}
}
+/* Return one if PC is in the call path of a trampoline, else return zero.
+
+ Note we return one for *any* call trampoline (long-call, arg-reloc), not
+ just shared library trampolines (import, export). */
+
+static int
+hppa32_hpux_in_solib_call_trampoline (CORE_ADDR pc, char *name)
+{
+ struct minimal_symbol *minsym;
+ struct unwind_table_entry *u;
+ static CORE_ADDR dyncall = 0;
+ static CORE_ADDR sr4export = 0;
+
+ /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+ new exec file */
+
+ /* First see if PC is in one of the two C-library trampolines. */
+ if (!dyncall)
+ {
+ minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
+ if (minsym)
+ dyncall = SYMBOL_VALUE_ADDRESS (minsym);
+ else
+ dyncall = -1;
+ }
+
+ if (!sr4export)
+ {
+ minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+ if (minsym)
+ sr4export = SYMBOL_VALUE_ADDRESS (minsym);
+ else
+ sr4export = -1;
+ }
+
+ if (pc == dyncall || pc == sr4export)
+ return 1;
+
+ minsym = lookup_minimal_symbol_by_pc (pc);
+ if (minsym && strcmp (DEPRECATED_SYMBOL_NAME (minsym), ".stub") == 0)
+ return 1;
+
+ /* Get the unwind descriptor corresponding to PC, return zero
+ if no unwind was found. */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
+
+ /* If this isn't a linker stub, then return now. */
+ if (u->stub_unwind.stub_type == 0)
+ return 0;
+
+ /* By definition a long-branch stub is a call stub. */
+ if (u->stub_unwind.stub_type == LONG_BRANCH)
+ return 1;
+
+ /* The call and return path execute the same instructions within
+ an IMPORT stub! So an IMPORT stub is both a call and return
+ trampoline. */
+ if (u->stub_unwind.stub_type == IMPORT)
+ return 1;
+
+ /* Parameter relocation stubs always have a call path and may have a
+ return path. */
+ if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
+ || u->stub_unwind.stub_type == EXPORT)
+ {
+ CORE_ADDR addr;
+
+ /* Search forward from the current PC until we hit a branch
+ or the end of the stub. */
+ for (addr = pc; addr <= u->region_end; addr += 4)
+ {
+ unsigned long insn;
+
+ insn = read_memory_integer (addr, 4);
+
+ /* Does it look like a bl? If so then it's the call path, if
+ we find a bv or be first, then we're on the return path. */
+ if ((insn & 0xfc00e000) == 0xe8000000)
+ return 1;
+ else if ((insn & 0xfc00e001) == 0xe800c000
+ || (insn & 0xfc000000) == 0xe0000000)
+ return 0;
+ }
+
+ /* Should never happen. */
+ warning ("Unable to find branch in parameter relocation stub.\n");
+ return 0;
+ }
+
+ /* Unknown stub type. For now, just return zero. */
+ return 0;
+}
+
+static int
+hppa64_hpux_in_solib_call_trampoline (CORE_ADDR pc, char *name)
+{
+ /* PA64 has a completely different stub/trampoline scheme. Is it
+ better? Maybe. It's certainly harder to determine with any
+ certainty that we are in a stub because we can not refer to the
+ unwinders to help.
+
+ The heuristic is simple. Try to lookup the current PC value in th
+ minimal symbol table. If that fails, then assume we are not in a
+ stub and return.
+
+ Then see if the PC value falls within the section bounds for the
+ section containing the minimal symbol we found in the first
+ step. If it does, then assume we are not in a stub and return.
+
+ Finally peek at the instructions to see if they look like a stub. */
+ struct minimal_symbol *minsym;
+ asection *sec;
+ CORE_ADDR addr;
+ int insn, i;
+
+ minsym = lookup_minimal_symbol_by_pc (pc);
+ if (! minsym)
+ return 0;
+
+ sec = SYMBOL_BFD_SECTION (minsym);
+
+ if (bfd_get_section_vma (sec->owner, sec) <= pc
+ && pc < (bfd_get_section_vma (sec->owner, sec)
+ + bfd_section_size (sec->owner, sec)))
+ return 0;
+
+ /* We might be in a stub. Peek at the instructions. Stubs are 3
+ instructions long. */
+ insn = read_memory_integer (pc, 4);
+
+ /* Find out where we think we are within the stub. */
+ if ((insn & 0xffffc00e) == 0x53610000)
+ addr = pc;
+ else if ((insn & 0xffffffff) == 0xe820d000)
+ addr = pc - 4;
+ else if ((insn & 0xffffc00e) == 0x537b0000)
+ addr = pc - 8;
+ else
+ return 0;
+
+ /* Now verify each insn in the range looks like a stub instruction. */
+ insn = read_memory_integer (addr, 4);
+ if ((insn & 0xffffc00e) != 0x53610000)
+ return 0;
+
+ /* Now verify each insn in the range looks like a stub instruction. */
+ insn = read_memory_integer (addr + 4, 4);
+ if ((insn & 0xffffffff) != 0xe820d000)
+ return 0;
+
+ /* Now verify each insn in the range looks like a stub instruction. */
+ insn = read_memory_integer (addr + 8, 4);
+ if ((insn & 0xffffc00e) != 0x537b0000)
+ return 0;
+
+ /* Looks like a stub. */
+ return 1;
+}
+
+/* Return one if PC is in the return path of a trampoline, else return zero.
