#define MAX_REGISTER_VIRTUAL_SIZE FR30_REGSIZE
extern void fr30_pop_frame PARAMS ((void));
-/* XXX do we need the parameter ? */
#define POP_FRAME fr30_pop_frame()
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY {0}
+#define CALL_DUMMY_START_OFFSET (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION AT_ENTRY_POINT
+#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_ADDRESS() entry_point_address ()
+extern CORE_ADDR fr30_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+#define PUSH_RETURN_ADDRESS(PC, SP) fr30_push_return_address (PC, SP)
+
+
+#define PUSH_DUMMY_FRAME generic_push_dummy_frame ()
+
+
/* Number of bytes at start of arglist that are not really args. */
#define FRAME_ARGS_SKIP 0
extract_address (REGBUF + REGISTER_BYTE (RETVAL_REG), \
REGISTER_RAW_SIZE (RETVAL_REG))
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+ { write_register (RETVAL_REG, (ADDR)); }
+
+
#define FRAME_ARGS_ADDRESS(fi) (fi->frame)
#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
#define BREAKPOINT_INTNUM 9 /* one of the reserved traps */
#define BREAKPOINT {FR30_BREAKOP, BREAKPOINT_INTNUM}
+/* Define this for Wingdb */
+#define TARGET_FR30
-
-
-
-
-
-
-#if(0) /* Z.R. */
-
-ARM example
-
-#ifdef __STDC__ /* Forward decls for prototypes */
-struct type;
-struct value;
-#endif
+#if(1) /* Z.R. */
-#define TARGET_BYTE_ORDER_SELECTABLE
+/*ARM example*/
/* IEEE format floating point */
-
#define IEEE_FLOAT
-/* FIXME: may need a floatformat_ieee_double_bigbyte_littleword format for
- BIG_ENDIAN use. -fnf */
-
-#define TARGET_DOUBLE_FORMAT (target_byte_order == BIG_ENDIAN \
- ? &floatformat_ieee_double_big \
- : &floatformat_ieee_double_littlebyte_bigword)
-
-/* When reading symbols, we need to zap the low bit of the address, which
- may be set to 1 for Thumb functions. */
-
-#define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x1)
-
-/* Remove useless bits from addresses in a running program. */
-
-CORE_ADDR arm_addr_bits_remove PARAMS ((CORE_ADDR));
-
-#define ADDR_BITS_REMOVE(val) (arm_addr_bits_remove (val))
-
-/* Offset from address of function to start of its code.
- Zero on most machines. */
-
-#define FUNCTION_START_OFFSET 0
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-extern CORE_ADDR arm_skip_prologue PARAMS ((CORE_ADDR pc));
-
-#define SKIP_PROLOGUE(pc) { pc = arm_skip_prologue (pc); }
-
-/* Immediately after a function call, return the saved pc.
- Can't always go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-#define SAVED_PC_AFTER_CALL(frame) arm_saved_pc_after_call (frame)
-struct frame_info;
-extern CORE_ADDR arm_saved_pc_after_call PARAMS ((struct frame_info *));
-
-/* I don't know the real values for these. */
-#define TARGET_UPAGES UPAGES
-#define TARGET_NBPG NBPG
-
-/* Address of end of stack space. */
-
-#define STACK_END_ADDR (0x01000000 - (TARGET_UPAGES * TARGET_NBPG))
-
-/* Stack grows downward. */
-
-#define INNER_THAN <
-
-/* Sequence of bytes for breakpoint instruction. */
-
-/* !!!! if we're using RDP, then we're inserting breakpoints and storing
- their handles instread of what was in memory. It is nice that
- this is the same size as a handle - otherwise remote-rdp will
- have to change. */
-
-#define ARM_LE_BREAKPOINT {0x00,0x00,0x18,0xef} /* BKPT_SWI from <sys/ptrace.h> */
-#define ARM_BE_BREAKPOINT {0xef,0x18,0x00,0x00} /* BKPT_SWI from <sys/ptrace.h> */
-#define THUMB_LE_BREAKPOINT {0x18,0xdf} /* swi 24 */
-#define THUMB_BE_BREAKPOINT {0xdf,0x18} /* swi 24 */
-
-/* The following has been superseded by BREAKPOINT_FOR_PC, but
- is defined merely to keep mem-break.c happy. */
-#define LITTLE_BREAKPOINT ARM_LE_BREAKPOINT
-#define BIG_BREAKPOINT ARM_BE_BREAKPOINT
-
-/* BREAKPOINT_FROM_PC uses the program counter value to determine whether a
- 16- or 32-bit breakpoint should be used. It returns a pointer
- to a string of bytes that encode a breakpoint instruction, stores
- the length of the string to *lenptr, and adjusts the pc (if necessary) to
- point to the actual memory location where the breakpoint should be
- inserted. */
-
-unsigned char * arm_breakpoint_from_pc PARAMS ((CORE_ADDR * pcptr, int * lenptr));
-#define BREAKPOINT_FROM_PC(pcptr, lenptr) arm_breakpoint_from_pc (pcptr, lenptr)
-
-/* Amount PC must be decremented by after a breakpoint.
