SE O3 runs see an additional reg read per mmap() call.
[ 0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).\r
[ 0.000000] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns\r
[ 0.000014] Console: colour dummy device 80x25\r
-[ 0.000016] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)\r
-[ 0.000017] pid_max: default: 32768 minimum: 301\r
-[ 0.000025] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)\r
-[ 0.000026] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)\r
-[ 0.000087] hw perfevents: no hardware support available\r
-[ 1.060050] CPU1: failed to come online\r
+[ 0.000015] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)\r
+[ 0.000016] pid_max: default: 32768 minimum: 301\r
+[ 0.000024] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)\r
+[ 0.000025] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)\r
+[ 0.000086] hw perfevents: no hardware support available\r
+[ 1.060049] CPU1: failed to come online\r
[ 2.080100] CPU2: failed to come online\r
[ 3.100151] CPU3: failed to come online\r
[ 3.100153] Brought up 1 CPUs\r
-[ 3.100154] SMP: Total of 1 processors activated.\r
+[ 3.100153] SMP: Total of 1 processors activated.\r
[ 3.100180] devtmpfs: initialized\r
-[ 3.100808] atomic64_test: passed\r
-[ 3.100875] regulator-dummy: no parameters\r
-[ 3.101140] NET: Registered protocol family 16\r
-[ 3.101229] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000\r
-[ 3.101233] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.\r
-[ 3.101272] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]\r
-[ 3.101273] Serial: AMBA PL011 UART driver\r
-[ 3.101394] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000\r
-[ 3.101446] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3\r
-[ 3.102017] console [ttyAMA0] enabled\r
-[ 3.102081] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000\r
-[ 3.102107] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000\r
-[ 3.102133] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000\r
-[ 3.102158] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000\r
+[ 3.100805] atomic64_test: passed\r
+[ 3.100869] regulator-dummy: no parameters\r
+[ 3.101131] NET: Registered protocol family 16\r
+[ 3.101220] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000\r
+[ 3.101223] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.\r
+[ 3.101262] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]\r
+[ 3.101264] Serial: AMBA PL011 UART driver\r
+[ 3.101385] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000\r
+[ 3.101407] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3\r
+[ 3.101978] console [ttyAMA0] enabled\r
+[ 3.102041] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000\r
+[ 3.102067] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000\r
+[ 3.102093] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000\r
+[ 3.102118] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000\r
[ 3.130359] 3V3: 3300 mV \r
[ 3.130380] vgaarb: loaded\r
-[ 3.130422] SCSI subsystem initialized\r
-[ 3.130494] libata version 3.00 loaded.\r
-[ 3.130583] usbcore: registered new interface driver usbfs\r
-[ 3.130611] usbcore: registered new interface driver hub\r
-[ 3.130664] usbcore: registered new device driver usb\r
-[ 3.130699] pps_core: LinuxPPS API ver. 1 registered\r
-[ 3.130708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>\r
-[ 3.130728] PTP clock support registered\r
-[ 3.130897] Switched to clocksource arch_sys_counter\r
-[ 3.131875] NET: Registered protocol family 2\r
-[ 3.131949] TCP established hash table entries: 2048 (order: 2, 16384 bytes)\r
-[ 3.131965] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)\r
-[ 3.131982] TCP: Hash tables configured (established 2048 bind 2048)\r
-[ 3.131996] TCP: reno registered\r
-[ 3.132003] UDP hash table entries: 256 (order: 1, 8192 bytes)\r
-[ 3.132015] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)\r
-[ 3.132046] NET: Registered protocol family 1\r
-[ 3.132081] RPC: Registered named UNIX socket transport module.\r
-[ 3.132091] RPC: Registered udp transport module.\r
-[ 3.132099] RPC: Registered tcp transport module.\r
-[ 3.132107] RPC: Registered tcp NFSv4.1 backchannel transport module.\r
-[ 3.132118] PCI: CLS 0 bytes, default 64\r
-[ 3.132221] futex hash table entries: 1024 (order: 4, 65536 bytes)\r
-[ 3.132270] HugeTLB registered 2 MB page size, pre-allocated 0 pages\r
-[ 3.134007] fuse init (API version 7.23)\r
-[ 3.134064] msgmni has been set to 469\r
-[ 3.136091] io scheduler noop registered\r
-[ 3.136128] io scheduler cfq registered (default)\r
-[ 3.136418] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00\r
-[ 3.136420] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]\r
-[ 3.136421] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]\r
-[ 3.136423] pci_bus 0000:00: root bus resource [bus 00-ff]\r
-[ 3.136424] pci_bus 0000:00: scanning bus\r
-[ 3.136427] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000\r
-[ 3.136428] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]\r
-[ 3.136431] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]\r
-[ 3.136459] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185\r
-[ 3.136473] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]\r
-[ 3.136486] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]\r
-[ 3.136499] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]\r
-[ 3.136511] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]\r
-[ 3.136524] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]\r
-[ 3.136537] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]\r
-[ 3.136597] pci_bus 0000:00: fixups for bus\r
-[ 3.136607] pci_bus 0000:00: bus scan returning with max=00\r
-[ 3.136622] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc\r
-[ 3.136649] pci 0000:00:00.0: fixup irq: got 33\r
-[ 3.136659] pci 0000:00:00.0: assigning IRQ 33\r
-[ 3.136672] pci 0000:00:01.0: fixup irq: got 34\r
-[ 3.136682] pci 0000:00:01.0: assigning IRQ 34\r
-[ 3.136697] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]\r
-[ 3.136712] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]\r
-[ 3.136726] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]\r
-[ 3.136739] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]\r
-[ 3.136751] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]\r
-[ 3.136763] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]\r
-[ 3.136775] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]\r
-[ 3.136787] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]\r
-[ 3.137187] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\r
-[ 3.137353] ata_piix 0000:00:01.0: version 2.13\r
-[ 3.137355] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)\r
-[ 3.137360] ata_piix 0000:00:01.0: enabling bus mastering\r
-[ 3.137757] scsi0 : ata_piix\r
-[ 3.137894] scsi1 : ata_piix\r
-[ 3.137932] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34\r
-[ 3.137945] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34\r
-[ 3.138020] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI\r
-[ 3.138031] e1000: Copyright (c) 1999-2006 Intel Corporation.\r
-[ 3.138045] e1000 0000:00:00.0: enabling device (0000 -> 0002)\r
-[ 3.138055] e1000 0000:00:00.0: enabling bus mastering\r
-[ 3.290899] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66\r
-[ 3.290901] ata1.00: 2096640 sectors, multi 0: LBA \r
-[ 3.290907] ata1.00: configured for UDMA/33\r
-[ 3.290924] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5\r
-[ 3.290985] sd 0:0:0:0: Attached scsi generic sg0 type 0\r
-[ 3.290993] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)\r
-[ 3.291007] sd 0:0:0:0: [sda] Write Protect is off\r
-[ 3.291008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00\r
-[ 3.291015] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA\r
-[ 3.291068] sda: sda1\r
-[ 3.291130] sd 0:0:0:0: [sda] Attached SCSI disk\r
-[ 3.411193] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01\r
-[ 3.411208] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection\r
-[ 3.411238] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k\r
-[ 3.411249] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.\r