+
+ Note we return one for *any* call trampoline (long-call, arg-reloc), not
+ just shared library trampolines (import, export). */
+
+static int
+hppa_hpux_in_solib_return_trampoline (CORE_ADDR pc, char *name)
+{
+ struct unwind_table_entry *u;
+
+ /* Get the unwind descriptor corresponding to PC, return zero
+ if no unwind was found. */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
+
+ /* If this isn't a linker stub or it's just a long branch stub, then
+ return zero. */
+ if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH)
+ return 0;
+
+ /* The call and return path execute the same instructions within
+ an IMPORT stub! So an IMPORT stub is both a call and return
+ trampoline. */
+ if (u->stub_unwind.stub_type == IMPORT)
+ return 1;
+
+ /* Parameter relocation stubs always have a call path and may have a
+ return path. */
+ if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
+ || u->stub_unwind.stub_type == EXPORT)
+ {
+ CORE_ADDR addr;
+
+ /* Search forward from the current PC until we hit a branch
+ or the end of the stub. */
+ for (addr = pc; addr <= u->region_end; addr += 4)
+ {
+ unsigned long insn;
+
+ insn = read_memory_integer (addr, 4);
+
+ /* Does it look like a bl? If so then it's the call path, if
+ we find a bv or be first, then we're on the return path. */
+ if ((insn & 0xfc00e000) == 0xe8000000)
+ return 0;
+ else if ((insn & 0xfc00e001) == 0xe800c000
+ || (insn & 0xfc000000) == 0xe0000000)
+ return 1;
+ }
+
+ /* Should never happen. */
+ warning ("Unable to find branch in parameter relocation stub.\n");
+ return 0;
+ }
+
+ /* Unknown stub type. For now, just return zero. */
+ return 0;
+
+}
+
+/* Figure out if PC is in a trampoline, and if so find out where
+ the trampoline will jump to. If not in a trampoline, return zero.
+
+ Simple code examination probably is not a good idea since the code
+ sequences in trampolines can also appear in user code.
+
+ We use unwinds and information from the minimal symbol table to
+ determine when we're in a trampoline. This won't work for ELF
+ (yet) since it doesn't create stub unwind entries. Whether or
+ not ELF will create stub unwinds or normal unwinds for linker
+ stubs is still being debated.
+
+ This should handle simple calls through dyncall or sr4export,
+ long calls, argument relocation stubs, and dyncall/sr4export
+ calling an argument relocation stub. It even handles some stubs
+ used in dynamic executables. */
+
+static CORE_ADDR
+hppa_hpux_skip_trampoline_code (CORE_ADDR pc)
+{
+ long orig_pc = pc;
+ long prev_inst, curr_inst, loc;
+ static CORE_ADDR dyncall = 0;
+ static CORE_ADDR dyncall_external = 0;
+ static CORE_ADDR sr4export = 0;
+ struct minimal_symbol *msym;
+ struct unwind_table_entry *u;
+
+ /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+ new exec file */
+
+ if (!dyncall)
+ {
+ msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
+ if (msym)
+ dyncall = SYMBOL_VALUE_ADDRESS (msym);
+ else
+ dyncall = -1;
+ }
+
+ if (!dyncall_external)
+ {
+ msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL);
+ if (msym)
+ dyncall_external = SYMBOL_VALUE_ADDRESS (msym);
+ else
+ dyncall_external = -1;
+ }
+
+ if (!sr4export)
+ {
+ msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+ if (msym)
+ sr4export = SYMBOL_VALUE_ADDRESS (msym);
+ else
+ sr4export = -1;
+ }
+
+ /* Addresses passed to dyncall may *NOT* be the actual address
+ of the function. So we may have to do something special. */
+ if (pc == dyncall)
+ {
+ pc = (CORE_ADDR) read_register (22);
+
+ /* If bit 30 (counting from the left) is on, then pc is the address of
+ the PLT entry for this function, not the address of the function
+ itself. Bit 31 has meaning too, but only for MPE. */
+ if (pc & 0x2)
+ pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
+ }
+ if (pc == dyncall_external)
+ {
+ pc = (CORE_ADDR) read_register (22);
+ pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
+ }
+ else if (pc == sr4export)
+ pc = (CORE_ADDR) (read_register (22));
+
+ /* Get the unwind descriptor corresponding to PC, return zero
+ if no unwind was found. */
+ u = find_unwind_entry (pc);
+ if (!u)
+ return 0;
+
+ /* If this isn't a linker stub, then return now. */
+ /* elz: attention here! (FIXME) because of a compiler/linker
+ error, some stubs which should have a non zero stub_unwind.stub_type
+ have unfortunately a value of zero. So this function would return here
+ as if we were not in a trampoline. To fix this, we go look at the partial
+ symbol information, which reports this guy as a stub.
+ (FIXME): Unfortunately, we are not that lucky: it turns out that the
+ partial symbol information is also wrong sometimes. This is because
+ when it is entered (somread.c::som_symtab_read()) it can happen that
+ if the type of the symbol (from the som) is Entry, and the symbol is
+ in a shared library, then it can also be a trampoline. This would
+ be OK, except that I believe the way they decide if we are ina shared library
+ does not work. SOOOO..., even if we have a regular function w/o trampolines
+ its minimal symbol can be assigned type mst_solib_trampoline.
+ Also, if we find that the symbol is a real stub, then we fix the unwind
+ descriptor, and define the stub type to be EXPORT.
