* ld.texinfo (--heap): Replace 'amount' with 'number of bytes'.
(--stack): Likewise.
2007-07-03 Matthias Klose <doko@ubuntu.com>
* emultempl/spuelf.em (base_name): Correct backslash quoting.
2007-07-02 Alan Modra <amodra@bigpond.net.au>
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* po/ld.pot: Regenerate.
2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
* aclocal.m4: Regenerated.
* Makefile.in: Likewise.
2007-06-29 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Remove a line with '*' only.
2007-06-29 Joseph Myers <joseph@codesourcery.com>
* emulparams/armelf.sh (OTHER_SECTIONS): Remove .ARM.attributes.
(ATTRS_SECTIONS): Define.
* scripttempl/elf.sc, scripttempl/elf32sh-symbian.sc,
scripttempl/elf_chaos.sc, scripttempl/elfi370.sc,
scripttempl/elfxtensa.sc: Handle ATTRS_SECTIONS.
2006-06-29 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
* scripttemp/elf32cr16.sc: Default linker script.
* emulparams/elf32cr16.sh: Emulation script.
* emultempl/cr16elf.em: Emulation script.
* Makefile.am: Add entry to make cr16 target.
* Makefile.in: Regenerate.
* configure.tgt: Specify default and other emulation parameters
for cr16.
* ChangeLog: Added CR16 target entry.
* NEWS: Announce the support for the CR16 new target.
2007-06-27 Alan Modra <amodra@bigpond.net.au>
* pe-dll.c: Rename uses of bfd.next to bfd.archive_next throughout.
2007-06-20 Alan Modra <amodra@bigpond.net.au>
* emulparams/elf32_spu.sh (OTHER_SECTIONS): KEEP .note.spu_name.
2007-06-18 Nathan Sidwell <nathan@codesourcery.com>
* ldlex.l, ldgram.y: Add ALIGNOF.
* ldexp.c (exp_print_token, foldname): Likewise.
* ld.texinfo: Likewise.
2007-06-18 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Add eelf32_spu.o rule.
* Makefile.in: Regenerate.
* emultempl/spuelf.em: Revert last change. Instead use EMBEDSPU
defined in Makefile for embedspu name.
2007-06-18 Alan Modra <amodra@bigpond.net.au>
* emultempl/spuelf.em (embedded_spu_file): Deduce embedspu program
name prefix from that of ld.
2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
* acinclude.m4: Removed.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
2007-06-14 Alan Modra <amodra@bigpond.net.au>
* emultempl/spu_ovl.S: Don't trash lr on tail call from one
overlay to another.
* emultempl/spu_ovl.o: Regenerate.
2007-06-11 Bob Wilson <bob.wilson@acm.org>
* emulparams/elf32xtensa.sh (OTHER_READONLY_SECTIONS): Add ONLY_IF_RO
for .xt_except_table.
(OTHER_RELRO_SECTIONS): New.
2007-06-11 Sterling Augustine <sterling@tensilica.com>
Bob Wilson <bob.wilson@acm.org>
* emultempl/xtensaelf.em (replace_insn_sec_with_prop_sec): Use renamed
XTENSA_PROP_NO_TRANSFORM flag instead of XTENSA_PROP_INSN_NO_TRANSFORM.
2007-06-01 Noah Misch <noah@cs.caltech.edu>
Alan Modra <amodra@bigpond.net.au>
* ldlang.c (ldlang_add_file): Use input_bfds_tail.
* ldmain.c (main): Init input_bfds_tail. Sort link_info
initialization.
2007-05-29 Alan Modra <amodra@bigpond.net.au>
* emultempl/spuelf.em (base_name): New function, split out from..
(embedded_spu_file) ..here. Pass -fPIC or -fpie to embedspu
invocation if we deduce a shared lib or position independent
executable build by looking at ctrbegin* linker input files.
2007-05-29 Alan Modra <amodra@bigpond.net.au>
* emultempl/spu_ovl.S (__rv_pattern, __cg_pattern): Set symbol
types and sizes.
