expressions of the form "Symbol Op Symbol" */
BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
-/* This is a 32 bit reloc that stores the 32 bit pc relative
-value in two words (with an imm instruction).No relocation is
-done here - only used for relaxing */
- BFD_RELOC_MICROBLAZE_32_NONE,
-
/* This is a 64 bit reloc that stores the 32 bit pc relative
value in two words (with an imm instruction). No relocation is
done here - only used for relaxing */
0x0000ffff, /* Dest Mask. */
false), /* PC relative offset? */
- /* This reloc does nothing. Used for relaxation. */
- HOWTO (R_MICROBLAZE_32_NONE, /* Type. */
- 0, /* Rightshift. */
- 2, /* Size (0 = byte, 1 = short, 2 = long). */
- 32, /* Bitsize. */
- true, /* PC_relative. */
- 0, /* Bitpos. */
- complain_overflow_bitfield, /* Complain on overflow. */
- NULL, /* Special Function. */
- "R_MICROBLAZE_32_NONE",/* Name. */
- false, /* Partial Inplace. */
- 0, /* Source Mask. */
- 0, /* Dest Mask. */
- false), /* PC relative offset? */
-
/* This reloc does nothing. Used for relaxation. */
HOWTO (R_MICROBLAZE_64_NONE, /* Type. */
0, /* Rightshift. */
case BFD_RELOC_NONE:
microblaze_reloc = R_MICROBLAZE_NONE;
break;
- case BFD_RELOC_MICROBLAZE_32_NONE:
- microblaze_reloc = R_MICROBLAZE_32_NONE;
- break;
case BFD_RELOC_MICROBLAZE_64_NONE:
microblaze_reloc = R_MICROBLAZE_64_NONE;
break;
}
break;
case R_MICROBLAZE_NONE:
- case R_MICROBLAZE_32_NONE:
{
/* This was a PC-relative instruction that was
completely resolved. */
size_t sfix, efix;
- unsigned int val;
bfd_vma target_address;
target_address = irel->r_addend + irel->r_offset;
sfix = calc_fixup (irel->r_offset, 0, sec);
efix = calc_fixup (target_address, 0, sec);
-
- /* Validate the in-band val. */
- val = bfd_get_32 (abfd, contents + irel->r_offset);
- if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) {
- fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend);
- }
irel->r_addend -= (efix - sfix);
/* Should use HOWTO. */
microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
irelscanend = irelocs + o->reloc_count;
for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
{
- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE)
- {
- unsigned int val;
-
- isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
-
- /* hax: We only do the following fixup for debug location lists. */
- if (strcmp(".debug_loc", o->name))
- continue;
-
- /* This was a PC-relative instruction that was completely resolved. */
- if (ocontents == NULL)
- {
- if (elf_section_data (o)->this_hdr.contents != NULL)
- ocontents = elf_section_data (o)->this_hdr.contents;
- else
- {
- /* We always cache the section contents.
- Perhaps, if info->keep_memory is FALSE, we
- should free them, if we are permitted to. */
-
- if (o->rawsize == 0)
- o->rawsize = o->size;
- ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
- if (ocontents == NULL)
- goto error_return;
- if (!bfd_get_section_contents (abfd, o, ocontents,
- (file_ptr) 0,
- o->rawsize))
- goto error_return;
- elf_section_data (o)->this_hdr.contents = ocontents;
- }
- }
-
- val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
- if (val != irelscan->r_addend) {
- fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend);
- }
-
- irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec);
- microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
- irelscan->r_addend);
- }
if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
{
isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
goto error_return;
if (!bfd_get_section_contents (abfd, o, ocontents,
(file_ptr) 0,
- o->rawsize))
+ o->rawsize))
goto error_return;
elf_section_data (o)->this_hdr.contents = ocontents;
}
elf_section_data (o)->this_hdr.contents = ocontents;
}
}
- irelscan->r_addend -= calc_fixup (irelscan->r_addend
+ irelscan->r_addend -= calc_fixup (irel->r_addend
+ isym->st_value,
0,
sec);
"BFD_RELOC_MICROBLAZE_32_ROSDA",
"BFD_RELOC_MICROBLAZE_32_RWSDA",
"BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
- "BFD_RELOC_MICROBLAZE_32_NONE",
"BFD_RELOC_MICROBLAZE_64_NONE",
"BFD_RELOC_MICROBLAZE_64_GOTPC",
"BFD_RELOC_MICROBLAZE_64_GOT",
ENUMDOC
This is a 32 bit reloc for the microblaze to handle
expressions of the form "Symbol Op Symbol"
-ENUM
- BFD_RELOC_MICROBLAZE_32_NONE
-ENUMDOC
- This is a 32 bit reloc that stores the 32 bit pc relative
- value in two words (with an imm instruction). No relocation is
- done here - only used for relaxing
ENUM
BFD_RELOC_MICROBLAZE_64_NONE
ENUMDOC
return reloc_type == 54; /* R_RISCV_SET8. */
case EM_Z80:
return reloc_type == 1; /* R_Z80_8. */
- case EM_MICROBLAZE:
- return reloc_type == 33 /* R_MICROBLAZE_32_NONE. */
- || reloc_type == 0 /* R_MICROBLAZE_NONE. */
- || reloc_type == 9; /* R_MICROBLAZE_64_NONE. */
default:
return false;
}
unsigned reg2;
unsigned reg3;
unsigned isize;
- unsigned int immed = 0, immed2 = 0, temp;
+ unsigned int immed = 0, temp;
expressionS exp;
char name[20];
inst |= (immed << IMM_LOW) & IMM5_MASK;
break;
- case INST_TYPE_RD_R1_IMM5_IMM5:
- if (strcmp (op_end, ""))
- op_end = parse_reg (op_end + 1, ®1); /* Get rd. */
- else
- {
- as_fatal (_("Error in statement syntax"));
- reg1 = 0;
- }
- if (strcmp (op_end, ""))
- op_end = parse_reg (op_end + 1, ®2); /* Get r1. */
- else
- {
- as_fatal (_("Error in statement syntax"));
- reg2 = 0;
- }
-
- /* Check for spl registers. */
- if (check_spl_reg (®1))
- as_fatal (_("Cannot use special register with this instruction"));
