config BR2_STRIP_strip
bool "strip"
- depends !BR2_ENABLE_DEBUG
+ depends on !BR2_ENABLE_DEBUG
help
strip is the normal strip command
config BR2_STRIP_sstrip
bool "sstrip"
select BR2_PACKAGE_SSTRIP_HOST
- depends !BR2_ENABLE_DEBUG
+ depends on !BR2_ENABLE_DEBUG
help
sstrip is a strip that discards more than the normal strip
config BR2_PACKAGE_ARGUS
bool "argus"
default n
- depends BR2_PACKAGE_LIBPCAP
+ depends on BR2_PACKAGE_LIBPCAP
help
A Real Time Flow Monitor-based audit engine.
default n
select BR2_PACKAGE_NCURSES
select BR2_PACKAGE_ZLIB
- depends BR2_PACKAGE_OPENSSL
- depends BR2_PACKAGE_MPG123
+ depends on BR2_PACKAGE_OPENSSL
+ depends on BR2_PACKAGE_MPG123
help
Asterisk - the Open Source PBX
comment "asterisk - disabled (required openssl and mpg123)"
- depends !BR2_PACKAGE_OPENSSL || ! BR2_PACKAGE_MPG123
+ depends on !BR2_PACKAGE_OPENSSL || ! BR2_PACKAGE_MPG123
bool "atk"
select BR2_PACKAGE_PKGCONFIG
default n
- depends BR2_PACKAGE_LIBGLIB2
+ depends on BR2_PACKAGE_LIBGLIB2
help
The ATK accessibility toolkit, needed to build GTK+-2.x.
comment "atk - disabled (requires libglib2)"
- depends !BR2_PACKAGE_LIBGLIB2
+ depends on !BR2_PACKAGE_LIBGLIB2
bool "mDNS/DNS-SD daemon"
default n
depends on BR2_PACKAGE_AVAHI
- depends BR2_PACKAGE_EXPAT
+ depends on BR2_PACKAGE_EXPAT
help
The Avahi mDNS/DNS-SD daemon implementing Apple's ZeroConf
architecture (also known as "Rendezvous" or "Bonjour").
comment "mDNS/DNS-SD daemon - disabled (requires expat)"
depends on BR2_PACKAGE_AVAHI
- depends !BR2_PACKAGE_EXPAT
+ depends on !BR2_PACKAGE_EXPAT
http://blackboxwm.sourceforge.net/
comment "blackbox - disabled (requires Xorg(7))"
- depends !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
+ depends on !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
choice
prompt "BusyBox Version"
- depends BR2_PACKAGE_BUSYBOX
+ depends on BR2_PACKAGE_BUSYBOX
default BR2_BUSYBOX_VERSION_1_10_X
help
Select the version of BusyBox you wish to use.
config BR2_PACKAGE_BUSYBOX_FULLINSTALL
bool "Run BusyBox's own full installation"
- depends BR2_PACKAGE_BUSYBOX
+ depends on BR2_PACKAGE_BUSYBOX
default y
help
If you want to run BusyBox's own full install for the
config BR2_PACKAGE_BUSYBOX_CONFIG
string "BusyBox configuration file to use?"
- depends BR2_PACKAGE_BUSYBOX
+ depends on BR2_PACKAGE_BUSYBOX
default "target/device/x86/i386/busybox.config" if BR2_PACKAGE_BUSYBOX_SNAPSHOT
default "package/busybox/busybox-1.2.2.1.config" if BR2_BUSYBOX_VERSION_1_2_2_1
default "package/busybox/busybox-1.6.0.config" if BR2_BUSYBOX_VERSION_1_6_1
choice
prompt "XML library to use"
- depends BR2_PACKAGE_DBUS
+ depends on BR2_PACKAGE_DBUS
default BR2_DBUS_LIBXML2 if BR2_PACKAGE_LIBXML2
default BR2_DBUS_EXPAT
help
config BR2_PACKAGE_DHCP_SERVER
bool "dhcp server"
- depends BR2_PACKAGE_ISC_DHCP
+ depends on BR2_PACKAGE_ISC_DHCP
default n
help
DHCP server from the ISC DHCP distribution.
config BR2_PACKAGE_DHCP_RELAY
bool "dhcp relay"
- depends BR2_PACKAGE_ISC_DHCP
+ depends on BR2_PACKAGE_ISC_DHCP
default n
help
DHCP relay agent from the ISC DHCP distribution.
config BR2_PACKAGE_DHCP_CLIENT
bool "dhcp client"
- depends BR2_PACKAGE_ISC_DHCP
+ depends on BR2_PACKAGE_ISC_DHCP
default n
help
DHCP client from the ISC DHCP distribution.
config BR2_PACKAGE_DILLO
bool "dillo"
default n
- depends BR2_PACKAGE_JPEG
- depends BR2_PACKAGE_LIBGLIB12
- depends BR2_PACKAGE_LIBGTK12
- depends BR2_PACKAGE_ZLIB
- depends BR2_PACKAGE_LIBPNG
+ depends on BR2_PACKAGE_JPEG
+ depends on BR2_PACKAGE_LIBGLIB12
+ depends on BR2_PACKAGE_LIBGTK12
+ depends on BR2_PACKAGE_ZLIB
+ depends on BR2_PACKAGE_LIBPNG
depends on BR2_PACKAGE_XORG||BR2_PACKAGE_XORG7
help
Dillo is a small GTK+ based web browser written in C.
http://www.dillo.org/
comment "dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))"
- depends !BR2_PACKAGE_JPEG || !BR2_PACKAGE_LIBGLIB12 || !BR2_PACKAGE_LIBGTK12 || !BR2_PACKAGE_ZLIB || !BR2_PACKAGE_LIBPNG || !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
+ depends on !BR2_PACKAGE_JPEG || !BR2_PACKAGE_LIBGLIB12 || !BR2_PACKAGE_LIBGTK12 || !BR2_PACKAGE_ZLIB || !BR2_PACKAGE_LIBPNG || !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
config BR2_PACKAGE_VIM_RUNTIME
bool "install runtime"
default y
- depends BR2_PACKAGE_VIM
+ depends on BR2_PACKAGE_VIM
help
Install VIM runtime (syntax highlighing + macros).
