;;- Machine description for SPARC chip for GNU C compiler
-;; Copyright (C) 1987, 1988, 1989, 1992, 1993 Free Software Foundation, Inc.
+;; Copyright (C) 1987, 88, 89, 92, 93, 1994 Free Software Foundation, Inc.
;; Contributed by Michael Tiemann (tiemann@cygnus.com)
+;; 64 bit SPARC V9 support by Michael Tiemann, Jim Wilson, and Doug Evans,
+;; at Cygnus Support.
;; This file is part of GNU CC.
;;- See file "rtl.def" for documentation on define_insn, match_*, et. al.
+;; cpu type. Cpu32bit includes v7, sparclite, v8.
+
+(define_attr "cpu" "cpu32bit,cpu64bit"
+ (const (symbol_ref "sparc_cpu_type")))
+
;; Insn type. Used to default other attribute values.
;; type "unary" insns have one input operand (1) and one output operand (0)
;; type "call_no_delay_slot" is a call followed by an unimp instruction.
(define_attr "type"
- "move,unary,binary,compare,load,store,uncond_branch,branch,call,call_no_delay_slot,address,fpload,fpstore,fp,fpcmp,fpmul,fpdiv,fpsqrt,multi,misc"
+ "move,unary,binary,compare,load,store,uncond_branch,branch,call,call_no_delay_slot,address,fpload,fpstore,fp,fpcmp,fpmul,fpdiv,fpsqrt,cmove,multi,misc"
(const_string "binary"))
;; Set true if insn uses call-clobbered intermediate register.
;; const0_rtx, we want to compute the xor of the two operands and test
;; it against zero.
;;
-;; We start with the DEFINE_EXPANDs, then then DEFINE_INSNs to match
+;; We start with the DEFINE_EXPANDs, then the DEFINE_INSNs to match
;; the patterns. Finally, we have the DEFINE_SPLITs for some of the scc
;; insns that actually require more than one machine instruction.
DONE;
}")
+(define_expand "cmpdi"
+ [(set (reg:CCX 0)
+ (compare:CCX (match_operand:DI 0 "register_operand" "")
+ (match_operand:DI 1 "arith_double_operand" "")))]
+ "TARGET_V9"
+ "
+{
+ sparc_compare_op0 = operands[0];
+ sparc_compare_op1 = operands[1];
+ DONE;
+}")
+
(define_expand "cmpsf"
[(set (reg:CCFP 0)
(compare:CCFP (match_operand:SF 0 "register_operand" "")
}")
;; Next come the scc insns. For seq, sne, sgeu, and sltu, we can do this
-;; without jumps using the addx/subx instructions. For the rest, we do
-;; branches. Seq_special and sne_special clobber the CC reg, because they
+;; without jumps using the addx/subx instructions. For seq/sne on v9 we use
+;; the same code as v8 (the addx/subx method has more applications). The
+;; exception to this is "reg != 0" which can be done in one instruction on v9
+;; (so we do it). For the rest, on v9 we use conditional moves; on v8, we do
+;; branches.
+
+;; Seq_special[_xxx] and sne_special[_xxx] clobber the CC reg, because they
;; generate addcc/subcc instructions.
-(define_expand "seq_special"
- [(set (match_dup 3) (xor:SI (match_operand:SI 1 "register_operand" "")
- (match_operand:SI 2 "register_operand" "")))
+(define_expand "seqsi_special"
+ [(set (match_dup 3)
+ (xor:SI (match_operand:SI 1 "register_operand" "")
+ (match_operand:SI 2 "register_operand" "")))
(parallel [(set (match_operand:SI 0 "register_operand" "")
(eq:SI (match_dup 3) (const_int 0)))
(clobber (reg:CC 0))])]
-
""
"{ operands[3] = gen_reg_rtx (SImode); }")
-(define_expand "sne_special"
- [(set (match_dup 3) (xor:SI (match_operand:SI 1 "register_operand" "")
- (match_operand:SI 2 "register_operand" "")))
+(define_expand "seqdi_special"
+ [(set (match_dup 3)
+ (xor:DI (match_operand:DI 1 "register_operand" "")
+ (match_operand:DI 2 "register_operand" "")))
+ (parallel [(set (match_operand:DI 0 "register_operand" "")
+ (eq:DI (match_dup 3) (const_int 0)))
+ (clobber (reg:CCX 0))])]
+ ""
+ "{ operands[3] = gen_reg_rtx (DImode); }")
+
+(define_expand "snesi_special"
+ [(set (match_dup 3)
+ (xor:SI (match_operand:SI 1 "register_operand" "")
+ (match_operand:SI 2 "register_operand" "")))
(parallel [(set (match_operand:SI 0 "register_operand" "")
(ne:SI (match_dup 3) (const_int 0)))
(clobber (reg:CC 0))])]
""
"{ operands[3] = gen_reg_rtx (SImode); }")
+(define_expand "snedi_special"
+ [(set (match_dup 3)
+ (xor:DI (match_operand:DI 1 "register_operand" "")
+ (match_operand:DI 2 "register_operand" "")))
+ (parallel [(set (match_operand:DI 0 "register_operand" "")
+ (ne:DI (match_dup 3) (const_int 0)))
+ (clobber (reg:CCX 0))])]
+ ""
+ "{ operands[3] = gen_reg_rtx (DImode); }")
+
+(define_expand "seqdi_special_trunc"
+ [(set (match_dup 3)
+ (xor:DI (match_operand:DI 1 "register_operand" "")
+ (match_operand:DI 2 "register_operand" "")))
+ (parallel [(set (match_operand:SI 0 "register_operand" "")
+ (eq:SI (subreg:SI (match_dup 3) 0) (const_int 0)))
+ (clobber (reg:CC 0))])]
+ ""
+ "{ operands[3] = gen_reg_rtx (DImode); }")
+
+(define_expand "snedi_special_trunc"
+ [(set (match_dup 3)
+ (xor:DI (match_operand:DI 1 "register_operand" "")
+ (match_operand:DI 2 "register_operand" "")))
+ (parallel [(set (match_operand:SI 0 "register_operand" "")
+ (ne:SI (subreg:SI (match_dup 3) 0) (const_int 0)))
+ (clobber (reg:CC 0))])]
+ ""
+ "{ operands[3] = gen_reg_rtx (DImode); }")
+
+(define_expand "seqsi_special_extend"
+ [(set (subreg:SI (match_dup 3) 0)
+ (xor:SI (match_operand:SI 1 "register_operand" "")
+ (match_operand:SI 2 "register_operand" "")))
+ (parallel [(set (match_operand:DI 0 "register_operand" "")
+ (eq:DI (match_dup 3) (const_int 0)))
+ (clobber (reg:CCX 0))])]
+ ""
+ "{ operands[3] = gen_reg_rtx (DImode); }")
+
+(define_expand "snesi_special_extend"
+ [(set (subreg:SI (match_dup 3) 0)
+ (xor:SI (match_operand:SI 1 "register_operand" "")
+ (match_operand:SI 2 "register_operand" "")))
+ (parallel [(set (match_operand:DI 0 "register_operand" "")
+ (ne:DI (match_dup 3) (const_int 0)))
+ (clobber (reg:CCX 0))])]
+ ""
+ "{ operands[3] = gen_reg_rtx (DImode); }")
+
+;; ??? v9: Operand 0 needs a mode, so SImode was chosen.
+;; However, the code handles both SImode and DImode.
(define_expand "seq"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(eq:SI (match_dup 1) (const_int 0)))]
""
"
{
if (GET_MODE (sparc_compare_op0) == SImode)
{
- emit_insn (gen_seq_special (operands[0], sparc_compare_op0,
- sparc_compare_op1));
+ rtx pat;
+
+ if (GET_MODE (operands[0]) == SImode)
+ pat = gen_seqsi_special (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ else if (! TARGET_V9)
+ FAIL;
+ else
+ pat = gen_seqsi_special_extend (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ emit_insn (pat);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == DImode)
+ {
+ rtx pat;
+
+ if (GET_MODE (operands[0]) == SImode)
+ pat = gen_seqdi_special_trunc (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ else if (! TARGET_V9)
+ FAIL;
+ else
+ pat = gen_seqdi_special (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ emit_insn (pat);
DONE;
}
else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
emit_insn (gen_sne (operands[0]));
DONE;
}
- else
- operands[1] = gen_compare_reg (EQ, sparc_compare_op0, sparc_compare_op1);
+ else if (TARGET_V9)
+ {
+ if (gen_v9_scc (EQ, operands))
+ DONE;
+ /* fall through */
+ }
+ operands[1] = gen_compare_reg (EQ, sparc_compare_op0, sparc_compare_op1);
}")
+;; ??? v9: Operand 0 needs a mode, so SImode was chosen.
+;; However, the code handles both SImode and DImode.
(define_expand "sne"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(ne:SI (match_dup 1) (const_int 0)))]
""
"
{
if (GET_MODE (sparc_compare_op0) == SImode)
{
- emit_insn (gen_sne_special (operands[0], sparc_compare_op0,
- sparc_compare_op1));
+ rtx pat;
+
+ if (GET_MODE (operands[0]) == SImode)
+ pat = gen_snesi_special (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ else if (! TARGET_V9)
+ FAIL;
+ else
+ pat = gen_snesi_special_extend (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ emit_insn (pat);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == DImode)
+ {
+ rtx pat;
+
+ if (GET_MODE (operands[0]) == SImode)
+ pat = gen_snedi_special_trunc (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ else if (! TARGET_V9)
+ FAIL;
+ else
+ pat = gen_snedi_special (operands[0], sparc_compare_op0,
+ sparc_compare_op1);
+ emit_insn (pat);
DONE;
}
else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
emit_insn (gen_sne (operands[0]));
DONE;
}
- else
- operands[1] = gen_compare_reg (NE, sparc_compare_op0, sparc_compare_op1);
+ else if (TARGET_V9)
+ {
+ if (gen_v9_scc (NE, operands))
+ DONE;
+ /* fall through */
+ }
+ operands[1] = gen_compare_reg (NE, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sgt"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(gt:SI (match_dup 1) (const_int 0)))]
""
"
emit_insn (gen_sne (operands[0]));
DONE;
}
+ else if (TARGET_V9)
+ {
+ if (gen_v9_scc (GT, operands))
+ DONE;
+ /* fall through */
+ }
operands[1] = gen_compare_reg (GT, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "slt"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(lt:SI (match_dup 1) (const_int 0)))]
""
"
emit_insn (gen_sne (operands[0]));
DONE;
}
+ else if (TARGET_V9)
+ {
+ if (gen_v9_scc (LT, operands))
+ DONE;
+ /* fall through */
+ }
operands[1] = gen_compare_reg (LT, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sge"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(ge:SI (match_dup 1) (const_int 0)))]
""
"
emit_insn (gen_sne (operands[0]));
DONE;
}
+ else if (TARGET_V9)
+ {
+ if (gen_v9_scc (GE, operands))
+ DONE;
+ /* fall through */
+ }
operands[1] = gen_compare_reg (GE, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sle"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(le:SI (match_dup 1) (const_int 0)))]
""
"
emit_insn (gen_sne (operands[0]));
DONE;
}
+ else if (TARGET_V9)
+ {
+ if (gen_v9_scc (LE, operands))
+ DONE;
+ /* fall through */
+ }
operands[1] = gen_compare_reg (LE, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sgtu"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(gtu:SI (match_dup 1) (const_int 0)))]
""
"
{
- rtx tem;
-
- /* We can do ltu easily, so if both operands are registers, swap them and
- do a LTU. */
- if ((GET_CODE (sparc_compare_op0) == REG
- || GET_CODE (sparc_compare_op0) == SUBREG)
- && (GET_CODE (sparc_compare_op1) == REG
- || GET_CODE (sparc_compare_op1) == SUBREG))
+ if (! TARGET_V9)
{
- tem = sparc_compare_op0;
- sparc_compare_op0 = sparc_compare_op1;
- sparc_compare_op1 = tem;
- emit_insn (gen_sltu (operands[0]));
- DONE;
+ rtx tem;
+
+ /* We can do ltu easily, so if both operands are registers, swap them and
+ do a LTU. */
+ if ((GET_CODE (sparc_compare_op0) == REG
+ || GET_CODE (sparc_compare_op0) == SUBREG)
+ && (GET_CODE (sparc_compare_op1) == REG
+ || GET_CODE (sparc_compare_op1) == SUBREG))
+ {
+ tem = sparc_compare_op0;
+ sparc_compare_op0 = sparc_compare_op1;
+ sparc_compare_op1 = tem;
+ emit_insn (gen_sltu (operands[0]));
+ DONE;
+ }
}
-
- operands[1] = gen_compare_reg (LEU, sparc_compare_op0, sparc_compare_op1);
+ else
+ {
+ if (gen_v9_scc (GTU, operands))
+ DONE;
+ }
+ operands[1] = gen_compare_reg (GTU, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sltu"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(ltu:SI (match_dup 1) (const_int 0)))]
""
"
-{ operands[1] = gen_compare_reg (LTU, sparc_compare_op0, sparc_compare_op1);
+{
+ if (TARGET_V9)
+ {
+ if (gen_v9_scc (LTU, operands))
+ DONE;
+ }
+ operands[1] = gen_compare_reg (LTU, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sgeu"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(geu:SI (match_dup 1) (const_int 0)))]
""
"
-{ operands[1] = gen_compare_reg (GEU, sparc_compare_op0, sparc_compare_op1);
+{
+ if (TARGET_V9)
+ {
+ if (gen_v9_scc (GEU, operands))
+ DONE;
+ }
+ operands[1] = gen_compare_reg (GEU, sparc_compare_op0, sparc_compare_op1);
}")
(define_expand "sleu"
- [(set (match_operand:SI 0 "register_operand" "")
+ [(set (match_operand:SI 0 "intreg_operand" "")
(leu:SI (match_dup 1) (const_int 0)))]
""
"
{
- rtx tem;
-
- /* We can do geu easily, so if both operands are registers, swap them and
- do a GEU. */
- if ((GET_CODE (sparc_compare_op0) == REG
- || GET_CODE (sparc_compare_op0) == SUBREG)
- && (GET_CODE (sparc_compare_op1) == REG
- || GET_CODE (sparc_compare_op1) == SUBREG))
+ if (! TARGET_V9)
{
- tem = sparc_compare_op0;
- sparc_compare_op0 = sparc_compare_op1;
- sparc_compare_op1 = tem;
- emit_insn (gen_sgeu (operands[0]));
- DONE;
+ rtx tem;
+
+ /* We can do geu easily, so if both operands are registers, swap them and
+ do a GEU. */
+ if ((GET_CODE (sparc_compare_op0) == REG
+ || GET_CODE (sparc_compare_op0) == SUBREG)
+ && (GET_CODE (sparc_compare_op1) == REG
+ || GET_CODE (sparc_compare_op1) == SUBREG))
+ {
+ tem = sparc_compare_op0;
+ sparc_compare_op0 = sparc_compare_op1;
+ sparc_compare_op1 = tem;
+ emit_insn (gen_sgeu (operands[0]));
+ DONE;
+ }
+ }
+ else
+ {
+ if (gen_v9_scc (LEU, operands))
+ DONE;
}
-
operands[1] = gen_compare_reg (LEU, sparc_compare_op0, sparc_compare_op1);
}")
(define_insn ""
[(set (reg:CCFPE 0)
- (compare:CCFPE (match_operand:DF 0 "register_operand" "f")
- (match_operand:DF 1 "register_operand" "f")))]
- "TARGET_FPU"
- "fcmped %0,%1"
+ (compare:CCFPE (match_operand:SF 0 "register_operand" "f")
+ (match_operand:SF 1 "register_operand" "f")))]
+ "! TARGET_V9 && TARGET_FPU"
+ "fcmpes %0,%1"
[(set_attr "type" "fpcmp")])
(define_insn ""
[(set (reg:CCFPE 0)
- (compare:CCFPE (match_operand:SF 0 "register_operand" "f")
- (match_operand:SF 1 "register_operand" "f")))]
- "TARGET_FPU"
- "fcmpes %0,%1"
+ (compare:CCFPE (match_operand:DF 0 "register_operand" "f")
+ (match_operand:DF 1 "register_operand" "f")))]
+ "! TARGET_V9 && TARGET_FPU"
+ "fcmped %0,%1"
[(set_attr "type" "fpcmp")])
(define_insn ""
[(set (reg:CCFPE 0)
(compare:CCFPE (match_operand:TF 0 "register_operand" "f")
(match_operand:TF 1 "register_operand" "f")))]
- "TARGET_FPU && TARGET_HARD_QUAD"
+ "! TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
"fcmpeq %0,%1"
[(set_attr "type" "fpcmp")])
(define_insn ""
[(set (reg:CCFP 0)
- (compare:CCFP (match_operand:DF 0 "register_operand" "f")
- (match_operand:DF 1 "register_operand" "f")))]
- "TARGET_FPU"
- "fcmpd %0,%1"
+ (compare:CCFP (match_operand:SF 0 "register_operand" "f")
+ (match_operand:SF 1 "register_operand" "f")))]
+ "! TARGET_V9 && TARGET_FPU"
+ "fcmps %0,%1"
[(set_attr "type" "fpcmp")])
(define_insn ""
[(set (reg:CCFP 0)
- (compare:CCFP (match_operand:SF 0 "register_operand" "f")
- (match_operand:SF 1 "register_operand" "f")))]
- "TARGET_FPU"
- "fcmps %0,%1"
+ (compare:CCFP (match_operand:DF 0 "register_operand" "f")
+ (match_operand:DF 1 "register_operand" "f")))]
+ "! TARGET_V9 && TARGET_FPU"
+ "fcmpd %0,%1"
[(set_attr "type" "fpcmp")])
(define_insn ""
[(set (reg:CCFP 0)
(compare:CCFP (match_operand:TF 0 "register_operand" "f")
(match_operand:TF 1 "register_operand" "f")))]
- "TARGET_FPU && TARGET_HARD_QUAD"
+ "! TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
"fcmpq %0,%1"
[(set_attr "type" "fpcmp")])
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX (match_operand:DI 0 "register_operand" "r")
+ (match_operand:DI 1 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "cmp %r0,%1"
+ [(set_attr "type" "compare")])
+
+(define_insn ""
+ [(set (match_operand:CCFPE 0 "ccfp_reg_operand" "=c")
+ (compare:CCFPE (match_operand:SF 1 "register_operand" "f")
+ (match_operand:SF 2 "register_operand" "f")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fcmpes %0,%1,%2"
+ [(set_attr "type" "fpcmp")])
+
+(define_insn ""
+ [(set (match_operand:CCFPE 0 "ccfp_reg_operand" "=c")
+ (compare:CCFPE (match_operand:DF 1 "register_operand" "f")
+ (match_operand:DF 2 "register_operand" "f")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fcmped %0,%1,%2"
+ [(set_attr "type" "fpcmp")])
+
+(define_insn ""
+ [(set (match_operand:CCFPE 0 "ccfp_reg_operand" "=c")
+ (compare:CCFPE (match_operand:TF 1 "register_operand" "f")
+ (match_operand:TF 2 "register_operand" "f")))]
+ "TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "fcmpeq %0,%1,%2"
+ [(set_attr "type" "fpcmp")])
+
+(define_insn ""
+ [(set (match_operand:CCFP 0 "ccfp_reg_operand" "=c")
+ (compare:CCFP (match_operand:SF 1 "register_operand" "f")
+ (match_operand:SF 2 "register_operand" "f")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fcmps %0,%1,%2"
+ [(set_attr "type" "fpcmp")])
+
+(define_insn ""
+ [(set (match_operand:CCFP 0 "ccfp_reg_operand" "=c")
+ (compare:CCFP (match_operand:DF 1 "register_operand" "f")
+ (match_operand:DF 2 "register_operand" "f")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fcmpd %0,%1,%2"
+ [(set_attr "type" "fpcmp")])
+
+(define_insn ""
+ [(set (match_operand:CCFP 0 "ccfp_reg_operand" "=c")
+ (compare:CCFP (match_operand:TF 1 "register_operand" "f")
+ (match_operand:TF 2 "register_operand" "f")))]
+ "TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "fcmpq %0,%1,%2"
+ [(set_attr "type" "fpcmp")])
+
;; The SEQ and SNE patterns are special because they can be done
;; without any branching and do not involve a COMPARE.