- This is often the number of bytes in BREAKPOINT
- but not always. */
-
-#define DECR_PC_AFTER_BREAK 0
-
-/* Nonzero if instruction at PC is a return instruction. */
-
-#define ABOUT_TO_RETURN(pc) \
- ((read_memory_integer(pc, 4) & 0x0fffffff == 0x01b0f00e) || \
- (read_memory_integer(pc, 4) & 0x0ffff800 == 0x09eba800))
-
-/* code to execute to print interesting information about the
- * floating point processor (if any)
- * No need to define if there is nothing to do.
- */
-#define FLOAT_INFO { arm_float_info (); }
-
-/* Say how long (ordinary) registers are. This is a piece of bogosity
- used in push_word and a few other places; REGISTER_RAW_SIZE is the
- real way to know how big a register is. */
-
-#define REGISTER_SIZE 4
-
-/* Number of machine registers */
-
-/* Note: I make a fake copy of the pc in register 25 (calling it ps) so
- that I can clear the status bits from pc (register 15) */
-
-#define NUM_REGS 26
-
-/* Initializer for an array of names of registers.
- There should be NUM_REGS strings in this initializer. */
-
-#define ORIGINAL_REGISTER_NAMES \
-{ "a1", "a2", "a3", "a4", /* 0 1 2 3 */ \
- "v1", "v2", "v3", "v4", /* 4 5 6 7 */ \
- "v5", "v6", "sl", "fp", /* 8 9 10 11 */ \
- "ip", "sp", "lr", "pc", /* 12 13 14 15 */ \
- "f0", "f1", "f2", "f3", /* 16 17 18 19 */ \
- "f4", "f5", "f6", "f7", /* 20 21 22 23 */ \
- "fps","ps" } /* 24 25 */
-
-/* These names are the ones which gcc emits, and
- I find them less confusing. Toggle between them
- using the `othernames' command. */
-
-#define ADDITIONAL_REGISTER_NAMES \
-{ "r0", "r1", "r2", "r3", /* 0 1 2 3 */ \
- "r4", "r5", "r6", "r7", /* 4 5 6 7 */ \
- "r8", "r9", "sl", "fp", /* 8 9 10 11 */ \
- "ip", "sp", "lr", "pc", /* 12 13 14 15 */ \
- "f0", "f1", "f2", "f3", /* 16 17 18 19 */ \
- "f4", "f5", "f6", "f7", /* 20 21 22 23 */ \
- "fps","ps" } /* 24 25 */
-
-#define REGISTER_NAMES ADDITIONAL_REGISTER_NAMES
-#ifndef REGISTER_NAMES
-#define REGISTER_NAMES ORIGINAL_REGISTER_NAMES
-#endif
-
-/* Register numbers of various important registers.