This option adds about 13MB of data to /usr/share/
http://www.fltk.org/
comment "fltk - disabled (requires Xorg(7))"
- depends !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
+ depends on !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
choice
prompt "Freetype Version"
- depends BR2_PACKAGE_FREETYPE
+ depends on BR2_PACKAGE_FREETYPE
default BR2_FREETYPE_VERSION_2_2_1
help
Select the version of Freetype you wish to use.
config BR2_PACKAGE_LIBGTK2_ENGINES
bool "gtk engines"
default n
- depends BR2_PACKAGE_LIBGTK2
+ depends on BR2_PACKAGE_LIBGTK2
help
A collection of basic theme engines for GTK+.
menu "GTK Themes"
-depends BR2_PACKAGE_LIBGTK2
+depends on BR2_PACKAGE_LIBGTK2
config BR2_PACKAGE_GTK2_THEME_HICOLOR
bool "hicolor (defaut theme)"
default n
- depends BR2_PACKAGE_LIBGTK2
+ depends on BR2_PACKAGE_LIBGTK2
endmenu
config BR2_PACKAGE_IPSEC_TOOLS
bool "ipsec-tools"
default n
- depends BR2_PACKAGE_OPENSSL && BR2_PACKAGE_FLEX && BR2_PACKAGE_FLEX_LIBFL
+ depends on BR2_PACKAGE_OPENSSL && BR2_PACKAGE_FLEX && BR2_PACKAGE_FLEX_LIBFL
help
This package is required to support IPSec for Linux 2.6+
config BR2_PACKAGE_MATCHBOX_SNOTIFY
bool "Enable Matchbox Startup Notification"
- depends BR2_PACKAGE_MATCHBOX
+ depends on BR2_PACKAGE_MATCHBOX
select BR2_PACKAGE_XAPP_XSM
default n
help
config BR2_PACKAGE_MATCHBOX_PANEL
bool "Matchbox Panel"
- depends BR2_PACKAGE_MATCHBOX
+ depends on BR2_PACKAGE_MATCHBOX
default n
help
config BR2_PACKAGE_MATCHBOX_DESKTOP
bool "Matchbox Desktop"
- depends BR2_PACKAGE_MATCHBOX
+ depends on BR2_PACKAGE_MATCHBOX
default n
help
config BR2_PACKAGE_MATCHBOX_KEYBOARD
bool "Metchbox Virtual Keyboard"
- depends BR2_PACKAGE_MATCHBOX
+ depends on BR2_PACKAGE_MATCHBOX
select BR2_PACKAGE_XLIB_LIBXTST
default n
help
http://software.twotoasts.de/?page=midori
comment "midori - disabled (requires Xorg(7))"
- depends !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
+ depends on !(BR2_PACKAGE_XORG || BR2_PACKAGE_XORG7)
config BR2_PACKAGE_MODUTILS
bool "modutils"
default n
- depends !BR2_PACKAGE_MODULE_INIT_TOOLS
+ depends on !BR2_PACKAGE_MODULE_INIT_TOOLS
help
The modutils packages includes the kerneld program for automatic
loading and unloading of modules, as well as other module
endchoice
comment "MTD tools selection"
- depends BR2_PACKAGE_MTD
+ depends on BR2_PACKAGE_MTD
config BR2_PACKAGE_MTD_DOCFDISK
bool "docfdisk"
http://www.ncftp.com/ncftp/
menu "ncFTP tools selection"
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
config BR2_PACKAGE_NCFTP_GET
bool "NcFTPGet - command-line utility program"
default y
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
config BR2_PACKAGE_NCFTP_PUT
bool "NcFTPPut - command-line utility program"
default y
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
config BR2_PACKAGE_NCFTP_LS
bool "NcFTPLs - command-line utility program"
default y
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
config BR2_PACKAGE_NCFTP_BATCH
bool "NcFTPBatch - background FTP program for individual users"
default y
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
config BR2_PACKAGE_NCFTP_SPOOLER
bool "NcFTPSpooler - spooler - not working properly"
default n
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
config BR2_PACKAGE_NCFTP_BOOKMARKS
bool "NcFTPBookmarks - not working properly"
default n
- depends BR2_PACKAGE_NCFTP
+ depends on BR2_PACKAGE_NCFTP
endmenu
choice
prompt "XML Support"
default BR2_PACKAGE_NEON_NOXML
- depends BR2_PACKAGE_NEON
+ depends on BR2_PACKAGE_NEON
help
Select which XML library to use...
expat use exapt
config BR2_PACKAGE_NEON_EXPAT
bool "expat"
- depends BR2_PACKAGE_EXPAT
+ depends on BR2_PACKAGE_EXPAT
help
expat use exapt, a library for parsing XML.
config BR2_PACKAGE_NEON_LIBXML2
bool "libxml2"
- depends BR2_PACKAGE_LIBXML2
+ depends on BR2_PACKAGE_LIBXML2
help
libxml2 use libxml2, a library to read, modify and
write XML and HTML files.
depends on !BR2_INET_RPC
menu "NFS utilities selection"
- depends BR2_PACKAGE_NFS_UTILS
+ depends on BR2_PACKAGE_NFS_UTILS
config BR2_PACKAGE_NFS_UTILS_RPCDEBUG
bool "rpcdebug"
config BR2_PACKAGE_NTP_SNTP
bool "sntp"
default n
- depends BR2_PACKAGE_NTP
+ depends on BR2_PACKAGE_NTP
help
Simple network time protocol program
config BR2_PACKAGE_PCMCIA
bool "pcmcia"
default n
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
PCMCIA tools for Linux.
config BR2_PACKAGE_QTE_COMMERCIAL_USERNAME
string "Qt/E Commercial License Username"
default ""
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
help
Commercial users can download their source directly by providing a username. I do not mean this to be a political or economic statement, just a convenience function
config BR2_PACKAGE_QTE_COMMERCIAL_PASSWORD
string "Qt/E Commercial License Password"
default ""
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
help
Commercial users can download their source directly by providing a password. I do not mean this to be a political or economic statement, just a convenience function
choice
prompt "Qt/E Version"
default BR2_QTE_VERSION_2_3_11
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
help
Select the version of Qt/E you wish to use.
config BR2_PACKAGE_QTE_QVFB
bool "QVfb"
default n
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
help
Trolltech provides a Virtual Framebuffer used to simulate the embedded device during development
choice
prompt "QVfb Version"
default BR2_QTE_QVFB_VERSION_2_3_2
- depends BR2_PACKAGE_QTE_QVFB
+ depends on BR2_PACKAGE_QTE_QVFB
help
Select the version of QVfb you wish to use.