-[ 3.411280] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k\r
-[ 3.411293] igb: Copyright (c) 2007-2014 Intel Corporation.\r
-[ 3.411416] usbcore: registered new interface driver usb-storage\r
-[ 3.411488] mousedev: PS/2 mouse device common for all mice\r
-[ 3.411666] usbcore: registered new interface driver usbhid\r
-[ 3.411675] usbhid: USB HID core driver\r
-[ 3.411700] TCP: cubic registered\r
-[ 3.411707] NET: Registered protocol family 17\r
-\0[ 3.411932] VFS: Mounted root (ext2 filesystem) on device 8:1.\r
-[ 3.411942] devtmpfs: mounted\r
-[ 3.411950] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)\r
+[ 3.130421] SCSI subsystem initialized\r
+[ 3.130492] libata version 3.00 loaded.\r
+[ 3.130577] usbcore: registered new interface driver usbfs\r
+[ 3.130605] usbcore: registered new interface driver hub\r
+[ 3.130658] usbcore: registered new device driver usb\r
+[ 3.130692] pps_core: LinuxPPS API ver. 1 registered\r
+[ 3.130701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>\r
+[ 3.130721] PTP clock support registered\r
+[ 3.130886] Switched to clocksource arch_sys_counter\r
+[ 3.131839] NET: Registered protocol family 2\r
+[ 3.131931] TCP established hash table entries: 2048 (order: 2, 16384 bytes)\r
+[ 3.131947] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)\r
+[ 3.131964] TCP: Hash tables configured (established 2048 bind 2048)\r
+[ 3.131979] TCP: reno registered\r
+[ 3.131985] UDP hash table entries: 256 (order: 1, 8192 bytes)\r
+[ 3.131997] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)\r
+[ 3.132028] NET: Registered protocol family 1\r
+[ 3.132061] RPC: Registered named UNIX socket transport module.\r
+[ 3.132071] RPC: Registered udp transport module.\r
+[ 3.132079] RPC: Registered tcp transport module.\r
+[ 3.132087] RPC: Registered tcp NFSv4.1 backchannel transport module.\r
+[ 3.132098] PCI: CLS 0 bytes, default 64\r
+[ 3.132201] futex hash table entries: 1024 (order: 4, 65536 bytes)\r
+[ 3.132250] HugeTLB registered 2 MB page size, pre-allocated 0 pages\r
+[ 3.133974] fuse init (API version 7.23)\r
+[ 3.134030] msgmni has been set to 469\r
+[ 3.136051] io scheduler noop registered\r
+[ 3.136088] io scheduler cfq registered (default)\r
+[ 3.136364] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00\r
+[ 3.136366] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]\r
+[ 3.136367] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]\r
+[ 3.136369] pci_bus 0000:00: root bus resource [bus 00-ff]\r
+[ 3.136370] pci_bus 0000:00: scanning bus\r
+[ 3.136372] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000\r
+[ 3.136374] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]\r
+[ 3.136377] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]\r
+[ 3.136394] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185\r
+[ 3.136396] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]\r
+[ 3.136398] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]\r
+[ 3.136399] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]\r
+[ 3.136401] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]\r
+[ 3.136403] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]\r
+[ 3.136405] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]\r
+[ 3.136422] pci_bus 0000:00: fixups for bus\r
+[ 3.136423] pci_bus 0000:00: bus scan returning with max=00\r
+[ 3.136425] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc\r
+[ 3.136430] pci 0000:00:00.0: fixup irq: got 33\r
+[ 3.136431] pci 0000:00:00.0: assigning IRQ 33\r
+[ 3.136434] pci 0000:00:01.0: fixup irq: got 34\r
+[ 3.136435] pci 0000:00:01.0: assigning IRQ 34\r
+[ 3.136437] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]\r
+[ 3.136439] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]\r
+[ 3.136441] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]\r
+[ 3.136442] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]\r
+[ 3.136444] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]\r
+[ 3.136458] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]\r
+[ 3.136471] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]\r
+[ 3.136484] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]\r
+[ 3.137065] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\r
+[ 3.137231] ata_piix 0000:00:01.0: version 2.13\r
+[ 3.137233] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)\r
+[ 3.137238] ata_piix 0000:00:01.0: enabling bus mastering\r
+[ 3.137427] scsi0 : ata_piix\r
+[ 3.137561] scsi1 : ata_piix\r
+[ 3.137617] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34\r
+[ 3.137630] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34\r
+[ 3.137788] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI\r
+[ 3.137801] e1000: Copyright (c) 1999-2006 Intel Corporation.\r
+[ 3.137820] e1000 0000:00:00.0: enabling device (0000 -> 0002)\r
+[ 3.137832] e1000 0000:00:00.0: enabling bus mastering\r
+[ 3.290888] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66\r
+[ 3.290890] ata1.00: 2096640 sectors, multi 0: LBA \r
+[ 3.290896] ata1.00: configured for UDMA/33\r
+[ 3.290913] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5\r
+[ 3.290974] sd 0:0:0:0: Attached scsi generic sg0 type 0\r
+[ 3.290982] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)\r
+[ 3.290996] sd 0:0:0:0: [sda] Write Protect is off\r
+[ 3.290997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00\r
+[ 3.291004] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA\r
+[ 3.291057] sda: sda1\r
+[ 3.291119] sd 0:0:0:0: [sda] Attached SCSI disk\r
+[ 3.411182] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01\r
+[ 3.411197] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection\r
+[ 3.411227] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k\r
+[ 3.411238] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.\r
+[ 3.411269] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k\r
+[ 3.411282] igb: Copyright (c) 2007-2014 Intel Corporation.\r
+[ 3.411405] usbcore: registered new interface driver usb-storage\r
+[ 3.411475] mousedev: PS/2 mouse device common for all mice\r
+[ 3.411653] usbcore: registered new interface driver usbhid\r
+[ 3.411663] usbhid: USB HID core driver\r
+[ 3.411687] TCP: cubic registered\r
+[ 3.411694] NET: Registered protocol family 17\r
+\0[ 3.411918] VFS: Mounted root (ext2 filesystem) on device 8:1.\r
+[ 3.411928] devtmpfs: mounted\r
+[ 3.411936] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)\r
\0\0\rINIT: \0version 2.88 booting\0\r\r
\0Starting udev\r
-[ 3.450204] udevd[607]: starting version 182\r
+[ 3.450190] udevd[607]: starting version 182\r
Starting Bootlog daemon: bootlogd.\r\r
-[ 3.543300] random: dd urandom read with 19 bits of entropy available\r
+[ 3.533187] random: dd urandom read with 19 bits of entropy available\r
Populating dev cache\r\r
net.ipv4.conf.default.rp_filter = 1\r\r
net.ipv4.conf.all.rp_filter = 1\r\r
hwclock: can't open '/dev/misc/rtc': No such file or directory\r\r
\rINIT: Entering runlevel: 5\r\r\r
Configuring network interfaces... udhcpc (v1.21.1) started\r\r
-[ 3.681115] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None\r
+[ 3.671104] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None\r
Sending discover...\r\r
Sending discover...\r\r
Sending discover...\r\r
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/mcf
+executable=/dist/m5/cpu2000/binaries/arm/linux/mcf
gid=100
-input=/scratch/nilay/GEM5/dist/m5/cpu2000/data/mcf/smred/input/mcf.in
+input=/dist/m5/cpu2000/data/mcf/smred/input/mcf.in
kvmInSE=false
max_stack_size=67108864
output=cout
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (256 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
+warn: CP14 unimplemented crn[8], opc1[2], crm[9], opc2[4]
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Sep 14 2015 23:29:19
-gem5 started Sep 15 2015 02:12:41
-gem5 executing on ribera.cs.wisc.edu
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/10.mcf/arm/linux/o3-timing -re /scratch/nilay/GEM5/gem5/tests/run.py build/ARM/tests/opt/long/se/10.mcf/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 19:54:42
+gem5 executing on dinar2c11, pid 10367