+ Hopefully this is correct most of the times. */
+ if (u->stub_unwind.stub_type == 0)
+ {
+
+/* elz: NOTE (FIXME!) once the problem with the unwind information is fixed
+ we can delete all the code which appears between the lines */
+/*--------------------------------------------------------------------------*/
+ msym = lookup_minimal_symbol_by_pc (pc);
+
+ if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline)
+ return orig_pc == pc ? 0 : pc & ~0x3;
+
+ else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline)
+ {
+ struct objfile *objfile;
+ struct minimal_symbol *msymbol;
+ int function_found = 0;
+
+ /* go look if there is another minimal symbol with the same name as
+ this one, but with type mst_text. This would happen if the msym
+ is an actual trampoline, in which case there would be another
+ symbol with the same name corresponding to the real function */
+
+ ALL_MSYMBOLS (objfile, msymbol)
+ {
+ if (MSYMBOL_TYPE (msymbol) == mst_text
+ && DEPRECATED_STREQ (DEPRECATED_SYMBOL_NAME (msymbol), DEPRECATED_SYMBOL_NAME (msym)))
+ {
+ function_found = 1;
+ break;
+ }
+ }
+
+ if (function_found)
+ /* the type of msym is correct (mst_solib_trampoline), but
+ the unwind info is wrong, so set it to the correct value */
+ u->stub_unwind.stub_type = EXPORT;
+ else
+ /* the stub type info in the unwind is correct (this is not a
+ trampoline), but the msym type information is wrong, it
+ should be mst_text. So we need to fix the msym, and also
+ get out of this function */
+ {
+ MSYMBOL_TYPE (msym) = mst_text;
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+ }
+
+/*--------------------------------------------------------------------------*/
+ }
+
+ /* It's a stub. Search for a branch and figure out where it goes.
+ Note we have to handle multi insn branch sequences like ldil;ble.
+ Most (all?) other branches can be determined by examining the contents
+ of certain registers and the stack. */
+
+ loc = pc;
+ curr_inst = 0;
+ prev_inst = 0;
+ while (1)
+ {
+ /* Make sure we haven't walked outside the range of this stub. */
+ if (u != find_unwind_entry (loc))
+ {
+ warning ("Unable to find branch in linker stub");
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+
+ prev_inst = curr_inst;
+ curr_inst = read_memory_integer (loc, 4);
+
+ /* Does it look like a branch external using %r1? Then it's the
+ branch from the stub to the actual function. */
+ if ((curr_inst & 0xffe0e000) == 0xe0202000)
+ {
+ /* Yup. See if the previous instruction loaded
+ a value into %r1. If so compute and return the jump address. */
+ if ((prev_inst & 0xffe00000) == 0x20200000)
+ return (hppa_extract_21 (prev_inst) + hppa_extract_17 (curr_inst)) & ~0x3;
+ else
+ {
+ warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+ }
+
+ /* Does it look like a be 0(sr0,%r21)? OR
+ Does it look like a be, n 0(sr0,%r21)? OR
+ Does it look like a bve (r21)? (this is on PA2.0)
+ Does it look like a bve, n(r21)? (this is also on PA2.0)
+ That's the branch from an
+ import stub to an export stub.
+
+ It is impossible to determine the target of the branch via
+ simple examination of instructions and/or data (consider
+ that the address in the plabel may be the address of the
+ bind-on-reference routine in the dynamic loader).
+
+ So we have try an alternative approach.
+
+ Get the name of the symbol at our current location; it should
+ be a stub symbol with the same name as the symbol in the
+ shared library.
+
+ Then lookup a minimal symbol with the same name; we should
+ get the minimal symbol for the target routine in the shared
+ library as those take precedence of import/export stubs. */
+ if ((curr_inst == 0xe2a00000) ||
+ (curr_inst == 0xe2a00002) ||
+ (curr_inst == 0xeaa0d000) ||
+ (curr_inst == 0xeaa0d002))
+ {
+ struct minimal_symbol *stubsym, *libsym;
+
+ stubsym = lookup_minimal_symbol_by_pc (loc);
+ if (stubsym == NULL)
+ {
+ warning ("Unable to find symbol for 0x%lx", loc);
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+
+ libsym = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (stubsym), NULL, NULL);
+ if (libsym == NULL)
+ {
+ warning ("Unable to find library symbol for %s\n",
+ DEPRECATED_SYMBOL_NAME (stubsym));
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+
+ return SYMBOL_VALUE (libsym);
+ }
+
+ /* Does it look like bl X,%rp or bl X,%r0? Another way to do a
+ branch from the stub to the actual function. */
+ /*elz */
+ else if ((curr_inst & 0xffe0e000) == 0xe8400000
+ || (curr_inst & 0xffe0e000) == 0xe8000000
+ || (curr_inst & 0xffe0e000) == 0xe800A000)
+ return (loc + hppa_extract_17 (curr_inst) + 8) & ~0x3;
+
+ /* Does it look like bv (rp)? Note this depends on the
+ current stack pointer being the same as the stack
+ pointer in the stub itself! This is a branch on from the
+ stub back to the original caller. */
+ /*else if ((curr_inst & 0xffe0e000) == 0xe840c000) */
+ else if ((curr_inst & 0xffe0f000) == 0xe840c000)
+ {
+ /* Yup. See if the previous instruction loaded
+ rp from sp - 8. */
+ if (prev_inst == 0x4bc23ff1)
+ return (read_memory_integer
+ (read_register (HPPA_SP_REGNUM) - 8, 4)) & ~0x3;
+ else
+ {
+ warning ("Unable to find restore of %%rp before bv (%%rp).");
+ return orig_pc == pc ? 0 : pc & ~0x3;
+ }
+ }
+
+ /* elz: added this case to capture the new instruction
+ at the end of the return part of an export stub used by
+ the PA2.0: BVE, n (rp) */
+ else if ((curr_inst & 0xffe0f000) == 0xe840d000)
+ {
+ return (read_memory_integer
+ (read_register (HPPA_SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
+ }
+
+ /* What about be,n 0(sr0,%rp)? It's just another way we return to
+ the original caller from the stub. Used in dynamic executables. */
+ else if (curr_inst == 0xe0400002)
+ {
+ /* The value we jump to is sitting in sp - 24. But that's
+ loaded several instructions before the be instruction.