config BR2_PACKAGE_QTE_QT3
bool "Qt/E-3.3.x for Qtopia build"
default n
- depends BR2_PACKAGE_QTE_QTOPIA
+ depends on BR2_PACKAGE_QTE_QTOPIA
help
Qtopia requires a Qt/E version >= 3.3.0; when using a Qt/E-2.3.x on the runtime, Qtopia still needs a Qt/E-3.3.x codebase to build
choice
prompt "QT/E v3 Version"
default BR2_QTE_QT3_VERSION_3_3_4
- depends BR2_PACKAGE_QTE_QT3
+ depends on BR2_PACKAGE_QTE_QT3
help
Select the version of QVfb you wish to use.
config BR2_PACKAGE_QTE_QTOPIA
bool "Qtopia"
default n
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
help
Qtopia defines some more advanced components used for mobile devices
choice
prompt "Qtopia Version"
default BR2_QTE_QTOPIA_VERSION_2_1_2
- depends BR2_PACKAGE_QTE_QTOPIA
+ depends on BR2_PACKAGE_QTE_QTOPIA
help
Select the version of Qtopia you wish to use.
config BR2_QTE_TMAKE_VERSION
string
default "1.13"
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
# generated from:
# ls ~/src/buildroot/build_arm/qt-2.3.10/configs/*-static|cut -c56-|sed -e 's/-static//g'|\
choice
prompt "Qt/E Cross-Compiler Target Platform"
default BR2_QTE_CROSS_LINUX_ARM_GPP
- depends BR2_PACKAGE_QTE
+ depends on BR2_PACKAGE_QTE
help
Select the Qt cross-platform string for your build
config BR2_QTE_CROSS_CYGWIN_ARM_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-cygwin-arm-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "cygwin-arm-g++"
config BR2_QTE_CROSS_CYGWIN_IPAQ_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-cygwin-ipaq-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "cygwin-ipaq-g++"
config BR2_QTE_CROSS_CYGWIN_SHARP_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-cygwin-sharp-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "cygwin-sharp-g++"
config BR2_QTE_CROSS_FREEBSD_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-freebsd-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "freebsd-g++"
config BR2_QTE_CROSS_LINUX_ARM_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-linux-arm-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "linux-arm-g++"
config BR2_QTE_CROSS_LINUX_CASSIOPEIA_GPP
config BR2_QTE_CROSS_LINUX_KOALA_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-linux-koala-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "linux-koala-g++"
config BR2_QTE_CROSS_LINUX_MIPS_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-linux-mips-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "linux-mips-g++"
config BR2_QTE_CROSS_LINUX_SH3_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-linux-sh3-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "linux-sh3-g++"
config BR2_QTE_CROSS_LINUX_SHARP_GPP
config BR2_QTE_CROSS_QNX_RTP_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-qnx-rtp-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "qnx-rtp-g++"
config BR2_QTE_CROSS_SOLARIS_GPP
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-solaris-g++.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "solaris-g++"
config BR2_QTE_CROSS_WIN32_MSVC
# qtopia-phone does not have this platform in qtopia-phone-2.1.1/src/libraries/qtopia/custom-win32-msvc.{cpp,h}
- depends !BR2_PACKAGE_QTE_QTOPIA
+ depends on !BR2_PACKAGE_QTE_QTOPIA
bool "win32-msvc"
endchoice
config BR2_PACKAGE_QTOPIA4_DEBUG
bool "Compile with debug support"
default n
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
choice
prompt "Library type"
default BR2_PACKAGE_QTOPIA4_SHARED
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
Selects the library type: Shared or Static
choice
prompt "Qtopia 4 Core license type"
default BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
Selects the type of license you which to use for Qtopia 4 Core.
config BR2_PACKAGE_QTOPIA4_GPL_LICENSE_APPROVED
bool "Approve Qtopia Core 4 GPL licence"
default n
- depends BR2_PACKAGE_QTOPIA4 && BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL
+ depends on BR2_PACKAGE_QTOPIA4 && BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_GPL
help
Select this if you approve the GNU GENERAL PUBLIC LICENSE Version 2
on the Qtopia Core 4 library. By doing this you will not be asked
config BR2_PACKAGE_QTOPIA4_COMMERCIAL_USERNAME
string "Qtopia Core 4 Commercial License Username"
default ""
- depends BR2_PACKAGE_QTOPIA4 && BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL
+ depends on BR2_PACKAGE_QTOPIA4 && BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL
help
Commercial users can download their source directly by providing a username.
config BR2_PACKAGE_QTOPIA4_COMMERCIAL_PASSWORD
string "Qtopia Core 4 Commercial License Password"
default ""
- depends BR2_PACKAGE_QTOPIA4 && BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL
+ depends on BR2_PACKAGE_QTOPIA4 && BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL
help
Commercial users can download their source directly by providing a password.
config BR2_PACKAGE_QTOPIA4_QT3SUPPORT
bool "Compatibility with Qt3"
default y
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
Turns on support for older Qt3.
config BR2_PACKAGE_QTOPIA4_GIF
bool "Enable GIF support"
default n
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
This compiles and installs the plugin for GIF reading support.
config BR2_PACKAGE_QTOPIA4_LIBMNG
bool "Enable libmng support"
default n
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
This compiles and installs the plugin for MNG support.
choice
prompt "JPEG support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
default BR2_PACKAGE_QTOPIA4_NOJPEG
help
Select libjpeg support.
choice
prompt "PNG support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
default BR2_PACKAGE_QTOPIA4_NOPNG
help
Select which library to use if PNG support should be enabled.
choice
prompt "TIFF support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
default BR2_PACKAGE_QTOPIA4_NOTIFF
help
Select which library to use if TIFF support should be enabled.
config BR2_PACKAGE_QTOPIA4_SVG
bool "Enable SVG support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
Enable the QtSvg library.
config BR2_PACKAGE_QTOPIA4_SQL
bool "Enable SQL support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
Enable all the SQL drivers it QtSql library.
config BR2_PACKAGE_QTOPIA4_OPENSSL
bool "Enable OpenSSL support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
Enable support for the OpenSSL encryption library.
choice
prompt "zlib support"
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
default BR2_PACKAGE_QTOPIA4_QTZLIB
help
Select zlib support.
default "generic" if BR2_sh
default "generic" if BR2_sh64
default "generic" if BR2_sparc
- depends BR2_PACKAGE_QTOPIA4
+ depends on BR2_PACKAGE_QTOPIA4
help
The platform.
bool "quagga ospf6d"
default n
select BR2_PACKAGE_QUAGGA
- depends BR2_INET_IPV6
+ depends on BR2_INET_IPV6
help
routing software suite, providing implementations of
OSPFv2, OSPFv3, RIP v1 and v2, RIPng and BGP-4.
