just pretend these didn't get committed.

diff --git a/gdb/testsuite/gdb.arch/e500-abi.exp~ b/gdb/testsuite/gdb.arch/e500-abi.exp~
deleted file mode 100644 (file)
index ed13f2a..0000000
--- a/gdb/testsuite/gdb.arch/e500-abi.exp~
+++ /dev/null
@@ -1,94 +0,0 @@
-# Copyright 2003 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-#
-
-# Tests for Powerpc e500 ABI
-
-
-if $tracelevel then {
-    strace $tracelevel
-}
-
-#
-# This file uses e500-abi.c for input.
-#
-
-set prms_id 0
-set bug_id 0
-
-if ![istarget "powerpc-*eabispe"] then {
-    verbose "Skipping e500 abi tests."
-    return
-}
-
-set testfile "e500-abi"
-set binfile ${objdir}/${subdir}/${testfile}
-
-set src1 ${srcdir}/${subdir}/${testfile}.c
-
-if  { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } {
-     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-}
-
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-#
-# Run to `main' where we begin our tests.
-#
-
-if ![runto_main] then {
-    gdb_suppress_tests
-}
-
-gdb_test "b marker" "Breakpoint 2 at.*file.*e500-abi.c, line \[0-9\]+." "break marker"
-gdb_test "continue" "Breakpoint 2.*marker.*e500-abi.c.*" "continue to marker"
-gdb_test "finish" "Run till exit from .0.*marker.*at.*e500-abi.c.*main \\(\\) at.*e500-abi.c.*res_vec = vec_func \\(a_vec,.*goes in r3.*" "back to main (1)"
-
-# now all the arguments of vec_func are initialized
-
-set pattern "vec_func .a_vec_f=.0, 55., b_vec_f=.0, 66., c_vec_f=.3.14.*2.18.*, d_vec_f=.5, 4., e_vec_f=.5, 6., f_vec_f=.6, 6, 7, 1., g_vec_f=.6, 6, 7, 9., h_vec_f=.3, 2., i_vec_f=.3, 2., l_vec_f=.3, 5., m_vec_f=.6, 9.."
-
-set pattern1 $pattern
-append pattern1 " at.*e500-abi.c.*x = 2;"
-
-# Now let's call the function.  This function has > 8 args,
-# the last ones will go on the stack.
-gdb_test "p vec_func(a_vec,b_vec,c_vec,d_vec,e_vec,f_vec,g_vec,h_vec,i_vec,l_vec,m_vec)" \
-".\[0-9\]+ = .6, 63." "call inferior function with vectors (1) "
-
-# Let's call the function again with dummy arguments.  This is to clean
-# up the contents of the ev registers before the next call.
-gdb_test "p vec_func(a_vec_d,b_vec_d,c_vec_d,d_vec_d,e_vec_d,f_vec_d,g_vec_d,h_vec_d,i_vec_d,l_vec_d,m_vec_d)" \
-".\[0-9\]+ = .1, 1." "call inferior function with vectors (2) "
-
-# Let's step into the function, to see if the args are printed correctly.
-gdb_test "step" \
-  $pattern1 \
-  "step into vec_func"
-
-set pattern2 $pattern
-append pattern2 " at.*e500-abi.c.*main.*res_vec = vec_func .a_vec,.*goes in r3.*Value returned is.*= .6, 63."
-
-# Let's see if the result is returned correctly.
-gdb_test "finish" \
-  "Run till exit from .0.*$pattern2" \
-  "vector value returned correctly"
-

diff --git a/gdb/testsuite/gdb.arch/e500-regs.exp~ b/gdb/testsuite/gdb.arch/e500-regs.exp~
deleted file mode 100644 (file)
index 97cb52c..0000000
--- a/gdb/testsuite/gdb.arch/e500-regs.exp~
+++ /dev/null
@@ -1,229 +0,0 @@
-# Copyright 2003 Free Software Foundation, Inc.
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, 
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-#
-
-# Tests for Powerpc E500 register setting and fetching
-
-if $tracelevel then {
-    strace $tracelevel
-}
-
-#
-# Test the use of registers, especially E500 registers, for Powerpc.
-# This file uses e500-regs.c for input.
-#
-
-set prms_id 0
-set bug_id 0
-
-if ![istarget "powerpc-*eabispe"] then {
-    verbose "Skipping e500 register tests."
-    return
-}
-
-set testfile "e500-regs"
-set binfile ${objdir}/${subdir}/${testfile}
-set src1 ${srcdir}/${subdir}/${testfile}.c
-
-if  { [gdb_compile ${src1} ${binfile} executable {debug additional_flags=-w}] != "" } {
-     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-}
-
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-#
-# Run to `main' where we begin our tests.
-#
-
-if ![runto_main] then {
-    gdb_suppress_tests
-}
-
-# set all the registers integer portions to 1
-for {set i 0} {$i < 32} {incr i 1} {
-        for {set j 0} {$j < 2} {incr j 1} {
-           gdb_test "set \$ev$i.v2_int32\[$j\] = 1" "" "set reg ev$i.v4si.f\[$j\]"
-        }
-}
-
-# Now execute some target code, so that GDB's register cache is flushed.
-
-#gdb_test "next" "" ""
-
-send_gdb "show endian\n"
-gdb_expect {
-    -re "(The target endianness is set automatically .currently )(big|little)( endian.*)$gdb_prompt $" {
-        pass "endianness"
-       set endianness $expect_out(2,string)
-    }
-    -re ".*$gdb_prompt $" {
-       fail "couldn't get endianness"
-    }
-    timeout            { fail "(timeout) endianness" }
-}
-
-# And then read the E500 registers back, to see that
-# a) the register write above worked, and
-# b) the register read (below) also works.
