arm-trusted-firmware: replace hard-coded arm64 with MKIMAGE_ARCH

We already use $(MKIMAGE_ARCH) in lots of places; use it here too.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index f353d56448dbee421c103376b66fb857c984d55d..23f493653d9be3bc1a301da1d7c62b40b9f4c76a 100644 (file)
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -81,7 +81,7 @@ define ARM_TRUSTED_FIRMWARE_BL31_UBOOT_BUILD
        BASE_ADDR=$$($(TARGET_READELF) -h $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/bl31/bl31.elf | \
                     sed -r '/^  Entry point address:\s*(.*)/!d; s//\1/') && \
        $(MKIMAGE) \
-               -A arm64 -O arm-trusted-firmware -C none \
+               -A $(MKIMAGE_ARCH) -O arm-trusted-firmware -C none \
                -a $${BASE_ADDR} -e $${BASE_ADDR} \
                -d $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/bl31.bin \
                $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/atf-uboot.ub