+++ /dev/null
-menuconfig BR2_TARGET_ARMLTD
- bool "ARM Ltd. Device Support"
- depends on BR2_arm
- select BR2_ARM_EABI
- select BR2_arm926t
-
-comment "ARM Ltd. based Device Support"
- depends on BR2_TARGET_ARMLTD
-
-
-if BR2_TARGET_ARMLTD
-
-choice
- prompt "Controller board"
- default BR2_TARGET_ARM_INTEGRATOR_926
- help
- ARM Ltd. Controller Board to build for
-
-config BR2_TARGET_ARM_INTEGRATOR_926
- bool "Integrator arm926"
-
-config BR2_TARGET_ARM_INTEGRATOR_926_HUGE
- bool "Integrator arm926 (Huge)"
-
-endchoice
-
-config BR2_BOARD_NAME
- string
- default "integrator926" if BR2_TARGET_ARM_INTEGRATOR_926
- default "integrator926_huge" if BR2_TARGET_ARM_INTEGRATOR_926_HUGE
-
-config BR2_BOARD_PATH
- string "Board Path"
- default "target/device/ARMLTD/$(BR2_BOARD_NAME)"
-
-endif
+++ /dev/null
-ifeq ($(BR2_TARGET_ARMLTD),y)
-BOARD_NAME=$(call qstrip,$(BR2_BOARD_NAME))
-BOARD_PATH=$(call qstrip,$(BR2_BOARD_PATH))
-endif
-
+++ /dev/null
-comment "Atmel AT91 Specific Device Support"
- depends on BR2_arm
-
-config BR2_TARGET_AT91
- bool "Board support for the Atmel AT91 range of microprocessors"
- depends on BR2_arm
- help
- Atmel AT91 ARM based systems
-
-comment "Selection criteria"
- depends on BR2_TARGET_AT91
-
-config BR2_TARGET_ATMEL_ALL
- bool "Allow all ARM targets"
- depends on BR2_TARGET_AT91
- default y
-
-config BR2_TARGET_ATMEL_NET
- bool "With network controller"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_ALL
- default y
-
-config BR2_TARGET_ATMEL_LCD
- bool "With LCD controller"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_ALL
-
-config BR2_TARGET_ATMEL_FPDSP
- bool "With Floating Point DSP"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_ALL
-
-config BR2_TARGET_ATMEL_MPB
- bool "With customizable MP-Block"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_ALL
-
-comment "Device Selection"
- depends on BR2_TARGET_AT91
-
-choice
- prompt "AT91 device"
- depends on BR2_TARGET_AT91
- default BR2_TARGET_AT91SAM9260
- help
- Select the specific AT91 chip you wish to use.
-
-config BR2_TARGET_AT91RM9200
- bool "Atmel AT91RM9200 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_LCD
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- help
- Atmel AT91RM9200 ARM based systems
-
-config BR2_TARGET_AT91SAM9260
- bool "Atmel AT91SAM9260 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_LCD
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- help
- Atmel AT91SAM9260 ARM based systems
-
-config BR2_TARGET_AT91SAM9G20
- bool "Atmel AT91SAM9G20 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_LCD
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- help
- Atmel AT91SAM9G20 ARM based systems
-
-config BR2_TARGET_AT91SAM9261
- bool "Atmel AT91SAM9261 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_NET
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- help
- Atmel AT91SAM9261 ARM based systems
-
-config BR2_TARGET_AT91SAM9261S
- bool "Atmel AT91SAM9261S Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_NET
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91SAM9261 ARM based systems (Not Yet Implemented)
-
-config BR2_TARGET_AT91SAM9RL64
- bool "Atmel AT91SAM9RL64 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_NET
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91SAM9RL64 ARM based systems (Not Yet Implemented)
-
-config BR2_TARGET_AT91SAM9263
- bool "Atmel AT91SAM9263 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- help
- Atmel AT91SAM9263 ARM based systems
-
-config BR2_TARGET_AT91SAM9G40
- bool "Atmel AT91SAM9G40 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91SAM9G40 ARM based systems
-
-config BR2_TARGET_AT91SAM9G45
- bool "Atmel AT91SAM9G45 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- help
- Atmel AT91SAM9G45 ARM based systems
-
-config BR2_TARGET_AT91SAM9M10
- bool "Atmel AT91SAM9M10 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91SAM9M10 ARM based systems
-
-config BR2_TARGET_AT91SAM9M11
- bool "Atmel AT91SAM9M11 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91SAM9M11 ARM based systems
-
-config BR2_TARGET_AT91SAM9XE
- bool "Atmel AT91SAM9XE Microprocessors"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_LCD
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91SAM9263 ARM based systems (Not Yet Implemented)
-
-config BR2_TARGET_AT572D940HF
- bool "Atmel AT572D940HF Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_LCD
- depends on !BR2_TARGET_ATMEL_MPB
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT572D940 ARM based systems
-
-config BR2_TARGET_AT91CAP9
- bool "Atmel AT91CAP9 Microprocessor"
- depends on BR2_TARGET_AT91
- depends on !BR2_TARGET_ATMEL_FPDSP
- depends on ! BR2_TARGET_AT91_ADVANCED_INFO
- help
- Atmel AT91CAP9 ARM based systems
-
-endchoice
-
-comment "Development Board Selection"
- depends on BR2_TARGET_AT91
-
-choice
- prompt "Development Board support"
- depends on BR2_TARGET_AT91
- default BR2_TARGET_AT91SAM9260DFC
- help
- Select the specific AT91 development board you wish to use.
