INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
TDEFINES = @TDEFINES@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
AC_SUBST($1)])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13.1"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:572: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_host_alias=$host
- case "$ac_cv_host_alias" in
- NONE)
- case $nonopt in
- NONE)
- if ac_cv_host_alias=`$ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) ac_cv_host_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
- ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:613: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_target_alias=$target
- case "$ac_cv_target_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_target_alias=$host_alias ;;
-
- *) ac_cv_target_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
- ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:653: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_build_alias=$build
- case "$ac_cv_build_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_build_alias=$host_alias ;;
-
- *) ac_cv_build_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
- ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:609: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:630: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:648: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:720: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:673: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:750: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:703: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:801: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:754: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:833: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:786: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 844 "configure"
+#line 797 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:875: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:828: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:880: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:833: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:889: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:908: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:861: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:940: checking for POSIXized ISC" >&5
+echo "configure:893: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:973: checking for a BSD compatible install" >&5
+echo "configure:926: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1030: checking whether build environment is sane" >&5
+echo "configure:979: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},;$program_transform_name"
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1087: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1036: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1133: checking for working aclocal" >&5
+echo "configure:1082: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1146: checking for working autoconf" >&5
+echo "configure:1095: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1159: checking for working automake" >&5
+echo "configure:1108: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1172: checking for working autoheader" >&5
+echo "configure:1121: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1185: checking for working makeinfo" >&5
+echo "configure:1134: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1208: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AR+set}\" = set"; then
+echo "configure:1157: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$AR"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1240: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1189: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1272: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1221: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1378: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1327: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1417: checking for ld used by GCC" >&5
+echo "configure:1366: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1441: checking for GNU ld" >&5
+echo "configure:1390: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1444: checking for non-GNU ld" >&5
+echo "configure:1393: checking for non-GNU ld" >&5
fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1480: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1428: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1496: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1444: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1534: checking command to parse $NM output" >&5
-if eval "test \"\${ac_cv_sys_global_symbol_pipe+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1601: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1699: checking for _ prefix in compiled symbols" >&5
-if eval "test \"\${ac_cv_sys_symbol_underscore+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1711: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1737: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1480: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1773 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1529 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1795: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1551: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1800 "configure"
+#line 1556 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1830: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1862: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1897: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1929: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},;$program_transform_name"
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2130: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1735: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:2153: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:1758: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2158 "configure"
+#line 1763 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:2169: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
ac_cv_cygwin=no
fi
rm -f conftest*
+rm -f conftest*
fi
echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:2185: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:1791: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2190 "configure"
+#line 1796 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:2197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
ac_cv_mingw32=no
fi
rm -f conftest*
+rm -f conftest*
fi
echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:2213: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2218 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:2225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_emxos2=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2244: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:1822: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
ac_cv_exeext=.exe
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.C | *.o | *.obj | *.xcoff) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2283: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1861: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2313: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1891: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2364: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1942: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2396: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2407 "configure"
+#line 1985 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2438: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2016: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2443: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:2021: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2452: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2471: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2049: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2505: checking how to run the C preprocessor" >&5
+echo "configure:2083: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2520 "configure"
+#line 2098 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2526: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2537 "configure"
+#line 2115 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2543: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2554 "configure"
+#line 2132 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2560: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2138: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2585: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2163: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2590 "configure"
+#line 2168 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2598: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2193 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2211 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2654 "configure"
+#line 2232 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2689: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2267: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2694 "configure"
+#line 2272 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2764: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:2342: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2771 "configure"
+#line 2349 "configure"
#include "confdefs.h"
int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2804: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:2382: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2809 "configure"
+#line 2387 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_off_t=yes"
+ ac_cv_type_off_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_off_t=no"
+ ac_cv_type_off_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
#define off_t long
EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2839: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:2415: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2844 "configure"
+#line 2420 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_size_t=yes"
+ ac_cv_type_size_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_size_t=no"
+ ac_cv_type_size_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2876: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:2450: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2881 "configure"
+#line 2455 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2909: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:2483: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2914 "configure"
+#line 2488 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2974: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:2548: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2979 "configure"
+#line 2553 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3004: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2578: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3009 "configure"
+#line 2583 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3060: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:2633: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3068 "configure"
+#line 2641 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3087: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3112: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2685: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3117 "configure"
+#line 2690 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3122: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3151: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2724: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3156 "configure"
+#line 2729 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3205: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:2777: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3213 "configure"
+#line 2785 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3381: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2953: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3386 "configure"
+#line 2958 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3421: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2993: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3426 "configure"
+#line 2998 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3479: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3050: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3484 "configure"
+#line 3055 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3542: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3112: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3547 "configure"
+#line 3117 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3575: checking whether NLS is requested" >&5
+echo "configure:3145: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3595: checking whether included gettext is requested" >&5
+echo "configure:3165: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3614: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3184: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3619 "configure"
+#line 3189 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3624: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3641: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3211: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3646 "configure"
+#line 3216 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3669: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3239: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3677 "configure"
+#line 3247 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3704: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:3274: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3709 "configure"
+#line 3279 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3744: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3314: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3778: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3348: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3783 "configure"
+#line 3353 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3834: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3403: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3870: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3439: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
fi
cat > conftest.$ac_ext <<EOF
-#line 3902 "configure"
+#line 3471 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3942: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3511: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3976: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3545: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4012: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3581: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4102: checking for catalogs to be installed" >&5
+echo "configure:3671: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4130: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3699: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4135 "configure"
+#line 3704 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4140: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4218: checking for a BSD compatible install" >&5
+echo "configure:3787: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
EXEEXT_FOR_BUILD='$(EXEEXT)'
else
echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:4305: checking for build system executable suffix" >&5
-if eval "test \"\${bfd_cv_build_exeext+set}\" = set"; then
+echo "configure:3870: checking for build system executable suffix" >&5
+if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4333: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3898: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4338 "configure"
+#line 3903 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4343: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4373: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3938: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4378 "configure"
+#line 3943 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4383: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4410: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"\${ac_cv_header_time+set}\" = set"; then
+echo "configure:3975: checking whether time.h and sys/time.h may both be included" >&5
+if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4415 "configure"
+#line 3980 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:4424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4449: checking for $ac_hdr that defines DIR" >&5
-if eval "test \"\${ac_cv_header_dirent_$ac_safe+set}\" = set"; then
+echo "configure:4014: checking for $ac_hdr that defines DIR" >&5
+if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4454 "configure"
+#line 4019 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4462: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4487: checking for opendir in -ldir" >&5
-ac_lib_var=`echo dir'_'opendir | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4052: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4495 "configure"
+#line 4060 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4528: checking for opendir in -lx" >&5
-ac_lib_var=`echo x'_'opendir | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4093: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4536 "configure"
+#line 4101 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in fcntl getpagesize setitimer sysconf fdopen getuid getgid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4572: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4137: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4577 "configure"
+#line 4142 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4636: checking whether strstr must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_strstr+set}\" = set"; then
+echo "configure:4200: checking whether strstr must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4641 "configure"
+#line 4205 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:4683: checking whether malloc must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_malloc+set}\" = set"; then
+echo "configure:4247: checking whether malloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4688 "configure"
+#line 4252 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:4709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:4730: checking whether realloc must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_realloc+set}\" = set"; then
+echo "configure:4294: checking whether realloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4735 "configure"
+#line 4299 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:4756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4777: checking whether free must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_free+set}\" = set"; then
+echo "configure:4341: checking whether free must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4782 "configure"
+#line 4346 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4367: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4824: checking whether getenv must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_getenv+set}\" = set"; then
+echo "configure:4388: checking whether getenv must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4829 "configure"
+#line 4393 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4850: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5056: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4620: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5061 "configure"
+#line 4625 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5066: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$ac_cv_header_sys_procfs_h" = yes; then
echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5094: checking for prstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_prstatus_t+set}\" = set"; then
+echo "configure:4658: checking for prstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5099 "configure"
+#line 4663 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5106: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5128: checking for prstatus_t.pr_who in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who+set}\" = set"; then
+echo "configure:4692: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5133 "configure"
+#line 4697 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prstatus_t avar; void* aref = (void*) &avar.pr_who
; return 0; }
EOF
-if { (eval echo configure:5140: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5162: checking for pstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_pstatus_t+set}\" = set"; then
+echo "configure:4726: checking for pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5167 "configure"
+#line 4731 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4738: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_pstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5196: checking for prpsinfo_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_prpsinfo_t+set}\" = set"; then
+echo "configure:4760: checking for prpsinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5201 "configure"
+#line 4765 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prpsinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:5208: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5230: checking for psinfo_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_psinfo_t+set}\" = set"; then
+echo "configure:4794: checking for psinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5235 "configure"
+#line 4799 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
psinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:5242: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_psinfo_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5264: checking for lwpstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_lwpstatus_t+set}\" = set"; then
+echo "configure:4828: checking for lwpstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5269 "configure"
+#line 4833 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5276: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4840: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5298: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context+set}\" = set"; then
+echo "configure:4862: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5303 "configure"
+#line 4867 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_context
; return 0; }
EOF
-if { (eval echo configure:5310: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5332: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg+set}\" = set"; then
+echo "configure:4896: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5337 "configure"
+#line 4901 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
; return 0; }
EOF
-if { (eval echo configure:5344: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg" 1>&6
echo $ac_n "checking for win32_pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5366: checking for win32_pstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_win32_pstatus_t+set}\" = set"; then
+echo "configure:4930: checking for win32_pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_win32_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5371 "configure"
+#line 4935 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
win32_pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5378: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4942: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_win32_pstatus_t=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5733: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:5297: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5738 "configure"
+#line 5302 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5772: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:5336: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5777 "configure"
+#line 5341 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:5801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:5826: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:5389: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 5834 "configure"
+#line 5397 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:5974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5999: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:5562: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6004 "configure"
+#line 5567 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:6028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@SET_MAKE@%$SET_MAKE%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
TDEFINES = @TDEFINES@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
aoutx.h
archive.c
archures.c
+armnetbsd.c
bfd.c
binary.c
bout.c
cpu-h8300.c
cpu-h8500.c
cpu-hppa.c
+cpu-i370.c
cpu-i386.c
cpu-i860.c
cpu-i960.c
cpu-mcore.c
cpu-mips.c
cpu-ns32k.c
+cpu-pj.c
cpu-powerpc.c
cpu-rs6000.c
cpu-sh.c
cpu-we32k.c
cpu-z8k.c
demo64.c
+dwarf1.c
dwarf2.c
ecoff.c
ecofflink.c
elf-m10300.c
elf.c
elf32-arc.c
+elf32-arm.h
elf32-d10v.c
elf32-d30v.c
elf32-fr30.c
elf32-gen.c
-elf32-hppa.c
-elf32-hppa.h
+elf32-i370.c
elf32-i386.c
elf32-i860.c
elf32-i960.c
elf32-m88k.c
elf32-mcore.c
elf32-mips.c
+elf32-pj.c
elf32-ppc.c
elf32-sh.c
elf32-sparc.c
elfarm-nabi.c
elfarm-oabi.c
elfcode.h
+elfcore.h
elflink.c
+elflink.h
+epoc-pe-arm.c
+epoc-pei-arm.c
format.c
+freebsd.h
genlink.h
go32stub.h
hash.c
hp300bsd.c
hp300hpux.c
-hppa_stubs.h
hpux-core.c
i386aout.c
i386bsd.c
libieee.h
libnlm.h
liboasys.h
+libpei.h
linker.c
lynx-core.c
m68k4knetbsd.c
nlm32.c
nlm64.c
nlmcode.h
+nlmswap.h
ns32k.h
ns32knetbsd.c
oasys.c
pei-i386.c
pei-mcore.c
pei-ppc.c
+peicode.h
+peigen.c
ppcboot.c
reloc.c
reloc16.c
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 02:55-0700\n"
+"POT-Creation-Date: 2000-02-25 22:13-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
-#: aout-adobe.c:182
+#: aout-adobe.c:183
#, c-format
msgid "%s: Unknown section type in a.out.adobe file: %x\n"
msgstr ""
-#: aoutx.h:1237 aoutx.h:1651
+#: aoutx.h:1244 aoutx.h:1658
#, c-format
msgid "%s: can not represent section `%s' in a.out object file format"
msgstr ""
-#: aoutx.h:1621
+#: aoutx.h:1628
#, c-format
msgid ""
"%s: can not represent section for symbol `%s' in a.out object file format"
msgstr ""
-#: aoutx.h:1623
+#: aoutx.h:1630
msgid "*unknown*"
msgstr ""
-#: aoutx.h:3667
+#: aoutx.h:3674
#, c-format
msgid "%s: relocateable link from %s to %s not supported"
msgstr ""
msgid "bfd assertion fail %s:%d"
msgstr ""
+#: bfd.c:697
+#, c-format
+msgid "BFD internal error, aborting at %s line %d in %s\n"
+msgstr ""
+
+#: bfd.c:701
+#, c-format
+msgid "BFD internal error, aborting at %s line %d\n"
+msgstr ""
+
+#: bfd.c:703
+msgid "Please report this bug.\n"
+msgstr ""
+
#: binary.c:298
#, c-format
msgid "Warning: Writing section `%s' to huge (ie negative) file offset 0x%lx."
msgstr ""
-#: coff-a29k.c:121
+#: coff-a29k.c:122
msgid "Missing IHCONST"
msgstr ""
-#: coff-a29k.c:181
+#: coff-a29k.c:182
msgid "Missing IHIHALF"
msgstr ""
-#: coff-a29k.c:213
+#: coff-a29k.c:214
msgid "Unrecognized reloc"
msgstr ""
-#: coff-a29k.c:406
+#: coff-a29k.c:427
msgid "missing IHCONST reloc"
msgstr ""
-#: coff-a29k.c:497
+#: coff-a29k.c:518
msgid "missing IHIHALF reloc"
msgstr ""
msgid "GP relative relocation used when GP not defined"
msgstr ""
-#: coff-alpha.c:1486 elf64-alpha.c:4051
+#: coff-alpha.c:1486 elf64-alpha.c:3984
msgid "using multiple gp values"
msgstr ""
-#: coff-alpha.c:1992 coff-mips.c:1435 elf32-mips.c:4924
+#: coff-alpha.c:1992 coff-mips.c:1435
msgid "GP relative relocation when GP not defined"
msgstr ""
-#: coff-arm.c:884
+#: coff-arm.c:895 elf32-arm.h:258
#, c-format
msgid "%s: unable to find THUMB glue '%s' for `%s'"
msgstr ""
-#: coff-arm.c:913
+#: coff-arm.c:924 elf32-arm.h:291
#, c-format
msgid "%s: unable to find ARM glue '%s' for `%s'"
msgstr ""
-#: coff-arm.c:1188 coff-arm.c:1282
+#: coff-arm.c:1199 coff-arm.c:1293 elf32-arm.h:857 elf32-arm.h:955
#, c-format
msgid "%s(%s): warning: interworking not enabled."
msgstr ""
-#: coff-arm.c:1192
+#: coff-arm.c:1203 elf32-arm.h:958
#, c-format
msgid " first occurrence: %s: arm call to thumb"
msgstr ""
-#: coff-arm.c:1286
+#: coff-arm.c:1297 elf32-arm.h:860
#, c-format
msgid " first occurrence: %s: thumb call to arm"
msgstr ""
-#: coff-arm.c:1289
+#: coff-arm.c:1300
msgid " consider relinking with --support-old-code enabled"
msgstr ""
-#: coff-arm.c:1575 coff-tic80.c:682 cofflink.c:2722
+#: coff-arm.c:1586 coff-tic80.c:682 cofflink.c:2980
#, c-format
msgid "%s: bad reloc address 0x%lx in section `%s'"
msgstr ""
-#: coff-arm.c:2036
+#: coff-arm.c:1923
+#, c-format
+msgid "%s: illegal symbol index in reloc: %d"
+msgstr ""
+
+#: coff-arm.c:2050
#, c-format
msgid "%s: ERROR: compiled for APCS-%d whereas target %s uses APCS-%d"
msgstr ""
-#: coff-arm.c:2051
+#: coff-arm.c:2065
#, c-format
msgid ""
"%s: ERROR: passes floats in float registers whereas target %s uses integer "
"registers"
msgstr ""
-#: coff-arm.c:2054
+#: coff-arm.c:2068
#, c-format
msgid ""
"%s: ERROR: passes floats in integer registers whereas target %s uses float "
"registers"
msgstr ""
-#: coff-arm.c:2069
+#: coff-arm.c:2083
#, c-format
msgid ""
"%s: ERROR: compiled as position independent code, whereas target %s is "
"absolute position"
msgstr ""
-#: coff-arm.c:2072
+#: coff-arm.c:2086
#, c-format
msgid ""
"%s: ERROR: compiled as absolute position code, whereas target %s is position "
"independent"
msgstr ""
-#: coff-arm.c:2101
+#: coff-arm.c:2115
#, c-format
msgid "Warning: input file %s supports interworking, whereas %s does not."
msgstr ""
-#: coff-arm.c:2104
+#: coff-arm.c:2118
#, c-format
msgid "Warning: input file %s does not support interworking, whereas %s does."
msgstr ""
-#: coff-arm.c:2132
+#: coff-arm.c:2146
#, c-format
msgid "private flags = %x:"
msgstr ""
-#: coff-arm.c:2140
+#: coff-arm.c:2154 elf32-arm.h:2088
msgid " [floats passed in float registers]"
msgstr ""
-#: coff-arm.c:2142
+#: coff-arm.c:2156 elf32-arm.h:2090
msgid " [floats passed in integer registers]"
msgstr ""
-#: coff-arm.c:2145
+#: coff-arm.c:2159 elf32-arm.h:2093
msgid " [position independent]"
msgstr ""
-#: coff-arm.c:2147
+#: coff-arm.c:2161 elf32-arm.h:2095
msgid " [absolute position]"
msgstr ""
-#: coff-arm.c:2151
+#: coff-arm.c:2165
msgid " [interworking flag not initialised]"
msgstr ""
-#: coff-arm.c:2153
+#: coff-arm.c:2167
msgid " [interworking supported]"
msgstr ""
-#: coff-arm.c:2155
+#: coff-arm.c:2169
msgid " [interworking not supported]"
msgstr ""
-#: coff-arm.c:2204
+#: coff-arm.c:2218
#, c-format
msgid ""
"Warning: Not setting interworking flag of %s, since it has already been "
"specified as non-interworking"
msgstr ""
-#: coff-arm.c:2208
+#: coff-arm.c:2222
#, c-format
msgid "Warning: Clearing the interworking flag of %s due to outside request"
msgstr ""
-#: coff-i960.c:135 coff-i960.c:484
+#: coff-i960.c:136 coff-i960.c:485
msgid "uncertain calling convention for non-COFF symbol"
msgstr ""
-#: coff-mips.c:875 elf32-mips.c:1136
+#: coff-mips.c:875 elf32-mips.c:1322
msgid "GP relative relocation when _gp not defined"
msgstr ""
msgid "ignoring reloc %s\n"
msgstr ""
-#: coffcode.h:3441
+#: coffcode.h:3928
#, c-format
msgid "%s: warning: illegal symbol index %ld in line numbers"
msgstr ""
-#: coffcode.h:3455
+#: coffcode.h:3942
#, c-format
msgid "%s: warning: duplicate line number information for `%s'"
msgstr ""
-#: coffcode.h:3781
+#: coffcode.h:4297
#, c-format
msgid "%s: Unrecognized storage class %d for %s symbol `%s'"
msgstr ""
-#: coffcode.h:3965
+#: coffcode.h:4428
+#, c-format
+msgid "warning: %s: local symbol `%s' has no section"
+msgstr ""
+
+#: coffcode.h:4541
#, c-format
msgid "%s: warning: illegal symbol index %ld in relocs"
msgstr ""
-#: coffcode.h:4003
+#: coffcode.h:4579
#, c-format
msgid "%s: illegal relocation type %d at address 0x%lx"
msgstr ""
-#: coffgen.c:1607
+#: coffgen.c:1613
#, c-format
msgid "%s: bad string table size %lu"
msgstr ""
-#: cofflink.c:423
+#: coffgen.c:2076
+#, c-format
+msgid "AUX tagndx %ld ttlsiz 0x%lx lnnos %ld next %ld"
+msgstr ""
+
+#: cofflink.c:518 elflink.h:1568
#, c-format
msgid "Warning: type of symbol `%s' changed from %d to %d in %s"
msgstr ""
-#: cofflink.c:2093
+#: cofflink.c:2285
#, c-format
msgid "%s: relocs in section `%s', but it has no contents"
msgstr ""
-#: coffswap.h:888
+#: cofflink.c:2619 coffswap.h:904
#, c-format
-msgid "%s: warning: %s: line number overflow: 0x%lx > 0xffff"
+msgid "%s: %s: reloc overflow: 0x%lx > 0xffff"
msgstr ""
-#: coffswap.h:901
+#: cofflink.c:2628 coffswap.h:891
#, c-format
-msgid "%s: %s: reloc overflow: 0x%lx > 0xffff"
+msgid "%s: warning: %s: line number overflow: 0x%lx > 0xffff"
msgstr ""
-#: dwarf2.c:420
+#: dwarf2.c:429
msgid "Dwarf Error: Can't find .debug_abbrev section."
msgstr ""
-#: dwarf2.c:438
+#: dwarf2.c:447
#, c-format
msgid "Dwarf Error: Abbrev offset (%u) bigger than abbrev size (%u)."
msgstr ""
-#: dwarf2.c:614
+#: dwarf2.c:627
#, c-format
msgid "Dwarf Error: Invalid or unhandled FORM value: %d."
msgstr ""
-#: dwarf2.c:687
+#: dwarf2.c:700
msgid "Dwarf Error: mangled line number section (bad file number)."
msgstr ""
-#: dwarf2.c:738
+#: dwarf2.c:791
msgid "Dwarf Error: Can't find .debug_line section."
msgstr ""
-#: dwarf2.c:903
+#: dwarf2.c:963
msgid "Dwarf Error: mangled line number section."
msgstr ""
-#: dwarf2.c:1097 dwarf2.c:1244
+#: dwarf2.c:1151 dwarf2.c:1307
#, c-format
msgid "Dwarf Error: Could not find abbrev number %d."
msgstr ""
-#: dwarf2.c:1205
+#: dwarf2.c:1268
#, c-format
msgid ""
"Dwarf Error: found dwarf version '%hu', this reader only handles version 2 "
"information."
msgstr ""
-#: dwarf2.c:1212
+#: dwarf2.c:1275
#, c-format
msgid ""
"Dwarf Error: found address size '%u', this reader can not handle sizes "
"greater than '%u'."
msgstr ""
-#: dwarf2.c:1235
+#: dwarf2.c:1298
#, c-format
msgid "Dwarf Error: Bad abbrev number: %d."
msgstr ""
-#: ecoff.c:1308
+#: ecoff.c:1325
#, c-format
msgid "Unknown basic type %d"
msgstr ""
-#: ecoff.c:1580
+#: ecoff.c:1597
#, c-format
msgid ""
"\n"
" End+1 symbol: %ld"
msgstr ""
-#: ecoff.c:1587 ecoff.c:1590
+#: ecoff.c:1604 ecoff.c:1607
#, c-format
msgid ""
"\n"
" First symbol: %ld"
msgstr ""
-#: ecoff.c:1602
+#: ecoff.c:1619
#, c-format
msgid ""
"\n"
" End+1 symbol: %-7ld Type: %s"
msgstr ""
-#: ecoff.c:1609
+#: ecoff.c:1626
#, c-format
msgid ""
"\n"
" Local symbol: %ld"
msgstr ""
-#: ecoff.c:1617
+#: ecoff.c:1634
#, c-format
msgid ""
"\n"
" struct; End+1 symbol: %ld"
msgstr ""
-#: ecoff.c:1622
+#: ecoff.c:1639
#, c-format
msgid ""
"\n"
" union; End+1 symbol: %ld"
msgstr ""
-#: ecoff.c:1627
+#: ecoff.c:1644
#, c-format
msgid ""
"\n"
" enum; End+1 symbol: %ld"
msgstr ""
-#: ecoff.c:1633
+#: ecoff.c:1650
#, c-format
msgid ""
"\n"
" Type: %s"
msgstr ""
-#: elf-m10200.c:455 elf-m10300.c:667 elf32-d10v.c:490 elf32-fr30.c:650
-#: elf32-m32r.c:1157 elf32-v850.c:1674
+#: elf-m10200.c:455 elf-m10300.c:670 elf32-arm.h:1852 elf32-d10v.c:493
+#: elf32-fr30.c:650 elf32-m32r.c:1157 elf32-v850.c:1677
msgid "internal error: out of range error"
msgstr ""
-#: elf-m10200.c:459 elf-m10300.c:671 elf32-d10v.c:494 elf32-fr30.c:654
-#: elf32-m32r.c:1161 elf32-v850.c:1678
+#: elf-m10200.c:459 elf-m10300.c:674 elf32-arm.h:1856 elf32-d10v.c:497
+#: elf32-fr30.c:654 elf32-m32r.c:1161 elf32-v850.c:1681
msgid "internal error: unsupported relocation error"
msgstr ""
-#: elf-m10200.c:463 elf-m10300.c:675 elf32-d10v.c:498 elf32-m32r.c:1165
+#: elf-m10200.c:463 elf-m10300.c:678 elf32-arm.h:1860 elf32-d10v.c:501
+#: elf32-m32r.c:1165
msgid "internal error: dangerous error"
msgstr ""
-#: elf-m10200.c:467 elf-m10300.c:679 elf32-d10v.c:502 elf32-fr30.c:662
-#: elf32-m32r.c:1169 elf32-v850.c:1698
+#: elf-m10200.c:467 elf-m10300.c:682 elf32-arm.h:1864 elf32-d10v.c:505
+#: elf32-fr30.c:662 elf32-m32r.c:1169 elf32-v850.c:1701
msgid "internal error: unknown error"
msgstr ""
-#: elf.c:320
+#: elf.c:323
#, c-format
msgid "%s: invalid string offset %u >= %lu for section `%s'"
msgstr ""
-#: elf.c:543
+#: elf.c:546
msgid ""
"\n"
"Program Header:\n"
msgstr ""
-#: elf.c:591
+#: elf.c:594
msgid ""
"\n"
"Dynamic Section:\n"
msgstr ""
-#: elf.c:693
+#: elf.c:696
msgid ""
"\n"
"Version definitions:\n"
msgstr ""
-#: elf.c:716
+#: elf.c:719
msgid ""
"\n"
"Version References:\n"
msgstr ""
-#: elf.c:721
+#: elf.c:724
#, c-format
msgid " required from %s:\n"
msgstr ""
-#: elf.c:1887
+#: elf.c:1286
+#, c-format
+msgid "%s: invalid link %lu for reloc section %s (index %u)"
+msgstr ""
+
+#: elf.c:2045
#, c-format
msgid ""
"creating section symbol, name = %s, value = 0x%.8lx, index = %d, section = "
"0x%.8lx\n"
msgstr ""
-#: elf.c:2490
+#: elf.c:2648
#, c-format
msgid "%s: Not enough room for program headers (allocated %u, need %u)"
msgstr ""
-#: elf.c:2593
+#: elf.c:2747
#, c-format
msgid "%s: Not enough room for program headers, try linking with -N"
msgstr ""
-#: elf.c:2719
+#: elf.c:2873
#, c-format
msgid "Error: First section in segment (%s) starts at 0x%x"
msgstr ""
-#: elf.c:2722
+#: elf.c:2876
#, c-format
msgid " whereas segment starts at 0x%x"
msgstr ""
-#: elf.c:2992
+#: elf.c:3146
#, c-format
msgid "%s: warning: allocated section `%s' not in segment"
msgstr ""
-#: elf.c:3365
+#: elf.c:3525
#, c-format
msgid "%s: symbol `%s' required but not present"
msgstr ""
-#: elf.c:3374
+#: elf.c:3534
#, c-format
msgid ""
"elf_symbol_from_bfd_symbol 0x%.8lx, name = %s, sym num = %d, flags = "
"0x%.8lx%s\n"
msgstr ""
-#: elf.c:3516
+#: elf.c:3676
#, c-format
msgid "%s: warning: Empty loadable segment detected\n"
msgstr ""
-#: elf.c:4792
+#: elf.c:4952
#, c-format
msgid "%s: unsupported relocation type %s"
msgstr ""
-#: elf32-fr30.c:658 elf32-v850.c:1682
-msgid "internal error: dangerous relocation"
+#: elf32-arm.h:1787 elf32-i386.c:1299 elf32-ppc.c:3092
+#, c-format
+msgid ""
+"%s: warning: unresolvable relocation against symbol `%s' from %s section"
+msgstr ""
+
+#: elf32-arm.h:1890
+#, c-format
+msgid ""
+"Warning: Not setting interwork flag of %s since it has already been "
+"specified as non-interworking"
msgstr ""
-#: elf32-hppa.c:1215
-msgid "Unsupported call to hppa_elf_reloc"
+#: elf32-arm.h:1894
+#, c-format
+msgid "Warning: Clearing the interwork flag of %s due to outside request"
msgstr ""
-#: elf32-i386.c:1293
+#: elf32-arm.h:1942
#, c-format
msgid ""
-"%s: warning: unresolvable relocation against symbol `%s' from %s section"
+"Warning: Clearing the interwork flag in %s because non-interworking code in "
+"%s has been linked with it"
+msgstr ""
+
+#: elf32-arm.h:1976
+#, c-format
+msgid "%s: compiled for a %s endian system and target is %s endian"
+msgstr ""
+
+#: elf32-arm.h:2022
+#, c-format
+msgid "Error: %s compiled for APCS-%d, whereas %s is compiled for APCS-%d"
+msgstr ""
+
+#: elf32-arm.h:2030
+#, c-format
+msgid ""
+"Error: %s passes floats in %s registers, whereas %s passes them in %s "
+"registers"
+msgstr ""
+
+#: elf32-arm.h:2033 elf32-arm.h:2035
+msgid "float"
+msgstr ""
+
+#: elf32-arm.h:2033 elf32-arm.h:2035
+msgid "integer"
+msgstr ""
+
+#: elf32-arm.h:2038
+#, c-format
+msgid "Error: %s is compiled as position %s code, whereas %s is not"
+msgstr ""
+
+#: elf32-arm.h:2041
+msgid "independent"
+msgstr ""
+
+#: elf32-arm.h:2041
+msgid "dependent"
+msgstr ""
+
+#: elf32-arm.h:2047
+#, c-format
+msgid "Warning: %s %s interworking, whereas %s %s"
+msgstr ""
+
+#: elf32-arm.h:2050
+msgid "supports"
+msgstr ""
+
+#: elf32-arm.h:2050
+msgid "does not support"
+msgstr ""
+
+#: elf32-arm.h:2052
+msgid "does not"
+msgstr ""
+
+#: elf32-arm.h:2052
+msgid "does"
+msgstr ""
+
+#. Ignore init flag - it may not be set, despite the flags field containing valid data.
+#: elf32-arm.h:2075 elf32-m68k.c:430 elf32-mips.c:2525
+#, c-format
+msgid "private flags = %lx:"
+msgstr ""
+
+#: elf32-arm.h:2078
+msgid " [interworking enabled]"
+msgstr ""
+
+#: elf32-arm.h:2080
+msgid " [interworking not enabled]"
+msgstr ""
+
+#: elf32-arm.h:2083
+msgid " [APCS-26]"
+msgstr ""
+
+#: elf32-arm.h:2085
+msgid " [APCS-32]"
+msgstr ""
+
+#: elf32-fr30.c:658 elf32-v850.c:1685
+msgid "internal error: dangerous relocation"
+msgstr ""
+
+#: elf32-i386.c:239
+#, c-format
+msgid "%s: invalid relocation type %d"
msgstr ""
#: elf32-m32r.c:808
msgid "SDA relocation when _SDA_BASE_ not defined"
msgstr ""
-#: elf32-m32r.c:892 elf32-ppc.c:3071
+#: elf32-m32r.c:892 elf32-ppc.c:2963
#, c-format
msgid "%s: unknown relocation type %d"
msgstr ""
msgid "%s: The target (%s) of an %s relocation is in the wrong section (%s)"
msgstr ""
-#: elf32-m32r.c:1900
+#: elf32-m32r.c:1902
#, c-format
msgid "%s: Instruction set mismatch with previous modules"
msgstr ""
-#: elf32-m32r.c:1923
+#: elf32-m32r.c:1925
#, c-format
msgid "private flags = %lx"
msgstr ""
-#: elf32-m32r.c:1928
+#: elf32-m32r.c:1930
msgid ": m32r instructions"
msgstr ""
-#. Ignore init flag - it may not be set, despite the flags field containing valid data.
-#: elf32-m68k.c:432 elf32-mips.c:2300
-#, c-format
-msgid "private flags = %lx:"
+#: elf32-m32r.c:1931
+msgid ": m32rx instructions"
msgstr ""
-#: elf32-m68k.c:435
+#: elf32-m68k.c:433
msgid " [cpu32]"
msgstr ""
-#: elf32-mcore.c:330
+#: elf32-mcore.c:329
#, c-format
msgid "%s: compiled for a %s endian system and target is %s endian.\n"
msgstr ""
-#: elf32-mcore.c:374 elf32-mcore.c:502
+#: elf32-mcore.c:377 elf32-mcore.c:504
#, c-format
msgid "%s: Relocation %s (%d) is not currently supported.\n"
msgstr ""
-#: elf32-mcore.c:461
+#: elf32-mcore.c:463
#, c-format
msgid "%s: Unknown relocation type %d\n"
msgstr ""
-#: elf32-mips.c:1296
+#: elf32-mips.c:1481
msgid "32bits gp relative relocation occurs for an external symbol"
msgstr ""
-#: elf32-mips.c:1445
+#: elf32-mips.c:1630
#, c-format
msgid "Linking mips16 objects into %s format is not supported"
msgstr ""
-#: elf32-mips.c:2141 elf32-ppc.c:1410
+#: elf32-mips.c:2360 elf32-ppc.c:1408
#, c-format
msgid "%s: compiled for a big endian system and target is little endian"
msgstr ""
-#: elf32-mips.c:2143 elf32-ppc.c:1412
+#: elf32-mips.c:2362 elf32-ppc.c:1410
#, c-format
msgid "%s: compiled for a little endian system and target is big endian"
msgstr ""
-#: elf32-mips.c:2190
+#: elf32-mips.c:2411
#, c-format
msgid "%s: linking PIC files with non-PIC files"
msgstr ""
-#: elf32-mips.c:2200
+#: elf32-mips.c:2421
#, c-format
msgid "%s: linking abicalls files with non-abicalls files"
msgstr ""
-#: elf32-mips.c:2230
+#: elf32-mips.c:2451
#, c-format
msgid "%s: ISA mismatch (-mips%d) with previous modules (-mips%d)"
msgstr ""
-#: elf32-mips.c:2239
+#: elf32-mips.c:2460
#, c-format
msgid "%s: ISA mismatch (%d) with previous modules (%d)"
msgstr ""
-#: elf32-mips.c:2258
+#: elf32-mips.c:2483
#, c-format
msgid "%s: ABI mismatch: linking %s module with previous %s modules"
msgstr ""
-#: elf32-mips.c:2272 elf32-ppc.c:1479 elf64-sparc.c:2199
+#: elf32-mips.c:2497 elf32-ppc.c:1477 elf64-sparc.c:2827
#, c-format
msgid "%s: uses different e_flags (0x%lx) fields than previous modules (0x%lx)"
msgstr ""
-#: elf32-mips.c:2303
+#: elf32-mips.c:2528
msgid " [abi=O32]"
msgstr ""
-#: elf32-mips.c:2305
+#: elf32-mips.c:2530
msgid " [abi=O64]"
msgstr ""
-#: elf32-mips.c:2307
+#: elf32-mips.c:2532
msgid " [abi=EABI32]"
msgstr ""
-#: elf32-mips.c:2309
+#: elf32-mips.c:2534
msgid " [abi=EABI64]"
msgstr ""
-#: elf32-mips.c:2311
+#: elf32-mips.c:2536
msgid " [abi unknown]"
msgstr ""
-#: elf32-mips.c:2313
+#: elf32-mips.c:2538
+msgid " [abi=N32]"
+msgstr ""
+
+#: elf32-mips.c:2540
+msgid " [abi=64]"
+msgstr ""
+
+#: elf32-mips.c:2542
msgid " [no abi set]"
msgstr ""
-#: elf32-mips.c:2316
+#: elf32-mips.c:2545
msgid " [mips1]"
msgstr ""
-#: elf32-mips.c:2318
+#: elf32-mips.c:2547
msgid " [mips2]"
msgstr ""
-#: elf32-mips.c:2320
+#: elf32-mips.c:2549
msgid " [mips3]"
msgstr ""
-#: elf32-mips.c:2322
+#: elf32-mips.c:2551
msgid " [mips4]"
msgstr ""
-#: elf32-mips.c:2324
+#: elf32-mips.c:2553
msgid " [unknown ISA]"
msgstr ""
-#: elf32-mips.c:2327
+#: elf32-mips.c:2556
msgid " [32bitmode]"
msgstr ""
-#: elf32-mips.c:2329
+#: elf32-mips.c:2558
msgid " [not 32bitmode]"
msgstr ""
-#: elf32-mips.c:3897
+#: elf32-mips.c:4161
msgid "static procedure (no name)"
msgstr ""
-#: elf32-mips.c:4470 elf64-alpha.c:4425
+#: elf32-mips.c:4778 elf64-alpha.c:4358
#, c-format
msgid "%s: illegal section name `%s'"
msgstr ""
-#: elf32-mips.c:4777
-msgid "more got entries are needed for hipage relocations"
-msgstr ""
-
-#: elf32-mips.c:5081
-msgid "_gp_disp used when GP not defined"
+#: elf32-mips.c:5305
+msgid "not enough GOT space for local GOT entries"
msgstr ""
-#: elf32-mips.c:5498
+#: elf32-mips.c:6363
#, c-format
-msgid "%s: %s+0x%lx: jump to mips16 routine which is not jal"
+msgid "%s: %s+0x%lx: jump to stub routine which is not jal"
msgstr ""
-#: elf32-mips.c:6253
+#: elf32-mips.c:7342
#, c-format
msgid "%s: CALL16 reloc at 0x%lx not against global symbol"
msgstr ""
-#: elf32-ppc.c:1445
+#: elf32-ppc.c:1443
#, c-format
msgid ""
"%s: compiled with -mrelocatable and linked with modules compiled normally"
msgstr ""
-#: elf32-ppc.c:1453
+#: elf32-ppc.c:1451
#, c-format
msgid ""
"%s: compiled normally and linked with modules compiled with -mrelocatable"
msgstr ""
-#: elf32-ppc.c:1580
+#: elf32-ppc.c:1578
#, c-format
msgid "%s: Unknown special linker type %d"
msgstr ""
-#: elf32-ppc.c:2311 elf32-ppc.c:2345 elf32-ppc.c:2380
+#: elf32-ppc.c:2251 elf32-ppc.c:2285 elf32-ppc.c:2320
#, c-format
msgid "%s: relocation %s cannot be used when making a shared object"
msgstr ""
-#: elf32-ppc.c:3216
+#: elf32-ppc.c:3121
#, c-format
msgid "%s: unknown relocation type %d for symbol %s"
msgstr ""
-#: elf32-ppc.c:3583 elf32-ppc.c:3605 elf32-ppc.c:3654
+#: elf32-ppc.c:3488 elf32-ppc.c:3510 elf32-ppc.c:3559
#, c-format
msgid ""
"%s: The target (%s) of a %s relocation is in the wrong output section (%s)"
msgstr ""
-#: elf32-ppc.c:3720
+#: elf32-ppc.c:3625
#, c-format
msgid "%s: Relocation %s is not yet supported for symbol %s."
msgstr ""
-#: elf32-sh.c:673
+#: elf32-sh.c:681
#, c-format
msgid "%s: 0x%lx: warning: bad R_SH_USES offset"
msgstr ""
-#: elf32-sh.c:685
+#: elf32-sh.c:693
#, c-format
msgid "%s: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x"
msgstr ""
-#: elf32-sh.c:702
+#: elf32-sh.c:710
#, c-format
msgid "%s: 0x%lx: warning: bad R_SH_USES load offset"
msgstr ""
-#: elf32-sh.c:717
+#: elf32-sh.c:725
#, c-format
msgid "%s: 0x%lx: warning: could not find expected reloc"
msgstr ""
-#: elf32-sh.c:754
+#: elf32-sh.c:762
#, c-format
msgid "%s: 0x%lx: warning: symbol in unexpected section"
msgstr ""
-#: elf32-sh.c:876
+#: elf32-sh.c:884
#, c-format
msgid "%s: 0x%lx: warning: could not find expected COUNT reloc"
msgstr ""
-#: elf32-sh.c:885
+#: elf32-sh.c:893
#, c-format
msgid "%s: 0x%lx: warning: bad count"
msgstr ""
-#: elf32-sh.c:1271 elf32-sh.c:1608
+#: elf32-sh.c:1279 elf32-sh.c:1666
#, c-format
msgid "%s: 0x%lx: fatal: reloc overflow while relaxing"
msgstr ""
-#: elf32-sparc.c:1502 elf64-sparc.c:1577
+#: elf32-sparc.c:1484 elf64-sparc.c:2240
#, c-format
msgid "%s: probably compiled without -fPIC?"
msgstr ""
-#: elf32-sparc.c:1923
+#: elf32-sparc.c:1854
#, c-format
msgid "%s: compiled for a v8plus system and target is v8"
msgstr ""
-#: elf32-sparc.c:1932
+#: elf32-sparc.c:1863
#, c-format
msgid "%s: compiled for a v8plusa system and target is v8plus"
msgstr ""
-#: elf32-sparc.c:1940
+#: elf32-sparc.c:1871
#, c-format
msgid "%s: compiled for a 64 bit system and target is 32 bit"
msgstr ""
-#: elf32-sparc.c:1952
+#: elf32-sparc.c:1883
#, c-format
msgid "%s: linking little endian files with big endian files"
msgstr ""
"Variable `%s' cannot be in both zero and tiny data regions simultaneously"
msgstr ""
-#: elf32-v850.c:1071
+#: elf32-v850.c:1070
msgid "FAILED to find previous HI16 reloc\n"
msgstr ""
-#: elf32-v850.c:1686
+#: elf32-v850.c:1689
msgid "could not locate special linker symbol __gp"
msgstr ""
-#: elf32-v850.c:1690
+#: elf32-v850.c:1693
msgid "could not locate special linker symbol __ep"
msgstr ""
-#: elf32-v850.c:1694
+#: elf32-v850.c:1697
msgid "could not locate special linker symbol __ctbp"
msgstr ""
-#: elf32-v850.c:1880
+#: elf32-v850.c:1886
#, c-format
msgid "%s: Architecture mismatch with previous modules"
msgstr ""
-#: elf32-v850.c:1899
+#: elf32-v850.c:1905
#, c-format
msgid "private flags = %lx: "
msgstr ""
-#: elf32-v850.c:1904
+#: elf32-v850.c:1910
msgid "v850 architecture"
msgstr ""
-#: elf32-v850.c:1905
+#: elf32-v850.c:1911
msgid "v850e architecture"
msgstr ""
-#: elf32-v850.c:1906
+#: elf32-v850.c:1912
msgid "v850ea architecture"
msgstr ""
-#: elf64-alpha.c:949
+#: elf64-alpha.c:947
msgid "GPDISP relocation did not find ldah and lda instructions"
msgstr ""
-#: elf64-alpha.c:2990
+#: elf64-alpha.c:2999
#, c-format
msgid "%s: .got subsegment exceeds 64K (size %d)"
msgstr ""
-#: elf64-sparc.c:810
+#: elf64-sparc.c:1248
#, c-format
msgid "%s: check_relocs: unhandled reloc type %d"
msgstr ""
-#: elf64-sparc.c:2181
+#: elf64-sparc.c:1285
+msgid "%s: Only registers %%g[2367] can be declared using STT_REGISTER"
+msgstr ""
+
+#: elf64-sparc.c:1305
+msgid ""
+"Register %%g%d used incompatibly: previously declared in %s to %s, in %s "
+"redefined to %s"
+msgstr ""
+
+#: elf64-sparc.c:1328
+#, c-format
+msgid "Symbol `%s' has differing types: previously %s, REGISTER in %s"
+msgstr ""
+
+#: elf64-sparc.c:1374
+#, c-format
+msgid "Symbol `%s' has differing types: REGISTER in %s, %s in %s"
+msgstr ""
+
+#: elf64-sparc.c:2809
#, c-format
msgid "%s: linking UltraSPARC specific with HAL specific code"
msgstr ""
-#: elfcode.h:1034
+#: elfcode.h:1061
#, c-format
msgid "%s: version count (%ld) does not match symbol count (%ld)"
msgstr ""
-#: elflink.c:318
+#: elflink.c:423
#, c-format
msgid "%s: Section %s is already to large to put hole of %ld bytes in"
msgstr ""
-#: i386linux.c:449 m68klinux.c:453 sparclinux.c:451
+#: elflink.h:1388
+#, c-format
+msgid "%s: %s: invalid version %u (max %d)"
+msgstr ""
+
+#: elflink.h:1429
+#, c-format
+msgid "%s: %s: invalid needed version %d"
+msgstr ""
+
+#: elflink.h:1546
+#, c-format
+msgid "Warning: size of symbol `%s' changed from %lu to %lu in %s"
+msgstr ""
+
+#: elflink.h:1790
+#, c-format
+msgid "%s: warning: unexpected redefinition of `%s'"
+msgstr ""
+
+#: elflink.h:3480
+#, c-format
+msgid "warning: type and size of dynamic symbol `%s' are not defined"
+msgstr ""
+
+#: elflink.h:3752
+#, c-format
+msgid "%s: undefined versioned symbol name %s"
+msgstr ""
+
+#: elflink.h:4981
+#, c-format
+msgid "%s: could not find output section %s for input section %s"
+msgstr ""
+
+#: i386linux.c:450 m68klinux.c:454 sparclinux.c:452
#, c-format
msgid "Output file requires shared library `%s'\n"
msgstr ""
-#: i386linux.c:457 m68klinux.c:461 sparclinux.c:459
+#: i386linux.c:458 m68klinux.c:462 sparclinux.c:460
#, c-format
msgid "Output file requires shared library `%s.so.%s'\n"
msgstr ""
-#: i386linux.c:645 i386linux.c:695 m68klinux.c:652 m68klinux.c:700
-#: sparclinux.c:648 sparclinux.c:698
+#: i386linux.c:646 i386linux.c:696 m68klinux.c:653 m68klinux.c:701
+#: sparclinux.c:649 sparclinux.c:699
#, c-format
msgid "Symbol %s not defined for fixups\n"
msgstr ""
-#: i386linux.c:719 m68klinux.c:724 sparclinux.c:722
+#: i386linux.c:720 m68klinux.c:725 sparclinux.c:723
msgid "Warning: fixup count mismatch\n"
msgstr ""
msgid "%s: address 0x%s out of range for Intex Hex file"
msgstr ""
-#: libbfd.c:481
+#: libbfd.c:484
#, c-format
msgid "not mapping: data=%lx mapped=%d\n"
msgstr ""
-#: libbfd.c:484
+#: libbfd.c:487
msgid "not mapping: env var not set\n"
msgstr ""
-#: linker.c:2672
+#: linker.c:2679
#, c-format
msgid "Attempt to do relocateable link with %s input and %s output"
msgstr ""
msgid "Unhandled OSF/1 core file section type %d\n"
msgstr ""
+#: peicode.h:395
+#, c-format
+msgid "%s: Import Library Format archives are not currently supported"
+msgstr ""
+
+#: peigen.c:938
+#, c-format
+msgid "%s: line number overflow: 0x%lx > 0xffff"
+msgstr ""
+
+#: peigen.c:950
+#, c-format
+msgid "%s: reloc overflow: 0x%lx > 0xffff"
+msgstr ""
+
+#: peigen.c:963
+msgid "Export Directory [.edata (or where ever we found it)]"
+msgstr ""
+
+#: peigen.c:964
+msgid "Import Directory [parts of .idata]"
+msgstr ""
+
+#: peigen.c:965
+msgid "Resource Directory [.rsrc]"
+msgstr ""
+
+#: peigen.c:966
+msgid "Exception Directory [.pdata]"
+msgstr ""
+
+#: peigen.c:967
+msgid "Security Directory"
+msgstr ""
+
+#: peigen.c:968
+msgid "Base Relocation Directory [.reloc]"
+msgstr ""
+
+#: peigen.c:969
+msgid "Debug Directory"
+msgstr ""
+
+#: peigen.c:970
+msgid "Description Directory"
+msgstr ""
+
+#: peigen.c:971
+msgid "Special Directory"
+msgstr ""
+
+#: peigen.c:972
+msgid "Thread Storage Directory [.tls]"
+msgstr ""
+
+#: peigen.c:973
+msgid "Load Configuration Directory"
+msgstr ""
+
+#: peigen.c:974
+msgid "Bound Import Directory"
+msgstr ""
+
+#: peigen.c:975
+msgid "Import Address Table Directory"
+msgstr ""
+
+#: peigen.c:976 peigen.c:977 peigen.c:978
+msgid "Reserved"
+msgstr ""
+
+#: peigen.c:1022
+msgid ""
+"\n"
+"The import table is the .idata section\n"
+msgstr ""
+
+#: peigen.c:1044
+msgid ""
+"\n"
+"There is an import table, but the section containing it could not be found\n"
+msgstr ""
+
+#: peigen.c:1048
+#, c-format
+msgid ""
+"\n"
+"There is an import table in %s at 0x%lx\n"
+msgstr ""
+
+#: peigen.c:1089
+#, c-format
+msgid ""
+"\n"
+"Function descriptor located at the start address: %04lx\n"
+msgstr ""
+
+#: peigen.c:1092
+#, c-format
+msgid "\tcode-base %08lx toc (loadable/actual) %08lx/%08lx\n"
+msgstr ""
+
+#: peigen.c:1098
+msgid ""
+"\n"
+"No reldata section! Function descriptor not decoded.\n"
+msgstr ""
+
+#: peigen.c:1103
+msgid ""
+"\n"
+"The Import Tables (interpreted .idata section contents)\n"
+msgstr ""
+
+#: peigen.c:1105
+msgid " vma: Hint Time Forward DLL First\n"
+msgstr ""
+
+#: peigen.c:1107
+msgid " Table Stamp Chain Name Thunk\n"
+msgstr ""
+
+#: peigen.c:1157
+#, c-format
+msgid ""
+"\n"
+"\tDLL Name: %s\n"
+msgstr ""
+
+#: peigen.c:1161 peigen.c:1224
+msgid "\tvma: Hint/Ord Member-Name\n"
+msgstr ""
+
+#: peigen.c:1223
+msgid "\tThe Import Address Table (difference found)\n"
+msgstr ""
+
+#: peigen.c:1230
+msgid "\t>>> Ran out of IAT members!\n"
+msgstr ""
+
+#: peigen.c:1248
+msgid "\tThe Import Address Table is identical\n"
+msgstr ""
+
+#: peigen.c:1297
+msgid ""
+"\n"
+"The export table is the .edata section\n"
+msgstr ""
+
+#: peigen.c:1319
+msgid ""
+"\n"
+"There is an export table, but the section containing it could not be found\n"
+msgstr ""
+
+#: peigen.c:1323
+#, c-format
+msgid ""
+"\n"
+"There is an export table in %s at 0x%lx\n"
+msgstr ""
+
+#: peigen.c:1355
+msgid ""
+"\n"
+"The Export Tables (interpreted .edata section contents)\n"
+"\n"
+msgstr ""
+
+#: peigen.c:1358
+#, c-format
+msgid "Export Flags \t\t\t%lx\n"
+msgstr ""
+
+#: peigen.c:1361
+#, c-format
+msgid "Time/Date stamp \t\t%lx\n"
+msgstr ""
+
+#: peigen.c:1364
+#, c-format
+msgid "Major/Minor \t\t\t%d/%d\n"
+msgstr ""
+
+#: peigen.c:1367
+msgid "Name \t\t\t\t"
+msgstr ""
+
+#: peigen.c:1373
+#, c-format
+msgid "Ordinal Base \t\t\t%ld\n"
+msgstr ""
+
+#: peigen.c:1376
+msgid "Number in:\n"
+msgstr ""
+
+#: peigen.c:1379
+#, c-format
+msgid "\tExport Address Table \t\t%lx\n"
+msgstr ""
+
+#: peigen.c:1383
+#, c-format
+msgid "\t[Name Pointer/Ordinal] Table\t%lu\n"
+msgstr ""
+
+#: peigen.c:1386
+msgid "Table Addresses\n"
+msgstr ""
+
+#: peigen.c:1389
+msgid "\tExport Address Table \t\t"
+msgstr ""
+
+#: peigen.c:1394
+msgid "\tName Pointer Table \t\t"
+msgstr ""
+
+#: peigen.c:1399
+msgid "\tOrdinal Table \t\t\t"
+msgstr ""
+
+#: peigen.c:1415
+#, c-format
+msgid ""
+"\n"
+"Export Address Table -- Ordinal Base %ld\n"
+msgstr ""
+
+#: peigen.c:1436
+msgid "Forwarder RVA"
+msgstr ""
+
+#: peigen.c:1444
+msgid "Export RVA"
+msgstr ""
+
+#: peigen.c:1451
+msgid ""
+"\n"
+"[Ordinal/Name Pointer] Table\n"
+msgstr ""
+
+#: peigen.c:1496
+#, c-format
+msgid "Warning, .pdata section size (%ld) is not a multiple of %d\n"
+msgstr ""
+
+#: peigen.c:1500
+msgid ""
+"\n"
+"The Function Table (interpreted .pdata section contents)\n"
+msgstr ""
+
+#: peigen.c:1502
+msgid " vma:\t\tBegin End EH EH PrologEnd Exception\n"
+msgstr ""
+
+#: peigen.c:1504
+msgid " \t\tAddress Address Handler Data Address Mask\n"
+msgstr ""
+
+#: peigen.c:1576
+msgid " Register save millicode"
+msgstr ""
+
+#: peigen.c:1579
+msgid " Register restore millicode"
+msgstr ""
+
+#: peigen.c:1582
+msgid " Glue code sequence"
+msgstr ""
+
+#: peigen.c:1628
+msgid ""
+"\n"
+"\n"
+"PE File Base Relocations (interpreted .reloc section contents)\n"
+msgstr ""
+
+#: peigen.c:1663
+#, c-format
+msgid ""
+"\n"
+"Virtual Address: %08lx Chunk size %ld (0x%lx) Number of fixups %ld\n"
+msgstr ""
+
+#: peigen.c:1676
+#, c-format
+msgid "\treloc %4d offset %4x [%4lx] %s"
+msgstr ""
+
+#. The MS dumpbin program reportedly ands with 0xff0f before
+#. printing the characteristics field. Not sure why. No reason to
+#. emulate it here.
+#: peigen.c:1715
+#, c-format
+msgid ""
+"\n"
+"Characteristics 0x%x\n"
+msgstr ""
+
#: ppcboot.c:418
msgid ""
"\n"
msgid "Partition[%d] length = 0x%.8lx (%ld)\n"
msgstr ""
-#: som.c:5276
+#: som.c:5335
msgid "som_sizeof_headers unimplemented"
msgstr ""
msgid "%s:%d: Unexpected character `%s' in S-record file\n"
msgstr ""
-#: syms.c:922
+#: syms.c:974
msgid "Unsupported .stab relocation"
msgstr ""
-#: vms-gsd.c:694
+#: vms-gsd.c:357
+#, c-format
+msgid "bfd_make_section (%s) failed"
+msgstr ""
+
+#: vms-gsd.c:371
+#, c-format
+msgid "bfd_set_section_flags (%s, %x) failed"
+msgstr ""
+
+#: vms-gsd.c:407
+#, c-format
+msgid "Size mismatch section %s=%lx, %s=%lx"
+msgstr ""
+
+#: vms-gsd.c:702
#, c-format
msgid "unknown gsd/egsd subtype %d"
msgstr ""
-#: vms-hdr.c:407
+#: vms-hdr.c:405
msgid "Object module NOT error-free !\n"
msgstr ""
-#: vms-misc.c:539
+#: vms-misc.c:541
#, c-format
msgid "Stack overflow (%d) in _bfd_vms_push"
msgstr ""
-#: vms-misc.c:558
+#: vms-misc.c:560
msgid "Stack underflow in _bfd_vms_pop"
msgstr ""
-#: vms-misc.c:929
+#: vms-misc.c:931
msgid "_bfd_vms_output_counted called with zero bytes"
msgstr ""
-#: vms-misc.c:934
+#: vms-misc.c:936
msgid "_bfd_vms_output_counted called with too many bytes"
msgstr ""
msgid "Unsupported STA cmd %d"
msgstr ""
-#: vms-tir.c:329 vms-tir.c:1289
+#: vms-tir.c:329 vms-tir.c:1287
#, c-format
msgid "Reserved STA cmd %d"
msgstr ""
msgid "ETIR_S_C_STO_HINT_PS: not implemented"
msgstr ""
-#: vms-tir.c:544 vms-tir.c:1462
+#: vms-tir.c:544 vms-tir.c:1460
#, c-format
msgid "Reserved STO cmd %d"
msgstr ""
msgid "ETIR_S_C_OPR_DFLIT: Not supported"
msgstr ""
-#: vms-tir.c:710 vms-tir.c:1658
+#: vms-tir.c:710 vms-tir.c:1656
#, c-format
msgid "Reserved OPR cmd %d"
msgstr ""
-#: vms-tir.c:779 vms-tir.c:1728
+#: vms-tir.c:779 vms-tir.c:1726
#, c-format
msgid "Reserved CTL cmd %d"
msgstr ""
#. * arg: -
#. *
#.
