Patches are now upstream.
Enable epoll support since any modern kernel/toolchain supports it.
Interworking requires Hotspot functionality which we didn't enable
before so introduce a new option for them.
While at it group and sort the options in a more lean and friendly way.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
if BR2_PACKAGE_WPA_SUPPLICANT
+config BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT
+ bool "Enable AP mode"
+ help
+ With this option enabled, wpa_supplicant can act as an
+ access point much like hostapd does with a limited feature set.
+ This links in parts of hostapd functionality into wpa_supplicant,
+ making it bigger but dispensing the need for a separate hostapd
+ binary in some applications hence being smaller overall.
+
config BR2_PACKAGE_WPA_SUPPLICANT_EAP
bool "Enable EAP"
help
Enable support for EAP.
+config BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT
+ bool "Enable HS20"
+ help
+ Enable Hotspot 2.0 and IEEE 802.11u interworking functionality.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG
+ bool "Enable syslog support"
+ help
+ Enable support for sending debug messages to syslog.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WPS
+ bool "Enable WPS"
+ help
+ Enable support for Wi-Fi Protected Setup (WPS).
+
config BR2_PACKAGE_WPA_SUPPLICANT_CLI
bool "Install wpa_cli binary"
help
config BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE
bool "Install wpa_passphrase binary"
help
- Install wpa_passphrase command line utility
-
-config BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT
- bool "Enable support for soft AP"
- help
- With this option enabled, wpa_supplicant can act as
- access point. This can be used for open and WPA2-Personal networks
- (optionally, with WPS); this links in parts of hostapd functionality
- into wpa_supplicant.
+ Install wpa_passphrase command line utility.
config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_OLD
bool "Enable support for old DBus control interface"
help
Add introspection support for new DBus control interface.
-config BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG
- bool "Enable syslog support"
- help
- Enable support for sending debug messages to syslog
-
-config BR2_PACKAGE_WPA_SUPPLICANT_WPS
- bool "Enable support for WPS"
- help
- Enable support for Wi-Fi Protected Setup (WPS)
-
endif
+++ /dev/null
-From 88853aedf6cc4a152442b5bb2c4946683df6ff66 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Thu, 13 Feb 2014 15:29:09 +0200
-Subject: [PATCH] Fix CONFIG_WPS_NFC=y build without CONFIG_P2P=y
-
-Some of the control interface operations for P2P were not properly
-protected with #ifdef CONFIG_P2P.
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
----
- wpa_supplicant/ctrl_iface.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
-diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
-index ddddad3..ed332da 100644
---- a/wpa_supplicant/ctrl_iface.c
-+++ b/wpa_supplicant/ctrl_iface.c
-@@ -951,6 +951,7 @@ static int wpas_ctrl_nfc_get_handover_req_wps(struct wpa_supplicant *wpa_s,
- }
-
-
-+#ifdef CONFIG_P2P
- static int wpas_ctrl_nfc_get_handover_req_p2p(struct wpa_supplicant *wpa_s,
- char *reply, size_t max_len,
- int ndef)
-@@ -973,6 +974,7 @@ static int wpas_ctrl_nfc_get_handover_req_p2p(struct wpa_supplicant *wpa_s,
-
- return res;
- }
-+#endif /* CONFIG_P2P */
-
-
- static int wpas_ctrl_nfc_get_handover_req(struct wpa_supplicant *wpa_s,
-@@ -1001,10 +1003,12 @@ static int wpas_ctrl_nfc_get_handover_req(struct wpa_supplicant *wpa_s,
- wpa_s, reply, max_len, ndef);
- }
-
-+#ifdef CONFIG_P2P
- if (os_strcmp(pos, "P2P-CR") == 0) {
- return wpas_ctrl_nfc_get_handover_req_p2p(
- wpa_s, reply, max_len, ndef);
- }
-+#endif /* CONFIG_P2P */
-
- return -1;
- }
-@@ -1032,6 +1036,7 @@ static int wpas_ctrl_nfc_get_handover_sel_wps(struct wpa_supplicant *wpa_s,
