This is a generic option to enable special byte swapping
-dnl insns on *any* cpu.
-AC_ARG_ENABLE(sim-bswap,
-[AS_HELP_STRING([--enable-sim-bswap], [Use Host specific BSWAP instruction])],
-[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
-AC_SUBST(sim_bswap)
-
-
AC_ARG_ENABLE(sim-cflags,
[AS_HELP_STRING([--enable-sim-cflags=opts],
[Extra CFLAGS for use in building simulator])],
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10788 "configure"
+#line 10785 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10894 "configure"
+#line 10891 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
# define HOST_BYTE_ORDER BFD_ENDIAN_LITTLE
#endif
-#if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP
-#undef htonl
-#undef ntohl
-#define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; })
-#define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; })
-#endif
-\f
+
/* Until devices and tree properties are sorted out, tell sim-config.c
not to call the tree_find_foo fns. */
#define WITH_TREE_PROPERTIES 0
-/* Intel host BSWAP support:
-
- Whether to use bswap on the 486 and pentiums rather than the 386
- sequence that uses xchgb/rorl/xchgb */
-#ifndef WITH_BSWAP
-#define WITH_BSWAP 0
-#endif
-
-
-
/* SMP support:
Sets a limit on the number of processors that can be simulated. If
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12548 "configure"
+#line 12545 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12654 "configure"
+#line 12651 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interf.c (sim_open): Replace while loop with a call to countargv.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12514 "configure"
+#line 12511 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12620 "configure"
+#line 12617 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12540 "configure"
+#line 12537 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12646 "configure"
+#line 12643 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* compile.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12519 "configure"
+#line 12516 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12625 "configure"
+#line 12622 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
sim_default_model
sim_scache
sim_float
-sim_hostendian
sim_endian
sim_bitsize
sim_assert
-
-
-
-
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12540 "configure"
+#line 12537 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12646 "configure"
+#line 12643 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12537 "configure"
+#line 12534 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12643 "configure"
+#line 12640 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12520 "configure"
+#line 12517 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12626 "configure"
+#line 12623 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12542 "configure"
+#line 12539 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12648 "configure"
+#line 12645 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12533 "configure"
+#line 12530 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12639 "configure"
+#line 12636 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12566 "configure"
+#line 12563 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12672 "configure"
+#line 12669 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12539 "configure"
+#line 12536 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12645 "configure"
+#line 12642 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12535 "configure"
+#line 12532 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12641 "configure"
+#line 12638 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12530 "configure"
+#line 12527 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12636 "configure"
+#line 12633 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (sim-bswap): Delete.
+ * configure: Regenerate.
+ * INSTALL: Delete --enable-sim-bswap docs.
+ * Makefile.in (BSWAP_CFLAGS): Delete.
+ (CONFIG_CFLAGS): Delete $(BSWAP_CFLAGS).
+ * options.c (print_options): Delete WITH_BSWAP.
+ * sim-endian.h (htonl, ntohl): Delete.
+ * std-config.h (WITH_BSWAP): Delete.
+
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* main.c (main): Pass SIM_OPEN_STANDALONE to psim_options and
---enable-sim-bswap
-
-
-(x86 specific) Use the i486/P5/P6 byte swap instruction.
-
-PSIM contains generic byte swapping code. For the x86 (P[4-6]) PSIM
-can be built so that it uses the bswap instruction instead of relying
-on the compiler to generate byte swap code.
-
-Ex: default
-
-By default, when compiling with GCC-2 on an i486/P5/P6 the bswap
-instruction is used.
-
-
-
--enable-sim-endian=endian
SIM_CFLAGS = @sim_cflags@
INLINE_CFLAGS = @sim_inline@
-BSWAP_CFLAGS = @sim_bswap@
ENDIAN_CFLAGS = @sim_endian@
REGPARM_CFLAGS = @sim_regparm@
STDCALL_CFLAGS = @sim_stdcall@
TERMIO_CFLAGS = @sim_termio@
WARNING_CFLAGS = @sim_warnings@
DEVZERO_CFLAGS = @sim_devzero@
-CONFIG_CFLAGS = $(BSWAP_CFLAGS) \
+CONFIG_CFLAGS = \
$(ENDIAN_CFLAGS) \
$(REGPARM_CFLAGS) \
$(STDCALL_CFLAGS) \
sim_env
sim_hostbitsize
sim_igen_smp
-sim_bswap
+sim_hostendian
sim_pk_obj
sim_pk_src
sim_hw_obj
sim_default_model
sim_scache
sim_float
-sim_hostendian
sim_endian
sim_bitsize
sim_assert
enable_sim_alignment
enable_sim_assert
enable_sim_bitsize
-enable_sim_bswap
enable_sim_cflags
enable_sim_config
enable_sim_decode_mechanism
--enable-sim-alignment=align Specify strict or nonstrict alignment.