* emultempl/spu_ovl.o: Regenerate.
2007-05-24 Steve Ellcey <sje@cup.hp.com>
* Makefile.in: Regnerate.
* configure: Regenerate.
* aclocal.m4: Regenerate.
2007-05-24 Nathan Sidwell <nathan@codesourcery.com>
* ldlex.l: ASSERT is recognized in SCRIPT env. NAMES cannot
contain commas in EXP env.
* ldgram.y (extern_name_list): Push to EXP env, move body to ...
(extern_name_list_body): ... here.
(script_file, ifile_list): Reformat.
(statement): Add ASSERT.
2007-05-22 Nick Clifton <nickc@redhat.com>
* ld.texinfo: Use @copying around the copyright notice.
* ldint.texinfo: Likewise.
2007-05-18 Richard Sandiford <richard@codesourcery.com>
* emulparams/elf32ebmipvxworks.sh (OTHER_READONLY_SECTIONS)
(OTHER_READWRITE_SECTIONS): Define. Add .rdata sections.
2007-05-16 Richard Sandiford <richard@codesourcery.com>
* configure.in: Allow sysroots to be relocated under $prefix as
well as $exec_prefix.
* configure: Regenerate.
2007-05-14 Andreas Schwab <schwab@suse.de>
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_new_vers_pattern):
Handle null pattern.
2007-05-11 Alan Modra <amodra@bigpond.net.au>
* emultempl/ppc32elf.em (plt_style): New variable.
(old_plt): Delete.
(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_NEW_PLT, renumber
OPTION_OLD_PLT, OPTION_OLD_GOT and OPTION_STUBSYMS.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add secure-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_NEW_PLT.
* ld.texinfo (--secure-plt): Document.
2007-05-08 Alan Modra <amodra@bigpond.net.au>
* ld.h (args_type, ld_config_type): Reorder fields.
* ldmain.c (main): Don't initialise a bunch of vars we know are
zero already.
2007-05-05 Anatoly Sokolov <aesok@post.ru>
* multempl/avrelf.em (PARSE_AND_LIST_ARGS_CASES): Add new value for
"--pmem-wrap-around".
(PARSE_AND_LIST_OPTIONS): Describe new value for "--pmem-wrap-around".
2007-05-03 Bob Wilson <bob.wilson@acm.org>
* scripttempl/elfxtensa.sc: Merge changes from elf.sc.
2007-05-03 Alan Modra <amodra@bigpond.net.au>
* ld.texinfo (--no-warn-search-mismatch): Document.
* ldfile.c (ldfile_try_open_bfd): Don't warn about skipping
incompatible libraries if --no-warn-search-mismatch.
* ld.h (args_type): Add warn_search_mismatch.
* ldmain.c (main): Init it.
* lexsup.c (enum option_values): Add OPTION_NO_WARN_SEARCH_MISMATCH.
(ld_options): Add entry for --no-warn-search-mismatch.
(parse_args): Handle OPTION_NO_WARN_SEARCH_MISMATCH.
2007-05-03 Alan Modra <amodra@bigpond.net.au>
* scripttempl/elf.sc: Add .debug_pubtypes and .debug_ranges.
2007-05-01 Robert Millan <rmh@aybabtu.com>
* ldlang.c (lang_check): Error on architecture mismatch.
2007-04-30 Alan Modra <amodra@bigpond.net.au>
* ldmain.c (link_callbacks): Init info and minfo fields.
* ldmisc.c (minfo): Do nothing if no map file.
* emultempl/spuelf.em (stack_analysis, emit_stack_syms): New vars.
(spu_after_open): Adjust spu_elf_create_sections call.
(spu_before_allocation): Likewise for spu_elf_size_stubs.
(OPTION_SPU_STACK_ANALYSIS, OPTION_SPU_STACK_SYMS): Define.
(PARSE_AND_LIST_LONGOPTS): Add new entries.
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Likewise.
* gen-doc.texi: Add @set for SPU and other missing targets.
* ld.texinfo: Update man page selection to match gen-doc.texi.