- Note that some of these values are "real" register numbers,
- and correspond to the general registers of the machine,
- and some are "phony" register numbers which are too large
- to be actual register numbers as far as the user is concerned
- but do serve to get the desired values when passed to read_register. */
-
-#define A1_REGNUM 0 /* first integer-like argument */
-#define A4_REGNUM 3 /* last integer-like argument */
-#define AP_REGNUM 11
-#define FP_REGNUM 11 /* Contains address of executing stack frame */
-#define SP_REGNUM 13 /* Contains address of top of stack */
-#define LR_REGNUM 14 /* address to return to from a function call */
-#define PC_REGNUM 15 /* Contains program counter */
-#define F0_REGNUM 16 /* first floating point register */
-#define F3_REGNUM 19 /* last floating point argument register */
-#define F7_REGNUM 23 /* last floating point register */
-#define FPS_REGNUM 24 /* floating point status register */
-#define PS_REGNUM 25 /* Contains processor status */
-
-#define THUMB_FP_REGNUM 7 /* R7 is frame register on Thumb */
-
-#define ARM_NUM_ARG_REGS 4
-#define ARM_LAST_ARG_REGNUM A4_REGNUM
-#define ARM_NUM_FP_ARG_REGS 4
-#define ARM_LAST_FP_ARG_REGNUM F3_REGNUM
-
-/* Instruction condition field values. */
-#define INST_EQ 0x0
-#define INST_NE 0x1
-#define INST_CS 0x2
-#define INST_CC 0x3
-#define INST_MI 0x4
-#define INST_PL 0x5
-#define INST_VS 0x6
-#define INST_VC 0x7
-#define INST_HI 0x8
-#define INST_LS 0x9
-#define INST_GE 0xa
-#define INST_LT 0xb
-#define INST_GT 0xc
-#define INST_LE 0xd
-#define INST_AL 0xe
-#define INST_NV 0xf
-
-#define FLAG_N 0x80000000
-#define FLAG_Z 0x40000000
-#define FLAG_C 0x20000000
-#define FLAG_V 0x10000000
-
-
-
-/* Total amount of space needed to store our copies of the machine's
- register state, the array `registers'. */
-#define REGISTER_BYTES (16*4 + 12*8 + 4 + 4)
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) (((N) < F0_REGNUM) ? (N)*4 : \
- (((N) < PS_REGNUM) ? 16*4 + ((N) - 16)*12 : \
- 16*4 + 8*12 + ((N) - FPS_REGNUM) * 4))
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On the vax, all regs are 4 bytes. */
-
-#define REGISTER_RAW_SIZE(N) (((N) < F0_REGNUM || (N) >= FPS_REGNUM) ? 4 : 12)
-
-/* Number of bytes of storage in the program's representation
- for register N. On the vax, all regs are 4 bytes. */
-
-#define REGISTER_VIRTUAL_SIZE(N) (((N) < F0_REGNUM || (N) >= FPS_REGNUM) ? 4 : 8)
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 12
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 8
-
-/* Nonzero if register N requires conversion
- from raw format to virtual format. */
-#define REGISTER_CONVERTIBLE(N) ((unsigned)(N) - F0_REGNUM < 8)
-
-/* Convert data from raw format for register REGNUM in buffer FROM
- to virtual format with type TYPE in buffer TO. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
-{ \
- double val; \
- convert_from_extended ((FROM), & val); \
- store_floating ((TO), TYPE_LENGTH (TYPE), val); \
-}
-
-/* Convert data from virtual format with type TYPE in buffer FROM
- to raw format for register REGNUM in buffer TO. */
-
-#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
-{ \
- double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
- convert_to_extended (&val, (TO)); \
-}
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-
-#define REGISTER_VIRTUAL_TYPE(N) \
- (((unsigned)(N) - F0_REGNUM) < 8 ? builtin_type_double : builtin_type_int)
-\f
-/* The system C compiler uses a similar structure return convention to gcc */
-
-#define USE_STRUCT_CONVENTION(gcc_p, type) (TYPE_LENGTH (type) > 4)
-
-/* Store the address of the place in which to copy the structure the
- subroutine will return. This is called from call_function. */
-
-#define STORE_STRUCT_RETURN(ADDR, SP) \
- { write_register (0, (ADDR)); }
-
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \
- convert_from_extended (REGBUF + REGISTER_BYTE (F0_REGNUM), VALBUF); \
- else \
- memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE))
-
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format. */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) { \
- char _buf[MAX_REGISTER_RAW_SIZE]; \
- convert_to_extended (VALBUF, _buf); \
- write_register_bytes (REGISTER_BYTE (F0_REGNUM), _buf, MAX_REGISTER_RAW_SIZE); \
- } else \
- write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
-
-/* Specify that for the native compiler variables for a particular
- lexical context are listed after the beginning LBRAC instead of
- before in the executables list of symbols. */
-#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (!(gcc_p))
-
-\f
-/* Define other aspects of the stack frame.