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/10.mcf/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/10.mcf/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
flow value : 3080014995
checksum : 68389
optimal
-Exiting @ tick 58182114500 because target called exit()
+Exiting @ tick 58178990500 because target called exit()
sim_ticks 58178990500 # Number of ticks simulated
final_tick 58178990500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 122973 # Simulator instruction rate (inst/s)
-host_op_rate 123585 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 78976040 # Simulator tick rate (ticks/s)
-host_mem_usage 539340 # Number of bytes of host memory used
-host_seconds 736.67 # Real time elapsed on the host
+host_inst_rate 60429 # Simulator instruction rate (inst/s)
+host_op_rate 60730 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 38808737 # Simulator tick rate (ticks/s)
+host_mem_usage 520460 # Number of bytes of host memory used
+host_seconds 1499.12 # Real time elapsed on the host
sim_insts 90589799 # Number of instructions simulated
sim_ops 91041030 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 1.284449 # CPI: Total CPI of All Threads
system.cpu.ipc 0.778544 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.778544 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 108112150 # number of integer regfile reads
+system.cpu.int_regfile_reads 108112154 # number of integer regfile reads
system.cpu.int_regfile_writes 58701199 # number of integer regfile writes
system.cpu.fp_regfile_reads 58 # number of floating regfile reads
system.cpu.fp_regfile_writes 93 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=20
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=20
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
addr_ranges=0:18446744073709551615
assoc=8
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=12
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/x86/linux/mcf
+executable=/dist/m5/cpu2000/binaries/x86/linux/mcf
gid=100
-input=/scratch/nilay/GEM5/dist/m5/cpu2000/data/mcf/smred/input/mcf.in
+input=/dist/m5/cpu2000/data/mcf/smred/input/mcf.in
kvmInSE=false
max_stack_size=67108864
output=cout
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (256 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Sep 14 2015 22:13:36
-gem5 started Sep 14 2015 22:43:54
-gem5 executing on ribera.cs.wisc.edu
-command line: build/X86/gem5.opt -d build/X86/tests/opt/long/se/10.mcf/x86/linux/o3-timing -re /scratch/nilay/GEM5/gem5/tests/run.py build/X86/tests/opt/long/se/10.mcf/x86/linux/o3-timing
+gem5 compiled Mar 15 2016 19:39:16
+gem5 started Mar 15 2016 19:40:29
+gem5 executing on dinar2c11, pid 3692
+command line: build/X86/gem5.opt -d build/X86/tests/opt/long/se/10.mcf/x86/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/X86/tests/opt/long/se/10.mcf/x86/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
flow value : 3080014995
checksum : 68389
optimal
-Exiting @ tick 61602395500 because target called exit()
+Exiting @ tick 61602281500 because target called exit()
sim_ticks 61602281500 # Number of ticks simulated
final_tick 61602281500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 110070 # Simulator instruction rate (inst/s)
-host_op_rate 193816 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 42918086 # Simulator tick rate (ticks/s)
-host_mem_usage 460124 # Number of bytes of host memory used
-host_seconds 1435.35 # Real time elapsed on the host
+host_inst_rate 59652 # Simulator instruction rate (inst/s)
+host_op_rate 105038 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 23259273 # Simulator tick rate (ticks/s)
+host_mem_usage 445096 # Number of bytes of host memory used
+host_seconds 2648.50 # Real time elapsed on the host
sim_insts 157988547 # Number of instructions simulated
sim_ops 278192464 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 0.779832 # CPI: Total CPI of All Threads
system.cpu.ipc 1.282327 # IPC: Instructions Per Cycle
system.cpu.ipc_total 1.282327 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 491477132 # number of integer regfile reads
+system.cpu.int_regfile_reads 491477136 # number of integer regfile reads
system.cpu.int_regfile_writes 239432261 # number of integer regfile writes
system.cpu.fp_regfile_reads 110 # number of floating regfile reads
system.cpu.fp_regfile_writes 84 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/parser
+executable=/dist/m5/cpu2000/binaries/arm/linux/parser
gid=100
-input=/scratch/nilay/GEM5/dist/m5/cpu2000/data/parser/mdred/input/parser.in
+input=/dist/m5/cpu2000/data/parser/mdred/input/parser.in
kvmInSE=false
max_stack_size=67108864
output=cout
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
warn: CP14 unimplemented crn[8], opc1[2], crm[9], opc2[4]
+Redirecting stdout to build/ARM/tests/opt/long/se/20.parser/arm/linux/o3-timing/simout
+Redirecting stderr to build/ARM/tests/opt/long/se/20.parser/arm/linux/o3-timing/simerr
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Apr 22 2015 10:58:25
-gem5 started Apr 22 2015 11:19:35
-gem5 executing on phenom
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/20.parser/arm/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/se/20.parser/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 21:14:27
+gem5 executing on dinar2c11, pid 11560
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/20.parser/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/20.parser/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
- 0: system.cpu.isa: ISA system set to: 0 0x3ca3710
info: Entering event queue @ 0. Starting simulation...
Reading the dictionary files: *************************************************
about 2 million people attended
the five best costumes got prizes
No errors!
-Exiting @ tick 233381523500 because target called exit()
+Exiting @ tick 233975583000 because target called exit()
sim_ticks 233975583000 # Number of ticks simulated
final_tick 233975583000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 134400 # Simulator instruction rate (inst/s)
-host_op_rate 145602 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 62240486 # Simulator tick rate (ticks/s)
-host_mem_usage 347620 # Number of bytes of host memory used
-host_seconds 3759.22 # Real time elapsed on the host
+host_inst_rate 86832 # Simulator instruction rate (inst/s)
+host_op_rate 94070 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 40212079 # Simulator tick rate (ticks/s)
+host_mem_usage 330216 # Number of bytes of host memory used
+host_seconds 5818.54 # Real time elapsed on the host
sim_insts 505237724 # Number of instructions simulated
sim_ops 547350945 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 0.926200 # CPI: Total CPI of All Threads
system.cpu.ipc 1.079680 # IPC: Instructions Per Cycle
system.cpu.ipc_total 1.079680 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 611089761 # number of integer regfile reads
+system.cpu.int_regfile_reads 611089815 # number of integer regfile reads
system.cpu.int_regfile_writes 328120494 # number of integer regfile writes
system.cpu.fp_regfile_reads 16 # number of floating regfile reads
system.cpu.cc_regfile_reads 2170189724 # number of cc regfile reads
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/eon
+executable=/dist/m5/cpu2000/binaries/arm/linux/eon
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
getting pixel output filename pixels_out.cook
opening control file chair.control.cook
opening camera file chair.camera
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Sep 14 2015 23:29:19
-gem5 started Sep 15 2015 01:15:27
-gem5 executing on ribera.cs.wisc.edu
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/30.eon/arm/linux/o3-timing -re /scratch/nilay/GEM5/gem5/tests/run.py build/ARM/tests/opt/long/se/30.eon/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 21:05:26
+gem5 executing on dinar2c11, pid 11410
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/30.eon/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/30.eon/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
info: Increasing stack size by one page.
info: Increasing stack size by one page.
