toradex_apalis_imx6_defconfig: *defconfig
ts4800_defconfig: *defconfig
ts4900_defconfig: *defconfig
-ts5x00_defconfig: *defconfig
+ts5500_defconfig: *defconfig
ts7680_defconfig: *defconfig
wandboard_defconfig: *defconfig
warp7_defconfig: *defconfig
--- /dev/null
+SERIAL 1 115200
+CONSOLE 0
+
+DEFAULT linux
+
+LABEL linux
+ SAY Now booting the kernel from SYSLINUX...
+ LINUX /boot/bzImage
+ APPEND console=ttyS1,115200n8 root=/dev/sda1 rootfstype=ext4 rw
--- /dev/null
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+CONFIG_MELAN=y
+CONFIG_X86_GENERIC=y
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_NOHIGHMEM=y
+# CONFIG_COMPACTION is not set
+# CONFIG_BOUNCE is not set
+# CONFIG_RELOCATABLE is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_ACPI is not set
+CONFIG_CPU_IDLE=y
+CONFIG_TS5500=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+CONFIG_NET_TULIP=y
+CONFIG_DM9102=y
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_TS5500=y
+CONFIG_SENSORS_MAX197=y
+CONFIG_WATCHDOG=y
+CONFIG_SC520_WDT=y
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+# CONFIG_VIRTUALIZATION is not set
+CONFIG_XZ_DEC=y
--- /dev/null
+Technologic Systems TS-5x00 SBCs
+================================
+
+This document explains how to set up a basic Buildroot system for the
+Technologic Systems TS-5x00 serie of x86-based Single Board Computers.
+
+TS-5x00 Single Board Computers are based on the AMD Elan520 processor. For more
+information please have a look at http://wiki.embeddedarm.com/wiki/#AMD
+
+The kernel configuration works for any AMD Elan520-based SBCs, but the support
+is enhanced for the TS-5500 and TS-5400 models (on-board devices registration
+and additional sysfs attributes under /sys/devices/platform/).
+
+To build the default configuration you only have to:
+
+ $ make ts5500_defconfig
+ $ make
+
+You will need a Compact Flash card of sufficient size and the first or only
+partition configured as Linux type, with the bootable flag.
+
+You can transfer the system on the partition then optionally resize it with:
+
+ # dd if=output/images/rootfs.ext4 of=/dev/sdX1
+ # resize2fs /dev/sdX1
+
+Or you can just extract the root filesystem to the partition with:
+
+ # mount /dev/sdX1 /mnt
+ # tar -pxf output/images/rootfs.tar -C /mnt
+ # umount /mnt
+
+To install the bootloader, you will need to copy the MBR:
+
+ # cat output/images/syslinux/mbr.bin > /dev/sdX
+
+Then install SYSLINUX in the mounted partition:
+
+ # mount /dev/sdX1 /mnt
+ # output/host/sbin/extlinux --install /mnt/boot/syslinux
+ # umount /mnt
+
+IMPORTANT: In order for the board to boot the Compact Flash with a recent
+config, the BIOS must use Logical Block Addressing (LBA). You can do it by
+choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
+Configuration" screen. Also, don't forget to set the 'active' (or 'bootable')
+flag on partition 1. For details about the CMOS setup, please see:
+http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens
+
+Connect a terminal program to the rs232 connector marked "COM2"
+with baudrate set to 115200, insert the Compact Flash card into the socket,
+power up the board, and enjoy.
+++ /dev/null
-SERIAL 1 115200
-CONSOLE 0
-
-DEFAULT linux
-
-LABEL linux
- SAY Now booting the kernel from SYSLINUX...
- LINUX /boot/bzImage
- APPEND console=ttyS1,115200n8 root=/dev/sda1 rootfstype=ext4 rw
+++ /dev/null
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_MELAN=y
-CONFIG_X86_GENERIC=y
-CONFIG_X86_REBOOTFIXUPS=y
-CONFIG_NOHIGHMEM=y
-# CONFIG_COMPACTION is not set
-# CONFIG_BOUNCE is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_ACPI is not set
-CONFIG_CPU_IDLE=y
-CONFIG_TS5500=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_BLK_DEV is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_SATA_PMP is not set
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CORE is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-CONFIG_NET_TULIP=y
-CONFIG_DM9102=y
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_TS5500=y
-CONFIG_SENSORS_MAX197=y
-CONFIG_WATCHDOG=y
-CONFIG_SC520_WDT=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_X86_PLATFORM_DEVICES is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DMIID is not set
-CONFIG_EXT4_FS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_XZ_DEC=y
+++ /dev/null
-Technologic Systems TS-5x00 SBCs
-================================
-
-This document explains how to set up a basic Buildroot system for the
-Technologic Systems TS-5x00 serie of x86-based Single Board Computers.
-
-TS-5x00 Single Board Computers are based on the AMD Elan520 processor. For more
-information please have a look at http://wiki.embeddedarm.com/wiki/#AMD
-
-The kernel configuration works for any AMD Elan520-based SBCs, but the support
-is enhanced for the TS-5500 and TS-5400 models (on-board devices registration
-and additional sysfs attributes under /sys/devices/platform/).
-
-To build the default configuration you only have to:
-
- $ make ts5x00_defconfig
- $ make
-
-You will need a Compact Flash card of sufficient size and the first or only
-partition configured as Linux type, with the bootable flag.
-
-You can transfer the system on the partition then optionally resize it with:
-
- # dd if=output/images/rootfs.ext4 of=/dev/sdX1
- # resize2fs /dev/sdX1
-
-Or you can just extract the root filesystem to the partition with:
-
- # mount /dev/sdX1 /mnt
- # tar -pxf output/images/rootfs.tar -C /mnt
- # umount /mnt
-
-To install the bootloader, you will need to copy the MBR:
-
- # cat output/images/syslinux/mbr.bin > /dev/sdX
-
-Then install SYSLINUX in the mounted partition:
-
- # mount /dev/sdX1 /mnt
- # output/host/sbin/extlinux --install /mnt/boot/syslinux
- # umount /mnt
-
-IMPORTANT: In order for the board to boot the Compact Flash with a recent
-config, the BIOS must use Logical Block Addressing (LBA). You can do it by
-choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
-Configuration" screen. Also, don't forget to set the 'active' (or 'bootable')
-flag on partition 1. For details about the CMOS setup, please see:
-http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens
-
-Connect a terminal program to the rs232 connector marked "COM2"
-with baudrate set to 115200, insert the Compact Flash card into the socket,
-power up the board, and enjoy.
--- /dev/null
+# architecture
+BR2_i386=y
+BR2_x86_i586=y
+
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
+BR2_ROOTFS_OVERLAY="board/technologic/ts5500/fs-overlay"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/technologic/ts5500/linux-4.14.config"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+# rootfs
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+
+# bootloader
+BR2_TARGET_SYSLINUX=y
+BR2_TARGET_SYSLINUX_MBR=y
+++ /dev/null
-# architecture
-BR2_i386=y
-BR2_x86_i586=y
-
-# Linux headers same as kernel, a 4.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
-
-# system
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
-BR2_ROOTFS_OVERLAY="board/technologic/ts5x00/fs-overlay"
-
-# kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/technologic/ts5x00/linux-4.14.config"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# rootfs
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-
-# bootloader
-BR2_TARGET_SYSLINUX=y
-BR2_TARGET_SYSLINUX_MBR=y
projects / buildroot.git / commitdiff