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
- (ne:SI (match_operand:SI 1 "register_operand" "r") (const_int 0)))
+ (ne:SI (match_operand:SI 1 "register_operand" "r")
+ (const_int 0)))
(clobber (reg:CC 0))]
""
"subcc %%g0,%1,%%g0\;addx %%g0,0,%0"
[(set_attr "type" "unary")
(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (ne:DI (match_operand:DI 1 "register_operand" "r")
+ (const_int 0)))
+ (clobber (reg:CCX 0))]
+ "TARGET_V9"
+ "mov 0,%0\;movrnz %1,1,%0"
+ [(set_attr "type" "unary")
+ (set_attr "length" "2")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (neg:DI (ne:DI (match_operand:DI 1 "register_operand" "r")
+ (const_int 0))))
+ (clobber (reg:CCX 0))]
+ "TARGET_V9"
+ "mov 0,%0\;movrnz %1,-1,%0"
+ [(set_attr "type" "unary")
+ (set_attr "length" "2")])
+
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
- (eq:SI (match_operand:SI 1 "register_operand" "r") (const_int 0)))
+ (eq:SI (match_operand:SI 1 "register_operand" "r")
+ (const_int 0)))
(clobber (reg:CC 0))]
""
"subcc %%g0,%1,%%g0\;subx %%g0,-1,%0"
[(set_attr "type" "unary")
(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (eq:DI (match_operand:DI 1 "register_operand" "r")
+ (const_int 0)))
+ (clobber (reg:CCX 0))]
+ "TARGET_V9"
+ "mov 0,%0\;movrz %1,1,%0"
+ [(set_attr "type" "unary")
+ (set_attr "length" "2")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (neg:DI (eq:DI (match_operand:DI 1 "register_operand" "r")
+ (const_int 0))))
+ (clobber (reg:CCX 0))]
+ "TARGET_V9"
+ "mov 0,%0\;movrz %1,-1,%0"
+ [(set_attr "type" "unary")
+ (set_attr "length" "2")])
+
;; We can also do (x + (i == 0)) and related, so put them in.
+;; ??? The addx/subx insns use the 32 bit carry flag so there are no DImode
+;; versions for v9.
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
"subcc %%g0,%1,%%g0\;addx %2,-1,%0"
[(set_attr "length" "2")])
-;; We can also do GEU and LTU directly, but these operate after a
-;; compare.
+;; We can also do GEU and LTU directly, but these operate after a compare.
+;; ??? The addx/subx insns use the 32 bit carry flag so there are no DImode
+;; versions for v9.
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
[(set_attr "type" "misc")])
;; We can also do (x + ((unsigned) i >= 0)) and related, so put them in.
+;; ??? The addx/subx insns use the 32 bit carry flag so there are no DImode
+;; versions for v9.
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
"addx %1,-1,%0"
[(set_attr "type" "unary")])
-;; Now we have the generic scc insns. These will be done using a jump.
+;; Now we have the generic scc insns.
+;; !v9: These will be done using a jump.
+;; v9: Use conditional moves which are defined elsewhere.
;; We have to exclude the cases above, since we will not want combine to
;; turn something that does not require a jump into something that does.
+
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
(match_operator:SI 1 "noov_compare_op" [(reg 0) (const_int 0)]))]
"* return output_scc_insn (operands, insn); "
[(set_attr "type" "multi")
(set_attr "length" "3")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (match_operator:DI 1 "noov_compare_op" [(reg 0) (const_int 0)]))]
+ "TARGET_V9"
+ "* return output_scc_insn (operands, insn); "
+ [(set_attr "type" "multi")
+ (set_attr "length" "3")])
\f
;; These control RTL generation for conditional jump insns
""
"
{
- if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
+ if (TARGET_V9 && sparc_compare_op1 == const0_rtx
+ && GET_CODE (sparc_compare_op0) == REG
+ && GET_MODE (sparc_compare_op0) == DImode)
+ {
+ emit_v9_brxx_insn (EQ, sparc_compare_op0, operands[0]);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
{
emit_float_lib_cmp (sparc_compare_op0, sparc_compare_op1, EQ);
- emit_insn (gen_bne (operands[0]));
+ emit_jump_insn (gen_bne (operands[0]));
DONE;
}
operands[1] = gen_compare_reg (EQ, sparc_compare_op0, sparc_compare_op1);
""
"
{
- if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
+ if (TARGET_V9 && sparc_compare_op1 == const0_rtx
+ && GET_CODE (sparc_compare_op0) == REG
+ && GET_MODE (sparc_compare_op0) == DImode)
+ {
+ emit_v9_brxx_insn (NE, sparc_compare_op0, operands[0]);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
{
emit_float_lib_cmp (sparc_compare_op0, sparc_compare_op1, NE);
- emit_insn (gen_bne (operands[0]));
+ emit_jump_insn (gen_bne (operands[0]));
DONE;
}
operands[1] = gen_compare_reg (NE, sparc_compare_op0, sparc_compare_op1);
""
"
{
- if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
+ if (TARGET_V9 && sparc_compare_op1 == const0_rtx
+ && GET_CODE (sparc_compare_op0) == REG
+ && GET_MODE (sparc_compare_op0) == DImode)
+ {
+ emit_v9_brxx_insn (GT, sparc_compare_op0, operands[0]);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
{
emit_float_lib_cmp (sparc_compare_op0, sparc_compare_op1, GT);
- emit_insn (gen_bne (operands[0]));
+ emit_jump_insn (gen_bne (operands[0]));
DONE;
}
operands[1] = gen_compare_reg (GT, sparc_compare_op0, sparc_compare_op1);
""
"
{
- if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
+ if (TARGET_V9 && sparc_compare_op1 == const0_rtx
+ && GET_CODE (sparc_compare_op0) == REG
+ && GET_MODE (sparc_compare_op0) == DImode)
+ {
+ emit_v9_brxx_insn (LT, sparc_compare_op0, operands[0]);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
{
emit_float_lib_cmp (sparc_compare_op0, sparc_compare_op1, LT);
- emit_insn (gen_bne (operands[0]));
+ emit_jump_insn (gen_bne (operands[0]));
DONE;
}
operands[1] = gen_compare_reg (LT, sparc_compare_op0, sparc_compare_op1);
""
"
{
- if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
+ if (TARGET_V9 && sparc_compare_op1 == const0_rtx
+ && GET_CODE (sparc_compare_op0) == REG
+ && GET_MODE (sparc_compare_op0) == DImode)
+ {
+ emit_v9_brxx_insn (GE, sparc_compare_op0, operands[0]);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
{
emit_float_lib_cmp (sparc_compare_op0, sparc_compare_op1, GE);
- emit_insn (gen_bne (operands[0]));
+ emit_jump_insn (gen_bne (operands[0]));
DONE;
}
operands[1] = gen_compare_reg (GE, sparc_compare_op0, sparc_compare_op1);
""
"
{
- if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
+ if (TARGET_V9 && sparc_compare_op1 == const0_rtx
+ && GET_CODE (sparc_compare_op0) == REG
+ && GET_MODE (sparc_compare_op0) == DImode)
+ {
+ emit_v9_brxx_insn (LE, sparc_compare_op0, operands[0]);
+ DONE;
+ }
+ else if (GET_MODE (sparc_compare_op0) == TFmode && ! TARGET_HARD_QUAD)
{
emit_float_lib_cmp (sparc_compare_op0, sparc_compare_op1, LE);
- emit_insn (gen_bne (operands[0]));
+ emit_jump_insn (gen_bne (operands[0]));
DONE;
}
operands[1] = gen_compare_reg (LE, sparc_compare_op0, sparc_compare_op1);
""
"*
{
- return output_cbranch (operands[0], 1, 0,
+ return output_cbranch (operands[0], 0, 1, 0,
final_sequence && INSN_ANNULLED_BRANCH_P (insn),
! final_sequence);
}"
""
"*
{
- return output_cbranch (operands[0], 1, 1,
+ return output_cbranch (operands[0], 0, 1, 1,
final_sequence && INSN_ANNULLED_BRANCH_P (insn),
! final_sequence);
}"
[(set_attr "type" "branch")])
-\f
-;; Move instructions
-(define_expand "movqi"
- [(set (match_operand:QI 0 "general_operand" "")
- (match_operand:QI 1 "general_operand" ""))]
- ""
- "
+(define_insn ""
+ [(set (pc)
+ (if_then_else (match_operator 0 "comparison_operator"
+ [(match_operand:CCFP 1 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (label_ref (match_operand 2 "" ""))
+ (pc)))]
+ "TARGET_V9"
+ "*
{
- if (emit_move_sequence (operands, QImode))
- DONE;
-}")
+ return output_cbranch (operands[0], operands[1], 2, 0,
+ final_sequence && INSN_ANNULLED_BRANCH_P (insn),
+ ! final_sequence);
+}"
+ [(set_attr "type" "branch")])
(define_insn ""
- [(set (match_operand:QI 0 "reg_or_nonsymb_mem_operand" "=r,r,r,Q")
- (match_operand:QI 1 "move_operand" "rI,K,Q,rJ"))]
- "register_operand (operands[0], QImode)
- || register_operand (operands[1], QImode)
- || operands[1] == const0_rtx"
- "@
- mov %1,%0
- sethi %%hi(%a1),%0
- ldub %1,%0
- stb %r1,%0"
- [(set_attr "type" "move,move,load,store")
- (set_attr "length" "*,1,*,1")])
+ [(set (pc)
+ (if_then_else (match_operator 0 "comparison_operator"
+ [(match_operand:CCFP 1 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (pc)
+ (label_ref (match_operand 2 "" ""))))]
+ "TARGET_V9"
+ "*
+{
+ return output_cbranch (operands[0], operands[1], 2, 1,
+ final_sequence && INSN_ANNULLED_BRANCH_P (insn),
+ ! final_sequence);
+}"
+ [(set_attr "type" "branch")])
(define_insn ""
- [(set (match_operand:QI 0 "register_operand" "=r")
- (subreg:QI (lo_sum:SI (match_operand:QI 1 "register_operand" "r")
- (match_operand 2 "immediate_operand" "in")) 0))]
- ""
- "or %1,%%lo(%a2),%0"
- [(set_attr "length" "1")])
+ [(set (pc)
+ (if_then_else (match_operator 0 "comparison_operator"
+ [(match_operand:CCFPE 1 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (label_ref (match_operand 2 "" ""))
+ (pc)))]
+ "TARGET_V9"
+ "*
+{
+ return output_cbranch (operands[0], operands[1], 2, 0,
+ final_sequence && INSN_ANNULLED_BRANCH_P (insn),
+ ! final_sequence);
+}"
+ [(set_attr "type" "branch")])
(define_insn ""
- [(set (mem:QI (match_operand:SI 0 "symbolic_operand" ""))
- (match_operand:QI 1 "reg_or_0_operand" "rJ"))
- (clobber (match_scratch:SI 2 "=&r"))]
- ""
- "sethi %%hi(%a0),%2\;stb %r1,[%2+%%lo(%a0)]"
- [(set_attr "type" "store")
- (set_attr "length" "2")])
+ [(set (pc)
+ (if_then_else (match_operator 0 "comparison_operator"
+ [(match_operand:CCFPE 1 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (pc)
+ (label_ref (match_operand 2 "" ""))))]
+ "TARGET_V9"
+ "*
+{
+ return output_cbranch (operands[0], operands[1], 2, 1,
+ final_sequence && INSN_ANNULLED_BRANCH_P (insn),
+ ! final_sequence);
+}"
+ [(set_attr "type" "branch")])
-(define_expand "movhi"
- [(set (match_operand:HI 0 "general_operand" "")
- (match_operand:HI 1 "general_operand" ""))]
- ""
- "
+;; Sparc V9-specific jump insns. None of these are guaranteed to be
+;; in the architecture.
+
+;; There are no 32 bit brreg insns.