OO-style eon Time= 0.110000
-Exiting @ tick 112687034500 because target called exit()
+Exiting @ tick 116576497500 because target called exit()
sim_ticks 116576497500 # Number of ticks simulated
final_tick 116576497500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 117910 # Simulator instruction rate (inst/s)
-host_op_rate 141564 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 50343079 # Simulator tick rate (ticks/s)
-host_mem_usage 339456 # Number of bytes of host memory used
-host_seconds 2315.64 # Real time elapsed on the host
+host_inst_rate 72932 # Simulator instruction rate (inst/s)
+host_op_rate 87563 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 31139070 # Simulator tick rate (ticks/s)
+host_mem_usage 321028 # Number of bytes of host memory used
+host_seconds 3743.74 # Real time elapsed on the host
sim_insts 273037220 # Number of instructions simulated
sim_ops 327811602 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 0.853924 # CPI: Total CPI of All Threads
system.cpu.ipc 1.171065 # IPC: Instructions Per Cycle
system.cpu.ipc_total 1.171065 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 331328730 # number of integer regfile reads
+system.cpu.int_regfile_reads 331328732 # number of integer regfile reads
system.cpu.int_regfile_writes 136938455 # number of integer regfile writes
system.cpu.fp_regfile_reads 187108865 # number of floating regfile reads
system.cpu.fp_regfile_writes 132177694 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/perlbmk
+executable=/dist/m5/cpu2000/binaries/arm/linux/perlbmk
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
warn: fcntl64(3, 2) passed through to host
+Redirecting stdout to build/ARM/tests/opt/long/se/40.perlbmk/arm/linux/o3-timing/simout
+Redirecting stderr to build/ARM/tests/opt/long/se/40.perlbmk/arm/linux/o3-timing/simerr
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Apr 22 2015 10:58:25
-gem5 started Apr 22 2015 11:51:12
-gem5 executing on phenom
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/40.perlbmk/arm/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/se/40.perlbmk/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 20:24:49
+gem5 executing on dinar2c11, pid 10851
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/40.perlbmk/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/40.perlbmk/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
- 0: system.cpu.isa: ISA system set to: 0 0x36128d0
info: Entering event queue @ 0. Starting simulation...
info: Increasing stack size by one page.
info: Increasing stack size by one page.
2000: 2845746745
1000: 2068042552
0: 290958364
-Exiting @ tick 409399480000 because target called exit()
+Exiting @ tick 452563515000 because target called exit()
sim_ticks 452563515000 # Number of ticks simulated
final_tick 452563515000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 88595 # Simulator instruction rate (inst/s)
-host_op_rate 109072 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 62584453 # Simulator tick rate (ticks/s)
-host_mem_usage 324544 # Number of bytes of host memory used
-host_seconds 7231.25 # Real time elapsed on the host
+host_inst_rate 57394 # Simulator instruction rate (inst/s)
+host_op_rate 70660 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 40544083 # Simulator tick rate (ticks/s)
+host_mem_usage 306292 # Number of bytes of host memory used
+host_seconds 11162.26 # Real time elapsed on the host
sim_insts 640649299 # Number of instructions simulated
sim_ops 788724958 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 1.412828 # CPI: Total CPI of All Threads
system.cpu.ipc 0.707800 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.707800 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 995808117 # number of integer regfile reads
+system.cpu.int_regfile_reads 995808121 # number of integer regfile reads
system.cpu.int_regfile_writes 567906123 # number of integer regfile writes
system.cpu.fp_regfile_reads 31889839 # number of floating regfile reads
system.cpu.fp_regfile_writes 22959494 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/vortex
+executable=/dist/m5/cpu2000/binaries/arm/linux/vortex
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
+Redirecting stdout to build/ARM/tests/opt/long/se/50.vortex/arm/linux/o3-timing/simout
+Redirecting stderr to build/ARM/tests/opt/long/se/50.vortex/arm/linux/o3-timing/simerr
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Apr 22 2015 10:58:25
-gem5 started Apr 22 2015 11:16:00
-gem5 executing on phenom
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/50.vortex/arm/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/se/50.vortex/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 20:46:50
+gem5 executing on dinar2c11, pid 11157
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/50.vortex/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/50.vortex/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
- 0: system.cpu.isa: ISA system set to: 0 0x3dc8200
info: Entering event queue @ 0. Starting simulation...
info: Increasing stack size by one page.
-Exiting @ tick 33359312000 because target called exit()
+Exiting @ tick 33784139000 because target called exit()
sim_ticks 33784139000 # Number of ticks simulated
final_tick 33784139000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 118438 # Simulator instruction rate (inst/s)
-host_op_rate 151468 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 56430150 # Simulator tick rate (ticks/s)
-host_mem_usage 329476 # Number of bytes of host memory used
-host_seconds 598.69 # Real time elapsed on the host
+host_inst_rate 59206 # Simulator instruction rate (inst/s)
+host_op_rate 75718 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 28209032 # Simulator tick rate (ticks/s)
+host_mem_usage 312216 # Number of bytes of host memory used
+host_seconds 1197.64 # Real time elapsed on the host
sim_insts 70907630 # Number of instructions simulated
sim_ops 90682585 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 0.952906 # CPI: Total CPI of All Threads
system.cpu.ipc 1.049422 # IPC: Instructions Per Cycle
system.cpu.ipc_total 1.049422 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 102292430 # number of integer regfile reads
+system.cpu.int_regfile_reads 102292438 # number of integer regfile reads
system.cpu.int_regfile_writes 56802415 # number of integer regfile writes
system.cpu.fp_regfile_reads 38 # number of floating regfile reads
system.cpu.fp_regfile_writes 22 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/bzip2
+executable=/dist/m5/cpu2000/binaries/arm/linux/bzip2
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
warn: CP14 unimplemented crn[8], opc1[2], crm[9], opc2[4]
+Redirecting stdout to build/ARM/tests/opt/long/se/60.bzip2/arm/linux/o3-timing/simout
+Redirecting stderr to build/ARM/tests/opt/long/se/60.bzip2/arm/linux/o3-timing/simerr
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Apr 22 2015 10:58:25
-gem5 started Apr 22 2015 12:38:48
-gem5 executing on phenom
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/60.bzip2/arm/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/se/60.bzip2/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 20:34:58
+gem5 executing on dinar2c11, pid 10996
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/60.bzip2/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/60.bzip2/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
- 0: system.cpu.isa: ISA system set to: 0 0x39c9fd0
info: Entering event queue @ 0. Starting simulation...
spec_init
Loading Input Data
Uncompressed data 1048576 bytes in length
Uncompressed data compared correctly
Tested 1MB buffer: OK!
-Exiting @ tick 771782683000 because target called exit()
+Exiting @ tick 767874998000 because target called exit()
sim_ticks 767874998000 # Number of ticks simulated
final_tick 767874998000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 133325 # Simulator instruction rate (inst/s)
-host_op_rate 143638 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 66282190 # Simulator tick rate (ticks/s)
-host_mem_usage 359880 # Number of bytes of host memory used
-host_seconds 11584.94 # Real time elapsed on the host
+host_inst_rate 97609 # Simulator instruction rate (inst/s)
+host_op_rate 105159 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 48526138 # Simulator tick rate (ticks/s)
+host_mem_usage 342328 # Number of bytes of host memory used
+host_seconds 15823.95 # Real time elapsed on the host
sim_insts 1544563024 # Number of instructions simulated
sim_ops 1664032416 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 0.994294 # CPI: Total CPI of All Threads
system.cpu.ipc 1.005739 # IPC: Instructions Per Cycle
system.cpu.ipc_total 1.005739 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 2175836503 # number of integer regfile reads
+system.cpu.int_regfile_reads 2175836515 # number of integer regfile reads
system.cpu.int_regfile_writes 1261593461 # number of integer regfile writes
system.cpu.fp_regfile_reads 40 # number of floating regfile reads
system.cpu.fp_regfile_writes 51 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=8
write_buffers=16
+writeback_clean=true
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
[system.cpu.isa]
type=ArmISA
+decoderFlavour=Generic
eventq_index=0
fpsid=1090793632
id_aa64afr0_el1=0
addr_ranges=0:18446744073709551615
assoc=16
clk_domain=system.cpu_clk_domain
+clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=8
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/scratch/nilay/GEM5/dist/m5/cpu2000/binaries/arm/linux/twolf
+executable=/dist/m5/cpu2000/binaries/arm/linux/twolf
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
+Redirecting stdout to build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing/simout
+Redirecting stderr to build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing/simerr
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Apr 22 2015 10:58:25
-gem5 started Apr 22 2015 12:02:59
-gem5 executing on phenom
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing
+gem5 compiled Mar 15 2016 19:53:43
+gem5 started Mar 15 2016 20:14:36
+gem5 executing on dinar2c11, pid 10702
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing
Couldn't unlink build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing/smred.sav
Couldn't unlink build/ARM/tests/opt/long/se/70.twolf/arm/linux/o3-timing/smred.sv2
Global frequency set at 1000000000000 ticks per second
- 0: system.cpu.isa: ISA system set to: 0 0x2e8fab0
info: Entering event queue @ 0. Starting simulation...