config BR2_PACKAGE_RXVT
bool "rxvt"
default n
- depends BR2_PACKAGE_XSERVER_xorg || BR2_PACKAGE_XSERVER_tinyx || BR2_PACKAGE_XSERVER_x11r7
+ depends on BR2_PACKAGE_XSERVER_xorg || BR2_PACKAGE_XSERVER_tinyx || BR2_PACKAGE_XSERVER_x11r7
help
A nice small colour vt102 X terminal emulator.
so choose only the components you need.
menu "Samba tools selection"
- depends BR2_PACKAGE_SAMBA
+ depends on BR2_PACKAGE_SAMBA
config BR2_PACKAGE_SAMBA_CIFS
bool "cifs"
http://www.libsdl.org/
menu "SDL options selection"
- depends BR2_PACKAGE_SDL
+ depends on BR2_PACKAGE_SDL
config BR2_PACKAGE_SDL_FBCON
bool "SDL framebuffer console video driver"
config BR2_PACKAGE_SYNERGY
bool "synergy"
default n
- depends BR2_PACKAGE_XORG7
+ depends on BR2_PACKAGE_XORG7
help
Synergy lets you easily share a single mouse and
keyboard between multiple computers with different
config BR2_PACKAGE_TCL_DEL_ENCODINGS
bool "delete encodings (saves 1.4Mb)"
default y
- depends BR2_PACKAGE_TCL
+ depends on BR2_PACKAGE_TCL
help
Delete encoding files for TCL. If your programs do not use various tcl
character recoding functions, you may safely choose Y here.
config BR2_PACKAGE_TCL_SHLIB_ONLY
bool "install only shared library"
default y
- depends BR2_PACKAGE_TCL
+ depends on BR2_PACKAGE_TCL
help
Install only TCL shared library and not binary tcl interpreter(tclsh8.4).
Saves ~14kb.
to your filesystem.
menu "Extra udev tools"
- depends BR2_PACKAGE_UDEV
+ depends on BR2_PACKAGE_UDEV
config BR2_PACKAGE_UDEV_VOLUME_ID
bool "udev-libvolume_id"
config BR2_PACKAGE_VALGRIND
bool "valgrind"
default n
- depends BR2_i386 || BR2_powerpc || BR2_x86_64
+ depends on BR2_i386 || BR2_powerpc || BR2_x86_64
help
Tool for debugging and profiling Linux programs.
config BR2_PACKAGE_VPNC
bool "vpnc"
- depends BR2_PACKAGE_LIBGCRYPT
- depends BR2_PACKAGE_LIBGPG_ERROR
+ depends on BR2_PACKAGE_LIBGCRYPT
+ depends on BR2_PACKAGE_LIBGPG_ERROR
default n
help
Client for Cisco VPN concentrator
http://www.unix-ag.uni-kl.de/~massar/vpnc
comment "vpnc - disabled (requires libgcrypt and libgpg_error)"
- depends !BR2_PACKAGE_LIBGCRYPT || !BR2_PACKAGE_LIBGPG_ERROR
+ depends on !BR2_PACKAGE_LIBGCRYPT || !BR2_PACKAGE_LIBGPG_ERROR
config BR2_PACKAGE_WEBIF_INSTALL_INDEX_HTML
bool "instal index.html in /www which redirects to webif"
- depends BR2_PACKAGE_WEBIF
+ depends on BR2_PACKAGE_WEBIF
default n
help
Installs a /www/index.html which redirects to the status console cgi
config BR2_PACKAGE_WEBIF_LANGUAGES
bool "install language support"
- depends BR2_PACKAGE_WEBIF
+ depends on BR2_PACKAGE_WEBIF
default n
help
This option installs support for other languages than english.
config BR2_PACKAGE_XDATA_XKBDATA
bool "xkbdata"
default n
- depends !BR2_PACKAGE_XKEYBOARD_CONFIG
+ depends on !BR2_PACKAGE_XKEYBOARD_CONFIG
help
xkbdata 1.0.1
No description available
config BR2_PACKAGE_XORG
- depends BR2_DEPRECATED
+ depends on BR2_DEPRECATED
bool "X.org X Window System"
default y if BR2_PACKAGE_XSERVER_xorg
select BR2_PACKAGE_ZLIB
#
choice
prompt "Target Architecture Variant"
- depends BR2_arm || BR2_armeb
+ depends on BR2_arm || BR2_armeb
default BR2_generic_arm
help
Specific CPU variant to use
choice
prompt "Target ABI"
- depends BR2_arm || BR2_armeb
+ depends on BR2_arm || BR2_armeb
default BR2_ARM_OABI
help
Application Binary Interface to use
choice
prompt "Target Architecture Variant"
- depends BR2_mips || BR2_mipsel
+ depends on BR2_mips || BR2_mipsel
default BR2_mips_3 if BR2_mips
default BR2_mips_1 if BR2_mipsel
help
choice
prompt "Target ABI"
- depends BR2_mips || BR2_mipsel
+ depends on BR2_mips || BR2_mipsel
default BR2_MIPS_OABI32 if BR_mips_32 || BR_mips_32r2
default BR2_MIPS_ABI32 if BR_mips_64 || BR_mips_64r2
help
bool "o32"
config BR2_MIPS_ABI32
bool "n32"
- depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
+ depends on BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
config BR2_MIPS_EABI
bool "eabi"
- depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
+ depends on BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
config BR2_MIPS_ABI64
bool "n64"
- depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
+ depends on BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
config BR2_MIPS_OABI64
bool "o64"
- depends BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
+ depends on BR2_mips_3 || BR2_mips_4 || BR2_mips_64 || BR2_mips_64r2 || BR2_mips_16
config BR2_MIPS_ABI_none
bool "unspecified"
- depends BR2_mips_16
+ depends on BR2_mips_16
help
Unspecified ABI leaves ABI selection blank.