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (match_operator 0 "v9_regcmp_op"
+ [(match_operand:DI 1 "register_operand" "r")
+ (const_int 0)])
+ (label_ref (match_operand 2 "" ""))
+ (pc)))]
+ "TARGET_V9"
+ "*
{
- if (emit_move_sequence (operands, HImode))
- DONE;
-}")
+ return output_v9branch (operands[0], 1, 2, 0,
+ final_sequence && INSN_ANNULLED_BRANCH_P (insn),
+ ! final_sequence);
+}"
+ [(set_attr "type" "branch")])
(define_insn ""
- [(set (match_operand:HI 0 "reg_or_nonsymb_mem_operand" "=r,r,r,Q")
- (match_operand:HI 1 "move_operand" "rI,K,Q,rJ"))]
- "register_operand (operands[0], HImode)
- || register_operand (operands[1], HImode)
- || operands[1] == const0_rtx"
- "@
- mov %1,%0
- sethi %%hi(%a1),%0
- lduh %1,%0
- sth %r1,%0"
- [(set_attr "type" "move,move,load,store")
- (set_attr "length" "*,1,*,1")])
+ [(set (pc)
+ (if_then_else (match_operator 0 "v9_regcmp_op"
+ [(match_operand:DI 1 "register_operand" "r")
+ (const_int 0)])
+ (pc)
+ (label_ref (match_operand 2 "" ""))))]
+ "TARGET_V9"
+ "*
+{
+ return output_v9branch (operands[0], 1, 2, 1,
+ final_sequence && INSN_ANNULLED_BRANCH_P (insn),
+ ! final_sequence);
+}"
+ [(set_attr "type" "branch")])
+\f
+;; Esoteric move insns (lo_sum, high, pic).
(define_insn ""
- [(set (match_operand:HI 0 "register_operand" "=r")
- (lo_sum:HI (match_operand:HI 1 "register_operand" "r")
- (match_operand 2 "immediate_operand" "in")))]
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
+ (match_operand:SI 2 "immediate_operand" "in")))]
""
- "or %1,%%lo(%a2),%0"
+ ;; V9 needs "add" because of the code models. We still use "or" for v8
+ ;; so we can compare the old compiler with the new.
+ "* return TARGET_V9 ? \"add %1,%%lo(%a2),%0\" : \"or %1,%%lo(%a2),%0\";"
+ ;; Need to set length for this arith insn because operand2
+ ;; is not an "arith_operand".
[(set_attr "length" "1")])
+;; For PIC, symbol_refs are put inside unspec so that the optimizer will not
+;; confuse them with real addresses.
(define_insn ""
- [(set (mem:HI (match_operand:SI 0 "symbolic_operand" ""))
- (match_operand:HI 1 "reg_or_0_operand" "rJ"))
- (clobber (match_scratch:SI 2 "=&r"))]
- ""
- "sethi %%hi(%a0),%2\;sth %r1,[%2+%%lo(%a0)]"
- [(set_attr "type" "store")
- (set_attr "length" "2")])
-
-(define_expand "movsi"
- [(set (match_operand:SI 0 "general_operand" "")
- (match_operand:SI 1 "general_operand" ""))]
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
+ (unspec:SI [(match_operand:SI 2 "immediate_operand" "in")] 0)))]
""
- "
-{
- if (emit_move_sequence (operands, SImode))
- DONE;
-}")
+ ;; V9 needs "add" because of the code models. We still use "or" for v8
+ ;; so we can compare the old compiler with the new.
+ "* return TARGET_V9 ? \"add %1,%%lo(%a2),%0\" : \"or %1,%%lo(%a2),%0\";"
+ ;; Need to set length for this arith insn because operand2
+ ;; is not an "arith_operand".
+ [(set_attr "length" "1")])
-;; We must support both 'r' and 'f' registers here, because combine may
-;; convert SFmode hard registers to SImode hard registers when simplifying
-;; subreg sets.
+;; For PIC, symbol_refs are put inside unspec so that the optimizer will not
+;; confuse them with real addresses.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (high:SI (unspec:SI [(match_operand 1 "" "")] 0)))]
+ "check_pic (1)"
+ "sethi %%hi(%a1),%0"
+ [(set_attr "type" "move")
+ (set_attr "length" "1")])
-;; We cannot combine the similar 'r' and 'f' constraints, because it causes
-;; problems with register allocation. Reload might try to put an integer
-;; in an fp register, or an fp number is an integer register.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (high:SI (match_operand 1 "" "")))]
+ "check_pic (1)"
+ "sethi %%hi(%a1),%0"
+ [(set_attr "type" "move")
+ (set_attr "length" "1")])
(define_insn ""
- [(set (match_operand:SI 0 "reg_or_nonsymb_mem_operand" "=r,f,r,r,f,Q,Q")
- (match_operand:SI 1 "move_operand" "rI,!f,K,Q,!Q,rJ,!f"))]
- "register_operand (operands[0], SImode)
- || register_operand (operands[1], SImode)
- || operands[1] == const0_rtx"
- "@
- mov %1,%0
- fmovs %1,%0
- sethi %%hi(%a1),%0
- ld %1,%0
- ld %1,%0
- st %r1,%0
- st %r1,%0"
- [(set_attr "type" "move,fp,move,load,load,store,store")
- (set_attr "length" "*,*,1,*,*,*,*")])
+ [(set (match_operand:HI 0 "register_operand" "=r")
+ (high:HI (match_operand 1 "" "")))]
+ "check_pic (1)"
+ "sethi %%hi(%a1),%0"
+ [(set_attr "type" "move")
+ (set_attr "length" "1")])
;; Special pic pattern, for loading the address of a label into a register.
;; It clobbers o7 because the call puts the return address (i.e. pc value)
[(set_attr "type" "multi")
(set_attr "length" "4")])
+;; v9 special pic pattern, for loading the address of a label into a register.
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (match_operand:DI 1 "move_pic_label" "i"))
+ (set (reg:DI 15) (pc))]
+ "TARGET_V9"
+ "\\n1:\;call 2f\;sethi %%hi(%l1-1b),%0\\n2:\\tor %0,%%lo(%l1-1b),%0\;add %0,%%o7,%0"
+ [(set_attr "type" "multi")
+ (set_attr "length" "4")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (lo_sum:DI (match_operand:DI 1 "register_operand" "0")
+ (match_operand:DI 2 "immediate_operand" "in")))]
+ "! TARGET_V9"
+ "*
+{
+ /* Don't output a 64 bit constant, since we can't trust the assembler to
+ handle it correctly. */
+ if (GET_CODE (operands[2]) == CONST_DOUBLE)
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (operands[2]));
+ return \"or %R1,%%lo(%a2),%R0\";
+}"
+ ;; Need to set length for this arith insn because operand2
+ ;; is not an "arith_operand".
+ [(set_attr "length" "1")])
+
+;; ??? Gas does not handle %lo(DI), so we use the same code for ! TARGET_V9.
+;; ??? The previous comment is obsolete.
+;; ??? Optimizer does not handle "or %o1,%lo(0),%o1". How about add?
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (lo_sum:DI (match_operand:DI 1 "register_operand" "0")
+ (match_operand:DI 2 "immediate_operand" "in")))]
+ "TARGET_V9"
+ "*
+{
+ /* Don't output a 64 bit constant, since we can't trust the assembler to
+ handle it correctly. */
+ if (GET_CODE (operands[2]) == CONST_DOUBLE)
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (operands[2]));
+ /* Note that we use add here. This is important because Medium/Anywhere
+ code model support depends on it. */
+ return \"add %1,%%lo(%a2),%0\";
+}"
+ ;; Need to set length for this arith insn because operand2
+ ;; is not an "arith_operand".
+ [(set_attr "length" "1")])
+
(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r")
(high:DI (match_operand 1 "" "")))]
- "check_pic (1)"
+ "! TARGET_V9 && check_pic (1)"
"*
{
rtx op0 = operands[0];
[(set_attr "type" "move")
(set_attr "length" "2")])
-;; For PIC, symbol_refs are put inside unspec so that the optimizer won't
-;; confuse them with real addresses.
+;;; ??? This pattern originally clobbered a scratch register. However, this
+;;; is illegal, the movdi pattern may not use a temp register because it
+;;; may be called from reload to reload a DImode value. In that case, we
+;;; end up with a scratch register that never gets allocated. To avoid this,
+;;; we use global register 1 which is never otherwise used by gcc as a temp.
+;;; The correct solution here might be to force DImode constants to memory,
+;;; e.g. by using a toc like the romp and rs6000 ports do for addresses, reg
+;;; 1 will then no longer need to be considered a fixed reg.
+
+;;; Gas doesn't have any 64 bit constant support, so don't use %uhi and %ulo
+;;; on constants. Symbols have to be handled by the linker, so we must use
+;;; %uhi and %ulo for them, but gas will handle these correctly.
+;;; ??? This comment is obsolete, gas handles them now.
+
(define_insn ""
- [(set (match_operand:SI 0 "register_operand" "=r")
- (high:SI (unspec:SI [(match_operand 1 "" "")] 0)))]
- "check_pic (1)"
- "sethi %%hi(%a1),%0"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (high:DI (match_operand 1 "const_double_operand" "")))
+ (clobber (reg:DI 1))]
+ "TARGET_V9 && check_pic (1)"
+ "*
+{
+ rtx high, low;
+
+ split_double (operands[1], &high, &low);
+
+ if (high == const0_rtx)
+ {
+ operands[1] = low;
+ output_asm_insn (\"sethi %%hi(%a1),%0\", operands);
+ }
+ else
+ {
+ operands[1] = high;
+ output_asm_insn (singlemove_string (operands), operands);
+
+ operands[1] = low;
+ output_asm_insn (\"sllx %0,32,%0\", operands);
+ if (low != const0_rtx)
+ output_asm_insn (\"sethi %%hi(%a1),%%g1; or %0,%%g1,%0\", operands);
+ }
+}"
[(set_attr "type" "move")
- (set_attr "length" "1")])
+ (set_attr "length" "5")])
+
+;; Most of the required support for the various code models is here.
+;; We can do this because sparcs need the high insn to load the address. We
+;; just need to get high to do the right thing for each code model. Then each
+;; uses the same "%X+%lo(...)" in the load/store insn.
+
+;; When TARGET_MEDLOW, assume that the upper 32 bits of symbol addresses are
+;; always 0.
+;; When TARGET_MEDANY, the upper 32 bits of function addresses are 0.
+;; The data segment has a maximum size of 32 bits, but may be located anywhere.
+;; MEDANY_BASE_REG contains the start address, currently %g4.
+;; When TARGET_FULLANY, symbolic addresses are 64 bits.
(define_insn ""
- [(set (match_operand:SI 0 "register_operand" "=r")
- (high:SI (match_operand 1 "" "")))]
- "check_pic (1)"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (high:DI (match_operand 1 "" "")))
+;; ??? Why the clobber?
+ (clobber (reg:DI 1))]
+ "TARGET_MEDLOW && check_pic (1)"
"sethi %%hi(%a1),%0"
[(set_attr "type" "move")
(set_attr "length" "1")])
+;; WARNING: %0 gets %hi(%1)+%g4.
+;; You cannot OR in %lo(%1), it must be added in.
+
(define_insn ""
- [(set (match_operand:HI 0 "register_operand" "=r")
- (high:HI (match_operand 1 "" "")))]
- "check_pic (1)"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (high:DI (match_operand 1 "data_segment_operand" "")))
+;; ??? Why the clobber?
+ (clobber (reg:DI 1))]
+ "TARGET_MEDANY && check_pic (1)"
+ "sethi %%hi(%a1),%0; add %0,%%g4,%0"
+ [(set_attr "type" "move")
+ (set_attr "length" "2")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (high:DI (match_operand 1 "text_segment_operand" "")))
+;; ??? Why the clobber?
+ (clobber (reg:DI 1))]
+ "TARGET_MEDANY && check_pic (1)"
"sethi %%hi(%a1),%0"
[(set_attr "type" "move")
(set_attr "length" "1")])
-;; For PIC, symbol_refs are put inside unspec so that the optimizer won't
-;; confuse them with real addresses.
(define_insn ""
- [(set (match_operand:SI 0 "register_operand" "=r")
- (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
- (unspec:SI [(match_operand:SI 2 "immediate_operand" "in")] 0)))]
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (high:DI (match_operand 1 "" "")))
+ (clobber (reg:DI 1))]
+ "TARGET_FULLANY && check_pic (1)"
+ "sethi %%uhi(%a1),%%g1; or %%g1,%%ulo(%a1),%%g1; sllx %%g1,32,%%g1; sethi %%hi(%a1),%0; or %0,%%g1,%0"
+ [(set_attr "type" "move")
+ (set_attr "length" "5")])
+\f
+;; Move instructions
+
+(define_expand "movqi"
+ [(set (match_operand:QI 0 "general_operand" "")
+ (match_operand:QI 1 "general_operand" ""))]
+ ""
+ "
+{
+ if (emit_move_sequence (operands, QImode))
+ DONE;
+}")
+
+(define_insn ""
+ [(set (match_operand:QI 0 "reg_or_nonsymb_mem_operand" "=r,r,r,Q")
+ (match_operand:QI 1 "move_operand" "rI,K,Q,rJ"))]
+ "register_operand (operands[0], QImode)
+ || register_operand (operands[1], QImode)
+ || operands[1] == const0_rtx"
+ "@
+ mov %1,%0
+ sethi %%hi(%a1),%0
+ ldub %1,%0
+ stb %r1,%0"
+ [(set_attr "type" "move,move,load,store")
+ (set_attr "length" "*,1,*,1")])
+
+(define_insn ""
+ [(set (match_operand:QI 0 "register_operand" "=r")
+ (subreg:QI (lo_sum:SI (match_operand:QI 1 "register_operand" "r")
+ (match_operand 2 "immediate_operand" "in")) 0))]
+ ""
+ "or %1,%%lo(%a2),%0"
+ [(set_attr "length" "1")])
+
+(define_insn ""
+ [(set (mem:QI (match_operand:SI 0 "symbolic_operand" ""))
+ (match_operand:QI 1 "reg_or_0_operand" "rJ"))
+ (clobber (match_scratch:SI 2 "=&r"))]
+ "(reload_completed || reload_in_progress) && ! TARGET_PTR64"
+ "sethi %%hi(%a0),%2\;stb %r1,[%2+%%lo(%a0)]"
+ [(set_attr "type" "store")
+ (set_attr "length" "2")])
+
+(define_expand "movhi"
+ [(set (match_operand:HI 0 "general_operand" "")
+ (match_operand:HI 1 "general_operand" ""))]
+ ""
+ "
+{
+ if (emit_move_sequence (operands, HImode))
+ DONE;
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "reg_or_nonsymb_mem_operand" "=r,r,r,Q")
+ (match_operand:HI 1 "move_operand" "rI,K,Q,rJ"))]
+ "register_operand (operands[0], HImode)
+ || register_operand (operands[1], HImode)
+ || operands[1] == const0_rtx"
+ "@
+ mov %1,%0
+ sethi %%hi(%a1),%0
+ lduh %1,%0
+ sth %r1,%0"
+ [(set_attr "type" "move,move,load,store")
+ (set_attr "length" "*,1,*,1")])
+
+(define_insn ""
+ [(set (match_operand:HI 0 "register_operand" "=r")
+ (lo_sum:HI (match_operand:HI 1 "register_operand" "r")
+ (match_operand 2 "immediate_operand" "in")))]
""
"or %1,%%lo(%a2),%0"
- ;; Need to set length for this arith insn because operand2
- ;; is not an "arith_operand".
[(set_attr "length" "1")])
-;; ??? Can the next two be moved above the PIC stuff?
-
(define_insn ""
- [(set (match_operand:SI 0 "register_operand" "=r")
- (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
- (match_operand:SI 2 "immediate_operand" "in")))]
+ [(set (mem:HI (match_operand:SI 0 "symbolic_operand" ""))
+ (match_operand:HI 1 "reg_or_0_operand" "rJ"))
+ (clobber (match_scratch:SI 2 "=&r"))]
+ "(reload_completed || reload_in_progress) && ! TARGET_PTR64"
+ "sethi %%hi(%a0),%2\;sth %r1,[%2+%%lo(%a0)]"
+ [(set_attr "type" "store")
+ (set_attr "length" "2")])
+
+(define_expand "movsi"
+ [(set (match_operand:SI 0 "general_operand" "")
+ (match_operand:SI 1 "general_operand" ""))]
""
- "or %1,%%lo(%a2),%0"
- ;; Need to set length for this arith insn because operand2
- ;; is not an "arith_operand".