TimberWolfSC version:v4.3a date:Mon Jan 25 18:50:36 EST 1988
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
-122 123 124 Exiting @ tick 85027009000 because target called exit()
+122 123 124 Exiting @ tick 85490431000 because target called exit()
sim_ticks 85490431000 # Number of ticks simulated
final_tick 85490431000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 128362 # Simulator instruction rate (inst/s)
-host_op_rate 135315 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 63688458 # Simulator tick rate (ticks/s)
-host_mem_usage 319620 # Number of bytes of host memory used
-host_seconds 1342.32 # Real time elapsed on the host
+host_inst_rate 61561 # Simulator instruction rate (inst/s)
+host_op_rate 64896 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 30544518 # Simulator tick rate (ticks/s)
+host_mem_usage 301600 # Number of bytes of host memory used
+host_seconds 2798.88 # Real time elapsed on the host
sim_insts 172303022 # Number of instructions simulated
sim_ops 181635954 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 0.992327 # CPI: Total CPI of All Threads
system.cpu.ipc 1.007733 # IPC: Instructions Per Cycle
system.cpu.ipc_total 1.007733 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 218966975 # number of integer regfile reads
+system.cpu.int_regfile_reads 218966992 # number of integer regfile reads
system.cpu.int_regfile_writes 114516229 # number of integer regfile writes
system.cpu.fp_regfile_reads 2904204 # number of floating regfile reads
system.cpu.fp_regfile_writes 2441504 # number of floating regfile writes
cache_line_size=64
clk_domain=system.clk_domain
eventq_index=0
+exit_on_work_items=false
init_param=0
kernel=
kernel_addr_check=true
mem_ranges=
memories=system.physmem
mmap_using_noreserve=false
+multi_thread=false
num_work_ids=16
readfile=
symbolfile=
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
tags=system.cpu.dcache.tags
tgts_per_mshr=20
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.dcache_port
mem_side=system.cpu.toL2Bus.slave[1]
addr_ranges=0:18446744073709551615
assoc=2
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
tags=system.cpu.icache.tags
tgts_per_mshr=20
write_buffers=8
+writeback_clean=true
cpu_side=system.cpu.icache_port
mem_side=system.cpu.toL2Bus.slave[0]
addr_ranges=0:18446744073709551615
assoc=8
clk_domain=system.cpu_clk_domain
+clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
tags=system.cpu.l2cache.tags
tgts_per_mshr=12
write_buffers=8
+writeback_clean=false
cpu_side=system.cpu.toL2Bus.master[0]
mem_side=system.membus.slave[1]
[system.cpu.toL2Bus]
type=CoherentXBar
+children=snoop_filter
clk_domain=system.cpu_clk_domain
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
-snoop_filter=Null
+snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
system=system
use_default_range=false
master=system.cpu.l2cache.cpu_side
slave=system.cpu.icache.mem_side system.cpu.dcache.mem_side system.cpu.itb.walker.port system.cpu.dtb.walker.port
+[system.cpu.toL2Bus.snoop_filter]
+type=SnoopFilter
+eventq_index=0
+lookup_latency=0
+max_capacity=8388608
+system=system
+
[system.cpu.tracer]
type=ExeTracer
eventq_index=0
errout=cerr
euid=100
eventq_index=0
-executable=/home/stever/m5/dist/cpu2000/binaries/x86/linux/twolf
+executable=/dist/m5/cpu2000/binaries/x86/linux/twolf
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
-warn: Sockets disabled, not accepting gdb connections
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Sep 14 2015 22:13:36
-gem5 started Sep 14 2015 23:11:50
-gem5 executing on ribera.cs.wisc.edu
-command line: build/X86/gem5.opt -d build/X86/tests/opt/long/se/70.twolf/x86/linux/o3-timing -re /scratch/nilay/GEM5/gem5/tests/run.py build/X86/tests/opt/long/se/70.twolf/x86/linux/o3-timing
+gem5 compiled Mar 15 2016 19:39:16
+gem5 started Mar 15 2016 19:40:28
+gem5 executing on dinar2c11, pid 3690
+command line: build/X86/gem5.opt -d build/X86/tests/opt/long/se/70.twolf/x86/linux/o3-timing -re /home/stever/gem5-public/tests/run.py build/X86/tests/opt/long/se/70.twolf/x86/linux/o3-timing
Couldn't unlink build/X86/tests/opt/long/se/70.twolf/x86/linux/o3-timing/smred.sav
Couldn't unlink build/X86/tests/opt/long/se/70.twolf/x86/linux/o3-timing/smred.sv2
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
122 123 124 info: Increasing stack size by one page.
-Exiting @ tick 79147317000 because target called exit()
+Exiting @ tick 79140979500 because target called exit()
sim_ticks 79140979500 # Number of ticks simulated
final_tick 79140979500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 91812 # Simulator instruction rate (inst/s)
-host_op_rate 153885 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 55016334 # Simulator tick rate (ticks/s)
-host_mem_usage 351180 # Number of bytes of host memory used
-host_seconds 1438.50 # Real time elapsed on the host
+host_inst_rate 48534 # Simulator instruction rate (inst/s)
+host_op_rate 81347 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 29082810 # Simulator tick rate (ticks/s)
+host_mem_usage 336912 # Number of bytes of host memory used
+host_seconds 2721.23 # Real time elapsed on the host
sim_insts 132071192 # Number of instructions simulated
sim_ops 221363384 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 1.198459 # CPI: Total CPI of All Threads
system.cpu.ipc 0.834405 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.834405 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 448575218 # number of integer regfile reads
+system.cpu.int_regfile_reads 448575235 # number of integer regfile reads
system.cpu.int_regfile_writes 232602901 # number of integer regfile writes
system.cpu.fp_regfile_reads 3212636 # number of floating regfile reads
system.cpu.fp_regfile_writes 1997796 # number of floating regfile writes
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/alpha/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/alpha/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 13:49:21
-gem5 started Jan 21 2016 13:50:25
-gem5 executing on zizzer, pid 34061
-command line: build/ALPHA/gem5.opt -d build/ALPHA/tests/opt/quick/se/00.hello/alpha/linux/o3-timing -re /z/atgutier/gem5/gem5-commit/tests/run.py build/ALPHA/tests/opt/quick/se/00.hello/alpha/linux/o3-timing
+gem5 compiled Mar 13 2016 22:43:13
+gem5 started Mar 13 2016 22:49:02
+gem5 executing on phenom, pid 19909
+command line: build/ALPHA/gem5.opt -d build/ALPHA/tests/opt/quick/se/00.hello/alpha/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ALPHA/tests/opt/quick/se/00.hello/alpha/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 21900500 # Number of ticks simulated
final_tick 21900500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 26026 # Simulator instruction rate (inst/s)
-host_op_rate 26023 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 89433474 # Simulator tick rate (ticks/s)
-host_mem_usage 232656 # Number of bytes of host memory used
-host_seconds 0.25 # Real time elapsed on the host
+host_inst_rate 27169 # Simulator instruction rate (inst/s)
+host_op_rate 27167 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 93368241 # Simulator tick rate (ticks/s)
+host_mem_usage 228936 # Number of bytes of host memory used
+host_seconds 0.23 # Real time elapsed on the host
sim_insts 6372 # Number of instructions simulated
sim_ops 6372 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 6.874137 # CPI: Total CPI of All Threads
system.cpu.ipc 0.145473 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.145473 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 12362 # number of integer regfile reads
+system.cpu.int_regfile_reads 12363 # number of integer regfile reads
system.cpu.int_regfile_writes 7056 # number of integer regfile writes
system.cpu.fp_regfile_reads 8 # number of floating regfile reads
system.cpu.fp_regfile_writes 2 # number of floating regfile writes
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/arm/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/arm/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:45:42
-gem5 started Jan 21 2016 14:46:34
-gem5 executing on zizzer, pid 20759
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing-checker -re /z/atgutier/gem5/gem5-commit/tests/run.py build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing-checker
+gem5 compiled Mar 13 2016 22:35:59