-#: vms-tir.c:1189
+#: vms-tir.c:1187
msgid "Stack-from-image not implemented"
msgstr ""
-#: vms-tir.c:1209
+#: vms-tir.c:1207
msgid "Stack-entry-mask not fully implemented"
msgstr ""
#. * compare argument descriptor with symbol argument (ARG$V_PASSMECH)
#. * and stack TRUE (args match) or FALSE (args dont match) value
#.
-#: vms-tir.c:1225
+#: vms-tir.c:1223
msgid "PASSMECH not fully implemented"
msgstr ""
-#: vms-tir.c:1245
+#: vms-tir.c:1243
msgid "Stack-local-symbol not fully implemented"
msgstr ""
-#: vms-tir.c:1260
+#: vms-tir.c:1258
msgid "Stack-literal not fully implemented"
msgstr ""
-#: vms-tir.c:1282
+#: vms-tir.c:1280
msgid "Stack-local-symbol-entry-point-mask not fully implemented"
msgstr ""
-#: vms-tir.c:1458
+#: vms-tir.c:1456
#, c-format
msgid "Unimplemented STO cmd %d"
msgstr ""
-#: vms-tir.c:1598
+#: vms-tir.c:1596
msgid "TIR_S_C_OPR_ASH incomplete"
msgstr ""
-#: vms-tir.c:1612
+#: vms-tir.c:1610
msgid "TIR_S_C_OPR_USH incomplete"
msgstr ""
-#: vms-tir.c:1626
+#: vms-tir.c:1624
msgid "TIR_S_C_OPR_ROT incomplete"
msgstr ""
#.
#. * redefine symbol to current location
#.
-#: vms-tir.c:1647
+#: vms-tir.c:1645
msgid "TIR_S_C_OPR_REDEF not supported"
msgstr ""
#.
#. * define a literal
#.
-#: vms-tir.c:1654
+#: vms-tir.c:1652
msgid "TIR_S_C_OPR_DFLIT not supported"
msgstr ""
-#: vms-tir.c:1709
+#: vms-tir.c:1707
msgid "TIR_S_C_CTL_DFLOC not fully implemented"
msgstr ""
-#: vms-tir.c:1717
+#: vms-tir.c:1715
msgid "TIR_S_C_CTL_STLOC not fully implemented"
msgstr ""
-#: vms-tir.c:1725
+#: vms-tir.c:1723
msgid "TIR_S_C_CTL_STKDL not fully implemented"
msgstr ""
-#: vms-tir.c:1780
+#: vms-tir.c:1778
#, c-format
msgid "Obj code %d not found"
msgstr ""
-#: vms-tir.c:2129
+#: vms-tir.c:2127
#, c-format
msgid "SEC_RELOC with no relocs in section %s"
msgstr ""
-#: vms-tir.c:2403
+#: vms-tir.c:2401
#, c-format
msgid "Unhandled relocation %s"
msgstr ""
msgid "%s: no such symbol"
msgstr ""
-#: xcofflink.c:3728
+#: xcofflink.c:3733
#, c-format
msgid "warning: attempt to export undefined symbol `%s'"
msgstr ""
-#: xcofflink.c:4704
+#: xcofflink.c:4709
#, c-format
msgid "TOC overflow: 0x%lx > 0x10000; try -mminimal-toc when compiling"
msgstr ""
-#: xcofflink.c:5529 xcofflink.c:5885 xcofflink.c:5922 xcofflink.c:6239
+#: xcofflink.c:5534 xcofflink.c:5890 xcofflink.c:5927 xcofflink.c:6244
#, c-format
msgid "%s: loader reloc in unrecognized section `%s'"
msgstr ""
-#: xcofflink.c:5551 xcofflink.c:6250
+#: xcofflink.c:5556 xcofflink.c:6255
#, c-format
msgid "%s: `%s' in loader reloc but not loader sym"
msgstr ""
-#: xcofflink.c:5566
+#: xcofflink.c:5571
#, c-format
msgid "%s: loader reloc in read-only section %s"
msgstr ""
-#: xcofflink.c:6446
+#: xcofflink.c:6451
#, c-format
msgid "%s: unsupported relocation type 0x%02x"
msgstr ""
-#: xcofflink.c:6492
+#: xcofflink.c:6497
#, c-format
msgid "%s: TOC reloc at 0x%x to symbol `%s' with no TOC entry"
msgstr ""
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NLMCONV_DEFS = @NLMCONV_DEFS@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
UNDERSCORE = @UNDERSCORE@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
l = @l@
AC_SUBST($1)])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-targets alternative target configurations"
ac_help="$ac_help
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1297: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1296: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1313: checking for BSD-compatible nm" >&5
+echo "configure:1312: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1351: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1418: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1516: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1525: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1528: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1554: checking whether ln -s works" >&5
+echo "configure:1348: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1596 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1397 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1618: checking whether the C compiler needs -belf" >&5
+echo "configure:1419: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1623 "configure"
+#line 1424 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1653: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1685: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1720: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1752: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1917: checking for $ac_word" >&5
+echo "configure:1567: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1947: checking for $ac_word" >&5
+echo "configure:1597: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1998: checking for $ac_word" >&5
+echo "configure:1648: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2030: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1680: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2041 "configure"
+#line 1691 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2046: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2072: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1722: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2077: checking whether we are using GNU C" >&5
+echo "configure:1727: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2086: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1736: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2105: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1755: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2142: checking for $ac_word" >&5
+echo "configure:1792: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2173: checking how to run the C preprocessor" >&5
+echo "configure:1823: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2188 "configure"
+#line 1838 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2205 "configure"
+#line 1855 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2222 "configure"
+#line 1872 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2258: checking for $ac_word" >&5
+echo "configure:1908: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2291: checking for $ac_word" >&5
+echo "configure:1941: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2325: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1975: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2333 "configure"
+#line 1983 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:2344: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1994: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2367: checking lex output file root" >&5
+echo "configure:2017: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2388: checking whether yytext is a pointer" >&5
+echo "configure:2038: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2400 "configure"
+#line 2050 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
ALL_LINGUAS=
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2431: checking for POSIXized ISC" >&5
+echo "configure:2081: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2452: checking for ANSI C header files" >&5
+echo "configure:2102: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2457 "configure"
+#line 2107 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2465: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2482 "configure"
+#line 2132 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2500 "configure"
+#line 2150 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2171 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2556: checking for working const" >&5
+echo "configure:2206: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2561 "configure"
+#line 2211 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2610: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2260: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2631: checking for inline" >&5
+echo "configure:2281: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2638 "configure"
+#line 2288 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2645: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2295: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2671: checking for off_t" >&5
+echo "configure:2321: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2676 "configure"
+#line 2326 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2704: checking for size_t" >&5
+echo "configure:2354: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2709 "configure"
+#line 2359 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2739: checking for working alloca.h" >&5
+echo "configure:2389: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2744 "configure"
+#line 2394 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2772: checking for alloca" >&5
+echo "configure:2422: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2777 "configure"
+#line 2427 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2837: checking whether alloca needs Cray hooks" >&5
+echo "configure:2487: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2842 "configure"
+#line 2492 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2867: checking for $ac_func" >&5
+echo "configure:2517: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2872 "configure"
+#line 2522 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2922: checking stack direction for C alloca" >&5
+echo "configure:2572: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2930 "configure"
+#line 2580 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2974: checking for $ac_hdr" >&5
+echo "configure:2624: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2979 "configure"
+#line 2629 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3013: checking for $ac_func" >&5
+echo "configure:2663: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3018 "configure"
+#line 2668 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3066: checking for working mmap" >&5
+echo "configure:2716: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3074 "configure"
+#line 2724 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3242: checking for $ac_hdr" >&5
+echo "configure:2892: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3247 "configure"
+#line 2897 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3282: checking for $ac_func" >&5
+echo "configure:2932: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3287 "configure"
+#line 2937 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3339: checking for $ac_func" >&5
+echo "configure:2989: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3344 "configure"
+#line 2994 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3367: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3401: checking for LC_MESSAGES" >&5
+echo "configure:3051: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3406 "configure"
+#line 3056 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3434: checking whether NLS is requested" >&5
+echo "configure:3084: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3454: checking whether included gettext is requested" >&5
+echo "configure:3104: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3473: checking for libintl.h" >&5
+echo "configure:3123: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3478 "configure"
+#line 3128 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3500: checking for gettext in libc" >&5
+echo "configure:3150: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3505 "configure"
+#line 3155 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3528: checking for bindtextdomain in -lintl" >&5
+echo "configure:3178: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3536 "configure"
+#line 3186 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3563: checking for gettext in libintl" >&5
+echo "configure:3213: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3568 "configure"
+#line 3218 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3603: checking for $ac_word" >&5
+echo "configure:3253: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3637: checking for $ac_func" >&5
+echo "configure:3287: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3642 "configure"
+#line 3292 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3692: checking for $ac_word" >&5
+echo "configure:3342: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3728: checking for $ac_word" >&5
+echo "configure:3378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3760 "configure"
+#line 3410 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3800: checking for $ac_word" >&5
+echo "configure:3450: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3834: checking for $ac_word" >&5
+echo "configure:3484: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3870: checking for $ac_word" >&5
+echo "configure:3520: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3960: checking for catalogs to be installed" >&5
+echo "configure:3610: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3988: checking for linux/version.h" >&5
+echo "configure:3638: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3993 "configure"
+#line 3643 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4061: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3711: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4084: checking for Cygwin environment" >&5
+echo "configure:3734: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4089 "configure"
+#line 3739 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:4100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4117: checking for mingw32 environment" >&5
+echo "configure:3767: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4122 "configure"
+#line 3772 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:4129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4148: checking for executable suffix" >&5
+echo "configure:3798: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:3808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4201: checking for $ac_word" >&5
+echo "configure:3851: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4240: checking for a BSD compatible install" >&5
+echo "configure:3890: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
EXEEXT_FOR_BUILD='$(EXEEXT)'
else
echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:4307: checking for build system executable suffix" >&5
+echo "configure:3957: checking for build system executable suffix" >&5
if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4342: checking for $ac_hdr" >&5
+echo "configure:3992: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4347 "configure"
+#line 3997 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4002: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:4379: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:4029: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4384 "configure"
+#line 4034 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:4400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4423: checking for working alloca.h" >&5
+echo "configure:4073: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4428 "configure"
+#line 4078 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:4435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4456: checking for alloca" >&5
+echo "configure:4106: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4461 "configure"
+#line 4111 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:4489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4521: checking whether alloca needs Cray hooks" >&5
+echo "configure:4171: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4526 "configure"
+#line 4176 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4551: checking for $ac_func" >&5
+echo "configure:4201: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4556 "configure"
+#line 4206 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4606: checking stack direction for C alloca" >&5
+echo "configure:4256: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 4614 "configure"
+#line 4264 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:4633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
for ac_func in sbrk utimes
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4657: checking for $ac_func" >&5
+echo "configure:4307: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4662 "configure"
+#line 4312 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Some systems have frexp only in -lm, not in -lc.
echo $ac_n "checking for library containing frexp""... $ac_c" 1>&6
-echo "configure:4713: checking for library containing frexp" >&5
+echo "configure:4363: checking for library containing frexp" >&5
if eval "test \"`echo '$''{'ac_cv_search_frexp'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_frexp="no"
cat > conftest.$ac_ext <<EOF
-#line 4720 "configure"
+#line 4370 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
frexp()
; return 0; }
EOF
-if { (eval echo configure:4731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_frexp="none required"
else
test "$ac_cv_search_frexp" = "no" && for i in m; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4742 "configure"
+#line 4392 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
frexp()
; return 0; }
EOF
-if { (eval echo configure:4753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_frexp="-l$i"
break
fi
echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6
-echo "configure:4775: checking for time_t in time.h" >&5
+echo "configure:4425: checking for time_t in time.h" >&5
if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4780 "configure"
+#line 4430 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
time_t i;
; return 0; }
EOF
-if { (eval echo configure:4787: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bu_cv_decl_time_t_time_h=yes
else
fi
echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:4808: checking for time_t in sys/types.h" >&5
+echo "configure:4458: checking for time_t in sys/types.h" >&5
if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4813 "configure"
+#line 4463 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
time_t i;
; return 0; }
EOF
-if { (eval echo configure:4820: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4470: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bu_cv_decl_time_t_types_h=yes
else
# Under Next 3.2 <utime.h> apparently does not define struct utimbuf
# by default.
echo $ac_n "checking for utime.h""... $ac_c" 1>&6
-echo "configure:4843: checking for utime.h" >&5
+echo "configure:4493: checking for utime.h" >&5
if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4848 "configure"
+#line 4498 "configure"
#include "confdefs.h"
#include <sys/types.h>
#ifdef HAVE_TIME_H
struct utimbuf s;
; return 0; }
EOF
-if { (eval echo configure:4859: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4509: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bu_cv_header_utime_h=yes
else
fi
echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6
-echo "configure:4880: checking whether fprintf must be declared" >&5
+echo "configure:4530: checking whether fprintf must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_fprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4885 "configure"
+#line 4535 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) fprintf
; return 0; }
EOF
-if { (eval echo configure:4906: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_fprintf=no
else
fi
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4927: checking whether strstr must be declared" >&5
+echo "configure:4577: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4932 "configure"
+#line 4582 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4953: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:4974: checking whether sbrk must be declared" >&5
+echo "configure:4624: checking whether sbrk must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4979 "configure"
+#line 4629 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) sbrk
; return 0; }
EOF
-if { (eval echo configure:5000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_sbrk=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:5021: checking whether getenv must be declared" >&5
+echo "configure:4671: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5026 "configure"
+#line 4676 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:5047: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
fi
echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
-echo "configure:5068: checking whether environ must be declared" >&5
+echo "configure:4718: checking whether environ must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5073 "configure"
+#line 4723 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) environ
; return 0; }
EOF
-if { (eval echo configure:5094: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_environ=no
else
s%@SET_MAKE@%$SET_MAKE%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@YACC@%$YACC%g
s%@LEX@%$LEX%g
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 02:58-0700\n"
+"POT-Creation-Date: 2000-02-25 22:16-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
" [--basenames] [--functions] [addr addr ...]\n"
msgstr ""
-#: addr2line.c:83 ar.c:255 nlmconv.c:1141 nm.c:304 objcopy.c:318 objcopy.c:337
-#: objdump.c:236 readelf.c:1168 size.c:89 strings.c:512 windres.c:730
+#: addr2line.c:83 ar.c:286 nlmconv.c:1141 nm.c:304 objcopy.c:344 objcopy.c:376
+#: objdump.c:277 readelf.c:1697 size.c:89 strings.c:512 windres.c:737
msgid "Report bugs to bug-gnu-utils@gnu.org\n"
msgstr ""
msgid "%s: can not get addresses from archive"
msgstr ""
-#: ar.c:207
+#: ar.c:235
#, c-format
msgid "no entry %s in archive\n"
msgstr ""
-#: ar.c:224
+#: ar.c:252
#, c-format
msgid ""
-"Usage: %s [-]{dmpqrstx}[abcilosSuvV] [member-name] archive-file file...\n"
+"Usage: %s [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file "
+"file...\n"
msgstr ""
-#: ar.c:226
+#: ar.c:255
#, c-format
msgid " %s -M [<mri-script]\n"
msgstr ""
-#: ar.c:227
+#: ar.c:256
msgid " commands:\n"
msgstr ""
-#: ar.c:228
+#: ar.c:257
msgid " d - delete file(s) from the archive\n"
msgstr ""
-#: ar.c:229
+#: ar.c:258
msgid " m[ab] - move file(s) in the archive\n"
msgstr ""
-#: ar.c:230
+#: ar.c:259
msgid " p - print file(s) found in the archive\n"
msgstr ""
-#: ar.c:231
+#: ar.c:260
msgid " q[f] - quick append file(s) to the archive\n"
msgstr ""
-#: ar.c:232
+#: ar.c:261
msgid ""
" r[ab][f][u] - replace existing or insert new file(s) into the archive\n"
msgstr ""
-#: ar.c:233
+#: ar.c:262
msgid " t - display contents of archive\n"
msgstr ""
-#: ar.c:234
+#: ar.c:263
msgid " x[o] - extract file(s) from the archive\n"
msgstr ""
-#: ar.c:235
+#: ar.c:264
msgid " command specific modifiers:\n"
msgstr ""
-#: ar.c:236
+#: ar.c:265
msgid " [a] - put file(s) after [member-name]\n"
msgstr ""
-#: ar.c:237
+#: ar.c:266
msgid " [b] - put file(s) before [member-name] (same as [i])\n"
msgstr ""
-#: ar.c:238
+#: ar.c:267
+msgid " [N] - use instance [count] of name\n"
+msgstr ""
+
+#: ar.c:268
msgid " [f] - truncate inserted file names\n"
msgstr ""
-#: ar.c:239
+#: ar.c:269
+msgid " [P] - use full path names when matching\n"
+msgstr ""
+
+#: ar.c:270
msgid " [o] - preserve original dates\n"
msgstr ""
-#: ar.c:240
+#: ar.c:271
msgid ""
" [u] - only replace files that are newer than current archive "
"contents\n"
msgstr ""
-#: ar.c:241
+#: ar.c:272
msgid " generic modifiers:\n"
msgstr ""
-#: ar.c:242
+#: ar.c:273
msgid " [c] - do not warn if the library had to be created\n"
msgstr ""
-#: ar.c:243
+#: ar.c:274
msgid " [s] - create an archive index (cf. ranlib)\n"
msgstr ""
-#: ar.c:244
+#: ar.c:275
msgid " [S] - do not build a symbol table\n"
msgstr ""
-#: ar.c:245
+#: ar.c:276
msgid " [v] - be verbose\n"
msgstr ""
-#: ar.c:246
+#: ar.c:277
msgid " [V] - display the version number\n"
msgstr ""
-#: ar.c:250
+#: ar.c:281
#, c-format
msgid "Usage: %s [-vV] archive\n"
msgstr ""
-#: ar.c:431
+#: ar.c:466
msgid "two different operation options specified"
msgstr ""
-#: ar.c:500
+#: ar.c:541
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr ""
-#: ar.c:532
+#: ar.c:573
msgid "no operation specified"
msgstr ""
-#: ar.c:535
+#: ar.c:576
msgid "`u' is only meaningful with the `r' option."
msgstr ""
-#: ar.c:615
-#, c-format
-msgid "%s: internal error -- this option not implemented\n"
+#: ar.c:586
+msgid "`N' is only meaningful with the `x' and 'd' options."
+msgstr ""
+
+#: ar.c:589
+msgid "Value for `N' must be positive."
msgstr ""
-#: ar.c:730 ar.c:782 ar.c:1212 objcopy.c:972
+#: ar.c:672
#, c-format
-msgid "internal stat error on %s"
+msgid "%s: internal error -- this option not implemented\n"
msgstr ""
-#: ar.c:734
+#: ar.c:790 ar.c:841 ar.c:1283 objcopy.c:1021
#, c-format
-msgid ""
-"\n"
-"<member %s>\n"
-"\n"
+msgid "internal stat error on %s"
msgstr ""
-#: ar.c:751 ar.c:819
+#: ar.c:810 ar.c:878
#, c-format
msgid "%s is not a valid archive"
msgstr ""
-#: ar.c:787
+#: ar.c:846
#, c-format
msgid "stat returns negative size for %s"
msgstr ""
-#: ar.c:908
+#: ar.c:967
#, c-format
msgid "%s is not an archive"
msgstr ""
-#: ar.c:915
+#: ar.c:974
#, c-format
msgid "%s: creating %s\n"
msgstr ""
-#: ar.c:1110
+#: ar.c:1181
#, c-format
msgid "No member named `%s'\n"
msgstr ""
-#: ar.c:1162
+#: ar.c:1233
#, c-format
msgid "%s: no entry %s in archive %s!\n"
msgstr ""
-#: ar.c:1322
+#: ar.c:1395
#, c-format
msgid "%s: no archive map to update"
msgstr ""
-#: arsup.c:86
+#: arsup.c:87
#, c-format
msgid "No entry %s in archive.\n"
msgstr ""
-#: arsup.c:118
+#: arsup.c:119
#, c-format
msgid "Can't open file %s\n"
msgstr ""
-#: arsup.c:166
+#: arsup.c:167
#, c-format
msgid "%s: Can't open output archive %s\n"
msgstr ""
-#: arsup.c:178
+#: arsup.c:179
#, c-format
msgid "%s: Can't open input archive %s\n"
msgstr ""
-#: arsup.c:184
+#: arsup.c:185
#, c-format
msgid "%s: file %s is not an archive\n"
msgstr ""
-#: arsup.c:225
+#: arsup.c:226
#, c-format
msgid "%s: no output archive specified yet\n"
msgstr ""
-#: arsup.c:245 arsup.c:280 arsup.c:316 arsup.c:336 arsup.c:394
+#: arsup.c:246 arsup.c:281 arsup.c:317 arsup.c:337 arsup.c:395
#, c-format
msgid "%s: no open output archive\n"
msgstr ""
-#: arsup.c:253 arsup.c:354 arsup.c:374
+#: arsup.c:254 arsup.c:355 arsup.c:375
#, c-format
msgid "%s: can't open file %s\n"
msgstr ""
-#: arsup.c:301 arsup.c:370 arsup.c:449
+#: arsup.c:302 arsup.c:371 arsup.c:450
#, c-format
msgid "%s: can't find module file %s\n"
msgstr ""
-#: arsup.c:401
+#: arsup.c:402
#, c-format
msgid "Current open archive is %s\n"
msgstr ""
-#: arsup.c:428
+#: arsup.c:429
#, c-format
msgid "%s: no open archive\n"
msgstr ""
msgid "debug_get_real_type: circular debug information for %s\n"
msgstr ""
-#: debug.c:2663
+#: debug.c:2662
msgid "debug_write_type: illegal type encountered"
msgstr ""
-#: dlltool.c:711 dlltool.c:735 dlltool.c:760
+#: dlltool.c:770 dlltool.c:794 dlltool.c:819
#, c-format
msgid "Internal error: Unknown machine type: %d\n"
msgstr ""
-#: dlltool.c:794
+#: dlltool.c:856
#, c-format
msgid "Can't open def file: %s"
msgstr ""
-#: dlltool.c:799
+#: dlltool.c:861
#, c-format
msgid "Processing def file: %s"
msgstr ""
-#: dlltool.c:803
+#: dlltool.c:865
msgid "Processed def file"
msgstr ""
-#: dlltool.c:828
+#: dlltool.c:890
#, c-format
msgid "Syntax error in def file %s:%d\n"
msgstr ""
-#: dlltool.c:861
+#: dlltool.c:923
#, c-format
msgid "NAME: %s base: %x"
msgstr ""
-#: dlltool.c:864
+#: dlltool.c:926
msgid "Can't have LIBRARY and NAME\n"
msgstr ""
-#: dlltool.c:880
+#: dlltool.c:942
#, c-format
msgid "LIBRARY: %s base: %x"
msgstr ""
-#: dlltool.c:883
+#: dlltool.c:945
#, c-format
msgid "%s: Can't have LIBRARY and NAME\n"
msgstr ""
-#: dlltool.c:1138
+#: dlltool.c:1200 resrc.c:271
#, c-format
msgid "wait: %s"
msgstr ""
-#: dlltool.c:1143
+#: dlltool.c:1205 resrc.c:276
#, c-format
msgid "subprocess got fatal signal %d"
msgstr ""
-#: dlltool.c:1149
+#: dlltool.c:1211
#, c-format
msgid "%s exited with status %d\n"
msgstr ""
-#: dlltool.c:1181
+#: dlltool.c:1243
#, c-format
msgid "Sucking in info from %s section in %s\n"
msgstr ""
-#: dlltool.c:1291
+#: dlltool.c:1367
#, c-format
msgid "Excluding symbol: %s\n"
msgstr ""
-#: dlltool.c:1386 dlltool.c:1397 nm.c:902 nm.c:913 objdump.c:379 objdump.c:396
+#: dlltool.c:1462 dlltool.c:1473 nm.c:902 nm.c:913 objdump.c:444 objdump.c:461
#, c-format
msgid "%s: no symbols\n"
msgstr ""
#. FIXME: we ought to read in and block out the base relocations
-#: dlltool.c:1424
+#: dlltool.c:1500
#, c-format
msgid "Done reading %s\n"
msgstr ""
-#: dlltool.c:1435
+#: dlltool.c:1511
#, c-format
msgid "Unable to open object file: %s"
msgstr ""
-#: dlltool.c:1438
+#: dlltool.c:1514
#, c-format
msgid "Scanning object file %s"
msgstr ""
-#: dlltool.c:1453
+#: dlltool.c:1529
#, c-format
msgid "Cannot produce mcore-elf dll from archive file: %s"
msgstr ""
-#: dlltool.c:1538
+#: dlltool.c:1621
msgid "Adding exports to output file"
msgstr ""
-#: dlltool.c:1583
+#: dlltool.c:1666
msgid "Added exports to output file"
msgstr ""
-#: dlltool.c:1691
+#: dlltool.c:1790
#, c-format
msgid "Generating export file: %s\n"
msgstr ""
-#: dlltool.c:1696
+#: dlltool.c:1795
#, c-format
msgid "Unable to open temporary assembler file: %s"
msgstr ""
-#: dlltool.c:1699
+#: dlltool.c:1798
#, c-format
msgid "Opened temporary file: %s"
msgstr ""
-#: dlltool.c:1918
+#: dlltool.c:2012
msgid "Generated exports file"
msgstr ""
-#: dlltool.c:2171
+#: dlltool.c:2267
#, c-format
msgid "bfd_open failed open stub file: %s"
msgstr ""
-#: dlltool.c:2174
+#: dlltool.c:2270
#, c-format
msgid "Creating stub file: %s"
msgstr ""
-#: dlltool.c:2557
+#: dlltool.c:2657
#, c-format
msgid "failed to open temporary head file: %s"
msgstr ""
-#: dlltool.c:2623
+#: dlltool.c:2716
#, c-format
msgid "failed to open temporary tail file: %s"
msgstr ""
-#: dlltool.c:2698
+#: dlltool.c:2784
#, c-format
msgid "Can't open .lib file: %s"
msgstr ""
-#: dlltool.c:2701
+#: dlltool.c:2787
#, c-format
msgid "Creating library file: %s\n"
msgstr ""
-#: dlltool.c:2757
+#: dlltool.c:2846
#, c-format
msgid "cannot delete %s: %s\n"
msgstr ""
-#: dlltool.c:2761
+#: dlltool.c:2850
msgid "Created lib file"
msgstr ""
-#: dlltool.c:2862
+#: dlltool.c:2955
#, c-format
msgid "Warning, ignoring duplicate EXPORT %s %d,%d\n"
msgstr ""
-#: dlltool.c:2868
+#: dlltool.c:2961
#, c-format
msgid "Error, duplicate EXPORT with oridinals: %s"
msgstr ""
-#: dlltool.c:2995
+#: dlltool.c:3088
msgid "Processing definitions"
msgstr ""
-#: dlltool.c:3033
+#: dlltool.c:3126
msgid "Processed definitions"
msgstr ""
#. xgetext:c-format
-#: dlltool.c:3044
+#: dlltool.c:3137
#, c-format
msgid "Usage %s <options> <object-files>\n"
msgstr ""
#. xgetext:c-format
-#: dlltool.c:3046
+#: dlltool.c:3139
#, c-format
msgid ""
" -m --machine <machine> Create as DLL for <machine>. [default: %s]\n"
msgstr ""
-#: dlltool.c:3047
+#: dlltool.c:3140
msgid ""
-" possible <machine>: arm[_interwork], i386, mcore[-elf][-le], ppc, "
-"thumb\n"
+" possible <machine>: arm[_interwork], i386, mcore[-elf]{-le|-be}, "
+"ppc, thumb\n"
msgstr ""
-#: dlltool.c:3048
+#: dlltool.c:3141
msgid " -e --output-exp <outname> Generate an export file.\n"
msgstr ""
-#: dlltool.c:3049
+#: dlltool.c:3142
msgid " -l --output-lib <outname> Generate an interface library.\n"
msgstr ""
-#: dlltool.c:3050
+#: dlltool.c:3143
msgid " -a --add-indirect Add dll indirects to export file.\n"
msgstr ""
-#: dlltool.c:3051
+#: dlltool.c:3144
msgid ""
" -D --dllname <name> Name of input dll to put into interface lib.\n"
msgstr ""
-#: dlltool.c:3052
+#: dlltool.c:3145
msgid " -d --input-def <deffile> Name of .def file to be read in.\n"
msgstr ""
-#: dlltool.c:3053
+#: dlltool.c:3146
msgid " -z --output-def <deffile> Name of .def file to be created.\n"
msgstr ""
-#: dlltool.c:3054
+#: dlltool.c:3147
msgid " --export-all-symbols Export all symbols to .def\n"
msgstr ""
-#: dlltool.c:3055
+#: dlltool.c:3148
msgid " --no-export-all-symbols Only export listed symbols\n"
msgstr ""
-#: dlltool.c:3056
+#: dlltool.c:3149
msgid " --exclude-symbols <list> Don't export <list>\n"
msgstr ""
-#: dlltool.c:3057
+#: dlltool.c:3150
msgid " --no-default-excludes Clear default exclude symbols\n"
msgstr ""
-#: dlltool.c:3058
+#: dlltool.c:3151
msgid " -b --base-file <basefile> Read linker generated base file.\n"
msgstr ""
-#: dlltool.c:3059
+#: dlltool.c:3152
msgid " -x --no-idata4 Don't generate idata$4 section.\n"
msgstr ""
-#: dlltool.c:3060
+#: dlltool.c:3153
msgid " -c --no-idata5 Don't generate idata$5 section.\n"
msgstr ""
-#: dlltool.c:3061
+#: dlltool.c:3154
msgid ""
" -U --add-underscore Add underscores to symbols in interface "
"library.\n"
msgstr ""
-#: dlltool.c:3062
+#: dlltool.c:3155
msgid " -k --kill-at Kill @<n> from exported names.\n"
msgstr ""
-#: dlltool.c:3063
+#: dlltool.c:3156
msgid " -A --add-stdcall-alias Add aliases without @<n>.\n"
msgstr ""
-#: dlltool.c:3064
+#: dlltool.c:3157
msgid " -S --as <name> Use <name> for assembler.\n"
msgstr ""
-#: dlltool.c:3065
+#: dlltool.c:3158
msgid " -f --as-flags <flags> Pass <flags> to the assembler.\n"
msgstr ""
-#: dlltool.c:3066
+#: dlltool.c:3159
+msgid ""
+" -C --compat-implib Create backward compatible import library.\n"
+msgstr ""
+
+#: dlltool.c:3160
msgid ""
" -n --no-delete Keep temp files (repeat for extra "
"preservation).\n"
msgstr ""
-#: dlltool.c:3067
+#: dlltool.c:3161
msgid " -v --verbose Be verbose.\n"
msgstr ""
-#: dlltool.c:3068
+#: dlltool.c:3162
msgid " -V --version Display the program version.\n"
msgstr ""
-#: dlltool.c:3069
+#: dlltool.c:3163
msgid " -h --help Display this information.\n"
msgstr ""
-#: dlltool.c:3071
+#: dlltool.c:3165
msgid ""
" -M --mcore-elf <outname> Process mcore-elf object files into <outname>.\n"
msgstr ""
-#: dlltool.c:3072
+#: dlltool.c:3166
msgid " -L --linker <name> Use <name> as the linker.\n"
msgstr ""
-#: dlltool.c:3073
+#: dlltool.c:3167
msgid " -F --linker-flags <flags> Pass <flags> to the linker.\n"
msgstr ""
-#: dlltool.c:3216
+#: dlltool.c:3311
#, c-format
msgid "Unable to open base-file: %s"
msgstr ""
-#: dlltool.c:3242
+#: dlltool.c:3340
#, c-format
msgid "Machine '%s' not supported"
msgstr ""
-#: dlltool.c:3385
-msgid "buffer overflow\n"
+#: dlltool.c:3443 dllwrap.c:215
+#, c-format
+msgid "Tried file: %s"
+msgstr ""
+
+#: dlltool.c:3450 dllwrap.c:222
+#, c-format
+msgid "Using file: %s"
msgstr ""
#: ieee.c:316
"Archive index:\n"
msgstr ""
-#: objcopy.c:293
-#, c-format
-msgid ""
-"Usage: %s [-vVSpgxX] [-I bfdname] [-O bfdname] [-F bfdname] [-b byte]\n"
-" [-R section] [-i interleave] [--interleave=interleave] [--byte=byte]\n"
-" [--input-target=bfdname] [--output-target=bfdname] "
-"[--target=bfdname]\n"
-" [--strip-all] [--strip-debug] [--strip-unneeded] [--discard-all]\n"
-" [--discard-locals] [--debugging] [--remove-section=section]\n"
+#: objcopy.c:296
+#, c-format
+msgid "Usage: %s <switches> in-file [out-file]\n"
+msgstr ""
+
+#: objcopy.c:297 objcopy.c:354
+msgid " The switches are:\n"
+msgstr ""
+
+#: objcopy.c:298
+msgid ""
+" -I --input-target <bfdname> Assume input file is in format <bfdname>\n"
+" -O --output-target <bfdname> Create an output file in format "
+"<bfdname>\n"
+" -F --target <bfdname> Set both input and output format to "
+"<bfdname>\n"
+" --debugging Convert debugging information, if "
+"possible\n"
+" -p --preserve-dates Copy modified/access timestamps to the "
+"output\n"
+" -j --only-section <name> Only copy section <name> into the output\n"
+" -R --remove-section <name> Remove section <name> from the output\n"
+" -S --strip-all Remove all symbol and relocation "
+"information\n"
+" -g --strip-debug Remove all debugging symbols\n"
+" --strip-unneeded Remove all symbols not needed by "
+"relocations\n"
+" -N --strip-symbol <name> Do not copy symbol <name>\n"
+" -K --keep-symbol <name> Only copy symbol <name>\n"
+" -L --localize-symbol <name> Force symbol <name> to be marked as a "
+"local\n"
+" -W --weaken-symbol <name> Force symbol <name> to be marked as a "
+"weak\n"
+" --weaken Force all global symbols to be marked as "
+"weak\n"
+" -x --discard-all Remove all non-global symbols\n"
+" -X --discard-locals Remove any compiler-generated symbols\n"
+" -i --interleave <number> Only copy one out of every <number> "
+"bytes\n"
+" -b --byte <num> Select byte <num> in every interleaved "
+"block\n"
+" --gap-fill <val> Fill gaps between sections with <val>\n"
+" --pad-to <addr> Pad the last section up to address "
+"<addr>\n"
+" --set-start <addr> Set the start address to <addr>\n"
+" {--change-start|--adjust-start} <incr>\n"
+" Add <incr> to the start address\n"
+" {--change-addresses|--adjust-vma} <incr>\n"
+" Add <incr> to LMA, VMA and start "
+"addresses\n"
+" {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>\n"
+" Change LMA and VMA of section <name> by "
+"<val>\n"
+" --change-section-lma <name>{=|+|-}<val>\n"
+" Change the LMA of section <name> by "
+"<val>\n"
+" --change-section-vma <name>{=|+|-}<val>\n"
+" Change the VMA of section <name> by "
+"<val>\n"
+" {--[no-]change-warnings|--[no-]adjust-warnings}\n"
+" Warn if a named section does not exist\n"
+" --set-section-flags <name>=<flags>\n"
+" Set section <name>'s properties to "
+"<flags>\n"
+" --add-section <name>=<file> Add section <name> found in <file> to "
+"output\n"
+" --change-leading-char Force output format's leading character "
+"style\n"
+" --remove-leading-char Remove leading character from global "
+"symbols\n"
+" -v --verbose List all object files modified\n"
+" -V --version Display this program's version number\n"
+" -h --help Display this output\n"
msgstr ""
-#: objcopy.c:300
-msgid ""
-" [--gap-fill=val] [--pad-to=address] [--preserve-dates]\n"
-" [--set-start=val] \n"
-" [--change-start=incr] [--change-addresses=incr] \n"
-" (--adjust-start and --adjust-vma are aliases for these two) \n"
-" [--change-section-address=section{=,+,-}val]\n"
-" (--adjust-section-vma is an alias for --change-section-address)\n"
-" [--change-section-lma=section{=,+,-}val]\n"
-" [--change-section-vma=section{=,+,-}val]\n"
-" [--adjust-warnings] [--no-adjust-warnings]\n"
-" [--change-warnings] [--no-change-warnings]\n"
-" [--set-section-flags=section=flags] "
-"[--add-section=sectionname=filename]\n"
-" [--keep-symbol symbol] [-K symbol] [--strip-symbol symbol] [-N "
-"symbol]\n"
-" [--localize-symbol symbol] [-L symbol] [--weaken-symbol symbol]\n"
-" [-W symbol] [--change-leading-char] [--remove-leading-char] "
-"[--weaken]\n"
-" [--verbose] [--version] [--help] in-file [out-file]\n"
+#: objcopy.c:353
+#, c-format
+msgid "Usage: %s <switches> in-file(s)\n"
msgstr ""
-#: objcopy.c:327
-#, c-format
+#: objcopy.c:355
msgid ""
-"Usage: %s [-vVsSpgxX] [-I bfdname] [-O bfdname] [-F bfdname] [-R section]\n"
-" [--input-target=bfdname] [--output-target=bfdname] "
-"[--target=bfdname]\n"
-" [--strip-all] [--strip-debug] [--strip-unneeded] [--discard-all]\n"
-" [--discard-locals] [--keep-symbol symbol] [-K symbol]\n"
-" [--strip-symbol symbol] [-N symbol] [--remove-section=section]\n"
-" [-o file] [--preserve-dates] [--verbose] [--version] [--help] "
-"file...\n"
+" -I --input-target <bfdname> Assume input file is in format <bfdname>\n"
+" -O --output-target <bfdname> Create an output file in format "
+"<bfdname>\n"
+" -F --target <bfdname> Set both input and output format to "
+"<bfdname>\n"
+" -p --preserve-dates Copy modified/access timestamps to the "
+"output\n"
+" -R --remove-section <name> Remove section <name> from the output\n"
+" -s --strip-all Remove all symbol and relocation "
+"information\n"
+" -g -S --strip-debug Remove all debugging symbols\n"
+" --strip-unneeded Remove all symbols not needed by "
+"relocations\n"
+" -N --strip-symbol <name> Do not copy symbol <name>\n"
+" -K --keep-symbol <name> Only copy symbol <name>\n"
+" -x --discard-all Remove all non-global symbols\n"
+" -X --discard-locals Remove any compiler-generated symbols\n"
+" -v --verbose List all object files modified\n"
+" -V --version Display this program's version number\n"
+" -h --help Display this output\n"
+" -o <file> Place stripped output into <file>\n"
msgstr ""
-#: objcopy.c:383
+#: objcopy.c:425
#, c-format
msgid "unrecognized section flag `%s'"
msgstr ""
-#: objcopy.c:384
-msgid "supported flags: alloc, load, readonly, code, data, rom, contents"
+#: objcopy.c:426
+msgid ""
+"supported flags: alloc, load, noload, readonly, debug, code, data, rom, "
+"share, contents"
msgstr ""
-#: objcopy.c:623
+#: objcopy.c:671
#, c-format
msgid "copy from %s(%s) to %s(%s)\n"
msgstr ""
-#: objcopy.c:642
+#: objcopy.c:690
#, c-format
msgid "Warning: Output file cannot represent architecture %s"
msgstr ""
-#: objcopy.c:669
+#: objcopy.c:717
#, c-format
msgid "can't create section `%s': %s"
msgstr ""
-#: objcopy.c:755
+#: objcopy.c:803
#, c-format
msgid "Can't fill gap after %s: %s"
msgstr ""
-#: objcopy.c:780
+#: objcopy.c:828
#, c-format
msgid "Can't add padding to %s: %s"
msgstr ""
-#: objcopy.c:916
+#: objcopy.c:965
#, c-format
msgid "%s: error copying private BFD data: %s"
msgstr ""
-#: objcopy.c:950
+#: objcopy.c:999
#, c-format
msgid "cannot mkdir %s for archive copying (error: %s)"
msgstr ""
-#: objcopy.c:1217
+#: objcopy.c:1268
#, c-format
msgid "%s: section `%s': error in %s: %s"
msgstr ""
-#: objcopy.c:1489
+#: objcopy.c:1542
#, c-format
msgid "%s: can't create debugging section: %s"
msgstr ""
-#: objcopy.c:1504
+#: objcopy.c:1557
#, c-format
msgid "%s: can't set debugging section contents: %s"
msgstr ""
-#: objcopy.c:1513
+#: objcopy.c:1566
#, c-format
msgid "%s: don't know how to write debugging information for %s"
msgstr ""
-#: objcopy.c:1618
+#: objcopy.c:1671
#, c-format
msgid "%s: cannot stat: %s"
msgstr ""
-#: objcopy.c:1668
+#: objcopy.c:1721
msgid "byte number must be non-negative"
msgstr ""
-#: objcopy.c:1673
+#: objcopy.c:1726
msgid "interleave must be positive"
msgstr ""
-#: objcopy.c:1742
+#: objcopy.c:1742 objcopy.c:1749
+#, c-format
+msgid "%s both copied and removed"
+msgstr ""
+
+#: objcopy.c:1804
msgid "bad format for --add-section NAME=FILENAME"
msgstr ""
-#: objcopy.c:1745
+#: objcopy.c:1807
#, c-format
msgid "cannot stat: %s: %s"
msgstr ""
-#: objcopy.c:1763
+#: objcopy.c:1825
#, c-format
msgid "cannot open: %s: %s"
msgstr ""
-#: objcopy.c:1767
+#: objcopy.c:1829
#, c-format
msgid "%s: fread failed"
msgstr ""
-#: objcopy.c:1804
+#: objcopy.c:1872
#, c-format
msgid "bad format for %s"
msgstr ""
-#: objcopy.c:1868
+#: objcopy.c:1936
#, c-format
msgid "Warning: truncating gap-fill from 0x%s to 0x%x"
msgstr ""
-#: objcopy.c:1892
+#: objcopy.c:1960
msgid "bad format for --set-section-flags"
msgstr ""
-#: objcopy.c:1922
+#: objcopy.c:1990
msgid "byte number must be less than interleave"
msgstr ""
-#: objcopy.c:1941
+#: objcopy.c:2009
#, c-format
msgid "Cannot stat: %s: %s"
msgstr ""
-#: objcopy.c:1981
+#: objcopy.c:2049
#, c-format
msgid "Warning: --change-section-vma %s%c0x%s never used"
msgstr ""
-#: objcopy.c:1994
+#: objcopy.c:2062
#, c-format
msgid "Warning: --change-section-lma %s%c0x%s never used"
msgstr ""
-#: objdump.c:219
+#: objdump.c:229
#, c-format
-msgid ""
-"Usage: %s [-ahifCdDprRtTxsSlw] [-b bfdname] [-m machine] [-j section-name]\n"
-" [--archive-headers] [--target=bfdname] [--debugging] [--disassemble]\n"
-" [--disassemble-all] [--disassemble-zeroes] [--file-headers]\n"
-" [--section-headers] [--headers]\n"
-" [--info] [--section=section-name] [--line-numbers] [--source]\n"
+msgid "Usage: %s <switches> file(s)\n"
msgstr ""
-#: objdump.c:226
-msgid ""
-" [--architecture=machine] [--reloc] [--full-contents] [--stabs]\n"
-" [--syms] [--all-headers] [--dynamic-syms] [--dynamic-reloc]\n"
-" [--wide] [--version] [--help] [--private-headers]\n"
-" [--start-address=addr] [--stop-address=addr]\n"
-" [--prefix-addresses] [--[no-]show-raw-insn] [--demangle]\n"
-" [--adjust-vma=offset] [-EB|-EL] [--endian={big|little}] objfile...\n"
-"at least one option besides -l (--line-numbers) must be given\n"
+#: objdump.c:230
+msgid " At least one of the following switches must be given:\n"
msgstr ""
-#: objdump.c:361
+#: objdump.c:231
+msgid ""
+" -a --archive-headers Display archive header information\n"
+" -f --file-headers Display the contents of the overall file header\n"
+" -p --private-headers Display object format specific file header "
+"contents\n"
+" -h --[section-]headers Display the contents of the section headers\n"
+" -x --all-headers Display the contents of all headers\n"
+" -d --disassemble Display assembler contents of executable "
+"sections\n"
+" -D --disassemble-all Display assembler contents of all sections\n"
+" -S --source Intermix source code with disassembly\n"
+" -s --full-contents Display the full contents of all sections "
+"requested\n"
+" -g --debugging Display debug information in object file\n"
+" -G --stabs Display the STABS contents of an ELF format file\n"
+" -t --syms Display the contents of the symbol table(s)\n"
+" -T --dynamic-syms Display the contents of the dynamic symbol table\n"
+" -r --reloc Display the relocation entries in the file\n"
+" -R --dynamic-reloc Display the dynamic relocation entries in the "
+"file\n"
+" -V --version Display this program's version number\n"
+" -i --info List object formats and architectures supported\n"
+" -H --help Display this information\n"
+msgstr ""
+
+#: objdump.c:253
+msgid ""
+"\n"
+" The following switches are optional:\n"
+msgstr ""
+
+#: objdump.c:254
+msgid ""
+" -b --target <bfdname> Specify the target object format as "
+"<bfdname>\n"
+" -m --architecture <machine> Specify the target architecture as "
+"<machine>\n"
+" -j --section <name> Only display information for section "
+"<name>\n"
+" -M --disassembler-options <o> Pass text <o> on to the disassembler\n"
+" -EB --endian=big Assume big endian format when "
+"disassembling\n"
+" -EL --endian=little Assume little endian format when "
+"disassembling\n"
+" --file-start-context Include context from start of file (with "
+"-S)\n"
+" -l --line-numbers Include line numbers and filenames in "
+"output\n"
+" -C --demangle Decode mangled/processed symbol names\n"
+" -w --wide Format output for more than 80 columns\n"
+" -z --disassemble-zeroes Do not skip blocks of zeroes when "
+"disassembling\n"
+" --start-address <addr> Only process data whoes address is >= "
+"<addr>\n"
+" --stop-address <addr> Only process data whoes address is <= "
+"<addr>\n"
+" --prefix-addresses Print complete address alongside "
+"disassembly\n"
+" --[no-]show-raw-insn Display hex alongside symbolic disassembly\n"
+" --adjust-vma <offset> Add <offset> to all displayed section "
+"addresses\n"
+"\n"
+msgstr ""
+
+#: objdump.c:420
msgid "Sections:\n"
msgstr ""
-#: objdump.c:363
-msgid "Idx Name Size VMA LMA File off Algn\n"
+#: objdump.c:423
+msgid "Idx Name Size VMA LMA File off Algn"
msgstr ""
-#: objdump.c:365
+#: objdump.c:425
msgid ""
"Idx Name Size VMA LMA File off "
-"Algn\n"
+"Algn"
+msgstr ""
+
+#: objdump.c:429
+msgid " Flags"
msgstr ""
-#: objdump.c:414
+#: objdump.c:479
#, c-format
msgid "%s: %s: not a dynamic object\n"
msgstr ""
-#: objdump.c:431
+#: objdump.c:496
#, c-format
msgid "%s: %s: No dynamic symbols\n"
msgstr ""
-#: objdump.c:1131
+#: objdump.c:1200
msgid "Out of virtual memory\n"
msgstr ""
-#: objdump.c:1532
+#: objdump.c:1611
#, c-format
msgid "%s: Can't use supplied machine %s\n"
msgstr ""
-#: objdump.c:1553
+#: objdump.c:1632
#, c-format
msgid "%s: Can't disassemble for architecture %s\n"
msgstr ""
-#: objdump.c:1627
+#: objdump.c:1709
#, c-format
msgid "Disassembly of section %s:\n"
msgstr ""
-#: objdump.c:1798
+#: objdump.c:1883
#, c-format
msgid ""
"No %s section present\n"
"\n"
msgstr ""
-#: objdump.c:1805
+#: objdump.c:1890
#, c-format
msgid "%s: %s has no %s section\n"
msgstr ""
-#: objdump.c:1818 objdump.c:1829
+#: objdump.c:1904 objdump.c:1916
#, c-format
msgid "%s: Reading %s section of %s failed: %s\n"
msgstr ""
-#: objdump.c:1871
+#: objdump.c:1959
#, c-format
msgid ""
"Contents of %s section:\n"
"\n"
msgstr ""
-#: objdump.c:1971
+#: objdump.c:2059
#, c-format
msgid "architecture: %s, "
msgstr ""
-#: objdump.c:1974
+#: objdump.c:2062
#, c-format
msgid "flags 0x%08x:\n"
msgstr ""
-#: objdump.c:1987
+#: objdump.c:2075
msgid ""
"\n"
"start address 0x"
msgstr ""
-#: objdump.c:2030
+#: objdump.c:2107
#, c-format
msgid ""
"\n"
"%s: file format %s\n"
msgstr ""
-#: objdump.c:2071
+#: objdump.c:2150
#, c-format
msgid "%s: printing debugging information failed\n"
msgstr ""
-#: objdump.c:2105
+#: objdump.c:2227
#, c-format
msgid "In archive %s:\n"
msgstr ""
-#: objdump.c:2158
+#: objdump.c:2279
#, c-format
msgid "Contents of section %s:\n"
msgstr ""
-#: objdump.c:2664
+#: objdump.c:2788
#, c-format
msgid "BFD header file version %s\n"
msgstr ""
-#: objdump.c:2789
+#: objdump.c:2861
#, c-format
msgid "%s: unrecognized -E option\n"
msgstr ""
-#: objdump.c:2800
+#: objdump.c:2873
#, c-format
msgid "%s: unrecognized --endian type `%s'\n"
msgstr ""
msgid "Last stabs entries before error:\n"
msgstr ""
-#: readelf.c:237 readelf.c:263
+#: readelf.c:301 readelf.c:327
#, c-format
msgid "%s: Error: "
msgstr ""
-#: readelf.c:249 readelf.c:278
+#: readelf.c:313 readelf.c:342
#, c-format
msgid "%s: Warning: "
msgstr ""
-#: readelf.c:308 readelf.c:333
+#: readelf.c:392 readelf.c:530
#, c-format
msgid "Unhandled data length: %d\n"
msgstr ""
-#: readelf.c:372
+#: readelf.c:589
msgid "Don't know about relocations on this machine architecture\n"
msgstr ""
-#: readelf.c:410 readelf.c:439
+#: readelf.c:629 readelf.c:658 readelf.c:690 readelf.c:718
msgid "out of memory parsing relocs"
msgstr ""
-#: readelf.c:456
+#: readelf.c:736
msgid ""
" Offset Info Type Symbol's Value Symbol's Name "
"Addend\n"
msgstr ""
-#: readelf.c:459
+#: readelf.c:739
msgid " Offset Info Type Symbol's Value Symbol's Name\n"
msgstr ""
-#: readelf.c:567
+#: readelf.c:879 readelf.c:881
#, c-format
msgid "unrecognised: %-7lx"
msgstr ""
-#: readelf.c:585
+#: readelf.c:906
#, c-format
msgid "<string table index %3ld>"
msgstr ""
-#: readelf.c:739
+#: readelf.c:1113
#, c-format
msgid "Processor Specific: %lx"
msgstr ""
-#: readelf.c:742
+#: readelf.c:1132
#, c-format
msgid "Operating System specific: %lx"
msgstr ""
-#: readelf.c:744 readelf.c:996
+#: readelf.c:1135 readelf.c:1500
#, c-format
msgid "<unknown>: %lx"
msgstr ""
-#: readelf.c:758
+#: readelf.c:1149
msgid "NONE (None)"
msgstr ""
-#: readelf.c:759
+#: readelf.c:1150
msgid "REL (Relocatable file)"
msgstr ""
-#: readelf.c:760
+#: readelf.c:1151
msgid "EXEC (Executable file)"
msgstr ""
-#: readelf.c:761
+#: readelf.c:1152
msgid "DYN (Shared object file)"
msgstr ""
-#: readelf.c:762
+#: readelf.c:1153
msgid "CORE (Core file)"
msgstr ""
-#: readelf.c:766
+#: readelf.c:1157
#, c-format
msgid "Processor Specific: (%x)"
msgstr ""
-#: readelf.c:768
+#: readelf.c:1159
#, c-format
msgid "OS Specific: (%x)"
msgstr ""
-#: readelf.c:770 readelf.c:829 readelf.c:932 readelf.c:1107
+#: readelf.c:1161 readelf.c:1238 readelf.c:1632
#, c-format
msgid "<unknown>: %x"
msgstr ""
-#: readelf.c:783
+#: readelf.c:1174
msgid "None"
msgstr ""
-#: readelf.c:929
-msgid "ELFDATA2LSB (little endian)"
-msgstr ""
-
-#: readelf.c:930
-msgid "ELFDATA2MSB (big endian)"
-msgstr ""
-
-#: readelf.c:1143
+#: readelf.c:1670
msgid "Usage: readelf {options} elf-file(s)\n"
msgstr ""
-#: readelf.c:1144
+#: readelf.c:1671
msgid " Options are:\n"
msgstr ""
-#: readelf.c:1145
-msgid ""
-" -a or --all Equivalent to: -h -l -S -s -r -d -V --histogram\n"
+#: readelf.c:1672
+msgid " -a or --all Equivalent to: -h -l -S -s -r -d -V -A -I\n"
msgstr ""
-#: readelf.c:1146
+#: readelf.c:1673
msgid " -h or --file-header Display the ELF file header\n"
msgstr ""
-#: readelf.c:1147
+#: readelf.c:1674
msgid " -l or --program-headers or --segments\n"
msgstr ""
-#: readelf.c:1148
+#: readelf.c:1675
msgid " Display the program headers\n"
msgstr ""
-#: readelf.c:1149
+#: readelf.c:1676
msgid " -S or --section-headers or --sections\n"
msgstr ""
-#: readelf.c:1150
+#: readelf.c:1677
msgid " Display the sections' header\n"
msgstr ""
-#: readelf.c:1151
+#: readelf.c:1678
msgid " -e or --headers Equivalent to: -h -l -S\n"
msgstr ""
-#: readelf.c:1152
+#: readelf.c:1679
msgid " -s or --syms or --symbols Display the symbol table\n"
msgstr ""
-#: readelf.c:1153
+#: readelf.c:1680
+msgid " -n or --notes Display the core notes (if present)\n"
+msgstr ""
+
+#: readelf.c:1681
msgid " -r or --relocs Display the relocations (if present)\n"
msgstr ""
-#: readelf.c:1154
+#: readelf.c:1682
msgid " -d or --dynamic Display the dynamic segment (if present)\n"
msgstr ""
-#: readelf.c:1155
+#: readelf.c:1683
msgid " -V or --version-info Display the version sections (if present)\n"
msgstr ""
-#: readelf.c:1156
+#: readelf.c:1684
+msgid ""
+" -A or --arch-specific Display architecture specific information (if "
+"any).\n"
+msgstr ""
+
+#: readelf.c:1685
msgid ""
" -D or --use-dynamic Use the dynamic section info when displaying "
"symbols\n"
msgstr ""
-#: readelf.c:1157
+#: readelf.c:1686
msgid " -x <number> or --hex-dump=<number>\n"
msgstr ""
-#: readelf.c:1158
+#: readelf.c:1687
msgid " Dump the contents of section <number>\n"
msgstr ""
-#: readelf.c:1159
+#: readelf.c:1688
msgid " -w[liapr] or --debug-dump[=line,=info,=abbrev,=pubnames,=ranges]\n"
msgstr ""
-#: readelf.c:1160
+#: readelf.c:1689
msgid ""
" Display the contents of DWARF2 debug sections\n"
msgstr ""
-#: readelf.c:1162
+#: readelf.c:1691
msgid " -i <number> or --instruction-dump=<number>\n"
msgstr ""
-#: readelf.c:1163
+#: readelf.c:1692
msgid ""
" Disassemble the contents of section <number>\n"
msgstr ""
-#: readelf.c:1165
-msgid " --histogram Display histogram of bucket list lengths\n"
+#: readelf.c:1694
+msgid " -I or --histogram Display histogram of bucket list lengths\n"
msgstr ""
-#: readelf.c:1166
+#: readelf.c:1695
msgid " -v or --version Display the version number of readelf\n"
msgstr ""
-#: readelf.c:1167
+#: readelf.c:1696
msgid " -H or --help Display this information\n"
msgstr ""
-#: readelf.c:1185
+#: readelf.c:1714
msgid "Out of memory allocating dump request table."
