qemu/ppc-g3beige: update to use kernel 3.7.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

diff --git a/board/qemu/powerpc-g3beige/linux-3.6.config b/board/qemu/powerpc-g3beige/linux-3.6.config
deleted file mode 100644 (file)
index 098dae3..0000000
--- a/board/qemu/powerpc-g3beige/linux-3.6.config
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-CONFIG_LBDAF=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_BINFMT_ELF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PM=y
-CONFIG_SECCOMP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_YENTA=y
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_INET_LRO=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_PROC_FS=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_IEEE1394=y
-CONFIG_IEEE1394_OHCI1394=y
-CONFIG_IEEE1394_ETH1394=y
-CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_VIDEO1394=y
-CONFIG_IEEE1394_DV1394=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACE=y
-CONFIG_BMAC=y
-CONFIG_HAPPYMEAL=y
-CONFIG_SUNGEM=y
-CONFIG_CASSINI=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-CONFIG_SERIO=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SSB=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_SQUASHFS=y
-CONFIG_LIBCRC32C=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_HW=y

diff --git a/board/qemu/powerpc-g3beige/linux-3.7.config b/board/qemu/powerpc-g3beige/linux-3.7.config
new file mode 100644 (file)
index 0000000..098dae3
--- /dev/null
+++ b/board/qemu/powerpc-g3beige/linux-3.7.config
@@ -0,0 +1,86 @@
+CONFIG_ALTIVEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+CONFIG_LBDAF=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC601_SYNC_FIX=y
+CONFIG_HIGHMEM=y
+CONFIG_NO_HZ=y
+CONFIG_BINFMT_ELF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PM=y
+CONFIG_SECCOMP=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_YENTA=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_INET_LRO=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_PROC_FS=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_ETH1394=y
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=y
+CONFIG_IEEE1394_DV1394=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACE=y
+CONFIG_BMAC=y
+CONFIG_HAPPYMEAL=y
+CONFIG_SUNGEM=y
+CONFIG_CASSINI=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_SERIO=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SSB=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_SQUASHFS=y
+CONFIG_LIBCRC32C=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_CRYPTO_HW=y

diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt
index 01f0baf8e0d38e37b7ad9cdf385cfd00ae694bf1..05aa380b1bc883e80fe1aaa90c8ce85d6ddf783a 100644 (file)
--- a/board/qemu/powerpc-g3beige/readme.txt
+++ b/board/qemu/powerpc-g3beige/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.2.0
+Tested with QEMU 1.3.0

diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index 420710b94e3c85ea8792ecd9233f6a9f4196bfa1..5aef9bf3a0466402deb2b9800978548c74cc44c2 100644 (file)
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -6,15 +6,15 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 3.6 headers to avoid breaking with newer kernels
-BR2_KERNEL_HEADERS_3_6=y
+# Lock to 3.7 headers to avoid breaking with newer kernels
+BR2_KERNEL_HEADERS_3_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.6.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.7.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.6.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.7.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config