- }
-
-
-+#ifdef CONFIG_P2P
- static int wpas_ctrl_nfc_get_handover_sel_p2p(struct wpa_supplicant *wpa_s,
- char *reply, size_t max_len,
- int ndef, int tag)
-@@ -1052,6 +1057,7 @@ static int wpas_ctrl_nfc_get_handover_sel_p2p(struct wpa_supplicant *wpa_s,
-
- return res;
- }
-+#endif /* CONFIG_P2P */
-
-
- static int wpas_ctrl_nfc_get_handover_sel(struct wpa_supplicant *wpa_s,
-@@ -1084,6 +1090,7 @@ static int wpas_ctrl_nfc_get_handover_sel(struct wpa_supplicant *wpa_s,
- os_strcmp(pos, "WPS-CR") == 0, pos2);
- }
-
-+#ifdef CONFIG_P2P
- if (os_strcmp(pos, "P2P-CR") == 0) {
- return wpas_ctrl_nfc_get_handover_sel_p2p(
- wpa_s, reply, max_len, ndef, 0);
-@@ -1093,6 +1100,7 @@ static int wpas_ctrl_nfc_get_handover_sel(struct wpa_supplicant *wpa_s,
- return wpas_ctrl_nfc_get_handover_sel_p2p(
- wpa_s, reply, max_len, ndef, 1);
- }
-+#endif /* CONFIG_P2P */
-
- return -1;
- }
-@@ -1160,6 +1168,7 @@ static int wpas_ctrl_nfc_report_handover(struct wpa_supplicant *wpa_s,
- struct wpabuf *req, *sel;
- int ret;
- char *pos, *role, *type, *pos2;
-+#ifdef CONFIG_P2P
- char *freq;
- int forced_freq = 0;
-
-@@ -1169,6 +1178,7 @@ static int wpas_ctrl_nfc_report_handover(struct wpa_supplicant *wpa_s,
- freq += 6;
- forced_freq = atoi(freq);
- }
-+#endif /* CONFIG_P2P */
-
- role = cmd;
- pos = os_strchr(role, ' ');
-@@ -1237,11 +1247,14 @@ static int wpas_ctrl_nfc_report_handover(struct wpa_supplicant *wpa_s,
-
- if (os_strcmp(role, "INIT") == 0 && os_strcmp(type, "WPS") == 0) {
- ret = wpas_wps_nfc_report_handover(wpa_s, req, sel);
-+#ifdef CONFIG_AP
- } else if (os_strcmp(role, "RESP") == 0 && os_strcmp(type, "WPS") == 0)
- {
- ret = wpas_ap_wps_nfc_report_handover(wpa_s, req, sel);
- if (ret < 0)
- ret = wpas_er_wps_nfc_report_handover(wpa_s, req, sel);
-+#endif /* CONFIG_AP */
-+#ifdef CONFIG_P2P
- } else if (os_strcmp(role, "INIT") == 0 && os_strcmp(type, "P2P") == 0)
- {
- ret = wpas_p2p_nfc_report_handover(wpa_s, 1, req, sel, 0);
-@@ -1249,6 +1262,7 @@ static int wpas_ctrl_nfc_report_handover(struct wpa_supplicant *wpa_s,
- {
- ret = wpas_p2p_nfc_report_handover(wpa_s, 0, req, sel,
- forced_freq);
-+#endif /* CONFIG_P2P */
- } else {
- wpa_printf(MSG_DEBUG, "NFC: Unsupported connection handover "
- "reported: role=%s type=%s", role, type);
---
-1.8.3.2
-
+++ /dev/null
-From 9c29d48725fd40a82407a89f193cf009aeef9745 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@qca.qualcomm.com>
-Date: Mon, 19 May 2014 23:25:38 +0300
-Subject: [PATCH] X.509: Fix internal TLS/X.509 validation of PKCS#1
- signature
-
-Verify that there is no extra data after the hash field. This is needed
-to avoid potential attacks using additional data to construct a value
-that passes the RSA operation and allows the hash value to be forged.
-
-Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
----
- src/tls/x509v3.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/src/tls/x509v3.c b/src/tls/x509v3.c
-index a9483cb7fc2f..751a268e1caf 100644
---- a/src/tls/x509v3.c
-+++ b/src/tls/x509v3.c
-@@ -1783,6 +1783,15 @@ skip_digest_oid:
- return -1;
- }
-
-+ if (hdr.payload + hdr.length < data + data_len) {
-+ wpa_hexdump(MSG_INFO,
-+ "X509: Extra data after certificate signature hash",
-+ hdr.payload + hdr.length,
-+ data + data_len - hdr.payload - hdr.length);
-+ os_free(data);
-+ return -1;
-+ }
-+
- os_free(data);
-
- wpa_printf(MSG_DEBUG, "X509: Certificate Digest matches with "
---
-2.0.0.rc2
-
+++ /dev/null
-From e6d83cc7babb978ba53ae8686159b41ab0f448cc Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@qca.qualcomm.com>
-Date: Mon, 19 May 2014 23:26:19 +0300
-Subject: [PATCH] PKCS #1: Allow only BT=01 for signature in internal TLS
-
-Based on PKCS #1, v1.5, 10.1.3, the block type shall be 01 for a
-signature. This avoids a potential attack vector for internal TLS/X.509
-implementation.