msgstr ""
-#: readelf.c:1309
+#: readelf.c:1849
#, c-format
msgid "Unrecognised debug option '%s'\n"
msgstr ""
-#: readelf.c:1334
+#: readelf.c:1874
#, c-format
msgid "Invalid option '-%c'\n"
msgstr ""
-#: readelf.c:1347
+#: readelf.c:1887
msgid "Nothing to do.\n"
msgstr ""
-#: readelf.c:1360 readelf.c:1377 readelf.c:2531
+#: readelf.c:1900 readelf.c:1917 readelf.c:3484
msgid "none"
msgstr ""
-#: readelf.c:1361
+#: readelf.c:1901
msgid "ELF32"
msgstr ""
-#: readelf.c:1362
+#: readelf.c:1902
msgid "ELF64"
msgstr ""
-#: readelf.c:1364 readelf.c:1381 readelf.c:1398
+#: readelf.c:1904 readelf.c:1921 readelf.c:1940
#, c-format
-msgid "<unknown: %lx>"
+msgid "<unknown: %x>"
msgstr ""
-#: readelf.c:1378
+#: readelf.c:1918
msgid "2's complement, little endian"
msgstr ""
-#: readelf.c:1379
+#: readelf.c:1919
msgid "2's complement, big endian"
msgstr ""
-#: readelf.c:1394
+#: readelf.c:1934
msgid "UNIX - System V"
msgstr ""
-#: readelf.c:1395
+#: readelf.c:1935
msgid "UNIX - HP-UX"
msgstr ""
-#: readelf.c:1396
+#: readelf.c:1936
+msgid "UNIX - Linux"
+msgstr ""
+
+#: readelf.c:1937
msgid "Standalone App"
msgstr ""
-#: readelf.c:1413
+#: readelf.c:1938
+msgid "ARM"
+msgstr ""
+
+#: readelf.c:1955
msgid "Not an ELF file - it has the wrong magic bytes at the start\n"
msgstr ""
-#: readelf.c:1421
+#: readelf.c:1963
msgid "ELF Header:\n"
msgstr ""
-#: readelf.c:1422
+#: readelf.c:1964
msgid " Magic: "
msgstr ""
-#: readelf.c:1426
+#: readelf.c:1968
#, c-format
msgid " Class: %s\n"
msgstr ""
-#: readelf.c:1428 readelf.c:1445
+#: readelf.c:1970
#, c-format
msgid " Data: %s\n"
msgstr ""
-#: readelf.c:1430
+#: readelf.c:1972
#, c-format
msgid " Version: %d %s\n"
msgstr ""
-#: readelf.c:1435
+#: readelf.c:1979
#, c-format
msgid " OS/ABI: %s\n"
msgstr ""
-#: readelf.c:1437
+#: readelf.c:1981
#, c-format
msgid " ABI Version: %d\n"
msgstr ""
-#: readelf.c:1439
+#: readelf.c:1983
#, c-format
msgid " Type: %s\n"
msgstr ""
-#: readelf.c:1441
+#: readelf.c:1985
#, c-format
msgid " Machine: %s\n"
msgstr ""
-#: readelf.c:1443
+#: readelf.c:1987
#, c-format
msgid " Version: 0x%lx\n"
msgstr ""
-#: readelf.c:1447
-#, c-format
-msgid " Entry point address: 0x%lx\n"
+#: readelf.c:1990
+msgid " Entry point address: "
msgstr ""
-#: readelf.c:1449
-#, c-format
-msgid " Start of program headers: %ld (bytes into file)\n"
+#: readelf.c:1992
+msgid ""
+"\n"
+" Start of program headers: "
msgstr ""
-#: readelf.c:1451
-#, c-format
-msgid " Start of section headers: %ld (bytes into file)\n"
+#: readelf.c:1994
+msgid ""
+" (bytes into file)\n"
+" Start of section headers: "
+msgstr ""
+
+#: readelf.c:1996
+msgid " (bytes into file)\n"
msgstr ""
-#: readelf.c:1453
+#: readelf.c:1998
#, c-format
msgid " Flags: 0x%lx%s\n"
msgstr ""
-#: readelf.c:1456
+#: readelf.c:2001
#, c-format
msgid " Size of this header: %ld (bytes)\n"
msgstr ""
-#: readelf.c:1458
+#: readelf.c:2003
#, c-format
msgid " Size of program headers: %ld (bytes)\n"
msgstr ""
-#: readelf.c:1460
+#: readelf.c:2005
#, c-format
msgid " Number of program headers: %ld\n"
msgstr ""
-#: readelf.c:1462
+#: readelf.c:2007
#, c-format
msgid " Size of section headers: %ld (bytes)\n"
msgstr ""
-#: readelf.c:1464
+#: readelf.c:2009
#, c-format
msgid " Number of section headers: %ld\n"
msgstr ""
-#: readelf.c:1466
+#: readelf.c:2011
#, c-format
msgid " Section header string table index: %ld\n"
msgstr ""
-#: readelf.c:1476
-msgid "Not a 32 bit ELF file\n"
-msgstr ""
-
-#: readelf.c:1496
+#: readelf.c:2096
msgid ""
"\n"
"There are no program headers in this file.\n"
msgstr ""
-#: readelf.c:1502
+#: readelf.c:2102
#, c-format
msgid ""
"\n"
-"Elf file is %s\n"
+"Elf file type is %s\n"
msgstr ""
-#: readelf.c:1503
-#, c-format
-msgid "Entry point 0x%lx\n"
+#: readelf.c:2103
+msgid "Entry point "
msgstr ""
-#: readelf.c:1504
+#: readelf.c:2105
#, c-format
-msgid "There are %d program headers, starting at offset %lx:\n"
+msgid ""
+"\n"
+"There are %d program headers, starting at offset "
msgstr ""
-#: readelf.c:1517 readelf.c:1668 readelf.c:1711 readelf.c:2090 readelf.c:2214
-#: readelf.c:3115 readelf.c:3129
+#: readelf.c:2116 readelf.c:2292 readelf.c:2334 readelf.c:2377 readelf.c:2418
+#: readelf.c:2926 readelf.c:2967 readelf.c:3143 readelf.c:4102 readelf.c:4116
+#: readelf.c:7014 readelf.c:7054
msgid "Out of memory\n"
msgstr ""
-#: readelf.c:1540
+#: readelf.c:2134
#, c-format
msgid ""
"\n"
"Program Header%s:\n"
msgstr ""
-#: readelf.c:1542
+#: readelf.c:2138
msgid ""
-" Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align\n"
+" Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align\n"
msgstr ""
-#: readelf.c:1578
+#: readelf.c:2142
+msgid " Type Offset VirtAddr PhysAddr\n"
+msgstr ""
+
+#: readelf.c:2144
+msgid " FileSiz MemSiz Flags Align\n"
+msgstr ""
+
+#: readelf.c:2202
msgid "more than one dynamic segment\n"
msgstr ""
-#: readelf.c:1586
+#: readelf.c:2210
msgid "Unable to find program interpreter name\n"
msgstr ""
-#: readelf.c:1593
+#: readelf.c:2217
#, c-format
msgid ""
"\n"
" [Requesting program interpreter: %s]"
msgstr ""
-#: readelf.c:1611
+#: readelf.c:2235
msgid ""
"\n"
" Section to Segment mapping:\n"
msgstr ""
-#: readelf.c:1612
+#: readelf.c:2236
msgid " Segment Sections...\n"
msgstr ""
-#: readelf.c:1746
+#: readelf.c:2499
msgid ""
"\n"
"There are no sections in this file.\n"
msgstr ""
-#: readelf.c:1752
+#: readelf.c:2505
#, c-format
-msgid "There are %d section headers, starting at offset %lx:\n"
+msgid "There are %d section headers, starting at offset 0x%lx:\n"
msgstr ""
-#: readelf.c:1786
+#: readelf.c:2545
msgid "File contains multiple dynamic symbol tables\n"
msgstr ""
-#: readelf.c:1799
+#: readelf.c:2558
msgid "File contains multiple dynamic string tables\n"
msgstr ""
-#: readelf.c:1826
+#: readelf.c:2585
#, c-format
msgid ""
"\n"
"Section Header%s:\n"
msgstr ""
-#: readelf.c:1828
+#: readelf.c:2589
msgid ""
" [Nr] Name Type Addr Off Size ES Flg Lk "
"Inf Al\n"
msgstr ""
-#: readelf.c:1909
+#: readelf.c:2592
+msgid " [Nr] Name Type Address Offset\n"
+msgstr ""
+
+#: readelf.c:2593
+msgid " Size EntSize Flags Link Info Align\n"
+msgstr ""
+
+#: readelf.c:2640
+msgid ""
+"Key to Flags: W (write), A (alloc), X (execute), M (merge), S (strings)\n"
+msgstr ""
+
+#: readelf.c:2641
+msgid ""
+" I (info), L (link order), O (extra OS processing required)\n"
+msgstr ""
+
+#: readelf.c:2642
+msgid " o (os specific), p (processor specific) x (unknown)\n"
+msgstr ""
+
+#: readelf.c:2700
#, c-format
msgid ""
"\n"
"Relocation section at offset 0x%lx contains %ld bytes:\n"
msgstr ""
-#: readelf.c:1916
+#: readelf.c:2707
msgid ""
"\n"
"There are no dynamic relocations in this file.\n"
msgstr ""
-#: readelf.c:1943
+#: readelf.c:2735
msgid ""
"\n"
"Relocation section "
msgstr ""
-#: readelf.c:1954
+#: readelf.c:2742
#, c-format
msgid " at offset 0x%lx contains %lu entries:\n"
msgstr ""
-#: readelf.c:1982
+#: readelf.c:2770
msgid ""
"\n"
"There are no relocations in this file.\n"
msgstr ""
-#: readelf.c:2070
+#: readelf.c:3020
msgid ""
"\n"
"There is no dynamic segment in this file.\n"
msgstr ""
-#: readelf.c:2128
+#: readelf.c:3054
msgid "Unable to seek to end of file!"
msgstr ""
-#: readelf.c:2134
+#: readelf.c:3063
msgid "Unable to determine the number of symbols to load\n"
msgstr ""
-#: readelf.c:2164
+#: readelf.c:3093
msgid "Unable to seek to end of file\n"
msgstr ""
-#: readelf.c:2170
+#: readelf.c:3099
msgid "Unable to determine the length of the dynamic string table\n"
msgstr ""
-#: readelf.c:2231
+#: readelf.c:3160
#, c-format
msgid ""
"\n"
-"Dynamic segment at offset 0x%x contains %d entries:\n"
+"Dynamic segment at offset 0x%x contains %ld entries:\n"
msgstr ""
-#: readelf.c:2234
+#: readelf.c:3163
msgid " Tag Type Name/Value\n"
msgstr ""
-#: readelf.c:2241
-#, c-format
-msgid " 0x%-8.8lx (%s)%*s"
-msgstr ""
-
-#: readelf.c:2254
+#: readelf.c:3191
msgid "Auxiliary library"
msgstr ""
-#: readelf.c:2256
+#: readelf.c:3193
msgid "Filter library"
msgstr ""
-#: readelf.c:2268 readelf.c:2289 readelf.c:2315
+#: readelf.c:3209 readelf.c:3230 readelf.c:3256
msgid "Flags:"
msgstr ""
-#: readelf.c:2270 readelf.c:2291 readelf.c:2317
+#: readelf.c:3211 readelf.c:3232 readelf.c:3258
msgid " None\n"
msgstr ""
-#: readelf.c:2420
+#: readelf.c:3361
#, c-format
msgid "Shared library: [%s]"
msgstr ""
-#: readelf.c:2425
-msgid " program interpreter\n"
+#: readelf.c:3364
+msgid " program interpreter"
msgstr ""
-#: readelf.c:2429
+#: readelf.c:3368
#, c-format
-msgid "Library soname: [%s]\n"
+msgid "Library soname: [%s]"
msgstr ""
-#: readelf.c:2433
+#: readelf.c:3372
#, c-format
-msgid "Library rpath: [%s]\n"
+msgid "Library rpath: [%s]"
msgstr ""
-#: readelf.c:2485
+#: readelf.c:3433
#, c-format
msgid "Not needed object: [%s]\n"
msgstr ""
-#: readelf.c:2577
+#: readelf.c:3530
#, c-format
msgid ""
"\n"
"Version definition section '%s' contains %ld entries:\n"
msgstr ""
-#: readelf.c:2580
+#: readelf.c:3533
msgid " Addr: 0x"
msgstr ""
-#: readelf.c:2582 readelf.c:2771
+#: readelf.c:3535 readelf.c:3723
#, c-format
msgid " Offset: %#08lx Link: %lx (%s)\n"
msgstr ""
-#: readelf.c:2612
+#: readelf.c:3565
#, c-format
msgid " %#06x: Rev: %d Flags: %s"
msgstr ""
-#: readelf.c:2615
+#: readelf.c:3568
#, c-format
msgid " Index: %d Cnt: %d "
msgstr ""
-#: readelf.c:2626
+#: readelf.c:3579
#, c-format
msgid "Name: %s\n"
msgstr ""
-#: readelf.c:2628
+#: readelf.c:3581
#, c-format
msgid "Name index: %ld\n"
msgstr ""
-#: readelf.c:2643
+#: readelf.c:3596
#, c-format
msgid " %#06x: Parent %d: %s\n"
msgstr ""
-#: readelf.c:2646
+#: readelf.c:3599
#, c-format
msgid " %#06x: Parent %d, name index: %ld\n"
msgstr ""
-#: readelf.c:2665
+#: readelf.c:3618
#, c-format
msgid ""
"\n"
"Version needs section '%s' contains %ld entries:\n"
msgstr ""
-#: readelf.c:2668
+#: readelf.c:3621
msgid " Addr: 0x"
msgstr ""
-#: readelf.c:2670
+#: readelf.c:3623
#, c-format
msgid " Offset: %#08lx Link to section: %ld (%s)\n"
msgstr ""
-#: readelf.c:2696
+#: readelf.c:3649
#, c-format
msgid " %#06x: Version: %d"
msgstr ""
-#: readelf.c:2699
+#: readelf.c:3652
#, c-format
msgid " File: %s"
msgstr ""
-#: readelf.c:2701
+#: readelf.c:3654
#, c-format
msgid " File: %lx"
msgstr ""
-#: readelf.c:2703
+#: readelf.c:3656
#, c-format
msgid " Cnt: %d\n"
msgstr ""
-#: readelf.c:2721
+#: readelf.c:3674
#, c-format
msgid " %#06x: Name: %s"
msgstr ""
-#: readelf.c:2724
+#: readelf.c:3677
#, c-format
msgid " %#06x: Name index: %lx"
msgstr ""
-#: readelf.c:2727
+#: readelf.c:3680
#, c-format
msgid " Flags: %s Version: %d\n"
msgstr ""
-#: readelf.c:2766
+#: readelf.c:3718
#, c-format
msgid ""
"\n"
"Version symbols section '%s' contains %d entries:\n"
msgstr ""
-#: readelf.c:2769
+#: readelf.c:3721
msgid " Addr: "
msgstr ""
-#: readelf.c:2798
+#: readelf.c:3751
msgid " 0 (*local*) "
msgstr ""
-#: readelf.c:2802
+#: readelf.c:3755
msgid " 1 (*global*) "
msgstr ""
-#: readelf.c:3025
+#: readelf.c:3977
msgid ""
"\n"
"No version information found in this file.\n"
msgstr ""
-#: readelf.c:3038
-msgid "LOCAL"
-msgstr ""
-
-#: readelf.c:3039
-msgid "GLOBAL"
-msgstr ""
-
-#: readelf.c:3040
-msgid "WEAK"
-msgstr ""
-
-#: readelf.c:3043 readelf.c:3067
+#: readelf.c:3995 readelf.c:4030
#, c-format
msgid "<processor specific>: %d"
msgstr ""
-#: readelf.c:3045 readelf.c:3069
+#: readelf.c:3997 readelf.c:4042
#, c-format
msgid "<OS specific>: %d"
msgstr ""
-#: readelf.c:3047 readelf.c:3071
+#: readelf.c:3999 readelf.c:4045
#, c-format
msgid "<unknown>: %d"
msgstr ""
-#: readelf.c:3060
-msgid "NOTYPE"
-msgstr ""
-
-#: readelf.c:3061
-msgid "OBJECT"
-msgstr ""
-
-#: readelf.c:3062
-msgid "FUNC"
-msgstr ""
-
-#: readelf.c:3063
-msgid "SECTION"
-msgstr ""
-
-#: readelf.c:3064
-msgid "FILE"
-msgstr ""
-
-#: readelf.c:3121
+#: readelf.c:4108
msgid "Unable to read in dynamic data\n"
msgstr ""
-#: readelf.c:3163
+#: readelf.c:4150
msgid "Unable to seek to start of dynamic information"
msgstr ""
-#: readelf.c:3169
+#: readelf.c:4156
msgid "Failed to read in number of buckets\n"
msgstr ""
-#: readelf.c:3175
+#: readelf.c:4162
msgid "Failed to read in number of chains\n"
msgstr ""
-#: readelf.c:3195
+#: readelf.c:4182
msgid ""
"\n"
"Symbol table for image:\n"
msgstr ""
-#: readelf.c:3196
-msgid " Num Buc: Value Size Type Bind Ot Ndx Name\n"
+#: readelf.c:4184
+msgid " Num Buc: Value Size Type Bind Vis Ndx Name\n"
msgstr ""
-#: readelf.c:3241
+#: readelf.c:4186
+msgid " Num Buc: Value Size Type Bind Vis Ndx Name\n"
+msgstr ""
+
+#: readelf.c:4230
#, c-format
msgid ""
"\n"
"Symbol table '%s' contains %lu entries:\n"
msgstr ""
-#: readelf.c:3244
-msgid " Num: Value Size Type Bind Ot Ndx Name\n"
+#: readelf.c:4234
+msgid " Num: Value Size Type Bind Vis Ndx Name\n"
+msgstr ""
+
+#: readelf.c:4236
+msgid " Num: Value Size Type Bind Vis Ndx Name\n"
msgstr ""
-#: readelf.c:3356
+#: readelf.c:4345
msgid "bad dynamic symbol"
msgstr ""
-#: readelf.c:3415
+#: readelf.c:4404
msgid ""
"\n"
"Dynamic symbol information is not available for displaying symbols.\n"
msgstr ""
-#: readelf.c:3427
+#: readelf.c:4416
#, c-format
msgid ""
"\n"
"Histogram for bucket list length (total of %d buckets):\n"
msgstr ""
-#: readelf.c:3429
+#: readelf.c:4418
msgid " Length Number %% of total Coverage\n"
msgstr ""
-#: readelf.c:3434 readelf.c:3453 readelf.c:5336 readelf.c:5526
+#: readelf.c:4423 readelf.c:4442 readelf.c:6695 readelf.c:6888
msgid "Out of memory"
msgstr ""
-#: readelf.c:3499
+#: readelf.c:4491
#, c-format
msgid ""
"\n"
"Dynamic info segment at offset 0x%lx contains %d entries:\n"
msgstr ""
-#: readelf.c:3502
+#: readelf.c:4494
msgid " Num: Name BoundTo Flags\n"
msgstr ""
-#: readelf.c:3550
+#: readelf.c:4542
#, c-format
msgid ""
"\n"
"Assembly dump of section %s\n"
msgstr ""
-#: readelf.c:3573
+#: readelf.c:4565
#, c-format
msgid ""
"\n"
"Section '%s' has no data to dump.\n"
msgstr ""
-#: readelf.c:3578
+#: readelf.c:4570
#, c-format
msgid ""
"\n"
"Hex dump of section '%s':\n"
msgstr ""
-#: readelf.c:3728
+#: readelf.c:4722
msgid "badly formed extended line op encountered!"
msgstr ""
-#: readelf.c:3735
+#: readelf.c:4729
#, c-format
msgid " Extended opcode %d: "
msgstr ""
-#: readelf.c:3740
+#: readelf.c:4734
msgid ""
"End of Sequence\n"
"\n"
msgstr ""
-#: readelf.c:3747
+#: readelf.c:4740
#, c-format
msgid "set Address to 0x%lx\n"
msgstr ""
-#: readelf.c:3752
+#: readelf.c:4745
msgid " define new File Table entry\n"
msgstr ""
-#: readelf.c:3753 readelf.c:3871
+#: readelf.c:4746 readelf.c:4868
msgid " Entry\tDir\tTime\tSize\tName\n"
msgstr ""
-#: readelf.c:3755
+#: readelf.c:4748
#, c-format
msgid " %d\t"
msgstr ""
-#: readelf.c:3758 readelf.c:3760 readelf.c:3762 readelf.c:3883 readelf.c:3885
-#: readelf.c:3887
+#: readelf.c:4751 readelf.c:4753 readelf.c:4755 readelf.c:4880 readelf.c:4882
+#: readelf.c:4884
#, c-format
msgid "%lu\t"
msgstr ""
-#: readelf.c:3763
+#: readelf.c:4756
#, c-format
msgid ""
"%s\n"
"\n"
msgstr ""
-#: readelf.c:3767
+#: readelf.c:4760
#, c-format
msgid "UNKNOWN: length %d\n"
msgstr ""
-#: readelf.c:3789
+#: readelf.c:4786
#, c-format
msgid ""
"\n"
"\n"
msgstr ""
-#: readelf.c:3801
+#: readelf.c:4798
msgid "The line info appears to be corrupt - the section is too small\n"
msgstr ""
-#: readelf.c:3809
+#: readelf.c:4806
msgid "Only DWARF version 2 line info is currently supported.\n"
msgstr ""
-#: readelf.c:3824
+#: readelf.c:4821
#, c-format
msgid " Length: %ld\n"
msgstr ""
-#: readelf.c:3825
+#: readelf.c:4822
#, c-format
msgid " DWARF Version: %d\n"
msgstr ""
-#: readelf.c:3826
+#: readelf.c:4823
#, c-format
msgid " Prolgue Length: %d\n"
msgstr ""
-#: readelf.c:3827
+#: readelf.c:4824
#, c-format
msgid " Minimum Instruction Length: %d\n"
msgstr ""
-#: readelf.c:3828
+#: readelf.c:4825
#, c-format
msgid " Initial value of 'is_stmt': %d\n"
msgstr ""
-#: readelf.c:3829
+#: readelf.c:4826
#, c-format
msgid " Line Base: %d\n"
msgstr ""
-#: readelf.c:3830
+#: readelf.c:4827
#, c-format
msgid " Line Range: %d\n"
msgstr ""
-#: readelf.c:3831
+#: readelf.c:4828
#, c-format
msgid " Opcode Base: %d\n"
msgstr ""
-#: readelf.c:3840
+#: readelf.c:4837
msgid ""
"\n"
" Opcodes:\n"
msgstr ""
-#: readelf.c:3843
+#: readelf.c:4840
#, c-format
msgid " Opcode %d has %d args\n"
msgstr ""
-#: readelf.c:3849
+#: readelf.c:4846
msgid ""
"\n"
" The Directory Table is empty.\n"
msgstr ""
-#: readelf.c:3852
+#: readelf.c:4849
msgid ""
"\n"
" The Directory Table:\n"
msgstr ""
-#: readelf.c:3856
+#: readelf.c:4853
#, c-format
msgid " %s\n"
msgstr ""
-#: readelf.c:3867
+#: readelf.c:4864
msgid ""
"\n"
" The File Name Table is empty.\n"
msgstr ""
-#: readelf.c:3870
+#: readelf.c:4867
msgid ""
"\n"
" The File Name Table:\n"
msgstr ""
-#: readelf.c:3878
+#: readelf.c:4875
#, c-format
msgid " %d\t"
msgstr ""
-#: readelf.c:3889
+#: readelf.c:4886
#, c-format
msgid "%s\n"
msgstr ""
#. Now display the statements.
-#: readelf.c:3897
+#: readelf.c:4894
msgid ""
"\n"
" Line Number Statements:\n"
msgstr ""
-#: readelf.c:3915
+#: readelf.c:4913
msgid " Copy\n"
msgstr ""
-#: readelf.c:3922
+#: readelf.c:4920
#, c-format
msgid " Advance PC by %d to %lx\n"
msgstr ""
-#: readelf.c:3930
+#: readelf.c:4928
#, c-format
msgid " Advance Line by %d to %d\n"
msgstr ""
-#: readelf.c:3937
+#: readelf.c:4935
#, c-format
msgid " Set File Name to entry %d in the File Name Table\n"
msgstr ""
-#: readelf.c:3945
+#: readelf.c:4943
#, c-format
msgid " Set column to %d\n"
msgstr ""
-#: readelf.c:3952
+#: readelf.c:4950
#, c-format
msgid " Set is_stmt to %d\n"
msgstr ""
-#: readelf.c:3957
+#: readelf.c:4955
msgid " Set basic block\n"
msgstr ""
-#: readelf.c:3964
+#: readelf.c:4963
#, c-format
msgid " Advance PC by constant %d to 0x%lx\n"
msgstr ""
-#: readelf.c:3972
+#: readelf.c:4971
#, c-format
msgid " Advance PC by fixed size amount %d to 0x%lx\n"
msgstr ""
-#: readelf.c:3980
+#: readelf.c:4979
#, c-format
msgid " Special opcode %d: advance Address by %d to 0x%lx"
msgstr ""
-#: readelf.c:3984
+#: readelf.c:4983
#, c-format
msgid " and Line by %d to %d\n"
msgstr ""
-#: readelf.c:4007 readelf.c:4426
+#: readelf.c:5006 readelf.c:5428
#, c-format
msgid ""
"Contents of the %s section:\n"
"\n"
msgstr ""
-#: readelf.c:4026
+#: readelf.c:5025
msgid "Only DWARF 2 pubnames are currently supported"
msgstr ""
-#: readelf.c:4030
+#: readelf.c:5029
#, c-format
msgid " Length: %ld\n"
msgstr ""
-#: readelf.c:4032
+#: readelf.c:5031
#, c-format
msgid " Version: %d\n"
msgstr ""
-#: readelf.c:4034
+#: readelf.c:5033
#, c-format
msgid " Offset into .debug_info section: %ld\n"
msgstr ""
-#: readelf.c:4036
+#: readelf.c:5035
#, c-format
msgid " Size of area in .debug_info section: %ld\n"
msgstr ""
-#: readelf.c:4039
+#: readelf.c:5038
msgid ""
"\n"
" Offset\tName\n"
msgstr ""
-#: readelf.c:4121
+#: readelf.c:5120
#, c-format
msgid "Unknown TAG value: %lx"
msgstr ""
-#: readelf.c:4216
+#: readelf.c:5215
#, c-format
msgid "Unknown AT value: %lx"
msgstr ""
-#: readelf.c:4253
+#: readelf.c:5252
#, c-format
msgid "Unknown FORM value: %lx"
msgstr ""
-#: readelf.c:4432
+#: readelf.c:5434
msgid " Number TAG\n"
msgstr ""
-#: readelf.c:4438
+#: readelf.c:5440
#, c-format
msgid " %ld %s [%s]\n"
msgstr ""
-#: readelf.c:4441
+#: readelf.c:5443
msgid "has children"
msgstr ""
-#: readelf.c:4441
+#: readelf.c:5443
msgid "no children"
msgstr ""
-#: readelf.c:4445
+#: readelf.c:5447
#, c-format
msgid " %-18s %s\n"
msgstr ""
-#: readelf.c:4464
+#: readelf.c:5466
#, c-format
msgid " %lu byte block: "
msgstr ""
-#: readelf.c:4633
+#: readelf.c:5930
msgid "(User defined location op)"
msgstr ""
-#: readelf.c:4635
+#: readelf.c:5932
msgid "(Unknown location op)"
msgstr ""
-#: readelf.c:4752
+#: readelf.c:6049
#, c-format
msgid "Unable to handle FORM: %d"
msgstr ""
-#: readelf.c:4756
+#: readelf.c:6053
#, c-format
msgid "Unrecognised form: %d"
msgstr ""
-#: readelf.c:4769
+#: readelf.c:6066
msgid "(not inlined)"
msgstr ""
-#: readelf.c:4770
+#: readelf.c:6067
msgid "(inlined)"
msgstr ""
-#: readelf.c:4771
+#: readelf.c:6068
msgid "(declared as inline but ignored)"
msgstr ""
-#: readelf.c:4772
+#: readelf.c:6069
msgid "(declared as inline and inlined)"
msgstr ""
-#: readelf.c:4773
+#: readelf.c:6070
#, c-format
msgid " (Unknown inline attribute value: %lx)"
msgstr ""
-#: readelf.c:4903 readelf.c:5027
+#: readelf.c:6200 readelf.c:6324
#, c-format
msgid ""
"The section %s contains:\n"
"\n"
msgstr ""
-#: readelf.c:4925
+#: readelf.c:6222
msgid "Only version 2 DWARF debug information is currently supported.\n"
msgstr ""
-#: readelf.c:4929
+#: readelf.c:6226
msgid " Compilation Unit:\n"
msgstr ""
-#: readelf.c:4930
+#: readelf.c:6227
#, c-format
msgid " Length: %ld\n"
msgstr ""
-#: readelf.c:4931
+#: readelf.c:6228
#, c-format
msgid " Version: %d\n"
msgstr ""
-#: readelf.c:4932
+#: readelf.c:6229
#, c-format
msgid " Abbrev Offset: %ld\n"
msgstr ""
-#: readelf.c:4933
+#: readelf.c:6230
#, c-format
msgid " Pointer Size: %d\n"
msgstr ""
-#: readelf.c:4953
+#: readelf.c:6250
msgid "Unable to locate .debug_abbrev section!\n"
msgstr ""
-#: readelf.c:4993
+#: readelf.c:6290
#, c-format
-msgid "Unable to locate entry %d in the abbreviation table\n"
+msgid "Unable to locate entry %lu in the abbreviation table\n"
msgstr ""
-#: readelf.c:4998
+#: readelf.c:6295
#, c-format
-msgid " <%d><%x>: Abbrev Number: %d (%s)\n"
+msgid " <%d><%x>: Abbrev Number: %lu (%s)\n"
msgstr ""
-#: readelf.c:5045
+#: readelf.c:6343
#, c-format
msgid " Length: %ld\n"
msgstr ""
-#: readelf.c:5046
+#: readelf.c:6344
#, c-format
msgid " Version: %d\n"
msgstr ""
-#: readelf.c:5047
+#: readelf.c:6345
#, c-format
msgid " Offset into .debug_info: %lx\n"
msgstr ""
-#: readelf.c:5048
+#: readelf.c:6346
#, c-format
msgid " Pointer Size: %d\n"
msgstr ""
-#: readelf.c:5049
+#: readelf.c:6347
#, c-format
msgid " Segment Size: %d\n"
msgstr ""
-#: readelf.c:5051
+#: readelf.c:6349
msgid ""
"\n"
" Address Length\n"
msgstr ""
-#: readelf.c:5086
+#: readelf.c:6390
#, c-format
msgid "Displaying the debug contents of section %s is not yet supported.\n"
msgstr ""
-#: readelf.c:5128
+#: readelf.c:6452
#, c-format
msgid ""
"\n"
"Section '%s' has no debugging data.\n"
msgstr ""
-#: readelf.c:5144
+#: readelf.c:6468
#, c-format
msgid "Unrecognised debug section: %s\n"
msgstr ""
-#: readelf.c:5183
+#: readelf.c:6540
msgid "Some sections were not dumped because they do not exist!\n"
msgstr ""
-#: readelf.c:5358
+#: readelf.c:6719
#, c-format
msgid ""
"\n"
"Section '%s' contains %d entries:\n"
msgstr ""
-#: readelf.c:5519
+#: readelf.c:6881
msgid "conflict list with without table"
msgstr ""
-#: readelf.c:5547
+#: readelf.c:6909
#, c-format
msgid ""
"\n"
"Section '.conflict' contains %d entries:\n"
msgstr ""
-#: readelf.c:5548
+#: readelf.c:6910
msgid " Num: Index Value Name"
msgstr ""
-#: readelf.c:5625
+#: readelf.c:6935
+msgid "NT_PRSTATUS (prstatus structure)"
+msgstr ""
+
+#: readelf.c:6936
+msgid "NT_FPREGSET (floating point registers)"
+msgstr ""
+
+#: readelf.c:6937
+msgid "NT_PRPSINFO (prpsinfo structure)"
+msgstr ""
+
+#: readelf.c:6938
+msgid "NT_TASKSTRUCT (task structure)"
+msgstr ""
+
+#: readelf.c:6939
+msgid "NT_PRXFPREG (user_xfpregs structure)"
+msgstr ""
+
+#: readelf.c:6940
+msgid "NT_PSTATUS (pstatus structure)"
+msgstr ""
+
+#: readelf.c:6941
+msgid "NT_FPREGS (floating point registers)"
+msgstr ""
+
+#: readelf.c:6942
+msgid "NT_PSINFO (psinfo structure)"
+msgstr ""
+
+#: readelf.c:6943
+msgid "NT_LWPSTATUS (lwpstatus_t structure)"
+msgstr ""
+
+#: readelf.c:6944
+msgid "NT_LWPSINFO (lwpsinfo_t structure)"
+msgstr ""
+
+#: readelf.c:6945
+msgid "NT_WIN32PSTATUS (win32_pstatus strcuture)"
+msgstr ""
+
+#: readelf.c:6947
+#, c-format
+msgid "Unknown note type: (0x%08x)"
+msgstr ""
+
+#: readelf.c:6985
+#, c-format
+msgid ""
+"\n"
+"Notes at offset 0x%08lx with length 0x%08lx:\n"
+msgstr ""
+
+#: readelf.c:6988
+msgid " Owner\t\tData size\tDescription\n"
+msgstr ""
+
+#: readelf.c:7099
+msgid "No note segments present in the core file.\n"
+msgstr ""
+
+#: readelf.c:7177
+msgid "This instance of readelf has been built without support for a\n"
+msgstr ""
+
+#: readelf.c:7178
+msgid "64 bit data type and so it cannot read 64 bit ELF files.\n"
+msgstr ""
+
+#: readelf.c:7213
#, c-format
msgid "Cannot stat input file %s.\n"
msgstr ""
-#: readelf.c:5632
+#: readelf.c:7220
#, c-format
msgid "Input file %s not found.\n"
msgstr ""
-#: readelf.c:5638
+#: readelf.c:7226
#, c-format
msgid "%s: Failed to read file header\n"
msgstr ""
-#: readelf.c:5652
+#: readelf.c:7240
#, c-format
msgid ""
"\n"
"File: %s\n"
msgstr ""
-#: rename.c:121
+#: rename.c:131
#, c-format
msgid "%s: cannot set time: %s"
msgstr ""
#. We have to clean up here.
-#: rename.c:160 rename.c:193
+#: rename.c:170 rename.c:203
#, c-format
msgid "%s: rename: %s"
msgstr ""
-#: rename.c:201
+#: rename.c:211
#, c-format
msgid "%s: simple_copy: %s"
msgstr ""
msgid "filename required for COFF output"
msgstr ""
-#: rescoff.c:734
+#: rescoff.c:740
msgid "can't get BFD_RELOC_RVA relocation type"
msgstr ""
-#: resrc.c:253
+#: resrc.c:240 resrc.c:312
+#, c-format
+msgid "can't open temporary file `%s': %s"
+msgstr ""
+
+#: resrc.c:246
+#, c-format
+msgid "can't redirect stdout: `%s': %s"
+msgstr ""
+
+#: resrc.c:262
+#, c-format
+msgid "%s %s: %s"
+msgstr ""
+
+#: resrc.c:283
+#, c-format
+msgid "%s exited with status %d"
+msgstr ""
+
+#: resrc.c:308
+#, c-format
+msgid "can't execute `%s': %s"
+msgstr ""
+
+#: resrc.c:317
+#, c-format
+msgid "Using temporary file `%s' to read preprocessor output\n"
+msgstr ""
+
+#: resrc.c:324
#, c-format
msgid "can't popen `%s': %s"
msgstr ""
-#: resrc.c:266
+#: resrc.c:326
+msgid "Using popen to read preprocessor output\n"
+msgstr ""
+
+#: resrc.c:369
+#, c-format
+msgid "Tried `%s'\n"
+msgstr ""
+
+#: resrc.c:380
+#, c-format
+msgid "Using `%s'\n"
+msgstr ""
+
+#: resrc.c:544
#, c-format
-msgid "%s: warning: preprocessor failed\n"
+msgid "%s:%d: %s\n"
msgstr ""
-#: resrc.c:311
+#: resrc.c:553
#, c-format
msgid "%s: unexpected EOF"
msgstr ""
-#: resrc.c:368
+#: resrc.c:610
#, c-format
msgid "%s: read of %lu returned %lu"
msgstr ""
-#: resrc.c:410 resrc.c:641 resrc.c:914 resrc.c:1068
+#: resrc.c:652 resrc.c:883 resrc.c:1156 resrc.c:1310
#, c-format
msgid "stat failed on bitmap file `%s': %s"
msgstr ""
-#: resrc.c:463
+#: resrc.c:705
#, c-format
msgid "cursor file `%s' does not contain cursor data"
msgstr ""
-#: resrc.c:495 resrc.c:785
+#: resrc.c:737 resrc.c:1027
#, c-format
msgid "%s: fseek to %lu failed: %s"
msgstr ""
-#: resrc.c:754
+#: resrc.c:996
#, c-format
msgid "icon file `%s' does not contain icon data"
msgstr ""
-#: resrc.c:1273
+#: resrc.c:1515
#, c-format
msgid "can't open `%s' for output: %s"
msgstr ""
msgid "%s: unable to open output file %s\n"
msgstr ""
-#: stabs.c:349 stabs.c:1762
+#: stabs.c:349 stabs.c:1769
msgid "numeric overflow"
msgstr ""
#. Does this actually ever happen? Is that why we are worrying
#. about dealing with it rather than just calling error_type?
-#: stabs.c:1854
+#: stabs.c:1861
msgid "missing index type"
msgstr ""
-#: stabs.c:2181
+#: stabs.c:2188
msgid "unknown virtual character for baseclass"
msgstr ""
-#: stabs.c:2199
+#: stabs.c:2206
msgid "unknown visibility character for baseclass"
msgstr ""
-#: stabs.c:2391
+#: stabs.c:2398
msgid "unnamed $vb type"
msgstr ""
-#: stabs.c:2397
+#: stabs.c:2404
msgid "unrecognized C++ abbreviation"
msgstr ""
-#: stabs.c:2477
+#: stabs.c:2484
msgid "unknown visibility character for field"
msgstr ""
-#: stabs.c:2733
+#: stabs.c:2740
msgid "const/volatile indicator missing"
msgstr ""
-#: stabs.c:2973
+#: stabs.c:2980
#, c-format
msgid "No mangling for \"%s\"\n"
msgstr ""
-#: stabs.c:3286
+#: stabs.c:3293
msgid "Undefined N_EXCL"
msgstr ""
-#: stabs.c:3374
+#: stabs.c:3381
#, c-format
msgid "Type file number %d out of range\n"
msgstr ""
-#: stabs.c:3379
+#: stabs.c:3386
#, c-format
msgid "Type index number %d out of range\n"
msgstr ""
-#: stabs.c:3466
+#: stabs.c:3473
#, c-format
msgid "Unrecognized XCOFF type %d\n"
msgstr ""
-#: stabs.c:3765
+#: stabs.c:3772
#, c-format
msgid "bad mangled name `%s'\n"
msgstr ""
-#: stabs.c:3861
+#: stabs.c:3868
msgid "no argument types in mangled string\n"
msgstr ""
"the GNU General Public License. This program has absolutely no warranty.\n"
msgstr ""
-#: windres.c:233
+#: windres.c:237
#, c-format
msgid "can't open %s `%s': %s"
msgstr ""
-#: windres.c:412
+#: windres.c:416
msgid ": expected to be a directory\n"
msgstr ""
-#: windres.c:424
+#: windres.c:428
msgid ": expected to be a leaf\n"
msgstr ""
-#: windres.c:433
+#: windres.c:437
#, c-format
msgid "%s: warning: "
msgstr ""
-#: windres.c:435
+#: windres.c:439
msgid ": duplicate value\n"
msgstr ""
-#: windres.c:598
+#: windres.c:602
#, c-format
msgid "%s: unknown format type `%s'\n"
msgstr ""
-#: windres.c:599
+#: windres.c:603
#, c-format
msgid "%s: supported formats:"
msgstr ""
#. Otherwise, we give up.
-#: windres.c:686
+#: windres.c:690
#, c-format
msgid "can not determine type of file `%s'; use the -I option"
msgstr ""
-#: windres.c:700
+#: windres.c:704
#, c-format
msgid "Usage: %s [options] [input-file] [output-file]\n"
msgstr ""
-#: windres.c:702
+#: windres.c:706
msgid ""
"Options:\n"
" -i FILE, --input FILE Name input file\n"
" -DSYM[=VAL], --define SYM[=VAL]\n"
" Define SYM when preprocessing rc file\n"
" -v Verbose - tells you what it's doing\n"
-"\n"
+" --language VAL Set language when reading rc file\n"
+" --use-temp-file Use a temporary file instead of popen to read\n"
+" the preprocessor output\n"
+" --no-use-temp-file Use popen (default)\n"
msgstr ""
-#: windres.c:718
+#: windres.c:725
msgid " --yydebug Turn on parser debugging\n"
msgstr ""
-#: windres.c:721
+#: windres.c:728
msgid ""
" --help Print this help message\n"
" --version Print version information\n"
msgstr ""
-#: windres.c:724
+#: windres.c:731
msgid ""
"FORMAT is one of rc, res, or coff, and is deduced from the file name\n"
"extension if not specified. A single file name is an input file.\n"
"No input-file is stdin, default rc. No output-file is stdout, default rc.\n"
msgstr ""
-#: windres.c:963
+#: windres.c:980
msgid "no resources"
msgstr ""
# Makefile.in generated automatically by automake 1.4 from Makefile.am
-# Copyright (C) 1994-99, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
OPCODES_LIB = @OPCODES_LIB@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
RANLIB = @RANLIB@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
atof = @atof@
cgen_cpu_prefix = @cgen_cpu_prefix@
AC_SUBST($1)])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-bfd-assembler use BFD back end for writing object files"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13.1"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:570: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_host_alias=$host
- case "$ac_cv_host_alias" in
- NONE)
- case $nonopt in
- NONE)
- if ac_cv_host_alias=`$ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) ac_cv_host_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
- ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:611: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_target_alias=$target
- case "$ac_cv_target_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_target_alias=$host_alias ;;
-
- *) ac_cv_target_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
- ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:651: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_build_alias=$build
- case "$ac_cv_build_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_build_alias=$host_alias ;;
-
- *) ac_cv_build_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
- ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:607: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:628: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:646: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:728: checking for a BSD compatible install" >&5
+echo "configure:681: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:785: checking whether build environment is sane" >&5
+echo "configure:734: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},;$program_transform_name"
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:842: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:791: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:888: checking for working aclocal" >&5
+echo "configure:837: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:901: checking for working autoconf" >&5
+echo "configure:850: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:914: checking for working automake" >&5
+echo "configure:863: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:927: checking for working autoheader" >&5
+echo "configure:876: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:940: checking for working makeinfo" >&5
+echo "configure:889: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1026: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:975: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1056: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1005: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1086: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1035: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1137: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1086: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1169: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1118: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1180 "configure"
+#line 1129 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1211: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1160: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1216: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:1165: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1225: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1244: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:1193: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1287: checking for ld used by GCC" >&5
+echo "configure:1236: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1311: checking for GNU ld" >&5
+echo "configure:1260: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1314: checking for non-GNU ld" >&5
+echo "configure:1263: checking for non-GNU ld" >&5
fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1350: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1298: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1366: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1314: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1404: checking command to parse $NM output" >&5
-if eval "test \"\${ac_cv_sys_global_symbol_pipe+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1467: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1471: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1569: checking for _ prefix in compiled symbols" >&5
-if eval "test \"\${ac_cv_sys_symbol_underscore+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1578: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1581: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1607: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1350: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
echo "$ac_t""no" 1>&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1649 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1399 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1671: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1421: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1676 "configure"
+#line 1426 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1706: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1738: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1773: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1805: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
arm-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
arm-*-oabi | thumb-*-oabi) fmt=elf ;;
arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;;
- arm-*-wince) fmt=coff em=wince-pe bfd_gas=yes;;
+ arm-*-wince) fmt=coff em=wince-pe bfd_gas=yes;;
arm-*-pe | thumb-*-pe) fmt=coff em=pe ;;
arm-*-riscix*) fmt=aout em=riscix ;;
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2758: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2360: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2788: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2390: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2839: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2441: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2871: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:2473: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2882 "configure"
+#line 2484 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2913: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2515: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2918: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:2520: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2946: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2548: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2983: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_YACC+set}\" = set"; then
+echo "configure:2585: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$YACC"; then
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:3014: checking how to run the C preprocessor" >&5
+echo "configure:2616: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 3029 "configure"
+#line 2631 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 3046 "configure"
+#line 2648 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2654: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 3063 "configure"
+#line 2665 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3099: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_LEX+set}\" = set"; then
+echo "configure:2701: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$LEX"; then
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3132: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_LEX+set}\" = set"; then
+echo "configure:2734: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$LEX"; then
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:3166: checking for yywrap in -l$ac_lib" >&5
-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:2768: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3174 "configure"
+#line 2776 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:3185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:3208: checking lex output file root" >&5
-if eval "test \"\${ac_cv_prog_lex_root+set}\" = set"; then
+echo "configure:2810: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# The minimal lex program is just a single line: %%. But some broken lexes
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:3229: checking whether yytext is a pointer" >&5
-if eval "test \"\${ac_cv_prog_lex_yytext_pointer+set}\" = set"; then
+echo "configure:2831: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# POSIX says lex can declare yytext either as a pointer or an array; the
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 3241 "configure"
+#line 2843 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
ALL_LINGUAS=
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:3272: checking for POSIXized ISC" >&5
+echo "configure:2874: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:3293: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2895: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3298 "configure"
+#line 2900 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3306: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 2925 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3341 "configure"
+#line 2943 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 3362 "configure"
+#line 2964 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:3373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3397: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2999: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3402 "configure"
+#line 3004 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3451: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3472: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:3074: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 3479 "configure"
+#line 3081 "configure"
#include "confdefs.h"
int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:3486: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3088: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3512: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:3114: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3517 "configure"
+#line 3119 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_off_t=yes"
+ ac_cv_type_off_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_off_t=no"
+ ac_cv_type_off_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
#define off_t long
EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3547: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:3147: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3552 "configure"
+#line 3152 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_size_t=yes"
+ ac_cv_type_size_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_size_t=no"
+ ac_cv_type_size_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3584: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:3182: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3589 "configure"
+#line 3187 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:3596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3617: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:3215: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3622 "configure"
+#line 3220 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:3650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3682: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:3280: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3687 "configure"
+#line 3285 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3712: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3310: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3717 "configure"
+#line 3315 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3768: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:3365: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3776 "configure"
+#line 3373 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3820: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3417: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3825 "configure"
+#line 3422 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3427: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3859: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3456: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3864 "configure"
+#line 3461 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3913: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:3509: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3921 "configure"
+#line 3517 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:4061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4089: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3685: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4094 "configure"
+#line 3690 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4129: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3725: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4134 "configure"
+#line 3730 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4187: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3782: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4192 "configure"
+#line 3787 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:4216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4250: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3844: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4255 "configure"
+#line 3849 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4283: checking whether NLS is requested" >&5
+echo "configure:3877: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4303: checking whether included gettext is requested" >&5
+echo "configure:3897: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4322: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3916: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4327 "configure"
+#line 3921 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4332: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4349: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3943: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4354 "configure"
+#line 3948 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4377: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3971: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4385 "configure"
+#line 3979 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:4396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4412: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:4006: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4417 "configure"
+#line 4011 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4452: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:4046: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4486: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4080: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4491 "configure"
+#line 4085 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:4515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4542: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:4135: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4578: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:4171: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
fi
cat > conftest.$ac_ext <<EOF
-#line 4610 "configure"
+#line 4203 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:4618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4650: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:4243: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4684: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:4277: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4720: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:4313: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4810: checking for catalogs to be installed" >&5
+echo "configure:4403: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4838: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4431: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4843 "configure"
+#line 4436 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4441: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4911: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4504: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4934: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:4527: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4939 "configure"
+#line 4532 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:4950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4543: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
ac_cv_cygwin=no
fi
rm -f conftest*
+rm -f conftest*
fi
echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4966: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:4560: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4971 "configure"
+#line 4565 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:4978: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
ac_cv_mingw32=no
fi
rm -f conftest*
+rm -f conftest*
fi
echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:4994: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4999 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:5006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_emxos2=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:5025: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:4591: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
ac_cv_exeext=.exe
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:5035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.C | *.o | *.obj | *.xcoff) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5060: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4626: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5065 "configure"
+#line 4631 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5070: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4636: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:5100: checking whether compiling a cross-assembler" >&5
+echo "configure:4666: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5115: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:4681: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5120 "configure"
+#line 4686 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:5127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5148: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:4714: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5153 "configure"
+#line 4719 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:5181: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5213: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:4779: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5218 "configure"
+#line 4784 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5243: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4809: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5248 "configure"
+#line 4814 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:5272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5299: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:4864: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 5307 "configure"
+#line 4872 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:5326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:5348: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:4913: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 5355 "configure"
+#line 4920 "configure"
#include "confdefs.h"
int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:5362: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5392: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4957: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5397 "configure"
+#line 4962 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:5421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5450: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:5014: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5455 "configure"
+#line 5019 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:5479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5508: checking for working assert macro" >&5
-if eval "test \"\${gas_cv_assert_ok+set}\" = set"; then
+echo "configure:5071: checking for working assert macro" >&5
+if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5513 "configure"
+#line 5076 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:5529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5570: checking whether declaration is required for strstr" >&5
-if eval "test \"\${gas_cv_decl_needed_strstr+set}\" = set"; then
+echo "configure:5133: checking whether declaration is required for strstr" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5575 "configure"
+#line 5138 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5607: checking whether declaration is required for malloc" >&5
-if eval "test \"\${gas_cv_decl_needed_malloc+set}\" = set"; then
+echo "configure:5170: checking whether declaration is required for malloc" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5612 "configure"
+#line 5175 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5644: checking whether declaration is required for free" >&5
-if eval "test \"\${gas_cv_decl_needed_free+set}\" = set"; then
+echo "configure:5207: checking whether declaration is required for free" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5649 "configure"
+#line 5212 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5681: checking whether declaration is required for sbrk" >&5
-if eval "test \"\${gas_cv_decl_needed_sbrk+set}\" = set"; then
+echo "configure:5244: checking whether declaration is required for sbrk" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5686 "configure"
+#line 5249 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5718: checking whether declaration is required for environ" >&5
-if eval "test \"\${gas_cv_decl_needed_environ+set}\" = set"; then
+echo "configure:5281: checking whether declaration is required for environ" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5723 "configure"
+#line 5286 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5734: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_environ=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5758: checking whether declaration is required for errno" >&5
-if eval "test \"\${gas_cv_decl_needed_errno+set}\" = set"; then
+echo "configure:5321: checking whether declaration is required for errno" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5763 "configure"
+#line 5326 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:5778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@SET_MAKE@%$SET_MAKE%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@GDBINIT@%$GDBINIT%g
s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LEX = @LEX@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
OPCODES_LIB = @OPCODES_LIB@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
RANLIB = @RANLIB@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
YACC = @YACC@
atof = @atof@
cgen.h
cond.c
cond.c
+config/e-i386aout.c
config/e-i386coff.c
config/e-i386elf.c
config/e-mipsecoff.c
config/tc-d10v.h
config/tc-d30v.c
config/tc-d30v.h
+config/tc-fr30.c
+config/tc-fr30.h
config/tc-h8300.c
config/tc-h8300.h
config/tc-h8500.c
config/tc-h8500.h
config/tc-hppa.c
config/tc-hppa.h
+config/tc-i370.c
+config/tc-i370.h
config/tc-i386.c
config/tc-i386.h
config/tc-i860.c
config/tc-mn10300.h
config/tc-ns32k.c
config/tc-ns32k.h
+config/tc-pj.c
+config/tc-pj.h
config/tc-ppc.c
config/tc-ppc.h
config/tc-sh.c
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 03:00-0700\n"
+"POT-Creation-Date: 2000-02-27 11:37-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
-#: app.c:448 app.c:462
+#: app.c:466 app.c:480
msgid "end of file in comment"
msgstr ""
-#: app.c:541
+#: app.c:559
msgid "end of file in string: inserted '\"'"
msgstr ""
-#: app.c:607
+#: app.c:625
#, c-format
msgid "Unknown escape '\\%c' in string: Ignored"
msgstr ""
-#: app.c:616
+#: app.c:634
msgid "End of file in string: '\"' inserted"
msgstr ""
-#: app.c:736
+#: app.c:754
msgid "end of file not at end of a line; newline inserted"
msgstr ""
-#: app.c:882
+#: app.c:911
msgid "end of file in multiline comment"
msgstr ""
-#: app.c:931
+#: app.c:960
msgid "end of file after a one-character quote; \\0 inserted"
msgstr ""
-#: app.c:939
+#: app.c:968
msgid "end of file in escape character"
msgstr ""
-#: app.c:951
+#: app.c:980
msgid "Missing close quote: (assumed)"
msgstr ""
-#: app.c:1010 app.c:1064 app.c:1133
+#: app.c:1043 app.c:1097 app.c:1166
msgid "end of file in comment; newline inserted"
msgstr ""
-#: app.c:1074
+#: app.c:1107
msgid "EOF in Comment: Newline inserted"
msgstr ""
-#: as.c:121
+#: as.c:148
+msgid "missing emulation mode name"
+msgstr ""
+
+#: as.c:163
+#, c-format
+msgid "unrecognized emulation name `%s'"
+msgstr ""
+
+#: as.c:210
#, c-format
msgid "GNU assembler version %s (%s) using BFD version %s"
msgstr ""
-#: as.c:124
+#: as.c:213
#, c-format
msgid "GNU assembler version %s (%s)"
msgstr ""
-#: as.c:133
+#: as.c:222
#, c-format
msgid "Usage: %s [option...] [asmfile...]\n"
msgstr ""
-#: as.c:135
+#: as.c:224
msgid ""
"Options:\n"
-" -a[sub-option...]\tturn on listings\n"
-" Sub-options [default hls]:\n"
-" c omit false conditionals\n"
-" d omit debugging directives\n"
-" h include high-level source\n"
-" l include assembly\n"
-" m include macro expansions\n"
-" n omit forms processing\n"
-" s include symbols\n"
-" L include line debug statistics (if applicable)\n"
-" =file set listing file name (must be last sub-option)\n"
-msgstr ""
-
-#: as.c:149
+" -a[sub-option...]\t turn on listings\n"
+" \t Sub-options [default hls]:\n"
+" \t c omit false conditionals\n"
+" \t d omit debugging directives\n"
+" \t h include high-level source\n"
+" \t l include assembly\n"
+" \t m include macro expansions\n"
+" \t n omit forms processing\n"
+" \t s include symbols\n"
+" \t L include line debug statistics (if "
+"applicable)\n"
+" \t =FILE list to FILE (must be last sub-option)\n"
+msgstr ""
+
+#: as.c:238
+msgid " -D produce assembler debugging messages\n"
+msgstr ""
+
+#: as.c:240
+msgid " --defsym SYM=VAL define symbol SYM to given value\n"
+msgstr ""
+
+#: as.c:256
+#, c-format
+msgid " emulate output (default %s)\n"
+msgstr ""
+
+#: as.c:260
+msgid " -f skip whitespace and comment preprocessing\n"
+msgstr ""
+
+#: as.c:262
+msgid " --gstabs generate stabs debugging information\n"
+msgstr ""
+
+#: as.c:264
+msgid " --gdwarf2 generate DWARF2 debugging information\n"
+msgstr ""
+
+#: as.c:266
+msgid " --help show this message and exit\n"
+msgstr ""
+
+#: as.c:268
+msgid ""
+" -I DIR add DIR to search list for .include directives\n"
+msgstr ""
+
+#: as.c:270
+msgid " -J don't warn about signed overflow\n"
+msgstr ""
+
+#: as.c:272
msgid ""
-" -D\t\t produce assembler debugging messages\n"
-" --defsym SYM=VAL define symbol SYM to given value\n"
-" -f\t\t skip whitespace and comment preprocessing\n"
-" --gstabs\t generate stabs debugging information\n"
-" --help\t\t show this message and exit\n"
-" -I DIR\t\t add DIR to search list for .include directives\n"
-" -J\t\t don't warn about signed overflow\n"
-" -K\t\t warn when differences altered for long displacements\n"
-" -L,--keep-locals keep local symbols (e.g. starting with `L')\n"
-msgstr ""
-
-#: as.c:160
+" -K warn when differences altered for long "
+"displacements\n"
+msgstr ""
+
+#: as.c:274
+msgid " -L,--keep-locals keep local symbols (e.g. starting with `L')\n"
+msgstr ""
+
+#: as.c:276
+msgid " -M,--mri assemble in MRI compatibility mode\n"
+msgstr ""
+
+#: as.c:278
+msgid ""
+" --MD FILE write dependency information in FILE (default "
+"none)\n"
+msgstr ""
+
+#: as.c:280
+msgid " -nocpp ignored\n"
+msgstr ""
+
+#: as.c:282
+msgid ""
+" -o OBJFILE name the object-file output OBJFILE (default "
+"a.out)\n"
+msgstr ""
+
+#: as.c:284
+msgid " -R fold data section into text section\n"
+msgstr ""
+
+#: as.c:286
+msgid ""
+" --statistics print various measured statistics from execution\n"
+msgstr ""
+
+#: as.c:288
+msgid " --strip-local-absolute strip local absolute symbols\n"
+msgstr ""
+
+#: as.c:290
+msgid ""
+" --traditional-format Use same format as native assembler when possible\n"
+msgstr ""
+
+#: as.c:292
+msgid " --version print assembler version number and exit\n"
+msgstr ""
+
+#: as.c:294
+msgid " -W --no-warn suppress warnings\n"
+msgstr ""
+
+#: as.c:296
+msgid " --warn don't suppress warnings\n"
+msgstr ""
+
+#: as.c:298
+msgid " --fatal-warnings treat warnings as errors\n"
+msgstr ""
+
+#: as.c:300
msgid ""
-" -M,--mri\t assemble in MRI compatibility mode\n"
-" --MD FILE\t write dependency information in FILE (default none)\n"
-" -nocpp\t\t ignored\n"
-" -o OBJFILE\t name the object-file output OBJFILE (default a.out)\n"
-" -R\t\t fold data section into text section\n"
-" --statistics\t print various measured statistics from execution\n"
-" --strip-local-absolute strip local absolute symbols\n"
-" --traditional-format\t Use same format as native assembler when possible\n"
-" --version\t\t print assembler version number and exit\n"
-" -W\t\t\t suppress warnings\n"
-" --itbl INSTTBL\t extend instruction set to include instructions\n"
-"\t\t\t matching the specifications defined in file INSTTBL\n"
-" -w\t\t\t ignored\n"
-" -X\t\t\t ignored\n"
-" -Z\t\t\t generate object file even after errors\n"
-msgstr ""
-
-#: as.c:177
+" --itbl INSTTBL extend instruction set to include instructions\n"
+" matching the specifications defined in file "
+"INSTTBL\n"
+msgstr ""
+
+#: as.c:303
+msgid " -w ignored\n"
+msgstr ""
+
+#: as.c:305
+msgid " -X ignored\n"
+msgstr ""
+
+#: as.c:307
+msgid " -Z generate object file even after errors\n"
+msgstr ""
+
+#: as.c:309
msgid ""
-" --listing-lhs-width\t set the width in words of the output data column "
+" --listing-lhs-width set the width in words of the output data column "
"of\n"
-"\t\t\t the listing\n"
-" --listing-lhs-width2\t set the width in words of the continuation lines\n"
-"\t\t\t of the output data column; ignored if smaller than\n"
-"\t\t\t the width of the first line\n"
-" --listing-rhs-width\t set the max width in characters of the lines from\n"
-"\t\t\t the source file\n"
-" --listing-cont-lines\t set the maximum number of continuation lines used\n"
-"\t\t\t for the output data column of the listing\n"
+" the listing\n"
msgstr ""
-#: as.c:190 gasp.c:3588
+#: as.c:312
msgid ""
-"\n"
-"Report bugs to bug-gnu-utils@gnu.org\n"
+" --listing-lhs-width2 set the width in words of the continuation lines\n"
+" of the output data column; ignored if smaller "
+"than\n"
+" the width of the first line\n"
msgstr ""
-#: as.c:227
-msgid "missing emulation mode name"
+#: as.c:316
+msgid ""
+" --listing-rhs-width set the max width in characters of the lines from\n"
+" the source file\n"
msgstr ""
-#: as.c:242
-#, c-format
-msgid "unrecognized emulation name `%s'"
+#: as.c:319
+msgid ""
+" --listing-cont-lines set the maximum number of continuation lines used\n"
+" for the output data column of the listing\n"
+msgstr ""
+
+#: as.c:325 gasp.c:3589
+msgid ""
+"\n"
+"Report bugs to bug-gnu-utils@gnu.org\n"
msgstr ""
#. This output is intended to follow the GNU standards document.