Document SPU features.
2007-04-28 Alan Modra <amodra@bigpond.net.au>
* ldcref.c (struct cref_hash_entry): Make "demangled" const.
(cref_fill_array): Adjust for changed demangler.
* ldlang.c (lang_one_common): Likewise.
2007-04-27 Nathan Froyd <froydnj@codesourcery.com>
* emulparams/elf32_sparc.sh: Update comments.
* emulparams/elf32bmip.sh: Likewise.
* emulparams/elf32ppc.sh: Likewise.
* emulparams/vxworks.sh: Likewise.
2007-04-27 Alan Modra <amodra@bigpond.net.au>
Many files: Include sysdep.h first. Remove duplicate headers.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
2007-04-24 Alan Modra <amodra@bigpond.net.au>
* Makefile.in: Regenerate.
2007-04-19 Alan Modra <amodra@bigpond.net.au>
* ldcref.c (cref_fill_array): Call bfd_demangle rather than demangle.
* ldlang.c (lang_one_common): Likewise.
* ldmisc.c (vfinfo): Likewise.
(demangle): Delete.
* ldmisc.h (demangle): Delete.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
2007-04-18 Alan Modra <amodra@bigpond.net.au>
* ldlang.h (enum section_type): Add overlay_section.
* ldlang.c (lang_add_section): Handle flags for overlay_section
as per normal_section.
(lang_size_sections_1): When setting lma, detect overlays by
os->sectype rather than by looking for overlapping vmas.
(lang_enter_overlay_section): Use overlay_section type.
(lang_leave_overlay): Set first overlay section to normal.
2007-04-14 Steve Ellcey <sje@cup.hp.com>
* Makefile.am: Add ACLOCAL_AMFLAGS.
* Makefile.in: Regenerate.
2007-04-12 Bob Wilson <bob.wilson@acm.org>
* emulparams/elf32xtensa.sh (OTHER_SECTIONS): KEEP property sections.
2007-04-10 Richard Henderson <rth@redhat.com>
* ldlang.c (relax_sections): Initialize and increment
link_info.relax_trip.
2007-04-04 Paul Brook <paul@codesourcery.com>
* configure.tgt: Loosen checks for arm uclinux eabi targets.
2007-04-02 H.J. Lu <hongjiu.lu@intel.com>
PR ld/4090
* ldexp.h (node_type): Add lineno.
* ldexp.c: Include "ldlex.h".
(exp_intop): Set the lineno field from lineno.
(exp_bigintop): Likewise.
(exp_relop): Likewise.
(exp_nameop): Likewise.
(exp_binop): Set the lineno field from lineno of lhs.
(exp_trinop): Likewise.
(exp_unop): Set the lineno field from lineno of child.
(exp_assop): Set the lineno field from lineno of src.
(exp_provide): Likewise.
(exp_assert): Set the lineno field from lineno of exp.
(exp_get_abs_int): Set lineno from lineno of nonconstant
expression when report problem.
2007-03-29 Richard Sandiford <richard@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention -l:foo.
* ld.texinfo: Document it.
* ldlang.c (new_afile): If a lang_input_file_is_l_enum
entry as a name beginning with a coloh, convert it to a
lang_input_file_is_search_file_enum entry without the colon.
2007-03-28 Richard Sandiford <richard@codesourcery.com>
* ld.h (ld_config_type): Add rpath_separator.
* ldmain.c (main): Initialize it.
* lexsup.c (parse_args): Honor config.rpath_separator.
* emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Likewise.
(gld${EMULATION_NAME}_add_sysroot): Likewise.
(gld${EMULATION_NAME}_parse_ld_so_conf): Use config.rpath_separator
rather than ':' when building the path.
* emultempl/vxworks.em (vxworks_before_parse): New function.
Override config.rpath_separator.
(LDEMUL_AFTER_OPEN): Do not change if EXTRA_EM_FILE has been
set to gld${EMULATION_NAME}_after_open; #define that identifier
to vxworks_foo instead.