- [(set_attr "length" "1")])
+ "
+{
+ if (emit_move_sequence (operands, SImode))
+ DONE;
+}")
+
+;; We must support both 'r' and 'f' registers here, because combine may
+;; convert SFmode hard registers to SImode hard registers when simplifying
+;; subreg sets.
+
+;; We cannot combine the similar 'r' and 'f' constraints, because it causes
+;; problems with register allocation. Reload might try to put an integer
+;; in an fp register, or an fp number is an integer register.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "reg_or_nonsymb_mem_operand" "=r,f,r,r,f,Q,Q")
+ (match_operand:SI 1 "move_operand" "rI,!f,K,Q,!Q,rJ,!f"))]
+ "register_operand (operands[0], SImode)
+ || register_operand (operands[1], SImode)
+ || operands[1] == const0_rtx"
+ "@
+ mov %1,%0
+ fmovs %1,%0
+ sethi %%hi(%a1),%0
+ ld %1,%0
+ ld %1,%0
+ st %r1,%0
+ st %r1,%0"
+ [(set_attr "type" "move,fp,move,load,load,store,store")
+ (set_attr "length" "*,*,1,*,*,*,*")])
(define_insn ""
[(set (mem:SI (match_operand:SI 0 "symbolic_operand" ""))
(match_operand:SI 1 "reg_or_0_operand" "rJ"))
(clobber (match_scratch:SI 2 "=&r"))]
- ""
+ "(reload_completed || reload_in_progress) && ! TARGET_PTR64"
"sethi %%hi(%a0),%2\;st %r1,[%2+%%lo(%a0)]"
[(set_attr "type" "store")
(set_attr "length" "2")])
(define_insn ""
[(set (match_operand:DI 0 "reg_or_nonsymb_mem_operand" "=r,T,U,Q,r,r,?f,?f,?Q")
(match_operand:DI 1 "general_operand" "r,U,T,r,Q,i,f,Q,f"))]
- "register_operand (operands[0], DImode)
- || register_operand (operands[1], DImode)
- || operands[1] == const0_rtx"
+ "! TARGET_V9
+ && (register_operand (operands[0], DImode)
+ || register_operand (operands[1], DImode)
+ || operands[1] == const0_rtx)"
"*
{
if (FP_REG_P (operands[0]) || FP_REG_P (operands[1]))
[(set_attr "type" "move,store,load,store,load,multi,fp,fpload,fpstore")
(set_attr "length" "2,1,1,3,3,3,2,3,3")])
+;;; ??? The trick used below can be extended to load any negative 32 bit
+;;; constant in two instructions. Currently the compiler will use HIGH/LO_SUM
+;;; for anything not matching the HIK constraints, which results in 5
+;;; instructions. Positive 32 bit constants can be loaded in the obvious way
+;;; with sethi/ori. To extend the trick, in the xor instruction, use
+;;; xor %o0, ((op1 & 0x3ff) | -0x400), %o0
+;;; This needs the original value of operands[1], not the inverted value.
+
(define_insn ""
- [(set (match_operand:DI 0 "register_operand" "=r")
- (lo_sum:DI (match_operand:DI 1 "register_operand" "0")
- (match_operand:DI 2 "immediate_operand" "in")))]
- ""
+ [(set (match_operand:DI 0 "reg_or_nonsymb_mem_operand" "=r,r,r,Q,?f,?f,?Q")
+ (match_operand:DI 1 "move_operand" "rI,K,Q,rJ,f,Q,f"))]
+ "TARGET_V9
+ && (register_operand (operands[0], DImode)
+ || register_operand (operands[1], DImode)
+ || operands[1] == const0_rtx)"
"*
{
- /* Don't output a 64 bit constant, since we can't trust the assembler to
- handle it correctly. */
- if (GET_CODE (operands[2]) == CONST_DOUBLE)
- operands[2] = gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_LOW (operands[2]));
- return \"or %R1,%%lo(%a2),%R0\";
+ switch (which_alternative)
+ {
+ case 0:
+ return \"mov %1,%0\";
+ case 1:
+ /* Sethi does not sign extend, so we must use a little trickery
+ to use it for negative numbers. Invert the constant before
+ loading it in, then use a xor immediate to invert the loaded bits
+ (along with the upper 32 bits) to the desired constant. This
+ works because the sethi and immediate fields overlap. */
+
+ if ((INTVAL (operands[1]) & 0x80000000) == 0)
+ return \"sethi %%hi(%a1),%0\";
+ else
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode,
+ ~ INTVAL (operands[1]));
+ output_asm_insn (\"sethi %%hi(%a1),%0\", operands);
+ /* The low 10 bits are already zero, but invert the rest.
+ Assemblers don't accept 0x1c00, so use -0x400 instead. */
+ return \"xor %0,-0x400,%0\";
+ }
+ case 2:
+ return \"ldx %1,%0\";
+ case 3:
+ return \"stx %r1,%0\";
+ case 4:
+ return \"mov %1,%0\";
+ case 5:
+ return \"ldd %1,%0\";
+ case 6:
+ return \"std %1,%0\";
+ }
}"
- ;; Need to set length for this arith insn because operand2
- ;; is not an "arith_operand".
- [(set_attr "length" "1")])
+ [(set_attr "type" "move,move,load,store,fp,fpload,fpstore")
+ (set_attr "length" "1,2,1,1,1,1,1")])
;; ??? There's no symbolic (set (mem:DI ...) ...).
+;; Experimentation with v9 suggested one isn't needed.
\f
;; Block move insns.
[(set (mem:SF (match_operand:SI 0 "symbolic_operand" "i"))
(match_operand:SF 1 "reg_or_0_operand" "rfG"))
(clobber (match_scratch:SI 2 "=&r"))]
- ""
+ "(reload_completed || reload_in_progress) && ! TARGET_PTR64"
"sethi %%hi(%a0),%2\;st %r1,[%2+%%lo(%a0)]"
[(set_attr "type" "store")
(set_attr "length" "2")])
case 1:
return output_fp_move_double (operands);
case 2:
- operands[1] = adj_offsettable_operand (operands[0], 4);
- return \"st %%g0,%0\;st %%g0,%1\";
+ if (TARGET_V9)
+ {
+ return \"stx %%g0,%0\";
+ }
+ else
+ {
+ operands[1] = adj_offsettable_operand (operands[0], 4);
+ return \"st %%g0,%0\;st %%g0,%1\";
+ }
}
}"
[(set_attr "type" "load,fpload,store")
[(set_attr "type" "store,load,move,store,load")
(set_attr "length" "1,1,2,3,3")])
+;; ??? Do we need a v9 version of this?
(define_split
[(set (match_operand:DF 0 "register_operand" "")
(match_operand:DF 1 "register_operand" ""))]
- "reload_completed"
+ "! TARGET_V9 && reload_completed"
[(set (match_dup 2) (match_dup 3))
(set (match_dup 4) (match_dup 5))]
"
[(set (mem:DF (match_operand:SI 0 "symbolic_operand" "i,i"))
(match_operand:DF 1 "reg_or_0_operand" "rf,G"))
(clobber (match_scratch:SI 2 "=&r,&r"))]
- ""
+ "(reload_completed || reload_in_progress) && ! TARGET_PTR64"
"*
{
output_asm_insn (\"sethi %%hi(%a0),%2\", operands);
case 1:
return output_fp_move_quad (operands);
case 2:
- operands[1] = adj_offsettable_operand (operands[0], 4);
- operands[2] = adj_offsettable_operand (operands[0], 8);
- operands[3] = adj_offsettable_operand (operands[0], 12);
- return \"st %%g0,%0\;st %%g0,%1\;st %%g0,%2\;st %%g0,%3\";
+ if (TARGET_V9)
+ {
+ operands[1] = adj_offsettable_operand (operands[0], 8);
+ return \"stx %%g0,%0\;stx %%g0,%1\";
+ }
+ else
+ {
+ /* ??? Do we run off the end of the array here? */
+ operands[1] = adj_offsettable_operand (operands[0], 4);
+ operands[2] = adj_offsettable_operand (operands[0], 8);
+ operands[3] = adj_offsettable_operand (operands[0], 12);
+ return \"st %%g0,%0\;st %%g0,%1\;st %%g0,%2\;st %%g0,%3\";
+ }
}
}"
[(set_attr "type" "load,fpload,store")
[(set (mem:TF (match_operand:SI 0 "symbolic_operand" "i,i"))
(match_operand:TF 1 "reg_or_0_operand" "rf,G"))
(clobber (match_scratch:SI 2 "=&r,&r"))]
- ""
+ "(reload_completed || reload_in_progress) && ! TARGET_PTR64"
"*
{
output_asm_insn (\"sethi %%hi(%a0),%2\", operands);
[(set_attr "type" "store")
(set_attr "length" "5")])
\f
+;; Sparc V9 conditional move instructions.
+
+; ??? There is not actually a 32 bit version of this instruction.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CC 0) (const_int 0)])
+ (match_operand:SI 2 "arith11_operand" "ri")
+ (match_operand:SI 3 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %%icc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CC 0) (const_int 0)])
+ (match_operand:DI 2 "arith11_double_operand" "rHI")
+ (match_operand:DI 3 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %%icc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+;; ??? There is not actually a 32 bit version of this instruction.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CCX 0) (const_int 0)])
+ (match_operand:SI 2 "arith11_operand" "ri")
+ (match_operand:SI 3 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %%xcc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CCX 0) (const_int 0)])
+ (match_operand:DI 2 "arith11_double_operand" "rHI")
+ (match_operand:DI 3 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %%xcc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+;; ??? There is not actually a 32 bit version of this instruction.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFP 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:SI 3 "arith11_operand" "ri")
+ (match_operand:SI 4 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+;; ??? There is not actually a 32 bit version of this instruction.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFPE 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:SI 3 "arith11_operand" "ri")
+ (match_operand:SI 4 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFP 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:DI 3 "arith11_double_operand" "rHI")
+ (match_operand:DI 4 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFPE 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:DI 3 "arith11_double_operand" "rHI")
+ (match_operand:DI 4 "register_operand" "0")))]
+ "TARGET_V9"
+ "mov%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+;; ??? There is not actually a 32 bit version of this instruction.
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "v9_regcmp_op"
+ [(match_operand:DI 2 "register_operand" "r")
+ (const_int 0)])
+ (match_operand:SI 3 "arith10_operand" "ri")
+ (match_operand:SI 4 "register_operand" "0")))]
+ "TARGET_V9"
+ "movr%D1 %2,%r3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (if_then_else (match_operator 1 "v9_regcmp_op"
+ [(match_operand:DI 2 "register_operand" "r")
+ (const_int 0)])
+ (match_operand:DI 3 "arith10_double_operand" "ri")
+ (match_operand:DI 4 "register_operand" "0")))]
+ "TARGET_V9"
+ "movr%D1 %2,%r3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "v9_regcmp_op"
+ [(match_operand:DI 2 "register_operand" "r")
+ (const_int 0)])
+ (match_operand:SF 3 "register_operand" "f")
+ (match_operand:SF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovrs%D1 %2,%r3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "v9_regcmp_op"
+ [(match_operand:DI 2 "register_operand" "r")
+ (const_int 0)])
+ (match_operand:DF 3 "register_operand" "f")
+ (match_operand:DF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovrd%D1 %2,%r3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:TF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "v9_regcmp_op"
+ [(match_operand:DI 2 "register_operand" "r")
+ (const_int 0)])
+ (match_operand:TF 3 "register_operand" "f")
+ (match_operand:TF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovrq%D1 %2,%r3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFP 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:SF 3 "register_operand" "f")
+ (match_operand:SF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovs%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFPE 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:SF 3 "register_operand" "f")
+ (match_operand:SF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovs%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFP 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:DF 3 "register_operand" "f")
+ (match_operand:DF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovd%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFPE 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:DF 3 "register_operand" "f")
+ (match_operand:DF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovd%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:TF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFP 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:TF 3 "register_operand" "f")
+ (match_operand:TF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovq%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:TF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(match_operand:CCFPE 2 "ccfp_reg_operand" "c")
+ (const_int 0)])
+ (match_operand:TF 3 "register_operand" "f")
+ (match_operand:TF 4 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovq%C1 %2,%3,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CC 0) (const_int 0)])
+ (match_operand:SF 2 "register_operand" "f")
+ (match_operand:SF 3 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovs%C1 %%icc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CC 0) (const_int 0)])
+ (match_operand:DF 2 "register_operand" "f")
+ (match_operand:DF 3 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovd%C1 %%icc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:TF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CC 0) (const_int 0)])
+ (match_operand:TF 2 "register_operand" "f")
+ (match_operand:TF 3 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovq%C1 %%icc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CCX 0) (const_int 0)])
+ (match_operand:SF 2 "register_operand" "f")
+ (match_operand:SF 3 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovs%C1 %%xcc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CCX 0) (const_int 0)])
+ (match_operand:DF 2 "register_operand" "f")
+ (match_operand:DF 3 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovd%C1 %%xcc,%2,%0"
+ [(set_attr "type" "cmove")])
+
+(define_insn ""
+ [(set (match_operand:TF 0 "register_operand" "=f")
+ (if_then_else (match_operator 1 "comparison_operator"
+ [(reg:CCX 0) (const_int 0)])
+ (match_operand:TF 2 "register_operand" "f")
+ (match_operand:TF 3 "register_operand" "0")))]
+ "TARGET_V9 && TARGET_FPU"
+ "fmovq%C1 %%xcc,%2,%0"
+ [(set_attr "type" "cmove")])
+\f
;;- zero extension instructions
;; These patterns originally accepted general_operands, however, slightly
[(set_attr "type" "unary,load")
(set_attr "length" "1")])
+(define_expand "zero_extendqidi2"
+ [(set (match_operand:DI 0 "register_operand" "")
+ (zero_extend:DI (match_operand:QI 1 "register_operand" "")))]
+ "TARGET_V9"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (zero_extend:DI (match_operand:QI 1 "sparc_operand" "r,Q")))]
+ "TARGET_V9 && GET_CODE (operands[1]) != CONST_INT"
+ "@
+ and %1,0xff,%0
+ ldub %1,%0"
+ [(set_attr "type" "unary,load")
+ (set_attr "length" "1")])
+
+(define_expand "zero_extendhidi2"
+ [(set (match_operand:DI 0 "register_operand" "")
+ (zero_extend:DI (match_operand:HI 1 "register_operand" "")))]
+ "TARGET_V9"
+ "
+{
+ rtx temp = gen_reg_rtx (DImode);
+ rtx shift_48 = gen_rtx (CONST_INT, VOIDmode, 48);
+ int op1_subword = 0;
+
+ if (GET_CODE (operand1) == SUBREG)
+ {
+ op1_subword = SUBREG_WORD (operand1);
+ operand1 = XEXP (operand1, 0);
+ }
+
+ emit_insn (gen_ashldi3 (temp, gen_rtx (SUBREG, DImode, operand1,
+ op1_subword),
+ shift_48));
+ emit_insn (gen_lshrdi3 (operand0, temp, shift_48));
+ DONE;
+}")
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (zero_extend:DI (match_operand:HI 1 "memory_operand" "m")))]
+ "TARGET_V9"
+ "lduh %1,%0"
+ [(set_attr "type" "load")])
+
+;; ??? Write truncdisi pattern using sra?
+
+(define_expand "zero_extendsidi2"
+ [(set (match_operand:DI 0 "register_operand" "")
+ (zero_extend:DI (match_operand:SI 1 "register_operand" "")))]
+ "TARGET_V9"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (zero_extend:DI (match_operand:SI 1 "sparc_operand" "r,Q")))]
+ "TARGET_V9 && GET_CODE (operands[1]) != CONST_INT"
+ "@
+ srl %1,0,%0
+ lduw %1,%0"
+ [(set_attr "type" "unary,load")
+ (set_attr "length" "1")])
+
+;; Simplify comparisons of extended values.