-#: as.c:462
+#: as.c:515
#, c-format
msgid "GNU assembler %s\n"
msgstr ""
-#: as.c:463
+#: as.c:516
msgid "Copyright 1997 Free Software Foundation, Inc.\n"
msgstr ""
-#: as.c:464 gasp.c:3682
+#: as.c:517 gasp.c:3683
msgid ""
"This program is free software; you may redistribute it under the terms of\n"
"the GNU General Public License. This program has absolutely no warranty.\n"
msgstr ""
-#: as.c:467
+#: as.c:520
#, c-format
msgid "This assembler was configured for a target of `%s'.\n"
msgstr ""
-#: as.c:474
+#: as.c:527
msgid "multiple emulation names specified"
msgstr ""
-#: as.c:476
+#: as.c:529
msgid "emulations not handled in this configuration"
msgstr ""
-#: as.c:481
+#: as.c:534
#, c-format
msgid "alias = %s\n"
msgstr ""
-#: as.c:482
+#: as.c:535
#, c-format
msgid "canonical = %s\n"
msgstr ""
-#: as.c:483
+#: as.c:536
#, c-format
msgid "cpu-type = %s\n"
msgstr ""
-#: as.c:485
+#: as.c:538
#, c-format
msgid "format = %s\n"
msgstr ""
-#: as.c:488
+#: as.c:541
#, c-format
msgid "bfd-target = %s\n"
msgstr ""
-#: as.c:501
+#: as.c:554
msgid "bad defsym; format is --defsym name=value"
msgstr ""
-#: as.c:521
+#: as.c:574
msgid "No file name following -t option\n"
msgstr ""
-#: as.c:537
+#: as.c:590
#, c-format
msgid "Failed to read instruction table %s\n"
msgstr ""
-#: as.c:641
+#: as.c:704
#, c-format
msgid "invalid listing option `%c'"
msgstr ""
-#: as.c:863
+#: as.c:898
+#, c-format
+msgid "%d warnings, treating warnings as errors"
+msgstr ""
+
+#: as.c:929
#, c-format
msgid "%s: total time in assembly: %ld.%06ld\n"
msgstr ""
-#: as.c:866
+#: as.c:932
#, c-format
msgid "%s: data size %ld\n"
msgstr ""
#.
#: atof-generic.c:438 config/tc-a29k.c:544 config/tc-i860.c:335
#: config/tc-i860.c:708 config/tc-m68k.c:3124 config/tc-m68k.c:3153
-#: config/tc-sparc.c:2157
+#: config/tc-sparc.c:2452
msgid "failed sanity check."
msgstr ""
msgid "bad format for ifc or ifnc"
msgstr ""
-#: cond.c:257
-msgid "\".endif\" without \".if\""
-msgstr ""
-
-#: cond.c:287
-msgid ".else without matching .if - ignored"
+#: cond.c:258
+msgid "\".elseif\" without matching \".if\" - ignored"
msgstr ""
-#: cond.c:292
-msgid "duplicate \"else\" - ignored"
+#: cond.c:263
+msgid "\".elseif\" after \".else\" - ignored"
msgstr ""
-#: cond.c:295
+#: cond.c:266 cond.c:375
msgid "here is the previous \"else\""
msgstr ""
-#: cond.c:298
+#: cond.c:269 cond.c:378
msgid "here is the previous \"if\""
msgstr ""
-#: cond.c:343
+#: cond.c:302
+msgid "non-constant expression in \".elseif\" statement"
+msgstr ""
+
+#: cond.c:337
+msgid "\".endif\" without \".if\""
+msgstr ""
+
+#: cond.c:367
+msgid ".else without matching .if - ignored"
+msgstr ""
+
+#: cond.c:372
+msgid "duplicate \"else\" - ignored"
+msgstr ""
+
+#: cond.c:423
msgid ".ifeqs syntax error"
msgstr ""
-#: cond.c:430
+#: cond.c:506
msgid "end of macro inside conditional"
msgstr ""
-#: cond.c:432
+#: cond.c:508
msgid "end of file inside conditional"
msgstr ""
-#: cond.c:435
+#: cond.c:511
msgid "here is the start of the unterminated conditional"
msgstr ""
-#: cond.c:439
+#: cond.c:515
msgid "here is the \"else\" of the unterminated conditional"
msgstr ""
-#: config/obj-aout.c:161
+#: config/obj-aout.c:163
#, c-format
msgid "Attempt to put a common symbol into set %s"
msgstr ""
-#: config/obj-aout.c:165
+#: config/obj-aout.c:167
#, c-format
msgid "Attempt to put an undefined symbol into set %s"
msgstr ""
-#: config/obj-aout.c:196 config/obj-elf.c:1540 ecoff.c:3667
+#: config/obj-aout.c:198 config/obj-coff.c:1204 config/obj-elf.c:1675
+#: ecoff.c:3668
#, c-format
msgid "Symbol `%s' can not be both weak and common"
msgstr ""
-#: config/obj-aout.c:254 config/obj-coff.c:1770
+#: config/obj-aout.c:256 config/obj-coff.c:1916
msgid "unresolved relocation"
msgstr ""
-#: config/obj-aout.c:256 config/obj-coff.c:1772
+#: config/obj-aout.c:258 config/obj-coff.c:1918
#, c-format
msgid "bad relocation: symbol `%s' not in symbol table"
msgstr ""
-#: config/obj-aout.c:343
+#: config/obj-aout.c:345
#, c-format
msgid "%s: bad type for weak symbol"
msgstr ""
-#: config/obj-aout.c:457 config/obj-coff.c:2704 write.c:1801
+#: config/obj-aout.c:462 config/obj-coff.c:2849 write.c:1805
#, c-format
msgid "%s: global symbols not supported in common sections"
msgstr ""
-#: config/obj-aout.c:524
+#: config/obj-aout.c:529
#, c-format
msgid "Local symbol %s never defined."
msgstr ""
-#: config/obj-aout.c:612
+#: config/obj-aout.c:617
msgid "subsegment index too high"
msgstr ""
-#: config/obj-bout.c:312 config/obj-vms.c:566
+#: config/obj-bout.c:313 config/obj-vms.c:566
#, c-format
msgid "Local symbol %s never defined"
msgstr ""
-#: config/obj-coff.c:133
+#: config/obj-coff.c:149
#, c-format
msgid "Inserting \"%s\" into structure table failed: %s"
msgstr ""
-#: config/obj-coff.c:453 config/obj-coff.c:2117
+#. Zero is used as an end marker in the file.
+#: config/obj-coff.c:444
+msgid "Line numbers must be positive integers\n"
+msgstr ""
+
+#: config/obj-coff.c:477 config/obj-coff.c:2263
msgid ".ln pseudo-op inside .def/.endef: ignored."
msgstr ""
-#: config/obj-coff.c:513 config/obj-coff.c:2174
+#: config/obj-coff.c:520 ecoff.c:3304
+msgid ".loc outside of .text"
+msgstr ""
+
+#: config/obj-coff.c:527
+msgid ".loc pseudo-op inside .def/.endef: ignored."
+msgstr ""
+
+#: config/obj-coff.c:615 config/obj-coff.c:2320
msgid ".def pseudo-op used inside of .def/.endef: ignored."
msgstr ""
-#: config/obj-coff.c:559 config/obj-coff.c:2227
+#: config/obj-coff.c:661 config/obj-coff.c:2373
msgid ".endef pseudo-op used outside of .def/.endef: ignored."
msgstr ""
-#: config/obj-coff.c:593
+#: config/obj-coff.c:699
#, c-format
msgid "`%s' symbol without preceding function"
msgstr ""
-#: config/obj-coff.c:635 config/obj-coff.c:2302
+#: config/obj-coff.c:753 config/obj-coff.c:2448
#, c-format
msgid "unexpected storage class %d"
msgstr ""
-#: config/obj-coff.c:737 config/obj-coff.c:2409
+#: config/obj-coff.c:866 config/obj-coff.c:2555
msgid ".dim pseudo-op used outside of .def/.endef: ignored."
msgstr ""
-#: config/obj-coff.c:757 config/obj-coff.c:2429
+#: config/obj-coff.c:886 config/obj-coff.c:2575
msgid "badly formed .dim directive ignored"
msgstr ""
-#: config/obj-coff.c:808 config/obj-coff.c:2492
+#: config/obj-coff.c:937 config/obj-coff.c:2638
msgid ".size pseudo-op used outside of .def/.endef ignored."
msgstr ""
-#: config/obj-coff.c:824 config/obj-coff.c:2508
+#: config/obj-coff.c:953 config/obj-coff.c:2654
msgid ".scl pseudo-op used outside of .def/.endef ignored."
msgstr ""
-#: config/obj-coff.c:842 config/obj-coff.c:2526
+#: config/obj-coff.c:971 config/obj-coff.c:2672
msgid ".tag pseudo-op used outside of .def/.endef ignored."
msgstr ""
-#: config/obj-coff.c:861 config/obj-coff.c:2544
+#: config/obj-coff.c:990 config/obj-coff.c:2690
#, c-format
msgid "tag not found for .tag %s"
msgstr ""
-#: config/obj-coff.c:876 config/obj-coff.c:2559
+#: config/obj-coff.c:1005 config/obj-coff.c:2705
msgid ".type pseudo-op used outside of .def/.endef ignored."
msgstr ""
-#: config/obj-coff.c:898 config/obj-coff.c:2581
+#: config/obj-coff.c:1027 config/obj-coff.c:2727
msgid ".val pseudo-op used outside of .def/.endef ignored."
msgstr ""
-#: config/obj-coff.c:1029 config/obj-coff.c:2777
+#: config/obj-coff.c:1165 config/obj-coff.c:2922
msgid "mismatched .eb"
msgstr ""
-#: config/obj-coff.c:1048 config/obj-coff.c:2817
+#: config/obj-coff.c:1183 config/obj-coff.c:2962
msgid "C_EFCN symbol out of scope"
msgstr ""
#. STYP_INFO
#. STYP_LIB
#. STYP_OVER
-#: config/obj-coff.c:1257
+#: config/obj-coff.c:1405
#, c-format
msgid "unsupported section attribute '%c'"
msgstr ""
-#: config/obj-coff.c:1262 config/obj-coff.c:3520 config/tc-ppc.c:3784
+#: config/obj-coff.c:1410 config/obj-coff.c:3668 config/tc-ppc.c:3791
#, c-format
msgid "unknown section attribute '%c'"
msgstr ""
-#: config/obj-coff.c:1284 config/tc-ppc.c:3802 read.c:2499
+#: config/obj-coff.c:1432 config/tc-ppc.c:3809 read.c:2495
#, c-format
msgid "error setting flags for \"%s\": %s"
msgstr ""
-#: config/obj-coff.c:1403
+#: config/obj-coff.c:1558
#, c-format
msgid "0x%lx: \"%s\" type = %ld, class = %d, segment = %d\n"
msgstr ""
-#: config/obj-coff.c:1597 config/obj-ieee.c:69
+#: config/obj-coff.c:1743 config/obj-ieee.c:69
msgid "Out of step\n"
msgstr ""
-#: config/obj-coff.c:2032
+#: config/obj-coff.c:2178
msgid "bfd_coff_swap_scnhdr_out failed"
msgstr ""
-#: config/obj-coff.c:2259
+#: config/obj-coff.c:2405
msgid "`.bf' symbol without preceding function\n"
msgstr ""
-#: config/obj-coff.c:3220 config/obj-ieee.c:522 output-file.c:52
+#: config/obj-coff.c:3365 config/obj-ieee.c:522 output-file.c:52
#: output-file.c:119
#, c-format
msgid "FATAL: Can't create %s"
msgstr ""
-#: config/obj-coff.c:3394
+#: config/obj-coff.c:3542
#, c-format
msgid "Can't close %s: %s"
msgstr ""
-#: config/obj-coff.c:3428
+#: config/obj-coff.c:3576
#, c-format
msgid "Too many new sections; can't add \"%s\""
msgstr ""
-#: config/obj-coff.c:3838 config/tc-m88k.c:1260 config/tc-sparc.c:3016
+#: config/obj-coff.c:3986 config/tc-m88k.c:1260 config/tc-sparc.c:3344
msgid "Expected comma after name"
msgstr ""
-#: config/obj-coff.c:3844 read.c:1955
+#: config/obj-coff.c:3992 read.c:1948
msgid "Missing size expression"
msgstr ""
-#: config/obj-coff.c:3850
+#: config/obj-coff.c:3998
#, c-format
msgid "lcomm length (%d.) <0! Ignored."
msgstr ""
-#: config/obj-coff.c:3878 read.c:2181
+#: config/obj-coff.c:4026 read.c:2179
#, c-format
msgid "Symbol %s already defined"
msgstr ""
-#: config/obj-coff.c:3972 config/tc-i960.c:3274
+#: config/obj-coff.c:4120 config/tc-i960.c:3255
#, c-format
msgid "No 'bal' entry point for leafproc %s"
msgstr ""
-#: config/obj-coff.c:4051 write.c:2495
+#: config/obj-coff.c:4199 write.c:2507
#, c-format
msgid "Negative of non-absolute symbol %s"
msgstr ""
-#: config/obj-coff.c:4072 write.c:2509
+#: config/obj-coff.c:4220 write.c:2521
msgid "callj to difference of 2 symbols"
msgstr ""
-#: config/obj-coff.c:4118
+#: config/obj-coff.c:4266
#, c-format
msgid "Can't emit reloc {- %s-seg symbol \"%s\"} @ file address %ld."
msgstr ""
#. This is a COBR instruction. They have only a 13-bit
#. displacement and are only to be used for local branches:
#. flag as error, don't generate relocation.
-#: config/obj-coff.c:4208 config/tc-i960.c:3294 write.c:2653
+#: config/obj-coff.c:4356 config/tc-i960.c:3275 write.c:2665
msgid "can't use COBR format with external label"
msgstr ""
-#: config/obj-coff.c:4288
+#: config/obj-coff.c:4436
#, c-format
msgid "Value of %ld too large for field of %d bytes at 0x%lx"
msgstr ""
-#: config/obj-coff.c:4302 write.c:2762
+#: config/obj-coff.c:4450 write.c:2764
#, c-format
msgid "Signed .word overflow; switch may be too large; %ld at 0x%lx"
msgstr ""
-#: config/obj-ecoff.c:239
+#: config/obj-ecoff.c:240
msgid "Can't set GP value"
msgstr ""
-#: config/obj-ecoff.c:246
+#: config/obj-ecoff.c:247
msgid "Can't set register masks"
msgstr ""
-#: config/obj-elf.c:276 config/tc-sparc.c:3157 config/tc-v850.c:263
+#: config/obj-elf.c:299 config/tc-sparc.c:3485 config/tc-v850.c:263
msgid "Expected comma after symbol-name"
msgstr ""
-#: config/obj-elf.c:283 config/tc-arc.c:778 config/tc-sparc.c:3164
+#: config/obj-elf.c:306 config/tc-arc.c:779 config/tc-sparc.c:3492
#, c-format
msgid ".COMMon length (%d.) <0! Ignored."
msgstr ""
-#: config/obj-elf.c:293 config/tc-alpha.c:3430 config/tc-sparc.c:3174
+#: config/obj-elf.c:316 config/tc-alpha.c:4320 config/tc-sparc.c:3502
#: config/tc-v850.c:285
msgid "Ignoring attempt to re-define symbol"
msgstr ""
-#: config/obj-elf.c:301 config/tc-arc.c:796 config/tc-sparc.c:3182
+#: config/obj-elf.c:324 config/tc-arc.c:797 config/tc-sparc.c:3510
#: config/tc-v850.c:295
#, c-format
msgid "Length of .comm \"%s\" is already %ld. Not changed to %d."
msgstr ""
-#: config/obj-elf.c:324 config/tc-arc.c:815 config/tc-v850.c:322
+#: config/obj-elf.c:347 config/tc-arc.c:816 config/tc-v850.c:322
msgid "Common alignment negative; 0 assumed"
msgstr ""
-#: config/obj-elf.c:343 config/tc-m32r.c:664 config/tc-ppc.c:1395
+#: config/obj-elf.c:366 config/tc-m32r.c:1262 config/tc-ppc.c:1396
#: config/tc-v850.c:385
msgid "Common alignment not a power of 2"
msgstr ""
-#: config/obj-elf.c:406 config/tc-arc.c:875 config/tc-sparc.c:3306
+#: config/obj-elf.c:429 config/tc-arc.c:876 config/tc-sparc.c:3634
#: config/tc-v850.c:563
#, c-format
msgid "bad .common segment %s"
msgstr ""
-#: config/obj-elf.c:591
-msgid "Missing section name"
+#: config/obj-elf.c:658
+#, c-format
+msgid "Setting incorrect section type for %s"
msgstr ""
-#: config/obj-elf.c:656
-msgid "Bad .section directive: want a,w,x in string"
+#: config/obj-elf.c:668
+#, c-format
+msgid "Setting incorrect section attributes for %s"
msgstr ""
-#: config/obj-elf.c:705
-msgid "Unrecognized section type"
+#: config/obj-elf.c:726
+msgid "Unrecognized .section attribute: want a,w,x"
msgstr ""
-#: config/obj-elf.c:719
-msgid "Bad .section directive - character following name is not '#'"
+#: config/obj-elf.c:766
+msgid "Unrecognized section attribute"
msgstr ""
-#: config/obj-elf.c:751
-msgid "Unrecognized section attribute"
+#: config/obj-elf.c:788
+msgid "Unrecognized section type"
msgstr ""
-#: config/obj-elf.c:772
-#, c-format
-msgid "Setting incorrect section type for %s"
+#: config/obj-elf.c:839
+msgid "Missing section name"
msgstr ""
-#: config/obj-elf.c:782
-#, c-format
-msgid "Setting incorrect section attributes for %s"
+#: config/obj-elf.c:905
+msgid "Bad .section directive - character following name is not '#'"
msgstr ""
-#: config/obj-elf.c:907
+#: config/obj-elf.c:1006
msgid ".previous without corresponding .section; ignored"
msgstr ""
-#: config/obj-elf.c:956
+#: config/obj-elf.c:1033
+msgid ".popsection without corresponding .pushsection; ignored"
+msgstr ""
+
+#: config/obj-elf.c:1085
#, c-format
msgid "multiple .symver directives for symbol `%s'"
msgstr ""
-#: config/obj-elf.c:965
+#: config/obj-elf.c:1094
msgid "expected comma after name in .symver"
msgstr ""
-#: config/obj-elf.c:986
+#: config/obj-elf.c:1115
#, c-format
msgid "missing version name in `%s' for symbol `%s'"
msgstr ""
-#: config/obj-elf.c:1193 config/obj-som.c:148 config/obj-som.c:193
+#: config/obj-elf.c:1324 config/obj-som.c:148 config/obj-som.c:193
msgid "Expected quoted string"
msgstr ""
-#: config/obj-elf.c:1214
+#: config/obj-elf.c:1345
#, c-format
msgid "expected comma after name `%s' in .size directive"
msgstr ""
-#: config/obj-elf.c:1223
+#: config/obj-elf.c:1354
msgid "missing expression in .size directive"
msgstr ""
-#: config/obj-elf.c:1290
+#: config/obj-elf.c:1421
#, c-format
msgid "ignoring unrecognized symbol type \"%s\""
msgstr ""
-#: config/obj-elf.c:1464
+#: config/obj-elf.c:1599
msgid ".size expression too complicated to fix up"
msgstr ""
-#: config/obj-elf.c:1495
+#: config/obj-elf.c:1630
#, c-format
msgid ""
"invalid attempt to declare external version name as default in symbol `%s'"
msgstr ""
-#: config/obj-elf.c:1625
+#: config/obj-elf.c:1760
#, c-format
msgid "Failed to set up debugging information: %s"
msgstr ""
-#: config/obj-elf.c:1641
+#: config/obj-elf.c:1780
#, c-format
msgid "Can't start writing .mdebug section: %s"
msgstr ""
-#: config/obj-elf.c:1649
+#: config/obj-elf.c:1788
#, c-format
msgid "Could not write .mdebug section: %s"
msgstr ""
msgid "unhandled stab type %d"
msgstr ""
-#: config/tc-a29k.c:160 config/tc-sparc.c:3358
+#: config/tc-a29k.c:160 config/tc-sparc.c:3686
msgid "Unknown segment type"
msgstr ""
#. Probably a memory allocation problem? Give up now.
-#: config/tc-a29k.c:330 config/tc-hppa.c:1336 config/tc-i860.c:202
-#: config/tc-mips.c:1016 config/tc-mips.c:1058 config/tc-sparc.c:715
+#: config/tc-a29k.c:330 config/tc-hppa.c:1387 config/tc-i860.c:202
+#: config/tc-mips.c:1062 config/tc-mips.c:1104 config/tc-sparc.c:779
msgid "Broken assembler. No assembly attempted."
msgstr ""
-#: config/tc-a29k.c:375 config/tc-arc.c:534 config/tc-d10v.c:481
-#: config/tc-d30v.c:540 config/tc-h8300.c:305 config/tc-h8500.c:297
-#: config/tc-mcore.c:509 config/tc-mn10200.c:936 config/tc-mn10300.c:992
-#: config/tc-ppc.c:1850 config/tc-sh.c:478 config/tc-tic80.c:291
+#: config/tc-a29k.c:375 config/tc-arc.c:535 config/tc-d10v.c:507
+#: config/tc-d30v.c:553 config/tc-h8300.c:305 config/tc-h8500.c:297
+#: config/tc-mcore.c:656 config/tc-mn10200.c:935 config/tc-mn10300.c:1294
+#: config/tc-ppc.c:1852 config/tc-sh.c:628 config/tc-tic80.c:291
#: config/tc-v850.c:2033 config/tc-w65.c:257 config/tc-z8k.c:341
msgid "missing operand"
msgstr ""
-#: config/tc-a29k.c:415 config/tc-hppa.c:1450 config/tc-i860.c:407
-#: config/tc-i860.c:423 config/tc-sparc.c:1191 config/tc-sparc.c:1197
+#: config/tc-a29k.c:415 config/tc-hppa.c:1533 config/tc-i860.c:407
+#: config/tc-i860.c:423 config/tc-sparc.c:1342 config/tc-sparc.c:1348
#, c-format
msgid "Unknown opcode: `%s'"
msgstr ""
msgid "Invalid register in & expression"
msgstr ""
-#: config/tc-alpha.c:722
+#: config/tc-alpha.c:834
#, c-format
msgid "internal error: can't hash opcode `%s': %s"
msgstr ""
-#: config/tc-alpha.c:756
+#: config/tc-alpha.c:868
#, c-format
msgid "internal error: can't hash macro `%s': %s"
msgstr ""
-#: config/tc-alpha.c:832 config/tc-i960.c:2736
+#: config/tc-alpha.c:951 config/tc-i960.c:2738
msgid "syntax error"
msgstr ""
-#: config/tc-alpha.c:905 config/tc-arm.c:4982 config/tc-h8300.c:1413
-#: config/tc-h8500.c:1222 config/tc-hppa.c:2684 config/tc-i860.c:813
-#: config/tc-m68k.c:4125 config/tc-m88k.c:1106 config/tc-ns32k.c:1588
-#: config/tc-sparc.c:2433 config/tc-z8k.c:1355
+#: config/tc-alpha.c:1025 config/tc-arm.c:5169 config/tc-h8300.c:1413
+#: config/tc-h8500.c:1222 config/tc-hppa.c:3904 config/tc-i860.c:813
+#: config/tc-m68k.c:4125 config/tc-m88k.c:1106 config/tc-ns32k.c:1589
+#: config/tc-sparc.c:2731 config/tc-z8k.c:1355
msgid "Bad call to MD_ATOF()"
msgstr ""
-#: config/tc-alpha.c:955
+#: config/tc-alpha.c:1075
#, c-format
msgid "Unknown CPU identifier `%s'"
msgstr ""
-#: config/tc-alpha.c:999
+#: config/tc-alpha.c:1119
msgid ""
"Alpha options:\n"
"-32addr\t\t\ttreat addresses as 32-bit values\n"
"\t\t\tthese variants include PALcode opcodes\n"
msgstr ""
-#: config/tc-alpha.c:1009
+#: config/tc-alpha.c:1129
msgid ""
"VMS options:\n"
"-+\t\t\thash encode (don't truncate) names longer than 64 characters\n"
"-H\t\t\tshow new symbol after hash truncation\n"
msgstr ""
-#: config/tc-alpha.c:1165
+#: config/tc-alpha.c:1298
#, c-format
msgid "unhandled relocation type %s"
msgstr ""
-#: config/tc-alpha.c:1178
+#: config/tc-alpha.c:1311
msgid "non-absolute expression in constant field"
msgstr ""
-#: config/tc-alpha.c:1192
+#: config/tc-alpha.c:1325
#, c-format
msgid "type %d reloc done?\n"
msgstr ""
-#: config/tc-alpha.c:1243 config/tc-alpha.c:1250 config/tc-mips.c:7329
+#: config/tc-alpha.c:1376 config/tc-alpha.c:1383 config/tc-mips.c:7362
msgid "Used $at without \".set noat\""
msgstr ""
-#: config/tc-alpha.c:1408
+#: config/tc-alpha.c:1561
#, c-format
msgid "cannot represent `%s' relocation in object file"
msgstr ""
-#: config/tc-alpha.c:1415
+#: config/tc-alpha.c:1568
#, c-format
msgid "internal error? cannot generate `%s' relocation"
msgstr ""
-#: config/tc-alpha.c:1469
+#: config/tc-alpha.c:1622
#, c-format
msgid "frame reg expected, using $%d."
msgstr ""
-#: config/tc-alpha.c:1794
+#: config/tc-alpha.c:1747
+#, c-format
+msgid "No !literal!%d was found"
+msgstr ""
+
+#. only support one relocation op per insn
+#: config/tc-alpha.c:1935
+msgid "More than one relocation op per insn"
+msgstr ""
+
+#: config/tc-alpha.c:1952
+msgid "No relocation operand"
+msgstr ""
+
+#: config/tc-alpha.c:1958
+#, c-format
+msgid "No !sequence-number after !%s"
+msgstr ""
+
+#: config/tc-alpha.c:1971
+#, c-format
+msgid "Unknown relocation operand: !%s"
+msgstr ""
+
+#: config/tc-alpha.c:1984
+#, c-format
+msgid "Bad sequence number: !%s!%s"
+msgstr ""
+
+#: config/tc-alpha.c:2335
#, c-format
msgid "operand out of range (%s not between %d and %d)"
msgstr ""
-#: config/tc-alpha.c:1891 config/tc-arc.c:547 config/tc-d10v.c:570
-#: config/tc-d30v.c:623 config/tc-mn10200.c:991 config/tc-mn10300.c:1058
-#: config/tc-ppc.c:1816 config/tc-ppc.c:1923 config/tc-ppc.c:1935
+#: config/tc-alpha.c:2434 config/tc-arc.c:548 config/tc-d10v.c:596
+#: config/tc-d30v.c:636 config/tc-mn10200.c:990 config/tc-mn10300.c:1365
+#: config/tc-ppc.c:1818 config/tc-ppc.c:1926 config/tc-ppc.c:1938
#: config/tc-v850.c:1819 config/tc-v850.c:1842 config/tc-v850.c:2055
msgid "too many fixups"
msgstr ""
-#: config/tc-alpha.c:2016 config/tc-alpha.c:2074
+#: config/tc-alpha.c:2645 config/tc-alpha.c:2714
#, c-format
msgid "inappropriate arguments for opcode `%s'"
msgstr ""
-#: config/tc-alpha.c:2018 config/tc-alpha.c:2076
+#: config/tc-alpha.c:2647 config/tc-alpha.c:2716
#, c-format
msgid "opcode `%s' not supported for target %s"
msgstr ""
-#: config/tc-alpha.c:2022 config/tc-alpha.c:2079
+#: config/tc-alpha.c:2651 config/tc-alpha.c:2719
#, c-format
msgid "unknown opcode `%s'"
msgstr ""
-#: config/tc-alpha.c:2131
+#: config/tc-alpha.c:2691 config/tc-alpha.c:2758 config/tc-alpha.c:3269
+#: config/tc-alpha.c:3329 config/tc-alpha.c:3381 config/tc-alpha.c:3456
+#: config/tc-alpha.c:3541 config/tc-alpha.c:3667 config/tc-alpha.c:3844
+#: config/tc-alpha.c:3901 config/tc-alpha.c:4011 config/tc-alpha.c:4118
+#: config/tc-alpha.c:4195
+#, c-format
+msgid "Cannot use !%s!%d with %s"
+msgstr ""
+
+#: config/tc-alpha.c:2779
msgid "can not resolve expression"
msgstr ""
-#: config/tc-alpha.c:2269 config/tc-alpha.c:2446
+#: config/tc-alpha.c:2921 config/tc-alpha.c:3113
msgid "overflow in literal (.lita) table"
msgstr ""
-#: config/tc-alpha.c:2276 config/tc-alpha.c:2298 config/tc-alpha.c:2459
-#: config/tc-alpha.c:2681 config/tc-alpha.c:2728 config/tc-alpha.c:2776
-#: config/tc-alpha.c:2865 config/tc-alpha.c:3066 config/tc-alpha.c:3167
+#: config/tc-alpha.c:2928 config/tc-alpha.c:2951 config/tc-alpha.c:3126
+#: config/tc-alpha.c:3470 config/tc-alpha.c:3548 config/tc-alpha.c:3596
+#: config/tc-alpha.c:3696 config/tc-alpha.c:3921 config/tc-alpha.c:4033
msgid "macro requires $at register while noat in effect"
msgstr ""
-#: config/tc-alpha.c:2278 config/tc-alpha.c:2300 config/tc-alpha.c:2461
+#: config/tc-alpha.c:2930 config/tc-alpha.c:2953 config/tc-alpha.c:3128
msgid "macro requires $at while $at in use"
msgstr ""
-#: config/tc-alpha.c:2408 expr.c:86 read.c:3125
+#: config/tc-alpha.c:3075 expr.c:86 read.c:3151
msgid "bignum invalid; zero assumed"
msgstr ""
-#: config/tc-alpha.c:2410 expr.c:88 read.c:3127 read.c:3457 read.c:4353
+#: config/tc-alpha.c:3077 expr.c:88 read.c:3153 read.c:3489 read.c:4387
msgid "floating point number invalid; zero assumed"
msgstr ""
-#: config/tc-alpha.c:2415
+#: config/tc-alpha.c:3082
msgid "can't handle expression"
msgstr ""
-#: config/tc-alpha.c:2452
+#: config/tc-alpha.c:3119
msgid "overflow in literal (.lit8) table"
msgstr ""
-#: config/tc-alpha.c:3401 config/tc-ppc.c:1344 config/tc-ppc.c:3548
-#: read.c:1377
+#: config/tc-alpha.c:3291
+#, c-format
+msgid "bad instruction format for lda !%s!%d"
+msgstr ""
+
+#: config/tc-alpha.c:4291 config/tc-ppc.c:1345 config/tc-ppc.c:3555
+#: read.c:1368
#, c-format
msgid ".COMMon length (%ld.) <0! Ignored."
msgstr ""
-#: config/tc-alpha.c:3439 config/tc-alpha.c:3448 config/tc-ppc.c:3585
-#: read.c:1398
+#: config/tc-alpha.c:4329 config/tc-alpha.c:4338 config/tc-ppc.c:3592
+#: read.c:1389
#, c-format
msgid "Length of .comm \"%s\" is already %ld. Not changed to %ld."
msgstr ""
-#: config/tc-alpha.c:3550 ecoff.c:3108
+#: config/tc-alpha.c:4440 ecoff.c:3109
msgid ".ent directive has no name"
msgstr ""
-#: config/tc-alpha.c:3558
+#: config/tc-alpha.c:4448
msgid "nested .ent directives"
msgstr ""
-#: config/tc-alpha.c:3594 ecoff.c:3056
+#: config/tc-alpha.c:4484 ecoff.c:3057
msgid ".end directive has no name"
msgstr ""
-#: config/tc-alpha.c:3603
+#: config/tc-alpha.c:4493
msgid ".end directive names different symbol than .ent"
msgstr ""
-#: config/tc-alpha.c:3678
+#: config/tc-alpha.c:4568
#, c-format
msgid "Invalid argument %d to .prologue."
msgstr ""
-#: config/tc-alpha.c:3706
+#: config/tc-alpha.c:4596
msgid "ECOFF debugging is disabled."
msgstr ""
-#: config/tc-alpha.c:3727
+#: config/tc-alpha.c:4617
msgid "Unknown section directive"
msgstr ""
-#: config/tc-alpha.c:3764
+#: config/tc-alpha.c:4654
msgid ".ent directive has no symbol"
msgstr ""
-#: config/tc-alpha.c:3792
+#: config/tc-alpha.c:4682
msgid "Bad .frame directive 1./2. param"
msgstr ""
-#: config/tc-alpha.c:3804
+#: config/tc-alpha.c:4694
msgid "Bad .frame directive 3./4. param"
msgstr ""
-#: config/tc-alpha.c:3829
+#: config/tc-alpha.c:4719
msgid ".pdesc directive not in link (.link) section"
msgstr ""
-#: config/tc-alpha.c:3837
+#: config/tc-alpha.c:4727
msgid ".pdesc has no matching .ent"
msgstr ""
-#: config/tc-alpha.c:3847
+#: config/tc-alpha.c:4738
msgid ".pdesc directive has no entry symbol"
msgstr ""
-#: config/tc-alpha.c:3859
+#: config/tc-alpha.c:4751
msgid "No comma after .pdesc <entryname>"
msgstr ""
-#: config/tc-alpha.c:3882
+#: config/tc-alpha.c:4774
msgid "unknown procedure kind"
msgstr ""
-#: config/tc-alpha.c:3977
+#: config/tc-alpha.c:4869
msgid ".name directive not in link (.link) section"
msgstr ""
-#: config/tc-alpha.c:3985
+#: config/tc-alpha.c:4877
msgid ".name directive has no symbol"
msgstr ""
-#: config/tc-alpha.c:4020
+#: config/tc-alpha.c:4912
msgid "No symbol after .linkage"
msgstr ""
-#: config/tc-alpha.c:4049
+#: config/tc-alpha.c:4941
msgid "No symbol after .code_address"
msgstr ""
-#: config/tc-alpha.c:4084 ecoff.c:3273
+#: config/tc-alpha.c:4976 ecoff.c:3274
msgid "Bad .mask directive"
msgstr ""
-#: config/tc-alpha.c:4106 ecoff.c:3204
+#: config/tc-alpha.c:4998 ecoff.c:3205
msgid "Bad .fmask directive"
msgstr ""
-#: config/tc-alpha.c:4277 read.c:2144 read.c:2696 stabs.c:460
+#: config/tc-alpha.c:5169 config/tc-arm.c:1328 read.c:2142 read.c:2722
+#: stabs.c:460
#, c-format
msgid "Expected comma after name \"%s\""
msgstr ""
-#. symbolP->sy_other = (signed char) temp;
-#: config/tc-alpha.c:4288
+#. *symbol_get_obj (symbolP) = (signed char) temp;
+#: config/tc-alpha.c:5180
#, c-format
msgid "unhandled: .proc %s,%d"
msgstr ""
-#: config/tc-alpha.c:4323
+#: config/tc-alpha.c:5215
#, c-format
msgid "Tried to .set unrecognized mode `%s'"
msgstr ""
#. not fatal, but it might not work in the end
-#: config/tc-alpha.c:4340
+#: config/tc-alpha.c:5232
msgid "File overrides no-base-register option."
msgstr ""
-#: config/tc-alpha.c:4357
+#: config/tc-alpha.c:5249
#, c-format
msgid "Bad base register, using $%d."
msgstr ""
-#: config/tc-alpha.c:4379
+#: config/tc-alpha.c:5271
#, c-format
msgid "Alignment too large: %d. assumed"
msgstr ""
-#: config/tc-alpha.c:4383 config/tc-d30v.c:2163
+#: config/tc-alpha.c:5275 config/tc-d30v.c:2182
msgid "Alignment negative: 0 assumed"
msgstr ""
-#: config/tc-alpha.c:4696
+#: config/tc-alpha.c:5588
#, c-format
msgid "Chose GP value of %lx\n"
msgstr ""
-#: config/tc-arc.c:136
+#: config/tc-arc.c:137
msgid ""
"ARC options:\n"
"-EB\t\t\tgenerate big endian output\n"
"-EL\t\t\tgenerate little endian output\n"
msgstr ""
-#: config/tc-arc.c:154 config/tc-arc.c:177 config/tc-arc.c:921
-#: config/tc-hppa.c:1298 config/tc-hppa.c:5054 config/tc-hppa.c:5060
-#: config/tc-hppa.c:5066 config/tc-mn10300.c:721 config/tc-mn10300.c:1646
+#: config/tc-arc.c:155 config/tc-arc.c:178 config/tc-arc.c:922
+#: config/tc-hppa.c:1347 config/tc-hppa.c:6734 config/tc-hppa.c:6740
+#: config/tc-hppa.c:6746 config/tc-hppa.c:6752 config/tc-mn10300.c:883
+#: config/tc-mn10300.c:1993
msgid "could not set architecture and machine"
msgstr ""
-#: config/tc-arc.c:174
+#: config/tc-arc.c:175
msgid "virtual memory exhausted"
msgstr ""
-#: config/tc-arc.c:253 config/tc-mn10200.c:1354 config/tc-mn10300.c:1565
-#: config/tc-ppc.c:1101 config/tc-v850.c:1618
+#: config/tc-arc.c:254 config/tc-mn10200.c:1354 config/tc-mn10300.c:1904
+#: config/tc-ppc.c:1102 config/tc-v850.c:1618
#, c-format
msgid "operand out of range (%s not between %ld and %ld)"
msgstr ""
-#: config/tc-arc.c:388
+#: config/tc-arc.c:389
#, c-format
msgid "unknown syntax format character `%c'"
msgstr ""
-#: config/tc-arc.c:487
+#: config/tc-arc.c:488
msgid "too many suffixes"
msgstr ""
-#: config/tc-arc.c:532 config/tc-d10v.c:479 config/tc-d30v.c:538
-#: config/tc-mn10200.c:933 config/tc-mn10300.c:989 config/tc-ppc.c:1848
+#: config/tc-arc.c:533 config/tc-d10v.c:505 config/tc-d30v.c:551
+#: config/tc-mn10200.c:932 config/tc-mn10300.c:1291 config/tc-ppc.c:1850
#: config/tc-tic80.c:287 config/tc-v850.c:2030
msgid "illegal operand"
msgstr ""
-#: config/tc-arc.c:619 config/tc-mn10200.c:1032 config/tc-mn10300.c:1128
-#: config/tc-ppc.c:1972 config/tc-v850.c:2108
+#: config/tc-arc.c:620 config/tc-mn10200.c:1031 config/tc-mn10300.c:1435
+#: config/tc-ppc.c:1975 config/tc-v850.c:2108
#, c-format
msgid "junk at end of line: `%s'"
msgstr ""
-#: config/tc-arc.c:659
+#: config/tc-arc.c:660
msgid "8 byte instruction in delay slot"
msgstr ""
-#: config/tc-arc.c:661
+#: config/tc-arc.c:662
msgid "8 byte jump instruction with delay slot"
msgstr ""
-#: config/tc-arc.c:669
+#: config/tc-arc.c:670
msgid "conditional branch follows set of flags"
msgstr ""
-#: config/tc-arc.c:748 config/tc-arm.c:6039
+#: config/tc-arc.c:749 config/tc-arm.c:6329
#, c-format
msgid "bad instruction `%s'"
msgstr ""
-#: config/tc-arc.c:771
+#: config/tc-arc.c:772
msgid "expected comma after symbol-name"
msgstr ""
-#: config/tc-arc.c:788
+#: config/tc-arc.c:789
msgid "ignoring attempt to re-define symbol"
msgstr ""
-#: config/tc-arc.c:803
+#: config/tc-arc.c:804
msgid "expected comma after common length"
msgstr ""
-#: config/tc-arc.c:896
+#: config/tc-arc.c:897
msgid ".cpu command must appear before any instructions"
msgstr ""
-#: config/tc-arc.c:915
+#: config/tc-arc.c:916
msgid ".cpu conflicts with previous value"
msgstr ""
-#: config/tc-arc.c:926
+#: config/tc-arc.c:927
msgid "bad .cpu op"
msgstr ""
-#: config/tc-arc.c:950 config/tc-ppc.c:2621
+#: config/tc-arc.c:951 config/tc-ppc.c:2623
msgid "missing rename string"
msgstr ""
-#: config/tc-arc.c:962
+#: config/tc-arc.c:963
msgid "invalid symbol to rename to"
msgstr ""
-#: config/tc-arc.c:1009 config/tc-d10v.c:274 config/tc-d30v.c:353
-#: config/tc-mips.c:8736 config/tc-mn10200.c:356 config/tc-ppc.c:4369
-#: config/tc-sh.c:1187 config/tc-v850.c:1276
+#: config/tc-arc.c:1010 config/tc-d10v.c:284 config/tc-d30v.c:366
+#: config/tc-mips.c:8769 config/tc-mn10200.c:355 config/tc-pj.c:365
+#: config/tc-ppc.c:4384 config/tc-sh.c:1736 config/tc-v850.c:1276
msgid "bad call to md_atof"
msgstr ""
-#: config/tc-arc.c:1096
+#: config/tc-arc.c:1097
#, c-format
msgid "missing ')' in %-op"
msgstr ""
-#: config/tc-arc.c:1130
+#: config/tc-arc.c:1131
msgid "expression too complex for %%st"
msgstr ""
-#: config/tc-arc.c:1324 config/tc-arm.c:2937 config/tc-d10v.c:1448
-#: config/tc-d30v.c:1810 config/tc-mips.c:3196 config/tc-mips.c:4128
-#: config/tc-mips.c:4913 config/tc-mips.c:5459 config/tc-ppc.c:4704
-#: config/tc-v850.c:2339
+#: config/tc-arc.c:1326 config/tc-arm.c:3146 config/tc-d10v.c:1475
+#: config/tc-d30v.c:1828 config/tc-mips.c:3252 config/tc-mips.c:4184
+#: config/tc-mips.c:4969 config/tc-mips.c:5515 config/tc-ppc.c:4720
+#: config/tc-v850.c:2338
msgid "expression too complex"
msgstr ""
-#: config/tc-arc.c:1390 config/tc-ppc.c:4807 config/tc-v850.c:2383
+#: config/tc-arc.c:1392 config/tc-ppc.c:4823 config/tc-v850.c:2382
msgid "unresolved expression that must be resolved"
msgstr ""
-#: config/tc-arc.c:1454 config/tc-sparc.c:2881
+#: config/tc-arc.c:1457 config/tc-sparc.c:3193
#, c-format
msgid "internal error: can't export reloc type %d (`%s')"
msgstr ""
-#: config/tc-arm.c:983
+#: config/tc-arm.c:1025
msgid "Literal Pool Overflow"
msgstr ""
-#: config/tc-arm.c:1103
+#: config/tc-arm.c:1168
msgid "Invalid syntax for .req directive."
msgstr ""
-#: config/tc-arm.c:1139
-msgid "Nothing to put in the pool\n"
-msgstr ""
-
-#: config/tc-arm.c:1151
-msgid "Inserting implicit pool at change of section"
-msgstr ""
-
-#: config/tc-arm.c:1183 config/tc-mips.c:9851 read.c:2038
+#: config/tc-arm.c:1240 config/tc-mips.c:9924 read.c:2031
#, c-format
msgid "Alignment too large: %d. assumed."
msgstr ""
-#: config/tc-arm.c:1186 read.c:2043
+#: config/tc-arm.c:1243 read.c:2036
msgid "Alignment negative. 0 assumed."
msgstr ""
-#: config/tc-arm.c:1251
+#: config/tc-arm.c:1377 config/tc-m32r.c:411 read.c:2781 read.c:4858
+#, c-format
+msgid "symbol `%s' already defined"
+msgstr ""
+
+#: config/tc-arm.c:1447
msgid "selected processor does not support THUMB opcodes"
msgstr ""
-#: config/tc-arm.c:1263
+#: config/tc-arm.c:1459
msgid "selected processor does not support ARM opcodes"
msgstr ""
-#: config/tc-arm.c:1272
+#: config/tc-arm.c:1468
#, c-format
msgid "invalid instruction size selected (%d)"
msgstr ""
-#: config/tc-arm.c:1307
+#: config/tc-arm.c:1503
#, c-format
msgid "invalid operand to .code directive (%d) (expecting 16 or 32)"
msgstr ""
-#: config/tc-arm.c:1319
+#: config/tc-arm.c:1514
msgid "Garbage following instruction"
msgstr ""
#. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1367
+#. this error can be overridden.
+#: config/tc-arm.c:1564
#, c-format
msgid "Register expected, not '%.100s'"
msgstr ""
#. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1393
+#. this error can be overridden.
+#: config/tc-arm.c:1590
msgid "<psr(f)> expected"
msgstr ""
-#: config/tc-arm.c:1424
+#: config/tc-arm.c:1620
msgid "Illegal co-processor number"
msgstr ""
-#: config/tc-arm.c:1431
+#: config/tc-arm.c:1627
msgid "Bad or missing co-processor number"
msgstr ""
-#: config/tc-arm.c:1456
+#: config/tc-arm.c:1651
msgid "bad or missing expression"
msgstr ""
-#: config/tc-arm.c:1462
+#: config/tc-arm.c:1657
msgid "immediate co-processor expression too large"
msgstr ""
#. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1487
+#. this error can be overridden.
+#: config/tc-arm.c:1682
msgid "Co-processor register expected"
msgstr ""
#. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1511
+#. this error can be overridden.