+ I guess we could check for the previous instruction being
+ mtsp %r1,%sr0 if we want to do sanity checking. */
+ return (read_memory_integer
+ (read_register (HPPA_SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
+ }
+
+ /* Haven't found the branch yet, but we're still in the stub.
+ Keep looking. */
+ loc += 4;
+ }
+}
+
+
/* Exception handling support for the HP-UX ANSI C++ compiler.
The compiler (aCC) provides a callback for exception events;
GDB can set a breakpoint on this callback and find out what
static void
hppa_hpux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
set_gdbarch_deprecated_pc_in_sigtramp (gdbarch, hppa_hpux_pc_in_sigtramp);
+
+ if (tdep->bytes_per_address == 4)
+ set_gdbarch_in_solib_call_trampoline (gdbarch,
+ hppa32_hpux_in_solib_call_trampoline);
+ else
+ set_gdbarch_in_solib_call_trampoline (gdbarch,
+ hppa64_hpux_in_solib_call_trampoline);
+
+ set_gdbarch_in_solib_return_trampoline (gdbarch,
+ hppa_hpux_in_solib_return_trampoline);
+ set_gdbarch_skip_trampoline_code (gdbarch, hppa_hpux_skip_trampoline_code);
}
static void
#define UNWIND_ENTRY_SIZE 16
#define STUB_UNWIND_ENTRY_SIZE 8
-static int get_field (unsigned word, int from, int to);
-
-static int extract_5_load (unsigned int);
-
-static unsigned extract_5R_store (unsigned int);
-
-static unsigned extract_5r_store (unsigned int);
-
-struct unwind_table_entry *find_unwind_entry (CORE_ADDR);
-
-static int extract_17 (unsigned int);
-
-static int extract_21 (unsigned);
-
-static int extract_14 (unsigned);
-
static void unwind_command (char *, int);
-static int low_sign_extend (unsigned int, unsigned int);
-
-static int sign_extend (unsigned int, unsigned int);
-
static int hppa_alignof (struct type *);
static int prologue_inst_adjust_sp (unsigned long);
/* This assumes that no garbage lies outside of the lower bits of
value. */
-static int
-sign_extend (unsigned val, unsigned bits)
+int
+hppa_sign_extend (unsigned val, unsigned bits)
{
return (int) (val >> (bits - 1) ? (-1 << bits) | val : val);
}
/* For many immediate values the sign bit is the low bit! */
-static int
-low_sign_extend (unsigned val, unsigned bits)
+int
+hppa_low_hppa_sign_extend (unsigned val, unsigned bits)
{
return (int) ((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
}
/* Extract the bits at positions between FROM and TO, using HP's numbering
(MSB = 0). */
-static int
-get_field (unsigned word, int from, int to)
+int
+hppa_get_field (unsigned word, int from, int to)
{
return ((word) >> (31 - (to)) & ((1 << ((to) - (from) + 1)) - 1));
}
/* extract the immediate field from a ld{bhw}s instruction */
-static int
-extract_5_load (unsigned word)
+int
+hppa_extract_5_load (unsigned word)
{
- return low_sign_extend (word >> 16 & MASK_5, 5);
+ return hppa_low_hppa_sign_extend (word >> 16 & MASK_5, 5);
}
/* extract the immediate field from a break instruction */
-static unsigned
-extract_5r_store (unsigned word)
+unsigned
+hppa_extract_5r_store (unsigned word)
{
return (word & MASK_5);
}
/* extract the immediate field from a {sr}sm instruction */
-static unsigned
-extract_5R_store (unsigned word)
+unsigned
+hppa_extract_5R_store (unsigned word)
{
return (word >> 16 & MASK_5);
}
/* extract a 14 bit immediate field */
-static int
-extract_14 (unsigned word)
+int
+hppa_extract_14 (unsigned word)
{
- return low_sign_extend (word & MASK_14, 14);
+ return hppa_low_hppa_sign_extend (word & MASK_14, 14);
}
/* extract a 21 bit constant */
-static int
-extract_21 (unsigned word)
+int
+hppa_extract_21 (unsigned word)
{
int val;
word &= MASK_21;
word <<= 11;
- val = get_field (word, 20, 20);
+ val = hppa_get_field (word, 20, 20);
val <<= 11;
- val |= get_field (word, 9, 19);
+ val |= hppa_get_field (word, 9, 19);
val <<= 2;
- val |= get_field (word, 5, 6);
+ val |= hppa_get_field (word, 5, 6);
val <<= 5;
- val |= get_field (word, 0, 4);
+ val |= hppa_get_field (word, 0, 4);
val <<= 2;
- val |= get_field (word, 7, 8);
- return sign_extend (val, 21) << 11;
+ val |= hppa_get_field (word, 7, 8);
+ return hppa_sign_extend (val, 21) << 11;
}
/* extract a 17 bit constant from branch instructions, returning the
19 bit signed value. */
-static int
-extract_17 (unsigned word)
+int
+hppa_extract_17 (unsigned word)
{
- return sign_extend (get_field (word, 19, 28) |
- get_field (word, 29, 29) << 10 |
- get_field (word, 11, 15) << 11 |
+ return hppa_sign_extend (hppa_get_field (word, 19, 28) |
+ hppa_get_field (word, 29, 29) << 10 |
+ hppa_get_field (word, 11, 15) << 11 |
(word & 0x1) << 16, 17) << 2;
}
\f
}
}
-/* Return one if PC is in the call path of a trampoline, else return zero.