--enable-sim-assert Specify whether to perform random assertions.
--enable-sim-bitsize=n Specify target bitsize (32 or 64).
- --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.
--enable-sim-cflags=opts Extra CFLAGS for use in building simulator
--enable-sim-config=file Override default config file
--enable-sim-decode-mechanism=which Specify the instruction decode mechanism.
-
-
-
-
fi
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
-
ac_config_files="$ac_config_files Makefile"
fi],[sim_bitsize=""])dnl
-AC_ARG_ENABLE(sim-bswap,
-[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.],
-[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
-
-
AC_ARG_ENABLE(sim-cflags,
[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
[case "${enableval}" in
AC_SUBST(sim_pk_src)
AC_SUBST(sim_pk_obj)
AC_SUBST(sim_inline)
-AC_SUBST(sim_bswap)
AC_SUBST(sim_endian)
AC_SUBST(sim_regparm)
AC_SUBST(sim_stdcall)
printf_filtered ("WITH_HOST_BYTE_ORDER = %s\n", options_byte_order (WITH_HOST_BYTE_ORDER));
printf_filtered ("WITH_TARGET_BYTE_ORDER = %s\n", options_byte_order (WITH_TARGET_BYTE_ORDER));
printf_filtered ("WITH_XOR_ENDIAN = %d\n", WITH_XOR_ENDIAN);
- printf_filtered ("WITH_BSWAP = %d\n", WITH_BSWAP);
printf_filtered ("WITH_SMP = %d\n", WITH_SMP);
printf_filtered ("WITH_HOST_WORD_BITSIZE = %d\n", WITH_HOST_WORD_BITSIZE);
printf_filtered ("WITH_TARGET_WORD_BITSIZE = %d\n", WITH_TARGET_WORD_BITSIZE);
# endif
#endif
-#if (defined (__i486__) || defined (__i586__) || defined (__i686__)) && defined(__GNUC__) && WITH_BSWAP
-#undef htonl
-#undef ntohl
-#define htonl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; })
-#define ntohl(IN) __extension__ ({ int _out; __asm__ ("bswap %0" : "=r" (_out) : "0" (IN)); _out; })
-#endif
-
/* Power or PowerPC running AIX */
#if defined(_POWER) && defined(_AIX)
# if (WITH_HOST_BYTE_ORDER == 0)
#endif
-/* Intel host BSWAP support:
-
- Whether to use bswap on the 486 and pentiums rather than the 386
- sequence that uses xchgb/rorl/xchgb */
-#ifndef WITH_BSWAP
-#define WITH_BSWAP 0
-#endif
-
-
/* SMP support:
Sets a limit on the number of processors that can be simulated. If
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12512 "configure"
+#line 12509 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12618 "configure"
+#line 12615 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12517 "configure"
+#line 12514 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12623 "configure"
+#line 12620 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12534 "configure"
+#line 12531 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12640 "configure"
+#line 12637 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* sim-if.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12540 "configure"
+#line 12537 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12646 "configure"
+#line 12643 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
+2016-01-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
sim_stdio
sim_debug
sim_cflags
-sim_bswap
MAINT
MAINTAINER_MODE_FALSE
MAINTAINER_MODE_TRUE
with_gnu_ld
enable_libtool_lock
enable_maintainer_mode
-enable_sim_bswap
enable_sim_cflags
enable_sim_debug
enable_sim_stdio
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-sim-bswap Use Host specific BSWAP instruction
--enable-sim-cflags=opts
Extra CFLAGS for use in building simulator
--enable-sim-debug=opts Enable debugging flags (for developers of the sim
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12533 "configure"
+#line 12530 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12639 "configure"
+#line 12636 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-# Check whether --enable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then :
- enableval=$enable_sim_bswap; case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi
-else
- sim_bswap=""
-fi
-
-
-
# Check whether --enable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then :
enableval=$enable_sim_cflags; case "${enableval}" in
projects / binutils-gdb.git / commitdiff