+#: config/tc-arm.c:1706
msgid "Floating point register expected"
msgstr ""
-#: config/tc-arm.c:1529
+#: config/tc-arm.c:1723
msgid "immediate expression expected"
msgstr ""
-#: config/tc-arm.c:1544
+#: config/tc-arm.c:1738
msgid "co-processor address must be word aligned"
msgstr ""
-#: config/tc-arm.c:1550
+#: config/tc-arm.c:1744
msgid "offset too large"
msgstr ""
-#: config/tc-arm.c:1600
+#: config/tc-arm.c:1792
msgid "pc may not be used in post-increment"
msgstr ""
-#: config/tc-arm.c:1616 config/tc-arm.c:2727
+#: config/tc-arm.c:1808 config/tc-arm.c:2938
msgid "pre-indexed expression expected"
msgstr ""
-#: config/tc-arm.c:1630 config/tc-arm.c:2740 config/tc-arm.c:3089
+#: config/tc-arm.c:1821 config/tc-arm.c:2950 config/tc-arm.c:3292
msgid "missing ]"
msgstr ""
-#: config/tc-arm.c:1641
+#: config/tc-arm.c:1831
msgid "pc may not be used with write-back"
msgstr ""
-#: config/tc-arm.c:1696
+#: config/tc-arm.c:1885
msgid "<psr> expected"
msgstr ""
-#: config/tc-arm.c:1758 config/tc-arm.c:2378
+#: config/tc-arm.c:1946 config/tc-arm.c:2560
msgid "Register or shift expression expected"
msgstr ""
-#: config/tc-arm.c:1772 config/tc-arm.c:2090 config/tc-arm.c:2345
-#: config/tc-arm.c:2365
+#: config/tc-arm.c:1960 config/tc-arm.c:2275 config/tc-arm.c:2527
+#: config/tc-arm.c:2547
msgid "Invalid constant"
msgstr ""
-#: config/tc-arm.c:1783
+#: config/tc-arm.c:1971
msgid "Error: unrecognised syntax for second argument to msr instruction"
msgstr ""
-#: config/tc-arm.c:1833
+#: config/tc-arm.c:2020
msgid "rdhi, rdlo and rm must all be different"
msgstr ""
-#: config/tc-arm.c:1890
+#: config/tc-arm.c:2076
msgid "rd and rm should be different in mul"
msgstr ""
-#: config/tc-arm.c:1947
+#: config/tc-arm.c:2132
msgid "rd and rm should be different in mla"
msgstr ""
-#: config/tc-arm.c:2074
+#: config/tc-arm.c:2259
msgid "bad_segment"
msgstr ""
-#: config/tc-arm.c:2121 config/tc-arm.c:2199
+#: config/tc-arm.c:2305 config/tc-arm.c:2382
msgid "Shift expression expected"
msgstr ""
-#: config/tc-arm.c:2163
+#: config/tc-arm.c:2346
msgid "Invalid immediate shift"
msgstr ""
-#: config/tc-arm.c:2192
+#: config/tc-arm.c:2375
msgid "shift requires register or #expression"
msgstr ""
-#: config/tc-arm.c:2193
+#: config/tc-arm.c:2376
msgid "shift requires #expression"
msgstr ""
-#: config/tc-arm.c:2336 config/tc-arm.c:2770
+#: config/tc-arm.c:2518 config/tc-arm.c:2979
msgid "Constant expression expected"
msgstr ""
-#: config/tc-arm.c:2432
+#: config/tc-arm.c:2613
msgid "Invalid floating point immediate expression"
msgstr ""
-#: config/tc-arm.c:2435
+#: config/tc-arm.c:2616
msgid "Floating point register or immediate expression expected"
msgstr ""
-#: config/tc-arm.c:2574
+#: config/tc-arm.c:2785
msgid "address offset too large"
msgstr ""
-#: config/tc-arm.c:2645
+#: config/tc-arm.c:2857
msgid "Processor does not support halfwords or signed bytes"
msgstr ""
-#: config/tc-arm.c:2667
+#: config/tc-arm.c:2878
msgid "Address expected"
msgstr ""
-#: config/tc-arm.c:2698 config/tc-arm.c:2712 config/tc-arm.c:2750
-msgid "destination register same as write-back base\n"
+#: config/tc-arm.c:2908 config/tc-arm.c:2922 config/tc-arm.c:2959
+#, c-format
+msgid "%s register same as write-back base"
+msgstr ""
+
+#: config/tc-arm.c:2909 config/tc-arm.c:2923 config/tc-arm.c:2960
+msgid "destination"
+msgstr ""
+
+#: config/tc-arm.c:2909 config/tc-arm.c:2923 config/tc-arm.c:2960
+msgid "source"
msgstr ""
-#: config/tc-arm.c:2790
+#: config/tc-arm.c:2999
msgid "literal pool insertion failed"
msgstr ""
-#: config/tc-arm.c:2826
+#: config/tc-arm.c:3037
msgid "Pre-increment instruction with translate"
msgstr ""
-#: config/tc-arm.c:2868
+#: config/tc-arm.c:3078
msgid "Bad range in register list"
msgstr ""
-#: config/tc-arm.c:2876 config/tc-arm.c:2885 config/tc-arm.c:2927
+#: config/tc-arm.c:3086 config/tc-arm.c:3095 config/tc-arm.c:3136
#, c-format
msgid "Warning: Duplicated register (r%d) in register list"
msgstr ""
-#: config/tc-arm.c:2888
+#: config/tc-arm.c:3098
msgid "Warning: Register range not in ascending order"
msgstr ""
-#: config/tc-arm.c:2900
+#: config/tc-arm.c:3109
msgid "Missing `}'"
msgstr ""
-#: config/tc-arm.c:2916
+#: config/tc-arm.c:3125
msgid "invalid register mask"
msgstr ""
-#: config/tc-arm.c:2977
+#: config/tc-arm.c:3184
msgid "r15 not allowed as base register"
msgstr ""
-#: config/tc-arm.c:3047 config/tc-arm.c:3061
+#: config/tc-arm.c:3252 config/tc-arm.c:3266
msgid "r15 not allowed in swap"
msgstr ""
-#: config/tc-arm.c:3158
-msgid "Use of r15 in bx has undefined behaviour"
-msgstr ""
-
-#: config/tc-arm.c:3417 config/tc-v850.c:1921 config/tc-v850.c:1942
+#: config/tc-arm.c:3619 config/tc-v850.c:1921 config/tc-v850.c:1942
msgid "constant expression expected"
msgstr ""
-#: config/tc-arm.c:3423
+#: config/tc-arm.c:3625
msgid "Constant value required for number of registers"
msgstr ""
-#: config/tc-arm.c:3431
+#: config/tc-arm.c:3633
msgid "number of registers must be in the range [1:4]"
msgstr ""
-#: config/tc-arm.c:3493
+#: config/tc-arm.c:3693
msgid "R15 not allowed as base register with write-back"
msgstr ""
-#: config/tc-arm.c:3745
+#: config/tc-arm.c:3940
msgid "lo register required"
msgstr ""
-#: config/tc-arm.c:3753
+#: config/tc-arm.c:3948
msgid "hi register required"
msgstr ""
-#: config/tc-arm.c:3823
+#: config/tc-arm.c:4017
msgid "dest and source1 must be the same register"
msgstr ""
-#: config/tc-arm.c:3830
+#: config/tc-arm.c:4024
msgid "subtract valid only on lo regs"
msgstr ""
-#: config/tc-arm.c:3854
+#: config/tc-arm.c:4048
msgid "invalid Hi register with immediate"
msgstr ""
-#: config/tc-arm.c:3881 config/tc-arm.c:3914 config/tc-arm.c:3924
+#: config/tc-arm.c:4075 config/tc-arm.c:4108 config/tc-arm.c:4118
msgid "immediate value out of range"
msgstr ""
-#: config/tc-arm.c:3892
+#: config/tc-arm.c:4086
msgid "invalid immediate value for stack adjust"
msgstr ""
-#: config/tc-arm.c:3903
+#: config/tc-arm.c:4097
msgid "invalid immediate for address calculation"
msgstr ""
-#: config/tc-arm.c:3990
+#: config/tc-arm.c:4184
msgid "source1 and dest must be same register"
msgstr ""
-#: config/tc-arm.c:4025
+#: config/tc-arm.c:4219
msgid "Invalid immediate for shift"
msgstr ""
-#: config/tc-arm.c:4104
+#: config/tc-arm.c:4298
msgid "only lo regs allowed with immediate"
msgstr ""
-#: config/tc-arm.c:4123
+#: config/tc-arm.c:4317
msgid "invalid immediate"
msgstr ""
-#: config/tc-arm.c:4178
+#: config/tc-arm.c:4371
msgid "expected ']'"
msgstr ""
-#: config/tc-arm.c:4245
+#: config/tc-arm.c:4437
msgid "byte or halfword not valid for base register"
msgstr ""
-#: config/tc-arm.c:4250
+#: config/tc-arm.c:4442
msgid "R15 based store not allowed"
msgstr ""
-#: config/tc-arm.c:4255
+#: config/tc-arm.c:4447
msgid "Invalid base register for register offset"
msgstr ""
-#: config/tc-arm.c:4273
+#: config/tc-arm.c:4465
msgid "invalid offset"
msgstr ""
-#: config/tc-arm.c:4284
+#: config/tc-arm.c:4476
msgid "invalid base register in load/store"
msgstr ""
-#: config/tc-arm.c:4308 config/tc-arm.c:5469 config/tc-arm.c:5478
-#: config/tc-arm.c:5485 config/tc-arm.c:5492 config/tc-arm.c:5499
+#: config/tc-arm.c:4500
msgid "Invalid offset"
msgstr ""
-#: config/tc-arm.c:4386
+#: config/tc-arm.c:4574
msgid "dest and source1 one must be the same register"
msgstr ""
-#: config/tc-arm.c:4394
+#: config/tc-arm.c:4582
msgid "Rs and Rd must be different in MUL"
msgstr ""
-#: config/tc-arm.c:4539
+#: config/tc-arm.c:4726
msgid ""
"Inserted missing '!': load/store multiple always writes back base register"
msgstr ""
-#: config/tc-arm.c:4555 config/tc-arm.c:4657
+#: config/tc-arm.c:4742 config/tc-arm.c:4842
msgid "Expression too complex"
msgstr ""
-#: config/tc-arm.c:4561
+#: config/tc-arm.c:4748
msgid "only lo-regs valid in load/store multiple"
msgstr ""
-#: config/tc-arm.c:4608
+#: config/tc-arm.c:4794
msgid "Syntax: ldrs[b] Rd, [Rb, Ro]"
msgstr ""
-#: config/tc-arm.c:4673
+#: config/tc-arm.c:4858
msgid "invalid register list to push/pop instruction"
msgstr ""
-#: config/tc-arm.c:4811
+#: config/tc-arm.c:4994
msgid "Virtual memory exhausted"
msgstr ""
-#: config/tc-arm.c:5203
+#: config/tc-arm.c:5396
#, c-format
-msgid "invalid constant (%x) after fixup\n"
+msgid "invalid constant (%lx) after fixup"
msgstr ""
-#: config/tc-arm.c:5215 config/tc-arm.c:5236
+#: config/tc-arm.c:5430
#, c-format
-msgid "bad immediate value for offset (%d)"
+msgid "Unable to compute ADRL instructions for PC offset of 0x%x"
+msgstr ""
+
+#: config/tc-arm.c:5458
+#, c-format
+msgid "bad immediate value for offset (%ld)"
+msgstr ""
+
+#: config/tc-arm.c:5479 config/tc-arm.c:5501
+msgid "invalid literal constant: pool needs to be closer"
msgstr ""
-#: config/tc-arm.c:5234 config/tc-arm.c:5257
-msgid "invalid literal constant: pool needs to be closer\n"
+#: config/tc-arm.c:5481
+#, c-format
+msgid "bad immediate value for half-word offset (%ld)"
msgstr ""
-#: config/tc-arm.c:5274
+#: config/tc-arm.c:5518
msgid "shift expression is too large"
msgstr ""
-#: config/tc-arm.c:5292 config/tc-arm.c:5301
+#: config/tc-arm.c:5536 config/tc-arm.c:5545
msgid "Invalid swi expression"
msgstr ""
-#: config/tc-arm.c:5311
+#: config/tc-arm.c:5555
msgid "Invalid expression in load/store multiple"
msgstr ""
-#: config/tc-arm.c:5339 config/tc-arm.c:5355 config/tc-mips.c:9678
+#: config/tc-arm.c:5584 config/tc-arm.c:5600 config/tc-mips.c:9751
msgid "Branch out of range"
msgstr ""
-#: config/tc-arm.c:5374
+#: config/tc-arm.c:5622
msgid "Branch with link out of range"
msgstr ""
-#: config/tc-arm.c:5441
+#: config/tc-arm.c:5689
msgid "Illegal value for co-processor offset"
msgstr ""
-#: config/tc-arm.c:5464
+#: config/tc-arm.c:5712
#, c-format
msgid "Invalid offset, target not word aligned (0x%08X)"
msgstr ""
-#: config/tc-arm.c:5535
+#: config/tc-arm.c:5717 config/tc-arm.c:5726 config/tc-arm.c:5733
+#: config/tc-arm.c:5740 config/tc-arm.c:5747
+#, c-format
+msgid "Invalid offset, value too big (0x%08X)"
+msgstr ""
+
+#: config/tc-arm.c:5784
msgid "Invalid immediate for stack address calculation"
msgstr ""
-#: config/tc-arm.c:5544
+#: config/tc-arm.c:5793
#, c-format
-msgid "Invalid immediate for address calculation (value = 0x%08X)"
+msgid "Invalid immediate for address calculation (value = 0x%08lX)"
msgstr ""
-#: config/tc-arm.c:5553
+#: config/tc-arm.c:5803
msgid "Invalid 8bit immediate"
msgstr ""
-#: config/tc-arm.c:5561
+#: config/tc-arm.c:5811
msgid "Invalid 3bit immediate"
msgstr ""
-#: config/tc-arm.c:5577
+#: config/tc-arm.c:5827
#, c-format
-msgid "Invalid immediate: %d is too large"
+msgid "Invalid immediate: %ld is too large"
msgstr ""
-#: config/tc-arm.c:5591
+#: config/tc-arm.c:5842
#, c-format
-msgid "Illegal Thumb shift value: %d"
+msgid "Illegal Thumb shift value: %ld"
msgstr ""
-#: config/tc-arm.c:5605
+#: config/tc-arm.c:5856
#, c-format
-msgid "Bad relocation fixup type (%d)\n"
+msgid "Bad relocation fixup type (%d)"
msgstr ""
-#: config/tc-arm.c:5674
-msgid "Literal referenced across section boundry (Implicit dump?)"
+#: config/tc-arm.c:5926
+msgid "Literal referenced across section boundary (Implicit dump?)"
msgstr ""
-#: config/tc-arm.c:5693
+#: config/tc-arm.c:5939
#, c-format
msgid "Internal_relocation (type %d) not fixed up (IMMEDIATE)"
msgstr ""
-#: config/tc-arm.c:5699
+#: config/tc-arm.c:5945
+msgid "ADRL used for a symbol not defined in the same file"
+msgstr ""
+
+#: config/tc-arm.c:5951
#, c-format
msgid "Internal_relocation (type %d) not fixed up (OFFSET_IMM)"
msgstr ""
-#: config/tc-arm.c:5722
+#: config/tc-arm.c:5971 config/tc-mcore.c:2110 config/tc-ns32k.c:2283
+msgid "<unknown>"
+msgstr ""
+
+#: config/tc-arm.c:5974
#, c-format
msgid "Can not represent %s relocation in this object file format (%d)"
msgstr ""
-#: config/tc-arm.c:5740 config/tc-mips.c:11166 config/tc-sh.c:2282
+#: config/tc-arm.c:5995 config/tc-mips.c:11241 config/tc-sh.c:2859
#, c-format
msgid "Can not represent %s relocation in this object file format"
msgstr ""
-#: config/tc-arm.c:5753
+#: config/tc-arm.c:6013
msgid "md_estimate_size_before_relax\n"
msgstr ""
-#: config/tc-arm.c:5823
+#: config/tc-arm.c:6088
#, c-format
msgid "No operator -- statement `%s'\n"
msgstr ""
-#: config/tc-arm.c:5873 config/tc-arm.c:5925
+#: config/tc-arm.c:6106
+msgid "selected processor does not support this opcode"
+msgstr ""
+
+#: config/tc-arm.c:6150
#, c-format
-msgid "Opcode `%s' must have suffix from <%s>\n"
+msgid "Opcode `%s' must have suffix from list: <%s>"
msgstr ""
-#: config/tc-arm.c:5898
+#: config/tc-arm.c:6180
msgid "Warning: Use of the 'nv' conditional is deprecated\n"
msgstr ""
-#: config/tc-arm.c:6017
+#: config/tc-arm.c:6197
+#, c-format
+msgid "Opcode `%s' is unconditional\n"
+msgstr ""
+
+#: config/tc-arm.c:6222
+#, c-format
+msgid "Opcode `%s' must have suffix from <%s>\n"
+msgstr ""
+
+#: config/tc-arm.c:6308
#, c-format
msgid "register '%s' does not exist\n"
msgstr ""
-#: config/tc-arm.c:6023
+#: config/tc-arm.c:6313
#, c-format
msgid "ignoring redefinition of register alias '%s'"
msgstr ""
-#: config/tc-arm.c:6028
+#: config/tc-arm.c:6318
#, c-format
msgid ""
"ignoring redefinition of register alias '%s' to non-existant register '%s'"
msgstr ""
-#: config/tc-arm.c:6032
+#: config/tc-arm.c:6322
msgid "ignoring incomplete .req pseuso op"
msgstr ""
-#: config/tc-arm.c:6208
+#: config/tc-arm.c:6502
#, c-format
msgid "Unrecognised APCS switch -m%s"
msgstr ""
-#: config/tc-arm.c:6334 config/tc-arm.c:6345 config/tc-arm.c:6356
-#: config/tc-arm.c:6361
+#: config/tc-arm.c:6634 config/tc-arm.c:6645 config/tc-arm.c:6656
+#: config/tc-arm.c:6667 config/tc-arm.c:6672
#, c-format
msgid "Invalid architecture variant -m%s"
msgstr ""
-#: config/tc-arm.c:6368
+#: config/tc-arm.c:6679
#, c-format
msgid "Invalid processor variant -m%s"
msgstr ""
-#: config/tc-arm.c:6390
+#: config/tc-arm.c:6703
msgid ""
" ARM Specific Assembler Options:\n"
" -m[arm][<processor name>] select processor variant\n"
-" -m[arm]v[2|2a|3|3m|4|4t] select architecture variant\n"
+" -m[arm]v[2|2a|3|3m|4|4t|5[t][e]] select architecture variant\n"
" -mthumb only allow Thumb instructions\n"
" -mthumb-interwork mark the assembled code as supporting "
"interworking\n"
" -mno-fpu don't allow any floating-point instructions.\n"
msgstr ""
-#: config/tc-arm.c:6401
+#: config/tc-arm.c:6714
msgid " -k generate PIC code.\n"
msgstr ""
-#: config/tc-arm.c:6405
+#: config/tc-arm.c:6718
msgid ""
" -mapcs-32, -mapcs-26 specify which ARM Procedure Calling Standard to "
"use\n"
msgstr ""
-#: config/tc-arm.c:6408
+#: config/tc-arm.c:6721
msgid " -mapcs-float floating point args are passed in FP regs\n"
msgstr ""
-#: config/tc-arm.c:6411
+#: config/tc-arm.c:6724
msgid ""
" -mapcs-reentrant the code is position independent/reentrant\n"
msgstr ""
-#: config/tc-arm.c:6416
+#: config/tc-arm.c:6729
msgid " -moabi support the old ELF ABI\n"
msgstr ""
-#: config/tc-arm.c:6421
+#: config/tc-arm.c:6734
msgid ""
" -EB assemble code for a big endian cpu\n"
" -EL assemble code for a little endian cpu\n"
msgstr ""
-#: config/tc-arm.c:6594
+#: config/tc-arm.c:6883
#, c-format
msgid "%s: unexpected function type: %d"
msgstr ""
-#: config/tc-d10v.c:218
+#: config/tc-d10v.c:228
msgid ""
"D10V options:\n"
"-O optimize. Will do some operations in parallel.\n"
msgstr ""
-#: config/tc-d10v.c:521 config/tc-d10v.c:603 config/tc-d30v.c:639
+#: config/tc-d10v.c:547 config/tc-d10v.c:629 config/tc-d30v.c:652
#, c-format
msgid "operand out of range: %d"
msgstr ""
-#: config/tc-d10v.c:664
+#: config/tc-d10v.c:690
msgid "Instruction must be executed in parallel with another instruction."
msgstr ""
-#: config/tc-d10v.c:716
+#: config/tc-d10v.c:742
msgid "Instruction must be executed in parallel"
msgstr ""
-#: config/tc-d10v.c:719
+#: config/tc-d10v.c:745
msgid "Long instructions may not be combined."
msgstr ""
-#: config/tc-d10v.c:759
+#: config/tc-d10v.c:785
msgid "One of these instructions may not be executed in parallel."
msgstr ""
-#: config/tc-d10v.c:764 config/tc-d30v.c:843
+#: config/tc-d10v.c:790 config/tc-d30v.c:860
msgid "Two IU instructions may not be executed in parallel"
msgstr ""
-#: config/tc-d10v.c:766 config/tc-d10v.c:774 config/tc-d10v.c:789
-#: config/tc-d10v.c:802 config/tc-d30v.c:844 config/tc-d30v.c:853
+#: config/tc-d10v.c:792 config/tc-d10v.c:800 config/tc-d10v.c:815
+#: config/tc-d10v.c:828 config/tc-d30v.c:861 config/tc-d30v.c:870
msgid "Swapping instruction order"
msgstr ""
-#: config/tc-d10v.c:772 config/tc-d30v.c:850
+#: config/tc-d10v.c:798 config/tc-d30v.c:867
msgid "Two MU instructions may not be executed in parallel"
msgstr ""
-#: config/tc-d10v.c:793 config/tc-d30v.c:869
+#: config/tc-d10v.c:819 config/tc-d30v.c:886
msgid "IU instruction may not be in the left container"
msgstr ""
-#: config/tc-d10v.c:806 config/tc-d30v.c:882
+#: config/tc-d10v.c:832 config/tc-d30v.c:899
msgid "MU instruction may not be in the right container"
msgstr ""
-#: config/tc-d10v.c:810 config/tc-d30v.c:890
+#: config/tc-d10v.c:836 config/tc-d30v.c:907
msgid "unknown execution type passed to write_2_short()"
msgstr ""
-#: config/tc-d10v.c:1023 config/tc-d10v.c:1037 config/tc-h8300.c:1279
-#: config/tc-h8500.c:1122 config/tc-mcore.c:842 config/tc-sh.c:1040
-#: config/tc-z8k.c:1223
+#: config/tc-d10v.c:1049 config/tc-d10v.c:1063 config/tc-h8300.c:1279
+#: config/tc-h8500.c:1122 config/tc-mcore.c:989 config/tc-pj.c:274
+#: config/tc-sh.c:1349 config/tc-z8k.c:1223
msgid "can't find opcode "
msgstr ""
-#: config/tc-d10v.c:1050 config/tc-d10v.c:1068 config/tc-d30v.c:1368
+#: config/tc-d10v.c:1076 config/tc-d10v.c:1094 config/tc-d30v.c:1385
msgid "Unable to mix instructions as specified"
msgstr ""
-#: config/tc-d10v.c:1116 config/tc-d30v.c:1503
+#: config/tc-d10v.c:1142 config/tc-d30v.c:1520
#, c-format
msgid "unknown opcode: %s"
msgstr ""
-#: config/tc-d10v.c:1197 config/tc-d10v.c:1343 config/tc-tic80.c:537
+#: config/tc-d10v.c:1223 config/tc-d10v.c:1369 config/tc-tic80.c:537
msgid "bad opcode or operands"
msgstr ""
-#: config/tc-d10v.c:1246 config/tc-m68k.c:4232
+#: config/tc-d10v.c:1272 config/tc-m68k.c:4232
msgid "value out of range"
msgstr ""
-#: config/tc-d10v.c:1318
+#: config/tc-d10v.c:1344
msgid "illegal operand - register name found where none expected"
msgstr ""
-#: config/tc-d10v.c:1354 config/tc-tic80.c:548
+#: config/tc-d10v.c:1380 config/tc-tic80.c:548
msgid "Register number must be EVEN"
msgstr ""
-#: config/tc-d10v.c:1385 config/tc-d30v.c:1754 config/tc-mn10200.c:1234
-#: config/tc-mn10300.c:1425 config/tc-ppc.c:5004 config/tc-v850.c:2254
+#: config/tc-d10v.c:1412 config/tc-d30v.c:1772 config/tc-mn10200.c:1233
+#: config/tc-mn10300.c:1761 config/tc-ppc.c:5020 config/tc-v850.c:2255
#, c-format
msgid "reloc %d not supported by object file format"
msgstr ""
-#: config/tc-d10v.c:1498
+#: config/tc-d10v.c:1525
#, c-format
msgid "line %d: rep or repi must include at least 4 instructions"
msgstr ""
-#: config/tc-d10v.c:1517 config/tc-d30v.c:1935
+#: config/tc-d10v.c:1544 config/tc-d30v.c:1953
#, c-format
msgid "line %d: unknown relocation type: 0x%x"
msgstr ""
-#: config/tc-d30v.c:184
+#: config/tc-d30v.c:191
#, c-format
msgid "Register name %s conflicts with symbol of the same name"
msgstr ""
-#: config/tc-d30v.c:276
+#: config/tc-d30v.c:289
msgid ""
"\n"
"D30V options:\n"
"-C Opposite of -C. -c is the default.\n"
msgstr ""
-#: config/tc-d30v.c:450
+#: config/tc-d30v.c:463
msgid "unexpected 12-bit reloc type"
msgstr ""
-#: config/tc-d30v.c:457
+#: config/tc-d30v.c:470
msgid "unexpected 18-bit reloc type"
msgstr ""
-#: config/tc-d30v.c:701
+#: config/tc-d30v.c:714
#, c-format
msgid "%s NOP inserted"
msgstr ""
-#: config/tc-d30v.c:702
+#: config/tc-d30v.c:715
msgid "sequential"
msgstr ""
-#: config/tc-d30v.c:702
+#: config/tc-d30v.c:715
msgid "parallel"
msgstr ""
-#: config/tc-d30v.c:839
+#: config/tc-d30v.c:856
msgid "Instructions may not be executed in parallel"
msgstr ""
-#: config/tc-d30v.c:852 config/tc-d30v.c:859 config/tc-d30v.c:875
-#: config/tc-d30v.c:884
+#: config/tc-d30v.c:869 config/tc-d30v.c:876 config/tc-d30v.c:892
+#: config/tc-d30v.c:901
#, c-format
msgid "Executing %s in IU may not work"
msgstr ""
-#: config/tc-d30v.c:871
+#: config/tc-d30v.c:888
#, c-format
msgid "special left instruction `%s' kills instruction `%s' in right container"
msgstr ""
-#: config/tc-d30v.c:1250 config/tc-d30v.c:1267
+#: config/tc-d30v.c:1267 config/tc-d30v.c:1284
msgid "Cannot assemble instruction"
msgstr ""
-#: config/tc-d30v.c:1252
+#: config/tc-d30v.c:1269
msgid "First opcode is long. Unable to mix instructions as specified."
msgstr ""
-#: config/tc-d30v.c:1320
+#: config/tc-d30v.c:1337
msgid "word of NOPs added between word multiply and load"
msgstr ""
-#: config/tc-d30v.c:1322
+#: config/tc-d30v.c:1339
msgid "word of NOPs added between word multiply and 16-bit multiply"
msgstr ""
-#: config/tc-d30v.c:1352
+#: config/tc-d30v.c:1369
msgid "Instruction uses long version, so it cannot be mixed as specified"
msgstr ""
-#: config/tc-d30v.c:1436 config/tc-d30v.c:1473
+#: config/tc-d30v.c:1453 config/tc-d30v.c:1490
#, c-format
msgid "unknown condition code: %s"
msgstr ""
-#: config/tc-d30v.c:1466
+#: config/tc-d30v.c:1483
#, c-format
msgid "cmpu doesn't support condition code %s"
msgstr ""
-#: config/tc-d30v.c:1514
+#: config/tc-d30v.c:1531
#, c-format
msgid "operands for opcode `%s' do not match any valid format"
msgstr ""
-#: config/tc-d30v.c:1727
+#: config/tc-d30v.c:1744
msgid "Odd numbered register used as target of multi-register instruction"
msgstr ""
-#: config/tc-d30v.c:1824
+#: config/tc-d30v.c:1842
#, c-format
msgid "line %d: unable to place address of symbol '%s' into a byte"
msgstr ""
-#: config/tc-d30v.c:1827
+#: config/tc-d30v.c:1845
#, c-format
msgid "line %d: unable to place value %x into a byte"
msgstr ""
-#: config/tc-d30v.c:1835
+#: config/tc-d30v.c:1853
#, c-format
msgid "line %d: unable to place address of symbol '%s' into a short"
msgstr ""
-#: config/tc-d30v.c:1838
+#: config/tc-d30v.c:1856
#, c-format
msgid "line %d: unable to place value %x into a short"
msgstr ""
-#: config/tc-d30v.c:1846
+#: config/tc-d30v.c:1864
#, c-format
msgid "line %d: unable to place address of symbol '%s' into a quad"
msgstr ""
-#: config/tc-d30v.c:2016
+#: config/tc-d30v.c:2034
#, c-format
msgid "value too large to fit in %d bits"
msgstr ""
-#: config/tc-d30v.c:2159
+#: config/tc-d30v.c:2178
#, c-format
msgid "Alignment too large: %d assumed"
msgstr ""
+#: config/tc-fr30.c:84
+msgid " FR30 specific command line options:\n"
+msgstr ""
+
+#: config/tc-fr30.c:143
+#, c-format
+msgid "Instruction %s not allowed in a delay slot."
+msgstr ""
+
+#: config/tc-fr30.c:380 config/tc-m32r.c:1530
+msgid "Addend to unresolved symbol not on word boundary."
+msgstr ""
+
+#: config/tc-fr30.c:538 config/tc-i960.c:786 config/tc-m32r.c:1837
+msgid "Bad call to md_atof()"
+msgstr ""
+
#: config/tc-h8300.c:254 config/tc-h8300.c:262
msgid "Reg not valid for H8/300"
msgstr ""
msgid "invalid operands"
msgstr ""
-#: config/tc-h8300.c:1290 config/tc-h8500.c:1129 config/tc-mips.c:7932
-#: config/tc-sh.c:1047 config/tc-w65.c:759 config/tc-z8k.c:1235
+#: config/tc-h8300.c:1290 config/tc-h8500.c:1129 config/tc-mips.c:7965
+#: config/tc-sh.c:1578 config/tc-w65.c:759 config/tc-z8k.c:1235
msgid "unknown opcode"
msgstr ""
msgid "mismatch between opcode size and operand size"
msgstr ""
-#: config/tc-h8300.c:1348 config/tc-h8500.c:1157 config/tc-sh.c:1144
+#: config/tc-h8300.c:1348 config/tc-h8500.c:1157 config/tc-sh.c:1692
#: config/tc-w65.c:791 config/tc-z8k.c:1290
msgid "call to tc_crawl_symbol_chain \n"
msgstr ""
-#: config/tc-h8300.c:1362 config/tc-h8500.c:1171 config/tc-sh.c:1151
+#: config/tc-h8300.c:1362 config/tc-h8500.c:1171 config/tc-sh.c:1699
#: config/tc-w65.c:805 config/tc-z8k.c:1304
msgid "call to tc_headers_hook \n"
msgstr ""
msgid "@Rn needs word register"
msgstr ""
-#: config/tc-h8500.c:845 config/tc-sh.c:844
+#: config/tc-h8500.c:845 config/tc-sh.c:1145
#, c-format
msgid "unhandled %d\n"
msgstr ""
-#: config/tc-h8500.c:873 config/tc-sh.c:865
+#: config/tc-h8500.c:873 config/tc-sh.c:1167
#, c-format
msgid "operand must be absolute in range %d..%d"
msgstr ""
-#: config/tc-h8500.c:963 config/tc-sh.c:986
+#: config/tc-h8500.c:963 config/tc-sh.c:1293
#, c-format
msgid "failed for %d\n"
msgstr ""
-#: config/tc-h8500.c:1145 config/tc-sh.c:1082 config/tc-w65.c:779
+#: config/tc-h8500.c:1145 config/tc-sh.c:1388 config/tc-sh.c:1626
+#: config/tc-w65.c:779
msgid "invalid operands for opcode"
msgstr ""
-#: config/tc-hppa.c:1096
+#: config/tc-hppa.c:1140
msgid "Missing .exit\n"
msgstr ""
-#: config/tc-hppa.c:1099
+#: config/tc-hppa.c:1143
msgid "Missing .procend\n"
msgstr ""
-#: config/tc-hppa.c:1108
-msgid "Not in a space.\n"
-msgstr ""
-
-#: config/tc-hppa.c:1111
-msgid "Not in a subspace.\n"
-msgstr ""
-
-#: config/tc-hppa.c:1273
+#: config/tc-hppa.c:1322
msgid "Invalid field selector. Assuming F%%."
msgstr ""
-#: config/tc-hppa.c:1304
+#: config/tc-hppa.c:1353
msgid "-R option not supported on this target."
msgstr ""
-#: config/tc-hppa.c:1318
+#: config/tc-hppa.c:1369 config/tc-sparc.c:736 config/tc-sparc.c:771
#, c-format
msgid "Internal error: can't hash `%s': %s\n"
msgstr ""
-#: config/tc-hppa.c:1326 config/tc-i860.c:191 config/tc-sparc.c:704
+#: config/tc-hppa.c:1377 config/tc-i860.c:191
#, c-format
msgid "internal error: losing opcode: `%s' \"%s\"\n"
msgstr ""
-#: config/tc-hppa.c:1388 config/tc-hppa.c:5183 config/tc-hppa.c:5235
+#: config/tc-hppa.c:1446 config/tc-hppa.c:6873 config/tc-hppa.c:6928
msgid "Missing function name for .PROC (corrupted label chain)"
msgstr ""
-#: config/tc-hppa.c:1391 config/tc-hppa.c:5238
+#: config/tc-hppa.c:1449 config/tc-hppa.c:6931
msgid "Missing function name for .PROC"
msgstr ""
-#: config/tc-hppa.c:1494 config/tc-hppa.c:3463
+#: config/tc-hppa.c:1570 config/tc-hppa.c:4715
msgid "could not update architecture and machine"
msgstr ""
-#: config/tc-hppa.c:1625
+#: config/tc-hppa.c:1783
msgid "Invalid Indexed Load Completer."
msgstr ""
-#: config/tc-hppa.c:1630
+#: config/tc-hppa.c:1788
msgid "Invalid Indexed Load Completer Syntax."
msgstr ""
-#: config/tc-hppa.c:1654
+#: config/tc-hppa.c:1824
msgid "Invalid Short Load/Store Completer."
msgstr ""
-#: config/tc-hppa.c:1681 config/tc-hppa.c:1686
+#: config/tc-hppa.c:1883 config/tc-hppa.c:1888
msgid "Invalid Store Bytes Short Completer"
msgstr ""
-#: config/tc-hppa.c:1696 config/tc-hppa.c:1728
+#: config/tc-hppa.c:2199 config/tc-hppa.c:2205
+msgid "Invalid left/right combination completer"
+msgstr ""
+
+#: config/tc-hppa.c:2254 config/tc-hppa.c:2261
+msgid "Invalid permutation completer"
+msgstr ""
+
+#: config/tc-hppa.c:2362
#, c-format
-msgid "Invalid Compare/Subtract Condition: %c"
+msgid "Invalid Add Condition: %s"
msgstr ""
-#: config/tc-hppa.c:1711
-msgid "Invalid Compare/Subtract Condition."
+#: config/tc-hppa.c:2373 config/tc-hppa.c:2383
+#, c-format
+msgid "Invalid Add and Branch Condition: %c"
msgstr ""
-#: config/tc-hppa.c:1743
+#: config/tc-hppa.c:2404
msgid "Invalid Compare/Subtract Condition"
msgstr ""
-#: config/tc-hppa.c:1821 config/tc-hppa.c:1894
+#: config/tc-hppa.c:2444
#, c-format
-msgid "Invalid Add Condition: %s"
+msgid "Invalid Bit Branch Condition: %c"
+msgstr ""
+
+#: config/tc-hppa.c:2530
+#, c-format
+msgid "Invalid Compare/Subtract Condition: %s"
msgstr ""
-#: config/tc-hppa.c:1948 config/tc-hppa.c:2025
+#: config/tc-hppa.c:2542
+#, c-format
+msgid "Invalid Compare/Subtract Condition: %c"
+msgstr ""
+
+#: config/tc-hppa.c:2557
+msgid "Invalid Compare and Branch Condition."
+msgstr ""
+
+#: config/tc-hppa.c:2655
msgid "Invalid Logical Instruction Condition."
msgstr ""
-#: config/tc-hppa.c:2067
+#: config/tc-hppa.c:2711
msgid "Invalid Shift/Extract/Deposit Condition."
msgstr ""
-#: config/tc-hppa.c:2089
-#, c-format
-msgid "Invalid Bit Branch Condition: %c"
+#: config/tc-hppa.c:2823
+msgid "Invalid Unit Instruction Condition."
msgstr ""
-#: config/tc-hppa.c:2202 config/tc-hppa.c:2235 config/tc-hppa.c:2272
+#: config/tc-hppa.c:3096 config/tc-hppa.c:3129 config/tc-hppa.c:3166
+#: config/tc-hppa.c:3205
msgid "Branch to unaligned address"
msgstr ""
-#: config/tc-hppa.c:2335
+#: config/tc-hppa.c:3389
msgid "Invalid SFU identifier"
msgstr ""
-#: config/tc-hppa.c:2375
+#: config/tc-hppa.c:3439
msgid "Invalid COPR identifier"
msgstr ""
-#: config/tc-hppa.c:2500 config/tc-hppa.c:2521 config/tc-hppa.c:2541
-#: config/tc-hppa.c:2561 config/tc-hppa.c:2581
-msgid "Invalid register for single precision fmpyadd or fmpysub"
+#: config/tc-hppa.c:3568
+msgid "Invalid Floating Point Operand Format."
msgstr ""
-#: config/tc-hppa.c:2605
-msgid "Invalid Floating Point Operand Format."
+#: config/tc-hppa.c:3706 config/tc-hppa.c:3730 config/tc-hppa.c:3753
+#: config/tc-hppa.c:3776 config/tc-hppa.c:3799
+msgid "Invalid register for single precision fmpyadd or fmpysub"
msgstr ""
-#: config/tc-hppa.c:2628
+#: config/tc-hppa.c:3848
#, c-format
msgid "Invalid operands %s"
msgstr ""
-#: config/tc-hppa.c:3163
+#: config/tc-hppa.c:4415
msgid "Unknown relocation encountered in md_apply_fix."
msgstr ""
-#: config/tc-hppa.c:3173
+#: config/tc-hppa.c:4425
#, c-format
msgid "no hppa_fixup entry for this fixup (fixP = 0x%x, type = 0x%x)\n"
msgstr ""
-#: config/tc-hppa.c:3315 config/tc-hppa.c:3340
+#: config/tc-hppa.c:4567 config/tc-hppa.c:4592
#, c-format
msgid "Undefined register: '%s'."
msgstr ""
-#: config/tc-hppa.c:3378
+#: config/tc-hppa.c:4630
#, c-format
msgid "Non-absolute symbol: '%s'."
msgstr ""
-#: config/tc-hppa.c:3393
+#: config/tc-hppa.c:4645
#, c-format
msgid "Undefined absolute constant: '%s'."
msgstr ""
-#: config/tc-hppa.c:3502
+#: config/tc-hppa.c:4754
#, c-format
msgid "Invalid FP Compare Condition: %s"
msgstr ""
-#: config/tc-hppa.c:3543
+#: config/tc-hppa.c:4810
+#, c-format
+msgid "Invalid FTEST completer: %s"
+msgstr ""
+
+#: config/tc-hppa.c:4877 config/tc-hppa.c:4915
#, c-format
msgid "Invalid FP Operand Format: %3s"
msgstr ""
-#: config/tc-hppa.c:3624
+#: config/tc-hppa.c:4994
msgid "Bad segment in expression."
msgstr ""
-#: config/tc-hppa.c:3675
+#: config/tc-hppa.c:5053
msgid "Bad segment (should be absolute)."
msgstr ""
-#: config/tc-hppa.c:3774
+#: config/tc-hppa.c:5152
#, c-format
msgid "Invalid argument location: %s\n"
msgstr ""
-#: config/tc-hppa.c:3805
+#: config/tc-hppa.c:5183
#, c-format
msgid "Invalid argument description: %d"
msgstr ""
-#: config/tc-hppa.c:3828
+#: config/tc-hppa.c:5206
#, c-format
msgid "Invalid Nullification: (%c)"
msgstr ""
-#: config/tc-hppa.c:4301
+#: config/tc-hppa.c:5950
#, c-format
msgid "Invalid .CALL argument: %s"
msgstr ""
-#: config/tc-hppa.c:4420
+#: config/tc-hppa.c:6082
msgid ".callinfo is not within a procedure definition"
msgstr ""
-#: config/tc-hppa.c:4440
+#: config/tc-hppa.c:6102
#, c-format
msgid "FRAME parameter must be a multiple of 8: %d\n"
msgstr ""
-#: config/tc-hppa.c:4459
+#: config/tc-hppa.c:6121
msgid "Value for ENTRY_GR must be in the range 3..18\n"
msgstr ""
-#: config/tc-hppa.c:4471
+#: config/tc-hppa.c:6133
msgid "Value for ENTRY_FR must be in the range 12..21\n"
msgstr ""
-#: config/tc-hppa.c:4481
+#: config/tc-hppa.c:6143
msgid "Value for ENTRY_SR must be 3\n"
msgstr ""
-#: config/tc-hppa.c:4537
+#: config/tc-hppa.c:6199
#, c-format
msgid "Invalid .CALLINFO argument: %s"
msgstr ""
-#: config/tc-hppa.c:4627
+#: config/tc-hppa.c:6293
msgid "The .ENTER pseudo-op is not supported"
msgstr ""
-#: config/tc-hppa.c:4641
+#: config/tc-hppa.c:6309
msgid "Misplaced .entry. Ignored."
msgstr ""
-#: config/tc-hppa.c:4645
+#: config/tc-hppa.c:6313
msgid "Missing .callinfo."
msgstr ""
-#: config/tc-hppa.c:4693
+#: config/tc-hppa.c:6361
msgid ".REG must use a label"
msgstr ""
-#: config/tc-hppa.c:4695
+#: config/tc-hppa.c:6363
msgid ".EQU must use a label"
msgstr ""
-#: config/tc-hppa.c:4746
+#: config/tc-hppa.c:6416
msgid ".EXIT must appear within a procedure"
msgstr ""
-#: config/tc-hppa.c:4750
+#: config/tc-hppa.c:6420
msgid "Missing .callinfo"
msgstr ""
-#: config/tc-hppa.c:4754
+#: config/tc-hppa.c:6424
msgid "No .ENTRY for this .EXIT"
msgstr ""
-#: config/tc-hppa.c:4781
+#: config/tc-hppa.c:6451
#, c-format
msgid "Cannot define export symbol: %s\n"
msgstr ""
-#: config/tc-hppa.c:4834
+#: config/tc-hppa.c:6504
#, c-format
msgid "Using ENTRY rather than CODE in export directive for %s"
msgstr ""
-#: config/tc-hppa.c:4935
+#: config/tc-hppa.c:6613
#, c-format
msgid "Undefined .EXPORT/.IMPORT argument (ignored): %s"
msgstr ""
-#: config/tc-hppa.c:5017
+#: config/tc-hppa.c:6695
msgid "Missing label name on .LABEL"
msgstr ""
-#: config/tc-hppa.c:5022
+#: config/tc-hppa.c:6700
msgid "extra .LABEL arguments ignored."
msgstr ""
-#: config/tc-hppa.c:5037
+#: config/tc-hppa.c:6717
msgid "The .LEAVE pseudo-op is not supported"
msgstr ""
-#: config/tc-hppa.c:5070
+#: config/tc-hppa.c:6756
msgid "Unrecognized .LEVEL argument\n"
msgstr ""
-#: config/tc-hppa.c:5104
+#: config/tc-hppa.c:6792
#, c-format
msgid "Cannot define static symbol: %s\n"
msgstr ""
-#: config/tc-hppa.c:5137
+#: config/tc-hppa.c:6827
msgid "Nested procedures"
msgstr ""
-#: config/tc-hppa.c:5147
+#: config/tc-hppa.c:6837
msgid "Cannot allocate unwind descriptor\n"
msgstr ""
-#: config/tc-hppa.c:5242
+#: config/tc-hppa.c:6935
msgid "misplaced .procend"
msgstr ""
-#: config/tc-hppa.c:5245
+#: config/tc-hppa.c:6938
msgid "Missing .callinfo for this procedure"
msgstr ""
-#: config/tc-hppa.c:5248
+#: config/tc-hppa.c:6941
msgid "Missing .EXIT for a .ENTRY"
msgstr ""
-#: config/tc-hppa.c:5348
+#: config/tc-hppa.c:6980
+msgid "Not in a space.\n"
+msgstr ""
+
+#: config/tc-hppa.c:6983
+msgid "Not in a subspace.\n"
+msgstr ""
+
+#: config/tc-hppa.c:7073
msgid "Invalid .SPACE argument"
msgstr ""
-#: config/tc-hppa.c:5396
+#: config/tc-hppa.c:7121
msgid "Can't change spaces within a procedure definition. Ignored"
msgstr ""
-#: config/tc-hppa.c:5523
+#: config/tc-hppa.c:7248
#, c-format
msgid "Undefined space: '%s' Assuming space number = 0."
msgstr ""
-#: config/tc-hppa.c:5565
+#: config/tc-hppa.c:7272
msgid "Must be in a space before changing or declaring subspaces.\n"
msgstr ""
-#: config/tc-hppa.c:5569
+#: config/tc-hppa.c:7276
msgid "Can't change subspaces within a procedure definition. Ignored"
msgstr ""
-#: config/tc-hppa.c:5605
+#: config/tc-hppa.c:7311
msgid "Parameters of an existing subspace can't be modified"
msgstr ""
-#: config/tc-hppa.c:5658
+#: config/tc-hppa.c:7362
msgid "Alignment must be a power of 2"
msgstr ""
-#: config/tc-hppa.c:5700
+#: config/tc-hppa.c:7404
msgid "FIRST not supported as a .SUBSPACE argument"
msgstr ""
-#: config/tc-hppa.c:5702
+#: config/tc-hppa.c:7406
msgid "Invalid .SUBSPACE argument"
msgstr ""
-#: config/tc-hppa.c:5742
-msgid "Ignoring subspace decl due to ELF BFD bugs."
-msgstr ""
-
-#: config/tc-hppa.c:5905
+#: config/tc-hppa.c:7589
#, c-format
msgid "Internal error: Unable to find containing space for %s."
msgstr ""
-#: config/tc-hppa.c:5946
+#: config/tc-hppa.c:7630
#, c-format
msgid "Out of memory: could not allocate new space chain entry: %s\n"
msgstr ""
-#: config/tc-hppa.c:6032
+#: config/tc-hppa.c:7716
#, c-format
msgid "Out of memory: could not allocate new subspace chain entry: %s\n"
msgstr ""
-#: config/tc-hppa.c:6688
+#: config/tc-hppa.c:8383
#, c-format
msgid "Symbol '%s' could not be created."
msgstr ""
-#: config/tc-hppa.c:6692
+#: config/tc-hppa.c:8387
msgid "No memory for symbol name."
msgstr ""
-#: config/tc-i386.c:502
+#: config/tc-i386.c:509
msgid "same type of prefix used twice"
msgstr ""
-#: config/tc-i386.c:536
+#: config/tc-i386.c:552
msgid "Bad argument to syntax directive."
msgstr ""
-#: config/tc-i386.c:619 config/tc-m68k.c:3750
+#: config/tc-i386.c:636 config/tc-m68k.c:3750
#, c-format
msgid "Internal Error: Can't hash %s: %s"
msgstr ""
-#: config/tc-i386.c:851
+#: config/tc-i386.c:866
msgid "Unknown"
msgstr ""
-#: config/tc-i386.c:899 config/tc-i386.c:4360 config/tc-m68k.c:772
+#: config/tc-i386.c:914 config/tc-i386.c:4407 config/tc-m68k.c:772
#, c-format
msgid "Can not do %d byte pc-relative relocation"
msgstr ""
-#: config/tc-i386.c:909 config/tc-i386.c:4374 config/tc-m68k.c:779
+#: config/tc-i386.c:924 config/tc-i386.c:4421 config/tc-m68k.c:779
#, c-format
msgid "Can not do %d byte relocation"
msgstr ""
-#: config/tc-i386.c:1010 config/tc-i386.c:1096
+#: config/tc-i386.c:1030 config/tc-i386.c:1113
#, c-format
msgid "no such 386 instruction: `%s'"
msgstr ""
-#: config/tc-i386.c:1019
+#: config/tc-i386.c:1039
#, c-format
msgid "invalid character %s in mnemonic"
msgstr ""
-#: config/tc-i386.c:1026
+#: config/tc-i386.c:1046
msgid "expecting prefix; got nothing"
msgstr ""
-#: config/tc-i386.c:1028
+#: config/tc-i386.c:1048
msgid "expecting mnemonic; got nothing"
msgstr ""
-#: config/tc-i386.c:1046
+#: config/tc-i386.c:1066
#, c-format
msgid "redundant %s prefix"
msgstr ""
-#: config/tc-i386.c:1105
+#: config/tc-i386.c:1122
#, c-format
msgid "expecting string instruction after `%s'"
msgstr ""
-#: config/tc-i386.c:1128
+#: config/tc-i386.c:1145
#, c-format
msgid "invalid character %s before operand %d"
msgstr ""
-#: config/tc-i386.c:1142
+#: config/tc-i386.c:1159
#, c-format
msgid "unbalanced parenthesis in operand %d."
msgstr ""
-#: config/tc-i386.c:1145
+#: config/tc-i386.c:1162
#, c-format
msgid "unbalanced brackets in operand %d."
msgstr ""
-#: config/tc-i386.c:1154
+#: config/tc-i386.c:1171
#, c-format
msgid "invalid character %s in operand %d"
msgstr ""
-#: config/tc-i386.c:1181
+#: config/tc-i386.c:1198
#, c-format
msgid "spurious operands; (%d operands/instruction max)"
msgstr ""
-#: config/tc-i386.c:1202
+#: config/tc-i386.c:1219
msgid "expecting operand after ','; got nothing"
msgstr ""
-#: config/tc-i386.c:1207
+#: config/tc-i386.c:1224
msgid "expecting operand before ','; got nothing"
msgstr ""
#. we found no match
-#: config/tc-i386.c:1434
+#: config/tc-i386.c:1461
#, c-format
msgid "suffix or operands invalid for `%s'"
msgstr ""
+#: config/tc-i386.c:1469
+#, c-format
+msgid "Indirect %s without `*'"
+msgstr ""
+
#. Warn them that a data or address size prefix doesn't affect
#. assembly of the next line of code.
-#: config/tc-i386.c:1443
+#: config/tc-i386.c:1476
#, c-format
msgid "stand-alone `%s' prefix"
msgstr ""
-#: config/tc-i386.c:1467 config/tc-i386.c:1482
+#: config/tc-i386.c:1511 config/tc-i386.c:1526
msgid "`%s' operand %d must use `%%es' segment"
msgstr ""
-#: config/tc-i386.c:1548 config/tc-i386.c:1589 config/tc-i386.c:1616
+#: config/tc-i386.c:1593 config/tc-i386.c:1634 config/tc-i386.c:1661
msgid "using `%%%s' instead of `%%%s' due to `%c' suffix"
msgstr ""
-#: config/tc-i386.c:1561 config/tc-i386.c:1578 config/tc-i386.c:1605
+#: config/tc-i386.c:1606 config/tc-i386.c:1623 config/tc-i386.c:1650
msgid "`%%%s' not allowed with `%s%c'"
msgstr ""
-#: config/tc-i386.c:1645 config/tc-i386.c:1665
+#: config/tc-i386.c:1694 config/tc-i386.c:1714
msgid "no instruction mnemonic suffix given; can't determine immediate size"
msgstr ""
-#: config/tc-i386.c:1690
+#: config/tc-i386.c:1739
msgid ""
"no instruction mnemonic suffix given and no register operands; can't size "
"instruction"
msgstr ""
#. reversed arguments on faddp, fsubp, etc.
-#: config/tc-i386.c:1803
+#: config/tc-i386.c:1841
msgid "translating to `%s %%%s,%%%s'"
msgstr ""
#. extraneous `l' suffix on fp insn
-#: config/tc-i386.c:1810
+#: config/tc-i386.c:1848
msgid "translating to `%s %%%s'"
msgstr ""
-#: config/tc-i386.c:2022
+#: config/tc-i386.c:2063
msgid "you can't `pop %%cs'"
msgstr ""
-#. UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc
-#: config/tc-i386.c:2053
+#. UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc.
+#: config/tc-i386.c:2094
#, c-format
msgid "translating to `%sp'"
msgstr ""
-#: config/tc-i386.c:2084 config/tc-i386.c:2187 config/tc-i386.c:2247
+#: config/tc-i386.c:2143 config/tc-i386.c:2205 config/tc-i386.c:2247
msgid "skipping prefixes on this instruction"
msgstr ""
-#: config/tc-i386.c:2104 config/tc-i386.c:2211 config/tc-i386.c:2260
+#: config/tc-i386.c:2262
msgid "16-bit jump out of range"
msgstr ""
-#: config/tc-i386.c:2206
+#: config/tc-i386.c:2271
#, c-format
-msgid "`%s' only takes byte displacement; %ld shortened to %d"
+msgid "can't handle non absolute segment in `%s'"
msgstr ""
-#: config/tc-i386.c:2269
+#: config/tc-i386.c:2379 config/tc-i386.c:2429
#, c-format
-msgid "can't handle non absolute segment in `%s'"
+msgid "%ld shortened to %ld"
msgstr ""
-#: config/tc-i386.c:2527
+#: config/tc-i386.c:2499
msgid "Only 1 or 2 immediate operands are allowed"
msgstr ""
-#: config/tc-i386.c:2558 config/tc-i386.c:2788
+#: config/tc-i386.c:2531 config/tc-i386.c:2755
msgid "GOT relocations not supported in 16 bit mode"
msgstr ""
-#: config/tc-i386.c:2579 config/tc-i386.c:2809
+#: config/tc-i386.c:2552 config/tc-i386.c:2776
msgid "Bad reloc specifier in expression"
msgstr ""
-#: config/tc-i386.c:2597 config/tc-i386.c:2843
+#: config/tc-i386.c:2570 config/tc-i386.c:2810
#, c-format
msgid "Ignoring junk `%s' after expression"
msgstr ""
#. missing or bad expr becomes absolute 0
-#: config/tc-i386.c:2604
+#: config/tc-i386.c:2577
#, c-format
msgid "Missing or invalid immediate expression `%s' taken as 0"
msgstr ""
-#: config/tc-i386.c:2639 config/tc-i386.c:2862
+#: config/tc-i386.c:2607 config/tc-i386.c:2853
+#, c-format
+msgid "Unimplemented segment %s in operand"
+msgstr ""
+
+#: config/tc-i386.c:2609 config/tc-i386.c:2855
#, c-format
msgid "Unimplemented segment type %d in operand"
msgstr ""
-#: config/tc-i386.c:2682
+#: config/tc-i386.c:2653
#, c-format
msgid "expecting scale factor of 1, 2, 4, or 8: got `%s'"
msgstr ""
-#: config/tc-i386.c:2688
+#: config/tc-i386.c:2659
#, c-format
msgid "scale factor of %d without an index register"
msgstr ""
-#: config/tc-i386.c:3037 config/tc-i386.c:3043 config/tc-i386.c:3052
+#. missing or bad expr becomes absolute 0
+#: config/tc-i386.c:2821
+#, c-format
+msgid "Missing or invalid displacement expression `%s' taken as 0"
+msgstr ""
+
+#: config/tc-i386.c:3035 config/tc-i386.c:3041 config/tc-i386.c:3050
#, c-format
msgid "bad segment name `%s'"
msgstr ""
-#: config/tc-i386.c:3218 config/tc-i386.c:3473
+#: config/tc-i386.c:3108
#, c-format
-msgid "too many memory references for `%s'"
+msgid "`%s' is not a valid base/index expression"
msgstr ""
-#: config/tc-i386.c:3329 config/tc-i386.c:3342 config/tc-i386.c:3654
-#: config/tc-i386.c:3667
+#: config/tc-i386.c:3112
#, c-format
msgid "`%s' is not a valid %s bit base/index expression"
msgstr ""
-#: config/tc-i386.c:3426
+#: config/tc-i386.c:3133 config/tc-i386.c:3487
+#, c-format
+msgid "too many memory references for `%s'"
+msgstr ""
+
+#: config/tc-i386.c:3219 config/tc-i386.c:3354 config/tc-i386.c:3457
+#: config/tc-i386.c:3572 config/tc-i386.c:3608
+#, c-format
+msgid "bad register name `%s'"
+msgstr ""
+
+#: config/tc-i386.c:3433
#, c-format
msgid "bad memory operand `%s'"
msgstr ""
-#: config/tc-i386.c:3441
+#: config/tc-i386.c:3448
#, c-format
msgid "Junk `%s' after register"
msgstr ""
-#: config/tc-i386.c:3582
+#: config/tc-i386.c:3465
+msgid "Immediate operand illegal with absolute jump"
+msgstr ""
+
+#: config/tc-i386.c:3565
#, c-format
msgid "expecting `,' or `)' after index register in `%s'"
msgstr ""
-#: config/tc-i386.c:3599
+#: config/tc-i386.c:3587
#, c-format
msgid "expecting `)' after scale factor in `%s'"
msgstr ""
-#: config/tc-i386.c:3606
+#: config/tc-i386.c:3594
#, c-format
msgid "expecting index register or scale factor after `,'; got '%c'"
msgstr ""
-#: config/tc-i386.c:3613
+#: config/tc-i386.c:3601
#, c-format
msgid "expecting `,' or `)' after base register in `%s'"
msgstr ""
#. it's not a memory operand; argh!
-#: config/tc-i386.c:3676
+#: config/tc-i386.c:3641
#, c-format
msgid "invalid char %s beginning operand %d `%s'"
msgstr ""
-#: config/tc-i386.c:4095
+#: config/tc-i386.c:4099
msgid "Bad call to md_atof ()"
msgstr ""
-#: config/tc-i386.c:4156 config/tc-i386.c:4169
-#, c-format
-msgid "bad register name `%s'"
+#: config/tc-i386.c:4250
+msgid " -m\t\t\t do long jump\n"
msgstr ""
-#: config/tc-i386.c:4223
-msgid "-m\t\t\tdo long jump\n"
+#: config/tc-i386.c:4253
+msgid ""
+" -V\t\t\t print assembler version number\n"
+" -k\t\t\t ignored\n"
+" -Qy, -Qn\t\t ignored\n"
+" -q\t\t\t ignored\n"
+" -s\t\t\t ignored\n"
msgstr ""
-#: config/tc-i386.c:4263
+#: config/tc-i386.c:4307
msgid "GOT already in symbol table"
msgstr ""
-#: config/tc-i386.c:4409 config/tc-mcore.c:2130 config/tc-sh.c:2421
+#: config/tc-i386.c:4456 config/tc-mcore.c:2421 config/tc-pj.c:586
+#: config/tc-sh.c:2998
#, c-format
msgid "Cannot represent relocation type %s"
msgstr ""
msgid "Unknown temporary pseudo register"
msgstr ""
-#: config/tc-i860.c:183 config/tc-mips.c:1013 config/tc-sparc.c:696
+#: config/tc-i860.c:183 config/tc-mips.c:1059
#, c-format
msgid "internal error: can't hash `%s': %s\n"
msgstr ""
msgid "Illegal operands"
msgstr ""
-#: config/tc-i860.c:749 config/tc-sparc.c:2338
+#: config/tc-i860.c:749 config/tc-sparc.c:2634
msgid "bad segment"
msgstr ""
msgid "improper number of operands. expecting %d, got %d"
msgstr ""
-#: config/tc-i960.c:786 config/tc-m32r.c:1239
-msgid "Bad call to md_atof()"
-msgstr ""
-
#: config/tc-i960.c:876
#, c-format
msgid "Fixup of %ld too large for field width of %d"
msgid "Redefining leafproc %s"
msgstr ""
-#: config/tc-i960.c:2667
+#: config/tc-i960.c:2669
msgid "should have two operands"
msgstr ""
-#: config/tc-i960.c:2677
+#: config/tc-i960.c:2679
msgid "'entry_num' must be absolute number in [0,31]"
msgstr ""
-#: config/tc-i960.c:2686
+#: config/tc-i960.c:2688
#, c-format
msgid "Redefining entrynum for sysproc %s"
msgstr ""
-#: config/tc-i960.c:2797
+#: config/tc-i960.c:2799
msgid "architecture of opcode conflicts with that of earlier instruction(s)"
msgstr ""
-#: config/tc-i960.c:2818
+#: config/tc-i960.c:2820
msgid "big endian mode is not supported"
msgstr ""
-#: config/tc-i960.c:2820
+#: config/tc-i960.c:2822
#, c-format
msgid "ignoring unrecognized .endian type `%s'"
msgstr ""
-#: config/tc-i960.c:3123
+#: config/tc-i960.c:3104
#, c-format
msgid "leafproc symbol '%s' undefined"
msgstr ""
-#: config/tc-i960.c:3133
+#: config/tc-i960.c:3114
#, c-format
msgid "Warning: making leafproc entries %s and %s both global\n"
msgstr ""
-#: config/tc-i960.c:3242
+#: config/tc-i960.c:3223
msgid "option --link-relax is only supported in b.out format"
msgstr ""
-#: config/tc-i960.c:3285
+#: config/tc-i960.c:3266
msgid "callj to difference of two symbols"
msgstr ""
-#: config/tc-m32r.c:191
+#. Pretend that we do not recognise this option.