-
- Note we return one for *any* call trampoline (long-call, arg-reloc), not
- just shared library trampolines (import, export). */
-
-static int
-hppa_in_solib_call_trampoline (CORE_ADDR pc, char *name)
-{
- struct minimal_symbol *minsym;
- struct unwind_table_entry *u;
- static CORE_ADDR dyncall = 0;
- static CORE_ADDR sr4export = 0;
-
-#ifdef GDB_TARGET_IS_HPPA_20W
- /* PA64 has a completely different stub/trampoline scheme. Is it
- better? Maybe. It's certainly harder to determine with any
- certainty that we are in a stub because we can not refer to the
- unwinders to help.
-
- The heuristic is simple. Try to lookup the current PC value in th
- minimal symbol table. If that fails, then assume we are not in a
- stub and return.
-
- Then see if the PC value falls within the section bounds for the
- section containing the minimal symbol we found in the first
- step. If it does, then assume we are not in a stub and return.
-
- Finally peek at the instructions to see if they look like a stub. */
- {
- struct minimal_symbol *minsym;
- asection *sec;
- CORE_ADDR addr;
- int insn, i;
-
- minsym = lookup_minimal_symbol_by_pc (pc);
- if (! minsym)
- return 0;
-
- sec = SYMBOL_BFD_SECTION (minsym);
-
- if (bfd_get_section_vma (sec->owner, sec) <= pc
- && pc < (bfd_get_section_vma (sec->owner, sec)
- + bfd_section_size (sec->owner, sec)))
- return 0;
-
- /* We might be in a stub. Peek at the instructions. Stubs are 3
- instructions long. */
- insn = read_memory_integer (pc, 4);
-
- /* Find out where we think we are within the stub. */
- if ((insn & 0xffffc00e) == 0x53610000)
- addr = pc;
- else if ((insn & 0xffffffff) == 0xe820d000)
- addr = pc - 4;
- else if ((insn & 0xffffc00e) == 0x537b0000)
- addr = pc - 8;
- else
- return 0;
-
- /* Now verify each insn in the range looks like a stub instruction. */
- insn = read_memory_integer (addr, 4);
- if ((insn & 0xffffc00e) != 0x53610000)
- return 0;
-
- /* Now verify each insn in the range looks like a stub instruction. */
- insn = read_memory_integer (addr + 4, 4);
- if ((insn & 0xffffffff) != 0xe820d000)
- return 0;
-
- /* Now verify each insn in the range looks like a stub instruction. */
- insn = read_memory_integer (addr + 8, 4);
- if ((insn & 0xffffc00e) != 0x537b0000)
- return 0;
-
- /* Looks like a stub. */
- return 1;
- }
-#endif
-
- /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
- new exec file */
-
- /* First see if PC is in one of the two C-library trampolines. */
- if (!dyncall)
- {
- minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
- if (minsym)
- dyncall = SYMBOL_VALUE_ADDRESS (minsym);
- else
- dyncall = -1;
- }
-
- if (!sr4export)
- {
- minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
- if (minsym)
- sr4export = SYMBOL_VALUE_ADDRESS (minsym);
- else
- sr4export = -1;
- }
-
- if (pc == dyncall || pc == sr4export)
- return 1;
-
- minsym = lookup_minimal_symbol_by_pc (pc);
- if (minsym && strcmp (DEPRECATED_SYMBOL_NAME (minsym), ".stub") == 0)
- return 1;
-
- /* Get the unwind descriptor corresponding to PC, return zero
- if no unwind was found. */
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
-
- /* If this isn't a linker stub, then return now. */
- if (u->stub_unwind.stub_type == 0)
- return 0;
-
- /* By definition a long-branch stub is a call stub. */
- if (u->stub_unwind.stub_type == LONG_BRANCH)
- return 1;
-
- /* The call and return path execute the same instructions within
- an IMPORT stub! So an IMPORT stub is both a call and return
- trampoline. */
- if (u->stub_unwind.stub_type == IMPORT)
- return 1;
-
- /* Parameter relocation stubs always have a call path and may have a
- return path. */
- if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
- || u->stub_unwind.stub_type == EXPORT)
- {
- CORE_ADDR addr;
-
- /* Search forward from the current PC until we hit a branch
- or the end of the stub. */
- for (addr = pc; addr <= u->region_end; addr += 4)
- {
- unsigned long insn;
-
- insn = read_memory_integer (addr, 4);
-
- /* Does it look like a bl? If so then it's the call path, if
- we find a bv or be first, then we're on the return path. */
- if ((insn & 0xfc00e000) == 0xe8000000)
- return 1;
- else if ((insn & 0xfc00e001) == 0xe800c000
- || (insn & 0xfc000000) == 0xe0000000)
- return 0;
- }
-
- /* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n");
- return 0;
- }
-
- /* Unknown stub type. For now, just return zero. */
- return 0;
-}
-
-/* Return one if PC is in the return path of a trampoline, else return zero.