endchoice
choice
prompt "Target Architecture Variant"
- depends BR2_avr32
+ depends on BR2_avr32
config BR2_at32ap7000
bool "AT32AP7000"
config BR2_at32ap7001
choice
prompt "Target Architecture Variant"
- depends BR2_sh
+ depends on BR2_sh
default BR2_sh4
help
Specific CPU variant to use
#
choice
prompt "Target Architecture Variant"
- depends BR2_i386
+ depends on BR2_i386
default BR2_x86_i386
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_x86_64
+ depends on BR2_x86_64
default BR2_x86_64_core2
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_alpha
+ depends on BR2_alpha
default BR2_alpha_21064
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_s390
+ depends on BR2_s390
default BR2_s390_g5
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_sparc
+ depends on BR2_sparc
default BR2_sparc_v7
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_sparc64
+ depends on BR2_sparc64
default BR2_sparc64_v9
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_ia64
+ depends on BR2_ia64
default BR2_ia64_itanium2
help
Specific CPU variant to use
choice
prompt "Target Architecture Variant"
- depends BR2_powerpc
+ depends on BR2_powerpc
default BR2_generic_powerpc
help
Specific CPU variant to use
comment "AMD Specific Device Support"
- depends BR2_mipsel || BR2_mips
+ depends on BR2_mipsel || BR2_mips
config BR2_TARGET_AMD_ALCHEMY
bool "Board support for the AMD development boards"
- depends BR2_mipsel || BR2_mips
+ depends on BR2_mipsel || BR2_mips
default n
help
AMD Alchemy mips based systems
config BR2_TARGET_AMD_ALCHEMY_DBAU1500
bool "AMD Alchemy DBAu1500 Development Board Support"
default n
- depends BR2_TARGET_AMD_ALCHEMY
+ depends on BR2_TARGET_AMD_ALCHEMY
select BR2_PACKAGE_LINUX
help
The AMD Alchemy DBAu1500 Development Board
comment "Package support"
- depends BR2_TARGET_AMD_ALCHEMY
+ depends on BR2_TARGET_AMD_ALCHEMY
menuconfig BR2_TARGET_ARMLTD
bool "ARM Ltd. Device Support"
- depends BR2_arm
+ depends on BR2_arm
default n
comment "Arm based Device Support"
- depends BR2_arm && BR2_TARGET_ARMLTD
+ depends on BR2_arm && BR2_TARGET_ARMLTD
config BR2_TARGET_ARM_INTEGRATOR_926
bool "Integrator arm926"
- depends BR2_arm && BR2_TARGET_ARMLTD
+ depends on BR2_arm && BR2_TARGET_ARMLTD
default y
select BR2_PACKAGE_LINUX
select BR2_ARM_EABI
comment "Atmel AT91 Specific Device Support"
- depends BR2_arm
+ depends on BR2_arm
config BR2_TARGET_AT91
bool "Board support for the Atmel AT91 range of microprocessors"
- depends BR2_arm
+ depends on BR2_arm
default n
help
Atmel AT91 ARM based systems
config BR2_TARGET_ATMEL_ALL
bool "Allow all ARM targets"
- depends BR2_arm
+ depends on BR2_arm
default y
config BR2_TARGET_ATMEL_NET
choice
prompt "AT91 device"
- depends BR2_TARGET_AT91
+ depends on BR2_TARGET_AT91
default BR2_TARGET_AT91SAM9260
help
Select the specific AT91 chip you wish to use.
config BR2_TARGET_AT91RM9200
bool "Atmel AT91RM9200 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_LCD
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_LCD
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
help
Atmel AT91RM9200 ARM based systems
config BR2_TARGET_AT91SAM9260
bool "Atmel AT91SAM9260 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_LCD
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_LCD
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
help
Atmel AT91SAM9260 ARM based systems
config BR2_TARGET_AT91SAM9G20
bool "Atmel AT91SAM9G20 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_LCD
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_LCD
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9G20 ARM based systems (Not Yet Implemented)
config BR2_TARGET_AT91SAM9261
bool "Atmel AT91SAM9261 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_NET
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_NET
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
help
Atmel AT91SAM9261 ARM based systems
config BR2_TARGET_AT91SAM9261S
bool "Atmel AT91SAM9261S Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_NET
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_NET
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9261 ARM based systems (Not Yet Implemented)
config BR2_TARGET_AT91SAM9RL64
bool "Atmel AT91SAM9RL64 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_NET
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_NET
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9RL64 ARM based systems (Not Yet Implemented)
config BR2_TARGET_AT91SAM9263
bool "Atmel AT91SAM9263 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
help
Atmel AT91SAM9263 ARM based systems
config BR2_TARGET_AT91SAM9G41
bool "Atmel AT91SAM9G41 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9G41 ARM based systems
config BR2_TARGET_AT91SAM9M10
bool "Atmel AT91SAM9M10 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9M10 ARM based systems
config BR2_TARGET_AT91SAM9M11
bool "Atmel AT91SAM9M11 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9M11 ARM based systems
config BR2_TARGET_AT91SAM9XE
bool "Atmel AT91SAM9XE Microprocessors"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_LCD
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_LCD
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91SAM9263 ARM based systems (Not Yet Implemented)
config BR2_TARGET_AT572D940HF
bool "Atmel AT572D940HF Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_LCD
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_LCD
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT572D940 ARM based systems
config BR2_TARGET_AT91CAP9
bool "Atmel AT91CAP9 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_FPDSP
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel AT91CAP9 ARM based systems
config BR2_TARGET_AT91SAM9262
bool "Atmel ATR0663 Microprocessor"
- depends BR2_TARGET_AT91
- depends !BR2_TARGET_ATMEL_FPDSP
- depends !BR2_TARGET_ATMEL_MPB
- depends ! BR2_TARGET_AT91_ADVANCED_INFO
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_ATMEL_FPDSP
+ depends on !BR2_TARGET_ATMEL_MPB
+ depends on ! BR2_TARGET_AT91_ADVANCED_INFO
help
Atmel ATR0663 ARM based systems (Not Yet Implemented)
choice
prompt "Development Board support"
- depends BR2_TARGET_AT91
+ depends on BR2_TARGET_AT91
default BR2_TARGET_AT91SAM9260DFC
help
Select the specific AT91 development board you wish to use.