-
-config BR2_TARGET_AT91RM9200DF
- bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support"
- depends on BR2_TARGET_AT91RM9200
- select BR2_BOOTSOURCE_DATAFLASHCARD
- help
- The Atmel AT91RM9200EK Development Board using Dataflashcard
-
-config BR2_TARGET_AT91RM9200EK
- bool "Atmel AT91RM9200EK Development Board Support"
- depends on BR2_TARGET_AT91RM9200
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_FLASH
- help
- The Atmel AT91RM9200EK Development Board
-
-config BR2_TARGET_AT91RM9200DK
- bool "Atmel AT91RM9200DK Development Board Support"
- depends on BR2_TARGET_AT91RM9200
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_FLASH
- help
- The Atmel AT91RM9200DK Development Board
-
-config BR2_TARGET_AT91SAM9260DFC
- bool "Atmel AT91SAM9260DFC"
- depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- help
- The Atmel AT91SAM9260 Development Board booting from Dataflashcard
-
-config BR2_TARGET_AT91SAM9260EK
- bool "Atmel AT91SAM9260EK"
- depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91SAM9260 Development Board booting from dataflash
-
-config BR2_TARGET_AT91SAM9G20DFC
- bool "Atmel AT91SAM9G20DFC"
- depends on BR2_TARGET_AT91SAM9G20
- select BR2_BOOTSOURCE_DATAFLASHCARD
- help
- The Atmel AT91SAM9G20 Development Board booting from Dataflashcard
-
-config BR2_TARGET_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20EK"
- depends on BR2_TARGET_AT91SAM9G20
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91SAM9G20 Development Board booting from dataflash
-
-config BR2_TARGET_AT91SAM9XEEK
- bool "Atmel AT91SAM9XE-EK"
- depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91SAM9xe Development Board (Not Yet Implemented)
-
-config BR2_TARGET_AT91SAM9261EK
- bool "Atmel AT91SAM9261EK"
- depends on BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91SAM9261 Development Board
-
-config BR2_TARGET_AT91SAM9RL64EK
- bool "Atmel AT91SAM9RL64EK"
- depends on BR2_TARGET_AT91SAM9RL64
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- select BR2_BOOTSOURCE_SDCARD
- help
- The Atmel AT91SAM9RL64 Development Board
-
-config BR2_TARGET_AT91SAM9263EK
- bool "Atmel AT91SAM9263EK"
- depends on BR2_TARGET_AT91SAM9263
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91SAM9263 Development Board
-
-config BR2_TARGET_AT91SAM9G45EKES
- bool "Atmel AT91SAM9G45EKES"
- depends on BR2_TARGET_AT91SAM9G45
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91SAM9G45 Development Board
-
-config BR2_TARGET_AT572D940DCM
- bool "Atmel AT572D940 Diopsis Computer Module"
- depends on BR2_TARGET_AT572D940HF
- select BR2_BOOTSOURCE_FLASH
- select BR2_BOOTSOURCE_SDCARD
- help
- The Atmel Diopsis CPU Module (Not Yet Implemented)
-
-config BR2_TARGET_AT91CAP9DK
- bool "Atmel AT91CAP9DK"
- depends on BR2_TARGET_AT91CAP9
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91CAP9 Development Kit (Not Yet Implemented)
-
-config BR2_TARGET_AT91CAP9ADK
