# Work in distributions that contain no compiler tools, like Autoconf.
tentative_cc=""
-if [ -d ${srcdir}/config ]; then
+if test -d ${srcdir}/config ; then
case "${host}" in
m68k-hp-hpux*)
# Avoid "too much defining" errors from HPUX compiler.
# If we aren't going to be using gcc, see if we can extract a definition
# of CC from the fragment.
# Actually, use the 'pre-extracted' version above.
-if [ -z "${CC}" ] && [ "${build}" = "${host}" ]; then
+if test -z "${CC}" && test "${build}" = "${host}" ; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
found=
for dir in $PATH; do
fi
done
IFS="$save_ifs"
- if [ -z "${found}" ] && [ -n "${tentative_cc}" ] ; then
+ if test -z "${found}" && test -n "${tentative_cc}" ; then
CC=$tentative_cc
fi
fi
# We default to --with-shared on platforms where -fpic is meaningless.
# Well, we don't yet, but we will.
-if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
+if false && test "${host}" = "${target}" && test x${enable_shared} = x ; then
case "${target}" in
alpha*-dec-osf*) enable_shared=yes ;;
alpha*-*-linux*) enable_shared=yes ;;
esac
rm -f mh-frag
-if [ -n "${host_makefile_frag}" ] ; then
+if test -n "${host_makefile_frag}" ; then
for f in ${host_makefile_frag}
do
cat ${srcdir}/$f >> mh-frag
is_cross_compiler=
-if [ x"${host}" = x"${target}" ] ; then
+if test x"${host}" = x"${target}" ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
skipdirs="${skipdirs} ${cross_only}"
# can reliably find it.
target_subdir=${target_alias}
-if [ ! -d ${target_subdir} ] ; then
+if test ! -d ${target_subdir} ; then
if mkdir ${target_subdir} ; then true
else
echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
build_subdir=${build_alias}
-if [ x"${build_alias}" != x"${host}" ] ; then
- if [ ! -d ${build_subdir} ] ; then
+if test x"${build_alias}" != x"${host}" ; then
+ if test ! -d ${build_subdir} ; then
if mkdir ${build_subdir} ; then true
else
echo "'*** could not make ${PWD=`pwd`}/${build_subdir}" 1>&2
# Handle --with-headers=XXX. The contents of the named directory are
# copied to $(tooldir)/sys-include.
-if [ x"${with_headers}" != x ]; then
- if [ x${is_cross_compiler} = xno ]; then
+if test x"${with_headers}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-headers is only supported when cross compiling
exit 1
fi
# Handle --with-libs=XXX. Multiple directories are permitted. The
# contents are copied to $(tooldir)/lib.
-if [ x"${with_libs}" != x ]; then
- if [ x${is_cross_compiler} = xno ]; then
+if test x"${with_libs}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-libs is only supported when cross compiling
exit 1
fi
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
-if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
- if [ x"${with_newlib}" = x ]; then
+if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+ if test x"${with_newlib}" = x ; then
with_newlib=no
fi
fi
# Recognize --with-newlib/--without-newlib.
-if [ x${with_newlib} = xno ]; then
+if test x${with_newlib} = xno ; then
skipdirs="${skipdirs} target-newlib"
-elif [ x${with_newlib} = xyes ]; then
+elif test x${with_newlib} = xyes ; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
fi
# Default to using --with-stabs for certain targets.
-if [ x${with_stabs} = x ]; then
+if test x${with_stabs} = x ; then
case "${target}" in
mips*-*-irix6*)
;;
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
-while [ $# != 0 ]; do
- if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
:
else
echo Copying $1 to $2
# Use the install script to create the directory and all required
# parent directories.
- if [ -d $2 ]; then
+ if test -d $2 ; then
:
else
echo >config.temp
;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
;;
i[3456]86-*-coff | i[3456]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
;;
m68k-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
m68k-*-coff*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
sparc-*-elf*)
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparclite-*-*)
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-sunos4*)
noconfigdirs="$noconfigdirs ${libgcj}"
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
else
use_gnu_ld=no
esac
# Make sure we don't let GNU ld be added if we didn't want it.
-if [ x$with_gnu_ld = xno ]; then
+if test x$with_gnu_ld = xno ; then
use_gnu_ld=no
noconfigdirs="$noconfigdirs ld"
fi
# Make sure we don't let GNU as be added if we didn't want it.
-if [ x$with_gnu_as = xno ]; then
+if test x$with_gnu_as = xno ; then
use_gnu_as=no
noconfigdirs="$noconfigdirs gas"
fi
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
dirname=`echo $dir | sed -e s/target-//g`
- if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if [ -r $srcdir/$dirname/configure ] \
- || [ -r $srcdir/$dirname/configure.in ]; then
+ if test -r $srcdir/$dirname/configure \
+ || test -r $srcdir/$dirname/configure.in ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
fi
fi
fi
- if [ $dir != . ] && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if [ -r $srcdir/$dirname/configure ] \
- || [ -r $srcdir/$dirname/configure.in ]; then
+ if test -r $srcdir/$dirname/configure \
+ || test -r $srcdir/$dirname/configure.in ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