(LDEMUL_BEFORE_PARSE): Override in the same way as LDEMUL_AFTER_OPEN.
2007-03-28 Richard Sandiford <richard@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* ld.texinfo: Put the contents after the title page rather
than at the end of the document.
2007-03-26 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Add dependency on ldemul-list.h for powerpc and
spu target emul files.
* configure.in: Check for mkstemp and waitpid.
* Makefile.in: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* ldlang.c (input_file_chain): Make global.
(lang_add_input_file): Don't set lang_has_input_file here.
* ldlang.h (input_file_chain): Declare.
* emultempl/ppc32elf.em (ppc_recognized_file): New function.
(LDEMUL_RECOGNIZED_FILE): Define.
* emultempl/ppc64elf.em (ppc64_recognized_file): New function.
(LDEMUL_RECOGNIZED_FILE): Define.
* emultempl/spuelf.em (struct tflist): New.
(tmp_file_list): New var.
(clean_tmp, embedded_spu_file): New functions.
2007-03-24 Alan Modra <amodra@bigpond.net.au>
* ldlang.c (lang_insert_orphan): Provide start/stop loadaddr syms
rather than defining unconditionally.
(lang_leave_overlay_section): Likewise.
* ld.texinfo (Overlay Description): Update description and examples
for start/stop syms.
2007-03-22 Joseph Myers <joseph@codesourcery.com>
* ld.texinfo: Include VERSION_PACKAGE when reporting version.
2007-03-20 Paul Brook <paul@codesourcery.com>
* emultempl/armelf.em (pic_veneer): New variable.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_PIC_VENEER.
(PARSE_AND_LIST_ARGS_CASES): Ditto.
(PARSE_AND_LIST_LONGOPTS): Add "pic-veneer".
(PARSE_AND_LIST_OPTIONS): Ditto.
* ld.texinfo: Document --pic-veneer.
2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
* ld.texinfo: Document --no-enum-size-warning.
* emultempl/armelf.em (no_enum_size_warning): New.
(arm_elf_create_output_section_statements): Correct typo
in comment. Pass no_enum_size_warning to
bfd_elf32_arm_set_target_relocs.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_NO_ENUM_SIZE_WARNING.
(PARSE_AND_LIST_OPTIONS): Document --no-enum-size-warning.
(PARSE_AND_LIST_ARGS_CASES): Add OPTION_NO_ENUM_SIZE_WARNING
case.
2007-03-19 Bernd Schmidt <bernd.schmidt@analog.com>
* configure.tgt (bfin-*-elf, bfin-*-uclinux*): Add targ_extra_libpath.
(bfin-*-linux-uclibc*): New target.
2007-03-16 Kai Tietz <Kai.Tietz@onevision.com>
* pe-dll.c (make_one): Use pc-relative relocation instead of an
absolute relocation for x86_64-pc-mingw32 target.
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ld_TEXINFOS): Remove ldver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
(ldver.texi): Likewise.
(ld.1): Don't depend on ldver.texi.
(MOSTLYCLEANFILES): Remove ldver.texi.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* lexsup.c: Include bfdver.h.
* ld.texinfo: Include bfdver.texi instead of ldver.texi.
2007-03-11 Hans-Peter Nilsson <hp@bitrange.com>
* emultempl/mmixelf.em: Remove incorrect '#line' directive.
2007-03-08 Alan Modra <amodra@bigpond.net.au>
* ldlang.c (lang_size_sections_1): Correct backwards dot move
test to not trigger on overlays. Only warn on backwards move
if non-default lma.
2007-03-07 Joseph Myers <joseph@codesourcery.com>
* configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
bug-reporting URL.
* Makefile.am (ldver.texi): Define BUGURL.
* ld.texinfo: Use BUGURL.
* Makefile.in, configure: Regenerate.
2007-03-07 Nick Clifton <nickc@redhat.com>
PR ld/4023
* emultempl/aix.em (..._before_allocation): Strip sysroot prefix
from any paths being inserted into the output binary's DT_RPATH.