+gem5 started Mar 13 2016 22:47:14
+gem5 executing on phenom, pid 19877
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing-checker -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing-checker
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 17170000 # Number of ticks simulated
final_tick 17170000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 56453 # Simulator instruction rate (inst/s)
-host_op_rate 66106 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 211025109 # Simulator tick rate (ticks/s)
-host_mem_usage 270504 # Number of bytes of host memory used
-host_seconds 0.08 # Real time elapsed on the host
+host_inst_rate 9367 # Simulator instruction rate (inst/s)
+host_op_rate 10970 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 35022410 # Simulator tick rate (ticks/s)
+host_mem_usage 245324 # Number of bytes of host memory used
+host_seconds 0.49 # Real time elapsed on the host
sim_insts 4592 # Number of instructions simulated
sim_ops 5378 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 7.478441 # CPI: Total CPI of All Threads
system.cpu.ipc 0.133718 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.133718 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 7636 # number of integer regfile reads
+system.cpu.int_regfile_reads 7637 # number of integer regfile reads
system.cpu.int_regfile_writes 4176 # number of integer regfile writes
system.cpu.fp_regfile_reads 32 # number of floating regfile reads
system.cpu.cc_regfile_reads 27387 # number of cc regfile reads
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=false
hit_latency=1
is_read_only=true
max_miss_count=0
clusivity=mostly_excl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=12
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/arm/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/arm/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:45:42
-gem5 started Jan 21 2016 14:46:22
-gem5 executing on zizzer, pid 20738
-command line: build/ARM/gem5.opt -d build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing -re /z/atgutier/gem5/gem5-commit/tests/run.py build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing
+gem5 compiled Mar 13 2016 22:35:59
+gem5 started Mar 13 2016 22:47:14
+gem5 executing on phenom, pid 19874
+command line: build/ARM/gem5.opt -d build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/quick/se/00.hello/arm/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 18741000 # Number of ticks simulated
final_tick 18741000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 84742 # Simulator instruction rate (inst/s)
-host_op_rate 99228 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 345728368 # Simulator tick rate (ticks/s)
-host_mem_usage 266024 # Number of bytes of host memory used
-host_seconds 0.05 # Real time elapsed on the host
+host_inst_rate 9099 # Simulator instruction rate (inst/s)
+host_op_rate 10656 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 37131488 # Simulator tick rate (ticks/s)
+host_mem_usage 241712 # Number of bytes of host memory used
+host_seconds 0.50 # Real time elapsed on the host
sim_insts 4592 # Number of instructions simulated
sim_ops 5378 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 8.162674 # CPI: Total CPI of All Threads
system.cpu.ipc 0.122509 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.122509 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 6722 # number of integer regfile reads
+system.cpu.int_regfile_reads 6723 # number of integer regfile reads
system.cpu.int_regfile_writes 3755 # number of integer regfile writes
system.cpu.fp_regfile_reads 16 # number of floating regfile reads
system.cpu.cc_regfile_reads 23977 # number of cc regfile reads
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/mips/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/mips/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
warn: DRAM device capacity (8192 Mbytes) does not match the address range assigned (128 Mbytes)
warn: Sockets disabled, not accepting gdb connections
-warn: mmap failing: arguments not page-aligned: start 0x0 offset 0x7efefeff
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:17:41
-gem5 started Jan 21 2016 14:18:13
-gem5 executing on zizzer, pid 60574
-command line: build/MIPS/gem5.opt -d build/MIPS/tests/opt/quick/se/00.hello/mips/linux/o3-timing -re /z/atgutier/gem5/gem5-commit/tests/run.py build/MIPS/tests/opt/quick/se/00.hello/mips/linux/o3-timing
+gem5 compiled Mar 13 2016 22:42:39
+gem5 started Mar 13 2016 22:47:14
+gem5 executing on phenom, pid 19880
+command line: build/MIPS/gem5.opt -d build/MIPS/tests/opt/quick/se/00.hello/mips/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/MIPS/tests/opt/quick/se/00.hello/mips/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 22454000 # Number of ticks simulated
final_tick 22454000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 37869 # Simulator instruction rate (inst/s)
-host_op_rate 37861 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 170465178 # Simulator tick rate (ticks/s)
-host_mem_usage 230476 # Number of bytes of host memory used
-host_seconds 0.13 # Real time elapsed on the host
+host_inst_rate 18374 # Simulator instruction rate (inst/s)
+host_op_rate 18373 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 82737910 # Simulator tick rate (ticks/s)
+host_mem_usage 226740 # Number of bytes of host memory used
+host_seconds 0.27 # Real time elapsed on the host
sim_insts 4986 # Number of instructions simulated
sim_ops 4986 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 9.007020 # CPI: Total CPI of All Threads
system.cpu.ipc 0.111025 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.111025 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 10418 # number of integer regfile reads
+system.cpu.int_regfile_reads 10419 # number of integer regfile reads
system.cpu.int_regfile_writes 5064 # number of integer regfile writes
system.cpu.fp_regfile_reads 3 # number of floating regfile reads
system.cpu.fp_regfile_writes 1 # number of floating regfile writes
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/power/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/power/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:25:19
-gem5 started Jan 21 2016 14:25:54
-gem5 executing on zizzer, pid 3344
-command line: build/POWER/gem5.opt -d build/POWER/tests/opt/quick/se/00.hello/power/linux/o3-timing -re /z/atgutier/gem5/gem5-commit/tests/run.py build/POWER/tests/opt/quick/se/00.hello/power/linux/o3-timing
+gem5 compiled Mar 13 2016 22:44:19
+gem5 started Mar 13 2016 22:49:48
+gem5 executing on phenom, pid 19921
+command line: build/POWER/gem5.opt -d build/POWER/tests/opt/quick/se/00.hello/power/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/POWER/tests/opt/quick/se/00.hello/power/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 19923000 # Number of ticks simulated
final_tick 19923000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 47393 # Simulator instruction rate (inst/s)
-host_op_rate 47385 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 162966075 # Simulator tick rate (ticks/s)
-host_mem_usage 228528 # Number of bytes of host memory used
-host_seconds 0.12 # Real time elapsed on the host
+host_inst_rate 56421 # Simulator instruction rate (inst/s)
+host_op_rate 56413 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 194020204 # Simulator tick rate (ticks/s)
+host_mem_usage 225060 # Number of bytes of host memory used
+host_seconds 0.10 # Real time elapsed on the host
sim_insts 5792 # Number of instructions simulated
sim_ops 5792 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 6.879662 # CPI: Total CPI of All Threads
system.cpu.ipc 0.145356 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.145356 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 13451 # number of integer regfile reads
+system.cpu.int_regfile_reads 13452 # number of integer regfile reads
system.cpu.int_regfile_writes 7138 # number of integer regfile writes
system.cpu.fp_regfile_reads 25 # number of floating regfile reads
system.cpu.fp_regfile_writes 2 # number of floating regfile writes
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/x86/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/x86/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:41:03