-
- Note we return one for *any* call trampoline (long-call, arg-reloc), not
- just shared library trampolines (import, export). */
-
-static int
-hppa_in_solib_return_trampoline (CORE_ADDR pc, char *name)
-{
- struct unwind_table_entry *u;
-
- /* Get the unwind descriptor corresponding to PC, return zero
- if no unwind was found. */
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
-
- /* If this isn't a linker stub or it's just a long branch stub, then
- return zero. */
- if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH)
- return 0;
-
- /* The call and return path execute the same instructions within
- an IMPORT stub! So an IMPORT stub is both a call and return
- trampoline. */
- if (u->stub_unwind.stub_type == IMPORT)
- return 1;
-
- /* Parameter relocation stubs always have a call path and may have a
- return path. */
- if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
- || u->stub_unwind.stub_type == EXPORT)
- {
- CORE_ADDR addr;
-
- /* Search forward from the current PC until we hit a branch
- or the end of the stub. */
- for (addr = pc; addr <= u->region_end; addr += 4)
- {
- unsigned long insn;
-
- insn = read_memory_integer (addr, 4);
-
- /* Does it look like a bl? If so then it's the call path, if
- we find a bv or be first, then we're on the return path. */
- if ((insn & 0xfc00e000) == 0xe8000000)
- return 0;
- else if ((insn & 0xfc00e001) == 0xe800c000
- || (insn & 0xfc000000) == 0xe0000000)
- return 1;
- }
-
- /* Should never happen. */
- warning ("Unable to find branch in parameter relocation stub.\n");
- return 0;
- }
-
- /* Unknown stub type. For now, just return zero. */
- return 0;
-
-}
-
-/* Figure out if PC is in a trampoline, and if so find out where
- the trampoline will jump to. If not in a trampoline, return zero.
-
- Simple code examination probably is not a good idea since the code
- sequences in trampolines can also appear in user code.
-
- We use unwinds and information from the minimal symbol table to
- determine when we're in a trampoline. This won't work for ELF
- (yet) since it doesn't create stub unwind entries. Whether or
- not ELF will create stub unwinds or normal unwinds for linker
- stubs is still being debated.
-
- This should handle simple calls through dyncall or sr4export,
- long calls, argument relocation stubs, and dyncall/sr4export
- calling an argument relocation stub. It even handles some stubs
- used in dynamic executables. */
-
-static CORE_ADDR
-hppa_skip_trampoline_code (CORE_ADDR pc)
-{
- long orig_pc = pc;
- long prev_inst, curr_inst, loc;
- static CORE_ADDR dyncall = 0;
- static CORE_ADDR dyncall_external = 0;
- static CORE_ADDR sr4export = 0;
- struct minimal_symbol *msym;
- struct unwind_table_entry *u;
-
- /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
- new exec file */
-
- if (!dyncall)
- {
- msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
- if (msym)
- dyncall = SYMBOL_VALUE_ADDRESS (msym);
- else
- dyncall = -1;
- }
-
- if (!dyncall_external)
- {
- msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL);
- if (msym)
- dyncall_external = SYMBOL_VALUE_ADDRESS (msym);
- else
- dyncall_external = -1;
- }
-
- if (!sr4export)
- {
- msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
- if (msym)
- sr4export = SYMBOL_VALUE_ADDRESS (msym);
- else
- sr4export = -1;
- }
-
- /* Addresses passed to dyncall may *NOT* be the actual address
- of the function. So we may have to do something special. */
- if (pc == dyncall)
- {
- pc = (CORE_ADDR) read_register (22);
-
- /* If bit 30 (counting from the left) is on, then pc is the address of
- the PLT entry for this function, not the address of the function
- itself. Bit 31 has meaning too, but only for MPE. */
- if (pc & 0x2)
- pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
- }
- if (pc == dyncall_external)
- {
- pc = (CORE_ADDR) read_register (22);
- pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8);
- }
- else if (pc == sr4export)
- pc = (CORE_ADDR) (read_register (22));
-
- /* Get the unwind descriptor corresponding to PC, return zero
- if no unwind was found. */
- u = find_unwind_entry (pc);
- if (!u)
- return 0;
-
- /* If this isn't a linker stub, then return now. */
- /* elz: attention here! (FIXME) because of a compiler/linker
- error, some stubs which should have a non zero stub_unwind.stub_type
- have unfortunately a value of zero. So this function would return here
- as if we were not in a trampoline. To fix this, we go look at the partial
- symbol information, which reports this guy as a stub.
- (FIXME): Unfortunately, we are not that lucky: it turns out that the
- partial symbol information is also wrong sometimes. This is because
- when it is entered (somread.c::som_symtab_read()) it can happen that
- if the type of the symbol (from the som) is Entry, and the symbol is
- in a shared library, then it can also be a trampoline. This would
- be OK, except that I believe the way they decide if we are ina shared library
- does not work. SOOOO..., even if we have a regular function w/o trampolines
- its minimal symbol can be assigned type mst_solib_trampoline.