config BR2_TARGET_AT91RM9200DF
bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support"
- depends BR2_TARGET_AT91RM9200
+ depends on BR2_TARGET_AT91RM9200
help
The Atmel AT91RM9200EK Development Board using Dataflashcard
config BR2_TARGET_AT91RM9200SE
bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support (SE)"
- depends BR2_TARGET_AT91RM9200
+ depends on BR2_TARGET_AT91RM9200
help
The Atmel AT91RM9200EK Development Board using Dataflashcard (SE)
config BR2_TARGET_AT91RM9200EK
bool "Atmel AT91RM9200EK Development Board Support"
- depends BR2_TARGET_AT91RM9200
+ depends on BR2_TARGET_AT91RM9200
help
The Atmel AT91RM9200EK Development Board
config BR2_TARGET_AT91RM9200DK
bool "Atmel AT91RM9200DK Development Board Support"
- depends BR2_TARGET_AT91RM9200
+ depends on BR2_TARGET_AT91RM9200
help
The Atmel AT91RM9200DK Development Board
config BR2_TARGET_AT91SAM9260DFC
bool "Atmel AT91SAM9260DFC"
- depends BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9G20 || BR2_TARGET_AT91SAM9XE
+ depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9G20 || BR2_TARGET_AT91SAM9XE
help
The Atmel AT91SAM9260 Development Board booting from Dataflashcard
config BR2_TARGET_AT91SAM9260EK
bool "Atmel AT91SAM9260EK"
- depends BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9G20 || BR2_TARGET_AT91SAM9XE
+ depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9G20 || BR2_TARGET_AT91SAM9XE
help
The Atmel AT91SAM9260 Development Board booting from dataflash
config BR2_TARGET_AT91SAM9XEEK
bool "Atmel AT91SAM9XE-EK"
- depends BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9G20 || BR2_TARGET_AT91SAM9XE
+ depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9G20 || BR2_TARGET_AT91SAM9XE
help
The Atmel AT91SAM9xe Development Board (Not Yet Implemented)
config BR2_TARGET_AT91SAM9261EK
bool "Atmel AT91SAM9261EK"
- depends BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S
+ depends on BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S
help
The Atmel AT91SAM9261 Development Board
config BR2_TARGET_AT91SAM9RL64EK
bool "Atmel AT91SAM9RL64EK"
- depends BR2_TARGET_AT91SAM9RL64
+ depends on BR2_TARGET_AT91SAM9RL64
help
The Atmel AT91SAM9RL64 Development Board
config BR2_TARGET_AT91SAM9262EK
bool "Atmel AT91SAM9262EK"
- depends BR2_TARGET_AT91SAM9262
+ depends on BR2_TARGET_AT91SAM9262
help
The Atmel AT91SAM9262 Development Board (Not Yet Implemented)
config BR2_TARGET_AT91SAM9263EK
bool "Atmel AT91SAM9263EK"
- depends BR2_TARGET_AT91SAM9263
+ depends on BR2_TARGET_AT91SAM9263
help
The Atmel AT91SAM9263 Development Board (Not Yet Implemented)
config BR2_TARGET_AT572D940DCM
bool "Atmel AT572D940 Diopsis Computer Module"
- depends BR2_TARGET_AT572D940HF
+ depends on BR2_TARGET_AT572D940HF
help
The Atmel Diopsis CPU Module (Not Yet Implemented)
config BR2_TARGET_AT91CAP9DK
bool "Atmel AT91CAP9DK"
- depends BR2_TARGET_AT91CAP9
+ depends on BR2_TARGET_AT91CAP9
help
The Atmel AT91CAP9 Development Kit (Not Yet Implemented)
config BR2_TARGET_AT91CAP9STK
bool "Atmel AT91CAP9STK"
- depends BR2_TARGET_AT91CAP9
+ depends on BR2_TARGET_AT91CAP9
help
The Atmel AT91CAP9 Starter Kit (Not Yet Implemented)
choice
prompt "SPI Mode"
- depends BR2_TARGET_AT91SAM9261EK
+ depends on BR2_TARGET_AT91SAM9261EK
default BR2_TARGET_AT91SAM9261EK_SPIMODE0
help
Select SPI Mode 0 or 3
config BR2_TARGET_AT91SAM9261EK_SPIMODE0
bool "SPI Mode 0"
- depends BR2_TARGET_AT91SAM9261EK
+ depends on BR2_TARGET_AT91SAM9261EK
help
Use SPI Mode 0, Required for AT45DB642D chips
config BR2_TARGET_AT91SAM9261EK_SPIMODE3
bool "SPI Mode 3"
- depends BR2_TARGET_AT91SAM9261EK
+ depends on BR2_TARGET_AT91SAM9261EK
help
Use SPI Mode 3
comment "Atmel AVR32 Specific Device Support"
- depends BR2_avr32
+ depends on BR2_avr32
config BR2_TARGET_AVR32
bool "Board support for the Atmel AP7 microprocessors"
- depends BR2_avr32
+ depends on BR2_avr32
default n
help
Atmel AT32AP7XXX AVR32 based systems
choice
prompt "AVR32 device"
- depends BR2_TARGET_AVR32
+ depends on BR2_TARGET_AVR32
default BR2_TARGET_AT32AP7000
help
Select the specific AVR32 chip you wish to use.
config BR2_TARGET_AT32AP7000
bool "Board support for the Atmel AT32AP7000 Microprocessor"
- depends BR2_TARGET_AVR32
+ depends on BR2_TARGET_AVR32
help
Atmel AT32AP7000 AVR32 based systems
config BR2_TARGET_AT32AP7001
bool "Board support for the Atmel AT32AP7001 Microprocessor"
- depends BR2_TARGET_AVR32
+ depends on BR2_TARGET_AVR32
help
Atmel AT32AP7001 AVR32 based systems
config BR2_TARGET_AT32AP7002
bool "Board support for the Atmel AT32AP7002 Microprocessor"
- depends BR2_TARGET_AVR32
+ depends on BR2_TARGET_AVR32
help
Atmel AT32AP7002 AVR32 based systems
endchoice
comment "Development board support"
- depends BR2_TARGET_AVR32
+ depends on BR2_TARGET_AVR32
choice
prompt "Development board support"
- depends BR2_TARGET_AVR32
+ depends on BR2_TARGET_AVR32
default BR2_TARGET_AVR32_ATSTK1000
help
Select the specific AVR32 development board you wish to use.
config BR2_TARGET_AVR32_ATSTK1002
bool "Atmel ATSTK1000/2 AVR32 development board support"
- depends BR2_TARGET_AT32AP7000
+ depends on BR2_TARGET_AT32AP7000
select BR2_PACKAGE_LINUX
help
The Atmel ATSTK1000 AVR32 Development Board.
config BR2_TARGET_AVR32_ATNGW100
bool "Atmel AVR32 network gateway board support"
- depends BR2_TARGET_AT32AP7000
+ depends on BR2_TARGET_AT32AP7000
select BR2_PACKAGE_LINUX
help
The Atmel AVR32 Network Gateway Board.
config BR2_TARGET_AVR32_ATNGW100_BASE
bool "Atmel AVR32 basic network gateway board support"
- depends BR2_TARGET_AT32AP7000
+ depends on BR2_TARGET_AT32AP7000
select BR2_PACKAGE_LINUX
help
Very simple configuration for the Atmel AVR32 Network Gateway Board.
config BR2_TARGET_AVR32_ATNGW100_EXPANDED
bool "Atmel AVR32 expanded network gateway board support"
- depends BR2_TARGET_AT32AP7000
+ depends on BR2_TARGET_AT32AP7000
select BR2_PACKAGE_LINUX
help
The Atmel AVR32 Network Gateway Board expanded to include audio, video, and PS/2.