+
(define_insn ""
[(set (reg:CC 0)
(compare:CC (zero_extend:SI (match_operand:QI 0 "register_operand" "r"))
"ldsh %1,%0"
[(set_attr "type" "load")])
-(define_expand "extendqihi2"
- [(set (match_operand:HI 0 "register_operand" "")
- (sign_extend:HI (match_operand:QI 1 "register_operand" "")))]
- ""
+(define_expand "extendqihi2"
+ [(set (match_operand:HI 0 "register_operand" "")
+ (sign_extend:HI (match_operand:QI 1 "register_operand" "")))]
+ ""
+ "
+{
+ rtx temp = gen_reg_rtx (SImode);
+ rtx shift_24 = gen_rtx (CONST_INT, VOIDmode, 24);
+ int op1_subword = 0;
+ int op0_subword = 0;
+
+ if (GET_CODE (operand1) == SUBREG)
+ {
+ op1_subword = SUBREG_WORD (operand1);
+ operand1 = XEXP (operand1, 0);
+ }
+ if (GET_CODE (operand0) == SUBREG)
+ {
+ op0_subword = SUBREG_WORD (operand0);
+ operand0 = XEXP (operand0, 0);
+ }
+ emit_insn (gen_ashlsi3 (temp, gen_rtx (SUBREG, SImode, operand1,
+ op1_subword),
+ shift_24));
+ if (GET_MODE (operand0) != SImode)
+ operand0 = gen_rtx (SUBREG, SImode, operand0, op0_subword);
+ emit_insn (gen_ashrsi3 (operand0, temp, shift_24));
+ DONE;
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "register_operand" "=r")
+ (sign_extend:HI (match_operand:QI 1 "memory_operand" "m")))]
+ ""
+ "ldsb %1,%0"
+ [(set_attr "type" "load")])
+
+(define_expand "extendqisi2"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (sign_extend:SI (match_operand:QI 1 "register_operand" "")))]
+ ""
+ "
+{
+ rtx temp = gen_reg_rtx (SImode);
+ rtx shift_24 = gen_rtx (CONST_INT, VOIDmode, 24);
+ int op1_subword = 0;
+
+ if (GET_CODE (operand1) == SUBREG)
+ {
+ op1_subword = SUBREG_WORD (operand1);
+ operand1 = XEXP (operand1, 0);
+ }
+
+ emit_insn (gen_ashlsi3 (temp, gen_rtx (SUBREG, SImode, operand1,
+ op1_subword),
+ shift_24));
+ emit_insn (gen_ashrsi3 (operand0, temp, shift_24));
+ DONE;
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (sign_extend:SI (match_operand:QI 1 "memory_operand" "m")))]
+ ""
+ "ldsb %1,%0"
+ [(set_attr "type" "load")])
+
+(define_expand "extendqidi2"
+ [(set (match_operand:DI 0 "register_operand" "")
+ (sign_extend:DI (match_operand:QI 1 "register_operand" "")))]
+ "TARGET_V9"
"
{
- rtx temp = gen_reg_rtx (SImode);
- rtx shift_24 = gen_rtx (CONST_INT, VOIDmode, 24);
+ rtx temp = gen_reg_rtx (DImode);
+ rtx shift_56 = gen_rtx (CONST_INT, VOIDmode, 56);
int op1_subword = 0;
- int op0_subword = 0;
if (GET_CODE (operand1) == SUBREG)
{
op1_subword = SUBREG_WORD (operand1);
operand1 = XEXP (operand1, 0);
}
- if (GET_CODE (operand0) == SUBREG)
- {
- op0_subword = SUBREG_WORD (operand0);
- operand0 = XEXP (operand0, 0);
- }
- emit_insn (gen_ashlsi3 (temp, gen_rtx (SUBREG, SImode, operand1,
+
+ emit_insn (gen_ashldi3 (temp, gen_rtx (SUBREG, DImode, operand1,
op1_subword),
- shift_24));
- if (GET_MODE (operand0) != SImode)
- operand0 = gen_rtx (SUBREG, SImode, operand0, op0_subword);
- emit_insn (gen_ashrsi3 (operand0, temp, shift_24));
+ shift_56));
+ emit_insn (gen_ashrdi3 (operand0, temp, shift_56));
DONE;
}")
(define_insn ""
- [(set (match_operand:HI 0 "register_operand" "=r")
- (sign_extend:HI (match_operand:QI 1 "memory_operand" "m")))]
- ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (sign_extend:DI (match_operand:QI 1 "memory_operand" "m")))]
+ "TARGET_V9"
"ldsb %1,%0"
[(set_attr "type" "load")])
-(define_expand "extendqisi2"
- [(set (match_operand:SI 0 "register_operand" "")
- (sign_extend:SI (match_operand:QI 1 "register_operand" "")))]
- ""
+(define_expand "extendhidi2"
+ [(set (match_operand:DI 0 "register_operand" "")
+ (sign_extend:DI (match_operand:HI 1 "register_operand" "")))]
+ "TARGET_V9"
"
{
- rtx temp = gen_reg_rtx (SImode);
- rtx shift_24 = gen_rtx (CONST_INT, VOIDmode, 24);
+ rtx temp = gen_reg_rtx (DImode);
+ rtx shift_48 = gen_rtx (CONST_INT, VOIDmode, 48);
int op1_subword = 0;
if (GET_CODE (operand1) == SUBREG)
operand1 = XEXP (operand1, 0);
}
- emit_insn (gen_ashlsi3 (temp, gen_rtx (SUBREG, SImode, operand1,
+ emit_insn (gen_ashldi3 (temp, gen_rtx (SUBREG, DImode, operand1,
op1_subword),
- shift_24));
- emit_insn (gen_ashrsi3 (operand0, temp, shift_24));
+ shift_48));
+ emit_insn (gen_ashrdi3 (operand0, temp, shift_48));
DONE;
}")
(define_insn ""
- [(set (match_operand:SI 0 "register_operand" "=r")
- (sign_extend:SI (match_operand:QI 1 "memory_operand" "m")))]
- ""
- "ldsb %1,%0"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (sign_extend:DI (match_operand:HI 1 "memory_operand" "m")))]
+ "TARGET_V9"
+ "ldsh %1,%0"
[(set_attr "type" "load")])
+
+(define_expand "extendsidi2"
+ [(set (match_operand:DI 0 "register_operand" "")
+ (sign_extend:DI (match_operand:SI 1 "register_operand" "")))]
+ "TARGET_V9"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r,r")
+ (sign_extend:DI (match_operand:SI 1 "sparc_operand" "r,Q")))]
+ "TARGET_V9"
+ "@
+ sra %1,0,%0
+ ldsw %1,%0"
+ [(set_attr "type" "unary,load")
+ (set_attr "length" "1")])
\f
;; Special pattern for optimizing bit-field compares. This is needed
;; because combine uses this as a canonical form.
operands[1] = gen_rtx (CONST_INT, VOIDmode, mask);
return \"andcc %0,%1,%%g0\";
}")
+
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (zero_extract:DI (match_operand:DI 0 "register_operand" "r")
+ (match_operand:SI 1 "small_int" "n")
+ (match_operand:SI 2 "small_int" "n"))
+ (const_int 0)))]
+ "TARGET_V9 && INTVAL (operands[2]) > 51"
+ "*
+{
+ int len = INTVAL (operands[1]);
+ int pos = 64 - INTVAL (operands[2]) - len;
+ unsigned mask = ((1 << len) - 1) << pos;
+
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, mask);
+ return \"andcc %0,%1,%%g0\";
+}")
\f
;; Conversions between float, double and long double.
"fitoq %1,%0"
[(set_attr "type" "fp")])
+;; Now the same for 64 bit sources.
+;; ??? We cannot put DImode values in fp regs (see below near fix_truncdfsi2).
+
+(define_expand "floatdisf2"
+ [(parallel [(set (match_operand:SF 0 "register_operand" "")
+ (float:SF (match_operand:DI 1 "general_operand" "")))
+ (clobber (match_dup 2))
+ (clobber (match_dup 3))])]
+ "TARGET_V9 && TARGET_FPU"
+ "
+{
+ operands[2] = gen_reg_rtx (DFmode);
+ operands[3] = sparc64_fpconv_stack_temp ();
+}")
+
+(define_expand "floatdidf2"
+ [(parallel [(set (match_operand:DF 0 "register_operand" "")
+ (float:DF (match_operand:DI 1 "general_operand" "")))
+ (clobber (match_dup 2))
+ (clobber (match_dup 3))])]
+ "TARGET_V9 && TARGET_FPU"
+ "
+{
+ operands[2] = gen_reg_rtx (DFmode);
+ operands[3] = sparc64_fpconv_stack_temp ();
+}")
+
+(define_expand "floatditf2"
+ [(parallel [(set (match_operand:TF 0 "register_operand" "")
+ (float:TF (match_operand:DI 1 "general_operand" "")))
+ (clobber (match_dup 2))
+ (clobber (match_dup 3))])]
+ "TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "
+{
+ operands[2] = gen_reg_rtx (DFmode);
+ operands[3] = sparc64_fpconv_stack_temp ();
+}")
+
+(define_insn ""
+ [(parallel [(set (match_operand:SF 0 "register_operand" "=f")
+ (float:SF (match_operand:DI 1 "general_operand" "rm")))
+ (clobber (match_operand:DF 2 "register_operand" "=&f"))
+ (clobber (match_operand:DI 3 "memory_operand" "m"))])]
+ "TARGET_V9 && TARGET_FPU"
+ "*
+{
+ if (GET_CODE (operands[1]) == MEM)
+ output_asm_insn (\"ldd %1,%2\", operands);
+ else
+ output_asm_insn (\"stx %1,%3\;ldd %3,%2\", operands);
+ return \"fxtos %2,%0\";
+}"
+ [(set_attr "type" "fp")
+ (set_attr "length" "3")])
+
+(define_insn ""
+ [(parallel [(set (match_operand:DF 0 "register_operand" "=f")
+ (float:DF (match_operand:DI 1 "general_operand" "rm")))
+ (clobber (match_operand:DF 2 "register_operand" "=&f"))
+ (clobber (match_operand:DI 3 "memory_operand" "m"))])]
+ "TARGET_V9 && TARGET_FPU"
+ "*
+{
+ if (GET_CODE (operands[1]) == MEM)
+ output_asm_insn (\"ldd %1,%2\", operands);
+ else
+ output_asm_insn (\"stx %1,%3\;ldd %3,%2\", operands);
+ return \"fxtod %2,%0\";
+}"
+ [(set_attr "type" "fp")
+ (set_attr "length" "3")])
+
+(define_insn ""
+ [(parallel [(set (match_operand:TF 0 "register_operand" "=f")
+ (float:TF (match_operand:DI 1 "general_operand" "rm")))
+ (clobber (match_operand:DF 2 "register_operand" "=&f"))
+ (clobber (match_operand:DI 3 "memory_operand" "m"))])]
+ "TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "*
+{
+ if (GET_CODE (operands[1]) == MEM)
+ output_asm_insn (\"ldd %1,%2\", operands);
+ else
+ output_asm_insn (\"stx %1,%3\;ldd %3,%2\", operands);
+ return \"fxtoq %2,%0\";
+}"
+ [(set_attr "type" "fp")
+ (set_attr "length" "3")])
+
+;; ??? Ideally, these are what we would like to use.
+
+(define_insn "floatdisf2_v9"
+ [(set (match_operand:SF 0 "register_operand" "=f")
+ (float:SF (match_operand:DI 1 "register_operand" "f")))]
+ "0 && TARGET_V9 && TARGET_FPU"
+ "fxtos %1,%0"
+ [(set_attr "type" "fp")])
+
+(define_insn "floatdidf2_v9"
+ [(set (match_operand:DF 0 "register_operand" "=f")
+ (float:DF (match_operand:DI 1 "register_operand" "f")))]
+ "0 && TARGET_V9 && TARGET_FPU"
+ "fxtod %1,%0"
+ [(set_attr "type" "fp")])
+
+(define_insn "floatditf2_v9"
+ [(set (match_operand:TF 0 "register_operand" "=f")
+ (float:TF (match_operand:DI 1 "register_operand" "f")))]
+ "0 && TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "fxtoq %1,%0"
+ [(set_attr "type" "fp")])
+
;; Convert a float to an actual integer.
;; Truncation is performed as part of the conversion.
"TARGET_FPU && TARGET_HARD_QUAD"
"fqtoi %1,%0"
[(set_attr "type" "fp")])
+
+;; Now the same, for 64-bit targets
+;; ??? We try to work around an interesting problem.
+;; If gcc tries to do a subreg on the result it will get the wrong answer:
+;; "(subreg:SI (reg:DI M int-reg) 0)" is the same as
+;; "(subreg:SI (reg:DI N float-reg) 1)", but gcc does not know how to change
+;; the "0" to a "1". One could enhance alter_subreg but it is not clear how to
+;; do this cleanly.
+
+(define_expand "fix_truncsfdi2"
+ [(parallel [(set (match_operand:DI 0 "general_operand" "")
+ (fix:DI (fix:SF (match_operand:SF 1 "register_operand" ""))))
+ (clobber (match_dup 2))
+ (clobber (match_dup 3))])]
+ "TARGET_V9 && TARGET_FPU"
+ "
+{
+ operands[2] = gen_reg_rtx (DFmode);
+ operands[3] = sparc64_fpconv_stack_temp ();
+}")
+
+(define_expand "fix_truncdfdi2"
+ [(parallel [(set (match_operand:DI 0 "general_operand" "")
+ (fix:DI (fix:DF (match_operand:DF 1 "register_operand" ""))))
+ (clobber (match_dup 2))
+ (clobber (match_dup 3))])]
+ "TARGET_V9 && TARGET_FPU"
+ "
+{
+ operands[2] = gen_reg_rtx (DFmode);
+ operands[3] = sparc64_fpconv_stack_temp ();
+}")
+
+(define_expand "fix_trunctfdi2"
+ [(parallel [(set (match_operand:DI 0 "general_operand" "")
+ (fix:DI (fix:TF (match_operand:TF 1 "register_operand" ""))))
+ (clobber (match_dup 2))
+ (clobber (match_dup 3))])]
+ "TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "
+{
+ operands[2] = gen_reg_rtx (DFmode);
+ operands[3] = sparc64_fpconv_stack_temp ();
+}")
+
+(define_insn ""
+ [(parallel [(set (match_operand:DI 0 "general_operand" "=rm")
+ (fix:DI (fix:SF (match_operand:SF 1 "register_operand" "f"))))
+ (clobber (match_operand:DF 2 "register_operand" "=&f"))
+ (clobber (match_operand:DI 3 "memory_operand" "m"))])]
+ "TARGET_V9 && TARGET_FPU"
+ "*
+{
+ output_asm_insn (\"fstox %1,%2\", operands);
+ if (GET_CODE (operands[0]) == MEM)
+ return \"std %2,%0\";
+ else
+ return \"std %2,%3\;ldx %3,%0\";
+}"
+ [(set_attr "type" "fp")
+ (set_attr "length" "3")])
+
+(define_insn ""
+ [(parallel [(set (match_operand:DI 0 "general_operand" "=rm")
+ (fix:DI (fix:DF (match_operand:DF 1 "register_operand" "f"))))
+ (clobber (match_operand:DF 2 "register_operand" "=&f"))
+ (clobber (match_operand:DI 3 "memory_operand" "m"))])]
+ "TARGET_V9 && TARGET_FPU"
+ "*
+{
+ output_asm_insn (\"fdtox %1,%2\", operands);
+ if (GET_CODE (operands[0]) == MEM)
+ return \"std %2,%0\";
+ else
+ return \"std %2,%3\;ldx %3,%0\";
+}"
+ [(set_attr "type" "fp")
+ (set_attr "length" "3")])
+
+(define_insn ""
+ [(parallel [(set (match_operand:DI 0 "general_operand" "=rm")
+ (fix:DI (fix:TF (match_operand:TF 1 "register_operand" "f"))))
+ (clobber (match_operand:DF 2 "register_operand" "=&f"))
+ (clobber (match_operand:DI 3 "memory_operand" "m"))])]
+ "TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "*
+{
+ output_asm_insn (\"fqtox %1,%2\", operands);
+ if (GET_CODE (operands[0]) == MEM)
+ return \"std %2,%0\";
+ else
+ return \"std %2,%3\;ldx %3,%0\";
+}"
+ [(set_attr "type" "fp")
+ (set_attr "length" "3")])
+
+;; ??? Ideally, these are what we would like to use.