- bool "Atmel AT91CAP9ADK"
- depends on BR2_TARGET_AT91CAP9
- select BR2_BOOTSOURCE_DATAFLASHCARD
- select BR2_BOOTSOURCE_DATAFLASH
- select BR2_BOOTSOURCE_NANDFLASH
- help
- The Atmel AT91CAP9 Starter Kit (Not Yet Implemented)
-
-endchoice
-
-choice
- prompt "SPI Mode"
- depends on BR2_TARGET_AT91SAM9261EK
- default BR2_TARGET_AT91SAM9261EK_SPIMODE0
- help
- Select SPI Mode 0 or 3
-
-config BR2_TARGET_AT91SAM9261EK_SPIMODE0
- bool "SPI Mode 0"
- depends on BR2_TARGET_AT91SAM9261EK
- help
- Use SPI Mode 0, Required for AT45DB642D chips
-
-config BR2_TARGET_AT91SAM9261EK_SPIMODE3
- bool "SPI Mode 3"
- depends on BR2_TARGET_AT91SAM9261EK
- help
- Use SPI Mode 3
-
-endchoice
-
-
+++ /dev/null
-comment "Atmel AVR32 Specific Device Support"
- depends on BR2_avr32
-
-config BR2_TARGET_AVR32
- bool "Board support for the Atmel AP7 microprocessors"
- depends on BR2_avr32
- help
- Atmel AT32AP7XXX AVR32 based systems
-
-choice
- prompt "AVR32 device"
- depends on BR2_TARGET_AVR32
- default BR2_TARGET_AT32AP7000
- help
- Select the specific AVR32 chip you wish to use.
-
-config BR2_TARGET_AT32AP7000
- bool "Board support for the Atmel AT32AP7000 Microprocessor"
- depends on BR2_TARGET_AVR32
- help
- Atmel AT32AP7000 AVR32 based systems
-
-config BR2_TARGET_AT32AP7001
- bool "Board support for the Atmel AT32AP7001 Microprocessor"
- depends on BR2_TARGET_AVR32
- help
- Atmel AT32AP7001 AVR32 based systems
-
-config BR2_TARGET_AT32AP7002
- bool "Board support for the Atmel AT32AP7002 Microprocessor"
- depends on BR2_TARGET_AVR32
- help
- Atmel AT32AP7002 AVR32 based systems
-
-config BR2_TARGET_AT32AP7200
- bool "Board support for the Atmel AT32AP7200 Microprocessor"
- depends on BR2_TARGET_AVR32
- help
- Atmel AT32AP7200 AVR32 based systems
-
-endchoice
-
-comment "Development board support"
- depends on BR2_TARGET_AVR32
-
-choice
- prompt "Development board support"
- depends on BR2_TARGET_AVR32
- default BR2_TARGET_AVR32_ATSTK1000
- help
- Select the specific AVR32 development board you wish to use.
-
-config BR2_TARGET_AVR32_ATSTK1002
- bool "Atmel ATSTK1000/2 AVR32 development board support"
- depends on BR2_TARGET_AT32AP7000
- select BR2_PACKAGE_LINUX
- help
- The Atmel ATSTK1000 AVR32 Development Board.
-
-config BR2_TARGET_AVR32_ATSTK1005
- bool "Atmel ATSTK1000/5 AVR32 development board support"
- depends on BR2_TARGET_AT32AP7200
- select BR2_PACKAGE_LINUX
- help
- The Atmel ATSTK1000 AVR32 Development Board,
- with the AT32AP7200 based top board
-
-config BR2_TARGET_AVR32_ATNGW100
- bool "Atmel AVR32 network gateway board support"
- depends on BR2_TARGET_AT32AP7000
- select BR2_PACKAGE_LINUX
- help
- The Atmel AVR32 Network Gateway Board.
-
-config BR2_TARGET_AVR32_ATNGW100_BASE
- bool "Atmel AVR32 basic network gateway board support"
- depends on BR2_TARGET_AT32AP7000
- select BR2_PACKAGE_LINUX
- help
- Very simple configuration for the Atmel AVR32 Network Gateway Board.