- Also, if we find that the symbol is a real stub, then we fix the unwind
- descriptor, and define the stub type to be EXPORT.
- Hopefully this is correct most of the times. */
- if (u->stub_unwind.stub_type == 0)
- {
-
-/* elz: NOTE (FIXME!) once the problem with the unwind information is fixed
- we can delete all the code which appears between the lines */
-/*--------------------------------------------------------------------------*/
- msym = lookup_minimal_symbol_by_pc (pc);
-
- if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline)
- return orig_pc == pc ? 0 : pc & ~0x3;
-
- else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline)
- {
- struct objfile *objfile;
- struct minimal_symbol *msymbol;
- int function_found = 0;
-
- /* go look if there is another minimal symbol with the same name as
- this one, but with type mst_text. This would happen if the msym
- is an actual trampoline, in which case there would be another
- symbol with the same name corresponding to the real function */
-
- ALL_MSYMBOLS (objfile, msymbol)
- {
- if (MSYMBOL_TYPE (msymbol) == mst_text
- && DEPRECATED_STREQ (DEPRECATED_SYMBOL_NAME (msymbol), DEPRECATED_SYMBOL_NAME (msym)))
- {
- function_found = 1;
- break;
- }
- }
-
- if (function_found)
- /* the type of msym is correct (mst_solib_trampoline), but
- the unwind info is wrong, so set it to the correct value */
- u->stub_unwind.stub_type = EXPORT;
- else
- /* the stub type info in the unwind is correct (this is not a
- trampoline), but the msym type information is wrong, it
- should be mst_text. So we need to fix the msym, and also
- get out of this function */
- {
- MSYMBOL_TYPE (msym) = mst_text;
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
- }
-
-/*--------------------------------------------------------------------------*/
- }
-
- /* It's a stub. Search for a branch and figure out where it goes.
- Note we have to handle multi insn branch sequences like ldil;ble.
- Most (all?) other branches can be determined by examining the contents
- of certain registers and the stack. */
-
- loc = pc;
- curr_inst = 0;
- prev_inst = 0;
- while (1)
- {
- /* Make sure we haven't walked outside the range of this stub. */
- if (u != find_unwind_entry (loc))
- {
- warning ("Unable to find branch in linker stub");
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
-
- prev_inst = curr_inst;
- curr_inst = read_memory_integer (loc, 4);
-
- /* Does it look like a branch external using %r1? Then it's the
- branch from the stub to the actual function. */
- if ((curr_inst & 0xffe0e000) == 0xe0202000)
- {
- /* Yup. See if the previous instruction loaded
- a value into %r1. If so compute and return the jump address. */
- if ((prev_inst & 0xffe00000) == 0x20200000)
- return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3;
- else
- {
- warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
- }
-
- /* Does it look like a be 0(sr0,%r21)? OR
- Does it look like a be, n 0(sr0,%r21)? OR
- Does it look like a bve (r21)? (this is on PA2.0)
- Does it look like a bve, n(r21)? (this is also on PA2.0)
- That's the branch from an
- import stub to an export stub.
-
- It is impossible to determine the target of the branch via
- simple examination of instructions and/or data (consider
- that the address in the plabel may be the address of the
- bind-on-reference routine in the dynamic loader).
-
- So we have try an alternative approach.
-
- Get the name of the symbol at our current location; it should
- be a stub symbol with the same name as the symbol in the
- shared library.
-
- Then lookup a minimal symbol with the same name; we should
- get the minimal symbol for the target routine in the shared
- library as those take precedence of import/export stubs. */
- if ((curr_inst == 0xe2a00000) ||
- (curr_inst == 0xe2a00002) ||
- (curr_inst == 0xeaa0d000) ||
- (curr_inst == 0xeaa0d002))
- {
- struct minimal_symbol *stubsym, *libsym;
-
- stubsym = lookup_minimal_symbol_by_pc (loc);
- if (stubsym == NULL)
- {
- warning ("Unable to find symbol for 0x%lx", loc);
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
-
- libsym = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (stubsym), NULL, NULL);
- if (libsym == NULL)
- {
- warning ("Unable to find library symbol for %s\n",
- DEPRECATED_SYMBOL_NAME (stubsym));
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
-
- return SYMBOL_VALUE (libsym);
- }
-
- /* Does it look like bl X,%rp or bl X,%r0? Another way to do a
- branch from the stub to the actual function. */
- /*elz */
- else if ((curr_inst & 0xffe0e000) == 0xe8400000
- || (curr_inst & 0xffe0e000) == 0xe8000000
- || (curr_inst & 0xffe0e000) == 0xe800A000)
- return (loc + extract_17 (curr_inst) + 8) & ~0x3;
-
- /* Does it look like bv (rp)? Note this depends on the
- current stack pointer being the same as the stack
- pointer in the stub itself! This is a branch on from the
- stub back to the original caller. */
- /*else if ((curr_inst & 0xffe0e000) == 0xe840c000) */
- else if ((curr_inst & 0xffe0f000) == 0xe840c000)
- {
- /* Yup. See if the previous instruction loaded
- rp from sp - 8. */
- if (prev_inst == 0x4bc23ff1)
- return (read_memory_integer
- (read_register (HPPA_SP_REGNUM) - 8, 4)) & ~0x3;
- else
- {
- warning ("Unable to find restore of %%rp before bv (%%rp).");
- return orig_pc == pc ? 0 : pc & ~0x3;
- }
- }
-
- /* elz: added this case to capture the new instruction
- at the end of the return part of an export stub used by
- the PA2.0: BVE, n (rp) */
- else if ((curr_inst & 0xffe0f000) == 0xe840d000)
- {
- return (read_memory_integer
- (read_register (HPPA_SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
- }
-
- /* What about be,n 0(sr0,%rp)? It's just another way we return to
- the original caller from the stub. Used in dynamic executables. */
- else if (curr_inst == 0xe0400002)
- {
- /* The value we jump to is sitting in sp - 24. But that's
- loaded several instructions before the be instruction.