2007-03-02 Nathan Sidwell <nathan@codesourcery.com>
* emulparams/shelf_uclinux.sh: New. Missed in 2007-02-28 commit.
2007-03-01 Joseph Myers <joseph@codesourcery.com>
* ldver.c (ldversion): Remove word "version" from output. Update
copyright date.
2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_uclinux.o
(eshelf_uclinux.c): New target.
* Makefile.in: Rebuilt.
* configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): New stanza.
* emulparams/shelf_uclinux.sh: New.
2007-02-28 Alan Modra <amodra@bigpond.net.au>
* configure.tgt: Fix type last change.
* configure.tgt (spu-*-elf*): Delete targ_extra_ofiles.
2007-02-27 Alan Modra <amodra@bigpond.net.au>
* Makefile.am (ALL_EMUL_EXTRA_OFILES): Remove spu_inc.o.
(eelf32_spu.c): Adjust dependencies.
* Makefile.in: Regenerate.
* emultempl/spuelf.em (ovl_mgr): New array. Insert spu_ovl.o
code using bin2c.
(_binary_spu_ovl_o_start, _binary_spu_ovl_o_end): Delete.
(ovl_mgr_stream): Update.
* emultempl/spu_inc.s: Delete.
* emultempl/spu_none.s: Delete.
2007-02-26 Alan Modra <amodra@bigpond.net.au>
* emultempl/spuelf.em (_binary_builtin_ovl_mgr_start): Rename
to _binary_spu_ovl_o_start.
(_binary_builtin_ovl_mgr_end): Rename to _binary_spu_ovl_o_end.
(spu_elf_load_ovl_mgr): Fatal error on missing overlay manager.
* emultempl/spu_inc.s: Rename symbols.
* emultempl/spu_none.s: New file.
* emultempl/spu_ovl.S: Update copyright.
* Makefile.am (spu_inc.o): Try building with ld -r first, then
gas incbin, then build without overlay manager.
* Makefile.in: Regenerate.
2007-02-22 Joseph Myers <joseph@codesourcery.com>
* configure.tgt (mips64*el-*-linux-*, mips64*-*-linux-*,
mips*el-*-linux-*, mips*-*-linux-*): Set
targ_extra_libpath=$targ_extra_emuls.
2007-02-21 Nick Clifton <nickc@redhat.com>
* ldlang.c (ldlang_override_segment_assignment): New function.
* ldlang.h (ldlang_override_segment_assignment): Prototype.
* ldmain.c (link_callbacks): Add
ldlang_override_segment_assignment.
2007-02-20 Alan Modra <amodra@bigpond.net.au>
* ldexp.c (fold_name <LOADADDR>): Ensure result is always absolute.
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* ld.h: Remove include of bin-bugs.h.
* lexsup.c (help): Don't print empty REPORT_BUGS_TO.
2007-02-17 Alan Modra <amodra@bigpond.net.au>
* ldcref.c (check_reloc_refs): Compare section for local syms.
2007-02-13 Alan Modra <amodra@bigpond.net.au>
* emultempl/spu_ovl.S (__ovly_return, __ovly_load): Set sym size.
(__ovly_load_event): Define.
(size): Rename to osize.
* emultempl/spu_ovl.o: Regenerate.
2007-02-13 Alan Modra <amodra@bigpond.net.au>
* emulparams/elf64ppc.sh (OTHER_READWRITE_SECTIONS): Add ".branch_lt".
* emultempl/ppc64elf.em (ppc_add_stub_section): Create without
SEC_RELOC flag set.
2007-02-09 H.J. Lu <hongjiu.lu@intel.com>
* configure.in (targ_extra_emuls): Add $targ64_extra_emuls if
want64 is true.
(targ_extra_libpath): Add $targ64_extra_libpath if want64 is
true
* configure: Regenerated.
* configure.tgt (targ_extra_libpath): Initialize.
(targ64_extra_emuls): New. Document. Initialize.
(targ64_extra_libpath): Likewise.
(i[3-7]86-*-linux-*): Set targ64_extra_emuls and
targ64_extra_libpath.