-gem5 started Jan 21 2016 14:41:52
-gem5 executing on zizzer, pid 17884
-command line: build/X86/gem5.opt -d build/X86/tests/opt/quick/se/00.hello/x86/linux/o3-timing -re /z/atgutier/gem5/gem5-commit/tests/run.py build/X86/tests/opt/quick/se/00.hello/x86/linux/o3-timing
+gem5 compiled Mar 13 2016 22:47:14
+gem5 started Mar 13 2016 22:50:36
+gem5 executing on phenom, pid 19928
+command line: build/X86/gem5.opt -d build/X86/tests/opt/quick/se/00.hello/x86/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/X86/tests/opt/quick/se/00.hello/x86/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 20818000 # Number of ticks simulated
final_tick 20818000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 25768 # Simulator instruction rate (inst/s)
-host_op_rate 46680 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 99690963 # Simulator tick rate (ticks/s)
-host_mem_usage 249596 # Number of bytes of host memory used
-host_seconds 0.21 # Real time elapsed on the host
+host_inst_rate 39176 # Simulator instruction rate (inst/s)
+host_op_rate 70969 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 151562567 # Simulator tick rate (ticks/s)
+host_mem_usage 245924 # Number of bytes of host memory used
+host_seconds 0.14 # Real time elapsed on the host
sim_insts 5380 # Number of instructions simulated
sim_ops 9747 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 7.739219 # CPI: Total CPI of All Threads
system.cpu.ipc 0.129212 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.129212 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 20871 # number of integer regfile reads
+system.cpu.int_regfile_reads 20872 # number of integer regfile reads
system.cpu.int_regfile_writes 12651 # number of integer regfile writes
system.cpu.fp_regfile_reads 4 # number of floating regfile reads
system.cpu.cc_regfile_reads 8081 # number of cc regfile reads
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/alpha/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/alpha/linux/hello
gid=100
input=cin
kvmInSE=false
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/hello/bin/alpha/linux/hello
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/hello/bin/alpha/linux/hello
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 13:49:21
-gem5 started Jan 21 2016 13:50:00
-gem5 executing on zizzer, pid 33979
-command line: build/ALPHA/gem5.opt -d build/ALPHA/tests/opt/quick/se/01.hello-2T-smt/alpha/linux/o3-timing-mt -re /z/atgutier/gem5/gem5-commit/tests/run.py build/ALPHA/tests/opt/quick/se/01.hello-2T-smt/alpha/linux/o3-timing-mt
+gem5 compiled Mar 13 2016 22:43:13
+gem5 started Mar 13 2016 22:49:02
+gem5 executing on phenom, pid 19910
+command line: build/ALPHA/gem5.opt -d build/ALPHA/tests/opt/quick/se/01.hello-2T-smt/alpha/linux/o3-timing-mt -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ALPHA/tests/opt/quick/se/01.hello-2T-smt/alpha/linux/o3-timing-mt
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 24832500 # Number of ticks simulated
final_tick 24832500 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 30698 # Simulator instruction rate (inst/s)
-host_op_rate 30696 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 59808518 # Simulator tick rate (ticks/s)
-host_mem_usage 233400 # Number of bytes of host memory used
-host_seconds 0.42 # Real time elapsed on the host
+host_inst_rate 23208 # Simulator instruction rate (inst/s)
+host_op_rate 23207 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 45219113 # Simulator tick rate (ticks/s)
+host_mem_usage 229684 # Number of bytes of host memory used
+host_seconds 0.55 # Real time elapsed on the host
sim_insts 12744 # Number of instructions simulated
sim_ops 12744 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.ipc::0 0.128297 # IPC: Instructions Per Cycle
system.cpu.ipc::1 0.128297 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.256594 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 26491 # number of integer regfile reads
+system.cpu.int_regfile_reads 26493 # number of integer regfile reads
system.cpu.int_regfile_writes 14992 # number of integer regfile writes
system.cpu.fp_regfile_reads 16 # number of floating regfile reads
system.cpu.fp_regfile_writes 4 # number of floating regfile writes
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.cpu.toL2Bus.snoop_filter
snoop_response_latency=1
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/insttest/bin/sparc/linux/insttest
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/insttest/bin/sparc/linux/insttest
gid=100
input=cin
kvmInSE=false
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:30:54
-gem5 started Jan 21 2016 14:31:27
-gem5 executing on zizzer, pid 8740
-command line: build/SPARC/gem5.opt -d build/SPARC/tests/opt/quick/se/02.insttest/sparc/linux/o3-timing -re /z/atgutier/gem5/gem5-commit/tests/run.py build/SPARC/tests/opt/quick/se/02.insttest/sparc/linux/o3-timing
+gem5 compiled Mar 13 2016 22:35:56
+gem5 started Mar 13 2016 22:47:13
+gem5 executing on phenom, pid 19871
+command line: build/SPARC/gem5.opt -d build/SPARC/tests/opt/quick/se/02.insttest/sparc/linux/o3-timing -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/SPARC/tests/opt/quick/se/02.insttest/sparc/linux/o3-timing
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
sim_ticks 26944000 # Number of ticks simulated
final_tick 26944000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 15105 # Simulator instruction rate (inst/s)
-host_op_rate 15104 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 28190865 # Simulator tick rate (ticks/s)
-host_mem_usage 230788 # Number of bytes of host memory used
-host_seconds 0.96 # Real time elapsed on the host
+host_inst_rate 12271 # Simulator instruction rate (inst/s)
+host_op_rate 12271 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 22902062 # Simulator tick rate (ticks/s)
+host_mem_usage 227268 # Number of bytes of host memory used
+host_seconds 1.18 # Real time elapsed on the host
sim_insts 14436 # Number of instructions simulated
sim_ops 14436 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu.cpi_total 3.732959 # CPI: Total CPI of All Threads
system.cpu.ipc 0.267884 # IPC: Instructions Per Cycle
system.cpu.ipc_total 0.267884 # IPC: Total IPC of All Threads
-system.cpu.int_regfile_reads 32029 # number of integer regfile reads
+system.cpu.int_regfile_reads 32030 # number of integer regfile reads
system.cpu.int_regfile_writes 17799 # number of integer regfile writes
system.cpu.misc_regfile_reads 6992 # number of misc regfile reads
system.cpu.misc_regfile_writes 569 # number of misc regfile writes
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
errout=cerr
euid=100
eventq_index=0
-executable=/dist/m5/regression/test-progs/m5threads/bin/sparc/linux/test_atomic
+executable=/home/stever/hg/m5sim.org/gem5/tests/test-progs/m5threads/bin/sparc/linux/test_atomic
gid=100
input=cin
kvmInSE=false
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=false
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=2
is_read_only=true
max_miss_count=0
clusivity=mostly_incl
demand_mshr_reserve=1
eventq_index=0
-forward_snoops=true
hit_latency=20
is_read_only=false
max_miss_count=0
eventq_index=0
forward_latency=4
frontend_latency=3
+point_of_coherency=true
response_latency=2
snoop_filter=Null
snoop_response_latency=4
eventq_index=0
forward_latency=0
frontend_latency=1
+point_of_coherency=false
response_latency=1
snoop_filter=system.toL2Bus.snoop_filter
snoop_response_latency=1
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
-gem5 compiled Jan 21 2016 14:30:54
-gem5 started Jan 21 2016 14:31:28
-gem5 executing on zizzer, pid 8743
-command line: build/SPARC/gem5.opt -d build/SPARC/tests/opt/quick/se/40.m5threads-test-atomic/sparc/linux/o3-timing-mp -re /z/atgutier/gem5/gem5-commit/tests/run.py build/SPARC/tests/opt/quick/se/40.m5threads-test-atomic/sparc/linux/o3-timing-mp
+gem5 compiled Mar 13 2016 22:35:56
+gem5 started Mar 13 2016 22:44:20
+gem5 executing on phenom, pid 19840
+command line: build/SPARC/gem5.opt -d build/SPARC/tests/opt/quick/se/40.m5threads-test-atomic/sparc/linux/o3-timing-mp -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/SPARC/tests/opt/quick/se/40.m5threads-test-atomic/sparc/linux/o3-timing-mp
Global frequency set at 1000000000000 ticks per second
info: Entering event queue @ 0. Starting simulation...