-
-endchoice
+++ /dev/null
-menuconfig BR2_TARGET_ATMEL
- bool "Atmel Device Support"
- depends on BR2_arm || BR2_avr32
-
-if BR2_TARGET_ATMEL
-
-source "target/device/Atmel/AT91_Config.in"
-source "target/device/Atmel/AVR32_Config.in"
-
-config BR2_BOARD_NAME
- string
- default "at91rm9200df" if BR2_TARGET_AT91RM9200DF
- default "at91rm9200se" if BR2_TARGET_AT91RM9200SE
- default "at91rm9200ek" if BR2_TARGET_AT91RM9200EK
- default "at91rm9200dk" if BR2_TARGET_AT91RM9200DK
- default "at91sam9260ek" if BR2_TARGET_AT91SAM9260EK
- default "at91sam9260dfc" if BR2_TARGET_AT91SAM9260DFC
- default "at91sam9261ek" if BR2_TARGET_AT91SAM9261EK
- default "at91sam9262ek" if BR2_TARGET_AT91SAM9262EK
- default "at91sam9263ek" if BR2_TARGET_AT91SAM9263EK
- default "at91sam9xeek" if BR2_TARGET_AT91SAM9XEEK
- default "at91sam9g20ek" if BR2_TARGET_AT91SAM9G20EK
- default "at91sam9g20dfc" if BR2_TARGET_AT91SAM9G20DFC
- default "at91sam9g45ekes" if BR2_TARGET_AT91SAM9G45EKES
- default "at91sam9m10ek" if BR2_TARGET_AT91SAM9M10EK
- default "at91sam9m10dfc" if BR2_TARGET_AT91SAM9M10DFC
- default "atstk100x" if BR2_TARGET_AVR32_ATSTK1002
- default "atstk1005" if BR2_TARGET_AVR32_ATSTK1005
- default "atngw100" if BR2_TARGET_AVR32_ATNGW100
- default "atngw100-base" if BR2_TARGET_AVR32_ATNGW100_BASE
- default "atngw100-expanded" if BR2_TARGET_AVR32_ATNGW100_EXPANDED
-
-config BR2_TARGET_AT91_ADVANCED_INFO
- bool "Remove work in progress"
- depends on BR2_TARGET_AT91
- default y
- help
- Atmel AT91 ARM based systems
-
-comment "Package support"
- depends on BR2_TARGET_AT91 || BR2_TARGET_AVR32
-
-
-menu "Secondary locations"
-
-config BR2_AT91_LINUXPATCH_SITE
- string "AT91 Linux Patch mirror site"
- depends on BR2_TARGET_AT91
- default "http://maxim.org.za/AT91RM9200/2.6"
- help
- Main download location for AT91 Linux stuff
-
-config BR2_BOARD_PATH
- string "Atmel board repository"
- depends on BR2_TARGET_AT91 || BR2_TARGET_AVR32
- default "target/device/Atmel/$(BR2_BOARD_NAME)"
- help
- Top directory of Atmel board configurations
-
-endmenu
-
-endif
+++ /dev/null
-# *******************************************************************
-
-ifeq ($(BR2_TARGET_ATMEL),y)
-ATMEL_PATH:=target/device/Atmel
-
-BOARD_NAME:=$(call qstrip,$(BR2_BOARD_NAME))
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-
-ATMEL_TARGET:=$(ATMEL_PATH)/root
-TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton
-TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz
-
-ifeq ($(BR2_avr32),y)
-KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2
-endif
-
-# Update things in board specific makefiles
-include target/device/Atmel/*/Makefile.in
-
-endif
+++ /dev/null
-ifeq ($(strip $(BOARD_NAME)),at91rm9200df)
-LINUX_BOARD_NAME:=at91rm9200ek
-UBOOT_BOARD_NAME:=at91rm9200df
-endif
-
-
+++ /dev/null
-ifeq ($(strip $(BOARD_NAME)),at91sam9260dfc)
-LINUX26_BOARD_NAME=at91sam9260ek
-ifeq ($(U_BOOT_VERSION),1.2.0-atmel)
-UBOOT_BOARD_NAME:=at91sam9260dfc
-else
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs1
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9260ek_nandflash
-endif
-
-endif
-
-endif
-
+++ /dev/null
-ifeq ($(BOARD_NAME),at91sam9260pf)
-LINUX26_BOARD_NAME=at91sam9260ek
-UBOOT_BOARD_NAME:=at91sam9260ek
-# Not functional for U-Boot
-# This needs to have a header file at91sam9260pf.h
-# which puts the environment in parallell flash
-endif
+++ /dev/null
-ifeq ($(strip $(BOARD_NAME)),at91sam9261ek)
-LINUX_BOARD_NAME:=at91sam9261ek
-ifeq ($(U_BOOT_VERSION),1.2.0-atmel)
-UBOOT_BOARD_NAME:=at91sam9261ek
-else
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0
-# use CS0 since we have to route CS0 to the SDcard
-# to allow boot from a card.