- I guess we could check for the previous instruction being
- mtsp %r1,%sr0 if we want to do sanity checking. */
- return (read_memory_integer
- (read_register (HPPA_SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3;
- }
-
- /* Haven't found the branch yet, but we're still in the stub.
- Keep looking. */
- loc += 4;
- }
-}
-
-
/* For the given instruction (INST), return any adjustment it makes
to the stack pointer or zero for no adjustment.
/* The most common way to perform a stack adjustment ldo X(sp),sp */
if ((inst & 0xffffc000) == 0x37de0000)
- return extract_14 (inst);
+ return hppa_extract_14 (inst);
/* stwm X,D(sp) */
if ((inst & 0xffe00000) == 0x6fc00000)
- return extract_14 (inst);
+ return hppa_extract_14 (inst);
/* std,ma X,D(sp) */
if ((inst & 0xffe00008) == 0x73c00008)
save high bits in save_high21 for later use. */
if ((inst & 0xffe00000) == 0x28200000)
{
- save_high21 = extract_21 (inst);
+ save_high21 = hppa_extract_21 (inst);
return 0;
}
if ((inst & 0xffff0000) == 0x343e0000)
- return save_high21 + extract_14 (inst);
+ return save_high21 + hppa_extract_14 (inst);
/* fstws as used by the HP compilers. */
if ((inst & 0xffffffe0) == 0x2fd01220)
- return extract_5_load (inst);
+ return hppa_extract_5_load (inst);
/* No adjustment. */
return 0;
|| (inst >> 26) == 0x1f
|| ((inst >> 26) == 0x1f
&& ((inst >> 6) == 0xa)))
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* Does it look like a std? */
if ((inst >> 26) == 0x1c
|| ((inst >> 26) == 0x03
&& ((inst >> 6) & 0xf) == 0xb))
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* Does it look like a stwm? GCC & HPC may use this in prologues. */
if ((inst >> 26) == 0x1b)
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* Does it look like sth or stb? HPC versions 9.0 and later use these
too. */
|| ((inst >> 26) == 0x3
&& (((inst >> 6) & 0xf) == 0x8
|| (inst >> 6) & 0xf) == 0x9))
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
return 0;
}
{
/* is this an FSTD ? */
if ((inst & 0xfc00dfc0) == 0x2c001200)
- return extract_5r_store (inst);
+ return hppa_extract_5r_store (inst);
if ((inst & 0xfc000002) == 0x70000002)
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
/* is this an FSTW ? */
if ((inst & 0xfc00df80) == 0x24001200)
- return extract_5r_store (inst);
+ return hppa_extract_5r_store (inst);
if ((inst & 0xfc000002) == 0x7c000000)
- return extract_5R_store (inst);
+ return hppa_extract_5R_store (inst);
return 0;
}
&& (!u->Save_SP || reg != HPPA_FP_REGNUM))
{
saved_gr_mask &= ~(1 << reg);
- if ((inst >> 26) == 0x1b && extract_14 (inst) >= 0)
+ if ((inst >> 26) == 0x1b && hppa_extract_14 (inst) >= 0)
/* stwm with a positive displacement is a _post_
_modify_. */
cache->saved_regs[reg].addr = 0;
if ((inst >> 26) == 0x1c)
offset = (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3);
else if ((inst >> 26) == 0x03)
- offset = low_sign_extend (inst & 0x1f, 5);
+ offset = hppa_low_hppa_sign_extend (inst & 0x1f, 5);
else
- offset = extract_14 (inst);
+ offset = hppa_extract_14 (inst);
/* Handle code with and without frame pointers. */
if (u->Save_SP)
/* ldo X(%r3),%r1 or ldo X(%r30),%r1. */
if ((inst & 0xffffc000) == 0x34610000
|| (inst & 0xffffc000) == 0x37c10000)
- fp_loc = extract_14 (inst);
+ fp_loc = hppa_extract_14 (inst);
reg = inst_saves_fr (inst);
if (reg >= 12 && reg <= 21)
/* The following gdbarch vector elements do not depend on the address
size, or in any other gdbarch element previously set. */
set_gdbarch_skip_prologue (gdbarch, hppa_skip_prologue);
- set_gdbarch_skip_trampoline_code (gdbarch, hppa_skip_trampoline_code);
- set_gdbarch_in_solib_call_trampoline (gdbarch, hppa_in_solib_call_trampoline);
- set_gdbarch_in_solib_return_trampoline (gdbarch,
- hppa_in_solib_return_trampoline);
set_gdbarch_inner_than (gdbarch, core_addr_greaterthan);
set_gdbarch_sp_regnum (gdbarch, HPPA_SP_REGNUM);
set_gdbarch_fp0_regnum (gdbarch, HPPA_FP0_REGNUM);
projects / binutils-gdb.git / commitdiff