+#: config/tc-m32r.c:218
+msgid "Unrecognised option: -hidden"
+msgstr ""
+
+#: config/tc-m32r.c:251
msgid " M32R specific command line options:\n"
msgstr ""
-#: config/tc-m32r.c:194
+#: config/tc-m32r.c:253
+msgid " -m32rx support the extended m32rx instruction set\n"
+msgstr ""
+
+#: config/tc-m32r.c:255
+msgid " -O try to combine instructions in parallel\n"
+msgstr ""
+
+#: config/tc-m32r.c:258
+msgid ""
+" -warn-explicit-parallel-conflicts warn when parallel instructions\n"
+msgstr ""
+
+#: config/tc-m32r.c:260
+msgid " violate contraints\n"
+msgstr ""
+
+#: config/tc-m32r.c:262
+msgid " -no-warn-explicit-parallel-conflicts do not warn when parallel\n"
+msgstr ""
+
+#: config/tc-m32r.c:264
+msgid ""
+" instructions violate contraints\n"
+msgstr ""
+
+#: config/tc-m32r.c:266
+msgid ""
+" -Wp synonym for -warn-explicit-parallel-conflicts\n"
+msgstr ""
+
+#: config/tc-m32r.c:268
+msgid ""
+" -Wnp synonym for -no-warn-explicit-parallel-conflicts\n"
+msgstr ""
+
+#: config/tc-m32r.c:271
msgid ""
" -warn-unmatched-high warn when an (s)high reloc has no matching low "
"reloc\n"
msgstr ""
-#: config/tc-m32r.c:196
+#: config/tc-m32r.c:273
msgid " -no-warn-unmatched-high do not warn about missing low relocs\n"
msgstr ""
-#: config/tc-m32r.c:198
+#: config/tc-m32r.c:275
msgid " -Wuh synonym for -warn-unmatched-high\n"
msgstr ""
-#: config/tc-m32r.c:200
+#: config/tc-m32r.c:277
msgid " -Wnuh synonym for -no-warn-unmatched-high\n"
msgstr ""
-#: config/tc-m32r.c:204
+#: config/tc-m32r.c:281
msgid " -relax create linker relaxable code\n"
msgstr ""
-#: config/tc-m32r.c:206
+#: config/tc-m32r.c:283
msgid " -cpu-desc provide runtime cpu description file\n"
msgstr ""
-#: config/tc-m32r.c:331 read.c:2755 read.c:4824
+#: config/tc-m32r.c:678
+msgid "Instructions write to the same destination register."
+msgstr ""
+
+#: config/tc-m32r.c:686
+msgid "Instructions do not use parallel execution pipelines."
+msgstr ""
+
+#: config/tc-m32r.c:693
+msgid "Instructions share the same execution pipeline"
+msgstr ""
+
+#: config/tc-m32r.c:762 config/tc-m32r.c:848
#, c-format
-msgid "symbol `%s' already defined"
+msgid "not a 16 bit instruction '%s'"
+msgstr ""
+
+#: config/tc-m32r.c:769 config/tc-m32r.c:855 config/tc-m32r.c:1010
+#, c-format
+msgid "unknown instruction '%s'"
+msgstr ""
+
+#: config/tc-m32r.c:777 config/tc-m32r.c:862 config/tc-m32r.c:1017
+#, c-format
+msgid "instruction '%s' is for the M32RX only"
+msgstr ""
+
+#: config/tc-m32r.c:785 config/tc-m32r.c:870
+#, c-format
+msgid "instruction '%s' cannot be executed in parallel."
+msgstr ""
+
+#: config/tc-m32r.c:832 config/tc-m32r.c:895 config/tc-m32r.c:1067
+msgid "internal error: lookup/get operands failed"
+msgstr ""
+
+#: config/tc-m32r.c:880
+#, c-format
+msgid "'%s': only the NOP instruction can be issued in parallel on the m32r"
+msgstr ""
+
+#: config/tc-m32r.c:909
+#, c-format
+msgid ""
+"%s: output of 1st instruction is the same as an input to 2nd instruction - "
+"is this intentional ?"
msgstr ""
-#: config/tc-m32r.c:630 config/tc-ppc.c:1336 config/tc-ppc.c:3540 read.c:1368
+#: config/tc-m32r.c:913
+#, c-format
+msgid ""
+"%s: output of 2nd instruction is the same as an input to 1st instruction - "
+"is this intentional ?"
+msgstr ""
+
+#: config/tc-m32r.c:1228 config/tc-ppc.c:1337 config/tc-ppc.c:3547 read.c:1359
msgid "Expected comma after symbol-name: rest of line ignored."
msgstr ""
-#: config/tc-m32r.c:639
+#: config/tc-m32r.c:1237
#, c-format
msgid ".SCOMMon length (%ld.) <0! Ignored."
msgstr ""
-#: config/tc-m32r.c:653 config/tc-ppc.c:1358 config/tc-ppc.c:2267
-#: config/tc-ppc.c:3564
+#: config/tc-m32r.c:1251 config/tc-ppc.c:1359 config/tc-ppc.c:2266
+#: config/tc-ppc.c:3571
msgid "ignoring bad alignment"
msgstr ""
-#: config/tc-m32r.c:679 config/tc-ppc.c:1369 config/tc-ppc.c:3576 read.c:1388
-#: read.c:2104
+#: config/tc-m32r.c:1277 config/tc-ppc.c:1370 config/tc-ppc.c:3583 read.c:1379
+#: read.c:2102
#, c-format
msgid "Ignoring attempt to re-define symbol `%s'."
msgstr ""
-#: config/tc-m32r.c:688
+#: config/tc-m32r.c:1286
#, c-format
msgid "Length of .scomm \"%s\" is already %ld. Not changed to %ld."
msgstr ""
-#: config/tc-m32r.c:932
-msgid "Addend to unresolved symbol not on word boundary."
-msgstr ""
-
-#: config/tc-m32r.c:1161
+#: config/tc-m32r.c:1759
msgid "Unmatched high/shigh reloc"
msgstr ""
msgid "Can not do %d byte pic relocation"
msgstr ""
-#: config/tc-m68k.c:885 config/tc-mips.c:11148
+#: config/tc-m68k.c:885 config/tc-mips.c:11223
#, c-format
msgid "Cannot make %s relocation PC relative"
msgstr ""
msgid "Relaxation should never occur"
msgstr ""
-#: config/tc-m88k.c:1267 config/tc-sparc.c:3025 read.c:1961
+#: config/tc-m88k.c:1267 config/tc-sparc.c:3353 read.c:1954
#, c-format
msgid "BSS length (%d.) <0! Ignored."
msgstr ""
msgid "Ignoring attempt to re-define symbol %s."
msgstr ""
-#: config/tc-mcore.c:402
+#: config/tc-mcore.c:509
#, c-format
msgid "register expected, but saw '%.6s'"
msgstr ""
-#: config/tc-mcore.c:486
+#: config/tc-mcore.c:593
#, c-format
msgid "control register expected, but saw '%.6s'"
msgstr ""
-#: config/tc-mcore.c:645
+#: config/tc-mcore.c:631
+msgid "bad/missing psr specifier"
+msgstr ""
+
+#: config/tc-mcore.c:792
msgid "more than 65K literal pools"
msgstr ""
-#: config/tc-mcore.c:699
+#: config/tc-mcore.c:846
msgid "missing ']'"
msgstr ""
-#: config/tc-mcore.c:739
+#: config/tc-mcore.c:886
msgid "operand must be a constant"
msgstr ""
-#: config/tc-mcore.c:741
+#: config/tc-mcore.c:888
#, c-format
msgid "operand must be absolute in range %d..%d, not %d"
msgstr ""
-#: config/tc-mcore.c:779
+#: config/tc-mcore.c:926
msgid "operand must be a multiple of 4"
msgstr ""
-#: config/tc-mcore.c:786
+#: config/tc-mcore.c:933
msgid "operand must be a multiple of 2"
msgstr ""
-#: config/tc-mcore.c:800 config/tc-mcore.c:1301 config/tc-mcore.c:1355
+#: config/tc-mcore.c:947 config/tc-mcore.c:1459 config/tc-mcore.c:1513
msgid "base register expected"
msgstr ""
-#: config/tc-mcore.c:849
+#: config/tc-mcore.c:996
#, c-format
msgid "unknown opcode \"%s\""
msgstr ""
-#: config/tc-mcore.c:892
+#: config/tc-mcore.c:1039
msgid "invalid register: r15 illegal"
msgstr ""
-#: config/tc-mcore.c:951 config/tc-mcore.c:990 config/tc-mcore.c:1009
-#: config/tc-mcore.c:1028 config/tc-mcore.c:1055 config/tc-mcore.c:1084
-#: config/tc-mcore.c:1121 config/tc-mcore.c:1156 config/tc-mcore.c:1175
-#: config/tc-mcore.c:1194 config/tc-mcore.c:1226 config/tc-mcore.c:1248
-#: config/tc-mcore.c:1304 config/tc-mcore.c:1358 config/tc-mcore.c:1393
-#: config/tc-mcore.c:1447 config/tc-mcore.c:1469 config/tc-mcore.c:1492
+#: config/tc-mcore.c:1087 config/tc-mcore.c:1663
+msgid "M340 specific opcode used when assembling for M210"
+msgstr ""
+
+#: config/tc-mcore.c:1105 config/tc-mcore.c:1144 config/tc-mcore.c:1163
+#: config/tc-mcore.c:1182 config/tc-mcore.c:1209 config/tc-mcore.c:1238
+#: config/tc-mcore.c:1275 config/tc-mcore.c:1310 config/tc-mcore.c:1329
+#: config/tc-mcore.c:1348 config/tc-mcore.c:1380 config/tc-mcore.c:1405
+#: config/tc-mcore.c:1462 config/tc-mcore.c:1516 config/tc-mcore.c:1552
+#: config/tc-mcore.c:1610 config/tc-mcore.c:1632 config/tc-mcore.c:1655
msgid "second operand missing"
msgstr ""
-#: config/tc-mcore.c:966
+#: config/tc-mcore.c:1120
msgid "destination register must be r1"
msgstr ""
-#: config/tc-mcore.c:987
+#: config/tc-mcore.c:1141
msgid "source register must be r1"
msgstr ""
-#: config/tc-mcore.c:1050 config/tc-mcore.c:1107
+#: config/tc-mcore.c:1204 config/tc-mcore.c:1261
msgid "immediate is not a power of two"
msgstr ""
-#: config/tc-mcore.c:1078
+#: config/tc-mcore.c:1232
msgid "translating bgeni to movi"
msgstr ""
-#: config/tc-mcore.c:1115
+#: config/tc-mcore.c:1269
msgid "translating mgeni to movi"
msgstr ""
-#: config/tc-mcore.c:1147
+#: config/tc-mcore.c:1301
msgid "translating bmaski to movi"
msgstr ""
-#: config/tc-mcore.c:1221
+#: config/tc-mcore.c:1375
#, c-format
msgid "displacement too large (%d)"
msgstr ""
-#: config/tc-mcore.c:1235
+#: config/tc-mcore.c:1389
msgid "Invalid register: r0 and r15 illegal"
msgstr ""
-#: config/tc-mcore.c:1262
+#: config/tc-mcore.c:1420
msgid "bad starting register: r0 and r15 invalid"
msgstr ""
-#: config/tc-mcore.c:1275
+#: config/tc-mcore.c:1433
msgid "ending register must be r15"
msgstr ""
-#: config/tc-mcore.c:1295
+#: config/tc-mcore.c:1453
msgid "bad base register: must be r0"
msgstr ""
-#: config/tc-mcore.c:1313
+#: config/tc-mcore.c:1471
msgid "first register must be r4"
msgstr ""
-#: config/tc-mcore.c:1324
+#: config/tc-mcore.c:1482
msgid "last register must be r7"
msgstr ""
-#: config/tc-mcore.c:1361
+#: config/tc-mcore.c:1519
msgid "reg-reg expected"
msgstr ""
-#: config/tc-mcore.c:1466
+#: config/tc-mcore.c:1629
msgid "second operand must be 1"
msgstr ""
-#: config/tc-mcore.c:1487
+#: config/tc-mcore.c:1650
msgid "zero used as immediate value"
msgstr ""
-#: config/tc-mcore.c:1498
+#: config/tc-mcore.c:1677
+msgid "duplicated psr bit specifier"
+msgstr ""
+
+#: config/tc-mcore.c:1683
+msgid "`af' must appear alone"
+msgstr ""
+
+#: config/tc-mcore.c:1690
#, c-format
msgid "unimplemented opcode \"%s\""
msgstr ""
-#: config/tc-mcore.c:1568 config/tc-w65.c:856
+#: config/tc-mcore.c:1699
+#, c-format
+msgid "ignoring operands: %s "
+msgstr ""
+
+#: config/tc-mcore.c:1768 config/tc-w65.c:856
msgid "Bad call to MD_NTOF()"
msgstr ""
-#: config/tc-mcore.c:1631
+#: config/tc-mcore.c:1841
+#, c-format
+msgid "unrecognised cpu type '%s'"
+msgstr ""
+
+#: config/tc-mcore.c:1860
msgid ""
"MCORE specific options:\n"
" -{no-}jsri2bsr\t {dis}able jsri to bsr transformation (def: dis)\n"
-" -{no-}sifilter\t {dis}able silicon filter behavior (def: dis)"
+" -{no-}sifilter\t {dis}able silicon filter behavior (def: dis)\n"
+" -cpu=[210|340] select CPU type\n"
+" -EB assemble for a big endian system (default)\n"
+" -EL assemble for a little endian system\n"
msgstr ""
-#: config/tc-mcore.c:1647
+#: config/tc-mcore.c:1879
msgid "failed sanity check: short_jump"
msgstr ""
-#: config/tc-mcore.c:1658
+#: config/tc-mcore.c:1890
msgid "failed sanity check: long_jump"
msgstr ""
-#: config/tc-mcore.c:1685
+#: config/tc-mcore.c:1917
#, c-format
msgid "odd displacement at %x"
msgstr ""
-#: config/tc-mcore.c:1839
+#: config/tc-mcore.c:2105
msgid "unknown"
msgstr ""
-#: config/tc-mcore.c:1844 config/tc-ns32k.c:2281
-msgid "<unknown>"
-msgstr ""
-
-#: config/tc-mcore.c:1870
+#: config/tc-mcore.c:2136
#, c-format
msgid "odd distance branch (0x%x bytes)"
msgstr ""
-#: config/tc-mcore.c:1874
+#: config/tc-mcore.c:2140
#, c-format
msgid "pcrel for branch to %s too far (0x%x)"
msgstr ""
-#: config/tc-mcore.c:1885
+#: config/tc-mcore.c:2159
#, c-format
msgid "pcrel for lrw/jmpi/jsri to %s too far (0x%x)"
msgstr ""
-#: config/tc-mcore.c:1894
+#: config/tc-mcore.c:2170
#, c-format
msgid "pcrel for loopt too far (0x%x)"
msgstr ""
-#: config/tc-mcore.c:2112
+#: config/tc-mcore.c:2402
#, c-format
msgid "Can not do %d byte %srelocation"
msgstr ""
-#: config/tc-mcore.c:2114
+#: config/tc-mcore.c:2404
msgid "pc-relative"
msgstr ""
-#: config/tc-mips.c:960
+#: config/tc-mips.c:860
+msgid "-G not supported in this configuration."
+msgstr ""
+
+#: config/tc-mips.c:1005
msgid "trap exception not supported at ISA 1"
msgstr ""
-#: config/tc-mips.c:1000
+#: config/tc-mips.c:1046
msgid "Could not set architecture and machine"
msgstr ""
-#: config/tc-mips.c:1039
+#: config/tc-mips.c:1085
#, c-format
msgid "internal: can't hash `%s': %s"
msgstr ""
-#: config/tc-mips.c:1047
+#: config/tc-mips.c:1093
#, c-format
msgid "internal error: bad mips16 opcode: %s %s\n"
msgstr ""
-#: config/tc-mips.c:1216
+#: config/tc-mips.c:1262
#, c-format
msgid "returned from mips_ip(%s) insn_opcode = 0x%x\n"
msgstr ""
-#: config/tc-mips.c:1739 config/tc-mips.c:11279
+#: config/tc-mips.c:1816 config/tc-mips.c:11354
msgid "extended instruction in delay slot"
msgstr ""
-#: config/tc-mips.c:1761 config/tc-mips.c:1768
+#: config/tc-mips.c:1838 config/tc-mips.c:1845
#, c-format
msgid "jump to misaligned address (0x%lx)"
msgstr ""
-#: config/tc-mips.c:2419 config/tc-mips.c:2782
+#: config/tc-mips.c:2495 config/tc-mips.c:2838
msgid "Macro instruction expanded into multiple instructions"
msgstr ""
-#: config/tc-mips.c:2835
+#: config/tc-mips.c:2891
msgid "unsupported large constant"
msgstr ""
-#: config/tc-mips.c:2837
+#: config/tc-mips.c:2893
#, c-format
msgid "Instruction %s requires absolute expression"
msgstr ""
-#: config/tc-mips.c:2983
+#: config/tc-mips.c:3039
msgid "Number larger than 32 bits"
msgstr ""
-#: config/tc-mips.c:3004
+#: config/tc-mips.c:3060
msgid "Number larger than 64 bits"
msgstr ""
-#: config/tc-mips.c:3270 config/tc-mips.c:3342 config/tc-mips.c:5021
-#: config/tc-mips.c:5072 config/tc-mips.c:5608 config/tc-mips.c:5671
+#: config/tc-mips.c:3326 config/tc-mips.c:3398 config/tc-mips.c:5077
+#: config/tc-mips.c:5128 config/tc-mips.c:5664 config/tc-mips.c:5727
msgid "PIC code offset overflow (max 16 signed bits)"
msgstr ""
-#: config/tc-mips.c:3581
+#: config/tc-mips.c:3637
#, c-format
msgid "Branch %s is always false (nop)"
msgstr ""
-#: config/tc-mips.c:3586
+#: config/tc-mips.c:3642
#, c-format
msgid "Branch likely %s is always false"
msgstr ""
-#: config/tc-mips.c:3593 config/tc-mips.c:3667 config/tc-mips.c:3770
-#: config/tc-mips.c:3825 config/tc-mips.c:6707 config/tc-mips.c:6716
-#: config/tc-mips.c:6724 config/tc-mips.c:6833
+#: config/tc-mips.c:3649 config/tc-mips.c:3723 config/tc-mips.c:3826
+#: config/tc-mips.c:3881 config/tc-mips.c:6764 config/tc-mips.c:6773
+#: config/tc-mips.c:6781 config/tc-mips.c:6890
msgid "Unsupported large constant"
msgstr ""
#. result is always true
-#: config/tc-mips.c:3629
+#: config/tc-mips.c:3685
#, c-format
msgid "Branch %s is always true"
msgstr ""
-#: config/tc-mips.c:3901 config/tc-mips.c:4008
+#: config/tc-mips.c:3957 config/tc-mips.c:4064
msgid "Divide by zero."
msgstr ""
-#: config/tc-mips.c:4592
+#: config/tc-mips.c:4648
msgid "MIPS PIC call to register other than $25"
msgstr ""
-#: config/tc-mips.c:4597 config/tc-mips.c:4709
+#: config/tc-mips.c:4653 config/tc-mips.c:4765
msgid "No .cprestore pseudo-op used in PIC code"
msgstr ""
-#: config/tc-mips.c:4782 config/tc-mips.c:4871 config/tc-mips.c:5359
-#: config/tc-mips.c:5400 config/tc-mips.c:5418 config/tc-mips.c:6046
-#: config/tc-mips.c:7054
+#: config/tc-mips.c:4838 config/tc-mips.c:4927 config/tc-mips.c:5415
+#: config/tc-mips.c:5456 config/tc-mips.c:5474 config/tc-mips.c:6103
msgid "opcode not supported on this processor"
msgstr ""
-#: config/tc-mips.c:5877 config/tc-mips.c:6601
+#: config/tc-mips.c:5934 config/tc-mips.c:6658
msgid "Macro used $at after \".set noat\""
msgstr ""
-#: config/tc-mips.c:6017 config/tc-mips.c:6035
+#: config/tc-mips.c:6074 config/tc-mips.c:6092
msgid "rotate count too large"
msgstr ""
-#: config/tc-mips.c:6086
+#: config/tc-mips.c:6143
#, c-format
msgid "Instruction %s: result is always false"
msgstr ""
-#: config/tc-mips.c:6255
+#: config/tc-mips.c:6312
#, c-format
msgid "Instruction %s: result is always true"
msgstr ""
-#: config/tc-mips.c:6394 config/tc-mips.c:6421 config/tc-mips.c:6493
-#: config/tc-mips.c:6518
+#: config/tc-mips.c:6451 config/tc-mips.c:6478 config/tc-mips.c:6550
+#: config/tc-mips.c:6575
msgid "operand overflow"
msgstr ""
#. FIXME: Check if this is one of the itbl macros, since they
#. are added dynamically.
-#: config/tc-mips.c:6597
+#: config/tc-mips.c:6654
#, c-format
msgid "Macro %s not implemented yet"
msgstr ""
-#: config/tc-mips.c:6867
+#: config/tc-mips.c:6924
#, c-format
msgid "internal: bad mips opcode (mask error): %s %s"
msgstr ""
-#: config/tc-mips.c:6919
+#: config/tc-mips.c:6976
#, c-format
msgid "internal: bad mips opcode (unknown operand type `%c'): %s %s"
msgstr ""
-#: config/tc-mips.c:6926
+#: config/tc-mips.c:6983
#, c-format
msgid "internal: bad mips opcode (bits 0x%lx undefined): %s %s"
msgstr ""
-#: config/tc-mips.c:7059
+#: config/tc-mips.c:7091
#, c-format
-msgid "opcode requires -mips%d or greater"
+msgid "opcode not supported on this processor: %d (MIPS%d)"
msgstr ""
-#: config/tc-mips.c:7127
+#: config/tc-mips.c:7161
#, c-format
msgid "Improper shift amount (%ld)"
msgstr ""
-#: config/tc-mips.c:7154 config/tc-mips.c:8272 config/tc-mips.c:8387
+#: config/tc-mips.c:7188 config/tc-mips.c:8305 config/tc-mips.c:8420
#, c-format
msgid "Invalid value for `%s' (%lu)"
msgstr ""
-#: config/tc-mips.c:7172
+#: config/tc-mips.c:7206
#, c-format
msgid "Illegal break code (%ld)"
msgstr ""
-#: config/tc-mips.c:7186
+#: config/tc-mips.c:7220
#, c-format
msgid "Illegal lower break code (%ld)"
msgstr ""
-#: config/tc-mips.c:7199
+#: config/tc-mips.c:7233
#, c-format
msgid "Illegal syscall code (%ld)"
msgstr ""
-#: config/tc-mips.c:7211
+#: config/tc-mips.c:7245
#, c-format
msgid "Coproccesor code > 25 bits (%ld)"
msgstr ""
-#: config/tc-mips.c:7225
+#: config/tc-mips.c:7259
#, c-format
msgid "Invalidate performance regster (%ld)"
msgstr ""
-#: config/tc-mips.c:7261
+#: config/tc-mips.c:7295
#, c-format
msgid "Invalid register number (%d)"
msgstr ""
-#: config/tc-mips.c:7422
+#: config/tc-mips.c:7455
#, c-format
msgid "Invalid float register number (%d)"
msgstr ""
-#: config/tc-mips.c:7432
+#: config/tc-mips.c:7465
#, c-format
msgid "Float register should be even, was %d"
msgstr ""
-#: config/tc-mips.c:7484 config/tc-mips.c:7716 config/tc-mips.c:7755
+#: config/tc-mips.c:7517 config/tc-mips.c:7749 config/tc-mips.c:7788
msgid "absolute expression required"
msgstr ""
-#: config/tc-mips.c:7545
+#: config/tc-mips.c:7578
#, c-format
msgid "Bad floating point constant: %s"
msgstr ""
-#: config/tc-mips.c:7662
+#: config/tc-mips.c:7695
msgid "Can't use floating point insn in this section"
msgstr ""
-#: config/tc-mips.c:7718
+#: config/tc-mips.c:7751
msgid "16 bit expression not in range 0..65535"
msgstr ""
-#: config/tc-mips.c:7757
+#: config/tc-mips.c:7790
msgid "16 bit expression not in range -32768..32767"
msgstr ""
-#: config/tc-mips.c:7829
+#: config/tc-mips.c:7862
msgid "lui expression not in range 0..65535"
msgstr ""
-#: config/tc-mips.c:7853
+#: config/tc-mips.c:7886
#, c-format
msgid "invalid condition code register $fcc%d"
msgstr ""
-#: config/tc-mips.c:7861
+#: config/tc-mips.c:7894
#, c-format
msgid "bad char = '%c'\n"
msgstr ""
-#: config/tc-mips.c:7874 config/tc-mips.c:8412
+#: config/tc-mips.c:7907 config/tc-mips.c:8445
msgid "illegal operands"
msgstr ""
-#: config/tc-mips.c:7941
+#: config/tc-mips.c:7974
msgid "unrecognized opcode"
msgstr ""
-#: config/tc-mips.c:8050
+#: config/tc-mips.c:8083
#, c-format
msgid "invalid register number (%d)"
msgstr ""
-#: config/tc-mips.c:8131
+#: config/tc-mips.c:8164
msgid "used $at without \".set noat\""
msgstr ""
-#: config/tc-mips.c:8306
+#: config/tc-mips.c:8339
msgid "can't parse register list"
msgstr ""
-#: config/tc-mips.c:8340 config/tc-mips.c:8370
+#: config/tc-mips.c:8373 config/tc-mips.c:8403
msgid "invalid register list"
msgstr ""
-#: config/tc-mips.c:8537
+#: config/tc-mips.c:8570
msgid "extended operand requested but not required"
msgstr ""
-#: config/tc-mips.c:8539
+#: config/tc-mips.c:8572
msgid "invalid unextended operand value"
msgstr ""
-#: config/tc-mips.c:8567
+#: config/tc-mips.c:8600
msgid "operand value out of range for instruction"
msgstr ""
-#: config/tc-mips.c:9008
+#: config/tc-mips.c:9051
#, c-format
msgid "ignoring invalid leading 'v' in -mcpu=%s switch"
msgstr ""
-#: config/tc-mips.c:9014
+#: config/tc-mips.c:9057
#, c-format
msgid "invalid architecture -mcpu=%s"
msgstr ""
-#: config/tc-mips.c:9064
+#: config/tc-mips.c:9107
msgid "-G may not be used with embedded PIC code"
msgstr ""
-#: config/tc-mips.c:9076
+#: config/tc-mips.c:9119
msgid "-call_shared is supported only for ELF format"
msgstr ""
-#: config/tc-mips.c:9082 config/tc-mips.c:10093 config/tc-mips.c:10261
+#: config/tc-mips.c:9125 config/tc-mips.c:10166 config/tc-mips.c:10334
msgid "-G may not be used with SVR4 PIC code"
msgstr ""
-#: config/tc-mips.c:9091
+#: config/tc-mips.c:9134
msgid "-non_shared is supported only for ELF format"
msgstr ""
-#: config/tc-mips.c:9107
+#: config/tc-mips.c:9150
msgid "-G is not supported for this configuration"
msgstr ""
-#: config/tc-mips.c:9112
+#: config/tc-mips.c:9155
msgid "-G may not be used with SVR4 or embedded PIC code"
msgstr ""
-#: config/tc-mips.c:9136
+#: config/tc-mips.c:9179
msgid "No compiled in support for 64 bit object file format"
msgstr ""
-#: config/tc-mips.c:9197
+#: config/tc-mips.c:9269
msgid ""
"MIPS options:\n"
"-membedded-pic\t\tgenerate embedded position independent code\n"
"\t\t\timplicitly with the gp register [default 8]\n"
msgstr ""
-#: config/tc-mips.c:9205
+#: config/tc-mips.c:9277
msgid ""
"-mips1\t\t\tgenerate MIPS ISA I instructions\n"
"-mips2\t\t\tgenerate MIPS ISA II instructions\n"
"-mcpu=CPU\t\tgenerate code for CPU, where CPU is one of:\n"
msgstr ""
-#: config/tc-mips.c:9231
+#: config/tc-mips.c:9303
msgid ""
"-mCPU\t\t\tequivalent to -mcpu=CPU.\n"
"-no-mCPU\t\tdon't generate code specific to CPU.\n"
"\t\t\tFor -mCPU and -no-mCPU, CPU must be one of:\n"
msgstr ""
-#: config/tc-mips.c:9244
+#: config/tc-mips.c:9316
msgid ""
"-mips16\t\t\tgenerate mips16 instructions\n"
"-no-mips16\t\tdo not generate mips16 instructions\n"
msgstr ""
-#: config/tc-mips.c:9247
+#: config/tc-mips.c:9319
msgid ""
"-O0\t\t\tremove unneeded NOPs, do not swap branches\n"
"-O\t\t\tremove unneeded NOPs and swap branches\n"
"--break, --no-trap\tbreak exception on div by 0 and mult overflow\n"
msgstr ""
-#: config/tc-mips.c:9253
+#: config/tc-mips.c:9325
msgid ""
"-KPIC, -call_shared\tgenerate SVR4 position independent code\n"
"-non_shared\t\tdo not generate position independent code\n"
"-64\t\t\tcreate 64 bit object file\n"
msgstr ""
-#: config/tc-mips.c:9310
+#: config/tc-mips.c:9382
#, c-format
msgid "Unsupported reloc size %d"
msgstr ""
-#: config/tc-mips.c:9413
+#: config/tc-mips.c:9485
msgid "Unmatched %%hi reloc"
msgstr ""
-#: config/tc-mips.c:9518
+#: config/tc-mips.c:9590
msgid "Invalid PC relative reloc"
msgstr ""
-#: config/tc-mips.c:9617 config/tc-sparc.c:2617 config/tc-sparc.c:2624
-#: config/tc-sparc.c:2631 config/tc-sparc.c:2638 config/tc-sparc.c:2645
-#: config/tc-sparc.c:2654 config/tc-sparc.c:2665 config/tc-sparc.c:2691
-#: config/tc-sparc.c:2714 write.c:972 write.c:1036
+#: config/tc-mips.c:9690 config/tc-sparc.c:2915 config/tc-sparc.c:2922
+#: config/tc-sparc.c:2929 config/tc-sparc.c:2936 config/tc-sparc.c:2943
+#: config/tc-sparc.c:2952 config/tc-sparc.c:2963 config/tc-sparc.c:2989
+#: config/tc-sparc.c:3017 write.c:971 write.c:1035
msgid "relocation overflow"
msgstr ""
-#: config/tc-mips.c:9633
+#: config/tc-mips.c:9706
#, c-format
msgid "Branch to odd address (%lx)"
msgstr ""
-#: config/tc-mips.c:9788
+#: config/tc-mips.c:9861
#, c-format
msgid "%08lx UNDEFINED\n"
msgstr ""
-#: config/tc-mips.c:9854
+#: config/tc-mips.c:9927
msgid "Alignment negative: 0 assumed."
msgstr ""
-#: config/tc-mips.c:9942
+#: config/tc-mips.c:10015
msgid "No read only data section in this object file format"
msgstr ""
-#: config/tc-mips.c:9965
+#: config/tc-mips.c:10038
msgid "Global pointers not supported; recompile -G 0"
msgstr ""
-#: config/tc-mips.c:10051
+#: config/tc-mips.c:10124
#, c-format
msgid "%s: no such section"
msgstr ""
-#: config/tc-mips.c:10088
+#: config/tc-mips.c:10161
#, c-format
msgid ".option pic%d not supported"
msgstr ""
-#: config/tc-mips.c:10099
+#: config/tc-mips.c:10172
#, c-format
msgid "Unrecognized option \"%s\""
msgstr ""
-#: config/tc-mips.c:10162
+#: config/tc-mips.c:10235
msgid "`noreorder' must be set before `nomacro'"
msgstr ""
-#: config/tc-mips.c:10197
+#: config/tc-mips.c:10270
msgid "unknown ISA level"
msgstr ""
-#: config/tc-mips.c:10220
+#: config/tc-mips.c:10293
msgid ".set pop with no .set push"
msgstr ""
-#: config/tc-mips.c:10244
+#: config/tc-mips.c:10317
#, c-format
msgid "Tried to set unrecognized symbol: %s\n"
msgstr ""
-#: config/tc-mips.c:10294
+#: config/tc-mips.c:10367
msgid ".cpload not in noreorder section"
msgstr ""
-#: config/tc-mips.c:10376
+#: config/tc-mips.c:10449
msgid "Unsupported use of .gpword"
msgstr ""
-#: config/tc-mips.c:10513
+#: config/tc-mips.c:10586
msgid "expected `$'"
msgstr ""
-#: config/tc-mips.c:10521
+#: config/tc-mips.c:10594
msgid "Bad register number"
msgstr ""
-#: config/tc-mips.c:10537
+#: config/tc-mips.c:10610
msgid "Unrecognized register name"
msgstr ""
-#: config/tc-mips.c:10734
+#: config/tc-mips.c:10809
msgid "unsupported PC relative reference to different section"
msgstr ""
-#: config/tc-mips.c:10843
+#: config/tc-mips.c:10918
msgid "unsupported relocation"
msgstr ""
-#: config/tc-mips.c:10926
+#: config/tc-mips.c:11001
msgid "AT used after \".set noat\" or macro used after \".set nomacro\""
msgstr ""
-#: config/tc-mips.c:10989
+#: config/tc-mips.c:11064
msgid "Double check fx_r_type in tc-mips.c:tc_gen_reloc"
msgstr ""
-#: config/tc-mips.c:11470
+#: config/tc-mips.c:11575
msgid "missing `.end' at end of assembly"
msgstr ""
-#: config/tc-mips.c:11485
+#: config/tc-mips.c:11590
msgid "Expected simple number."
msgstr ""
-#: config/tc-mips.c:11511
+#: config/tc-mips.c:11616
#, c-format
msgid " *input_line_pointer == '%c' 0x%02x\n"
msgstr ""
-#: config/tc-mips.c:11513
+#: config/tc-mips.c:11618
msgid "Invalid number"
msgstr ""
-#: config/tc-mips.c:11568
+#: config/tc-mips.c:11673
msgid ".end not in text section"
msgstr ""
-#: config/tc-mips.c:11572
+#: config/tc-mips.c:11677
msgid ".end directive without a preceding .ent directive."
msgstr ""
-#: config/tc-mips.c:11581
+#: config/tc-mips.c:11686
msgid ".end symbol does not match .ent symbol."
msgstr ""
-#: config/tc-mips.c:11584
+#: config/tc-mips.c:11689
msgid ".end directive missing or unknown symbol"
msgstr ""
-#: config/tc-mips.c:11659
+#: config/tc-mips.c:11764
msgid ".ent or .aent not in text section."
msgstr ""
-#: config/tc-mips.c:11662
+#: config/tc-mips.c:11767
msgid "missing `.end'"
msgstr ""
-#: config/tc-mips.c:11695 ecoff.c:3226
+#: config/tc-mips.c:11800 ecoff.c:3227
msgid ".frame outside of .ent"
msgstr ""
-#: config/tc-mips.c:11706 ecoff.c:3237
+#: config/tc-mips.c:11811 ecoff.c:3238
msgid "Bad .frame directive"
msgstr ""
-#: config/tc-mips.c:11736
+#: config/tc-mips.c:11841
msgid ".mask/.fmask outside of .ent"
msgstr ""
-#: config/tc-mips.c:11743
+#: config/tc-mips.c:11848
msgid "Bad .mask/.fmask directive"
msgstr ""
-#: config/tc-mn10200.c:314
+#: config/tc-mn10200.c:313
msgid ""
"MN10200 options:\n"
"none yet\n"
msgstr ""
-#: config/tc-mn10200.c:789 config/tc-mn10300.c:750 config/tc-ppc.c:1613
+#: config/tc-mn10200.c:788 config/tc-mn10300.c:912 config/tc-ppc.c:1614
#: config/tc-v850.c:1691
#, c-format
msgid "Unrecognized opcode: `%s'"
msgstr ""
-#: config/tc-mn10300.c:333
+#: config/tc-mn10300.c:495
msgid ""
"MN10300 options:\n"
"none yet\n"
msgstr ""
-#: config/tc-mn10300.c:768
+#: config/tc-mn10300.c:930
msgid "Invalid opcode/operands"
msgstr ""
-#: config/tc-mn10300.c:1099
+#: config/tc-mn10300.c:1406
msgid "Invalid register specification."
msgstr ""
-#: config/tc-ns32k.c:443
+#: config/tc-ns32k.c:444
msgid "Invalid syntax in PC-relative addressing mode"
msgstr ""
-#: config/tc-ns32k.c:467
+#: config/tc-ns32k.c:468
msgid "Invalid syntax in External addressing mode"
msgstr ""
-#: config/tc-ns32k.c:536
+#: config/tc-ns32k.c:537
msgid "Invalid syntax in Memory Relative addressing mode"
msgstr ""
-#: config/tc-ns32k.c:603
+#: config/tc-ns32k.c:604
msgid "Invalid scaled-indexed mode, use (b,w,d,q)"
msgstr ""
-#: config/tc-ns32k.c:608
+#: config/tc-ns32k.c:609
msgid "Syntax in scaled-indexed mode, use [Rn:m] where n=[0..7] m={b,w,d,q}"
msgstr ""
-#: config/tc-ns32k.c:614
+#: config/tc-ns32k.c:615
msgid "Scaled-indexed addressing mode combined with scaled-index"
msgstr ""
-#: config/tc-ns32k.c:623
+#: config/tc-ns32k.c:624
msgid "Invalid or illegal addressing mode combined with scaled-index"
msgstr ""
-#: config/tc-ns32k.c:730
+#: config/tc-ns32k.c:731
msgid "Premature end of suffix -- Defaulting to d"
msgstr ""
-#: config/tc-ns32k.c:743
+#: config/tc-ns32k.c:744
msgid "Bad suffix after ':' use {b|w|d} Defaulting to d"
msgstr ""
-#: config/tc-ns32k.c:784
+#: config/tc-ns32k.c:785
msgid "Very short instr to option, ie you can't do it on a NULLstr"
msgstr ""
-#: config/tc-ns32k.c:828
+#: config/tc-ns32k.c:829
msgid "No such entry in list. (cpu/mmu register)"
msgstr ""
-#: config/tc-ns32k.c:869
+#: config/tc-ns32k.c:870
msgid "Internal consistency error. check ns32k-opcode.h"
msgstr ""
-#: config/tc-ns32k.c:890
+#: config/tc-ns32k.c:891
msgid "Address of immediate operand"
msgstr ""
-#: config/tc-ns32k.c:891
+#: config/tc-ns32k.c:892
msgid "Invalid immediate write operand."
msgstr ""
-#: config/tc-ns32k.c:1018
+#: config/tc-ns32k.c:1019
msgid "Bad opcode-table-option, check in file ns32k-opcode.h"
msgstr ""
-#: config/tc-ns32k.c:1047
+#: config/tc-ns32k.c:1048
msgid "No such opcode"
msgstr ""
-#: config/tc-ns32k.c:1115
+#: config/tc-ns32k.c:1116
msgid "Bad suffix, defaulting to d"
msgstr ""
-#: config/tc-ns32k.c:1137
+#: config/tc-ns32k.c:1138
msgid "Too many operands passed to instruction"
msgstr ""
#. check error in default
-#: config/tc-ns32k.c:1148
+#: config/tc-ns32k.c:1149
msgid "Wrong numbers of operands in default, check ns32k-opcodes.h"
msgstr ""
-#: config/tc-ns32k.c:1153
+#: config/tc-ns32k.c:1154
msgid "Wrong number of operands"
msgstr ""
-#: config/tc-ns32k.c:1272
+#: config/tc-ns32k.c:1273
msgid "iif convert internal pcrel/binary"
msgstr ""
-#: config/tc-ns32k.c:1288
+#: config/tc-ns32k.c:1289
msgid "Bignum too big for long"
msgstr ""
-#: config/tc-ns32k.c:1363
+#: config/tc-ns32k.c:1364
msgid "iif convert internal pcrel/pointer"
msgstr ""
-#: config/tc-ns32k.c:1368
+#: config/tc-ns32k.c:1369
msgid "Internal logic error in iif.iifP[n].type"
msgstr ""
#. We cant relax this case
-#: config/tc-ns32k.c:1402
+#: config/tc-ns32k.c:1403
msgid "Can't relax difference"
msgstr ""
-#: config/tc-ns32k.c:1451
+#: config/tc-ns32k.c:1452
msgid "Displacement to large for :d"
msgstr ""
-#: config/tc-ns32k.c:1462
+#: config/tc-ns32k.c:1463
msgid "Internal logic error in iif.iifP[].type"
msgstr ""
-#: config/tc-ns32k.c:1517
+#: config/tc-ns32k.c:1518
#, c-format
msgid "Can not do %d byte pc-relative relocation for storage type %d"
msgstr ""
-#: config/tc-ns32k.c:1520
+#: config/tc-ns32k.c:1521
#, c-format
msgid "Can not do %d byte relocation for storage type %d"
msgstr ""
-#: config/tc-ns32k.c:1552
+#: config/tc-ns32k.c:1553
#, c-format
msgid "Can't hash %s: %s"
msgstr ""
-#: config/tc-ns32k.c:1636
+#: config/tc-ns32k.c:1637
msgid "Byte displacement out of range. line number not valid"
msgstr ""
-#: config/tc-ns32k.c:1645
+#: config/tc-ns32k.c:1646
msgid "Word displacement out of range. line number not valid"
msgstr ""
-#: config/tc-ns32k.c:1659
+#: config/tc-ns32k.c:1660
msgid "Double word displacement out of range"
msgstr ""
-#: config/tc-ns32k.c:1679
+#: config/tc-ns32k.c:1680
#, c-format
msgid "Internal logic error. line %s, file \"%s\""
msgstr ""
-#: config/tc-ns32k.c:1727
+#: config/tc-ns32k.c:1728
#, c-format
msgid "Internal logic error. line %s, file \"%s\""
msgstr ""
-#: config/tc-ns32k.c:1838
+#: config/tc-ns32k.c:1839
msgid "Bit field out of range"
msgstr ""
-#: config/tc-ns32k.c:2087
+#: config/tc-ns32k.c:2088
#, c-format
msgid "invalid architecture option -m%s"
msgstr ""
-#: config/tc-ns32k.c:2103
+#: config/tc-ns32k.c:2104
msgid ""
"NS32K options:\n"
"-m32032 | -m32532\tselect variant of NS32K architecture\n"
msgstr ""
-#: config/tc-ns32k.c:2282
+#: config/tc-ns32k.c:2284
#, c-format
msgid "Cannot find relocation type for symbol %s, code %d"
msgstr ""
-#: config/tc-ppc.c:834
+#: config/tc-pj.c:70 config/tc-pj.c:78
+msgid "confusing relocation expressions"
+msgstr ""
+
+#: config/tc-pj.c:172
+msgid "can't have relocation for ipush"
+msgstr ""
+
+#: config/tc-pj.c:282
+#, c-format
+msgid "unknown opcode %s"
+msgstr ""
+
+#: config/tc-pj.c:431
+msgid ""
+"PJ options:\n"
+"-little\t\t\tgenerate little endian code\n"
+"-big\t\t\tgenerate big endian code\n"
+msgstr ""
+
+#: config/tc-pj.c:472 config/tc-sh.c:2570 config/tc-sh.c:2577
+#: config/tc-sh.c:2584 config/tc-sh.c:2591
+msgid "pcrel too far"
+msgstr ""
+
+#: config/tc-pj.c:541 config/tc-sh.c:2663
+msgid "offset out of range"
+msgstr ""
+
+#: config/tc-ppc.c:835
#, c-format
msgid "invalid switch -m%s"
msgstr ""
-#: config/tc-ppc.c:871
+#: config/tc-ppc.c:872
msgid ""
"PowerPC options:\n"
"-u\t\t\tignored\n"
"-mno-regnames\t\tDo not allow symbolic names for registers\n"
msgstr ""
-#: config/tc-ppc.c:886
+#: config/tc-ppc.c:887
msgid ""
"-mrelocatable\t\tsupport for GCC's -mrelocatble option\n"
"-mrelocatable-lib\tsupport for GCC's -mrelocatble-lib option\n"
"-Qy, -Qn\t\tignored\n"
msgstr ""
-#: config/tc-ppc.c:921
+#: config/tc-ppc.c:922
#, c-format
msgid "Unknown default cpu = %s, os = %s"
msgstr ""
-#: config/tc-ppc.c:946
+#: config/tc-ppc.c:947
msgid "Neither Power nor PowerPC opcodes were selected."
msgstr ""
-#: config/tc-ppc.c:994
+#: config/tc-ppc.c:995
#, c-format
msgid "Internal assembler error for instruction %s"
msgstr ""
-#: config/tc-ppc.c:1013
+#: config/tc-ppc.c:1014
#, c-format
msgid "Internal assembler error for macro %s"
msgstr ""
-#: config/tc-ppc.c:1223
+#: config/tc-ppc.c:1224
msgid "identifier+constant@got means identifier@got+constant"
msgstr ""
-#: config/tc-ppc.c:1277
+#: config/tc-ppc.c:1278
#, c-format
msgid "%s relocations do not fit in %d bytes\n"
msgstr ""
-#: config/tc-ppc.c:1377
+#: config/tc-ppc.c:1378
#, c-format
msgid "Length of .lcomm \"%s\" is already %ld. Not changed to %ld."
msgstr ""
-#: config/tc-ppc.c:1459
+#: config/tc-ppc.c:1460
msgid "Relocation cannot be done when using -mrelocatable"
msgstr ""
-#: config/tc-ppc.c:1540
+#: config/tc-ppc.c:1541
#, c-format
msgid "syntax error: invalid toc specifier `%s'"
msgstr ""
-#: config/tc-ppc.c:1554
+#: config/tc-ppc.c:1555
#, c-format
msgid "syntax error: expected `]', found `%c'"
msgstr ""
-#: config/tc-ppc.c:1788
+#: config/tc-ppc.c:1790
msgid "[tocv] symbol is not a toc symbol"
msgstr ""
-#: config/tc-ppc.c:1799
+#: config/tc-ppc.c:1801
msgid "Unimplemented toc32 expression modifier"
msgstr ""
-#: config/tc-ppc.c:1804
+#: config/tc-ppc.c:1806
msgid "Unimplemented toc64 expression modifier"
msgstr ""
-#: config/tc-ppc.c:1808
+#: config/tc-ppc.c:1810
#, c-format
msgid "Unexpected return value [%d] from parse_toc_entry!\n"
msgstr ""
-#: config/tc-ppc.c:1960
+#: config/tc-ppc.c:1963
#, c-format
msgid "syntax error; found `%c' but expected `%c'"
msgstr ""
-#: config/tc-ppc.c:2068
+#: config/tc-ppc.c:2071
msgid "wrong number of operands"
msgstr ""
-#: config/tc-ppc.c:2124
+#: config/tc-ppc.c:2127
msgid "Bad .section directive: want a,w,x,e in string"
msgstr ""
-#: config/tc-ppc.c:2242
+#: config/tc-ppc.c:2241
msgid "missing size"
msgstr ""
-#: config/tc-ppc.c:2251
+#: config/tc-ppc.c:2250
msgid "negative size"
msgstr ""
-#: config/tc-ppc.c:2292
+#: config/tc-ppc.c:2291
msgid "missing real symbol name"
msgstr ""
-#: config/tc-ppc.c:2313
+#: config/tc-ppc.c:2312
msgid "attempt to redefine symbol"
msgstr ""
-#: config/tc-ppc.c:2544
+#: config/tc-ppc.c:2546
msgid "The XCOFF file format does not support arbitrary sections"
msgstr ""
-#: config/tc-ppc.c:2652 config/tc-ppc.c:3164 read.c:2950
+#: config/tc-ppc.c:2654 config/tc-ppc.c:3171 read.c:2976
msgid "missing value"
msgstr ""
-#: config/tc-ppc.c:2670
+#: config/tc-ppc.c:2672
msgid "illegal .stabx expression; zero assumed"
msgstr ""
-#: config/tc-ppc.c:2702
+#: config/tc-ppc.c:2704
msgid "missing class"
msgstr ""
-#: config/tc-ppc.c:2711
+#: config/tc-ppc.c:2713
msgid "missing type"
msgstr ""
-#: config/tc-ppc.c:2772
+#: config/tc-ppc.c:2774
msgid "missing symbol name"
msgstr ""
-#: config/tc-ppc.c:2944
+#: config/tc-ppc.c:2950
msgid "nested .bs blocks"
msgstr ""
-#: config/tc-ppc.c:2977
+#: config/tc-ppc.c:2983
msgid ".es without preceding .bs"
msgstr ""
-#: config/tc-ppc.c:3156
+#: config/tc-ppc.c:3163
msgid "non-constant byte count"
msgstr ""
-#: config/tc-ppc.c:3201
+#: config/tc-ppc.c:3208
msgid ".tc not in .toc section"
msgstr ""
-#: config/tc-ppc.c:3220
+#: config/tc-ppc.c:3227
msgid ".tc with no label"
msgstr ""
-#: config/tc-ppc.c:3295
+#: config/tc-ppc.c:3302
msgid "No previous section to return to. Directive ignored."
msgstr ""
#. Section Contents
#. unknown
-#: config/tc-ppc.c:3714
+#: config/tc-ppc.c:3721
msgid "Unsupported section attribute -- 'a'"
msgstr ""
-#: config/tc-ppc.c:3904
+#: config/tc-ppc.c:3911
msgid "bad symbol suffix"
msgstr ""
-#: config/tc-ppc.c:3995
+#: config/tc-ppc.c:4004
msgid "Unrecognized symbol suffix"
msgstr ""
-#: config/tc-ppc.c:4077
+#: config/tc-ppc.c:4086
msgid "two .function pseudo-ops with no intervening .ef"
msgstr ""
-#: config/tc-ppc.c:4089
+#: config/tc-ppc.c:4099
msgid ".ef with no preceding .function"
msgstr ""
-#: config/tc-ppc.c:4217
+#: config/tc-ppc.c:4227
#, c-format
msgid "warning: symbol %s has no csect"
msgstr ""
-#: config/tc-ppc.c:4513
+#: config/tc-ppc.c:4528
msgid "symbol in .toc does not match any .tc"
msgstr ""
-#: config/tc-ppc.c:4810
+#: config/tc-ppc.c:4826
msgid "unsupported relocation type"
msgstr ""
-#: config/tc-ppc.c:4864
+#: config/tc-ppc.c:4880
#, c-format
msgid "cannot emit PC relative %s relocation against %s"
msgstr ""
-#: config/tc-ppc.c:4869
+#: config/tc-ppc.c:4885
#, c-format
msgid "cannot emit PC relative %s relocation"
msgstr ""
-#: config/tc-ppc.c:4931
+#: config/tc-ppc.c:4947
msgid "must branch to an address a multiple of 4"
msgstr ""
-#: config/tc-ppc.c:4935
+#: config/tc-ppc.c:4951
#, c-format
msgid "@local or @plt branch destination is too far away, %ld bytes"
msgstr ""
-#: config/tc-ppc.c:4959
+#: config/tc-ppc.c:4975
#, c-format
msgid "Gas failure, reloc value %d\n"
msgstr ""
-#: config/tc-sh.c:521
+#: config/tc-sh.c:671
msgid "illegal register after @-"
msgstr ""
-#: config/tc-sh.c:537
+#: config/tc-sh.c:687
msgid "must be @(r0,...)"
msgstr ""
-#: config/tc-sh.c:553
+#: config/tc-sh.c:703
msgid "syntax error in @(r0,...)"
msgstr ""
-#: config/tc-sh.c:585 config/tc-sh.c:590
+#: config/tc-sh.c:735 config/tc-sh.c:740
msgid "syntax error in @(disp,[Rn, gbr, pc])"
msgstr ""
-#: config/tc-sh.c:595
+#: config/tc-sh.c:745
msgid "expecting )"
msgstr ""
-#: config/tc-sh.c:604
+#: config/tc-sh.c:754
msgid "illegal register after @"
msgstr ""
-#: config/tc-sh.c:1228
+#: config/tc-sh.c:1256
+#, c-format
+msgid "Invalid register: 'r%d'"
+msgstr ""
+
+#: config/tc-sh.c:1392
+msgid "insn can't be combined with parallel processing insn"
+msgstr ""
+
+#: config/tc-sh.c:1399 config/tc-sh.c:1410
+msgid "multiple movx specifications"
+msgstr ""
+
+#: config/tc-sh.c:1404 config/tc-sh.c:1431
+msgid "multiple movy specifications"
+msgstr ""
+
+#: config/tc-sh.c:1412
+msgid "invalid movx address register"
+msgstr ""
+
+#: config/tc-sh.c:1418 config/tc-sh.c:1423
+msgid "invalid movx dsp register"
+msgstr ""
+
+#: config/tc-sh.c:1440 config/tc-sh.c:1445
+msgid "invalid movy dsp register"
+msgstr ""
+
+#: config/tc-sh.c:1449
+msgid "invalid movy address register"
+msgstr ""
+
+#: config/tc-sh.c:1455
+msgid "dsp immediate shift value not constant"
+msgstr ""
+
+#: config/tc-sh.c:1462 config/tc-sh.c:1475
+msgid "multiple parallel processing specifications"
+msgstr ""
+
+#: config/tc-sh.c:1468
+msgid "multiple condition specifications"
+msgstr ""
+
+#: config/tc-sh.c:1484
+msgid "insn cannot be combined with pmuls"
+msgstr ""
+
+#: config/tc-sh.c:1501
+msgid "bad padd / psub pmuls output operand"
+msgstr ""
+
+#: config/tc-sh.c:1511
+msgid "condition not followed by conditionalizable insn"
+msgstr ""
+
+#: config/tc-sh.c:1521
+msgid "unrecognized characters at end of parallel processing insn"
+msgstr ""
+
+#: config/tc-sh.c:1631
+#, c-format
+msgid "excess operands: '%s'"
+msgstr ""
+
+#: config/tc-sh.c:1777
msgid ".uses pseudo-op seen when not relaxing"
msgstr ""
-#: config/tc-sh.c:1234
+#: config/tc-sh.c:1783
msgid "bad .uses format"
msgstr ""
-#: config/tc-sh.c:1289
+#: config/tc-sh.c:1844
msgid ""
"SH options:\n"
"-little\t\t\tgenerate little endian code\n"
"-small\t\t\talign sections to 4 byte boundaries, not 16\n"
msgstr ""
-#: config/tc-sh.c:1299 config/tc-w65.c:883
+#: config/tc-sh.c:1854 config/tc-w65.c:883
msgid "call to tc_Nout_fix_to_chars \n"
msgstr ""
-#: config/tc-sh.c:1385
+#: config/tc-sh.c:1940
msgid ".uses does not refer to a local symbol in the same section"
msgstr ""
-#: config/tc-sh.c:1404
+#: config/tc-sh.c:1959
msgid "can't find fixup pointed to by .uses"
msgstr ""
-#: config/tc-sh.c:1427
+#: config/tc-sh.c:1982
msgid ".uses target does not refer to a local symbol in the same section"
msgstr ""
-#: config/tc-sh.c:1524
+#: config/tc-sh.c:2079
#, c-format
msgid "at 0x%lx, displacement overflows 12-bit field"
msgstr ""
-#: config/tc-sh.c:1527
+#: config/tc-sh.c:2082
#, c-format
msgid "at 0x%lx, displacement to defined symbol %s overflows 12-bit field"
msgstr ""
-#: config/tc-sh.c:1531
+#: config/tc-sh.c:2086
#, c-format
msgid "at 0x%lx, displacement to undefined symbol %s overflows 12-bit field"
msgstr ""
-#: config/tc-sh.c:1647
+#: config/tc-sh.c:2202
#, c-format
msgid "at 0x%lx, displacement overflows 8-bit field"
msgstr ""
-#: config/tc-sh.c:1650
+#: config/tc-sh.c:2205
#, c-format
msgid "at 0x%lx, displacement to defined symbol %s overflows 8-bit field "
msgstr ""
-#: config/tc-sh.c:1654
+#: config/tc-sh.c:2209
#, c-format
msgid "at 0x%lx, displacement to undefined symbol %s overflows 8-bit field "
msgstr ""
-#: config/tc-sh.c:1707
+#: config/tc-sh.c:2262
#, c-format
msgid "overflow in branch to %s; converted into longer instruction sequence"
msgstr ""
-#: config/tc-sh.c:1782 config/tc-sh.c:1810 config/tc-sparc.c:3436
-#: config/tc-sparc.c:3455
+#: config/tc-sh.c:2337 config/tc-sh.c:2365 config/tc-sparc.c:3892
+#: config/tc-sparc.c:3911
msgid "misaligned data"
msgstr ""
-#: config/tc-sh.c:1988 config/tc-sh.c:1995 config/tc-sh.c:2002
-#: config/tc-sh.c:2009
-msgid "pcrel too far"
-msgstr ""
-
-#: config/tc-sh.c:2073
+#: config/tc-sh.c:2655
msgid "misaligned offset"
msgstr ""
-#: config/tc-sh.c:2081
-msgid "offset out of range"
-msgstr ""
-
-#: config/tc-sparc.c:257
+#: config/tc-sparc.c:268
msgid "Invalid default architecture, broken assembler."
msgstr ""
-#: config/tc-sparc.c:261 config/tc-sparc.c:448
+#: config/tc-sparc.c:272 config/tc-sparc.c:463
msgid "Bad opcode table, broken assembler."
msgstr ""
-#: config/tc-sparc.c:427
+#: config/tc-sparc.c:442
#, c-format
msgid "invalid architecture -xarch=%s"
msgstr ""
-#: config/tc-sparc.c:442
+#: config/tc-sparc.c:457
#, c-format
msgid "invalid architecture -A%s"
msgstr ""
-#: config/tc-sparc.c:509
+#: config/tc-sparc.c:524
#, c-format
msgid "No compiled in support for %d bit object file format"
msgstr ""
-#: config/tc-sparc.c:546
+#: config/tc-sparc.c:561
msgid "Unrecognized option following -K"
msgstr ""
-#: config/tc-sparc.c:570
+#: config/tc-sparc.c:589
msgid "SPARC options:\n"
msgstr ""
-#: config/tc-sparc.c:578
+#: config/tc-sparc.c:597
msgid ""
"\n"
"-xarch=v8plus | -xarch=v8plusa\n"
msgstr ""
-#: config/tc-sparc.c:579
+#: config/tc-sparc.c:598
msgid ""
"\t\t\tspecify variant of SPARC architecture\n"
"-bump\t\t\twarn when assembler switches architectures\n"
"--enforce-aligned-data\tforce .long, etc., to be aligned correctly\n"
msgstr ""
-#: config/tc-sparc.c:585
+#: config/tc-sparc.c:604
msgid "-k\t\t\tgenerate PIC\n"
msgstr ""
-#: config/tc-sparc.c:589
+#: config/tc-sparc.c:608
msgid ""
"-32\t\t\tcreate 32 bit object file\n"
"-64\t\t\tcreate 64 bit object file\n"
msgstr ""
-#: config/tc-sparc.c:592
+#: config/tc-sparc.c:611
#, c-format
msgid "\t\t\t[default is %d]\n"
msgstr ""
-#: config/tc-sparc.c:594
+#: config/tc-sparc.c:613
msgid ""
"-TSO\t\t\tuse Total Store Ordering\n"
"-PSO\t\t\tuse Partial Store Ordering\n"
"-RMO\t\t\tuse Relaxed Memory Ordering\n"
msgstr ""
-#: config/tc-sparc.c:598
+#: config/tc-sparc.c:617
#, c-format
msgid "\t\t\t[default is %s]\n"
msgstr ""
-#: config/tc-sparc.c:600
+#: config/tc-sparc.c:619
msgid ""
"-KPIC\t\t\tgenerate PIC\n"
"-V\t\t\tprint assembler version number\n"
"-s\t\t\tignored\n"
msgstr ""
-#: config/tc-sparc.c:608
+#: config/tc-sparc.c:627
msgid ""
"-EL\t\t\tgenerate code for a little endian machine\n"
"-EB\t\t\tgenerate code for a big endian machine\n"
" instructions and little endian data."
msgstr ""
-#: config/tc-sparc.c:856
-msgid "Support for 64-bit arithmetic not compiled in."