-# Note possible conflict with CS3 which needs to be
-# disabled both in U-Boot and in Linux
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9261ek_nandflash
-endif
-endif
-endif
+++ /dev/null
-ifeq ($(strip $(BOARD_NAME)),at91sam9263ek)
-LINUX_BOARD_NAME:=at91sam9263ek
-ifeq ($(U_BOOT_VERSION),1.2.0-atmel)
-UBOOT_BOARD_NAME:=at91sam9263ek
-else
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs1
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9263ek_nandflash
-endif
-endif
-endif
+++ /dev/null
-ifeq ($(strip $(BOARD_NAME)),at91sam9g20dfc)
-LINUX26_BOARD_NAME=at91sam9g20ek
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
-UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs0
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
-UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs1
-endif
-
-ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
-UBOOT_BOARD_NAME:=at91sam9g20ek_nandflash
-endif
-
-endif
-
+++ /dev/null
-ifeq ($(BR2_TARGET_AVR32_ATNGW100_BASE),y)
-UBOOT_BOARD_NAME:=atngw100
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
+++ /dev/null
-ifeq ($(BR2_TARGET_AVR32_ATNGW100),y)
-UBOOT_BOARD_NAME:=atngw100
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
+++ /dev/null
-ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1005)),y)
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
+++ /dev/null
-ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
-UBOOT_BOARD_NAME:=atstk1002
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-endif
+++ /dev/null
-menu "Target options"
-
-comment "Preset Devices"
-
-source "target/device/ARMLTD/Config.in"
-source "target/device/Atmel/Config.in"
-source "target/device/KwikByte/Config.in"
-source "target/device/valka/Config.in"
-source "target/device/x86/Config.in"
-source "target/device/xtensa/Config.in"
-
-# This must be last
-source "target/generic/Config.in"
-
-endmenu
+++ /dev/null
-menuconfig BR2_TARGET_KWIKBYTE
- bool "KwikByte Board Support"
- depends on BR2_arm
-
-if BR2_TARGET_KWIKBYTE
-
-comment "Board Selection"
-
-choice
- prompt "KwikByte target board"
- default BR2_TARGET_KB9202
-
-config BR2_TARGET_KB9202
- bool "Board support for the KwikByte 9202 Evaluation Board"
- depends on BR2_arm920t || BR2_generic_arm
- help
- KwikByte kb9202 Eval Board
-
-endchoice
-
-
-config BR2_BOARD_NAME
- string
- default "kb9202" if BR2_TARGET_KB9202
-choice
- prompt "Add AT91 specific patches"
- depends on BR2_KERNEL_ARCH_PATCH_ENABLED
- depends on BR2_arm
- default BR2_ARCH_AT91_2_6_24_KB if BR2_LINUX_2_6_24
-# default BR2_ARCH_AT91_2_6_24_KB if BR2_LINUX_2_6_23
-# default BR2_ARCH_AT91_2_6_22_1_KB if BR2_LINUX_2_6_22_1
-# default BR2_ARCH_AT91_2_6_21_5_KB if BR2_LINUX_2_6_21 || BR2_LINUX_2_6_21_5
-# default BR2_ARCH_AT91_2_6_21_1_KB if BR2_LINUX_2_6_21_1
-# default BR2_ARCH_AT91_2_6_20_4_KB if BR2_LINUX_2_6_20 || BR2_LINUX_2_6_20_4
-# default BR2_ARCH_AT91_2_6_24_KB
- help
- Select a patch to add to the Linux kernel
-
-config BR2_ARCH_AT91_2_6_24_KB
- bool "2.6.24"
- help
- Apply the at91 linux-2.6.24 patches"
-
-#config BR2_ARCH_AT91_2_6_22_1_KB
-# bool "2.6.22.1"
-# help
-# Apply the at91 linux-2.6.22.1 patches"
-#
-#config BR2_ARCH_AT91_2_6_21_5_KB
-# bool "2.6.21.5"
-# help
-# Apply the at91 linux-2.6.21.5 patches"
-#
-#config BR2_ARCH_AT91_2_6_21_1_KB
-# bool "2.6.21.1"
-# help
-# Apply the at91 linux-2.6.21.1 patches"
-#