config BR2_TARGET_AT91_ADVANCED_INFO
bool "Remove work in progress"
- depends BR2_TARGET_AT91
+ depends on BR2_TARGET_AT91
default y
help
Atmel AT91 ARM based systems
default "0x32000" if BR2_TARGET_AT91BOOT_DATAFLASH || BR2_TARGET_AT91BOOT_DATAFLASHCARD
default "0x30000" if BR2_TARGET_AT91BOOT_NANDFLASH
default "0x100000" if BR2_TARGET_AT91BOOT_FLASH
- depends BR2_TARGET_AT91BOOTSTRAP
+ depends on BR2_TARGET_AT91BOOTSTRAP
help
Select the size of your application
AT91 Bootstrap will copy this amount from flash to SDRAM
comment "Hitachi ULSI Systems device support"
- depends BR2_sh
+ depends on BR2_sh
config BR2_TARGET_HITACHI_SE
bool "Board support for Solution Engine development boards"
config BR2_TARGET_HITACHI_MS7206SE01
bool "MS7206SE01 development board support"
- depends BR2_TARGET_HITACHI_SE && BR2_sh2a_nofpueb
+ depends on BR2_TARGET_HITACHI_SE && BR2_sh2a_nofpueb
default n
if BR2_TARGET_SHARP
comment "Sharp Specific Device Support"
- depends BR2_arm
+ depends on BR2_arm
config BR2_TARGET_SHARP_LNODE80
bool "Board support for the LNode80 development board"
- depends BR2_arm
+ depends on BR2_arm
default n
help
Support for the LNode80 LH79520 based device
menuconfig BR2_TARGET_SOEKRIS
bool "Soekris device support"
- depends BR2_i386
+ depends on BR2_i386
default n
if BR2_TARGET_SOEKRIS
config BR2_TARGET_SOEKRIS_NET4801
bool "Soekris net4801"
- depends BR2_i386
+ depends on BR2_i386
default n
select BR2_PACKAGE_LINUX
help
config BR2_TARGET_VIA_EPIA_MII
bool "EPIA MII"
- depends BR2_i386
+ depends on BR2_i386
default n
select BR2_PACKAGE_LINUX
help
config BR2_TARGET_Q5
bool "jp-embedded Q5 board support"
default n
- depends BR2_mipsel
+ depends on BR2_mipsel
select BR2_PACKAGE_LINUX
help
jp-embedded Q5 series MIPS based boards, see http://www.jp-embedded.com for further information.
comment "Package support"
- depends BR2_TARGET_Q5
+ depends on BR2_TARGET_Q5
choice
prompt "Controller board"
- depends BR2_TARGET_VALKA
+ depends on BR2_TARGET_VALKA
help
Valka Controller Board to build for
config BR2_TARGET_VALKA_V100SC2
bool "V100SC2 (Based on NGW100)"
- depends BR2_TARGET_VALKA
+ depends on BR2_TARGET_VALKA
help
Board based on NGW100
comment "Generic x86 Device Support"
- depends BR2_i386
+ depends on BR2_i386
comment "Package support"
- depends BR2_TARGET_AMD_ALCHEMY
+ depends on BR2_TARGET_AMD_ALCHEMY
config BR2_PACKAGE_LINUX_USE_DEFCONFIG
bool "Run make <board>_defconfig "
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Configure Linux by make <board>_defconfig
config BR2_PACKAGE_LINUX_USE_XCONFIG
bool "Run make ARCH=$(ARCH) [xconfig|menuconfig] before build"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Configure Linux by make xconfig
endchoice
config BR2_LINUX_BIN_BZIMAGE
bool "bzImage"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.19.2
config BR2_LINUX_BIN_UIMAGE
bool "uImage"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Build uImage binary
config BR2_LINUX_BIN_VMLINUX
bool "vmlinux"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Build vmlinux binary
config BR2_LINUX_BIN_ZIMAGE
bool "zImage"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.19.2
config BR2_LINUX_BIN_CUSTOM
bool "<custom> Linux binary"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Build custom Linux binary format
endchoice
config BR2_LINUX_COPYTO_ROOTFS
bool "Copy kernel to root file system"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
default n
help
Copy kernel to <root>/boot directory
config BR2_LINUX_2_6_SNAP
bool "The latest snapshot for the stable Linux kernel"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.x-git#
config BR2_LINUX_2_6_MM
bool "With latest -mm patch for the stable Linux kernel"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.x-rc#-mm#
config BR2_LINUX_2_6_STABLE
bool "The latest stable Linux kernel (2.6.22.1)"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.22.1
config BR2_LINUX_2_6_22_10
bool "Linux 2.6.22.10"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.22.10
config BR2_LINUX_2_6_22_1
bool "Linux 2.6.22.1"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.22.1
config BR2_LINUX_2_6_22
bool "Linux 2.6.22"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.22
config BR2_LINUX_2_6_21_6
bool "Linux 2.6.21.6"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.21.6
config BR2_LINUX_2_6_21_1
bool "Linux 2.6.21.1"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.21.1
config BR2_LINUX_2_6_21
bool "Linux 2.6.21"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.21
config BR2_LINUX_2_6_20_4
bool "Linux 2.6.20.4"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.20.4
config BR2_LINUX_2_6_20
bool "Linux 2.6.20"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.20
config BR2_LINUX_2_6_19_2
bool "Linux 2.6.19.2"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.19.2
config BR2_LINUX_2_6_19
bool "Linux 2.6.19"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.19
config BR2_LINUX_2_6_18
bool "Linux 2.6.18"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.18
config BR2_LINUX_2_6_17
bool "Linux 2.6.17"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.17
config BR2_LINUX_2_6_16
bool "Linux 2.6.16"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.16
config BR2_LINUX_2_6_15
bool "Linux 2.6.15"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.15
config BR2_LINUX_2_6_23
bool "Linux 2.6.23"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.23
config BR2_LINUX_CUSTOM
bool "Linux <custom> version"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux <your selection>
config BR2_LINUX26_DEFCONFIG
bool "Run make <board>_defconfig "
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Configure Linux by make <board>_defconfig
config BR2_LINUX_CUSTOMIZE
bool "Run make ARCH=$(ARCH) xconfig before build"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Configure Linux by make xconfig
endchoice
config BR2_LINUX_BIN_BZIMAGE
bool "bzImage"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.19.2
config BR2_LINUX_BIN_UIMAGE
bool "uImage"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Build uImage binary
config BR2_LINUX_BIN_VMLINUX
bool "vmlinux"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Build vmlinux binary
config BR2_LINUX_BIN_ZIMAGE
bool "zImage"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Linux 2.6.19.2
config BR2_LINUX_BIN_CUSTOM
bool "<custom> Linux binary"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
help
Build custom Linux binary format
endchoice
config BR2_LINUX_IN_ROOTFS
bool "Copy kernel to root file system"
- depends BR2_PACKAGE_LINUX
+ depends on BR2_PACKAGE_LINUX
default n
help
Copy kernel to <root>/boot directory
config BR2_LINUX_COPYTO
string "also copy the image to..."