+#: config/tc-sparc.c:744
+#, c-format
+msgid "Internal error: losing opcode: `%s' \"%s\"\n"
+msgstr ""
+
+#: config/tc-sparc.c:762
+#, c-format
+msgid "Internal error: can't find opcode `%s' for `%s'\n"
msgstr ""
#: config/tc-sparc.c:911
-msgid "FP branch in delay slot"
+msgid "Support for 64-bit arithmetic not compiled in."
msgstr ""
-#: config/tc-sparc.c:927
-msgid "FP branch preceded by FP instruction; NOP inserted"
+#: config/tc-sparc.c:957
+msgid "set: number not in 0..4294967295 range"
msgstr ""
-#: config/tc-sparc.c:947
-msgid "set: used with negative number"
+#: config/tc-sparc.c:964
+msgid "set: number not in -2147483648..4294967295 range"
msgstr ""
-#: config/tc-sparc.c:949
-msgid "set: number larger than 4294967295"
+#: config/tc-sparc.c:1024
+msgid "setsw: number not in -2147483648..4294967295 range"
msgstr ""
-#: config/tc-sparc.c:1000
+#: config/tc-sparc.c:1072
msgid "setx: temporary register same as destination register"
msgstr ""
-#: config/tc-sparc.c:1145
+#: config/tc-sparc.c:1142
+msgid "setx: illegal temporary register g0"
+msgstr ""
+
+#: config/tc-sparc.c:1239
+msgid "FP branch in delay slot"
+msgstr ""
+
+#: config/tc-sparc.c:1255
+msgid "FP branch preceded by FP instruction; NOP inserted"
+msgstr ""
+
+#: config/tc-sparc.c:1295
msgid "failed special case insn sanity check"
msgstr ""
-#: config/tc-sparc.c:1235
+#: config/tc-sparc.c:1386
msgid ": invalid membar mask name"
msgstr ""
-#: config/tc-sparc.c:1249
+#: config/tc-sparc.c:1400
msgid ": invalid membar mask expression"
msgstr ""
-#: config/tc-sparc.c:1254
+#: config/tc-sparc.c:1405
msgid ": invalid membar mask number"
msgstr ""
-#: config/tc-sparc.c:1272
+#: config/tc-sparc.c:1423
msgid ": invalid prefetch function name"
msgstr ""
-#: config/tc-sparc.c:1280
+#: config/tc-sparc.c:1431
msgid ": invalid prefetch function expression"
msgstr ""
-#: config/tc-sparc.c:1285
+#: config/tc-sparc.c:1436
msgid ": invalid prefetch function number"
msgstr ""
-#: config/tc-sparc.c:1313 config/tc-sparc.c:1325
+#: config/tc-sparc.c:1464 config/tc-sparc.c:1476
msgid ": unrecognizable privileged register"
msgstr ""
-#: config/tc-sparc.c:1349 config/tc-sparc.c:1366
+#: config/tc-sparc.c:1500 config/tc-sparc.c:1517
msgid ": unrecognizable v9a ancillary state register"
msgstr ""
-#: config/tc-sparc.c:1354
+#: config/tc-sparc.c:1505
msgid ": rd on write only ancillary state register"
msgstr ""
-#: config/tc-sparc.c:1390
+#: config/tc-sparc.c:1541
msgid ": asr number must be between 16 and 31"
msgstr ""
-#: config/tc-sparc.c:1398
+#: config/tc-sparc.c:1549
msgid ": asr number must be between 0 and 31"
msgstr ""
-#: config/tc-sparc.c:1408
+#: config/tc-sparc.c:1559
msgid ": expecting %asrN"
msgstr ""
-#: config/tc-sparc.c:1799
+#: config/tc-sparc.c:1887
+msgid "detected global register use not covered by .register pseudo-op"
+msgstr ""
+
+#: config/tc-sparc.c:1959
msgid ": There are only 64 f registers; [0-63]"
msgstr ""
-#: config/tc-sparc.c:1801 config/tc-sparc.c:1813
+#: config/tc-sparc.c:1961 config/tc-sparc.c:1973
msgid ": There are only 32 f registers; [0-31]"
msgstr ""
-#: config/tc-sparc.c:1982
+#: config/tc-sparc.c:2092 config/tc-sparc.c:2128
+msgid "Illegal operands: %%%s requires arguments in ()"
+msgstr ""
+
+#: config/tc-sparc.c:2140
+msgid ""
+"Illegal operands: Can't do arithmetics other than + and - involving %%%s()"
+msgstr ""
+
+#: config/tc-sparc.c:2249
+msgid "Illegal operands: Can't add non-constant expression to %%%s()"
+msgstr ""
+
+#: config/tc-sparc.c:2259
+msgid ""
+"Illegal operands: Can't do arithmetics involving %%%s() of a relocatable "
+"symbol"
+msgstr ""
+
+#: config/tc-sparc.c:2277
msgid ": PC-relative operand can't be a constant"
msgstr ""
-#: config/tc-sparc.c:2015
+#: config/tc-sparc.c:2310
msgid ": invalid ASI name"
msgstr ""
-#: config/tc-sparc.c:2023
+#: config/tc-sparc.c:2318
msgid ": invalid ASI expression"
msgstr ""
-#: config/tc-sparc.c:2028
+#: config/tc-sparc.c:2323
msgid ": invalid ASI number"
msgstr ""
-#: config/tc-sparc.c:2125
+#: config/tc-sparc.c:2420
msgid "OPF immediate operand out of range (0-0x1ff)"
msgstr ""
-#: config/tc-sparc.c:2130
+#: config/tc-sparc.c:2425
msgid "non-immediate OPF operand, ignored"
msgstr ""
-#: config/tc-sparc.c:2149
+#: config/tc-sparc.c:2444
msgid ": invalid cpreg name"
msgstr ""
-#: config/tc-sparc.c:2178
+#: config/tc-sparc.c:2473
#, c-format
msgid "Illegal operands%s"
msgstr ""
-#: config/tc-sparc.c:2207
+#: config/tc-sparc.c:2502
#, c-format
msgid "architecture bumped from \"%s\" to \"%s\" on \"%s\""
msgstr ""
-#: config/tc-sparc.c:2243
+#: config/tc-sparc.c:2538
#, c-format
msgid "Architecture mismatch on \"%s\"."
msgstr ""
-#: config/tc-sparc.c:2244
+#: config/tc-sparc.c:2539
#, c-format
msgid " (Requires %s; requested architecture is %s.)"
msgstr ""
-#: config/tc-sparc.c:2760
+#: config/tc-sparc.c:3063
#, c-format
msgid "bad or unhandled relocation type: 0x%02x"
msgstr ""
-#: config/tc-sparc.c:3037
+#: config/tc-sparc.c:3365
msgid "bad .reserve segment -- expected BSS segment"
msgstr ""
-#: config/tc-sparc.c:3054
+#: config/tc-sparc.c:3382
msgid "missing alignment"
msgstr ""
-#: config/tc-sparc.c:3065 config/tc-sparc.c:3210
+#: config/tc-sparc.c:3393 config/tc-sparc.c:3538
#, c-format
msgid "alignment too large; assuming %d"
msgstr ""
-#: config/tc-sparc.c:3071 config/tc-sparc.c:3216
+#: config/tc-sparc.c:3399 config/tc-sparc.c:3544
msgid "negative alignment"
msgstr ""
-#: config/tc-sparc.c:3081 config/tc-sparc.c:3239
+#: config/tc-sparc.c:3409 config/tc-sparc.c:3567
msgid "alignment not a power of 2"
msgstr ""
-#: config/tc-sparc.c:3196
+#: config/tc-sparc.c:3524
msgid "Expected comma after common length"
msgstr ""
+#: config/tc-sparc.c:3759 config/tc-sparc.c:3769
+msgid "register syntax is .register %%g[2367],{#scratch|symbolname|#ignore}"
+msgstr ""
+
+#: config/tc-sparc.c:3787
+msgid "redefinition of global register"
+msgstr ""
+
+#: config/tc-sparc.c:3798
+#, c-format
+msgid "Register symbol %s already defined."
+msgstr ""
+
#: config/tc-tahoe.c:387
msgid "The -a option doesn't exist. (Despite what the man page says!"
msgstr ""
msgid "Can't close `%s'"
msgstr ""
-#: ecoff.c:1576
+#: ecoff.c:1577
#, c-format
msgid "String too big (%lu bytes)"
msgstr ""
-#: ecoff.c:1602
+#: ecoff.c:1603
#, c-format
msgid "Inserting \"%s\" into string hash table: %s"
msgstr ""
-#: ecoff.c:1634 ecoff.c:1827 ecoff.c:1853 ecoff.c:1885 ecoff.c:2041
-#: ecoff.c:2155
+#: ecoff.c:1635 ecoff.c:1828 ecoff.c:1854 ecoff.c:1886 ecoff.c:2042
+#: ecoff.c:2156
msgid "no current file pointer"
msgstr ""
-#: ecoff.c:1721
+#: ecoff.c:1722
msgid "too many st_End's"
msgstr ""
-#: ecoff.c:2067
+#: ecoff.c:2068
#, c-format
msgid "Inserting \"%s\" into tag hash table: %s"
msgstr ""
-#: ecoff.c:2233
+#: ecoff.c:2234
msgid "fake .file after real one"
msgstr ""
-#: ecoff.c:2321
+#: ecoff.c:2322
msgid "Filename goes over one page boundary."
msgstr ""
-#: ecoff.c:2456
+#: ecoff.c:2457
msgid ".begin directive without a preceding .file directive"
msgstr ""
-#: ecoff.c:2463
+#: ecoff.c:2464
msgid ".begin directive without a preceding .ent directive"
msgstr ""
-#: ecoff.c:2495
+#: ecoff.c:2496
msgid ".bend directive without a preceding .file directive"
msgstr ""
-#: ecoff.c:2502
+#: ecoff.c:2503
msgid ".bend directive without a preceding .ent directive"
msgstr ""
-#: ecoff.c:2515
+#: ecoff.c:2516
msgid ".bend directive names unknown symbol"
msgstr ""
-#: ecoff.c:2559
+#: ecoff.c:2560
msgid ".def pseudo-op used inside of .def/.endef; ignored"
msgstr ""
-#: ecoff.c:2561
+#: ecoff.c:2562
msgid "Empty symbol name in .def; ignored"
msgstr ""
-#: ecoff.c:2599
+#: ecoff.c:2600
msgid ".dim pseudo-op used outside of .def/.endef; ignored"
msgstr ""
-#: ecoff.c:2614
+#: ecoff.c:2615
msgid "Badly formed .dim directive"
msgstr ""
-#: ecoff.c:2627
+#: ecoff.c:2628
msgid "Too many .dim entries"
msgstr ""
-#: ecoff.c:2648
+#: ecoff.c:2649
msgid ".scl pseudo-op used outside of .def/.endef; ignored"
msgstr ""
-#: ecoff.c:2674
+#: ecoff.c:2675
msgid ".size pseudo-op used outside of .def/.endef; ignored"
msgstr ""
-#: ecoff.c:2689
+#: ecoff.c:2690
msgid "Badly formed .size directive"
msgstr ""
-#: ecoff.c:2702
+#: ecoff.c:2703
msgid "Too many .size entries"
msgstr ""
-#: ecoff.c:2725
+#: ecoff.c:2726
msgid ".type pseudo-op used outside of .def/.endef; ignored"
msgstr ""
#. FIXME: We could handle this by setting the continued bit.
#. There would still be a limit: the .type argument can not
#. be infinite.
-#: ecoff.c:2743
+#: ecoff.c:2744
#, c-format
msgid "The type of %s is too complex; it will be simplified"
msgstr ""
-#: ecoff.c:2754
+#: ecoff.c:2755
msgid "Unrecognized .type argument"
msgstr ""
-#: ecoff.c:2793
+#: ecoff.c:2794
msgid ".tag pseudo-op used outside of .def/.endef; ignored"
msgstr ""
-#: ecoff.c:2820
+#: ecoff.c:2821
msgid ".val pseudo-op used outside of .def/.endef; ignored"
msgstr ""
-#: ecoff.c:2828
+#: ecoff.c:2829
msgid ".val expression is too copmlex"
msgstr ""
-#: ecoff.c:2859
+#: ecoff.c:2860
msgid ".endef pseudo-op used before .def; ignored"
msgstr ""
-#: ecoff.c:2885
+#: ecoff.c:2886
msgid "Bad COFF debugging info"
msgstr ""
-#: ecoff.c:2934
+#: ecoff.c:2935
#, c-format
msgid "No tag specified for %s"
msgstr ""
-#: ecoff.c:2966
+#: ecoff.c:2967
msgid "Bad COFF debugging information"
msgstr ""
-#: ecoff.c:3038
+#: ecoff.c:3039
msgid ".end directive without a preceding .file directive"
msgstr ""
-#: ecoff.c:3045
+#: ecoff.c:3046
msgid ".end directive without a preceding .ent directive"
msgstr ""
-#: ecoff.c:3068
+#: ecoff.c:3069
msgid ".end directive names unknown symbol"
msgstr ""
-#: ecoff.c:3097
+#: ecoff.c:3098
msgid "second .ent directive found before .end directive"
msgstr ""
-#: ecoff.c:3172
+#: ecoff.c:3173
msgid "No way to handle .file within .ent/.end section"
msgstr ""
-#: ecoff.c:3197
+#: ecoff.c:3198
msgid ".fmask outside of .ent"
msgstr ""
-#: ecoff.c:3266
+#: ecoff.c:3267
msgid ".mask outside of .ent"
msgstr ""
-#: ecoff.c:3296
+#: ecoff.c:3297
msgid ".loc before .file"
msgstr ""
-#: ecoff.c:3303
-msgid ".loc outside of .text"
-msgstr ""
-
-#: ecoff.c:3422
+#: ecoff.c:3423
#, c-format
msgid "Ignoring attempt to redefine symbol `%s'."
msgstr ""
-#: ecoff.c:3435
+#: ecoff.c:3436
msgid "bad .weakext directive"
msgstr ""
-#: ecoff.c:3504
+#: ecoff.c:3505
#, c-format
msgid ".stab%c is not supported"
msgstr ""
-#: ecoff.c:3514
+#: ecoff.c:3515
#, c-format
msgid ".stab%c: ignoring non-zero other field"
msgstr ""
-#: ecoff.c:3548
+#: ecoff.c:3549
#, c-format
msgid ""
"Line number (%d) for .stab%c directive cannot fit in index field (20 bits)"
msgstr ""
-#: ecoff.c:3584
+#: ecoff.c:3585
#, c-format
msgid "Illegal .stab%c directive, bad character"
msgstr ""
-#: ecoff.c:4046 ecoff.c:4235 ecoff.c:4260
+#: ecoff.c:4047 ecoff.c:4236 ecoff.c:4261
msgid ".begin/.bend in different segments"
msgstr ""
-#: ecoff.c:4761
+#: ecoff.c:4762
msgid "Missing .end or .bend at end of file"
msgstr ""
-#: ecoff.c:5252
+#: ecoff.c:5253
msgid "GP prologue size exceeds field size, using 0 instead"
msgstr ""
#. either not seen or not defined.
#. @@ Should print out the original string instead of
#. the parsed number.
-#: expr.c:581
+#: expr.c:583
#, c-format
msgid "backw. ref to unknown label \"%d:\", 0 assumed."
msgstr ""
-#: expr.c:705
+#: expr.c:707
msgid "Character constant too large"
msgstr ""
-#: expr.c:941
+#: expr.c:946
#, c-format
msgid "expr.c(operand): bad atof_generic return val %d"
msgstr ""
-#: expr.c:1001
+#: expr.c:1006
msgid "Missing ')' assumed"
msgstr ""
-#: expr.c:1011 read.c:3824
+#: expr.c:1017 read.c:3857
msgid "EBCDIC constants are not supported"
msgstr ""
-#: expr.c:1078
+#: expr.c:1087
#, c-format
msgid "Unary operator %c ignored because bad operand follows"
msgstr ""
-#: expr.c:1122 expr.c:1147
+#: expr.c:1133 expr.c:1158
msgid "syntax error in .startof. or .sizeof."
msgstr ""
-#: expr.c:1296
+#: expr.c:1311
msgid "Bad expression"
msgstr ""
-#: expr.c:1644
+#: expr.c:1676
msgid "missing operand; zero assumed"
msgstr ""
-#: expr.c:1677
+#: expr.c:1709
msgid "operation combines symbols in different segments"
msgstr ""
-#: expr.c:1693
+#: expr.c:1725
msgid "left operand is a bignum; integer 0 assumed"
msgstr ""
-#: expr.c:1695
+#: expr.c:1727
msgid "left operand is a float; integer 0 assumed"
msgstr ""
-#: expr.c:1704
+#: expr.c:1736
msgid "right operand is a bignum; integer 0 assumed"
msgstr ""
-#: expr.c:1706
+#: expr.c:1738
msgid "right operand is a float; integer 0 assumed"
msgstr ""
-#: expr.c:1754 symbols.c:1092
+#: expr.c:1786 symbols.c:1109
msgid "division by zero"
msgstr ""
msgid "attempt to allocate data in common section"
msgstr ""
-#: gasp.c:484
+#: gasp.c:485
msgid "redefinition not allowed\n"
msgstr ""
-#: gasp.c:558
+#: gasp.c:559
#, c-format
msgid "the %c operator cannot take non-absolute arguments.\n"
msgstr ""
-#: gasp.c:635
+#: gasp.c:636
msgid "string where expression expected.\n"
msgstr ""
-#: gasp.c:641
+#: gasp.c:642
msgid "can't find primary in expression.\n"
msgstr ""
-#: gasp.c:681
+#: gasp.c:682
msgid "misplaced closing parens.\n"
msgstr ""
-#: gasp.c:718
+#: gasp.c:719
msgid "attempt to divide by zero.\n"
msgstr ""
-#: gasp.c:750
+#: gasp.c:751
msgid "can't add two relocatable expressions\n"
msgstr ""
-#: gasp.c:955
+#: gasp.c:956
msgid "unreasonable nesting.\n"
msgstr ""
-#: gasp.c:1033
+#: gasp.c:1034
msgid "End of file not at start of line.\n"
msgstr ""
-#: gasp.c:1154
+#: gasp.c:1155
#, c-format
msgid "Illegal base character %c.\n"
msgstr ""
-#: gasp.c:1269
+#: gasp.c:1270
#, c-format
msgid "radix is %c must be one of b, q, d or h"
msgstr ""
-#: gasp.c:1305
+#: gasp.c:1306
#, c-format
msgid "size must be one of b, w or l, is %c.\n"
msgstr ""
-#: gasp.c:1413
+#: gasp.c:1414
msgid "datab repeat must be constant.\n"
msgstr ""
-#: gasp.c:1415
+#: gasp.c:1416
msgid "datab data must be absolute.\n"
msgstr ""
-#: gasp.c:1429
+#: gasp.c:1430
msgid "align needs absolute expression.\n"
msgstr ""
-#: gasp.c:1436
+#: gasp.c:1437
msgid ".align needs absolute fill value.\n"
msgstr ""
-#: gasp.c:1444
+#: gasp.c:1445
msgid "alignment must be one of 1, 2 or 4.\n"
msgstr ""
-#: gasp.c:1469
+#: gasp.c:1470
msgid "res needs absolute expression for fill count.\n"
msgstr ""
-#: gasp.c:1549
+#: gasp.c:1550
msgid "form LIN= needs absolute expresssion.\n"
msgstr ""
-#: gasp.c:1552
+#: gasp.c:1553
msgid "COL="
msgstr ""
-#: gasp.c:1555
+#: gasp.c:1556
msgid "form COL= needs absolute expresssion.\n"
msgstr ""
#. Turns the next expression into a string
-#: gasp.c:1597 macro.c:400
+#: gasp.c:1598 macro.c:402
#, c-format
msgid "% operator needs absolute expression"
msgstr ""
-#: gasp.c:1659
+#: gasp.c:1660
msgid "misplaced ( .\n"
msgstr ""
-#: gasp.c:1674
+#: gasp.c:1675
msgid "misplaced ).\n"
msgstr ""
-#: gasp.c:1728
+#: gasp.c:1729
msgid ".instr needs absolute expresson.\n"
msgstr ""
-#: gasp.c:1766
+#: gasp.c:1767
msgid "need absolute position.\n"
msgstr ""
-#: gasp.c:1768
+#: gasp.c:1769
msgid "need absolute length.\n"
msgstr ""
-#: gasp.c:2017
+#: gasp.c:2018
msgid "END missing from end of file.\n"
msgstr ""
-#: gasp.c:2047
+#: gasp.c:2048
msgid ".ASSIGNA needs constant expression argument.\n"
msgstr ""
-#: gasp.c:2051
+#: gasp.c:2052
msgid ".ASSIGNA without label.\n"
msgstr ""
-#: gasp.c:2076
+#: gasp.c:2077
msgid ".ASSIGNS without label.\n"
msgstr ""
-#: gasp.c:2143
+#: gasp.c:2144
#, c-format
msgid "Can't find preprocessor variable %s.\n"
msgstr ""
-#: gasp.c:2208
+#: gasp.c:2209
msgid "Comparison operator must be one of EQ, NE, LT, LE, GT or GE.\n"
msgstr ""
-#: gasp.c:2242
+#: gasp.c:2243
msgid "Comparison operator for strings must be EQ or NE\n"
msgstr ""
-#: gasp.c:2254 gasp.c:2264 gasp.c:2366
+#: gasp.c:2255 gasp.c:2265 gasp.c:2367
msgid "Conditional operator must have absolute operands.\n"
msgstr ""
-#: gasp.c:2259
+#: gasp.c:2260
msgid "String compared against expression.\n"
msgstr ""
-#: gasp.c:2309
+#: gasp.c:2310
msgid "AIF nesting unreasonable.\n"
msgstr ""
-#: gasp.c:2324
+#: gasp.c:2325
msgid "Multiple AELSEs in AIF.\n"
msgstr ""
-#: gasp.c:2340
+#: gasp.c:2341
msgid "AENDI without AIF.\n"
msgstr ""
-#: gasp.c:2363 gasp.c:2445
+#: gasp.c:2364 gasp.c:2446
msgid "IF nesting unreasonable.\n"
msgstr ""
-#: gasp.c:2455
+#: gasp.c:2456
msgid "Bad format for IF or IFNC.\n"
msgstr ""
-#: gasp.c:2475
+#: gasp.c:2476
msgid "AENDR without a AREPEAT.\n"
msgstr ""
-#: gasp.c:2477
+#: gasp.c:2478
msgid "ENDR without a REPT.\n"
msgstr ""
-#: gasp.c:2500
+#: gasp.c:2501
#, c-format
msgid "AWHILE without a AENDW at %d.\n"
msgstr ""
-#: gasp.c:2538
+#: gasp.c:2539
msgid "AENDW without a AENDW.\n"
msgstr ""
-#: gasp.c:2583
+#: gasp.c:2584
msgid "AREPEAT must have absolute operand.\n"
msgstr ""
-#: gasp.c:2589
+#: gasp.c:2590
#, c-format
msgid "AREPEAT without a AENDR at %d.\n"
msgstr ""
-#: gasp.c:2631
+#: gasp.c:2632
msgid ".ENDM without a matching .MACRO.\n"
msgstr ""
-#: gasp.c:2665
+#: gasp.c:2666
msgid "LOCAL outside of MACRO"
msgstr ""
-#: gasp.c:2678
+#: gasp.c:2679
#, c-format
msgid "macro at line %d: %s\n"
msgstr ""
-#: gasp.c:2701
+#: gasp.c:2702
msgid "macro expansion"
msgstr ""
-#: gasp.c:2753
+#: gasp.c:2754
msgid "Character code in string must be absolute expression.\n"
msgstr ""
-#: gasp.c:2758
+#: gasp.c:2759
msgid "Missing > for character code.\n"
msgstr ""
-#: gasp.c:2817
+#: gasp.c:2818
#, c-format
msgid "string for SDATAC longer than 255 characters (%d).\n"
msgstr ""
-#: gasp.c:2845
+#: gasp.c:2846
#, c-format
msgid "illegal character in SDATA line (0x%x).\n"
msgstr ""
-#: gasp.c:2866
+#: gasp.c:2867
msgid "Must have absolute SDATAB repeat count.\n"
msgstr ""
-#: gasp.c:2869
+#: gasp.c:2870
#, c-format
msgid "Must have positive SDATAB repeat count (%d).\n"
msgstr ""
-#: gasp.c:2897
+#: gasp.c:2898
#, c-format
msgid "Unreasonable include depth (%ld).\n"
msgstr ""
-#: gasp.c:2951
+#: gasp.c:2952
#, c-format
msgid "Can't open include file `%s'.\n"
msgstr ""
-#: gasp.c:3025
+#: gasp.c:3026
msgid "Unreasonable expansion (-u turns off check).\n"
msgstr ""
#. This one causes lots of pain when trying to preprocess
#. ordinary code
-#: gasp.c:3246
+#: gasp.c:3247
#, c-format
msgid "Unrecognised pseudo op `%s'.\n"
msgstr ""
-#: gasp.c:3313
+#: gasp.c:3314
msgid "ORG command not allowed.\n"
msgstr ""
-#: gasp.c:3530
+#: gasp.c:3531
msgid "Invalid expression on command line.\n"
msgstr ""
-#: gasp.c:3571
+#: gasp.c:3572
#, c-format
msgid ""
"Usage: %s \n"
" [-p] [--print] print line numbers\n"
msgstr ""
-#: gasp.c:3580
+#: gasp.c:3581
msgid ""
" [-s] [--copysource] copy source through as comments \n"
" [-u] [--unreasonable] allow unreasonable nesting\n"
" [in-file]\n"
msgstr ""
-#: gasp.c:3596
+#: gasp.c:3597
#, c-format
msgid "%s: Gnu Assembler Macro Preprocessor\n"
msgstr ""
#. This output is intended to follow the GNU standards document.
-#: gasp.c:3680
+#: gasp.c:3681
#, c-format
msgid "GNU assembler pre-processor %s\n"
msgstr ""
-#: gasp.c:3681
+#: gasp.c:3682
msgid "Copyright 1996 Free Software Foundation, Inc.\n"
msgstr ""
-#: gasp.c:3703
+#: gasp.c:3704
#, c-format
msgid "%s: Can't open output file `%s'.\n"
msgstr ""
-#: gasp.c:3726
+#: gasp.c:3727
#, c-format
msgid "%s: Can't open input file `%s'.\n"
msgstr ""
-#: gasp.c:3745
+#: gasp.c:3746
#, c-format
msgid "Internal error, aborting at %s line %d"
msgstr ""
-#: gasp.c:3748
+#: gasp.c:3749
msgid ""
"\n"
"Please report this bug.\n"
msgid "Error:"
msgstr ""
-#: listing.c:1140
+#: listing.c:1145
#, c-format
msgid "can't open list file: %s"
msgstr ""
-#: listing.c:1164
+#: listing.c:1169
#, c-format
msgid "error closing list file: %s"
msgstr ""
-#: listing.c:1245
+#: listing.c:1250
msgid "strange paper height, set to no form"
msgstr ""
-#: listing.c:1311
+#: listing.c:1316
msgid "New line in title"
msgstr ""
-#: macro.c:563
+#: macro.c:565
msgid "unexpected end of file in macro definition"
msgstr ""
-#: macro.c:572
+#: macro.c:574
msgid "missing ) after formals"
msgstr ""
-#: macro.c:729
+#: macro.c:731
msgid "missplaced )"
msgstr ""
-#: macro.c:991
+#: macro.c:993
msgid "confusion in formal parameters"
msgstr ""
-#: macro.c:996
+#: macro.c:998
msgid "macro formal argument does not exist"
msgstr ""
-#: macro.c:1011
+#: macro.c:1013
msgid "can't mix positional and keyword arguments"
msgstr ""
-#: macro.c:1019
+#: macro.c:1021
msgid "too many positional arguments"
msgstr ""
-#: macro.c:1194
+#: macro.c:1196
msgid "unexpected end of file in irp or irpc"
msgstr ""
-#: macro.c:1202
+#: macro.c:1204
msgid "missing model parameter"
msgstr ""
msgid "Can't continue"
msgstr ""
-#: read.c:434
+#: read.c:439
#, c-format
msgid "error constructing %s pseudo-op table: %s"
msgstr ""
-#: read.c:802
+#: read.c:804
#, c-format
msgid "Unknown pseudo-op: `%s'"
msgstr ""
-#: read.c:928
+#: read.c:933
#, c-format
msgid "label \"%d$\" redefined"
msgstr ""
-#: read.c:1145
+#: read.c:1150
msgid ".abort detected. Abandoning ship."
msgstr ""
-#: read.c:1250 read.c:2031
+#: read.c:1241 read.c:2024
msgid "Alignment not a power of 2"
msgstr ""
-#: read.c:1258
+#: read.c:1249
#, c-format
msgid "Alignment too large: %u assumed"
msgstr ""
-#: read.c:1290
+#: read.c:1281
msgid "expected fill pattern missing"
msgstr ""
-#: read.c:1487
+#: read.c:1478
#, c-format
msgid "attempt to re-define symbol `%s'"
msgstr ""
#. Some of the back ends can't deal with non-positive line numbers.
#. Besides, it's silly.
-#: read.c:1611
+#: read.c:1602
#, c-format
msgid "Line numbers must be positive; line number %d rejected."
msgstr ""
-#: read.c:1638
+#: read.c:1629
msgid "start address not supported"
msgstr ""
-#: read.c:1648
+#: read.c:1639
msgid ".err encountered"
msgstr ""
-#: read.c:1667 read.c:1669
+#: read.c:1658 read.c:1660
#, c-format
msgid ".fail %ld encountered"
msgstr ""
-#: read.c:1706
+#: read.c:1697
#, c-format
msgid ".fill size clamped to %d."
msgstr ""
-#: read.c:1711
+#: read.c:1702
msgid "Size negative: .fill ignored."
msgstr ""
-#: read.c:1717
+#: read.c:1708
msgid "Repeat < 0, .fill ignored"
msgstr ""
-#: read.c:1873
+#: read.c:1866
#, c-format
msgid "unrecognized .linkonce type `%s'"
msgstr ""
-#: read.c:1886 read.c:1912
+#: read.c:1879 read.c:1905
msgid ".linkonce is not supported for this object file format"
msgstr ""
-#: read.c:1908
+#: read.c:1901
#, c-format
msgid "bfd_set_section_flags: %s"
msgstr ""
-#: read.c:1977
+#: read.c:1970
#, c-format
msgid "error setting flags for \".sbss\": %s"
msgstr ""
-#: read.c:2009
+#: read.c:2002
msgid "Expected comma after size"
msgstr ""
-#: read.c:2017
+#: read.c:2010
msgid "Missing alignment"
msgstr ""
-#: read.c:2154
+#: read.c:2152
msgid "bad expression"
msgstr ""
-#: read.c:2289
+#: read.c:2283
#, c-format
msgid "attempt to redefine pseudo-op `%s' ignored"
msgstr ""
-#: read.c:2353
+#: read.c:2349
#, c-format
msgid "invalid segment \"%s\"; segment \"%s\" assumed"
msgstr ""
-#: read.c:2359
+#: read.c:2355
msgid "ignoring fill value in absolute section"
msgstr ""
-#: read.c:2362
+#: read.c:2358
msgid "only constant offsets supported in absolute section"
msgstr ""
-#: read.c:2394
+#: read.c:2390
msgid "MRI style ORG pseudo-op not supported"
msgstr ""
-#: read.c:2482
+#: read.c:2478
msgid "unrecognized section type"
msgstr ""
-#: read.c:2550
+#: read.c:2546
#, c-format
msgid "unrecognized section type `%s'"
msgstr ""
-#: read.c:2564
+#: read.c:2560
msgid "absolute sections are not supported"
msgstr ""
-#: read.c:2579
+#: read.c:2575
#, c-format
msgid "unrecognized section command `%s'"
msgstr ""
-#: read.c:2654
-msgid "rept without endr"
+#: read.c:2663
+#, c-format
+msgid "%s without %s"
msgstr ""
-#: read.c:2841
+#: read.c:2867
msgid "Unsupported variable size or fill value"
msgstr ""
-#: read.c:2866
+#: read.c:2892
msgid ".space repeat count is zero, ignored"
msgstr ""
-#: read.c:2868
+#: read.c:2894
msgid ".space repeat count is negative, ignored"
msgstr ""
-#: read.c:2897
+#: read.c:2923
msgid "space allocation too complex in absolute section"
msgstr ""
-#: read.c:2902
+#: read.c:2928
msgid "space allocation too complex in common section"
msgstr ""
-#: read.c:2989 read.c:4070
+#: read.c:3015 read.c:4104
#, c-format
msgid "Bad floating literal: %s"
msgstr ""
-#: read.c:3065
+#: read.c:3091
#, c-format
msgid "Rest of line ignored. First ignored character is `%c'."
msgstr ""
-#: read.c:3068
+#: read.c:3094
#, c-format
msgid "Rest of line ignored. First ignored character valued 0x%x."
msgstr ""
-#: read.c:3119
+#: read.c:3145
msgid "illegal expression; zero assumed"
msgstr ""
-#: read.c:3121
+#: read.c:3147
msgid "missing expression; zero assumed"
msgstr ""
-#: read.c:3288
+#: read.c:3320
msgid "rva without symbol"
msgstr ""
-#: read.c:3413
+#: read.c:3445
msgid "attempt to store value in absolute section"
msgstr ""
-#: read.c:3451 read.c:4347
+#: read.c:3483 read.c:4381
msgid "zero assumed for missing expression"
msgstr ""
-#: read.c:3463 read.c:4359
+#: read.c:3495 read.c:4393
msgid "register value used as expression"
msgstr ""
#. Leading bits contain both 0s & 1s.
-#: read.c:3553
+#: read.c:3585
#, c-format
msgid "Value 0x%lx truncated to 0x%lx."
msgstr ""
-#: read.c:3569
+#: read.c:3601
#, c-format
msgid "Bignum truncated to %d bytes"
msgstr ""
-#: read.c:3646
+#: read.c:3678
#, c-format
msgid "unsupported BFD relocation size %u"
msgstr ""
-#: read.c:3735
+#: read.c:3767
msgid "using a bit field width of zero"
msgstr ""
-#: read.c:3743
+#: read.c:3775
#, c-format
msgid "field width \"%s\" too complex for a bitfield"
msgstr ""
-#: read.c:3751
+#: read.c:3783
#, c-format
msgid "field width %lu too big to fit in %d bytes: truncated to %d bits"
msgstr ""
-#: read.c:3772
+#: read.c:3804
#, c-format
msgid "field value \"%s\" too complex for a bitfield"
msgstr ""
-#: read.c:3894
+#: read.c:3928
msgid "Unresolvable or nonpositive repeat count; using 1"
msgstr ""
-#: read.c:3945
+#: read.c:3979
#, c-format
msgid "Unknown floating type type '%c'"
msgstr ""
-#: read.c:3967
+#: read.c:4001
msgid "Floating point constant too large"
msgstr ""
-#: read.c:4092
+#: read.c:4126
msgid "unresolvable or nonpositive repeat count; using 1"
msgstr ""
-#: read.c:4496
+#: read.c:4530
msgid "Expected <nn>"
msgstr ""
#. To be compatible with BSD 4.2 as: give the luser a linefeed!!
-#: read.c:4529 read.c:4612
+#: read.c:4563 read.c:4646
msgid "Unterminated string: Newline inserted."
msgstr ""
-#: read.c:4620
+#: read.c:4654
msgid "Bad escaped character in string, '?' assumed"
msgstr ""
-#: read.c:4646
+#: read.c:4680
msgid "expected address expression; zero assumed"
msgstr ""
-#: read.c:4666
+#: read.c:4700
#, c-format
msgid "symbol \"%s\" undefined; zero assumed"
msgstr ""
-#: read.c:4669
+#: read.c:4703
msgid "some symbol undefined; zero assumed"
msgstr ""
-#: read.c:4687
+#: read.c:4721
msgid "bad or irreducible absolute expression; zero assumed"
msgstr ""
-#: read.c:4725
+#: read.c:4759
msgid "This string may not contain '\\0'"
msgstr ""
-#: read.c:4764
+#: read.c:4798
msgid "Missing string"
msgstr ""
-#: read.c:4995
+#: read.c:5029
msgid "missing .func"
msgstr ""
-#: read.c:5012
+#: read.c:5046
msgid ".endfunc missing for previous .func"
msgstr ""
msgid "Attempt to switch to nonexistent segment \"%s\""
msgstr ""
-#: symbols.c:364 symbols.c:459
+#: symbols.c:365 symbols.c:467
#, c-format
msgid "Symbol %s already defined."
msgstr ""
-#: symbols.c:439
-#, c-format
-msgid "Symbol \"%s\" is already defined as \"%s\"/%d.%d.%ld."
-msgstr ""
-
-#: symbols.c:445
+#: symbols.c:453
#, c-format
-msgid "Symbol \"%s\" is already defined as \"%s\"/%ld."
+msgid "Symbol \"%s\" is already defined as \"%s\"/%s%ld."
msgstr ""
-#: symbols.c:528 symbols.c:535
+#: symbols.c:536 symbols.c:543
#, c-format
msgid "Inserting \"%s\" into symbol table failed: %s"
msgstr ""
-#: symbols.c:880
+#: symbols.c:894
#, c-format
msgid "Symbol definition loop encountered at %s"
msgstr ""
-#: symbols.c:1054 symbols.c:1058
+#: symbols.c:1071 symbols.c:1075
#, c-format
msgid "undefined symbol %s in operation"
msgstr ""
-#: symbols.c:1062
+#: symbols.c:1079
msgid "invalid section for operation"
msgstr ""
-#: symbols.c:1067 symbols.c:1071
+#: symbols.c:1084 symbols.c:1088
#, c-format
msgid "undefined symbol %s in operation setting %s"
msgstr ""
-#: symbols.c:1076
+#: symbols.c:1093
#, c-format
msgid "invalid section for operation setting %s"
msgstr ""
-#: symbols.c:1094
+#: symbols.c:1111
#, c-format
msgid "division by zero when setting %s"
msgstr ""
-#: symbols.c:1166 write.c:1877
+#: symbols.c:1183 write.c:1881
#, c-format
msgid "can't resolve value for symbol \"%s\""
msgstr ""
-#: symbols.c:1536
+#: symbols.c:1556
#, c-format
msgid "\"%d\" (instance number %d of a %s label)"
msgstr ""
-#: symbols.c:1584
+#: symbols.c:1606
#, c-format
msgid "Attempt to get value of unresolved symbol %s"
msgstr ""
msgid "rva not supported"
msgstr ""
-#: write.c:501
+#: write.c:502
#, c-format
msgid "attempt to .org/.space backwards? (%ld)"
msgstr ""
-#: write.c:975
+#: write.c:974
msgid "relocation out of range"
msgstr ""
-#: write.c:978
+#: write.c:977
#, c-format
msgid "%s:%u: bad return from bfd_install_relocation: %x"
msgstr ""
-#: write.c:1023
+#: write.c:1022
msgid "internal error: fixup not contained within frag"
msgstr ""
-#: write.c:1039
+#: write.c:1038
#, c-format
msgid "%s:%u: bad return from bfd_install_relocation"
msgstr ""
-#: write.c:1122 write.c:1146
+#: write.c:1125 write.c:1149
#, c-format
msgid "FATAL: Can't write %s"
msgstr ""
-#: write.c:1177
+#: write.c:1180
msgid "Cannot write to output file."
msgstr ""
-#: write.c:1408
+#: write.c:1412
#, c-format
msgid "%d error%s, %d warning%s, generating bad object file.\n"
msgstr ""
-#: write.c:1415
+#: write.c:1419
#, c-format
msgid "%d error%s, %d warning%s, no object file generated.\n"
msgstr ""
-#: write.c:1814
+#: write.c:1818
#, c-format
msgid "local label %s is not defined"
msgstr ""
-#: write.c:2119
+#: write.c:2123
#, c-format
msgid "alignment padding (%lu bytes) not a multiple of %ld"
msgstr ""
-#: write.c:2225
+#: write.c:2229
#, c-format
msgid ".word %s-%s+%s didn't fit"
msgstr ""
-#. Growth may be negative, but variable part of frag
-#. cannot have fewer than 0 chars. That is, we can't
-#. .org backwards.
-#: write.c:2304
+#: write.c:2309
msgid "attempt to .org backwards ignored"
msgstr ""
-#: write.c:2320
+#: write.c:2332
msgid ".space specifies non-absolute value"
msgstr ""
-#: write.c:2324
+#: write.c:2336
msgid ".space or .fill with negative value, ignored"
msgstr ""
-#: write.c:2575
+#: write.c:2587
#, c-format
msgid ""
"Subtraction of two symbols in different sections \"%s\" {%s section} - "
"\"%s\" {%s section} at file address %s."
msgstr ""
-#: write.c:2750
+#: write.c:2752
#, c-format
msgid "Value of %s too large for field of %d bytes at %s"
msgstr ""
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-07-01 01:36-0400\n"
+"POT-Creation-Date: 2000-02-22 02:24-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
msgid "%s: -c not supported on architecture %s\n"
msgstr ""
-#: corefile.c:432
+#: corefile.c:433
#, c-format
msgid "%s: file `%s' has no symbols\n"
msgstr ""
-#: corefile.c:753
+#: corefile.c:755
#, c-format
msgid "%s: somebody miscounted: ltab.len=%d instead of %ld\n"
msgstr ""
msgid "%s: incompatible with first gmon file\n"
msgstr ""
-#: gmon_io.c:271
+#: gmon_io.c:258
+#, c-format
+msgid "%s: file '%s' does not appear to be in gmon.out format\n"
+msgstr ""
+
+#: gmon_io.c:280
#, c-format
msgid "%s: unexpected EOF after reading %d/%d bins\n"
msgstr ""
-#: gmon_io.c:306
+#: gmon_io.c:315
msgid "time is in ticks, not seconds\n"
msgstr ""
-#: gmon_io.c:312 gmon_io.c:452
+#: gmon_io.c:321 gmon_io.c:461
#, c-format
msgid "%s: don't know how to deal with file format %d\n"
msgstr ""
-#: gmon_io.c:319
+#: gmon_io.c:328
#, c-format
msgid "File `%s' (version %d) contains:\n"
msgstr ""
-#: gmon_io.c:321
+#: gmon_io.c:330
#, c-format
msgid "\t%d histogram record%s\n"
msgstr ""
-#: gmon_io.c:323
+#: gmon_io.c:332
#, c-format
msgid "\t%d call-graph record%s\n"
msgstr ""
-#: gmon_io.c:325
+#: gmon_io.c:334
#, c-format
msgid "\t%d basic-block count record%s\n"
msgstr ""
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NATIVE_LIB_DIRS = @NATIVE_LIB_DIRS@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
STRINGIFY = @STRINGIFY@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
l = @l@
AC_SUBST($1)])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-targets alternative target configurations"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:594: checking host system type" >&5
+echo "configure:605: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:615: checking target system type" >&5
+echo "configure:626: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:633: checking build system type" >&5
+echo "configure:644: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:668: checking for a BSD compatible install" >&5
+echo "configure:679: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:721: checking whether build environment is sane" >&5
+echo "configure:732: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:778: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:789: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:824: checking for working aclocal" >&5
+echo "configure:835: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:837: checking for working autoconf" >&5
+echo "configure:848: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:850: checking for working automake" >&5
+echo "configure:861: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:863: checking for working autoheader" >&5
+echo "configure:874: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:876: checking for working makeinfo" >&5
+echo "configure:887: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:962: checking for $ac_word" >&5
+echo "configure:973: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:992: checking for $ac_word" >&5
+echo "configure:1003: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1022: checking for $ac_word" >&5
+echo "configure:1033: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1073: checking for $ac_word" >&5
+echo "configure:1084: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1105: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1116: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1116 "configure"
+#line 1127 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1147: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1158: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1152: checking whether we are using GNU C" >&5
+echo "configure:1163: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1180: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1191: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1223: checking for ld used by GCC" >&5
+echo "configure:1234: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1247: checking for GNU ld" >&5
+echo "configure:1258: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1250: checking for non-GNU ld" >&5
+echo "configure:1261: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1286: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1296: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1302: checking for BSD-compatible nm" >&5
+echo "configure:1312: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1340: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1407: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1505: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1517: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1543: checking whether ln -s works" >&5
+echo "configure:1348: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1585 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1397 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1607: checking whether the C compiler needs -belf" >&5
+echo "configure:1419: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1612 "configure"
+#line 1424 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1642: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1674: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1709: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1741: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1910: checking for $ac_word" >&5
+echo "configure:1571: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1940: checking for $ac_word" >&5
+echo "configure:1601: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1991: checking for $ac_word" >&5
+echo "configure:1652: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2023: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1684: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2034 "configure"
+#line 1695 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2065: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1726: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2070: checking whether we are using GNU C" >&5
+echo "configure:1731: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2098: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1759: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2141: checking for a BSD compatible install" >&5
+echo "configure:1802: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2196: checking how to run the C preprocessor" >&5
+echo "configure:1857: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2211 "configure"
+#line 1872 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2217: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2228 "configure"
+#line 1889 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2245 "configure"
+#line 1906 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2251: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1912: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2276: checking for POSIXized ISC" >&5
+echo "configure:1937: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2297: checking for ANSI C header files" >&5
+echo "configure:1958: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 1963 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2327 "configure"
+#line 1988 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2345 "configure"
+#line 2006 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2366 "configure"
+#line 2027 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2401: checking for working const" >&5
+echo "configure:2062: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2406 "configure"
+#line 2067 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2455: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2116: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2476: checking for inline" >&5
+echo "configure:2137: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2483 "configure"
+#line 2144 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2151: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2516: checking for off_t" >&5
+echo "configure:2177: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2182 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2549: checking for size_t" >&5
+echo "configure:2210: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2554 "configure"
+#line 2215 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2584: checking for working alloca.h" >&5
+echo "configure:2245: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2589 "configure"
+#line 2250 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2617: checking for alloca" >&5
+echo "configure:2278: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2622 "configure"
+#line 2283 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2682: checking whether alloca needs Cray hooks" >&5
+echo "configure:2343: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2687 "configure"
+#line 2348 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2712: checking for $ac_func" >&5
+echo "configure:2373: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2717 "configure"
+#line 2378 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2767: checking stack direction for C alloca" >&5
+echo "configure:2428: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2775 "configure"
+#line 2436 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2819: checking for $ac_hdr" >&5
+echo "configure:2480: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2824 "configure"
+#line 2485 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2490: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2858: checking for $ac_func" >&5
+echo "configure:2519: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 2524 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2911: checking for working mmap" >&5
+echo "configure:2572: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2919 "configure"
+#line 2580 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3087: checking for $ac_hdr" >&5
+echo "configure:2748: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3092 "configure"
+#line 2753 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_func" >&5
+echo "configure:2788: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3132 "configure"
+#line 2793 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3184: checking for $ac_func" >&5
+echo "configure:2845: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 2850 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3246: checking for LC_MESSAGES" >&5
+echo "configure:2907: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3251 "configure"
+#line 2912 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3279: checking whether NLS is requested" >&5
+echo "configure:2940: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3299: checking whether included gettext is requested" >&5
+echo "configure:2960: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3318: checking for libintl.h" >&5
+echo "configure:2979: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 2984 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3345: checking for gettext in libc" >&5
+echo "configure:3006: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3350 "configure"
+#line 3011 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3373: checking for bindtextdomain in -lintl" >&5
+echo "configure:3034: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3381 "configure"
+#line 3042 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3408: checking for gettext in libintl" >&5
+echo "configure:3069: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3413 "configure"
+#line 3074 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3448: checking for $ac_word" >&5
+echo "configure:3109: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3482: checking for $ac_func" >&5
+echo "configure:3143: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3487 "configure"
+#line 3148 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3537: checking for $ac_word" >&5
+echo "configure:3198: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3573: checking for $ac_word" >&5
+echo "configure:3234: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3605 "configure"
+#line 3266 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3645: checking for $ac_word" >&5
+echo "configure:3306: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3679: checking for $ac_word" >&5
+echo "configure:3340: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3715: checking for $ac_word" >&5
+echo "configure:3376: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3805: checking for catalogs to be installed" >&5
+echo "configure:3466: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3833: checking for linux/version.h" >&5
+echo "configure:3494: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3838 "configure"
+#line 3499 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3504: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:3906: checking for Cygwin environment" >&5
+echo "configure:3567: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3911 "configure"
+#line 3572 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:3922: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:3939: checking for mingw32 environment" >&5
+echo "configure:3600: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3944 "configure"
+#line 3605 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:3951: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3970: checking for executable suffix" >&5
+echo "configure:3631: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:3641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4006: checking for $ac_word" >&5
+echo "configure:3667: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4042: checking for $ac_word" >&5
+echo "configure:3703: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4075: checking for $ac_word" >&5
+echo "configure:3736: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:4109: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3770: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4117 "configure"
+#line 3778 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:4128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:4151: checking lex output file root" >&5
+echo "configure:3812: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:4172: checking whether yytext is a pointer" >&5
+echo "configure:3833: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 4184 "configure"
+#line 3845 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:4191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4214: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3875: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4248: checking for $ac_hdr" >&5
+echo "configure:3909: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4253 "configure"
+#line 3914 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3919: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4287: checking for $ac_func" >&5
+echo "configure:3948: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4292 "configure"
+#line 3953 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4344: checking for $ac_hdr that defines DIR" >&5
+echo "configure:4005: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4349 "configure"
+#line 4010 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4018: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4382: checking for opendir in -ldir" >&5
+echo "configure:4043: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4051 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4423: checking for opendir in -lx" >&5
+echo "configure:4084: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4431 "configure"
+#line 4092 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4475: checking whether strstr must be declared" >&5
+echo "configure:4136: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4480 "configure"
+#line 4141 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4501: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4522: checking whether free must be declared" >&5
+echo "configure:4183: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4527 "configure"
+#line 4188 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4209: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:4569: checking whether sbrk must be declared" >&5
+echo "configure:4230: checking whether sbrk must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4574 "configure"
+#line 4235 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) sbrk
; return 0; }
EOF
-if { (eval echo configure:4595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_sbrk=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4616: checking whether getenv must be declared" >&5
+echo "configure:4277: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4621 "configure"
+#line 4282 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4303: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
fi
echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
-echo "configure:4663: checking whether environ must be declared" >&5
+echo "configure:4324: checking whether environ must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4668 "configure"
+#line 4329 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) environ
; return 0; }
EOF
-if { (eval echo configure:4689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_environ=no