(powerpc*-*-linux*): Likewise.
(s390-*-linux*): Likewise.
2007-02-07 Paul Brook <paul@codesourcery.com>
* configure.tgt: Add arm*-*-uclinux-*eabi.
2007-02-06 H.J. Lu <hongjiu.lu@intel.com>
* ldlang.c (lang_size_sections_1): Add a missing `)'.
2007-02-06 Alan Modra <amodra@bigpond.net.au>
PR ld/3966
* ldlang.c (lang_size_sections_1): Don't warn on backwards dot
move unless section size is non-zero.
2007-02-05 Dave Brolley <brolley@redhat.com>
* Makefile.am (ALL_EMULATIONS): Add support for Toshiba MeP.
* configure.tgt: Likewise.
* scripttempl/mep.sc: New file.
* emulparams/elf32mep.sh: New file.
* Makefile.in: Regenerate.
2006-01-29 Julian Brown <julian@codesourcery.com>
* NEWS: Mention --vfp11-denorm-fix option.
* ld.texinfo: Document above.
* emulparams/armelf_linux.sh (OTHER_TEXT_SECTIONS): Add
.vfp11_veneer section.
* emulparams/armelf.sh (OTHER_TEXT_SECTIONS): Likewise.
* emultempl/armelf.em (vfp11_denorm_fix): New static variable.
(arm_elf_before_allocation): Call bfd_elf32_arm_set_vfp11_fix,
bfd_elf32_arm_init_maps and bfd_elf32_arm_vfp11_erratum_scan.
(arm_elf_after_allocation): New function. Call
bfd_elf32_arm_vfp11_fix_veneer_locations for all input statements.
(arm_elf_create_output_section_statements): Pass vfp11 fix command
line option to BFD.
(OPTION_VFP11_DENORM_FIX): New option.
(PARSE_AND_LIST_LONGOPTS): Handle new option.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(LDEMUL_AFTER_ALLOCATION): Define.
2007-01-24 H.J. Lu <hongjiu.lu@intel.com>
* ldgram.y (SIZEOF_HEADERS): Remove duplicated one.
(DEFSYMEND): Likewise.
(NAME): Likewise.
(LNAME): Likewise.
2007-01-19 Murali Vemulapati <murali.vemulapati@gmail.com>
* pe-dll.c: (make_one) Conditionally include jump stubs.
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Identify
redundant jump stubs from import libraries and exclude them from
link.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ld.h (args_type): Add new symbolic and dynamic_list fields.
* ld.texinfo: Update -Bsymbolic-functions.
* ldmain.c (main): Initialize command_line.symbolic to
symbolic_unset and command_line.dynamic_list to
dynamic_list_unset. Check -Bsymbolic, -Bsymbolic-functions and
--dynamic-list* before setting link_info.symbolic,
link_info.dynamic and link_info.dynamic_data.
* lexsup.c (option_values): Add OPTION_SYMBOLIC_FUNCTIONS.
(ld_options): Use OPTION_SYMBOLIC_FUNCTIONS with
-Bsymbolic-functions.
(parse_args): Handle -Bsymbolic-functions. Don't set
link_info.dynamic, link_info.dynamic_data and link_info.symbolic
here. Set command_line.symbolic for -Bsymbolic. Set
command_line.dynamic_list and command_line.symbolic for
--dynamic-list-data, --dynamic-list-cpp-new,
--dynamic-list-cpp-typeinfo and --dynamic-list.
2007-01-19 Jakub Jelinek <jakub@redhat.com>
H.J. Lu <hongjiu.lu@intel.com>
* emultempl/elf32.em (handle_option): Make sure -z max-page-size
or -z common-page-size argument is a power of 2. Call
bfd_emul_set_maxpagesize and bfd_emul_set_commonpagesize.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* ldmain.c (main): Don't call bfd_emul_set_maxpagesize nor
bfd_emul_set_commonpagesize.
2007-01-19 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention --default-script/-dT.
* ld.h (args_type): Add a default_script field.
* ld.texinfo: Document --default-script/-dT.