+
+(define_insn "fix_truncsfdi2_v9"
+ [(set (match_operand:DI 0 "register_operand" "=f")
+ (fix:DI (fix:SF (match_operand:SF 1 "register_operand" "f"))))]
+ "0 && TARGET_V9 && TARGET_FPU"
+ "fstox %1,%0"
+ [(set_attr "type" "fp")])
+
+(define_insn "fix_truncdfdi2_v9"
+ [(set (match_operand:DI 0 "register_operand" "=f")
+ (fix:DI (fix:DF (match_operand:DF 1 "register_operand" "f"))))]
+ "0 && TARGET_V9 && TARGET_FPU"
+ "fdtox %1,%0"
+ [(set_attr "type" "fp")])
+
+(define_insn "fix_trunctfdi2_v9"
+ [(set (match_operand:DI 0 "register_operand" "=f")
+ (fix:DI (fix:TF (match_operand:TF 1 "register_operand" "f"))))]
+ "0 && TARGET_V9 && TARGET_FPU && TARGET_HARD_QUAD"
+ "fqtox %1,%0"
+ [(set_attr "type" "fp")])
\f
;;- arithmetic instructions
-(define_insn "adddi3"
+(define_expand "adddi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (plus:DI (match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ ""
+ "
+{
+ if (! TARGET_V9)
+ {
+ emit_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (2,
+ gen_rtx (SET, VOIDmode, operands[0],
+ gen_rtx (PLUS, DImode, operands[1],
+ operands[2])),
+ gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 0)))));
+ DONE;
+ }
+}")
+
+(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r")
(plus:DI (match_operand:DI 1 "arith_double_operand" "%r")
(match_operand:DI 2 "arith_double_operand" "rHI")))
(clobber (reg:SI 0))]
- ""
+ "! TARGET_V9"
"*
{
rtx op2 = operands[2];
}"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (plus:DI (match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "add %1,%2,%0")
+
(define_insn "addsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (match_operand:SI 1 "arith_operand" "%r")
"addcc %0,%1,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX_NOOV 0)
+ (compare:CCX_NOOV (plus:DI (match_operand:DI 0 "arith_double_operand" "%r")
+ (match_operand:DI 1 "arith_double_operand" "rHI"))
+ (const_int 0)))]
+ "TARGET_V9"
+ "addcc %0,%1,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC_NOOV 0)
(compare:CC_NOOV (plus:SI (match_operand:SI 1 "arith_operand" "%r")
""
"addcc %1,%2,%0")
-(define_insn "subdi3"
+(define_insn ""
+ [(set (reg:CCX_NOOV 0)
+ (compare:CCX_NOOV (plus:DI (match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI"))
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (plus:DI (match_dup 1) (match_dup 2)))]
+ "TARGET_V9"
+ "addcc %1,%2,%0")
+
+(define_expand "subdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (minus:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ ""
+ "
+{
+ if (! TARGET_V9)
+ {
+ emit_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (2,
+ gen_rtx (SET, VOIDmode, operands[0],
+ gen_rtx (MINUS, DImode, operands[1],
+ operands[2])),
+ gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 0)))));
+ DONE;
+ }
+}")
+
+(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r")
(minus:DI (match_operand:DI 1 "register_operand" "r")
(match_operand:DI 2 "arith_double_operand" "rHI")))
(clobber (reg:SI 0))]
- ""
+ "! TARGET_V9"
"*
{
rtx op2 = operands[2];
}"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (minus:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "sub %1,%2,%0")
+
(define_insn "subsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "register_operand" "r")
"subcc %0,%1,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX_NOOV 0)
+ (compare:CCX_NOOV (minus:DI (match_operand:DI 0 "register_operand" "r")
+ (match_operand:DI 1 "arith_double_operand" "rHI"))
+ (const_int 0)))]
+ "TARGET_V9"
+ "subcc %0,%1,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC_NOOV 0)
(compare:CC_NOOV (minus:SI (match_operand:SI 1 "register_operand" "r")
""
"subcc %1,%2,%0")
+(define_insn ""
+ [(set (reg:CCX_NOOV 0)
+ (compare:CCX_NOOV (minus:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "arith_double_operand" "rHI"))
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (minus:DI (match_dup 1) (match_dup 2)))]
+ "TARGET_V9"
+ "subcc %1,%2,%0")
+
+;; This is anachronistic, and should not be used in v9 software.
+;; The v9 compiler will widen the args and use muldi3.
+
(define_insn "mulsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (match_operand:SI 1 "arith_operand" "%r")
"TARGET_V8 || TARGET_SPARCLITE"
"smul %1,%2,%0")
+(define_insn "muldi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (mult:DI (match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "mulx %1,%2,%0")
+
;; It is not known whether this will match.
(define_insn ""
"sra %1,31,%3\;wr %%g0,%3,%%y\;nop\;nop\;nop\;sdiv %1,%2,%0"
[(set_attr "length" "6")])
+(define_insn "divdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (div:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "sdivx %1,%2,%0")
+
;; It is not known whether this will match.
(define_insn ""
"wr %%g0,%%g0,%%y\;nop\;nop\;nop\;udiv %1,%2,%0"
[(set_attr "length" "5")])
+(define_insn "udivdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (udiv:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "udivx %1,%2,%0")
+
;; It is not known whether this will match.
(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r")
(and:DI (match_operand:DI 1 "arith_double_operand" "%r")
(match_operand:DI 2 "arith_double_operand" "rHI")))]
- ""
+ "! TARGET_V9"
"*
{
rtx op2 = operands[2];
}"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (and:DI (match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "and %1,%2,%0")
+
(define_insn "andsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(and:SI (match_operand:SI 1 "arith_operand" "%r")
[(set (match_operand:DI 0 "register_operand" "=r")
(and:DI (not:DI (match_operand:DI 1 "register_operand" "r"))
(match_operand:DI 2 "register_operand" "r")))]
- ""
+ "! TARGET_V9"
"andn %2,%1,%0\;andn %R2,%R1,%R0"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (and:DI (not:DI (match_operand:DI 1 "register_operand" "r"))
+ (match_operand:DI 2 "register_operand" "r")))]
+ "TARGET_V9"
+ "andn %2,%1,%0")
+
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
(and:SI (not:SI (match_operand:SI 1 "register_operand" "r"))
[(set (match_operand:DI 0 "register_operand" "=r")
(ior:DI (match_operand:DI 1 "arith_double_operand" "%r")
(match_operand:DI 2 "arith_double_operand" "rHI")))]
- ""
+ "! TARGET_V9"
"*
{
rtx op2 = operands[2];
}"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (ior:DI (match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "or %1,%2,%0")
+
(define_insn "iorsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(ior:SI (match_operand:SI 1 "arith_operand" "%r")
[(set (match_operand:DI 0 "register_operand" "=r")
(ior:DI (not:DI (match_operand:DI 1 "register_operand" "r"))
(match_operand:DI 2 "register_operand" "r")))]
- ""
+ "! TARGET_V9"
"orn %2,%1,%0\;orn %R2,%R1,%R0"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (ior:DI (not:DI (match_operand:DI 1 "register_operand" "r"))
+ (match_operand:DI 2 "register_operand" "r")))]
+ "TARGET_V9"
+ "orn %2,%1,%0")
+
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
(ior:SI (not:SI (match_operand:SI 1 "register_operand" "r"))
[(set (match_operand:DI 0 "register_operand" "=r")
(xor:DI (match_operand:DI 1 "arith_double_operand" "%r")
(match_operand:DI 2 "arith_double_operand" "rHI")))]
- ""
+ "! TARGET_V9"
"*
{
rtx op2 = operands[2];
}"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (xor:DI (match_operand:DI 1 "arith_double_operand" "%rJ")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "xor %r1,%2,%0")
+
(define_insn "xorsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(xor:SI (match_operand:SI 1 "arith_operand" "%rJ")
[(set (match_operand:DI 0 "register_operand" "=r")
(not:DI (xor:DI (match_operand:DI 1 "register_operand" "r")
(match_operand:DI 2 "register_operand" "r"))))]
- ""
+ "! TARGET_V9"
"xnor %1,%2,%0\;xnor %R1,%R2,%R0"
[(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (not:DI (xor:DI (match_operand:DI 1 "reg_or_0_operand" "rJ")
+ (match_operand:DI 2 "arith_double_operand" "rHI"))))]
+ "TARGET_V9"
+ "xnor %r1,%2,%0")
+
(define_insn ""
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (xor:SI (match_operand:SI 1 "reg_or_0_operand" "rJ")
"%A2cc %0,%1,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (match_operator:DI 2 "cc_arithop"
+ [(match_operand:DI 0 "arith_double_operand" "%r")
+ (match_operand:DI 1 "arith_double_operand" "rHI")])
+ (const_int 0)))]
+ "TARGET_V9"
+ "%A2cc %0,%1,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC 0)
(compare:CC
(const_int 0)))
(set (match_operand:SI 0 "register_operand" "=r")
(match_dup 3))]
- ""
+ ""
+ "%A3cc %1,%2,%0")
+
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (match_operator:DI 3 "cc_arithop"
+ [(match_operand:DI 1 "arith_double_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")])
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (match_dup 3))]
+ "TARGET_V9"
"%A3cc %1,%2,%0")
(define_insn ""
"xnorcc %r0,%1,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (not:DI (xor:DI (match_operand:DI 0 "reg_or_0_operand" "%rJ")
+ (match_operand:DI 1 "arith_double_operand" "rHI")))
+ (const_int 0)))]
+ "TARGET_V9"
+ "xnorcc %r0,%1,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC 0)
(compare:CC
""
"xnorcc %r1,%2,%0")
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (not:DI (xor:DI (match_operand:DI 1 "reg_or_0_operand" "%rJ")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (not:DI (xor:DI (match_dup 1) (match_dup 2))))]
+ "TARGET_V9"
+ "xnorcc %r1,%2,%0")
+
(define_insn ""
[(set (reg:CC 0)
(compare:CC
"%B2cc %r1,%0,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (match_operator:DI 2 "cc_arithopn"
+ [(not:DI (match_operand:DI 0 "arith_double_operand" "rHI"))
+ (match_operand:DI 1 "reg_or_0_operand" "rJ")])
+ (const_int 0)))]
+ "TARGET_V9"
+ "%B2cc %r1,%0,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC 0)
(compare:CC
""
"%B3cc %r2,%1,%0")
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX
+ (match_operator:DI 3 "cc_arithopn"
+ [(not:DI (match_operand:DI 1 "arith_double_operand" "rHI"))
+ (match_operand:DI 2 "reg_or_0_operand" "rJ")])
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (match_dup 3))]
+ "TARGET_V9"
+ "%B3cc %r2,%1,%0")
+
;; We cannot use the "neg" pseudo insn because the Sun assembler
;; does not know how to make it work for constants.
-(define_insn "negdi2"
+(define_expand "negdi2"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (neg:DI (match_operand:DI 1 "register_operand" "r")))]
+ ""
+ "
+{
+ if (! TARGET_V9)
+ {
+ emit_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (2,
+ gen_rtx (SET, VOIDmode, operand0,
+ gen_rtx (NEG, DImode, operand1)),
+ gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 0)))));
+ DONE;
+ }
+}")
+
+(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r")
(neg:DI (match_operand:DI 1 "register_operand" "r")))
(clobber (reg:SI 0))]
- ""
+ "! TARGET_V9"
"subcc %%g0,%R1,%R0\;subx %%g0,%1,%0"
[(set_attr "type" "unary")
(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (neg:DI (match_operand:DI 1 "register_operand" "r")))]
+ "TARGET_V9"
+ "sub %%g0,%1,%0"
+ [(set_attr "type" "unary")
+ (set_attr "length" "1")])
+
(define_insn "negsi2"
[(set (match_operand:SI 0 "general_operand" "=r")
(neg:SI (match_operand:SI 1 "arith_operand" "rI")))]
"subcc %%g0,%0,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX_NOOV 0)
+ (compare:CCX_NOOV (neg:DI (match_operand:DI 0 "arith_double_operand" "rHI"))
+ (const_int 0)))]
+ "TARGET_V9"
+ "subcc %%g0,%0,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC_NOOV 0)
(compare:CC_NOOV (neg:SI (match_operand:SI 1 "arith_operand" "rI"))
"subcc %%g0,%1,%0"
[(set_attr "type" "unary")])
+(define_insn ""
+ [(set (reg:CCX_NOOV 0)
+ (compare:CCX_NOOV (neg:DI (match_operand:DI 1 "arith_double_operand" "rHI"))
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (neg:DI (match_dup 1)))]
+ "TARGET_V9"
+ "subcc %%g0,%1,%0"
+ [(set_attr "type" "unary")])
+
;; We cannot use the "not" pseudo insn because the Sun assembler
;; does not know how to make it work for constants.
(define_expand "one_cmpldi2"
(define_insn ""
[(set (match_operand:DI 0 "register_operand" "=r")
(not:DI (match_operand:DI 1 "register_operand" "r")))]
- ""
+ "! TARGET_V9"
"xnor %%g0,%1,%0\;xnor %%g0,%R1,%R0"
[(set_attr "type" "unary")
(set_attr "length" "2")])
+(define_insn ""
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (not:DI (match_operand:DI 1 "arith_double_operand" "rHI")))]
+ "TARGET_V9"
+ "xnor %%g0,%1,%0"
+ [(set_attr "type" "unary")])
+
(define_insn "one_cmplsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (match_operand:SI 1 "arith_operand" "rI")))]
"xnorcc %%g0,%0,%%g0"
[(set_attr "type" "compare")])
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX (not:DI (match_operand:DI 0 "arith_double_operand" "rHI"))
+ (const_int 0)))]
+ "TARGET_V9"
+ "xnorcc %%g0,%0,%%g0"
+ [(set_attr "type" "compare")])
+
(define_insn ""
[(set (reg:CC 0)
(compare:CC (not:SI (match_operand:SI 1 "arith_operand" "rI"))
""
"xnorcc %%g0,%1,%0"
[(set_attr "type" "unary")])
+
+(define_insn ""
+ [(set (reg:CCX 0)
+ (compare:CCX (not:DI (match_operand:DI 1 "arith_double_operand" "rHI"))
+ (const_int 0)))
+ (set (match_operand:DI 0 "register_operand" "=r")
+ (not:DI (match_dup 1)))]
+ "TARGET_V9"
+ "xnorcc %%g0,%1,%0"
+ [(set_attr "type" "unary")])
\f
;; Floating point arithmetic instructions.