- depends BR2_LINUX_COPY
+ depends on BR2_LINUX_COPY
default "/tftpboot"
help
Copy kernel to secondary location
Select the version of binutils you wish to use.
config BR2_BINUTILS_VERSION_2_17
- depends BR2_avr32 || !BR2_nios2 && BR2_DEPRECATED
- depends BR2_EXT_BINUTILS_VERSION_2_17
+ depends on BR2_avr32 || !BR2_nios2 && BR2_DEPRECATED
+ depends on BR2_EXT_BINUTILS_VERSION_2_17
bool "binutils 2.17"
config BR2_BINUTILS_VERSION_2_17_50_0_17
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "binutils 2.17.50.0.17"
config BR2_BINUTILS_VERSION_2_18
- depends !BR2_avr32 && !BR2_nios2
+ depends on !BR2_avr32 && !BR2_nios2
bool "binutils 2.18"
config BR2_BINUTILS_VERSION_2_18_50_0_1
- depends !BR2_avr32 && !BR2_nios2
+ depends on !BR2_avr32 && !BR2_nios2
bool "binutils 2.18.50.0.1"
endchoice
bool "gcc 4.3.1"
# config BR2_GCC_VERSION_4_3
-# depends !BR2_avr32 && !BR2_nios2
+# depends on !BR2_avr32 && !BR2_nios2
# select BR2_GCC_IS_SNAP
# bool "gcc 4.3"
endchoice
linux-2.6.tar.bz2 tarball in your download dir.
config BR2_KERNEL_HEADERS_2_4_25
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.4.25 kernel headers"
config BR2_KERNEL_HEADERS_2_4_27
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.4.27 kernel headers"
config BR2_KERNEL_HEADERS_2_4_29
- depends !BR2_avr32 && !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.4.29 kernel headers"
config BR2_KERNEL_HEADERS_2_4_31
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.4.31 kernel headers"
config BR2_KERNEL_HEADERS_2_6_9
- depends !BR2_avr32 && BR2_DEPRECATED
+ depends on !BR2_avr32 && BR2_DEPRECATED
bool "Linux 2.6.9 kernel headers"
config BR2_KERNEL_HEADERS_2_6_11
- depends !BR2_avr32 && BR2_DEPRECATED
+ depends on !BR2_avr32 && BR2_DEPRECATED
bool "Linux 2.6.11 kernel headers"
config BR2_KERNEL_HEADERS_2_6_12
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.12 kernel headers"
config BR2_KERNEL_HEADERS_2_6_20_4
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.20.4 kernel headers"
config BR2_KERNEL_HEADERS_2_6_20
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.20.x kernel headers"
config BR2_KERNEL_HEADERS_2_6_21_5
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.21.5 kernel headers"
config BR2_KERNEL_HEADERS_2_6_21
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.21.x kernel headers"
config BR2_KERNEL_HEADERS_2_6_22_1
- depends !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_avr32 && !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.22.1 kernel headers"
config BR2_KERNEL_HEADERS_2_6_22_10
- depends !BR2_nios2 && BR2_DEPRECATED
+ depends on !BR2_nios2 && BR2_DEPRECATED
bool "Linux 2.6.22.10 kernel headers"
config BR2_KERNEL_HEADERS_2_6_22
- depends BR2_DEPRECATED
+ depends on BR2_DEPRECATED
bool "Linux 2.6.22.x kernel headers"
config BR2_KERNEL_HEADERS_2_6_23
- depends BR2_DEPRECATED
+ depends on BR2_DEPRECATED
bool "Linux 2.6.23.x kernel headers"
config BR2_KERNEL_HEADERS_2_6_24
- depends BR2_RECENT
+ depends on BR2_RECENT
bool "Linux 2.6.24.x kernel headers"
config BR2_KERNEL_HEADERS_2_6_25
config BR2_KERNEL_HEADERS_IPMI
bool "use ipmi kernel patches"
default n
- depends BR2_KERNEL_HEADERS_2_6_20_4 || BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1
+ depends on BR2_KERNEL_HEADERS_2_6_20_4 || BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1
help
Apply patches which add IPMI sensor support.
config BR2_KERNEL_HEADERS_LZMA
bool "use lzma initramfs kernel patches"
default n
- depends BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1
+ depends on BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1
help
Apply patches which allow for lzma compressed
initramfs filesystems. This requires the lzma
config BR2_KERNEL_HEADERS_RT
bool "use realtime (-rt) kernel patches"
default n
- depends BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1
+ depends on BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1
help
Apply Ingo's realtime extensions to linux
config BR2_KERNEL_HEADERS_PATCH_DIR
bool "Add additional headers from $(KERNEL_HEADERS_PATCH_DIR)"
default n
- depends BR2_KERNEL_HEADERS_2_6_20_4 || BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1 || BR2_KERNEL_HEADERS_2_6_22_10
+ depends on BR2_KERNEL_HEADERS_2_6_20_4 || BR2_KERNEL_HEADERS_2_6_21_5 || BR2_KERNEL_HEADERS_2_6_22_1 || BR2_KERNEL_HEADERS_2_6_22_10
help
Apply additional kernel patches defined by KERNEL_HEADERS_PATCH_DIR
in your board directory.
Select the version of uClibc you wish to use.
config BR2_UCLIBC_VERSION_0_9_28_3
- depends BR2_DEPRECATED
+ depends on BR2_DEPRECATED
bool "uClibc 0.9.28.3"
- depends BR2_EXT_UCLIBC_VERSION_0_9_28_3
+ depends on BR2_EXT_UCLIBC_VERSION_0_9_28_3
config BR2_UCLIBC_VERSION_0_9_29
bool "uClibc 0.9.29"
- depends BR2_EXT_UCLIBC_VERSION_0_9_29
+ depends on BR2_EXT_UCLIBC_VERSION_0_9_29
config BR2_UCLIBC_VERSION_SNAPSHOT
bool "daily snapshot"
projects / buildroot.git / commitdiff