[Iteration 1, Thread 2] Got lock
[Iteration 1, Thread 2] Critical section done, previously next=3, now next=2
Iteration 1 completed
-[Iteration 2, Thread 3] Got lock
-[Iteration 2, Thread 3] Critical section done, previously next=0, now next=3
[Iteration 2, Thread 1] Got lock
-[Iteration 2, Thread 1] Critical section done, previously next=3, now next=1
+[Iteration 2, Thread 1] Critical section done, previously next=0, now next=1
[Iteration 2, Thread 2] Got lock
[Iteration 2, Thread 2] Critical section done, previously next=1, now next=2
+[Iteration 2, Thread 3] Got lock
+[Iteration 2, Thread 3] Critical section done, previously next=2, now next=3
Iteration 2 completed
-[Iteration 3, Thread 1] Got lock
-[Iteration 3, Thread 1] Critical section done, previously next=0, now next=1
[Iteration 3, Thread 3] Got lock
-[Iteration 3, Thread 3] Critical section done, previously next=1, now next=3
+[Iteration 3, Thread 3] Critical section done, previously next=0, now next=3
[Iteration 3, Thread 2] Got lock
[Iteration 3, Thread 2] Critical section done, previously next=3, now next=2
+[Iteration 3, Thread 1] Got lock
+[Iteration 3, Thread 1] Critical section done, previously next=2, now next=1
Iteration 3 completed
[Iteration 4, Thread 2] Got lock
[Iteration 4, Thread 2] Critical section done, previously next=0, now next=2
[Iteration 4, Thread 1] Got lock
[Iteration 4, Thread 1] Critical section done, previously next=3, now next=1
Iteration 4 completed
-[Iteration 5, Thread 3] Got lock
-[Iteration 5, Thread 3] Critical section done, previously next=0, now next=3
[Iteration 5, Thread 1] Got lock
-[Iteration 5, Thread 1] Critical section done, previously next=3, now next=1
+[Iteration 5, Thread 1] Critical section done, previously next=0, now next=1
[Iteration 5, Thread 2] Got lock
[Iteration 5, Thread 2] Critical section done, previously next=1, now next=2
+[Iteration 5, Thread 3] Got lock
+[Iteration 5, Thread 3] Critical section done, previously next=2, now next=3
Iteration 5 completed
+[Iteration 6, Thread 1] Got lock
+[Iteration 6, Thread 1] Critical section done, previously next=0, now next=1
[Iteration 6, Thread 2] Got lock
-[Iteration 6, Thread 2] Critical section done, previously next=0, now next=2
+[Iteration 6, Thread 2] Critical section done, previously next=1, now next=2
[Iteration 6, Thread 3] Got lock
[Iteration 6, Thread 3] Critical section done, previously next=2, now next=3
-[Iteration 6, Thread 1] Got lock
-[Iteration 6, Thread 1] Critical section done, previously next=3, now next=1
Iteration 6 completed
+[Iteration 7, Thread 3] Got lock
+[Iteration 7, Thread 3] Critical section done, previously next=0, now next=3
[Iteration 7, Thread 2] Got lock
-[Iteration 7, Thread 2] Critical section done, previously next=0, now next=2
+[Iteration 7, Thread 2] Critical section done, previously next=3, now next=2
[Iteration 7, Thread 1] Got lock
[Iteration 7, Thread 1] Critical section done, previously next=2, now next=1
-[Iteration 7, Thread 3] Got lock
-[Iteration 7, Thread 3] Critical section done, previously next=1, now next=3
Iteration 7 completed
[Iteration 8, Thread 2] Got lock
[Iteration 8, Thread 2] Critical section done, previously next=0, now next=2
[Iteration 8, Thread 3] Got lock
[Iteration 8, Thread 3] Critical section done, previously next=1, now next=3
Iteration 8 completed
-[Iteration 9, Thread 1] Got lock
-[Iteration 9, Thread 1] Critical section done, previously next=0, now next=1
[Iteration 9, Thread 3] Got lock
-[Iteration 9, Thread 3] Critical section done, previously next=1, now next=3
+[Iteration 9, Thread 3] Critical section done, previously next=0, now next=3
+[Iteration 9, Thread 1] Got lock
+[Iteration 9, Thread 1] Critical section done, previously next=3, now next=1
[Iteration 9, Thread 2] Got lock
-[Iteration 9, Thread 2] Critical section done, previously next=3, now next=2
+[Iteration 9, Thread 2] Critical section done, previously next=1, now next=2
Iteration 9 completed
+[Iteration 10, Thread 2] Got lock
+[Iteration 10, Thread 2] Critical section done, previously next=0, now next=2
[Iteration 10, Thread 3] Got lock
-[Iteration 10, Thread 3] Critical section done, previously next=0, now next=3
+[Iteration 10, Thread 3] Critical section done, previously next=2, now next=3
[Iteration 10, Thread 1] Got lock
[Iteration 10, Thread 1] Critical section done, previously next=3, now next=1
-[Iteration 10, Thread 2] Got lock
-[Iteration 10, Thread 2] Critical section done, previously next=1, now next=2
Iteration 10 completed
PASSED :-)
-Exiting @ tick 107836000 because target called exit()
+Exiting @ tick 107700000 because target called exit()
sim_ticks 107700000 # Number of ticks simulated
final_tick 107700000 # Number of ticks from beginning of simulation (restored from checkpoints and never reset)
sim_freq 1000000000000 # Frequency of simulated ticks
-host_inst_rate 155633 # Simulator instruction rate (inst/s)
-host_op_rate 155632 # Simulator op (including micro ops) rate (op/s)
-host_tick_rate 16853882 # Simulator tick rate (ticks/s)
-host_mem_usage 312924 # Number of bytes of host memory used
-host_seconds 6.39 # Real time elapsed on the host
+host_inst_rate 68250 # Simulator instruction rate (inst/s)
+host_op_rate 68250 # Simulator op (including micro ops) rate (op/s)
+host_tick_rate 7391011 # Simulator tick rate (ticks/s)
+host_mem_usage 243816 # Number of bytes of host memory used
+host_seconds 14.57 # Real time elapsed on the host
sim_insts 994522 # Number of instructions simulated
sim_ops 994522 # Number of ops (including micro ops) simulated
system.voltage_domain.voltage 1 # Voltage in Volts
system.cpu0.cpi_total 0.566017 # CPI: Total CPI of All Threads
system.cpu0.ipc 1.766733 # IPC: Instructions Per Cycle
system.cpu0.ipc_total 1.766733 # IPC: Total IPC of All Threads
-system.cpu0.int_regfile_reads 693485 # number of integer regfile reads
+system.cpu0.int_regfile_reads 693490 # number of integer regfile reads
system.cpu0.int_regfile_writes 312678 # number of integer regfile writes
system.cpu0.fp_regfile_reads 192 # number of floating regfile reads
system.cpu0.misc_regfile_reads 225727 # number of misc regfile reads
projects / gem5.git / commitdiff