# Sometimes the tools are distributed with libiberty but with no other
# libraries. In that case, we don't want to build target-libiberty.
-if [ -n "${target_configdirs}" ]; then
+if test -n "${target_configdirs}" ; then
others=
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if [ "$i" != "libiberty" ]; then
- if [ -r $srcdir/$i/configure ] || [ -r $srcdir/$i/configure.in ]; then
+ if test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
others=yes;
break;
fi
fi
done
- if [ -z "${others}" ]; then
+ if test -z "${others}" ; then
target_configdirs=
fi
fi
# Deconfigure all subdirectories, in case we are changing the
# configuration from one where a subdirectory is supported to one where it
# is not.
-if [ -z "${norecursion}" ] && [ -n "${configdirs}" ]; then
+if test -z "${norecursion}" && test -n "${configdirs}" ; then
for i in `echo ${configdirs} | sed -e s/target-//g` ; do
rm -f $i/Makefile
done
fi
-if [ -z "${norecursion}" ] && [ -n "${target_configdirs}" ]; then
+if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
rm -f ${target_subdir}/$i/Makefile
done
# FSF releases, it's important to let people know when their machine isn't
# supported by the one or two programs in a package.
-if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
# If $appdirs is non-empty, at least one of those directories must still
# be configured, or we error out. (E.g., if the gas release supports a
# specified target in some subdirs but not the gas subdir, we shouldn't
# pretend that all is well.)
- if [ -n "$appdirs" ]; then
+ if test -n "$appdirs" ; then
for dir in $appdirs ; do
- if [ -r $dir/Makefile.in ]; then
+ if test -r $dir/Makefile.in ; then
if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
appdirs=""
break
fi
fi
done
- if [ -n "$appdirs" ]; then
+ if test -n "$appdirs" ; then
echo "*** This configuration is not supported by this package." 1>&2
exit 1
fi
# want to do that, then you should use the --without-gnu-as and
# --without-gnu-ld options for the configure script.
-if [ x${use_gnu_as} = x ] ; then
- if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
+if test x${use_gnu_as} = x ; then
+ if test x${with_gnu_as} != xno && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && test -d ${srcdir}/${gasdir} ; then
with_gnu_as=yes
withoptions="$withoptions --with-gnu-as"
fi
fi
-if [ x${use_gnu_ld} = x ] ; then
- if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
+if test x${use_gnu_ld} = x ; then
+ if test x${with_gnu_ld} != xno && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && test -d ${srcdir}/ld ; then
with_gnu_ld=yes
withoptions="$withoptions --with-gnu-ld"
fi
# If using newlib, add --with-newlib to the withoptions so that gcc/configure
# can detect this case.
-if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
with_newlib=yes
withoptions="$withoptions --with-newlib"
fi
rm -f mt-frag
-if [ -n "${target_makefile_frag}" ] ; then
+if test -n "${target_makefile_frag}" ; then
for f in ${target_makefile_frag}
do
cat ${srcdir}/$f >> mt-frag
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# can be created. At this point the main configure script has set CC.
+we_are_ok=no
echo "int main () { return 0; }" > conftest.c
${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
-if [ $? = 0 ] && [ -s conftest -o -s conftest.exe ]; then
- :
-else
- echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
- echo 1>&2 "*** You must set the environment variable CC to a working compiler."
- rm -f conftest*
- exit 1
-fi
+if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ we_are_ok=yes
+ fi
+fi
+case $we_are_ok in
+ no)
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+ ;;
+esac
rm -f conftest*
# The Solaris /usr/ucb/cc compiler does not appear to work.
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
+ if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
could_use=
- [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
- if [ -d /opt/cygnus/bin ] ; then
- if [ "$could_use" = "" ] ; then
+ test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
+ if test -d /opt/cygnus/bin ; then
+ if test "$could_use" = "" ; then
could_use="/opt/cygnus/bin"
else
could_use="$could_use or /opt/cygnus/bin"
fi
fi
- if [ "$could_use" = "" ] ; then
+ if test "$could_use" = "" ; then
echo "Warning: compilation may fail because you're using"
echo "/usr/ucb/cc. You should change your PATH or CC "
echo "variable and rerun configure."
# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
# binutils tools will find libbfd.so.
-if [ "${shared}" = "yes" ]; then
+if test "${shared}" = "yes" ; then
sed -e 's/^SET_LIB_PATH[ ]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
Makefile > Makefile.tem
rm -f Makefile
# native. However, it would be better to use other mechanisms to make the
# sorts of decisions they want to make on this basis. Please consider
# this option to be deprecated. FIXME.
-if [ x${is_cross_compiler} = xyes ]; then
+if test x${is_cross_compiler} = xyes ; then
targargs="--with-cross-host=${host_alias} ${targargs}"
fi
# Default to --enable-multilib.
-if [ x${enable_multilib} = x ]; then
+if test x${enable_multilib} = x ; then
targargs="--enable-multilib ${targargs}"
fi
# Pass --with-newlib if appropriate. Note that target_configdirs has
# changed from the earlier setting of with_newlib.
-if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
targargs="--with-newlib ${targargs}"
fi
projects / binutils-gdb.git / commitdiff