[(set (match_operand:DF 0 "register_operand" "=f")
(mult:DF (float_extend:DF (match_operand:SF 1 "register_operand" "f"))
(float_extend:DF (match_operand:SF 2 "register_operand" "f"))))]
- "TARGET_V8 && TARGET_FPU"
+ "(TARGET_V8 || TARGET_V9) && TARGET_FPU"
"fsmuld %1,%2,%0"
[(set_attr "type" "fpmul")])
[(set (match_operand:TF 0 "register_operand" "=f")
(mult:TF (float_extend:TF (match_operand:DF 1 "register_operand" "f"))
(float_extend:TF (match_operand:DF 2 "register_operand" "f"))))]
- "TARGET_V8 && TARGET_FPU"
+ "(TARGET_V8 || TARGET_V9) && TARGET_FPU"
"fdmulq %1,%2,%0"
[(set_attr "type" "fpmul")])
[(set (match_operand:TF 0 "register_operand" "=f,f")
(neg:TF (match_operand:TF 1 "register_operand" "0,f")))]
"TARGET_FPU"
- "@
- fnegs %0,%0
- fnegs %1,%0\;fmovs %R1,%R0\;fmovs %S1,%S0\;fmovs %T1,%T0"
+ "*
+{
+ if (TARGET_V9)
+ return \"fnegd %1,%0\"; /* Can't use fnegs, won't work with upper regs. */
+ else if (which_alternative == 0)
+ return \"fnegs %0,%0\";
+ else
+ return \"fnegs %1,%0\;fmovs %R1,%R0\;fmovs %S1,%S0\;fmovs %T1,%T0\";
+}"
[(set_attr "type" "fp")
- (set_attr "length" "1,4")])
+ (set_attr_alternative "length"
+ [(const_int 1)
+ (if_then_else (eq_attr "cpu" "cpu32bit") (const_int 4) (const_int 1))])])
(define_insn "negdf2"
[(set (match_operand:DF 0 "register_operand" "=f,f")
(neg:DF (match_operand:DF 1 "register_operand" "0,f")))]
"TARGET_FPU"
- "@
- fnegs %0,%0
- fnegs %1,%0\;fmovs %R1,%R0"
+ "*
+{
+ if (TARGET_V9)
+ return \"fnegd %1,%0\";
+ else if (which_alternative == 0)
+ return \"fnegs %0,%0\";
+ else
+ return \"fnegs %1,%0\;fmovs %R1,%R0\";
+}"
[(set_attr "type" "fp")
- (set_attr "length" "1,2")])
+ (set_attr_alternative "length"
+ [(const_int 1)
+ (if_then_else (eq_attr "cpu" "cpu32bit") (const_int 2) (const_int 1))])])
(define_insn "negsf2"
[(set (match_operand:SF 0 "register_operand" "=f")
[(set (match_operand:TF 0 "register_operand" "=f,f")
(abs:TF (match_operand:TF 1 "register_operand" "0,f")))]
"TARGET_FPU"
- "@
- fabss %0,%0
- fabss %1,%0\;fmovs %R1,%R0\;fmovs %S1,%S0\;fmovs %T1,%T0"
+ "*
+{
+ if (TARGET_V9)
+ return \"fabsd %1,%0\"; /* Can't use fabss, won't work with upper regs. */
+ else if (which_alternative == 0)
+ return \"fabss %0,%0\";
+ else
+ return \"fabss %1,%0\;fmovs %R1,%R0\;fmovs %S1,%S0\;fmovs %T1,%T0\";
+}"
[(set_attr "type" "fp")
- (set_attr "length" "1,4")])
+ (set_attr_alternative "length"
+ [(const_int 1)
+ (if_then_else (eq_attr "cpu" "cpu32bit") (const_int 4) (const_int 1))])])
(define_insn "absdf2"
[(set (match_operand:DF 0 "register_operand" "=f,f")
(abs:DF (match_operand:DF 1 "register_operand" "0,f")))]
"TARGET_FPU"
- "@
- fabss %0,%0
- fabss %1,%0\;fmovs %R1,%R0"
+ "*
+{
+ if (TARGET_V9)
+ return \"fabsd %1,%0\";
+ else if (which_alternative == 0)
+ return \"fabss %0,%0\";
+ else
+ return \"fabss %1,%0\;fmovs %R1,%R0\";
+}"
[(set_attr "type" "fp")
- (set_attr "length" "1,2")])
+ (set_attr_alternative "length"
+ [(const_int 1)
+ (if_then_else (eq_attr "cpu" "cpu32bit") (const_int 2) (const_int 1))])])
(define_insn "abssf2"
[(set (match_operand:SF 0 "register_operand" "=f")
return \"sll %1,%2,%0\";
}")
+(define_insn "ashldi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (ashift:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:SI 2 "arith_operand" "rI")))]
+ "TARGET_V9"
+ "*
+{
+ if (GET_CODE (operands[2]) == CONST_INT
+ && (unsigned) INTVAL (operands[2]) > 63)
+ operands[2] = GEN_INT (INTVAL (operands[2]) & 0x3f);
+
+ return \"sllx %1,%2,%0\";
+}")
+
(define_insn ""
[(set (reg:CC_NOOV 0)
(compare:CC_NOOV (ashift:SI (match_operand:SI 0 "register_operand" "r")
return \"sra %1,%2,%0\";
}")
+(define_insn "ashrdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (ashiftrt:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:SI 2 "arith_operand" "rI")))]
+ "TARGET_V9"
+ "*
+{
+ if (GET_CODE (operands[2]) == CONST_INT
+ && (unsigned) INTVAL (operands[2]) > 63)
+ operands[2] = GEN_INT (INTVAL (operands[2]) & 0x3f);
+
+ return \"srax %1,%2,%0\";
+}")
+
(define_insn "lshrsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(lshiftrt:SI (match_operand:SI 1 "register_operand" "r")
return \"srl %1,%2,%0\";
}")
+
+(define_insn "lshrdi3"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (lshiftrt:DI (match_operand:DI 1 "register_operand" "r")
+ (match_operand:SI 2 "arith_operand" "rI")))]
+ "TARGET_V9"
+ "*
+{
+ if (GET_CODE (operands[2]) == CONST_INT
+ && (unsigned) INTVAL (operands[2]) > 63)
+ operands[2] = GEN_INT (INTVAL (operands[2]) & 0x3f);
+
+ return \"srlx %1,%2,%0\";
+}")
\f
;; Unconditional and other jump instructions
;; On the Sparc, by setting the annul bit on an unconditional branch, the
[(set_attr "type" "uncond_branch")])
(define_expand "tablejump"
- [(parallel [(set (pc) (match_operand:SI 0 "register_operand" "r"))
+ [(parallel [(set (pc) (match_operand 0 "register_operand" "r"))
(use (label_ref (match_operand 1 "" "")))])]
""
"
{
+ if (GET_MODE (operands[0]) != Pmode)
+ abort ();
+
/* We need to use the PC value in %o7 that was set up when the address
of the label was loaded into a register, so we need different RTL. */
if (flag_pic)
{
- emit_insn (gen_pic_tablejump (operands[0], operands[1]));
+ if (!TARGET_PTR64)
+ emit_jump_insn (gen_pic_tablejump_32 (operands[0], operands[1]));
+ else
+ emit_jump_insn (gen_pic_tablejump_64 (operands[0], operands[1]));
DONE;
}
}")
-(define_insn "pic_tablejump"
+(define_insn "pic_tablejump_32"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))
(use (label_ref (match_operand 1 "" "")))
(use (reg:SI 15))]
- ""
+ "! TARGET_PTR64"
+ "jmp %%o7+%0%#"
+ [(set_attr "type" "uncond_branch")])
+
+(define_insn "pic_tablejump_64"
+ [(set (pc) (match_operand:DI 0 "register_operand" "r"))
+ (use (label_ref (match_operand 1 "" "")))
+ (use (reg:DI 15))]
+ "TARGET_PTR64"
"jmp %%o7+%0%#"
[(set_attr "type" "uncond_branch")])
(define_insn ""
[(set (pc) (match_operand:SI 0 "address_operand" "p"))
(use (label_ref (match_operand 1 "" "")))]
- ""
+ "! TARGET_PTR64"
+ "jmp %a0%#"
+ [(set_attr "type" "uncond_branch")])
+
+(define_insn ""
+ [(set (pc) (match_operand:DI 0 "address_operand" "p"))
+ (use (label_ref (match_operand 1 "" "")))]
+ "TARGET_PTR64"
"jmp %a0%#"
[(set_attr "type" "uncond_branch")])
(define_insn ""
[(set (pc) (label_ref (match_operand 0 "" "")))
(set (reg:SI 15) (label_ref (match_dup 0)))]
- ""
+ "! TARGET_PTR64"
+ "call %l0%#"
+ [(set_attr "type" "uncond_branch")])
+
+(define_insn ""
+ [(set (pc) (label_ref (match_operand 0 "" "")))
+ (set (reg:DI 15) (label_ref (match_dup 0)))]
+ "TARGET_PTR64"
"call %l0%#"
[(set_attr "type" "uncond_branch")])
(define_expand "call"
;; Note that this expression is not used for generating RTL.
;; All the RTL is generated explicitly below.
- [(call (match_operand:SI 0 "call_operand" "")
+ [(call (match_operand 0 "call_operand" "")
(match_operand 3 "" "i"))]
;; operands[2] is next_arg_register
;; operands[3] is struct_value_size_rtx.
{
rtx fn_rtx, nregs_rtx;
- if (GET_CODE (XEXP (operands[0], 0)) == LABEL_REF)
+ if (GET_MODE (operands[0]) != FUNCTION_MODE)
+ abort ();
+
+ if (GET_CODE (XEXP (operands[0], 0)) == LABEL_REF)
{
/* This is really a PIC sequence. We want to represent
it as a funny jump so it's delay slots can be filled.
call-clobbered registers? We lose this if it is a JUMP_INSN.
Why cannot we have delay slots filled if it were a CALL? */
- if (INTVAL (operands[3]) > 0)
+ if (! TARGET_V9 && INTVAL (operands[3]) > 0)
emit_jump_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (3,
gen_rtx (SET, VOIDmode, pc_rtx,
XEXP (operands[0], 0)),
operands[3],
gen_rtx (CLOBBER, VOIDmode,
- gen_rtx (REG, SImode, 15)))));
+ gen_rtx (REG, Pmode, 15)))));
else
emit_jump_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (2,
gen_rtx (SET, VOIDmode, pc_rtx,
XEXP (operands[0], 0)),
gen_rtx (CLOBBER, VOIDmode,
- gen_rtx (REG, SImode, 15)))));
+ gen_rtx (REG, Pmode, 15)))));
goto finish_call;
}
nregs_rtx = const0_rtx;
#endif
- if (INTVAL (operands[3]) > 0)
+ if (! TARGET_V9 && INTVAL (operands[3]) > 0)
emit_call_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (3,
gen_rtx (CALL, VOIDmode, fn_rtx, nregs_rtx),
operands[3],
gen_rtx (CLOBBER, VOIDmode,
- gen_rtx (REG, SImode, 15)))));
+ gen_rtx (REG, Pmode, 15)))));
else
emit_call_insn (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (2,
gen_rtx (CALL, VOIDmode, fn_rtx, nregs_rtx),
gen_rtx (CLOBBER, VOIDmode,
- gen_rtx (REG, SImode, 15)))));
+ gen_rtx (REG, Pmode, 15)))));
finish_call:
#if 0
/* If this call wants a structure value,
emit an unimp insn to let the called function know about this. */
- if (INTVAL (operands[3]) > 0)
+ if (! TARGET_V9 && INTVAL (operands[3]) > 0)
{
rtx insn = emit_insn (operands[3]);
SCHED_GROUP_P (insn) = 1;
(match_operand 1 "" ""))
(clobber (reg:SI 15))]
;;- Do not use operand 1 for most machines.
- ""
+ "! TARGET_PTR64"
"*
{
return \"call %a0,%1%#\";
(match_operand 1 "" ""))
(clobber (reg:SI 15))]
;;- Do not use operand 1 for most machines.
- ""
+ "! TARGET_PTR64"
+ "*
+{
+ return \"call %a0,%1%#\";
+}"
+ [(set_attr "type" "call")])
+
+(define_insn ""
+ [(call (mem:SI (match_operand:DI 0 "address_operand" "p"))
+ (match_operand 1 "" ""))
+ (clobber (reg:DI 15))]
+ ;;- Do not use operand 1 for most machines.
+ "TARGET_PTR64"
+ "*
+{
+ return \"call %a0,%1%#\";
+}"
+ [(set_attr "type" "call")])
+
+(define_insn ""
+ [(call (mem:SI (match_operand:DI 0 "immediate_operand" "i"))
+ (match_operand 1 "" ""))
+ (clobber (reg:DI 15))]
+ ;;- Do not use operand 1 for most machines.
+ "TARGET_PTR64"
"*
{
return \"call %a0,%1%#\";
[(set_attr "type" "call")])
;; This is a call that wants a structure value.
+;; There is no such critter for v9 (??? we may need one anyway).
(define_insn ""
[(call (mem:SI (match_operand:SI 0 "address_operand" "p"))
(match_operand 1 "" ""))
(match_operand 2 "immediate_operand" "")
(clobber (reg:SI 15))]
;;- Do not use operand 1 for most machines.
- "GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) > 0"
+ "! TARGET_V9 && GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) > 0"
"*
{
return \"call %a0,%1\;nop\;unimp %2\";
[(set_attr "type" "call_no_delay_slot")])
;; This is a call that wants a structure value.
+;; There is no such critter for v9 (??? we may need one anyway).
(define_insn ""
[(call (mem:SI (match_operand:SI 0 "immediate_operand" "i"))
(match_operand 1 "" ""))
(match_operand 2 "immediate_operand" "")
(clobber (reg:SI 15))]
;;- Do not use operand 1 for most machines.
- "GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) > 0"
+ "! TARGET_V9 && GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) > 0"
"*
{
return \"call %a0,%1\;nop\;unimp %2\";
[(set_attr "type" "call_no_delay_slot")])
(define_expand "call_value"
+ ;; Note that this expression is not used for generating RTL.
+ ;; All the RTL is generated explicitly below.
[(set (match_operand 0 "register_operand" "=rf")
(call (match_operand:SI 1 "" "")
(match_operand 4 "" "")))]
+ ;; operand 2 is stack_size_rtx
;; operand 3 is next_arg_register
""
"
rtx fn_rtx, nregs_rtx;
rtvec vec;
+ if (GET_MODE (operands[1]) != FUNCTION_MODE)
+ abort ();
+
fn_rtx = operands[1];
#if 0
vec = gen_rtvec (2,
gen_rtx (SET, VOIDmode, operands[0],
gen_rtx (CALL, VOIDmode, fn_rtx, nregs_rtx)),
- gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, SImode, 15)));
+ gen_rtx (CLOBBER, VOIDmode, gen_rtx (REG, Pmode, 15)));
emit_call_insn (gen_rtx (PARALLEL, VOIDmode, vec));
(match_operand 2 "" "")))
(clobber (reg:SI 15))]
;;- Do not use operand 2 for most machines.
- ""
+ "! TARGET_PTR64"
"*
{
return \"call %a1,%2%#\";
(match_operand 2 "" "")))
(clobber (reg:SI 15))]
;;- Do not use operand 2 for most machines.
- ""
+ "! TARGET_PTR64"
+ "*
+{
+ return \"call %a1,%2%#\";
+}"
+ [(set_attr "type" "call")])
+
+(define_insn ""
+ [(set (match_operand 0 "" "=rf")
+ (call (mem:SI (match_operand:DI 1 "address_operand" "p"))
+ (match_operand 2 "" "")))
+ (clobber (reg:DI 15))]
+ ;;- Do not use operand 2 for most machines.
+ "TARGET_PTR64"
+ "*
+{
+ return \"call %a1,%2%#\";
+}"
+ [(set_attr "type" "call")])
+
+(define_insn ""
+ [(set (match_operand 0 "" "=rf")
+ (call (mem:SI (match_operand:DI 1 "immediate_operand" "i"))
+ (match_operand 2 "" "")))
+ (clobber (reg:DI 15))]
+ ;;- Do not use operand 2 for most machines.
+ "TARGET_PTR64"
"*
{
return \"call %a1,%2%#\";
(const_int 0))
(match_operand:BLK 1 "memory_operand" "")
(match_operand 2 "" "")
+;; ??? v9: mode is wrong here.
(clobber (reg:SI 15))])]
""
"
(match_operand:DI 1 "memory_operand" "o")
(match_operand 2 "" "")
(clobber (reg:SI 15))]
- ""
+ "! TARGET_V9"
"*
{
operands[2] = adj_offsettable_operand (operands[1], 8);
}"
[(set_attr "type" "multi")])
+;; V9 version of untyped_call.
+
+(define_insn ""
+ [(call (mem:SI (match_operand:DI 0 "address_operand" "p"))
+ (const_int 0))
+ (match_operand:DI 1 "memory_operand" "o")
+ (match_operand 2 "" "")
+;; ??? Mode is wrong here, but it must match the define_expand.
+ (clobber (reg:SI 15))]
+ "TARGET_V9"
+ "*
+{
+ operands[2] = adj_offsettable_operand (operands[1], 8);
+ return \"call %a0,0\;nop\;stx %%o0,%1\;stq %%f0,%2\";
+}"
+ [(set_attr "type" "multi")])
+
+(define_insn ""
+ [(call (mem:SI (match_operand:DI 0 "immediate_operand" "i"))
+ (const_int 0))
+ (match_operand:DI 1 "memory_operand" "o")
+ (match_operand 2 "" "")
+;; ??? Mode is wrong here, but it must match the define_expand.