- if (check_spl_reg (®2))
- as_fatal (_("Cannot use special register with this instruction"));
-
- /* Width immediate value. */
- if (strcmp (op_end, ""))
- op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
- else
- as_fatal (_("Error in statement syntax"));
- if (exp.X_op != O_constant)
- {
- as_warn (_("Symbol used as immediate width value for bit field instruction"));
- immed = 1;
- }
- else
- immed = exp.X_add_number;
- if (opcode->instr == bsefi && immed > 31)
- as_fatal (_("Width value must be less than 32"));
-
- /* Shift immediate value. */
- if (strcmp (op_end, ""))
- op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
- else
- as_fatal (_("Error in statement syntax"));
- if (exp.X_op != O_constant)
- {
- as_warn (_("Symbol used as immediate shift value for bit field instruction"));
- immed2 = 0;
- }
- else
- {
- output = frag_more (isize);
- immed2 = exp.X_add_number;
- }
- if (immed2 != (immed2 % 32))
- {
- as_warn (_("Shift value greater than 32. using <value %% 32>"));
- immed2 = immed2 % 32;
- }
-
- /* Check combined value. */
- if (immed + immed2 > 32)
- as_fatal (_("Width value + shift value must not be greater than 32"));
-
- inst |= (reg1 << RD_LOW) & RD_MASK;
- inst |= (reg2 << RA_LOW) & RA_MASK;
- if (opcode->instr == bsefi)
- inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
- else
- inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
- inst |= (immed2 << IMM_LOW) & IMM5_MASK;
- break;
-
case INST_TYPE_R1_R2:
if (strcmp (op_end, ""))
op_end = parse_reg (op_end + 1, ®1); /* Get r1. */
moves code around due to relaxing. */
if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
- else if (fixP->fx_r_type == BFD_RELOC_32)
- fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
else
fixP->fx_r_type = BFD_RELOC_NONE;
fixP->fx_addsy = section_symbol (absolute_section);
- fixP->fx_done = 0;
}
return;
}
switch (fixp->fx_r_type)
{
case BFD_RELOC_NONE:
- case BFD_RELOC_MICROBLAZE_32_NONE:
case BFD_RELOC_MICROBLAZE_64_NONE:
case BFD_RELOC_32:
case BFD_RELOC_MICROBLAZE_32_LO:
RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30) /* PC-relative TEXT offset. */
RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31) /* TEXT Entry offset 64-bit. */
RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit. */
- RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33)
END_RELOC_NUMBERS (R_MICROBLAZE_max)
/* Global base address names. */
return p;
}
-static char *
-get_field_imm5width (struct string_buf *buf, long instr)
-{
- char *p = strbuf (buf);
-
- if (instr & 0x00004000)
- sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
- else
- sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
- return p;
-}
-
static char *
get_field_rfsl (struct string_buf *buf, long instr)
{
/* For mbar 16 or sleep insn. */
case INST_TYPE_NONE:
break;
- /* For bit field insns. */
- case INST_TYPE_RD_R1_IMM5_IMM5:
- print_func (stream, "\t%s, %s, %s, %s", get_field_rd (&buf, inst),get_field_r1(&buf, inst),get_field_imm5width (&buf, inst), get_field_imm5 (&buf, inst));
- break;
/* For tuqula instruction */
case INST_TYPE_RD:
print_func (stream, "\t%s", get_field_rd (&buf, inst));
/* For mbar. */
#define INST_TYPE_IMM5 20
-/* For bsefi and bsifi */
-#define INST_TYPE_RD_R1_IMM5_IMM5 21
-
#define INST_TYPE_NONE 25
#define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */
#define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */
#define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
-#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */
#define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
-#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */
#define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
#define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
#define DELAY_SLOT 1
#define NO_DELAY_SLOT 0
-#define MAX_OPCODES 301
+#define MAX_OPCODES 300
const struct op_code_struct
{
{"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
{"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
{"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
- {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
- {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
{"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
{"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
{"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
#define MIN_IMM5 ((int) 0x00000000)
#define MAX_IMM5 ((int) 0x0000001f)
-#define MIN_IMM_WIDTH ((int) 0x00000001)
-#define MAX_IMM_WIDTH ((int) 0x00000020)
-
#endif /* MICROBLAZE_OPC */
addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
mulh, mulhu, mulhsu, swapb, swaph,
idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
- ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
+ ncget, ncput, muli, bslli, bsrai, bsrli, mului,
/* 'or/and/xor' are C++ keywords. */
microblaze_or, microblaze_and, microblaze_xor,
andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
#define RB_LOW 11 /* Low bit for RB. */
#define IMM_LOW 0 /* Low bit for immediate. */
#define IMM_MBAR 21 /* low bit for mbar instruction. */
-#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
#define RD_MASK 0x03E00000
#define RA_MASK 0x001F0000
/* Imm mask for mbar. */
#define IMM5_MBAR_MASK 0x03E00000
-/* Imm mask for extract/insert width. */
-#define IMM5_WIDTH_MASK 0x000007C0
-
/* FSL imm mask for get, put instructions. */
#define RFSL_MASK 0x000000F