-#config BR2_ARCH_AT91_2_6_20_4_KB
-# bool "2.6.20.4"
-# help
-# Apply the at91 linux-2.6.20.4 patches"
-
-endchoice
-
-config BR2_KERNEL_ARCH_PATCH_VERSION
- string
- depends on BR2_KERNEL_ARCH_PATCH_ENABLED
- depends on BR2_arm
- default "2.6.24" if BR2_ARCH_AT91_2_6_24_KB
-# default "2.6.22.1" if BR2_ARCH_AT91_2_6_22_1_KB
-# default "2.6.21.5" if BR2_ARCH_AT91_2_6_21_5_KB
-# default "2.6.21.1" if BR2_ARCH_AT91_2_6_21_1_KB
-# default "2.6.20.4" if BR2_ARCH_AT91_2_6_20_4_KB
-
-config BR2_KERNEL_ARCH_PATCH_DIR
- string
- default "target/device/Atmel/arch-arm/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
-
-config BR2_BOARD_PATH
- string "Board Path"
- default "target/device/KwikByte/$(BR2_BOARD_NAME)"
-
-config BR2_AT91_LINUXPATCH_SITE
- string "AT91 Linux Patch mirror site"
- default "http://maxim.org.za/AT91RM9200/2.6"
- help
- Main download location for AT91 Linux stuff
-
-endif
+++ /dev/null
-ifeq ($(BR2_TARGET_KWIKBYTE),y)
-
-BOARD_NAME:=$(call qstrip,$(BR2_BOARD_NAME))
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-
-ifeq ($(BR2_TARGET_KB9202),y)
-include target/device/KwikByte/kb9202/Makefile.in
-endif
-
-endif
+++ /dev/null
-BOARD_PATH=target/device/KwikByte/kb9202
-
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
+++ /dev/null
--include target/device/*/Makefile.in
-
+++ /dev/null
-menuconfig BR2_TARGET_VALKA
- bool "ValkaSys"
- depends on BR2_avr32
-
-if BR2_TARGET_VALKA
-
-choice
- prompt "Controller board"
- depends on BR2_TARGET_VALKA
- help
- Valka Controller Board to build for
-
-config BR2_TARGET_VALKA_V100SC2
- bool "V100SC2 (Based on NGW100)"
- depends on BR2_TARGET_VALKA
- help
- Board based on NGW100
-
-endchoice
-
-config BR2_BOARD_NAME
- string
- default "v100sc2" if BR2_TARGET_VALKA_V100SC2
-
-endif
+++ /dev/null
-ifeq ($(BR2_TARGET_VALKA),y)
-VALKA_PATH= target/device/valka
-
-TARGET_SKELETON=$(VALKA_PATH)/target_skeleton
-KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2
-endif
+++ /dev/null
-menuconfig BR2_TARGET_X86
- bool "Generic x86 Device Support"
- depends on BR2_i386
-
-if BR2_TARGET_X86
-
-choice
- prompt "Pentium (or later) Controller board"
- help
-
-config BR2_TARGET_I686
- bool "i686"
- depends on BR2_i386
-
-endchoice
-
-config BR2_BOARD_NAME
- string
- default "i686" if BR2_TARGET_I686
-
-config BR2_BOARD_PATH
- string "Board Path"
- default "target/device/x86/$(BR2_BOARD_NAME)"
-
-endif
-
+++ /dev/null
-ifeq ($(BR2_TARGET_X86),y)
-include target/device/x86/*/Makefile.in
-endif
-
+++ /dev/null
-BOARD_NAME=$(call qstrip,$(BR2_BOARD_NAME))
-BOARD_PATH=$(call qstrip,$(BR2_BOARD_PATH))
-
+++ /dev/null
-menuconfig BR2_TARGET_XTENSA
- bool "Device and Board Support for Xtensa and Diamond cores"
- depends on BR2_xtensa
- default y
- help
- Lists development boards with support for the Xtensa architecture.
-
-if BR2_TARGET_XTENSA
-comment "Tensilica Xtensa/Diamond based Device Support"
- depends on BR2_xtensa
-
-config BR2_TARGET_XTENSA_XTAV60
- bool "XTAV60/200 board (Avnet LX60 or LX200 plus Tensilica IP)"
- depends on BR2_xtensa
- default y
- help
- The XTAV60 or XTAV200 board, which is an Avnet LX60 or LX200
- emulation board programmed with an FPGA bitstream obtained
- from Tensilica.
-
-endif
+++ /dev/null
-ifeq ($(BR2_xtensa),y)
-
-ifeq ($(strip $(BR2_TARGET_XTENSA_XTAV60)),y)
-TARGET_SKELETON_PATCH:=target/device/xtensa
-endif
-
-endif
projects / buildroot.git / commitdiff