* ldmain.c (main): Handle command_line.default_script.
* lexsup.c (option_values): Add OPTION_DEFAULT_SCRIPT.
(ld_options): Add entries for --default-script and -dT.
(parse_args): Handle --default-script/-dT.
2007-01-16 H.J. Lu <hongjiu.lu@intel.com>
PR ld/3831
* NEWS: Mention -Bsymbolic-functions, --dynamic-list-data and
--dynamic-list-cpp-new.
* ld.texinfo: Document -Bsymbolic-functions, --dynamic-list-data
and --dynamic-list-cpp-new.
* ldlang.c (lang_append_dynamic_list_cpp_new): New.
(lang_process): Change link_info.dynamic to
link_info.dynamic_list.
(lang_append_dynamic_list): Likewise.
* ldmain.c (main): Likewise. Initialize link_info.dynamic and
link_info.dynamic_data to FALSE.
* ldlang.h (lang_append_dynamic_list_cpp_new): New.
* lexsup.c (option_values): Add OPTION_DYNAMIC_LIST_DATA and
OPTION_DYNAMIC_LIST_CPP_NEW.
(ld_options): Add entries for -Bsymbolic-functions,
--dynamic-list-data and --dynamic-list-cpp-new. Make
-Bsymbolic-functions an alias of --dynamic-list-data.
(parse_args): Change link_info.dynamic to link_info.dynamic_list.
Set link_info.dynamic to TRUE for --dynamic-list and
--dynamic-list-cpp-typeinfo. Handle --dynamic-list-data and
--dynamic-list-cpp-new.
2007-01-11 Nathan Sidwell <nathan@codesourcery.com>
* emultempl/elf-generic.em (gdl_map_segments): Only allow header
shrinkage for the first few iterations.
2007-01-08 Kai Tietz <kai.tietz@onevision.com>
* configure.tgt: Renamed target x86_64-*-mingw64 to
x86_64-*-mingw*.
2007-01-08 Pedro Alves <pedro_alves@portugalmail.pt>
* configure.host: Add i[3-7]86-*-mingw* case.
2007-01-08 Nick Clifton <nickc@redhat.com>
* pep-dll.h (pep_bfd_is_dll): Add prototype.
2007-01-08 Aurelien Jarno <aurelien@aurel32.net>
PR ld/3843
* configure.tgt (x86_64_[k]freebsd*): Add targ_extra_libpath and
tdir_elf_i386_fbsd.
2007-01-06 Nathan Sidwell <nathan@codesourcery.com>
* ldexp.c (fold_name): Issue error on undefined sections.
2007-01-02 Alan Modra <amodra@bigpond.net.au>
* pe-dll.c: Include pe-dll.h.
* pep-dll.c (pe_bfd_is_dll): Define.
For older changes see ChangeLog-2006
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
+2007-07-05 Danny Smith <dannysmith@users.sourceforge.net>
+
+ * ld.texinfo (--heap): Replace 'amount' with 'number of bytes'.
+ (--stack): Likewise.
+
2007-07-03 Matthias Klose <doko@ubuntu.com>
* emultempl/spuelf.em (base_name): Correct backslash quoting.
@kindex --heap
@item --heap @var{reserve}
@itemx --heap @var{reserve},@var{commit}
-Specify the amount of memory to reserve (and optionally commit) to be
-used as heap for this program. The default is 1Mb reserved, 4K
+Specify the number of bytes of memory to reserve (and optionally commit)
+to be used as heap for this program. The default is 1Mb reserved, 4K
committed.
[This option is specific to the i386 PE targeted port of the linker]
@kindex --stack
@item --stack @var{reserve}
@itemx --stack @var{reserve},@var{commit}
-Specify the amount of memory to reserve (and optionally commit) to be
-used as stack for this program. The default is 2Mb reserved, 4K
+Specify the number of bytes of memory to reserve (and optionally commit)
+to be used as stack for this program. The default is 2Mb reserved, 4K
committed.
[This option is specific to the i386 PE targeted port of the linker]