- We keep the offsets of all saved registers, 'cause we need 'em a lot!
- We also keep the current size of the stack frame, and the offset of
- the frame pointer from the stack pointer (for frameless functions, and
- when we're still in the prologue of a function with a frame) */
-
-#define EXTRA_FRAME_INFO \
- struct frame_saved_regs fsr; \
- int framesize; \
- int frameoffset; \
- int framereg;
-
-extern void arm_init_extra_frame_info PARAMS ((struct frame_info *fi));
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) arm_init_extra_frame_info (fi)
-
-/* Return the frame address. On ARM, it is R11; on Thumb it is R7. */
-CORE_ADDR arm_target_read_fp PARAMS ((void));
-#define TARGET_READ_FP() arm_target_read_fp ()
-
-/* Describe the pointer in each stack frame to the previous stack frame
- (its caller). */
-
-/* FRAME_CHAIN takes a frame's nominal address
- and produces the frame's chain-pointer.
-
- However, if FRAME_CHAIN_VALID returns zero,
- it means the given frame is the outermost one and has no caller. */
-
-#define FRAME_CHAIN(thisframe) (CORE_ADDR) arm_frame_chain (thisframe)
-extern CORE_ADDR arm_frame_chain PARAMS ((struct frame_info *));
-
-#define LOWEST_PC 0x20 /* the first 0x20 bytes are the trap vectors. */
-
-#define FRAME_CHAIN_VALID(chain, thisframe) \
- (chain != 0 && (FRAME_SAVED_PC (thisframe) >= LOWEST_PC))
-
/* Define other aspects of the stack frame. */
/* A macro that tells us whether the function invocation represented
(FRAMELESS) = (after_prologue == func_start); \
}
-/* Saved Pc. */
-
-#define FRAME_SAVED_PC(FRAME) arm_frame_saved_pc (FRAME)
-extern CORE_ADDR arm_frame_saved_pc PARAMS ((struct frame_info *));
-
-#define FRAME_ARGS_ADDRESS(fi) (fi->frame)
-
-#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
-
-/* Return number of args passed to a frame.
- Can return -1, meaning no way to tell. */
-
-#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1)
-
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 0
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
-
-struct frame_saved_regs;
-struct frame_info;
-void frame_find_saved_regs PARAMS((struct frame_info *fi,
- struct frame_saved_regs *fsr));
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
- arm_frame_find_saved_regs (frame_info, &(frame_saved_regs));
-
-\f
-/* Things needed for making the inferior call functions. */
-
-#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
- sp = arm_push_arguments ((nargs), (args), (sp), (struct_return), (struct_addr))
-extern CORE_ADDR
-arm_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
-
-/* Push an empty stack frame, to record the current PC, etc. */
-
-void arm_push_dummy_frame PARAMS ((void));
-
-#define PUSH_DUMMY_FRAME arm_push_dummy_frame ()
-
-/* Discard from the stack the innermost frame, restoring all registers. */
-
-void arm_pop_frame PARAMS ((void));
-
-#define POP_FRAME arm_pop_frame ()
-
-/* This sequence of words is the instructions
-
- mov lr,pc
- mov pc,r4
- swi bkpt_swi
-
- Note this is 12 bytes. */
-
-#define CALL_DUMMY {0xe1a0e00f, 0xe1a0f004, 0xef180000}
-
-#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */
-
-#define CALL_DUMMY_BREAKPOINT_OFFSET arm_call_dummy_breakpoint_offset()
-extern int arm_call_dummy_breakpoint_offset PARAMS ((void));
-
-/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME. */
-
-#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
- arm_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
-