-
-Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
----
- src/tls/pkcs1.c | 29 ++++++++++-------------------
- 1 file changed, 10 insertions(+), 19 deletions(-)
-
-diff --git a/src/tls/pkcs1.c b/src/tls/pkcs1.c
-index b6fde5ee868a..af58a42987c6 100644
---- a/src/tls/pkcs1.c
-+++ b/src/tls/pkcs1.c
-@@ -142,35 +142,26 @@ int pkcs1_decrypt_public_key(struct crypto_rsa_key *key,
- * BT = 00 or 01
- * PS = k-3-||D|| times (00 if BT=00) or (FF if BT=01)
- * k = length of modulus in octets
-+ *
-+ * Based on 10.1.3, "The block type shall be 01" for a signature.
- */
-
- if (len < 3 + 8 + 16 /* min hash len */ ||
-- plain[0] != 0x00 || (plain[1] != 0x00 && plain[1] != 0x01)) {
-+ plain[0] != 0x00 || plain[1] != 0x01) {
- wpa_printf(MSG_INFO, "LibTomCrypt: Invalid signature EB "
- "structure");
- return -1;
- }
-
- pos = plain + 3;
-- if (plain[1] == 0x00) {
-- /* BT = 00 */
-- if (plain[2] != 0x00) {
-- wpa_printf(MSG_INFO, "LibTomCrypt: Invalid signature "
-- "PS (BT=00)");
-- return -1;
-- }
-- while (pos + 1 < plain + len && *pos == 0x00 && pos[1] == 0x00)
-- pos++;
-- } else {
-- /* BT = 01 */
-- if (plain[2] != 0xff) {
-- wpa_printf(MSG_INFO, "LibTomCrypt: Invalid signature "
-- "PS (BT=01)");
-- return -1;
-- }
-- while (pos < plain + len && *pos == 0xff)
-- pos++;
-+ /* BT = 01 */
-+ if (plain[2] != 0xff) {
-+ wpa_printf(MSG_INFO, "LibTomCrypt: Invalid signature "
-+ "PS (BT=01)");
-+ return -1;
- }
-+ while (pos < plain + len && *pos == 0xff)
-+ pos++;
-
- if (pos - plain - 2 < 8) {
- /* PKCS #1 v1.5, 8.1: At least eight octets long PS */
---
-2.0.0.rc2
-
+++ /dev/null
-From 6c5be116dd6997f68e524247751cff53c74519d7 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@qca.qualcomm.com>
-Date: Mon, 19 May 2014 23:26:43 +0300
-Subject: [PATCH] PKCS #1: Enforce minimum padding for decryption in
- internal TLS
-
-Follow the PKCS #1 v1.5, 8.1 constraint of at least eight octets long PS
-for the case where the internal TLS implementation decrypts PKCS #1
-formatted data. Similar limit was already in place for signature
-validation, but not for this decryption routine.
-
-Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
----
- src/tls/pkcs1.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/src/tls/pkcs1.c b/src/tls/pkcs1.c
-index af58a42987c6..ea3e6171a1d1 100644
---- a/src/tls/pkcs1.c
-+++ b/src/tls/pkcs1.c
-@@ -113,6 +113,11 @@ int pkcs1_v15_private_key_decrypt(struct crypto_rsa_key *key,
- pos++;
- if (pos == end)
- return -1;
-+ if (pos - out - 2 < 8) {
-+ /* PKCS #1 v1.5, 8.1: At least eight octets long PS */
-+ wpa_printf(MSG_INFO, "LibTomCrypt: Too short padding");
-+ return -1;
-+ }
- pos++;
-
- *outlen -= pos - out;
---
-2.0.0.rc2
-
#
################################################################################
-WPA_SUPPLICANT_VERSION = 2.1
+WPA_SUPPLICANT_VERSION = 2.2
WPA_SUPPLICANT_SITE = http://hostap.epitest.fi/releases
WPA_SUPPLICANT_LICENSE = GPLv2/BSD-3c
WPA_SUPPLICANT_LICENSE_FILES = README
WPA_SUPPLICANT_CONFIG_SET =
WPA_SUPPLICANT_CONFIG_ENABLE = \
+ CONFIG_ELOOP_EPOLL \
CONFIG_IEEE80211AC \
CONFIG_IEEE80211N \
CONFIG_IEEE80211R \
- CONFIG_INTERWORKING \
CONFIG_INTERNAL_LIBTOMMATH
WPA_SUPPLICANT_CONFIG_DISABLE = \
WPA_SUPPLICANT_CONFIG_DISABLE += CONFIG_EAP
endif
+ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT),y)
+ WPA_SUPPLICANT_CONFIG_ENABLE += CONFIG_HS20 \
+ CONFIG_INTERWORKING
+endif
+
ifeq ($(BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT),y)
WPA_SUPPLICANT_CONFIG_ENABLE += \
CONFIG_AP \
projects / buildroot.git / commitdiff