+ (clobber (reg:SI 15))]
+ "TARGET_V9"
+ "*
+{
+ operands[2] = adj_offsettable_operand (operands[1], 8);
+ return \"call %a0,0\;nop\;stx %%o0,%1\;stq %%f0,%2\";
+}"
+ [(set_attr "type" "multi")])
+
;; Prepare to return any type including a structure value.
(define_expand "untyped_return"
"
{
rtx valreg1 = gen_rtx (REG, DImode, 24);
- rtx valreg2 = gen_rtx (REG, DFmode, 32);
+ rtx valreg2 = gen_rtx (REG, TARGET_V9 ? TFmode : DFmode, 32);
rtx result = operands[0];
- rtx rtnreg = gen_rtx (REG, SImode, (leaf_function ? 15 : 31));
- rtx value = gen_reg_rtx (SImode);
- /* Fetch the instruction where we will return to and see if it's an unimp
- instruction (the most significant 10 bits will be zero). If so,
- update the return address to skip the unimp instruction. */
- emit_move_insn (value,
- gen_rtx (MEM, SImode, plus_constant (rtnreg, 8)));
- emit_insn (gen_lshrsi3 (value, value, GEN_INT (22)));
- emit_insn (gen_update_return (rtnreg, value));
+ if (! TARGET_V9)
+ {
+ rtx rtnreg = gen_rtx (REG, SImode, (leaf_function ? 15 : 31));
+ rtx value = gen_reg_rtx (SImode);
+
+ /* Fetch the instruction where we will return to and see if it's an unimp
+ instruction (the most significant 10 bits will be zero). If so,
+ update the return address to skip the unimp instruction. */
+ emit_move_insn (value,
+ gen_rtx (MEM, SImode, plus_constant (rtnreg, 8)));
+ emit_insn (gen_lshrsi3 (value, value, GEN_INT (22)));
+ emit_insn (gen_update_return (rtnreg, value));
+ }
/* Reload the function value registers. */
emit_move_insn (valreg1, change_address (result, DImode, XEXP (result, 0)));
emit_move_insn (valreg2,
- change_address (result, DFmode,
+ change_address (result, TARGET_V9 ? TFmode : DFmode,
plus_constant (XEXP (result, 0), 8)));
/* Put USE insns before the return. */
(define_insn "update_return"
[(unspec:SI [(match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "register_operand" "r")] 0)]
- ""
+ "! TARGET_V9"
"cmp %1,0\;be,a .+8\;add %0,4,%0"
[(set_attr "type" "multi")])
\f
""
"nop")
-(define_insn "indirect_jump"
- [(set (pc) (match_operand:SI 0 "address_operand" "p"))]
+(define_expand "indirect_jump"
+ [(set (pc) (match_operand 0 "address_operand" "p"))]
""
+ "")
+
+(define_insn ""
+ [(set (pc) (match_operand:SI 0 "address_operand" "p"))]
+ "! TARGET_PTR64"
"jmp %a0%#"
[(set_attr "type" "uncond_branch")])
+(define_insn ""
+ [(set (pc) (match_operand:DI 0 "address_operand" "p"))]
+ "TARGET_PTR64"
+ "jmp %a0%#"
+ [(set_attr "type" "uncond_branch")])
+
+;; ??? This doesn't handle v9 yet. It also doesn't work with -mflat.
(define_expand "nonlocal_goto"
[(match_operand:SI 0 "general_operand" "")
(match_operand:SI 1 "general_operand" "")
(define_insn "flush_register_windows"
[(unspec_volatile [(const_int 0)] 0)]
""
- "ta 3"
+ "* return TARGET_V9 ? \"flushw\" : \"ta 3\";"
[(set_attr "type" "misc")])
(define_insn "goto_handler_and_restore"
(define_insn "flush"
[(unspec_volatile [(match_operand 0 "" "")] 2)]
""
- "iflush %a0"
+ "* return TARGET_V9 ? \"flush %a0\" : \"iflush %a0\";"
[(set_attr "type" "misc")])
\f
;; find first set.
"sub %%g0,%1,%0\;and %0,%1,%0\;scan %0,0,%0\;mov 32,%2\;sub %2,%0,%0\;sra %0,31,%2\;and %2,31,%2\;add %2,%0,%0"
[(set_attr "type" "multi")
(set_attr "length" "8")])
+
+;; ??? This should be a define expand, so that the extra instruction have
+;; a chance of being optimized away.
+
+(define_insn "ffsdi2"
+ [(set (match_operand:DI 0 "register_operand" "=&r")
+ (ffs:DI (match_operand:DI 1 "register_operand" "r")))
+ (clobber (match_scratch:DI 2 "=&r"))]
+ "TARGET_V9"
+ "neg %1,%2\;not %2,%2\;xor %1,%2,%2\;popc %2,%0\;movrz %1,%%g0,%0"
+ [(set_attr "type" "multi")
+ (set_attr "length" "5")])
\f
;; Split up troublesome insns for better scheduling. */
;; somewhat bogus, but they avoid extra patterns and show data dependency.
;; Nothing will look at these in detail after splitting has occurred.
+;; ??? v9 DImode versions are missing because addc and subc use %icc.
+
(define_split
[(set (match_operand:SI 0 "register_operand" "")
- (ne:SI (match_operand:SI 1 "register_operand" "") (const_int 0)))
+ (ne:SI (match_operand:SI 1 "register_operand" "")
+ (const_int 0)))
(clobber (reg:CC 0))]
""
[(set (reg:CC_NOOV 0) (compare:CC_NOOV (neg:SI (match_dup 1))
(define_split
[(set (match_operand:SI 0 "register_operand" "")
- (eq:SI (match_operand:SI 1 "register_operand" "") (const_int 0)))
+ (eq:SI (match_operand:SI 1 "register_operand" "")
+ (const_int 0)))
(clobber (reg:CC 0))]
""
[(set (reg:CC_NOOV 0) (compare:CC_NOOV (neg:SI (match_dup 1))
(match_operand:SI 1 "memory_operand" ""))
(set (match_operand:SI 2 "register_operand" "=rf")
(match_operand:SI 3 "memory_operand" ""))]
- "registers_ok_for_ldd_peep (operands[0], operands[2])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[0], operands[2])
&& ! MEM_VOLATILE_P (operands[1]) && ! MEM_VOLATILE_P (operands[3])
&& addrs_ok_for_ldd_peep (XEXP (operands[1], 0), XEXP (operands[3], 0))"
"ldd %1,%0")
(match_operand:SI 1 "register_operand" "rf"))
(set (match_operand:SI 2 "memory_operand" "")
(match_operand:SI 3 "register_operand" "rf"))]
- "registers_ok_for_ldd_peep (operands[1], operands[3])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[1], operands[3])
&& ! MEM_VOLATILE_P (operands[0]) && ! MEM_VOLATILE_P (operands[2])
&& addrs_ok_for_ldd_peep (XEXP (operands[0], 0), XEXP (operands[2], 0))"
"std %1,%0")
(match_operand:SF 1 "memory_operand" ""))
(set (match_operand:SF 2 "register_operand" "=fr")
(match_operand:SF 3 "memory_operand" ""))]
- "registers_ok_for_ldd_peep (operands[0], operands[2])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[0], operands[2])
&& ! MEM_VOLATILE_P (operands[1]) && ! MEM_VOLATILE_P (operands[3])
&& addrs_ok_for_ldd_peep (XEXP (operands[1], 0), XEXP (operands[3], 0))"
"ldd %1,%0")
(match_operand:SF 1 "register_operand" "fr"))
(set (match_operand:SF 2 "memory_operand" "")
(match_operand:SF 3 "register_operand" "fr"))]
- "registers_ok_for_ldd_peep (operands[1], operands[3])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[1], operands[3])
&& ! MEM_VOLATILE_P (operands[0]) && ! MEM_VOLATILE_P (operands[2])
&& addrs_ok_for_ldd_peep (XEXP (operands[0], 0), XEXP (operands[2], 0))"
"std %1,%0")
(match_operand:SI 1 "memory_operand" ""))
(set (match_operand:SI 2 "register_operand" "=rf")
(match_operand:SI 3 "memory_operand" ""))]
- "registers_ok_for_ldd_peep (operands[2], operands[0])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[2], operands[0])
&& ! MEM_VOLATILE_P (operands[3]) && ! MEM_VOLATILE_P (operands[1])
&& addrs_ok_for_ldd_peep (XEXP (operands[3], 0), XEXP (operands[1], 0))"
"ldd %3,%2")
(match_operand:SI 1 "register_operand" "rf"))
(set (match_operand:SI 2 "memory_operand" "")
(match_operand:SI 3 "register_operand" "rf"))]
- "registers_ok_for_ldd_peep (operands[3], operands[1])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[3], operands[1])
&& ! MEM_VOLATILE_P (operands[2]) && ! MEM_VOLATILE_P (operands[0])
&& addrs_ok_for_ldd_peep (XEXP (operands[2], 0), XEXP (operands[0], 0))"
"std %3,%2")
(match_operand:SF 1 "memory_operand" ""))
(set (match_operand:SF 2 "register_operand" "=fr")
(match_operand:SF 3 "memory_operand" ""))]
- "registers_ok_for_ldd_peep (operands[2], operands[0])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[2], operands[0])
&& ! MEM_VOLATILE_P (operands[3]) && ! MEM_VOLATILE_P (operands[1])
&& addrs_ok_for_ldd_peep (XEXP (operands[3], 0), XEXP (operands[1], 0))"
"ldd %3,%2")
(match_operand:SF 1 "register_operand" "fr"))
(set (match_operand:SF 2 "memory_operand" "")
(match_operand:SF 3 "register_operand" "fr"))]
- "registers_ok_for_ldd_peep (operands[3], operands[1])
+ "! TARGET_V9
+ && registers_ok_for_ldd_peep (operands[3], operands[1])
&& ! MEM_VOLATILE_P (operands[2]) && ! MEM_VOLATILE_P (operands[0])
&& addrs_ok_for_ldd_peep (XEXP (operands[2], 0), XEXP (operands[0], 0))"
"std %3,%2")
&& ! FP_REG_P (operands[0]) && ! FP_REG_P (operands[1])"
"orcc %1,%%g0,%0")
+(define_peephole
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (match_operand:DI 1 "register_operand" "r"))
+ (set (reg:CCX 0)
+ (compare:CCX (match_operand:DI 2 "register_operand" "r")
+ (const_int 0)))]
+ "TARGET_V9
+ && (rtx_equal_p (operands[2], operands[0])
+ || rtx_equal_p (operands[2], operands[1]))
+ && ! FP_REG_P (operands[0]) && ! FP_REG_P (operands[1])"
+ "orcc %1,%%g0,%0")
+
;; Do {sign,zero}-extended compares somewhat more efficiently.
;; ??? Is this now the Right Way to do this? Or will SCRATCH
;; eventually have some impact here?
""
"ldsh %1,%0\;orcc %0,%%g0,%2")
+(define_peephole
+ [(set (match_operand:HI 0 "register_operand" "")
+ (match_operand:HI 1 "memory_operand" ""))
+ (set (match_operand:DI 2 "register_operand" "")
+ (sign_extend:DI (match_dup 0)))
+ (set (reg:CCX 0)
+ (compare:CCX (match_dup 2)
+ (const_int 0)))]
+ "TARGET_V9"
+ "ldsh %1,%0\;orcc %0,%%g0,%2")
+
(define_peephole
[(set (match_operand:QI 0 "register_operand" "")
(match_operand:QI 1 "memory_operand" ""))
""
"ldsb %1,%0\;orcc %0,%%g0,%2")
+(define_peephole
+ [(set (match_operand:QI 0 "register_operand" "")
+ (match_operand:QI 1 "memory_operand" ""))
+ (set (match_operand:DI 2 "register_operand" "")
+ (sign_extend:DI (match_dup 0)))
+ (set (reg:CCX 0)
+ (compare:CCX (match_dup 2)
+ (const_int 0)))]
+ "TARGET_V9"
+ "ldsb %1,%0\;orcc %0,%%g0,%2")
+
(define_peephole
[(set (match_operand:HI 0 "register_operand" "")
(match_operand:HI 1 "memory_operand" ""))
}")
;; Floating-point move peepholes
+;; ??? v9: Do we want similar ones?
(define_peephole
[(set (match_operand:SI 0 "register_operand" "=r")
"! TARGET_EPILOGUE"
"*
{
- if (current_function_returns_struct)
+ if (! TARGET_V9 && current_function_returns_struct)
return \"jmp %%i7+12\;restore %%g0,%1,%Y0\";
else
return \"ret\;restore %%g0,%1,%Y0\";
"! TARGET_EPILOGUE"
"*
{
- if (current_function_returns_struct)
+ if (! TARGET_V9 && current_function_returns_struct)
return \"jmp %%i7+12\;restore %%g0,%1,%Y0\";
else
return \"ret\;restore %%g0,%1,%Y0\";
"! TARGET_EPILOGUE"
"*
{
- if (current_function_returns_struct)
+ if (! TARGET_V9 && current_function_returns_struct)
return \"jmp %%i7+12\;restore %%g0,%1,%Y0\";
else
return \"ret\;restore %%g0,%1,%Y0\";
"! TARGET_FPU && ! TARGET_EPILOGUE"
"*
{
- if (current_function_returns_struct)
+ if (! TARGET_V9 && current_function_returns_struct)
return \"jmp %%i7+12\;restore %%g0,%1,%Y0\";
else
return \"ret\;restore %%g0,%1,%Y0\";
"! TARGET_EPILOGUE"
"*
{
- if (current_function_returns_struct)
+ if (! TARGET_V9 && current_function_returns_struct)
return \"jmp %%i7+12\;restore %r1,%2,%Y0\";
else
return \"ret\;restore %r1,%2,%Y0\";
}"
[(set_attr "type" "multi")])
+(define_insn ""
+ [(set (match_operand:DI 0 "restore_operand" "")
+ (match_operand:DI 1 "arith_double_operand" "rHI"))
+ (return)]
+ "TARGET_V9 && ! TARGET_EPILOGUE"
+ "ret\;restore %%g0,%1,%Y0"
+ [(set_attr "type" "multi")])
+
+(define_insn ""
+ [(set (match_operand:DI 0 "restore_operand" "")
+ (plus:DI (match_operand:DI 1 "arith_operand" "%r")
+ (match_operand:DI 2 "arith_double_operand" "rHI")))
+ (return)]
+ "TARGET_V9 && ! TARGET_EPILOGUE"
+ "ret\;restore %r1,%2,%Y0"
+ [(set_attr "type" "multi")])
+
;; Turned off because it should never match (subtracting a constant
;; is turned into addition) and because it would do the wrong thing
;; when operand 2 is -4096 (--4096 == 4096 is not a valid immediate).
"ret\;fmovs %0,%%f0"
[(set_attr "type" "multi")])
-;; Now peepholes to go a call followed by a jump.
+;; Now peepholes to do a call followed by a jump.
(define_peephole
[(parallel [(set (match_operand 0 "" "")
return \"call %a0,%1\;add %%o7,(%l2-.-4),%%o7\";
}")
+(define_peephole
+ [(parallel [(set (match_operand 0 "" "")
+ (call (mem:SI (match_operand:DI 1 "call_operand_address" "pi"))
+ (match_operand 2 "" "")))
+ (clobber (reg:DI 15))])
+ (set (pc) (label_ref (match_operand 3 "" "")))]
+ "TARGET_V9 && short_branch (INSN_UID (insn), INSN_UID (operands[3]))"
+ "*
+{
+ return \"call %a1,%2\;add %%o7,(%l3-.-4),%%o7\";
+}")
+
+(define_peephole
+ [(parallel [(call (mem:SI (match_operand:DI 0 "call_operand_address" "pi"))
+ (match_operand 1 "" ""))
+ (clobber (reg:DI 15))])
+ (set (pc) (label_ref (match_operand 2 "" "")))]
+ "TARGET_V9 && short_branch (INSN_UID (insn), INSN_UID (operands[2]))"
+ "*
+{
+ return \"call %a0,%1\;add %%o7,(%l2-.-4),%%o7\";
+}")
+
+;; Other miscellaneous peepholes.
+
(define_peephole
[(parallel [(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "reg_or_0_operand" "rJ")