-void arm_fix_call_dummy PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun,
- int nargs, struct value **args,
- struct type *type, int gcc_p));
-
-CORE_ADDR arm_get_next_pc PARAMS ((CORE_ADDR));
-
-/* Functions for dealing with Thumb call thunks. */
-#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) arm_in_call_stub (pc, name)
-#define SKIP_TRAMPOLINE_CODE(pc) arm_skip_stub (pc)
-extern int arm_in_call_stub PARAMS ((CORE_ADDR pc, char *name));
-extern CORE_ADDR arm_skip_stub PARAMS ((CORE_ADDR pc));
-
-/* Function to determine whether MEMADDR is in a Thumb function. */
-extern int arm_pc_is_thumb PARAMS ((bfd_vma memaddr));
-
-/* Function to determine whether MEMADDR is in a call dummy called from
- a Thumb function. */
-extern int arm_pc_is_thumb_dummy PARAMS ((bfd_vma memaddr));
-
-/* Macros for setting and testing a bit in a minimal symbol that
- marks it as Thumb function. The MSB of the minimal symbol's
- "info" field is used for this purpose. This field is already
- being used to store the symbol size, so the assumption is
- that the symbol size cannot exceed 2^31.
-
- COFF_MAKE_MSYMBOL_SPECIAL
- ELF_MAKE_MSYMBOL_SPECIAL tests whether the COFF or ELF symbol corresponds
- to a thumb function, and sets a "special" bit in a
- minimal symbol to indicate that it does
- MSYMBOL_SET_SPECIAL actually sets the "special" bit
- MSYMBOL_IS_SPECIAL tests the "special" bit in a minimal symbol
- MSYMBOL_SIZE returns the size of the minimal symbol, i.e.
- the "info" field with the "special" bit masked out
-*/
-
-extern int coff_sym_is_thumb(int val);
-#define MSYMBOL_SET_SPECIAL(msym) \
- MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) | 0x80000000)
-#define MSYMBOL_IS_SPECIAL(msym) \
- (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0)
-#define MSYMBOL_SIZE(msym) \
- ((long) MSYMBOL_INFO (msym) & 0x7fffffff)
-
-/* Thumb symbol are of type STT_LOPROC, (synonymous with STT_ARM_TFUNC) */
-#define ELF_MAKE_MSYMBOL_SPECIAL(sym,msym) \
- { if(ELF_ST_TYPE(((elf_symbol_type *)(sym))->internal_elf_sym.st_info) == STT_LOPROC) \
- MSYMBOL_SET_SPECIAL(msym); }
-
-#define COFF_MAKE_MSYMBOL_SPECIAL(val,msym) \
- { if(coff_sym_is_thumb(val)) MSYMBOL_SET_SPECIAL(msym); }
-
-
-V850 example
-
-
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-
-#define NUM_REGS 66
-
-#define REGISTER_NAMES \
-{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
- "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
- "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \
- "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \
- \
- "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7", \
- "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15", \
- "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23", \
- "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31", \
- \
- "pc", "fp" }
-
-#define REGISTER_BYTES (NUM_REGS * 4)
-
-#define REGISTER_SIZE 4
-#define MAX_REGISTER_RAW_SIZE 4
-
-#define R0_REGNUM 0
-#define R1_REGNUM 1
-#define SAVE1_START_REGNUM 2
-#define SAVE1_END_REGNUM 2
-#define SP_REGNUM 3
-#define ARG0_REGNUM 6
-#define ARGLAST_REGNUM 9
-#define V0_REGNUM 10
-#define V1_REGNUM 11
-#define R12_REGNUM 12
-#define SAVE2_START_REGNUM 20
-#define SAVE2_END_REGNUM 29
-#define EP_REGNUM 30
-#define SAVE3_START_REGNUM 31
-#define SAVE3_END_REGNUM 31
-#define RP_REGNUM 31
-#define PS_REGNUM 37
-#define PC_REGNUM 64
-#define FP_REGNUM 65
-#define FP_RAW_REGNUM 29
-
-#define TARGET_READ_FP() read_register (FP_RAW_REGNUM)