-
-if {$endianness == "big"} {
-set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x0, 0x1, 0x0, 0x1., v8_int8 = .0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1.."
-} else {
-set vector_register ".uint64 = 0x100000001, v2_float = .0x0, 0x0., v2_int32 = .0x1, 0x1., v4_int16 = .0x1, 0x0, 0x1, 0x0., v8_int8 = .0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0.."
-}
-
-for {set i 0} {$i < 32} {incr i 1} {
-        gdb_test "info reg ev$i" "ev$i.*$vector_register" "info reg ev$i"
-}
-
-# Test wether the GPRs are updated accordingly. (GPRs are just the lower
-# 32 bits of the EV registers.)
-
-set general_register "0x1\[ \t\]+1"
-
-for {set i 0} {$i < 32} {incr i 1} {
-        gdb_test "info reg r$i" "r$i.*$general_register" "info reg r$i"
-}
-
-# Now redo the same tests, but using the print command.
-# Note: in LE case, the char array is printed WITHOUT the last character.
-# Gdb treats the terminating null char in the array like the terminating
-# null char in a string and doesn't print it. This is not a failure, but
-# the way gdb works.
-
-if {$endianness == "big"} {
-     set decimal_vector ".uint64 = 4294967297, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .0, 1, 0, 1., v8_int8 = ..0.0.0.001.0.0.0.001.."
-} else {
-     set decimal_vector ".uint64 = 0x0000000100000001, v2_float = .1.*e-45, 1.*e-45., v2_int32 = .1, 1., v4_int16 = .1, 0, 1, 0., v8_int8 = ..001.0.0.0.001.0.0.0.001.0.0.0.001.0.0.."
-}
-
-for {set i 0} {$i < 32} {incr i 1} {
-        gdb_test "print \$ev$i" ".* = $decimal_vector" "print ev$i"
-}
-
-for {set i 0} {$i < 32} {incr i 1} {
-         set pattern$i ".*ev$i.*"
-         append pattern$i $vector_register
-}
-
-send_gdb "info powerpc vector\n"
-gdb_expect_list "info powerpc vector" ".*$gdb_prompt $" {
-[$pattern0]
-[$pattern1]
-[$pattern2]
-[$pattern3]
-[$pattern4]
-[$pattern5]
-[$pattern6]
-[$pattern7]
-[$pattern8]
-[$pattern9]
-[$pattern10]
-[$pattern11]
-[$pattern12]
-[$pattern13]
-[$pattern14]
-[$pattern15]
-[$pattern16]
-[$pattern17]
-[$pattern18]
-[$pattern19]
-[$pattern20]
-[$pattern21]
-[$pattern22]
-[$pattern23]
-[$pattern24]
-[$pattern25]
-[$pattern26]
-[$pattern27]
-[$pattern28]
-[$pattern29]
-[$pattern30]
-[$pattern31]
-}
-
-# We must restart everything, because we have set important registers to
-# some unusual values.
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-if ![runto_main] then {
-    gdb_suppress_tests
-}
-
-gdb_test "break vector_fun" \
- "Breakpoint 2 at.*e500-regs.c, line \[0-9\]+\\." \
- "Set breakpoint at vector_fun"
-
-# Actually it is nuch easier to see these results printed in hex.
-# gdb_test "set output-radix 16" \
-#   "Output radix now set to decimal 16, hex 10, octal 20." \
-#   "Set output radix to hex"
-
-gdb_test "continue" \
-  "Breakpoint 2, vector_fun .a=.-2, -2., b=.1, 1.*e500-regs.c.*ev_create_s32 .2, 2.;" \
-  "continue to vector_fun"
-
-# Do a next over the assignment to vector 'a'. 
-gdb_test "next" ".*b = \\(vector int\\) __ev_create_s32 \\(3, 3\\);" \
-  "next (1)"
-
-# Do a next over the assignment to vector 'b'. 
-gdb_test "next" "c = __ev_and \\(a, b\\);" \
-  "next (2)"
-
-# Now 'a' should be '0x02020202...' and 'b' should be '0x03030303...'
-gdb_test "print/x a" \
-  ".*= .0x2, 0x2." \
-  "print vector parameter a"
-
-gdb_test "print/x b" \
-  ".*= .0x3, 0x3." \
-  "print vector parameter b"
-
-# If we do an 'up' now, and print 'x' and 'y' we should see the values they
-# have in main, not the values they have in vector_fun.
-gdb_test "up" ".1.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);" \
-  "up to main"
-
-gdb_test "print x" \
-  ".*= .-2, -2." \
-  "print vector x"
-
-gdb_test "print y" \
-  ".*= .1, 1." \
-  "print vector y"
-
-# now go back to vector_func and do a finish, to see if we can print the return
-# value correctly.
-
-gdb_test "down" \
-  ".0  vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*c = __ev_and \\(a, b\\);" \
-  "down to vector_fun"
-
-gdb_test "finish" \
-  "Run till exit from .0  vector_fun \\(a=.2, 2., b=.3, 3.\\) at.*e500-regs.c.*main \\(\\) at.*e500-regs.c.*z = vector_fun \\(x, y\\);.*Value returned is.*= .2, 2." \
-  "finish returned correct value"
-
-
-