else
# constants, while still supporting pre-ANSI compilers which do not
# support string concatenation.
echo $ac_n "checking whether ANSI C string concatenation works""... $ac_c" 1>&6
-echo "configure:4717: checking whether ANSI C string concatenation works" >&5
+echo "configure:4378: checking whether ANSI C string concatenation works" >&5
if eval "test \"`echo '$''{'ld_cv_string_concatenation'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4722 "configure"
+#line 4383 "configure"
#include "confdefs.h"
int main() {
char *a = "a" "a";
; return 0; }
EOF
-if { (eval echo configure:4729: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ld_cv_string_concatenation=yes
else
s%@SET_MAKE@%$SET_MAKE%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
mri.c
mri.h
pe-dll.c
+pe-dll.h
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 03:11-0700\n"
+"POT-Creation-Date: 2000-02-25 22:20-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"
-#: emultempl/armcoff.em:65
+#: emultempl/armcoff.em:69
msgid " --support-old-code Support interworking with old code\n"
msgstr ""
-#: emultempl/armcoff.em:130
+#: emultempl/armcoff.em:70
+msgid " --thumb-entry=<sym> Set the entry point to be Thumb symbol <sym>\n"
+msgstr ""
+
+#: emultempl/armcoff.em:139
#, c-format
msgid "Errors encountered processing file %s"
msgstr ""
-#: emultempl/pe.em:198
+#: emultempl/armcoff.em:205 emultempl/pe.em:1030
+msgid "%P: warning: '--thumb-entry %s' is overriding '-e %s'\n"
+msgstr ""
+
+#: emultempl/armcoff.em:210 emultempl/pe.em:1035
+msgid "%P: warning: connot find thumb start symbol %s\n"
+msgstr ""
+
+#: emultempl/pe.em:255
msgid ""
" --base_file <basefile> Generate a base file for relocatable "
"DLLs\n"
msgstr ""
-#: emultempl/pe.em:199
+#: emultempl/pe.em:256
msgid ""
" --dll Set image base to the default for DLLs\n"
msgstr ""
-#: emultempl/pe.em:200
+#: emultempl/pe.em:257
msgid " --file-alignment <size> Set file alignment\n"
msgstr ""
-#: emultempl/pe.em:201
+#: emultempl/pe.em:258
msgid " --heap <size> Set initial size of the heap\n"
msgstr ""
-#: emultempl/pe.em:202
+#: emultempl/pe.em:259
msgid ""
" --image-base <address> Set start address of the executable\n"
msgstr ""
-#: emultempl/pe.em:203
+#: emultempl/pe.em:260
msgid ""
" --major-image-version <number> Set version number of the executable\n"
msgstr ""
-#: emultempl/pe.em:204
+#: emultempl/pe.em:261
msgid " --major-os-version <number> Set minimum required OS version\n"
msgstr ""
-#: emultempl/pe.em:205
+#: emultempl/pe.em:262
msgid ""
" --major-subsystem-version <number> Set minimum required OS subsystem "
"version\n"
msgstr ""
-#: emultempl/pe.em:206
+#: emultempl/pe.em:263
msgid ""
" --minor-image-version <number> Set revision number of the executable\n"
msgstr ""
-#: emultempl/pe.em:207
+#: emultempl/pe.em:264
msgid " --minor-os-version <number> Set minimum required OS revision\n"
msgstr ""
-#: emultempl/pe.em:208
+#: emultempl/pe.em:265
msgid ""
" --minor-subsystem-version <number> Set minimum required OS subsystem "
"revision\n"
msgstr ""
-#: emultempl/pe.em:209
+#: emultempl/pe.em:266
msgid " --section-alignment <size> Set section alignment\n"
msgstr ""
-#: emultempl/pe.em:210
+#: emultempl/pe.em:267
msgid " --stack <size> Set size of the initial stack\n"
msgstr ""
-#: emultempl/pe.em:211
+#: emultempl/pe.em:268
msgid ""
" --subsystem <name>[:<version>] Set required OS subsystem [& version]\n"
msgstr ""
-#: emultempl/pe.em:212
+#: emultempl/pe.em:269
msgid ""
" --support-old-code Support interworking with old code\n"
msgstr ""
-#: emultempl/pe.em:214
+#: emultempl/pe.em:270
+msgid ""
+" --thumb-entry=<symbol> Set the entry point to be Thumb "
+"<symbol>\n"
+msgstr ""
+
+#: emultempl/pe.em:272
msgid ""
" --add-stdcall-alias Export symbols with and without @nn\n"
msgstr ""
-#: emultempl/pe.em:215
+#: emultempl/pe.em:273
msgid " --disable-stdcall-fixup Don't link _sym to _sym@nn\n"
msgstr ""
-#: emultempl/pe.em:216
+#: emultempl/pe.em:274
msgid ""
" --enable-stdcall-fixup Link _sym to _sym@nn without warnings\n"
msgstr ""
-#: emultempl/pe.em:217
+#: emultempl/pe.em:275
msgid ""
" --exclude-symbols sym,sym,... Exclude symbols from automatic export\n"
msgstr ""
-#: emultempl/pe.em:218
+#: emultempl/pe.em:276
msgid ""
" --export-all-symbols Automatically export all globals to "
"DLL\n"
msgstr ""
-#: emultempl/pe.em:219
+#: emultempl/pe.em:277
msgid " --kill-at Remove @nn from exported symbols\n"
msgstr ""
-#: emultempl/pe.em:220
+#: emultempl/pe.em:278
msgid " --out-implib <file> Generate import library\n"
msgstr ""
-#: emultempl/pe.em:221
+#: emultempl/pe.em:279
msgid ""
" --output-def <file> Generate a .DEF file for the built DLL\n"
msgstr ""
-#: emultempl/pe.em:284
+#: emultempl/pe.em:280
+msgid " --warn-duplicate-exports Warn about duplicate exports.\n"
+msgstr ""
+
+#: emultempl/pe.em:281
+msgid ""
+" --compat-implib Create backward compatible import "
+"libs;\n"
+msgstr ""
+
+#: emultempl/pe.em:282
+msgid " create __imp_<SYMBOL> as well.\n"
+msgstr ""
+
+#: emultempl/pe.em:350
msgid "%P: warning: bad version number in -subsystem option\n"
msgstr ""
-#: emultempl/pe.em:300
+#: emultempl/pe.em:386
msgid "%P%F: invalid subsystem type %s\n"
msgstr ""
-#: emultempl/pe.em:315
+#: emultempl/pe.em:401
msgid "%P%F: invalid hex number for PE parameter '%s'\n"
msgstr ""
-#: emultempl/pe.em:333
+#: emultempl/pe.em:419
msgid "%P%F: strange hex info for PE parameter '%s'\n"
msgstr ""
-#: emultempl/pe.em:372
+#: emultempl/pe.em:458
#, c-format
msgid "%s: Can't open base file %s\n"
msgstr ""
-#: emultempl/pe.em:505
+#: emultempl/pe.em:600
msgid "%P: warning, file alignment > section alignment.\n"
msgstr ""
-#: emultempl/pe.em:575 emultempl/pe.em:601
+#: emultempl/pe.em:670 emultempl/pe.em:696
#, c-format
msgid "Warning: resolving %s by linking to %s\n"
msgstr ""
-#: emultempl/pe.em:580 emultempl/pe.em:606
+#: emultempl/pe.em:675 emultempl/pe.em:701
msgid "Use --enable-stdcall-fixup to disable these warnings\n"
msgstr ""
-#: emultempl/pe.em:581 emultempl/pe.em:607
+#: emultempl/pe.em:676 emultempl/pe.em:702
msgid "Use --disable-stdcall-fixup to disable these fixups\n"
msgstr ""
-#: emultempl/pe.em:623
+#: emultempl/pe.em:718
msgid "%F%P: PE operations on non PE file.\n"
msgstr ""
-#: emultempl/pe.em:724
+#: emultempl/pe.em:835
#, c-format
msgid "Errors encountered processing file %s\n"
msgstr ""
-#: emultempl/pe.em:747
+#: emultempl/pe.em:858
#, c-format
msgid "Errors encountered processing file %s for interworking"
msgstr ""
-#: emultempl/pe.em:802 ldlang.c:1657 ldlang.c:3934 ldlang.c:3968 ldmain.c:992
+#: emultempl/pe.em:913 ldlang.c:1961 ldlang.c:4333 ldlang.c:4367 ldmain.c:996
msgid "%P%F: bfd_link_hash_lookup failed: %E\n"
msgstr ""
msgid "%B%F: could not read symbols; %E\n"
msgstr ""
-#: ldcref.c:445 ldmain.c:1060 ldmain.c:1064
+#: ldcref.c:445 ldmain.c:1064 ldmain.c:1068
msgid "%B%F: could not read symbols: %E\n"
msgstr ""
-#: ldcref.c:517 ldcref.c:524 ldmain.c:1110 ldmain.c:1117
+#: ldcref.c:517 ldcref.c:524 ldmain.c:1114 ldmain.c:1121
msgid "%B%F: could not read relocs: %E\n"
msgstr ""
"\n"
msgstr ""
-#: ldemul.c:223
+#: ldemul.c:224
msgid "%S SYSLIB ignored\n"
msgstr ""
-#: ldemul.c:231
+#: ldemul.c:232
msgid "%S HLL ignored\n"
msgstr ""
-#: ldemul.c:252
+#: ldemul.c:253
msgid "%P: unrecognised emulation mode: %s\n"
msgstr ""
-#: ldemul.c:253
+#: ldemul.c:254
msgid "Supported emulations: "
msgstr ""
-#: ldemul.c:297
+#: ldemul.c:298
msgid " no emulation specific options.\n"
msgstr ""
-#: ldexp.c:156
+#: ldexp.c:157
msgid "%F%P: %s uses undefined section %s\n"
msgstr ""
-#: ldexp.c:158
+#: ldexp.c:159
msgid "%F%P: %s forward reference of section %s\n"
msgstr ""
-#: ldexp.c:270
+#: ldexp.c:271
msgid "%F%S %% by zero\n"
msgstr ""
-#: ldexp.c:277
+#: ldexp.c:278
msgid "%F%S / by zero\n"
msgstr ""
-#: ldexp.c:400
+#: ldexp.c:401
msgid "%X%S: unresolvable symbol `%s' referenced in expression\n"
msgstr ""
-#: ldexp.c:419
+#: ldexp.c:420
msgid "%F%S: undefined symbol `%s' referenced in expression\n"
msgstr ""
-#: ldexp.c:600
+#: ldexp.c:602
msgid "%F%S can not PROVIDE assignment to location counter\n"
msgstr ""
-#: ldexp.c:610
+#: ldexp.c:612
msgid "%F%S invalid assignment to location counter\n"
msgstr ""
-#: ldexp.c:614
+#: ldexp.c:616
msgid "%F%S assignment to location counter invalid outside of SECTION\n"
msgstr ""
-#: ldexp.c:624
+#: ldexp.c:626
msgid "%F%S cannot move location counter backwards (from %V to %V)\n"
msgstr ""
-#: ldexp.c:652
+#: ldexp.c:654
msgid "%P%F:%s: hash creation failed\n"
msgstr ""
-#: ldexp.c:949
+#: ldexp.c:951
msgid "%F%S nonconstant expression for %s\n"
msgstr ""
-#: ldexp.c:982
+#: ldexp.c:984
msgid "%F%S non constant expression for %s\n"
msgstr ""
-#: ldfile.c:109
+#: ldfile.c:106
#, c-format
msgid "attempt to open %s failed\n"
msgstr ""
-#: ldfile.c:111
+#: ldfile.c:108
#, c-format
msgid "attempt to open %s succeeded\n"
msgstr ""
-#: ldfile.c:119
+#: ldfile.c:114
msgid "%F%P: invalid BFD target `%s'\n"
msgstr ""
-#: ldfile.c:204
+#: ldfile.c:136
+msgid "%P: skipping incompatible %s when searching for %s"
+msgstr ""
+
+#: ldfile.c:227
msgid "%F%P: cannot open %s for %s: %E\n"
msgstr ""
-#: ldfile.c:207
+#: ldfile.c:230
msgid "%F%P: cannot open %s: %E\n"
msgstr ""
-#: ldfile.c:225
+#: ldfile.c:250
msgid "%F%P: cannot find %s\n"
msgstr ""
-#: ldfile.c:243 ldfile.c:258
+#: ldfile.c:268 ldfile.c:283
#, c-format
msgid "cannot find script file %s\n"
msgstr ""
-#: ldfile.c:245 ldfile.c:260
+#: ldfile.c:270 ldfile.c:285
#, c-format
msgid "opened script file %s\n"
msgstr ""
-#: ldfile.c:303
+#: ldfile.c:328
msgid "%P%F: cannot open linker script file %s: %E\n"
msgstr ""
-#: ldfile.c:344
+#: ldfile.c:369
msgid "%P%F: unknown architecture: %s\n"
msgstr ""
-#: ldfile.c:361
+#: ldfile.c:386
msgid "%P%F: target architecture respecified\n"
msgstr ""
-#: ldfile.c:414
+#: ldfile.c:439
msgid "%P%F: cannot represent machine `%s'\n"
msgstr ""
-#: ldlang.c:723
+#: ldlang.c:736
msgid ""
"\n"
"Memory Configuration\n"
"\n"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Name"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Origin"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Length"
msgstr ""
-#: ldlang.c:725
+#: ldlang.c:738
msgid "Attributes"
msgstr ""
-#: ldlang.c:767
+#: ldlang.c:780
msgid ""
"\n"
"Linker script and memory map\n"
"\n"
msgstr ""
-#: ldlang.c:784
+#: ldlang.c:797
msgid "%P%F: Illegal use of `%s' section"
msgstr ""
-#: ldlang.c:794
+#: ldlang.c:807
msgid "%P%F: output format %s cannot represent section called %s\n"
msgstr ""
-#: ldlang.c:915
+#: ldlang.c:970
msgid "%P: %B: warning: ignoring duplicate section `%s'\n"
msgstr ""
-#: ldlang.c:929
+#: ldlang.c:973
+msgid "%P: %B: warning: ignoring duplicate `%s' section symbol `%s'\n"
+msgstr ""
+
+#: ldlang.c:987
msgid "%P: %B: warning: duplicate section `%s' has different size\n"
msgstr ""
-#: ldlang.c:1320
+#: ldlang.c:1039
+msgid "%P%F: Failed to create hash table\n"
+msgstr ""
+
+#: ldlang.c:1422
msgid "%B: file not recognized: %E\n"
msgstr ""
-#: ldlang.c:1321
+#: ldlang.c:1423
msgid "%B: matching formats:"
msgstr ""
-#: ldlang.c:1328
+#: ldlang.c:1430
msgid "%F%B: file not recognized: %E\n"
msgstr ""
-#: ldlang.c:1381
+#: ldlang.c:1483
msgid "%F%B: object %B in archive is not object\n"
msgstr ""
-#: ldlang.c:1387 ldlang.c:1399
+#: ldlang.c:1489 ldlang.c:1501
msgid "%F%B: could not read symbols: %E\n"
msgstr ""
-#: ldlang.c:1452
+#: ldlang.c:1747
+msgid ""
+"%P: warning: could not find any targets that match endianness requirement\n"
+msgstr ""
+
+#: ldlang.c:1759
msgid "%P%F: target %s not found\n"
msgstr ""
-#: ldlang.c:1454
+#: ldlang.c:1761
msgid "%P%F: cannot open output file %s: %E\n"
msgstr ""
-#: ldlang.c:1462
+#: ldlang.c:1769
msgid "%P%F:%s: can not make object file: %E\n"
msgstr ""
-#: ldlang.c:1466
+#: ldlang.c:1773
msgid "%P%F:%s: can not set architecture: %E\n"
msgstr ""
-#: ldlang.c:1470
+#: ldlang.c:1777
msgid "%P%F: can not create link hash table: %E\n"
msgstr ""
-#: ldlang.c:1780
+#: ldlang.c:2084
msgid " load address 0x%V"
msgstr ""
-#: ldlang.c:1909
+#: ldlang.c:2214
msgid "%W (size before relaxing)\n"
msgstr ""
-#: ldlang.c:1988
+#: ldlang.c:2296
#, c-format
msgid "Address of section %s set to "
msgstr ""
-#: ldlang.c:2127
+#: ldlang.c:2445
#, c-format
msgid "Fail with %d\n"
msgstr ""
-#: ldlang.c:2357
+#: ldlang.c:2684
msgid "%X%P: section %s [%V -> %V] overlaps section %s [%V -> %V]\n"
msgstr ""
-#: ldlang.c:2408
+#: ldlang.c:2718
+msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
+msgstr ""
+
+#: ldlang.c:2726
+msgid "%X%P: region %s is full (%B section %s)\n"
+msgstr ""
+
+#: ldlang.c:2775
msgid "%P%X: Internal error on COFF shared library section %s\n"
msgstr ""
-#: ldlang.c:2449
+#: ldlang.c:2816
msgid "%P: warning: no memory region specified for section `%s'\n"
msgstr ""
-#: ldlang.c:2462
+#: ldlang.c:2829
msgid "%P: warning: changing start of section %s by %u bytes\n"
msgstr ""
-#: ldlang.c:2476
+#: ldlang.c:2843
msgid "%F%S: non constant address expression for section %s\n"
msgstr ""
-#: ldlang.c:2528
-msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
-msgstr ""
-
-#: ldlang.c:2536
-msgid "%X%P: region %s is full (%B section %s)\n"
+#: ldlang.c:2907
+msgid "%X%P: use an absolute load address or a load memory region, not both\n"
msgstr ""
-#: ldlang.c:2638
+#: ldlang.c:3020
msgid "%P%F: can't relax section: %E\n"
msgstr ""
-#: ldlang.c:2799
+#: ldlang.c:3185
msgid "%F%P: invalid data statement\n"
msgstr ""
-#: ldlang.c:2828
+#: ldlang.c:3222
msgid "%F%P: invalid reloc statement\n"
msgstr ""
-#: ldlang.c:2962
+#: ldlang.c:3358
msgid "%P%F:%s: can't set start address\n"
msgstr ""
-#: ldlang.c:2975 ldlang.c:2992
+#: ldlang.c:3371 ldlang.c:3388
msgid "%P%F: can't set start address\n"
msgstr ""
-#: ldlang.c:2987
+#: ldlang.c:3383
msgid "%P: warning: cannot find entry symbol %s; defaulting to %V\n"
msgstr ""
-#: ldlang.c:2997
+#: ldlang.c:3393
msgid "%P: warning: cannot find entry symbol %s; not setting start address\n"
msgstr ""
-#: ldlang.c:3039
+#: ldlang.c:3435
msgid ""
"%P: warning: %s architecture of input file `%B' is incompatible with %s "
"output\n"
msgstr ""
-#: ldlang.c:3057
+#: ldlang.c:3453
msgid "%E%X: failed to merge target specific data of file %B\n"
msgstr ""
-#: ldlang.c:3142
+#: ldlang.c:3540
msgid ""
"\n"
"Allocating common symbols\n"
msgstr ""
-#: ldlang.c:3143
+#: ldlang.c:3541
msgid ""
"Common symbol size file\n"
"\n"
#. This message happens when using the
#. svr3.ifile linker script, so I have
#. disabled it.
-#: ldlang.c:3232
+#: ldlang.c:3626
msgid "%P: no [COMMON] command, defaulting to .bss\n"
msgstr ""
-#: ldlang.c:3295
+#: ldlang.c:3686
msgid "%P%F: invalid syntax in flags\n"
msgstr ""
-#: ldlang.c:3891
+#: ldlang.c:4281
msgid "%P%Fmultiple STARTUP files\n"
msgstr ""
-#: ldlang.c:4153
+#: ldlang.c:4553
msgid "%F%P: bfd_record_phdr failed: %E\n"
msgstr ""
-#: ldlang.c:4172
+#: ldlang.c:4572
msgid "%X%P: section `%s' assigned to non-existent phdr `%s'\n"
msgstr ""
-#: ldlang.c:4471
+#: ldlang.c:4881
msgid "%X%P: unknown language `%s' in version information\n"
msgstr ""
-#: ldlang.c:4520
+#: ldlang.c:4930
msgid "%X%P: duplicate version tag `%s'\n"
msgstr ""
-#: ldlang.c:4533 ldlang.c:4546
+#: ldlang.c:4943 ldlang.c:4956
msgid "%X%P: duplicate expression `%s' in version information\n"
msgstr ""
-#: ldlang.c:4583
+#: ldlang.c:4993
msgid "%X%P: unable to find version dependency `%s'\n"
msgstr ""
-#: ldlang.c:4605
+#: ldlang.c:5015
msgid "%X%P: unable to read .exports section contents"
msgstr ""
msgid "%X%P: can't set BFD default target to `%s': %E\n"
msgstr ""
-#: ldmain.c:258
+#: ldmain.c:262
msgid "%P%F: -r and --mpc860c0 may not be used together\n"
msgstr ""
-#: ldmain.c:260
+#: ldmain.c:264
msgid "%P%F: --relax and -r may not be used together\n"
msgstr ""
-#: ldmain.c:262
+#: ldmain.c:266
msgid "%P%F: -r and -shared may not be used together\n"
msgstr ""
-#: ldmain.c:291
+#: ldmain.c:295
msgid "using internal linker script:\n"
msgstr ""
-#: ldmain.c:310
+#: ldmain.c:314
msgid "%P%F: no input files\n"
msgstr ""
-#: ldmain.c:315
+#: ldmain.c:319
msgid "%P: mode %s\n"
msgstr ""
-#: ldmain.c:333
+#: ldmain.c:337
msgid "%P%F: cannot open map file %s: %E\n"
msgstr ""
-#: ldmain.c:379
+#: ldmain.c:383
msgid "%P: link errors found, deleting executable `%s'\n"
msgstr ""
-#: ldmain.c:390
+#: ldmain.c:394
msgid "%F%B: final close failed: %E\n"
msgstr ""
-#: ldmain.c:414
+#: ldmain.c:418
msgid "%X%P: unable to open for source of copy `%s'\n"
msgstr ""
-#: ldmain.c:416
+#: ldmain.c:420
msgid "%X%P: unable to open for destination of copy `%s'\n"
msgstr ""
-#: ldmain.c:422
+#: ldmain.c:426
msgid "%P: Error writing file `%s'\n"
msgstr ""
-#: ldmain.c:428 pe-dll.c:981
+#: ldmain.c:432 pe-dll.c:1085
#, c-format
msgid "%P: Error closing file `%s'\n"
msgstr ""
-#: ldmain.c:445
+#: ldmain.c:449
#, c-format
msgid "%s: total time in link: %ld.%06ld\n"
msgstr ""
-#: ldmain.c:448
+#: ldmain.c:452
#, c-format
msgid "%s: data size %ld\n"
msgstr ""
-#: ldmain.c:489
+#: ldmain.c:493
msgid "%P%F: missing argument to -m\n"
msgstr ""
-#: ldmain.c:603 ldmain.c:624 ldmain.c:655
+#: ldmain.c:607 ldmain.c:628 ldmain.c:659
msgid "%P%F: bfd_hash_table_init failed: %E\n"
msgstr ""
-#: ldmain.c:608 ldmain.c:627
+#: ldmain.c:612 ldmain.c:631
msgid "%P%F: bfd_hash_lookup failed: %E\n"
msgstr ""
-#: ldmain.c:642
+#: ldmain.c:646
msgid "%X%P: error: duplicate retain-symbols-file\n"
msgstr ""
-#: ldmain.c:686
+#: ldmain.c:690
msgid "%P%F: bfd_hash_lookup for insertion failed: %E\n"
msgstr ""
-#: ldmain.c:691
+#: ldmain.c:695
msgid "%P: `-retain-symbols-file' overrides `-s' and `-S'\n"
msgstr ""
-#: ldmain.c:768
+#: ldmain.c:772
msgid "Archive member included"
msgstr ""
-#: ldmain.c:769
+#: ldmain.c:773
msgid "because of file (symbol)"
msgstr ""
-#: ldmain.c:841
+#: ldmain.c:845
msgid "%X%C: multiple definition of `%T'\n"
msgstr ""
-#: ldmain.c:844
+#: ldmain.c:848
msgid "%D: first defined here\n"
msgstr ""
-#: ldmain.c:873
+#: ldmain.c:877
msgid "%B: warning: definition of `%T' overriding common\n"
msgstr ""
-#: ldmain.c:876
+#: ldmain.c:880
msgid "%B: warning: common is here\n"
msgstr ""
-#: ldmain.c:883
+#: ldmain.c:887
msgid "%B: warning: common of `%T' overridden by definition\n"
msgstr ""
-#: ldmain.c:886
+#: ldmain.c:890
msgid "%B: warning: defined here\n"
msgstr ""
-#: ldmain.c:893
+#: ldmain.c:897
msgid "%B: warning: common of `%T' overridden by larger common\n"
msgstr ""
-#: ldmain.c:896
+#: ldmain.c:900
msgid "%B: warning: larger common is here\n"
msgstr ""
-#: ldmain.c:900
+#: ldmain.c:904
msgid "%B: warning: common of `%T' overriding smaller common\n"
msgstr ""
-#: ldmain.c:903
+#: ldmain.c:907
msgid "%B: warning: smaller common is here\n"
msgstr ""
-#: ldmain.c:907
+#: ldmain.c:911
msgid "%B: warning: multiple common of `%T'\n"
msgstr ""
-#: ldmain.c:909
+#: ldmain.c:913
msgid "%B: warning: previous common is here\n"
msgstr ""
-#: ldmain.c:931 ldmain.c:970
+#: ldmain.c:935 ldmain.c:974
msgid "%P: warning: global constructor %s used\n"
msgstr ""
-#: ldmain.c:980
+#: ldmain.c:984
msgid "%P%F: BFD backend error: BFD_RELOC_CTOR unsupported\n"
msgstr ""
-#: ldmain.c:1166
+#: ldmain.c:1170
msgid "%F%P: bfd_hash_table_init failed: %E\n"
msgstr ""
-#: ldmain.c:1173
+#: ldmain.c:1177
msgid "%F%P: bfd_hash_lookup failed: %E\n"
msgstr ""
-#: ldmain.c:1192
+#: ldmain.c:1196
msgid "%X%C: undefined reference to `%T'\n"
msgstr ""
-#: ldmain.c:1195
+#: ldmain.c:1199
msgid "%D: more undefined references to `%T' follow\n"
msgstr ""
-#: ldmain.c:1201
+#: ldmain.c:1205
msgid "%X%B: undefined reference to `%T'\n"
msgstr ""
-#: ldmain.c:1204
+#: ldmain.c:1208
msgid "%B: more undefined references to `%T' follow\n"
msgstr ""
-#: ldmain.c:1225 ldmain.c:1247 ldmain.c:1267
+#: ldmain.c:1229 ldmain.c:1251 ldmain.c:1271
msgid "%P%X: generated"
msgstr ""
-#: ldmain.c:1228
+#: ldmain.c:1232
msgid " relocation truncated to fit: %s %T"
msgstr ""
-#: ldmain.c:1250
+#: ldmain.c:1254
#, c-format
msgid "dangerous relocation: %s\n"
msgstr ""
-#: ldmain.c:1270
+#: ldmain.c:1274
msgid " reloc refers to symbol `%T' which is not being output\n"
msgstr ""
msgid "%F%P: internal error %s %d\n"
msgstr ""
+#: ldmisc.c:550
+msgid "%P: internal error: aborting at %s line %d in %s\n"
+msgstr ""
+
+#: ldmisc.c:553
+msgid "%P: internal error: aborting at %s line %d\n"
+msgstr ""
+
+#: ldmisc.c:555
+msgid "%P%F: please report this bug\n"
+msgstr ""
+
#: ldver.c:35
#, c-format
msgid "GNU ld version %s (with BFD %s)\n"
msgstr ""
-#: ldver.c:42 lexsup.c:872
+#: ldver.c:42 lexsup.c:887
msgid " Supported emulations:\n"
msgstr ""
msgid "%F%P: final link failed: %E\n"
msgstr ""
-#: lexsup.c:152 lexsup.c:235 lexsup.c:241
+#: lexsup.c:155 lexsup.c:238 lexsup.c:244
msgid "KEYWORD"
msgstr ""
-#: lexsup.c:152
+#: lexsup.c:155
msgid "Shared library control for HP/UX compatibility"
msgstr ""
-#: lexsup.c:155
+#: lexsup.c:158
msgid "ARCH"
msgstr ""
-#: lexsup.c:155
+#: lexsup.c:158
msgid "Set architecture"
msgstr ""
-#: lexsup.c:157 lexsup.c:300
+#: lexsup.c:160 lexsup.c:307
msgid "TARGET"
msgstr ""
-#: lexsup.c:157
+#: lexsup.c:160
msgid "Specify target for following input files"
msgstr ""
-#: lexsup.c:159 lexsup.c:198 lexsup.c:208 lexsup.c:217 lexsup.c:284
-#: lexsup.c:307 lexsup.c:341
+#: lexsup.c:162 lexsup.c:201 lexsup.c:211 lexsup.c:220 lexsup.c:291
+#: lexsup.c:314 lexsup.c:348
msgid "FILE"
msgstr ""
-#: lexsup.c:159
+#: lexsup.c:162
msgid "Read MRI format linker script"
msgstr ""
-#: lexsup.c:161
+#: lexsup.c:164
msgid "Force common symbols to be defined"
msgstr ""
-#: lexsup.c:165 lexsup.c:331 lexsup.c:333 lexsup.c:335
+#: lexsup.c:168 lexsup.c:338 lexsup.c:340 lexsup.c:342
msgid "ADDRESS"
msgstr ""
-#: lexsup.c:165
+#: lexsup.c:168
msgid "Set start address"
msgstr ""
-#: lexsup.c:167
+#: lexsup.c:170
msgid "Export all dynamic symbols"
msgstr ""
-#: lexsup.c:169
+#: lexsup.c:172
msgid "Link big-endian objects"
msgstr ""
-#: lexsup.c:171
+#: lexsup.c:174
msgid "Link little-endian objects"
msgstr ""
-#: lexsup.c:173 lexsup.c:176
+#: lexsup.c:176 lexsup.c:179
msgid "SHLIB"
msgstr ""
-#: lexsup.c:173
+#: lexsup.c:176
msgid "Auxiliary filter for shared object symbol table"
msgstr ""
-#: lexsup.c:176
+#: lexsup.c:179
msgid "Filter for shared object symbol table"
msgstr ""
-#: lexsup.c:178
+#: lexsup.c:181
msgid "Ignored"
msgstr ""
-#: lexsup.c:180
+#: lexsup.c:183
msgid "SIZE"
msgstr ""
-#: lexsup.c:180
+#: lexsup.c:183
msgid "Small data size (if no size, same as --shared)"
msgstr ""
-#: lexsup.c:183
+#: lexsup.c:186
msgid "FILENAME"
msgstr ""
-#: lexsup.c:183
+#: lexsup.c:186
msgid "Set internal name of shared library"
msgstr ""
-#: lexsup.c:185
+#: lexsup.c:188
msgid "LIBNAME"
msgstr ""
-#: lexsup.c:185
+#: lexsup.c:188
msgid "Search for library LIBNAME"
msgstr ""
-#: lexsup.c:187
+#: lexsup.c:190
msgid "DIRECTORY"
msgstr ""
-#: lexsup.c:187
+#: lexsup.c:190
msgid "Add DIRECTORY to library search path"
msgstr ""
-#: lexsup.c:189
+#: lexsup.c:192
msgid "EMULATION"
msgstr ""
-#: lexsup.c:189
+#: lexsup.c:192
msgid "Set emulation"
msgstr ""
-#: lexsup.c:191
+#: lexsup.c:194
msgid "Print map file on standard output"
msgstr ""
-#: lexsup.c:193
+#: lexsup.c:196
msgid "Do not page align data"
msgstr ""
-#: lexsup.c:195
+#: lexsup.c:198
msgid "Do not page align data, do not make text readonly"
msgstr ""
-#: lexsup.c:198
+#: lexsup.c:201
msgid "Set output file name"
msgstr ""
-#: lexsup.c:200
+#: lexsup.c:203
msgid "Optimize output file"
msgstr ""
-#: lexsup.c:202
+#: lexsup.c:205
msgid "Ignored for SVR4 compatibility"
msgstr ""
-#: lexsup.c:204
+#: lexsup.c:207
msgid "Generate relocateable output"
msgstr ""
-#: lexsup.c:208
+#: lexsup.c:211
msgid "Just link symbols (if directory, same as --rpath)"
msgstr ""
-#: lexsup.c:211
+#: lexsup.c:214
msgid "Strip all symbols"
msgstr ""
-#: lexsup.c:213
+#: lexsup.c:216
msgid "Strip debugging symbols"
msgstr ""
-#: lexsup.c:215
+#: lexsup.c:218
msgid "Trace file opens"
msgstr ""
-#: lexsup.c:217
+#: lexsup.c:220
msgid "Read linker script"
msgstr ""
-#: lexsup.c:219 lexsup.c:231 lexsup.c:327 lexsup.c:344 lexsup.c:361
+#: lexsup.c:222 lexsup.c:234 lexsup.c:277 lexsup.c:289 lexsup.c:334
+#: lexsup.c:351 lexsup.c:368
msgid "SYMBOL"
msgstr ""
-#: lexsup.c:219
+#: lexsup.c:222
msgid "Start with undefined reference to SYMBOL"
msgstr ""
-#: lexsup.c:221
+#: lexsup.c:224
msgid "Build global constructor/destructor tables"
msgstr ""
-#: lexsup.c:223
+#: lexsup.c:226
msgid "Print version information"
msgstr ""
-#: lexsup.c:225
+#: lexsup.c:228
msgid "Print version and emulation information"
msgstr ""
-#: lexsup.c:227
+#: lexsup.c:230
msgid "Discard all local symbols"
msgstr ""
-#: lexsup.c:229
+#: lexsup.c:232
msgid "Discard temporary local symbols"
msgstr ""
-#: lexsup.c:231
+#: lexsup.c:234
msgid "Trace mentions of SYMBOL"
msgstr ""
-#: lexsup.c:233 lexsup.c:309 lexsup.c:311
+#: lexsup.c:236 lexsup.c:316 lexsup.c:318
msgid "PATH"
msgstr ""
-#: lexsup.c:233
+#: lexsup.c:236
msgid "Default search path for Solaris compatibility"
msgstr ""
-#: lexsup.c:235
+#: lexsup.c:238
msgid "Ignored for Solaris compatibility"
msgstr ""
-#: lexsup.c:237
+#: lexsup.c:240
msgid "Start a group"
msgstr ""
-#: lexsup.c:239
+#: lexsup.c:242
msgid "End a group"
msgstr ""
-#: lexsup.c:241
+#: lexsup.c:244
msgid "Ignored for SunOS compatibility"
msgstr ""
-#: lexsup.c:243
+#: lexsup.c:246
msgid "Link against shared libraries"
msgstr ""
-#: lexsup.c:249
+#: lexsup.c:252
msgid "Do not link against shared libraries"
msgstr ""
-#: lexsup.c:257
+#: lexsup.c:260
msgid "Bind global references locally"
msgstr ""
-#: lexsup.c:259
+#: lexsup.c:262
msgid "Check section addresses for overlaps (default)"
msgstr ""
-#: lexsup.c:261
+#: lexsup.c:264
msgid "Do not check section addresses for overlaps"
msgstr ""
-#: lexsup.c:264
+#: lexsup.c:267
msgid "Output cross reference table"
msgstr ""
-#: lexsup.c:266
+#: lexsup.c:269
msgid "SYMBOL=EXPRESSION"
msgstr ""
-#: lexsup.c:266
+#: lexsup.c:269
msgid "Define a symbol"
msgstr ""
-#: lexsup.c:268
+#: lexsup.c:271
msgid "Demangle symbol names"
msgstr ""
-#: lexsup.c:270
+#: lexsup.c:273
msgid "PROGRAM"
msgstr ""
-#: lexsup.c:270
+#: lexsup.c:273
msgid "Set the dynamic linker to use"
msgstr ""
-#: lexsup.c:272
+#: lexsup.c:275
msgid "Generate embedded relocs"
msgstr ""
-#: lexsup.c:274
+#: lexsup.c:277
+msgid "Call SYMBOL at unload-time"
+msgstr ""
+
+#: lexsup.c:279
msgid "Force generation of file with .exe suffix"
msgstr ""
-#: lexsup.c:276
+#: lexsup.c:281
msgid "Remove unused sections (on some targets)"
msgstr ""
-#: lexsup.c:279
+#: lexsup.c:284
msgid "Don't remove unused sections (default)"
msgstr ""
-#: lexsup.c:282
+#: lexsup.c:287
msgid "Print option help"
msgstr ""
-#: lexsup.c:284
+#: lexsup.c:289
+msgid "Call SYMBOL at load-time"
+msgstr ""
+
+#: lexsup.c:291
msgid "Write a map file"
msgstr ""
-#: lexsup.c:286
+#: lexsup.c:293
msgid "Do not demangle symbol names"
msgstr ""
-#: lexsup.c:288
+#: lexsup.c:295
msgid "Use less memory and more disk I/O"
msgstr ""
-#: lexsup.c:290
+#: lexsup.c:297
msgid "Allow no undefined symbols"
msgstr ""
-#: lexsup.c:292
+#: lexsup.c:299
msgid "Don't warn about mismatched input files"
msgstr ""
-#: lexsup.c:294
+#: lexsup.c:301
msgid "Turn off --whole-archive"
msgstr ""
-#: lexsup.c:296
+#: lexsup.c:303
msgid "Create an output file even if errors occur"
msgstr ""
-#: lexsup.c:300
+#: lexsup.c:307
msgid "Specify target of output file"
msgstr ""
-#: lexsup.c:302
+#: lexsup.c:309
msgid "Ignored for Linux compatibility"
msgstr ""
-#: lexsup.c:304
+#: lexsup.c:311
msgid "Relax branches on certain targets"
msgstr ""
-#: lexsup.c:307
+#: lexsup.c:314
msgid "Keep only symbols listed in FILE"
msgstr ""
-#: lexsup.c:309
+#: lexsup.c:316
msgid "Set runtime shared library search path"
msgstr ""
-#: lexsup.c:311
+#: lexsup.c:318
msgid "Set link time shared library search path"
msgstr ""
-#: lexsup.c:313
+#: lexsup.c:320
msgid "Create a shared library"
msgstr ""
-#: lexsup.c:317
+#: lexsup.c:324
msgid "Sort common symbols by size"
msgstr ""
-#: lexsup.c:321
+#: lexsup.c:328
msgid "Split output sections for each file"
msgstr ""
-#: lexsup.c:323
+#: lexsup.c:330
msgid "COUNT"
msgstr ""
-#: lexsup.c:323
+#: lexsup.c:330
msgid "Split output sections every COUNT relocs"
msgstr ""
-#: lexsup.c:325
+#: lexsup.c:332
msgid "Print memory usage statistics"
msgstr ""
-#: lexsup.c:327
+#: lexsup.c:334
msgid "Do task level linking"
msgstr ""
-#: lexsup.c:329
+#: lexsup.c:336
msgid "Use same format as native linker"
msgstr ""
-#: lexsup.c:331
+#: lexsup.c:338
msgid "Set address of .bss section"
msgstr ""
-#: lexsup.c:333
+#: lexsup.c:340
msgid "Set address of .data section"
msgstr ""
-#: lexsup.c:335
+#: lexsup.c:342
msgid "Set address of .text section"
msgstr ""
-#: lexsup.c:337
+#: lexsup.c:344
msgid "Output lots of information during link"
msgstr ""
-#: lexsup.c:341
+#: lexsup.c:348
msgid "Read version information script"
msgstr ""
-#: lexsup.c:344
+#: lexsup.c:351
msgid ""
"Take export symbols list from .exports, using\n"
"\t\t\t\tSYMBOL as the version."
msgstr ""
-#: lexsup.c:347
+#: lexsup.c:354
msgid "Warn about duplicate common symbols"
msgstr ""
-#: lexsup.c:349
+#: lexsup.c:356
msgid "Warn if global constructors/destructors are seen"
msgstr ""
-#: lexsup.c:352
+#: lexsup.c:359
msgid "Warn if the multiple GP values are used"
msgstr ""
-#: lexsup.c:354
+#: lexsup.c:361
msgid "Warn only once per undefined symbol"
msgstr ""
-#: lexsup.c:356
+#: lexsup.c:363
msgid "Warn if start of section changes due to alignment"
msgstr ""
-#: lexsup.c:359
+#: lexsup.c:366
msgid "Include all objects from following archives"
msgstr ""
-#: lexsup.c:361
+#: lexsup.c:368
msgid "Use wrapper functions for SYMBOL"
msgstr ""
-#: lexsup.c:363
+#: lexsup.c:370
msgid "[=WORDS]"
msgstr ""
-#: lexsup.c:363
+#: lexsup.c:370
msgid ""
"Modify problematic branches in last WORDS (1-10,\n"
"\t\t\t\tdefault 5) words of a page"
msgstr ""
-#: lexsup.c:525
+#: lexsup.c:520
+#, c-format
+msgid "%s: use the --help option for usage information\n"
+msgstr ""
+
+#: lexsup.c:540
msgid "%P%F: unrecognized -a option `%s'\n"
msgstr ""
-#: lexsup.c:538
+#: lexsup.c:553
msgid "%P%F: unrecognized -assert option `%s'\n"
msgstr ""
-#: lexsup.c:629
+#: lexsup.c:644
msgid "%P%F: invalid number `%s'\n"
msgstr ""
-#: lexsup.c:801
+#: lexsup.c:816
msgid "%P%F: -shared not supported\n"
msgstr ""
-#: lexsup.c:865
+#: lexsup.c:880
msgid "Copyright 1997 Free Software Foundation, Inc.\n"
msgstr ""
-#: lexsup.c:866
+#: lexsup.c:881
msgid ""
"This program is free software; you may redistribute it under the terms of\n"
"the GNU General Public License. This program has absolutely no warranty.\n"
msgstr ""
-#: lexsup.c:957
+#: lexsup.c:972
#, c-format
msgid "%s: may not nest groups (--help for usage)\n"
msgstr ""
-#: lexsup.c:968
+#: lexsup.c:983
#, c-format
msgid "%s: group ended before it began (--help for usage)\n"
msgstr ""
-#: lexsup.c:984
-msgid "Invalid argument to option \"mpc860c0\"\n"
+#: lexsup.c:1000
+#, c-format
+msgid "%s: Invalid argument to option \"mpc860c0\"\n"
msgstr ""
-#: lexsup.c:1031
+#: lexsup.c:1056
msgid "%P%F: invalid hex number `%s'\n"
msgstr ""
-#: lexsup.c:1043
+#: lexsup.c:1068
#, c-format
msgid "Usage: %s [options] file...\n"
msgstr ""
-#: lexsup.c:1045
+#: lexsup.c:1070
msgid "Options:\n"
msgstr ""
-#: lexsup.c:1122
+#. Note: Various tools (such as libtool) depend upon the
+#. format of the listings below - do not change them.
+#: lexsup.c:1149
#, c-format
-msgid ""
-"%s: supported targets:\n"
-" "
+msgid "%s: supported targets:"
msgstr ""
-#: lexsup.c:1130
+#: lexsup.c:1157
#, c-format
-msgid ""
-"%s: supported emulations:\n"
-" "
+msgid "%s: supported emulations: "
msgstr ""
-#: lexsup.c:1135
+#: lexsup.c:1162
#, c-format
msgid "%s: emulation specific options:\n"
msgstr ""
-#: lexsup.c:1139
+#: lexsup.c:1166
msgid ""
"\n"
"Report bugs to bug-gnu-utils@gnu.org\n"
msgstr ""
-#: mri.c:342
+#: mri.c:343
msgid "%P%F: unknown format type %s\n"
msgstr ""
-#: pe-dll.c:114
+#: pe-dll.c:144
#, c-format
msgid "%XUnsupported PEI architecture: %s\n"
msgstr ""
-#: pe-dll.c:346
+#: pe-dll.c:377
#, c-format
msgid "%XError, duplicate EXPORT with oridinals: %s (%d vs %d)\n"
msgstr ""
-#: pe-dll.c:352
+#: pe-dll.c:384
#, c-format
msgid "Warning, duplicate EXPORT: %s\n"
msgstr ""
-#: pe-dll.c:405
+#: pe-dll.c:446
#, c-format
msgid "%XCannot export %s: symbol not defined\n"
msgstr ""
-#: pe-dll.c:411
+#: pe-dll.c:452
#, c-format
msgid "%XCannot export %s: symbol wrong type (%d vs %d)\n"
msgstr ""
-#: pe-dll.c:418
+#: pe-dll.c:459
#, c-format
msgid "%XCannot export %s: symbol not found\n"
msgstr ""
-#: pe-dll.c:543
+#: pe-dll.c:584
#, c-format
msgid "%XError, oridinal used twice: %d (%s vs %s)\n"
msgstr ""
-#: pe-dll.c:735
+#: pe-dll.c:834
#, c-format
msgid "%XError: %d-bit reloc in dll\n"
msgstr ""
-#: pe-dll.c:854
+#: pe-dll.c:958
#, c-format
msgid "%s: Can't open output def file %s\n"
msgstr ""
-#: pe-dll.c:976
+#: pe-dll.c:1080
msgid "; no contents available\n"
msgstr ""
-#: pe-dll.c:1428
+#: pe-dll.c:1569
#, c-format
msgid "%XCan't open .lib file: %s\n"
msgstr ""
-#: pe-dll.c:1433
+#: pe-dll.c:1574
#, c-format
msgid "Creating library file: %s\n"
msgstr ""
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
-LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
AC_SUBST($1)])
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
AC_PROG_LD_GNU
])
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-targets alternative target configurations"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13.1"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:568: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_host_alias=$host
- case "$ac_cv_host_alias" in
- NONE)
- case $nonopt in
- NONE)
- if ac_cv_host_alias=`$ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) ac_cv_host_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
- ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:609: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_target_alias=$target
- case "$ac_cv_target_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_target_alias=$host_alias ;;
-
- *) ac_cv_target_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
- ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:649: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_build_alias=$build
- case "$ac_cv_build_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_build_alias=$host_alias ;;
-
- *) ac_cv_build_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
- ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:605: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:626: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:644: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:716: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:669: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:746: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:699: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:797: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:750: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:829: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:782: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 840 "configure"
+#line 793 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:798: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:871: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:824: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:876: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:829: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:904: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:857: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:936: checking for POSIXized ISC" >&5
+echo "configure:889: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:974: checking for a BSD compatible install" >&5
+echo "configure:927: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1031: checking whether build environment is sane" >&5
+echo "configure:980: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},;$program_transform_name"
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1088: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1037: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1134: checking for working aclocal" >&5
+echo "configure:1083: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1147: checking for working autoconf" >&5
+echo "configure:1096: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1160: checking for working automake" >&5
+echo "configure:1109: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1173: checking for working autoheader" >&5
+echo "configure:1122: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1186: checking for working makeinfo" >&5
+echo "configure:1135: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1209: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AR+set}\" = set"; then
+echo "configure:1158: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$AR"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1241: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1190: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1273: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1222: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1379: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1328: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1418: checking for ld used by GCC" >&5
+echo "configure:1367: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1442: checking for GNU ld" >&5
+echo "configure:1391: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1445: checking for non-GNU ld" >&5
+echo "configure:1394: checking for non-GNU ld" >&5
fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1481: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1429: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1497: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1445: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1535: checking command to parse $NM output" >&5
-if eval "test \"\${ac_cv_sys_global_symbol_pipe+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1598: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1602: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1700: checking for _ prefix in compiled symbols" >&5
-if eval "test \"\${ac_cv_sys_symbol_underscore+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1712: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1738: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1481: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftestdata
fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1774 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1530 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1796: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1552: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1801 "configure"
+#line 1557 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1831: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1863: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1898: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1930: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},;$program_transform_name"
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2109: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1714: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:2132: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:1737: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2137 "configure"
+#line 1742 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:2148: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1753: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
ac_cv_cygwin=no
fi
rm -f conftest*
+rm -f conftest*
fi
echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:2164: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:1770: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2169 "configure"
+#line 1775 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:2176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1782: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
ac_cv_mingw32=no
fi
rm -f conftest*
+rm -f conftest*
fi
echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:2192: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2197 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:2204: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_emxos2=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2223: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:1801: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
ac_cv_exeext=.exe
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.C | *.o | *.obj | *.xcoff) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2259: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1837: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2289: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1867: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2340: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1918: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2372: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2383 "configure"
+#line 1961 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2414: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1992: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2419: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:1997: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2428: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2447: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2025: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2481: checking how to run the C preprocessor" >&5
+echo "configure:2059: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2496 "configure"
+#line 2074 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2502: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2080: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2513 "configure"
+#line 2091 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2519: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2530 "configure"
+#line 2108 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2536: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2561: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2139: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2566 "configure"
+#line 2144 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2574: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2591 "configure"
+#line 2169 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2609 "configure"
+#line 2187 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2630 "configure"
+#line 2208 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2665: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2243: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2670 "configure"
+#line 2248 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2719: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2297: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2740: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:2318: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2747 "configure"
+#line 2325 "configure"
#include "confdefs.h"
int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2332: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2780: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:2358: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2785 "configure"
+#line 2363 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_off_t=yes"
+ ac_cv_type_off_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_off_t=no"
+ ac_cv_type_off_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
#define off_t long
EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2815: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:2391: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2820 "configure"
+#line 2396 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_size_t=yes"
+ ac_cv_type_size_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_size_t=no"
+ ac_cv_type_size_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2852: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:2426: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2857 "configure"
+#line 2431 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2885: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:2459: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2890 "configure"
+#line 2464 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2950: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:2524: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2955 "configure"
+#line 2529 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2980: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2554: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2985 "configure"
+#line 2559 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3036: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:2609: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3044 "configure"
+#line 2617 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3088: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2661: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3093 "configure"
+#line 2666 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3098: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2700: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3132 "configure"
+#line 2705 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3181: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:2753: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 2761 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3357: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2929: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3362 "configure"
+#line 2934 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3367: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3397: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2969: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3402 "configure"
+#line 2974 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3455: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3026: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3460 "configure"
+#line 3031 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3518: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3088: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3523 "configure"
+#line 3093 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3551: checking whether NLS is requested" >&5
+echo "configure:3121: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3571: checking whether included gettext is requested" >&5
+echo "configure:3141: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3590: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3160: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3595 "configure"
+#line 3165 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3600: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3617: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3187: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3622 "configure"
+#line 3192 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3645: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3215: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3653 "configure"
+#line 3223 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3680: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:3250: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3685 "configure"
+#line 3255 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3692: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3720: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3290: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3754: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3324: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3759 "configure"
+#line 3329 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3810: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3379: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3846: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3415: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
fi
cat > conftest.$ac_ext <<EOF
-#line 3878 "configure"
+#line 3447 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3918: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3487: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3952: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3521: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3988: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3557: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4078: checking for catalogs to be installed" >&5
+echo "configure:3647: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4106: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3675: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4111 "configure"
+#line 3680 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3685: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4193: checking for a BSD compatible install" >&5
+echo "configure:3762: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4254: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3819: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4259 "configure"
+#line 3824 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@SET_MAKE@%$SET_MAKE%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
h8500-dis.c
h8500-opc.h
hppa-dis.c
+i370-dis.c
+i370-opc.c
i386-dis.c
i960-dis.c
m10200-dis.c
mips-opc.c
mips16-opc.c
ns32k-dis.c
+pj-dis.c
+pj-opc.c
ppc-dis.c
ppc-opc.c
sh-dis.c
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-07-11 22:05-0400\n"
+"POT-Creation-Date: 2000-02-25 22:16-0500\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
msgid "branch address not on 4 byte boundary"
msgstr ""
-#: arm-dis.c:407
+#: arm-dis.c:470
msgid "<illegal precision>"
msgstr ""
+#: arm-dis.c:882
+#, c-format
+msgid "Unrecognised register name set: %s\n"
+msgstr ""
+
+#: arm-dis.c:889
+#, c-format
+msgid "Unrecognised disassembler option: %s\n"
+msgstr ""
+
+#: arm-dis.c:1053
+msgid ""
+"\n"
+"The following ARM specific disassembler options are supported for use with\n"
+"the -M switch:\n"
+msgstr ""
+
#: cgen-asm.c:224
msgid "unrecognized keyword/register name"
msgstr ""
-#: cgen-asm.c:332 fr30-ibld.c:223 m32r-ibld.c:223
+#: cgen-asm.c:332 fr30-ibld.c:223 m32r-ibld.c:227
#, c-format
msgid "operand out of range (%ld not between %ld and %ld)"
msgstr ""
msgstr ""
#. Can't happen.
-#: dis-buf.c:50
+#: dis-buf.c:56
#, c-format
msgid "Unknown error %d\n"
msgstr ""
-#: dis-buf.c:55
+#: dis-buf.c:61
#, c-format
msgid "Address 0x%x is out of bounds.\n"
msgstr ""
-#: fr30-asm.c:303 m32r-asm.c:299
+#: fr30-asm.c:305 m32r-asm.c:313
#, c-format
msgid "Unrecognized field %d while parsing.\n"
msgstr ""
#. We couldn't parse it.
-#: fr30-asm.c:367 fr30-asm.c:436 m32r-asm.c:363 m32r-asm.c:432
+#: fr30-asm.c:369 fr30-asm.c:373 fr30-asm.c:447 m32r-asm.c:377 m32r-asm.c:381
+#: m32r-asm.c:455
msgid "unrecognized instruction"
msgstr ""
#. Syntax char didn't match. Can't be this insn.
#. FIXME: would like to return something like
#. "expected char `c'"
-#: fr30-asm.c:404 m32r-asm.c:400
+#: fr30-asm.c:415 m32r-asm.c:423
msgid "syntax error"
msgstr ""
-#: fr30-asm.c:430 m32r-asm.c:426
+#: fr30-asm.c:441 m32r-asm.c:449
msgid "junk at end of line"
msgstr ""
-#: fr30-asm.c:523 m32r-asm.c:519
+#: fr30-asm.c:534 m32r-asm.c:552
#, c-format
msgid "bad instruction `%.50s...'"
msgstr ""
-#: fr30-asm.c:526 m32r-asm.c:522
+#: fr30-asm.c:537 m32r-asm.c:555
#, c-format
msgid "bad instruction `%.50s'"
msgstr ""
-#: fr30-dis.c:300 m32r-dis.c:227
+#: fr30-dis.c:300 m32r-dis.c:239
#, c-format
msgid "Unrecognized field %d while printing insn.\n"
msgstr ""
-#: fr30-ibld.c:210 m32r-ibld.c:210
+#: fr30-ibld.c:210 m32r-ibld.c:211
#, c-format
msgid "operand out of range (%lu not between 0 and %lu)"
msgstr ""
-#: fr30-ibld.c:749 m32r-ibld.c:659
+#: fr30-ibld.c:745 m32r-ibld.c:679
#, c-format
msgid "Unrecognized field %d while building insn.\n"
msgstr ""
-#: fr30-ibld.c:952 m32r-ibld.c:770
+#: fr30-ibld.c:947 m32r-ibld.c:809
#, c-format
msgid "Unrecognized field %d while decoding insn.\n"
msgstr ""
-#: fr30-ibld.c:1096 m32r-ibld.c:863
+#: fr30-ibld.c:1091 m32r-ibld.c:914
#, c-format
msgid "Unrecognized field %d while getting int operand.\n"
msgstr ""
-#: fr30-ibld.c:1225 m32r-ibld.c:941
+#: fr30-ibld.c:1220 m32r-ibld.c:1004
#, c-format
msgid "Unrecognized field %d while getting vma operand.\n"
msgstr ""
-#: fr30-ibld.c:1358 m32r-ibld.c:1023
+#: fr30-ibld.c:1349 m32r-ibld.c:1097
#, c-format
msgid "Unrecognized field %d while setting int operand.\n"
msgstr ""
-#: fr30-ibld.c:1484 m32r-ibld.c:1098
+#: fr30-ibld.c:1471 m32r-ibld.c:1183
#, c-format
msgid "Unrecognized field %d while setting vma operand.\n"
msgstr ""
msgid "unknown\t0x%04lx"
msgstr ""
-#: m10300-dis.c:546
+#: m10300-dis.c:680
#, c-format
msgid "unknown\t0x%04x"
msgstr ""
projects / binutils-gdb.git / commitdiff