-#define TARGET_WRITE_FP(VAL) write_register (FP_REGNUM, (VAL))
-
-#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int
-
-#define REGISTER_BYTE(REG) ((REG) * 4)
-#define REGISTER_VIRTUAL_SIZE(REG) 4
-#define REGISTER_RAW_SIZE(REG) 4
-
-#define MAX_REGISTER_VIRTUAL_SIZE 4
-
-#define BREAKPOINT {0x40, 0xF8} /* little-ended */
-
-#define FUNCTION_START_OFFSET 0
-
-#define DECR_PC_AFTER_BREAK 0
-
-#define INNER_THAN <
-
-#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM)
-
-#ifdef __STDC__
-struct frame_info;
-struct frame_saved_regs;
-struct type;
-struct value;
-#endif
-
-#define EXTRA_FRAME_INFO struct frame_saved_regs fsr;
+/*V850 example*/
extern void fr30_init_extra_frame_info PARAMS ((struct frame_info *fi));
#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) fr30_init_extra_frame_info (fi)
-#define INIT_FRAME_PC /* Not necessary */
-extern void fr30_frame_find_saved_regs PARAMS ((struct frame_info *fi, struct frame_saved_regs *regaddr));
-#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr
-
-extern CORE_ADDR fr30_frame_chain PARAMS ((struct frame_info *fi));
-#define FRAME_CHAIN(fi) fr30_frame_chain (fi)
#define FRAME_CHAIN_VALID(FP, FI) generic_frame_chain_valid (FP, FI)
-extern CORE_ADDR fr30_find_callers_reg PARAMS ((struct frame_info *fi, int regnum));
-extern CORE_ADDR fr30_frame_saved_pc PARAMS ((struct frame_info *));
-#define FRAME_SAVED_PC(FI) (fr30_frame_saved_pc (FI))
-
-#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \
- memcpy (VALBUF, REGBUF + REGISTER_BYTE (V0_REGNUM), TYPE_LENGTH (TYPE))
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
- extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \
- REGISTER_RAW_SIZE (V0_REGNUM))
-
-#define STORE_RETURN_VALUE(TYPE, VALBUF) \
- write_register_bytes(REGISTER_BYTE (V0_REGNUM), VALBUF, TYPE_LENGTH (TYPE));
-
-extern CORE_ADDR fr30_skip_prologue PARAMS ((CORE_ADDR pc));
-#define SKIP_PROLOGUE(pc) pc = fr30_skip_prologue (pc)
-
-#define FRAME_ARGS_SKIP 0
-
-#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
-#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
-#define FRAME_NUM_ARGS(val, fi) ((val) = -1)
-
-extern void fr30_pop_frame PARAMS ((void));
-#define POP_FRAME fr30_pop_frame()
-
-#define USE_GENERIC_DUMMY_FRAMES
-#define CALL_DUMMY {0}
-#define CALL_DUMMY_START_OFFSET (0)
-#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
-#define CALL_DUMMY_LOCATION AT_ENTRY_POINT
-#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
-#define CALL_DUMMY_ADDRESS() entry_point_address ()
-extern CORE_ADDR fr30_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
-#define PUSH_RETURN_ADDRESS(PC, SP) fr30_push_return_address (PC, SP)
-
-
-#define PUSH_DUMMY_FRAME generic_push_dummy_frame ()
-
extern CORE_ADDR
fr30_push_arguments PARAMS ((int nargs, struct value **args, CORE_ADDR sp,
- unsigned char struct_return,
+ int struct_return,
CORE_ADDR struct_addr));
#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
(SP) = fr30_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
-#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP)
-
-
#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
#define USE_STRUCT_CONVENTION(GCC_P, TYPE) \
(TYPE_NFIELDS (TYPE) > 1 || TYPE_LENGTH (TYPE) > 4)
-/* override the default get_saved_register function with
- one that takes account of generic CALL_DUMMY frames */
-#define GET_SAVED_REGISTER
-
-/* Define this for Wingdb */
-
-#define TARGET_FR30
-
#endif /* Z.R. */
projects / binutils-gdb.git / commitdiff